All Courses IncludeFree Lunch; Course Book10% Discount for 3 or more attendees
capitalelectriceducation.com
The Electrical Distributor of Choice
Registration on the last pageNFPA70 NEC code book avialable for
purchase for only $89.00
Training CatalogFEBRUARY 2020
2 capitalelectriceducation.com
Welcome to the FebruaryCapital Electric Training Catalog!
The Capital Electric Training Catalog is designed to be an informative tool in bringing customers the most up-to-date information on what Capital Electric is offering on industry knowledge. Updated monthly, the catalog features listings of the scheduled courses and seminars that are currently being offered.
Scheduled Training – Keep a look-out at the counters and in your e-mail, or ask your salesperson for education opportunities Capital Electric offers to our customers. If you see a course or seminar that you are interested in but cannot attend because the date is not good for you, relax! We offer all Scheduled Training classes as On-Site Private Training as well! Remember, dates and locations are subject to change based on registration, etc. Please check capitalelectriceducation.com for the most up-to-date information.
On-Site Private Training – Would you like us to come to you? If you would like a private session for your company to be held at your location, Capital Electric will provide exclusive access to any course we offer. Or if you would like, you can take advantage of our state-of-the-art training facility that seats up to 60 people and have your exclusive training session hosted by us!How to Register 1. Visit capitalelectriceducation.com where you can register for
courses or schedule on-site training.2. Contact Amanda Sockriter at (301) 909-6511 or
ABOUT USCapital Electric is The Electrical Distributor of Choice in the Mid-Atlantic region and a proud member of the Sonepar family. Capital Electric delivers excellence in service, products from the finest lighting and electrical manufacturers, extensive application expertise, and customized, comprehensive solutions to our customers. Staying true to Sonepar’s model of “Local Brands, Local Leaders, Local Execution,” we operate under the Capital Electric name. Altogether, we serve customers in the District of Columbia, Maryland, Virginia, Delaware, Pennsylvania, West Virginia, North Carolina, South Carolina, and Georgia from over 70 locations and from our central distribution center and company headquarters in Upper Marlboro, MD.
MISSION STATEMENTOur mission is to be the Electrical Distributor of Choice for our customers, our employees, and our suppliers.
We will achieve our mission by being: accountable, respectful, ethical, profitable, innovative and professional.
3Capital Electric will not be held liable for typos or misprints. Capital Electric reserves the right to cancel or postpone these events at any time at its sole discretion.
Use our website 24 hours a day, 7 days a week.Visit us at capitalelectriceducation.com!
Table of contents
TRAININGABOUT OUR INSTRUCTORS ........................................................................................................................................ 4
TESTIMONIALS ............................................................................................................................................................... 5
LIGHTING SUMMIT ......................................................................................................................................................... 6
SAFETY CLASSES
Arc Flash & Electrical Safety NFPA 70E (Multiple Locations in MD, VA, & NC) .................................................. 7
PREP CLASSES
40 Hour Journeyman’s Prep Course (Upper Marlboro, MD) .................................................................................. 8Master Prep (Upper Marlboro, MD) .............................................................................................................................. 9Fundamentals of Electrical Work (Upper Marlboro, MD) ........................................................................................10
NEC CODE CLASSES
2020 NEC Analysis of Changes (Multiple Locations in MD, VA & PA)* ................................................................11Transformer Installation Course (Multiple Locations in MD & VA)* ......................................................................12Grounding and Bonding Seminar (Multiple Locations in MD, VA & PA)* ............................................................13The NEC Today (Multiple Locations in NC)* ..............................................................................................................14Grounding and Bonding (Multiple Locations in NC)* ..............................................................................................15Residential Wiring Course (Durham, NC)* .................................................................................................................16Installation and Inspection of Services Course (Durham, NC)*. ............................................................................ 17Transformer Installation Course (Durham, NC)*. ......................................................................................................18
SAFETY FEATURE
Generator Safety .............................................................................................................................................................19
REGISTRATION FORM .................................................................................................................................................23
*Continuing Education Credits Available
4 capitalelectriceducation.com
About Our InstructorsDon A. Hursey retired as Durham City/County Senior Electrical Inspector after 33 years of service. He is a licensed electrical contractor for North Carolina. He received the “Instructor of the Year” Award in 2004 from the NC Board of Examiners of Electrical Contractors, and in 2008 he received the North Carolina “Electrical Inspector of the Year” Award from the NC Chapter of the IAEI. Mr. Hursey is a member of the North Carolina Ellis Cannady Chapter of IAEI Education Committee and NFPA 72 Committee. He is also the North Carolina State Fair Electrical Apprenticeship Contest Judge. Mr. Hursey is also an instructor for NFPA, UL, and the Southeastern OSHA Training Institute Education Center.
Classes Taught: Transformer Installation Course, Electrical Safety Essentials, Residential Wiring Course, Installation and Inspection of Services Course, Grounding and Bonding, The NEC Today
John F. Mayan, PE, CESCP is a licensed Professional Engineer (PE) in DC, DE, MD, and VA, as well as a licensed Master Electrician in DE and MD. With nearly 40 years of experience in the industry, Mr. Mayan is a Senior Electrical Engineer with RMF Engineering in Baltimore, where he is responsible for power systems engineering projects ranging from high voltage transmission systems to low voltage distribution and utilization. Mr. Mayan is also an NFPA Certified Electrical Safety Compliance Professional (CESCP), and he holds a Bachelor of Science in Electrical Engineering from Rochester Institute of Technology.
Class Taught: Arc Flash Safety
Wayne H. Robinson is a retired Chief Electrical Inspector and former supervisor for the Electrical Engineering Department in Prince George’s County, Maryland. He holds multiple International Code Council Certifications for Electrical Inspections and Plan review. Wayne is a Master Electrician in Maryland and the District of Columbia, and has instructed numerous NEC Code courses over the past 30+ years at local community colleges, trade organizations and local governments.
He holds multiple US patents on grounding devices and has published books on Electrical Calculations, Illustrated Guide for Electricians and Inspectors, Grounding, Motor Calculations and Swimming Pool Bonding. Wayne is a current member of National Fire Protection Association (NFPA), International Association of Electrical Inspectors (IAEI) and the Maryland Uniformed Electrical Licensing and Examination Committee (MUELEC).
Classes Taught: Master Electrician Prep Course, 40 Hour Journeyman’s Prep Course, Fundamentals of Electrical Work, Transformer Installation Course, Grounding and Bonding Seminar, NEC Analysis of Changes
Michael V. Robinson is a licensed Master Electrician in Maryland and the District of Columbia and site superintendent for a large electrical contractor in the D.C. Metropolitan Area. He is currently responsible for the code compliant installation of a 1.3 million square foot electrical renovation project and 50+ electricians. In addition, Michael teaches both Journeyman Prep and Master Prep classes at Capital Electric.
Beginning in the trade in 1999, Michael is a 2011 graduate and salutatorian of the Local 26 IBEW Apprenticeship. He also has a B.A. from the University of Maryland at College Park. Michael resides in Prince Frederick, Maryland, is married to wife, Kristin and has two young sons, Brooks and Wade.
Classes Taught: Master Electrician Prep Course, 40 Hour Journeyman’s Prep Course, Fundamentals of Electrical Work, Transformer Installation Course
Robert A. “Bob” Preston, LC, IES is an Energy & Lighting Specialist with the Energy Solutions Group for Capital Electric. Bob is Lighting Certified by the National Council on Qualifications for the Lighting Professions (NCQLP) and is a member of the Illuminating Engineering Society of North America (IES). He has been with Capital Electric for 30 years in a variety of roles including electronics and test & measurement and has been specializing in lighting since 2006.
Bob supports energy efficient lighting activities throughout Capital Electric. He also coordinates utility incentive programs for the sales team and their customers, with particular focus on western MD and Pennsylvania. Over the last ten years, Bob has spearheaded educational lighting seminars across all of Capital Electric’s market area. Hundreds of customers and employees have attended these award-winning events which have focused on the latest advancements in energy efficient lighting technology. Bob specializes in the more technical aspects of lighting applications, particularly in the rapidly developing LED marketplace.
Class Taught: Lighting Technology Update Seminars
William “Bill” O’Connell, LC, LEED AP is a Regional Specification Sales Manager for Eaton’s Lighting Division, formerly known as Cooper Lighting. In addition to responsibility for sales of specification lighting products, Bill also serves as a technical resource for Eaton’s rep agencies, as well as lighting designers, engineering firms, specifiers, and end users, educating them on new lighting products and technologies.
Bill has more than 20 years of experience in the lighting industry. He earned a Bachelor of Science degree in Applied Optics from the Rose-Hulman Institute of Technology along with a minor in Computer Science and a German Technical Translators Certificate. Bill began his career with OSRAM SYLVANIA in 1994 as an Optical Engineer designing optical systems for car headlamps, tail lamps and turn signals. After transferring to OSRAM SYLVANIA’s general lighting division, Bill was awarded two patents, one technical and one design, for the design of SYLVANIA’s SPL optical system which shapes a halogen PAR lamp’s light to provide a more even, high quality distribution across a broad area.
Class Taught: Lighting Technology Update Seminars
5Capital Electric will not be held liable for typos or misprints. Capital Electric reserves the right to cancel or postpone these events at any time at its sole discretion.
TESTIMONIALSWhat attendees are saying...
“Very informative, great visuals with best
knowledge of present & past code.”
D. Gwyn – Ayden, NC
Installation and Inspection of Services
with Don HurseyJohn Mayan Arc Flash &
Electrical Safety
“Interesting, learned information I did not now
was relevant to Arc Flash.” M. Langley – Sterling, VA
40 Hour Journeyman Prepwith Wayne and Michael
Robinson
“Excellent course! All the course material was covered
very well and in a manner that was easy to understand.”
M. Holmes - Washington DC
Transformer Installationwith Don Hursey
“Focused, lots of good information. Stayed on
topic and knew his stuff.” E. Kinney – Richmond, VA
Master Electrician Prep Coursewith Wayne and Michael Robinson
“The course really helps you understand the calculations.”
A. GuIllen – Arlington, VA
Grounding & Bonding with Don Hursey
“Don Hursey provides an unparallelled level of
expertise and knowledge to his students.”
J. Holder – Durham, NC
6 capitalelectriceducation.com
Ten years into the LED revolution and it’s not slowing down. We’ll examine the current state of the technology in 2020, and put special emphasis on Lighting Controls. Installation of controls enhances energy savings, improves performance, expands the capabilities of LED lighting, and creates opportunities for using lighting in ways not previously possible. In addition to covering the latest LED technology, we’ll dig into lighting controls starting with the basics and up to more advanced controls applications. A not-to-be-missed event!
VENDORS*
2020 LIGHTING SUMMITLighting Controls and LED
For More Information, Visit or Call: CAPITALELECTRICEDUCATION.COM | 301.909.6511
Sylvania | Cooper Lighting | Lithonia/Acuity | LutronRAB | Signify/Philips | Progress | WattStopper
TUES 4.21 VIRGINIA BEACH, VA
WEDS 4.22 RICHMOND, VA
THUR 4.23 CHARLOTTESVILLE, VA
TUES 4.28 BALTIMORE, MD
WEDS 4.29 UPPER MARLBORO, MD
THUR 4.30 FAIRFAX, VA
WEDS 5.13 CHARLESTON, SC
THUR 5.14 COLUMBIA, SC
THUR 5.28 DURHAM, NC
TUES 6.09 YORK, PA
WEDS 6.10 HAGERSTOWN, MD
9AM – 3PM | $99
*Participating vendors may vary by location
7Capital Electric will not be held liable for typos or misprints. Capital Electric reserves the right to cancel or postpone these events at any time at its sole discretion.
This one day course meets the mandate of training as prescribed in
the NFPA 70E, 2018 Edition, Chapter 1, Article 110.2.
COST: $299/PERSON
Arc Flash & Electrical Safety NFPA 70E 2018
TIME: 9:00 AM - 3:00 PM
Participants will receive a copy of the 2018 Edition of the NFPA 70E Standard for Electrical Safety in the Workplace - a $76.00 value!
THIS COURSE QUALIFIES
FOR 5 HOURS TOWARDS CEUs IN
MARYLAND!
To register, see the last page of this catalog or visit
capitalelectriceducation.com
Taught by John F. Mayan
FEBRUARY 19, 2020Richmond, VA
MARCH 4, 2020Falls Church, VA
APRIL 8, 2020Upper Marlboro, MD
MAY 6, 2020Durham, NC
AGENDAUpon completion of this course, you will be able to:
• Understand Arc Flash, The Causes And Effects
• Learn What Enforcement Standards Apply
• Understand How to Safely Interact With Electrical Equipment
• Learn What is Involved in the Arc Flash Analysis
• Learn How to Bring a Facility Into Compliance With NFPA 70E
• Investigate Ways to Reduce Arc Flash Hazards
• Become Qualified in the Determination of Arc Flash and
Electric Shock Hazards by Demonstrating Proficiency
• See How Power Systems Analysis Is Used To Develop The
Arc Flash Label
8 capitalelectriceducation.com
ATTENTION ELECTRICIANS!…if you answered YES to these questions, then this class is for YOU!
Sponsored by
Capital Electric Upper Marlboro Training Room
February 4 - March 19, 2020Tuesdays and Thursdays4:30 - 7:30 PM
$549 ea. with a $50 discount if registered & paid prior to Jan 21st. (10% discount for 3 or more employees from the same company) Included with registration: The Illustrated Guide for Electricians and Inspectors (based on the 2017 NEC).
This course is taught by Master Electricians and industry experts Wayne Robinson and Michael Robinson and is based on the 2017 National Electrical Code (NEC)
Want to grow
your career?Preparing
for the Journeyman’s
exam?
Have 4 years working in the electrical trade?
To register, see the last page of this catalog or visit capitalelectriceducation.com
9Capital Electric will not be held liable for typos or misprints. Capital Electric reserves the right to cancel or postpone these events at any time at its sole discretion.
Capital Electric Upper Marlboro Training Room
Tuesdays and Thursdays • 4:30 - 7:30 PMMarch 31 -May 21, 2020
Sponsored by
WHO SHOULD TAKE THIS COURSE?• Anyone interested in becoming
a licensed master electrician or electrical contractor
• Have at least 6 years experience in the electrical trade
• Planning to take the master electrician licensing exam within the next few months
COURSE TOPICS• Branch circuits• Feeder and service
calculations• Voltage drop calculations • Commercial calculations• Appliance calculations
ATTENTION JOURNEYMEN: GET PREPPED! Save $60 if
registered and paid before March 17!
$659 ea.
See back for registration or visit capitalelectriceducation.com
Based on the 2017 National Electric Code
Taught by Master Electrician Wayne Robinson
10 capitalelectriceducation.com
This course is taught by Master Electricians and industry experts Wayne Robinson and Michael Robinson and is
based on the 2017 National Electrical Code (NEC)
NEW TO THE ELECTRICAL TRADE?
INTERESTED IN A CAREER AS AN
ELECTRICIAN?Ideal for anyone with 0-4 years of experience in the electrical
construction field, this five-week introductory training module will cover the basic concepts that all electrical workers need to know.
• Intro to Electrician’s Math
• Intro to Ohm’s Law• Branch Circuits Basics• Switching and
Receptacles• Grounding and
Bonding Basics• Overcurrent Protection
Basics
• Single Phase systems • Introduction to
Electrical Safety• Plans and Symbols• NEC Definitions• Wiring Methods• Conductor Properties• ...and much more!
TOPICS INCLUDE:
Mondays and WednesdaysSeptember 14 - October 14, 2020
4:30 - 7:30 PM Capital Electric Upper Marlboro
Training Room
Sponsored by
AnyAnyExperienceExperience
LevelLevelWelcome!Welcome!
To register, see the last page of this catalog or visit capitalelectriceducation.com
Fundamentals of Electrical WorkFundamentals of Electrical WorkIntroduction to Basic Electrical Construction ConceptsIntroduction to Basic Electrical Construction Concepts
• Early Bird Pricing (before Sept. 1, 2020): $399.00 (must register and pay by Sept. 1)
• Volume Discount = 10% off (3 or more in attendance from the same company)
• Standard Price (after Sept. 1, 2020): $449.00 (any registrations/payments after Sept. 1)
11Capital Electric will not be held liable for typos or misprints. Capital Electric reserves the right to cancel or postpone these events at any time at its sole discretion.
Get up-to-date on the most essential changes in the NEW 2020 NEC, taught by retired
Chief Electrical Inspector and industry expert, Wayne H.
Robinson!
THIS COURSE QUALIFIES FOR 10 HOURS TOWARD CEU CREDIT!
This updated course is based on the latest 2020 edition of the National Electrical Code (NEC). This course qualifies for 10
Credit Hours toward continuing education requirements in the state of Delaware, the state of Maryland, and the following MD counties: Cecil, Harford, Prince George’s, Queen Anne, and Wicomico. NOTE: The state of Virginia has NOT approved
2020 NEC courses for continuing education.
2020 NEC Analysis of Changes
National Electrical Code Seminar
This is a 2 Day Seminar • $349 per person8:00 AM - 2:30 PM each day
Space is limited! To register, see the last page of this catalog or visit capitalelectriceducation.com
FEBRUARY 20 & 21, 2020THURSDAY & FRIDAYFalls Church, VA
FEBRUARY 6 & 7, 2020THURSDAY & FRIDAYBaltimore, MD
MARCH 19 & 20, 2020THURSDAY & FRIDAY Chesapeake, VA
APRIL 16 & 17, 2020THURSDAY & FRIDAY Cumberland, MD
APRIL 23 & 24, 2020THURSDAY & FRIDAY York, PA
12 capitalelectriceducation.com
TRANSFORMER INSTALLATION COURSEThis course is taught by Master Electricians and industry experts Wayne Robinson and Michael Robinson and is based on the 2017 National Electrical Code (NEC)
FEBRUARY 13 & 14, 2020Hagerstown, MD
APRIL 20 & 21, 2020Falls Church, VA
MAY 14 & 15, 2020Cumberland, MD
JUNE 11 & 12, 2020Chesapeake, VA
To register, see the last page of this catalog or visit capitalelectriceducation.com
$329 ea.
Sponsored by
This is a Two day Seminar!8:00 am - 2:30 pm each day unless otherwise noted.
This course qualifies for 10 Hours of CEU Credit!This course, based on the 2017 National Electrical Code (NEC), qualifies for up to 10 contact hours toward electrical continuing education credits (CEUs) in the following jurisdictions: State of
Delaware, State of Virginia (3 hrs), State of Maryland, and the following MD counties: Cecil (5 hrs), Harford,
Prince George’s, Queen Anne’s, and Wicomico.
Featuring a HANDS-ON demonstration of
wiring a transformer!
ThIS Course IS:• A comprehensive, yet easy-to-
understand, walkthrough of the electrical code as it applies to transformers
• A step-by-step explanation of how to properly install a transformer according to code
• The opportunity to learn from the experience and on-the-job lessons and challenges of other experienced electricians
• Access to an actual transformer showing how to terminate primary and secondary conductors and appropriate grounding requirements
• AND MORE!
13Capital Electric will not be held liable for typos or misprints. Capital Electric reserves the right to cancel or postpone these events at any time at its sole discretion.
Grounding & BondingWhat You’ll Learn:Grounding and Bonding covers the essential information needed by all workers who face electrical hazards. You’ll better understand the general requirements for grounding and bonding electrical installations, including:
• Understand Grounding and Bonding as outlined in NEC Article 250
• Essential differences, requirements, and exceptions to Grounding and Bonding procedures
• Definition of key terms, such as: bonded, grounded, equipment bonding jumper, main bonding jumper, system bonding jumper, grounded conductor, equipment grounding conductor and more
• Systems, circuits, and equipment required, permitted or not permitted to be grounded
• Types and sizes of grounding and bonding conductors and electrodes
• And much more!
How You’ll Benefit:• Gain a thorough understanding of grounding and bonding procedures and avoid
making simple mistakes on the job.
• Confidently assess grounding and bonding requirements of a job without getting tripped up over technical terms.
• Perform service installations quickly without compromising efficiency.
• Connect with an expert you can call if you’re in a situation where you need advice.
• Navigate potential violations and avoid the risk of failing an inspection (and losing time and money to correct it).
Who Should Attend?• Supervisors & Safety Managers
• Maintenance Personnel
• Engineers
• Electricians• Qualified Workers
2-Day Seminar! Thursday & Friday 8:00am–2:30pm
$349June 4 & 5, 2020 Falls Church, VA
June 18 & 19, 2020 Baltimore, MD
Aug. 6 & 7, 2020 Hagerstown, MD
Nov. 19 & 20, 2020 Eastern Shore, MD
Dec. 10 & 11, 2020 York, PA
10 Hours of CEU Credit This course, based on the National Electrical Code (NEC), qualifies for up to 10 contact hours toward electrical continuing education credits (CEUs) in the following jurisdictions: State of Delaware, State of Virginia (3 hrs), State of Maryland, and the following MD counties: Cecil (5 hrs), Harford, Prince George’s, Queen Anne’s, and Wicomico.
Sponsored by
To register, see the last page of this catalog or visit capitalelectriceducation.com
14 capitalelectriceducation.com
Master the Basic Concepts You Need to Excel as an Electrician with...
Capital Electric is not affiliated with the state of North Carolina or the NC Board of Examiners of Electrical Contractors. This course, when offered during fiscal year 2019, meets the requirements of the North Carolina State Board of Examiners of Electrical Contractors for 8 contact hours toward continuing education credit. This course is not sponsored by the Board.
WEDNESDAY, FEBRUARY 5, 2020Durham, NC
This course is approved for 8 hours toward continuing education in North Carolina by the NC State Board of Examiners of Electrical Contractors (NCBEEC)
8HOURS
THE NEC TODAY
An 8-hour seminar based on the 2017 National Electrical Code with
Instructor Don A. Hursey
Course Objectives:This course assists electrical apprentices, journeymen, contractors, engineers, inspectors, and maintenance personnel in understanding the changes of the 2017 National Electrical Code. 8 contact hours.
Course Materials:IAEI Analysis of Changes PowerPoint Presentation, Chapters 1-4. Based on the 2017 National Electrical Code (NEC).
Course Outline:This course will cover the 2017 edition of the National Electrical Code. The Instructor will review multiple NEC topics.
Articles covered include:110, 210, 230, 240, 250, and 300
Cost: $229
REGISTER TODAY!
To register, see the last page of this catalog or visit
capitalelectriceducation.com
Sponsored by
FEB05
TUESDAY, JUNE 9, 2020Greensboro, NC
JUN09
8:00 AM - 5:00 PM
15Capital Electric will not be held liable for typos or misprints. Capital Electric reserves the right to cancel or postpone these events at any time at its sole discretion.
8hours
This course is approved for 8 hours of continuing education in North Carolina by the NC State Board of Examiners of Electrical Contractors (NCBEEC)
2017 NEC Requirements for Grounding and Bonding is a one-day course designed to help you break down the dense topic of grounding and bonding according to the NEC Article 250 requirements and enable you to perform servicing and installations accurately and effectively.
8:00 AM - 5:00 PM
To register, see the back of this catalog or visit: capitalelectriceducation.com
Tuesday, April 28, 2020Charlotte, NC
Tuesday, March 17, 2020Durham, NC
Cost: $229 ea.
What you’ll Learn• Essential differences, requirements,
and exceptions to Grounding and Bonding procedures
• Systems, circuits, and equipment required, permitted or not permitted to be grounded
• Building or structures supplied by feeders or branch circuits
• And much more!
Grounding and Bondingwith Don Hursey
Discover the quickest and easiest way to get up-to-date on everything you need to know about grounding and bonding.
Sponsored by
16 capitalelectriceducation.com
capitalelectriceducation.com
NECReferences
Covered
• Definitions• Use and Identification of
Grounded Conductors• Branch Circuits• Grounding and Bonding• General Requirements for
Wiring Methods and Materials• Conductors for General Wiring• Cabinets, Cutout Boxes, and
Meter Socket Enclosures• Nonmetallic-Sheathed Cable:
Types NM, NMC, and NMS• Switches• Receptacles, Cord Connectors,
and Attachment Plugs (Caps)• Swimming Pools, Fountains,
and Similar Installations
This Course...
Covers the NEC requirements for wiring a dwelling and includes specific 2017 NEC changes that are related to residential wiring.
Is approved for 4 hours of continuing education in North Carolina by the NC State Board of Examiners of Electrical Contractors (NCBEEC).
with Don Hursey
WednesdayMarch 18
2020Durham,NC8am -12pm$75 ea.
To register, see the last page of this catalog or visit capitalelectriceducation.com
capitalelectriceducation.com
NECReferences
Covered
• Definitions• Use and Identification of
Grounded Conductors• Branch Circuits• Grounding and Bonding• General Requirements for
Wiring Methods and Materials• Conductors for General Wiring• Cabinets, Cutout Boxes, and
Meter Socket Enclosures• Nonmetallic-Sheathed Cable:
Types NM, NMC, and NMS• Switches• Receptacles, Cord Connectors,
and Attachment Plugs (Caps)• Swimming Pools, Fountains,
and Similar Installations
This Course...
Covers the NEC requirements for wiring a dwelling and includes specific 2017 NEC changes that are related to residential wiring.
Is approved for 4 hours of continuing education in North Carolina by the NC State Board of Examiners of Electrical Contractors (NCBEEC).
with Don Hursey
WednesdayMarch 18
2020Durham,NC8am -12pm$75 ea.
capitalelectriceducation.com
NECReferences
Covered
• Definitions• Use and Identification of
Grounded Conductors• Branch Circuits• Grounding and Bonding• General Requirements for
Wiring Methods and Materials• Conductors for General Wiring• Cabinets, Cutout Boxes, and
Meter Socket Enclosures• Nonmetallic-Sheathed Cable:
Types NM, NMC, and NMS• Switches• Receptacles, Cord Connectors,
and Attachment Plugs (Caps)• Swimming Pools, Fountains,
and Similar Installations
This Course...
Covers the NEC requirements for wiring a dwelling and includes specific 2017 NEC changes that are related to residential wiring.
Is approved for 4 hours of continuing education in North Carolina by the NC State Board of Examiners of Electrical Contractors (NCBEEC).
with Don Hursey
WednesdayMarch 18
2020Durham,NC8am -12pm$75 ea.
17Capital Electric will not be held liable for typos or misprints. Capital Electric reserves the right to cancel or postpone these events at any time at its sole discretion.
Wednesday, March 18th, 20201pm - 5pm • $75 ea.Durham, NC
This course covers the NEC requirements for an electrical service and it includes specific guidelines on how to achieve a code compliant installation.
NEC References Covered:• Definitions• Requirements for
Electrical Installations• Services
• Overcurrent Protection• Service-Entrance Cable: Types SE and USE• Switchboards, Switchgear, and Panelboards
Installation and Inspection of Services Course This course is approved for 4 hours of
continuing education in North Carolina by the NC State Board of Examiners of Electrical Contractors (NCBEEC).
This course is taught by instructor Don Hursey and is based on the 2017 National Electrical Code (NEC)
capitalelectriceducation.com
To register, see the last page of this catalog or visit capitalelectriceducation.com
18 capitalelectriceducation.com
Transformer Installation CourseThis course is taught by instructor Don Hursey and is based on the 2017 National Electrical Code (NEC)
TUESDAY, MAY 12, 2020
COST: $199/PERSON
YOU’LL RECEIVE:A comprehensive, yet easy-to-understand, walkthrough of the electrical code as it applies to transformers
A step-by-step explanation of how to properly install a transformer according to code
The opportunity to learn from the experience and on-the-job lessons and challenges of other experienced electricians who are participating in the training
Durham, NC
8:00 AM - 5:00 PM
To register, see the last page of this catalog or visit capitalelectriceducation.com
No other course delivers such a detailed explanation of code-compliant transformer installation – or gives you a close look at an actual, properly installed transformer.
19Capital Electric will not be held liable for typos or misprints. Capital Electric reserves the right to cancel or postpone these events at any time at its sole discretion.
NFPA Public Education Division • 1 Batterymarch Park, Quincy, MA 02169Your Source for SAFETY Information
www.nfpa.org/education
Generator Generator
Just Remember...
Downed utility lines, power company blackouts, heavy snow falls or summer storms can all lead to power outages. Many people turn toa portable generator for a temporary solution without knowingthe risks.
FACT• CO deaths associated with
generators have spiked in recent years as generator sales have risen.
!
SafetySafety
When plugging in appliances, make sure they are plugged directly into the generator or a heavy duty outdoor-rated extension cord. The cords should be checked for cuts, tears and that the plug has all three prongs, especially a grounding pin.
If you must connect the generator to the house wiring to power appliances, have a qualified electrician install a properly rated transfer switch in accordance with the National Electrical Code® (NEC) and all applicable state and local electrical codes.
KKK Store fuel for the generator in a container that is intended for the purpose and is correctly labeled as such. Store the containers outside of
living areas.
KKK Generators should be used in well ventilated locations outside away from all doors, windows and vent openings.
KKK Never use a generator in an attached garage, even with the door open.
KKK Place generators so that exhaust fumes can’t enter the home through windows, doors or other openings in the building.
KKK Make sure to install carbon monoxide (CO) alarms in your home. Follow manufacturer’s instructions for correct placement and mounting height.
KKK Turn off generators and let them cool down before refueling. Never refuel a generator while it is hot.
NFPA Public Education Division • 1 Batterymarch Park, Quincy, MA 02169Your Source for SAFETY Information
www.nfpa.org/education
Generator Generator
Just Remember...
Downed utility lines, power company blackouts, heavy snow falls or summer storms can all lead to power outages. Many people turn toa portable generator for a temporary solution without knowingthe risks.
FACT• CO deaths associated with
generators have spiked in recent years as generator sales have risen.
!
SafetySafety
When plugging in appliances, make sure they are plugged directly into the generator or a heavy duty outdoor-rated extension cord. The cords should be checked for cuts, tears and that the plug has all three prongs, especially a grounding pin.
If you must connect the generator to the house wiring to power appliances, have a qualified electrician install a properly rated transfer switch in accordance with the National Electrical Code® (NEC) and all applicable state and local electrical codes.
KKK Store fuel for the generator in a container that is intended for the purpose and is correctly labeled as such. Store the containers outside of
living areas.
KKK Generators should be used in well ventilated locations outside away from all doors, windows and vent openings.
KKK Never use a generator in an attached garage, even with the door open.
KKK Place generators so that exhaust fumes can’t enter the home through windows, doors or other openings in the building.
KKK Make sure to install carbon monoxide (CO) alarms in your home. Follow manufacturer’s instructions for correct placement and mounting height.
KKK Turn off generators and let them cool down before refueling. Never refuel a generator while it is hot.
20 capitalelectriceducation.com
Headquarters: 8511 Pepco Place, Upper Marlboro, MD 20772800-527-1051
About On-Site TrainingOn-site classes require a 10-person minimum in order to run and are subject to instructor availability. Prices may vary based on location and other factors. For more information on what we can do for your career advancement and knowledge, email [email protected] or call us at 301-909-6511.
Customers now have the ability to
schedule group training sessions to be held at
your convenience. Put on a class for your associates,
or get together with co-workers and friends in the industry
to take advantage of an opportunity to
advance your career!
Advance your Organization with
On-Site Seminars
through Capital Electric!
21Capital Electric will not be held liable for typos or misprints. Capital Electric reserves the right to cancel or postpone these events at any time at its sole discretion.
A 220,000 Square Foot State-of-the-Art Distribution Center featuring the latest in warehouse technology, receiving and shipment capabilities, accurate on-time order delivery
Millions of dollars in current inventories
Thousands of items in stock every day
Outstanding fill rate accuracy and service levels
Representing hundreds of manufacturers representing the electrical industry
State-of-the-Art wire paralleling facilities
Next day delivery
3,000 Square Foot Full Service counter and Will Call on site
Centralized Commercial Projects Department specializing in Power Distribution and Lighting
Outstanding training facility featuring State-of-the-Art computer and audio/visual capabilities. This facility is available for use by Capital Electric customers for their company meetings, training activities and other events at no charge to them (Subject to availability)
8511 Pepco Place | Upper Marlboro, MD 20772Phone: 301-909-6500 Fax: 301-735-8140
Corporate Office Hours: Monday – Friday 8:00 AM – 5:00 PM
Central DistributionCenter Fact Sheet
Conveniently located less than ½ mile from the Capital Beltway(Interstate 495) and Pennsylvania Ave (Route 4) interchange
capitalelectricsupply.com
22 capitalelectriceducation.com
18
70
70
80
80 80
81
95
64
81
81
85
68
70
83
95
64
68
77
79
79
15 916
26
40
40
40
77
77
85
85
95
95
56
59
54
E2
55
16
20
575
75
75
85
75
64
52
20
20
26
85
26
385
77
95
95
26
95
60
66
67
28
29 30
8
Pennsylvania1. Chambersburg2. Gettysburg3. Hanover4. Lancaster5. McConnellsburg*6. Mechanicsburg7. York
Maryland8. Annapolis9. Baltimore10. Beltsville11. Chestertown12. Columbia13. Cumberland14. Frederick15. Gaithersburg16. Glen Burnie17. Golden Ring18. Hagerstown19. Havre de Grace20. Ocean Pines21. Salisbury22. Timonium23. Upper Marlboro24. Westminster25. White Plains
Virginia26. Alexandria27. Ashland28. Blacksburg29. Charlottesville30. Charlottesville31. Chesapeake32. Colonial Heights33. Fairfax34. Fishersville35. Fredericksburg36. Goochland
Virginia Cont’d37. Harrisonburg38. Manassas39. Midlothian40. Newport News41. Norfolk42. Oyster Point43. Richmond44. Richmond45. Sterling46. Virginia Beach47. Virginia Beach48. Williamsburg49. Winchester50. Woodbridge
West Virginia51. Martinsburg
North Carolina52. Charlotte53. Durham54. Fayetteville55. Gastonia56. Greensboro57. Hickory58. Mooresville59. Raleigh
South Carolina60. Anderson61. Bluffton (Hilton Head)62. Charleston63. Columbia64. Moncks Corner65. Myrtle Beach
Georgia66. Augusta67. Savannah
Capital ElectricCounter Locations
9
10
1112
13
1417
2418 19
2021
22
23
25
45
53
1
2 3
4
6
5 7
62
64
65
26
27
31
32
33
34
35
4336
44
37
38
494042
41
39
46
47
48
49
50
51
VIRGINIA
MARYLAND
PENNSYLVANIA
WESTVIRGINIA
NORTHCAROLINA
SOUTHCAROLINA
GEORGIA
5758
61
North CarolinaE1. CharlotteE2. GreensboroE3. Raleigh
Ensco Counter Locations
E1
E3
63GEORGIA
*sales office only
20190719
Capital Electric (formerly CapitalTristate / Eck Supply) Location Map
capitalelectricsupply.com
23Capital Electric will not be held liable for typos or misprints. Capital Electric reserves the right to cancel or postpone these events at any time at its sole discretion.
Company Name _______________________________________________________________________________________________
Address _______________________________________________________________________________________________
Phone __________________________________________ Fax _________________________________________________
Attendee #1 Name _________________________________________ Email ______________________________________________
Attendee #2 Name _________________________________________ Email ______________________________________________
Attendee #3 Name _________________________________________ Email ______________________________________________
Attendee #4 Name _________________________________________ Email ______________________________________________
Method of Payment (Payment is required to secure your spot):
____ Check # _______________ (Payable to Capital Electric; mail to address below)
____ Credit Card (Visa, Amex, MC)
Name on Card _____________________________________________ CC# ________________________________________________
Security Code _____________________________________________ Exp Date _____________________________________________
Billing Address _____________________________________________ Signature ____________________________________________
_____________________________________________
____ OR authorize payment with your Capital Electric Commercial Account.
Capital Electric Account# _______________________ PO#______________ Signature _______________________________________
3 Easy Ways To Register:1. ONLINE at capitalelectriceducation.com2. FAX completed registration form to (301) 735-6279 3. MAIL your registration to Capital Electric,
Attn: Marketing Dept, 8511 Pepco Place, Upper Marlboro, MD 20772
ITEM QUANTITY FEE TOTAL
Please reserve the following number of seats x $TUITION SUBTOTAL
I am sending 3+ employees. Please give me the team discount. – 10% off tuition subtotal – $
NEC Code Books, softbound Please check: q 2017 q 2020 x $89 + $NFPA NEC Handbook Please check: q 2017 q 2020 x $164 + $NEC Tabs Please check: q 2017 q 2020 x $16 + $
MY TOTAL INVESTMENT $
TC-20201220
8511 Pepco Place, Upper Marlboro, MD 20772Phone Number: 301-909-6511 • Fax: 301-735-6279
Email: [email protected]
REGISTRATION FORM
Please issue payment at time of registration in order to secure spot in seminar. Cancellations or rescheduling must be received at least 7 days in advance prior to the start of the seminar/event in order to receive a full refund or credit. No-shows and/or cancellations received after this deadline will be billed and are non-refundable.
For questions regarding this seminar, please contact Amanda Sockriter at (301) 909-6511 or [email protected]
Course Title _____________________________________________________________________________________________
Session Date _____________________________________________________________________________________________
Session Location _____________________________________________________________________________________________
20190124
Capital Electric thanks our educational sponsor!
Visit us at capitalelectriceducation.com for the latest in course offerings and events!
Follow us on Social Media!