Cable Support Systems - · PDF filee2000 RibbEd CHannEl MAX loAd (kg) 0 250 500750 1500 3000...

Cable Support Systems

www.ezystrut.com.au

AustrAliA’s leAdingrAnge of cAble And pipe support systems.

orderquiCk

guide

Cable Support Systems 3

queensland

25 Machinery StreetDarraQueensland, 4076Tel: 07 3259 6844Fax: 07 3259 6855email: [email protected]

South Australia — Head office

580 Prospect RoadKilburnSouth Australia, 5084Tel: 08 8360 4550Fax: 08 8360 4590email: [email protected]

New South Wales

Lot 304 Progress CircuitPrestonsNew South Wales, 2170Tel: 02 8783 7555Fax: 02 8783 7666email: [email protected]

Victoria

25 Marwen DriveDerrimutVictoria, 3030Tel: 03 8368 7555Fax: 03 8368 7599email: [email protected]

Western Australia

12 Vale StreetMalagaWestern Australia, 6090Tel: 08 9249 7966Fax: 08 9249 7855email: [email protected]

Perth

Adelaide

Melbourne

Sydney

Brisbane

disclaimerThe information provided in this catalogue is correct at the time of publication, however, EzyStrut reserves the right to change specifications of products at any time without notice.

CopyrightNo part of this catalogue may be reproduced in any part without the express permission of EzyStrut.

CoNTACTiNg uS

Cable Support Systems Cable Support Systems4 5

!iNTroduCTioN To

ezySTruT CoNTeNTS

CHANNel/STruT SloTTed CHANNel CoMBiNATioN CHANNel

FiTTiNgS& FASTeNerS

CANTileVer BrACkeTS

CT PerForATedCABle TrAy

ezyMeSHCABle MeSH

eT/eT3/eT5CABle TrAy CABle duCT

CABle TrACk STeel CABle lAdder AluMiNiuM CABle lAdder

FrP CABle lAdder& CHANNel/STruT

Welcome to the EzyStrut Quick Order Guide. This book is designed to help you find the essential product information you need quickly and easily. If you need more comprehensive product information, EzyStrut also offers extended Cable Support and Pipe Support Systems catalogues available from our branches or your nearest wholesaler.

Cable and Pipe Supports are the backbone of construction, mining, and infrastructure projects. If you need cable or pipe management, EzyStrut Australia prides itself on in house engineering, high quality products, the best lead times, and the best value.

We offer cable support products in tray, ladder, mesh, and track systems, and pipe support clamps and hangers for use with general plumbing, HVAC, Mining, or Fire Protection. EzyStrut also offers custom engineered cable and pipe management solutions with a diverse range of machinery and an on site galvanising facility located in South Australia.

HoT TiPS

6-7 8-9 10-11

12-17 18-19 20

21-23 24-27 28

29 30-35 36-41

48-51

CABle ClAMPS

44-47

did you kNoW that you can learn how to work with strut, cable and pipe supports with online videos by EzyStrut?

Head to www.ezystrut.com.au and click the Media Centre, or scan these QR Codes with your smartphone.

WorkiNg WiTH

41MMSTruT

WORKING WITH

41MMSTRUT

PuTTiNg A 90° BeNd iN

CABle TrAy

PUTTING A 90° BEND IN

CABLE TRAY

CABle lAdder

&FiTTiNgS

CABLE LADDER

&FITTINGS

CoVerS

42-43

SeleCTiNg THe

CorreCTFiNiSH

SELECTING THE

CORRECTFINISH


CHANNel/STruT CHANNel/STruT

e1000 CHannEl

MAX loAd (kg)0 1500750250 500 3000

2184361308 654 109SPAN (mm)

41.3

41.3

22.2 7.0

Mill Steel Pre-Galvanised SteelHot Dip Galvanised SteelStainless SteelFibre Reinforced Plastic*

HeAVy duTy

e2000 RibbEd CHannEl

MAX loAd (kg)0 1500750250 500 3000

157314945 471 78SPAN (mm)

41.3

41.3

22.2 7.0

e3300 CHannEl

MAX loAd (kg)0 1500750250 500 3000

73147442 221 37SPAN (mm)

41.3

21.622.2 7.0

e4000 RibbEd CHannEl

MAX loAd (kg)0 1500750250 500 3000

58116350 175 30SPAN (mm)

41.3

21.622.2 7.0

e5500 CHannEl

MAX loAd (kg)0 1500750250 500 3000

4148302488 1244 207SPAN (mm)

41.3

61.9

22.2 7.0

M g H S FrP

Available Finishes:

• Supplied in 6m lengths• 41x41mm• 2.5mm THK

Mill Steel Pre-Galvanised SteelHot Dip Galvanised SteelAluminium

MediuM duTy

M g H A

Available Finishes:


Mill Steel Pre-Galvanised SteelHot Dip Galvanised SteelStainless Steel

MediuM duTy

M g H S

Available Finishes:



ligHT duTy

M g H A

Available Finishes:


Mill Steel Pre-Galvanised SteelHot Dip Galvanised Steel

Very HeAVy duTy

M g H

Available Finishes:


Example

*See page 49 for more information on FRP Channel/Strut

MGHSaFRP

Mill SteelPre-GalvanisedHot Dip GalvanisedStainless SteelAluminiumFibre Reinforced Plastic

e1000 HSelect Channel Select FinishE1000E2000E3300E4000E5500

41x41mm/2.5mm THK41x41mm/1.6mm THK, Ribbed41x21mm/2.5mm THK41x21mm/1.6mm THK, Ribbed41x61mm/2.5mm THK

HoW To order CHANNel


SloTTed CHANNel SloTTed CHANNel

e1000S SlottEd CHannEl


HeAVy duTy

e2000S SlottEd RibbEd CHannEl

41.3

41.322.2

7.0


e4000S SlottEd RibbEd CHannEl


M g H S

Available Finishes:



MediuM duTy

M g H A

Available Finishes:



MediuM duTy

M g H S

Available Finishes:



Very HeAVy duTy

M g H

Available Finishes:


ligHT duTy

M g H A

Available Finishes:


41.3

41.322.2

7.0

41.3

21.622.2

7.0

41.3

21.622.2

7.0

41.3

61.9

22.2

7.0

25x14mm slots are punched continuously at 38mm centres





14.0

14.0

14.0

14.0

14.0


Example e1000S H

E1000SE2000SE3300SE4000SE5500S

41x41mm/2.5mm THK, Slotted41x41mm/1.6mm THK, Slotted, Ribbed41x21mm/2.5mm THK, Slotted41x21mm/1.6mm THK, Slotted, Ribbed41x61mm/2.5mm THK, Slotted

HoW To order SloTTed CHANNel

MGHSa

Mill SteelPre-GalvanisedHot Dip GalvanisedStainless SteelAluminium

Select Slotted Channel Select Finish


e1001 CoMbination CHannEl


HeAVy duTy

e2001 CoMbination RibbEd CHannEl



M g H S

Available Finishes:



MediuM duTy

M g H A

Available Finishes:



MediuM duTy

M g H S

Available Finishes:



Very HeAVy duTy

M g H

Available Finishes:



ligHT duTy

M g H A

Available Finishes:


The Channel is continuously spot welded at a maximum of 150mm centres





CoMBiNATioN CHANNel CoMBiNATioN CHANNel

41.3

123.8

7.0

22.2

41.3

43.2

7.0

22.2

41.3

43.2

7.0

22.2

41.3

82.6

7.0

22.2

41.3

82.6

7.0

22.2

Example e1001 H

E1001E2001E3301E4001E5501

41x82.6mm/2.5mm THK, Combination41x82.6mm/1.6mm THK, Combination, Ribbed41x43.2mm/2.5mm THK, Combination41x43.2mm/1.6mm THK, Combination, Ribbed41x123.8mm/2.5mm THK, Combination

HoW To order CoMBiNATioN CHANNel

MGHSa

Mill SteelPre-GalvanisedHot Dip GalvanisedStainless SteelAluminium

Select Combination Channel Select Finish

e4001 CoMbination RibbEd CHannEl

*Other Made To Order Strut Combinations are available upon request


FiTTiNgS& FASTeNerS

FiTTiNgS& FASTeNerS

Example

HSZ

Hot Dip GalvanisedStainless SteelZinc Plated

e1271 HSelect Fitting Select Finish

HoW To order FiTTiNgS

Beam Clamps & Channel rollers

e1062-e1964Flat PlatE FittinG

e1065Flat PlatE FittinG



e1271bEaM ClaMP

e1272bEaM ClaMP

e1386bEaM ClaMP

e1796bEaM ClaMP

e2785bEaM ClaMP

e2786bEaM ClaMP

e2675 (M10)bEaM ClaMP

e3087bEaM ClaMP

80

52 40

4055

45

89

5252

25

12

load M10 rod

e2676 (M12)bEaM ClaMP

25

12

load M12 rod

100

ePC10 (M10)bEaM ClaMP

eBC10 (M10)bEaM ClaMP

e2749CHannEl RollER

e2750CHannEl RollER

Channel Fittings

50

ePC12 (M12)bEaM ClaMP

5444

eBC12 (M12)bEaM ClaMP

54

! *Not all finishes available on all Fittings. Contact your local EzyStrut office for more information.

For more information about EzyStrut Fittings, including Beam Clamps, Channel Rollers, Channel Fittings, Joiners and Hangers, ask your local EzyStrut office for a comprehensive Cable or Pipe Support Catalogue or visit EzyStrut online at www.ezystrut.com.au.

Ø A

orderingCode

E1062E1063E1064E1964

A

M8M10M12M16

90 186136




13192

234 90

138



90

138

9090

e1026anGlE FittinG

e1068anGlE FittinG

51

48

57

41

Working Load when used in pairs: 506kg






Working Load: 590kg

Working Load: 660kg

Slip Load: 398kg

Working Load: 102kg

Working Load: 108kg

Working Load: 150kg

Working Load: 250kg

Working Load: 22kg

Working Load: 44kg

Unless otherwise noted, the standard hole diameter on EzyStrut Flat Plate and Angle Fittings is 14mm.

Ø7 Ø7

M10 M12

M10 M12 M10

M12

Check out http://www.ezystrut.com.au/about-us/using-channels-and-accessories/ for a handy demonstration for working with Channels and Accessories.


137137

FiTTiNgS& FASTeNerS

FiTTiNgS& FASTeNerS

e1326anGlE FittinG

e1458anGlE FittinG

e1325anGlE FittinG

e2484anGlE FittinG

e1037anGlE FittinG

e1038anGlE FittinG

e1033anGlE FittinG

e1357anGlE FittinG

e1359anGlE FittinG

e4045anGlE FittinG

e1045anGlE FittinG

e1347anGlE FittinG

e4047anGlE FittinG

e1047anGlE FittinG

e5547anGlE FittinG

e2224‘U’ FittinG

105

41

57

89

89

105

102

102

5190

41 51

90

41

135

51

57

90

90

105

88

21

88

41

41

88

137

98

47






e2072baSE PlatE

e2072AbaSE PlatE

e2073baSE PlatE

98

41137

98

41

137

90 184

85

42

40

150150

89

150150

40

e1186anGlE FittinG

e2815adJ. anGlE FittinG

e2815dadJ. anGlE FittinG

e1546anGlE FittinG

e2452anGlE FittinG

e2855 (M10)HanGER

e2539HanGER

eHMP10 (M10)HanGER w/l: 540kg

eHMP12 (M12)HanGER w/l: 610kg

63

45°

150

89

100

89

53

45°346

346

83

40

44

42

Hangers

eCMP10 (M10)HanGER w/l: 327kg

eCMP12 (M12)HanGER w/l: 480kg

eVMP10 (M10)HanGER w/l: 410kg

eVMP12 (M12)HanGER w/l: 590kg

100100

100 100

100

lPdM10 (M10)liPPEd dRoP in anCHoR

lPdM12 (M12)liPPEd dRoP in anCHoR

Channel Joiners

e922lCHannEl JoinER

e922TCHannEl JoinER

e422JCHannEl JoinER

e922J-iNTint. CHannEl JoinER

e922J-eXTExt. CHannEl JoinER

e922XCHannEl JoinER

185

14.5

34

185

34.8

39

185

46.2

40

160 160

40

226225136225

40

150150

100

The standard hole diameter on EzyStrut Channel Joiners is 7mm.

M10 M12 M10 M12

M10 M10 M12

M10 M12


FiTTiNgS& FASTeNerS

FiTTiNgS& FASTeNerS

zinc Plated

length(mm)

Hot dipgalvanised

StainlessSteel

M6

Thread Size

M8

M10

M12

HS620ZHS625ZHS630ZHS640ZHS820ZHS825ZHS830ZHS840ZHS1020ZHS1025ZHS1030ZHS1040ZHS1225ZHS1230ZHS1240ZHS1250Z

20253040202530402025304025304050

HS620H - - -HS820HHS825HHS830HHS840HHS1020HHS1025HHS1030HHS1040HHS1225HHS1230HHS1240HHS1250H

HS620SHS625SHS630SHS640SHS820SHS825SHS830SHS840SHS1020SHS1025SHS1030SHS1040SHS1225SHS1230SHS1240SHS1250S

PS616ZPS620ZPS625ZPS825Z

16202525

-PS620H - -

- - - -

M6

M8

zinc Plated

length(mm)

Hot dipgalvanised

Thread Size

1620252025

CS616ZCS620ZCS625ZCS820ZCS825Z

- - - - -

- - - - -

M6

M8

SW6ZSW8ZSW10ZSW12ZSW16Z

M6M8M10M12M16

SW6HSW8HSW10HSW12H -

SW6SSW8SSW10SSW12S -

HeX SCreWS

PAN HeAd SCreWS

CouNTerSuNk SeT SCreWS

SPriNg WASHerS

StainlessSteel

Thread Size

zinc Plated

Hot dipgalvanised

StainlessSteel

zinc Plated

length(mm)

Hot dipgalvanised

Thread Size

StainlessSteel

FlAT WASHerS

Thread Size

zinc Plated

Hot dipgalvanised

StainlessSteel

M6M8M10M12M16

HeX NuTS

Thread Size

zinc Plated

Hot dipgalvanised

StainlessSteel

FW6ZFW8ZFW10ZFW12ZFW16Z

FW6HFW8HFW10HFW12H -

FW6SFW8SFW10SFW12S -

HN6ZHN8ZHN10ZHN12ZHN16Z

HN6HHN8HHN10HHN12H -

HN6SHN8SHN10SHN12S -

THreAded rod

Thread Size

zinc Plated

Hot dipgalvanised

StainlessSteel

M6M8M10M12M16

M6M8M10M12M16

TR6ZTR8ZTR10ZTR12ZTR16Z

-TR8HTR10HTR12H -

- -TR10STR12S -

Mud guArd WASHerS

Thread Size

zinc Plated

Hot dipgalvanised

StainlessSteel

M6M8M10M12

MW6ZMW8ZMW10ZMW12Z

MW6H -MW10H -

- - - -

SPliCe BolTS & NuTS

Hot Dip Galvanised.

Specify ETFKH when both parts are required. ETFKH supplied in packs of 40.

CHANNel NuT, loNg SPriNg

CHANNel NuT, SHorT SPriNg

CHANNel NuT, No SPriNg

Thread Size

zinc Plated

Hot dipgalvanised

StainlessSteel

M6M8M10M12

E1006ZE1007ZE1008ZE1010Z

E1006HE1007HE1008HE1010H

E1006SE1007SE1008SE1010S

Suits all 41mm high channel

Thread Size

zinc Plated

Hot dipgalvanised

StainlessSteel

M6M8M10M12

E4006ZE4007ZE4008ZE4010Z

E4006HE4007HE4008HE4010H

- - - -

Suits all 21mm high channel

Thread Size

zinc Plated

Hot dipgalvanised

StainlessSteel

M6M8M10M12

E3006ZE3007ZE3008ZE3010Z

E3006HE3007HE3008HE3010H

- - - -

Suits all channel

Supplied in 3m lengths

Wedge NuTS

Thread Size

zinc Plated

M6M8M10

EWGNM6EWGNM8ENGNM10 M6 E3016Z E3016H E3016S

e3016 CHANNel NuT, No SPriNg

Suits all channel

SBH & CNH SB & SN

Both items are ordered separately.EzyStrut Splice Bolts have a smooth head to eliminate the risk of sheathing the cable during installation. Purpose made Counterbore Nuts ensure that full tension is achieved during installation.

Available as Hot Dip Galvanised or Stainless Steel.


CANTileVer BrACkeTS CANTileVer BrACkeTS

CB4 CantilEvER bRaCkEt



e1075 CantilEvER bRaCkEtS

150

60

40

40

96137L

50

189 230

L

50

119160

L

52626217513110588

150300450600750900

CB2-150CB2-300CB2-450CB2-600CB2-750CB2-900

orderingCode

length - l(mm)

Working load (kg)*

1000350345294150

300450600750900

CB4-300CB4-450CB4-600CB4-750CB4-900

orderingCode

length - l(mm)

Working load (kg)*

1349770527400330275270195

165300450600750900915

1000

CB254-165CB254-300CB254-450CB254-600CB254-750CB254-900CB254-915

CB254-1000

orderingCode

length - l(mm)

Working load (kg)*206

150

60

40

HoW To order CANTileVer BrACkeTS

Example

HSaFRP

Hot Dip GalvanisedStainless SteelAluminiumFibre Reinforced Plastic

CB2 150 HSelect Finish

Cb2Cb4Cb254tb

CB2 Cantilever BracketCB4 Cantilever BracketCB254 Cantilever BracketE4000SG Trapeze Bracket

Select Cantilever Bracket1501653004506007509009151000

Select length (mm)Available Lengths/Details

Available Lengths/Details


HoT diP gAlVANiSed oNly

Use Ordering Code:e1075-4H

HoT diP gAlVANiSed oNly

Use Ordering Code:e1075-8H

TB E4000SG tRaPEZE bRaCkEt

266342418570722

150225300450600

TB150TB225TB300TB450TB600

orderingCode

Suits TrayWidth (mm)

length - l(mm)


79

111519

Number of Slots

524350262175131

Workingload (kg)

120

L

*Working Loads for Steel Cantilever Brackets shown




ezyMeSHCABle MeSH

eM EZYMESH CablE MESH

3.0m2.5m2.0m1.5m

27kg39kg

61kg

47

109kgSPA

N

loAd Per MeTre

600

58

450300

150

CT PerForATedCABle TrAy

CT CablE tRaY

600450

300

150

20

CTirintERnal RiSER

CTCCRoSS

CTTtEE

CTBbEnd

CTerExtERnal RiSER

75

225

eMSSidE JoinER

eMBCMESH CUttER

eMHdHold down Unit

eMSBbolt JoinER

eMWBwall MoUnt bRaCkEt

eMSCbottoM JoinER

eMTtRaPEZE

eMCCantilEvER

*All CT Cable Tray Fittings are made to 150mm radius

100

Example

GHSa

Pre-GalvanisedHot Dip GalvanisedStainless SteelAluminium

CT 150 gSelect Finish

CtCtbCttCtCCtiRCtER

Cable TrayCable Tray BendCable Tray TeeCable Tray CrossCable Tray Internal RiserCable Tray External Riser

HoW To order CT TrAy ANd FiTTiNgS

Select CT Tray/Fitting75100150225300450600

Select Width (mm)

Example

GHSZ

Pre-GalvanisedHot Dip GalvanisedStainless SteelZinc Plated

eM 300 z

EMEMHdEMSEMSbEMwbEMSCEMtEMCEMbC

EzyMesh Cable MeshEzyMesh Hold Down UnitEzyMesh Side JoinerEzyMesh Bolt JoinerEzyMesh Wall Mount BracketEzyMesh Bottom JoinerEzyMesh TrapezeEzyMesh CantileverEzyMesh Cutters

HoW To order ezyMeSH

!Specify Width for Mesh, Trapezes, or Cantilevers only. ignore this step for all other compo-nents. EG, to order an EzyMesh Side Joiner in Zinc, use part code EMSZ.

Select FinishSelect Mesh/Component Select Width (mm)

150300450500600

500

Supplied in 2.4m lengths Supplied in 3m lengths

See overleaf for assembly instructions for EzyMesh.


ezyMeSHASSeMBly iNSTruCTioNS

ezyMeSHASSeMBly iNSTruCTioNS

8Need help? Visit us online for detailed EzyMesh Assembly Instructions for individual mesh sizes, or call one of our friendly Customer Service Officers.

BendCut and remove mesh, and attach Bolt Joiners.

internal risersCut and remove mesh, and bend to desired radius.

Wall JoinerSecure your EzyMesh to a wall.

41mm Channel/Strut Hold down unitEasily attach your EzyMesh to 41mm Channel.

Tee/Cross JoinCut and remove mesh, and attach Bolt Joiners.

Join Two lengthsUse Side Joiners and Bottom Joiners as required to join multiple lengths.

external risersCut and remove mesh, and bend to desired radius.


eT3 CablE tRaY

eT5 CablE tRaY

3.0m2.5m2.0m1.5m

29kg40kg

62kg116kgSP

AN

loAd Per MeTre

SPA

N

loAd Per MeTre3.0m2.5m2.0m1.5m

60kg82kg

128kg227kg

78

600

85

450300

150

40

600

47

450300

150

eT EZYtRaY CablE tRaY

40

600

45

450300

150

eT CABle TrAyeT CABle TrAy

dS dividER StRiP S SPliCE TX tEE/CRoSSbRaCkEt

rl RiSER link Hd Hold down rP RadiUS PlatE

HoW To order eT CABle TrAy

HoW To order eT CABle TrAy ACCeSSorieS

See overleaf for assembly instructions for ET Cable Tray.

Example

GH

Pre-GalvanisedHot Dip Galvanised

eT 300 gSelect Finish

EtEt3Et5

ET EzyTray Cable TrayET3 Cable TrayET5 Cable Tray

Select eT Tray Select Width (mm)

Example

GH


eT3 S gSelect Finish

EtEt3Et5

ET EzyTray Cable TrayET3 Cable TrayET5 Cable Tray

Select eT Tray Select AccessorydSStxRlHdRP

Divider StripSpliceTee/Cross BracketRiser LinkHold Down UnitRadius Plate

150300450600




Contact EzyStrut for Load Capability information


BeNd

Hold doWN

SPliCe

iNTerNAl riSer

eXTerNAl riSer

Tee/CroSS

eT CABle TrAy ASSeMBly iNSTruCTioNS

eT CABle TrAy ASSeMBly iNSTruCTioNS


dCo CliP on lid CablE dUCt

dSl SCREw on lid CablE dUCt

eTk EZYtRak

eTkd EZYtRak dUal

CABle TrACkCABle duCT

5075

100150

5075

100150

5075

100150

5075

100150

Supplied with screws for lid

50

3.0m2.5m2.0m1.5m

77kg112kg

164kg292kgSP

AN

loAd Per MeTre

50

3.0m2.5m2.0m1.5m

149kg186kg

298kg496kgSP

AN

loAd Per MeTre

600450

300150

900

Example

GH


dCo 100 100 gSelect Finish

dCodSldCbdCtdCC

Clip on Lid DuctScrew on Lid DuctDuct 90° Bend/RiserDuct TeeDuct Cross

HoW To order CABle duCT

Select duct Select Width (mm) Select Height (mm)

HoW To order CABle TrACk

Example

GH


eTk 450 300 gSelect Finish

EtkEtkd

Cable Track Single Spline Cable Track Double Spline

Select Cable Track150300450600900

Select Width (mm)

5075100150

5075100150

Supplied in 2.4m lengths




150300

Select rung Spacing (mm)

*EzyStrut can Make To Order any Height to Width Combination for Cable Duct

600450

300

900

Rung Spacing

Rung Spacing

(ETK Only)


STeelCABle lAdder

STeelCABle lAdder

N1 nEMa 1 CablE laddER

N2 nEMa 2 CablE laddER N20C nEMa 20C CablE laddER


SPA

N

loAd Per MeTre3.0m2.5m2.0m1.5m

112kg160kg

233kg248kg

SPA

N

loAd Per MeTre6.0m5.5m5.0m4.5m4.0m

60kg72kg

89kg113kg

50kg

43 65

SPA

N


127kg134kg

165kg209kg

111kg

9375

130115

Also available as a reverse rail System



SPA

N


177kg215kg

265kg256kg

149kg

600450

300150

135 150

900

600450

300150

900

600450

300150

900

600450

300150

900

N2 nEMa 2 aS3013:2005 FiRE RatEd CablE laddER

4593

123.8

600450

300150

50KgPer m

HoW To order STeel CABle lAdder

Example

HS

Hot Dip GalvanisedStainless Steel

N3 l 300 HSelect Finish

n1n2n3n20C

Nema 1Nema 2Nema 3Nema 20C

Select ladder SizellFR

Specify ladder Select Width (mm)

LadderFire Rated Ladder(Nema 2 Only)

150300450600900

Available in 3m or 6m lengths3m lengths standard





Meets Nema 12A loading requirements


Meets Nema 20B loading requirements

Meets Nema 20C loading requirements

*See overleaf

Rl Riser Ladder*(Nema 1 Only)

Achieves AS3013:2005 2 Hour fire Rating at 1050°C

Supplied with trapeze kit and pre-welded splice plates


STeelCABle lAdder

STeelCABle lAdder

B bEnd

W

R

er ExtERnal RiSERW

R

T tEEir intERnal RiSER

C CRoSS

W

R

R

WR

Sr StRaiGHt REdUCER

lHr lEFt Hand REdUCER rHr RiGHt Hand REdUCER

W2

W1

W2

W1

W2

W1

*Custom fittings are available upon request. Contact your nearest EzyStrut branch for more information.Nema 2 Fittings shown for illustration purposes.

HoW To order STeel CABle lAdder FiTTiNgS

— Bends, internal/external risers, Tees & Crosses

Example

HS


N2 B 600 4 SSelect Finish

n1n2n3n20C


Select ladder SizebERiRtC

Specify Fitting150300450600900

Select Width (mm)

BendExt. RiserInt. RiserTeeCross

346

Select radius (mm)

300450600

— Straight & left Hand/right Hand reducers

Example

HS


N2 rHr 600 300 HSelect Finish

n1n2n3n20C


Select ladder SizeSRlHRRHR


Select Width 1 (mm)

St. ReducerLh. ReducerRh. Reducer

Select Width 2 (mm)

150300450600

W

N1rl nEMa 1 RiSER CablE laddER

43 65

600450

300150

900Tabs pre welded during manufacture to allow vertical installation. Available in 3m or 6m lengths3m lengths standard


26


STeelCABle lAdder

STeelCABle lAdder

Hdu Hold down UnitS

CC CovER ClaMPS

CS CovER StRaPS

dS dividER StRiPS

Supplied as a Cover Strap and J Bolt Kit.

Specify ladder size and width when ordering.

Suitable for Nema 2 and Nema 3 steel ladder only.

Nuts supplied.

Nema 1N1Hdu [H/S]

Nema 2N2Hdu [H/S]

Nema 3N3Hdu [H/S]

Nema 20CN20CHdu [H/S]

Nema 1N1CC [H/S]

S SPliCE

VS vERtiCal SPliCE

HS HoRiZontal SPliCE

SHB HanGinG SPliCE bRaCkEt (nEMa 1 PRodUCt onlY)

Use in pairs Nema 2 shown

Example

Example

Example

ExampleNema 1N1S [H/S]

Nema 2N2S [H/S]

Nema 3N3S [H/S]

Nema 20CN20CS [H/S]

2 x HS820Hex Screws supplied per Splice Plate.

4 x SB Splice Bolts and SN Splice Nuts required per Splice Plate.




Use in pairs

Requires M10 Threaded Rod.










Strap

J Bolt

2 x HS620 Hex Screws and e3016 Channel Nuts required for installation.

Standard Length: 3m Standard Finish: Pre-galvanised


Nema 2N2CC [H/S]

Nema 3N3CC [H/S]

Nema 20CN20CCC [H/S]

Nema 2N2CS [H/S]

Nema 3N3CS [H/S]

Nema 1N1dS [H/S]

Nema 2N2dS [H/S]

Nema 3N3dS [H/S]

Nema 20CN20CdS [H/S]

Nema 1N1VS [H/S]

Nema 2N2VS [H/S]

Nema 3N3VS [H/S]

Nema 20CN20CVS [H/S]

Nema 1N1HS [H/S]

Nema 2N2HS [H/S]

Nema 3N3HS [H/S]

Nema 20CN20CHS [H/S]

Nema 1N1SHB [H/S]

EaRtH StRaPS

35mm2 Type or 70mm2 Type

p Ga va s d s Steel

Th ead Leng

Availa

or p

S – tain es


AluMiNiuMCABle lAdder




N20C nEMa 20C CablE laddER

N3 nEMa 3 CablE laddERSP

AN


60kg72kg

89kg113kg

50kg

90

SPA

N


88kg106kg

131kg167kg

74kg

100

12097

SPA

N


178kg215kg

266kg336kg

150kg

600450

300150

900

600450

300150

900

600450

300150

900

600450

300150

900 155132

79

SPA

N


84kg114kg

164kg256kg

64kg

69

HoW To order AluMiNiuM CABle lAdder

Example

a Aluminium

N1 l 900 AApply Finish

n1n2n3n20C


Select ladder SizelSpecify ladder Select Width (mm)

Ladder 150300450600900





155132Also available as a C-rail System




Meets Nema 20C loading requirements

12097 Also available as a C-rail System




B bEnd er ExtERnal RiSER


C CRoSS Sr StRaiGHt REdUCER


W

R

W

R

WR

WR

W

R

W2

W1

W2

W1

W2

W1

HoW To order AluMiNiuM CABle lAdder FiTTiNgS


Example

a Aluminium

N3 C 300 3 AApply Finish

n1n2n3n20C


Select ladder SizebERiRtC


Select Width (mm)


346

Select radius (mm)

300450600


Example

a Aluminium

N3 lHr 900 300 AApply Finish

n1n2n3n20C


Select ladder SizeSRlHRRHR


Select Width 1 (mm)


Select Width 2 (mm)

150300450600

*Custom fittings are available upon request. Contact your nearest EzyStrut branch for more information.Nema 2 Fittings shown for illustration purposes.


NHdB Hold down bRaCkEt

CC CovER ClaMPS

dS dividER StRiPS

S SPliCE

VS vERtiCal SPliCE



Example

Example

Example











2 x HS620 Hex Screws and e3016 Channel Nuts required for installation.

Standard Length: 3m Standard Finish: Aluminium



AlHdg Hold down GUidE

Supplied complete with hold down plate, spring nut and screw.

Bolt diameter: M10





Nema 1N1CC [A]

Nema 2N2CC [A]

Nema 3N3CC [A]

Nema 20CN20CCC [A]

Nema 1N1dS [A]

Nema 2N2dS [A]

Nema 3N3dS [A]

Nema 20CN20CdS [A]

Nema 1, 2, 3, 20CAlHdg [A]

Nema 1, 2, 3, 20CNHdB [A]

Nema 1N1S [A]

Nema 2N2S [A]

Nema 3N3S [A]

Nema 20CN20CS [A]

Nema 1N1VS [A]

Nema 2N2VS [A]

Nema 3N3VS [A]

Nema 20CN20CVS [A]

Nema 1N1HS [A]

Nema 2N2HS [A]

Nema 3N3HS [A]

Nema 20CN20CHS [A]

EaRtH StRaPS

35mm2 Type or 70mm2 Type

*interface Spacers (iS) are supplied separately and should be used when the aluminium is in contact with dissimilar metals.

Allows Thermal Expansion of the cable support system. Supplied complete with hold down plate, spring nut and screw.

Bolt diameter: M10iS


CABle TrAyANd lAdder CoVerS

CABle TrAyANd lAdder CoVerS

CP PEakEd CovER

CPV PEakEd and vEntEd CovER

CF Flat CovERHoW To order CABle TrAy or lAdder CoVerS

— Cable Tray Covers

Example

GHSa

CP CT 300 gSelect Finish

CFCPCPv

Flat CoverPeaked CoverPeaked and Vented Cover

Select Cover Type150300450600

Select Tray Width (mm)


— Cable ladder Covers

CtCtEtEt

Select Tray TypeCT Cable TrayET Cable TrayET3 Cable TrayET5 Cable Tray

Example CF N1 450 H

Select FinishCFCPCPv


Select Cover Type150300450600900

Select ladder Width (mm)

n1n2n3n20C

Select ladder TypeNema 1 LadderNema 2 LadderNema 3 LadderNema 20C Ladder

— Cable ladder Fitting Covers

CPV N1B4503 HExample

*FRP Cable Ladders use Stainless Steel Covers*Use CT Cable Tray Cover ordering codes for Reverse Rail Cable Ladder

CFCPCPv


Select Cover TypeAppend Cable ladder Fitting ordering Code

GHSa


Select FinishGHSa






CABle ClAMPSCABle ClAMPS

eTF tRiFoil CablE ClaMP

202224273031333741424591

ETF20ETF22ETF24ETF27ETF30ETF31ETF33ETF37ETF41ETF42ETF45ETF91

orderingCode

Cabledia. (mm)

ek CablE ClaMP

1419253238445157647076

EK2026-1EK2028-1EK2030-1EK2032-1EK2034-1EK2036-1EK2038-1EK2040-1EK2042-1EK2044-1EK2046-1

orderingCode

Cabledia. (mm)

eqF QUadFoil CablE ClaMP

202224273031333741424591

EQF20EQF22EQF24EQF27EQF30EQF31EQF33EQF37EQF41EQF42EQF45EQF91

orderingCode

Cabledia. (mm)

e5 CablE ClaMP

E5-8 E5-11 E5-14 E5-17 E5-19 E5-21 E5-25 E5-27 E5-29 E5-32 E5-34 E5-38 E5-43 E5-48 E5-51 E5-54 E5-57 E5-60 E5-64 E5-67 E5-70 E5-73 E5-76 E5-79 E5-83

orderingCode dia. (mm) Similar

orderingCode

E5-86 E5-89 E5-92 E5-95 E5-98 E5-102 E5-105 E5-108 E5-111 E5-114 E5-117 E5-121 E5-127 E5-133E5-140E5-146 E5-152 E5-160 E5-165 E5-171 E5-178 E5-191 E5-203 E5-216E5-230

86 89 92 95 98 102 105 108 111 114 117 121 127 133140146 152 160 165 171 178 191 203 216 230

204920502051205220532054205520562057205820592060206220642066206820702070-622070-642070-662070-702070-742070-802070-842070-230

8 11 14 17 19 21 25 27 29 32 34 38 43 48 51 54 57 60 64 67 70 73 76 79 83

2024202520262027202820292030-20312032203320342035203720382039204020412042204320442045204620472048

dia. (mm) Similar

e2600 iSolation StRiP

HoW To order CABle ClAMPS

Example

HSZ

Hot Dip GalvanisedStainless SteelZinc Plated Steel

e5-86 zSelect Clamp/Size Select FinishE5-xEtFxEQFxEkx

E5 Cable ClampETF Trifoil ClampEQF Quadfoil ClampEK Cable Clamp

20m Roll

Hot Dip Galvanised or Stainless Steel only

Hot Dip Galvanised or Stainless Steel only Hot Dip Galvanised only


CABle ClAMPS/CoNduiT BeAM ClAMPS

CABle ClAMPS/CoNduiT BeAM ClAMPS

eCBC CondUit bEaM ClaMP

Ø D

B

A

D

C

eCBC Available Sizes/details

Example

HS

Hot Dip GalvanisedStainless Steel*

eCBC-16-32 HSelect FinishSelect eCBC

16222950

Specify Beam Thickness (mm)

162025324050

Select Ø d (mm)

HoW To order eCBC CoNduiT BeAM ClAMPS

*ECBC 22, 29 and 50mm only

orderingCode

Suit BeamThickness (mm)

161616161616

ECBC-16-16ECBC-16-20ECBC-16-25ECBC-16-32ECBC-16-40ECBC-16-50

162025324050

161616161616

343434343434

414141414141

Conduit(Ø d)

B(mm)

A (mm)

C(mm)

474747474747

d(mm)

222222222222

162025324050

222222222222

353535353535

454545454545

474747474747


292929292929

162025324050

292929292929

393939393939

595959595959

626262626262


505050505050

162025324050

505050505050

393939393939

848484848484

757575757575


Suit 16mm Thick Beam






SPA

N


69kg80kg

96kg114kg

50kg

102

600450

300150

750

67

900

FrPFrP

HoW To order FrP CABle lAdder

Example

FRP Fibre Reinforced Plastic

N2 l 300 FrPApply Finish

n2 Nema 2Select ladder Size

lSpecify ladder Select Width (mm)

Ladder 150300450600750900

e1000 CHannEl

MAX loAd (kg)0 1500750250 500 3000

3989171274 1019 34SPAN (mm)

43.0

42.0

22.2 7.0

HeAVy duTy• Supplied in 6m lengths• 43x42mm• 4mm THK

Use Ordering Code:e1000FrP

S SPliCE

VS vERtiCal SPliCE



Example

Example

Example



Material: FrP

Stainless Steel Fasteners supplied for installation.

Splice Plates required to install fittings on FRP Cable Ladder.

Hdu Hold down Unit

Nema 2N2S [FrP]

Nema 2N2VS [FrP]

Nema 2N2HS [FrP]

Nema 2N2Hdu [FrP]


BeP blind End PlatE

Used to cover ends of cable ladder lengths.

Nema 2N2BeP [FrP]

Material: FrP

Stainless Steel Fastener supplied for installation.


Material: FrP


Splice Plates required to install fittings to FRP Cable Ladder.

Material: FrP


Splice Plates required to install fittings to FRP Cable Ladder.


FrPFrP

Sr StRaiGHt REdUCER


B bEnd er ExtERnal RiSER


C CRoSS

W

W

W

W

W

*Custom fittings are available upon request. Contact your nearest EzyStrut branch for more information.

W1

W2

W1

W2

W1

W2

HoW To order FrP CABle lAdder FiTTiNgS


Example


N2 T 300 6 FrPApply Finish


bERiRtC


Select Width (mm)


369

Select radius (mm)

300600900


Example


N2 rHr 600 450 FrPApply Finish


SRlHRRHR


Select Width 1 (mm)


Select Width 2 (mm)

150300450600750

R

R

R

R

R

SouTH AuSTrAliA — HeAd oFFiCe580 Prospect Road, Kilburn, South Australia, 5084Tel: 08 8360 4550 Fax: 08 8360 4590email: [email protected] NeW SouTH WAleSLot 304 Progress Circuit, Prestons, New South Wales, 2170Tel: 02 8783 7555 Fax: 02 8783 7666email: [email protected] ViCToriA25 Marwen Drive, Derrimut, Victoria, 3030Tel: 03 8368 7555 Fax: 03 8368 7599email: [email protected]

WeSTerN AuSTrAliA12 Vale Street, Malaga, Western Australia, 6090Tel: 08 9249 7966 Fax: 08 9249 7855email: [email protected]

queeNSlANd25 Machinery Street, Darra, Queensland, 4076Tel: 07 3259 6844 Fax: 07 3259 6855email: [email protected]

best VAluebest serVicebest leAd times

PPP

Cable & Pipe Supports

March 2014

Date post:	25-Mar-2018
Category:	Documents
Upload:	dangthuan
View:	224 times
Download:	2 times

Cable Support Systems - · PDF filee2000 RibbEd CHannEl MAX loAd (kg) 0 250 500750 1500 3000...

Documents