1725 North Salisbury Blvd.Salisbury, MD 21802, USA+1 800.780-2169+1 410.860.5100Fax: +1 410.860.1949Email: lorchsales@lorch.comwww.lorch.comLORCH CAGE Code: 29971MIL qualified and conforms to the principals set forth in ISO-9001:2000. Environmental, health and safety management system is certified to the requirements of ISO-14001.

LORCH, a Smiths Microwave business, is an internationally recognized leader in RF and Microwave components and systems to military, industrial, and commercial manufacturers worldwide.

Smiths Microwave is a leading provider of components, sub-assemblies, antennas and systems solutions, primarily for defense and aerospace applications, and solutions that test, filter and process high-frequency signals for wireless telecommunication networks. As a family of brands, Kaelus, Radio Waves, TECOM, TRAK, LORCH, TRAK Limited, Millitech, EMC Technology and Florida RF Labs provide exacting solutions for antenna systems for the military and commercial aerospace, transceivers, frequency sources, timing systems, component applications, and a wide range of innovative RF and Microwave solutions for the wireless telecommunications sector.

Lorch’s research and development division is constantly evaluating new materials, plating techniques, and manufacturing processes in order to provide the highest performing components available.

At Lorch Microwave, we believe that our trademark on each and every product is our commitment to you of quality, service, and satisfaction. We understand that our product includes not just the component or system purchase, but rather, the entire purchasing experience. You have our promise that Lorch will continue our tradition of unparalleled service to the microwave industry.

VALUEProvide more than a good product. Deliver excellent “up front” engineering support and focus on customer satisfaction in all we do.

SpeedContinuous effort to stream-line procedures, processes, and techniques to provide quality products quickly and at affordable prices.

InnovationIncorporate the latest technology in design and manufacturing to provide products for present and future applications.

ExecutionSay what we do and do what we say.

A customer expectation and a Lorch promise.

CommitmentAlways endeavor to support what- ever our customers may need. They are the reason that Lorch Microwave employees come to work every day.

Filter Typ e:

Auto Select Ceramic Tublular Discrete Cavity Waveguide

M inimum Stop band Attenuation:AP: dB M H z

AbsoluteRelative to M in.

Insertion L oss in th e Passband

Passband:Center M H zFreq uency:

B andw idth 3 dBV alue:

dB

E q ui-rip p le

M inimus M H zB andw ith :

Insertion L oss:

dB

Return L oss:Typical VSWR: 1.5:1 (14 dB)

M aterial/ Package:Smallest Siz e

Series:Package Standard Series

1

2

3

4

Fin d Filter

Standard Inp ut Ranges:

Standard Center Freq uency Range:

1 MHz to 39000 MHz

For a fi lter with a center frequency outside of thisrange, please contact the factory for a custom design.

Standard B andw idth Range:

1% to 100%

For a fi lter with a passband bandwidth outside of this range, please contact the factory for a custom design.

Maximum Verifi ed Attenuation:

Specifi cations for which attenuation can beverifi ed vary depending on fi lter topology. Pleasesee the notes for each fi lter type for moreinformation.

Typ ical Ap p lications:

Lorch Microwave fi lters are available to suit awide range of applications in the military, commercial and aerospace fi elds. For more information, please see the notes for each fi lter top ology.

Superior performance is achieved through th e use of high “Q” components and computer modeling.

For band-reject fi lters, please contact the factory.

✓

TM Web E dition H elp Start L orch H ome

The Lorch RF & Microwave Filter SelectPlus software program is available at http://fsp.lorch.com/lfsp/main.aspx.

CAPABILITIES FILTER SELECTPLUS™

RF & MICROWAVE FILTER PRODUCTSCavity

WaveguideDiscreteCeramic

Z-Pack SeriesTunableTubular

Wireless ProductsIntegrated Assemblies

RF Signal Products

Manufactured for high-volume, low-cost commercial/industrial applications. Custom configurations, both electrical and mechanical, may be specified for military and space applications.

• 400 MHz to 6000 MHz• Bandwidths: 0.5 to 10%• Surface Mount, PC Mount, Connectorized Options• Stand Alone Filters or Diplexed• Custom Configurations as Requested

Leaded surface mount filters provide the designer with an alternative to traditional axial leads and “gull wing” RF Pin configurations. In addition to ease of installation the Z-Pack Series™ filters exhibit extremely good impedance matching characteristics and very good isolation.

• 30 to 5000 MHz• Leaded Surface Mount Package• Low Profile• Ceramic/Discrete Technology• 2 - 8 Sections• 3 dB Bandwidth (BPF) 2 - 100%

Standard bandpass and band-reject configurations, each operating over a complete octave. Frequency range of 24 MHz to 4 GHz.

• 24 MHz to 4000 MHz• Direct Readout• Octave Tuning• High Power• Digital Controlled Available

Ideal for applications where size is not critical. Features low cost, quick delivery, and availability in bandpass and lowpass options.

• 50 MHz to 20 GHz• 3 - 50% BW• Chebyshev Response Standard• Four Convenient Sizes• Reliable Sturdy Construction

Cavity filters and duplexers for GSM-CGSM-DCS-PCS-UMTS- AMPS & LTE applications. Units are custom designed for low insertion loss and sharp rejection characteristics.

• High Channel to Channel Isolation • Low PIM • High Power • Available in Single Bands or Duplexed

Utilization of multiple switch and filter technologies are combined to provide the optimum in mechanical and electrical performance. Multi-channel switched filter banks, filter amplifiers, and RF distribution assemblies are but a few of the items in this product group.

• 500 MHz to 18 GHz • 2 - 9 Channels Available • Use of Both MIMIC or Solid State Switching

Legacy Custom RF and Microwave signal processing components including RF & Microwave filters and Integrated Assemblies.

• Phase Shifters • Attenuators• Couplers• Power Dividers

High “Q” standard and custom designed models offer the lowest insertion loss and best selectivity available for military and commercial applications.

• 30 MHz to 40 GHz• 3 dB Bandwidths from 0.5 to 66%• High “Q”, Low Loss• High Power• Computer-Aided Designs• Helical, Combline, Interdigital & Waveguide• Multiplexed Options Available Upon Request

Waveguide filters as single bands or in a diplexed configuration. Typical applications for radio communications.

• Frequency Range 2 - 40 GHz• 2 thru 8 Sections• W/G Flange or Connectorized• Stand Alone Filters or Diplexed• WR159 - WR28

These chip and wire devices are designed for optimum performance in a small package where space is a premium. Superior performance is achieved through the use of high “Q” components and computer modeling.

• 5 MHz to 7.5 GHz• BW 3 to >100%• Bandpass, Lowpass, Highpass or Notch• Surface Mount, Pins or Connectors• Monotonic and Elliptic Responses• Chebyshev Standard - Bessel, Gaussian and

Butterworth Responses Available

Cavity Filters Ceramic Filters Wireless Products

Waveguide Filters

Tunable Filters

Integrated Assemblies

Discrete Filters

Tubular Filters

RF Products

Z-Pack Series

FILTERS FILTERS & DIPLEXERS WIRELESS, INTEGRATED ASSEMBLIES & RF PRODUCTS

Manufactured for high-volume, low-cost commercial/industrial applications. Custom configurations, both electrical and mechanical, may be specified for military and space applications.

• 400 MHz to 6000 MHz• Bandwidths: 0.5 to 10%• Surface Mount, PC Mount, Connectorized Options• Stand Alone Filters or Diplexed• Custom Configurations as Requested

Leaded surface mount filters provide the designer with an alternative to traditional axial leads and “gull wing” RF Pin configurations. In addition to ease of installation the Z-Pack Series™ filters exhibit extremely good impedance matching characteristics and very good isolation.

• 30 to 5000 MHz• Leaded Surface Mount Package• Low Profile• Ceramic/Discrete Technology• 2 - 8 Sections• 3 dB Bandwidth (BPF) 2 - 100%

Standard bandpass and band-reject configurations, each operating over a complete octave. Frequency range of 24 MHz to 4 GHz.

• 24 MHz to 4000 MHz• Direct Readout• Octave Tuning• High Power• Digital Controlled Available

Ideal for applications where size is not critical. Features low cost, quick delivery, and availability in bandpass and lowpass options.

• 50 MHz to 20 GHz• 3 - 50% BW• Chebyshev Response Standard• Four Convenient Sizes• Reliable Sturdy Construction

Cavity filters and duplexers for GSM-CGSM-DCS-PCS-UMTS- AMPS & LTE applications. Units are custom designed for low insertion loss and sharp rejection characteristics.

• High Channel to Channel Isolation • Low PIM • High Power • Available in Single Bands or Duplexed

Utilization of multiple switch and filter technologies are combined to provide the optimum in mechanical and electrical performance. Multi-channel switched filter banks, filter amplifiers, and RF distribution assemblies are but a few of the items in this product group.

• 500 MHz to 18 GHz • 2 - 9 Channels Available • Use of Both MIMIC or Solid State Switching

Legacy Custom RF and Microwave signal processing components including RF & Microwave filters and Integrated Assemblies.

• Phase Shifters • Attenuators• Couplers• Power Dividers

High “Q” standard and custom designed models offer the lowest insertion loss and best selectivity available for military and commercial applications.

• 30 MHz to 40 GHz• 3 dB Bandwidths from 0.5 to 66%• High “Q”, Low Loss• High Power• Computer-Aided Designs• Helical, Combline, Interdigital & Waveguide• Multiplexed Options Available Upon Request

Waveguide filters as single bands or in a diplexed configuration. Typical applications for radio communications.

• Frequency Range 2 - 40 GHz• 2 thru 8 Sections• W/G Flange or Connectorized• Stand Alone Filters or Diplexed• WR159 - WR28

These chip and wire devices are designed for optimum performance in a small package where space is a premium. Superior performance is achieved through the use of high “Q” components and computer modeling.

• 5 MHz to 7.5 GHz• BW 3 to >100%• Bandpass, Lowpass, Highpass or Notch• Surface Mount, Pins or Connectors• Monotonic and Elliptic Responses• Chebyshev Standard - Bessel, Gaussian and

Butterworth Responses Available

Cavity Filters Ceramic Filters Wireless Products

Waveguide Filters

Tunable Filters

Integrated Assemblies

Discrete Filters

Tubular Filters

RF Products

Z-Pack Series

FILTERS FILTERS & DIPLEXERS WIRELESS, INTEGRATED ASSEMBLIES & RF PRODUCTS

Manufactured for high-volume, low-cost commercial/industrial applications. Custom configurations, both electrical and mechanical, may be specified for military and space applications.

• 400 MHz to 6000 MHz• Bandwidths: 0.5 to 10%• Surface Mount, PC Mount, Connectorized Options• Stand Alone Filters or Diplexed• Custom Configurations as Requested

Leaded surface mount filters provide the designer with an alternative to traditional axial leads and “gull wing” RF Pin configurations. In addition to ease of installation the Z-Pack Series™ filters exhibit extremely good impedance matching characteristics and very good isolation.

• 30 to 5000 MHz• Leaded Surface Mount Package• Low Profile• Ceramic/Discrete Technology• 2 - 8 Sections• 3 dB Bandwidth (BPF) 2 - 100%

Standard bandpass and band-reject configurations, each operating over a complete octave. Frequency range of 24 MHz to 4 GHz.

• 24 MHz to 4000 MHz• Direct Readout• Octave Tuning• High Power• Digital Controlled Available

Ideal for applications where size is not critical. Features low cost, quick delivery, and availability in bandpass and lowpass options.

• 50 MHz to 20 GHz• 3 - 50% BW• Chebyshev Response Standard• Four Convenient Sizes• Reliable Sturdy Construction

Cavity filters and duplexers for GSM-CGSM-DCS-PCS-UMTS- AMPS & LTE applications. Units are custom designed for low insertion loss and sharp rejection characteristics.

• High Channel to Channel Isolation • Low PIM • High Power • Available in Single Bands or Duplexed

Utilization of multiple switch and filter technologies are combined to provide the optimum in mechanical and electrical performance. Multi-channel switched filter banks, filter amplifiers, and RF distribution assemblies are but a few of the items in this product group.

• 500 MHz to 18 GHz • 2 - 9 Channels Available • Use of Both MIMIC or Solid State Switching

Legacy Custom RF and Microwave signal processing components including RF & Microwave filters and Integrated Assemblies.

• Phase Shifters • Attenuators• Couplers• Power Dividers

High “Q” standard and custom designed models offer the lowest insertion loss and best selectivity available for military and commercial applications.

• 30 MHz to 40 GHz• 3 dB Bandwidths from 0.5 to 66%• High “Q”, Low Loss• High Power• Computer-Aided Designs• Helical, Combline, Interdigital & Waveguide• Multiplexed Options Available Upon Request

Waveguide filters as single bands or in a diplexed configuration. Typical applications for radio communications.

• Frequency Range 2 - 40 GHz• 2 thru 8 Sections• W/G Flange or Connectorized• Stand Alone Filters or Diplexed• WR159 - WR28

These chip and wire devices are designed for optimum performance in a small package where space is a premium. Superior performance is achieved through the use of high “Q” components and computer modeling.

• 5 MHz to 7.5 GHz• BW 3 to >100%• Bandpass, Lowpass, Highpass or Notch• Surface Mount, Pins or Connectors• Monotonic and Elliptic Responses• Chebyshev Standard - Bessel, Gaussian and

Butterworth Responses Available

Cavity Filters Ceramic Filters Wireless Products

Waveguide Filters

Tunable Filters

Integrated Assemblies

Discrete Filters

Tubular Filters

RF Products

Z-Pack Series

FILTERS FILTERS & DIPLEXERS WIRELESS, INTEGRATED ASSEMBLIES & RF PRODUCTS

1725 North Salisbury Blvd.Salisbury, MD 21802, USA+1 800.780-2169 +1 410.860.5100Fax: +1 410.860.1949 Email: lorchsales@lorch.comwww.lorch.comLORCH CAGE Code: 29971MIL qualified and conforms to the principals set forth in ISO-9001:2000. Environmental, health and safety management system is certified to the requirements of ISO-14001.

LORCH, a Smiths Microwave business, is an internationally recognized leader in RF and Microwave components and systems to military, industrial, and commercial manufacturers worldwide.

Smiths Microwave is a leading provider of components, sub-assemblies, antennas and systems solutions, primarily for defense and aerospace applications, and solutions that test, filter and process high-frequency signals for wireless telecommunication networks. As a family of brands, Kaelus, Radio Waves, TECOM, TRAK, LORCH, TRAK Limited, Millitech, EMC Technology and Florida RF Labs provide exacting solutions for antenna systems for the military and commercial aerospace, transceivers, frequency sources, timing systems, component applications, and a wide range of innovative RF and Microwave solutions for the wireless telecommunications sector.

Lorch’s research and development division is constantly evaluating new materials, plating techniques, and manufacturing processes in order to provide the highest performing components available.

At Lorch Microwave, we believe that our trademark on each and every product is our commitment to you of quality, service, and satisfaction. We understand that our product includes not just the component or system purchase, but rather, the entire purchasing experience. You have our promise that Lorch will continue our tradition of unparalleled service to the microwave industry.

VALUEProvide more than a good product. Deliver excellent “up front” engineering support and focus on customer satisfaction in all we do.

SpeedContinuous effort to stream-line procedures, processes, and techniques to provide quality products quickly and at affordable prices.

InnovationIncorporate the latest technology in design and manufacturing to provide products for present and future applications.

ExecutionSay what we do and do what we say.

A customer expectation and a Lorch promise.

CommitmentAlways endeavor to support what- ever our customers may need. They are the reason that Lorch Microwave employees come to work every day.

Filter Typ e:

Auto Select Ceramic Tublular Discrete Cavity Waveguide

M inimum Stop band Attenuation: AP: dB M H z

Absolute Relative to M in.Insertion L oss in th e Passband

Passband:Center M H zFreq uency:

B andw idth 3 dBV alue:

dB

E q ui-rip p le

M inimus M H zB andw ith :

Insertion L oss:

dB

Return L oss:Typical VSWR: 1.5:1 (14 dB)

M aterial/ Package: Smallest Siz e

Series: Package Standard Series

1

2

3

4

Fin d Filter

Standard Inp ut Ranges:

Standard Center Freq uency Range:

1 MHz to 39000 MHz

For a fi lter with a center frequency outside of thisrange, please contact the factory for a custom design.

Standard B andw idth Range:

1% to 100%

For a fi lter with a passband bandwidth outside of this range, please contact the factory for a custom design.

Maximum Verifi ed Attenuation:

Specifi cations for which attenuation can beverifi ed vary depending on fi lter topology. Pleasesee the notes for each fi lter type for moreinformation.

Typ ical Ap p lications:

Lorch Microwave fi lters are available to suit awide range of applications in the military, commercial and aerospace fi elds. For more information, please see the notes for each fi lter top ology.

Superior performance is achieved through th e use of high “Q” components and computer modeling.

For band-reject fi lters, please contact the factory.

✓

TM Web E dition H elp Start L orch H ome

The Lorch RF & Microwave Filter SelectPlus software program is available at http://fsp.lorch.com/lfsp/main.aspx.

CAPABILITIES FILTER SELECTPLUS™

RF & MICROWAVE FILTER PRODUCTSCavity

WaveguideDiscreteCeramic

Z-Pack SeriesTunableTubular

Wireless ProductsIntegrated Assemblies

RF Signal Products

1725 North Salisbury Blvd.Salisbury, MD 21802, USA+1 800.780-2169 +1 410.860.5100Fax: +1 410.860.1949 Email: lorchsales@lorch.comwww.lorch.comLORCH CAGE Code: 29971MIL qualified and conforms to the principals set forth in ISO-9001:2000. Environmental, health and safety management system is certified to the requirements of ISO-14001.

LORCH, a Smiths Microwave business, is an internationally recognized leader in RF and Microwave components and systems to military, industrial, and commercial manufacturers worldwide.

Smiths Microwave is a leading provider of components, sub-assemblies, antennas and systems solutions, primarily for defense and aerospace applications, and solutions that test, filter and process high-frequency signals for wireless telecommunication networks. As a family of brands, Kaelus, Radio Waves, TECOM, TRAK, LORCH, TRAK Limited, Millitech, EMC Technology and Florida RF Labs provide exacting solutions for antenna systems for the military and commercial aerospace, transceivers, frequency sources, timing systems, component applications, and a wide range of innovative RF and Microwave solutions for the wireless telecommunications sector.

Lorch’s research and development division is constantly evaluating new materials, plating techniques, and manufacturing processes in order to provide the highest performing components available.

At Lorch Microwave, we believe that our trademark on each and every product is our commitment to you of quality, service, and satisfaction. We understand that our product includes not just the component or system purchase, but rather, the entire purchasing experience. You have our promise that Lorch will continue our tradition of unparalleled service to the microwave industry.

VALUEProvide more than a good product. Deliver excellent “up front” engineering support and focus on customer satisfaction in all we do.

SpeedContinuous effort to stream-line procedures, processes, and techniques to provide quality products quickly and at affordable prices.

InnovationIncorporate the latest technology in design and manufacturing to provide products for present and future applications.

ExecutionSay what we do and do what we say.

A customer expectation and a Lorch promise.

CommitmentAlways endeavor to support what- ever our customers may need. They are the reason that Lorch Microwave employees come to work every day.

Filter Typ e:

Auto Select Ceramic Tublular Discrete Cavity Waveguide

M inimum Stop band Attenuation: AP: dB M H z

Absolute Relative to M in.Insertion L oss in th e Passband

Passband:Center M H zFreq uency:

B andw idth 3 dBV alue:

dB

E q ui-rip p le

M inimus M H zB andw ith :

Insertion L oss:

dB

Return L oss:Typical VSWR: 1.5:1 (14 dB)

M aterial/ Package: Smallest Siz e

Series: Package Standard Series

1

2

3

4

Fin d Filter

Standard Inp ut Ranges:

Standard Center Freq uency Range:

1 MHz to 39000 MHz

For a fi lter with a center frequency outside of thisrange, please contact the factory for a custom design.

Standard B andw idth Range:

1% to 100%

For a fi lter with a passband bandwidth outside of this range, please contact the factory for a custom design.

Maximum Verifi ed Attenuation:

Specifi cations for which attenuation can beverifi ed vary depending on fi lter topology. Pleasesee the notes for each fi lter type for moreinformation.

Typ ical Ap p lications:

Lorch Microwave fi lters are available to suit awide range of applications in the military, commercial and aerospace fi elds. For more information, please see the notes for each fi lter top ology.

Superior performance is achieved through th e use of high “Q” components and computer modeling.

For band-reject fi lters, please contact the factory.

✓

TM Web E dition H elp Start L orch H ome

The Lorch RF & Microwave Filter SelectPlus software program is available at http://fsp.lorch.com/lfsp/main.aspx.

CAPABILITIES FILTER SELECTPLUS™

RF & MICROWAVE FILTER PRODUCTSCavity

WaveguideDiscreteCeramic

Z-Pack SeriesTunableTubular

Wireless ProductsIntegrated Assemblies

RF Signal Products