A Report on ISTE Approved
One Week Short Term
Training Program on
“CAD using Creo and CNC Programming”
21-25 November, 2016
Organized By: Department of Mechanical Engineering,
Darshan Institute of Engineering & Technology, Rajkot
Phone: +91-2822-293010 / 11 Fax: +91-2822-293008
Email: [email protected]
1 STTP on CAD using Creo and CNC Programming
Training Report
A One Week Short Term Training Program (STTP) on “CAD using Creo and CNC
Programming” was organized by Department of Mechanical Engineering, Darshan Institute
of Engineering & Technology, Rajkot (Gujarat) managed by Shree G. N. Patel Educational &
Charitable Trust during 21 – 25 November, 2016. 24 faculties and PG students of various
engineering colleges across Gujarat participated in this training program.
On 21st of November the training program was officially inaugurated by Mr. Ankur
Khambhaita, Director of Anil Mechatronix Pvt. Ltd., Rajkot and Mr. Vimal Dhrangdharia,
Director, CAD Centre, Rajkot. The welcome speech was delivered by Dr. R. G. Dhamsaniya,
the Principal of Darshan Institute of Engineering & Technology and Patron of STTP.
Mr. Ankur Khambhaita explained the concept of M-OUT to increase the productivity to
sustain in this era of competition and to increase global acceptability of Made in India
Products; he concluded his speech with a message “Ask Questions”. The Managing
Chairman & Principal of Darshan Institute of Engineering & Technology; Dr. R. G.
Dhamsaniya explained the various activities of the institute and future plans of the trust to
improve engineering education in saurashtra region. Dr. A. J. Makadia, Head of Department
of Mechanical Engineering explained various Lab facilities of departments as well gave
reasons behind choosing Creo as a tool for training program. Respected dignitaries were
invited to deliver their wisdom words on various subjects.
Finally the vote of thanks was given by Mr. M. V. Sanghani, Principal of Darshan Institute of
Engineering & Technology for Diploma Studies. The responsibility of anchoring was carried
out by Mr. Ankur Tank during the day of inauguration.
The valedictory function was held on 25th of November and it was headed by Chief Guest Mr.
Grinij Haria, Managing Director, Impetus Turnomatics, Rajkot. He delivered a beautiful
speech with a message “Keep Learning, Keep sharing”.
All the working committees performed their function with full devotion and sincerity. Mr.
Vimal Limbasiya and Mr. Sunil Janiyani headed the Press Committee which designed the
brochure as well successfully distributed it. Mr. Jigar Vaghela headed the Stage and
Decoration Committee which decorated the Auditorium as well arranged for the Banners in
the Auditorium and Campus. Mr. Darshit Dadhaniya and Mr. Khodaji Padsumbiya headed
the Catering Committee which looked after the breakfast, lunch and evening tea in a fine
manner. Mr. Mukesh Vekaria headed the Welcome committee and looked after the grand
welcome of all the guests and delegates to the training program. Mr. Mayur Kasundra & Mr.
Sagar Kanjiya jointly headed the Finance Committee which kept details about the
registration of the training program.
The report will not be complete without mentioning the names of other faculties’ viz. Mr.
Ketan Agola, Mr. Ankur Tank, Mr. Karan Santoki, Mr. Jainik Makwana, Mr. Prakash Parajiya
and Mrs. Mital Vagadiya. We also thankful to Computer Department for providing untiring IT
support. We extend our cordial thanks to Hiteshbhai, kantilal, Savjibhai and Mansukhbhai for
2 STTP on CAD using Creo and CNC Programming
standing there in need of hours. And last but not least we thanks Mr. Mukesh, Mr. Manoj,
Mr. Sanjay who helped with full strength for the successful completion of this training
Program.
The training program can be declared as a success as far as the feedback of students and
faculties are considered.
“The Training Program gave us ample knowledge and a direction in which Design should
be correlated with technology. This will help us become a successful Designer”, Mr.
Hemang Parekh, Faculty participant from GP, Rajkot.
"The training program was organized and handle by young generation. Speaker was quite
young. Truly appreciable", Mr. Rupeshkumar Patel, Faculty participant from GEC, Rajkot.
We once again thank the Department of Mechanical Engineering for organizing such a
Wonderful training program.
Patron:
Dr. R. G. Dhamsaniya
Chairman & Principal,
Darshan institute of Engineering & Technology, Rajkot.
3 STTP on CAD using Creo and CNC Programming
Disclaimer Development of this document was supported by the Darshan Institute of Engineering &Technology Rajkot, Gujarat, India.
PHOTO CREDITS Hiren Khakhi, J. U. Rathod, Rutvik Vyas, Ankur Tank and Karan Santoki. COPYRIGHT Darshan Institute of Engineering &Technology, Rajkot 2016 Department of Mechanical Engineering, Gujarat, India
Email: [email protected]
4 STTP on CAD using Creo and CNC Programming
About Institute
Established in 2009, by Shree G. N. Patel Education &Charitable Trust, Darshan Institute of
Engineering & Technology (DIET) is a leading institute offering undergraduate, graduate and
post graduate programs in engineering. The Institute is affiliated to the Gujarat
Technological University and approved by the AICTE, New Delhi.
DIET is managed by technical experienced & well qualified management team, under
leadership of Prof. R. G. Dhamsaniya. From its inception, the college has grown steadily and
is imparting quality technical education. The Institute has well experienced, highly qualified
and dedicated faculty for committed education. DIET is Located in peaceful and sylvan
surroundings, about 19 km from Rajkot, Gujarat, India.
About Department of Mechanical Engineering
The department of Mechanical Engineering offers Diploma & Degree course in Mechanical
Engineering and Post Graduate programs in Thermal Engineering. The department has state
of the art well equipped laboratories and one of the best computing facilities in the region.
Department of Mechanical Engineering at DIET has flourished to a great extent due to their
experienced faculties from diversified fields, optimal faculty to student ratio and enthusiastic
students. Our initiatives are aimed to transform mechanical engineering education and build
careers of our students. We give equal emphasis on fundamental studies, practical exposure
and industrial orientation.
The students also carry out their projects at the leading industries which give them
exposures to live industry problems/activities. Our students are proving to be better
engineers not only in industries but also in the field of research.
5 STTP on CAD using Creo and CNC Programming
About STTP
Design, Manufacturing, and Product Development is the complete set of activities needed to
bring new technologies and services to the marketplace. This training is designed to provide
practical tools necessary to transform the product ideas of Entrepreneurs into a marketable
and commercially viable product.
Product designers and engineers are required to have complete knowledge of developing a
product design virtually. CREO is a complete suite of concept design, modeling, simulation
and analysis software from PTC. The programme objective is to provide hands on experience
in modeling, finite element analysis and part programming using CREO software. The course
shall be useful to Mechanical, Production and Allied engineering branches.
6 STTP on CAD using Creo and CNC Programming
Why Creo?
Creo runs on Microsoft Windows and provides apps for 3D CAD parametric feature solid
modeling, 3D direct modeling, 2D orthographic views, Finite Element Analysis and
simulation, schematic design, technical illustrations, and viewing and visualization.
PTC Creo 2.0 makes it possible to use the advantages of both methods, parametric and
direct modelling paradigms without being subject to their respective limitations. Late stage
design changes are unpredictable and using flexible modelling is the trump card as this
allows us to maintain the design intent within model and hence the intelligence of the
models is not lost and the parametric process is continuous and consistent. The result in
"normal" everyday design is a boost to innovation by adding more variants, i.e. more
possibilities can be evaluated quickly and easily.
Course Content
Solid Modeling
Advanced Solid Modeling
Assembly of Parts
Part Drawing and Detailing
Structural Analysis
Programming with CNC turning center (Jobber XL).
7 STTP on CAD using Creo and CNC Programming
About Organizing Committee
PATRON
Dr. R. G. Dhamsaniya Chairman & Principal, Darshan Institute of Engineering & Technology, Rajkot
CONVENER
Dr. A. J. Makadia
Head of Department, Department of Mechanical Engineering,
Darshan Institute of Engineering & Technology, Rajkot
COORDIANTORS
Mr. V. G. Limbasiya Mr. M. V. Vekaria Mr. S. G. Janiyani Assistant Professors, Department of Mechanical Engineering,
Darshan Institute of Engineering & Technology, Rajkot
8 STTP on CAD using Creo and CNC Programming
Schedule of Program
9 STTP on CAD using Creo and CNC Programming
About Expert
1. Mr. Asif Makwana
Senior Application Engineer
Bluechip infocorp Pvt. Ltd., Rajkot
2. Mr. Nilkanth Raichura
Senior Application Engineer
Bluechip infocorp Pvt. Ltd., Rajkot
3. Mr. Nikhil Parmar
Senior Engineer
ACE Micromatics, Rajkot
4. Mr. Vimal Limbasiya
Assistant Professor
Darshan Institute of Engineering and Technology, Rajkot
5. Mr. Sunil Janiyani
Assistant Professor
Darshan Institute of Engineering and Technology, Rajkot
6. Mr. Mukesh Vekaria
Assistant Professor
Darshan Institute of Engineering and Technology, Rajkot
7. Mr. Jigar Vaghela
Assistant Professor
Darshan Institute of Engineering and Technology, Rajkot
10 STTP on CAD using Creo and CNC Programming
List of Participants
Sr No Full Name Organization
1 Vishwaskumar Prafulbhai Nakum DDU, Nadiad
2 Hitesh Chhaganbhai Jakharia GP, Rajkot
3 Birenkumar Bharatbhai Desai NSIT, Jetalpur
4 Anand M. Gujarati R.K. University, Rajkot
5 Kapil Hasmukhkumar Pandya R.K. University, Rajkot
6 Bhavdip Jayantilal Bharadia R.K. University, Rajkot
7 Hardik Dineshchandra Kotak GP, Rajkot
8 Hemang Jitendra Parekh GP, Rajkot
9 Bhautik Ramnikbhai Pabani NSIT, Jetalpur
10 Rupeshkumar L. Patel GEC, Rajkot
11 Jayeshkumar B. Galchar GP, Rajkot
12 Bhavin N Bhimani Marwadi, Rajkot
13 Bhavik M. Vaghasia Marwadi, Rajkot
14 Kalpesh Ahya VVP, Rajkot
15 Devedrakumar Jayantilal Marsonia GEC, Rajkot
16 Jaydeep Kalidas Dadhaniya GEC, Rajkot
17 Manjuben Kesav Khunti GEC, Rajkot
18 Nilesh Ponkia DIETDS, Rajkot
19 Ajay Bhimani DIETDS, Rajkot
20 Jainik Makwana DIET, Rajkot
21 Karan Santoki DIET, Rajkot
22 Jigar Vaghela DIET, Rajkot
23 Sunil Janiyani DIET, Rajkot
24 Mukesh Vekaria DIET, Rajkot
11 STTP on CAD using Creo and CNC Programming
One week short term training program on ‘CAD using Creo and CNC Programming' was arranged by Department of Mechanical Engineering at Darshan Institute of Engineering and Technology on 21st
to 25th November, 2016
Registration before the Inauguration
12 STTP on CAD using Creo and CNC Programming
Anchoring and event management by Mr. Ankur Tank, Assistant professor, Department of
Mechanical Engineering, Darshan Institute of Engineering and Technology
Delegates in the seminar room for inauguration function
13 STTP on CAD using Creo and CNC Programming
Felicitation of Mr. Vimal Dhrangdharia, Director CAD Center by Dr. A. J. Makadia, Head of
Mechanical Department of Darshan Institute of Engineering and Technology
Training program was inaugurated by Chief guest Mr. Ankur Khambhaita, Director of Anil
Mechatronix Pvt. Ltd., Rajkot by lamp lighting
14 STTP on CAD using Creo and CNC Programming
Welcome speech was delivered by Dr. R.G. Dhamsaniya, Chairman and Principal of Darshan Institute
of Engineering and Technology and Patron of the event
Brief information related to STTP was delivered by Dr. A. J. Makadia, Head of Mechanical
Engineering department and Convener of the event
15 STTP on CAD using Creo and CNC Programming
Mr. Ankur Khambhaita, Director of Anil Mechatronix Pvt. Ltd., delivered keynotes and explain
importance of technology in industries
Participants in the CAD laboratory for session
16 STTP on CAD using Creo and CNC Programming
Mr. Vimal Limbasiya, Assistant Professor, Darshan Institute of Engineering and Technology, Rajkot,
delivered session to participants
Participants in the CAD laboratory for session
17 STTP on CAD using Creo and CNC Programming
Participant doing exercises given by Mr. Vimal Limbasiya
Participant doing exercises given by Mr. Sunil Janiyani
18 STTP on CAD using Creo and CNC Programming
Mr. Sunil Janiyani solving doubts of participants
Mr. Asif Makwana, Application Engineer, Bluechip Infocorp Pvt. Ltd., delivered session to
participants about assembly and mechanism simulation in Creo
19 STTP on CAD using Creo and CNC Programming
Felicitation of Mr. Asif Makwana by Mr. Vimal Limbasiya and Mr. Sunil Janiyani
Mr. Nilkanth Raichura, Application Engineer, Bluechip Infocorp Pvt. Ltd., delivered session to
participants about FEA in Creo
20 STTP on CAD using Creo and CNC Programming
Mr. Jigar Vaghela delivered session to participants about Creo Manufacturing
Mr. Jigar Vaghela solving doubts of participants
21 STTP on CAD using Creo and CNC Programming
Mr. Jigar Vaghela and Mr. Karan Santoki Discussed on problem
Mr. Maulin solanki delivered session to participants about Manual Part Programming
22 STTP on CAD using Creo and CNC Programming
Mr. Hozef Gandhi delivered practical session of measurement instrument used industries to
participants
Mr. Mukesh Vekaria delivered practical session of CNC programming to participants
23 STTP on CAD using Creo and CNC Programming
Delegates in the auditorium for valedictory function
Chief guest for valedictory function Mr. Grinij Haria, Technical Director, Impetus Ternomatics
delivered Key Note address and explained importance of software in core industries
24 STTP on CAD using Creo and CNC Programming
Dr. R. G. Dhamsaniya address thank vote to participant
Mr. Hemang Parekh, Participant, Short term training program, given feedback about training
program
25 STTP on CAD using Creo and CNC Programming
Mr. Rupeshkumrar Patel, Participant, Short term training program, given feedback about training
program
Felicitation of Mr. Grinij Haria by Dr. R. G. Dhamsaniya
26 STTP on CAD using Creo and CNC Programming
Certificate distribution in valedictory function
27 STTP on CAD using Creo and CNC Programming
Committee members of short term training program
Participants and committee members of Short Term Training Program
