+ All Categories
Home > Documents > C. BUG ZAPPER - Telemarketing · The Bug Zapper has a collection grid that can be cleaned by...

C. BUG ZAPPER - Telemarketing · The Bug Zapper has a collection grid that can be cleaned by...

Date post: 11-Mar-2020
Category:
Upload: others
View: 4 times
Download: 0 times
Share this document with a friend
1
PARTS DIAGRAM: POWER ON: Plug the unit into a standard wall outlet at home or office. The Bug Zapper features an LED that provides light 24 hours a day with no bulbs to replace ever! See diagram A. A. WARNING: Disassembly of the electronic components within this unit may result in exposure to lead in the form or a solder , which is known to to state of California to cause cancer, birth defects and other reproductive harm. IMPORTANT: DO NOT GET THE UNIT OR PARTS WET WHILE IN USE. viatekproducts.com 888-7VIATEK 407.248.0123 viatekproducts.com 888-7VIATEK 407.248.0123 viatekproducts.com 888-7VIATEK 407.248.0123 1 2 3 The Bug Zapper has a collection grid that can be cleaned by removing the cover. The collection grid should be cleaned at least once a week. Be sure to unplug the unit before cleaning. Pull the cover from the front of the unit. With a damp sponge or cloth and wipe all sides of the grid. To remove buildup dip the cloth in some alcohol or dishwasher detergent an wipe clean. Make sure unit is completely dry before plugging back in. See diagram C. Important: Shake the entire unit back and forth several times to remove any unseen particles from the grid. MAINTENANCE: MAINTENANCE NOTE: The collection grid must be completely dry before placing cover back on the unit. When dry replace the cover by pushing it back on the unit, aligning the pegs with the holes on the front of the unit. Your Bug Zapper can now be enjoyed again! See diagram D. SAVE THESE INSTRUCTIONS WARNING To reduce the risk of fire, electric shock or injury when using any electric appliance precoautions shoulod be made, including but not limited to: • This unit is for INDOOR USE ONLY. • Always unplug prior to cleaning or performing any type of service. • To clean the exterior of the unit, use a mild solution and or dishwasher safe detergent with water. • If device appears to be damaged DO NOT USE. • Use device only as described in the instructions. • DO NOT operate the unit where there is flammable or combustible products or where other flamable vapors are present. Any attempt to open the unit will void the warranty. • NEVER handle the unit with wet hands. • DO NOT insert any objects in the unit. Keep unit free of hair, dirt, etc. FOR INDOOR USE ONLY Directions for Use plug in bug zapper model BZ01 BUG ZAPPER Cover Electro Grid Plug (back) Night light (behind cover) C. B.
Transcript
Page 1: C. BUG ZAPPER - Telemarketing · The Bug Zapper has a collection grid that can be cleaned by removing the cover. The collection grid should be cleaned at least once a week. Be sure

PARTS DIAGRAM:

POWER ON:Plug the unit into a standard wall outlet at home or office. The Bug Zapper features an LED that provides light 24 hours a day with no bulbs to replace ever! See diagram A.

A.

WARNING:Disassembly of the electronic components withinthis unit may result in exposure to lead in the formor a solder , which is known to to state of California tocause cancer, birth defects and other reproductive harm.

IMPORTANT:DO NOT GET THE UNIT OR PARTS WETWHILE IN USE.

viatekproducts.com 888-7VIATEK 407.248.0123

viatekproducts.com 888-7VIATEK 407.248.0123 viatekproducts.com 888-7VIATEK 407.248.01231 2

3

The Bug Zapper has a collection grid that can be cleaned by removing the cover. The collection grid should be cleaned at least once a week. Be sure to unplug the unit before cleaning. Pull the cover fromthe front of the unit. With a damp sponge or cloth and wipe all sides of the grid. To remove buildup dip the cloth in some alcohol or dishwasher detergent an wipe clean. Make sure unit is completely dry before plugging back in. See diagram C.

Important:Shake the entire unit back and forth several times to remove any unseen particles fromthe grid.

MAINTENANCE:

MAINTENANCE NOTE: The collection grid must be completely dry before placing cover back on the unit. When dry replace the cover by pushing it back on the unit, aligning the pegs with the holes on the front of the unit. Your Bug Zapper can now be enjoyed again! See diagram D.

SAVE THESE INSTRUCTIONS WARNING

To reduce the risk of fire, electric shock or injury when using any electric appliance precoautions shoulod be made, including but not limited to:

• This unit is for INDOOR USE ONLY.• Always unplug prior to cleaning or performing any type of service.• To clean the exterior of the unit, use a mild solution and or dishwasher safe detergent with water.• If device appears to be damaged DO NOT USE.• Use device only as described in the instructions.• DO NOT operate the unit where there is flammable or combustible products or where other flamable vapors are present.• Any attempt to open the unit will void the warranty.• NEVER handle the unit with wet hands.• DO NOT insert any objects in the unit. Keep unit free of hair, dirt, etc.

FOR INDOORUSE ONLY

Directions for Use

plug in bug zapper

model BZ01

BUG ZAPPER

Cover

Electro Grid

Plug (back)

Night light(behind cover)

C.

B.

Recommended