Wall: Byron Intarsio F-B/W 300x300mmFloor: Byron Apuano Matt 600x600mm
Created through a strict selection of the most precious and palatial marbles from aroundthe world, the Bryon series carefully reproduces and combines two different kinds to forma breathtaking collection of porcelain tiles.
byron
Wall: Byron Marquinia Matt 75x600mm and 600x600mmFloor: Byron Intarsio F-B/W 300x300mm
Material: Glazed porcelain
Edge: Rectified
Surface finish: Matt
Application: Floor, Wall and Feature
Nominal sizes: 195x195mm, 75x600mm, 300x300mm, 300x600mm and 600x600mm
Shade variation: V3
Slip resistance Wet pendulum test: P2
Made in Italy
Exclusive to National Tiles
Lifetime Warranty
Product Specifications
stocked
Apuano Matt195x195mm
Apuano Matt300x600mm
Apuano Matt75x600mm
Apuano Matt600x600mm
Floor: Byron Apuano Matt300x600mm
Wall: Byron Apuano 75x600mmFloor: Byron Marquinia Matt and Apuano Matt 195x195mm
stocked
Marquinia Matt195x195mm
Marquinia Matt300x600mm
Marquinia Matt75x600mm
Marquinia Matt600x600mm
Floor: Byron Marquinia Matt 600x600mm
Floor: Byron Marquinia Chervon 75x590mm
special orderminimum order, lead times apply
Apuano Matt600x1195mm
Marquinia Matt600x1195mm
Apuano Chervon75x590mm
Marquinia Chervon75x590mm
Wall: Byron Apuano Matt 300x600mmFloor: Byron Intarsio C-York 300x300mm
stocked
Intarsio C-York300x300mm
Floor: Intarsio C-York300x300mm
Intarsio F-B/W300x300mm
Intarsio H-Tris300x300mm
Intarsio B-Light300x300mm
Intarsio E-3D300x300mm
Intarsio G-Mix300x300mm
Intarsio A-Dark300x300mm
Intarsio D-Check300x300mm
Floor: Intarsio E-3D300x300mm
special orderminimum order, lead times apply
tech specs
Standard Features Value Required Byron
ISO 10545/2 SIZELENGTH AND WIDTHTHICKNESSSTRAIGHTNESS OF EDGESWEDGINGFLATNESS
± 0.6% ± 2 mm± 5% ± 0.5 mm± 0.5% ± 2.0 mm± 0.5% ± 2.0 mm± 0.5% ± 2.0 mm
± 0.6% ± 2 mm± 0.5%± 1.5%± 0.2%± 0.2%
ISO 10545/3ASTM C373
WATER ABSORPTIONWATER ABSORPTION
< 0.5%< 0.5% (Impervious Tiles)
< 0.3%0.2% < 0.3%
ISO 10545/9ASTM C484
THERMAL SHOCK RESISTANCETHERMAL SHOCK RESISTANCE
no visible alterationunaffected
resistantunaffected
ISO 10545/12ASTM C1026
FROST/FREEZE RESISTANCEFROST/FREEZE RESISTANCE
no visible alterationunaffected
resistantunaffected
ISO 10545/13ASTM C650
CHEMICAL RESISTANCECHEMICAL RESISTANCE
no visible alteration A / LA / ≥ HB
ISO 10545/4 BREAKING STRENGTH ≥ 35 N/mm2 ≥ 40 N/mm2
ISO 10545/6 DEEP ABRASION RESISTANCE < 175 N/mm3 < 155 N/mm3
ISO 10545/14ASTM C1378
STAIN RESISTANCESTAIN RESISTANCE
≥ CLASS 3≥ CLASS 3
55
ANSI A137.1 AESTHETIC CLASSES V0-V4 V3