Date post: | 02-Jun-2018 |
Category: |
Documents |
Upload: | luissanchezm |
View: | 223 times |
Download: | 0 times |
of 15
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
1/15
2008 Matsushita Electric Industrial Co., Ltd. Allrights reserved. Unauthorized copying and
distribution is a violation of law.
L-RS014150PPL-RS014150EVol. 1
Interchangeable Lens for Digital SLR Camera
ORDER NO. DSC0712043CE
B26
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
2/15
1 INTRODUCTION 3
1.1. INTRODUCTION 3
1.2. IMPORTANT NOTICE 3
2 OPERATING GUIDE 4
2.1. BEFORE USE 4
2.2. CAUTIONS FOR USE 5
2.3. COMPONENTS 6
3 SERVICE FIXTURE & TOOLS 8
3.1. SERVICE FIXTURE AND TOOLS 8
3.2. CLEAN BOX 8
4 SERVICE INFORMATION 9
4.1. INITIAL (DEFAULT) STATUS OF THE LENS UNIT 9
4.2. CLEANING OF THE LENS SURFACE 9
5 DISASSEMBLY AND ASSEMBLY 10
5.1. FLOW CHART 10
5.2. DISASSEMBLY / ASSEMBLY PROCEDURES 11
6 EXPLODED VIEWS 13
6.1. FRAME & CASING SECTION 13
6.2. PACKING PARTS & ACCESSORIES SECTION 14
7 REPLACEMENT PARTS LIST 15
7.1. MECHANICAL REPLACEMENT PARTS LIST 15
CONTENTS Page Page
2
-RS014150PP / L-RS014150E
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
3/15
1 INTRODUCTION
1.1. INTRODUCTION
This service manual contains technical information, which allow service personnel to understand and service this model.
Please place orders using the parts list and not the drawing reference numbers.
If the circuit is changed or modified, the information will be followed by Supplement Service Manual.
1.2. IMPORTANT NOTICE
1. When servicing other than the following part disassembling and/or replacement, the clean box which keeps dustproof
environment is required. (Satisfied clean level: Less than class 10,000 Federal Standard 209D).
2. Due to above reason, this Service Manual does not contain the following information.
a. Disassemble / Assemble procedure for other than the part showing in Fig.S1.
b. Parts list for other than the part showing in Fig.S1.
Fig. S1
3. No adjustment is required when replacing the part mentioned on Fig.S1. But, when tighten the concerned screws, apply proper
torque mentioned on "5 Disassemble / Assemble section".
3
L-RS014150PP / L-RS014150E
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
4/15
2 OPERATING GUIDE
2.1. BEFORE USE
4
-RS014150PP / L-RS014150E
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
5/15
2.2. CAUTIONS FOR USE
5
L-RS014150PP / L-RS014150E
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
6/15
2.3. COMPONENTS
2.3.1. Accessories
6
-RS014150PP / L-RS014150E
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
7/15
2.3.2. Attaching/Detaching the Lens
7
L-RS014150PP / L-RS014150E
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
8/15
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
9/15
4 SERVICE INFORMATION
4.1. INITIAL (DEFAULT) STATUS OF THE LENS UNIT
This lens unit shows the following status when the Lens is detached from the Camera unit.
NOTE:
It also shows the same condition when the Camera turns off although the lens unit is attached.
[1]. ZOOM RING.....................................When the Zoom Ring is rotated, Zoom condition is changing accordingly.[Focal Length :14 - 150 mm [35mm film camera equivalent : 28 - 300mm]
[2]. FOCUS RING ...................................The Focus condition does not changed although Focus ring is rotated.
[3]. FOCUS DISTANCE INDICATOR ....The focus distance indicator does not changed although focus ring is rotated.
[Fixed at fully Infinity position.]
[4]. APERTURE RING ...........................The Aperture condition does not changed although Aperture ring is rotated.
[Fixed at fully open position.]
NOTE:
1. This lens supports contrast AF and the direction detection function.
(Capable cameras as of December 2007:DMC-L10)
2. Useful hint/tips for this unit is available at following URL, and is updated frequently.
http://panasonic.jp/support/global/cs/dsc/
4.2. CLEANING OF THE LENS SURFACE
Define the location of the dirt / dust of the lens first, whether it is outside surface of the lens or not.
If it is outside surface of the lens, order the following procedure in steps.
STEP-1. Blow off the dust certainly with Hand Blower.
STEP-2. Clean and wipe up the Lens surface by using the Lens cleaning Kit (VFK1900BK).
(Read/consult the instruction sheet being included in the Lens cleaning Kit in details.)
9
L-RS014150PP / L-RS014150E
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
10/15
5 DISASSEMBLY AND ASSEMBLY
5.1. FLOW CHART
10
-RS014150PP / L-RS014150E
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
11/15
NOTE:
When Disassembling and Assembling for the Lens
1. To minimize the possibilities of getting the dust/dirt on the
lens surface, keep putting the lens cap other than
necessary case.
2. The parts other than listed in replacement part list are not
allowed to disassemble/assemble.
3. Other than Screw (B), use a Torque Driver (RFKZ0456)
when tighten the screws.
The Torque specification is indicated in each Figure.
As for Screw (B), use a VFK1390.
4. Take care that the dust and dirt are not entered into the
lens. In case of the dust is putted on the lens, blow off them
by airbrush.
5. Do not touch the surface of lens
6. Use lens cleaning KIT (BK) (VFK1900BK).
5.2.1. Removal of the Zoom Rubber Ring--- WHEN ASSEMBLING ----
*.Install the Zoom rubber ring so that the convex part of the
Zoom Ring comes to the Front side. (Subject Side.)
5.2.2. Removal of the Shading Frame
--- WHEN ASSEMBLING ----
*.Tighten the 3 screws (A) in numerical order.
5.2. DISASSEMBLY / ASSEMBLY PROCEDURES
11
L-RS014150PP / L-RS014150E
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
12/15
5.2.3. Removal of the Lens Mount U
--- WHEN DISASSEMBLING / ASSEMBLING ----
*.When removing and installing the "Screw (B)", use a
VFK1390. Otherwise, Lens Mount u may be damaged.
--- WHEN ASSEMBLING ----
*.When assembling, do not reuse screws (D). (Use new one.)
*.Tighten the 4 screws (C) and (D) in numerical order.
5.2.4. Removal of the Decoration Ring
--- WHEN DISASSEMBLING ----
*.Since the Decoration Ring which is stick on Lens Ring Front,
Apply the heating air using Hair dryer.
*.Peel off the Decoration ring by inserting the minus-driver
between the Decoration Ring and Lens Ring Front.
(Be careful not to damage the surface of the lens and/or Lens
Ring Front.)
--- WHEN ASSEMBLING ----
*Do not use the removed (Used) Decoration Ring. Use new
one.
*.Peel off the Decoration Ring from the separator sheet.
*.Stick the Decoration Ring to the Lens Ring Front that concave
part to be toward the "X" direction.
*.Press the Decoration Ring with Name Ring Fixture
(RFKZ0423)
12
-RS014150PP / L-RS014150E
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
13/15
6 EXPLODED VIEWS
6.1. FRAME & CASING SECTION
13
L-RS014150PP / L-RS014150E
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
14/15
6.2. PACKING PARTS & ACCESSORIES SECTION
14
-RS014150PP / L-RS014150E
8/10/2019 Camara Digital Lente Panasonic Dmw Fl360
15/15
7.1. MECHANICAL REPLACEMENT
PARTS LIST
7.1.1. FRAME & CASING SECTION
PARTS LIST
Ref.
No.
Pa rt N o. P ar t N am e & De sc ri pt io n R em ar ks
1 VYF3089 LENS CAP FRONT
2 VGH4974 DECORATION RING
5 VMG1812 ZOOM RUBBER RING
28 VXQ1431 L MOUNT U
29 VDW1480 SHADING FRAME
30 VFC4185 LENS CAP REAR
31 RQLS0355 WEEE LABEL E model only
B30 VHD1868 SCREW
B3 1 X QN 14 +A J3 FN S CR EW
B32 XQN2+A12FN SCREW
B33 XQN2+A12FN SCREW
B34 XQN2+A12FN SCREW
B35 XQN2+AJ5FN SCREW
B3 6 X QN 14 +B 3F NK S CR EW
B3 7 X QN 14 +B 3F NK S CR EW
B3 8 X QN 14 +B 3F NK S CR EW
7.1.2. PACKING PARTS & ACCESSORIES
SECTION PARTS LIST
Ref.
No.
Pa rt N o. P ar t N am e & De sc ri pt io n R em ar ks
(1) VYF3089 LENS CAP FRONT
(30) VFC4185 LENS CAP REAR
51 VPN6561 CUSHION
52 VPN6561 CUSHION
53 VPN6588 PAD
54 VPN6588 PAD
55 VPF1262 LENS BAG (POLYETHYLENE)
57 VQT1K93 OPERATING INSTRUCTIONS
(ENGLISH/CANADIAN FRENCH/
SPANISH)
(PP)
57 VQT1K94 OPERATING INSTRUCTIONS
(ENGLISH/GERMAN/FRENCH/SPANISH/ITALIAN/TRADITION
AL CHINESE/
RUSSIAN)
(E)
58 VPK3414 ACCESSORIE BOX
59 VYC0975 HOOD U
60 VFC4296 LENS STORAGE BAG
61 VPK3404B-KIT INNER CARTON (PP)
61 VPK3404 INNER CARTON (E)
63 VQL1M13 OPERATING LABEL
7 REPLACEMENT PARTS LIST
L-RS014150PP / L-RS014150E