Date post: | 19-Dec-2015 |
Category: |
Documents |
View: | 214 times |
Download: | 1 times |
SECTION CONTROL FOR ANHYDROUS APPLICATIONS
By: Tyler Grimes
Soil 4213
2011
WHAT PRECISION AG MEANS TO ME
Precision AG to me is using technology to increase production while saving time and
money.Precision AG is also the ability to use products
and equipment to be effective but also economically friendly.
BOOM/SECTOINAL CONTROL
Sectional control is when certain portions of a boom or applicator is turned off as the implement enters covered area.
FLOW CONTROL
For a sprayer flow control can be utilized from the cab through GPS monitoring systems and Sprayer controllers.
ANHYDROUS APPLICATORS
Anhydrous applicators range from strip tillage to conventional tillage And range in widths from 25ft- 100+ ft
METERING
Vapor rate controller
ANHYDROUS RIG AT FARMERS GRAIN CO.
ANHYDROUS FLOW CONTROL
1. A pump to boost the pressure of anhydrous ammonia coming from the nurse tank. This pump maintains constant pressure of ammonia distributed to knives. Anhydrous ammonia can be applied consistently over a wide variation in tank pressure, even on a very cold day.2. Orifices are used at the manifold for each line going to an injection knife. These orifices keep anhydrous ammonia as a liquid until it has been split equally between the openers or knives
ANHYDROUS FLOW CONTROL
3. A flow control system is used to assure that the application rate of anhydrous ammonia is constant and to allow for variable rate application.Prices starting at $10000
ANHYDROUS FLOW CONTROL
NO-TILL KNIVES
SHUT OFF VALVES
300PSI
ECONOMIC SAVINGS
On a 60 ft tool using flow control and shutoff valves vs . Anhydrous price 60 cents per pound100 lbs per acre
Money saved per square quarter of land = $814Money saved per odd shaped quarter of land = $1338
In twelve square fields this system could pay for itself
THANK YOU
QUESTIONS