CAD / CAM- POLISHING SYSTEMS...1 LUSTER® for Zirconia 2-3 ®LUSTER for e.max® 4-5 LUSTER® for...

CAD / CAM-POLISHING SYSTEMSincluding current test reports and awards

Bring your

CAD / CAM- restorations up to a high gloss finish ...

... with the new MEISINGER LUSTER® polishing systems.

Quality that catches the eye.

1

LUSTER® for Zirconia 2-3 LUSTER® for e.max® 4-5

LUSTER® for Enamic® 6-7

LUSTER® for Suprinity® 8-9

LUSTER® for LavaTM Ultimate 10-11

Other MEISINGER polishing systems 12-13

CAD / CAM-block materials at a glance 13

MEISINGER polishing systems – Test reports and awards 14-15

MEISINGER products in practical testing 16-17

Content

2

LUSTER®

for Zirconia

Fig.. Shank1 Ref.-No. Size Pieces/Kit

9736H HP 805 104 042 535 150 1

Z652R HP 655 104 199 526 035 1

DCA04 HP 803 104 243 524 040 1

DCA06 HP 803 104 373 524 170 1

DCA10 HP 803 104 243 514 040 1

DCA12 HP 803 104 373 514 170 1

1 104=HP

9

Z

D

DC

DC

D


Z0801 FG 806 314 001 324 010 1

Z0850 FG 806 314 198 324 018 1

Z0833 FG 806 314 277 324 023 1

DCA04 RA 803 204 244 524 040 1

DCA13 RA 803 204 030 525 060 1

DCA10 RA 803 204 244 514 040 1

DCA14 RA 803 204 030 514 060 1

1 204=RA, 314=FG

Z

Z

D

D

D

D

�

Top grade in

Clinicians Report

(see page 14)

LUS91

Intraoral Adjusting and Polishing set

LUS85

Extraoral HP Laboratory Set

Blue ring | Universal grinding | Grit: medium| 524 | 64–126 �m

53

*www.dentaladvisor.com

Unprocessed state of a fully anatomical zirconium

oxide crown

9736H: Trimming the contact point,

Recommended rotary speed: 8.000 - 12.000 rpm

DCA06: Smoothing of the crown external shape,


DCA12: High gloss polishing of the crown external shape,


Z652R: Grinding of the crown external shape,


DCA04: Targeted smoothing of the occlusal surface,


DCA10: High gloss polishing of the occlusal surface without high

pressure, Recommended rotary speed: 7.000 - 12.000 rpm

Result: Excellent high gloss by polishing with LUSTER® set

LUS85

Quick and

easy without

polishing paste

The MEISINGER LUSTER® for Zirconia polishing system has been specially developed for use on monolithic zirconium oxide restorations, e.g. LavaTM Plus. The system includes diamond polishers for intraoral and extra-oral use. Both sets consist of a two-stage polishing system that can be used entirely without polishing paste

and produces an excellent high gloss finish. Further instruments for adjusting contact points or areas round off the system perfectly. The instruments are well organized in the high quality bur block and can be conve-niently sterilized after use.

Convincing results for MEISINGER LUSTER® for Zirconia in Clinicians Report and Dental Advisor:

56 % of doctors would switch to MEISINGER LUSTER® for Zirconia and 86 % would recommend it* (further information page 14).

LavaTM is a registered trademark of 3M

4


DPO02 RA 803 204 244 522 040 1

DPO07 RA 803 204 030 592 060 1

DPO05 RA 803 204 244 512 040 1

DPO08 RA 803 204 030 512 060 1

Z0801 FG 806 314 001 324 010 1

Z850F FG 806 314 198 314 018 1

Z833F FG 806 314 277 314 023 1

1 204=RA, 314=FG

D

D

D

D

Z

Z

Z


9736G HP 805 104 042 525 150 1

DPO02 HP 803 104 243 522 040 1

DPO03 HP 803 104 372 522 110 1

DPO05 HP 803 104 243 512 040 1

DPO06 HP 803 104 372 512 110 1

1 104=HP

9

D

D

D

D

�

�

LUS100


LUS80

Extraoral HP Laboratory Set

Top grade in

Clinicians Report

(see page 14)

Blue ring | Universal grinding | Grit: medium| 524 | 64–126 �m

Red ring | Smoothing | Grit: fine | 514 | 27–76 �m

LUSTER®

for e.max® (Lithium Disilicate)

7

*www.dentaladvisor.com

5

Unprocessed state of a fully anatomical lithium

disilicate crown

DPO02: Targeted smoothing of the occlusal surface,


DCA05: High gloss polishing of the occlusal surfaces without high



LUS80

9736G: Trimming the contact point,


DPO03: Smoothing of the crown external shape,


DPO06: High gloss polishing of the crown external shape,

Recommended rotary speed: 7.000 -12.000 rpm

Quick and

easy without

polishing paste

The MEISINGER LUSTER® for e.max® polishing system has been specially developed for use on lithium disilicate restorations. The diamond polishers included are suitable for intraoral and extraoral use. LUSTER® for e.max® offers the user a two-stage polishing system entirely without polishing paste. The result is convincing

with its brilliant high gloss. Further instruments for grin-ding contact points or areas round off the system perfectly. The instruments are well organized in the high quality bur block and can be conveniently sterilized after use.

MEISINGER LUSTER® for e.max® convinced Clinicians Report and Dental Advisor evaluators where 87 %

would switch to MEISINGER LUSTER® for e.max® and 89 % would recommend it* (further information page 14).

IPS e.max® is a registered trademark of Ivoclar Vivadent GmbH

6

LUSTER®

for Enamic®


9501U HP 658 104 257 523 055 1

9507U HP 658 104 292 523 050 1

9509U HP 658 104 044 523 110 1

9508U HP 658 104 310 523 110 1

9780 HP 803 104 243 523 055 1

9786 HP 803 104 292 523 050 1

9782 HP 803 104 304 523 145 1

9787 HP 803 104 372 523 145 1

1 104=HP

9

9

9

9

9

9

9

9


9502U RA 658 204 300 523 045 1

9503U RA 658 204 297 523 030 1

9504U RA 658 204 030 523 070 1

9505U RA 658 204 310 523 110 1

9780 RA 803 204 243 522 040 1

9785 RA 803 204 297 523 030 1

9781 RA 803 204 030 522 060 1

9782 RA 803 204 304 522 100 1

1 204=RA

9

9

9

9

9

9

LUS02


LUS01

Extraoral HP Laboratory set

NEWfrom

MEISINGER

97

9509U: Smoothing of the crown external shape,


9780: High gloss polishing of the occlusal surface,


9508U: Targeted smoothing, e.g. fissures,


9786: High gloss polishing of the edges and occlusal surfaces,


The MEISINGER LUSTER® for Enamic® polishing system has been specially developed for use on hybrid ceramic restorations. The system consists of two sets, which are adapted for intraoral and extraoral use. The polishing instruments provide pre-polishing and high gloss po-lishing for a coordinated two-stage system. Occlusal

surfaces, cusps and fissures can be optimally processed without polishing pastes and are then impressive with their outstanding high gloss finish. The instruments are well organized in the high quality bur block and can be conveniently sterilized after use.

Enamic® is a registered trademark of VITA Zahnfabrik H. Rauter GmbH & Co. KG

Unprocessed state of a fully anato-

mical hybrid crown

9501U: Smoothing of the occlusal surface,

Recom. rotary speed: 7.000 - 10.000 rpm

9509U: Smoothing of the edges and occlusal surfaces, Recom. rotary speed: 7.000 - 10.000 rpm

9787: High gloss polishing of the crown external shape, Recom. rotary speed: 3.000 - 10.000 rpm

9782: Targeted high gloss polishing, e.g. fissures, Recom. rotary speed: 3.000 - 10.000 rpm

Result: Excellent high gloss by poli-

shing with LUSTER® set LUS01

Quick and

easy without

polishing paste

8

LUSTER®

for Suprinity®


DCA03 HP 803 104 303 524 200 1

DCA04 HP 803 104 243 524 040 1

DCA06 HP 803 104 373 524 170 1

9524V - 653 900 114 524 023 1

DCA09 HP 803 104 303 514 200 1

DCA10 HP 803 104 243 514 040 1

DCA12 HP 803 104 373 514 170 1

9524P - 653 900 114 514 023 11 104=HP

D

D

D

D

9

9

D

D


DCA15 RA 803 204 303 525 100 1

DCA04 RA 803 204 244 524 040 1

DCA13 RA 803 204 030 525 060 1

DCA16 RA 803 204 303 514 100 1

DCA10 RA 803 204 244 514 040 1

DCA14 RA 803 204 030 514 060 1

1 204=RA

D

D

D

D

D

D

LUS04


LUS03

Extraoral HP Laboratory set

NEWfrom

MEISINGER

119

Unprocessed state of a fully anatomical zirconium dioxide

reinforced lithium silicate crown

DCA03: Small targeted corrections,


DCA10: High gloss polishing of the occlusal surface without high


DCA12: High gloss polishing of the crown external shape,


DCA04: Targeted smoothing of the occlusal surface,


DCA06: Smoothing of the crown external shape,


DCA09: High gloss polishing of the corrections,



LUS03

Quick and

easy without

polishing paste

The MEISINGER LUSTER® for Suprinity® polishing system has been specially developed for use on VITA SUPRINITY®, a zirconium dioxide reinforced lithium sili-cate ceramic. Two different sets allow use in the laborato-ry and intraorally. Both sets contain pre-polishing and high gloss polishers, which are optimally coordinated in their

shape and grain size. The two-stage system is easy to use without polishing paste on occlusal surfaces, cusps and fis-sures and is convincing with its absolutely high gloss finish. The instruments are well organized in the high quality bur block and can be conveniently sterilized after use.

Suprinity® is a registered trademark of VITA Zahnfabrik H. Rauter GmbH & Co. KG

10

LUSTER®

for LavaTM Ultimate


9511U HP 658 900 372 523 220 1

9507P HP 652 104 292 513 050 1

9507H HP 652 104 292 503 050 1

9508H HP 652 104 303 503 145 1

100 HP 090 104 543 000 220 1

150 HP 080 104 045 000 220 1

1 104=HP

9

9

95

Exclusive

offer:

Polishing set + LavaTM

Ultimate CAD / CAM

Restorative

3M000

LavaTM Ultimate polishing set

1311

Unprocessed state of a fully anatomical resin nano-

ceramic crown

9507P: Smoothing of the occlusal surface and crown external

shape, Recommended rotary speed: 7.000 - 12.000 rpm

9508H: Targeted high gloss polishing, e.g. of fissures,


150: High gloss polishing of the crown with a cotton buff,


9511U: Trimming the contact point,


9507H: High gloss polishing of the occlusal surface and crown

external shape, Recommended rotary speed: 7.000 - 12.000 rpm

100: Working the polishing paste into the material surface using a

soft polishing brush, Recom. rotary speed:10.000 - 15.000 rpm


3M000

The MEISINGER LUSTER® for LavaTM Ultimate polishing set has been specially developed for use on resin nano-ceramic from 3M Espe. The set consists of instruments for extraoral work and polishing CAD/CAM restoration materials. A soft polishing brush that is used with polishing

paste and the cotton buff bring the restoration up to an excellent high gloss. The instruments are well organized in the high quality bur block and can be conveniently ste-rilized after use.


12

2605

CEREC® Advanced Kit

2609

CEREC® Polishing Kit

JK03

LUSTER® CAD / CAM Lab Kit by: Dr. James Klim DDS

LUS60

LUSTER® CEREC®

LUSTER® for CEREC®

Other MEISINGER polishing systems

13

LUS41

LUSTER® Lab Porcelain Polishing Kit

LUS30

LUSTER® Intraoral Porcelain Polishing Kit

LUSTER® for Porcelain

3M Espe LavaTM Plus - - - LavaTM Ultimate

Bego BeCe® CAD Zirkon HT+ - - - -

Dentsply -CeltraTM Duo

- - -

Glidewell BruxZir® - - - -

Heraeus Kulzer cara Zr / cara Zrtr cara LiSi2 - - -

Ivoclar Vivadent IPS e.max® ZirCAD IPS e.max® CAD - IPS Empress® CAD -

Sirona inCoris ZI - CEREC® Blocs - -

Vita VITA In-Ceram® YZVITA Suprinity®

VITABLOCS® - VITA Enamic®

13


BeCe® is a registered trademark of BEGO Bremer Goldschlägerei Wilh. Herbst GmbH & Co. KG

CeltraTM is a registered trademark of DENTSPLY DETREY GmbH

BruxZir® is a registered trademark of Glidewell Laboratories

IPS e.max® and IPS Empress® are registered trademarks of Ivoclar Vivadent GmbH

CEREC® is a registered trademark of Sirona Dental Systems GmbH

In-Ceram®, Suprinity®, VITABLOCS® and Enamic® are registered trademarks of VITA Zahnfabrik H. Rauter GmbH & Co. KG

Zirconium oxide Lithium disilicate Feldspar ceramic Leucite Hybrid ceramic

(zirconium reinforced)

(zirconium reinforced) (ceramic + polymer)

(nano-ceramic + polymer)

Selection of some providers of fully ceramic CAD/CAM materials

Type

Extr

aora

lIn

trao

ral

14

Product (Company)# of Steps Pieces

in Kit Price Instrument Durability

Surface Finish Rating CR Comments and Key FeaturesFinish* Polish BruxZir Lava Plus IPS e.max Lava Ultimate

CoreMaster (Shofu)

1‡ 0 2 $ 43.10 ExcellentExc-Good

Good Exc-Good Good Low price

Dialite LD extraoral (Brasseler USA)

1 2 9† $ 387.70 ExcellentExc-Good

Excellent Excellent ExcellentWell-established

brand

Dialite ZR extraoral (Brasseler USA)

1 2 9† $ 387.70 Excellent GoodExc-Good

Excellent ExcellentWell-established

brand

Luster for e.max extraoral (Meisinger)

1 2 5† $ 186.25 Good Excellent Excellent Excellent Excellent CR-Choice

Luster for zirconia extraoral (Meisinger)

1 2 6† $ 186.25 Excellent Excellent Excellent Excellent Excellent CR-Choice

Pre-market: APPS Outside (Cosmedent)

1 2 8 $ 129.95 Excellent Good Good Excellent Excellent Pre-market

BruxZir Adjustment and Polishing Kit (Glidewell Labs) 1 3 6† $ 69.00

Exc-Good

Good-Fair

Good-Fair

Exc-Good ExcellentIncludes finishing

Burs

BruxZir Adjustment and Polishing Set (Axis Dental) 1 2 5† $ 135.80 Good Good Good Exc-Good Excellent

Includes finishing Burs

Dialite HP intraoral (Brasseler USA)

1 2 9† $ 150.40 Good ExcellentExc-Good


brand

Dialite LD intraoral (Brasseler USA)

3 2 13† $ 193.15 ExcellentExc-Good

Excellent Excellent ExcellentWell-established

brand

Dialite ZR intraoral (Brasseler USA)

3 2 13† $ 193.15 Excellent GoodExc-Good


brand

LD / ZR Cut, Finish & Polish (Komet USA)

1 2 7† $ 115.00Exc-Good

Exc-Good

Exc-Good

Excellent ExcellentIncludes finishing

Burs

Luster for e.max intraoral (Meisinger)

1 2 7† $ 138.50 Good Excellent Excellent Excellent Excellent CR-Choice

Luster for zirconia intraoral (Meisinger)

1 2 7† $ 138.50 Excellent Excellent Excellent Excellent Excellent CR-Choice

OptraFine (Ivoclar Vivadent)

1 2 19 $ 150.00Exc-Good

Excellent Excellent Excellent Excellent CR-Choice, inc. paste

Pre-market: APPS Inside (Cosmedent)

1 2 8† $ 69.95 Excellent Good Good Excellent Excellent Pre-market

!

!

!

!

* Instruments indicated for restoration adjustment/reduction † Plus autoclavable bur block ‡ CoreMaster Coarse also available. Test results were obtained using both types sequentially.

www.cliniciansreport.org

MEISINGER polishing systems

Among all the polishing systems for CAD/CAM materials tested, the two MEISINGER polishing systems - LUSTER® for e.max®

(intraoral and extraoral) and LUSTER® for Zirconia (intraoral and extraoral) - scored the top grade.

Top grade CR-Choice affirms outstanding quality

15

IPS e.max® CAD Average Gloss Units (GU)

BruxZir Zirconia Gloss Units (GU)

Polisher System ~30 um diamond grind 1st step 2nd step

MEISINGER Luster LUS 80 Lithium Disilicate Adjusting and Polishing Kit

39.2 (4.0) 56.9 (2.0) 90.8 (1.9)

Axis LS-503 CERAGLAZE INTRA-ORAL POLISHING SET 33.8 (3.5) 60.5 (1.0) 88.3 (4.7)

KOMET LD/ZR Cut, Finish & Polish 30.9 (1.8) 39.5 (4.1) 89.0 (5.2)

!

Polisher System ~30 um diamond grind 1st step 2nd step

MEISINGER Luster Zirconia Adjusting and Polishing Kit 64.2 (2.8) 115.0 (9.2) 159.4 (3.4)

KOMET LD/ZR Cut, Finish & Polish 64.7 (4.1) 74.5 (4.0) 135.4 (3.7)

!

Compared with renowned competitor products, the two MEISINGER polishing systems - LUSTER® for e.max® and LUSTER®

for Zirconia - demonstrate the best results.

MEISINGER polishing systems take 1st place

Sources:

Clinicians Report, Feb. 2013

The Dental Advisor, Jun. 2013

16

0,5

1,0

2,0

2,5

1,5

20,0

60,0

40,0

100,0

80,0

11,8

1,03

20,0

30,0

40,0

31,64 38,35 33,18

1,32

1

2

4

5

3

3,46 3,671,93

81,25 42,05 34,6

0,58

MEISINGER products in practical testing

The result of the surface roughness test shows that the material surface is significantly less rough after polishing with MEISINGER polishers than after polishing with competitor products.

Surface roughness test

The temperature measurement takes place after 1 x 30 seconds of polishing the material test body. MEISINGER products demonstrate more gentle results with the test material than the competitors.

Temperature testWear test

The graph shows the percentage weight loss between the weight of the delivery state and after 4 x 30 seconds of polishing. The MEISINGER product shows a clearly lower level of wear.

Reflection test

The MEISINGER polishers show a significantly better result in the reflection test than the competitor products. The material processed diplays an excellent gloss finish after processing with a MEISINGER polisher.

Ra

MEISINGER(Polishing level 2,e.g. DPO05)

Reflection value / GU (gloss units)

Determination with the reflected beam from material illumination Determination of the mean roughness (Ra) with profile analysis of the material surface

MEISINGER(Polishing level 3, e.g. 9749F)

MEISINGER(e.g. DPO06)

Competitor 1

Competitor 1

Competitor 2

Competitor 2 Competitor 1 Competitor 2

Temp. / °C after 30 sec.

MEISINGER(Shape: pointed, e.g. DPO05)

Competitor 1 Competitor 2

Test material: lithium disilicate ceramic

The higher the GU value, the better the reflection and the polished finish.

Weight loss in %

17

Ra

0,1

0,2

0,4

0,5

0,6

0,3

0,26 0,52 0,49

20,0

30,0

40,0

34,62 43,72 35,85

20,0

60,0

40,0

100,0

80,0

75,65 61,1 57,4

Temperature test

The temperature measurement takes place after 1 x 30 seconds of polishing the material test body. With 34.62 degrees, the MEISINGER pro-ducts show a very good and more gentle result than the competitor products.

The material surface after polishing with MEISINGER instruments shows a significantly better result than with competitor products.

Source: data on file (2013)

Surface roughness test

MEISINGER(Polishing level 2,e.g. DCA11)

The experimentAim:To evaluate the performance of two different ceramic test specimens with different polishing systems.

Conditions:• Unified sample preparation using a grinding wheel.• The duration of polishing is 30 seconds per polishing level.• Polishing is performed with a rotary speed of 10.000 rpm• Polishing is performed without water or spray cooling.• After polishing, the test specimens are rinsed with clear tap water and dried with compressed air.

Result:All results represent the respective calculated mean value for the instrument tested. In comparison with the competitors, the MEISINGER products boast advantages across the board and take 1st place in all categories!

Reflection test

In the reflection test, the MEISINGER polishers are clearly in 1st place with an outstanding result and leave the competitors way behind.

Determination with the reflected beam from material illumination

Competitor 1

Competitor 1

Competitor 2

Competitor 2

Temp. / °C after 30 sec.

MEISINGER(Shape: Pointed,e.g. DCA04)

Test material: zirconium oxide ceramic

Reflection value / GU (gloss units)

MEISINGER(Polishing level 2,e.g. DCA10)

Competitor 1 Competitor 2

The higher the GU value, the better the reflection and the polished finish.

Meisinger USA. L.L.C.

10200 E. Easter AvenueCentennial, Colorado 80112 | USA Phone: +1 (303) 268-5400Toll free: +1 (866) 634-7464Fax: +1 (303) 268-5407E-Mail: [email protected]: www.meisingerusa.com

Hager & Meisinger GmbH

Hansemannstr. 1041468 Neuss | GermanyPhone: +49 2131 2012-0Fax: +49 2131 2012-222E-Mail: [email protected]: www.meisinger.de

85BR

CA

DC

AM

E -

101

3

Date post:	24-Sep-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

CAD / CAM- POLISHING SYSTEMS...1 LUSTER® for Zirconia 2-3 ®LUSTER for e.max® 4-5 LUSTER® for...

Documents