+ All Categories
Home > Documents > CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and...

CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and...

Date post: 16-Nov-2018
Category:
Upload: trinhthien
View: 275 times
Download: 7 times
Share this document with a friend
13
CABLE TRAY SYSTEM CABLE TRAY ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according to the following specifications and standards: Types of cable tray : Perforated bottom trays (Oval Perforation) Solid bottom trays Classifications: Medium Duty Heavy Duty Extra Heavy Duty Construction Material: Cold Rolled Steel Sheets, to BS 1449 Aluminum Sheets. Stainless Steel Sheets SS304, and SS316. Product Finish: Hot Dip Galvanized to BS EN 1461 (formerly BS 729) Industrial Epoxy Powder Coating. Note: Other sizes and thicknesses not mentioned in the catalogue are available upon request Product Standards: BS EN 61537: 2007 Cable Management Cable Tray System. NEMA VE-1 Introduction 4
Transcript
Page 1: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRAY

SYS

TEM

CABLE TRAY

ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according to the following specifications and standards:

Types of cable tray : Perforated bottom trays (Oval Perforation) Solid bottom trays

Classifications: Medium Duty Heavy Duty Extra Heavy Duty

Construction Material: Cold Rolled Steel Sheets, to BS 1449 Aluminum Sheets. Stainless Steel Sheets SS304, and SS316.

Product Finish: Hot Dip Galvanized to BS EN 1461 (formerly BS 729) Industrial Epoxy Powder Coating.

Note: Other sizes and thicknesses not mentioned in the catalogue are available upon request

Product Standards: BS EN 61537: 2007 Cable Management Cable Tray System. NEMA VE-1

Introduction

4

Page 2: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRAY

SYS

TEM

Type CTP Type CTS

Perforated Cable tray Solid Cable tray

25 mm

50 mm

85 mm

100 mm

Straight Tray Ordering Way :

CTP 50 - 300 - HG

CTP: Cable Tray Perforated

CTS: Cable Tray Solid

25

50

85

100

50

75

100

150

225

300

400

450

600

750

900

PG: Pre galvanized Steel

HG: Hot Dip Galvanized

AL: Aluminum

S4: Stainless Steel 304

S6: Stainless Steel 316

CA: Corten-A Steel

HP: Hot Dip Galvanized

& Epoxy Powder Coated

Side Height (mm) Width (mm) Material/Finish.Model

Example:

Cable Tray Standard Length IS 2.44 Mtr, 3.00 Mtr length is Available Upon RequestCable Tray Material Thickness: 1.00 mm, 1.20 mm, 1.50 mm, and 2.00 mm.

Note:

* For other finishing, consult factory

Introduction

5

Page 3: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRAY

SYS

TEM 25 mm

CTP: Perforated Cable Tray

M/F: Please Specify the Type of Material and FinishPlease Specify the Thickness of Cable Tray

Note:

CTS: Solid Cable Tray

CTP 25-50-M/F

CTP 25-75-M/F

CTP 25-100-M/F

CTP 25-150-M/F

CTP 25-225-M/F

CTP 25-300-M/F

CTP 25-400-M/F

CTP 25-450-M/F

CTP 25-600-M/F

CTP 25-750-M/F

CTP 25-900-M/F

Width ( mm )Part Number Weight (Kg/Mtr)

50

75

100

150

225

300

400

450

600

750

900

0.97

1.17

1.38

1.78

2.39

4.50

5.71

6.32

8.14

9.96

11.79

CTS: Solid Calbe Tray

CTS 25-50-M/F

CTS 25-75-M/F

CTS 25-100-M/F

CTS 25-150-M/F

CTS 25-225-M/F

CTS 25-300-M/F

CTS 25-400-M/F

CTS 25-450-M/F

CTS 25-600-M/F

CTS 25-750-M/F

CTS 25-900-M/F

Width ( mm )Part Number Weight (Kg/Mtr)

50

75

100

150

225

300

400

450

600

750

900

1.09

1.29

1.52

1.96

2.63

4.95

6.28

6.95

8.96

10.96

12.96

Medium Duty Type

6

Page 4: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRAY

SYS

TEM

CTP: Perforated Cable Tray CTS: Solid Cable Tray

50 mm

Heavy Duty Type

CTP 50-50-M/F

CTP 50-75-M/F

CTP 50-100-M/F

CTP 50-150-M/F

CTP 50-225-M/F

CTP 50-300-M/F

CTP 50-400-M/F

CTP 50-450-M/F

CTP 50-600-M/F

CTP 50-750-M/F

CTP 50-900-M/F

Width ( mm )Part Number Weight (Kg/Mtr)

50

75

100

150

225

300

400

450

600

750

900

2.30

2.60

2.70

3.50

4.30

5.20

8.42

9.20

11.60

14.00

16.18

CTS 50-50-M/F

CTS 50-75-M/F

CTS 50-100-M/F

CTS 50-150-M/F

CTS 50-225-M/F

CTS 50-300-M/F

CTS 50-400-M/F

CTS 50-450-M/F

CTS 50-600-M/F

CTS 50-750-M/F

CTS 50-900-M/F

Width ( mm )Part Number Weight (Kg/Mtr)

50

75

100

150

225

300

400

450

600

750

900

2.90

3.20

3.40

4.10

5.01

6.00

9.27

10.16

12.83

15.50

18.18

M/F: Please Specify the Type of Material and FinishPlease Specify the Thickness of Cable Tray

Note:

7

Page 5: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRAY

SYS

TEM

M/F: Please Specify the Type of Material and FinishPlease Specify the Thickness of Cable Tray

Note:

Side Height85 mm

Side Height100 mm

CTP 85-100-M/F

CTP 85-150-M/F

CTP 85-250-M/F

CTP 85-300-M/F

CTP 85-400-M/F

CTP 85-450-M/F

CTP 85-600-M/F

CTP 85-750-M/F

CTP 85-900-M/F

Width ( mm )Part Number Weight (Kg/Mtr)

100

150

225

300

400

450

600

750

900

3.52

4.13

5.04

5.95

9.54

10.73

12.80

15.23

17.66

CTS 85-100-M/F

CTS 85-150-M/F

CTS 85-250-M/F

CTS 85-300-M/F

CTS 85-400-M/F

CTS 85-450-M/F

CTS 85-600-M/F

CTS 85-750-M/F

CTS 85-900-M/F

Width ( mm )Part Number

100

150

225

300

400

450

600

750

900

Weight (Kg/Mtr)

3.9

4.54

5.55

6.54

10.52

11.40

14.08

16.75

19.42

CTP 100-100-M/F

CTP 100-150-M/F

CTP 100-250-M/F

CTP 100-300-M/F

CTP 100-400-M/F

CTP 100-450-M/F

CTP 100-600-M/F

CTP 100-750-M/F

CTP 100-900-M/F

Width ( mm )Part Number Weight (Kg/Mtr)

100

150

225

300

400

450

600

750

900

3.89

4.50

5.41

6.32

10.04

10.90

13.28

15.71

18.14

CTS 100-100-M/F

CTS 100-150-M/F

CTS 100-250-M/F

CTS 100-300-M/F

CTS 100-400-M/F

CTS 100-450-M/F

CTS 100-600-M/F

CTS 100-750-M/F

CTS 100-900-M/F

Width ( mm )Part Number Weight (Kg/Mtr)

100

150

225

300

400

450

600

750

900

4.27

4.95

5.95

6.75

11.04

11.94

14.61

17.29

19.96

Extra Heavy Duty Type

85 mm

CTP: Perforated Cable Tray CTS: Solid Cable Tray

100 mm

85 mm

100 mm

8

Page 6: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRA

Y S

YSTE

M

9

Loading Charts

CA

BLE

TRAY

SYS

TEM

Loading Charts

9

Page 7: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRAY

SYS

TEM

Tray Fittings Ordering Way :

CTP B90 50 - 300 - HG

CTP: Cable Tray Perforated

CTS: Cable Tray Solid

25

50

85

100

50

75

100

150

225

300

400

450

600

750

900

PG: Pre galvanized Steel

HG: Hot Dip Galvanized

AL: Aluminum

S4: Stainless Steel 304

S6: Stainless Steel 316

CA: Corten-A Steel

HP: Hot Dip Galvanized

& Epoxy Powder Coated

Side Height (mm) Width (mm) Material/Finish.Model

Example:

B90-90 Deg Bend

B45-45 Deg Bend

T-Tee

X-Cross

RI90-90 Deg Inside Riser

RI45-45 Deg Inside Riser

RO90-90 Deg outside Riser

RO45-45 Deg outside Riser

RS-Standard Reducer

RR-Right Hand Reducer

RL-Left Hand Reducer

Type

*For other finishing consult factory

Cable Tray Fittings

10

Page 8: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRAY

SYS

TEM

90 Deg Hor.Bend

CTP - B90

Perforated Type

90 Deg Bend

CTS - B90

Solid Type 90

Deg Bend

H ( mm )Prefix W ( mm ) M/F Material

25

50

85

100

50

75

100

150

225

300

400

450

600

750

900

PG

HG

AL

S4

S6

CA

HP

TeeT

CTP - T

Perforated Type

Tee

CTS - T

Solid Type Tee

H ( mm )Prefix W ( mm ) M/F Material

25

50

85

100

50

75

100

150

225

300

400

450

600

750

900

PG

HG

AL

S4

S6

CA

HP

CrossX

CTP - X

Perforated Type

Cross

CTS - X

Solid Type Cross

H ( mm )Prefix W ( mm ) M/F Material

25

50

85

100

50

75

100

150

225

300

400

450

600

750

900

PG

HG

AL

S4

S6

CA

HP

* Also available in 45 Deg. Use Prefix B45

Cable Tray Fittings

11

Page 9: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRAY

SYS

TEM

90 Deg Inside RiserRI90

CTP - RI90

Perforated Type

90 Deg Inside

Riser

CTS - RI90

Solid Type 90

Deg Inside Riser

H ( mm )Prefix W ( mm ) M/F Material

25

50

85

100

50

75

100

150

225

300

400

450

600

750

900

PG

HG

AL

S4

S6

CA

HP

* Also available in 45 Deg. Use Prefix RI45

90 Deg Outside RiserRO90

CTP -RO90

Perforated Type

90 Deg Outsid

Riser

CTS - RO90

Solid Type 90

Deg Outside

Rise

H ( mm )Prefix W ( mm ) M/F Material

25

50

85

100

50

75

100

150

225

300

400

450

600

750

900

PG

HG

AL

S4

S6

CA

HP

* Also available in 45 Deg. Use Prefix RO45

Standard ReducerRS

CTP - RS

Perforated Type

Reducer

CTS - RS

Solid Type

Reducer

H ( mm )PrefixW1

( mm ) M/F Material

25

50

85

100

50

75

100

150

225

300

400

450

600

750

900

PG

HG

AL

S4

S6

CA

HP

W2( mm )

50

75

100

150

225

300

400

450

600

750

900

Cable Tray Fittings

12

Page 10: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRAY

SYS

TEM

Right Hand ReducerRR

CTP - RR90

Perforated Type

Right Hand

Reducer

CTS - RR90

Solid TypeRight

Hand Reducer

H ( mm )Prefix M/F Material

25

50

85

100

PG

HG

AL

S4

S6

CA

HP

Left Hand ReducerRL

CTP - RL

Perforated

Type Left Hand

Reducer

CTS - RL

Solid Type Left

Hand Reducer

H ( mm )Prefix M/F Material

25

50

85

100

PG

HG

AL

S4

S6

CA

HP

W1( mm )

50

75

100

150

225

300

400

450

600

750

900

W2( mm )

50

75

100

150

225

300

400

450

600

750

900

W1( mm )

50

75

100

150

225

300

400

450

600

750

900

W2( mm )

50

75

100

150

225

300

400

450

600

750

900

Cable Tray Fittings

Add - on BranchAOB

CTP - AOB

Perforated

Type Add - on

Branch

Branch

CTS - AOB

Solid Type Add - on

H ( mm ) W ( mm )Prefix M/F Material

25

50

85

100

PG

HG

AL

S4

S6

CAHP

50

75

100

150

225

300

400

450600

750

900

CA

BLE

TRAY

SYS

TEM

90 Deg Inside RiserRI90

CTP - RI90

Perforated Type

90 Deg Inside

Riser

CTS - RI90

Solid Type 90

Deg Inside Riser

H ( mm )Prefix W ( mm ) M/F Material

25

50

85

100

50

75

100

150

225

300

400

450

600

750

900

PG

HG

AL

S4

S6

CA

HP

* Also available in 45 Deg. Use Prefix RI45

90 Deg Outside RiserRO90

CTP -RO90

Perforated Type

90 Deg Outsid

Riser

CTS - RO90

Solid Type 90

Deg Outside

Rise

H ( mm )Prefix W ( mm ) M/F Material

25

50

85

100

50

75

100

150

225

300

400

450

600

750

900

PG

HG

AL

S4

S6

CA

HP

* Also available in 45 Deg. Use Prefix RO45

Standard ReducerRS

CTP - RS

Perforated Type

Reducer

CTS - RS

Solid Type

Reducer

H ( mm )PrefixW1

( mm ) M/F Material

25

50

85

100

50

75

100

150

225

300

400

450

600

750

900

PG

HG

AL

S4

S6

CA

HP

W2( mm )

50

75

100

150

225

300

400

450

600

750

900

Cable Tray Fittings

13

Page 11: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRAY

SYS

TEM

Straight Cover Ordering Way :

CTP - 300 - HG

SCT: Solid Cover

VCT: Louvered Cover

50

75

100

150

225

300

400

450

600

750

900

PG: Pre galvanized Steel

HG: Hot Dip Galvanized

AL: Aluminum

S4: Stainless Steel 304

S6: Stainless Steel 316

CA: Corten-A Steel

HP: Hot Dip Galvanized

& Epoxy Powder Coated

Width (mm) Material/Finish.Model

Example:

* For other finishing consult factory

Cable Tray Covers

SCT - B90 - 300 - HG

SCT: Solid Cover

VCT: Louvered Cover

50

75

100

150

225

300

400

450

600

750

900

PG: Pre galvanized Steel

HG: Hot Dip Galvanized

AL: Aluminum

S4: Stainless Steel 304

S6: Stainless Steel 316

CA: Corten-A Steel

HP: Hot Dip Galvanized

& Epoxy Powder Coated

Width (mm) Material/Finish.Model

* For other finishing consult factory

B 90

B 45

T

X

RI 90

RI 45

RO 90

RO 45

RS

RR

RL

Fitting Type

Fittings Cover Ordering Way :

Example:

SCT Type: Solid Cover VCT Type: Louver Cover

14

Page 12: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRAY

SYS

TEM

Cable Tray Accessories

External CouplerEXC

Part Number: EXC-HH: Cable Tray Height

Standard Straight CouplerSTCS

Part Number: STCS-HH: Cable Tray Height

L - Type Straight CouplerSTCL

Part Number: STCL-HH: Cable Tray Height

Vertical Adjustable CouplerVEC

Part Number: VEC-HH: Cable Tray Height

Expansion CouplerEPC

Part Number: EPC-HH: Cable Tray Height

Reducing CouplerREC

Part Number: REC-HH: Cable Tray Height

Cranked CouplerCRC

15

Page 13: CABLE TRAY - ICMS Trays · cable tray system ICMS cable tray system including Fittings and accessories is manufactured with return flange in a standard length of 2.44Mtr, according

CA

BLE

TRAY

SYS

TEM

Cable Tray Accessories

Blind EndBE

Part Number: BE-WW: Cable Tray Width

Drop OutDO

Part Number: DO-WW: Cable Tray Width

Earth Continuity StrapECS

Part Number: ECSMaterial: CopperFinish: Electro Tinned

Horizontal BarrierHOB

Part Number: HOB-HH: Cable Tray Height

Cover BracketCOB

Part Number: COB-HH: Cable Tray Height

Fish PlateFP

Part Number: FP-W-M/FH: Cable Tray Width

Use M6X16mm Bolt for fixing cable tray fittings and accessories, to be ordered separately

Note:

16


Recommended