Car Parking Report

8/9/2019 Car Parking Report

1/202

CONTENTS

Introduction

Material

Design data

Load

Staad Reactions

Foundation Design

Flat Slab Design

ANNNEXURES

STAAD file for Extended Car Parking

B Geotechnical Data

A

7.0

1.0

KACST-Extended Car Parking- Preliminary Design Report

2.0

3.0

4.0

5.0

6.0


2/202

Introduction

This calculation report pertains to the design of open foundation for KACST-Extended Car Parking,

which has two basements namely CP2, CP1 below the Gantry/Ground level. Geotechnical Data

corresponding to adjacent site (KACST Head Quarter Building-200), shows that the net allowable

bearing capacity is 800 kN/m2 (Refer Appendix-C). The column arrangement and all relevant data

for structural model has been taken from Architectural drawings.

Staad. Pro has been used for Modelling & Analysis and standard excel sheets has been used

for designing Isolated foundation. Refer Appendix‐A for Staad Input file.

Material

Grade of Concrete for foundation = C

Reinforcement = (Grade 60)Modulus of elasticity of steel = N/mm

2

Design data

Column Size = 750 (mm) x 750 (mm)

CP1 level slab = mm

Gantry/Ground Level slab = mm

Plinth Beam = 450 x 600 mm

***Plinth beam is an additional structural entity to improve serviceability, it is not

the part of foundation (Not a Grade Beam).

Loads: As per ACI / Saudi Bu ilding Code

1) Dead Load (DL) (self weight)

2) Super Imposed Dead Load (SDL):

a) Ground Floor Level = kN/m2

b) CP1 Level = kN/m2

3) Live Load (LL) :

a) Ground Floor Level = 5 kN/m2

b) CP1 Level = 5 kN/m2

4) Load Combinat ion :

a) 1.4 (DL+SDL)

b) 1.2(DL+SDL)+1.6(LL)

5.7

2.65

(Screed 0.1m, Hard scaping 0.15m,

Services)

1.0

Fy 420

4.0

490

390

2.0E+05

3.0

2.0

35


3/202

Staad Reactions:

Fig. 1 showing support Numbers from staad pro.

5.0


4/202

Force‐X Force‐Y Force‐Z Moment‐X Moment‐Y Moment‐Z

kN kN kN kN‐m kN‐m kN‐m

589 1 DL 14.81 1350.27 13.79 2.48 0.00 ‐7.82

2 SDL 0.56 463.67 0.34 1.60 0.00 ‐2.89

3 LL 1.14 556.74 0.71 3.64 0.00 ‐6.49

4 1.4(DL+SDL) 21.51 2539.51 19.78 5.71 ‐0.01 ‐14.99

5 1.2(DL+SDL)+1.6(LL) 20.27 3067.52 18.09 10.72 ‐

0.01 ‐

23.24590 1 DL 15.15 1572.41 ‐1.09 ‐1.29 0.01 ‐10.16

2 SDL 0.66 541.12 0.86 0.69 0.00 ‐3.47

3 LL 1.33 647.84 1.96 1.51 0.01 ‐7.80

4 1.4(DL+SDL) 22.13 2958.95 ‐0.32 ‐0.84 0.02 ‐19.08

5 1.2(DL+SDL)+1.6(LL) 21.09 3572.78 2.86 1.69 0.03 ‐28.83

591 1 DL 15.06 1547.04 ‐0.51 ‐0.44 0.00 ‐9.90

2 SDL 0.64 530.84 0.20 0.21 0.00 ‐3.41

3 LL 1.28 636.13 0.43 0.45 0.00 ‐7.65

4 1.4(DL+SDL) 21.97 2909.02 ‐0.44 ‐0.33 ‐0.01 ‐18.64

5 1.2(DL+SDL)+1.6(LL) 20.88 3511.26 0.31 0.44 ‐0.01 ‐28.22

592 1 DL 15.07 1549.26 ‐0.14 ‐0.13 0.00 ‐9.92

2 SDL 0.64 531.78 0.07 0.07 0.00 ‐3.41

3 LL 1.28 637.16 0.16 0.15 0.00 ‐7.66

4 1.4(DL+SDL) 21.98 2913.45 ‐0.09 ‐0.08 0.00 ‐18.67

5 1.2(DL+SDL)+1.6(LL) 20.90 3516.70 0.18 0.17 0.00 ‐28.26

593 1 DL 15.07 1549.07 ‐0.05 ‐0.04 0.00 ‐9.92

2 SDL 0.64 531.69 0.02 0.03 0.00 ‐3.41

3 LL 1.28 637.08 0.05 0.05 0.00 ‐7.66

4 1.4(DL+SDL) 21.98 2913.07 ‐0.03 ‐0.02 0.00 ‐18.67

5 1.2(DL+SDL)+1.6(LL) 20.89 3516.24 0.06 0.06 0.00 ‐28.26

594 1 DL 15.07 1549.08 ‐

0.01 ‐

0.01 0.00 ‐

9.92

2 SDL 0.64 531.70 0.01 0.01 0.00 ‐3.41

3 LL 1.28 637.09 0.02 0.02 0.00 ‐7.66

4 1.4(DL+SDL) 21.98 2913.10 ‐0.01 0.00 0.00 ‐18.67

5 1.2(DL+SDL)+1.6(LL) 20.89 3516.28 0.02 0.03 0.00 ‐28.26

595 1 DL 15.07 1549.08 0.00 0.00 0.00 ‐9.92

2 SDL 0.64 531.70 0.00 0.00 0.00 ‐3.41

3 LL 1.28 637.08 0.01 0.01 0.00 ‐7.66

4 1.4(DL+SDL) 21.98 2913.09 0.00 0.00 0.00 ‐18.67

5 1.2(DL+SDL)+1.6(LL) 20.89 3516.27 0.01 0.01 0.00 ‐28.26

596 1 DL 15.07 1549.09 0.00 0.00 0.00 ‐

9.922 SDL 0.64 531.70 0.00 0.00 0.00 ‐3.41

3 LL 1.28 637.09 0.00 0.00 0.00 ‐7.66

4 1.4(DL+SDL) 21.98 2913.11 0.00 0.00 0.00 ‐18.67

5 1.2(DL+SDL)+1.6(LL) 20.89 3516.29 0.00 0.00 0.00 ‐28.26

597 1 DL 15.07 1549.09 0.00 0.00 0.00 ‐9.92

2 SDL 0.64 531.70 0.00 0.00 0.00 ‐3.41

3 LL 1.28 637.09 0.00 0.00 0.00 ‐7.66

4 1.4(DL+SDL) 21.98 2913.11 ‐0.01 ‐0.01 0.00 ‐18.67

5 1.2(DL+SDL)+1.6(LL) 20.89 3516.29 ‐0.01 ‐0.01 0.00 ‐28.26

598 1 DL 15.07 1549.08 0.00 0.00 0.00 ‐9.92

2 SDL 0.64 531.70 ‐0.01 ‐0.01 0.00 ‐3.41

3 LL 1.28 637.08 ‐0.01 ‐0.01 0.00 ‐7.66

4 1.4(DL+SDL) 21.98 2913.09 ‐0.01 ‐0.01 0.00 ‐18.67

Node Load Combination


5/202


kN kN kN kN‐m kN‐m kN‐mNode Load Combination

5 1.2(DL+SDL)+1.6(LL) 20.89 3516.27 ‐0.02 ‐0.03 0.00 ‐28.26

599 1 DL 15.07 1549.08 ‐0.01 ‐0.01 0.00 ‐9.92

2 SDL 0.64 531.70 ‐0.01 ‐0.01 0.00 ‐3.41

3 LL 1.28 637.09 ‐0.03 ‐0.03 0.00 ‐7.66

4 1.4(DL+SDL) 21.98 2913.10 ‐

0.03 ‐

0.03 0.00 ‐

18.675 1.2(DL+SDL)+1.6(LL) 20.89 3516.28 ‐0.07 ‐0.07 0.00 ‐28.26

600 1 DL 15.07 1549.05 ‐0.01 ‐0.02 0.00 ‐9.92

2 SDL 0.64 531.69 ‐0.04 ‐0.04 0.00 ‐3.41

3 LL 1.28 637.07 ‐0.08 ‐0.08 0.00 ‐7.66

4 1.4(DL+SDL) 21.98 2913.04 ‐0.07 ‐0.08 0.00 ‐18.67

5 1.2(DL+SDL)+1.6(LL) 20.89 3516.20 ‐0.19 ‐0.20 0.00 ‐28.26

601 1 DL 15.07 1549.27 ‐0.04 ‐0.04 0.00 ‐9.92

2 SDL 0.64 531.78 ‐0.11 ‐0.11 0.00 ‐3.41

3 LL 1.28 637.17 ‐0.26 ‐0.24 0.00 ‐7.66

4 1.4(DL+SDL) 21.98 2913.48 ‐0.21 ‐0.21 0.00 ‐18.67

5 1.2(DL+SDL)+1.6(LL) 20.90 3516.73 ‐0.59 ‐0.57 0.00 ‐28.26

602 1 DL 15.06 1546.44 0.03 ‐0.06 0.01 ‐9.89

2 SDL 0.64 530.59 ‐0.33 ‐0.33 0.00 ‐3.41

3 LL 1.28 635.86 ‐0.69 ‐0.72 0.00 ‐7.65

4 1.4(DL+SDL) 21.97 2907.84 ‐0.42 ‐0.54 0.01 ‐18.63

5 1.2(DL+SDL)+1.6(LL) 20.87 3509.81 ‐1.46 ‐1.61 0.02 ‐28.20

603 1 DL 15.19 1581.53 ‐0.99 ‐0.36 ‐0.02 ‐10.25

2 SDL 0.67 544.79 ‐1.38 ‐1.11 ‐0.01 ‐3.49

3 LL 1.35 652.07 ‐3.11 ‐2.42 ‐0.01 ‐7.86

4 1.4(DL+SDL) 22.20 2976.84 ‐3.32 ‐2.06 ‐0.04 ‐19.25

5 1.2(DL+SDL)+1.6(LL) 21.19 3594.89 ‐

7.83 ‐

5.64 ‐

0.05 ‐

29.06

604 1 DL 14.55 1217.95 ‐14.61 ‐6.37 0.00 ‐6.31

2 SDL 0.49 411.15 ‐0.55 ‐2.56 0.00 ‐2.50

3 LL 1.00 493.74 ‐1.16 ‐5.81 0.00 ‐5.66

4 1.4(DL+SDL) 21.05 2280.75 ‐21.22 ‐12.51 0.00 ‐12.34

5 1.2(DL+SDL)+1.6(LL) 19.65 2744.92 ‐20.05 ‐20.01 0.00 ‐19.62

1797 1 DL 1.74 1753.86 14.28 5.26 ‐0.02 ‐0.80

2 SDL 1.43 613.18 0.48 2.31 ‐0.01 ‐1.10

3 LL 3.24 734.27 0.98 5.21 ‐0.01 ‐2.38

4 1.4(DL+SDL) 4.44 3313.85 20.66 10.60 ‐0.03 ‐2.66

5 1.2(DL+SDL)+1.6(LL) 8.99 4015.27 19.28 17.42 ‐

0.04 ‐

6.081798 1 DL 3.06 2043.65 0.46 ‐0.26 0.00 ‐1.55

2 SDL 1.75 717.91 1.25 0.97 0.00 ‐1.30

3 LL 3.99 857.52 2.83 2.08 0.00 ‐2.79

4 1.4(DL+SDL) 6.73 3866.19 2.39 1.00 0.00 ‐3.99

5 1.2(DL+SDL)+1.6(LL) 12.16 4685.91 6.57 4.19 0.00 ‐7.89

1799 1 DL 2.97 1994.63 ‐0.27 ‐0.15 0.00 ‐1.44

2 SDL 1.72 697.90 0.27 0.29 0.00 ‐1.27

3 LL 3.94 834.81 0.56 0.61 0.00 ‐2.73

4 1.4(DL+SDL) 6.56 3769.54 0.00 0.20 0.00 ‐3.80

5 1.2(DL+SDL)+1.6(LL) 11.92 4566.74 0.89 1.15 0.00 ‐7.62

1800 1 DL 2.97 1999.72 ‐0.03 ‐0.02 0.00 ‐1.45

2 SDL 1.72 700.05 0.10 0.11 0.00 ‐1.28

3 LL 3.94 837.16 0.23 0.22 0.00 ‐2.73


6/202



4 1.4(DL+SDL) 6.57 3779.68 0.11 0.12 0.00 ‐3.81

5 1.2(DL+SDL)+1.6(LL) 11.94 4579.19 0.45 0.45 0.00 ‐7.64

1801 1 DL 2.97 1999.27 ‐0.01 0.00 0.00 ‐1.45

2 SDL 1.72 699.85 0.04 0.04 0.00 ‐1.28

3 LL 3.94 836.96 0.07 0.08 0.00 ‐

2.734 1.4(DL+SDL) 6.57 3778.76 0.04 0.05 0.00 ‐3.81

5 1.2(DL+SDL)+1.6(LL) 11.94 4578.08 0.15 0.16 0.00 ‐7.64

1802 1 DL 2.97 1999.31 0.00 0.00 0.00 ‐1.45

2 SDL 1.72 699.87 0.01 0.02 0.00 ‐1.28

3 LL 3.94 836.98 0.03 0.03 0.00 ‐2.73

4 1.4(DL+SDL) 6.57 3778.84 0.02 0.03 0.00 ‐3.81

5 1.2(DL+SDL)+1.6(LL) 11.94 4578.17 0.06 0.07 0.00 ‐7.64

1803 1 DL 2.97 1999.30 0.00 0.00 0.00 ‐1.45

2 SDL 1.72 699.87 0.01 0.01 0.00 ‐1.28

3 LL 3.94 836.97 0.01 0.01 0.00 ‐2.73

4 1.4(DL+SDL) 6.57 3778.83 0.01 0.01 0.00 ‐3.81

5 1.2(DL+SDL)+1.6(LL) 11.94 4578.16 0.02 0.03 0.00 ‐7.64

1804 1 DL 2.97 1999.31 0.00 0.00 0.00 ‐1.45

2 SDL 1.72 699.87 0.00 0.00 0.00 ‐1.28

3 LL 3.94 836.98 0.00 0.00 0.00 ‐2.73

4 1.4(DL+SDL) 6.57 3778.86 0.00 0.00 0.00 ‐3.81

5 1.2(DL+SDL)+1.6(LL) 11.94 4578.19 0.00 0.00 0.00 ‐7.64

1805 1 DL 2.97 1999.31 ‐0.01 ‐0.01 0.00 ‐1.45

2 SDL 1.72 699.87 0.00 0.00 0.00 ‐1.28

3 LL 3.94 836.98 0.00 ‐0.01 0.00 ‐2.73

4 1.4(DL+SDL) 6.57 3778.86 ‐

0.01 ‐

0.02 0.00 ‐

3.81

5 1.2(DL+SDL)+1.6(LL) 11.94 4578.19 ‐0.02 ‐0.02 0.00 ‐7.64

1806 1 DL 2.97 1999.30 ‐0.01 ‐0.02 0.00 ‐1.45

2 SDL 1.72 699.87 ‐0.01 ‐0.01 0.00 ‐1.28

3 LL 3.94 836.98 ‐0.01 ‐0.02 0.00 ‐2.73

4 1.4(DL+SDL) 6.57 3778.83 ‐0.03 ‐0.03 0.00 ‐3.81

5 1.2(DL+SDL)+1.6(LL) 11.94 4578.16 ‐0.04 ‐0.06 0.00 ‐7.64

1807 1 DL 2.97 1999.31 ‐0.03 ‐0.03 0.00 ‐1.45

2 SDL 1.72 699.87 ‐0.02 ‐0.02 0.00 ‐1.28

3 LL 3.94 836.98 ‐0.04 ‐0.04 0.00 ‐2.73

4 1.4(DL+SDL) 6.57 3778.85 ‐

0.06 ‐

0.08 0.00 ‐

3.815 1.2(DL+SDL)+1.6(LL) 11.94 4578.18 ‐0.12 ‐0.13 0.00 ‐7.64

1808 1 DL 2.97 1999.24 ‐0.06 ‐0.07 0.00 ‐1.45

2 SDL 1.72 699.84 ‐0.06 ‐0.06 0.00 ‐1.28

3 LL 3.94 836.95 ‐0.11 ‐0.11 0.00 ‐2.73

4 1.4(DL+SDL) 6.57 3778.71 ‐0.17 ‐0.18 0.00 ‐3.81

5 1.2(DL+SDL)+1.6(LL) 11.94 4578.01 ‐0.32 ‐0.34 0.00 ‐7.64

1809 1 DL 2.97 1999.78 ‐0.20 ‐0.19 0.00 ‐1.45

2 SDL 1.72 700.08 ‐0.16 ‐0.16 0.00 ‐1.28

3 LL 3.94 837.19 ‐0.35 ‐0.33 0.00 ‐2.73

4 1.4(DL+SDL) 6.57 3779.80 ‐0.50 ‐0.49 0.00 ‐3.81

5 1.2(DL+SDL)+1.6(LL) 11.94 4579.33 ‐0.98 ‐0.95 0.00 ‐7.64

1810 1 DL 2.96 1993.26 ‐0.32 ‐0.47 0.00 ‐1.43

2 SDL 1.72 697.33 ‐0.43 ‐0.44 0.00 ‐1.27


7/202



3 LL 3.94 834.19 ‐0.88 ‐0.95 0.00 ‐2.72

4 1.4(DL+SDL) 6.55 3766.82 ‐1.04 ‐1.28 0.00 ‐3.79

5 1.2(DL+SDL)+1.6(LL) 11.92 4563.41 ‐2.29 ‐2.62 0.01 ‐7.61

1811 1 DL 3.09 2060.98 ‐3.23 ‐1.85 0.00 ‐1.59

2 SDL 1.75 724.90 ‐

1.94 ‐

1.51 0.00 ‐

1.313 LL 4.01 865.58 ‐4.36 ‐3.24 0.00 ‐2.82

4 1.4(DL+SDL) 6.79 3900.24 ‐7.23 ‐4.70 0.00 ‐4.06

5 1.2(DL+SDL)+1.6(LL) 12.23 4727.99 ‐13.17 ‐9.22 0.00 ‐7.99

1812 1 DL 0.96 1580.30 ‐15.33 ‐10.37 0.02 ‐0.26

2 SDL 1.23 544.23 ‐0.76 ‐3.58 0.01 ‐0.96

3 LL 2.80 651.50 ‐1.55 ‐8.04 0.02 ‐2.08

4 1.4(DL+SDL) 3.07 2974.35 ‐22.52 ‐19.53 0.04 ‐1.70

5 1.2(DL+SDL)+1.6(LL) 7.11 3591.84 ‐21.78 ‐29.59 0.06 ‐4.79

3005 1 DL ‐1.30 1731.01 14.26 5.17 0.01 0.49

2 SDL ‐0.43 604.05 0.47 2.28 0.00 0.21

3 LL ‐1.16 723.99 0.96 5.16 0.01 0.51

4 1.4(DL+SDL) ‐2.42 3269.08 20.61 10.43 0.02 0.99

5 1.2(DL+SDL)+1.6(LL) ‐3.93 3960.45 19.21 17.19 0.02 1.66

3006 1 DL ‐1.82 2007.64 0.41 ‐0.30 0.00 0.60

2 SDL ‐0.54 703.52 1.23 0.96 0.00 0.25

3 LL ‐1.46 841.31 2.81 2.06 0.00 0.56

4 1.4(DL+SDL) ‐3.30 3795.61 2.30 0.92 0.00 1.19

5 1.2(DL+SDL)+1.6(LL) ‐5.17 4599.47 6.46 4.09 0.01 1.91

3007 1 DL ‐1.82 1958.73 ‐0.29 ‐0.15 0.00 0.58

2 SDL ‐0.54 683.55 0.27 0.29 0.00 0.24

3 LL ‐

1.46 818.67 0.55 0.61 0.00 0.54

4 1.4(DL+SDL) ‐3.30 3699.19 ‐0.02 0.19 0.00 1.15

5 1.2(DL+SDL)+1.6(LL) ‐5.16 4480.61 0.86 1.14 0.00 1.85

3008 1 DL ‐1.82 1964.31 ‐0.03 ‐0.02 0.00 0.58

2 SDL ‐0.54 685.92 0.10 0.11 0.00 0.24

3 LL ‐1.46 821.25 0.23 0.22 0.00 0.55

4 1.4(DL+SDL) ‐3.29 3710.32 0.11 0.12 0.00 1.15

5 1.2(DL+SDL)+1.6(LL) ‐5.16 4494.27 0.45 0.46 0.00 1.86

3009 1 DL ‐1.82 1963.74 ‐0.01 0.00 0.00 0.58

2 SDL ‐0.54 685.67 0.04 0.04 0.00 0.24

3 LL ‐

1.46 820.99 0.07 0.08 0.00 0.554 1.4(DL+SDL) ‐3.29 3709.18 0.04 0.06 0.00 1.15

5 1.2(DL+SDL)+1.6(LL) ‐5.16 4492.88 0.15 0.18 0.00 1.86

3010 1 DL ‐1.82 1963.80 0.00 0.01 0.00 0.58

2 SDL ‐0.54 685.70 0.01 0.02 0.00 0.24

3 LL ‐1.46 821.02 0.03 0.03 0.00 0.55

4 1.4(DL+SDL) ‐3.29 3709.29 0.02 0.03 0.00 1.15

5 1.2(DL+SDL)+1.6(LL) ‐5.16 4493.02 0.06 0.08 0.00 1.86

3011 1 DL ‐1.82 1963.79 0.00 0.00 0.00 0.58

2 SDL ‐0.54 685.69 0.01 0.01 0.00 0.24

3 LL ‐1.46 821.01 0.01 0.01 0.00 0.55

4 1.4(DL+SDL) ‐3.29 3709.28 0.01 0.01 0.00 1.15

5 1.2(DL+SDL)+1.6(LL) ‐5.16 4493.00 0.02 0.03 0.00 1.86

3012 1 DL ‐1.82 1963.81 0.00 0.00 0.00 0.58


8/202



2 SDL ‐0.54 685.70 0.00 0.00 0.00 0.24

3 LL ‐1.46 821.02 0.00 0.00 0.00 0.55

4 1.4(DL+SDL) ‐3.29 3709.30 0.00 0.00 0.00 1.15

5 1.2(DL+SDL)+1.6(LL) ‐5.16 4493.03 0.00 0.00 0.00 1.86

3013 1 DL ‐

1.82 1963.81 ‐

0.01 ‐

0.01 0.00 0.582 SDL ‐0.54 685.70 0.00 0.00 0.00 0.24

3 LL ‐1.46 821.02 ‐0.01 ‐0.01 0.00 0.55

4 1.4(DL+SDL) ‐3.29 3709.30 ‐0.01 ‐0.02 0.00 1.15

5 1.2(DL+SDL)+1.6(LL) ‐5.16 4493.04 ‐0.02 ‐0.03 0.00 1.86

3014 1 DL ‐1.82 1963.79 ‐0.01 ‐0.02 0.00 0.58

2 SDL ‐0.54 685.69 ‐0.01 ‐0.01 0.00 0.24

3 LL ‐1.46 821.01 ‐0.02 ‐0.02 0.00 0.55

4 1.4(DL+SDL) ‐3.29 3709.28 ‐0.03 ‐0.04 0.00 1.15

5 1.2(DL+SDL)+1.6(LL) ‐5.16 4493.00 ‐0.05 ‐0.07 0.00 1.86

3015 1 DL ‐1.82 1963.80 ‐0.03 ‐0.04 0.00 0.58

2 SDL ‐0.54 685.70 ‐0.02 ‐0.03 0.00 0.24

3 LL ‐1.46 821.02 ‐0.04 ‐0.05 0.00 0.55

4 1.4(DL+SDL) ‐3.29 3709.30 ‐0.07 ‐0.09 0.00 1.15

5 1.2(DL+SDL)+1.6(LL) ‐5.16 4493.03 ‐0.12 ‐0.15 0.00 1.86

3016 1 DL ‐1.82 1963.71 ‐0.07 ‐0.08 0.00 0.58

2 SDL ‐0.54 685.65 ‐0.06 ‐0.06 0.00 0.24

3 LL ‐1.46 820.98 ‐0.11 ‐0.12 0.00 0.55

4 1.4(DL+SDL) ‐3.29 3709.11 ‐0.17 ‐0.20 0.00 1.15

5 1.2(DL+SDL)+1.6(LL) ‐5.16 4492.80 ‐0.33 ‐0.36 0.00 1.86

3017 1 DL ‐1.82 1964.42 ‐0.20 ‐0.20 0.00 0.58

2 SDL ‐

0.54 685.97 ‐

0.16 ‐

0.16 0.00 0.24

3 LL ‐1.46 821.29 ‐0.35 ‐0.34 0.00 0.55

4 1.4(DL+SDL) ‐3.29 3710.54 ‐0.50 ‐0.50 0.00 1.15

5 1.2(DL+SDL)+1.6(LL) ‐5.16 4494.53 ‐0.98 ‐0.97 0.00 1.86

3018 1 DL ‐1.82 1957.16 ‐0.30 ‐0.47 0.00 0.58

2 SDL ‐0.54 682.90 ‐0.43 ‐0.45 0.00 0.24

3 LL ‐1.46 817.96 ‐0.87 ‐0.95 0.00 0.54

4 1.4(DL+SDL) ‐3.30 3696.09 ‐1.01 ‐1.28 0.00 1.15

5 1.2(DL+SDL)+1.6(LL) ‐5.17 4476.82 ‐2.25 ‐2.61 0.00 1.85

3019 1 DL ‐1.81 2024.96 ‐3.17 ‐1.80 0.00 0.61

2 SDL ‐

0.54 710.51 ‐

1.92 ‐

1.50 0.00 0.253 LL ‐1.46 849.37 ‐4.34 ‐3.22 0.00 0.57

4 1.4(DL+SDL) ‐3.29 3829.65 ‐7.13 ‐4.62 ‐0.01 1.21

5 1.2(DL+SDL)+1.6(LL) ‐5.16 4641.55 ‐13.05 ‐9.10 ‐0.01 1.94

3020 1 DL ‐1.02 1561.39 ‐15.29 ‐10.26 ‐0.01 0.40

2 SDL ‐0.37 536.71 ‐0.75 ‐3.55 ‐0.01 0.19

3 LL ‐1.00 643.01 ‐1.53 ‐7.98 ‐0.01 0.46

4 1.4(DL+SDL) ‐1.94 2937.33 ‐22.45 ‐19.33 ‐0.02 0.83

5 1.2(DL+SDL)+1.6(LL) ‐3.26 3546.52 ‐21.69 ‐29.33 ‐0.03 1.44

4213 1 DL ‐7.81 1441.95 14.43 3.33 0.30 4.76

2 SDL 1.12 494.21 0.38 1.92 ‐0.01 0.85

3 LL 2.39 589.55 0.78 4.34 0.01 2.21

4 1.4(DL+SDL) ‐9.37 2710.62 20.73 7.35 0.41 7.84

5 1.2(DL+SDL)+1.6(LL) ‐4.21 3266.66 19.02 13.25 0.37 10.26


9/202



4214 1 DL ‐6.95 1660.21 ‐0.79 ‐1.20 0.14 5.47

2 SDL 1.30 569.90 1.05 0.83 ‐0.01 1.02

3 LL 2.82 678.54 2.39 1.76 ‐0.02 2.63

4 1.4(DL+SDL) ‐7.90 3122.16 0.36 ‐0.52 0.18 9.08

5 1.2(DL+SDL)+1.6(LL) ‐

2.26 3761.80 4.14 2.36 0.12 11.994215 1 DL ‐7.02 1623.39 ‐0.56 ‐0.45 0.09 5.40

2 SDL 1.28 554.86 0.24 0.26 ‐0.01 1.01

3 LL 2.79 661.63 0.47 0.54 ‐0.02 2.59

4 1.4(DL+SDL) ‐8.03 3049.55 ‐0.45 ‐0.26 0.12 8.97

5 1.2(DL+SDL)+1.6(LL) ‐2.42 3672.51 0.36 0.63 0.07 11.82

4216 1 DL ‐7.01 1628.33 ‐0.15 ‐0.14 0.06 5.40

2 SDL 1.28 556.97 0.09 0.11 ‐0.01 1.01

3 LL 2.79 663.90 0.20 0.20 ‐0.01 2.59

4 1.4(DL+SDL) ‐8.02 3059.42 ‐0.08 ‐0.06 0.07 8.97

5 1.2(DL+SDL)+1.6(LL) ‐2.40 3684.61 0.26 0.28 0.04 11.83

4217 1 DL ‐7.01 1627.68 ‐0.06 ‐0.05 0.03 5.40

2 SDL 1.28 556.69 0.04 0.05 0.00 1.01

3 LL 2.79 663.61 0.07 0.08 ‐0.01 2.59

4 1.4(DL+SDL) ‐8.02 3058.11 ‐0.03 ‐0.01 0.04 8.98

5 1.2(DL+SDL)+1.6(LL) ‐2.40 3683.02 0.08 0.11 0.02 11.83

4218 1 DL ‐7.01 1627.76 ‐0.02 ‐0.02 0.02 5.41

2 SDL 1.28 556.73 0.02 0.02 0.00 1.01

3 LL 2.79 663.65 0.03 0.03 0.00 2.59

4 1.4(DL+SDL) ‐8.02 3058.28 ‐0.01 0.00 0.02 8.98

5 1.2(DL+SDL)+1.6(LL) ‐2.40 3683.22 0.03 0.05 0.01 11.83

4219 1 DL ‐

7.01 1627.75 ‐

0.01 ‐

0.01 0.01 5.41

2 SDL 1.28 556.72 0.01 0.01 0.00 1.01

3 LL 2.79 663.64 0.01 0.01 0.00 2.59

4 1.4(DL+SDL) ‐8.02 3058.26 ‐0.01 0.00 0.01 8.98

5 1.2(DL+SDL)+1.6(LL) ‐2.40 3683.19 0.01 0.02 0.01 11.83

4220 1 DL ‐7.01 1627.76 ‐0.01 ‐0.01 0.00 5.41

2 SDL 1.28 556.72 0.00 0.00 0.00 1.01

3 LL 2.79 663.65 0.00 0.00 0.00 2.59

4 1.4(DL+SDL) ‐8.02 3058.28 ‐0.01 ‐0.01 0.01 8.98

5 1.2(DL+SDL)+1.6(LL) ‐2.40 3683.22 0.00 0.00 0.00 11.84

4221 1 DL ‐

7.01 1627.76 ‐

0.01 ‐

0.01 0.00 5.412 SDL 1.28 556.72 0.00 ‐0.01 0.00 1.01

3 LL 2.79 663.65 ‐0.01 ‐0.01 0.00 2.59

4 1.4(DL+SDL) ‐8.02 3058.28 ‐0.01 ‐0.02 0.00 8.98

5 1.2(DL+SDL)+1.6(LL) ‐2.40 3683.22 ‐0.02 ‐0.03 0.00 11.84

4222 1 DL ‐7.01 1627.75 0.00 ‐0.01 ‐0.01 5.41

2 SDL 1.28 556.72 ‐0.01 ‐0.02 0.00 1.01

3 LL 2.79 663.64 ‐0.02 ‐0.02 0.00 2.59

4 1.4(DL+SDL) ‐8.02 3058.25 ‐0.02 ‐0.04 ‐0.01 8.98

5 1.2(DL+SDL)+1.6(LL) ‐2.40 3683.19 ‐0.05 ‐0.07 0.00 11.84

4223 1 DL ‐7.01 1627.77 ‐0.01 ‐0.02 ‐0.01 5.41

2 SDL 1.28 556.73 ‐0.02 ‐0.03 0.00 1.01

3 LL 2.79 663.65 ‐0.04 ‐0.05 0.01 2.59

4 1.4(DL+SDL) ‐8.02 3058.29 ‐0.04 ‐0.07 ‐0.01 8.98


10/202



5 1.2(DL+SDL)+1.6(LL) ‐2.40 3683.24 ‐0.10 ‐0.14 0.00 11.84

4224 1 DL ‐7.01 1627.64 ‐0.01 ‐0.03 ‐0.02 5.41

2 SDL 1.28 556.67 ‐0.06 ‐0.07 0.01 1.01

3 LL 2.79 663.60 ‐0.11 ‐0.12 0.01 2.59

4 1.4(DL+SDL) ‐

8.02 3058.03 ‐

0.10 ‐

0.13 ‐

0.02 8.985 1.2(DL+SDL)+1.6(LL) ‐2.40 3682.92 ‐0.26 ‐0.30 0.00 11.84

4225 1 DL ‐7.01 1628.49 ‐0.07 ‐0.06 ‐0.04 5.40

2 SDL 1.28 557.05 ‐0.15 ‐0.16 0.01 1.01

3 LL 2.79 663.98 ‐0.32 ‐0.31 0.02 2.59

4 1.4(DL+SDL) ‐8.01 3059.76 ‐0.30 ‐0.31 ‐0.04 8.97

5 1.2(DL+SDL)+1.6(LL) ‐2.40 3685.01 ‐0.77 ‐0.76 ‐0.01 11.83

4226 1 DL ‐7.02 1621.77 0.04 ‐0.12 ‐0.07 5.40

2 SDL 1.28 554.18 ‐0.37 ‐0.40 0.02 1.01

3 LL 2.79 660.90 ‐0.74 ‐0.84 0.03 2.59

4 1.4(DL+SDL) ‐8.04 3046.33 ‐0.46 ‐0.73 ‐0.08 8.97

5 1.2(DL+SDL)+1.6(LL) ‐2.43 3668.59 ‐1.58 ‐1.97 ‐0.03 11.82

4227 1 DL ‐6.93 1674.06 ‐1.71 ‐0.67 ‐0.12 5.49

2 SDL 1.31 575.51 ‐1.67 ‐1.31 0.02 1.02

3 LL 2.83 684.95 ‐3.77 ‐2.78 0.04 2.64

4 1.4(DL+SDL) ‐7.86 3149.39 ‐4.74 ‐2.77 ‐0.13 9.12

5 1.2(DL+SDL)+1.6(LL) ‐2.21 3795.40 ‐10.10 ‐6.82 ‐0.05 12.05

4228 1 DL ‐8.32 1308.31 ‐15.30 ‐7.87 ‐0.30 4.27

2 SDL 0.99 441.13 ‐0.61 ‐3.05 0.01 0.73

3 LL 2.10 525.89 ‐1.25 ‐6.84 ‐0.02 1.93

4 1.4(DL+SDL) ‐10.27 2449.22 ‐22.27 ‐15.29 ‐0.40 6.99

5 1.2(DL+SDL)+1.6(LL) ‐

5.43 2940.75 ‐

21.08 ‐

24.05 ‐

0.37 9.08

4833 1 DL 0.47 736.75 14.48 4.59 0.10 ‐0.13

2 SDL ‐0.01 252.17 ‐0.27 0.16 0.00 0.05

3 LL ‐0.35 305.48 ‐0.52 0.26 0.00 0.27

4 1.4(DL+SDL) 0.65 1384.49 19.90 6.65 0.13 ‐0.11

5 1.2(DL+SDL)+1.6(LL) ‐0.01 1675.47 16.23 6.11 0.12 0.33

4834 1 DL 0.37 849.92 ‐3.80 ‐2.66 0.04 ‐0.05

2 SDL ‐0.05 284.87 0.59 0.40 0.00 0.07

3 LL ‐0.47 344.12 1.05 0.71 ‐0.01 0.34

4 1.4(DL+SDL) 0.45 1588.70 ‐4.49 ‐3.16 0.05 0.04

5 1.2(DL+SDL)+1.6(LL) ‐

0.37 1912.34 ‐

2.17 ‐

1.58 0.03 0.574835 1 DL 0.36 828.55 ‐1.42 ‐1.20 0.03 ‐0.04

2 SDL ‐0.05 276.75 0.17 0.16 0.00 0.08

3 LL ‐0.47 334.92 0.30 0.28 ‐0.01 0.34

4 1.4(DL+SDL) 0.43 1547.42 ‐1.75 ‐1.46 0.03 0.04

5 1.2(DL+SDL)+1.6(LL) ‐0.39 1862.23 ‐1.03 ‐0.80 0.02 0.57

4836 1 DL 0.36 831.75 ‐0.86 ‐0.71 0.02 ‐0.05

2 SDL ‐0.05 278.05 0.13 0.11 0.00 0.08

3 LL ‐0.47 336.35 0.23 0.19 0.00 0.34

4 1.4(DL+SDL) 0.43 1553.73 ‐1.01 ‐0.85 0.02 0.04

5 1.2(DL+SDL)+1.6(LL) ‐0.38 1869.93 ‐0.49 ‐0.42 0.01 0.57

4837 1 DL 0.36 831.30 ‐0.50 ‐0.42 0.01 ‐0.05

2 SDL ‐0.05 277.86 0.07 0.06 0.00 0.08

3 LL ‐0.47 336.15 0.13 0.11 0.00 0.34


11/202



4 1.4(DL+SDL) 0.43 1552.83 ‐0.60 ‐0.50 0.01 0.04

5 1.2(DL+SDL)+1.6(LL) ‐0.38 1868.84 ‐0.31 ‐0.26 0.01 0.57

4838 1 DL 0.36 831.36 ‐0.28 ‐0.24 0.01 ‐0.05

2 SDL ‐0.05 277.89 0.04 0.03 0.00 0.08

3 LL ‐

0.47 336.18 0.07 0.06 0.00 0.344 1.4(DL+SDL) 0.43 1552.95 ‐0.34 ‐0.28 0.01 0.04

5 1.2(DL+SDL)+1.6(LL) ‐0.38 1868.99 ‐0.18 ‐0.15 0.00 0.57

4839 1 DL 0.36 831.35 ‐0.15 ‐0.13 0.00 ‐0.05

2 SDL ‐0.05 277.89 0.02 0.02 0.00 0.08

3 LL ‐0.47 336.18 0.03 0.03 0.00 0.34

4 1.4(DL+SDL) 0.43 1552.92 ‐0.18 ‐0.15 0.00 0.04

5 1.2(DL+SDL)+1.6(LL) ‐0.38 1868.96 ‐0.11 ‐0.09 0.00 0.57

4840 1 DL 0.36 831.35 ‐0.06 ‐0.05 0.00 ‐0.05

2 SDL ‐0.05 277.89 0.00 0.00 0.00 0.08

3 LL ‐0.47 336.18 0.00 0.00 0.00 0.34

4 1.4(DL+SDL) 0.43 1552.94 ‐0.08 ‐0.07 0.00 0.04

5 1.2(DL+SDL)+1.6(LL) ‐0.38 1868.98 ‐0.07 ‐0.06 0.00 0.57

4841 1 DL 0.36 831.35 0.01 0.01 0.00 ‐0.05

2 SDL ‐0.05 277.89 ‐0.02 ‐0.01 0.00 0.08

3 LL ‐0.47 336.18 ‐0.03 ‐0.02 0.00 0.34

4 1.4(DL+SDL) 0.43 1552.94 ‐0.01 ‐0.01 0.00 0.04

5 1.2(DL+SDL)+1.6(LL) ‐0.38 1868.98 ‐0.05 ‐0.04 0.00 0.57

4842 1 DL 0.36 831.34 0.09 0.07 0.00 ‐0.05

2 SDL ‐0.05 277.89 ‐0.04 ‐0.03 0.00 0.08

3 LL ‐0.47 336.18 ‐0.06 ‐0.05 0.00 0.34

4 1.4(DL+SDL) 0.43 1552.92 0.07 0.06 0.00 0.04

5 1.2(DL+SDL)+1.6(LL) ‐0.38 1868.96 ‐0.04 ‐0.04 0.00 0.57

4843 1 DL 0.36 831.36 0.19 0.16 0.00 ‐0.05

2 SDL ‐0.05 277.89 ‐0.07 ‐0.06 0.00 0.08

3 LL ‐0.47 336.18 ‐0.12 ‐0.10 0.00 0.34

4 1.4(DL+SDL) 0.43 1552.95 0.17 0.14 0.00 0.04

5 1.2(DL+SDL)+1.6(LL) ‐0.38 1868.99 ‐0.04 ‐0.04 0.00 0.57

4844 1 DL 0.36 831.27 0.35 0.29 ‐0.01 ‐0.05

2 SDL ‐0.05 277.85 ‐0.12 ‐0.10 0.00 0.08

3 LL ‐0.47 336.14 ‐0.20 ‐0.17 0.00 0.34

4 1.4(DL+SDL) 0.43 1552.77 0.33 0.27 ‐

0.01 0.045 1.2(DL+SDL)+1.6(LL) ‐0.38 1868.77 ‐0.05 ‐0.05 0.00 0.57

4845 1 DL 0.36 831.88 0.59 0.50 ‐0.01 ‐0.05

2 SDL ‐0.05 278.11 ‐0.21 ‐0.17 0.00 0.08

3 LL ‐0.47 336.41 ‐0.38 ‐0.31 0.01 0.34

4 1.4(DL+SDL) 0.43 1553.98 0.53 0.45 ‐0.01 0.04

5 1.2(DL+SDL)+1.6(LL) ‐0.38 1870.23 ‐0.15 ‐0.10 0.00 0.57

4846 1 DL 0.36 827.43 1.08 0.88 ‐0.02 ‐0.04

2 SDL ‐0.05 276.29 ‐0.27 ‐0.26 0.01 0.08

3 LL ‐0.47 334.40 ‐0.47 ‐0.45 0.01 0.34

4 1.4(DL+SDL) 0.42 1545.20 1.14 0.88 ‐0.02 0.05

5 1.2(DL+SDL)+1.6(LL) ‐0.39 1859.51 0.22 0.03 ‐0.01 0.58

4847 1 DL 0.38 858.27 2.59 1.85 ‐0.03 ‐0.05

2 SDL ‐0.04 288.21 ‐0.94 ‐0.64 0.01 0.07


12/202



3 LL ‐0.47 348.00 ‐1.68 ‐1.13 0.01 0.34

4 1.4(DL+SDL) 0.46 1605.06 2.31 1.70 ‐0.03 0.03

5 1.2(DL+SDL)+1.6(LL) ‐0.35 1932.57 ‐0.71 ‐0.35 ‐0.01 0.57

4848 1 DL 0.57 673.49 ‐13.95 ‐4.91 ‐0.10 ‐0.20

2 SDL 0.01 227.32 0.41 ‐

0.25 0.00 0.033 LL ‐0.29 275.38 0.80 ‐0.42 0.00 0.22

4 1.4(DL+SDL) 0.82 1261.14 ‐18.95 ‐7.22 ‐0.13 ‐0.23

5 1.2(DL+SDL)+1.6(LL) 0.24 1521.59 ‐14.96 ‐6.86 ‐0.12 0.16

5453 1 DL ‐0.47 736.75 14.48 4.59 ‐0.10 0.13

2 SDL 0.01 252.17 ‐0.27 0.16 0.00 ‐0.05

3 LL 0.35 305.48 ‐0.52 0.26 0.00 ‐0.27

4 1.4(DL+SDL) ‐0.65 1384.49 19.90 6.65 ‐0.13 0.11

5 1.2(DL+SDL)+1.6(LL) 0.01 1675.48 16.23 6.11 ‐0.12 ‐0.33

5454 1 DL ‐0.37 849.92 ‐3.80 ‐2.66 ‐0.04 0.05

2 SDL 0.05 284.87 0.59 0.40 0.00 ‐0.07

3 LL 0.47 344.12 1.05 0.71 0.01 ‐0.34

4 1.4(DL+SDL) ‐0.45 1588.71 ‐4.49 ‐3.16 ‐0.05 ‐0.04

5 1.2(DL+SDL)+1.6(LL) 0.37 1912.34 ‐2.17 ‐1.58 ‐0.03 ‐0.57

5455 1 DL ‐0.36 828.55 ‐1.42 ‐1.20 ‐0.03 0.04

2 SDL 0.05 276.75 0.17 0.16 0.00 ‐0.08

3 LL 0.47 334.92 0.30 0.28 0.01 ‐0.34

4 1.4(DL+SDL) ‐0.43 1547.42 ‐1.75 ‐1.46 ‐0.03 ‐0.04

5 1.2(DL+SDL)+1.6(LL) 0.39 1862.23 ‐1.03 ‐0.80 ‐0.02 ‐0.57

5456 1 DL ‐0.36 831.75 ‐0.86 ‐0.71 ‐0.02 0.05

2 SDL 0.05 278.05 0.13 0.11 0.00 ‐0.08

3 LL 0.47 336.35 0.23 0.19 0.00 ‐

0.34

4 1.4(DL+SDL) ‐0.43 1553.73 ‐1.01 ‐0.85 ‐0.02 ‐0.04

5 1.2(DL+SDL)+1.6(LL) 0.38 1869.93 ‐0.49 ‐0.42 ‐0.01 ‐0.57

5457 1 DL ‐0.36 831.30 ‐0.50 ‐0.42 ‐0.01 0.05

2 SDL 0.05 277.86 0.07 0.06 0.00 ‐0.08

3 LL 0.47 336.16 0.13 0.11 0.00 ‐0.34

4 1.4(DL+SDL) ‐0.43 1552.83 ‐0.60 ‐0.50 ‐0.01 ‐0.04

5 1.2(DL+SDL)+1.6(LL) 0.38 1868.85 ‐0.31 ‐0.26 ‐0.01 ‐0.57

5458 1 DL ‐0.36 831.36 ‐0.28 ‐0.24 ‐0.01 0.05

2 SDL 0.05 277.89 0.04 0.03 0.00 ‐0.08

3 LL 0.47 336.18 0.07 0.06 0.00 ‐

0.344 1.4(DL+SDL) ‐0.43 1552.95 ‐0.34 ‐0.28 ‐0.01 ‐0.04

5 1.2(DL+SDL)+1.6(LL) 0.38 1868.99 ‐0.18 ‐0.15 0.00 ‐0.57

5459 1 DL ‐0.36 831.35 ‐0.15 ‐0.13 0.00 0.05

2 SDL 0.05 277.89 0.02 0.02 0.00 ‐0.08

3 LL 0.47 336.18 0.03 0.03 0.00 ‐0.34

4 1.4(DL+SDL) ‐0.43 1552.93 ‐0.18 ‐0.15 0.00 ‐0.04

5 1.2(DL+SDL)+1.6(LL) 0.38 1868.97 ‐0.11 ‐0.09 0.00 ‐0.57

5460 1 DL ‐0.36 831.35 ‐0.06 ‐0.05 0.00 0.05

2 SDL 0.05 277.89 0.00 0.00 0.00 ‐0.08

3 LL 0.47 336.18 0.00 0.00 0.00 ‐0.34

4 1.4(DL+SDL) ‐0.43 1552.94 ‐0.08 ‐0.07 0.00 ‐0.04

5 1.2(DL+SDL)+1.6(LL) 0.38 1868.98 ‐0.07 ‐0.06 0.00 ‐0.57

5461 1 DL ‐0.36 831.35 0.01 0.01 0.00 0.05


13/202



2 SDL 0.05 277.89 ‐0.02 ‐0.01 0.00 ‐0.08

3 LL 0.47 336.18 ‐0.03 ‐0.02 0.00 ‐0.34

4 1.4(DL+SDL) ‐0.43 1552.94 ‐0.01 ‐0.01 0.00 ‐0.04

5 1.2(DL+SDL)+1.6(LL) 0.38 1868.98 ‐0.05 ‐0.04 0.00 ‐0.57

5462 1 DL ‐

0.36 831.35 0.09 0.07 0.00 0.052 SDL 0.05 277.89 ‐0.04 ‐0.03 0.00 ‐0.08

3 LL 0.47 336.18 ‐0.06 ‐0.05 0.00 ‐0.34

4 1.4(DL+SDL) ‐0.43 1552.92 0.07 0.06 0.00 ‐0.04

5 1.2(DL+SDL)+1.6(LL) 0.38 1868.96 ‐0.04 ‐0.04 0.00 ‐0.57

5463 1 DL ‐0.36 831.36 0.19 0.16 0.00 0.05

2 SDL 0.05 277.89 ‐0.07 ‐0.06 0.00 ‐0.08

3 LL 0.47 336.18 ‐0.12 ‐0.10 0.00 ‐0.34

4 1.4(DL+SDL) ‐0.43 1552.95 0.17 0.14 0.00 ‐0.04

5 1.2(DL+SDL)+1.6(LL) 0.38 1868.99 ‐0.04 ‐0.04 0.00 ‐0.57

5464 1 DL ‐0.36 831.27 0.35 0.29 0.01 0.05

2 SDL 0.05 277.85 ‐0.12 ‐0.10 0.00 ‐0.08

3 LL 0.47 336.14 ‐0.20 ‐0.17 0.00 ‐0.34

4 1.4(DL+SDL) ‐0.43 1552.77 0.33 0.27 0.01 ‐0.04

5 1.2(DL+SDL)+1.6(LL) 0.38 1868.78 ‐0.05 ‐0.05 0.00 ‐0.57

5465 1 DL ‐0.36 831.88 0.59 0.50 0.01 0.05

2 SDL 0.05 278.11 ‐0.21 ‐0.17 0.00 ‐0.08

3 LL 0.47 336.41 ‐0.38 ‐0.31 ‐0.01 ‐0.34

4 1.4(DL+SDL) ‐0.43 1553.98 0.53 0.45 0.01 ‐0.04

5 1.2(DL+SDL)+1.6(LL) 0.38 1870.24 ‐0.15 ‐0.10 0.00 ‐0.57

5466 1 DL ‐0.36 827.43 1.08 0.88 0.02 0.04

2 SDL 0.05 276.29 ‐

0.27 ‐

0.26 ‐

0.01 ‐

0.08

3 LL 0.47 334.41 ‐0.47 ‐0.45 ‐0.01 ‐0.34

4 1.4(DL+SDL) ‐0.42 1545.20 1.14 0.88 0.02 ‐0.05

5 1.2(DL+SDL)+1.6(LL) 0.39 1859.51 0.22 0.03 0.01 ‐0.58

5467 1 DL ‐0.38 858.27 2.59 1.85 0.03 0.05

2 SDL 0.04 288.21 ‐0.94 ‐0.64 ‐0.01 ‐0.07

3 LL 0.47 348.00 ‐1.68 ‐1.13 ‐0.01 ‐0.34

4 1.4(DL+SDL) ‐0.46 1605.06 2.31 1.70 0.03 ‐0.03

5 1.2(DL+SDL)+1.6(LL) 0.35 1932.57 ‐0.71 ‐0.35 0.01 ‐0.57

5468 1 DL ‐0.57 673.49 ‐13.95 ‐4.91 0.10 0.20

2 SDL ‐

0.01 227.32 0.41 ‐

0.25 0.00 ‐

0.033 LL 0.29 275.38 0.80 ‐0.42 0.00 ‐0.22

4 1.4(DL+SDL) ‐0.82 1261.14 ‐18.95 ‐7.22 0.13 0.23

5 1.2(DL+SDL)+1.6(LL) ‐0.24 1521.59 ‐14.96 ‐6.86 0.12 ‐0.16

6073 1 DL 7.81 1441.94 14.43 3.33 ‐0.30 ‐4.76

2 SDL ‐1.12 494.20 0.38 1.92 0.01 ‐0.85

3 LL ‐2.39 589.54 0.78 4.34 ‐0.01 ‐2.21

4 1.4(DL+SDL) 9.37 2710.60 20.73 7.35 ‐0.41 ‐7.84

5 1.2(DL+SDL)+1.6(LL) 4.21 3266.64 19.02 13.25 ‐0.37 ‐10.26

6074 1 DL 6.95 1660.20 ‐0.79 ‐1.20 ‐0.14 ‐5.47

2 SDL ‐1.30 569.90 1.05 0.83 0.01 ‐1.02

3 LL ‐2.82 678.54 2.39 1.76 0.02 ‐2.63

4 1.4(DL+SDL) 7.90 3122.13 0.36 ‐0.52 ‐0.18 ‐9.08

5 1.2(DL+SDL)+1.6(LL) 2.26 3761.77 4.14 2.36 ‐0.12 ‐11.99


14/202



6075 1 DL 7.02 1623.38 ‐0.56 ‐0.45 ‐0.09 ‐5.40

2 SDL ‐1.28 554.85 0.24 0.26 0.01 ‐1.01

3 LL ‐2.79 661.63 0.47 0.54 0.02 ‐2.59

4 1.4(DL+SDL) 8.03 3049.52 ‐0.45 ‐0.26 ‐0.12 ‐8.97

5 1.2(DL+SDL)+1.6(LL) 2.42 3672.48 0.36 0.63 ‐

0.07 ‐

11.826076 1 DL 7.01 1628.32 ‐0.15 ‐0.14 ‐0.06 ‐5.40

2 SDL ‐1.28 556.97 0.09 0.11 0.01 ‐1.01

3 LL ‐2.79 663.90 0.20 0.20 0.01 ‐2.59

4 1.4(DL+SDL) 8.01 3059.40 ‐0.08 ‐0.06 ‐0.07 ‐8.97

5 1.2(DL+SDL)+1.6(LL) 2.40 3684.58 0.26 0.28 ‐0.04 ‐11.83

6077 1 DL 7.01 1627.67 ‐0.06 ‐0.05 ‐0.03 ‐5.40

2 SDL ‐1.28 556.68 0.04 0.05 0.00 ‐1.01

3 LL ‐2.79 663.61 0.07 0.08 0.01 ‐2.59

4 1.4(DL+SDL) 8.02 3058.09 ‐0.03 ‐0.01 ‐0.04 ‐8.98

5 1.2(DL+SDL)+1.6(LL) 2.40 3682.99 0.08 0.11 ‐0.02 ‐11.83

6078 1 DL 7.01 1627.75 ‐0.02 ‐0.02 ‐0.02 ‐5.40

2 SDL ‐1.28 556.72 0.02 0.02 0.00 ‐1.01

3 LL ‐2.79 663.64 0.03 0.03 0.00 ‐2.59

4 1.4(DL+SDL) 8.02 3058.26 ‐0.01 0.00 ‐0.02 ‐8.98

5 1.2(DL+SDL)+1.6(LL) 2.40 3683.20 0.03 0.05 ‐0.01 ‐11.83

6079 1 DL 7.01 1627.74 ‐0.01 ‐0.01 ‐0.01 ‐5.40

2 SDL ‐1.28 556.71 0.01 0.01 0.00 ‐1.01

3 LL ‐2.79 663.64 0.01 0.01 0.00 ‐2.59

4 1.4(DL+SDL) 8.02 3058.23 ‐0.01 0.00 ‐0.01 ‐8.98

5 1.2(DL+SDL)+1.6(LL) 2.40 3683.16 0.01 0.02 ‐0.01 ‐11.83

6080 1 DL 7.01 1627.75 ‐

0.01 ‐

0.01 0.00 ‐

5.41

2 SDL ‐1.28 556.72 0.00 0.00 0.00 ‐1.01

3 LL ‐2.79 663.64 0.00 0.00 0.00 ‐2.59

4 1.4(DL+SDL) 8.02 3058.26 ‐0.01 ‐0.01 ‐0.01 ‐8.98

5 1.2(DL+SDL)+1.6(LL) 2.40 3683.19 0.00 0.00 0.00 ‐11.83

6081 1 DL 7.01 1627.75 ‐0.01 ‐0.01 0.00 ‐5.41

2 SDL ‐1.28 556.72 0.00 ‐0.01 0.00 ‐1.01

3 LL ‐2.79 663.64 ‐0.01 ‐0.01 0.00 ‐2.59

4 1.4(DL+SDL) 8.02 3058.26 ‐0.01 ‐0.02 0.00 ‐8.98

5 1.2(DL+SDL)+1.6(LL) 2.40 3683.19 ‐0.02 ‐0.03 0.00 ‐11.83

6082 1 DL 7.01 1627.74 0.00 ‐

0.01 0.01 ‐

5.412 SDL ‐1.28 556.71 ‐0.01 ‐0.02 0.00 ‐1.01

3 LL ‐2.79 663.64 ‐0.02 ‐0.02 0.00 ‐2.59

4 1.4(DL+SDL) 8.02 3058.23 ‐0.02 ‐0.04 0.01 ‐8.98

5 1.2(DL+SDL)+1.6(LL) 2.40 3683.16 ‐0.05 ‐0.07 0.00 ‐11.83

6083 1 DL 7.01 1627.76 ‐0.01 ‐0.02 0.01 ‐5.41

2 SDL ‐1.28 556.72 ‐0.02 ‐0.03 0.00 ‐1.01

3 LL ‐2.79 663.65 ‐0.04 ‐0.05 ‐0.01 ‐2.59

4 1.4(DL+SDL) 8.02 3058.27 ‐0.04 ‐0.07 0.01 ‐8.98

5 1.2(DL+SDL)+1.6(LL) 2.40 3683.21 ‐0.10 ‐0.14 0.00 ‐11.83

6084 1 DL 7.01 1627.63 ‐0.01 ‐0.03 0.02 ‐5.40

2 SDL ‐1.28 556.66 ‐0.06 ‐0.07 ‐0.01 ‐1.01

3 LL ‐2.79 663.59 ‐0.11 ‐0.12 ‐0.01 ‐2.59

4 1.4(DL+SDL) 8.02 3058.01 ‐0.10 ‐0.13 0.02 ‐8.98


15/202



5 1.2(DL+SDL)+1.6(LL) 2.40 3682.89 ‐0.26 ‐0.30 0.00 ‐11.83

6085 1 DL 7.01 1628.48 ‐0.07 ‐0.06 0.04 ‐5.40

2 SDL ‐1.28 557.04 ‐0.15 ‐0.16 ‐0.01 ‐1.01

3 LL ‐2.79 663.97 ‐0.32 ‐0.31 ‐0.02 ‐2.59

4 1.4(DL+SDL) 8.01 3059.74 ‐

0.30 ‐

0.31 0.04 ‐

8.975 1.2(DL+SDL)+1.6(LL) 2.40 3684.98 ‐0.77 ‐0.76 0.01 ‐11.83

6086 1 DL 7.02 1621.76 0.04 ‐0.12 0.07 ‐5.40

2 SDL ‐1.28 554.18 ‐0.37 ‐0.40 ‐0.02 ‐1.01

3 LL ‐2.79 660.90 ‐0.74 ‐0.84 ‐0.03 ‐2.58

4 1.4(DL+SDL) 8.04 3046.31 ‐0.46 ‐0.73 0.08 ‐8.97

5 1.2(DL+SDL)+1.6(LL) 2.43 3668.56 ‐1.58 ‐1.97 0.03 ‐11.82

6087 1 DL 6.93 1674.04 ‐1.71 ‐0.67 0.12 ‐5.49

2 SDL ‐1.31 575.51 ‐1.67 ‐1.31 ‐0.02 ‐1.02

3 LL ‐2.83 684.94 ‐3.77 ‐2.78 ‐0.04 ‐2.64

4 1.4(DL+SDL) 7.86 3149.37 ‐4.74 ‐2.77 0.13 ‐9.12

5 1.2(DL+SDL)+1.6(LL) 2.21 3795.37 ‐10.10 ‐6.82 0.05 ‐12.05

6088 1 DL 8.32 1308.31 ‐15.30 ‐7.87 0.30 ‐4.27

2 SDL ‐0.99 441.12 ‐0.61 ‐3.05 ‐0.01 ‐0.73

3 LL ‐2.10 525.89 ‐1.25 ‐6.84 0.02 ‐1.93

4 1.4(DL+SDL) 10.27 2449.20 ‐22.27 ‐15.29 0.40 ‐6.99

5 1.2(DL+SDL)+1.6(LL) 5.43 2940.73 ‐21.08 ‐24.05 0.37 ‐9.08

7281 1 DL 1.30 1731.00 14.26 5.17 ‐0.01 ‐0.49

2 SDL 0.43 604.05 0.47 2.28 0.00 ‐0.21

3 LL 1.16 723.99 0.96 5.16 ‐0.01 ‐0.51

4 1.4(DL+SDL) 2.42 3269.06 20.61 10.43 ‐0.02 ‐0.99

5 1.2(DL+SDL)+1.6(LL) 3.93 3960.43 19.21 17.19 ‐

0.02 ‐

1.66

7282 1 DL 1.82 2007.62 0.41 ‐0.30 0.00 ‐0.60

2 SDL 0.54 703.51 1.23 0.96 0.00 ‐0.25

3 LL 1.46 841.30 2.81 2.06 0.00 ‐0.56

4 1.4(DL+SDL) 3.30 3795.59 2.30 0.92 0.00 ‐1.19

5 1.2(DL+SDL)+1.6(LL) 5.17 4599.44 6.46 4.09 ‐0.01 ‐1.92

7283 1 DL 1.82 1958.71 ‐0.29 ‐0.15 0.00 ‐0.58

2 SDL 0.54 683.55 0.27 0.29 0.00 ‐0.24

3 LL 1.46 818.67 0.55 0.61 0.00 ‐0.54

4 1.4(DL+SDL) 3.30 3699.17 ‐0.02 0.19 0.00 ‐1.15

5 1.2(DL+SDL)+1.6(LL) 5.16 4480.58 0.86 1.14 0.00 ‐

1.857284 1 DL 1.82 1964.30 ‐0.03 ‐0.02 0.00 ‐0.58

2 SDL 0.54 685.91 0.10 0.11 0.00 ‐0.24

3 LL 1.46 821.24 0.23 0.22 0.00 ‐0.55

4 1.4(DL+SDL) 3.29 3710.30 0.11 0.12 0.00 ‐1.15

5 1.2(DL+SDL)+1.6(LL) 5.16 4494.24 0.45 0.46 0.00 ‐1.86

7285 1 DL 1.82 1963.73 ‐0.01 0.00 0.00 ‐0.58

2 SDL 0.54 685.66 0.04 0.04 0.00 ‐0.24

3 LL 1.46 820.99 0.07 0.08 0.00 ‐0.55

4 1.4(DL+SDL) 3.29 3709.15 0.04 0.06 0.00 ‐1.15

5 1.2(DL+SDL)+1.6(LL) 5.16 4492.85 0.15 0.18 0.00 ‐1.86

7286 1 DL 1.82 1963.79 0.00 0.01 0.00 ‐0.58

2 SDL 0.54 685.69 0.01 0.02 0.00 ‐0.24

3 LL 1.46 821.01 0.03 0.03 0.00 ‐0.55


16/202



4 1.4(DL+SDL) 3.29 3709.27 0.02 0.03 0.00 ‐1.15

5 1.2(DL+SDL)+1.6(LL) 5.16 4492.99 0.06 0.08 0.00 ‐1.86

7287 1 DL 1.82 1963.78 0.00 0.00 0.00 ‐0.58

2 SDL 0.54 685.69 0.01 0.01 0.00 ‐0.24

3 LL 1.46 821.01 0.01 0.01 0.00 ‐

0.554 1.4(DL+SDL) 3.29 3709.25 0.01 0.01 0.00 ‐1.15

5 1.2(DL+SDL)+1.6(LL) 5.16 4492.97 0.02 0.03 0.00 ‐1.86

7288 1 DL 1.82 1963.79 0.00 0.00 0.00 ‐0.58

2 SDL 0.54 685.69 0.00 0.00 0.00 ‐0.24

3 LL 1.46 821.01 0.00 0.00 0.00 ‐0.55

4 1.4(DL+SDL) 3.29 3709.28 0.00 0.00 0.00 ‐1.15

5 1.2(DL+SDL)+1.6(LL) 5.16 4493.00 0.00 0.00 0.00 ‐1.86

7289 1 DL 1.82 1963.79 ‐0.01 ‐0.01 0.00 ‐0.58

2 SDL 0.54 685.69 0.00 0.00 0.00 ‐0.24

3 LL 1.46 821.02 ‐0.01 ‐0.01 0.00 ‐0.55

4 1.4(DL+SDL) 3.29 3709.28 ‐0.01 ‐0.02 0.00 ‐1.15

5 1.2(DL+SDL)+1.6(LL) 5.16 4493.01 ‐0.02 ‐0.03 0.00 ‐1.86

7290 1 DL 1.82 1963.78 ‐0.01 ‐0.02 0.00 ‐0.58

2 SDL 0.54 685.69 ‐0.01 ‐0.01 0.00 ‐0.24

3 LL 1.46 821.01 ‐0.02 ‐0.02 0.00 ‐0.55

4 1.4(DL+SDL) 3.29 3709.25 ‐0.03 ‐0.04 0.00 ‐1.15

5 1.2(DL+SDL)+1.6(LL) 5.16 4492.97 ‐0.05 ‐0.07 0.00 ‐1.86

7291 1 DL 1.82 1963.79 ‐0.03 ‐0.04 0.00 ‐0.58

2 SDL 0.54 685.69 ‐0.02 ‐0.03 0.00 ‐0.24

3 LL 1.46 821.01 ‐0.04 ‐0.05 0.00 ‐0.55

4 1.4(DL+SDL) 3.29 3709.28 ‐

0.07 ‐

0.09 0.00 ‐

1.15

5 1.2(DL+SDL)+1.6(LL) 5.16 4493.00 ‐0.12 ‐0.15 0.00 ‐1.86

7292 1 DL 1.82 1963.70 ‐0.07 ‐0.08 0.00 ‐0.58

2 SDL 0.54 685.65 ‐0.06 ‐0.06 0.00 ‐0.24

3 LL 1.46 820.97 ‐0.11 ‐0.12 0.00 ‐0.55

4 1.4(DL+SDL) 3.29 3709.08 ‐0.17 ‐0.20 0.00 ‐1.15

5 1.2(DL+SDL)+1.6(LL) 5.16 4492.77 ‐0.33 ‐0.36 0.00 ‐1.86

7293 1 DL 1.82 1964.40 ‐0.20 ‐0.20 0.00 ‐0.58

2 SDL 0.54 685.96 ‐0.16 ‐0.16 0.00 ‐0.24

3 LL 1.46 821.29 ‐0.35 ‐0.34 0.00 ‐0.55

4 1.4(DL+SDL) 3.29 3710.51 ‐

0.50 ‐

0.50 0.00 ‐

1.155 1.2(DL+SDL)+1.6(LL) 5.16 4494.49 ‐0.98 ‐0.97 0.00 ‐1.86

7294 1 DL 1.82 1957.15 ‐0.30 ‐0.47 0.00 ‐0.58

2 SDL 0.54 682.90 ‐0.43 ‐0.45 0.00 ‐0.24

3 LL 1.46 817.96 ‐0.87 ‐0.95 0.00 ‐0.54

4 1.4(DL+SDL) 3.30 3696.06 ‐1.01 ‐1.28 0.00 ‐1.15

5 1.2(DL+SDL)+1.6(LL) 5.17 4476.79 ‐2.25 ‐2.61 0.00 ‐1.85

7295 1 DL 1.81 2024.95 ‐3.17 ‐1.80 0.00 ‐0.61

2 SDL 0.54 710.50 ‐1.92 ‐1.50 0.00 ‐0.25

3 LL 1.46 849.36 ‐4.34 ‐3.22 0.00 ‐0.57

4 1.4(DL+SDL) 3.29 3829.63 ‐7.13 ‐4.62 0.01 ‐1.21

5 1.2(DL+SDL)+1.6(LL) 5.16 4641.52 ‐13.05 ‐9.10 0.01 ‐1.94

7296 1 DL 1.02 1561.38 ‐15.29 ‐10.26 0.01 ‐0.40

2 SDL 0.37 536.70 ‐0.75 ‐3.55 0.01 ‐0.19


17/202



3 LL 1.00 643.00 ‐1.53 ‐7.98 0.01 ‐0.46

4 1.4(DL+SDL) 1.94 2937.31 ‐22.45 ‐19.33 0.02 ‐0.83

5 1.2(DL+SDL)+1.6(LL) 3.26 3546.50 ‐21.69 ‐29.33 0.03 ‐1.44

8489 1 DL ‐1.74 1753.87 14.28 5.26 0.02 0.80

2 SDL ‐

1.43 613.18 0.48 2.31 0.01 1.103 LL ‐3.24 734.27 0.98 5.21 0.01 2.38

4 1.4(DL+SDL) ‐4.44 3313.87 20.66 10.60 0.03 2.66

5 1.2(DL+SDL)+1.6(LL) ‐8.99 4015.29 19.28 17.42 0.04 6.08

8490 1 DL ‐3.06 2043.67 0.46 ‐0.26 0.00 1.55

2 SDL ‐1.75 717.91 1.25 0.97 0.00 1.30

3 LL ‐3.99 857.53 2.83 2.08 0.00 2.79

4 1.4(DL+SDL) ‐6.73 3866.21 2.39 1.00 0.00 3.99

5 1.2(DL+SDL)+1.6(LL) ‐12.16 4685.94 6.57 4.19 0.00 7.89

8491 1 DL ‐2.97 1994.65 ‐0.27 ‐0.15 0.00 1.44

2 SDL ‐1.72 697.90 0.27 0.29 0.00 1.27

3 LL ‐3.94 834.82 0.56 0.61 0.00 2.73

4 1.4(DL+SDL) ‐6.56 3769.57 0.00 0.20 0.00 3.80

5 1.2(DL+SDL)+1.6(LL) ‐11.92 4566.77 0.89 1.15 0.00 7.62

8492 1 DL ‐2.97 1999.73 ‐0.03 ‐0.02 0.00 1.45

2 SDL ‐1.72 700.05 0.10 0.11 0.00 1.28

3 LL ‐3.94 837.17 0.23 0.22 0.00 2.73

4 1.4(DL+SDL) ‐6.57 3779.70 0.11 0.12 0.00 3.81

5 1.2(DL+SDL)+1.6(LL) ‐11.94 4579.22 0.45 0.45 0.00 7.64

8493 1 DL ‐2.97 1999.28 ‐0.01 0.00 0.00 1.45

2 SDL ‐1.72 699.85 0.04 0.04 0.00 1.28

3 LL ‐

3.94 836.97 0.07 0.08 0.00 2.73

4 1.4(DL+SDL) ‐6.57 3778.79 0.04 0.05 0.00 3.81

5 1.2(DL+SDL)+1.6(LL) ‐11.94 4578.11 0.15 0.16 0.00 7.64

8494 1 DL ‐2.97 1999.32 0.00 0.00 0.00 1.45

2 SDL ‐1.72 699.87 0.01 0.02 0.00 1.28

3 LL ‐3.94 836.98 0.03 0.03 0.00 2.73

4 1.4(DL+SDL) ‐6.57 3778.87 0.02 0.03 0.00 3.81

5 1.2(DL+SDL)+1.6(LL) ‐11.94 4578.20 0.06 0.07 0.00 7.64

8495 1 DL ‐2.97 1999.31 0.00 0.00 0.00 1.45

2 SDL ‐1.72 699.87 0.01 0.01 0.00 1.28

3 LL ‐

3.94 836.98 0.01 0.01 0.00 2.734 1.4(DL+SDL) ‐6.57 3778.86 0.01 0.01 0.00 3.81

5 1.2(DL+SDL)+1.6(LL) ‐11.94 4578.19 0.02 0.03 0.00 7.64

8496 1 DL ‐2.97 1999.33 0.00 0.00 0.00 1.45

2 SDL ‐1.72 699.88 0.00 0.00 0.00 1.28

3 LL ‐3.94 836.99 0.00 0.00 0.00 2.73

4 1.4(DL+SDL) ‐6.57 3778.88 0.00 0.00 0.00 3.81

5 1.2(DL+SDL)+1.6(LL) ‐11.94 4578.22 0.00 0.00 0.00 7.64

8497 1 DL ‐2.97 1999.33 ‐0.01 ‐0.01 0.00 1.45

2 SDL ‐1.72 699.88 0.00 0.00 0.00 1.28

3 LL ‐3.94 836.99 0.00 ‐0.01 0.00 2.73

4 1.4(DL+SDL) ‐6.57 3778.88 ‐0.01 ‐0.02 0.00 3.81

5 1.2(DL+SDL)+1.6(LL) ‐11.94 4578.22 ‐0.02 ‐0.02 0.00 7.64

8498 1 DL ‐2.97 1999.31 ‐0.01 ‐0.02 0.00 1.45


18/202



2 SDL ‐1.72 699.87 ‐0.01 ‐0.01 0.00 1.28

3 LL ‐3.94 836.98 ‐0.01 ‐0.02 0.00 2.73

4 1.4(DL+SDL) ‐6.57 3778.86 ‐0.03 ‐0.03 0.00 3.81

5 1.2(DL+SDL)+1.6(LL) ‐11.94 4578.19 ‐0.04 ‐0.06 0.00 7.64

8499 1 DL ‐

2.97 1999.32 ‐

0.03 ‐

0.03 0.00 1.452 SDL ‐1.72 699.87 ‐0.02 ‐0.02 0.00 1.28

3 LL ‐3.94 836.98 ‐0.04 ‐0.04 0.00 2.73

4 1.4(DL+SDL) ‐6.57 3778.87 ‐0.06 ‐0.08 0.00 3.81

5 1.2(DL+SDL)+1.6(LL) ‐11.94 4578.21 ‐0.12 ‐0.13 0.00 7.64

8500 1 DL ‐2.97 1999.25 ‐0.06 ‐0.07 0.00 1.45

2 SDL ‐1.72 699.84 ‐0.06 ‐0.06 0.00 1.28

3 LL ‐3.94 836.95 ‐0.11 ‐0.11 0.00 2.73

4 1.4(DL+SDL) ‐6.57 3778.73 ‐0.17 ‐0.18 0.00 3.81

5 1.2(DL+SDL)+1.6(LL) ‐11.94 4578.04 ‐0.32 ‐0.34 0.00 7.64

8501 1 DL ‐2.97 1999.79 ‐0.20 ‐0.19 0.00 1.45

2 SDL ‐1.72 700.08 ‐0.16 ‐0.16 0.00 1.28

3 LL ‐3.94 837.19 ‐0.35 ‐0.33 0.00 2.73

4 1.4(DL+SDL) ‐6.57 3779.83 ‐0.50 ‐0.49 0.00 3.81

5 1.2(DL+SDL)+1.6(LL) ‐11.94 4579.36 ‐0.98 ‐0.95 0.00 7.64

8502 1 DL ‐2.96 1993.27 ‐0.32 ‐0.47 0.00 1.43

2 SDL ‐1.72 697.33 ‐0.43 ‐0.44 0.00 1.27

3 LL ‐3.94 834.20 ‐0.88 ‐0.95 0.00 2.72

4 1.4(DL+SDL) ‐6.55 3766.85 ‐1.04 ‐1.28 0.00 3.79

5 1.2(DL+SDL)+1.6(LL) ‐11.92 4563.44 ‐2.29 ‐2.62 ‐0.01 7.61

8503 1 DL ‐3.09 2060.99 ‐3.23 ‐1.85 0.00 1.59

2 SDL ‐

1.75 724.91 ‐

1.94 ‐

1.51 0.00 1.31

3 LL ‐4.01 865.59 ‐4.36 ‐3.24 0.00 2.82

4 1.4(DL+SDL) ‐6.79 3900.26 ‐7.23 ‐4.70 0.00 4.06

5 1.2(DL+SDL)+1.6(LL) ‐12.23 4728.03 ‐13.17 ‐9.22 0.00 7.99

8504 1 DL ‐0.96 1580.31 ‐15.33 ‐10.37 ‐0.02 0.26

2 SDL ‐1.23 544.24 ‐0.76 ‐3.58 ‐0.01 0.96

3 LL ‐2.80 651.50 ‐1.55 ‐8.04 ‐0.02 2.08

4 1.4(DL+SDL) ‐3.06 2974.37 ‐22.52 ‐19.53 ‐0.04 1.70

5 1.2(DL+SDL)+1.6(LL) ‐7.11 3591.86 ‐21.78 ‐29.59 ‐0.06 4.79

9697 1 DL ‐14.81 1350.28 13.79 2.48 0.00 7.82

2 SDL ‐

0.56 463.68 0.34 1.60 0.00 2.893 LL ‐1.14 556.75 0.71 3.64 0.00 6.49

4 1.4(DL+SDL) ‐21.51 2539.54 19.78 5.71 0.01 14.99

5 1.2(DL+SDL)+1.6(LL) ‐20.27 3067.54 18.09 10.72 0.01 23.24

9698 1 DL ‐15.15 1572.43 ‐1.09 ‐1.29 ‐0.01 10.16

2 SDL ‐0.66 541.13 0.86 0.69 0.00 3.47

3 LL ‐1.33 647.84 1.96 1.51 ‐0.01 7.80

4 1.4(DL+SDL) ‐22.13 2958.98 ‐0.32 ‐0.84 ‐0.02 19.08

5 1.2(DL+SDL)+1.6(LL) ‐21.09 3572.81 2.86 1.69 ‐0.03 28.83

9699 1 DL ‐15.06 1547.05 ‐0.51 ‐0.44 0.00 9.90

2 SDL ‐0.64 530.84 0.20 0.21 0.00 3.41

3 LL ‐1.28 636.14 0.43 0.45 0.00 7.65

4 1.4(DL+SDL) ‐21.97 2909.05 ‐0.44 ‐0.33 0.01 18.64

5 1.2(DL+SDL)+1.6(LL) ‐20.88 3511.29 0.31 0.44 0.01 28.22


19/202



9700 1 DL ‐15.07 1549.27 ‐0.14 ‐0.13 0.00 9.92

2 SDL ‐0.64 531.78 0.07 0.07 0.00 3.41

3 LL ‐1.28 637.17 0.16 0.15 0.00 7.66

4 1.4(DL+SDL) ‐21.99 2913.47 ‐0.09 ‐0.08 0.00 18.67

5 1.2(DL+SDL)+1.6(LL) ‐

20.90 3516.73 0.18 0.17 0.00 28.269701 1 DL ‐15.07 1549.08 ‐0.05 ‐0.04 0.00 9.92

2 SDL ‐0.64 531.70 0.02 0.03 0.00 3.41

3 LL ‐1.28 637.08 0.05 0.05 0.00 7.66

4 1.4(DL+SDL) ‐21.98 2913.10 ‐0.03 ‐0.02 0.00 18.67

5 1.2(DL+SDL)+1.6(LL) ‐20.89 3516.27 0.06 0.06 0.00 28.26

9702 1 DL ‐15.07 1549.10 ‐0.01 ‐0.01 0.00 9.92

2 SDL ‐0.64 531.71 0.01 0.01 0.00 3.41

3 LL ‐1.28 637.09 0.02 0.02 0.00 7.66

4 1.4(DL+SDL) ‐21.98 2913.13 ‐0.01 0.00 0.00 18.67

5 1.2(DL+SDL)+1.6(LL) ‐20.89 3516.31 0.02 0.03 0.00 28.26

9703 1 DL ‐15.07 1549.09 0.00 0.00 0.00 9.92

2 SDL ‐0.64 531.71 0.00 0.00 0.00 3.41

3 LL ‐1.28 637.09 0.01 0.01 0.00 7.66

4 1.4(DL+SDL) ‐21.98 2913.12 0.00 0.00 0.00 18.67

5 1.2(DL+SDL)+1.6(LL) ‐20.89 3516.31 0.01 0.01 0.00 28.26

9704 1 DL ‐15.07 1549.10 0.00 0.00 0.00 9.92

2 SDL ‐0.64 531.71 0.00 0.00 0.00 3.41

3 LL ‐1.28 637.09 0.00 0.00 0.00 7.66

4 1.4(DL+SDL) ‐21.98 2913.14 0.00 0.00 0.00 18.67

5 1.2(DL+SDL)+1.6(LL) ‐20.89 3516.33 0.00 0.00 0.00 28.26

9705 1 DL ‐

15.07 1549.10 0.00 0.00 0.00 9.92

2 SDL ‐0.64 531.71 0.00 0.00 0.00 3.41

3 LL ‐1.28 637.09 0.00 0.00 0.00 7.66

4 1.4(DL+SDL) ‐21.98 2913.14 ‐0.01 ‐0.01 0.00 18.67

5 1.2(DL+SDL)+1.6(LL) ‐20.89 3516.33 ‐0.01 ‐0.01 0.00 28.26

9706 1 DL ‐15.07 1549.09 0.00 0.00 0.00 9.92

2 SDL ‐0.64 531.71 ‐0.01 ‐0.01 0.00 3.41

3 LL ‐1.28 637.09 ‐0.01 ‐0.01 0.00 7.66

4 1.4(DL+SDL) ‐21.98 2913.12 ‐0.01 ‐0.01 0.00 18.67

5 1.2(DL+SDL)+1.6(LL) ‐20.89 3516.31 ‐0.02 ‐0.03 0.00 28.26

9707 1 DL ‐

15.07 1549.10 ‐

0.01 ‐

0.01 0.00 9.922 SDL ‐0.64 531.71 ‐0.01 ‐0.01 0.00 3.41

3 LL ‐1.28 637.09 ‐0.03 ‐0.03 0.00 7.66

4 1.4(DL+SDL) ‐21.98 2913.13 ‐0.03 ‐0.03 0.00 18.67

5 1.2(DL+SDL)+1.6(LL) ‐20.89 3516.31 ‐0.07 ‐0.07 0.00 28.26

9708 1 DL ‐15.07 1549.07 ‐0.01 ‐0.02 0.00 9.92

2 SDL ‐0.64 531.69 ‐0.04 ‐0.04 0.00 3.41

3 LL ‐1.28 637.08 ‐0.08 ‐0.08 0.00 7.66

4 1.4(DL+SDL) ‐21.98 2913.06 ‐0.07 ‐0.08 0.00 18.67

5 1.2(DL+SDL)+1.6(LL) ‐20.89 3516.23 ‐0.19 ‐0.20 0.00 28.26

9709 1 DL ‐15.07 1549.28 ‐0.04 ‐0.04 0.00 9.92

2 SDL ‐0.64 531.79 ‐0.11 ‐0.11 0.00 3.41

3 LL ‐1.28 637.17 ‐0.26 ‐0.24 0.00 7.66

4 1.4(DL+SDL) ‐21.99 2913.50 ‐0.21 ‐0.21 0.00 18.67


20/202



5 1.2(DL+SDL)+1.6(LL) ‐20.90 3516.77 ‐0.59 ‐0.57 0.00 28.26

9710 1 DL ‐15.06 1546.45 0.03 ‐0.06 ‐0.01 9.90

2 SDL ‐0.64 530.59 ‐0.33 ‐0.33 0.00 3.41

3 LL ‐1.28 635.87 ‐0.69 ‐0.72 0.00 7.65

4 1.4(DL+SDL) ‐

21.97 2907.86 ‐

0.42 ‐

0.54 ‐

0.01 18.635 1.2(DL+SDL)+1.6(LL) ‐20.87 3509.85 ‐1.46 ‐1.61 ‐0.02 28.20

9711 1 DL ‐15.19 1581.54 ‐0.99 ‐0.36 0.02 10.26

2 SDL ‐0.67 544.79 ‐1.38 ‐1.11 0.01 3.49

3 LL ‐1.35 652.08 ‐3.11 ‐2.42 0.01 7.86

4 1.4(DL+SDL) ‐22.20 2976.87 ‐3.32 ‐2.06 0.04 19.25

5 1.2(DL+SDL)+1.6(LL) ‐21.19 3594.93 ‐7.83 ‐5.64 0.05 29.06

9712 1 DL ‐14.55 1217.96 ‐14.61 ‐6.37 0.00 6.31

2 SDL ‐0.49 411.16 ‐0.55 ‐2.56 0.00 2.50

3 LL ‐1.00 493.75 ‐1.16 ‐5.81 0.00 5.66

4 1.4(DL+SDL) ‐21.05 2280.77 ‐21.22 ‐12.51 0.00 12.34

5 1.2(DL+SDL)+1.6(LL) ‐19.65 2744.94 ‐20.05 ‐20.01 0.00 19.62

‐ 22.20 4728.03 20.73 17.42 0.41 29.06

‐ ‐22.20 227.32 ‐22.52 ‐29.59 ‐0.41 ‐29.06

Max.

Min


21/202

Date : 4-2-2015

6.0 Foundation Design

[1.1] Calculation o f base area of footing.

(The base area of footing is determined using service loads (unfactored loads) with the

permissible soil pressure.

MZ Z-Axis

1 2 Top of soil

0.75

B = 2.50 0.75 X-Axis

FX

Mx 0.75

FZ

4 3

L = 2.50 Fig: Elevation

Fig:Plan of foundation

1.2 : Section properties : 1.3 : Material properties :

Length of found (L) = 2.5 m Grade of concrete = 35 N/mm2

Width of found.(B) = 2.5 m Grade of reinforcement = 415 N/mm2

Depth of found.(D) = 0.75 m Density of concrete = 24 KN/m3

Length of col.(l) = 0.750 m Density of soil filling = 18 KN/m3

Breadth of col.(b) = 0.75 m

Depth of soil above found.(D') = 0.75 m

Section modulus about x-axis (ZX) = 2.604 m3

Section modulus about Z-axis (ZZ) = 2.604 m3

1.4 : Loading data : (refer page no. )

Vertical force at foundation top (P) = 3651 KN

Moment about X-axis(MX1) = 7 KN-m

Moment about Z-axis(MZ1) = 6 KN-m

Horizontal force in Perpendicular to X -direction at foundation top (FZ) = 9 KN

Horizontal force in Perpendicular to Z -direction at foundation top (FX) = 10 KN

Total Moment in X direction (MX = MX1 + FZ x D) = 13.75 KN-m

Total Moment in Z direction (MZ = MZ1 + FX x D) = 13.50 KN-m

Additional wt of found. = 2.5 x 2.5 x 0.8 x 6.0 = 28.13 KN

Wt of soil above = 2.5 x 2.5 x 0.8 x 18.0 = 76.78 KN

foundation - 0.8 x 0.8 x 0.8 x 18.0

Total axial load = 3651 + 28.125 + 76.78 = 3756 KN

1.5 : Check for overturning about X axis :

Overturning moment about x axis (MX) = 13.75 KN-m

Restoring moment = 3756 x 2.5 = 4695 KN-m

2

Factor of safety against overturning = 4695 = 341.45 > 2 Safe

13.75

1.6 : Check for overturning about Z axis :

Overturning moment about y axis (MZ) = 13.50 KN-m

Restoring moment = 3756 x 2.5 = 4695 KN-m2

Factor of safety against overturning = 4695 = 347.77 > 2 Safe

13.50

2.50

0.75

ABV ROCK GROUP

Design Calculation SheetCLIENT : KACST

PROJECT DESCRIPTION : Extended Car Parking

Title : Design of isolated footing


22/202

Date : 4-2-2015

Total axial load (P) = 3756 KN = 800 KN/m2

Moment about X-axis(MX) = 13.75 KN-m

Moment about Z-axis(MZ) = 13.50 KN-m

Base pressure = P MX MY

A ZX ZZ

q = 3756 13.75 13.50 q(maximum) = 611.41 KN/m2

SAFE

6.25 2.604 2.604 q(minimum) = 590.48 KN/m2

SAFE

q = 600.95 ± 5.28 ± 5.18 600.95

CL 2.0 : Design of foundation for bending about X axis

Factored Load = 4728 `

Assumed Factor of safety = 1.3 =

Base pressure = 611.41 x 1.3 = 792 KN/m2

2.1 : Criticle section for moment about x-axis : (Assuming the unit meter wide stri

MU = 792 x 0.875 x 0.875 x 1.00 = 303.10 KN-m

2

Reqd. u = MU x b x d

2

D = 0.75 m = 750 mm

d = 750 - 50 - 16 = 692 mm

2

Assume clear cover = 50 mm

Reqd. u = 303.10 x 1000000 = 0.703 N/mm2

0.9 x 1000 x 692 2

= 0.85 x fc' 1 - 1 - 2 x u

fy 0.85 x fc'

= 0.85 x 35 1 - 1 - 2 x 0.703

415 0.85 x 35

= 0.072 ( 1 - 0.9761 ) = 0.0017 min = 0.00183

Provide = 0.0018

Required A = 0.0018 x 1000 x 692 = 1266 mm2 perpendicular to X-axis for

Required Dia 16 @ c/c unit meter length.

Provide Dia 16 @ c/c

Fcatored Load/Working Load

± ±

159

150

± ±

Net allowable

bearing pressure

ABV ROCK GROUP





23/202

Date : 4-2-2015

Base pressure = 611.41 x 1.3 = 792 KN/m2

3.1 : Criticle section for moment about z-axis :MU = 792 x 0.875 x 0.875 x 1.00 = 303.10 KN-m

2

Reqd. u = MU

x b x d2

D = 0.75 m = 750 mm

d = 750 - 50 - 16 - 16 = 676 mm

2

Assume clear cover = 50 mm

Reqd. u = 303.10 x 1000000 = 0.737 N/mm2

0.9 x 1000 x 676 2

= 0.85 x fc' 1 - 1 - 2 x u

fy 0.85 x fc'

= 0.85 x 35 1 - 1 - 2 x 0.737

415 0.85 x 35

= 0.072 ( 1 - 0.9749 ) = 0.0018 min = 0.00183

Provide = 0.0018

Required Ast = 0.0018 x 1000 x 676 = 1237 mm perpendicular to Z-axis for

Required Dia 16 @ c/c unit meter length.

Provide Dia 16 @ c/c

[4.0] Design for shear st rength.[4.1]: Wide-beam action fo r footing about z-axis :

Z-Axis Critical section

for one way shear

for one way shear

B

d 0.75 d

0.75

2.50 L

dCritical section wil l be at one effective depth from face of column about z-axis

L. arm = 2.5 - 0.75 - 0.692 x 2 = 0.183 m

2

Vu = 611.41 x 0.183 x 1.29 = 144.89 KN 1 KN = 0.224809 Kips)

= 32.57 kips

b = 2500.0 = 98.43 inch

d = 692 = 27.24 inch

Vu < x Vc

< x 2 x f c'

x bw x d

< 0.85 x 2 x 5072 x 98.43 x 27.24 < 325 kips

Here Vu < x Vc O.K = KN1455

X-Axis

162

150

Critical section

Z Axis

CLIENT : KACST



ABV ROCK GROUP

Design Calculation Sheet


24/202

Date : 4-2-2015

X-Axis Critical section

for one way shear

for one way shear

L

d 0.8 d

0.75

2.5 B

d

Critical section wi ll be at one effective depth from face of column about X-axis

L. arm = 2.5 - 0.75 - 0.676 x 2 = 0.199 m

2

u = . x . x . = . = . ps

= 35.42 kipsb = 2500.0 = 98.43 inch

d = 676 = 26.61 inch

u < x Vc

< x 2 x f c x bw x d

< 0.85 x 2 x 5072 x 98.43 x 26.61 < 317 kips

Here Vu < x Vc O.K = 1421 KN

[5.0]Two way action for foot ing: Z-Axis

Critical section

for two way shear

B

d/2 0.8 d/2

0.75

2.5 L

d/2

Critical section will be at half effective depth from face of column

u = 611.41 x[( 2.5 x 2.50 )-( 1.442 x 1.426 )]

= 2564.07 KN = 576.43 kips

Equation-1 :

u < x Vn

< x 2 + 4 x f c x bo x dc

Equation-2 :

But not greater than

x( 4 x f c x bo x d )

c = 0.75 = 1.00

0.75

o = 2 x( C1 + C2 )+ 4 x d

= 2 x( 0.75 + 0.75 )+ 4 x 0.692

= 5.768 m = 227.087 inch

2 + 4 = 2 + 4 = 6.0c 1.00

Use equation -2

u < x( 4 x c x o x d )

< 0.85 x( 4 x 5072 x 227.087 x 27.24 )

< 1498.00 kips

Two way action shear strength is O.K

ABV ROCK GROUP




X-Axis

Critical section

for two way shear

X Axis

Critical section

Z-Axis


25/202

7.0 FLAT SLAB @ CP. 1 Level

DATAL1 = 30 ft. 104 psf = 5 KN/M

2

L2 = 30 ft. 14 psf = 0.65 KN/M2

C1 = 30 in. 42 psf = 2 KN/M2

C2 = 30 in.

Ln = 27.5 ft.

fc' = 4,354 psi = 30 N/mm2

fy = 60,000 psi = 415 N/mm2

DESIGNPreliminary design of slab thickness "h"

a) Control of deflection

h = Ln / 33 = 11 in.

This is larger than the 5 in. minimum specified for slabs without drop panels.

Therefore use a slab thickness

h = 11.8 in. = 300 mm

Average effective depth = d = h - 0.75 - 1/2" bar = 10.55 in.

b) Shear strength of slab

Factored dead load = wd = (h*12.5+FF+SD)*1.2 = 243 psf

Factored live load = wl = LL*1.6 = 167 psf

Total factored load = wu = 411 psf

Investigation for wide beam action on 12" wide strip at "d" distance from face of support

L1/2 - C1/2 - d = 12.87 ft.

Vu = 5.28 kip

Vc = 2* f c' *bw*d = 16.71 kip

Vc =0.85*Vc= 14.20 kip

5.28 is less than 14.20

Shear strength in two way action at d/2 distance around a support

bo = 4*(C1+d/2+d/2) = 162.2 in.

Vu = wu*[L1*L2 - ((C1+d/2+d/2)/12)2] = 364.80 kip

Vc = 4* fc' *bo*d = 451.66 kip

Vc =0.85*Vc= 383.91 kip364.80 is less than 383.91

OK

OK

Live Load

Finishes

Super Dead


26/202

Factored moments in slab

Total factored moment per span

Mo = wu*L2*Ln2 / 8 = 1164.3 k-ft.

Distribution of the total factored moment Mo per span into negative and positive moments

TOTAL MOMENT COLUMN STRIP MIDDLE STRIP

( k-ft.) MOMENT ( k-ft ) MOMENT ( k-ft )

End span:

Exterior Negative 0.26*Mo= 302.7 0.26*Mo= 302.7 0

Positive 0.52*Mo= 605.4 0.31*Mo= 360.9 0.21*Mo= 244.5

Interior Negative 0.70*Mo= 815.0 0.53*Mo= 617.1 0.17*Mo= 197.9

Interior span:

Positive 0.35*Mo= 407.5 0.21*Mo= 244.5 0.14*Mo= 163.0

Negative 0.65*Mo= 756.8 0.49*Mo= 570.5 0.16*Mo= 186.3

Spacing of Spacing of

SPAN LOCATION Mu (kN-m) b (mm) d (mm) As (mm2) As (min.)) D16, mm D20, mm

(mm ) provided provided

END SPAN

COLUMN Exterior Negative 410.3 4500 264 4291.4 2427.7 200

STRIP Positive 489.2 4500 264 5147.8 2427.7 150

Interior Negative 836.4 4500 264 9052.3 2427.7 150

MIDDLE Exterior Negative 0 4500 264 0.0 2427.7 200

STRIP Positive 331.4 4500 264 3445.6 2427.7 200

Interior Negative 268.3 4500 264 2776.2 2427.7 200

INTERIOR SPAN

COLUMN Interior Negative 773.3 4500 264 8324.9 2427.7 150

STRIP Positive 331.4 4500 264 3445.6 2427.7 200

.

MIDDLE Interior Negative 252.5 4500 264 2609.9 2427.7 200

STRIP Positive 220.9 4500 264 2278.4 2427.7 200


27/202

FLAT SLAB @ Gantry Level

DATAL1 = 30 ft. 104 psf = 5 KN/M

2

L2 = 30 ft. 15 psf = 0.7 KN/M2

C1 = 30 in. 104 psf = 5 KN/M2

C2 = 30 in.

Ln = 27.5 ft.

fc' = 4,354 psi = 30 N/mm2

fy = 60,000 psi = 415 N/mm2

DESIGNPreliminary design of slab thickness "h"

a) Control of deflection

h = Ln / 33 = 11 in.

This is larger than the 5 in. minimum specified for slabs without drop panels.

Therefore use a slab thickness

h = 15.74 in. = 400 mm

Average effective depth = d = h - 0.75 - 1/2" bar = 14.49 in.

b) Shear strength of slab

Factored dead load = wd = (h*12.5+FF+SD)*1.2 = 379 psf

Factored live load = wl = LL*1.6 = 167 psf

Total factored load = wu = 546 psf

Investigation for wide beam action on 12" wide strip at "d" distance from face of support

L1/2 - C1/2 - d = 12.54 ft.

Vu = 6.85 kip

Vc = 2* f c' *bw*d = 22.95 kip

Vc =0.85*Vc= 19.50 kip

6.85 is less than 19.50

Shear strength in two way action at d/2 distance around a support

bo = 4*(C1+d/2+d/2) = 177.96 in.

Vu = wu*[L1*L2 - ((C1+d/2+d/2)/12)2] = 483.98 kip

Vc = 4* fc' *bo*d = 680.60 kip

Vc =0.85*Vc= 578.51 kip483.98 is less than 578.51

OK

OK

Live Load

Finishes

Super Dead


28/202


29/202

STAAD SPACE

START JOB INFORMATION

ENGINEER DATE 05-Feb-15

END JOB INFORMATION

INPUT WIDTH 79

UNIT METER KN

JOINT COORDINATES

1 0.300001 6.00001 -6.00001; 2 0.300001 6.00001 -4.50001; 3 0.300001 6.00001 0;

4 0.300001 6.00001 1.5; 5 0.300001 6.00001 9.00002; 6 0.300001 6.00001 10.5;

7 0.300001 6.00001 18; 8 0.300001 6.00001 19.5; 9 0.300001 6.00001 27.0001;

10 0.300001 6.00001 28.5001; 11 0.300001 6.00001 36.0001;

12 0.300001 6.00001 37.5001; 13 0.300001 6.00001 45.0001;14 0.300001 6.00001 46.5001; 15 0.300001 6.00001 54.0001;

16 0.300001 6.00001 55.5001; 17 0.300001 6.00001 63.0001;

18 0.300001 6.00001 64.5001; 19 0.300001 6.00001 72.0002;

20 0.300001 6.00001 73.5002; 21 0.300001 6.00001 81.0002;

22 0.300001 6.00001 82.5002; 23 0.300001 6.00001 90.0002;

24 0.300001 6.00001 91.5002; 25 0.300001 6.00001 99.0002;

26 0.300001 6.00001 100.5; 27 0.300001 6.00001 108; 28 0.300001 6.00001 109.5;

29 0.300001 6.00001 117; 30 0.300001 6.00001 118.5; 31 0.300001 6.00001 126;

32 0.300001 6.00001 127.5; 33 0.300001 6.00001 135; 34 0.300001 6.00001 139.5;

35 0.300001 11.1 -6.00001; 36 0.300001 11.1 0; 37 0.300001 11.1 9.00002;

38 0.300001 11.1 18; 39 0.300001 11.1 27.0001; 40 0.300001 11.1 36.0001;

41 0.300001 11.1 45.0001; 42 0.300001 11.1 54.0001; 43 0.300001 11.1 63.0001;

44 0.300001 11.1 72.0002; 45 0.300001 11.1 81.0002; 46 0.300001 11.1 90.0002;

47 0.300001 11.1 99.0002; 48 0.300001 11.1 108; 49 0.300001 11.1 117;

50 0.300001 11.1 126; 51 0.300001 11.1 135; 52 0.300001 11.1 139.5;

53 0.300001 11.1 -4.50001; 54 0.300001 11.1 1.5; 55 0.300001 11.1 10.5;

56 0.300001 11.1 19.5; 57 0.300001 11.1 28.5001; 58 0.300001 11.1 37.5001;

59 0.300001 11.1 46.5001; 60 0.300001 11.1 55.5001; 61 0.300001 11.1 64.5001;

62 0.300001 11.1 73.5002; 63 0.300001 11.1 82.5002; 64 0.300001 11.1 91.5002;

65 0.300001 11.1 100.5; 66 0.300001 11.1 109.5; 67 0.300001 11.1 118.5;

68 0.300001 11.1 127.5; 69 0.300001 6.00001 -3.00001;

70 0.300001 6.00001 3.00001; 71 0.300001 6.00001 4.50001;

72 0.300001 6.00001 6.00001; 73 0.300001 6.00001 12; 74 0.300001 6.00001 13.5;

75 0.300001 6.00001 15; 76 0.300001 6.00001 21; 77 0.300001 6.00001 22.5;

78 0.300001 6.00001 24; 79 0.300001 6.00001 30.0001;

80 0.300001 6.00001 31.5001; 81 0.300001 6.00001 33.0001;

82 0.300001 6.00001 39.0001; 83 0.300001 6.00001 40.5001;

84 0.300001 6.00001 42.0001; 85 0.300001 6.00001 48.0001;

86 0.300001 6.00001 49.5001; 87 0.300001 6.00001 51.0001;

88 0.300001 6.00001 57.0001; 89 0.300001 6.00001 58.5001;

90 0.300001 6.00001 60.0001; 91 0.300001 6.00001 66.0001;

ANNEXURE-A

Staad Input File


30/202

92 0.300001 6.00001 67.5001; 93 0.300001 6.00001 69.0001;

94 0.300001 6.00001 75.0002; 95 0.300001 6.00001 76.5002;

96 0.300001 6.00001 78.0002; 97 0.300001 6.00001 84.0002;

98 0.300001 6.00001 85.5002; 99 0.300001 6.00001 87.0002;

100 0.300001 6.00001 93.0002; 101 0.300001 6.00001 94.5002;

102 0.300001 6.00001 96.0002; 103 0.300001 6.00001 102;

104 0.300001 6.00001 103.5; 105 0.300001 6.00001 105; 106 0.300001 6.00001 111;

107 0.300001 6.00001 112.5; 108 0.300001 6.00001 114; 109 0.300001 6.00001 120;

110 0.300001 6.00001 121.5; 111 0.300001 6.00001 123; 112 0.300001 6.00001 129;

113 0.300001 6.00001 130.5; 114 0.300001 6.00001 132;

115 0.300001 6.00001 136.5; 116 0.300001 6.00001 138;

117 0.300001 11.1 -3.00001; 118 0.300001 11.1 3.00001;

119 0.300001 11.1 4.50001; 120 0.300001 11.1 6.00001; 121 0.300001 11.1 12;

122 0.300001 11.1 13.5; 123 0.300001 11.1 15; 124 0.300001 11.1 21;

125 0.300001 11.1 22.5; 126 0.300001 11.1 24; 127 0.300001 11.1 30.0001;

128 0.300001 11.1 31.5001; 129 0.300001 11.1 33.0001;130 0.300001 11.1 39.0001; 131 0.300001 11.1 40.5001;

132 0.300001 11.1 42.0001; 133 0.300001 11.1 48.0001;

134 0.300001 11.1 49.5001; 135 0.300001 11.1 51.0001;

136 0.300001 11.1 57.0001; 137 0.300001 11.1 58.5001;

138 0.300001 11.1 60.0001; 139 0.300001 11.1 66.0001;

140 0.300001 11.1 67.5001; 141 0.300001 11.1 69.0001;

142 0.300001 11.1 75.0002; 143 0.300001 11.1 76.5002;

144 0.300001 11.1 78.0002; 145 0.300001 11.1 84.0002;

146 0.300001 11.1 85.5002; 147 0.300001 11.1 87.0002;

148 0.300001 11.1 93.0002; 149 0.300001 11.1 94.5002;

150 0.300001 11.1 96.0002; 151 0.300001 11.1 102; 152 0.300001 11.1 103.5;

153 0.300001 11.1 105; 154 0.300001 11.1 111; 155 0.300001 11.1 112.5;

156 0.300001 11.1 114; 157 0.300001 11.1 120; 158 0.300001 11.1 121.5;

159 0.300001 11.1 123; 160 0.300001 11.1 129; 161 0.300001 11.1 130.5;

162 0.300001 11.1 132; 163 0.300001 11.1 136.5; 164 0.300001 11.1 138;

165 0.300001 6.00001 -1.5; 166 0.300001 6.00001 7.50002;

167 0.300001 6.00001 16.5; 168 0.300001 6.00001 25.5001;

169 0.300001 6.00001 34.5001; 170 0.300001 6.00001 43.5001;

171 0.300001 6.00001 52.5001; 172 0.300001 6.00001 61.5001;

173 0.300001 6.00001 70.5001; 174 0.300001 6.00001 79.5002;

175 0.300001 6.00001 88.5002; 176 0.300001 6.00001 97.5002;

177 0.300001 6.00001 106.5; 178 0.300001 6.00001 115.5;

179 0.300001 6.00001 124.5; 180 0.300001 6.00001 133.5; 181 0.300001 11.1 -1.5;

182 0.300001 11.1 7.50002; 183 0.300001 11.1 16.5; 184 0.300001 11.1 25.5001;

185 0.300001 11.1 34.5001; 186 0.300001 11.1 43.5001;

187 0.300001 11.1 52.5001; 188 0.300001 11.1 61.5001;

189 0.300001 11.1 70.5001; 190 0.300001 11.1 79.5002;

191 0.300001 11.1 88.5002; 192 0.300001 11.1 97.5002; 193 0.300001 11.1 106.5;

194 0.300001 11.1 115.5; 195 0.300001 11.1 124.5; 196 0.300001 11.1 133.5;

197 1.8 6.00001 -6.00001; 198 1.8 6.00001 -4.50001; 199 1.8 6.00001 1.5;

200 1.8 6.00001 3.00001; 201 1.8 6.00001 10.5; 202 1.8 6.00001 12;


31/202

203 1.8 6.00001 19.5; 204 1.8 6.00001 21; 205 1.8 6.00001 28.5001;

206 1.8 6.00001 30.0001; 207 1.8 6.00001 37.5001; 208 1.8 6.00001 39.0001;

209 1.8 6.00001 46.5001; 210 1.8 6.00001 48.0001; 211 1.8 6.00001 55.5001;

212 1.8 6.00001 57.0001; 213 1.8 6.00001 64.5001; 214 1.8 6.00001 66.0001;

215 1.8 6.00001 73.5002; 216 1.8 6.00001 75.0002; 217 1.8 6.00001 82.5002;

218 1.8 6.00001 84.0002; 219 1.8 6.00001 91.5002; 220 1.8 6.00001 93.0002;

221 1.8 6.00001 100.5; 222 1.8 6.00001 102; 223 1.8 6.00001 109.5;

224 1.8 6.00001 111; 225 1.8 6.00001 118.5; 226 1.8 6.00001 120;

227 1.8 6.00001 127.5; 228 1.8 6.00001 129; 229 1.8 6.00001 136.5;

230 1.8 11.1 -6.00001; 231 1.8 11.1 -4.50001; 232 1.8 11.1 1.5;

233 1.8 11.1 3.00001; 234 1.8 11.1 10.5; 235 1.8 11.1 12; 236 1.8 11.1 19.5;

237 1.8 11.1 21; 238 1.8 11.1 28.5001; 239 1.8 11.1 30.0001;

240 1.8 11.1 37.5001; 241 1.8 11.1 39.0001; 242 1.8 11.1 46.5001;

243 1.8 11.1 48.0001; 244 1.8 11.1 55.5001; 245 1.8 11.1 57.0001;

246 1.8 11.1 64.5001; 247 1.8 11.1 66.0001; 248 1.8 11.1 73.5002;

249 1.8 11.1 75.0002; 250 1.8 11.1 82.5002; 251 1.8 11.1 84.0002;252 1.8 11.1 91.5002; 253 1.8 11.1 93.0002; 254 1.8 11.1 100.5;

255 1.8 11.1 102; 256 1.8 11.1 109.5; 257 1.8 11.1 111; 258 1.8 11.1 118.5;

259 1.8 11.1 120; 260 1.8 11.1 127.5; 261 1.8 11.1 129; 262 1.8 11.1 136.5;

263 1.8 6.00001 -3.00001; 264 1.8 6.00001 -1.5; 265 1.8 6.00001 0;

266 1.8 6.00001 4.50001; 267 1.8 6.00001 6.00001; 268 1.8 6.00001 7.50002;

269 1.8 6.00001 9.00002; 270 1.8 6.00001 13.5; 271 1.8 6.00001 15;

272 1.8 6.00001 16.5; 273 1.8 6.00001 18; 274 1.8 6.00001 22.5;

275 1.8 6.00001 24; 276 1.8 6.00001 25.5001; 277 1.8 6.00001 27.0001;

278 1.8 6.00001 31.5001; 279 1.8 6.00001 33.0001; 280 1.8 6.00001 34.5001;

281 1.8 6.00001 36.0001; 282 1.8 6.00001 40.5001; 283 1.8 6.00001 42.0001;

284 1.8 6.00001 43.5001; 285 1.8 6.00001 45.0001; 286 1.8 6.00001 49.5001;

287 1.8 6.00001 51.0001; 288 1.8 6.00001 52.5001; 289 1.8 6.00001 54.0001;

290 1.8 6.00001 58.5001; 291 1.8 6.00001 60.0001; 292 1.8 6.00001 61.5001;

293 1.8 6.00001 63.0001; 294 1.8 6.00001 67.5001; 295 1.8 6.00001 69.0001;

296 1.8 6.00001 70.5001; 297 1.8 6.00001 72.0002; 298 1.8 6.00001 76.5002;

299 1.8 6.00001 78.0002; 300 1.8 6.00001 79.5002; 301 1.8 6.00001 81.0002;

302 1.8 6.00001 85.5002; 303 1.8 6.00001 87.0002; 304 1.8 6.00001 88.5002;

305 1.8 6.00001 90.0002; 306 1.8 6.00001 94.5002; 307 1.8 6.00001 96.0002;

308 1.8 6.00001 97.5002; 309 1.8 6.00001 99.0002; 310 1.8 6.00001 103.5;

311 1.8 6.00001 105; 312 1.8 6.00001 106.5; 313 1.8 6.00001 108;

314 1.8 6.00001 112.5; 315 1.8 6.00001 114; 316 1.8 6.00001 115.5;

317 1.8 6.00001 117; 318 1.8 6.00001 121.5; 319 1.8 6.00001 123;

320 1.8 6.00001 124.5; 321 1.8 6.00001 126; 322 1.8 6.00001 130.5;

323 1.8 6.00001 132; 324 1.8 6.00001 133.5; 325 1.8 6.00001 135;

326 1.8 6.00001 138; 327 1.8 6.00001 139.5; 328 1.8 11.1 -3.00001;

329 1.8 11.1 -1.5; 330 1.8 11.1 0; 331 1.8 11.1 4.50001; 332 1.8 11.1 6.00001;

333 1.8 11.1 7.50002; 334 1.8 11.1 9.00002; 335 1.8 11.1 13.5; 336 1.8 11.1 15;

337 1.8 11.1 16.5; 338 1.8 11.1 18; 339 1.8 11.1 22.5; 340 1.8 11.1 24;

341 1.8 11.1 25.5001; 342 1.8 11.1 27.0001; 343 1.8 11.1 31.5001;

344 1.8 11.1 33.0001; 345 1.8 11.1 34.5001; 346 1.8 11.1 36.0001;

347 1.8 11.1 40.5001; 348 1.8 11.1 42.0001; 349 1.8 11.1 43.5001;


32/202

350 1.8 11.1 45.0001; 351 1.8 11.1 49.5001; 352 1.8 11.1 51.0001;

353 1.8 11.1 52.5001; 354 1.8 11.1 54.0001; 355 1.8 11.1 58.5001;

356 1.8 11.1 60.0001; 357 1.8 11.1 61.5001; 358 1.8 11.1 63.0001;

359 1.8 11.1 67.5001; 360 1.8 11.1 69.0001; 361 1.8 11.1 70.5001;

362 1.8 11.1 72.0002; 363 1.8 11.1 76.5002; 364 1.8 11.1 78.0002;

365 1.8 11.1 79.5002; 366 1.8 11.1 81.0002; 367 1.8 11.1 85.5002;

368 1.8 11.1 87.0002; 369 1.8 11.1 88.5002; 370 1.8 11.1 90.0002;

371 1.8 11.1 94.5002; 372 1.8 11.1 96.0002; 373 1.8 11.1 97.5002;

374 1.8 11.1 99.0002; 375 1.8 11.1 103.5; 376 1.8 11.1 105; 377 1.8 11.1 106.5;

378 1.8 11.1 108; 379 1.8 11.1 112.5; 380 1.8 11.1 114; 381 1.8 11.1 115.5;

382 1.8 11.1 117; 383 1.8 11.1 121.5; 384 1.8 11.1 123; 385 1.8 11.1 124.5;

386 1.8 11.1 126; 387 1.8 11.1 130.5; 388 1.8 11.1 132; 389 1.8 11.1 133.5;

390 1.8 11.1 135; 391 1.8 11.1 138; 392 1.8 11.1 139.5;

393 3.30001 6.00001 -6.00001; 394 3.30001 6.00001 -4.50001;

395 3.30001 6.00001 -3.00001; 396 3.30001 6.00001 -1.5; 397 3.30001 6.00001 0;

398 3.30001 6.00001 1.5; 399 3.30001 6.00001 3.00001;400 3.30001 6.00001 4.50001; 401 3.30001 6.00001 6.00001;

402 3.30001 6.00001 7.50002; 403 3.30001 6.00001 9.00002;

404 3.30001 6.00001 10.5; 405 3.30001 6.00001 12; 406 3.30001 6.00001 13.5;

407 3.30001 6.00001 15; 408 3.30001 6.00001 16.5; 409 3.30001 6.00001 18;

410 3.30001 6.00001 19.5; 411 3.30001 6.00001 21; 412 3.30001 6.00001 22.5;

413 3.30001 6.00001 24; 414 3.30001 6.00001 25.5001;

415 3.30001 6.00001 27.0001; 416 3.30001 6.00001 28.5001;

417 3.30001 6.00001 30.0001; 418 3.30001 6.00001 31.5001;

419 3.30001 6.00001 33.0001; 420 3.30001 6.00001 34.5001;

421 3.30001 6.00001 36.0001; 422 3.30001 6.00001 37.5001;

423 3.30001 6.00001 39.0001; 424 3.30001 6.00001 40.5001;

425 3.30001 6.00001 42.0001; 426 3.30001 6.00001 43.5001;

427 3.30001 6.00001 45.0001; 428 3.30001 6.00001 46.5001;

429 3.30001 6.00001 48.0001; 430 3.30001 6.00001 49.5001;

431 3.30001 6.00001 51.0001; 432 3.30001 6.00001 52.5001;

433 3.30001 6.00001 54.0001; 434 3.30001 6.00001 55.5001;

435 3.30001 6.00001 57.0001; 436 3.30001 6.00001 58.5001;

437 3.30001 6.00001 60.0001; 438 3.30001 6.00001 61.5001;

439 3.30001 6.00001 63.0001; 440 3.30001 6.00001 64.5001;

441 3.30001 6.00001 66.0001; 442 3.30001 6.00001 67.5001;

443 3.30001 6.00001 69.0001; 444 3.30001 6.00001 70.5001;

445 3.30001 6.00001 72.0002; 446 3.30001 6.00001 73.5002;

447 3.30001 6.00001 75.0002; 448 3.30001 6.00001 76.5002;

449 3.30001 6.00001 78.0002; 450 3.30001 6.00001 79.5002;

451 3.30001 6.00001 81.0002; 452 3.30001 6.00001 82.5002;

453 3.30001 6.00001 84.0002; 454 3.30001 6.00001 85.5002;

455 3.30001 6.00001 87.0002; 456 3.30001 6.00001 88.5002;

457 3.30001 6.00001 90.0002; 458 3.30001 6.00001 91.5002;

459 3.30001 6.00001 93.0002; 460 3.30001 6.00001 94.5002;

461 3.30001 6.00001 96.0002; 462 3.30001 6.00001 97.5002;

463 3.30001 6.00001 99.0002; 464 3.30001 6.00001 100.5;


33/202


34/202

607 4.80001 1.5 18; 608 4.80001 1.5 27.0001; 609 4.80001 1.5 36.0001;

610 4.80001 1.5 45.0001; 611 4.80001 1.5 54.0001; 612 4.80001 1.5 63.0001;

613 4.80001 1.5 72.0002; 614 4.80001 1.5 81.0002; 615 4.80001 1.5 90.0002;

616 4.80001 1.5 99.0002; 617 4.80001 1.5 108; 618 4.80001 1.5 117;

619 4.80001 1.5 126; 620 4.80001 1.5 135; 621 4.80001 6.00001 -6.00001;

622 4.80001 6.00001 -4.50001; 623 4.80001 6.00001 -3.00001;

624 4.80001 6.00001 -1.5; 625 4.80001 6.00001 0; 626 4.80001 6.00001 1.5;

627 4.80001 6.00001 3.00001; 628 4.80001 6.00001 4.50001;

629 4.80001 6.00001 6.00001; 630 4.80001 6.00001 7.50002;

631 4.80001 6.00001 9.00002; 632 4.80001 6.00001 10.5; 633 4.80001 6.00001 12;

634 4.80001 6.00001 13.5; 635 4.80001 6.00001 15; 636 4.80001 6.00001 16.5;

637 4.80001 6.00001 18; 638 4.80001 6.00001 19.5; 639 4.80001 6.00001 21;

640 4.80001 6.00001 22.5; 641 4.80001 6.00001 24; 642 4.80001 6.00001 25.5001;

643 4.80001 6.00001 27.0001; 644 4.80001 6.00001 28.5001;

645 4.80001 6.00001 30.0001; 646 4.80001 6.00001 31.5001;

647 4.80001 6.00001 33.0001; 648 4.80001 6.00001 34.5001;649 4.80001 6.00001 36.0001; 650 4.80001 6.00001 37.5001;

651 4.80001 6.00001 39.0001; 652 4.80001 6.00001 40.5001;

653 4.80001 6.00001 42.0001; 654 4.80001 6.00001 43.5001;

655 4.80001 6.00001 45.0001; 656 4.80001 6.00001 46.5001;

657 4.80001 6.00001 48.0001; 658 4.80001 6.00001 49.5001;

659 4.80001 6.00001 51.0001; 660 4.80001 6.00001 52.5001;

661 4.80001 6.00001 54.0001; 662 4.80001 6.00001 55.5001;

663 4.80001 6.00001 57.0001; 664 4.80001 6.00001 58.5001;

665 4.80001 6.00001 60.0001; 666 4.80001 6.00001 61.5001;

667 4.80001 6.00001 63.0001; 668 4.80001 6.00001 64.5001;

669 4.80001 6.00001 66.0001; 670 4.80001 6.00001 67.5001;

671 4.80001 6.00001 69.0001; 672 4.80001 6.00001 70.5001;

673 4.80001 6.00001 72.0002; 674 4.80001 6.00001 73.5002;

675 4.80001 6.00001 75.0002; 676 4.80001 6.00001 76.5002;

677 4.80001 6.00001 78.0002; 678 4.80001 6.00001 79.5002;

679 4.80001 6.00001 81.0002; 680 4.80001 6.00001 82.5002;

681 4.80001 6.00001 84.0002; 682 4.80001 6.00001 85.5002;

683 4.80001 6.00001 87.0002; 684 4.80001 6.00001 88.5002;

685 4.80001 6.00001 90.0002; 686 4.80001 6.00001 91.5002;

687 4.80001 6.00001 93.0002; 688 4.80001 6.00001 94.5002;

689 4.80001 6.00001 96.0002; 690 4.80001 6.00001 97.5002;

691 4.80001 6.00001 99.0002; 692 4.80001 6.00001 100.5;

693 4.80001 6.00001 102; 694 4.80001 6.00001 103.5; 695 4.80001 6.00001 105;

696 4.80001 6.00001 106.5; 697 4.80001 6.00001 108; 698 4.80001 6.00001 109.5;

699 4.80001 6.00001 111; 700 4.80001 6.00001 112.5; 701 4.80001 6.00001 114;

702 4.80001 6.00001 115.5; 703 4.80001 6.00001 117; 704 4.80001 6.00001 118.5;

705 4.80001 6.00001 120; 706 4.80001 6.00001 121.5; 707 4.80001 6.00001 123;

708 4.80001 6.00001 124.5; 709 4.80001 6.00001 126; 710 4.80001 6.00001 127.5;

711 4.80001 6.00001 129; 712 4.80001 6.00001 130.5; 713 4.80001 6.00001 132;

714 4.80001 6.00001 133.5; 715 4.80001 6.00001 135; 716 4.80001 6.00001 136.5;

717 4.80001 6.00001 138; 718 4.80001 6.00001 139.5; 719 4.80001 11.1 -6.00001;


35/202

720 4.80001 11.1 0; 721 4.80001 11.1 9.00002; 722 4.80001 11.1 18;

723 4.80001 11.1 27.0001; 724 4.80001 11.1 36.0001; 725 4.80001 11.1 45.0001;

726 4.80001 11.1 54.0001; 727 4.80001 11.1 63.0001; 728 4.80001 11.1 72.0002;

729 4.80001 11.1 81.0002; 730 4.80001 11.1 90.0002; 731 4.80001 11.1 99.0002;

732 4.80001 11.1 108; 733 4.80001 11.1 117; 734 4.80001 11.1 126;

735 4.80001 11.1 135; 736 4.80001 11.1 139.5; 737 4.

Date post:	01-Jun-2018
Category:	Documents
Upload:	ilmtalab
View:	257 times
Download:	1 times

Car Parking Report

Documents