MT121

AUTOMATIC MACHINE TO APPLY PLASTIC CAPS ON PACKAGESAND BOXES OF VARIOUS SIZES

Made in Italy100%

Cap applicator

The caps are poured into a hopper in bulk, orientated and picked up continuously by the machine via suction cups. A hot-melt adhesive system allows an even layer of glue to be applied on the cap that is immediately applied with precision and pressed down on the package until it is perfectly bonded.

www.dominici-italy.it

Possibility of applying clip caps as well as screw caps of different shapes and sizes on liquid packages (brick or gable-top) as well as on boxes for solid products.

Made in Italy100%

Antonio Dominici & F.lli S.r.l.Via Pievaiola, 164/L - 06132 San Sisto - Perugia - Italy

Tel: +39 075 528 8441 / Fax: +39 075 528 0908www.dominici-italy.it

Produzione max18 confezioni/minuto

Technical data

The MT121 is a fast and reliable machine thanks to its high production capacity (over 12000 caps glued per hour, depending on the type of cap) and continuous operationExtremely easy to use and set: the touch screen allows you to view the operating condition of the machine and to adjust the bonding of the cap even while the machine is workingMinimal maintenanceHandled by interpolated brushless servomotorsPossibility of remote assistance and monitoring

Characteristics of the standard machine

Possibility of changing package size rapidly and adjusting the cap in all directions from the touch screen even while the machine is activatedPossibility of centering the cap with extreme precision onto the desired position of the package by means of a vision systemPossibility of orientating the cap by means of a vision system

Optional

Package Size (mm)

Production (packs/hour)

Overalldimensions (mm)

Power

kWWeight

kgmin max max A B C H

50x35x75 100x80x250 12000 3700 1500 4900 2450 7 1400

B

A

C