Date post: | 30-Mar-2018 |
Category: |
Documents |
Upload: | truongphuc |
View: | 221 times |
Download: | 7 times |
CALORPLAST Liquid / Liquid Polymer Heat Exchanger
www.calorplast.de
where outstanding corrosion resis-tance matters where reliability matters where energy efficiency matters
CALORPLAST WÄRMETECHNIK GmbH
www.calorplast.de
Siempelkampstraße 94 47803 Krefeld Germany
Phone: +49 (0)2151-8777-0 Fax: +49 (0)2151-8777-33 E-mail: [email protected]
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
101 Lindenwood Drive, Suite 225
Malvern • Pennsylvania 19355
T 484.875.3068 • F 484.875.9273
CALORPLAST Liquid / LiquidPolymer Heat Exchanger
High cooling and heating efficiency Flexible and compact design Fully corrosion resistant Best in class flow efficiency 30 years of experience
Closed loop external heat exchanger for free flowing liquids, clean or low contaminated
For heating or cooling of fluids or condensation of vapors
Compact and completely welded design
High heat transfer rates
Use of thin walled tubes that minimizes the adhesion of particles
1 to 20 m2 heat transfer surface (per column)
Materials: PE-RT, PVDF
Operation temperatures: -30°C (-22°F) to 140°C (284°F) (material dependent)
Operation pressure: 3 to 16 bar (depending on the material chosen and the operation temperature)
Pressure drop: 50 mbar (approx.)
Tube Plate Heat Exchanger
APPLICATIONS BENEFITS
Closed loop external heat exchanger for heating, cooling, condensation or evaporation of corrosive, purified fluids
For heating or cooling of fluids or condensation of vapors
Customized design
1 to 20 m2 heat transfer surface
Materials: PE-RT, PVDF or PFA*
Shell and Tube Heat Exchanger
Technical Data
www.calorplast.de
*Limited designs
High cooling and heating efficiency Flexible and compact design Fully corrosion resistant Best in class flow efficiency 30 years of experience
Closed loop external heat exchanger for free flowing liquids, clean or low contaminated
For heating or cooling of fluids or condensation of vapors
Compact and completely welded design
High heat transfer rates
Use of thin walled tubes that minimizes the adhesion of particles
1 to 20 m2 heat transfer surface (per column)
Materials: PE-RT, PVDF
Operation temperatures: -30°C (-22°F) to 140°C (284°F) (material dependent)
Operation pressure: 3 to 16 bar (depending on the material chosen and the operation temperature)
Pressure drop: 50 mbar (approx.)
Tube Plate Heat Exchanger
APPLICATIONS BENEFITS
Closed loop external heat exchanger for heating, cooling, condensation or evaporation of corrosive, purified fluids
For heating or cooling of fluids or condensation of vapors
Customized design
1 to 20 m2 heat transfer surface
Materials: PE-RT, PVDF or PFA*
Shell and Tube Heat Exchanger
Technical Data
www.calorplast.de
*Limited designs
High cooling and heating efficiency Flexible and compact design Fully corrosion resistant Best in class flow efficiency 30 years of experience
Closed loop external heat exchanger for free flowing liquids, clean or low contaminated
For heating or cooling of fluids or condensation of vapors
Compact and completely welded design
High heat transfer rates
Use of thin walled tubes that minimizes the adhesion of particles
1 to 20 m2 heat transfer surface (per column)
Materials: PE-RT, PVDF
Operation temperatures: -30°C (-22°F) to 140°C (284°F) (material dependent)
Operation pressure: 3 to 16 bar (depending on the material chosen and the operation temperature)
Pressure drop: 50 mbar (approx.)
Tube Plate Heat Exchanger
APPLICATIONS BENEFITS
Closed loop external heat exchanger for heating, cooling, condensation or evaporation of corrosive, purified fluids
For heating or cooling of fluids or condensation of vapors
Customized design
1 to 20 m2 heat transfer surface
Materials: PE-RT, PVDF or PFA*
Shell and Tube Heat Exchanger
Technical Data
www.calorplast.de
*Limited designs
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
High cooling and heating efficiency Flexible and compact design Fully corrosion resistant Best in class flow efficiency 30 years of experience
Closed loop external heat exchanger for free flowing liquids, clean or low contaminated
For heating or cooling of fluids or condensation of vapors
Compact and completely welded design
High heat transfer rates
Use of thin walled tubes that minimizes the adhesion of particles
1 to 20 m2 heat transfer surface (per column)
Materials: PE-RT, PVDF
Operation temperatures: -30°C (-22°F) to 140°C (284°F) (material dependent)
Operation pressure: 3 to 16 bar (depending on the material chosen and the operation temperature)
Pressure drop: 50 mbar (approx.)
Tube Plate Heat Exchanger
APPLICATIONS BENEFITS
Closed loop external heat exchanger for heating, cooling, condensation or evaporation of corrosive, purified fluids
For heating or cooling of fluids or condensation of vapors
Customized design
1 to 20 m2 heat transfer surface
Materials: PE-RT, PVDF or PFA*
Shell and Tube Heat Exchanger
Technical Data
www.calorplast.de
*Limited designs
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
Your Engineering Plastics Experts
Our experts can provide complete solutions to your � uid handling problems. We are highly knowledgeable about the various types of engineering plastics available, and we can help you determine what materials or products are best suited for your speci� c process. We can manage the project for you, from start to � nish, or we can advise you on certain aspects of your project.
Complete Filtration Systems for Your Plating and Industrial Applications
Specialty Plastics SIEBEC offers Complete Molded Filtration Systems—made with PP or PVDF—featuring superior corrosion resistance for your plating and industrial applications. SIEBEC systems have provided solutions in applications for over 50 years worldwide.
SPP 1
5-005
v03
Our Expert Services Include:
• Product Selection
• Material Selection
• Specifi cation Assistance
• Engineering and Design
• Technical Support
• Plastics Testing
• Consulting Services
• Project Management
• Feasibility Studies
WWW.SPECIALTY-PLASTICS.COM
Reducing Cost of Ownership • Speedchange Assembly in 30 Seconds* • Re-Usable Filter Cartridges Magnetic Drive Pumps • Mechanical Drive Pumps • Vertical Pumps
CARTRIDGES • PUMPS • FILTERS • EDUCTOR NOZZLES(Including high-capacity L-TECH pleated re-usable cartridges)
*Contact us for details.
Four-Point Guarantee*
• Performance• Manufacturing• Satisfaction• Price
REQUEST A QUOTE TODAY.
101 Lindenwood Drive, Suite 225 • Malvern • Pennsylvania 19355T 484.875.3068 • F 484.875.9273 • E [email protected]