Date post: | 25-Dec-2015 |
Category: |
Documents |
Upload: | monica-owen |
View: | 218 times |
Download: | 1 times |
Career and Technical Education in the Great Falls Public Schools
Your Logo Here
An overview
Career and Technical Education courses provide academic and technical knowledge and skills to prepare for further education and careers in current or emerging employment sectors. These programs focus on career preparation, resource management, communication, technical skill development, applied academics, technological literacy, personal skills and leadership. One credit is required by the Montana Office of Public Instruction for graduation
There are some 45 high school and middle school teachers teaching 50 courses these four general disciplines:
Health Science (Med Prep) Industrial Technology Business Family and Consumer Sciences
The need
Cascade County is at over 7 percent unemployment rate. This has increased from 2.2 percent four years ago. Full employment is 4 percent.
There are critical shortages of workers in the skilled trades (carpenters, plumbers, welders, electricians), hospitality workers, and health care workers
Many of these jobs pay better than those requiring a college degree
Who’s enrolled
A credit of career and technical education is a graduation requirement.
More than half of all Great Falls public school students are enrolled in a CTE (hands-on, practical) class at any time.
By the program
Industrial technology Health professions Family and consumer science Business Agriculture
Special events
Career fairs
Health Careers Fair
Construction Trades Fair
Trades Fair and Rodeo Feb. 8,9, 2012
High school houses
Two houses are under construction by Great Falls High and CMR students in conjunction with NeighborWorks
Interior Design class students help plan furnishings, and a landscape class at CMR helps with outside design.
Business enterprises DECA (Distributive Education Clubs of America) stores for
students at CMR and GFHS
■ Great Falls High School shop students sell storage units they build in class.
■ CMR Woodshop class makes and sells swings and beds. ■ North Middle School shop classes run a laser engraver
business.
Paris Gibson Education Center businesses
A number of businesses at Paris Gibson Education Center: “Sew What” (formerly Avant Gear), “The Company” that runs a school café and catering business, “Lynx Grafix” that does T-shirt and mug design, and “Paris Gibson Designs,” that does business cards, calendars, photos and even Web pages.
“The Company” coffee shop and catering business at Paris Gibson Education Center
Making a quilt for the Paris Gibson Education Center “Sew What” sewing business.
Meeting new needs A wind generator was erected in November 2008 at CMR and solar panels
at GFHS in spring 2010 anticipating the boom in alternative power source jobs.
The Auto Tech Center opened in Fall 06 at Paris Gibson School to train technicians. Partnership with five auto dealerships that put up $15,000 each to fund center: Bison, Bennett, City, Taylor Brothers, and Lithia.
All business ed classes operate on a “Company” model
Wind generator goes up at CMR in Fall 2008Instruction at Paris Gibson Education Center ASE Auto Tech Center.
Dress up day at Rustler Inc business ed class based on “Company” model
Beyond the classroom
There are more than 689 juniors in the Job Shadowing program that offers 325 shadows.
Many students earn credits by taking Work Experience courses and working part-time and a new internship program is rapidly growing.
11-12 Plans Expanding WorkKeys to CMR, adding a fourth component, Career Skills (soft skills) testing,
and working with local businesses to add value to the certificate Work with the district assessment office to systematize WorkKeys results and testing Bolstering ASE and Ag programs Working toward furtherance of the Career Academy concept with beginning of Med Prep
“pocket” academy at CMR Establishing an FCCLA CTSO at CMR Combining the Apprenticeship Rodeo and Trades Fair into one event in February Perfecting the Big Sky Pathways, MCIS and POS in conjunction with COT Pathways
advisers Work to better promote our CTE programs, possibly having an open house in February
during CTE Month Migrate the GFHS Early Childhood day care pilot to the ELF center at Skyline Bolster CTSOs so that as many students as possible participate in state, regional and
national events Be actively involved in FCS and IT curriculum development Work towards further efficiencies in IT department such as was accomplished this past year
Beyond the district
Students are enrolled in dual credit courses at MSU-Great Falls College of Technology in welding and EMT (first responders) basic.
Med Prep students train at Benefis with nurses to qualify as Certified Nursing Assistants.
Little known facts
■ Enrollment is high. Approximately half of the high school graduates are Vocational Concentrators by taking three CTE credits or more before they graduate.
Post-secondary credit which saves time and money for students is available Dual Enrollment opportunities.
Work Experience allows students to receive credit while working for wages on a job.
Career and Technical Education has strong partnerships with the local business community and uses Advisory Boards for five content areas.
Additional funding comes from a state allocation and from a Carl Perkins federal grant.
Student organizations
Career and Technical Organizations: Business Professionals of America (BPA), Association of Marketing Students (DECA), Health Occupations Students of America (HOSA) Industrial Technology Students (SKILLS USA/VICA) FCCLA FFA These organizations enhance education with a co-curricular option that
motivates students through competitive events with an emphasis on leadership, citizenship and specific skills.GFPS also requires all Middle School students to take a quarter (each year) in Industrial Technology and Family and Consumer Science. These courses familiarize students with woods, technology, home maintenance, textiles, foods and personal/family issues. These curricula provide an introduction to the high school courses.
North Middle School “Company” that uses a laser engraver to learn technology and computer skills as well as how to operate a company and turn a profit.
Other facts:
Field trips include local eateries to find out how they cater to clients Career classes include: Hospitality, Tourism and Recreation class, entrepreneurship
class, consumer mechanics class, applied physics class, and landscape design class.
The future
We’re constantly looking for new ideas For example we’re studying a pre-engineering program that reaches into the
Middle Schools to meet a national need for engineers Ready to work certification More partnerships with the community Volunteerism through AmeriCorps for high school house students
Graduates of the Fall 2008 CNA class from CMR. The number of CNA classes has grown from one to three in the past year to meet demand.
How you can help
Volunteer to be a Career Presenter at Career Fairs Volunteer to be a job shadow mentor We’re looking for sponsors for various events and programs.
An example is the Auto Tech Center that is still looking for sponsorship for its work bays
Talk up Career and Technical Education
Veterinarian Kelly Manzer volunteered her time to present to the 8th Grade Career Fair in 2006.
Contact
Tom Kotynski
Workforce Development Facilitator Great Falls Public Schools 268 6024 [email protected] and Technical Education Web page:gfps.k12.mt.us/Departments/CareerTechEd/CareerTechEd.html