CANOPY TENTSONE CHOICE - 10 FT. CLASSIC DYE-SUB ALUMINUM CANOPY
PRODUCT CODE: OC-CAS-CST10
One Choice 10 ft. Canopy is an excellent way to provide shade during outdoor events. A standard 10′ x 10′ size with telescopic legs, set up is quick, easy and user-friendly. Comes with a custom dye-sub printed canopy top and carry bag.
PRODUCT DESCRIPTION
• 118.75″ W x 135″ H x 118.75″ D
• 600 Denier Fabric
• 40mm Hex Aluminum Frame
• 126″ W x 87″ H
• Hemmed around sides
DISPLAY DIMENSIONS
GRAPHIC MATERIAL
DISPLAY CONSTRUCTION
GRAPHIC DIMENSIONS
GRAPHIC FINISHING
FEATURES
WEIGHTS & DIMENSIONSTURNAROUND TIME
GRAPHIC PACKAGE AVAILABILITY• 3 business days after
proof approval*• WEST COAST
FULFILLMENT CENTER• (Qty 1): 55 lbs
• (Qty 16): 648 lbs
• (Single Box): 10″ L x 10″ W x 62″ H
• (Freight): 48″ L x 40″ W x 67″ H skid
SHIPPING WEIGHTS PACKAGE DIMENSIONS
(WITH STAND & GRAPHICS)
*After proof approval, for up to 3 sets. Reply with approval via e-mail by 4:00pm PT the day prior to the assigned ship date.
• (Qty 1): Backwall• (Qty 1): Half Side Wall w/ 1 Rail
AVAILABLE ACCESSORIES
Scan QR Code To View More Resources.
Front View Angle View
CANOPY TENTSONE CHOICE - 10 FT. CLASSIC DYE-SUB ALUMINUM CANOPY
PRODUCT CODE: OC-CAS-CST10
Scan QR Code To View More Resources.
PARTS LIST
QTY 1: Black Nylon Carry Bag
QTY 1: Frame w/ Pre-Installed Graphic
Outside Dimensions:• 11″ L x 11″ W x 62″ H
• 10″ L x 10″ W x 61 5/8″ H (Collapse Frame)
Inside Dimensions:• 10 1/2″ L x 10 1/2″ W x 61″ H
CANOPY TENTSONE CHOICE - 10 FT. CLASSIC DYE-SUB ALUMINUM CANOPY
PRODUCT CODE: OC-CAS-CST10
Scan QR Code To View More Resources.
CARE SHEET - DYE-SUB FABRIC
WASHING
STAIN TREATMENT
HANDLING TIPS
1. Wrinkles can be removed with cool iron or fabric steamer.
2. Fabric should NOT be stored when damp or wet. Store in cool, dry area.
3. For storing graphics please remove from plastic packaging that was provided and keep fabric in cool/dry place.
1. Your fabric graphic CANNOT be machine washed. Remove any hardware attached to the fabric prior to cleaning. Spot clean using MILD soap and cool water. Air dry fabric, dry on frame if frame is available.
2. Fabric must be COMPLETELY dry prior to storing.
3. Do NOT dry clean
1. Treat stain on fabric.
2. Remove as much debris as possible with a soft bristle brush (do NOT rub too hard).
3. Use a clean, lint-free white cloth. Lightly pat the stain from the outside moving in (to keep stain from spreading).
4. If a cleaning solution is used, rinse the area well with water to ensure NO solution is left on fabric.
5. Most stains can be treated with household fabric stain removers. It is ALWAYS important to test how the solution will react to the fabric. This can be tested by dabbing solution to a small corner of the fabric. Most household cleaners will provide treatment instructions depending on the type of stain.
• Wrinkles can be removed from fabric with a cool iron or steamer.
• Do NOT machine washed.
• Do NOT bleach fabric
• Do NOT tumble dry. Fabric must be air dried on the frame to prevent shrinking.
FLAGSONE CHOICE - FEATHER FLAG LARGE 14 FT.
SINGLE-SIDED W/SPIKE BASEPRODUCT CODE: OC-FALSSBLGG1
Scan QR Code To View More Resources.
One Choice 14ft. Large Feather Flag w/Spike Base is a great height for garnering attention outdoors. Custom printed on polyester mesh by the process of dye sublimation, inks heavily saturate the material to create a “bleed-through” visual effect for single-sided prints. Black flag trim is sewn on graphic for easy pole insertion. A set of grommets installed on lower trim receives the short bungee cord (included) through its loop and snuggly attaches the graphic to the base. Insert spike base into grass.
PRODUCT DESCRIPTION
• 14′ H (From base of pole)
• Mesh Fabric
• Carbon Composite Flag Poles.
• 24.25″ W x 140″ H
• Hemmed edges with black pole pocket trim.
DISPLAY DIMENSIONS
GRAPHIC MATERIAL
DISPLAY CONSTRUCTION
GRAPHIC DIMENSIONS
GRAPHIC FINISHING
FEATURES
WEIGHTS & DIMENSIONSTURNAROUND TIME
GRAPHIC PACKAGE AVAILABILITY• 2 business days after
proof approval*• WEST COAST
FULFILLMENT CENTER• (Qty 1): 7 lbs
• (Qty 10): 50 lbs (hardware) 14 lbs (graphics)
• (Qty 20): 140 lbs
• (Single Box): 4″ L x 4″ W x 48″ H
• (Master Box): 9″ L x 8″ W x 48″ H (hardware) 20″ L x 16″ W x 6″ H (graphics)
• (Freight): 48″ L x 40″ W x 40″ H skid
SHIPPING WEIGHTS PACKAGE DIMENSIONS
(WITH STAND & GRAPHICS)
*After proof approval, for up to 20 sets. Reply with approval via e-mail by 4:00pm PT the day prior to the assigned ship date.
• 18 - 23 mphWIND SPEED RATING
Front View Single-Sided View
FLAGSONE CHOICE - FEATHER FLAG LARGE 14 FT.
DOUBLE-SIDED W/SPIKE BASEPRODUCT CODE: OC-FALSSBLGG2
Scan QR Code To View More Resources.
One Choice 14ft. Large Feather Flag w/Spike Base is a great height for garnering attention outdoors. Custom printed on polyester mesh by the process of dye sublimation and double-sided prints are finished with a silver-gray blocker that lays between. Black flag trim is sewn on graphic for easy pole insertion. A set of grommets installed on lower trim receives the short bungee cord (included) through its loop and snuggly attaches the graphic to the base. Insert spike base into grass.
PRODUCT DESCRIPTION
• 14′ H (From base of pole)
• Mesh Fabric
• Carbon Composite Flag Poles.
• 24.25″ W x 140″ H (each side)
• Hemmed edges with black pole pocket trim.
DISPLAY DIMENSIONS
GRAPHIC MATERIAL
DISPLAY CONSTRUCTION
GRAPHIC DIMENSIONS
GRAPHIC FINISHING
FEATURES
WEIGHTS & DIMENSIONSTURNAROUND TIME
GRAPHIC PACKAGE AVAILABILITY• 2 business days after
proof approval*• WEST COAST
FULFILLMENT CENTER• (Qty 1): 8 lbs
• (Qty 10): 50 lbs (hardware) 21 lbs (graphics)
• (Qty 20): 140 lbs
• (Single Box): 4″ L x 4″ W x 48″ H
• (Master Box): 9″ L x 8″ W x 48″ H (hardware) 20″ L x 16″ W x 6″ H (graphics)
• (Freight): 48″ L x 40″ W x 40″ H skid
SHIPPING WEIGHTS PACKAGE DIMENSIONS
(WITH STAND & GRAPHICS)
*After proof approval, for up to 20 sets. Reply with approval via e-mail by 4:00pm PT the day prior to the assigned ship date.
• 18 - 23 mphWIND SPEED RATING
Front View Double-Sided View
FLAGSONE CHOICE - FEATHER FLAG LARGE 14 FT.
W/SPIKE BASEPRODUCT CODE: OC-FALSSBLGG1 & OC-FALSSBLGG2
Scan QR Code To View More Resources.
PARTS LIST
QTY 1: Pole 1
QTY 1: Pole 4
QTY 1: Pole 1b
QTY 1: Spike Base
QTY 1: Pole 2
• 45 1/2″ H • 14″ H • 42 5/8″ H
QTY 1: Carry Bag
QTY 1: Pole 3
Outside Dimensions:• 47″ L x 7″ W
Inside Dimensions:• 47″ L x 15″ W
• 3/8″ Diameter (Top Pole) • 1/2″ Diameter (Top Pole)• 5/16″ Diameter (Bottom Pole) • 1″ Diameter (Bottom Pole)
• 5/16″ Diameter (Bottom Pole)
• 42 3/4″ H • 42 3/4″ H • 20″ H (Spike)1 • 3/4″ Diameter (Top Pole) • 3/4″ Diameter (Top Pole)
• 3″ H / 1/2″ Diameter (Swivel)3• 1″ Diameter (Bottom Pole) • 1″ Diameter (Bottom Pole)
• 14″ H (Bearing Houseing to Spike)2
1 2
3
TABLE THROWSONE CHOICE - TABLE THROW
FULL COLOR 6FT 4-SIDED
Scan QR Code To View More Resources.
PRODUCT CODE: OC-TTHRW64G
Table throws are a great addition to your trade show booth. One Choice 6ft. 4-sided Table Throw will fit a standard six foot table. Custom printed edge-to-edge, the full length material will cover the front, back and both sides of the table.
PRODUCT DESCRIPTION
• 72″ W x 29″ H x 27 1/4″ D
• Stretch Fabric
• Paper Transfer Dye-Sub
• 126 1/2″ W x 84″ H
• Hemmed
DISPLAY DIMENSIONS
GRAPHIC MATERIAL
DISPLAY CONSTRUCTION
GRAPHIC DIMENSIONS
GRAPHIC FINISHING
FEATURES
WEIGHTS & DIMENSIONSTURNAROUND TIME
GRAPHIC PACKAGE AVAILABILITY• 2 business days after
proof approval*• WEST COAST
FULFILLMENT CENTER• (Qty 1): 3 lbs• (Qty 100): 350 lbs
• (Single Box): 16″ L x 11″ W x 3″ D • (Freight): 48″ L x 40″ W x 30″ D
SHIPPING WEIGHTS PACKAGE DIMENSIONS
(WITH STAND & GRAPHICS)
*After proof approval, for up to 10 sets. Reply with approval via e-mail by 4:00pm PT the day prior to the assigned ship date.
• 6ft Table: 72″ L x 30″ W x 29″ DCOMPATIBLE TABLE SIZE
Front View Angle View
Scan QR Code To View More Resources.
TABLE THROWSONE CHOICE - TABLE THROW
FULL COLOR 6FT 4-SIDEDPRODUCT CODE: OC-TTHRW64G
CARE SHEET - DYE-SUB FABRIC
1. Wrinkles can be removed with cool iron or fabric steamer.
2. For storing graphics please remove from plastic packaging that was provided and keep fabric in cool/dry place. Fabric should NOT be stored when damp or wet.
3. Do NOT iron directly on printed sections of fabric.
HANDLING TIPS
1. Your fabric graphic can be machine washed. Use MILD soap and cool water. Air dry fabric, dry on frame if frame is available.
2. Fabric must be COMPLETELY dry prior to storing.
3. DO NOT DRY CLEAN
WASHING
1. Treat stain from backside of fabric.
2. Remove as much debris as possible with a soft bristle brush (do NOT rub too hard).
3. Use a clean, lint-free white cloth. Lightly pat the stain from the outside moving in (to keep stain from spreading).
4. If a cleaning solution is used, rinse the area well with water to ensure NO solution is left on fabric.
5. Most stains can be treated with household fabric stain removers. It is ALWAYS important to test how the solution will react to the fabric. This can be tested by dabbing solution to a small corner of the fabric. Most household cleaners will provide treatment instructions depending on the type of stain.
STAIN TREATMENT
• Wrinkles can be removed from fabric with a cool iron or steamer.
• Fabric can be machine washed - use cold water, delicate cycle.
• Do NOT bleach fabric
• Do NOT tumble dry. Fabric must be air dried on the frame to prevent shrinking.