Specia l istAPPLICATION MATTING
www.plastexmatting.com
73
Introduction 74
International applications 75
Crossgrip 76 - 77
Herongripa 78
Zed Land - ESD 79
Photoluminescent Floorline 80
HVD 81
Pillomat 82
PillogriD 83
Ancillaries 84
R
www. .be
Westkaai 7 2170 Merksem - Antwerpen
Tél. 03 646 99 60 - Fax 03 646 00 25e-mail : [email protected]
Why specialist matting?
Over our 45 years in business customers have often asked our research and developmentteam to design a product to meet a specific need. We’ve included the specialist products weare most often asked for in our range, and they’re listed in this section. If you don’t see whatyou need, call us. As a manufacturer we could make a bespoke product just for yourapplication.
74
Crossgrip
Slip resistant and selfdraining high level mattingfor safe access in allweathers and roofmembrane protection.
PhotoluminescentFloorline
Escape route matting witha light emitting strip tomark escape routes iflighting fails.
HVD
Smooth yet hardwearingwith good cushioning &drainage properties. Idealin veterinary applications.
Pillomat
Lightweight, hygieniccushioned matting suitablefor bench tops, workingsurfaces and shelving.Impact, chemical, oil andacid resistant.
PillogriD
Large space hollow tubefor maximum cushioningand drainage.
Herongripa
Animal fat resistant, anti-fatigue and slip resistantmatting ideal for the foodprocessing industry.
Zedland ESD
Superior quality, patentedfoam matting for standingareas in static sensitiveenvironments.
75
Specialised solutions
A m a t f o r a l l r e a s o n s
PRODUCT HEIGHT mm (in) LENGTH m (ft) WIDTH OPTIONS cm (ft)
Crossgrip 14 (9/16”) 10 (33’) 60 (2’) 91 (3’) 122 (4’)
Product Code CROWEIGHT 6.6 kg/m2
OVERALLHEIGHT14 mm
1.3 lbs/sft
9/16“
Standard colours
LIGHT GREY BLACK
76
For ancillary range see page 84
www.crossgrip.com
C R O S S G R I P
Roof walkway matting for all weather safe access
Impervious to all weather conditions, Crossgrip high levelwalkway matting is down to earth when it comes tofunctionality. A non-porous PVC with cross directionaltop ribs and a ‘diamond cut’ surface for a firm underfootgrip, Crossgrip provides safe access whilst protecting theroof membrane below from damage.
Once installed, Crossgrip remains stable in winds up to94 mph/150 km/h, however if winds exceed 95 mph
the matting should be secured with connectingloops.
77
TH
EM
AI
N
BE N E F I T S
Permanent slip resistance
Continuous high level access
Protects roof membranesfrom pedestrian traffic
Loose lay yet stable in high winds
Completely maintenance free
Compatible with various roof membranes,self-draining where water collects andresistant to bacteria, Crossgrip equals thelife of most modern roofing materials.
Developed by Plastex primarily for the foodprocessing industry, Herongripa is aspecialised matting solution, which isresistant to animal fat deposits. It is madefrom an exceptionally hardwearing vinyl in rollformat with a wide spaced open grid formatto allow waste and by-products to fallthrough. A feature which keeps the floor freeof slippery and potentially hazardous matterwhile being easy to clean.It’s the ideal product for safety and comfort instanding areas of food processing.
Animal fat resistantmatting
Slip resistant and hygienic
Animal fatresistant
Efficient fluid and waste drainage
Roll formatensures minimumof seams
TH
EM
AI
N
BE N E F I T S
0.82 lbs/sft
5/8“
For ancillary range see page 84
Standard colour
TERRACOTTA
78
H E R O N G R I P A
Anti-bacteria and anti-fungal additives
Product Code HGA
PRODUCT HEIGHT mm (in) LENGTH m (ft) WIDTH OPTIONS cm (ft)
Herongripa 15 (5/8”) 5 (16’6”) 60 (2’) 91 (3’) 122 (4’)
Herongripa 15 (5/8”) 10 (33’) 60 (3’) 91 (3’) 122 (4’)
Anti-fatigue benefits are coupled with ESD
protection in a superior quality, patented foam
matting with built in ‘bounce’ to provide
added underfoot comfort in standing areas
of static sensitive environments. It is
hardwearing and dissipates noise effectively
too.
ESD anti-fatiguematting
TH
EM
AI
N
BE N E F I T S
For ancillary range see page 84
OVERALLHEIGHT9 mm
WEIGHT 3.3 kg/m2
0.7 lbs/sft
3/8“
Standard colours
BLUE DARK GREY
79
Z E D L A N D
Extra safetycharacteristics
Fatigue reducingand comfort
ESD protection
Componentprotection
Wearresistant
ESD Earthing Leadused for ‘earthing’ smaller mats
Product Code ZLD
PRODUCT HEIGHT mm (in) SIZE OPTIONS cm (ft)
Zed Land modules 9 (3/8”) 60 x 91 (2’ x 3’) 91 x 150 (3’ x 5’) 91 x 300 (3’ x 10’)
Zed Land roll 9 (3/8”) 18m x 91cm (60’ x 3’)
ESD Screw Fit Earthing Lead 4.5m length (14’9”)
Manufactured to the same specification as
Floorline and incorporating a photoluminescent
strip, this light emitting band marks escape
routes if lighting fails. Floorline
Photoluminescent is tested to DIN 67510 Part
4 after glow properties (15.5/1.65-239/ w-k)
and is especially suitable for open grid and metal
checker plate surfaces.
Photoluminescent escaperoute marking band
Open grid roll format
Extra safety characteristics
Slip resistantcushioned surface
TH
EM
AI
N
BE N E F I T S
F L O O R L I N E
Standard colours
RED OR BLACK WITH PHOTOLUMINESCENT CENTRE STRIP
0.76 lbs/sft
1/4“
P H O T O L U M I N E S C E N T
80
Loose lay - lighterweight construction
PRODUCT HEIGHT mm (in) LENGTH m (ft) WIDTH OPTIONS cm (ft)
Photoluminescent Floorline 6 (1/4”) 10 (33’) 60 (2’) 91 (3’)
Product Code FLN-PL
A soft, smooth surfaced yet hardwearing vinyl,with an excellent combination of hygienicbenefits, HVD is a top performer wherecomfort and cleanliness count. The smoothnon porous top surface is easy to clean,making it an ideal lining for animal cages inveterinary surgeries and kennels.
Heron Vinyl Duckboard
Hygienic, non-porousconstruction
Smoothtop surface
Ideal animalcage lining
TH
EM
AI
N
BE N E F I T S
H V D
Easy to mopclean
OVERALLHEIGHT13 mm
WEIGHT 6.9 kg/m2
1.4 lbs/sft
1/2“
Standard colour
BLACK
For ancillary range see page 84
81
PRODUCT HEIGHT mm (in) LENGTH m (ft) WIDTH OPTIONS cm (ft)
HVD 13 (1/2”) 10 (33’) 60 (2’) 91 (3’) 122 (4’)
Product Code: HVD
All purposecushion matting
Pillomat is an all purpose, lightweight
cushioned matting ideal for covering work
and storage surfaces. Its tubular
construction and open grid format combine
to give a soft surface with continuous airflow
and automatic drainage.
Pillomat’s impact resistance is a bonus
wherever delicate components and tools are
stored or handled, as it is an easy to clean and
contaminant resistant surface in food-handling
areas.
T H E M AI N
B
EN
EF
IT
S
P I L L O M A T
1282
Excellentcomponent protection
Hygienicand easy toclean
Roll format for onepiece coverage
Lightweighttubularconstruction
Chemical, oil and acid resistance
0.5 lbs/sft 5/16“
Standard colours
GREEN WHITE
BEIGEMAHOGANY
PRODUCT HEIGHT mm (in) LENGTH m (ft) WIDTH OPTIONS cm (ft)
Pillomat 8 (5/16”) 10 (33’) 60 (2’) 91 (3’)
Product Code: PMT
Hollow profile drainagegrid with cushioning
Purpose designed for wave simulators/surfing
machines, the large open grid and soft vinyl
of PillogriD combines phenomenal drainage
with a soft landing. Large roll format further
adds to safety by removing the need for joints
in action areas.
Standard colours
BLUEBLACK
Soft vinylconstruction
High volumedrainage
‘D’ profile for maximumweld strength
Hollow tube cushioning format
Supplied in rolls orfabricated panels
TH
EM
AI
N
BE N E F I T S
OVERALLHEIGHT21 mmWEIGHT
7.1 kg/m2
1.45 lbs/sft13/16“
P I L L O G R I D
83
For ancillary range see page 84
PRODUCT HEIGHT mm (in) LENGTH m (ft) WIDTH OPTIONS cm (ft)
PillogriD 21 (13/16”) 5(16’6”) 10(33’) 91 (3’) 100 (3’3”)
Product Code: PMG
84
Specialist matting ancillaries
PRODUCT E D G I N G S T R I P S
PRODUCT C O N N E C TO R C L I P S F L O O R H O O K S
Flexible PVCramped edgingfor surfacemountedapplications
Floor HooksFor securing sections of matting to floor
Connector ClipsFor joining sections of matting together
CROSSGRIP
HERONGRIPA
HVD
CROSSGRIP
HVD
Flexible PVC edging roll Flexible PVC edging roll
Dual Purpose Side to end Snap Track 2 part strip
Small Large
Supplied in packs of 10
VYN/CCSE
Supplied in packs of 10 with screws and plugs
FHK/L
Ancillary part ordering codes shown in italics. Power shears and secateurs are also available for cutting matting to size and shape. See price list separate for details.
www.plastexmatting.com for technical specifications
Aluminium section
PRODUCT E D G I N G S T R I P P R E F A B R I C AT I O N
PILLOGRID
ZEDLAND ESD
Supplied in packsof 10 with screws & plugs
VYN/FHK
Aluminium section
We also have ability to
manufacture bespoke sizes and
locally fabricate large panels to
clients’ specifications.
ESD Screw Fit Earthing lead, in 4.5m (14’9”) lengths ESD/LEAD
14 mm(9/16”)
60 mm (2 1/2”)
14 mm(9/16”)
100 mm (3 3/4”)
60mm (2 1/2”) x 10.1m (33’ ) length with welding paste
Colours: Dark Grey EDGE/6-GBlack EDGE/6-BDark Brown EDGE/6-BRNOxford Blue EDGE/6-OBLHolly Green EDGE/6-GNHYellow EDGE/6-Y
100mm (3 3/4”) x 10.1m (33’ )with welding paste
Colours: Dark Grey EDGE/CYellow EDGE/YBlack EDGE/BLK
45mm (1 13/16”) x 2m (6’6”) length with fixing screws and plugs
Colours: Anodised AluminiumEDGE/ALU
Powder Coated YellowEDGE/YEC
15 mm(9/16”)
45 mm (1 13/16”)
Welding paste includedColour: Dark GreyStandard lengths 2.5m (8’2”) ST/RHLow Profile 1.8m (5’11”) ST/LP
22 mm(7/8”)
55mm (2 1/2”) x 2m (6’6”) length with fixing screws and plugs
Colour: Anodised AluminiumEDGE/20
55 mm(2 1/2”)
Supplied in packs of 10
CCDP
Product Index
85
Crossgrip 76
Eco Coin 65
Eco Dot 64
Eco Dot Extra 64
Firmagrip 15
Flexi Button 66
Flexi Coin 65
Flexi Dot 64
Flexi Dot Extra 64
Flexi Line 68
Flexi Ridge 69
Flexi Tred 67
Flexigrid 14
Floorline - workplace 12
Floorline - wetside 36
Frontrunner Entry 46
Frontrunner Low Profile 48
Frontrunner XT 49
Frontrunner Brush 50
Frontrunner Brush Wide 51
Frontrunner Plus 52
Frontrunner Plus Low Profile 54
Frontrunner Logos 55
Frontrunner Insert Colours 56
Frontrunner Modules 58
Grip Rock 17
Heronair 10
Herongripa - workplace 16
Herongripa - specialist 78
Heronrib 34
Herontile 37
Herontred 38
HVD 81
Photoluminescent Floorline 80
PillogriD 83
Pillomat 82
Plastex Grid 70
Rubbagrid - Open 13
Rubbagrid - Solid 29
Rubbagrid Solid & Open 71
Spark Safe 28
Tuff Spun 22
Tuff Spun Deck 25
Tuff Spun Plus 22
Tuff Spun Wear 24
Vynagrip 8
Zed Chex 27
Zed Land 23
Zed Land - ESD 79
Zed Tred 26
When you buy from Plastex you buywith the confidence of knowing we havebeen designing and manufacturingmatting for a diverse range of uses forover 45 years.
We even design and build the machineswe use for making matting
This heritage means we are uniquelyplaced to provide you with matting thatwill provide real benefits to yourbusiness, with a range of stylish productsthat will improve the productivity, safetyand the look of any environment.
We make our matting - which makes all the difference
Full manufacturer warranty - anothergood reason to choose Plastex
‘ tell us what you need...and we’ll make it ’
At Plastex we realise not every flooring need can be solved by an off thepeg solution. As EU & USA manufacturers we are here to help, as we candesign and manufacture a product to your exact specification.
If you follow our simple fitting and maintenance instructions, all Plastexflooring and matting will give excellent and long service. But for extrapeace of mind, and in the unlikely event of a Plastex product being faulty,we offer a full refund or replace warranty. The warranty periods varydepending on the product, you can find full terms and details at www.plastexmatting.com/matfax/doc.php?doc_id=167&action=inline
Ensure you have been supplied with a genuine Plastex product.
By choosing Plastex you’re benefiting from our extensive know how that comes fromover 45 years of designing, testing and making matting for an extensive range ofcustomers and reasons.
Since July 2010, we have been embossing the trade marked names on the undersideof our grid matting.
The programme began with Vynagrip and is being extended to include all duallayer grid rolls manufactured in the UK and USA. In addition to the roll outperiod, there will be a time lag in the supply chain, so if you have any doubt thatyou’ve been supplied a genuine Plastex mat, where you cannot seethe trademark on the underside, ask yourdistributor to get us to confirm it.
Plastex Matting Inc.
120 55th Street NE, Fort Payne, AL 35967 USATel: 256 845 7725 Fax: 256 845 6786
www.plastexmatting.com
Plastic Extruders Ltd.
Russell Gardens, Wickford, Essex SS11 8DN, EnglandTel: 01268 571116 Fax: 01268 560027
www.plastex.co.uk
