26
RMS Connectors Trunk CATV Broadband Products ■Connectors Trunk series Drop series Adapter ■Filters High-pass Low-pass Band-rejection Band-pass RSA attenuator Windows CERTIFICATE NO.4991
RMS Connectors Trunk
CATV Broadband Products
■Connectors Trunk series Drop series Adapter
■Filters High-pass Low-pass Band-rejection Band-pass RSA attenuator Windows
CERTIFICATE NO.4991
R M S C o m m u n i c a t i o n s I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 1
CTK 3-Piece Pin Type RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
CTK Pin Type Series Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin
plating providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Three-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of
the connector
● All facilities meet ISO 9001 standards
CTK Series Family
Copyright ©2005 All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Ordering Information Part Number Body & Nut Hexagon CTK412P-P3 1” CTK440P-MC2 1” CTK500P-P3 1” CTK500P-MC2 1”
CTK540P-QR 1” CTK565P-TX 1” CTK625P-P3 1” CTK715P-QR 1-1/4”
CTK750P-P3 1-1/4” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 Add letter “S” to connector number for short pin version”40mm” In lieu of standard length “58.7” Example: CTK500P-P3-S Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 30 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃ Interface Meet SCTE IPS SP 501
CERTIFICATE NO. 4991
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n s I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 2
CTK Splice Series Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin
plating providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Three-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of
the connector
● All facilities meet ISO 9001 standards
CTK 3-Piece Splice RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
Ordering Information Part Number Body & Nut Hexagon CTK412SP-P3 1” CTK440SP-MC2 1” CTK500SP-P3 1” CTK500SP-MC2 1” CTK540SP-QR 1” CTK565SP-TX 1” CTK625SP-P3 1” CTK715SP-QR 1-1/4”
CTK750SP-P3 1-1/4” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 30 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃
CERTIFICATE NO. 4991
CTK Series Family
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n s I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 3
CTK 3-Piece “F”Female RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
CTK “F”Female series features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin
plating providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Three-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of
the connector
● All facilities meet ISO 9001 standards
Ordering Information Part Number Body & Nut Hexagon CTK412FF-P3 1” CTK440FF-MC2 1”
CTK500FF-P3 1” CTK500FF-MC2 1”
CTK540FF-QR 1”
CTK565FF-TX 1”
CTK625FF-P3 1” CTK715FF-QR 1-1/4”
CTK750FF-P3 1-1/4” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 25 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃ Interface Meet SCTE IPS SP 400
CERTIFICATE NO. 4991
CTK Series Family
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n s I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 4
CTK 3-Piece “F”Male RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
CTK “F”Male series features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin
plating providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Three-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of
the connector
● All facilities meet ISO 9001 standards
Ordering Information Part Number Body & Nut Hexagon
CTK412FM-P3 1” CTK440FM-MC2 1”
CTK500FM-P3 1” CTK500FM-MC2 1” CTK540FM-QR 1”
CTK565FM -TX 1”
CTK625FM-P3 1” CTK715FM-QR 1-1/4”
CTK750FM-P3 1-1/4” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 25 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃ Interface Meet SCTE IPS SP 401
CERTIFICATE NO. 4991
CTK Series Family
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n s I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 5
CTK 3-Piece Cable Terminator RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
CTK Terminator Series Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin
plating providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Three-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of
the connector
● All facilities meet ISO 9001 standards
Ordering Information Part Number Body & Nut Hexagon CTK412TR-P3 1” CTK440TR-MC2 1”
CTK500TR-P3 1”
CTK500TR-MC2 1”
CTK540TR-QR 1”
CTK565TR-TX 1”
CTK625TR-P3 1” CTK715TR-QR 1-1/4”
CTK750TR-P3 1-1/4” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 30 dB @1GHz Operating Range : - 40℃ to +60℃
CERTIFICATE NO. 4991
CTK Series Family
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n s I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 6
CTK 3-Piece Ext Pin Type RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
CTK Extension Series Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin plating
providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Three-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of the
connector
● All facilities meet ISO 9001 standards
Ordering Information Part Number Body & Nut Hexagon CTK412EX-P3 1” CTK440EX-MC2 1”
CTK500EX-P3 1” CTK500EX-MC2 1”
CTK540EX-QR 1”
CTK565EX-TX 1”
CTK625EX-P3 1” CTK715EX-QR 1-1/4”
CTK750EX-P3 1-1/4” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 The part numbers listed are for the 3" extension length. Extensions are also available in 4.5” , 6” and 9” length.To order the 4.5” , 6” and 9” extension length follow the example shown below Example: CTK500EX4.5-P3 CTK500EX6-P3 Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 30 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃ Interface Meet SCTE IPS SP 501
CERTIFICATE NO. 4991
CTK Series Family
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 7
CTK11 series RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
CTK11 series features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin
plating providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Three-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of
the connector
● All facilities meet ISO 9001 standards
CTK11 series family Copyright ©2005 . All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Ordering Information Part Number Body & Nut Hexagon CTK11P-RG 7/8” Pin Type CTK11SP-RG 7/8” Splice CTK11FF-RG 7/8” F Female CTK11FM-RG 7/8” F Male CTK11TR-RG 7/8” Terminator CTK11EX-RG 7/8” Extension 3”CTK11EX6-RG 7/8” Extension 6”Meet SCTE RG11 drop-cable Add letter “S” to connector number for short pin version”40mm” In lieu of standard length “58.7” Example: CTK11P-RG-S Example: CTK11EX6-RG-S Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 30 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃ Interface Meet SCTE IPS SP 501
CERTIFICATE NO. 4991
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 8
CTX 2-Piece Pin Type RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
CTX Pin Type Series Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin
plating providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Two-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of
the connector
● All facilities meet ISO 9001 standards
Ordering Information Part Number Body & Nut Hexagon CTX412P-P3 1” CTX440P-MC2 1”
CTX500P-P3 1” CTX500P-MC2 1” CTX540P-QR 1”
CTX565P-TX 1”
CTX625P-P3 1” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 Add letter “S” to connector number for short pin version”40mm” In lieu of standard length “58.7” Example: CTX500P-P3-S Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 30 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃ Interface Meet SCTE IPS SP 501
CERTIFICATE NO. 4991
CTX Series Family
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 9
CTX 2-Piece Splice RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
CTX Splice Series Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin
plating providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Two-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of
the connector
● All facilities meet ISO 9001 standards
Ordering Information Part Number Body & Nut Hexagon CTX412SP-P3 1” CTX440SP-MC2 1”
CTX500SP-P3 1” CTX500SP-MC2 1”
CTX540SP-QR 1”
CTX565SP-TX 1”
CTX625SP-P3 1” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 30 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃
CERTIFICATE NO. 4991
CTX Series Family
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 1 0
CTX 2-Piece “F”Female RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
CTX “F”Female Series Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin
plating providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Two-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of
the connector
● All facilities meet ISO 9001 standards
Ordering Information Part Number Body & Nut Hexagon CTX412FF-P3 1” CTX440FF-MC2 1”
CTX500FF-P3 1” CTX500FF-MC2 1”
CTX540FF-QR 1”
CTX565FF-TX 1”
CTX625FF-P3 1” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 30 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃ Interface Meet SCTE IPS SP 400
CERTIFICATE NO. 4991
CTX Series Family
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 1 1
CTX “F”Male Series Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin
plating providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Two-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of
the connector
● All facilities meet ISO 9001 standards
CTX 2-Piece “F”Male RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
Ordering Information Part Number Body & Nut Hexagon CTX412FM-P3 1” CTX440FM-MC2 1”
CTX500FM-P3 1” CTX500FM-MC2 1”
CTX540FM-QR 1”
CTX565FM-TX 1”
CTX625FM-P3 1” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 30 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃ Interface Meet SCTE IPS SP 401
CERTIFICATE NO. 4991
CTX Series Family
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 Page 12
CTX Terminator Series Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin
plating providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Two-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of
the connector
● All facilities meet ISO 9001 standards
CTX 2-Piece Cable Terminator RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
Ordering Information Part Number Body & Nut Hexagon CTX412TR-P3 1” CTX440TR-MC2 1”
CTX500TR-P3 1” CTX500TR-MC2 1”
CTX540TR-QR 1”
CTX565TR-TX 1”
CTX625TR-P3 1” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 30 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃
CERTIFICATE NO. 4991
CTX Series Family
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 1 3
CTX Extension Series Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pin with bright acid tin plating
providing excellent RF conductivity
● Cable center conductor cutting guide
● Visible entry of center conductor into
seizing mechanism
● Same hexagon size used on both main body
and back unit
● Two-piece auto seizing design
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of the
connector
● All facilities meet ISO 9001 standards
CTX 2-Piece Ext Pin Type RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
Ordering Information Part Number Body & Nut Hexagon CTX412EX-P3 1” CTX440EX-MC2 1”
CTX500EX-P3 1” CTX500EX-MC2 1”
CTX540EX-QR 1” CTX565EX-TX 1”
CTX625EX-P3 1” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 The part numbers listed are for the 3" extension length. Extensions are also available in 4.5” , 6” and 9” length.To order the 4.5” , 6” and 9” extension length follow the example shown below Example: CTX500EX4.5-P3 CTX500EX6-P3 Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 30 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃ Interface Meet SCTE IPS SP 501
CERTIFICATE NO. 4991
CTX Series Family
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 1 4
CTX Feedthru Connector RMS SUPERFIT CATV Trunk & Distribution Connectors Product Information
CTX Feedthru Series Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Same hexagon size used on both main body
and back unit
● No torque wrench needed, metal to metal
positive stop, ensures proper tightening of
the connector
● All facilities meet ISO 9001 standards
Ordering Information Part Number Body & Nut Hexagon CTX412FT-P3 1” CTX440FT-MC2 1”
CTX500FT-P3 1” CTX500FT-MC2 1”
CTX540FT-QR 1”
CTX565FT-TX 1”
CTX625FT-P3 1” P3 : CommScope P3 / Times T10 MC2 : Trilogy MC2 QR : CommScope QR TX : Times TX10 Bandwidth : DC to 1GHz Nominal Impedance : 75 ohm Return Loss : > 30 dB @1GHz Insertion Loss : < 0.1 dB @1GHz Operating Range : - 40℃ to +60℃ Interface Standard 5/8-24 UNEF
CERTIFICATE NO. 4991
CTX Series Family
Copyright ©2005 All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS
Registered
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 1 5
90 Degree Adapter RMS SUPERFIT CATV Trunk Adapter Product Information
CT-D90 Series Features ● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Brass contact pins with bright acid tin
plating providing excellent RF conductivity
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● All facilities meet ISO 9001 standards
Ordering Information Part Number Extension Pin Extend From plane of housing CT-D90 58.7 mm
CT-D90EX3 3” 58.7 mm CT-D90EX4.5 4.5” 58.7 mm
CT-D90EX6 6” 58.7 mm CT-D90EX9 9” 58.7 mm
Specification Bandwidth :
DC to 1GHz
Nominal Impedance :
75 ohm
Return Loss :
> 25 dB @1GHz
Insertion Loss :
< 0.15 dB @1GHz
Operating Range :
- 40℃ to +60℃ Interface
Meet SCTE IPS-SP 501
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS Registered
CERTIFICATE NO. 4991
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 1 6
CT-D180 Series Features ● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Brass contact pins with bright acid tin
plating providing excellent RF conductivity
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● All facilities meet ISO 9001 standards
180 Degree Adapter RMS SUPERFIT CATV Trunk Adapter Product Information
Ordering Information Part Number Extension Pin Extend From plane of housing CT-D180 58.7 mm
CT-D180EX3 3” 58.7 mm CT-D180EX4.5 4.5” 58.7 mm
CT-D180EX6 6” 58.7 mm CT-D180EX9 9” 58.7 mm
Specification Bandwidth :
DC to 1GHz
Nominal Impedance :
75 ohm
Return Loss :
> 25 dB @1GHz
Insertion Loss :
< 0.15 dB @1GHz
Operating Range :
- 40℃ to +60℃ Interface
Meet SCTE IPS-SP 501
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS Registered
CERTIFICATE NO. 4991
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 1 7
Housing to Housing Adapter RMS SUPERFIT CATV Trunk Adapter Product Information
CT-HH-M Features ● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Brass contact pins with bright acid tin
plating providing excellent RF conductivity
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● 1” hexagon size used on all body
● Other types of CATV connectors
available
● All facilities meet ISO 9001 standards
Ordering Information Part Number Material Pin Extend From plane of housing CT-HH-M Aluminum 58.7 mm CT-HH-M-S Aluminum 40.0 mm
Specification Bandwidth :
DC to 1GHz
Nominal Impedance :
75 ohm
Return Loss :
> 25 dB @1GHz
Insertion Loss :
< 0.15 dB @1GHz
Operating Range :
- 40℃ to +60℃ Interface
Standard 5/8-24 UNEF
Copyright ©2005All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS Registered
CERTIFICATE NO. 4991
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 1 8
Female Splice Adapter RMS SUPERFIT CATV Trunk Adapter Product Information
CT-HH-FS Features ● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pins with bright acid tin
plating providing excellent RF conductivity
● center conductor cutting guide
● Other types of CATV connectors
available
● All facilities meet ISO 9001 standards
Ordering Information Part Number Material Body Hexagon CT-HH-FS Aluminum 19 mm CT-HH-FS-L Aluminum 25.4 mm
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS Registered
Specification Bandwidth :
DC to 1GHz
Nominal Impedance :
75 ohm
Return Loss :
> 25 dB @1GHz
Insertion Loss :
< 0.15 dB @1GHz
Operating Range :
- 40℃ to +60℃ Interface
Standard 5/8-24 UNEF
CERTIFICATE NO. 4991
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 1 9
Housing Terminator Adapter RMS SUPERFIT CATV Trunk Adapter Product Information
CT-TRM Features ● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pins with bright acid tin
plating providing excellent RF conductivity
● Printed circuit board construction ,
precision SMD components
● Fit for CATV trunk networks and
developed digital broadband applications
● All facilities meet ISO 9001 standards
Ordering Information Part Number Material Pin Extend From plane of housing CT-TRM Aluminum 58.7 mm CT-TRM-S Aluminum 40 mm
Specification Bandwidth :
DC to 1GHz
Nominal Impedance :
75 ohm
Return Loss :
> 25 dB @1GHz
Operating Range :
- 40℃ to +60℃ Interface
Meet SCTE IPS-SP 501
Copyright ©2005 RMS. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS Registered
CERTIFICATE NO. 4991
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 2 0
Hsg Male to “F”Female Adapter RMS SUPERFIT CATV Trunk Adapter Product Information
CT-625FG Features ● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pins with bright acid tin
plating providing excellent RF conductivity
● All facilities meet ISO 9001 standards
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS Registered
CERTIFICATE NO. 4991
Ordering Information Part Number Material Pin Extend From plane of housing CT-625FG Aluminum 40 mm CT-625BFG Brass 40 mm Insertion Loss: -0.1dB @ 1GHz Return Loss: -25dB @ 1GHz Temperature Range: -40° to +60° C Impedance: 75 Ohms Meet SCTE IPS-SP 400 Meet SCTE IPS-SP 501
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 2 1
Hsg Male to “F”Female Adapter RMS SUPERFIT CATV Trunk Adapter Product Information
CT-625F Features ● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Brass contact pins with bright acid tin
plating providing excellent RF conductivity
● All facilities meet ISO 9001 standards
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS Registered
CERTIFICATE NO. 4991
Ordering Information Part Number Material Pin Extend From plane of housing CT-625F Aluminum 58.7 mm CT-625BF Brass 58.7 mm Insertion Loss: -0.2dB @ 1GHz Return Loss: -16dB @ 1GHz Temperature Range: -40° to +60° C Impedance: 75 Ohms Meet SCTE IPS-SP 400 Meet SCTE IPS-SP 501
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 2 2
RG11 Feedthru RMS SUPERFIT CATV RG11 Trunk Connectors Product Information
CT11-FT Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Same hexagon size used on both main
body and back unit
● All facilities meet ISO 9001 standards
STEP 1 STEP 2
STEP 3
Specification Bandwidth :
DC to 1GHz
Nominal Impedance :
75 ohm
Return Loss :
> 30 dB @1GHz
Insertion Loss :
< 0.1 dB @1GHz
Operating Range :
- 40℃ to +60℃ Interface
Standard 5/8–24 UNEF Thread
Fit RG11 60% to Quad shield
Ordering Information Part Number Cable Type Body Hexagon CT11-FT Series 11 19mm
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS Registered
CERTIFICATE NO. 4991
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 2 3
CT11-FTR Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Same hexagon size used on both main
● All facilities meet ISO 9001 standards
RG11 Feedthru RMS SUPERFIT CATV RG11 Trunk Connectors Product Information
STEP 1 STEP 2
STEP 3 STEP 4
When installation the cable will not rotate and the aluminum braided shield will not break
Specification Bandwidth :
DC to 1GHz
Nominal Impedance :
75 ohm
Return Loss :
> 30 dB @1GHz
Insertion Loss :
< 0.1 dB @1GHz
Operating Range :
- 40℃ to +60℃ Interface
Standard 5/8–24 UNEF Thread
Fit RG11 60% to Quad shield
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS Registered
Ordering Information Part Number Cable Type Body Hexagon CT11-FTR Series 11 19mm
CERTIFICATE NO. 4991
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 2 4
RG11 Feedthru RMS SUPERFIT CATV RG11 Trunk Connectors Product Information
Electrical Bandwidth :
DC to 1GHz
Nominal Impedance :
75 ohm
Return Loss :
> 30 dB @1GHz
Insertion Loss :
< 0.1 dB @1GHz
Operating Range :
- 40℃ to +60℃
Interface
● Standard 5/8–24 UNEF Thread
● Fit for RG11 60% to Quad shield(PE Jacket)
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission RMS Registered
Ordering Information Part Number Cable Type Body Hexagon CT11-FT-PE Series 11 19mm / 0.75”
CT11-FT-PE Features ● Part numbers are permanently marked on
the connector for easy identification
● Uses 6262 aluminum alloy for excellent
corrosion resistance
● Moisture-proof through durable design
and implementation of UV ozone-resistant
EPDM O-rings
● Same hexagon size used on both main
body and back unit
● All facilities meet ISO 9001 standards
STEP 1 STEP 2
CERTIFICATE NO. 4991
Developed For Digital BroadbandCommunications Applications
R M S C o m m u n i c a t i o n I n c - 1 - 8 0 0 - 2 2 3 - 8 3 1 2 P a g e 2 5
RG11 Crimp Type RMS SUPERFIT CATV RG11 Trunk Connectors Product Information
Electrical Bandwidth :
DC to 1GHz
Nominal Impedance :
75 ohm
Return Loss :
> 30 dB @1GHz
Insertion Loss :
< 0.1 dB @1GHz
Operating Range :
- 40℃ to +60℃
Interface
● Standard 5/8–24 UNEF Thread
● Fit RG11 60% to Quad shield
Copyright ©2005. All rights reserved. Reproduction in whole or in part in any form or medium with out express written permission of RMS Registered
CT11-CRR Features • One-piece crimp design, eliminates lost or mismatched components • Fits most 11 series cable from 60% braid coverage through quad shield • Free spinning nut, 19mm hexagon (3/4-inch compatible) • Wide hexagon nut for ease of tightening • Pull strength much better than cable specs • All facilities meet ISO 9001 standards • Standard crimp tool: 0.475” hex
CERTIFICATE NO. 4991
Ordering Information Part Numbers Cable Type Crimp Tool Hexagon CT11-CRR Series 11 0.475”
Developed For Digital BroadbandCommunications Applications
