of 73
7/28/2019 CAD NOTE
1/73
Job Name 1. CAD in General.Hours
Objectives
1.Understanding the CAD Concept
2.Consists of CAD displayed monitor
3.Understanding the Command words
Instruments
and ToolsMaterials Specification Quantity Safety and Caution
PC (window7) CAD
Software
Pentium .
Cad 2006~2010
CAD (Computer Aided Design or Computer Aided Drafting) is application for2D and 3D
design and drafting,CAD programs to run on personal computers, in earlier releases.
CAD used primitive entities such as lines, poly lines, circles, arcs, and text, as the foundation for
more complex objects. Since the mid-1990s, CAD has supported custom objects through
its includes a full set of basic Solid modeling and 3D tools.
CAD is used in the design of tools and machinery and in the drafting and design of all types of
buildings, from small residential types to the largest commercial and industrial structures.
Procedure :
1. Start from dialogue box.2. Consists of CAD Monitor3. Start command words4. Command words collection
http://en.wikipedia.org/wiki/Computer-aided_designhttp://en.wikipedia.org/wiki/Software_applicationhttp://en.wikipedia.org/wiki/2d_computer_graphicshttp://en.wikipedia.org/wiki/3d_computer_graphicshttp://en.wikipedia.org/wiki/Designhttp://en.wikipedia.org/wiki/Technical_drawinghttp://en.wikipedia.org/wiki/Personal_computerhttp://en.wikipedia.org/wiki/Personal_computerhttp://en.wikipedia.org/wiki/Technical_drawinghttp://en.wikipedia.org/wiki/Designhttp://en.wikipedia.org/wiki/3d_computer_graphicshttp://en.wikipedia.org/wiki/2d_computer_graphicshttp://en.wikipedia.org/wiki/Software_applicationhttp://en.wikipedia.org/wiki/Computer-aided_design7/28/2019 CAD NOTE
2/731
1. Start from dialogue box.Use a Wizard Use a Template Start from Scratch Opening a drawing Instructions
2. Consists of CAD displayed monitor(1)Operation method of Commands
1. Pull down Menu 2. Tool Bar (Draw & Modify icon) 3. Command Line
7/28/2019 CAD NOTE
3/732
3. Start command wordsCmmand word Input by key
Board
Seek to pull
down menu
Option Standard tool bar,
note
New New(N) File - New
Open open Fiile - Open
Save save File - Save *dwg(drawing)
working draw
Save as save as File Save As Another name
Quit quit File Exit Yes, no
Limits(indicate
- draw size)
limits Format Limits
Erase Erase(E) Modify Erase
Zoom Zoom(Z) View Zoom All(A)
Window(W)
Previous(P)
Dynamic(D)
Redraw Redraw(R) View Redraw
Undo Undo(U) Edit Undo
Save time Save time Input minute
4. Command words collection (Draw and Modify)1) Draw commands
Command
words
Icon and Explanation options
Line
(L)
Draw a straight line Close Start from Present point
Undo
Cancel before draw line
1. Coordinate systemX,Y
2. Relative system@X,Y
3. Polar coordinatesystem @X,Y
7/28/2019 CAD NOTE
4/733
Circle
(C)
Draw a Circle by
various method
P.D.MDraw -
Circle
Center , Radius
Center , Diameter
2P : Specify 2 points circle
3P : Specify 3 points circle
TTR : Tan Tan Radius
XLine
(XL)
Drawing both direction of
endless extension line
Hor
Drawing for Horizontal
direction of Endless extension
line
Ver Vertical direction
Ang Indicated angle
Bisect Bisect to indicated angleOffset Distance over 2 lines
Zoom
Adjust the display. OFF
All
Snap [F9]
Center Indicated move to center
DynamicEnlarge, contract with view
box, pocus move with PAN
Extents Disregard of limits, largest
PreviousScale Enlarged , contract
Window Enlarged in box
Grid [F7] ON
Ortho [F8]
OFF
Snap
Aspect
Osnap
Contract words of Object Snap, Command word of Seek for correct point,
Shift+ Right button of Mouse
7/28/2019 CAD NOTE
5/734
Arc3 Points : Start center end, angle, length Start end angle,
direction, radius, Center start end, angle, length
Hatch Type & pattern angle & scale, hatch origin boundary
ELlipseUnder object Front Back Arc Disjoint Hatch, block,
Rec. p-line
POLygon Edge
Spline Object, close, fit T.
Polyline (pline, PL) Option(arc, half, length, undo, width)
Multiline (mline, ML) Justification, scale, style
2) Modify commands
Offset Through PDM- Modify- Offset
TRim Fence, crossing, edge Project, erase, undo
COpy Multiple
Move Sel. Obj. specify p.
ROtate Reference
SCale Sel. Obj. p. scale factor
ARrayRectangular
Polar
7/28/2019 CAD NOTE
6/735
MIrrorDelete source object ?
[Yes/No] 0, 1typing Y is delet
Fillet PolylinePline, Radius
Chamfer
Radius Distance, angle, method,
multiple, undoTrim
Polyline
Explode
Cant Letters Exp : Lengthen command
2mm extended outside
*Adapt for center line
Disjoint Hatch, block,
Rec. p-line
ElaseFirst select object, next
erase
LengthenDelta, percent, total,
dynamic
BreakSel. Obj. specify 2-nd
Point
Pedit(region) Option : close, Join, width, edit vertex, fit, spline, decurve, ltype gen, undo
MVSETUPMvsetup N(no, model) M(meter) 1(Scale) 297(width) 210(height)
(ex. A4 drawing sheet size)
* Full down menu Tools Options : Control the monitor display elements.
7/28/2019 CAD NOTE
7/736
1. CAD in General.Hours
Requirement :
- Understanding of command 3 methods & Functions :
1. Pull down Menu 2. Tool Bar (Draw & Modify icon) 3. Command Line
- Use other items :
Start from dialogue box, Consists of CAD Monitor, Start command words, Command
words collection.
7/28/2019 CAD NOTE
8/737
Job Name 2. Draw square and triangleHours
Objectives1.Understanding the CAD Concept
2.Understanding the Command words
Instruments
and ToolsMaterials Specification Quantity Safety and Caution
PC CAD
Software
Pentium .
Cad 2006~2010
1. 3method of Commands
2. 3 system of valuesa) Coordinate system (absolute) X, Y b) Relative system @X, Y c)
b) Polar coordinate system @X, Y
7/28/2019 CAD NOTE
9/738
(2) Relative system @X, Y
L 2,2 @ 4, 0 @ 0, 4 @ -4, 0 C
(3) Polar coordinate system @X, Y