Date post: | 13-Dec-2015 |
Category: |
Documents |
Upload: | charlene-fleming |
View: | 218 times |
Download: | 0 times |
“Rhino Presentation” ARCH 1291 VISUAL STUDIES II
Pan Command• Shifts the location of
the view camera and target parallel to the view plane.
Instructions:• In the top, right, and
front viewport; right click the mouse and move in any direction. Within the frame of the viewport.
• To pan in perspective view shift and right click the mouse to move in any direction, within the frame.
Short Cuts:• Write in the command
line “pan” or click on the pan icon
Pan Command
Object is begin moved
“Rhino Presentation” ARCH 1291 VISUAL STUDIES II
Boolean Union:• Trims the shared
areas of selected polysurfaces or surfaces and creates a single polysurface from the unshared areas.
Instructions:• Create two solid
objects and make sure they are intersecting or colliding with each other.
• In the command line write “booleanunion” and press enter or click the icon. Then select the intersecting solids that you wish to union and the objects will be joined.
Boolean Operations
“Rhino Presentation” ARCH 1291 VISUAL STUDIES II
Boolean Difference: • Trims the shared areas
of selected polysurfaces with another set of polysurface or surfaces.
Instructions: • Just like Boolean
Union, you are able to either write it down in the command line or select the icon and hit enter.
• It will inform you to select the surface(s) to subtract from. Click the piece you wish to subtract from and hit enter. Then click the subtracted surface and hit enter. You will then see the outline of the object you subtracted from.
Boolean Operations