SWISS MADE www.tesabs.ch NEW 04760181 Valid until : 31.12.2013 Prices exclude VAT Version 24 – EN – . The TWIN-CAL calipers are manufactured with a built-in output connectivity feature. Just connect the TLC (TESA-LINK Connector) to the caliper and the other cable end to a compu- ter. All measuring data can be easily retrieved and analysed. – Biggest LCD sreen ever with 11 mm digits – More than 12 000 hours autonomy (3 years) – ABS measuring mode – Unique TWIN & LINK connectivity concept, evolutive output capability with all TWIN-CAL – Round or rectangular depth rod – According to ISO 13385-1 Standard Order number Description Measuring range, Depth Rod Thumb wheel List price € PROMO price € mm in 00530097 TWIN-CAL IP40 150 150 6 – 110 89 00530094 TWIN-CAL IP40 150 150 6 110 89 00530095 TWIN-CAL IP40 200 200 8 137 111 00530096 TWIN-CAL IP40 300 300 12 211 171 04760181 Cable TLC-USB 2 m 109 98 04981001 DATA-Direct – Software for data acquisition, data export as .csv-files 518 440 04981002 STAT-Express – Software for creating measuring protocols, Control board X-R, statistics, measuring reports 1147 975 TLC connectivity concept Calipers TWIN-CAL IP40 150 / 200 / 300 mm, evolutive calipers ! € 89
Transcript
1
SWISS MADE
www.tesabs.ch
NEW
04760181
Valid until : 31.12.2013Prices exclude VAT
Version 24 – EN – .
The TWIN-CAL calipers are manufactured with a built-in output connectivity feature. Just connect the TLC (TESA-LINK Connector) to the caliper and the other cable end to a compu-ter. All measuring data can be easily retrieved and analysed. – Biggest LCD sreen ever with 11 mm digits – More than 12 000 hours autonomy (3 years) – ABS measuring mode – Unique TWIN & LINK connectivity concept, evolutive
output capability with all TWIN-CAL – Round or rectangular depth rod – According to ISO 13385-1 Standard
Order number
Description Measuring range, Depth Rod Thumb wheel
List price €
PROMO price €mm in
00530097 TWIN-CAL IP40 150 150 6 – 110 8900530094 TWIN-CAL IP40 150 150 6 110 8900530095 TWIN-CAL IP40 200 200 8 137 11100530096 TWIN-CAL IP40 300 300 12 211 17104760181 Cable TLC-USB 2 m 109 9804981001 DATA-Direct – Software for data acquisition, data export as .csv-files 518 44004981002 STAT-Express – Software for creating measuring protocols, Control board X-R, statistics,
measuring reports1147 975
TLC connectivity concept
Calipers TWIN-CAL IP40
150 / 200 / 300 mm,
evolutive calipers !
€
89
22
SWISS MADE
NEW
Evolutive Twin-Cal IP67 fully protected caliper, with a built-in output
Valueline IP40 caliper
TESA calipers with dial, vernier and digital readings
TESA Valueline is a brand designed by TESA to meet the demands of clients who are not willing to compromise on TESA know-how and are looking for high quality affordable products. The Swiss technology at the heart of our products also provides additional quality assurance.
Order number
Description Measuring range, Depth Rod Thumb wheel
Electronic Indicators DIgICO With RS232 output, keypad hold and counting sense reverse
TESA DIgICO
Order number
Description Measuring range, mm
Resolution,mm
Max permis-sible error, µm
List price €
PROMO price €
01930230 DIGICO 205 MI 12,5 0,01 20 199 14901930231 DIGICO 305 MI 12,5 0,001 8 332 22901930257 DIGICO 610 MI – With TOL and measuring mode Min, Max 25 0,001 5 479 35901930258 DIGICO 705 MI – For internal measurement 12,5 0,001 4 452 339
Order number
Description Insert,mm
Resolutionmm
Measuring span, mm
Repeatability, µm
List price €
PROMO price €
01810005 TESATAST, Ø 28 mm 12,53 0,01 0,8 3 104 8301810010 TESATAST, Ø 38 mm 12.53 0,002 0.2 1 136 109S18001695 TESATAST, Ø 38 mm 12,53 0,001 0,2 1 144 11501811001 SWISSTAST, Ø 38 mm 12,53 0,002 0,2 1 149 119213 COMPAC Ø 27 mm 18 0,01 1,5 3 153 122212gl COMPAC Ø 40 mm 36 0,01 3 3 236 189215g COMPAC Ø 40 mm 18 0,002 0,6 1,5 208 16601639053 Magnetic articulated arm. Extended 330 mm range, with dovetail and 8 mm diameter clamp with fine adjustment 497 40301639054 Case with Interapid magnetic articulated arm 01639023 and TESATAST S18001695 454 368
Order number
Description Dial diamter,mm
Measuring range, mm
Resolution,mm
Reading, mm
Repeatability, µm
List price €
PROMO price €
353 COMPAC dial gauge with anti-shock movement 40 5 0,01 0 ÷ 25 ÷ 50 3 144 115
532 COMPAC dial gauge with anti-shock movement 58 10 0,01 0 ÷ 50 ÷ 100 3 137 110
Lever-type indicators Insensitive to magnetic fieldsTESATAST lever-type with conti-nuous clockwise pointer rotation COMPAC lever-type with 2-way pointer rotation and unique extended measuring span up to 3 mm
From
From
*Measuring instrument and support delivered separately
€
149
€
45€
110€
115
€
83€*
403€
368
5SWISS MADE
NEW
00760061 00760075 00760082 00760094
ø6
ø3
55 55
ø14
ø6
2
ø6
4
ø2
55
ø6
Certificat d’étalonnageKalibrierschein
Certificate of Calibration
Autonomous and multipurpose instruments that will become the Reference in your workshop!TESA Height Gauges enable you to measure numerous features such as heights, grooves, ribs, bores or shafts in an easy, quick and very accurate way.
TESA Height gauges
Order number
Description Measuring, mm
Max. permissible error, µm
List price €
PROMO price €
00730043 TESA-HITE 400 415 (2,5 + 4 • L) µm, L in m 3988 319000730044 TESA-HITE 700 715 (2,5 + 4 • L) µm, L in m 4614 369000730059 TESA-HITE Magna 700 715 8 3290 263200730034 MICRO-HITE 600 615 (2 + 3 • L) µm, L in m 5940 499000730064 MICRO-HITE plus M 600 615 (1,9 + 1,5 • L ) µm, L in m 5702 479000760163 MICRO-HITE panel with printer 952 80000760221 MICRO-HITE plus M panel without printer 894 70000760232 Small set of inserts for TESA height gauges.
Set composition: 00760061, 00760075, 00760082, 00760094 523 424
Measurement of 5 mm diameter Measurement of the vertical depth of a shoulder
Measurement of a deep groove Highest point of an intersecting line
*Price with panel
€
3690
€
3190€
2632
€*
5790
€
424
€*
5490
€
800
€
700
6
NEWNEW
Order number
Description Measuring range
Limits of error
Dimensions and weight
List price €
PROMO price €
05330203 CLINOBEVEL1 USB
±45° < 1 Arcmin + 1 Digit
100 x 75 x 30 mm 400 g
1342 1141
Supplied with CLINOSOFT software and USB cable to computer
Measurement of inclination TESA ClinoBevel 1 USB is a small and convenient inclination measuring instrument, with ±45° measuring range. Thanks to its 4 measuring bases, the complete 360° range can be covered. TESA Clinosoft software (included) enables easy recording of measuring data on a computer.
Clinobevel1 USB
Inductive Probes and electronic interfaceswhen sub-micron precision and productivity matter…BPX electronic interface manages and synchronizes connected inductive probes for static and dynamic mea-surements. Real-time display of the results is done by using the TIS software (included), which also enables data acquisition in .csv file format. Up to 64 probes can be managed by USB serialisation of several BPX interfaces. For simple configurations TESATRONIC TT allows instant display of the probe values.
Order number
Description Number of probe inputs
Display Dimensions, mm (L x P x H)
Liste price €
PROMO Price €
05030010* BPX probe interface boxTIS software included
4 By using TIS software
172 x 155 x 55 – 0,85 kg
907 726
04430008 TESATRONIC TT 10 Portable probe display
1 Digital and analogue
255 x 235 x 120 – 1,1 kg
1127 924
* Delivery contents : BPX, CD with driver and TIS software, USB cable, Power supply with EU and US cable, User Manual
03230054 GTL 222 Measurement activation by pressure
± 1,5 0, 2 +2, 4 x L2
0, 2 +0, 8 x L
0,015 411 329
Portable easy-to-use Roughness TesterUnique vertical measuring range of 400 μm and 1 nanometre resolution within the whole measuring range ! – Roughness parameters Ra, Rq, Rt, Rz,, Rc, Rsm, Pt, Rmr, Pmr, Rpc, PPc,
Rmax, R, Rx, AR – Graphic LCD display 2’’: roughness profile, portance curve – Cut-off lengths 0,25, 0,80, 2,50 mm – Number of Cut-offs from 1 to 5 – ISO 3274 precision, class 1 – Units in metric and inch – USB connection to PC – Dimensions:
122 x 60 x 62 mm – 10 languages
RUGOSURF 20 (No. 06930013) delivered with: SB10 probe (R=5 µm, 90°), roughness standard Ra = 2,97 µm, 8 mm-diame-ter positioning pin, mounted battery, charger with EU/US adaptor, instruction manual, transport case.
Order number
Description Liste Price €
PROMO Price €
06930013* RUGOSURF 20 1967 1574
06960056 100 mm probe extension, Ø 11 mm 398 338
06960035 400 x 250 mm granite table for Rugosurf 20 or 10G
990 842
Accessories04760069 USB Cable RUGOSURF 20
To PC (USB A – micro USB) 40
06960066 Roughness standard Ra = 1 µm 657
06960065 Roughness standard Ra = 0,5 µm 756
* Measuring support and 100 mm probe extension not included
TESA RUgOSURF 20
Compact and lightweight electronic inclinometer±45° measuring range – > 5 Arcsec (0,025 mm/m) resolution – Robust and shop-floor proof: anodised and hardened aluminium housing – Four machined faces allowing 360° measurement – Three simple operating key – High contrast LCD display – battery powered 1 x 1,5 V AA Alkaline battery – Communi-cation protocol: RS485: 9600 Baud / 7 Bit / 2 Stop Bit / asynchron / no parity.
€
1141
€
329
€
726
€*
1574
€
261
77
SWISS MADE
Exclusive Slewing System
by TESA
TESA-SCAN The metrological solution for round parts
A complete range to answer all your need !
TESA-REFLEX Scan
Pro-Measure
Make complex measurements simple: – Main dimensions measured without prior pro-
gramming, with a simple click – Intelligent automatic recognition of your parts/
programs
The reference for the workshop or laboratory: – More than 150 measureable features to control
the most demanding geometrical tolerances – Unique slewing system to measure all types of
thread or complex turned parts
Order number
Description Software Measuring range Ø x L, in mm
Slewing system for thread measurement
Maximum permissible error, in µm
02430000 TESA-SCAN 25 Pro-Measure 25 x 200 – Ø = 1,5 + D/100 µm, D in mmL = 5 + L/100 µm, L in mm
02430010 TESA-SCAN 50 Pro-Measure 50 x 275 – Ø = 2 + D/100 µm, D in mmL = 5 + L/100 µm, L in mm
02430030 TESA-SCAN 50 CE+ Pro-Measure 50 x 275 30° Ø = 2 + D/100 µm, D in mmL = 5 + L/100 µm, L in mm
02430040 TESA-SCAN 50+ Pro-Measure 50 x 500 15° Ø = 2 + D/100 µm, D in mmL = 5 + L/100 µm, L in mm
02430050 TESA-SCAN 80 Pro-Measure 80 x 500 – Ø = 2 + D/100 µm, D in mmL = 8 + L/100 µm, L in mm
02430060 TESA-SCAN 80+ Pro-Measure 80 x 500 10° Ø = 2 + D/100 µm, D in mmL = 8 + L/100 µm, L in mm
02430090 TESA-SCAN 52 REFLEX TESA-REFLEX Scan 52 x 300 - Ø = 2 + D/100 µm, D in mmL = 5 + L/100 µm, L in mm
02430091 TESA-SCAN 52 REFLEX Rotary headstock
TESA-REFLEX Scan 52 x 300 - Ø = 2 + D/100 µm, D in mmL = 5 + L/100 µm, L in mm
![Evolutive Algorithm for Spectral Handoff Prediction in ... · Evolutive algorithm for spectral handoff prediction 675 feedback analytic hierarchy process algorithm (FFAHP) [14]. The](https://static.documents.pub/doc/80x56/5b36da147f8b9ab9068b9541/evolutive-algorithm-for-spectral-handoff-prediction-in-evolutive-algorithm.jpg)
