Home > Documents > Cameron - 2000 Cameron Catalog

Cameron - 2000 Cameron Catalog

Date post: 03-Jan-2016
Category:
Author: jahehe2000
View: 909 times
Download: 44 times
Share this document with a friend
Description:
2000 Cameron Catalog
Embed Size (px)
Popular Tags:
of 47 /47
2000 C AMERON C ATALOG MAIN MENU Connect With Cameron CAMSERV Aftermarket Services Drilling Subsea Production Surface Production API Gate Valve And Actuators Cameron Willis Chokes Cameron Controls Cooper Cameron Valves Additional Cameron Resources Click the Cameron Logo on any page to return to the Main Menu
Transcript
  • 2 0 0 0 C A M E R O N C ATA L O G

    M A I N M E N U

    Connect With Cameron

    CAMSERV Aftermarket Services

    Drilling

    Subsea Production

    Surface Production

    API Gate Valve And Actuators

    Cameron Willis Chokes

    Cameron Controls

    Cooper Cameron Valves

    Additional Cameron Resources

    Click the Cameron Logo on any page

    to return to the Main Menu

    Y2K Catalog home page 2/2/00 4:04 PM Page 1

  • 136

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Table of Contents

    CAMSERV Aftermarket Services . . . . 137

    Drilling . . . . . . . . . . . . . . . . . . . . . . . 140

    Subsea Production . . . . . . . . . . . . . . 147

    Surface Production . . . . . . . . . . . . . . 153

    API Gate Valve and Actuators . . . . . 158

    Cameron Willis Chokes . . . . . . . . . . . 162

    Cameron Controls . . . . . . . . . . . . . . . 164

    Cooper Cameron Valves . . . . . . . . . . 166

    Connect With Cameron

    Electronic Information Cameron maintains a comprehensive website atwww.camerondiv.com. Cameron offers more than50,000 pages of information on all product lines:Drilling, Surface, Subsea, Aftermarket, CameronControls, Cameron Willis, and Cooper CameronValves.

    The most powerful tool available to Cameroncustomers via the website is the Transact section.Transact is a secure extranet within the Cameronwebsite available only to Cameron customers.Future Transact features include E-Commercewhich will soon enable authorized customers toplace orders from their desktop. Current sectionswithin Transact are:

    Technical Library - access operation and maintenance manuals, engineering bulletinsand reports, assembly and testing procedures,inspection criteria, technical papers, and experience lists.

    Parts and Pricing - review the list prices ofCameron standard products.

    Training - access fully interactive, dynamicproduct-specific training modules which include installation procedures and servicerequirements.

    Mainframe Access- read product bills of material, verify revision status, check customerproperty, review consigned inventory levels,and much more in the Cameron SAP database.

    Document Ordering System - order freeprinted brochures or download Acrobat .pdffiles to print to your local printer.

    Projects - review project management information such as planning and scheduling, document control, costs expended, statusreports and engineering deliverables.

    Printed Information Cameron maintains a comprehensive library ofsales and marketing brochures and catalogs inprinted format. Customers can utilize one of several alternatives to obtain these materials.

    Internet - customers can access the Cameron Document Ordering System to receive free, printed copies of brochures via the mail or they can email Cameron at [email protected] to request specific product brochures.

    Phone or Fax - customers can receive product brochures by telephoning the Cameron Marketing Communications epartment in Houston at 713-939-2711 or by faxing 713-939-2735.

    Cameron Sales Force - Customers can contact their local Cameron representative who can order brochures to be mailed directlyto them anywhere in the world. Cameronoffers training CDs on many of its products and services. Customers can order these CDs through local sales representatives.

    CD ROMs This catalog, along with other Cameron sales and marketing information, is available on CD ROM. Customers can order the CD catalog via the Internet, phone or fax or through theCameron sales force. In addition, Cameron offers a library of training CD ROMs on many of our products.

    CONNECTC O N N E C TThis catalog offers an introduction to Cameron systems and products. For additional information on prod-ucts in this catalog or products which do not appear on these pages, Cameron has a myriad of additionalresources available to you. Whether you prefer information in electronic or printed format; on the Internetor CD ROM; on your desktop or on your library shelf; Cameron can get you the comprehensive informationyou need quickly.

    Cameron is a name that is unsurpassed

    for quality, dependability and technology

    in the oil and gas industry today. As a

    leader in the industry, Cameron provides

    total system solutions for both drilling

    and production applications.

    But, while other suppliers are content

    to simply supply equipment, Cameron

    provides so much more. Like our world-

    wide network of CAMSERV Service

    Centers. And our comprehensive internet

    site. Our preengineered MOSAIC subsea

    production system. Decades of experi-

    ence. Industry standard products like the

    U BOP. Electronic commerce. Project

    management. Proprietary elastomers

    from Cameron Elastomer Technology.

    Brand names you know and trust -

    Cameron, Willis, W-K-M - to name a few.

    Highly trained service technicians.

    Ongoing research and development

    projects. Award-winning technology.

    The list goes on and on, much more than

    we could possible present in one catalog.

    So, whether you need a single gate

    valve, or an entire system from the BOP

    stack to the controls, put Cameron to

    work for you.

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • 137

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    CAMSERV Aftermarket Services

    Camerons CAMSERV Aftermarket Services program

    has redefined the term oilfield service.

    CAMSERV provides the most comprehensive

    offering of aftermarket products and services in the

    industry today. Each CAMSERV option

    is designed to reduce the Total

    Cost of Ownership and to offer

    unmatched value in service

    after-the-sale. And, when used in

    combination, these options can signifi-

    cantly reduce CAPEX and OPEX costs for

    our customers worldwide.

    CAMSERV begins with a network of service

    centers located in every major oil and gas producing

    region of the world and continues with Camerons

    team of service technicians. In addition, many new

    and innovative programs have been added which

    make CAMSERV the premier aftermarket program in

    the industry.

    CAMWARE Software

    Camerons CAMWARE Asset Management Software

    is designed to track, manage and report on customer

    equipment from acquisition to disposal. CAMWARE

    is available in versions for operators and drilling

    contractors, and for mainframe computers or PCs.

    CAMWARE provides a full history of all serialized

    equipment, including maintenance and performance

    factors. CAMWARE can track a variety of items

    such as next-scheduled service, status of completed

    service jobs, recommended maintenance, well condi-

    tions, well performance, inventory control including

    certificate numbers, document references, part

    numbers and serial numbers. The system can even

    reference a storage location for original documents.

    Through-Life Cost Management (TLC)

    TLC is a comprehensive program to reduce the Total

    Cost of Ownership. TLC Starts at equipment acquisi-

    tion and covers ownership, usage, maintenance and

    finally, disposal. It is truly a cradle to grave

    perspective. Cameron can develop TLC

    programs for anything from annual

    maintenance agreements to global

    alliances. These programs can

    contain any number of CAMSERV options,

    depending on customer needs.

    CAMSERV Advantage Program

    CAMSERV Advantage is an incentive program

    designed to encourage customers to maximize their

    savings by utilizing a full array of CAMSERV service

    options. Due to the complex nature of aftermarket

    service needs, CAMSERV facility managers are autho-

    rized to customize CAMSERV

    Advantage packages

    to meet individual

    customer require-

    ments. CAMSERV

    Advantage incentives

    may include pricing frame

    agreements, volume discounts, consignment

    programs, electronic information interfaces or

    faster turnarounds. Individual CAMSERV Advantage

    options may include:

    Field Services - CAMSERV field service technicians

    are on call 24-hours a day, 7-days a week to handle

    on-site service needs. These people are highly skilled

    in providing installation assistance, making field

    repairs and performing routine, scheduled mainte-

    nance. They also provide technical support and well

    services such as decompletion, recompletion, trim

    changes and installation of safety equipment.

    Customer Equipment Reconditioning - CAMSERV

    Service Centers offer a full range of equipment

    repair services for all types and brands of oilfield

    equipment. In addition to disassembly, inspection,

    re-assembly and testing services, Cameron provides

    machining, welding, heat-treating and other

    re-manufacturing operations. Cameron offers

    reconditioned products in first class, fit for function,

    and working condition performance standards.

    Customer Property Management - Property

    management services can be arranged to extend

    and complement existing warehousing capabilities.

    Services provided include storage/warehousing,

    equipment utilization services, brokering and equip-

    ment buy-back.

    Reconditioned Equipment - Reconditioned drilling

    and production equipment meeting API standards

    is available in a broad range of products including

    blowout preventers, choke manifolds, well-

    heads, gate valves, and Christmas trees.

    Reconditioned equipment can be obtained

    through direct purchase, equipment

    exchange or rental.

    Replacement Parts - CAMSERV Service Centers

    stock replacement parts (new and reconditioned)

    for many Cameron products for immediate delivery.

    Less frequently needed items or parts for older

    equipment can be quickly located through our

    Global Product Search Engine (GPSE). In addition,

    a secure, restricted-access Transact section of the

    Cameron website has been set-up to offer electronic

    ordering of many types of replacement parts.

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • 139

    Legend

    Cameron Geographic Regions

    Western Hemisphere

    Eastern Hemisphere

    Asia Pacific/ Middle East

    Cameron Worldwide Locations

    Service Centers and Manufacturing Plants

    Sales Offices

    I N D I A N

    O C E A N

    P A C I F I C

    O C E A N

    A R C T I C O C E A N

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES138

    Worldwide CAMSERV Service Centers

    Worldwide Presence

    Cameron maintains a worldwide network

    of sales, service and manufacturing facili-

    ties. Each facility is strategically located

    to meet the specific meets of the customers

    in the area.

    Camerons management matrix gives

    customers two groups of people directly

    accountable to their business - one by geo-

    graphic location, another by product line.

    Cameron geographic business units

    include the Western Hemisphere, based in

    Houston, Texas; the Eastern Hemisphere,

    based in London, England; and Asia

    Pacific/Middle East based in Singapore.

    Separate product business units for drilling,

    surface production, subsea production,

    aftermarket services, chokes, and controls

    remain focused on individual product lines.

    P A C I F I C

    O C E A N

    A T L A N T I C

    O C E A N

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Drilling

    Products Overview . . . . . . . . . . . . . . . . . . . . . . . .140

    Drilling Capabilities Overview . . . . . . . . . . . . . . .141

    Surface Drilling Systems . . . . . . . . . . . . . . . . . . . .142

    Cameron BOP Stack . . . . . . . . . . . . . . . . . . . . .142

    Choke Manifold . . . . . . . . . . . . . . . . . . . . . . .142

    BOP Control System . . . . . . . . . . . . . . . . . . . .142

    Subsea Drilling Systems . . . . . . . . . . . . . . . . . . . .143

    Subsea Drilling System Components (Surface)

    Control System . . . . . . . . . . . . . . . . . . . . .143

    Choke System . . . . . . . . . . . . . . . . . . . . . .143

    Riser System . . . . . . . . . . . . . . . . . . . . . . .143

    Subsea Drilling System Components (Subsea)

    Control System . . . . . . . . . . . . . . . . . . . . .143

    Riser System . . . . . . . . . . . . . . . . . . . . . . .143

    Lower Marine Riser Package . . . . . . . . . .143

    BOP Stack . . . . . . . . . . . . . . . . . . . . . . . . .143

    Ram-Type BOPs

    TL BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144

    U BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144

    UM BOP . . . . . . . . . . . . . . . . . . . . . . . . . . . .144

    Annular BOP

    DL Annular BOP . . . . . . . . . . . . . . . . . . . . . . .144

    Rams and Ram Packers

    FlexPacker . . . . . . . . . . . . . . . . . . . . . . . . . . .145

    FlexPacker-NR . . . . . . . . . . . . . . . . . . . . . . . .145

    Dual Bore FlexPacker . . . . . . . . . . . . . . . . . . .145

    VBR-II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

    Inserted Packer for Stripping and Snubbing . .145

    CAMRAM 350 Packer . . . . . . . . . . . . . . . . . .145

    Cameron Elastomer Technology . . . . . . . . . . . . . .145

    Collet Connectors

    Model 70 Collet Connector . . . . . . . . . . . . . . .146

    HC Collet Connector . . . . . . . . . . . . . . . . . . . .146

    DWHC Collet Connector . . . . . . . . . . . . . . . . .146

    Riser Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

    Table of Contents

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

    ecat section pages 1/13/00 5:52 PM Page 1

  • 140

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Products Overview

    Dr i l l ing

    Surface Drilling Systems Subsea Drilling Systems

    Ram-Type BOPs Ram-Type BOPsTL BOPs TL BOPsUM BOPs UM BOPsU BOPs U BOPs

    Rams RamsShearing Bind Rams Shearing Blind RamsDVS Shear Rams DVS Shear RamsSuper Shear Rams Super Shear RamsVBR-II Variable Bore Rams VBR-II Variable Bore RamsFlexPacker Rams FlexPacker RamsDual FlexPacker Rams Dual FlexPacker RamsPipe Rams Pipe Rams

    Ram Packers and Top Seals Ram Packers and Top SealsCAMRAM CAMRAMCAMRAM 350 CAMRAM 350CAMLAST CAMLASTLow Temperature Low TemperatureStripping and Snubbing Stripping and Snubbing

    Annular BOPs Annular BOPsSingle and Double DL Annular BOPs Single and Double DL Annular BOPs

    Connectors ConnectorsFastLock Connectors DWHC Collet ConnectorFastClamp Connectors HC Collet ConnectorsFlangeLock Connectors HCH4 Collet ConnectorsAPI Clamps Model 70 Collet Connector

    Choke Manifold Systems Choke Manifold SystemsHydraulic and Manual Drilling Chokes Hydraulic and Manual Drilling ChokesH2 and H2I Adjustable and Positive Chokes H2 and H2I Adjustable and Positive ChokesHydraulic and Manual Gate Valves Hydraulic and Manual Gate ValvesTailrod Gate Valves Tailrod Gate ValvesMS Check Valves MS Check ValvesJ-2 Pressure Transmitters J-2 Pressure TransmittersBuffer Tanks Buffer Tanks

    Control Systems Control SystemsHydraulic Hydraulic

    MultiplexAcousticDeadman (DMS)

    Riser SystemsLoadKing Riser SystemsLoadKing Riser Connectors and JointsLoadKing SpidersLoadKing Manual and Hydraulic Running ToolsRF Riser SystemsRF Riser Connectors and JointsRF SpidersRF Manual and Hydraulic Running ToolsTelescoping JointsGoosenecksRiser Fill-Up ValvesTermination SpoolsInstrumentation JointsFlex JointsRST Swivel Tensioning Rings

    This product overview represents the Cameron preferred products for surface and subseadrilling applications. Not all products which appear on this list are represented in this catalog. For additional information, contact the Cameron website at camerondiv.com or contact your Cameron representative.

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • 141

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Drilling Capabilities Overview

    Cameron Drilling Systems Delivered Worldwide for Varied Applications

    Varied Drilling ApplicationsCameron has delivered complete drilling systems fordrillships, semisubmersibles, platforms and jackups.These rigs have rated water depths from several hun-dred to over 10,000 feet and operate from 5000 to15,000 psi working pressure.

    BOP Stack SystemsThe vast majority of these rigs are using Camerons18-3/4 TL BOPs in 4-, 5- and 6- cavity body styles.BOP Stack systems also include Cameron collet connectors including the Model 70, HC, DWHCand HCH4 designs.

    Riser Systems The Cameron LoadKing and RF riser systems arebeing utilized on several of these rigs to meet thedemands of drilling in deepwater. Both riser systemsaccommodate high tension loads and provide formultiple control lines.

    Control SystemsMany of the control systems used on these rigs areCameron Controls Multiplex (MUX) BOP ControlSystems. Camerons MUX system features the lightestweight, most compact pod in the industry today. In addition, Cameron offers the industries only fully

    retrievable MUX pods. The popularity of theCameron MUX control system has made CameronControls the industry leader in the supply of drillingcontrol systems. Cameron Controls also offers direct hydraulic control systems for subsea and land applications.

    Choke Manifold SystemsCameron has also provided the manifold systems for these drilling rigs. Cameron provides completemanifold systems from the surface panels to thechokes, valves, actuators and pressure transmitters.

    Cameron Puts Experience to Work to Develop New and Innovative Solutions for Future Challenges

    Hybrid (Free-Standing Production) RiserSystemCamerons Free-Standing Production Riser System(FSPR) represents an economical alternative to tradi-tional deepwater development concepts includingthe steel catenary riser system.

    Camerons FSPR was installed in 1521 feet (463meters) of water for an early production system, laterretrieved, modified and rerun in 2096 feet (639meters) of water for a deeper field. This representsthe only hybrid riser system installed. Cameron cannow supply various hybrid riser options for the freestanding riser including towed-out and up-endedand stalked-in designs. Camerons options offer theopportunity to decrease the risks and costs typicallyassociated with steel catenary riser systems particu-larly for the larger deeper fields.

    The FSPR system was the winner of the 1989Petroleum Engineer International Meritorious Awardfor Engineering Innovation.

    Free-Standing Drilling Riser SystemBased on the field-proven Free-Standing ProductionRiser System, Camerons Free-Standing Drilling RiserSystem (FSDR) provides an alternative to the time-consuming operation of drilling riser deployment and retrieval in deepwater.

    In this system, a retrievable upper section and afree-standing lower section are mated 300 to 500feet (91 to 152 meters) below the surface of thewater. When disconnect is required, either in an

    emergency or for standard rig operations, the uppersection is retrieved and the lower section is left tofree-stand on the ocean floor. The retrievable risersection can be pulled in several hours, saving rig time during both retrieval and redeployment.

    Camerons free-standing drilling riser is the winner of the prestigious 1999 Petroleum EngineerInternational Meritorious Award for EngineeringInnovation and provides savings by increasing theoperating window, lowering development drillingcosts and lowering maintenance costs.

    SPARs and TLPsCameron has the unique ability to provide a totalsystem for a SPAR or tension leg platform (TLP).Cameron systems are based on field experience andrepresent the most efficient, cost-effective systemspossible for each individual application.

    Camerons broad scope of supply includes subsea, platform and adjustable wellhead systems,BOP stacks, drilling and production risers (includingfree-standing, integral and non-integral systems),completion systems, subsea manifolds, connectionsystems, and drilling and production control systems.Each component, as well as the total system isdesigned based on the best individual solution foreach specific field application. Cameron designs are backed by numerous computer based analysis programs, basin testing and prototype testing, allbased on field data collected from instrumentationpackages.

    Slender Well SystemsThe industry trend today is to look for ways to utilizesecond or third generation vessels for deepwater.Camerons Slender Well Systems provide the contrac-tor with the opportunity to do just that. WithCamerons wellhead, small bore BOP stacks, andreduced bore riser systems, variable deck loads and tension requirements are substantially reduced,and the drilling process is optimized to reduce drilling time.

    Hybrid (Free-Standing Production) Riser System

    Camerons vast experience with both drilling and production systems provides a unique opportunity to design and manufacture integrated systems specifically designedto optimize customer operations. Cameron has provided, designed, or is actively designing Free-Standing Production Riser Systems, Free-Standing Drilling Riser Systems,systems designed for SPAR/TLP applications and Slender Well Systems.

    Cameron has designed, manufactured and delivered surface and subsea drilling systems from the wellhead through the manifold to meet a wide variety of customerrequirements and drilling applications. These systems are on their way to projects from Africa to the Gulf of Mexico, and represent Cameron system solutions and theirarray of design configurations.

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • SD5211-96

    Surface Drilling System ComponentsCameron has a definite advantage in thesupply of complete drilling systems for surface applications. From the BOP to thecontrol system, the manifold to the wellhead, Cameron offers a variety of systems to meet different requirements.Cameron components for surface systemsinclude all the following:

    Cameron BOP Stack1. Annular BOP2. Double Ram-Type BOP3. Drilling Spool4. Manual Gate Valve5. Hydraulic Gate Valve6. Check Valve7. Single Ram-Type BOP8. Casing Head Spool9. Casing Head Housing

    Choke Manifold10. Transmitter11. Pressure Gauge12. Manual Gate Valve13. Hydraulic Gate Valve14. Drilling Choke15. Choke Control Console16. Standpipe Pressure Gauges,

    Gate Valves, Transmitter

    BOP Control System17. Closing Unit18. Pipe Rack19. Remote Control Panel20. Mud Pumps and Manifold,

    Pressure Gauges21. Mud Tanks, Mud Valves, Degasser

    1

    2

    3465

    7

    8

    9

    1817

    15 19

    16

    1214

    13

    10

    2021

    11

    142

    Surface Drilling Systems

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • 143

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Subsea Drilling Systems

    Cameron supplies integrated subsea drilling systemsdesigned specifically to tackle the demands of deepwater,high pressure applications including BOP stack systems,control systems, riser systems and choke systems. Cameronsubsea drilling components include the following:

    Subsea Drilling System Components (Surface)Control System1. Auxiliary Remote Control Panel and Battery Bank2. Drillers Panel3. Hydraulic Power Unit4. Accumulator Bank5. Hose/Cable Reels

    Choke System6. Choke Manifold7. Choke Manifold Control Console

    Riser System8. Telescoping Joint

    Subsea Drilling System Components (Subsea)Control System1. Hydraulic Conduit Supply Line2. MUX Control Pod3. Conduit Valve

    Riser System4. Riser Joint5. Riser Connector6. Termination Spool

    Lower Marine Riser Package7. Flex Joint8. Annular BOP9. Choke/Kill Connector

    BOP Stack10. Subsea Gate Valve11. Double Ram-Type BOP with Super Shear12. Double Ram-Type BOP13. Guide Structure14. Collet Connector

    1

    2

    34

    1

    2

    3

    6

    5

    4

    7

    8

    9

    10

    11

    12

    13

    14

    5

    6 7

    8

    SD24454

    SD24450-96

    RiserSystem

    StackSystem

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • 144

    Ram-Type and Annular BOPs

    Cameron developed the TL and UM ram-type BOPs based on the highly success-ful U BOP design to meet todays demand for reduced weight, lower height andeasier maintenance. Cameron also makes the DL Annular BOP which features alightweight, low profile design available in single or double body styles.

    TL BOPThe TL BOP integrates all of the design features of Camerons popular T and UBOPs into a lightweight unit. The TL offers side ram removal and other featureswhich reduce maintenance and rig time.

    Application: Surface and subseaBore Sizes and Working Pressures: 18-3/4 5000, 10,000, 15,000 psi

    13-5/8 10,000 psiBody Styles: Single, double, triplePressure-Energized Rams: Yes Bonnet Seal Carrier: Standard Hydromechanical Lock: RamLocks (5000, 10,000, 15,000 psi WP)

    ST Lock (10,000, 15,000 psi WP)Wedgelocks (5000 psi WP)

    Hydraulically Opening Bonnets: YesBonnet Studs Instead of Bolts: Yes

    U BOPThe Cameron U BOP is the most widely used ram-type BOP in the world andoffers the widest range of sizes of any Cameron ram-type BOP.

    Application: Surface and subseaBore Sizes and Working Pressures: 7-1/16, 11, 13-5/8 3000 - 15,000 psi

    16-3/4 3000 -10,000 psi18-3/4 10,000 psi 20-3/4 3000 psi 21-1/4 2000, 5000, 10,000 psi26-3/4 3000 psi

    Body Styles: Single, doublePressure-Energized Rams: Yes Bonnet Seal Carrier: Available Hydromechanical Lock: Wedgelocks (with pressure balance

    chambers)Hydraulically Opening Bonnets: Yes

    UM BOPThe UM BOP is a lightweight BOP designed for easy maintenance and long life.The UM complements the existing line of U preventers and includes bonnetswhich can be installed on any comparable size U BOP.

    Application: Surface, subsea, snubbing (7-1/16 only)

    Bore Sizes and Working Pressures: 7-1/16 and 11 3000 - 15,000 psiBody Styles: Single, doublePressure-Energized Rams: Yes Bonnet Seal Carrier: Available Hydromechanical Lock: Wedgelocks Hydraulically Opening Bonnets: YesBonnet Studs Instead of Bolts: Yes

    DL Annular BOPThe Cameron DL annular preventer features a quick-release top for quick packerchange-out. It is shorter in height than comparable annulars.

    Application: Surface and subsea Bore Sizes and Working Pressures: 7-1/16- 21-1/4 2000 - 20,000 psi Body Styles: Single, dual Packer: High performance CAMULAR

    SD24877

    TL Blowout Preventer (Shown With RamLocks)

    UM Blowout Preventer

    SD24361

    DL Annular Blowout Preventer

    SD24889

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    U Blowout Preventer

    SD5308

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • 145

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Rams and Ram Packers

    Cameron offers the most comprehensive line of ramsand ram packers in the industry. Cameron ramscover the full range of drilling requirements includingshearing high strength casing, drill collars, etc.Cameron also offers a choice of rams for variablebore sealing and high temperature applications.

    Cameron is known as a pioneer in variable boresealing technology. The name variable bore ram(VBR) is synonymous with the Cameron VBR.Cameron has now introduced the second generationVBR, the VBR-II. This design offers even more packerlife than the original design. In addition, Cameronoffers the FlexPacker, FlexPacker-NR and the DualBore FlexPacker which provide sealing on specificmultiple bore sizes and fit into existing ram blocks.

    Cameron Elastomer TechnologyOne of the many ways to differentiate Camerondrilling products from other manufacturers is theelastomers used in critical sealing areas such as rampackers and top seals.

    Cameron drilling products exclusively use the proprietary elastomers designed and manufacturedby Cameron Elastomer Technology (CET), located inKaty, Texas. CET provides engineered solutions toelastomeric material problems. For drilling applica-tions, CET has developed CAMRAM, CAMRAM350, CAMULAR, CAMLAST and DUROCAMelastomer products to meet the rigorous demands of the oilfield.

    These products, when used in Cameron ram-type BOPs and annular BOPs, improve performance, extend service life, reduce downtimeand lower operating costs.

    VBR-II

    FlexPacker-NR

    Dual Bore FlexPacker

    SD24363

    SD24364

    FlexPacker

    SD10315

    SD016389

    CAMRAM 350 PackerSD7395

    Inserted Packer for Stripping and Snubbing

    SD24413

    Description TL BOP UM BOP U BOP Elastomer Per NACE

    Shearing

    Shearing Blind Rams Available in Some Sizes Available Available CAMRAM Nitrile Yes

    DVS Shear Rams Available in Some Sizes Available in Some Sizes Available in Some Sizes CAMRAM Nitrile Yes

    Super Shear Rams Available Available in Some Sizes Available See Note No

    Variable Bore Sealing

    VBR-IIs Available in Some Sizes Available in Some Sizes Available in Some Sizes CAMRAM Nitrile Yes

    FlexPackers Available in Some Sizes Available in Some Sizes Available in Some Sizes CAMRAM Nitrile Yes

    FlexPacker-NRs * Available in Some Sizes Available in Some Sizes Available in Some Sizes CAMRAM Nitrile Yes

    Dual Bore FlexPackers Available in Some Sizes Available in Some Sizes Available in Some Sizes CAMRAM Nitrile Yes

    Pipe Rams

    Standard Service Yes Yes Yes CAMRAM Nitrile Yes

    High Temperature Service Yes Yes Yes CAMLAST Yes

    Snubbing/Stripping

    Grip and Seal Rams Not Available 7 Only Not Available CAMRAM Nitrile Yes

    Snubbing Insert Packers Not Available 7 Only Not Available CAMRAM Nitrile Yes

    Cameron Ram Selection Chart

    Note: Super Shear Rams do not seal* Cameron also offers special hang-off FlexPacker-NR assemblies

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • 146

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Collet Connectors and Riser Systems

    Collet ConnectorsAs drilling depths have increased, Cameron collet connectors have evolved toaddress issues concerning higher internal and external pressures, increasingapplied bending and tension loads and extreme operating conditions. Cameronoffers four collet connectors:

    Model 70 Collet Connector High Capacity (HC) Collet Connector Deepwater High Capacity (DWHC) Collet Connector HCH4 Collet Connector

    The Model 70 is offered in sizes and pressure ratings for a wide variety ofapplications. The HC is similar to the Model 70 but is designed to providegreater preload to withstand higher separating forces. The DWHC is a highstrength drilling and completion collet connector engineered for the high loadsencountered in ultra deepwater applications. The HCH4 connector locks onto an H4 wellhead.

    All Cameron connectors offer high strength and stiffness with a direct loadpath through the connector and metal-to-metal sealing AX gaskets on the colletend ensure seal integrity. Positively driven-open collet segments during unlockensure that no overpull is required to disconnect. A secondary unlock function is also included in each design.

    DWHC Collet ConnectorHC Collet ConnectorModel 70 Collet Connector

    Riser Systems Cameron offers drilling riser systems which accommodate the stringent condi-tions encountered in deepwater drilling including high tension loads, multiplecontrol lines, and the need to respond to changes in surface weather conditions.

    The LoadKing family of riser connectors is designed to meet the demands of ultra deepwater drilling in water depths of 7000 feet (2134 meters) or more.

    The RF riser connector is designed to meet API 16R requirements with fewercomponents and higher capacity than other flanged riser connectors.

    SD24878 SD24879 SD24880

    Collet Connector ModelAvailability and Performance Model 70 HC DWHC HCH4

    Available Bore Sizes 13-5/8 to 21-1/4 13-5/8 to 21-1/4 18-3/4 18-3/4

    Available Working Pressures 2000 - 15,000 psi 5000 - 15,000 psi 15,000 psi 10,000 - 15,000 psi

    Bending at 10,000 psi WP, 549,000 ft-lb 2,063,000 ft-lb 10,300,000 ft-lb 2,109,000 ft-lb2,000,000 lb Tension

    Preload 245,000 lb 4,385,000 lb 12,000,000 lb 4,740,000 lb

    Maximum Release Angle 30 30 7 4

    Note: Data for the Model 70, HC and HCH4 represents 10,000 psi WP connectors.

    Description LoadKing RF

    Rated Tension Load 3,500,000 lb 2,000,000 lb

    Auxiliary Lines Up to Six Positions Up to Six PositionsFixed Interchangeable

    2- 6-3/4 OD 2 - 5-1/2 OD

    Trim API 16 R API 16RNACE MR-01-75

    Riser System

    SD24362

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Subsea Production

    Products Overview . . . . . . . . . . . . . . . . . . . . . . . .147

    MOSAIC Subsea Production Systems . . . . . .148-149

    SpoolTree Production Systems . . . . . . . . . . . . . .150

    Dual Bore Production Systems . . . . . . . . . . . . . . .151

    Subsea Systems . . . . . . . . . . . . . . . . . . . . . . . . . . .152

    Table of Contents

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

    ecat section pages 1/13/00 5:52 PM Page 2

  • 147

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Products Overview

    MOSAIC Elements Major Components Variations

    Position Elements Drilling Guidebases Guideline, Guidelineless

    Production Guidebases One, Two or Three-Slot

    Templates Various Multiples of Guidebases

    Porches

    Pressure Elements STM Wellhead To 15,000 psi WP

    Five String, Six String

    Hub Profile, Mandrel Profile, DWHC Profile

    High Pressure Lockdown, Standard Lockdown

    STC Wellhead To 10,000 psi WP

    Five String, Six String

    Hub Profile, Mandrel Profile

    Mudline Wellhead Centric 15, Centric 15 EX, WMSW

    Distribution Elements Flowbases Satellite, Water Injector, Gas Lift, Daisy Chain

    Manifolds Varies Depending on Number of Modules and Size

    and/or Quantity of Headers

    Valve Blocks

    Connectors

    Structure

    Porch Extensions

    Umbilical Termination Assemblies HUTA, EUTA, CDU

    Access Elements SpoolTree Christmas Trees Guideline, Guidelineless

    Production, Gas Lift, Water Injection

    Dual Bore Christmas Trees Guideline, Guidelineless

    Production, Gas Lift, Water Injection

    Block Valves Up to 40 Wing Valve Arrangements

    Single or Double Master Valves

    Gate Valves FL or FLS Gate Valves

    Threaded, Flanged, Block

    Variety of Trims

    Gate Valve Actuators CM Actuator

    Chokes Non-Retrievable

    Retrievable with Clamp Connector

    Retrievable with Crown Connector

    Choke Actuators Stepping Linear Choke Actuator (Pneumatic)

    Aqua-Torq Actuator (Hydraulic)

    Control Elements CAMTROL Advanced Multiplexed Control System Up to 32 Hydraulic Functions

    Diver Assist, Guideline, Guidelineless or ROV

    Connection Elements Horizontal Pull In or Lay Away

    Vertical

    Diver-Assist

    ROV Stab and Hinge

    Structural Mooring

    Subsea Product ion

    This product overview represents the Cameron preferred products for subsea production applications. Not all products which appear on this list are represented in this catalog. For additional information,contact the Cameron website at camerondiv.com or contact your Cameron representative.

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

    1-18 single page 11/4/99 2:14 PM Page 13

  • 149148

    Todays Cameron Modular Subsea And IntegratedCompletion (MOSAIC) systems build on Cameronslong history of subsea success. MOSAIC systems are a combination of standardized components thatfit together in a modular fashion. In the MOSAICsystem, six basic elements or component familieshave been designated.

    Position ElementsMOSAIC Position Elements include drilling guidebas-es, production guidebases, templates and porches for other MOSAIC elements, like controls and remoteconnectors.

    Position Elements come guideline and guideline-less, with one, two or three slots and in sizes rangingfrom small for single satellite or offset wells to large,multi-well templates. Templates are simply the

    combination of four or more guidebases into a single, pre-tested unit. Any number of wells can beaccommodated through multiples of the three basicguidebases. Position Elements are often combinedwith Distribution Elements, such as manifolds andumbilical termination assemblies, as complete, pre-engineered assemblies.

    Pressure ElementsSubsea wellheads and pressure caps are categorizedas Pressure Elements in the MOSAIC System. The pri-mary Cameron wellhead is the STM WellheadSystem, which is offered in standard and enhanceddeepwater, high-capacity versions. The STM (singletrip, metal-seal) wellhead is an all-purpose productfor applications to 15,000 psi.

    Distribution ElementsDistribution Elements in the MOSAIC system include flowbases, manifolds and umbilical terminationassemblies. These assemblies are used to receive produced fluids from multi-well templates or satellitewells in order to control, commingle and divert theflow to a production riser or pipeline.

    Pre-engineered MOSAIC flowbases are availablefor a variety of single well applications such as production satellite, water injector, gas lift productionand intermediate daisy-chain base. For two wells ormore, pre-engineered MOSAIC components can beconfigured into manifolds to be used with satelliteproducers, injectors, daisy-chains and combinationsof these.

    MOSAIC Subsea Production Systems

    Access ElementsAccess Elements include subsea Christmas trees,workover risers, pig launchers and removable pigging loops. Cameron has redesigned its subseatree products into modular assemblies utilizing pre-engineered subcomponents. These subcompo-nents provide operators with standardized assem-blies, yet allow re-arrangement of the subcomponents for flexibility in tailoring equipment systemsto individual field requirements.

    Cameron currently offers a choice of two highlyreliable and feature-rich Christmas trees in itsMOSAIC system: the innovative Cameron SpoolTreesubsea tree, and the Cameron dual bore conven-tional tree. A standard mudline tree configuration is also available.

    Control ElementsControl Elements supply power feedback, telemetryand logic to operate other MOSAIC elements. ThisMOSAIC family includes control systems, chokes,multiplex control modules or pods, CameronHydraQuad couplers and ROV panels.

    The CAMTROL Advanced Multiplexed SubseaProduction Control System offers a modularapproach to controlling subsea systems. The system is applicable to many field conditions andcan be easily adapted for use in deepwater orshallow water; with trees or manifolds; or with

    virtually any production scenario.The CAMTROL system uses common intervention

    methods for the installation and retrieval of the sub-sea control module,chokes, accumulator modulesand multi-phase flow meters. Methods may

    include diver-assist, diverless, guideline, guideline-less, ROV assisted and totally autonomous.

    The CAMTROL control module incorporatesdirectional control valves which have been miniatur-ized and modularized into a single valve block capable of controlling four functions. Each modulecan accommodate up to eight directional controlvalves for control of 32 hydraulic functions.

    Connection ElementsConnection Elements include pipeline, flowline andumbilical connection systems and are typically usedin horizontal, vertical, diver-assist or ROV-drivenapplications. MOSAIC Connection Elements utilize common interfaces which allow a variety of different types of connection systems to beattached.

    SD24982

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVESCAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • SpoolTree Production Systems

    Modular SpoolTree System Spool Body and Valve Assembly Configurations

    In the Cameron SpoolTree design,the spool body provides outlets to attach production,annulus and isolation valves for downhole functions and the electrical penetrator bonnet assembly. The tubing hanger landing shoulder is specially ported to acceptcontrol stabs and provides hydraulic continuity between the production control system and downhole hydraulics.

    The valves are contained both as an integral part of the spool body, and in mini-blocks external to the vertical bore of the tree. A typical valve cluster includes production and annulus master valve, production and annulus wing valve, crossovervalve, workover valve and isolation valves for SCSSV, CIV and other requirements.Assemblies are available for 3 through 7 completions.

    Basic Chemical Injection Annulus Crossover

    Gas Lift ChokeProduction Choke

    The Cameron SpoolTree Production System is one ofthe most widely used trees in the world and offersmany time and cost saving advantages over conven-tional tree systems.

    Instead of the typical wellhead-hanger-tree stack-up, the SpoolTree design has a wellhead-tree-hangerstackup. In this configuration, the Christmas treeconsists of a concentric bore spool with a wellhead

    connector below and a wellhead connector profileon top. The tubing hanger is hung off inside thespool on a dedicated load shoulder, and the valvesare situated on the side of the spool. No valves arein the vertical bore of the wellhead/tree system. Thecompletion is run after the tree is installed and thecompletion can be pulled with the tree in place andflowline connections undisturbed.

    MOSAIC SpoolTree Production Systems can beconfigured with a wide array of component choices.The possible combinations of components, availablepressure ratings and sizes are virtually endless. Theresult is a cost-effective system that can be adaptedto virtually any subsea job.

    SpoolTree Subsea Production System

    1. Guidebase.For template or satellite installation. Guideline or guidelineless. Variety of connection types available.

    2. Valve Actuator.25 Compact Modular (CM) modules available. Sizes from 2 to 7. To 15,000 psi WP .

    3. Internal Tree Cap.WIth or without wireline plugs.

    4. Tree Connector.Mechanical or hydraulic. Deepwater high capacity (DWHC) model available.

    5. Wellhead.STM or STC wellhead. Metal-to-metal or metal end-cap seals. Five or six string configuration. Variety of casing programs.

    6. Spool Body and Modular Gate Valve Assembly.Configured for various production applications. Cameron FL, FLS or FLS-R gate valves. Working pressures up to 15,000 psi.

    7. Flowline and Pipeline Connection.Vertical, horizontal, diver assist or ROV. Common interfaces used throughout.

    8. Tubing Hanger.Up to six hydraulic and two electrical penetrations. 3 through 7 completions.

    9. Subsea Choke.Diver-assist or diverless. Inserts are retrievable or non-retrievable (fixed). Crown or clamp connectors.

    10. Control Module.Up to 32 hydraulic control points. Variety of intervention methods.

    11. Debris Cap. (Not Shown)Weight set or hydraulic

    1

    2

    3

    4

    5

    6

    7

    89

    10

    SpoolTree Production System

    150

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    SD24881

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Dual Bore Production Systems

    Production

    Production withInternal Crossover

    Production with InternalCrossover and Choke

    Production with Choke andAnnulus Connection

    Production with Choke

    Gas Lifted Production with Two Chokes

    Cameron Dual Bore Production System Valve Assembly Configurations

    The Cameron Modular Dual Bore Tree has a total of 320 pre-determined master valveblock assemblies to choose from, covering most system arrangements. Valve assembliesare available in 4", 5", or 6-3/8" nominal bore sizes with 5,000, 10,000 or 15,000 psiWP ratings. Valve assemblies feature field-proven Cameron FLS gate valves with one-piece gate, spring-loaded seats and corrosion-resistant, metal-to-metal seals for maxi-mum sealing integrity.

    A choice of 40 valve module arrangements is available for each wing valve block,covering requirements for production, water injection and gas lift. The modules offerflexibility in location of crossover valve, chemical injection valve, etc. Master and swabvalves are located in the well bore. Either commercial cartridge-type isolation needlevalves or Cameron heavy-duty isolation needle valves can be used for chemical injectionand control line isolation.

    Dual Bore Subsea Production System

    1. Guidebase.For template or satellite installation. Guideline or guidelineless. Variety of connection types available.

    2. Valve Actuator.25 Compact Modular (CM) modules available. Sizes from 2 to 7. To 15,000 psi WP .

    3. External Tree Cap. (Not Shown)WIth or without wireline plugs.

    4. Tree Connector.Mechanical or hydraulic. Deepwater high capacity (DWHC) model available.

    5. Wellhead.STM or STC wellhead. Metal-to-metal or metal end-cap seals. Five or six string configuration. Variety of casing programs.

    6. Modular Valve Assembly.Total of 320 configurations available. Cameron FLS gate valves. Working pressures up to 15,000 psi.

    7. Flowline and Pipeline Connection.Vertical, horizontal, diver assist or ROV. Common interfaces used throughout.

    8. Tubing Hanger.Choice of tubing sizes, threads and wireline preps. Metal seals with resilient backup available. One to four SCSSC ports. With or without electrical penetrator.

    9. Subsea Choke.Diver-assist or diverless. Inserts are retrievable or non-retrievable (fixed). Crown or clamp connectors.

    10. Control Module.Up to 32 hydraulic control points. Variety of intervention methods.

    The highly successful Cameron Dual Bore ProductionSystem has been the number one choice of opera-tors for many years. More than 300 have been delivered worldwide since it was introduced in 1985.Todays version has been reengineered for modularityand standard interfaces that have been added toensure compatibility with a wide range of systemsand components.

    The dedicated annulus bore and vertical full-boreaccess to both the production tubing and annulusprovide several advantages. The tubing casing annulus can be circulated and pressure bled off. This simplifies troubleshooting by enabling annulus monitoring for downhole pressure and temperature,sand production and tubing and packer leaks. Well servicing and well conversion are easier and rig hands are familiar with the running tools. In

    addition, one or more electrical penetrators can beprovided for downhole pressure and temperaturegauges and for electrical submersible pumps.

    Versions of the dual bore tree are offered for5000, 10,000 and 15,000 psi WP and water depthsto 10,000 feet. They are used for oil and gas production, gas and water injection service on satellite wells, clusters or templates.

    151

    2

    4

    5

    6

    7 8

    9

    10

    Dual Bore Production System

    SD24882

    1

    SD24883

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • 152

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Subsea Systems

    MOSAIC Deepwater Cluster Manifold Production System

    Four-Well Cluster Manifold System Deployed Through Moon PoolWorlds First 15,000 psi WP Subsea Tree

    Ultra-Deepwater, High Capacity Guidelineless SpoolTree System

    12 Cameron Vertical Connection (CVC) Rigid Pipeline Jumper System

    7 x 2 Dual Bore Subsea Tree

    SD24966 SD24963

    SD24964

    SD24965SD24826

    SD24967

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

  • CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Surface Production

    Products Overview . . . . . . . . . . . . . . . . . . . . . . . .153

    Conventional Wellhead Systems

    S Conventional Wellhead System . . . . . . . . . .154

    IC Convention Wellhead System . . . . . . . . . . .154

    Compact and Multi-Bowl Wellheads

    Standard Snapring Modular Compact (SSMC) Wellhead . . . . . . . . . . . . . . . . . . . . . . . . . .155

    Metal Seal Split Compact Wellhead . . . . . . . .155

    Multi-Bowl Wellhead System (MBS) . . . . . . . .155

    Wellhead Seals . . . . . . . . . . . . . . . . . . . . . . . .155

    Conductor Sharing Wellhead (CSW) . . . . . . . . . .156

    SpoolTree Wellhead System . . . . . . . . . . . . . . . .156

    Adjustable Wellhead System . . . . . . . . . . . . . . . .156

    Wellhead Connection Systems

    CAMFORGE Connection System . . . . . . . . . .157

    FastLock Connector . . . . . . . . . . . . . . . . . . . .157

    FlangeLock Connector . . . . . . . . . . . . . . . . .157

    FastClamp Connector . . . . . . . . . . . . . . . . . .157

    SlipLock Connection System . . . . . . . . . . . . .157

    Table of Contents

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

    ecat section pages 1/13/00 5:52 PM Page 3

  • CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES 153

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Products Overview

    Surface Product ion

    Components Variations

    Wellhead SystemsConventional S Wellhead

    IC WellheadCompact Standard Snapring Modular Compact (SSMC) Wellhead

    Metal Seal Split Compact WellheadMulti-Bowl MBS WellheadInnovative Conductor Sharing Wellhead (CSW)

    SpoolTree WellheadAdjustable WellheadWMSW

    Mudline Suspension Centric 15Centric 15 EX

    Geothermal ConventionalCompact

    Completion SystemsSingle Completions Standard (Single or Dual)

    Metal Sealing (MTBS)Dual Completions CD-2 Tubing Spool with CD-2, CD-2T, CD-2T-CL Hangers

    Wellhead Connection SystemsCold Forged CAMFORGE Wellhead Connection SystemsMechanical SlipLock Connection Systems

    FastLock ConnectorsFastClamp ConnectorsFlangeLock Connectors

    Gate ValvesSlab-Style Gates FL Gate Valves

    FLS Gate ValvesFLS-R Gate Valves

    Expanding Gates M Gate ValvesM215 Gate Valves

    Gate Valve ActuatorsPneumatic MP Series Piston Saf-T-Gard Actuators

    MA Series Diaphragm Saf-T-Gard ActuatorsHydraulic MH 70 Series Saf-T-Gard Actuators

    MH 60 Series Saf-T-Gard ActuatorsHydraulic Wireline Cutting MSVW Saf-T-Gard Actuators

    MWH Saf-T-Gard Actuators

    ChokesControl Chokes Plug and Cage Control Chokes

    External Sleeve Control ChokesNeedle and Seat Chokes H2 Classic Positive and Adjustable Chokes

    H2I Positive and Adjustable ChokesMultiple Orifice Valves (MOVs) MC10 Choke

    MC20 Choke

    Choke ActuatorsElectric Used on MOVsStepping Linear Choke Actuator (SLCA ) Used on Control Chokes

    This product matrix represents the Cameron preferred products for surface production applications. Not all products which appear on this list are represented in this catalog. For additional information, contact the Cameron website at camerondiv.com or contact your Cameron representative.

  • CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES154

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Cameron conventional wellhead systems provide the flexibility, compatibilityand interchangability required for a wide range of applications. Both the Sand IC wellheads consist of the lower casing head housing and hanger, andthe subsequent casing head spools and hangers. Although the wellheads arenot interchangeable, the S wellhead may be used in place of the IC wellhead for all applications. Both wellheads are compatible with most Cameron tubingspool and hanger configurations

    S Conventional Wellhead SystemThe Cameron S Conventional Wellhead System offers the industrys highestcapacity conventional spool-type wellhead and is designed for use with all well depths and all types of completions. It incorporates dual landingshoulders for maximum casing support. This wellhead is the preferred wellhead for the conditions noted in the chart below.

    Working Pressure: Up to 15,000 psi (Excluding tubing spool)Operating Temperatures: -20F to +250F (-29C to +121C)Hang-Off Capacity: Up to 80% of pipe body yieldCasing Head Housings: S, S-11, S-3 Casing Head Spools: S, S-11, S-3 Casing Hangers: SB-3, SB-5, SB-6 slip and seal assemblies Tubing Spools and Hangers: Standard spool: HT, HT-2, T, T-CL,

    C-SRL, C-SRL-CL hangersMTBS spool: MTBS hangerCD-2 spool: CD-2, CD-2T,

    CD-2T-CL hangers

    IC Conventional Wellhead SystemThe Cameron IC Conventional Wellhead System is the preferred wellhead for the conditions noted in the chart below. Although components are not interchangeable, the S Wellhead may be used in place of the IC wellhead forthese applications as well.

    Working Pressure: Up to 10,000 psi (Excluding tubing spool)Operating Temperatures: -20F to +150F (-29C to +65C)Hang-Off Capacity: Up to 50% pipe body yieldCasing Head Housings: IC-2, IC-2-BP Casing Head Spools: IC-2, IC-2-BP, IC-2-LCasing Hangers: IC-1, IC-1P, IC-2 slip and seal assemblies Tubing Spools and Hangers: Standard spool: HT, HT-2, T, T-CL,

    C-SRL, C-SRL-CL hangersMTBS spool: MTBS hangerCD-2 spool: CD-2, CD-2T,

    CD-2T-CL hangers

    Completion SystemsCameron offers a wide variety of tubing spools and hangers for all types of completions: single, dual and high pressure. Completion systems range from low pressure, conventional equipment to systems for severe service and geothermal applications. Like the S and IC wellhead components, all Cameron completion equipment meets or exceeds API 6A specifications. Cameron also offers a complete line of surface Christmas trees to suit all tubing programs for working pressures up to 30,000 psi.

    Conventional Wellhead Systems

    How to Select a Cameron

    Wellhead SystemThe first step in determiningwhich Cameron wellhead system to use is to determinethe casing hanger style thatbest suits the application.Each hanger profile is uniqueand is generally compatiblewith only a limited number ofcasing head/spool bowls.Cameron has a complete lineof slip-type casing hangersdivided into two types: SBand IC, each serving differentapplications.

    Casing Hanger Selection Chart

    API

    TEMPERATURE

    RANGE

    250F121C

    180F82C

    150F65C

    100F38C

    50F10C

    0F-17C-20F-29C

    0 10% 20% 30% 40% 50% 60% 70% 80%

    U T S P

    Hang-Off Capacity (% of Pipe Body Yield)

    (Operating conditions verified by API 6A, 17th Edition, Appendix F testing)

    IC -1IC-1-PIC-2

    SB-6

    SB-5

    SB-3

    S Conventional Wellhead System IC Conventional Wellhead System

    SD24383 SD24384

  • CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

    Standard Snapring Modular Compact (SSMC) Wellhead The SSMC Wellhead is a total system designed to accommodate a variety of standard casing programs and working pressures, while using a minimumnumber of interchangeable components.

    Sizes: 7-1/16 through 20-3/4Working Pressures: Up to 10,000 psiTemperature Range: -20F to +250F (-29C to +121C)Side Outlets: Line pipe threaded, studdedTop Connection: FastLock or FlangeLock Annulus Seals: LS or metal-end-cap (MEC) Tubing Hangers: Interchangeable single, dual and tensionedTubing Hanger Neck Seal: Straight radial lip (SRL)

    Metal Seal Split Compact WellheadThe Metal Seal Split Compact Wellhead is a metal sealing compact wellheadwhich features a split design.

    Sizes: 11 through 20-3/4Working Pressures: Up to 15,000 psiTemperature Range: -20F to +350F (-29C to +177C)Side Outlets: Line pipe threaded, studdedTop Connection: FastLock or FlangeLock Annulus Seals: JS Tubing Hangers: Interchangeable single, dualTubing Hanger Neck Seal: Straight radial lip (SRL)

    MBS Multi-Bowl Wellhead SystemThe Cameron MBS Multi-Bowl Wellhead System is a compact, multi-bowlwellhead which can be used as an alternative to conventional wellhead systems in platform applications.

    Sizes: 11 through 13-5/8Working Pressures: 10,000 psiTemperature Range: -20F to +250F (-29C to +121C)Casing Connections: Casing box thread, slip-on weld with

    O-ring, CAMFORGE, SlipLock Side Outlets: Line pipe threaded, studdedLock Screws: Two sets of Type NTop Connection: Flanged Casing Hangers: Mandrel Annulus Seals: Energized with plastic packing or lockscrewTubing Hangers: Mandrel Tubing Hanger Neck Seal: Elastomer/Metal

    Wellhead SealsCameron wellheads offer a selection in sealing technology which increasesversatility and ensures that the wellhead is adaptable for any production environment. Available seals include metal-to-metal seals in primary sealingapplications and either LS elastomer seals of the Cameron-exclusive MetalEnd-Cap (MEC) seal in the annulus. All elastomer seals are available in premium elastomer materials developed by Cameron Elastomer Technologyspecifically for oilfield applications.

    155

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Compact and Multi-Bowl Wellheads

    SSMC Compact Wellhead

    SD016743 SD016777

    Metal Seal Split Compact Wellhead

    SD016742

    MBS Multi-Bowl Wellhead

  • CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES156

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Conductor Sharing, SpoolTree and Adjustable Wellheads

    SpoolTree WellheadCSW Wellhead

    SD016746 SD016734

    Adjustable Wellhead System

    SD24874

    Conductor Sharing Wellhead (CSW)The Cameron CSW system provides compact wellhead technology for drillingtwo or more wells through one conductor.

    Sizes: 9 through 20-3/4Working Pressures: Up to 10,000 psiTemperature Range: -20F to +250F (-29C to +121C)Side Outlets: Line pipe threaded, studdedTop Connection: Flanged, JB threadedAnnulus Seals: LS or metal-end-cap (MEC) Tubing Hangers: Interchangeable single, dual or tensionedTubing Hanger Neck Seal: S or straight radial lip (SRL)

    SpoolTree Wellhead SystemThe Cameron SpoolTree Wellhead System incorporates a unique design thatallows maximum production flexibility while reducing costs and improving safety.Workover operations are optimized with minimal equipment handling.

    Sizes: 7-1/16 through 20-3/4Working Pressures: Up to 10,000 psiTemperature Range: - 20F to +250F (-29C to + 121C)Side Outlets: Line pipe threaded, studdedSecondary Seals: Single P, Single T, Double T, NX Bushing,

    Double PTop Connection: Flanged, FastLock, FlangeLock Annulus Seals: LS or metal-end-cap (MEC) Tubing Hangers: Single spool type

    Adjustable Wellhead SystemThe Cameron Adjustable Wellhead System is designed for deepwater comple-tions such as TLPs, SPARs and DDCVs where casing will be suspended at themudline. Systems are available for both single and dual protective casing risers.All systems are designed with fire-resistant sealing and connection technologyfor maximum safety.

    Sizes: 11 and 13-5/8Working Pressures: Up to 15,000 psiTemperature Range: - 20F to +350F (-29C to + 177C)

    with API 6FA, 6FB and 6FC capabilitySecondary Seals: Metal end-cap (MEC) or metal-to-metal Top Connection: FastLockBottom Connection: Buttweld, CAMFORGE or SlipLock

  • CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

    Cameron offers several connection systems which feature reduced make-up timeand increased safety. The CAMFORGE and SlipLock systems are used primarily toattach wellhead housings to surface casing. The FastLock, FlangeLock andFastClamp connections are fast make-up connectors used as end connections forwellhead spools, housings and BOPs.

    CAMFORGE Connection SystemThe CAMFORGE Connection System incorporates a weldless bottom connectionthat makes installation fast, safe and economical. Production losses created byshutting in adjacent wells due to welding are eliminated. Problems associatedwith welding are avoided because the CAMFORGE connection is made usinghydraulic pressure to expand the surface casing and housing.

    Application: Surface conductor-to-casing head housing connectionCompatibility: S and IC wellheads, compact wellheadsSeal Type: Metal-to-metalSizes: Wide range of sizesWorking Pressures: Up to 10,000 psi

    FastLock ConnectorThe FastLock Connector is designed to replace flanged connections for wellheadsand reduce make-up time.

    Application: Replaces standard flanged connection Compatibility: Fits reduced diameter proprietary hubs and standard API

    hubs Gasket Type: CF, BX, RX Working Pressures: Up to 15,000 psiTrim: Fire-tested to API 6FB Part I and II and thermal cycled per

    API 6A Appendix F. Meets NACE and API specifications for H2S service.

    FlangeLock ConnectorThe FlangeLock Connector has been designed as an alternative to the productionversion of the FastLock Connector and can be bolted directly to the Fastlock connector hubs. This allows for a smaller overall completion connection whileproviding maximum flexibility for drilling and workover operations.

    Application: Alternative to production FastLock connector Compatibility: Bolts directly to FastLock hubGasket Type: CF Working Pressures: Up to 6500 psiTrim: Fire-tested to API 6FB Part I and II and thermal cycled per

    API 6A Appendix F. Meets NACE and API specifications for H2S service.

    FastClamp ConnectorThe FastClamp Connector was developed as an alternative to the conventionalclamp assemblies and fits standard clamp hub profiles using conventional APIring gaskets. The connector features reduced make-up torque, faster make-uptimes and improved safety over conventional clamps.

    Application: Replaces standard clamp connections Compatibility: Fits all standard clamp hub profiles Gasket Type: Conventional API ring gasketsWorking Pressures: Up to 15,000 psi

    SlipLock Connection SystemThe SlipLock Connection System uses a simple slip-type mechanism to replaceconventional casing threads or slip-on preparations which require field welding.

    Application: Surface conductor-to-casing head housing connectionCompatibility: S and IC conventional wellheads, compact wellheadsSeal Type: Elastomer (P seal) or metal-to-metal (CANH seal)Sizes: Wide range of sizesWorking Pressures: Up to 10,000 psi

    157

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Wellhead Connection Systems

    SD016801

    FastLock Connector

    SD016220

    FlangeLock Connector

    SD016260

    FastClamp Connector

    SD016259

    SlipLock Wellhead HousingCAMFORGE Wellhead Housing

    SD016801

  • CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    API Gate Valves and Actuators

    API Gate Valves

    Slab-Style Gates . . . . . . . . . . . . . . . . . . . . . . . .158

    Expanding Gates . . . . . . . . . . . . . . . . . . . . . . .158

    Gate Valve Applications Chart . . . . . . . . . . . .158

    FL Gate Valves . . . . . . . . . . . . . . . . . . . . .158-159

    FLS Gate Valves . . . . . . . . . . . . . . . . . . . . .158-159

    FLS-R Gate Valves . . . . . . . . . . . . . . . . . . .158-159

    M Gate Valves . . . . . . . . . . . . . . . . . . . . .158-159

    M215 Gate Valves . . . . . . . . . . . . . . . . . . .158-159

    Saf-T-Gard Actuators

    Actuator Bonnet Assemblies . . . . . . . . . . . . . .160

    Pneumatic Saf-T-Gard Actuators . . . . . . . . . .160

    Hydraulic Saf-T-Gard Actuators . . . . . . . . . . .160

    Wireline Cutting Actuators . . . . . . . . . . . . . . .160

    Surface Safety Systems

    Panel-Based Surface Safety System . . . . . . . . .161

    Self-Contained Surface Safety System . . . . . . .161

    Pilot-Based Surface Safety System . . . . . . . . . .161

    Table of Contents

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

    ecat section pages 1/13/00 5:52 PM Page 4

  • CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES158

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Cameron offers a complete family of gate valves for surface and subsea appli-cations. Selection for a specific application depends on a number of factors.

    Slab-Style GatesCameron slab-style gates are one-piece, solid gates

    which consistently deliver outstanding sealing perfor-mance throughout a wide range of conditions, boresizes and working pressure, including corrosive andabrasive fluid environments. Slab-style gates are usedin the Cameron FL, FLS and FLS-R forged gate valvesfor both manual and actuated applications. Thesevalves meet or exceed the requirements of API

    Specifications 6A, 6A SSV/USV and 17D.The slab-style gate effects a metal-to-metal seal on the flow stream. Its

    simple, straightforward design makes it easy to maintain and ideal for low andhigh pressure sealing where particulate matter could pose a sediment prob-lem. Slab gates may also be used where wireline cutting is required.

    Expanding-Style GatesRecognized worldwide as the Pow-R-Seal gatedesign, expanding-style gates are used in theCameron M and M215 cast body gate valves. Thispopular gate design is used in manual valves to pro-duce a high seating force against both the upstreamand downstream seats simultaneously as the hand-wheel is tightened. This force effects a tight mechani-cal seal which is unaffected by line pressure fluctua-

    tions or vibration. The expanding gate allows a positive mechanical seal acrossboth seats upstream and downstream, with or without pressure.

    The gate assembly uses an angular gate face which is collapsed during trav-el. When closed, a stop causes further downward travel to force the faces ofthe gate outward to effect a positive line flow seal. When opened, a stopcauses further upward travel to force bottom faces to expand and seal againstthe seats to isolate flow from the valve body cavity.

    API Gate Valves

    Cameron Gate Valve Applications

    Environment Slab Expanding

    Surface

    Subsea

    Characteristics Slab Expanding

    Forged Body

    Cast Body

    Manual

    Actuated

    Clad

    Fire Resistant

    Wireline Cutting

    Backseat Capability

    Re-energizable Stem Packing

    FL Gate ValvesCameron FL Gate Valves have earned a reputation in all types of applications.They are full-bore, through-conduit valves with forged bodies and slab gates. FLvalves feature a single spring-loaded, pressure-energized, non-elastomeric lip seal.This seal assists in low pressure sealing and protects against contaminants.

    Sizes: 2-1/16 through 4-1/16Working Pressure: 2000 through 5000 psi Operating Temperatures: -75F to +350F (-59C to +177C)Materials: Variety of trims availableIndustry Standard: API 6A, 17DOptions: Cameron Saf-T-Gard actuators

    FLS Gate ValvesCameron FLS Gate Valves have earned a reputation in all types of applications.They are full-bore, through-conduit valves with forged bodies and slab gates. FLSvalves feature dual spring-loaded, pressure-energized, non-elastomeric lip seals.These seals assist in low pressure sealing and protect against contaminants.

    Sizes: 1-13/16 through 9Working Pressure: 2000 through 20,000 psi Operating Temperatures: -75F to +350F (-59C to +177C)Materials: Variety of trims availableIndustry Standard: API 6A, 17DOptions: Cameron Saf-T-Gard actuators

    FLS-R Gate ValvesCameron FLS-R Gate Valves were designed for use as manuals valve in high-pres-sure, large bore applications. These valves incorporate a lower balancing stemand a unique ball screw mechanism for ease of operation in the field. The FLS-Ris value-engineered for reliability, low torque, ease of operation and service. TheFLS-R has many of the same features as the FLS, including the gate and seatdesign and the pressure-energized lip seal technology.

    Sizes: 4-1/16 through 9Working Pressure: 5000 through 15,000 psiOperating Temperatures: -75F to +350F (-59C to +177C)Materials: Variety of trims availableIndustry Standard: API 6A, 17D

    M Gate ValvesCameron M Gate Valves are through-conduit gate valves featuring W-K-Ms exclusive Pow-R-Seal gate design which creates a positive mechanical seal acrossthe seats, with or without line pressure.

    Sizes: 2-1/16 through 4-1/16Working Pressure: 2000 through 5000 psiOperating Temperatures: -75F to +350F (-59C to +177C)Materials: Variety of trims availableIndustry Standard: API 6A

    M215 Gate ValvesCameron M215 Gate Valves, with expanding Pow-R-Seal gate design, pressure-balanced stem, and metal-to-metal sealing provide safe, dependable ser-vice in 10,000 psi WP applications. The Pow-R-Seal gate design creates a positivemechanical seal across the seats, with or without line pressure.

    Sizes: 1-13/16 through 3-1/16Working Pressure: 10,000 psiOperating Temperatures: -75F to +350F (-59C to +177C)End Connections: Threaded, flangedMaterials: Variety of trims availableIndustry Standard: API 6A

  • CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES 159

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    API Gate Valves

    FL SealFL Gate Valves incorporate a single spring-loaded lip seal.

    SD24149

    FL Gate Valve

    FLS SealFLS Gate Valves incorporate dual spring-loaded lip seals.

    FLS-R SealFLS-R Gate Valves incorporate dual spring-loaded lip seals.

    SD24149

    FLS Gate Valve FLS-R Gate Valve

    SD24151

    M Gate Valve

    SD24152

    M215 Gate Valve

    SD24153

  • CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES160

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Cameron designs and manufactures a full range ofSaf-T-Gard pneumatic piston and diaphragm actua-tors, hydraulic and wireline cutting actuators. Theseactuators can be used on the full line of Camerongate valves in wellhead and pipeline applications.Cameron actuators are designed to be interchange-able and offer a wide range of flexibility.

    Actuator Bonnet AssembliesActuator bonnet assemblies on Cameron FL, FLS andM gate valves provide the interface between the gatevalve and actuator. These bonnet assemblies arecompatible with Cameron hydraulic and pneumaticactuators. They can also be used on other manufac-turers direct-acting and reverse-acting gate valves.

    The bonnet assembly isolates all of the well borefluids in the valve body from the actuator. Field-proven performance, combined with innovative technology, allows Cameron actuator bonnets tomatch specific gate valves metallurgical and elastomeric requirements to extend wear life.

    Pneumatic Saf-T-Gard ActuatorsCameron pneumatic Saf-T-Gard actuators are available in piston and diaphragm designs.

    The MP pneumatic piston actuators are inter-changeable and operate with many types of supply:gas, compressed air, nitrogen, or well gas. Theseactuators are designed to meet a wide range of service requirements and are available in single anddual piston versions in a variety of sizes and pressureranges.

    The MA pneumatic diaphragm actuators simpledesign and operating principle make it inherentlytrouble-free. This series is available in a variety ofactuator diameters and configurations to meet a variety of service requirements.

    Hydraulic Saf-T-Gard ActuatorsCameron hydraulic Saf-T-Gard MH series of actuatorsoffers an intrinsically safe design that can be used in

    hazardous areas. All Cameron hydraulic actuatorsare interchangeable with standard bonnet adapters.The MH series is available in single and dual pistonmodels and in rising and non-rising stem configura-tions. These actuators offer an innovative, feature-rich design that offers the power required to operatesafely and reliably.

    Wireline Cutting ActuatorsCameron offers two models of hydraulic wireline cutting actuators: the MSVW and the MHW.

    The MSVW is an actuator for a surface safetyvalve. It is modular and features interchangeablespring and wireline cutting modules for easy conver-sion from wirecutting to non-wirecutting applica-tions.

    The MHW is a wireline cutting version of the MHseries piston hydraulic actuator. It is a single pistondesign which minimizes the amount of fluid requiredto compress the large power spring.

    MHW SeriesWireline Cutting Actuator

    Saf-T-Gard Actuators

    MP Series Pneumatic Piston Actuator

    SD016724 SD016722

    MH 70 Series Hydraulic Actuator

    SD017082

    FLS Gate Valve with FLS Bonnet

    SD016719

    MA Series Pneumatic Diaphragm Actuator

    SD24875

  • MA16

    161

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Cameron Saf-T-Gard actuators are part of a completeline of equipment for surface safety systems.

    Cameron safety control systems are designed toshut in a flow line in the event of abnormal condi-tion, malfunction or operating irregularity. These systems have the most reliable surface safety shut-down system security available to operators for theprotection of energy resources, property and theenvironment.

    Systems are available to operate single or multi-well installations and units may be operated by compressed air, gas or electricity. Solar panels orwind generators are also available as alternativepower supplies.

    Cameron safety shutdown systems are available ina number of configurations including panel-based,self-contained and pilot-based systems. Componentson Cameron shutdown systems include precision-engineered pilot valves, pressure sensors, inline test

    valves, dump valves, quick bleeds, probes, emer-gency shutdown valves, and pressure regulators.Systems include high and low pressure sensing moni-tors which ensure high calibration accuracy, continu-ous monitoring of shutdown set points and accurateshutdown set point changes. In addition, these sys-tems help reduce maintenance time and costsbecause enclosures meet the requirement for opera-tion in hazardous locations without the need topurge boxes.

    Surface Safety Systems

    Self-Contained Surface Safety System

    ESD

    In ServiceOut of Service

    FusiblePlugSupplyLine

    Fusible Plug

    Pressure to Fusible Plugs

    Fusible Plug

    Hydraulic Pressure to Wing

    Quick Exhaust Return Line

    Hydraulic Pressure to Master

    Sense Line

    Sand Probe Monitor Line

    Hydraulic Pressure to SCSSV

    Control Panel

    Scrubber & PressureRegulator

    Riser

    Flow Line

    Surface ControlledSubsurface SafetyValve

    EmergencyShut-Down

    Station

    FLOW

    SD24345

    SD16739

    SD017002

    Pilot-Based Surface Safety System

    Panel-Based Surface Safety System

    High Pressure Regulator

    Low Pressure Regulator

    ActuatorSupplySource

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

    p9 12/17/1999 2:58 PM Page 1

  • CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Cameron Willis Chokes

    Control ChokesPlug and Cage Control Chokes . . . . . . . . . . . .162External Sleeve Control Chokes . . . . . . . . . . .162

    Needle and Seat Chokes

    H2 Classic Needle and Seat Chokes . . . . . . . . .162

    H2I Needle and Seat Chokes . . . . . . . . . . . . . .162

    MOV Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

    Subsea Chokes

    Non-Retrievable Subsea Chokes . . . . . . . . . . .163

    Retrievable Subsea Chokes . . . . . . . . . . . . . . .163

    Choke Actuators

    SLCA Actuator . . . . . . . . . . . . . . . . . . . . . . . . .163

    Aqua-Torq Subsea Actuator . . . . . . . . . . . . .163

    Table of Contents

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

    ecat section pages 1/13/00 5:52 PM Page 5

  • CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES162

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Cameron Willis is a separately managed unit within the Cameron organizationfocused on the worldwide supply of Cameron and Willis brand chokes and actuators. The Cameron Willis choke product line offers chokes for drilling and production applications both subsea and surface. Chokes are available in a wide range of trim and body materials with a full range of accessories,including actuators.

    Cameron Willis choke products include control chokes (Plug and Cage andExternal Sleeve), needle and seat (positive and adjustable), MOVs, subsea chokes,drilling chokes and choke actuators. Cameron Willis can provide operators with a computer sizing and selection program to determine the right product for theapplication.

    Plug and Cage Control ChokesThe Plug and Cage Control Choke has a plug that throttles the flow on the insidediameter of a ported cage.

    Applications: Wellhead, manifold, separator, let-down, waterflood, CO2, EOR, gas lift, subsea, injection

    Operating Environment: Platform, land-based and subseaService: High flow capacity, moderate erosionModels Available: CC15, CC20, CC30, CC40, CC60Working Pressure: 5000 and 10,000 psiOperating Temperatures: API ratings K, L, P, R, S, T, U, X

    -75F to +350F (-59C to +177C)Materials: API ratings AA, BB, CC, DD, EE, FF, HHTrims: Variety of materials and configurations Actuation: SLCA, Aqua-Torq

    External Sleeve Control ChokesThe External Sleeve Control Choke has a sleeve that throttles the flow on the outside diameter of the ported cage.

    Applications: Wellhead production and injection Operating Environment: Platform, land-based and subseaService: High erosive and high pressure dropModels Available: CC20, CC30, CC40 Working Pressure: 5000, 10,000 and 15,000 psiOperating Temperatures: API ratings K, L, P, R, S, T, U, X,

    - 75F to +350F (-59C to +177C)

    Materials: API ratings AA, BB, CC, DD, EE, FF, HHTrims: Tungsten carbide cage and sleeveActuation: SLCA, Aqua-Torq or user preference

    H2 Classic and H2I Needle and Seat ChokesThe H2 Classic Choke has an externally threaded body and is the standard forneedle and seat chokes. The Cameron H2I Choke has a recessed bean/seatdesign and an externally threaded bonnet cap to ease maintenance.

    Nominal Sizes: H2 Classic: 2, 3, 4, H2I: 2, Needle/Maximum Orifice Size: H2 Classic: 1, 2, 3, H2I: 1, 2Working Pressure: 2000 through 15,000 psiOperating Temperatures: API ratings K, L, P, R, S, T, U, X

    -75F to +350F (-59C to +177C)Materials: API ratings AA, BB, CC, DD, EE, FF, HHNeedle and Seat Trims: Standard: Induction hardened stainless steel

    Super: Stainless steel with tungsten carbide wear surfaces

    Performance Verification: API 6A, including performance verification testing for PR2 level chokes.

    Cameron Willis Control Chokes and Needle and Seat Chokes

    Comparison of Cameron Willis Production Choke Characteristics

    Cameron Willis Choke ModelApplication H2 H2I CC15 CC20 CC30 CC40 CC60 MC-10 MC-20Environment

    Surface Subsea

    CharacteristicsNeedle and Seat Positive Adjustable Multiple Orifice Valve Plug and Cage External Sleeve Manual Actuated

    Plug and Cage Control Choke

    SD016246

    External Sleeve Control Choke

    SD11393

    H2 Classic Positive Choke(Shown without Bean)

    SD9511

    H2I Adjustable Choke

    SD9506

  • CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

    Multiple Orifice Valves (MOVs)The Cameron Willis MOV uses two matched discs, each with a pair of circularopenings to create variable flow areas as one disc is rotated relative to the other.

    Applications: Wellhead, manifold, separator, let-down, waterflood, CO2, EOR, gas lift, subsea

    Sizes: MC-10: 1 - 2-1/16, MC-20: 2 - 4-1/16Working Pressure: MC-10: to 3000 psi, MC-20: to 5000 psiOperating Temperatures: -50F to +250F (-46C to +121C)Materials: API ratings AA, BB, CC, DD, EE, FF, HHTrims: Complete range of materials and trims Actuation: Manual or actuated

    Cameron Willis Non-Retrievable Subsea ChokesCameron Willis subsea chokes are used in production, water injection, gas injection and gas lift applications. Non-retrievable designs are available with plug and cage or external sleeve trim and are used primarily in shallow water oras part of a retrievable manifold/module assembly.

    Nominal Sizes: 2, 3, 4, 6Water Depth Rating: To 10,000 feet (3048 meters)Working Pressure: To 15,000 psiOperating Temperatures: To 400F (204C) Materials: API ratings AA, BB, CC, DD, EE, FF, HHPerformance Verification: API 6A Appendix F, API 17DActuation: SLCA

    Cameron Willis Retrievable Subsea ChokesCameron Willis retrievable subsea chokes are designed with a retrievable insertand a fixed body. Retrievable chokes are available with two types of insert connectors: Crown Connector and Clamp Connector. Retrievable designs are available with plug and cage or external sleeve trim.

    Nominal Sizes: 2, 3, 4Water Depth Rating: To 10,000 feet (3048 meters)Working Pressure: To 15,000 psiOperating Temperatures: To 400F (204C) Materials: API ratings AA, BB, CC, DD, EE, FF, HHPerformance Verification: API 6A Appendix F, API 17DActuation: Aqua-Torq

    SLCA ActuatorThe SLCA Actuator is offered in both surface and subsea designs. It provides pre-cise incremental steps from open to closed.

    Water Depth Rating: To 10,000 feet (3048 meters)Pneumatic Operating Pressure: 100 psi, (80 psi min - 150 psi max),

    110 ft/lb at 100 psiHydraulic Operating Pressure: 1500 psi, (3000, 5000 psi maximum) Operating Temperatures: Surface : -20F to +150F (-29C to 66 C)

    Subsea: 0F to +150F (-18C to 66C)Performance Verification: API 6A PR2, API 17D

    Aqua-Torq Subsea Actuator The Aqua-Torq Actuator is a compact and field-proven design. It provides precise incremental steps from open to closed.

    Water Depth Rating: To 10,000 feet (3048 meters)Hydraulic Operating Pressure: 1500 psi, 3000 psi (5000 psi maximum)Operating Temperatures: 0F to +150F (-18C to 66C)Performance Verification: API 6A PR2, API 17D

    163

    CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Cameron Willis MOVs, Subsea Chokes and Choke Actuators

    MC-10 MOV with Electric Actuator Manual MC-10 MOV

    SD11592SD11593

    Subsea Retrievable Choke with Crown Connector

    Subsea Retrievable Choke with Clamp Connector

    SLCA Surface Actuator

    Aqua-Torq Subsea Actuator(Cutaway View)

    SD11705

    SD24405

    SD24408SD24888

  • CAMERON, P.O. BOX 1212, HOUSTON TX, 77251-1212, TEL: 713.939.2211, FAX: 713.939.2620, WWW.CAMERONDIV.COM

    Cameron Controls

    Drilling Control Systems

    Land and Platform Hydraulic BOP Control Systems . . . . . . . . . . . . . . . . .164

    Subsea Hydraulic BOP Control Systems . . . . . .164

    Subsea Multiplex (MUX) Electro HydraulicBOP Control Systems . . . . . . . . . . . . . . . . .164

    Workover/Installation Control Systems . . . . . . . .164

    Production Control Systems

    CAMTROL Advanced Multiplexed Subsea Production Control System . . . . . . . . . . . . . . .165

    Table of Contents

    CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

    ecat section pages 1/13/00 5:52 PM Page 6

  • CAMSERV | DRILLING | SUBSEA | SURFACE | API GATE VALVES & ACTUATORS | CAMERON WILLIS CHOKES | CAMERON CONTROLS | COOPER CAMERON VALVES

    Cameron Controls is an independently managedorganization within Cameron dedicated to thedesign and manufacture of control systems fordrilling, workover and production applications.

    Drilling Control SystemsAs the worlds leading supplier of BOPs, Cameron isuniquely quali


Recommended