433 Council Drive, Fort Wayne, IN 46825
WWW.CHARLESTONAUCTIONS.COM
SUN MON TUE WED THU FRI SAT
30
MARCH3
7142128
4 528 10 11
15 16 17 1822 23 24 25 26
27
6 121913
20
WED.& THUR., MARCH 9TH & 10TH AT 9:00 AM (CST)
HUGE 2-DAY ONSITE AUCTION W/ WEBCAST
Sale Location: 1371 Hodgesville Road, Dothan, AL 36301Sale Date and Time: Wed.& Thur., March 9th & 10th at 9:00 AM (CST)Preview Inspection: Tuesday, March 8th from 9 AM - 5 PM (CST)
Sale Date and Time: Wed.& Thur., March 9th & 10th at 9:00 AM (CST)
Preview Inspection: Tuesday, March 8th from 9 AM - 5 PM (CST)
GENIE Z-4522 BOOM LIFT
Onsite Auction with Simultaneous Webcast
DRIVING DIRECTIONSMAPFrom: Dothan Regional Airport
1. Head S on Airport Dr 0.1 mi 2. Sharp right to stay on Airport Dr 3. Slight right at Flightline Dr 4. Take the 1st left onto E Cadet St 0.1 mi 5. Take the 1st left onto S Atlantic St 279 ft 6. Take the 1st right onto Headquarters St 0.5 mi 7. Slight left at Lee St 0.1 mi 8. Turn left at Co Rd 112 Napier Field Rd 3.4 mi 9. Turn right to stay on Napier Field Rd 335 ft 10.Turn left at US-231 S 2.0 mi 11.Turn right at Ross Clark Cir 12.Turn right at Hodgesville Rd
LOOK FOR AUCTION SIGNS!1371 Hodgesville Road, Dothan, AL 36301
UPCOMING AUCTIONS
PREVIEW INSPECTION: Tuesday, March 8th from 9:00 AM - 5:00 PM
GENERAL ELECTRIC COMPANY
DC Motors Facility Closing:
DC Motors Facility Closing:
1371 Hodgesville Road, Dothan, AL 36301
9
GENERAL ELECTRIC COMPANY
DC Motors Facility Closing:
AU C T I O N Major Manufacturers Are Uploading Equipment Daily
www.CharlestonEquipmentMarket.com
Buy & Sell Industrial Equipment On Our Global Internet Marketplace
Free Registration, Free Unlimited Listings, Free Transaction Management Online Auctions Happening Now!
GENERAL ELECTRIC COMPANYMultiple Auctions & Locations
Onsite & Online Bidding
Winchester, VA Online Only M.R.O. Auction
March 7th at 10AM - March 11th at 12PM125 Apple Valley Road, Winchester, VA
Onsite Auction w/ WebcastWednesday, March 16th at 10 AM
125 Apple Valley Road, Winchester, VA
Oakville, ON - CanadaSale Date & Time TBD
420 South Service Road East, Oakville, ON
Additional Locations Coming Soon!
View Auction Calendar Online AtWWW.CHARLESTONAUCTIONS.COM
AUC T I O NPANGBORN ROTOBLAST SYSTEM
BidSpotter.com®
Live Internet Bidding
1
433 Council Drive, Fort Wayne, Indiana 46825Call: 877-357-8124 • 260-373-0850 • Fax: 260-373-0854
www.CharlestonAuctions.comAlabama Auction License # 5086
Late ModelView Complete Catalog atwww.CharlestonAuctions.com
(1 OF 2) MOTCH CHUCKERS
(1 OF 2) STRIPPIT FABRICATORS
WARNER & SWASEY NC TURNING LATHE
MONARCH METALIST TURNING CENTER
KASTO AUTOMATIC BAND SAW
SALE LOCATION: 1371 Hodgesville Road, Dothan, AL 36301
Call A Charleston Representative Today! (877) 357-8124
HUGE 2-DAY ONSITE AUCTION W/ SIMULTANEOUS WEBCAST
View Complete Catalog at www.CharlestonAuctions.com
2004 CG CNC BURN TABLE
MONARCH DUAL LOADING MACHINING CENTER
CAT 50 TOOLING
CINCINNATI 1/4” X 6’ SHEAR
SHELDON ENGINE LATHE
TOOL CUTTERS AND GRINDERS
TORIT DUST COLLECTOR
TAURUS LOAD HANDLER
(1 OF 3) LANDIS UNIVERSAL OD GRINDERS
(1 OF 3) MONARCH LATHES
(1 OF 3) NORTON OD GRINDERS
PACIFIC 500BD BENDER
HYSTER NARROW AISLE LIFT
(1 OF 3) TOYODA CNC MACHINING CENTERS
Sale Location: 1371 Hodgesville Road, Dothan, AL 36301
RINSE STATIONS
(1 OF 30) MILLER WIRE WELDERS VARIOUS RIDGID PIPE THREADERS (1 OF 5) RADIAL ARM DRILLING MACHINES
GENERAL ELECTRIC COMPANY
HUGE 2-DAYEVENT
OVER 1500 LOTS TO BE SOLD!
1984 MONARCH VMC 75Model: VMC75, S/N: 84051GE Mark Century 2000 Controls HIPERDEX 360 Indexer
FOSDICK Radial Arm Drill, S/N: 14016W, 4’ Radius
1947 MONARCH Lathe, Swing-12.5”, DBC-20”Model: 10”EE, S/N: 28181
Huge Qty. (Over 500pc Count) CAT 50 Tool Holders
Huge Qty. of Secondary Machine Tooling: Machine Vises, Indexer Heads, Rotary Tables, Collet Indexers & Radius Dressers
(2) WARNER & SWASEY 3A Turret LathesModel: 3500S/N: 15784443342092, 15784442494432
WARNER & SWASEY 35C Chucking MachineModel: 769, S/N: 2788162
CINCINNATI Milicron HMC, 12 Pallet PositionModel: T-10 AO, S/N: 31216Z2184-0005
1988 MONARCH Dual LoaderModel: VMC150, S/N: 88525, GE Fanuc Controls3 Phase, 460 Volt, 60 Cycle, 25 KVA
1981 MONARCH VMC 75S/N: 81283, GE Mark Century 1050 Controls
1979 MONARCH VCM 75S/N: 79163, GE Mark Century 1050 Controls
1977 MONARCH VMC 150S/N: 79553, GE Mark Century 1050 Controls
1985 MONARCH VMC 150, Model: VMC150S/N: 85531, w/ HIPERDEX 360 IndexerGE Mark Century 2000 Controls
1955 BARNES Vertical Multi Spindle Drill PressS/N: 2214
WARNER & SWASEY Turret Chucker LatheModel: 3AC, S/N: 2012843
Rebuilt 1992 JONES & LAMSON TNC Combi 312S/N: 90006/235370, GE Fanuc Series 15-T ControlsJORGENSEN Chip Conveyor
1976 WARNER & SWASEY SG10 LatheModel: 4880, S/N: 2669560GE Mark Century 550 Controls, Spindle RPM 41-1508
1980 CINCINNATI Milicron Cinturn 185 NC Turning Lathe, Model: MO, S/N: 5305S18-80-003GE Mark Century 1050 Controls18 X 80 Shaft Turning Center
1976 MOTCH 135-VNC Vertical NC Chucker LatheS/N: VT-1076-76
(2) 1963 WARNER & SWASEY ZAC Chucker LatheModel: W-S2AC, S/N: 1949424, NA
1987 MONARCH Turning CenterModel: METALIST, S/N: 53456, 20” x 40” GE Mark Century 2000 Controls, 20” Swing
1988 MONARCH Turning Center, 24” x 66”Model: METALIST IA, S/N: 53697ALLEN BRADLEY Series 8200 Controls, 24” Swing
(4) Armature Varnish Treaters
GE Dyno 4 Pole Test Table, 180 HP, 2500/6000 RPM
1984 GE MD No Load Test Table, S/N: LOC.13-1-1330
Production Equipment
GE 4 Pole Test Dyno, 300 HP
GE 4 Pole Test Dyno, 900 HP
WARNER & SWASEY SC-28 Chucker LatheModel: M4530, S/N: 3121006
(3) TOYODA FH 55 CNC Machining CentersModel: FH55, S/N: NMU1139, NM7011, NM6524GE Fanuc Series 15-M Controls48-Position Tool Changer
GIDDINGS & LEWIS Numerilathe 32C ChuckerModel: 32C, S/N: 535-59GE Fanuc Series 15-T Controls
WARNER & SWASEY CNC Chucker LatheS/N: 2567190, 3 Phase
GE Elevator FurnaceModel: 79382, S/N: 158L622G1, 3 Phase
CINCINNATI MILACRON SHAFT TURN MACHINE
CINCINNATI T10 HORIZONTAL MACHINING CENTER
LANDIS UNIVERSAL OD GRINDER
29 30 31
General Electric Company Winchester, VirginiaMaintenance, Repair & Operations
Online Only AuctionBegins: Mon., March 7th at 10AMEnds: Fri., March 11th at 12PMOnline bidding at Bidspotter.com
125 Apple Valley Rd Winchester, VA
Parts & Components used in Maintenance, Repair & Operations:
Motors, Manifolds, Fittings, Switches, Relays, Bearings, Filters
SALE LOCATION: 1371 Hodgesville Road, Dothan, AL 36301DATE & TIME: Wed. & Thurs., March 9th & 10th at 9:00 a.m. (CST)PREVIEW INSPECTION: Tuesday, March 8th from 9:00 a.m. to 5:00 p.m. TERMS OF SALE: A 12% Buyer’s Premium will be charged on all purchases. A 15% Buyer’s Premium will be charged if using a credit card. Charleston Auctions is now accepting all major credit cards. For online auction terms, please visit Bidspotter.com. All items are sold “as is, where is” and must be paid for IN FULL, CASH, CHECK, OR CREDIT CARD accompanied by A LETTER FROM THE PAYOR’S BANK GUARANTEEING UNQUALIFIED PAYMENT TO CHARLESTON AUCTIONS for this sale.BUYERS: Buyers are responsible for all risk of loss, property damage, personal injury caused by removal, and all costs of removal of items/lots purchased. A certificate of insurance reflecting adequate insurance coverage, holding Auctioneers, owners and landlords harmless against any damage must be furnished to the Auctioneer at Auctioneer’s sole discretion and request prior to such removal. Buyer’s obligations with regard to removal further include the obligation to repair and restore any damage to the real property or permanent improvements where the purchased items/lots are located. Buyers de-installing items/lots purchased MUST be or use professional, experienced, qualified de-installers and provide to Charleston Auctions a certificate of insurance or bond in an amount of no less than One Million ($1,000,000) Dollars, prior to performing such work. REMOVAL: No items will be removed without proof of payment. No item may be removed until the conclusion of the Auction. REMOVAL DATES & TIMES: Friday, March 11th thru Friday, March 25th from 9:00 a.m. to 5:00 p.m. each day (CST). Sundays are by appointment only.*NO EXCEPTIONS!*- NO RIGHT OF ABANDONMENT! $500 PENALTY (PER BUYER) for each item not removed by expiration of removal period. ABSOLUTELY NO ADDITIONAL TIME … ALL ITEMS MUST BE REMOVED BY 5 PM ON MARCH 25TH. ANY BUYER THAT HAS NOT REMOVED ALL OF THEIR ITEMS WILL BE ASSESSED A $500 PER DAY PENALTY UNTIL ALL ITEMS HAVE BEEN REMOVED! Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser. Your stamped paid receipt must be shown to checkout supervision prior to removal. Although checkout supervision will be provided, the auction company and sellers are not liable for lost or stolen items purchased at the sale.DISCLAIMER AND ABSENCE OF WARRANTIES: BIDDER SHALL NOT RELY ON ANY PHOTOGRAPH OR DESCRIPTION OF ANY KIND WHEN BIDDING. PHOTOGRAPHS AND DESCRIPTIONS ARE SUBJECT TO CHANGE FROM TIME TO TIME AND ARE NOT RELIABLE. Each potential Bidder is responsible to conduct, at their own risk and cost, their own independent inspections, investigations, inquiries, and due diligence concerning the property. Seller and Charleston, or Charleston’s agents and associates, are not responsible for any warranty as to condition of property. Bidder shall be fully responsible for confirming that each item bid on is appropriate for Bidder’s intended use. Neither Charleston nor Seller shall be responsible, in any way, for confirming or denying the specific identity or intended use of any item or piece of property. Inspection dates have been scheduled and will be staffed with auction personnel. Please feel free to inspect the property at any other time, so long as arranged in advance with Charleston. Bidder shall repair any damage to the Property done by Bidder, its representatives and agents, while conducting any Inspections. In addition, Bidder shall indemnify, defend and hold Seller harmless for any claims or damages suffered by Seller relating to actions taken by Bidder, its representatives and agents, while conducting any Inspections. The property is being sold on “AS IS, WHERE IS” basis, and no warranty or representation, either express or implied, concerning the property is made by the seller or the auction company. The information contained in this brochure is subject to verification by all parties relying on it. No liability for its accuracy, errors or omissions is assumed by the sellers or the auction company. GOVERNING LAW: Bidder agrees that no matter what State or Country Bidder resides, or location of the auction, all disputes or disagreements shall be construed according to the laws of the State of Indiana.*ITEMS ARE SUBJECT TO PRESALE
IMPORTANT INFORMATION
SALE DATE & TIME: Wed.& Thur., March 9th & 10th at 9:00 AM HUGE 2-DAY ONSITE AUCTION W/ SIMULTANEOUS WEBCAST
ONLINE BIDDING INSTRUCTIONSLive Internet Bidding
ALL ON-LINE BIDS ARE SUBJECT TO A 15% BUYER’S PREMIUM.18% BUYER’S PREMIUM IF PAID BY CREDIT CARD
TO PARTICIPATE, YOU MUST: 1. Type in www.CharlestonAuctions.com. 2. Click on the “View Catalog” button. 3. Click the blue box directly above the catalog that says “Sign up for this auction”. 4. If you are new to bidspotter.com, click on “Register” otherwise skip to step 8. 5. Fill out bidder registration. 6. Exit out and re-enter on www.bidspotter.com . 7. Click on Sign-up and then Sign In (already a bidspotter user). 8. Utilize User Name & Password emailed to you after registering. 9. Exit out again and re-enter www.bidspotter.com. 10. Click on Bid Now. 11. START BIDDING! 12. Bid with Bid Now Button for faster bidding.
BidSpotter.com®
View Complete Catalog at www.CharlestonAuctions.com
SALE LOCATION: 1371 Hodgesville Road, Dothan, AL 36301
Call A Charleston Representative Today! (877) 357-8124
PREVIEW INSPECTION: Tuesday, March 8th from 9 AM - 5 PM (CST)
View Complete Catalog at www.CharlestonAuctions.com
LEBLONDE LATHE LG QTY OF SPOOLED WIRE
VARIOUS USED MOTORS
NORTON OD GRINDER
GARDENER DENVER AIR COMPRESSOR
(OVER 30) FLOOR MOUNTED JIB CRANES
(OVER 50) BRIDGE CRANES
(OVER 100) PARTS STORAGE CABINETS
(OVER 50) FLAMMABLE STORAGE CABINETS
PRESTO ELECTRIC SCISSOR PLATFORM LIFT
HUGE QTY OF INSPECTION EQUIPMENT HYSTER 10,000# ELECTRIC FORK TRUCK
CLAUSING COLCHESTER LATHE DO ALL VERTICAL BANDSAW
DO ALL AUTOMATIC BANDSAW
DAREX DRILL SHARPENER
VARIOUS SURFACE GRINDERS
CONDEPHASE OIL WATER SEPERATOR FACTORY CAT FLOOR SCRUBBER
CRESS ELECTRIC FURNACE
HUGE QTY OF GRINDERS AND SANDERS
LG QTY OF STAND UP AND SIT DOWN FORK TRUCKS
CINCINNATI TOOL GRINDER
POWERMATIC VARIABLE SPEED DRILL VIDMAR PARTS STORAGE CABINETS
SUMMIT DRILL PRESS
HUGE 2-DAYEVENT
OVER 1500 LOTS TO BE SOLD!
(1 OF 4) DO ALL BANDSAWS
BROWN AND SHARPE TOOL GRINDER
POWERMATIC VERTICAL BANDSAW
BLACK DIAMOND DRILL SHARPENER
LELAND GIFFORD 6 HEAD GANG DRILLDO ALL VERTICAL BANDSAW
(1 OF 2) CINCINNATI TOOL GRINDERS
GRAND RAPIDS SURFACE GRINDER H-FRAME AND ARBOR PRESSES
HUGE QTY OF ELECTRIC CHAIN HOISTS
AMERICAN ENGINE LATHE
Huge Qty. of Perishable Tooling: End Mills, Cutters, Drills & Carbide
CINCINNATI Horizontal Milling MachineModel: 4, S/N: 4J4P5H-3
1970 JOHANSSON Vertical Mill, 1.5 HP Bridgeport J-Head
CINCINNATI Carlton Radial Arm Drill, 3’ Arm x 9’
HAMMOND Pedestal Snag Grinder
1968 LODGE & SHIPLEY Tool Room LatheModel: 2013, S/N: 47749DBC-78”, Swing-20.5”, 2.5” Spindle Hole
1983 LANDIS O.D. Grinder, S/N: L.O.C.13-1-017
NORTON O.D. Grinder, S/N: 27106, 460 Volt A/C
LANDIS O.D. GrinderS/N: 861-41, MARPOSS E9 Controls
TRISTATE 10” Belt Sander
BRIDGEPORT Vertical Mill, Power FeedS/N: 76526, 1 HP, 9” x 42” T Slot Table
CINCINNATI Vertical MillS/N: 5482, 12” x 52” T Slot Table
1964 LELAND-GIFFORD 4 Head Gang DrillS/N: 2V-4S-20-49, No 2, Variable Speed
JOHANSSON Vertical Drill PressS/N: 22582, 80-1200 RPM
CINCINNATI O.D. Grinder, NEWALL DROS/N: 6P4E5B-3
1980 DO ALL Horizontal Band SawModel: C1216A, S/N: 373-81633, Automatic460 Volt, 3 Phase, 60 HZ, Band Length-162”
1974 WAGNER REUTLINGEAN Cold SawModel: MGZ3245
1973 GISHOLT Turret Lathe, Model: 4, S/N: 295574
1968 GIDDINGS & LEWIS Surface GrinderModel: 20, S/N: S-20226, 6 x 18 Mag Chuck
POWERMATIC Vertical Band SawModel: 6W900, S/N: 927900236” Tilt Arbor w/ JET DC-610 Dust Collector
1964 LODGE & SHIPLEY LatheModel: 2013/17, S/N: 45671, 2.5” Spindle HoleDBC-78”, Swing-24”, Pulley Speed-1024 RPM
(3) POWERMATIC 14” Table SawsModel: 72A, Tilting Arbor
CINCINNATI Bickford Radial Arm DrillModel: 2E965, S/N: MG1672, 16” Col x 72” Arm
1966 GIDDINGS & LEWIS 5” Boring MillWizard Anilam DRO, Pendant ControlsModel: 79021, S/N: 410-9-66
CARLTON Radial Arm Drill, 6’ Arm, 19” Col.
1962 NATCO Multi Spindle Drill, S/N: E3B-103
1975 LELAND GIFFORD 6 Head Gang Drill No 2S/N: 2L-6S-20-11863
POWERMATIC Vertical Band SawModel: BW900, S/N: 8979106, 36”, Tilt Table
JOHANSSON Radial Arm Drill, S/N: 22067
K&T MILWAUKEE Universal Milling MachineModel: S15, Twin Spindle
1966 CINCINNATI Vertical Mill, S/N: AJ23V55-1
(1 OF 6) BRIDGEPORT VERTICAL MILLS
NATCO MULTISPINDLE DRILL
Material Handling Equipment8000# CLARK Electric Walk-Behind Pallet Mover, 29 VModel: ST40B, S/N: ST245-1478PM6235, 106” LH
3000# HYSTER Electric Fork Truck, 36 V, Side ShiftModel: E30XM, S/N: D114VO1544T, 189” LH
EZ-GO Electric Cargo Carrier, Built in ChargerS/N: 9398
3000# HYSTER Electric Walk-Behind Pallet MoverModel: 1030A, S/N: A307U3168X, 130” LH, 24 V
2500# CLARK Electric Fork Truck, 24 V, 106” LHModel: TW25, S/N: TW125-307-2178-671
3000# CROWN Stand-Up Order PickerModel: 305P36TT, S/N: 1A102917, 210” LH, 24 V
5000# HYSTER Electric Fork Truck, 36 V, 130” LHModel: E50A, S/N: A10BV026050W, 900 Hours
Over (20) Fork Truck Battery Chargers, 24 V & 36 V
4350# Late Model HYSTER Standup Electric Narrow Isle Picker Truck, 36 V, 272” LH, SS & 42” ForksModel: N45XMR2, S/N: F138N01744W89.9 Hoist Hours, 972 Hours, 933 Drive Hours
5000# HYSTER Electric Fork Truck, 36 V, 189” LHModel: E50XM, S/N: F108V17203W, Side Shift
5000# HYSTER Electric Fort Truck, 36/48 VModel: E50XM, S/N: F108V01406R, 3 Stage
2000# STANLEY VIDMAR STAK SYSTEMS/N: 104687-648
GATES Mobile Crimp Unit w/ Fittings, Model: 4-20
10,000# HYSTER Electric Fork Truck, 48 V, 112” LHModel: E100B, S/N: B09BD01630Y, 1016 Hrs, 6’ Forks
Machine Shop Equipment
Plant Servicing EquipmentOver (100) VIDMAR Storage Cabinets
Huge Qty. of Cabinets, Benches, Carts, Fans, Trash Cans, Safety Ladders, Shop Stands, Stools, Chairs, Tubs & Totes, Rigging & Lifting Equipment, Material Carts, Cranes, Material Racks, Scissor Lift Carts, Die Carts, Etc…
Over (60) Various Bridge & Jib Cranes, ¼ – 15 Ton Cap
Over 10,000 Feet of Various Conveyor
RIDGID 300 Power Threader, S/N: 7587008115 V, 1 Phase
Over (100) Sections of Various Pallet Racking
Large Quantity of Parts Crib Inventory Consisting of: Electrical, Plumbing, Bearings, Motors, Pneumatics, Hydraulics, PPE, Hardware, Nuts, Bolts & Fasteners, Buss Plugs, Switch Boxes, Relays, Pumps, Reducers
LIBERTY Series 500 Plus Shrink Wrapper4’ x 4’ Rotary Table
(6) TRION M3000/M30 Standard Hepa & Adsorber Module
FACTORY CAT Sweeper, Model: 48
FACTORY CAT Floor Scrubber, Model: 40
2002 GARDNER Denver Rotary Screw Air Compressor 36,997 Hours, 150 HP, Model: EAQ99K, S/N: S129575
CONDEPHAS Oil/Water SeparatorS/N: 1006716001, Unit Size Condephase 160
500# GENIE Boom LiftModel: Z-45/22, S/N: 4592-3545Platform Height-45’, 36 V, 345 Hrs
BRIDGEPORT Vertical Mill, 3 HPS/N: 92649, Power Feed, 9” x 42” T Slot Table
DO ALL Vertical Band SawModel: ML, S/N: 4712732, 3 Phase, Blade Welder
POWERMATIC Variable Speed DrillModel: 1150A, S/N: 9015V160
ROCKWELL Model 20 Drill Press
TRURUS Positioning Arm, 650# Capacity
1971 AMERICAN Engine Lathe, S/N: 7898852.5” Spindle Hole, 30” Swing x 48” BTC
BROWN & SHARPE No 13 Universal Tool GrinderS/N: 525-13-2895
CLAUSING COLCHESTER 21” Lathe, 2.5” SpindleS/N: 8/0222/05137, 21” Swing x 60” BTC
LEBLOND Engine Lathe, S/N: 548916” x 54”, 16” Swing x 54” BTC, 3” Spindle Hole
BROWN & SHARPE Surface GrinderModel: 618 Micro Master, S/N: 523-6181-5223
(2) CINCINNATI Tool GrindersModel: 2, S/N: 1D2TLK-575, 1D2T1J-632
OPTIMA Tool GrinderS/N: B198.129, 115 Volt, 3400 RPM
HAMMOND Carbide Grinder
Rebuilt 1979 NORTON O.D. Grinder, S/N: P2381
BLACK DIAMOND Drill GrinderModel: 0, ¼”-2 ½” Capacity
1959 GRAND RAPIDS Surface Grinder, Model: AS/N: 1571460, 60” x 14” Electromagnetic Chuck
CRESS Electronic FurnaceModel: C1232K, S/N: 9008
DAREX E90 Drill Grinder
SUMMIT Drill Press, Model: 3XHD, S/N: 1844
1977 MONARCH Lathe, Model: EE, S/N: EE51942
1974 CINCINNATI Monoset Tool GrinderS/N: 3152A0173
DO ALL Vertical Band SawModel: 2612-H, S/N: 248-71163, 3 Phase, 26” 24” x 30” Tilt Table, Blade Welder
WILTON Variable Speed Drill PressS/N: 48-2839, 15”, 6 Speed
DAKE H-Frame Shop PressModel: 50H, S/N: 161112
1975 PANGBORN Rotoblast SystemModel: LK-4, S/N: 6LK4-751
1991 KASTO Automatic SawModel: 420AU, S/N: 107-172-6019-87203
Fabrication EquipmentMILLER Constant Current AC/DC Arc Welding Power SourceModel: SYNCROWAVE 350, S/N: 5A750349
1972 LODGE & SHIPLEY ShearS/N: 48972-S, Asset-23352Back Gage, 10’ x 1/4”
(2) STRIPPIT Sonic 18/30 FabricatorModel: 461, S/N: 46182771, 44833171Tooled Up
NIAGARA Press BrakeModel: IB-36-5-6, S/N: 4522336 Ton, 2.5” Stroke, 4” Adj Ram, 12” SH
1979 PEXTO Power Rolls, 19”Model: MG-35-271, S/N: 60190
1982 MAY CIRCLE ShearModel: MTC-42D, S/N: 0407
MILLERMATIC “Vintage” CV/DC Wire Feeder, S/N: KH376653
1975 TAYLOR WINFIELD 75 KVA Spot Welder, Model: MG 80324
CHICAGO Finger BrakeModel: L31, S/N: 112742
RICHARDS Multiform Bender, S/N: 36-8192
MILLER Tig Rig, S/N: JB572104
MILLER Wire Welder, Internal FeedModel: MILLERMATIC 150, S/N: KD497225
HOBART 300 WelderModel: TR-300, S/N: 82WS07342
MILLER Deltaweld 451 Wire WelderModel: 451, S/N: KB036820, 3 Phase
MILLER Intelliweld 650 WelderModel: 650, S/N: KA737779
1970 PACIFIC Bender, 500 Ton BulldozerModel: 500BD, S/N: 3888
2004 CG CNC Burn TableModel: MUSTANG, S/N: G7075 Head, 3 Phase, 8’ x 18’ BedBURNY 5 CNC Controls w/ (2) Thermal Dynamics, MERLIN 6000 Cutting Systems
CINCINNATI Shear, ¼” x 6’ Mild Steel BackModel: 2506, S/N: 34887
Upcoming M.R.O. Auction