Shiftworks® products are made in the USA

Caroline says“Call my daddy”(702) 895-6812

2 www.shiftworks.com

NEW PRODUCTS

1970-1972 Chevelle SS & Monte Carlo

S511-W & S514-1W ready for installation

Gauges Conversion for Idiot Light dashes only. This is a very simple conversion using existing dash components and NOT requiring the purchase of a new circuit board.

Includes ELECTRIC Oil Pressure Gauge and sending unit, Voltmeter, and Temperature Gauge also with sending unit. A Tachometer replacing the Clock or Blank is also offered.

1970 Gauges S511-G $265.001970 Tachometer S514-1G $165.001971-72 Gauges S511-W $265.001971-72 Tachometer S514-1W $165.00

S511-W

www.shiftworks.com 3

NEW PRODUCTS

Light Up Your Dash!

Incandescent Bulbs OEM

New LED Bulbs

Back-Up Lights

LED101 = 1895/57 LED1002 = #168

LED101 Dash Lights #1895/57 8-pack $24.00

LED102 Dash Lights #168 8-pack $24.00

LED103 Back-Up Lights #1156 2-pack $18.00

LED104 Park/Turn Signal #1157 2-pack $18.00

www.shiftworks.com4

NEW PRODUCTS

1967 Camaro ShifterAlso 67 Firebird and 68-72 Novas

Our New shifter is designed to work with the TH350/400 and all OverDrive transmissions. It fits and looks like the original, but with modern adaptability. Includes NSS installed.

SW280-RCT $350.00

1963 Impala & 1963-64 Nova ShifterOur New shifter is designed to work with the TH350/400 and all OverDrive

transmissions. Our shifter mounts to the floor and enables the continued use of the factory console when swapping for a modern transmission.

SW230-R22 $295.00

www.shiftworks.com 5

1964-67 Chevelle, Impala & 1965-67 Nova Shifter

Our shifter handle looks very close to the original, even using original replacement black buttons for the T-Handle. Our cable systems include all hardware needed for installation

including a fully functioning NSS, mounting hardware, 30 inch shift cable, and even a new slider pre-cut like the factory did to fit the T-Handle.

Shifters designed to work with TH350, TH400, TH700-R4, TH200-4R and 4L60.

1964-67 Chevelle SW280-CT7C $350.00

SW280-CT7C

1964-67 Impala SW280-CT7N $350.001965-67 Nova SW280-CT7N $350.00

SW280-CT7N

NEW PRODUCTS

www.shiftworks.com6

NEW PRODUCTS

Neutral Safety & Back-up Switch Re-Location Conversion 3-speed and 4-speed Automatics1969-81 Pontiacs and 1973-81 Chevys

Does your shifter look like this? GM used a rod linkage from the transmission to operate the neutral safety and back-up switch located on the column for many of its center console equipped cars. Headers and OverDrives and many owners have in many cases lost or caused to be lost this valuable safety item. We know, we got the calls.

So finally here is a solution. You can now put it on the shifter where it belongs.

For all TH350 and TH400 Use Standard Motor Products NS7#SW652 $49.50 Switch not included.

For all OverDrive applications using SHIFTWORKS® shifter conversion #SW653 $94.50 Switch IS included.

www.shiftworks.com 7

1968-72 CamaRO & ChEvEllE

1968-72 Camaro & Chevelle 4L80 Specific Conversions

The 4L80 uses a variety of Range Select Shafts. A long shaft used in trucks for the factory neutral safety switch and shorter shafts, some like the TH400 and some clocked differently.

SC2252 1968-70 Chevelle $99.50 SC2253 1971-72 Chevelle $99.50SC2254 1968-69 Camaro $99.50SC2255 1970-72 Camaro $99.50

6L80

SC2612 1968-70 Chevelle $99.50

SC2613 1971-72 Chevelle $99.50

SC2614 1968-69 Camaro $99.50

SC2615 1970-72 Camaro $99.50

K100-30 30 inch cable (Stock) $74.50

K100-32 32-inch cable $79.50

6L80 Shifters and conversion kits for other GM shifters available

Contact Shiftworks for more information

www.shiftworks.com8

1964-67 ChEvEllE

#S500#S704-BS

#SC2031-CAs Installed

#SC2042-CAs Installed

Powerglide Shifter Conversion KitThe purpose of this kit is to allow the use of the 1964-67 factory installed console shifter when the Powerglide

transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive

(TH700-R4, 4L60 or TH200-4R) transmission.

This kit eliminates the rod linkage and replaces it with our cable #K100. Kit includes cable.

1964-65 ChEvELLE#SC2031-C TH350, TH400 $175.00#SC2041-C TH700-R4, TH200-4R, or 4L60 $175.00

1966-67 ChEvELLE#SC2032-C TH350, TH400 $175.00#SC2042-C TH700-R4, TH200-4R, or 4L60 $175.00

1964-67 ChEvELLE#S500* 1965-67 Backup and Safety Switch $52.50*Recommended for all conversions.

#S704-BS 1966-67 Console Light Bucket and Shield $24.50

#4160 Button $15.00#S501 Button Spring $4.50#S530 TH350 Kickdown Cable $20.00#S531 TH350 Kickdown Bracket (Small Block) $14.50

1964-67 PowERgLIDE PARtS#SW421 Rod Linkage $41.00#SW419 Trans. Select Lever $42.00

www.shiftworks.com 9

1964 ImPala

Powerglide Shifter Conversion KitThe purpose of this kit is to allow the use of the 1964 factory installed console shifter when the Powerglide transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60 or TH200-4R) transmission. This kit eliminates the rod linkage and replaces it with our cable #K100. Kit includes cable.

1964 ImPALA#SC2051-C TH350, TH400 $175.00#SC2061-C TH700-R4, TH200-4R, or 4L60 $175.00

#S500* Back-Up & Safety Switch $52.50*Recommended for all conversions.

#S530 TH350 Kickdown Cable $20.00#S531 Kickdown Bracket (Small Block) $14.50#4160 Button $15.00#S501 Button Spring $4.50

#S530 #S531

#SC2051-C

#SC2061-C

#S501

#S500

#4160

www.shiftworks.com10

1965-67 NOva & ImPala 1967 CamaRO & FIREbIRD, 1968-72 NOva

Powerglide Shifter Conversion KitUse your factory-installed console shifter when the Powerglide transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200 4R, or 4L60) transmission. This kit retains the rod linkage.

Rod Linkage#SW423 65-67 Impala PG TH350 & O.D. $45.00#SW425 65-67 Impala TH400 $58.00#SW427 65-67 Nova $42.00#SW431 65-67 Nova (O.D.) $42.00#SW404 Swivel Kit $12.50

#S1042

#2441 #2592

#SW425 pictured

As Installed

#S1031 As Installed

1965-67 NovA#S1031 TH350, TH400 $59.50#S1041 TH700-R4, TH200-4R, or 4L60 $59.50#4160 Shifter Release Button $15.00#S501 Release/Spring Button $4.50

1965 ImPALA#S103 TH350, TH400 $48.50#2441 3-Speed Lens $60.50#S1043 TH700-R4, TH200-4R, or 4L60 $59.50

1966-67 ImPALA#S103 TH350, TH400 $48.50#2592 3-Speed Lens $48.50#S1042 TH700-R4, TH200-4R, or 4L60 $59.50

1965-67 NEUtRAL SAfEtY AND BACk-UP SwItCh#S500* $52.50*Recommended for all conversions.

www.shiftworks.com 11

1965-67 NOva & ImPala 1967 CamaRO & FIREbIRD, 1968-72 NOva

Shifter Parts

#SW429 67 Rod Linkage with swivel $42.00#SW404 Swivel Kit $12.50#S530 TH350 Kickdown Cable $20.00#S531 Kickdown Bracket (Small Block) $14.50#6724 Shifter Release Button $15.00#S501 Release Button Spring $4.50#S504 Plastic (Delrin) Bushings $17.50#S636 Flexi-Rod (inside handle) $54.50#S635 NSS & Back-up Light Lever OE $15.25#SW442 Bottom Spring $4.50#SW443 Bottom Spring (cotter pin style) $4.50#SW441 Main Shaft Washers $6.50#SW435 1968-72 Nova TH Rod Linkage $63.50#S522-D Neutral Safety/Back-up Switch $52.50

#S105-D

#S635

#S504

#S636

#S522-D #SW435

Shifter Conversion KitModify your factory shifter to function correctly when replaced with a 3-speed (TH350 or TH400) or 4-speed (TH700-R4 or TH200-4R) transmission. Includes new detent, neutral safety/backup switch, all rod linkage parts, new bushings and rotating shaft.

#S105-DA TH350 & TH400 $175.00#S105-DB OverDrives $175.00

www.shiftworks.com12

1968-72 ChEvEllE, CamaRO, ImPala & mONTE CaRlO

3-Speed InstallationsAll 1968-72 factory “Horseshoe” style shifters have a universal detent for both 2-speed and 3-speed automatic transmissions. They also use the same cable. However, these models do require a cable

installation kit when swapping out a Powerglide transmission for a TH350 or TH400, or when

installing a factory console shifter in car originally equipped as a column shift.

#C351

#C401

#C3511

See Cables

1968-72 CAmARo, ChEvELLE, ImPALA, & moNtE CARLoUniversal Kit (All Models)#C351 TH350, TH400 $37.50#S640 3-Speed Detent $30.00

1968-69 CAmARo#C401 TH400 GM Factory Parts $45.00#C354 TH350 $42.50

1968-72 ChEvELLE, 1970-72 CAmARo, 1968-72 ImPALA#C3511 TH350, TH400 $42.50#C402 TH400 GM Factory Parts $45.00#4582 1968-70 3-speed Lens $20.50#4584 1971-72 3-speed Lens $20.50#S530 TH350 Kickdown Cable $20.00#S531 TH350 Kickdown Bracket $14.50 (Small Block)

3-Speed Ratchet Shift DetentA new Thompson Performance product. This detent will enable positive shifts from low to drive. #DT3 Powerglide, TH350, TH400 $90.00#DT3-RMVB* $100.00#S150 68-69 Camaro RVB Lens $19.50#S151 68-70 Chevelle RVB Lens $19.50#S152 71-72 Chevelle RVB Lens $19.50

* Reverse Manual Valve Body P R N 1 2 3

#DT3

www.shiftworks.com 13

4-Speed Overdrive Kit

#SC2244

#DT4

#SC2243

#C100

#K100

68-69 70-72As Installed – Camaro

RVB Lens#S151

4-Speed Ratchet Shift DetentA new Thomson Performance product. This detent will enable positive shifts from low to drive.#DT4* GM Overdrives $90.00#DT4-RMVB $100.00

*DT4 MUST be used with a SHIFTWORKS® overdrive conversion kit series SC224X.

CABLES#K100 Shifter Cable $74.50

#C100 Shifter Cable (GM #3956765) $97.75

#S532 Retainer $5.50 (clips cable to shifter handle)

1968-69 CAmARo#SC2244 TH700-R4,

TH200-4R, 4L60 $92.50

1970-72 CAmARo#SC2245 TH700-R4,

TH200-4R, 4L60 $92.50

1968-72 ImPALA (No Lens)#SC2240 TH700-R4,

TH200-4R, 4L60 $81.25

1968 ChEvELLE#SC2241 TH700-R4,

TH200-4R, 4L60 $92.50

1969-70 ChEvELLE#SC2242 TH700-R4,

TH200-4R, 4L60 $92.50

1971-72 ChEvELLE#SC2243 TH700-R4,

TH200-4R, 4L60 $92.50

See our video on cables:www.shiftworks.com/video/cable.htm

1968-72 ChEvEllE, CamaRO, ImPala & mONTE CaRlO

www.shiftworks.com14

1968-81 FIREbIRD, GTO, & lE maNS, 1973-81 CamaRO

4-Speed Overdrive KitThe purpose of this kit is to allow the use of the factory installed shifter when installing a newer overdrive transmission. The kit includes a new laser cut and hardened detent, and all zhardware and brackets are included.

3-Speed Installations The 1968-69 Firebird Powerglide (2-speed) shifter can be used with the TH350 or TH400 (3-speed) transmission without modification. The only difference in the factory shifter detent is an additional hard stop for 2nd gear, not present with the 2-speed detent. This stop is unnecessary.

#C3521 1968-69 Firebird TH350 $37.75#C3531 1968-69 Firebird TH400 $37.75#K100 Shifter Cable $74.50#SW652 NSS Relocation Kit $49.50

#C352

As Installed

#SC2262

1973-78 CAmARo#SC2261 TH700-R4, TH200-4R, or 4L60 $92.50

1979-81 CAmARo, 1968-81 fIREBIRD, 1968-75 gto & LE mANS#SC2262 TH700-R4, TH200-4R, or 4L60 $92.50#SW653 NSS Relocation Kit $94.50

#K100 Shifter Cable $74.50

As Installed73-78 Camaro

Note: See page 7 for Neutral Safety/Backup Switch

Note: See page 7 for Neutral Safety/Backup Switch

1968-69 FIREbIRD & GTO

www.shiftworks.com 15

Shifter Conversion KitThe purpose of this kit is to allow the use of the factory installed automatic shifter when the transmission is replaced with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, 4L60, or TH200-4R) transmission. The kit retains the rod linkage.

#SC2405 1965-67 $97.25

A new laser cut, die stamped aluminum console insert with black anodized letters for the above kit.

#S141 Console Insert (TH350/400) $44.50#S142 Console Insert (Overdrive) $44.50

#SC2405#S141 #S142

Shifter Conversion KitThis kit enables the use of the factory installed shifter when installing a newer overdrive transmission, such as the TH200-4R, TH700-R4, and the 4L60. The kit includes a new laser cut and hardened detent, and all hardware and brackets are included to allow use of the original

cable. Also included is an overdrive console lens adapter.

#SC2401 1968-71 $97.25 #SC2402 1972-76 $97.25 #SC2403 1977-81 $97.25

Cables #K102-29 1968-82 $94.50 #K102-30 1984-96 $94.50Lens Indicator Adapters

L to R: 68-71, 72-76, 77-81

1968-81 CORvETTE

Note: New shifters available. See page 22.

1965-67 CORvETTE

www.shiftworks.com16

1968-72 bUICK

TH

4-Speed Overdrive KitUse your factory-installed automatic floor shifter with a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission. The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, cable pan bracket, console lens indicator (68-69 only), new cable, all necessary hardware, and instructions.

1968-72 BUICk#SC2072 TH700-R4, TH200-4R, or 4L60 $175.00

4-Speed Overdrive KitUse your factory-installed automatic floor shifter with a newer 3-speed (TH350, TH400) or 4-speed (TH700-R-4, TH200-4R or 4L60) transmission. The conversion includes a new laser cut and hardened detent for proper stops and gear selection, a new matching transmission shift lever, cable pan bracket, new cable, all necessary hardware, and instructions.#SC2082 TH350, TH400 $175.00#SC2092 TH200-4R, TH700-R4 or 4L60 $175.00

1964-66 bUICK

#SC2082 #SC2092

#SC2072

As Installed(’68-’69)

OD

www.shiftworks.com 17

1964-65 GTO & lE maNS

#SC2152

As Installed

#SC2101-C

This kit allows the use of the factory 2-speed shifter when converting to a fully functional

3-speed shifter with installation of a new TH350, TH400, TH200-4R, TH700-R4, or 4L60 transmission. Kits include our cable #K100.

#SC2101-C TH350 & TH400 $175.00

#SC2121-C TH700-R4, TH200-4R, or 4L60 $175.00

1966-67 GTO & lE maNS

Use your factory-installed 2-speed shifter to retain the original appearance when replacing the Powerglide transmission with a newer 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200-4R, or 4L60) transmission. This kit eliminates the rod linkage and replaces it with a cable. Kits include new cable.

#SC2152 TH350 & TH400 $175.00#SC2162 TH700-R4, TH200-4R or 4L60 $175.00

www.shiftworks.com18

DUal GaTE ShIFTERS

#C371

Use the original His & Hers Shifter with a new 3-speed (TH350 or TH400) or 4-speed overdrive (TH700-R4, TH200-4R, or 4L60) transmission. Kits include all necessary hardware for installation.

1967-68 GTO#C362 TH400 $37.50#C363 TH350 $37.50#C361 TH700-R4, TH200-4R, or 4L60 $45.00#K100 Shifter Cable $74.50

#C361

442

The overdrive conversion puts overdrive in a neutral position. Low, second, and drive are normally located.

1970-72 442#C371 TH700-R4, TH200-R4, or 4L60 $125.00 (includes cable)#S656-03 Overdrive Indicator $19.50

#S656-03

www.shiftworks.com 19

1967-72 CUTlaSS

Shifter Conversion KitUse your factory-installed automatic floor shifter with a newer 3-speed (TH350 or TH400) or a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission.

#SC2312

#SC2322

#SC2302

Shifter Conversion KitThe purpose of this kit is to allow the use of the factory shifter and console when the

2-speed transmission is replaced with a TH350 or TH400 3-speed or

a newer 4-speed (TH700-R4, TH200-4R, or 4L60) transmission. This kit eliminates the Rod Linkage and replaces it with a cable .

1965-66 CUtLASS#SC2320 TH350 & TH400 $150.00#SC2322 TH700-R4, TH200-HR or 4L60 $150.00

#SC2381-B Black Knob Fix-It Kit $75.00#SC2381-W White Knob Fix-It Kit $75.00

1964-66 CUTlaSS

1967-69 CUtLASS#SC2302 TH350 & TH400 $150.00

1967-72 CUtLASS#SC2312 TH700-R4, TH200-4R, or 4L60 $150.00

Replace your broken T-Handle with our black or white smoothie knob - works great!

www.shiftworks.com20

1973-77 CUTlaSS

4l60E, 4l65E, 4l70E & 4l80E

This is a new SHIFTWORKS® conversion for the factory 1973-77 Olds console shifter. This kit can be used with the TH200-4R, 700-R4 and 4L60 series transmissions.

The kit includes a SHIFTWORKS® 30-inch cable, a new shift detent, pan bracket, range select lever and overdrive indicator label. All necessary hardware is also included.

OverDrive Conversion

TH700-R4, TH200-4R or 4L60#SC2352 $175.00

Our 4LX fix-it kits resolve rod linkage conflicts with the electric neutral safety/backup light switch located on the exterior of the transmission and, for cable applications, straighten out the cable alignment if the transmission has the long Range-Select lever.

4LE Rod Linkage fix it $18.504LE-C Cable fix-it kit $18.50Use with the non-E overdrive conversion for your car.

602-P Cable Clocking Fix $12.50

4LE Rod Linkage fix-it 4LE-C Cable fix-it kit

www.shiftworks.com 21

POWERGlIDE

PG Rod Lever PowerGlide Cable Linkage

PowerGlide ShifterAll Trans-Stormer Shifters can now be ordered for the PowerGlide. Simply add a P to the part number prefix. For example, the SW230-R22 becomes a SW230P-R22. Price is the same. However, some PowerGlide transmissions may require an additional Range Selector Shaft and Lever available separately. Both cable and rod linkage versions available.

PowerGlide Range Select & Kickdown Shaft

The Powerglide transmission uses several different range (gear) select shafts. Most are specific to the application and because the levers are usually welded onto the shaft, not easily changed.

We have now replicated the 68 and up shaft design, including the kickdown shaft which is unique among aftermartket suppliers.

As Installed

649-120 649-161 649-1500

#649-120 Range Select and Kickdown Shafts $125.00

#649-161 Rod Linkage Lever $19.50

#649-1500 Cable Linkage $19.50

www.shiftworks.com22

COlUmN ShIFT CONvERSIONS

#KK02

Transmission Shift Arm Connection KitFor column shifters TH350, TH400, TH200-4R, TH700-R4, 4L60, 4L80.

The Kugel Komponents Kit connects the column or floor shifter to most GM transmissions. It also allows for gear pointer alignment. A splined adapter button allows the arm to be positioned at any angle. A slot positions to pivot joint for longer or shorter sweep and pointer alignment.

The rod assembly is 17” – 23 1/2” pivot to pivot.

#KK02 Column Shift Linkage $49.50

Do you have a: 4L60E, 4L70E, or 4L80E with the neutral safety switch on the outside?

Then you may need our 4LE Fix it kit. This allows you to connect the linkage and not have any conflicts with the switch.

#4LE Kit $18.50

#4LE KIT

www.shiftworks.com 23

COlUmN ShIFT CONvERSIONS

#S138 & S139

#S143 & S144

Column Lens Indicators 1962-65 NovA, 1961-64 ImPALA,1964-65 ChEvELLE & gto/tEmPESt#S138 Indicator (TH) $19.50#S139 Indicator (OD) $19.50

1967 NovA & 1967-68 CAmARo#S143 Indicator (TH) $19.50#S144 Indicator (OD) $19.50

#S154

#S153

#S153 AS INSTALLED

1970-1972 mALIBU SwEEP DASh#S157 Indicator OD 4-speed $19.50

#S158 66-67 Chevelle Indicator

1968 & 1969 ChEvELLE

These cleverly designed adaptors fit over the existing raised letter indicators for a permanent and factory appearing solution at an affordable cost.

#S145 68 Chevelle TH 3-speed $19.50#S146 68 Chevelle OD 4-speed $19.50#S147 69 Chevelle TH 3-speed $19.50#S148 69 Chevelle OD 4-speed $19.50

#S146 AS INSTALLED

1968-74 NovA#S155 Indicator TH $19.50#S156 Indicator OD $19.50

#S156

#S155

1966 NovA#S153 Indicator TH $19.50#S154 Indicator OD $19.50

1966-67 ChEvELLE#S158 Indicator OD 4-speed $19.50

(use with clear floor shift lens)

www.shiftworks.com24

1966-67 ChEvEllE & NOva SS GaUGE CONvERSIONS

HIGH OIL PRESSURE?Midrange for the HOP series is 60 pounds, versus the normal 30 pounds oil pressure gauge. The upper scale of the HOP series oil pressure gauge is 100+ pounds.#S505-HOP $225.00#S505-VHOP $225.00#S507-HOP $225.00

Super Sport Gauge ConversionThis new SHIFTWORKS® conversion kit will allow anyone with the standard Chevelle or Nova in-dash gauges to convert to the Super Sport style gauge package.

These gauges are designed to fit into the EXISTING openings in the back of the dash. They include the Temperature sensing device and the mechanical Oil Pressure line and fittings. An ammeter is standard, as was used by GM.

1966-67 ChEvELLE#S505 SS Gauges Kit with Ammeter $225.00#S505-V SS Gauges Kit with Voltmeter $225.00#S505-ADP Adaptors For Shiftworks® Gauges In Factory SS Dash $25.00

1966-67 NovA#S507-V SS Gauges Kit with Voltmeter $225.00

#S507-V

#S505

Use the voltmeter with one-wire alternators and non-GM wiring.

www.shiftworks.com 25

In-Dash TachometerSHIFTWORKS® is now offering In-Dash Tachometer conversions. Replaces the clock with a 7000 RPM TACH. This is a Two-For. Get rid of that “Tachy” steering column appendage AND that broken clock.

All SHIFTWORKS® In-Dash Tachs are engineered to fit into EXISTING dash openings and are designed with a factory look.

1964-65 ChEvELLE#S510-1 1964-65 Chevelle In-Dash Tachometer $165.00

1968 ChEvELLE#S512 1968 Chevelle In-Dash Tachometer $165.00

1968 ChEvELLE IN-DASh tAChomEtER AND gAUgES#S508-VT Gauges Conversion with Tachometer Replaces Idiot Lights $355.00

#S510-1 Installed

#S512 Installed

#S512

Before After

#S510-1

NOva IN-DaSh TaChOmETER CONvERSIONS

www.shiftworks.com26

In-Dash TachometerSHIFTWORKS® is now offering In-Dash Tachometer conversions. Replaces the clock with a 7000 RPM TACH. This is a Two-For. Get rid of that “Tachy” steering column appendage AND that broken clock.

All SHIFTWORKS® In-Dash Tachs are engineered to fit into EXISTING dash openings and are designed with a factory look.

1969 ChEvELLE#S513 1969 Chevelle In-Dash Tachometer $145.00

1970-72 ChEvELLE SS#S514-1G 1970 Chevelle In-Dash Tachometer $165.00#S514-1W 1971-72 Chevelle In-Dash Tachometer $165.00

1970-72 ChEvELLE mALIBU#S518-G 1970 Malibu In-Dash Tachometer $145.00#S518-W 1971-72 Malibu In-Dash Tachometer $145.00

#S513

#S518-G

#S514-W

#S518 Installed

#S513 Installed

#S514 Installed

ChEvEllE IN-DaSh TaChOmETER CONvERSIONS

www.shiftworks.com

1963-65 Nova#S515 1963-65 Nova In-Dash Tachometer $165.00

1968-72 Nova#S517-G 1968-70 Nova In-Dash Tachometer $145.00#S517-W 1971-72 Nova In-Dash Tachometer $145.00

#S515

#S517

#S515 Installed

#S517 Installed

NOva IN-DaSh TaChOmETER CONvERSIONS

27

Shift

wor

ks®

4005

Wes

t Ren

o Av

e.U

nit E

La

s Ve

gas,

NV

8911

8(7

02)

895-

6812

IN-D

ASH

GAUG

E CO

NVER

SION

S