No Slide TitleThese are the alkali metals or Group 1
Elements.
H
Li
Na
K
Rb
Cs
Fr
Be
Sc
Ti
Mg
V
Cr
Mn
Fe
Co
Ni
Cu
Zn
Ga
Ge
Se
Br
Ca
Kr
Y
Zr
Nb
Mo
Tc
Ru
Pd
Ag
Cd
In
Sn
Sb
Sr
Te
Rh
Ba
Hf
Ta
W
Re
Os
Ir
Au
Hg
Tl
Pb
Bi
Po
La
At
Pt
Ra
Rf
Db
Sg
Bh
Hs
Mt
Electronic Structure
All the Group 1 elements have 1 electron in the outermost
shell.
Li
Na
K
Rb
Cs
Lithium
Sodium
Potassium
Rubidium
Caesium
2,8,1
2,8,8,1
2,1
© Boardworks Ltd 2003
Trends in Density
Lithium, sodium and potassium are all less dense than water and so
will float.
Densities follow a general, although not perfect, trend.
Element
Symbol
Density
Lithium
Li
0.53
Sodium
Na
0.97
Potassium
K
0.86
Rubidium
Rb
1.53
Caesium
Cs
1.88
Melting Points
The atoms in the Group 1 elements are bonded together using just
one outer shell electron per atom.
As a result, melting points are low compared to most metals.
Can you predict the missing data?
63
29
Element
Reactivity increases down the group.
Reactions all involve the loss of the outermost electron which
changes the metal atom into a metal 1+ ion.
Losing this electron seems to get easier as we go down the
group.
Reactivity Increases
Reactivity and Electron Structures
1. The outer electron (-) gets further from the nucleus (+) as you
go down the group. This reduces the force of attraction.
2. The inner shells ‘shield’ the outermost electron from the
attraction from the nucleus.
Both factors make it easier to lose the outer electron as you go
down the group.
Reactivity Increases
Hydrogen gas is produced which sometimes catches fire.
An alkali is left behind in the solution which is why these
elements are often called ‘The Alkali Metals’.
Reaction of Lithium
Lithium fizzes quickly in water forming lithium hydroxide and
hydrogen.
Lithium + water g Lithium hydroxide + hydrogen
2Li(s) + 2H2O(l) 2LiOH(aq) + H2(g)
© Boardworks Ltd 2003
Reaction of Sodium with Water
Sodium fizzes very quickly in water. The gas given off can be
ignited by a lighted splint.
Sodium + water g Sodium hydroxide + hydrogen
2Na(s) + 2H2O(l) 2NaOH(aq) + H2(g)
What will potassium do?
2KOH(aq) + H2(g)
What will the word equation and chemical equations be for the
reaction of potassium with water?
Potassium + water
Potassium + water
The Group 1 Metals and oxygen
The Group 1 elements burn in air to form metal oxides. Don’t try to
put them out with water!
4Li (s) + O2(g) 2 Li2O (s)
What will the word equation and chemical equations be for the
reaction of sodium with air?
Na(s) + O2 (g)
The Group 1 Metals and chlorine
The Group 1 elements burn in chlorine to form metal
chlorides.
2Li (s) + Cl2(g) 2 LiCl (s)
What will the word equation and chemical equations be for the
reaction of sodium with chlorine?
Na(s) + Cl2 (g)
Uses of the Group 1 Metals
The metals themselves are too reactive to have many uses although
sodium vapour gives street lights their yellow glow.
Lithium metal is used to improve the strength of aircraft alloys
and is also used in some electrical batteries.
Common sodium compounds include “salt”, (sodium chloride),
“bicarbonate” (sodium hydrogen carbonate), washing soda (sodium
carbonate) and caustic soda (sodium hydroxide.)
Potassium compounds are used in “NPK fertilisers”, in weedkillers,
explosives and many other chemicals.
sodium light
It needs to include:
The benefits of using sodium to transfer heat and the fact that
risks resulting from chemical reactivity are containable.
The chemical reactivity of sodium and the fact that if containment
did fail the whole power station could blow up.
Whether there are other safer metals that could be used in place of
sodium.
The activity
Following an accident at a nuclear power station three groups are
represented at a public meeting.
The debate centres around an accident involving a spill of molten
sodium metal which was being used to cool the reactor.
3 groups prepare presentations – see group description on the
following slides
Others students devise questions to follow the presentations.
© Boardworks Ltd 2003
The Incident
Most power stations burn a fossil fuel and use water to transfer
heat from the burners to the turbine area.
An alternative to water is sodium. Although solid it melts fairly
easily and is a better conductor of heat than water.
This has prompted its use as a coolant to absorb and transfer the
heat produced in nuclear power stations.
To Japan, a country with no fossil fuels, nuclear power is
particularly attractive. However, in 1996 Japan’s nuclear industry
suffered a setback when a split in a stainless steel pipe spewed 3
tonnes of molten sodium over the reactor floor.
Nuclear representatives say there was no radiation leak and
opponents to nuclear power were whipping up public concern.
Anti-nuclear protestors say that had it leaked underneath the floor
the entire nuclear station would have been at risk.
The government agreed to make plans about how to deal with a
nuclear accident just in case one did ever happen.
© Boardworks Ltd 2003
Nuclear Industry Representatives group
Make a case as to why Japan must have nuclear power.
Spell out the very low accident rate in the industry.
Explain why a liquid that can absorb heat better is a good thing
(safer?) for a nuclear reactor.
Spell out the fact that you understand the common reactions of
sodium and had already set in place systems to prevent these
reactions being a danger.
Make clear that there is no totally safe way of generating energy
and that use of fossil fuels also entails accidents and guaranteed
pollution.
© Boardworks Ltd 2003
Anti-Nuclear Protest group
Explain that risk assessment must take account both of the chances
of an accident and the impact of that accident. Leaked long lasting
radioactive material or even melt-down and nuclear explosion!
Challenge the use of sodium (rather than larger volumes of water)
as representing a needless risk.
Spell out in detail the possibility of explosive reactions
involving sodium and potentially devastating outcomes.
Other fuels are available even if they have to be imported.
© Boardworks Ltd 2003
Dr Ivan Idea Syndicate
One of the main reasons for using sodium is that it melts easily
and, as a metal, it conducts heat well.
Check out the melting point, reactivity and toxicity of other
metals and consider the feasibility of using them.
Are there particular risks you would need to guard against? Can you
suggest ways to minimise these?
Or - should you just go back to using water for heat
transfer?
© Boardworks Ltd 2003
Some data on the metals that melt below 500oC.
Sheet1
Metal
Symbol
1
2
4
7
alkali metals?
© Boardworks Ltd 2003
Which answer places the alkali metals in order of increasing
reactivity?
Na, Li, K,
K, Na, Li
Li, Na, K
Li, K, Na
© Boardworks Ltd 2003
we get:
-10oC B. 0oC C. 25oC D. 38oC
Chart1
Lithium
Sodium
Potassium
Rubidium
Caesium
Francium
Li
Na
K
Rb
Cs
Fr