Page 1
CA JCLCheck Workload Automation 12.0 1
CA RS 1404 Service ListCA JCLCheck Workload Automation 12.0 1
CA RS 1404 Service List
Release Service Description Hiper
12.0 RO62327 INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS
RO62328 INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS
RO64373 S0C4 IN JCLERR REXX TERMINATION PROCESSING
RO64788 S0C4 ABEND IN JCLGETM
RO64923 UNIX PATH SECURITY VALIDATION ERRORS
RO65273 MISSING MESSAGE CAY6079 WITH IDCAMS ALTER
RO65591 S0C4 ABEND PROCESSING IDCAMS DELETE
RO65784 RESOLVE PANEL SYMLIB NOT CHECKED FOR MEM
RO65935 BAD REPORT 8 IF STEPLIB IS TEMP
RO65944 CTM OPTION NOT RETAINED IN OPTIONS
RO65987 ABENDS0C1 WITH REMOTE VALIDATION
RO66227 INCORRECT CAY6421E SCHENV MESSAGE
RO66276 CAY6089E DATA SET IS NOT A PDS, AFTER CAY6081E
RO66582 REFERBACK TO UNCATALOGED DATASET NOT REPORTED
RO66666 JCLNEAT REMOVING () FROM GENERATION 0
RO66703 SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE
RO66754 BAD LINE NUMBERS DISPLAYED IN EDCHEK FOR ADRDSSU
RO66757 INCORRECT MESSAGE CAY6309E
RO66798 NO RELATIVE MESSAGE WHEN GDG NUMBER IS A ALPHA CHAR
RO67360 INVALID CAY6072E MESSAGE IDCAMS DELETE
RO67369 S0C4 IN CAZ2SYNM VALIDATING JCLCHECK STATEMENT
RO67385 CAIRIM FOR SUBCHEK NOT ENABLE FIRST TIME IT RAN
RO67584 IN-STREAM SYMBOL RESOLUTION ERROR Z/OS 2.1
RO67588 SET COMMANDS BEING PROCESSED AS PROC OVERRIDES
RO67607 S0C4 ABEND APCDOC ONLY CAZ2JINT
RO67652 JCLNEAT INCORRECT JCL FORMATTING
RO67687 IDCAMS KEYWORD FRLOG NOT RECOGNIZED - CAY6037
RO67707 SYSTEM SYMBOLS INCORRECTLY RESOLVED
RO67843 USER ADDED UTILITY USING $UPT VERB= FAILS
RO67949 NO MESSAGE FOR INVALID IEBCOPY SELECT STATEMENT
RO68026 UNIX PATH SECURITY VALIDATION
RO68027 UNIX PATH SECURITY VALIDATION
The CA RS 1404 service count for this release is 32
Page 2
CA JCLCheck Workload Automation 11.0 2
CA RS 1404 Service ListCA JCLCheck Workload Automation 11.0 2
CA RS 1404 Service List
Release Service Description Hiper
11.0 RO67791 SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE
The CA RS 1404 service count for this release is 1
Page 3
CA JCLCheck Workload Automation 3
CA RS 1404 Service List for CAZ1C00CA JCLCheck Workload Automation 3
CA RS 1404 Service List for CAZ1C00
FMID Service Description Hiper
CAZ1C00 RO62327 INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS
RO64923 UNIX PATH SECURITY VALIDATION ERRORS
RO65784 RESOLVE PANEL SYMLIB NOT CHECKED FOR MEM
RO65944 CTM OPTION NOT RETAINED IN OPTIONS
RO66666 JCLNEAT REMOVING () FROM GENERATION 0
RO67385 CAIRIM FOR SUBCHEK NOT ENABLE FIRST TIME IT RAN
RO67652 JCLNEAT INCORRECT JCL FORMATTING
RO68026 UNIX PATH SECURITY VALIDATION
The CA RS 1404 service count for this FMID is 8
Page 4
CA JCLCheck Workload Automation 4
CA RS 1404 Service List for CAZ2B00CA JCLCheck Workload Automation 4
CA RS 1404 Service List for CAZ2B00
FMID Service Description Hiper
CAZ2B00 RO67791 SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE
The CA RS 1404 service count for this FMID is 1
Page 5
CA JCLCheck Workload Automation 5
CA RS 1404 Service List for CAZ2C00CA JCLCheck Workload Automation 5
CA RS 1404 Service List for CAZ2C00
FMID Service Description Hiper
CAZ2C00 RO62328 INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS
RO64373 S0C4 IN JCLERR REXX TERMINATION PROCESSING
RO64788 S0C4 ABEND IN JCLGETM
RO65273 MISSING MESSAGE CAY6079 WITH IDCAMS ALTER
RO65591 S0C4 ABEND PROCESSING IDCAMS DELETE
RO65935 BAD REPORT 8 IF STEPLIB IS TEMP
RO65987 ABENDS0C1 WITH REMOTE VALIDATION
RO66227 INCORRECT CAY6421E SCHENV MESSAGE
RO66276 CAY6089E DATA SET IS NOT A PDS, AFTER CAY6081E
RO66582 REFERBACK TO UNCATALOGED DATASET NOT REPORTED
RO66703 SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE
RO66754 BAD LINE NUMBERS DISPLAYED IN EDCHEK FOR ADRDSSU
RO66757 INCORRECT MESSAGE CAY6309E
RO66798 NO RELATIVE MESSAGE WHEN GDG NUMBER IS A ALPHA CHAR
RO67360 INVALID CAY6072E MESSAGE IDCAMS DELETE
RO67369 S0C4 IN CAZ2SYNM VALIDATING JCLCHECK STATEMENT
RO67584 IN-STREAM SYMBOL RESOLUTION ERROR Z/OS 2.1
RO67588 SET COMMANDS BEING PROCESSED AS PROC OVERRIDES
RO67607 S0C4 ABEND APCDOC ONLY CAZ2JINT
RO67687 IDCAMS KEYWORD FRLOG NOT RECOGNIZED - CAY6037
RO67707 SYSTEM SYMBOLS INCORRECTLY RESOLVED
RO67843 USER ADDED UTILITY USING $UPT VERB= FAILS
RO67949 NO MESSAGE FOR INVALID IEBCOPY SELECT STATEMENT
RO68027 UNIX PATH SECURITY VALIDATION
The CA RS 1404 service count for this FMID is 24
Page 6
CA JCLCheck Workload Automation 12.0 6
CA RS 1404 - PTF RO62327 DetailsCA JCLCheck Workload Automation 12.0 6
CA RS 1404 - PTF RO62327 Details
Release Service Details12.0 RO62327 RO62327 M.C.S. ENTRIES = ++PTF (RO62327)
INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS
PROBLEM DESCRIPTION:
An invalid CAY6501 Message may be issued when NOSMS option is
used with a multi-volume dataset.
SYMPTOMS:
Invalid CAY6501 message
IMPACT:
JCL is not properly validated.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA JCLCheck R12.0
Star Problem(s):
JCLCHK 928
OBTAIN MUST SPECIFY EADSCB=OK
PROBLEM DESCRIPTION:
If the target of an OBTAIN macro may be an EAV (Extended Address
Volume), the EADSCB=OK parameter must be specified on the OBTAIN
macro. Otherwise, the OBTAIN macro may return with return code 24.
SYMPTOMS:
Whenever the OBTAIN macro is used against an EAV, the macro may
return with return code 24 and that particular function will
abort.
IMPACT:
Whenever the OBTAIN macro is used against an EAV, the macro may
return with return code 24 and that particular function will
abort.
CIRCUMVENTION:
When running JCLCheck against Extended Address Volumes, there is
no circumvention.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 933
Copyright (C) 2013 CA. All rights reserved. R00086-AJ6120-SP1
DESC(INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS) .
++VER (Z038)
FMID (CAZ1C00)
PRE ( RO56302 )
SUP ( RO54357 RO54859 RO54941 TR54357 TR54859 TR54941
TR62327 )
++IF FMID(CAZ2C00) REQ( RO62328) .
Page 7
CA JCLCheck Workload Automation 12.0 7
CA RS 1404 - PTF RO62328 DetailsCA JCLCheck Workload Automation 12.0 7
CA RS 1404 - PTF RO62328 Details
Release Service Details12.0 RO62328 RO62328 M.C.S. ENTRIES = ++PTF (RO62328)
INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS
PROBLEM DESCRIPTION:
An invalid CAY6501 Message may be issued when NOSMS option is
used with a multi-volume dataset.
SYMPTOMS:
Invalid CAY6501 message
IMPACT:
JCL is not properly validated.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA JCLCheck R12.0
Star Problem(s):
JCLCHK 928
OBTAIN MUST SPECIFY EADSCB=OK
PROBLEM DESCRIPTION:
If the target of an OBTAIN macro may be an EAV (Extended Address
Volume), the EADSCB=OK parameter must be specified on the OBTAIN
macro. Otherwise, the OBTAIN macro may return with return code 24.
SYMPTOMS:
Whenever the OBTAIN macro is used against an EAV, the macro may
return with return code 24 and that particular function will
abort.
IMPACT:
Whenever the OBTAIN macro is used against an EAV, the macro may
return with return code 24 and that particular function will
abort.
CIRCUMVENTION:
When running JCLCheck against Extended Address Volumes, there is
no circumvention.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 933
Copyright (C) 2013 CA. All rights reserved. R00086-AJ6120-SP1
DESC(INVALID CAY6501 MESSAGE WITH MULTI-VOL DATASET AND NOSMS) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO53749 RO55504 RO55854 RO56298 RO56652 RO57344 )
SUP ( TR61296 TR62328 TR64800 )
++IF FMID(CAZ1C00) REQ( RO62327) .
Page 8
CA JCLCheck Workload Automation 12.0 8
CA RS 1404 - PTF RO64373 DetailsCA JCLCheck Workload Automation 12.0 8
CA RS 1404 - PTF RO64373 Details
Release Service Details12.0 RO64373 RO64373 M.C.S. ENTRIES = ++PTF (RO64373)
S0C4 IN JCLERR REXX TERMINATION PROCESSING
PROBLEM DESCRIPTION:
An s0c4 abend may occur during REXX termination processing.
Control Blocks needed for message processing are not present.
SYMPTOMS:
S0C4 ABEND in JCLERR
IMPACT:
JCLCheck terminates abnormally.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 941
Copyright (C) 2014 CA. All rights reserved. R00095-AJ6120-SP1
DESC(S0C4 IN JCLERR REXX TERMINATION PROCESSING) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO60863 RO63259 )
SUP ( TR64373 )
Page 9
CA JCLCheck Workload Automation 12.0 9
CA RS 1404 - PTF RO64788 DetailsCA JCLCheck Workload Automation 12.0 9
CA RS 1404 - PTF RO64788 Details
Release Service Details12.0 RO64788 RO64788 M.C.S. ENTRIES = ++PTF (RO64788)
S0C4 ABEND IN JCLGETM
PROBLEM DESCRIPTION:
An S0C4 abend may occur in JCLGETM in entry
routine JCLPUTM attempting to free a specific
storage area.
SYMPTOMS:
S0C4 Abend in JCLCheck.
IMPACT:
JCLCheck terminates abnormally.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 943
Copyright (C) 2013 CA. All rights reserved. R00100-AJ6120-SP1
DESC(S0C4 ABEND IN JCLGETM) .
++VER (Z038)
FMID (CAZ2C00)
SUP ( AC60361 RO60370 TR59762 TR60370 TR64788 )
Page 10
CA JCLCheck Workload Automation 12.0 10
CA RS 1404 - PTF RO64923 DetailsCA JCLCheck Workload Automation 12.0 10
CA RS 1404 - PTF RO64923 Details
Release Service Details12.0 RO64923 RO64923 M.C.S. ENTRIES = ++PTF (RO64923)
UNIX PATH SECURITY VALIDATION ERRORS
PROBLEM DESCRIPTION:
When JCLCheck security checking is active, if the JCL contains a
UNIX PATH, JCLCheck displays security-related error (and warning)
messages. The particular error (and warning) messages depends on
the specific security product installed at the site.
SYMPTOMS:
JCLCheck displays security-related error (and warning) messages.
The particular error (and warning) messages depends on the
specific security product installed at the site.
IMPACT:
JCLCheck displays security-related error (and warning) messages
and continues to function.
CIRCUMVENTION:
Omit (or comment-out) the UNIX PATH statements or do not activate
JCLCheck security checking.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 946
Copyright (C) 2013 CA. All rights reserved. R00102-AJ6120-SP1
DESC(UNIX PATH SECURITY VALIDATION ERRORS) .
++VER (Z038)
FMID (CAZ1C00)
PRE ( RO56649 RO56743 RO60862 )
SUP ( TR64923 )
Page 11
CA JCLCheck Workload Automation 12.0 11
CA RS 1404 - PTF RO65273 DetailsCA JCLCheck Workload Automation 12.0 11
CA RS 1404 - PTF RO65273 Details
Release Service Details12.0 RO65273 RO65273 M.C.S. ENTRIES = ++PTF (RO65273)
MISSING MESSAGE CAY6079 WITH IDCAMS ALTER
PROBLEM DESCRIPTION:
Missing CAY6079 message for a non-existent PDS when checking
IDCAMS ALTER statements.
SYMPTOMS:
Missing CAY6079 message.
IMPACT:
JCL error may not be detected.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 945
Copyright (C) 2013 CA. All rights reserved. R00105-AJ6120-SP1
DESC(MISSING MESSAGE CAY6079 WITH IDCAMS ALTER) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO53749 RO55854 RO56298 RO56652 RO56744 RO57344
RO60863 RO61320 RO61710 RO63084 RO64463 RO64948 )
SUP ( TR65273 )
Page 12
CA JCLCheck Workload Automation 12.0 12
CA RS 1404 - PTF RO65591 DetailsCA JCLCheck Workload Automation 12.0 12
CA RS 1404 - PTF RO65591 Details
Release Service Details12.0 RO65591 RO65591 M.C.S. ENTRIES = ++PTF (RO65591)
S0C4 ABEND PROCESSING IDCAMS DELETE
PROBLEM DESCRIPTION:
---------------------------------------------------
It is possible to abend with an S0C4-11 while
processing an IDCAMS delete statement for a
Generation Data Group base dataset.
SYMPTOMS:
CA Jclcheck batch Jobs abend with S0C4.
IMPACT:
Termination of batch Jclcheck job.
CIRCUMVENTION:
Reduce the number of Jcl members processed or
run with Jclcheck option 'NOCSI'.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 949
Copyright (C) 2014 CA. All rights reserved. R00106-AJ6120-SP1
DESC(S0C4 ABEND PROCESSING IDCAMS DELETE) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO53749 RO55854 RO56298 RO56652 RO60863 RO61710 )
SUP ( TR65591 )
Page 13
CA JCLCheck Workload Automation 12.0 13
CA RS 1404 - PTF RO65784 DetailsCA JCLCheck Workload Automation 12.0 13
CA RS 1404 - PTF RO65784 Details
Release Service Details12.0 RO65784 RO65784 M.C.S. ENTRIES = ++PTF (RO65784)
RESOLVE PANEL SYMLIB NOT CHECKED FOR MEM
PROBLEM DESCRIPTION:
On the JCKSPF Resolve ISPF Panel for WA EE (ESP) the SYMLIB field
requires a sequential file to be specified or a PDS with the member
name included, ie. dsn(mem). This SYMLIB field is not checked for
validity before passing to ESP for processing. ESP does issue message
'ESP390E DATASET IPSNESP.CNTL.SYMLIB PARTITIONED BUT NO MEMBER
SPECIFIED' which is displayed by JCLCheck, but the field isn't
validated before the JCLCheck job is run.
SYMPTOMS:
'ESP390E DATASET IPSNESP.CNTL.SYMLIB PARTITIONED BUT NO MEMBER
SPECIFIED' message in REPORT 20 - RESOLUTION PRE-PROCESSOR report.
IMPACT:
A bad SYMLIB value is not detected until JCLCheck runs.
CIRCUMVENTION:
Use the Report 20 to detect the problem with SYMLIB.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 953
Copyright (C) 2014 CA. All rights reserved. R00108-AJ6120-SP1
DESC(RESOLVE PANEL SYMLIB NOT CHECKED FOR MEM) .
++VER (Z038)
FMID (CAZ1C00)
PRE ( RO54317 )
SUP ( TR65784 )
Page 14
CA JCLCheck Workload Automation 12.0 14
CA RS 1404 - PTF RO65935 DetailsCA JCLCheck Workload Automation 12.0 14
CA RS 1404 - PTF RO65935 Details
Release Service Details12.0 RO65935 RO65935 M.C.S. ENTRIES = ++PTF (RO65935)
BAD REPORT 8 IF STEPLIB IS TEMP
PROBLEM DESCRIPTION:
When a temporary dataset is used in a STEPLIB concatenation,
the dataset name displayed on the PXREF report (Report 8) is invalid.
SYMPTOMS:
REPORT 8 dataset name shows periods or other characters.
IMPACT:
Report 8 shows garbage in the dataset name, all other fields are
correct.
CIRCUMVENTION:
none.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 954
Copyright (C) 2014 CA. All rights reserved. R00110-AJ6120-SP1
DESC(BAD REPORT 8 IF STEPLIB IS TEMP) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO56298 RO56652 )
SUP ( TR65935 )
Page 15
CA JCLCheck Workload Automation 12.0 15
CA RS 1404 - PTF RO65944 DetailsCA JCLCheck Workload Automation 12.0 15
CA RS 1404 - PTF RO65944 Details
Release Service Details12.0 RO65944 RO65944 M.C.S. ENTRIES = ++PTF (RO65944)
CTM OPTION NOT RETAINED IN OPTIONS
PROBLEM DESCRIPTION:
In panel JCK0203 'CA JCLCheck ADDITIONAL PROCESSING OPTIONS' if CTM
is specified for the RESOLVE option, it will not be retained and
redisplayed the next time the panel is entered. This will prevent
use of the Resolve Panel for Control-M.
SYMPTOMS:
Resolve Panel (option 7) cannot be used by Control-M.
CTM option is not redisplayed in the panel after exit and re-enter.
IMPACT:
Control-M resolve panel cannot be accessed from JCKSPF.
CIRCUMVENTION:
Edit clist JCKMAIN and change 'CMT' to 'CTM' in the one line it occurs
in near line 285.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 955
Copyright (C) 2014 CA. All rights reserved. R00111-AJ6120-SP1
DESC(CTM OPTION NOT RETAINED IN OPTIONS) .
++VER (Z038)
FMID (CAZ1C00)
PRE ( RO56297 )
SUP ( TR65944 )
Page 16
CA JCLCheck Workload Automation 12.0 16
CA RS 1404 - PTF RO65987 DetailsCA JCLCheck Workload Automation 12.0 16
CA RS 1404 - PTF RO65987 Details
Release Service Details12.0 RO65987 RO65987 M.C.S. ENTRIES = ++PTF (RO65987)
ABENDS0C1 WITH REMOTE VALIDATION
PROBLEM DESCRIPTION:
Chekplex/GTS gets a S0C1 abend when requested from EDCHK (EJCK).
This may also occur in foreground in the CA JCLCheck ISPF panels.
SYMPTOMS:
Message 'LAST CC WAS 28' is displayed in the ISPF Editor.
S0C1 abend occurs in the GTS task.
IMPACT:
ChekPlex remote validation can't be done from EDCHK.
CIRCUMVENTION:
Run remote validation in batch.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 956
Copyright (C) 2013 CA. All rights reserved. R00113-AJ6120-SP1
DESC(ABENDS0C1 WITH REMOTE VALIDATION) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO63096 )
SUP ( TR60893 TR61808 TR65987 )
Page 17
CA JCLCheck Workload Automation 12.0 17
CA RS 1404 - PTF RO66227 DetailsCA JCLCheck Workload Automation 12.0 17
CA RS 1404 - PTF RO66227 Details
Release Service Details12.0 RO66227 RO66227 M.C.S. ENTRIES = ++PTF (RO66227)
INCORRECT CAY6421E SCHENV MESSAGE
PROBLEM DESCRIPTION:
When processing the DB2 RUN command, JCLCheck displays error message
CAY6421E when encountering the PARM parameter. This message is
being displayed incorrectly because it is related to the SCHENV JOB
card parameter.
SYMPTOMS:
The following message is displayed when processing the DB2 RUN
command PARM parameter:
CAY6421E SCHEDULING ENVIRONMENT 'parm data' DOES NOT EXIST -
REASON CODE '0426'
IMPACT:
After issuing the aforementioned error message, JCLCheck continues
to function normally.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 960
Copyright (C) 2014 CA. All rights reserved. R00117-AJ6120-SP1
DESC(INCORRECT CAY6421E SCHENV MESSAGE) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO55854 RO56298 RO60863 )
SUP ( TR66227 )
Page 18
CA JCLCheck Workload Automation 12.0 18
CA RS 1404 - PTF RO66276 DetailsCA JCLCheck Workload Automation 12.0 18
CA RS 1404 - PTF RO66276 Details
Release Service Details12.0 RO66276 RO66276 M.C.S. ENTRIES = ++PTF (RO66276)
CAY6089E DATA SET IS NOT A PDS, AFTER CAY6081E
PROBLEM DESCRIPTION:
Message CAY6089E may be displayed to incorrectly state that a dataset
is not a PDS or PDSE if the dataset was allocated previously in the
same job as DISP=NEW and the dataset already exists.
SYMPTOMS:
CAY6081E DISP OF CATLG INVALID FOR 'dsn' - DATA SET ALREADY CATALOGED
CAY6089E DATA SET 'dsn' IS NOT A PDS
IMPACT:
CAY6089E message in not correct, but correcting the cause of the
CAY6081E message will prevent the CAY6089E messages.
CIRCUMVENTION:
Correct the CAY6081E error and rerun.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 961
Copyright (C) 2014 CA. All rights reserved. R00118-AJ6120-SP1
DESC(CAY6089E DATA SET IS NOT A PDS, AFTER CAY6081E) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO56298 RO56652 )
SUP ( TR66276 )
Page 19
CA JCLCheck Workload Automation 12.0 19
CA RS 1404 - PTF RO66582 DetailsCA JCLCheck Workload Automation 12.0 19
CA RS 1404 - PTF RO66582 Details
Release Service Details12.0 RO66582 RO66582 M.C.S. ENTRIES = ++PTF (RO66582)
REFERBACK TO UNCATALOGED DATASET NOT REPORTED
PROBLEM DESCRIPTION:
If a DSN referback refers to a dataset that is uncataloged and is
specified with a vol=ser=, then while the original dataset can be found,
the referback to the uncataloged dataset cannot be found by the zOS
system and the job will fail with a JCL error - dataset not found.
CA JCLCheck does not detect this condition as an error.
SYMPTOMS:
CA JCLCheck does not detect the error. The JCL will fail when
submitted.
IMPACT:
Job contains error that will cause the job not to run that is not
detected.
CIRCUMVENTION:
none.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 963
Copyright (C) 2014 CA. All rights reserved. R00121-AJ6120-SP1
DESC(REFERBACK TO UNCATALOGED DATASET NOT REPORTED) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO53749 RO55854 RO56298 RO56652 RO57344 RO60863
RO61320 RO62328 RO63084 RO64463 RO64948 RO65273 )
SUP ( TR66582 )
++HOLD (RO66582) SYSTEM FMID(CAZ2C00)
REASON (DOC ) DATE (14017)
COMMENT (
+----------------------------------------------------------------------+
| CA JCLCheck Common Component Release 12.0 |
+----------------------------------------------------------------------+
***************************
* PUBLICATION *
***************************
This PTF adds a new message.
CAY6439E REFERBACK TO UNCATLG DSN NEEDS VOL=REF=, DSN NOT FOUND
Reason:
DSN referback points to a dataset that is referenced by VOLSER and
is not cataloged. The referback will not be able to find the file
unless a VOL parameter is added to the referback statement.
Action:
Add a VOL=REF= parameter referring to the same statement as the DSN
referback.
).
Page 20
CA JCLCheck Workload Automation 12.0 20
CA RS 1404 - PTF RO66666 DetailsCA JCLCheck Workload Automation 12.0 20
CA RS 1404 - PTF RO66666 Details
Release Service Details12.0 RO66666 RO66666 M.C.S. ENTRIES = ++PTF (RO66666)
JCLNEAT REMOVING () FROM GENERATION 0
PROBLEM DESCRIPTION:
JCLNeat invoked with the REXXMEM option is incorrectly reformatting
generation 0 dataset names without a plus (+) or minus (-) prefix
character.
SYMPTOMS:
JCLNeat invoked with the REXXMEM option is incorrectly reformatting
generation 0 dataset names without a plus (+) or minus (-) prefix
character. Dataset name 'SYSTEM.PLEX.OPERLOG.DAILY(0)' becomes
'SYSTEM.PLEX.OPERLOG.DAILY0'.
IMPACT:
Invalid JCL is produced.
CIRCUMVENTION:
If REXX reformatting is not required, remove the REXXMEM option.
PRODUCT(S) AFFECTED: JCLCHK Release 12.0
Star Problem(s):
JCLCHK 965
Copyright (C) 2014 CA. All rights reserved. R00123-AJ6120-SP1
DESC(JCLNEAT REMOVING () FROM GENERATION 0) .
++VER (Z038)
FMID (CAZ1C00)
PRE ( RO53748 RO55852 RO55971 RO56649 RO60862 )
SUP ( TR66666 )
Page 21
CA JCLCheck Workload Automation 12.0 21
CA RS 1404 - PTF RO66703 DetailsCA JCLCheck Workload Automation 12.0 21
CA RS 1404 - PTF RO66703 Details
Release Service Details12.0 RO66703 RO66703 M.C.S. ENTRIES = ++PTF (RO66703)
SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE
PROBLEM DESCRIPTION:
The SMPE reassembly of JCLSRBJ using macro JCLSRBJG requires the JES2
$MODULE macro that clients may not have if they are a JES3 only
enviroment. Applying a PTF that updates either of these two elements
can cause the apply to fail. Since release 11, the need to assemble
these at the installation is not longer required, since the code was
changed to dynamically determine the release info at runtime.
This PTF removes these elements.
SYMPTOMS:
PTF apply fails in a JES3 environment
IMPACT:
PTF cannot be applied
CIRCUMVENTION:
The PTF can be edited to remove the ++MAC (JCLSRBJG) and ++SRC (JCLSRBJ)
from the PTF. The PTF will then apply. Contact CA support for
assistance.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 967
Copyright (C) 2014 CA. All rights reserved. R00125-AJ6120-SP1
DESC(SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO60863 RO63259 )
SUP ( TR66703 )
Page 22
CA JCLCheck Workload Automation 12.0 22
CA RS 1404 - PTF RO66754 DetailsCA JCLCheck Workload Automation 12.0 22
CA RS 1404 - PTF RO66754 Details
Release Service Details12.0 RO66754 RO66754 M.C.S. ENTRIES = ++PTF (RO66754)
BAD LINE NUMBERS DISPLAYED IN EDCHEK FOR ADRDSSU
PROBLEM DESCRIPTION:
In ISPF Edit when using the EJCK or !JCK commands to check the JCL, if
the job contains ADRDSSU control cards the addrdssu statements will
appear at wrong place in the member proceeded by a string containing
an L, ie. ' L ' and the messages will not appear by the original
ADRDSSU statements in the member.
SYMPTOMS:
ADRDSSU statements listed in ==MSG> lines with ' L ', or L with
other characters, displayed before the statements.
IMPACT:
All errors are reported, but the display looks bad.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 968
Copyright (C) 2014 CA. All rights reserved. R00127-AJ6120-SP1
DESC(BAD LINE NUMBERS DISPLAYED IN EDCHEK FOR ADRDSSU) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO54309 RO63096 )
SUP ( AR63096 RO60676 RO64169 TR60676 TR63155 TR64169
TR66754 )
Page 23
CA JCLCheck Workload Automation 12.0 23
CA RS 1404 - PTF RO66757 DetailsCA JCLCheck Workload Automation 12.0 23
CA RS 1404 - PTF RO66757 Details
Release Service Details12.0 RO66757 RO66757 M.C.S. ENTRIES = ++PTF (RO66757)
INCORRECT MESSAGE CAY6309E
PROBLEM DESCRIPTION:
Periodically, when a UNIT=AFF parameter points to a DD which represents
a pre-existing data set, error message CAY6309E is displayed. This is
incorrect.
SYMPTOMS:
When the problem occurs, error message CAY6309E is displayed and
JCLCheck continues processing the JCL.
IMPACT:
When the problem occurs, error message CAY6309E is displayed and
JCLCheck continues processing the JCL.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 969
Copyright (C) 2014 CA. All rights reserved. R00128-AJ6120-SP1
DESC(INCORRECT MESSAGE CAY6309E) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO56652 RO61320 )
SUP ( TR66757 )
Page 24
CA JCLCheck Workload Automation 12.0 24
CA RS 1404 - PTF RO66798 DetailsCA JCLCheck Workload Automation 12.0 24
CA RS 1404 - PTF RO66798 Details
Release Service Details12.0 RO66798 RO66798 M.C.S. ENTRIES = ++PTF (RO66798)
NO RELATIVE MESSAGE WHEN GDG NUMBER IS A ALPHA CHAR
PROBLEM DESCRIPTION:
When a JCL DD statement is coded for a gdg dataset
and the generation data group number is not numeric,
no relative error message is displayed from CA JCLCheck.
SYMPTOMS:
CA Jclcheck batch Jobs terminate with a condition code 8,
with messages : CAY6099W, CAY6089E
IMPACT:
The Jclcheck batch job terminates with condition code 8.
NO relative error message for the alpha character GDG number.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 971
Copyright (C) 2014 CA. All rights reserved. R00129-AJ6120-SP1
DESC(NO RELATIVE MESSAGE WHEN GDG NUMBER IS A ALPHA CHAR) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO53749 RO55982 RO56298 RO56652 RO57344 RO60863
RO61320 RO63084 RO64463 RO64948 RO65273 RO66582 )
SUP ( TR55123 TR66798 )
++HOLD (RO66798) SYSTEM FMID(CAZ2C00)
REASON (DOC ) DATE (14045)
COMMENT (
+----------------------------------------------------------------------+
| CA JCLCheck Common Component Release 12.0 |
+----------------------------------------------------------------------+
***************************
* PUBLICATION *
***************************
THIS FIX ADD A NEW MESSAGE THAT IS ISSUED WHEN A GENERATION
Data Group dataset GDG number is not numeric.
After reviewing the new messages below, you may apply this
fix by adding the BYPASS(HOLDSYS(DOC)) phrase to the APPLY
command.
CAY6671E DATA SET 'dsn name(#)' GDG NUMBER NOT NUMERIC
Reason:
CA JCLCheck detected that a generation data group
dataset GDG number was not numeric.
Action:
Enter a valid generation data group number
then rerun JCLCheck Batch job.
).
Page 25
CA JCLCheck Workload Automation 12.0 25
CA RS 1404 - PTF RO67360 DetailsCA JCLCheck Workload Automation 12.0 25
CA RS 1404 - PTF RO67360 Details
Release Service Details12.0 RO67360 RO67360 M.C.S. ENTRIES = ++PTF (RO67360)
INVALID CAY6072E MESSAGE IDCAMS DELETE
PROBLEM DESCRIPTION:
When processing an IDCAMS delete statement for a PDS
dataset with a member name and FILE DD keyword,
message CAY6072E displays incorrectly.
SYMPTOMS:
CA Jclcheck batch Jobs terminate with a condition code 8,
with messages : CAY6072E.
IMPACT:
The Jclcheck batch job terminates with condition code 8.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 980
Copyright (C) 2014 CA. All rights reserved. R00135-AJ6120-SP1
DESC(INVALID CAY6072E MESSAGE IDCAMS DELETE) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO56298 RO56652 RO57344 RO62328 )
SUP ( TR67360 )
Page 26
CA JCLCheck Workload Automation 12.0 26
CA RS 1404 - PTF RO67369 DetailsCA JCLCheck Workload Automation 12.0 26
CA RS 1404 - PTF RO67369 Details
Release Service Details12.0 RO67369 RO67369 M.C.S. ENTRIES = ++PTF (RO67369)
S0C4 IN CAZ2SYNM VALIDATING JCLCHECK STATEMENT
PROBLEM DESCRIPTION:
An S0C4 abend may occur in JCLCheck when validating JCLCheck
statements.
SYMPTOMS:
S0C4 Abend in CAZ2SYNM.
IMPACT:
JCLCheck terminates abnormally, statements are not validated.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 972
Copyright (C) 2014 CA. All rights reserved. R00136-AJ6120-SP1
DESC(S0C4 IN CAZ2SYNM VALIDATING JCLCHECK STATEMENT) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO56298 RO60863 RO61710 RO64463 RO65273 RO67240 )
SUP ( TR66834 TR67369 )
Page 27
CA JCLCheck Workload Automation 12.0 27
CA RS 1404 - PTF RO67385 DetailsCA JCLCheck Workload Automation 12.0 27
CA RS 1404 - PTF RO67385 Details
Release Service Details12.0 RO67385 RO67385 M.C.S. ENTRIES = ++PTF (RO67385)
CAIRIM FOR SUBCHEK NOT ENABLE FIRST TIME IT RAN
PROBLEM DESCRIPTION:
---------------------------------------------------
CA JCLCheck option SUBCHEK is not enabled on the
first execution of CAIRIM. Jobs submitted from a
TSO edit session are not validated by CA JCLCheck.
However if CAIRIM SUBCHEK option is done twice, the
SUBCHEK option is enabled.
SYMPTOMS:
CA JCLCheck does not validate JCL statements before the
job is submitted.
IMPACT:
Jobs with JCL errors get submitted.
CIRCUMVENTION:
Run CAIRIM for SUBCHEK option twice.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 979
Copyright (C) 2014 CA. All rights reserved. R00137-AJ6120-SP1
DESC(CAIRIM FOR SUBCHEK NOT ENABLE FIRST TIME IT RAN) .
++VER (Z038)
FMID (CAZ1C00)
SUP ( TR67385 )
Page 28
CA JCLCheck Workload Automation 12.0 28
CA RS 1404 - PTF RO67584 DetailsCA JCLCheck Workload Automation 12.0 28
CA RS 1404 - PTF RO67584 Details
Release Service Details12.0 RO67584 RO67584 M.C.S. ENTRIES = ++PTF (RO67584)
IN-STREAM SYMBOL RESOLUTION ERROR Z/OS 2.1
PROBLEM DESCRIPTION:
In-stream symbol resolution is being done incorrectly in some cases which
causes utility control statements to be parsed improperly.
SYMPTOMS:
Use of symbols in utility control statements may be parsed erroneously
and reported incorrectly as errors.
IMPACT:
Valid utility control statements flagged incorrectly.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA JCLCheck WA Release 12.0
Star Problem(s):
JCLCHK 983
Copyright (C) 2014 CA. All rights reserved. R00142-AJ6120-SP1
DESC(IN-STREAM SYMBOL RESOLUTION ERROR Z/OS 2.1) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO56298 RO56652 RO64463 RO66503 RO67240 RO67580 )
SUP ( TR67555 TR67584 )
Page 29
CA JCLCheck Workload Automation 12.0 29
CA RS 1404 - PTF RO67588 DetailsCA JCLCheck Workload Automation 12.0 29
CA RS 1404 - PTF RO67588 Details
Release Service Details12.0 RO67588 RO67588 M.C.S. ENTRIES = ++PTF (RO67588)
SET COMMANDS BEING PROCESSED AS PROC OVERRIDES
PROBLEM DESCRIPTION:
When SET statements follow an EXEC for a procedure, the SET statements
are processed with the overrides for the PROC. Depending on the
usage of the set variables in the PROC and the number of steps in the
PROC, JCLCheck could change the values of the variables used in the
PROC resulting in incorrect values being substituted.
SYMPTOMS:
Proceedure variables change in the middle of the PROC expansion.
IMPACT:
JCL is resolve incorrectly. Datasets that use the varibles may be
referenced incorrectly.
CIRCUMVENTION:
none.
PRODUCT(S) AFFECTED:
CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 970
CAY6020E WITH PARM USING SYMBOLIC QUOTES
PROBLEM DESCRIPTION:
When an EXEC parm uses symbolics to specify the quotes for the PARM,
the ending symbolic may not resolve when the PARM exceeds one line.
SYMPTOMS:
No 'SUBSTITUTION JCL -' appears for continuation line and message
CAY6020E EXPECTED CONTINUATION NOT RECEIVED
with a error severity of 8 is displayed for the EXEC statement.
IMPACT:
CAY6020E message is invalidly issued for a valid JCL statement.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 977
Copyright (C) 2014 CA. All rights reserved. R00143-AJ6120-SP1
DESC(SET COMMANDS BEING PROCESSED AS PROC OVERRIDES) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO53749 RO55854 RO56298 RO56652 RO57344 RO60863
RO61320 RO61710 RO62328 RO64463 RO64948 RO65035
RO66503 RO67240 RO67369 RO67580 )
SUP ( RO66227 RO66757 RO67275 TR66227 TR66706 TR66757
TR67141 TR67275 TR67434 TR67588 )
Page 30
CA JCLCheck Workload Automation 12.0 30
CA RS 1404 - PTF RO67607 DetailsCA JCLCheck Workload Automation 12.0 30
CA RS 1404 - PTF RO67607 Details
Release Service Details12.0 RO67607 RO67607 M.C.S. ENTRIES = ++PTF (RO67607)
S0C4 ABEND APCDOC ONLY CAZ2JINT
PROBLEM DESCRIPTION:
An S0C4 Abend may occur in JCLCheck when called by APCDOC.
SYMPTOMS:
S0C4 Abend in CAZ2JINT.
IMPACT:
Reports are not produced, job terminates abnormally.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED:
CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 984
Copyright (C) 2014 CA. All rights reserved. R00144-AJ6120-SP1
DESC(S0C4 ABEND APCDOC ONLY CAZ2JINT) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO56298 RO57344 )
SUP ( RO53758 RO54020 TR53010 TR53758 TR54020 TR67607 )
Page 31
CA JCLCheck Workload Automation 12.0 31
CA RS 1404 - PTF RO67652 DetailsCA JCLCheck Workload Automation 12.0 31
CA RS 1404 - PTF RO67652 Details
Release Service Details12.0 RO67652 RO67652 M.C.S. ENTRIES = ++PTF (RO67652)
JCLNEAT INCORRECT JCL FORMATTING
PROBLEM DESCRIPTION:
JCLNeat invoked with the REXXMEM option is truncating the data specified
in the COND keyword on EXEC statements.
SYMPTOMS:
JCLNeat invoked with the REXXMEM option is truncating the data specified
in the COND keyword on EXEC statements. This statement:
//JS0015 EXEC PGM=IDCAMS,COND=(0,EQ,JS0010)
Is reformatted as:
//JS0015 EXEC PGM=IDCAMS,COND=(0,EQ,JS0
IMPACT:
Invalid JCL is produced.
CIRCUMVENTION:
If REXX reformatting is not required, remove the REXXMEM option.
PRODUCT(S) AFFECTED: CA JCLCheck WA Release 12.0
Star Problem(s):
JCLCHK 985
Copyright (C) 2014 CA. All rights reserved. R00145-AJ6120-SP1
DESC(JCLNEAT INCORRECT JCL FORMATTING) .
++VER (Z038)
FMID (CAZ1C00)
PRE ( RO53748 RO55852 RO55971 RO56649 RO60862 )
SUP ( RO66666 TR66666 TR67652 )
Page 32
CA JCLCheck Workload Automation 12.0 32
CA RS 1404 - PTF RO67687 DetailsCA JCLCheck Workload Automation 12.0 32
CA RS 1404 - PTF RO67687 Details
Release Service Details12.0 RO67687 RO67687 M.C.S. ENTRIES = ++PTF (RO67687)
IDCAMS KEYWORD FRLOG NOT RECOGNIZED - CAY6037
PROBLEM DESCRIPTION:
The IDCAMS keyword FRLOG is not recognized by CA JCLCheck and is
flagged as an error.
SYMPTOMS:
CAY6037E UNKNOWN KEYWORD "FRLOG" SPECIFIED IN
OPERAND OF "CLUSTER"
IMPACT:
IDCAMS keywords do not pass verification.
CIRCUMVENTION:
Run without CTLSCAN. Specify NOCTL option.
PRODUCT(S) AFFECTED:
CA JCLCheck Release 11.0
CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 978
Copyright (C) 2014 CA. All rights reserved. R00146-AJ6120-SP1
DESC(IDCAMS KEYWORD FRLOG NOT RECOGNIZED - CAY6037) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO55854 RO56298 RO60863 RO61320 RO61710 RO67240 )
SUP ( RO66178 RO66179 TR66178 TR66179 TR67687 )
Page 33
CA JCLCheck Workload Automation 12.0 33
CA RS 1404 - PTF RO67707 DetailsCA JCLCheck Workload Automation 12.0 33
CA RS 1404 - PTF RO67707 Details
Release Service Details12.0 RO67707 RO67707 M.C.S. ENTRIES = ++PTF (RO67707)
SYSTEM SYMBOLS INCORRECTLY RESOLVED
PROBLEM DESCRIPTION:
JCLCheck incorrectly resolving single character system symbols as null.
SYMPTOMS:
JCLCheck incorrectly resolving single character system symbols as null.
System symbol &SYSALVL. is set to '2' and resolved by JCLCheck as ''.
IMPACT:
Statements using the affected symbol(s) will be improperly processed and
incorrectly flagged or passed.
CIRCUMVENTION:
None.
PRODUCT(S) AFFECTED: CA JCLCheck WA Release 12.0
Star Problem(s):
JCLCHK 986
Copyright (C) 2014 CA. All rights reserved. R00148-AJ6120-SP1
DESC(SYSTEM SYMBOLS INCORRECTLY RESOLVED) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO56298 )
SUP ( TR67707 )
Page 34
CA JCLCheck Workload Automation 12.0 34
CA RS 1404 - PTF RO67843 DetailsCA JCLCheck Workload Automation 12.0 34
CA RS 1404 - PTF RO67843 Details
Release Service Details12.0 RO67843 RO67843 M.C.S. ENTRIES = ++PTF (RO67843)
USER ADDED UTILITY USING $UPT VERB= FAILS
PROBLEM DESCRIPTION:
When customizing the JCLUPT table and using the $UPT VERB= option, the
user provided utility checks may fail with a bad message such as
CAY6006S VERB "M DV " IS UNKNOWN".
SYMPTOMS:
CAY6006S VERB "M DV " IS UNKNOWN".
IMPACT:
Client provided utlity checks that use the VERB= option on the $UPT
macro will not pass validation.
CIRCUMVENTION:
Run checks without customized JCLUPT. Client utilites defined in
customized table will not be checked.
PRODUCT(S) AFFECTED:
CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 987
Copyright (C) 2014 CA. All rights reserved. R00149-AJ6120-SP1
DESC(USER ADDED UTILITY USING $UPT VERB= FAILS) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO53749 RO54309 RO55504 RO55854 RO56298 RO56652
RO57344 RO60863 RO61710 RO62328 RO63096 RO63259
RO64463 RO64948 RO65273 RO66485 RO66503 RO67240
RO67369 RO67580 )
SUP ( AR63096 RO54516 RO60676 RO64169 RO64373 RO64519
RO65591 RO66754 RO67584 TR54516 TR60676 TR62458
TR63155 TR63919 TR64169 TR64373 TR64519 TR65591
TR66677 TR66754 TR67555 TR67584 TR67705 TR67843 )
Page 35
CA JCLCheck Workload Automation 12.0 35
CA RS 1404 - PTF RO67949 DetailsCA JCLCheck Workload Automation 12.0 35
CA RS 1404 - PTF RO67949 Details
Release Service Details12.0 RO67949 RO67949 M.C.S. ENTRIES = ++PTF (RO67949)
NO MESSAGE FOR INVALID IEBCOPY SELECT STATEMENT
PROBLEM DESCRIPTION:
When processing an IEBCOPY select statement for a
single member name enclosed in multiple parentheses,
no error message is displayed.
SYMPTOMS:
CA Jclcheck batch Jobs terminate with a condition code 0
IMPACT:
when job is submitted to the internal reader, the job ends with a
CONTROL STATEMENT ERROR.
CIRCUMVENTION:
None
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 988
Copyright (C) 2014 CA. All rights reserved. R00150-AJ6120-SP1
DESC(NO MESSAGE FOR INVALID IEBCOPY SELECT STATEMENT) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO53749 RO55854 RO56298 RO56652 RO57344 RO60863
RO61320 RO61710 RO63084 RO64463 RO64948 RO65273
RO66582 RO66798 RO67843 )
SUP ( RO65591 TR65591 TR67705 TR67949 )
++HOLD (RO67949) SYSTEM FMID(CAZ2C00)
REASON (DOC ) DATE (14085)
COMMENT (
+----------------------------------------------------------------------+
| CA JCLCheck Common Component Release 12.0 |
+----------------------------------------------------------------------+
***************************
* PUBLICATION *
***************************
. This fix add a new message that is issued when a invalid
. IEBCOPY select statement is detected by CA JCLCheck.
. After reviewing the new messages below, you may apply this
. fix by adding the BYPASS(HOLDSYS(DOC)) phrase to the APPLY
. command.
. CAY6610 SELECT STATEMENT HAS INVALID FORMAT
. Reason:
. CA JCLCheck detected that a iebcopy select statement
. with a single member name was enclosed in multiple
. parentheses.
. Action:
. Correct select statement and rerun batch job.
).
Page 36
CA JCLCheck Workload Automation 12.0 36
CA RS 1404 - PTF RO68026 DetailsCA JCLCheck Workload Automation 12.0 36
CA RS 1404 - PTF RO68026 Details
Release Service Details12.0 RO68026 RO68026 M.C.S. ENTRIES = ++PTF (RO68026)
UNIX PATH SECURITY VALIDATION
PROBLEM DESCRIPTION:
This enhancement provides security validation for UNIX PATHs.
It is based on the PATHMODE and PATHOPTS parameters and various
callable services.
SYMPTOMS:
This is not a problem. This is an enhancement.
IMPACT:
This is not a problem. This is an enhancement.
CIRCUMVENTION:
Do not use the SECURITY(UNIXPATH) JCLCheck sub-option.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 973
Copyright (C) 2014 CA. All rights reserved. R00152-AJ6120-SP1
DESC(UNIX PATH SECURITY VALIDATION) .
++VER (Z038)
FMID (CAZ1C00)
PRE ( RO56649 RO56743 RO60862 )
SUP ( RO64923 TR64923 TR68026 )
++IF FMID(CAZ2C00) REQ( RO68027) .
++HOLD (RO68026) SYSTEM FMID(CAZ1C00)
REASON (DOC ) DATE (14085)
COMMENT (
+----------------------------------------------------------------------+
| CA JCLCheck Release 12.0 |
+----------------------------------------------------------------------+
***************************
* PUBLICATION *
***************************
In order to activate this feature, you should specify SEC(PATH) as
one of the JCLCheck options.
).
Page 37
CA JCLCheck Workload Automation 12.0 37
CA RS 1404 - PTF RO68027 DetailsCA JCLCheck Workload Automation 12.0 37
CA RS 1404 - PTF RO68027 Details
Release Service Details12.0 RO68027 RO68027 M.C.S. ENTRIES = ++PTF (RO68027)
UNIX PATH SECURITY VALIDATION
PROBLEM DESCRIPTION:
This enhancement provides security validation for UNIX PATHs.
It is based on the PATHMODE and PATHOPTS parameters and various
callable services.
SYMPTOMS:
This is not a problem. This is an enhancement.
IMPACT:
This is not a problem. This is an enhancement.
CIRCUMVENTION:
Do not use the SECURITY(UNIXPATH) JCLCheck sub-option.
PRODUCT(S) AFFECTED: CA JCLCheck Release 12.0
Star Problem(s):
JCLCHK 973
Copyright (C) 2014 CA. All rights reserved. R00152-AJ6120-SP1
DESC(UNIX PATH SECURITY VALIDATION) .
++VER (Z038)
FMID (CAZ2C00)
PRE ( RO53749 RO55504 RO55854 RO56298 RO56652 RO57344
RO60863 RO61320 RO62328 RO63084 RO64463 RO64948
RO65273 RO66798 RO67843 RO67949 )
SUP ( RO66582 TR66582 TR68027 )
++IF FMID(CAZ1C00) REQ( RO68026) .
++HOLD (RO68027) SYSTEM FMID(CAZ2C00)
REASON (DOC ) DATE (14085)
COMMENT (
+----------------------------------------------------------------------+
| CA JCLCheck Common Component Release 12.0 |
+----------------------------------------------------------------------+
***************************
* PUBLICATION *
***************************
In order to activate this feature, you should specify SEC(PATH) as
one of the JCLCheck options.
).
Page 38
CA JCLCheck Workload Automation 11.0 38
CA RS 1404 - PTF RO67791 DetailsCA JCLCheck Workload Automation 11.0 38
CA RS 1404 - PTF RO67791 Details
Release Service Details11.0 RO67791 RO67791 M.C.S. ENTRIES = ++PTF (RO67791)
DESC (SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE)
/*-------------------------------------------------------------------
PRODUCT: CA-JCLCHECK-MVS Common Component
RELEASE: 11.0
DATE: 21 FEB 2014
HYPER: NO
STARTRAK PROBLEM PRODUCT NAME: CM-Z2 PROBLEM NUMBER: 967
---------------------------------------------------------------------
SOURCE RE-ASM FAILS IN JES3, MISSING $MODULE
---------------------------------------------------------------------
The SMPE reassembly of JCLSRBJ using macro JCLSRBJG requires the JES2
$MODULE macro that clients may not have if they are a JES3 only
enviroment. Applying a PTF that updates either of these two elements
can cause the apply to fail. Since release 11, the need to assemble
these at the installation is not longer required, since the code was
changed to dynamically determine the release info at runtime.
This PTF removes these elements.
SYMPTOMS:
PTF apply fails in a JES3 environment
IMPACT:
PTF cannot be applied
CIRCUMVENTION:
The PTF can be edited to remove the ++MAC (JCLSRBJG) and ++SRC (JCLSR
from the PTF. The PTF will then apply. Contact CA support for
assistance.
---------------------------------------------------------------------
PROBLEM RESOLUTION:
Apply the following PTF to the system.
Reload any resident modules, or re-IPL if necessary.
***NOTE*** Retain the printed output for reference.
-------------------------------------------------------------------*/.
++VER (Z038) FMID(CAZ2B00)
PRE (RO64130)
SUP (T4N1261).
