Head office : Toos Industrial Estate, phase no.1,
South kooshesh St. Mashhad, Iran
Factory1 : Chenaran Industrial Estate , Sanat no.20
.Chenaran ,(Mashhad),Iran
Factory2 : Toos Industrial Estate, phase no.2 .
Andishe no.10 .Mashhad, Iran
Tel :+98(51)46139016 - 23Fax : +98(51)46139024Email : [email protected] www.Denasooleh.com
Business Name : Dena Industrial Group Adress :
Content
1. Introduction………………......... 2. Foreign business partners....3. Products…………………………….4. Production Phases……………..5. Machinery and equipment...6. Human Resource7. Quality management system8. Photos………………………………..
ü Holding - Poly Sooleh Holding includes eight company.
ü With over 25 years of experience, DENA Co and POLYSOOLEH Co.
ü The production capacity of the DENA company for steel structures is 2500 tons
and Polysooleh is 5000 tons in one working shift per month.
ü DENA Sooleh is located on 100,000 square meters land and has over 30,000
square meters of production facilities.
ü Polysooleh is located on 150,000 square meters land and has over 60,000
square meters of production facilieties.
With over 25 years of experience, DENA and Polysooleh is active inmanufacturing and installation of steel structures such as industrial plants andresidential-commercial high-rises. This company is currently, Using from thepresence of experienced engineers and technicians, who are quiteknowledgeable about up to date standards and regulations. They start off theprojects by calculation and design procedure for static structures which leadsto preparing precise technical drawings.
The production capacity of our company for manufacturing, shot blasting,transport and assembling of steel structures is over 7500 tons in one workingshifts per month; This is possible only by having more than 250,000 squaremeters area and over 90,000 square meters of production facilities.
The features which distinguish DENA Co. from other companies are: our highproduction capacity, high quality and speed of production and installation ofstructures. These important features are achieved by the help of its skilledpersonnel, modern equipments and powerful management principles.
Business NameRepresentativeAddress
Business Reg. No.Established DateIncorporated DateBusiness CategoryBusiness ProductsFactory Size
Number of Employees
Shinwoo Heavy Industriies Co., Ltd.Ahn,Byoung-KuDaeji agriculture & Industrial Complex,Daeji-myeon, Changyeong-gun, Gyeongsangnam-doTel, 055)532-8300 Fax, 055)532-8360Moro Agriculture & Industrial Complex,Gunbuk-myeon, Haman-gun, Gyeongsangnam-doTel, 055)5840666 Fax, 055)584-0667609-81-5951662003, 07, 012003, 06, 24Manufacturing, Wholesale and ServicesCranes, Pumps, Industrial automation equipmentsLand: 6,710m² / Building: 3,829m²Land: 23,140m² / Building: 10,560m²380
Head Office
Haman Factory
Changyeong
Haman
Projects
Projects
Certificate
Certificate
Head Office
Daeji Agriculture & Industrial Complex,
Daeji-myeon, Changyeong-gun, Gyeongsangnam-do
Tel, 055)532-8300 Fax, 055)532-8360
Haman Factory
Moro Agriculture & Industrial Complex,
Gunbuk-myeon, Haman-gun, Gyeongsangnam-do
Tel, 055)584-0666 Fax, 055)584-0667
■ History
Dec. 2005 : Company established as PRIME HEAVY INDUSTRY (Korea)
Jan. 2006 : Company established as PRIME HEAVY INDUSTRY (China)
Nov. 2006 : Certificate of registration for ISO 9001
Dec. 2013: Awarded $5 million Tower of Exports
Jul. 2015: Certificate of Conformity of Factory Production Control (CE Marking)
Dec. 2015: Awarded $10 million Tower of Exports
Feb. 2016: Certificate of registration for ISO 14001
Feb. 2016: Research and development department established
■ Engineering (Investment Company)
Jan. 2006 : JUYOUNG ENGINEERING CO., LTD : 3D Structure and Shop Dwg.
HEAD OFFICE :ADDRESS : Room 706, 17 YEOUIDAEBANG-RO 65-GIL, YEONGDEUNGPO-GU, SEOUL, KOREA (07332) CONTACT No. : TEL. +82-2-2068-3111 / FAX. +82-2-2068-3112
KOREA FACTORYADDRESS : 64 DEONDEURE-GIL YEOJU-SI, GYEONGGI-DO, KOREA (12659) CONTACT No. : TEL. +82-31-882-3118 / FAX. +82-31-882-3178
CHINA FACTORYADDRESS : NO.1 NANNING ROAD, ECONOMIC DEVELOPMENT ZONE, PENGLAI, SHANDONG PROVINCE, CHINA (265609) CONTACT No. : TEL. +86-535-598-0288 / FAX. +86-535-598-0266
DESCRIPTIONSECTIONFACTORYW160 M X L250MFACTORY SIZE
KOREA FACTORY
40,000 ㎡FACTORY AREA
1,500TON / MONTH(18,000 TON / YEAR)FABRICATED OF STEEL STRUCTURE
500TON / MONTH(6,000TON/YEAR)FABRICATED OF EQUIPMENT
2,400TON / Month (28,000ton/YEAR) H3,000 X W1,000 X WEB 60t X FNG 80tWELD BUILT-UP FOR H-SHAPE
DESCRIPTIONSECTIONFACTORYW200m x L250mFACTORY SIZE
CHINA FACTORY
50,705 ㎡FACTORY AREA1,500TON / MONTH (18,000 TON / YEAR)
FABRICATED OF STEEL STRUCTURE
500TON / MONTH (6,000TON / YEAR)
FABRICATED OF EQUIPMENT
2,400TON / Month (28,000ton / YEAR) H3,000 X W1,000 X WEB 60t X FNG 80t
WELD BUILT-UP FOR H-SHAPE
Projects
Projects
Projects12.7 BASF /YEOSU CFBC POWER PLANT
Projects
Certificate
China Factory(YANTAI) Korea Factory
(YEOJU)
• Industrial structures:
Construction of industrial plants and warehouses, such as:
Ø SAMAN DAROU PRODUCTION PLANT.
ØMASHHAD INTERNATIONAL FINANCIAL & ECONOMICAL CENTER PAZH
ØZAVEH CEMENT PLANT
ØBOJNOURD AIRPORT
ØKHAYAM - STEEL PLANT
• Residential and office towers:
High-rise structures , multi-storey structures, And commercial towers such as :
ØMASHHAD MALL HOTELS & COMMERCIAL COMPLEX
ØPADIDEH SHANDIZ HOTELS & COMMERCIAL COMPLEX
• Steel bridges:
Bridges over existing highways, such as sarakhs Bridge.
• Preparation of shop drawings:ü First in the engineering management office, the plans are closely surveyed. Then
by using advanced software, the experts prepare the plans in order to obtain the
approval of the clients;
ü At the same time, they develop a scheduled plan of the works, volumes and
weights of different required materials, also making estimates of standards and
development procedures of the plan;
ü The required instructions will be issued according to the scheduled plan for the
supply of necessary materials;
ü Material supply process: according to the client orders
• Ironwork :
ü Steel Sheets is usually supplied by domestic providers such as Zob Ahan
Esfahan, Mobarakeh Steel facilities and Kaavian Steel company.
ü Some of the hot rolled sections that are not produced in Iran they are
purchased from reliable sources outside of Iran ensuring the client’s approval.
Quality certificates of all the materials is presented to the client upon request.
• Bolts & Nuts and paint:
ü Bolts, Nuts and paints are the main required materials which their specifications are
stated in the contract and usually purchased from domestic sources or imported from
outside, according to our restrict principle of keeping our client satisfied.
ü Meanwhile the interests of the client is ensured and quality certificates of the
purchase is placed at the disposal of the client.
• Testing the materials:
ü All items entering the factory are inspected by the quality control department for
quantity and quality, to ensure compliance with technical specifications before
being docked and transported to warehouses.
ü Essentially, the issuance of factory warehouse receipt is subject to the approval
of quality control unit.
ü In addition, samples of the imported products are sent off to accredited
laboratories for additional tests in order to expand the scope of this unit’s activities
to ensure satisfaction of the client.
• Cutting:Each component of a structure is identified and cut into their suitable sizes andthickness using multiple tools, resulting in pieces with specific characteristics andedges that are later joined together according the main plan.
• Assembling:The already cut components are joined together according to the shop drawings in another unit using special tools and equipments. Joined components are then connectedto each other by spot welding. At the end of this stage the appearance of the piece iscompleted.
• Welding:Discharged components from the assembly unit are transferred to the welding unitsand according to the procedure specified in the technical documentation known asthe Treaty of Welding Procedure System are welded together.
• Cleaning:
In this stage, components are taken to another unit, where trained and experiencedstaff perform welding tack, cleaning and grinding activities on them. The componentsdischarged from this stage, which are transferred to painting unit, should be free of anyextra slag, spater, arc etc.
• Sand blasting/ shot blasting:
The cleaned components are transferred to sand blasting/shot blast unit and inaccordance with the technical specifications of the contract are blasted with silica sandor steel pellets.
• Painting:
The cleaned components from the sand blasting unit must be immediately transferredto the paint shop. Different paints depending on their chemical basis or shadesdefined in terms of their thickness of dry film are applied on the components in a dust-free environment.
• Packing and Shipping:
The final phase of construction includes the packing of the painted parts. Our qualified
personnel carry out this stage so that during the transfer no damage is ocurred, which
ultimately may lead to non-compliance or failure in one of the dimensions of the parts.
At the same time, placing protective material prevents damage to the paint during the
transfer. Proper arrangement of painted pieces together maximizes the load capacity, as
well as saving the costs of the shipment.
• Installation:steel structure pieces sent to the project site are installed by our qualified installationpersonnel in accordance with the approved plans.
• Inspection and supervision:Steel structure pieces sent to the project site are inspected by our experiencedpersonnel to comply exactly to the approved drawings.
• Planning and project control:Loads sent to the project site are installed in accordance with approved plans andfeatures by our qualified and skilled installation personnel
TRANSFER EQUIPMENT
• Overhead Crane, capacities: 2, 5,
10, 16, and 25 ton; Site Mobile
Crane, capacity: 10 ton;
• Kato Crane, capacity: 30 ton;
• Lift Truck, capacities: 3 to 35 ton;
NumberFacilities
2GantryCrane
37Overhead
1Up to 25 Ton
Lift truck
1Up to 20 Ton
1Up to 17 Ton
2Up to 10 Ton
2Up to 7 Ton
2Up to 3 Ton
1BackbreakingTrailer
4Insole
1 Tractor
1 Tow truck
PRODUCTION MACHINERY
• 7 in 1 cutting and punching machine;
• Brake Press machine , capacities: 300 and 500 ton;
• Guillotine,3mm, 20 to 30 mm cutting ;
• Guillotine,2mm, 6 mm cutting ;
• Guillotine,6mm, 20 to 25 mm cutting ;
• Large Radial Press Machine;
• 60,250 ton Kick Press;
• Guillotine, 6m, 20 to 25 mm cutting capacity; Magnetic Drill;
• Z Punch; Straightener;
• Hydraulic Press, 250 ton; Box Production Line;
• Automatic H Beam Straightening Line;
PRODUCTION MACHINERY
• Shot Blaster, 300*300 cm, 20 nozzles; Decoiler Wheel, up to 16 mm thickness;
• Lathe, 1.5m;
• CNC Lathe;
• Beveling machines;
• Hack Saw Machine;
• Z Punch; Straightener; Hydraulic Press, 250 ton;
• Box Production Line;
• Air Cutting Machine;
• CNC Drilling Machine;
• Radial Drilling Machine ;
• Plate Straighter;
PREPRATION EQUIPMENT
• Castellated Beam Production
Machine; Friction Saw;
• Band Saw for column cutting;
NumberFacilities 2 Roll 463 Ton
Impact Press 1Multifunctional 1160 Ton
Hydraulic Press 1200 Ton1250 Ton140 Ton11.5 m
exfoliation 1Exfoliation page 22000 * 6
Guillotine 53000 * 2526000 * 202CNC
Air Cuting 4Straighter17Rail/Electric2Fire
Saw 1Narrow 1 Z Punch
56Simple manualGrinding Stone
2walled2CNC Radial
Drill14Simple Radial2column Radial1Triaxial
37magnet
ASSEMBLE EQUIPMENT
• Double-Nozzle Submerged
Welding Machine;
• Single-Nozzle Submerged Welding
Machine;
• Welding Rectifier;
• CO2 Welding Machine;
• Automatic Air Cutting Machine;
• Sandblasting;
• Diesel Welding Machine;
• Sandblasting Compressor;
• Automatic H Beam Welding Line;
NumberFacilities
121CO2
Welding machine 6Electroslag
14Submerged
120 mm
Straighter
140 mm
1Mecanical
Box Maker
3Hydraulic
2H Maker
3Beveling machine
2Shot blasting machine
INACCESSIBLE EQUIPMENT
• 400-KVA ; Emergency Power
Generator;
• CO2 Tank, capacity: 25 ton;
• 2-MW power transformer;
• Argon and oxygen tanks, capacity:
13 ton;
• Shot Blasting, 110*150 cm, 6
nozzles;
NumberFacilities
2CO2
Tank 1Argon
2Oxygen
37.5 m³/h
Compressor
38.3 m³/h
6315 KVAPower transformer
Numberpersonnel
2PHD graduate
6MSc graduate
32Bachelor degree
17Technical operator
230Skilled workers
ü IMS Management Systems
ü ISO 9001 : 2008
ü ISO 3834 - 2
ü ISO 14001 : 2004
ü OHSAS 18001 : 2007
Address :Toos Industrial Estate, phase ISouth kooshesh St.Mashhad, Iran
Tel :+98(51)46139016 - 23Fax : +98(51)46139024Email : [email protected] www.denasooleh.com