Date post: | 21-Aug-2015 |
Category: |
Business |
Upload: | datacenters |
View: | 1,932 times |
Download: | 1 times |
CARMEN E. TURNER MAINTENANCE AND TRAINING FACILITY2009 State of Good Repair
July 8, 2009
2
History
• Since acquiring the existing facility assets from four private bus service providers in the mid 1970’s to form Metrobus, the maintenance and training facilities proved to be either inadequate or nonexistent.
• In 2000, the opportunity to acquire this 725,524 s.f. facility provided the opportunity to provide consolidated backshop maintenance and training for both Bus and Rail.
• The ability to provide focused hands-on training directly affects the ability to perform necessary preventive maintenance by highly skilled personnel to maintain equipment to ensure maximum service life and maintain a state of good repair.
• The backshops provide the in-house capability to perform mid-life rehabilitation and replacement of components to ensure full life cycle utilization and contribute to maintaining a state of good repair.
ENSV
ENGINEERING SSRVICES
Bus Paint & Body ShopBLDG F
Bus Machine ShopBLDG E
Data Center
BLDG D
Rail OCC
Training BLDG BPlant Maintenance Elevator/Escalator
Storerooms and ShopsBLDG A
ELE
BusMaintenance
PlantMaintenance
ENSV
ENGINEERING SERVICES
CTF Layout
BLDG C
3
4
Building A
• Plant Maintenance Shops and Offices: Graphics, Sheet Metal, Machine, Portable Lift Repair, Plumbing, Carpentry, Locksmith, Welding, Silk Screen
• Warehouse Space: Plant Maintenance and Elevators and Escalators
ENSV
ENGINEERING SERVICES
Sheet Metal ShopGraphics Shop
5
Building AENSV
ENGINEERING SERVICES
Carpentry Shop
Machine Shop
Portable Lift Shop
Locksmith Plumbing Shop
6
Building B
• 1st Floor:– Classrooms and Training Facilities for BUS, RAIL, and Plant Maintenance– Storage BUS, Power, and Train Control– Cardoza TransTech Academy – Security Operations Center
• 2nd Floor: – Audio-Visual Lab– Farecard and Faregate Training– Elevator & Escalator Operations Center– RAIL and Bus Training Facilities
ENSV
ENGINEERING SERVICES
Bus Simulator Lab Technical Skills Shop
7
Building BENSV
ENGINEERING SERVICES
Audio-Visual Lab
Farecard and Gate Training
Elevator and EscalatorOperations Center
Transit Police SecurityOps Center
Computer Equipped Classroom
8
Building C
• 1st Floor:– Offices for Engineering, Human Resources, Information Technology, Rail, and Safety– Cafeteria
• 2nd Floor: – Offices for Plant and Bus Maintenance– Future Bus Operations Control Center– Data Center
ENSV
ENGINEERING SERVICES
Future Bus OperationsControl Center
Data Center
9
Building D• 1st Floor:
– New Rail Operations Control Center– New DATA Center– Offices, Training Rooms
• 2nd Floor– New Command Center– New Offices for Rail Operations Control
and Transit Police– New Communications Room
ENSV
ENGINEERING SERVICES
Rail Operations Control CenterView From Right With CommandCenter Above
Rail Operations Control Center View From Controller’s Console
10
Building DENSV
ENGINEERING SERVICES
CommandCenter
Communications Room
Elevator/Escalator Lab
11
Building E • Bus Heavy Overhaul Shop: Steam Room, Radiator Shop, Machine Shop, Bus
Graphics, Engine and Transmission Shop, Welding, Fare Box, Transmission Dynamometer, Engine Dynamomener
ENSV
ENGINEERING SERVICES
Engine & Transmission Machine Shop
Engine Dynamometer
Fare Box Room
Radiator Shop
12
Building F
• Open Storage (Future Bus Paint and Body Shop)• Safety EMT Training Tunnel, ROW Training and Rollover Car
ENSV
ENGINEERING SERVICES
Right-of-WayTraining Tracks
Emergency ResponseTraining Tunnel
Rollover Train
Rail Car Training
13
Future Plans
• Permanent ROCC in Building D
• Permanent BOCC in Building C
• Bus II CNG Paint and Body Shop in Building F
ENSV
ENGINEERING SERVICES