Business Ideas for Manufacturing of Adhesive (Fevicol Type ...

www.entrepreneurindia.co www.niir.org

Y-1760

http://www.entrepreneurindia.co/

http://www.niir.org/

INTRODUCTION


Adhesives are a broad term that refers to

any substance that can be used to keep,

fasten, or bind two or more materials or

objects (i.e. substrates) together when

placed between their surfaces. The adhesion

(i.e., bond strength) created between

substrates by the adhesive is largely

determined by the adhesive's properties-

specifically, its adhesion and cohesion.




Due to the fact that these properties are the

primary mechanisms underlying adhesives,

measuring the failure point of both properties

for each adhesive available aids in

determining the best adhesive for use in a

given application based on the technical

requirements and specifications.




Adhesives are commonly used in a number

of residential, commercial, and industrial

applications for permanent, semi-

permanent, and temporary attachment

purposes. Load carrying ability, chemical

composition, reactivity or inertness, and

shape are some of the characteristics that

can be used to classify and categorise the

wide variety of adhesives available.




Each of these adhesives has unique

properties and benefits, however, as with

adhesive and cohesive strengths, the

suitability of each property or feature (and

the corresponding adhesive) is determined by

the application.




COMMON TYPES OF ADHESIVES

Anaerobic Adhesives: Acrylic-based

adhesives that cure in the absence of air are

known as anaerobic adhesives. The curing

process is accelerated when metal is

present. This type of adhesive usually has a

low viscosity, comes in liquid and paste

forms, and is used to secure, seal, and

preserve close-fitting and structural parts.




Cyanoacrylates Adhesives: Adhesives that

cure in the presence of moisture and

ultraviolet (UV) light are known as

cyanoacrylate adhesives (e.g., Krazy Glue ®, a

brand of Toagosei Co., Ltd). This form of

adhesive comes in a range of viscosity levels,

from low to high, and can be used on porous

and non-porous surfaces. Because of its low

shear strength, it is not appropriate for

structural applications.




Epoxy Adhesives: Epoxies are often found

in single-part and multi-part structures.

These adhesives have good shear and peel

strength (even in extreme temperatures

and environments) and can be used to fill

gaps and bind dissimilar substrates.




Hot Glue: The term "hot glue" refers to a form

of hot melt adhesive made from

thermoplastic compounds. This adhesive has

a high tackiness and can be used on both

porous and non-porous substrates. In most

cases, hot glue solidifies as it cools, but

certain varieties may be cured by moisture or

UV light




White Glue: White glue (e.g., Elmer's® Glue, a

trademark of Elmer's Products, Inc.) is a

popular polyvinyl acetate (PVA) glue

traditionally used for arts and crafts. This

adhesive involves contact and pressure

during solidification and is ideal for porous

substrates such as fabric, cardboard, paper,

and wood.




BENEFITS OF ADHESIVES

The creation of new products for a wide range

of applications adds to the processing

technology's challenges. This is especially

true when different materials must be joined

to form composite components that maintain

their individual beneficial properties. This

begs the question: which joining technique is

capable of joining these various materials

while preserving their unique properties?




Traditional joining methods have a number of

well-known drawbacks. Within the heat-

affected environment, thermal techniques

such as welding change the material's specific

properties. Mechanical techniques such as riv-

eting or the use of screws only allow for force

transfer at specific points; additionally,




drilling holes in the work parts to be joined

“damages” and thereby weakens the

materials. Bonding technology, on the

other hand, is expected to play an

increasingly important role in industry and

the handicraft sector in the future.




This is Due to Four Major Factors:

Material: Bonding technology can be used to

bind almost any desired combination of

materials with each other, resulting in long-

lasting bonds, with expert application.




Processing: Line of Production The use of

bonding technology in manufacturing

processes enables the substrates' material

properties to be preserved. The bonding

process requires relatively little heat input

as compared to welding and

soldering/brazing. Unlike when rivets or

screws are used, there is no harm.




Joining: The two aforementioned

considerations allow the unique material

properties of substrates to be optimally

exploited in components during product

manufacture. This enables the use of

modern building techniques.




Design: Panels bonding technology may also be used to

incorporate customized additional properties into the part

during the actual joining process. Furthermore, the use of

bonding technology in industrial production can save time,

speed up the manufacturing process, and thus provide real

economic benefits. Internal decks can now be bonded into the

primary structure in shipbuilding, removing the time-

consuming straightening work that would be needed if the

inside decks were connected by welding.




MARKET OUTLOOK

By 2026, the Indian adhesives and sealants market is expected

to have grown at an annual rate of 8.07 percent, reaching USD

1,703.68 million (2021-2026). The increasing demand from the

packaging industry and the country's rising construction

industry are two major factors driving the market studied. On

the other hand, the slowing of the automotive industry and

the negative effect of COVID-19 are impeding the market's

growth.




Residential development is being driven by population growth

and urbanization in developing countries such as China, India,

Indonesia, Vietnam, Brazil, and Mexico. In these countries, there

is a growing demand for permanent housing, which is driving

demand for adhesives and sealants. Adhesives and sealants are

used in a variety of building applications, including carpet, tiling,

wallpapers, and exterior insulation systems. Curtain wall panels

and insulating glass units are also kept in place with adhesives

and sealants. As a result, the construction industry's growing

demand for adhesives and sealants is a major market driver.




KEY PLAYERS

Anabond Ltd.

Arofine Polymers Ltd.

C I C O Technologies Ltd.

Century Plyboards (India) Ltd.

D H Resins & Chemicals Pvt. Ltd.

D I C India Ltd.

Pidilite Industries Ltd.

Renuka Adhesives Ltd.

Resinova Chemie Ltd.

S R Continental Ltd.

Uflex Ltd.




MACHINERY PHOTOGRAPHS

EMULSIFYING TANK-750L SELF PRIMING MAGNETIC PUMP




2 GEAR PUMPS BAG TYPE FILTER




REACTOR INVERTER



PROJECT AT A

GLANCE




COST OF PROJECT MEANS OF FINANCE

Particulars Existing Proposed Total Particulars Existing Proposed Total

Land & Site Development

Exp. 0.00 32.00 32.00Capital 0.00 41.36 41.36

Buildings 0.00 40.60 40.60Share Premium 0.00 0.00 0.00

Plant & Machineries 0.00 47.12 47.12Other Type Share Capital 0.00 0.00 0.00

Motor Vehicles 0.00 6.00 6.00Reserves & Surplus 0.00 0.00 0.00

Office Automation

Equipments 0.00 18.00 18.00Cash Subsidy 0.00 0.00 0.00

Technical Knowhow Fees &

Exp. 0.00 5.00 5.00Internal Cash Accruals 0.00 0.00 0.00

Franchise & Other Deposits 0.00 0.00 0.00

Long/Medium Term

Borrowings 0.00 124.09 124.09

Preliminary& Pre-operative

Exp 0.00 2.00 2.00Debentures / Bonds 0.00 0.00 0.00

Provision for Contingencies 0.00 4.21 4.21Unsecured Loans/Deposits 0.00 0.00 0.00

Margin Money - Working

Capital 0.00 10.53 10.53

TOTAL 0.00 165.46 165.46TOTAL 0.00 165.46 165.46





Year Annualised Book

Value

Debt Dividend Retained

Earnings

Payout Probable

Market

Price

P/E

Ratio

Yield Price/

Book Value

EPS CEPS Per Share

Per

Share Per Share

No.of

Times

` ` ` ` ` % ` % ` %

1-2 5.64 9.29 15.64 24.00 0.00 100.00 5.64 0.00 5.64 1.00 0.00

2-3 8.83 12.02 24.47 18.00 0.00 100.00 8.83 0.00 8.83 1.00 0.00

3-4 11.90 14.69 36.38 12.00 0.00 100.00 11.90 0.00 11.90 1.00 0.00

4-5 14.82 17.25 51.19 6.00 0.00 100.00 14.82 0.00 14.82 1.00 0.00

5-6 17.54 19.67 68.73 0.00 0.00 100.00 17.54 0.00 17.54 1.00 0.00




Year D. S. C. R. Debt / -

Deposits

Debt

Equity

as-

Equity

Total

Net

Worth

Return

on Net

Worth

Profitability Ratio Assets

Turnover

Ratio

Current

Ratio

Individu

al

Cumulativ

e

Overall GPM PBT PAT Net

Contrib

ution

P/V

Ratio

(Number of times) (Number of times) % % % % % %

Initial 3.00 3.00

1-2 1.38 1.38 1.53 1.53 2.11 18.47% 9.38% 6.48% 182.97 50.83% 1.83 0.99

2-3 1.74 1.55 0.74 0.74 1.16 21.07% 13.31% 8.70% 213.47 50.83% 1.96 1.36

3-4 2.15 1.73 2.13 0.33 0.33 0.65 22.79% 16.01% 10.26% 243.96 50.83% 1.96 1.82

4-5 2.61 1.93 0.12 0.12 0.38 23.91% 17.87% 11.35% 274.46 50.83% 1.87 2.34

5-6 3.14 2.13 0.00 0.00 0.21 24.60% 19.11% 12.09% 304.95 50.83% 1.75 4.11




BEP

BEP - Maximum Utilisation Year 5

Cash BEP (% of Installed Capacity) 59.50%

Total BEP (% of Installed Capacity) 62.40%

IRR, PAYBACK and FACR

Internal Rate of Return .. ( In %age ) 27.09%

Payback Period of the Project is ( In Years ) 2 Years 3 Months

Fixed Assets Coverage Ratio ( No. of times ) 6.129




Major Queries/Questions Answered in the Report?

1. What is Adhesive (Fevicol Type) Manufacturing industry ?

2. How has the Adhesive (Fevicol Type) Manufacturing industry performed so far and how will it perform in the coming years ?

3. What is the Project Feasibility of Adhesive (Fevicol Type) Manufacturing Plant ?

4. What are the requirements of Working Capital for setting up Adhesive

(Fevicol Type) Manufacturing plant ?




5. What is the structure of the Adhesive (Fevicol Type)ManufacturingBusiness and who are the key/major players ?

6. What is the total project cost for setting up Adhesive (Fevicol

Type)Manufacturing Business?

7. What are the operating costs for setting up Adhesive (Fevicol Type)

Manufacturing plant ?

8. What are the machinery and equipment requirements for setting upAdhesive (Fevicol Type) Manufacturing plant ?




9. Who are the Suppliers and Manufacturers of Plant & Machinery forsetting up Adhesive (Fevicol Type) Manufacturing plant ?

10. What are the requirements of raw material for

setting up Adhesive (Fevicol Type) Manufacturing plant ?

11. Who are the Suppliers and Manufacturers of Raw materials for

setting up Adhesive (Fevicol Type) Manufacturing Business?

12. What is the Manufacturing Process of Adhesive (Fevicol Type)?




13. What is the total size of land required for setting up Adhesive (FevicolType) Manufacturing plant ?

14. What will be the income and expenditures for Adhesive (Fevicol Type)

Manufacturing Business?

15. What are the Projected Balance Sheets of Adhesive (Fevicol Type)

Manufacturing plant ?

16. What are the requirement of utilities and overheads for setting upAdhesive (Fevicol Type) Manufacturing plant?

17. What is the Built up Area Requirement and cost for setting upAdhesive (Fevicol Type) Manufacturing Business?




18. What are the Personnel (Manpower) Requirements for setting upAdhesive (Fevicol Type) Manufacturing Business?

19. What are Statistics of Import & Export for Adhesive (Fevicol Type) ?

20. What is the time required to break-even of Adhesive (Fevicol Type)Manufacturing Business?

21.What is the Break-Even Analysis of Adhesive (Fevicol Type)

Manufacturing plant?

22.What are the Project financials of Adhesive (Fevicol Type)





23. What are the Profitability Ratios of Adhesive (Fevicol Type)

Manufacturing Project?

24. What is the Sensitivity Analysis-Price/Volume of Adhesive (FevicolType) Manufacturing plant?

25. What are the Projected Pay-Back Period and IRR of Adhesive(Fevicol Type) Manufacturing plant?

26. What is the Process Flow Sheet Diagram of Adhesive (Fevicol Type)Manufacturing project?




27. What are the Market Opportunities for setting up Adhesive (FevicolType) Manufacturing plant?

28. What is the Market Study and Assessment for setting up Adhesive(Fevicol Type) Manufacturing Business?

29. What is the Plant Layout for setting up Adhesive (Fevicol Type)





Table of

Contents

of the

Project Report



https://niir.org/profile-project-reports/


1. PROJECT LOCATION

• DISTRICT PROFILE & GEOTECHNICAL SITE CHARACTERIZATION

• General

• Demographics

• Climate

• Map

• Economy and Industry

• Agriculture

• Major Industries

• Education

• Transport




2. INTRODUCTION

3. CATEGORIES OF ADHESIVES

• THEORY OF ADHESION

• ADSORPTION

• TYPES OF ADSORPTION

4. USES & APPLICATIONS

• USING ADHESIVES

• APPLY ADHESIVE




5. B.I.S. SPECIFICATIONS

• IS 15477:2004 ADHESIVES FOR USE WITH CERAMIC TILES AND MOSAICS.

• IS 15684:2006 EXTENDERS FOR USE IN SYNTHETIC RESIN ADHESIVES (UREA-FOMALDEHYDE) FOR PLYWOOD — CODE OF PRACTICE.

• IS: 4835 – 1979 SPECIFICATION FOR POLYVINYL ACETATE DISPERSION BASED

ADHESIVES FOR WOOD.

• IS: 848 – 2006 SYNTHETIC RESIN ADHESIVES FOR PLYWOOD (PHENOLIC AND AMINO

PLASTIC) – SPECIFICATION.




6. MARKET SURVEY

• ADHESIVES

• NEWLY EMERGING INDICATORS

• KEY PLAYERS

• ADHESIVES DEMAIND: PAST AND FUTURE

• MARKET STRUCTURE

• LEADING BRANDS

7. EXPORT & IMPORT: ALL COUNTRIES

• EXPORT: ALL COUNTRIES

• IMPORT: ALL COUNTRIES




8. FINANCIALS & COMPARISON OF MAJOR PLAYERS/COMPANIES

• ABOUT FINANCIAL STATEMENTS OF CMIE DATABASE

• PROFITS & APPROPRIATIONS

• TOTAL LIABILITIES

• TOTAL ASSETS

• NET CASH FLOW FROM OPERATING ACTIVITIES

• SECTION – I

• Name of Company with Contact Details

• Name of Director(S)

• Plant Capacity

• Location of Plant

• Name of Raw Material(S) Consumed With Quantity & Cost




• SECTION – II• Assets• Cash Flow• Cost as % Ge of Sales• Forex Transaction• Growth in Assets & Liabilities• Growth in Income & Expenditure• Incorporation Year, Industry Group, Industry Type and Main Product• Income & Expenditure• Liabilities• Liquidity Ratios• Profitability Ratio• Profits• Return Ratios• Stock Price and Ratio• Structure of Assets & Liabilities (%)• Working Capital & Turnover Ratios




9. COMPANY PROFILE OF MAJOR PLAYERS

10.EXPORT STATISTICS OF INDIA

• EXPORT: STATISTICS FOR ADHESIVES

11.PRESENT MANUFACTURERS

12.WATER PROOFING SYSTEMS

13.CHARACTERIZATION OF CASTOR OIL

• STRUCTURE OF CASTOR OIL

• COMPOSITION OF CASTOR OIL

• CALULATION OF RAW MATERIALS




14. MANUFACTURING PROCESS OF WATER PROOFING ADHEISVE

• PROCESS DETAILS

• REACTION MECHANISM

• PROCESS FLOW DIAGRAM

15. RAW MATERIAL DETAILS

16. MANUFACTURING PROCESS OF POLYVINYL ACETATE ADHESIVE

• FORMULATIONS

• PROCESS

• FORMULATION FOR POLYVINYL ACETATE EMULSION

• PROCESS FLOW DIAGRAM




17. EXPERIMENTAL ADHESIVE FORMULATION TEST RESULTS

18. SUPPLIERS OF PLANT & MACHINERY

19. SUPPLIERS OF RAW MATERIAL

20. PHOTOGRAPHS/IMAGES FOR REFERENCE

• PRODUCT PHOTOGRAPHS

• MACHINERY PHOTOGRAPHS

• RAW MATERIAL PHOTOGRAPHS

21. PLANT LAYOUT




Project Financials

• Project at a Glance Annexure

• Assumptions for Profitability workings ………………………..1

• Plant Economics…………………………………………………..2

• Production Schedule………………………………………………3

• Land & Building……………………………………………….……4

Factory Land & Building

Site Development Expenses




• Plant & Machinery……………………………………………..……..5

Indigenous Machineries

Other Machineries (Miscellaneous, Laboratory etc.)

• Other Fixed Assets………………………………………..........….......6

Furniture & Fixtures

Pre-operative and Preliminary Expenses

Technical Knowhow

Provision of Contingencies

• Working Capital Requirement Per Month……………………….…7

Raw Material

Packing Material

Lab & ETP Chemical Cost

Consumable Store




• Overheads Required Per Month and Per Annum………….…….…8

Utilities & Overheads (Power, Water and Fuel Expenses etc.)

Royalty and Other Charges

Selling and Distribution Expenses

• Salary and Wages …………………………………………....……..9

• Turnover Per Annum ……………………………………….....…10

• Share Capital…………………………………………………….....11

Equity Capital

Preference Share Capital




• Annexure 1 :: Cost of Project and Means of Finance

• Annexure 2 :: Profitability and Net Cash Accruals

Revenue/Income/Realisation

Expenses/Cost of Products/Services/Items

Gross Profit

Financial Charges

Total Cost of Sales

Net Profit After Taxes

Net Cash Accruals




• Annexure 3 :: Assessment of Working Capital requirements

Current Assets

Gross Working Capital

Current Liabilities

Net Working Capital

Working Note for Calculation of Work-in-process

• Annexure 4 :: Sources and Disposition of Funds




• Annexure 5 :: Projected Balance Sheets

ROI (Average of Fixed Assets)

RONW (Average of Share Capital)

ROI (Average of Total Assets)

• Annexure 6 :: Profitability Ratios

D.S.C.R

Earnings Per Share (EPS)

Debt Equity Ratio




• Annexure 7 :: Break-Even Analysis

Variable Cost & Expenses

Semi-Variable/Semi-Fixed Expenses

Profit Volume Ratio (PVR)

Fixed Expenses / Cost

B.E.P




• Annexure 8 to 11 :: Sensitivity Analysis-Price/Volume

Resultant N.P.B.T

Resultant D.S.C.R

Resultant PV Ratio

Resultant DER

Resultant ROI

Resultant BEP




• Annexure 12 :: Shareholding Pattern and Stake Status

Equity Capital

Preference Share Capital

• Annexure 13 :: Quantitative Details-Output/Sales/Stocks

Determined Capacity P.A of Products/Services

Achievable Efficiency/Yield % of Products/Services/Items

Net Usable Load/Capacity of Products/Services/Items

Expected Sales/ Revenue/ Income of Products/ Services/ Items




• Annexure 14 :: Product wise Domestic Sales Realisation

• Annexure 15 :: Total Raw Material Cost

• Annexure 16 :: Raw Material Cost per unit

• Annexure 17 :: Total Lab & ETP Chemical Cost

• Annexure 18 :: Consumables, Store etc.

• Annexure 19 :: Packing Material Cost

• Annexure 20 :: Packing Material Cost Per Unit




• Annexure 21 :: Employees Expenses

• Annexure 22 :: Fuel Expenses

• Annexure 23 :: Power/Electricity Expenses

• Annexure 24 :: Royalty & Other Charges

• Annexure 25 :: Repairs & Maintenance Expenses

• Annexure 26 :: Other Manufacturing Expenses

• Annexure 27 :: Administration Expenses

• Annexure 28 :: Selling Expenses




• Annexure 29 :: Depreciation Charges – as per Books (Total)

• Annexure 30 :: Depreciation Charges – as per Books (P & M)

• Annexure 31 :: Depreciation Charges - as per IT Act WDV (Total)

• Annexure 32 :: Depreciation Charges - as per IT Act WDV (P & M)

• Annexure 33 :: Interest and Repayment - Term Loans

• Annexure 34 :: Tax on Profits

• Annexure 35 :: Projected Pay-Back Period and IRR




Reasons for Buying our Report:

• This report helps you to identify a profitable project for investing or

diversifying into by throwing light to crucial areas like industry size,

market potential of the product and reasons for investing in the product

• This report provides vital information on the product like it’s

characteristics and segmentation

• This report helps you market and place the product correctly by

identifying the target customer group of the product




• This report helps you understand the viability of the project by disclosing

details like machinery required, project costs and snapshot of other

project financials

• The report provides a glimpse of government regulations applicable on

the industry

• The report provides forecasts of key parameters which helps to anticipate

the industry performance and make sound business decisions



OUR APPROACH

• Our research reports broadly cover Indian markets, present

analysis, outlook and forecast for a period of five years.

• The market forecasts are developed on the basis of

secondary research and are cross-validated through

interactions with the industry players

• We use reliable sources of information and databases. And

information from such sources is processed by us and

included in the report





Scope of the Report

The report titled “Market Survey cum Detailed Techno Economic Feasibility Report on

Adhesive (Fevicol Type).” provides an insight into Adhesive (Fevicol Type) market in India

with focus on uses and applications, Manufacturing Process, Process Flow Sheets, Plant

Layout and Project Financials of Adhesive (Fevicol Type) project. The report assesses the

market sizing and growth of the Indian Adhesive (Fevicol Type) Industry. While expanding

a current business or while venturing into new business, entrepreneurs are often faced

with the dilemma of zeroing in on a suitable product/line. And before

diversifying/venturing into any product, they wish to study the following aspects of the

identified product:




• Good Present/Future Demand

• Export-Import Market Potential

• Raw Material & Manpower Availability

• Project Costs and Payback Period

We at NPCS, through our reliable expertise in the project consultancy and market

research field, have demystified the situation by putting forward the emerging business

opportunity in the Adhesive (Fevicol Type) sector in India along with its business

prospects. Through this report we have identified Adhesive (Fevicol Type) project as a

lucrative investment avenue.




Tags

#DetailedProjectReport #businessconsultant #NPCS

#entrepreneurindia #startupbusiness #BusinessPlan

#ProjectReport #InvestInStartups #StartupIdea

#startupinvestment #StartupBusinessPlan #StartupPlan

#AdhesiveManufacturing #AdhesiveProduction

#AdhesiveMarket #AdhesiveBusiness #Adhesive



(NPCS)

can provide Detailed Project Report on

Adhesive

(Fevicol Type)


See moreProject Reports & Profiles

BOOKS

Market Research Report

https://www.entrepreneurindia.co/project-and-profile-details/Adhesives (Fevicol Type)

https://www.entrepreneurindia.co/project-and-profile-details/Adhesives (Fevicol Type)



https://www.niir.org/profile-project-reports/

https://www.niir.org/books/

https://www.entrepreneurindia.co/market-research-report


Visit us at

www.entrepreneurindia.co

www.niir.org






Take a look at Niir Project

Consultancy Services on

#Street View

https://goo.gl/VstWkd

Locate us on

Google Mapshttps://goo.gl/maps/BKkUtq9gevT2




https://goo.gl/maps/BKkUtq9gevT2


OUR CLIENTS

Our inexhaustible Client list includes public-sector companies,

Corporate Houses, Government undertaking, individual

entrepreneurs, NRI, Foreign investors, non-profit organizations and

educational institutions from all parts of the World. The list is just a

glimpse of our esteemed & satisfied Clients.

Click here to take a look

https://goo.gl/G3ICjV



https://goo.gl/G3ICjV


Select and Choose the Right Business Startup for You

(Instant Online Project Identification and Selection)

Finding the right startup business is one of the most popular subject today. Starting a

business is no easy endeavor, but the time, effort, and challenges can be worth it if you

succeed. To give yourself the best chance to be successful, take your time to carefully

find the right business for you. We, at NPCS, endeavor to make business selection a

simple and convenient step for any entrepreneur/startup. Our expert team, by

capitalizing on its dexterity and decade's long experience in the field, has created a list of

profitable ventures for entrepreneurs who wish to diversify or venture. The list so

mentioned is updated regularly to give you a regular dose of new emerging opportunities.

Visit:https://www.entrepreneurindia.co/project-identification



https://www.entrepreneurindia.co/project-identification


Download Complete List of Project Reports:

Detailed Project Reports

Visit:- https://www.entrepreneurindia.co/complete-project-list

NPCS is manned by engineers, planners, specialists, financial experts, economic analysts

and design specialists with extensive experience in the related industries.

Our Market Survey cum Detailed Techno Economic Feasibility Report provides an insight

of market in India. The report assesses the market sizing and growth of the Industry.

While expanding a current business or while venturing into new business, entrepreneurs

are often faced with the dilemma of zeroing in on a suitable product/line.



https://www.entrepreneurindia.co/complete-project-list




And before diversifying/venturing into any product, they wish to study the following

aspects of the identified product:

Good Present/Future Demand

Export-Import Market Potential

Raw Material & Manpower Availability

Project Costs and Payback Period

The detailed project report covers all aspect of business, from analyzing the market,

confirming availability of various necessities such as Manufacturing Plant, Detailed

Project Report, Profile, Business Plan, Industry Trends, Market Research, Survey,

Manufacturing Process, Machinery, Raw Materials, Feasibility Study, Investment

Opportunities, Cost and Revenue, Plant Economics, Production Schedule,




Working Capital Requirement, uses and applications, Plant Layout, Project Financials,

Process Flow Sheet, Cost of Project, Projected Balance Sheets, Profitability Ratios, Break

Even Analysis. The DPR (Detailed Project Report) is formulated by highly accomplished

and experienced consultants and the market research and analysis are supported by a

panel of experts and digitalized data bank.

We at NPCS, through our reliable expertise in the project consultancy and market

research field, have demystified the situation by putting forward the emerging business

opportunity in India along with its business prospects……Read more





AN ISO 9001: 2015 CERTIFIED COMPANY



• One of the leading reliable names in industrial world for providing the most

comprehensive technical consulting services

• We adopt a systematic approach to provide the strong fundamental support

needed for the effective delivery of services to our Clients’ in India &

abroad


ABOUT US




We at NPCS want to grow with you by providing solutions scale to suit your new

operations and help you reduce risk and give a high return on application

investments. We have successfully achieved top-notch quality standards with a

high level of customer appreciation resulting in long lasting relation and large

amount of referral work through technological breakthrough and innovative

concepts. A large number of our Indian, Overseas and NRI Clients have

appreciated our expertise for excellence which speaks volumes about our

commitment and dedication to every client's success.




o Project Identification

o Detailed Project Reports/Pre-feasibility Reports

o Market Research Reports

o Business Plan

o Technology Books and Directory

o Industry Trend

o Databases on CD-ROM

o Laboratory Testing Services

o Turnkey Project Consultancy/Solutions

o Entrepreneur India (An Industrial Monthly

Journal)

What do we offer?




How are we

different ?

o We have two decades long experience in project consultancy and market research field

o We empower our customers with the prerequisite know-how to take sound business

decisions

o We help catalyze business growth by providing distinctive and profound market

analysis

o We serve a wide array of customers , from individual entrepreneurs to Corporations

and Foreign Investors

o We use authentic & reliable sources to ensure business precision




Our Approach

Requirement collection

Thorough analysis of the project

Economic feasibility study of the Project

Market potential survey/research

Report Compilation




Who do we Serve?

o Public-sector Companies

o Corporates

o Government Undertakings

o Individual Entrepreneurs

o NRI’s

o Foreign Investors

o Non-profit Organizations, NBFC’s

o Educational Institutions

o Embassies & Consulates

o Consultancies

o Industry / trade associations




Sectors We Cover

o Ayurvedic And Herbal Medicines, Herbal Cosmetics

o Alcoholic And Non Alcoholic Beverages, Drinks

o Adhesives, Industrial Adhesive, Sealants, Glues, Gum & Resin

o Activated Carbon & Activated Charcoal

o Aluminium And Aluminium Extrusion Profiles & Sections,

o Bio-fertilizers And Biotechnology

o Breakfast Snacks And Cereal Food

o Bicycle Tyres & Tubes, Bicycle Parts, Bicycle Assembling

o Bamboo And Cane Based Projects

o Building Materials And Construction Projects

o Biodegradable & Bioplastic Based Projects

o Chemicals (Organic And Inorganic)

o Confectionery, Bakery/Baking And Other Food

o Cereal Processing

o Coconut And Coconut Based Products

o Cold Storage For Fruits & Vegetables

o Coal & Coal Byproduct




o Copper & Copper Based Projects

o Dairy/Milk Processing

o Disinfectants, Pesticides, Insecticides, Mosquito Repellents,

o Electrical, Electronic And Computer based Projects

o Essential Oils, Oils & Fats And Allied

o Engineering Goods

o Fiber Glass & Float Glass

o Fast Moving Consumer Goods

o Food, Bakery, Agro Processingo Fruits & Vegetables Processing

o Ferro Alloys Based Projects

o Fertilizers & Biofertilizers

o Ginger & Ginger Based Projects

o Herbs And Medicinal Cultivation And Jatropha (Biofuel)

o Hotel & Hospitability Projects

o Hospital Based Projects

o Herbal Based Projects

o Inks, Stationery And Export Industries




o Infrastructure Projects

o Jute & Jute Based Products

o Leather And Leather Based Projects

o Leisure & Entertainment Based Projects

o Livestock Farming Of Birds & Animals

o Minerals And Minerals

o Maize Processing(Wet Milling) & Maize Based Projects

o Medical Plastics, Disposables Plastic Syringe, Blood Bags

o Organic Farming, Neem Products Etc.

o Paints, Pigments, Varnish & Lacquer

o Paper And Paper Board, Paper Recycling Projects

o Printing Inks

o Packaging Based Projects

o Perfumes, Cosmetics And Flavours

o Power Generation Based Projects & Renewable Energy Based Projects

o Pharmaceuticals And Drugs

o Plantations, Farming And Cultivations

o Plastic Film, Plastic Waste And Plastic Compounds

o Plastic, PVC, PET, HDPE, LDPE Etc.




o Potato And Potato Based Projects

o Printing And Packaging

o Real Estate, Leisure And Hospitality

o Rubber And Rubber Products

o Soaps And Detergents

o Stationary Products

o Spices And Snacks Food

o Steel & Steel Products

o Textile Auxiliary And Chemicals

o Township & Residential Complex

o Textiles And Readymade Garments

o Waste Management & Recycling

o Wood & Wood Products

o Water Industry(Packaged Drinking Water & Mineral Water)

o Wire & Cable







• To get a detailed scenario of the industry along with its

structure and classification•• To provide a comprehensive analysis of the industry by

covering aspects like:•• Growth drivers of the industry•• Latest market trends•• Insights on regulatory framework•• SWOT Analysis•• Demand-Supply Situation•• Foreign Trade•• Porters 5 Forces Analysis




• To provide forecasts of key parameters which helps to

anticipate the industry performance•• To help chart growth trajectory of a business by detailing

the factors that affect the industry growth•• To help an entrepreneur/manager in keeping abreast with

the changes in the industry•• To evaluate the competitive landscape of the industry by

detailing:•• Key players with their market shares•• Financial comparison of present players




• Venturist/Capitalists•• Entrepreneur/Companies•• Industry Researchers

• Investment Funds•• Foreign Investors, NRI’s•• Project Consultants/Chartered Accountants•• Banks•• Corporates

• Click here for list



https://www.entrepreneurindia.co/client-list


Online Research

Industry JournalsSecondaryResearch

PrimaryResearch

Industry IndustrySources Associations

Companies

Surveys

One-on-oneInteractions

Databases

Industry Experts



www.entrepreneurindia.co www.niir.orgwww.entrepreneurindia.co

Present Status

(Indian &

Global)

Macro Environment

Indian

Market

Outlook & Forecasts

(5Years)

Demand Assessment

SWOT & Porters

Analysis

Internal Market

Analysis

www.niir.org






• Our research team comprises of

experts from various financial fields:

• MBA’s

• Industry Researchers

• Financial Planners

• Research veterans with decades of

experience




1. Overview

2. Market Analysis

2.1Growth Drivers

2.2Emerging Trends in the Industry

2.3Regulatory Framework

2.4SWOT Analysis

2.5Herfindahl–Hirschman Index (HHI)

3. Market Forecasts

4. Key Players

5. Key Financials and Analysis

5.1 Contact Information

5.2 Key Financials

5.3 Financial comparison

5.4 Industry Size & Outlook



91

Take a look at on #Street View



Contact us

106-E, Kamla Nagar, Opp. Mall ST,

New Delhi-110007, India.

Email: [email protected] ,

[email protected]

Tel: +91-11-23843955, 23845654, 23845886

Mobile: +91-9097075054, 8800733955

Fax: +91-11-23845886

Website : www.entrepreneurindia.co ,

www.niir.org

Take a look at on #StreetView




mailto:[email protected]

mailto:[email protected]





https://www.linkedin.com/company/niir-project-

consultancy-services

https://www.facebook.com/NIIR.ORG

https://www.youtube.com/user/NIIRproject

https://twitter.com/npcs_in

https://www.pinterest.com/npcsindia/



https://www.linkedin.com/company/niir-project-consultancy-services

https://www.facebook.com/NIIR.ORG

https://www.youtube.com/user/NIIRproject

https://twitter.com/npcs_in

https://www.pinterest.com/npcsindia/


For more information, visit us at: www.niir.org

www.entrepreneurindia.co





Date post:	27-Jan-2022
Category:	Documents
Upload:	others
View:	8 times
Download:	0 times

Business Ideas for Manufacturing of Adhesive (Fevicol Type ...

Documents