Integrate Infor SyteLine with your favorite CAD package
CADLink provides a two-way integration between InforSyteLine and the most popular CAD systems, including:
■ AutoCAD®
■ NX™
■ Inventor®
■ Creo® (formerly Pro/E®)
■ SolidWorks®
By allowing you to automatically exchange routing dataand bill of materials (BOM) items with Infor SyteLine,CADLink eliminates the manual re-entry of data. As aresult, you’ll be able to improve accuracy, increase speed,and build a more efficient engineering and manufacturingprocess.
Streamline your engineeringdesign process
You can reduce rework, minimize scrap,
and work more efficiently when you use
CADLink to establish a fully automated,
two-way connection between Infor
SyteLine® and your CAD system. You’ll
also be able to shrink engineering costs
dramatically—most CADLink customers
achieve payback within six months. The
real-time, two-way channel CADLink
creates between engineering design
and Infor SyteLine takes data directly
from the drawing or model and
integrates that information with Infor
SyteLine.
CADLink for Infor SyteLine
CADLink helps you benefit from the itemdescription standardization already in the InforSyteLine database.
Manufacturing
■ Eliminate engineering clerical work—WithCADLink, your engineering team can focus onwhat they do best. You’ll be able to eliminatedouble and triple data entries becauseengineering information moves simultaneouslybetween your CAD package and your ERPsystem. This frees up engineering staff to domore engineering, reducing your costs.
■ Reduce data entry errors—By unifying thedata entry process, CADLink eliminatessources of error in your ERP system data. Thisis a potentially huge cost savings as a singlemistake in the bill of materials will eventuallylead to ordering errors that result in eitherscrap, excess inventory, or late shipment of parts.
Engineer more efficientlyDon’t waste valuable engineering resources with laborious, error-prone data re-entry tasks. With CADLink, youcan make your preferred CAD platform a natural extension of the Infor SyteLine software you already rely on tooptimize your manufacturing operations. As a result, you’ll be able get more done with less effort and free upengineers to do what they do best.
Improve engineering focus forbetter results
CADLink for Infor SyteLine
Benefits
■ Cut design cost
■ Reduce cycle time
■ Improve information flow
■ Reduce data entry errors
■ Eliminate engineering ERP clerical work
■ Ensure drawing data is consistent
■ Speed design throughput
■ Reduce BOM errors by tying dimensionsdirectly to BOM
Ensure accuracyBy combining Infor SyteLine with CADLink and your preferred CAD package, you’ll be able to ensure a vastlyhigher degree of accuracy between your design process and manufacturing operations. That’s because you’lleliminate error-prone manual steps required to reconcile information between the systems. You’ll also improveyour ability to make plans and execute those plans, because all relevant systems will contain consistent, accurate,up-to-date information. Put all that together and you get faster performance and better results.
Share this :
Copyright © 2015 Infor. All rights reserved. The word and design marks set forth herein are trademarks and/orregistered trademarks of Infor and/or related affiliates and subsidiaries. All other trademarks listed herein arethe property of their respective owners. www.infor.com.641 Avenue of the Americas, New York, NY 10011
INF-1471536-en-US-0715-1
QBuild Software 210 Telson Road, Markham, Ontario. L3R 1E6 www.QBuildSoftware.com Email : [email protected] Tel: +1 905 479 7811