FLUID CONTAINMENT AND CONTROL SPECIALISTS SINCE 1967
CANFLEX® METALLIC GASKETS
Manufacturer's nameor Trademark
Spiral Winding
Winding Metal and Filler
Material
Inner Ring
Manufactured toASME B16.20
Nominal Pipe Sizesand Pressure Classes(standard gaskets only)
Inner Ring MaterialStamped on Inner Ring (when other than Carbon Steel or PTFE)
Outer ring material(when other than Carbon Steel)
Outer (centering) ring
No ColorCANFLEX® Thermal Guard
CANFLEX® High Temp
No Color
No Color
Temperature Limits for Common Metals
Temperature Limits for Filler Material
Gasket Identification MarkingsRequired by ASME B16.20
Spiral Wound Specifications
CANFLEX® Spiral Wound Gaskets
Manufactured in Accordancewith ASME B16.20
Spiral wound gaskets — made with an alternating combination of formed metal wire and soft filler materials — form a very effective seal when compressed between two flanges. A V-shaped crown centered in the metal strip acts as a spring, giving the gaskets greater resiliency under varying conditions.Filler and wire material can be changed to accommodate different chemical compatibility requirements. If the load available to compress a gasket is limited, gasket construction and dimensions can be altered to provide an effective seal.
A spiral wound gasket may include a centering ring, an inner ring or both. The outer centering ring accurately positions the gasket within the flange and acts as a compression limiter, while the inner ring provides additional radial strength. The inner ring also reduces flange erosion and protects the sealing element.
Resiliency and strength make spiral wound gaskets an ideal choice under a variety of conditions and applications. Widely used throughout refineries and chemical processing plants, spiral wound gaskets are also effective for power generation, aerospace, and a variety of valve and specialty applications.
The ASME B16.20 gasket specification has been updated and changed to a new recommended standard. The new criteria incorporates a default to inner rings in all graphite-filled spiral wound gaskets unless the purchaser specifies otherwise. However, a graphite-filled spiral wound gasket without an inner ring will still be stamped with and in compliance to the ASME B16.20 standard.
Advantages■ Durable; easy installation and removal■ Seals pressures to flange ratings, in accordance
with ASME B16.5■ Suited to temperatures from cryogenic to
2000 °F (1093 °C)■ Guide ring simplifies centering of sealing
element on the flange face.■ Custom-tailored solutions accommodate a
variety of conditions by combining various metals and filler materials.
Style RW■ General purpose gasket suitable for flat face and
raised face flanges up to Class 2500■ Centering ring accurately locates the gasket on the
flange face, provides additional radial strength, and acts as a compression limiter
■ Spiral winding (sealing element) consists of pre-formed metal and soft filler material
NOTE: An inner ring is recommended for applications above Class 600, due to the high available bolt load. See Style RWI.
Style RWI■ Suitable for flat face and raised face flanges up to Class 2500■ Recommended for higher pressure applications,
for use with PTFE fillers, and when delineated by ASME B16.20
■ Inner ring acts as a compression limiter and protects sealing elements from process media attack
Style CW■ Suitable for tongue and groove, male-female, or
groove-to-flat face flanges■ Spiral winding only, containing preformed metal and
soft filler material■ Inner and outer diameters of winding are reinforced
with several plies of metal without filler to give greater stability
NOTE: Also available with inner rings Style CWI.
■ Spiral winding only, containing preformed metal and soft filler material.
CANFLEX®
MC and MCR GasketsFor Manhole Cover Assemblies
(manhole cover)
CANFLEX® RW, RWI and CW Gaskets
MC Gasket
Spiral Winding(Sealing Element)
Centering Ring
Spiral Winding(Sealing Element)
Centering Ring
Spiral Winding
Inner Ring
Winding Only
MC Configurations
Oval
ObroundRound
Diameter Height
Height
Width
Width
CompressibleSealing Element
Metal Core
900 - S6G GasketWith flexible graphite sealing element■ Accommodates a wide range of temperatures■ Seals effectively during thermal cycling■ Fire safe - withstood API and FITT fire tests■ Chemically resistant■ Long service life
Benefits■ Accommodates standard ASME flanges as well as
weaker and non-circular flanges■ Seals less-than-perfect flanges■ Handles pressures from vacuum to Class 2500■ Performance replacement for jacketed heat
exchanger gaskets
900 - ePTFE GasketWith ePTFE sealing element■ Chemically inert■ Forms a tight seal under low bolt load■ Conforms to minor sealing surface imperfections■ Withstands temperatures up to 500°F (260°C)
Standard Metals■ 304 Stainless■ 316L Stainless■ INCONEL® 600■ INCONEL® 625■ INCOLOY® 800■ INCOLOY® 825■ HASTELLOY® C276■ MONEL® 400
Sealing Elements■ Flexible graphite■ ePTFE■ Combination graphite
and ePTFE
Superior PerformanceSerrated solid metal core
■ Serrations concentrate bolt load on small area for tight seal at lower stress
■ Solid metal core resists cold flow, over-compression and blowout■ Rigid core provides exceptional stability, even in
large sizes, and facilitates handling and installation
Soft, deformable sealing material
■ Under compression, fills seating surface imperfections to form a tight connection
■ Seals under low stress – ideal for weaker flanges■ Withstands extreme fluctuations in temperature and
pressure■ Integral centering ring ensures optimum gasket
positioning■ Floating centering ring allows for expansion and
contraction during thermal cycling
Applications■ Valves■ Pumps■ Flanges
■ Heat Exchangers■ Vessels
Applications■ Valves■ Pumps■ Flanges
■ Heat Exchangers■ Vessels
CANFLEX® Corrugated Gaskets
Ring Joint Gaskets (API 6A Certified)
CANFLEX® Cammprofile Gaskets
The superior technology of the CANFLEX® corrugated family of gaskets ensures excellent sealing performance and reliability, even in the most difficult applications. Each of the styles combines a corrugated metal core with a compressible sealing element of various materials, for resistance to a wide range of harsh conditions, including extreme temperature, corrosive chemicals, and thermal cycling.
Thomson RTJ gaskets are manufactured in all configura-tions (RX, BX, R Oval and Octagonal) and materials for API wellhead assemblies and high pressure / temperature ASME piping systems. Custom profile gaskets and lens rings are also available upon request.
Construction
CANFLEX® Cammprofile Styles
942 A
942 AR
942 AR2
Gasket Factor "M" = 4.00 "Y" (psi) = 2,500
Heat Exchanger Gasket Configurations
Gasket Styles
Other Styles of CANFLEX® Heat Exchanger Gaskets Available Upon Request
CANFLEX® Heat Exchanger Gaskets
Style 900 – Corrugated Solid MetalA plain, all-metal corrugated gasket
for use in low pressure applications that re-quire a thin line contact because of space or weight limitations. Corrugated gaskets are a versatile sealing ele-ment where the available bolt loads are low. Depending on the mate-rials and construction, these gaskets can be very resilient.
Style 923 – Double - JacketedThe double-jacketed gasket has good
compressibility and resilience and is the most popular clad gasket manufactured.
Style 926 – Double - Jacketed Corrugated
Concentric corrugated sealing element totally encapsulates the soft filler material. The corrugations give improved resilience in applications where thermocycling is a problem.
Style 929 – Double - Jacketed Corrugated with Corrugated Metal Filler
The metal filler in this style has greater resilience to prob-lems resulting from temperature changes. This unique multi-ply construction provides a more resilient gasket that adapts well to temperature and pressure cycling. The temperature limits of this gasket are governed only by the metal selected.
Style 940 – Solid MetalThis plain solid metal gasket
can be supplied in any desired configuration. Where bolting force is sufficient, this style is capable of extremely tight make-ups, giving high me-chanical strength, good heat conductivity, and resistance to temperature, corrosion and pressure.
Style 941 – Solid Metal ProfileProfile gaskets combine the
desirable qualities of a solid metal gasket with the advantages of a reduced area of contact, thereby reducing the bolt load required to effect a seal. This gas-ket has the same advantages of strength, heat conductivity, and resistance to temperature, pressure and corrosion as CANFLEX® Style 940.
www.arthomson.com
CORPORATE PROFILE
The A.R. Thomson Group was established in 1967 as a regional manufacturer/ distributor of gaskets and other fluid containment products. With the rapid growth of oil and gas production, petrochemical, oil refining and pulp and paper industries, our manufacturing facilities expanded to meet increased demand for these products. We currently design and manufacture a wide variety of products using the latest technology. Some examples include:
• allvarietiesofindustrialmetallicandnon-metallicGaskets
• Pre-formedPackinGsetsforvalves,PumPsandmixers
• flexiblemetalhoseandexPansionjoints
• sealsPecialtiesfortheoilandGasindustry
A.R. Thomson Group has also increased the product scope for its Fluid Control Division. This includes a complete line of process and specialty valves along with fittings, pumps and accessories for process as well as product transfer piping systems.
Further to our industrial product offering, ARTG has developed an Energy Efficiency and Environmental program which identifies and minimizes system inefficiencies. The various elements of the program can significantly reduce operating costs and environmental impact. As part of this program ARTG has developed a technical services team which provides:
• on-sitetraininG
• equiPmentsurveysandaudits
• aPPlicationenGineerinG
• maintenanceandrePairoPtimizationProGrams
Since 1967, we have developed our expertise and know-how to become the leader in solving fluid containment and control problems. No matter what your control or containment needs, we can help.
*Red Deer#279 - 37428 Range Road 273T4E 0A1Phone: (403) 341-4511Fax: (403) 341-4243
*Denotes manufacturing location.
Parksville#8 - 1009 Allsbrook RoadV9P 2A9Phone: (250) 954-1543Fax: (250) 954-1591
Calgary#7 - 6320 11th Street SET2H 2L7Phone: (403) 253-0161Fax: (403) 258-0394
Dartmouth10 Morris Drive, Unit 32B3B 1M2Phone: (902) 468-9120Fax: (902) 468-9087
*Surrey7930 130th StreetV3W 0H7Phone: (604) 507-6050Fax: (604) 507-6098
bRITISh COLUMbIA
Fort St. John8910 100th St., Unit CV1J 3X1Phone: (250) 785-6222Fax: (250) 785-6211
ALbERTA
*Fort McMurray230F Mackay CrescentT9H 5C6Phone: (780) 790-0730 Fax: (780) 790-0278
Grande Prairie9602 113th StreetT8V 4Z7Phone: (780) 538-1792Fax: (780) 538-3488
*Edmonton10030 - 31st AvenueT6N 1G4Phone: (780) 450-8080Fax: (780) 463-2021
*Pointe-Claire, PQ294 LabrosseH9R 5L8Phone: (514) 694-2442Fax: (514) 694-2445
SASkATChEwAN
Regina707E McDonald StreetS4N 5M2Phone: (306) 584-2422Fax: (306) 584-2599
qUEbEC NOvA SCOTIA
ONTARIO
MississaugaUnit 1A 3350 Ridgeway Dr L5L 5Z9Phone: (905) 607-6587Fax: (905) 607-6994
*Sarnia281 Campbell StreetN7T 2H2Phone: (519) 336-3678Fax: (519) 336-0589
Prince GeorgeUnit 7, 1839 - 1st AvenueV2L 2Y8 Phone: (250) 563-1444Fax: (250) 563-2644
Thunder BayUnit B 1131 Central Avenue P7B 7C9Phone: (807) 623-0641 Fax: (807) 623-5480
fluiD containment anD control specialists since 1967
CANFLEX® CAMMPROFILE GASKETS
CANFLEX® Cammprofile Gaskets
canflex®cammprofileselectionGuide
manufacturedfromsolidmetal,canflex®cammprofilegasketscombineallofthe
desirablequalitiesofasolidmetalgasketwiththeaddedadvantagesofareducedareaofcontact,resultinginlowerstressvaluesrequiredtoachieveaseal.asastandard,flexiblegraphiteisbondedtoeachfaceduetoitssuperiorsealingcharacteristics.othermetallurgiesandsoftgasketsealingmaterialsareavailableinordertoaccommodatespecificchemicalandtemperatureservicerequirements.
A.R. Thomson Group operates a quality management system which complies with the requirements of ISO 9001.
Style 942 Astandardconstructioncammprofilegasketconsistingofasolidgroovedmetalliccore.style942aisoftenchosenasareplacementfordouble-jacketedgasketsinconventionalheatexchangerapplications.cammprofilematerial,thicknessandsealfacingcanbechosentosuitspecificservicerequirements.
Style 942 ARintegralcenteringringensurescorrectgasketpositioningonmatingflanges.oftenusedonstandardpipeflangesinapplicationsupto2500#.
Style 942 AR2floatingcenteringringallowsforexpansionandcontractioninapplicationswherethermocyclingisprevalent.oftenusedonstandardpipeflangesinapplicationsupto2500#.
Important Note: Product specifications shown are typical. For specific application recommendations please consult your local A.R. Thomson Group representative. Failure to select proper sealing products could result in property damage and/or serious personal injury. A.R. Thomson Group is not liable
for consequential damages resulting from misuse or implied suitability for any service. Specifications are subject to change without notice.
CANFLEX® Cammprofile Styles
Style 942 A
Style 942 AR
Style 942 AR2
Gasket Factor "M" = 4.00 "Y" (psi) = 2,500
canflex®cammprofileorderinginformation
manufacturingspecifications
heatexchangerGasketconfigurations
• standardpipeflangeapplicationsfrom½”–24”• seriesa&bconfigurationsalsoavailableuponrequest• customheatexchangerapplicationupto157”od• customthicknessesfrom.100”to.250”thick• onepiececonstruction
• stylenumber
• metalcoreandsealingelementmaterial
• standardb16.5flanges:Pipeclass,sizeandthickness
• heatexchangers:od,id,thicknessandconfiguration(seeheatexchangerchart)
Pleasespecifythefollowinginformationwhenorderingcanflex®cammprofilegaskets:
+0.004-0.002
+0.005-0.0000.040"
0.004"
90°
R 0.015"
0.012 (ref.)
Cammprofile Core Dimensions
canflex®materialoptions
core material temperature limits
304SS 1400°F 760°C
316SS 1400°F 760°C
317SS 1400°F 760°C
321SS 1400°F 760°C
347SS 1700°F 925°C
Carbon Steel 1000°F 540°C
Alloy 20 1400°F 760°C
HASTELLOY® B2 2000°F 1090°C
HASTELLOY® C276 2000°F 1090°C
INCOLOY® 800 / 825 1600°F 870°C
INCONEL® 600 / 625 2000°F 1090°C
INCONEL® X750 2000°F 1090°C
MONEL® 400 1500°F 820°C
Nickel 200 1400°F 760°C
Titanium 2000°F 1090°C
sealing material temperature limits
Flexible Graphite 950°F 510°C
PTFE 500°F 260°C
EPTFE 600°F 325°C
CANFLEX® High Temp 1850°F 1000°C
www.arthomson.com
corporate profile
The A.R. Thomson Group was established in 1967 as a regional manufacturer/ distributor of gaskets and other fluid containment products. With the rapid growth of oil and gas production, petrochemical, oil refining and pulp and paper industries, our manufacturing facilities expanded to meet increased demand for these products. We currently design and manufacture a wide variety of products using the latest technology. Some examples include:
• allvarietiesofindustrialmetallicandnon-metallicGaskets
• Pre-formedPackinGsetsforvalves,PumPsandmixers
• flexiblemetalhoseandexPansionjoints
• sealsPecialtiesfortheoilandGasindustry
A.R. Thomson Group has also increased the product scope for its Fluid Control Division. This includes a complete line of process and specialty valves along with fittings, pumps and accessories for process as well as product transfer piping systems.
Further to our industrial product offering, ARTG has developed an Energy Efficiency and Environmental program which identifies and minimizes system inefficiencies. The various elements of the program can significantly reduce operating costs and environmental impact. As part of this program ARTG has developed a technical services team which provides:
• on-sitetraininG
• equiPmentsurveysandaudits
• aPPlicationenGineerinG
• maintenanceandrePairoPtimizationProGrams
Since 1967, we have developed our expertise and know-how to become the leader in solving fluid containment and control problems. No matter what your control or containment needs, we can help.
*Red Deer#279 - 37428 Range Road 273T4E 0A1Phone: (403) 341-4511Fax: (403) 341-4243
* Denotes manufacturing location
Parksville#8 - 1009 Allsbrook RoadV9P 2A9Phone: (250) 954-1543Fax: (250) 954-1591
Calgary#7 - 6320 11th Street SET2H 2L7Phone: (403) 253-0161Fax: (403) 258-0394
Dartmouth10 Morris Drive, Unit 32B3B 1M2Phone: (902) 468-9120Fax: (902) 468-9087
*Surrey7930 130th StreetV3W 0H7Phone: (604) 507-6050Fax: (604) 507-6098
british columbia
Fort St. John8910 100th St., Unit CV1J 3X1Phone: (250) 785-6222Fax: (250) 785-6211
alberta
*Fort McMurray230F Mackay CrescentT9H 5C6Phone: (780) 790-0730 Fax: (780) 790-0278
Grande Prairie9602 113th StreetT8V 4Z7Phone: (780) 538-1792Fax: (780) 538-3488
*Edmonton10030 - 31st AvenueT6N 1G4Phone: (780) 450-8080Fax: (780) 463-2021
*Pointe-Claire, PQ294 LabrosseH9R 5L8Phone: (514) 694-2442Fax: (514) 694-2445
saskatchewan
Regina707E McDonald StreetS4N 5M2Phone: (306) 584-2422Fax: (306) 584-2599
quebec nova scotia
ontario
MississaugaUnit 1A 3350 Ridgeway Dr L5L 5Z9Phone: (905) 607-6587Fax: (905) 607-6994
*Sarnia281 Campbell StreetN7T 2H2Phone: (519) 336-3678Fax: (519) 336-0589
Prince GeorgeUnit 7, 1839 - 1st AvenueV2L 2Y8 Phone: (250) 563-1444Fax: (250) 563-2644
Thunder BayUnit B 1131 Central Avenue P7B 7C9Phone: (807) 623-0641 Fax: (807) 623-5480
FLUID CONTAINMENT AND CONTROL SPECIALISTS SINCE 1967
CANFLEX® HIGH TEMPERATURE GASKETS (THT)
• High temperature THT protects the flexible graphite from oxidation at elevated temperatures
• THT wound with flexible graphite ensures added reliability and optimum sealabilty
• Spiral Wound RWI-THT is suitable for services up to 2500# and 1500°F
• CANFLEX® Cammprofile 942AR2-THT is suitable for services up to 600# and 1500°F
Profile
High Temperature Gasket Styles
Construction
• Inhibited flexible graphite filler material
• Heat resistant THT filler material impregnated with a high quality silicone binder
• Suitable as a filler for spiral wound gaskets and as facing on cammprofile gaskets
• Windings, inner rings and outer rings are available in a wide variety of metals and specialty alloys
• Available in standard and custom configurations
CANFLEX®
High Temperature Gaskets (THT)
CANFLEX® THT Construction
Flexible Graphite
FillerTHT Filler THT Filler
Wire
Outer RingInner Ring
GASKET STYLE
CANFLEX® Spiral Wound
CANFLEX® Cammprofile
M Factor 3 4
Y Factor 10,000 2,500
IMPORTANT NOTE: Product specifications shown are typical. For specific application recommendations please consult your local A.R. Thomson Group representative. Failure to select proper sealing products could result in property damage and/or serious personal injury. A.R. Thomson Group is not liable for consequential damages resulting from misuse or implied suitability for any service. Specifications are subject to change without notice. ARTG13412
For your closest branch, please visit WWW.ARTHOMSON.COM
O2
THT Protects Graphite from Oxygen Attack
CANFLEX® Spiral Wound CANFLEX® Cammprofile
CANFLEX® CMGC
A.R. Thomson Group FLUID CONTAINMENT & CONTROL PRODUCTS
fluiD containment anD control specialists since 1967
METAL RING JOINT GASKETS
styles
materials & Dimensions
quality
Style Rstyleristheoriginalringjointgasketdesignwhichcanbeusedinmodernflangeshavingthestandardringjointflatbottomgrooveaswellasolderflangeswiththeroundbottomgroovestyle.theoctagonalversionwasintroducedtoprovideincreasedcontactarearesultinginhigherseal-ingefficiency.
Style BX & RXPressureenergizedringjointgasketswithuniqueselfsealingaction.internalpressureduringserviceincreasesloadingonthegaskettherebyimprovingthegasketsseal-ingperformance.
Gasketmetalshouldbeselectedtosuitthespecificservicecondi-tions.inadditiontothis,thematerialhardnessshouldbelowerthanthatoftheflangemetalinordertoensurethegasketdeformsundercompressionandnotthegrooveofthesealingsurface.descriptionsofcommonmaterialsandhardnessvaluesareasfollows:
A.r.thomsonGroupiscommittedtosafety,reliability,repeatability,traceabilityandtoprovidingqualityproductsandservicestoourcus-tomersthroughapolicyof“continuousimprovement.”thisisdemon-stratedbyourcommitmenttonewproductdevelopment,theintegra-tionoftechnologiesintoourmanufacturingprocesses,thedevelopmentandimplementationoftrainingprogramsforouremployees,andourcompetitivenessintheglobalmarketplace.
material designation maxhardness
rockwellb
maxhardness
brinell
softiron d 56 90
lowcarbonsteel s 68 120
4–6chrome f-5* 72 130
304stainlesssteel s304 83 160
316stainlesssteel s316 83 160
347stainlesssteel s347 83 160
410stainlesssteel s410 86 170
* ASTM specification A 182-72 chemical composition requirements only
commonlyusedintheoil,petroleumandchemicalprocessin-dustries,ringjointgasketsprovideanexceptionalsealwhere
highmechanicalandthermalperformanceisrequired.ringjointgasketsaremanufacturedinavarietyofconfigurations(rx,bx,rovalandoctagonal)andmaterialsforAPiwellheadassembliesandhighpressureAsmepipingsystems.customprofilegasketsandlensringsarealsoavailableuponrequest.
thomson
Metal Ring Joint Gaskets
Important Note: Product specifications shown are typical. For specific application recommendations please consult your local A.R. Thomson Group representative. Failure to select proper sealing products could result in property damage and/or serious personal injury. A.R. Thomson Group is not liable for consequential damages resulting from misuse or implied suitability for any service. Specifications are subject to change without notice.
size Designations for oval or octagonal rings
rX Gaskets for api 6b flanges
www.arthomson.com
bX Gaskets for api 6bX flanges
* ASME B16.47 Series A
* Class 720, 960, & 2900 flanges to API 6B are obsolete. Data are for information only.** Crossover flange connection
nominal pipe size
pressure class
150 300–600 900 1 500 2 500
1/2 r-11 r-12 r-12 r-13
3/4 r-13 r-14 r-14 r-16
1 r-15 r-16 r-16 r-16 r-18
1-1/4 r-17 r-18 r-18 r-18 r-21
1-1/2 r-19 r-20 r-20 r-20 r-23
2 r-22 r-23 r-24 r-24 r-26
2-1/2 r-25 r-26 r-27 r-27 r-28
3 r-29 r-31 r-31 r-35 r-32
3-1/2 r-33 r-34
4 r-36 r-37 r-37 r-39 r-38
5 r-40 r-41 r-41 r-44 r-42
6 r-43 r-45 r-45 r-46 r-47
8 r-48 r-49 r-49 r-50 r-51
10 r-52 r-53 r-53 r-54 r-55
12 r-56 r-57 r-57 r-58 r-60
14 r-59 r-61 r-62 r-63
16 r-64 r-65 r-66 r-67
18 r-68 r-69 r-70 r-71
20 r-72 r-73 r-74 r-75
24 r-76 r-77 r-78 r-79
26* r-93 r-100
28* r-94 r-101
30* r-95 r-102
32* r-96 r-103
34* r-97 r-104
36* r-98 r-105
api ring number
pressure class
2 000 3 000 5 000 10 000 15 000 20 000
bX150 1-11/16 1-11/16
bX151 1-13/16 1-13/16 1-13/16
bX152 2-1/16 2-1/16 2-1/16
bX153 2-9/16 2-9/16 2-9/16
bX154 3-1/16 3-1/16 3-1/16
bX155 4-1/16 4-1/16 4-1/16
bX156 7-1/16 7-1/16 7-1/16
bX157 9 9 9
bX158 11 11 11
bX159 13-5/8 13-5/8 13-5/8
bX160 13-5/8
bX161 16-3/4
bX162 16-3/4 16-3/4 16-3/4
bX163 18-3/4
bX164 18-3/4 18-3/4
bX165 21-1/4
bX166 21-1/4
bX167 26-3/4
bX168 26-3/4
bX169 5-1/8
bX170 6-5/8 6-5/8
bX171 8-9/16 8-9/16
bX172 11-5/32 11-5/32
bX303 30 30
api ring number
pressure class
720, 960 & 2 500*
2 900* 3 000 5 000
rX20 1-1/2 1-1/2 1-1/2
rX23 2
rX24 2 2
rX25 3-1/8
rX26 2-1/2
rX27 2-1/2 2-1/2
rX31 3 3
rX35 3
rX37 4 4
rX39 4
rX41 5 5
rX44 5
rX45 6 6
rX46 6
rX47 8**
rX49 8 8
rX50 8
rX53 10 10
rX54 10
rX57 12 12
rX63 14
rX65 16
rX66 16
rX69 18
rX70 18
rX73 20
rX74 20
rX82 1
rX84 1-1/2
rX85 2
rX86 2-1/2
rX87 3
rX88 4
rX89 3-1/2
rX90 5
rX91 10
rX99 8** 8**
rX201 1-3/8
rX205 1-13/16
rX210 2-9/16
rX215 4-1/16
www.arthomson.com
corporate profile
The A.R. Thomson Group was established in 1967 as a regional manufacturer/ distributor of gaskets and other fluid containment products. With the rapid growth of oil and gas production, petrochemical, oil refining and pulp and paper industries, our manufacturing facilities expanded to meet increased demand for these products. We currently design and manufacture a wide variety of products using the latest technology. Some examples include:
• AllvArietiesofindustriAlmetAllicAndnon-metAllicGAskets
• Pre-formedPAckinGsetsforvAlves,PumPsAndmixers
• flexiblemetAlhoseAndexPAnsionjoints
• seAlsPeciAltiesfortheoilAndGAsindustry
A.R. Thomson Group has also increased the product scope for its Fluid Control Division. This includes a complete line of process and specialty valves along with fittings, pumps and accessories for process as well as product transfer piping systems.
Further to our industrial product offering, ARTG has developed an Energy Efficiency and Environmental program which identifies and minimizes system inefficiencies. The various elements of the program can significantly reduce operating costs and environmental impact. As part of this program ARTG has developed a technical services team which provides:
• on-sitetrAininG
• equiPmentsurveysAndAudits
• APPlicAtionenGineerinG
• mAintenAnceAndrePAiroPtimizAtionProGrAms
Since 1967, we have developed our expertise and know-how to become the leader in solving fluid containment and control problems. No matter what your control or containment needs, we can help.
*Red Deer#279 - 37428 Range Road 273T4E 0A1Phone: (403) 341-4511Fax: (403) 341-4243
*Denotes manufacturing location
Parksville#8–1009 Allsbrook Rd.V9P 2A9Phone: (250) 954-1543Fax: (250) 954-1591
Calgary#7–6320 11th Street SET2H 2L7Phone: (403) 253-0161Fax: (403) 258-0394
Dartmouth10 Morris Drive, Unit 32B3B 1M2Phone: (902) 468-9120Fax: (902) 468-9087
*Surrey7930 - 130th StreetV3W 0H7Phone: (604) 507-6050Fax: (604) 507-6098
british columbia
alberta
*Fort McMurray230F Mackay CrescentT9H 5C6Phone: (780) 790-0730 Fax: (780) 790-0278
Grande Prairie9602 113th StreetT8V 4Z7Phone: (780) 538-1792Fax: (780) 538-3488
*Edmonton10030 - 31st AvenueT6N 1G4Phone: (780) 450-8080Fax: (780) 463-2021
*Pointe-Claire, PQ294 LabrosseH9R 5L8Phone: (514) 694-2442Fax: (514) 694-2445
saskatchewan
*Regina707E McDonald StreetS4N 5M2Phone: (306) 584-2422Fax: (306) 584-2599
quebec nova scotia
ontario
MississaugaUnit 1A, 3350 Ridgeway Dr. L5L 5Z9Phone: (905) 607-6587Fax: (905) 607-6994
*Sarnia281 Campbell StreetN7T 2H2Phone: (519) 336-3678Fax: (519) 336-0589
Prince GeorgeUnit 7, 1839 1st AvenueV2L 2Y8 Phone: (250) 563-1444Fax: (250) 563-2644
Thunder BayUnit B, 1131 Central Ave. P7B 7C9Phone: (807) 623-0641 Fax: (807) 623-5480
A.R. Thomson Group FLUID CONTAINMENT & CONTROL PRODUCTS
For your closest branch, please visit WWW.ARTHOMSON.COM Limitation of liability: A.R. Thomson Group is not liable for consequential damages resulting from misuse or implied suitability for any service. ARTG10903
• Reliable replacement for asbestos gaskets in ASME pressure vessels, pulp digesters, steam and liquor heater applications
• Excellent sealability and resistance to corrosive attack due to the incorporation of 316SS and flexible graphite
• The corrugations provide improved resilience in applications where thermocycling is a problem
• Durable metallic construction facilitates handling; easy to install
ProfileConstruction
• 316SS corrugated double-jacketed• Graphite-XF TGBL filler material• Graphite-XF TGB surface treatment• Available as ring or with partition
rib(s)
Thomson
926-S6GLiquor Heater Gaskets
CANFLEX® Heat Exchanger Gasket Configurations