54
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE. FOR LATEST PRICES AND TECHNICAL INFORMATION, PLEASE GO TO OUR WEBSITE AT: www.carpenterandpaterson.com
| Date post: | 13-Apr-2015 |
| Category: |
Documents |
| Upload: | sargunam-sankaravadivel |
| View: | 103 times |
| Download: | 5 times |
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.FOR LATEST PRICES AND TECHNICAL INFORMATION,PLEASE GO TO OUR WEBSITE AT:
www.carpenterandpaterson.com
CARPENTER and PATERSON, INC. TERMS and CONDITIONS of SALE
Effective 7-16-2007 1. PRICES & DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. point of shipment, unless otherwise stated. 2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on seller’s acceptance of an order, but seller assumes no responsibility or liability, and will accept no backcharge for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind beyond the control of seller. Under no circumstances shall seller be liable for any special or consequential damages or for loss, damage, or expenses directly or indirectly arising from delays or failure to give notice of delay. 3. SHIPMENTS: All products shipped will be carefully examined, counted, and packed. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of shipment. Claims for products damaged or lost in transit should be made on the carrier as seller’s responsibility ceases and the title passes on delivery to the carrier. 4. FREIGHT: All prices are F.O.B. point of shipment. On shipments weighing 2500 pounds or more, rail freight or motor freight at the lowest published rate is allowed to all US rail points or all US highway points listed in published tariffs (Hawaii and Alaska excluded). 5. RETURNS: Seller cannot accept the return of any product unless its written permission has been first obtained. Credit will be allowed on the basis of the price charged for the merchandise less a standard handling charge of twenty percent (20%) and less any freight charges allowed or paid by seller. Material not in first class salable condition will be subject to the total cost of reconditioning. Special, non-standard, and made-to-order products (either published or unpublished) are non-cancelable / non-returnable. 6. PRODUCT APPLICATION: Seller’s products are intended for installation and service as illustrated or described in seller’s catalog. Seller shall not be responsible for any losses or damage sustained by the buyer or any other person as a result of misapplication. Buyer shall defend, indemnify and save seller harmless from any and all liability or alleged liability, expenses, including legal fees arising from personal injuries including death or damage to property caused by reason of improper and/or negligent installation of pipe hangers designed and fabricated by seller. In accordance with our product development program, we reserve the right to revise the design and application of our products without notification. For latest product information, please contact the nearest Carpenter & Paterson office. 7. WARRANTY: Carpenter & Paterson, Inc. warrants for one (1) year from date of shipment that all products of Carpenter & Paterson manufacture will be free from defects in material and workmanship when used for the purpose which Carpenter & Paterson recommends. Carpenter & Paterson warrants the products which it sells of other manufacturers only to the extent they are warranted to Carpenter & Paterson by the supplier. Claim for breach of the above warranty must be made within thirty (30) days from the date the material was determined by the Buyer to be defective or in any event within twelve (12) months from the date of delivery to the original users, unless otherwise stated. If Carpenter & Paterson deems to its satisfaction that the products are defective, the product will be repaired or replaced by Carpenter & Paterson, and no other charge will be allowed for labor or expense in repairing or replacing said product by the Buyer. In any event the amount of any adjustment shall not exceed the net sales price of the defective product. Where engineering design or fabrication work is supplied, Buyer’s acceptance of Seller’s design or delivery of work, shall relieve Carpenter & Paterson of all further obligation other than as expressed in Carpenter & Paterson’s product warranty. The foregoing constitutes the Purchaser’s sole and exclusive remedy under Carpenter & Paterson warranty. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS OR FITNESS FOR A PARTICULAR PURPOSE. CARPENTER & PATERSON MAKES NO WARRANTY OF MECHANTABILITY. IN NO EVENT AND UNDER NO CIRCUMSTANCES WILL CARPENTER & PATERSON BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE ARISING IN ANY MANNER OUT OF THE USE OR APPLICATION OF THE GOODS WHICH ARE THE SUBJECT OF THIS PROPOSAL. UNDER NO CIRCUMSTANCES AND IN NO EVENT WILL CARPENTER & PATERSON BE LIABLE FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES WHETHER FOR BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE, OR ANY OTHER TORTIOUS ACT OR OMISSION. The terms of this warranty can be modified or changed only by authorization in writing by an officer of Carpenter & Paterson, Inc. Carpenter & Paterson neither assumes, nor authorizes any person to assume for it any obligation in connection with the sale of its products or parts of products which have been; repaired or altered outside of Sellers factory; subject to misuse, negligence, or accidents; or used in a manner contrary to the Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by the Buyer, or its representative. Carpenter & Paterson, Inc. reserves the right to revise product design without notification. 8. TAXES: The amount of taxes applicable to the sale of material or services shall be added to the purchase price and shall be paid by buyer unless buyer provides seller with an exemption certificate acceptable to the taxing authorities. 9. PRICING INFORMATION: Orders of any size will be accepted. However, orders less than $150.00 will be subject to a $25.00 handling charge in addition to the cost of the material and freight, if any. Prices are subject to change without notice. We are not responsible for typographical errors. 10. TERMS: Net thirty (30) days; 1-1/2% per month service charge (18% per annum) will be charged on all delinquent accounts plus court costs and attorney fees. Page 2
PICTORIAL INDEX
PIPE ATTACHMENTS
C L
C L
Figure 1ABand Hanger
Page 13
Figure 34Hinge Hanger
Page 17
Figure 72Pipe ClipPage 19
Figures 81, 81BRT, 81SG
Extension RingHangerPage 19
Figure 89Riser Clamp
Page 20
Figure 90Split Ring Hanger,
Double TappingPage 19
Figures 91, 91ZHeavy Duty ThreeBolt Pipe Clamp
Page 21
Figures 100, 100SSClevis Hanger
Page 22-24
Figure 100DIClevis Hanger forDuctile Iron Pipe
Page 22
Figure 100ELElongated
Clevis HangerPage 23
Figure 100SHRefrigeration
Hanger and ShieldPage 23
Figure 101Adjustable
Pipe SupportPage 24
Figure 101UAdjustable
Floor SupportPage 24
Figure 111Wire Pipe Hook
Page 26
Figure 114Short Clip
Page 27
Figure 124Riser Clamp
Page 27
Figure 125 Pipe Saddle
w/ U-Bolt Page 27
Figure 125SPFloor Support
Page 27
Figure 126Extension
Riser ClampPage 28
Figure 126LDPlastic Pipe Riser Clamp
Page 28
C L
C L
C L
C L
C L
CL
CL
C L C L
Page 3
PICTORIAL INDEX
Figure 127Anchor Chair
Page 28
Figure 136Pipe Support
Page 30
Figure 136SPFloor Support
Page 30
Figure 137Adjustable
Pipe SupportPage 30
Figure 138Threaded
Base StandPage 30
Figure 145Pipe Chair
Page 31
Figure 158Ductile Iron Pipe Clamp
Page 32
Figure 158DBDouble Bolt Ductile
Iron Pipe ClampPage 32
Figures 175, 175SPTwo Bolt
Pipe ClampPage 33
Figure 179Offset Pipe Clamp
Page 34
Figure 200Light Duty
Clevis HangerPage 35
Figure 200VVee Clevis Hanger
Page 35
Figure 200VTVee Trough
Page 35
Figure 221Wall Pipe Support
Page 36
Figure 222Short U-Bolt
Page 36
Figure 227Return Line Offset Hook
Page 36
Figure 227SReturn Line Hook
Page 36
Figure 237SOne Hole
Pipe ClampPage 36
Figure 240Adjustable SplitSwivel Hanger
Page 37
Figure 247Pipe Support
Page 37
C L
C L
C L
C L
C L
A
PIPE ATTACHMENTS
Page 4
PICTORIAL INDEX
Figure 258Underground Socket
Clamp WasherPage 37
Figure 267Extended Offset
Pipe ClampPage 38
Figure 282Right Angle Beam Clamp
Page 39
Figures 283, 283SSStandard U-Bolt
Page 39-40
Figure 283LLight Duty U-bolt
Page 40
Figure 298Heavy Duty TwoBolt Pipe Clamp
Page 40
Figure 304Three Bolt Pipe Clamp
Page 41
Figure 304ZAlloy Three Bolt
Pipe ClampPage 41
Figure 371Back-to-Back
Channel Assembly Page 43-44
Figure 374Angle Iron Support
Page 44
Figure 800AdjustableSwivel Ring
Page 46
Figure 800FPNFPA Swivel Ring
Page 46
Figure C1108Pipe Strap
Page 48
Figure 17Chair and Roll
Page 15
Figure 39Chair and Roll
Page 17
Figure 40Adjustable Chair
and RollPage 18
Figure 53Adjustable Chair
and RollPage 18
Figure 54Roller Chair
Page 18
CL CL
CLCL
PIPE ATTACHMENTS
PIPE ROLLS
Figure DWVDrain, Waste,Vent Clamp
Page 48
Page 5
PICTORIAL INDEX
Figure 63Roll and Plate
Page 19
Figure 67 Pipe RollNot Sold
Separately
Figure 109Adjustable
Roll SupportPage 26
Figure 110Roller Support
Page 26
Figure 140Harvard
Roll HangerPage 31
Figure 142Adjustable
Roll SupportPage 31
Figure 173Pipe Roll
Not Sold Separately
Figure 333Roller Support
Page 41
Figure 265GSInsulation Shield
Page 37
Figure 265PInsulation Shield
Page 38
Figure 265 CVBIron Pipe Insulation
ShieldPage 38
Figure 351 thru 357ZPipe Covering
Protection SaddlesPage 42-43
Figure 465 CVBHigh Temperature
Page 44
Figure 6Top Beam Clamp
Page 13
Figures 14 , 14AAdjustable
Beam ClampPage 14
Figure 15Beam Clamp
Page 14
Figure 18Top or Side
Beam ClampPage 15
Figure 31J Beam Hook
Page 15
C L
CL
Saddle withFig. 173 Roll
PIPE ROLLS
PIPE SADDLES AND SHIELDS
BEAM CLAMPS
Page 6
PICTORIAL INDEX
Figure 217Adjustable
Side Beam ClampPage 35
Figure 268Beam Clamp
Page 38
Figure 297Steel Beam Clamp
with EyenutPage 40
Figure 314Extended
Beam ClampPage 41
Figure 702Beam Clamp with
Swing NutPage 45
Figure 22C-Clamp
Retaining ClipPage 15
Figures 47, 47SSC-Clamp
with Locking NutPage 18
Figure 238C-Clamp without
Locking NutPage 37
Figure 192Top Beam Clampwith Locking Nut
Page 34
Figure 192RSTop Beam Clamp
Retaining ClipPage 34
Figure 192WWide Mouth Top
Beam ClampPage 34
Figure 196C-Clamp withLocking Nut
Page 35
Figure 290Purlin Clamp
Page 40
Figure 82Adjustable
Beam ClampPage 20
BEAM CLAMPS
C-CLAMPS
Page 7
PICTORIAL INDEX
Figure 9Angle knee Page 13
Figure 10Extension Bar
Page 13
Figure 49Wall Bracket
Page 18
Figure 69Light Welded Steel Bracket
Page 19
Figure 75 , 75NSteel Concrete Insert and Nut
Page 19
Figure 78Steel Bracket Clip Page 19
Figure 83Bracket Page 20
Figure 84Medium Welded
Steel Bracket Page 20
Figures 85E, 85B, 85SE
Single Plate Page 20
Figure 104FFemale Ceiling
Mount Bolt Page 25
Figure 104MMale Ceiling Mount Bolt
Page 25
Figure 108, 108NMalleable Concrete
Insert and Nut Page 25
Figure 113A, 113BWelded BeamAttachment
Page 26
Figure 139Heavy WeldedSteel Bracket
Page 30
Figure 143Metal Deck Ceiling Bolt
Page 31
Figure 150Steel Bracket
Page 31
Figure 151Ceiling Stirrup
Page 31
Figure 152Return Line Angle
Page 31
Figure 153, 153SSide BeamConnector Page 32
Figure 177Anchor Bolt
Page 34
C L
C L
C L
STRUCTURE ATTACHMENTS
Page 8
PICTORIAL INDEX
Figure 216Welding Clevis
Attachment Page 35
Figure 220Welding Lug
Page 35
Figure 450Pipe Sleeve
Page 44
Figure 453Waterproof Pipe Sleeve
Page 44
Figure 12Eye Socket Page 14
Figure 28Lag Rod Page 15
Figures 33, 33LMachine Thread Eye
Rod (Unwelded) Page 16
Figure 38Hanger Adjuster
Page 17
Figure 93, 93LWelded Eyerod Page 21-22
STRUCTURE ATTACHMENTS
RODS AND ROD ATTACHMENTS
Figure 650Steel Concrete Insert
Page 45
Figure 650NConcrete Insert Nut
Page 45
Figure 1020Concrete
Attachment Page 48
Figure 1022Concrete Single
Plate Lug Page 48
Figures 123, 123WSteel Rod Coupling
Page 27
Figure 94, 94SSAll-Thread
Hanger Rod Page 22
Figures 133, 133LMachine Thread
Rod Page 29
Figure 102Light Duty Washer
Plate Page 24
Figure 123RSteel Reducing Rod Coupling
Page 27
Figure 303Side Beam
Angle Bracket Page 41
Page 9
PICTORIAL INDEX
Figure 132Turnbuckle
Page 29
Figure 157Extension Piece
Page 32
Figures 167, 167RMalleable
Rod Coupling Page 33
Figure 224Round Hanger Rod
(Plain Ends) Page 36
Figure 260Washer Plate
Page 37
Figures 276, 276PForged Steel Clevis
Page 39
Figures 279, 279LForged Weldless
Eyenut Page 39
Figures 306, 341Linked Eye Rods Page 41-42
Figure 701Male and FemaleSwing Rod Fitting
Page 45
Figure 11Flattened End
Lag Screw Page 13
Figure 59Toggle Bolt
Page 18
Figure 107Steel Coach Screw
Page 25
Figures 165, 165HHex Nut Page 33
Figure 162Hex Head Bolt
Page 32
Figure 166Steel Drive Screw
Page 33
Figures 103, 103E,103G, 103S
Round Washer Page 24-25
Figure 176Lock Washer
Page 34
Figure 514Drop-In Type
Concrete Anchor Page 45
Figure 1309Wedge Anchor
Page 48
CL
RODS AND ROD ATTACHMENTS
FASTENERS
Page 10
PICTORIAL INDEX
Figure 1006Pipe Alignment
Guide Page 47
Figure 1007Pipe Alignment
Guide Page 47
Figure 1010Pipe Slide Assembly
Page 47
Figure 1A CTCopper Tubing Band Hanger
Page 49
Figure 12CTEye Socket
Page 49
Figure 34CTHinge Hanger for
Copper TubingPage 49
Figure 38CTHanger Adjuster
Page 49
Figure 66CTStamped Steel
HangerPage 49
Figure 72CTCopper Tubing
Pipe ClipPage 49
Figure 81CT, 81SCTCopper Extension
Ring Hanger Page 49-50
Figure 85CT, 85SCTSingle Plate
Page 50
Figure 90CTSplit Ring Hanger,
Double TappingPage 50
Figure 100CTCopper Clevis
HangerPage 50
C L
PIPE GUIDES AND SLIDES
COPPER TUBING HANGERS
Figure 126CTCopper Riser Clamp
Page 51
Figure 365 CVBCopper Tubing
Insulation Shield Upon Request
Figure 800CTCopper Tubing
Swivel RingPage 51
C L
Page 11
PICTORIAL INDEX
Figure 1A PVCPVC Band Hanger
Page 13
Figure 100PVCPVC Clevis Hanger
Page 23
Figure 126PVCPVC Coated Riser Clamp
Page 28
Figure 126LD PVCPlastic Pipe Riser Clamp
Page 28
Figure 283PVCPVC Coated
Standard U-BoltPage 40
Figure 800PVCPVC Coated
Adjustable Swivel RingPage 46
Figure 399Spring Hanger
Page 44
Figure 478Cushion
Spring Assembly Page 45
Figures 910, 920, 940, 960Variable Springs
Upon Request
Figures 880H, 880VConstant Springs
Upon Request
Figure 2250Rigid StrutsUpon Request
C L
CLCL
C L
C L
PVC COATED ATTACHMENTS
ENGINEERED PRODUCTS
Figure 2301, 2302Sway Brace Assemblies
Upon Request
Figure 7054Horizontal Traveler
Upon Request
Page 12
Box quantities are shown on Page 52 Page 13
BAND HANGER TOP BEAM CLAMP***
Electro- Wt. Wt. Pipe Size Plain Galv. Each Size Plain Paint Galv. Each
1/2" $2.99 $3.83 0.13 NO. 3 3/4 3.09 3.93 0.13 2" to 4" $44.33 $51.96 $53.56 1.051 3.18 4.19 0.14 4 1/2" to 6" 50.60 60.32 62.35 1.34
1 1/4 3.36 4.36 0.16 6 1/2" to 8" 56.24 68.04 70.51 1.621 1/2 3.43 4.61 0.18 8 1/2" to 12" 67.99 83.96 87.30 2.21
2 3.62 4.97 0.20 NO. 4 2 1/2 6.97 9.32 0.37 2" to 4" $66.49 $77.60 $79.92 1.59
3 7.33 10.52 0.43 4 1/2" to 6" 78.49 93.07 96.12 2.013 1/2 9.75 12.80 0.47 6 1/2" to 8" 89.27 106.63 110.25 2.42
4 10.87 15.90 0.69 8 1/2" to 12" 108.78 131.69 136.48 3.295 12.46 18.33 0.82 NO. 5 6 21.54 32.79 1.50 2" to 4" $111.26 $130.69 $134.76 2.778 34.78 48.55 1.89 4 1/2" to 6" 131.12 156.11 161.34 3.51
6 1/2" to 8" 149.40 179.25 185.49 4.228 1/2" to 12" 187.47 227.03 235.31 5.64
*** - Made Special to Customer Order
PVC BAND HANGER
Wt. ANGLE KNEE BRACKETPipe Size PVC Each
1/2" $15.89 0.13 Wt. 3/4 16.24 0.13 Size Plain Paint Galv. Each1 16.95 0.14 2" x 2" x 3/16" $9.17 $12.02 $12.62 0.41
1 1/4 17.66 0.16 2 x 2 x 1/4 11.58 15.25 16.03 0.531 1/2 18.20 0.18 2 1/2 x 2 1/2 x 1/4 15.45 21.35 22.58 0.85
2 22.87 0.20 3 x 3 x 1/4 22.34 31.36 33.26 1.302 1/2 26.49 0.37 3 x 3 x 3/8 31.63 44.12 46.73 1.80
3 29.14 0.43 4 x 4 x 1/4 38.84 54.13 57.31 2.203 1/2 40.88 0.47 4 x 4 x 3/8 57.64 80.55 85.34 3.30
4 44.59 0.69 4 x 4 x 1/2 75.59 105.43 111.68 4.305 61.63 0.826 86.71 1.50
EXTENSION BAR
Wt./TOP BEAM CLAMP*** Size Plain Paint Galv. Foot
NO. 0 (18 ga.) $6.18 $8.13 $8.53 0.12Wt. NO. 1 (16 ga.) 10.60 13.73 14.38 0.18
Size Plain Paint Galv. Each NO. 2 (14 ga.) 13.86 18.51 19.48 0.25NO. 1
2" to 4" $28.87 $32.06 $32.73 0.464 1/2" to 6" 31.17 35.27 36.13 0.596 1/2" to 8" 33.55 38.62 39.67 0.73 FLATTENED END LAG SCREW8 1/2" to 12" 40.27 47.15 48.58 0.99
NO. 2 Electro- Wt.2" to 4" $35.23 $39.53 $40.43 0.62 Size Plain Paint Galv. Each
4 1/2" to 6" 39.64 45.20 46.36 0.80 1/4" $14.67 $15.01 $15.09 0.046 1/2" to 8" 43.09 49.82 51.23 0.97 5/16 17.45 18.22 18.38 0.078 1/2" to 12" 50.86 60.58 62.61 1.33 3/8 19.08 19.50 19.58 0.10
FIGURE 10
FIGURE 11
FIGURE 1A FIGURE 6
FIGURE 1A PVC
FIGURE 6
FIGURE 9
Page 14 Box Quantities are shown on Page 52
EYE SOCKET BEAM CLAMP***
Electro- Wt. Wt. RodSize Plain Paint Galv. Each Size Plain Paint Galv. Each
1/4" $7.45 $7.79 $7.87 0.08 NO. 23/8 8.08 8.56 8.67 0.08 2" $39.20 $42.81 $43.57 0.741/2 9.59 10.49 10.68 0.11 3 46.62 50.93 51.83 0.825/8 18.93 20.25 20.53 0.22 4 58.71 64.13 65.26 1.093/4 30.92 33.07 33.52 0.30 5 66.22 72.33 73.61 1.217/8 56.29 59.35 59.98 0.32 6 71.42 78.02 79.40 1.31
7 82.73 90.37 91.97 1.398 90.24 98.57 100.32 1.50
NO. 3 2" $97.84 $106.87 $108.75 1.26
ADJUSTABLE BEAM CLAMP 3 112.85 123.26 125.44 1.494 142.87 156.06 158.82 1.89
Wt. 5 172.98 188.25 191.44 2.12 RodSize Plain Paint Galv. Each 6 174.83 190.80 194.14 2.29
3/8" $40.62 $41.85 $43.07 0.96 7 197.53 214.88 218.51 2.451/2 59.52 60.94 62.34 1.70 8 204.59 223.34 227.25 2.695/8 73.01 75.23 77.43 1.86 NO. 4 3/4 186.44 214.41 242.38 4.20 2" $157.88 $172.46 $175.51 2.107/8 641.73 678.50 686.18 5.56 3 180.40 197.06 200.54 2.321 945.24 996.40 1,007.11 7.70 4 218.01 238.14 242.35 2.85
5 240.61 262.83 267.47 3.186 255.62 279.22 284.16 3.397 288.83 313.82 319.04 3.608 300.76 328.52 334.33 3.92
ADJUSTABLE BEAM CLAMP NO. 5 3" $255.62 $279.22 $284.16 3.40
Wt. 4 308.25 336.71 342.67 4.08 RodSize Galv. Each 5 345.79 377.72 384.40 4.52
3/8" $121.85 2.56 6 360.87 394.19 401.16 4.801/2 459.14 3.48 7 384.37 419.78 427.18 5.105/8 874.16 5.24 8 420.66 459.53 467.66 5.513/4 997.79 7.18 10 473.63 517.36 526.51 6.237/8 1,237.53 8.92 NO. 6 1 1,509.92 11.3 3" $429.23 $468.80 $477.07 5.70
4 512.48 559.68 569.55 6.005 542.33 592.31 602.76 6.456 602.10 657.64 669.25 7.00
BEAM CLAMP*** 7 680.45 738.76 750.95 7.408 702.57 764.35 777.27 7.90
Wt. 10 736.69 804.72 818.94 8.80Size Plain Paint Galv. Each NO. 7
No. 1 4" $901.09 $984.40 $1,001.81 12.0 2" $39.20 $42.81 $43.57 0.52 5 903.21 986.52 1,003.93 12.03 46.62 50.93 51.83 0.62 6 1,052.70 1,149.89 1,170.21 12.84 58.71 64.13 65.26 0.78 7 1,127.41 1,231.54 1,253.31 13.65 66.22 72.33 73.61 0.88 8 1,129.53 1,233.66 1,255.43 14.46 71.42 78.02 79.40 0.95 10 1,279.02 1,397.03 1,421.70 16.07 82.73 90.37 91.97 1.10 *** - Made Special to Customer Order8 90.24 98.57 100.32 1.20
FIGURE 12
FIGURE 14
FIGURE 14A
FIGURE 15
FIGURE 15
Box quantities are shown on Page 52 Page 15
CHAIR AND ROLL "C" CLAMP RETAINING CLIP
Wt. Wt.Size Plain Paint Galv. Each Size Plain Paint Galv. Each
NO. 1A 3/8" or 1/2" 2" to 3 1/2" $202.10 $253.12 $263.79 7.00 x 4 1/2" $5.05 $6.16 $6.39 0.16
NO. 1 x 8 6.44 8.17 8.54 0.254" to 6" 254.71 334.89 351.65 10.5 x 10 7.45 9.95 10.47 0.36
NO. 2 x 14 9.34 12.46 13.12 0.458" to 10" 427.79 551.70 577.61 16.5 5/8" or 3/4"
NO. 3 x 4 1/2" $5.43 $7.51 $7.95 0.3012" to 14" 717.75 914.55 955.70 26.8 x 8 7.19 9.76 10.30 0.37
NO. 4 x 10 7.95 10.87 11.48 0.4216" to 20" 1,041.65 1,340.49 1,402.97 40.5 x 14 10.10 14.33 15.22 0.61
NO. 5 7/8"24" 1,209.42 1,581.15 1,658.88 51.0 x 4 1/2" $14.74 $16.89 $17.34 0.31
NO. 6 x 8 16.41 20.57 21.44 0.6030" 2,267.37 2,923.37 3,060.53 89.8 x 10 20.32 25.46 26.53 0.74
NO. 7 x 14 27.24 34.18 35.63 1.0036" to 42" 3,207.37 4,307.99 4,538.12 152 For Figure 238 and 193
BEAM CLAMP*** MACHINE THREAD LAG ROD
Wt. Wt.Size Plain Paint Galv. Each Size Plain Paint Galv. Each
NO. 1 3/8" x 4" $11.75 $12.65 $12.84 0.122" to 4" $44.77 $51.15 $52.49 0.92 x 6 12.41 13.73 14.00 0.19
4 1/2" to 6" 46.54 54.17 55.77 1.04 x 8 13.06 14.87 15.25 0.256 1/2" to 8" 49.01 57.34 59.08 1.12 x 10 14.07 16.29 16.76 0.318 1/2" to 12" 57.30 67.71 69.89 1.45 x 12 15.08 17.72 18.27 0.37
NO. 2 1/2" x 4" $18.16 $19.76 $20.09 0.222" to 4" $63.23 $72.95 $74.98 1.39 x 6 19.16 21.52 22.01 0.34
4 1/2" to 6" 65.43 76.54 78.86 1.56 x 8 20.66 23.78 24.43 0.446-1/2" to 8" 66.93 78.73 81.20 1.66 x 10 21.66 25.55 26.36 0.568-1/2" to 12" 69.22 84.49 87.68 2.11 x 12 22.66 27.31 28.28 0.67
NO. 3 5/8" x 4" $19.16 $21.52 $22.01 0.342" to 4" $88.12 $106.17 $109.95 2.53 x 6 20.16 23.77 24.52 0.52
4 1/2" to 6" 92.01 112.14 116.35 2.81 x 8 21.15 25.94 26.94 0.696 1/2" to 8" 95.09 115.92 120.27 2.98 x 10 22.66 28.69 29.96 0.878-1/2" to 12" 99.34 125.72 131.24 3.72 x 12 26.15 33.79 35.38 1.10
NO. 4 2" to 4" $151.79 $178.86 $184.52 3.90 FIGURE 31
4 1/2" to 6" 162.92 193.46 199.85 4.326-1/2" to 8" 173.33 205.26 211.94 4.578-1/2" to 12" 211.38 250.95 259.23 5.62 Wt.
NO. 5 Size Plain Paint Galv. Each2" to 4" $319.21 $370.58 $381.32 7.35 3/8" x 4" $11.75 $13.07 $13.35 0.19
4 1/2" to 6" 347.63 403.86 415.62 8.08 x 5 12.27 13.80 14.11 0.226 1/2" to 8" 374.92 433.92 446.26 8.48 x 6 12.71 14.45 14.81 0.258 1/2" to 12" 415.11 491.47 507.43 10.1 x 7 13.24 15.18 15.59 0.28
*** - Made Special to Customer Order x 8 13.78 16.00 16.47 0.32 x 10 14.22 16.86 17.41 0.38 x 12 15.89 18.94 19.58 0.44
J - BEAM HOOK***
FIGURE 22
FIGURE 28
FIGURE 17
FIGURE 18
Page 16 Box quantities are shown on Page 52
J - BEAM HOOK*** MACHINE THREAD EYERODS***
Wt. Wt.Size Plain Paint Galv. Each Size Plain Paint Galv. Each
1/2" x 4" $18.28 $20.57 $21.05 0.33 1/2" x 8" $63.61 $67.99 $68.90 0.60 x 5 18.45 21.16 21.73 0.39 x 10 68.24 73.41 74.49 0.71 x 6 18.72 21.84 22.49 0.45 x 12 77.70 83.68 84.93 0.82 x 7 19.16 22.63 23.36 0.50 x 14 93.64 100.49 101.93 0.94 x 8 19.78 23.67 24.48 0.56 x 18 109.12 117.87 119.70 1.20 x 10 20.57 25.22 26.20 0.67 x 24 133.97 144.90 147.19 1.50 x 12 22.07 26.87 28.00 0.78 x 30 158.35 172.20 175.10 1.90
5/8" x 4" $21.46 $25.68 $26.44 0.52 x 36 182.29 198.32 201.68 2.20 x 5 22.78 27.02 27.90 0.61 x 42 206.01 224.23 228.04 2.50 x 6 24.62 29.48 30.50 0.70 x 48 231.60 252.74 257.16 2.90 x 7 25.70 31.11 32.24 0.78 x 54 255.34 278.66 283.54 3.20 x 8 27.20 33.24 34.50 0.87 x 60 279.16 304.67 310.01 3.50 x 10 31.07 38.71 40.31 1.02 x 66 303.27 331.70 337.64 3.90 x 12 32.77 41.79 43.68 1.22 x 72 328.95 358.84 365.09 4.10
3/4" x 4" $55.62 $60.83 $61.92 0.75 5/8" x 8" $80.76 $87.90 $89.40 0.98 x 5 57.83 64.01 65.30 0.89 x 10 89.47 98.21 100.04 1.20 x 6 60.92 68.56 70.16 1.01 x 12 98.09 108.30 110.43 1.40 x 7 64.58 72.67 74.37 1.13 x 14 106.26 117.19 119.48 1.50 x 8 68.45 77.03 78.83 1.26 x 18 123.02 136.87 139.77 1.90 x 10 72.56 81.65 83.56 1.50 x 24 147.98 165.47 169.13 2.40 x 12 76.91 86.55 88.57 1.75 x 30 172.81 193.95 198.37 2.90
7/8" x 4" $60.92 $68.56 $70.16 1.02 x 36 197.48 222.26 227.44 3.40 x 5 64.63 72.96 74.71 1.20 x 42 222.80 251.96 258.05 4.00 x 6 72.14 81.86 83.89 1.36 x 48 250.98 283.78 290.63 4.50 x 7 74.88 85.99 88.31 1.53 x 54 271.09 307.54 315.16 5.00 x 8 76.65 89.15 91.76 1.71 x 60 296.13 336.22 344.60 5.50 x 10 81.67 96.25 99.30 2.04 x 66 321.07 364.80 373.95 6.00 x 12 93.42 110.08 113.57 2.39 x 72 345.17 393.28 403.34 6.60
*** - Made Special to Customer Order 3/4" x 8" $127.59 $138.00 $140.18 1.50 x 10 139.42 151.22 153.68 1.70 x 12 151.09 164.97 167.88 2.00 x 14 163.18 178.45 181.65 2.20
MACHINE THREAD EYERODS*** x 18 188.51 207.26 211.18 2.70 x 24 225.70 249.99 255.07 3.50
Wt. x 30 262.79 291.95 298.04 4.20Size Plain Paint Galv. Each x 36 299.87 334.58 341.84 5.00
3/8" x 8" $41.60 $43.82 $44.29 0.32 x 42 334.04 373.61 381.88 5.70 x 10 47.42 50.06 50.61 0.38 x 48 370.93 415.36 424.64 6.50 x 12 50.67 55.86 56.53 0.45 x 54 408.11 458.09 468.54 7.20 x 14 52.88 56.42 57.16 0.51 x 60 445.30 500.83 512.44 8.00 x 18 58.63 63.07 64.00 0.64 x 66 482.47 542.86 555.49 8.70 x 24 84.15 89.84 91.03 0.82 x 72 519.37 585.32 599.11 9.50 x 30 98.36 105.99 107.59 1.10 7/8" x 8" $147.90 $162.48 $165.52 2.10 x 36 110.99 119.32 121.06 1.20 x 10 161.24 177.90 181.38 2.40 x 42 125.66 135.38 137.41 1.40 x 12 174.04 193.47 197.54 2.80 x 48 139.68 152.18 154.79 1.80 x 14 187.10 208.62 213.12 3.10 x 54 153.82 166.31 168.93 1.80 x 18 213.42 239.79 245.31 3.80 x 60 167.94 181.82 184.73 2.00 x 24 253.15 286.47 293.44 4.80 x 66 181.28 196.55 199.75 2.20 x 30 292.98 333.24 341.66 5.80 x 72 196.02 212.68 216.17 2.40 *** Made Special to Customer Order
FIGURE 31
FIGURE 33
FIGURE 33
Box quantities are shown on Page 52Page 17
MACHINE THREAD EYERODS*** HINGE HANGER
Wt. Wt.Size Plain Paint Galv. Each Size Plain Paint Galv. Each
7/8" x 36" $331.39 $378.59 $388.46 6.80 1/2" $23.73 $24.35 $24.48 0.08 x 42 371.12 425.96 437.43 7.90 3/4 23.98 24.67 24.82 0.11 x 48 410.76 472.55 485.46 8.90 1 25.37 26.20 26.38 0.12 x 54 446.26 514.98 529.35 9.90 1 1/4 31.43 32.68 32.94 0.70 x 60 485.91 562.27 578.24 11.0 1 1/2 38.24 39.70 40.01 0.20 x 66 525.64 608.95 626.36 12.0 2 43.29 45.30 45.73 0.32 x 72 565.46 655.71 674.58 13.0 2 1/2 62.48 65.11 65.67 0.43
1" x 8" $219.06 $239.88 $244.24 3.00 3 78.13 81.74 82.49 0.67 x 10 235.93 260.23 265.31 3.50 3 1/2 80.12 85.20 86.10 0.86 x 12 253.32 280.40 286.06 3.90 4 81.41 87.66 88.96 0.93 x 14 270.46 301.01 307.39 4.40 6 241.95 260.00 263.78 2.64 x 18 300.39 337.18 344.87 5.30 8 397.70 432.41 439.67 3.84 x 24 353.36 400.57 410.44 6.80 x 30 402.03 458.95 470.85 8.20 x 36 455.01 519.57 533.07 9.30 x 42 503.66 580.02 595.98 11.0 HANGER ADJUSTER x 48 556.55 639.86 657.27 12.0 x 54 596.20 693.38 713.70 14.0 Wt. x 60 671.51 768.69 788.99 15.0 Size Plain Paint Galv. Each x 66 715.57 826.64 849.86 16.0 1/4" $27.64 $29.45 $29.82 0.09 x 72 759.65 884.60 910.72 18.0 3/8 27.64 29.45 29.82 0.28
*** Made Special to Customer Order 1/2 34.33 36.14 36.51 0.315/8 57.93 61.96 62.80 0.723/4 74.47 78.98 79.92 0.70
Add to Figure 33 price for 72 inch lengths foreach additional foot of rod or fraction thereof.
Wt.Size Plain Paint Galv. Each STEEL CHAIR & ROLL*** 3/8" $20.75 $23.39 $23.94 0.381/2 35.23 39.88 40.85 0.67 Wt.5/8 42.74 49.96 51.47 1.04 Size Plain Paint Galv. Each3/4 61.72 72.13 74.31 1.50 NO. 1A7/8 62.79 76.95 79.91 2.04 2" to 3 1/2" $355.67 $404.26 $414.42 7.001 85.03 103.57 107.44 2.67 NO. 1
4" to 6" 380.47 456.83 472.80 10.5Add to Figure 33 price for each additional NO. 2 2-1/2" of thread or fraction thereof. 8" to 10" 562.30 680.31 704.98 16.5
Wt. NO. 3 Size Plain Paint Galv. Each 12" to 14" 1,006.89 1,194.31 1,233.50 26.8 3/8" $4.13 $4.35 $4.39 0.03 NO. 4 1/2 7.51 7.90 7.98 0.06 16" to 20" 1,367.93 1,652.55 1,712.06 40.55/8 9.18 9.78 9.90 0.09 NO. 5 3/4 12.36 13.22 13.41 0.13 24" 1,985.68 2,339.71 2,413.73 51.07/8 14.40 15.58 15.83 0.17 NO. 6 1 17.04 18.58 18.91 0.22 30" 2,984.52 3,609.28 3,739.92 89.8
LEFT HAND THREADS:Add 25% to the prices for a Figure 33 of applicable size and length.
ADDITIONAL ROD LENGTHS:
FIGURE 33L
FIGURE 33 FIGURE 34
FIGURE 38
FIGURE 39
Page 18 Box quantities are shown on Page 52
ADJUSTABLE CHAIR & ROLL*** ADJUSTABLE CHAIR & ROLL
Wt. Wt.Size Plain Paint Galv. Each Size Plain Paint Galv. Each
NO. 1A NO. 1A2" to 3 1/2" $470.65 $581.72 $604.94 15.5 2" to 3 1/2" $624.10 $735.17 $758.40 15.5
NO. 1 NO. 1 4" to 6" 543.48 689.26 719.74 20.7 4" to 6" 720.70 866.47 896.95 20.7
NO. 2 NO. 2 8" to 10" 795.78 1,038.74 1,089.54 34.3 8" to 10" 1,055.28 1,298.24 1,349.04 34.3
NO. 3 NO. 3 12" to 14" 1,211.53 1,565.56 1,639.59 50.6 12" to 14" 1,790.17 2,144.20 2,218.23 50.6
NO. 4 NO. 4 16" to 20" 1,866.83 2,380.53 2,487.93 73.6 16" to 20" 2,758.47 3,272.17 3,379.57 73.6
NO. 5 NO. 5 24" 2,134.28 2,752.10 2,881.28 88.7 24" 3,153.71 3,771.53 3,900.71 88.7
NO. 6 NO. 6 30" 3,992.16 5,144.49 5,385.43 166 30" 5,742.12 6,894.45 7,135.39 166
*** Made Special to Customer Order
ROLLER CHAIR"C" CLAMP w/ LOCKING NUT
Wt.Wt. Pipe Size Plain Paint Galv. Each
Size Plain Paint Galv. Each 2" $85.45 $93.08 $94.68 1.10 3/8" $12.37 $15.49 $16.15 0.38 2 1/2 92.52 103.62 105.94 1.401/2 19.31 23.06 23.84 0.38 3 94.66 107.16 109.77 1.605/8 35.31 40.38 41.44 0.68 3 1/2 121.04 139.09 142.86 2.603/4 48.15 53.57 54.70 0.79 4 129.75 149.88 154.09 2.907/8 117.78 130.28 132.89 1.83 5 140.98 168.75 174.55 3.90
6 196.52 241.64 251.07 6.008 265.43 316.80 327.54 9.0010 332.95 416.25 433.67 13.8
STAINLESS STEEL "C" CLAMP 12 484.79 595.86 619.08 18.9w/ LOCKING NUT 14 529.72 728.26 769.77 28.1
16 657.83 903.57 954.95 34.9Type Type Wt. 18 936.38 1,245.29 1,309.88 44.4
Rod Size 304 316 Each 20 1,182.63 1,567.20 1,647.61 56.3 3/8" $97.66 $126.88 0.45 24 3,159.65 3,770.52 3,898.25 87.51/2 101.89 132.45 0.545/8 235.59 315.23 0.733/4 377.82 449.89 0.78
TOGGLE BOLT
Electro- Wt.WALL BRACKET Size Galv. Each
3/16" x 4" $3.87 0.05Wt. x 5 4.06 0.06
Size Plain Paint Galv. Each x 6 4.24 0.06NO. 1 $259.24 $279.38 $310.94 3.12 1/4" x 4" 4.50 0.08NO. 2 263.91 303.48 337.78 4.60 x 5 5.12 0.09NO. 3 282.85 380.03 422.97 13.5 x 6 5.74 0.10
3/8" x 4" $10.32 0.19 x 5 11.13 0.22 x 6 13.24 0.24
1/2" x 4" $41.18 0.32 x 6 48.21 0.40
FIGURE 49
FIGURE 40
FIGURE 47
FIGURE 53
FIGURE 54
FIGURE 59
FIGURE 47SS
Box quantities are shown on Page 52 Page 19
ROLL & PLATE CONCRETE INSERT NUT
Wt. Wt.Size Plain Paint Galv. Each Rod Size Plain Paint Galv. Each
NO. 1A 1/4" $4.00 $4.56 $4.67 0.082" to 3 1/2" $122.57 $149.64 $155.30 3.16 3/8 4.91 5.60 5.75 0.10
NO. 1 1/2 5.67 6.43 6.59 0.144" to 6" 150.19 189.07 197.20 4.75 5/8 6.75 7.72 7.93 0.16
NO. 2 3/4 8.08 9.19 9.42 0.178" to 10" 387.54 491.67 513.44 11.4
NO. 3 12" to 14" 782.68 977.05 1,017.69 21.9
NO. 4 STEEL BRACKET CLIP16" to 20" 940.83 1,246.26 1,310.13 28.2
NO. 5 Wt.24" 1,260.92 1,621.89 1,697.37 38.9 Size Plain Paint Galv. Each
NO. 6 NO. 1 $32.06 $37.61 $38.77 0.8030" 2,453.14 2,869.64 2,956.73 59.0 NO. 2 35.67 44.69 46.58 1.24
LIGHT WELDED STEEL BRACKETEXTENSION RING HANGER
Wt. (Rod Tap)Size Plain Paint Galv. Each Electro- Wt.
NO. 1 $415.99 $464.58 $474.74 6.99 Pipe Size Plain Galv. EachNO. 2 448.73 518.15 532.66 10.1 3/8" $4.32 $4.32 0.16NO. 3 453.59 529.95 545.91 10.5 1/2 4.40 4.40 0.17
3/4 5.18 5.18 0.201 5.62 5.62 0.21
1 1/4 6.40 6.40 0.29PIPE CLIP 1 1/2 8.62 8.62 0.31
2 10.14 10.14 0.35Electro- Wt. 2 1/2 16.10 16.10 0.57
Pipe Size Galv. Each 3 22.00 22.00 0.72 3/8" $0.92 0.03 4 28.70 28.70 1.161/2 2.70 0.043/4 3.12 0.071 4.17 0.09
1 1/4 4.54 0.101 1/2 4.67 0.14 EXTENSION RING HANGER
2 5.30 0.22 (Two Bolt, Rod Tap, Domestic)2 1/2 13.58 0.25 Electro- Wt.
3 17.33 0.30 Size Galv. Each4 21.08 0.40 1/2" $19.87 0.106 73.97 0.80 3/4 20.75 0.11
1 22.60 0.121 1/4 28.26 0.131 1/2 37.44 0.14
STEEL CONCRETE INSERT 2 47.58 0.16
Wt.Size Plain Paint Galv. Each
Case: Max 3/4" $11.35 $33.17 $37.72 2.50
FIGURE 75
FIGURE 75N
FIGURE 78
FIGURE 81 & 81BRT
FIGURE 81SG
FIGURE 69
FIGURE 63
FIGURE 72
Page 20 Box quantities are shown on Page 59
EXTENSION RING HANGER SINGLE PLATE (Rod Tap, Steel)(Rod Tap)
Type Type Wt. Electro- Wt.Size 304 316 Each Rod Tap Galv. Each 1/2" $79.64 $89.36 0.17 3/8" $13.25 0.173/4 82.11 91.73 0.201 89.36 98.99 0.21
1 1/4 103.85 108.71 0.291 1/2 135.19 140.05 0.31 SINGLE PLATE (Rod Tap)
2 251.13 289.72 0.352 1/2 289.80 328.38 0.57 Type Type Wt.
3 330.77 367.06 0.72 Rod Tap 304 316 Each4 350.11 388.79 1.16 3/8" $60.40 $72.41 0.20
1/2 67.64 80.89 0.18
BEAM CLAMP w/ EXTENSION PIECE RISER CLAMP***
Wt. Wt.Size Plain Paint Galv. Each Size Plain Paint Galv. Each
Body Only $61.85 $76.14 $79.13 2.30 1/2" $49.54 $59.26 $61.29 1.30 3/8" 77.50 93.18 96.46 2.50 3/4 49.63 59.35 61.38 1.361/2 85.07 102.14 105.71 2.70 1 56.96 66.68 68.71 1.385/8 90.75 108.10 111.73 2.74 1 1/4 61.81 75.69 78.59 1.953/4 104.26 123.06 126.99 2.95 1 1/2 66.22 80.80 83.85 2.017/8 118.90 138.60 142.73 3.08 2 70.30 86.27 89.61 2.17
2 1/2 84.42 100.39 103.73 2.293 102.86 120.91 124.69 2.504 119.37 143.67 148.75 3.42
BRACKET 5 136.69 172.09 179.50 5.106 152.86 191.04 199.02 5.50
Wt. 8 350.90 420.32 434.83 10.0Size Plain Paint Galv. Each 10 401.41 484.71 502.13 11.4
NO. 1 $132.18 $150.93 $154.85 2.70 12 618.80 743.76 769.88 17.6NO. 2 156.03 178.24 182.88 3.20 14 676.91 815.75 844.78 19.3NO. 3 181.46 212.00 218.39 4.40 16 1,142.69 1,371.77 1,419.67 32.5
18 1,187.63 1,423.65 1,473.00 33.820 1,231.07 1,474.03 1,524.83 35.0
*** Made Special to Customer OrderMEDIUM WELDED STEEL BRACKET
Wt.Size Plain Paint Galv. Each SPLIT RING HANGER -
NO. 0 $934.99 $1,046.06 $1,069.99 15.5 DOUBLE TAPPING (Rod Tap)NO. 1 1,110.94 1,312.25 1,354.34 24.7 Electro- Wt.NO. 2 1,469.51 1,795.78 1,863.99 37.7 Size Galv. Each
3/8" $30.11 0.161/2 31.07 0.173/4 33.21 0.20
SINGLE PLATE (Rod Tap) 1 35.23 0.211 1/4 43.44 0.29
Electro- Wt. 1 1/2 62.60 0.31Rod Tap Plain Galv. Each 2 83.71 0.35
3/8" $4.25 $5.24 0.19 2 1/2 167.06 0.571/2 7.20 8.89 0.18 3 198.14 0.72
4 360.87 1.16
FIGURE 81SS
FIGURE 82
FIGURE 85B & 85E
FIGURE 85SE
FIGURE 85SS
FIGURE 89
FIGURE 90
FIGURE 83
FIGURE 84
Box quantities are shown on Page 52 Page 21
HEAVY DUTY 3 BOLT WELDED EYE ROD ***PIPE CLAMP
Wt. Electro- Wt.Size Plain Paint Galv. Each Rod Size Plain Paint Galv. Each 6" $430.39 $534.52 $556.29 14.3 5/8" x 8" $229.85 $236.65 $238.07 0.988 613.40 773.06 806.45 22.2 x 10 238.58 246.91 248.65 1.2010 945.47 1,195.37 1,247.63 35.1 x 12 247.51 257.22 259.26 1.4012 1,662.11 2,071.68 2,157.32 58.1 x 14 251.82 262.24 264.41 1.5014 1,776.59 2,276.40 2,380.90 71.3 x 18 265.16 278.35 281.11 1.9016 1,891.07 2,626.90 2,780.75 106 x 24 287.24 303.90 307.38 2.4018 2,829.85 3,898.88 4,122.41 154 x 30 304.73 324.15 328.21 2.9020 3,300.63 4,529.32 4,786.23 176 x 36 326.88 350.48 355.42 3.4024 3,522.89 5,175.03 5,520.48 237 x 42 349.05 376.81 382.62 4.0030 9,404.85 12,105.20 12,669.82 388 x 48 371.12 402.36 408.89 4.5036 22,277.56 26,984.09 27,968.18 678 x 54 393.11 427.82 435.07 5.00
*** Made Special to Customer Order x 60 410.76 448.94 456.93 5.50 x 66 432.94 474.59 483.30 6.00 x 72 455.01 500.83 510.41 6.60
3/4" x 8" $291.57 $301.98 $304.16 1.50WELDED EYEROD *** x 10 304.98 316.79 319.25 1.70
x 12 313.73 327.61 330.52 2.00Electro- Wt. x 14 326.88 342.15 345.35 2.20
Rod Size Plain Paint Galv. Each x 18 349.05 367.79 371.71 2.703/8" x 8" $101.82 $104.04 $104.50 0.32 x 24 379.78 404.07 409.15 3.50
x 10 106.13 108.77 109.32 0.38 x 30 410.76 439.92 446.02 4.20 x 12 110.46 113.59 114.24 0.45 x 36 446.26 480.96 488.22 5.00 x 14 114.88 118.83 119.67 0.51 x 42 481.33 520.90 529.17 5.70 x 18 119.21 123.65 124.58 0.64 x 48 512.32 557.44 566.87 6.50 x 24 128.30 133.99 135.18 0.82 x 54 543.39 593.37 603.82 7.20 x 30 132.63 140.26 141.86 1.10 x 60 578.54 634.07 645.69 8.00 x 36 145.97 154.30 156.04 1.20 x 66 609.61 670.01 682.64 8.70 x 42 154.70 164.42 166.45 1.40 x 72 645.03 710.98 724.77 9.50 x 48 163.62 174.73 177.05 1.60 7/8" x 8" $353.37 $367.95 $371.00 2.10 x 54 172.36 184.85 187.47 1.80 x 10 371.12 387.78 391.26 2.40 x 60 181.28 195.17 198.07 2.00 x 12 384.37 403.81 407.87 2.80 x 66 190.02 205.29 208.48 2.20 x 14 397.61 419.13 423.63 3.10 x 72 198.76 215.42 218.91 2.40 x 18 424.18 450.56 456.08 3.80
1/2" x 8" $154.70 $158.87 $159.74 0.60 x 24 468.25 501.58 508.54 4.80 x 10 159.03 163.96 164.99 0.71 x 30 507.99 548.25 556.67 5.80 x 12 163.62 169.32 170.51 0.82 x 36 552.14 599.34 609.21 6.80 x 14 167.94 174.47 175.83 0.94 x 42 591.87 646.71 658.18 7.90 x 18 176.69 185.02 186.76 1.20 x 48 631.69 693.47 706.39 8.90 x 24 194.36 204.77 206.95 1.50 x 54 671.51 740.91 755.44 9.90 x 30 207.77 220.96 223.72 1.90 x 60 715.57 791.93 807.90 11.0 x 36 216.33 231.60 234.80 2.20 x 66 759.65 842.95 860.36 12.0 x 42 238.58 255.94 259.57 2.50 x 72 799.29 889.53 908.40 13.0 x 48 251.82 271.95 276.16 2.90 *** Made Special to Customer Order x 54 269.58 291.79 296.44 3.20 x 60 282.82 307.12 312.20 3.50 x 66 300.39 327.46 333.12 3.90 x 72 313.73 342.19 348.14 4.10
FIGURE 91
FIGURE 93
FIGURE 93
Page 22 Box quantities are shown on Page 52
WELDED EYE ROD *** ALL THREAD ROD
Electro- Wt. Type Wt./Rod Size Plain Paint Galv. Each Rod Size 304 Foot
1" x 8" $450.58 $471.41 $475.76 3.00 1/4" $10.20 0.12 x 10 468.25 492.55 497.63 3.50 3/8 11.82 0.30 x 12 485.91 512.98 518.65 3.90 1/2 21.42 0.54 x 14 503.66 534.20 540.59 4.40 5/8 31.54 0.85 x 18 538.80 575.59 583.28 5.30 3/4 40.78 1.20 x 24 591.87 639.07 648.94 6.80 7/8 60.00 1.70 x 30 645.03 701.95 713.85 8.20 1 90.03 2.30 x 36 702.15 766.71 780.21 9.30 x 42 755.23 831.59 847.55 11.0 x 48 808.38 891.68 909.10 12.0 x 54 861.18 958.37 978.69 14.0 CLEVIS HANGER x 60 914.25 1,018.37 1,040.14 15.0 x 66 967.32 1,078.39 1,101.61 16.0 Wt. x 72 1,024.72 1,149.67 1,175.80 18.0 Pipe Size Plain Paint Galv. Each
*** Made Special to Customer Order 1/2" $6.69 $8.46 $10.22 0.273/4 6.69 8.46 10.22 0.291 6.82 8.96 10.73 0.33
1 1/4 7.32 9.97 12.12 0.36Add to Figure 93 price for 72 inch lengths for 1 1/2 7.57 11.11 13.38 0.42each additional foot of rod or fraction thereof. 2 9.34 13.76 15.90 0.52
Electro- Wt. 2 1/2 14.64 19.31 27.14 0.61Rod Size Plain Paint Galv. Each 3 17.54 22.47 31.68 0.90
3/8" $22.25 $24.89 $25.44 0.38 3 1/2 19.18 25.24 34.58 0.991/2 37.88 42.53 43.50 0.67 4 21.96 30.29 38.24 1.405/8 45.92 53.14 54.65 1.04 5 29.16 37.36 53.01 2.103/4 66.31 76.73 78.90 1.50 6 38.87 50.23 64.12 3.007/8 85.83 99.99 102.95 2.04 7 52.98 67.19 86.56 5.421 101.89 120.43 124.30 2.67 8 60.33 74.09 107.16 4.50
10 110.31 134.67 172.53 9.1012 144.89 195.25 222.89 11.814 188.19 283.86 307.84 14.3
LEFT HAND THREADS: 16 283.98 433.17 449.32 20.8Add 25% to the prices for a Figure 93 of 18 342.55 527.20 540.20 23.0applicable size and length. 20 648.99 794.77 1,135.17 41.5
24 1,052.63 1,276.53 1,481.88 50.030 1,703.77 2,006.55 2,345.31 68.1
ALL THREAD ROD
Electro- Wt./ DUCTILE IRON & CAST IRONRod Size Plain Galv. Foot CLEVIS HANGER
1/4" $3.77 $4.17 0.12 Wt.5/16 3.95 4.99 0.20 Pipe Size Plain Paint Galv. Each3/8 4.03 5.87 0.30 4" $53.51 $68.09 $71.14 2.081/2 6.35 9.84 0.53 6 75.35 94.79 98.85 2.78
5/8" 9.01 14.64 0.84 8 89.99 121.23 127.76 4.473/4 15.88 23.29 1.20 10 129.24 191.03 203.94 8.877/8 19.90 30.80 1.70 12 186.67 269.97 287.39 12.01 33.89 47.46 2.30 14 279.82 390.89 414.11 15.2
1 1/4 56.20 76.11 3.60 16 371.20 537.80 572.63 23.61 3/8 66.49 91.38 4.30 18 453.99 634.48 672.22 25.91 1/2 83.92 111.70 5.10 20 872.90 1,185.28 1,250.59 44.3
24 979.93 1,354.78 1,433.16 53.5
FIGURE 100DI
FIGURE 93 FIGURE 94SS
FIGURE 100
ADDITIONAL ROD LENGTHS:
FIGURE 93L
FIGURE 94
Box quantities are shown on Page 52 Page 23
ELONGATED CLEVIS HANGER PVC CLEVIS HANGER
Wt. Wt.Pipe Size Plain Paint Galv. Each Pipe Size PVC Each
3/4" $23.98 $30.51 $31.87 0.70 1/2" $31.00 0.331 24.23 30.83 32.21 0.74 3/4 31.07 0.38
1 1/4 25.28 31.87 33.47 0.78 1 31.62 0.421 1/2 27.14 34.77 36.37 0.81 1 1/4 33.28 0.47
2 32.18 41.21 43.10 0.88 1 1/2 36.30 0.592 1/2 37.36 47.08 49.11 1.83 2 37.18 0.64
3 40.77 53.96 56.71 1.97 2 1/2 51.22 1.103 1/2 47.77 62.35 65.40 2.06 3 55.46 1.20
4 53.64 71.00 74.62 2.57 4 60.66 2.105 68.16 88.98 93.34 3.00 5 139.96 2.906 88.10 115.17 120.83 4.05 6 226.76 3.708 145.27 185.53 193.95 6.0010 214.69 284.11 298.62 10.112 240.82 331.06 349.93 12.9
& SHIELDFELT LINED CLEVIS HANGER Wt.
Pipe Size Plain Paint Galv. EachElectro- Wt. 1 1/2" $64.46 $72.09 $73.69 1.10
Pipe Size Galv. Each 2 66.93 75.96 77.84 1.30 1/2" $14.12 0.34 2 1/2 73.63 89.60 92.94 2.303/4 14.40 0.39 3 76.91 94.27 97.90 2.501 15.63 0.44 3 1/2 89.89 110.02 114.23 2.90
1 1/4 17.04 0.45 4 96.96 120.56 125.49 3.401 1/2 18.54 0.55 5 120.62 148.39 154.20 4.00
2 21.90 0.61 6 142.85 181.03 189.01 5.502 1/2 34.78 1.40 7 163.89 217.34 228.52 7.70
3 43.80 1.50 8 228.26 283.79 295.40 8.003 1/2 48.66 1.70 10 400.78 490.33 509.05 12.9
4 54.31 2.10 12 478.49 590.95 614.46 16.25 79.02 2.40 14 595.76 732.51 761.10 19.76 109.31 3.60 16 700.48 885.13 923.74 26.68 145.42 5.00 18 1,155.95 1,369.06 1,413.62 30.710 P.O.A. 8.80 20 1,296.33 1,640.65 1,712.64 49.612 P.O.A. 11.4 24 2,488.72 2,883.01 2,965.45 56.814 P.O.A. 14.816 P.O.A. 21.018 P.O.A. 24.420 P.O.A. 42.6 STAINLESS STEEL CLEVIS24 P.O.A. 48.4 HANGER30 P.O.A. 69.5 Type Type Wt.
Pipe Size 304 316 Each 1/2" $53.59 $69.66 0.343/4 58.71 76.28 0.391 62.16 81.67 0.44
1 1/4 66.67 85.91 0.45 1 1/2" 75.06 97.48 0.55
2 87.59 113.81 0.612 1/2 165.66 215.11 1.40
3 206.01 267.81 1.504 265.08 344.46 2.105 377.75 491.48 2.40
FIGURE 100PVC
FIGURE 100SS
FIGURE 100SHREFRIGERATION HANGERFIGURE 100F
FIGURE 100EL
Page 24 Box quantities are shown on Page 52
STAINLESS STEEL CLEVIS ADJUSTABLE PIPE SUPPORTHANGER
Type Type Wt. Wt.Pipe Size 304 316 Each Pipe Size Plain Paint Galv. Each
6" $447.68 $582.06 3.60 14" $2,009.46 $2,258.87 $2,311.03 35.98 706.75 918.66 5.00 16 2,110.81 2,376.33 2,431.85 38.310 1,172.00 1,523.43 8.80 18 2,930.32 3,419.22 3,521.45 70.412 1,486.79 1,932.60 11.4 20 3,079.63 3,595.05 3,702.82 74.314 P.O.A. P.O.A. 14.8 24 3,552.55 4,189.11 4,322.21 91.716 P.O.A. P.O.A. 21.0 30 3,940.79 4,689.60 4,846.17 10818 P.O.A. P.O.A. 24.4 36 5,637.99 6,418.94 6,582.23 11320 P.O.A. P.O.A. 42.624 P.O.A. P.O.A. 48.430 P.O.A. P.O.A. 69.5
LIGHT DUTY WASHER PLATE
Wt.Size Plain Paint Galv. Each
ADJUSTABLE PIPE SUPPORT 1/8" x 2" x 2" $4.76 $5.73 $5.93 0.14x 3 x 3 11.83 14.05 14.51 0.32
Wt. x 4 x 4 16.43 20.39 21.22 0.57Pipe Size Plain Paint Galv. Each x 5 x 5 25.43 31.61 32.90 0.89
1 1/2" $489.26 $522.58 $529.54 4.75 x 6 x 6 36.37 45.40 47.29 1.282 489.71 523.03 530.00 4.80 3/16" x 2" x 2" $6.18 $7.64 $7.95 0.21
2 1/2 491.10 525.11 532.23 4.90 x 3 x 3 14.22 17.56 18.25 0.483 497.79 532.50 539.76 5.00 x 4 x 4 25.87 31.64 32.84 0.834 720.68 785.24 798.74 9.30 x 5 x 5 39.91 49.63 51.66 1.335 730.91 797.89 811.90 9.65 x 6 x 6 55.09 68.28 71.04 1.916 765.62 846.83 863.82 11.7 1/4" x 2" x 2" $9.62 $11.56 $11.97 0.288 835.66 925.21 943.94 12.9 x 2 1/2 x 2 1/2 11.38 14.44 15.08 0.4410 923.13 1,021.01 1,041.48 14.1 x 3 x 3 16.43 20.88 21.80 0.6412 957.59 1,063.80 1,086.00 15.3 x 4 x 4 28.26 36.59 38.33 1.1314 1,211.66 1,362.29 1,393.79 21.7 x 5 x 5 44.33 56.82 59.43 1.7716 1,304.80 1,481.12 1,517.99 25.4 x 6 x 6 66.93 84.98 88.75 2.5518 1,714.24 1,987.05 2,044.10 39.3 3/8" x 2" x 2" $10.43 $13.34 $13.95 0.4220 2,322.47 2,634.15 2,699.32 44.9 x 2 1/2 x 2 1/2 16.51 21.09 22.05 0.6624 3,810.66 4,187.60 4,266.41 54.3 x 3 x 3 23.67 30.26 31.64 0.9530 4,006.80 4,439.96 4,530.53 62.4 x 4 x 4 41.85 53.65 56.12 1.7036 4,888.53 5,375.84 5,477.73 70.2 x 5 x 5 66.93 85.67 89.59 2.66
x 6 x 6 105.52 132.59 138.25 3.83
ADJUSTABLE PIPE SUPPORT ROUND WASHER
Wt. Bolt / Rod 103 103E 103G Wt.Pipe Size Plain Paint Galv. Each Size Plain Electro-G HD Galv. Each
2 1/2" $548.99 $594.18 $603.63 6.51 1/4" $0.43 $0.48 P.O.A. 0.013 565.65 615.36 625.75 7.16 5/16 0.51 0.61 P.O.A. 0.02
3 1/2 609.00 658.77 669.18 7.17 3/8 0.67 0.80 P.O.A. 0.024 834.02 923.29 941.96 12.9 1/2 1.17 1.42 P.O.A. 0.045 846.90 938.60 957.77 13.2 5/8 2.51 2.70 P.O.A. 0.086 859.90 970.62 993.77 16.0 3/4 3.60 3.74 P.O.A. 0.118 957.97 1,083.96 1,110.30 18.210 1,118.26 1,265.63 1,296.45 21.212 1,255.20 1,431.94 1,468.89 25.5
FIGURE 101U
FIGURE 101U
FIGURE 101
FIGURE 103 (E) (G)
FIGURE 100SS
FIGURE 102
Box quantities are shown on Page 52Page 25
ROUND WASHER STEEL COACH SCREW
Bolt / Rod Type Type Wt. Electro- Wt.Size 304 316 Each Size Plain Galv. Each 1/4" $0.74 $0.88 0.01 1/4" x 1 1/2" $4.15 $4.40 0.025/16 0.95 1.09 0.02 x 2 5.20 5.54 0.033/8 1.17 1.65 0.02 x 2 1/2 5.91 6.24 0.031/2 2.36 2.55 0.04 x 3 6.71 7.05 0.045/8 4.27 4.48 0.08 x 3 1/2 7.85 8.19 0.043/4 9.40 9.62 0.11 x 4 8.04 8.46 0.05
x 5 13.34 13.84 0.06x 6 16.95 17.62 0.07
3/8" x 1 1/2" $5.48 $5.98 0.06x 2 6.53 7.11 0.07
FEMALE CEILING x 2 1/2 6.97 7.64 0.08MOUNT BOLT x 3 8.48 9.32 0.10
Wt. x 4 9.72 10.73 0.13Rod Size Plain Paint Galv. Each x 5 13.34 14.60 0.15
3/8" $80.26 $85.81 $86.97 0.80 x 6 16.07 17.58 0.181/2 87.68 94.14 95.49 0.93 1/2" x 2" $9.37 $10.54 0.145/8 107.36 118.46 120.79 1.56 x 2 1/2 10.69 12.03 0.163/4 168.48 185.14 188.63 2.37 x 3 13.15 14.66 0.197/8 187.73 212.72 217.95 3.55 x 4 14.22 16.15 0.231 249.79 278.25 284.20 4.08 x 5 17.32 19.75 0.29
1 1/4 501.37 552.05 562.64 7.30 x 6 20.93 23.78 0.341 1/2 780.47 851.14 865.91 10.2 5/8" x 2" $23.67 $25.60 0.23
x 2 1/2 24.55 26.81 0.27x 3 26.83 29.35 0.31x 4 28.97 32.32 0.38x 5 34.71 38.57 0.46
MALE CEILING MOUNT BOLT x 6 37.80 42.25 0.53
Wt.Rod Size Plain Paint Galv. Each
3/8" $65.96 $72.21 $73.51 0.901/2 71.08 79.41 81.16 1.15 MALLEABLE CONCRETE5/8 83.35 96.54 99.30 1.91 INSERT3/4 119.37 139.50 143.71 2.88 Electro- Wt.7/8 139.52 168.67 174.77 4.15 Plain Galv. Each1 183.67 218.38 225.63 4.98 Body Only $30.79 $41.71 1.30
1 1/4 292.27 331.15 339.28 8.04
CONCRETE INSERT NUT
Electro- Wt.Rod Size Plain Galv. Each
3/8" $10.80 $12.18 0.201/2 10.80 12.18 0.215/8 10.80 12.18 0.203/4 10.80 12.18 0.227/8 10.80 12.18 0.21
FIGURE 108N
FIGURE 104F
FIGURE 103S
FIGURE 104M
FIGURE 107
FIGURE 108
Page 26 Box quantities are shown on Page 52
ADJUSTABLE ROLL SUPPORT WIRE PIPE HOOKS
Wt. Copper Wt.Pipe Size Plain Paint Galv. Each Size Plain Plated Each
1 1/4" $75.85 $78.76 $85.09 1.08 3/4" x 10" $6.15 $9.22 0.121 1/2 78.38 81.80 88.45 1.11 x 12 6.90 10.36 0.14
2 79.89 86.50 94.16 1.65 1" x 4" $3.21 $4.81 0.062 1/2 86.71 100.14 110.21 2.72 x 6 3.86 5.79 0.08
3 90.12 103.35 113.62 2.72 x 8 5.30 7.95 0.103 1/2 99.84 112.52 123.34 2.72 x 10 6.42 9.64 0.12
4 112.08 131.93 145.65 3.91 x 12 7.08 10.62 0.145 130.63 154.02 170.08 4.63 1 1/4" x 6" $4.25 $6.38 0.086 186.54 222.48 246.14 7.07 x 8 4.82 7.23 0.108 252.30 316.61 353.02 11.4 x 10 6.15 9.22 0.1210 301.40 376.02 418.90 13.7 x 12 7.08 10.62 0.16
12" 459.92 570.99 594.22 15.9 1 1/2" x 6" $4.82 $7.23 0.1014 496.65 697.96 740.06 28.7 x 8 5.58 8.37 0.1216 624.51 923.00 985.42 42.5 x 10 6.23 9.35 0.1418 900.29 1,226.55 1,294.77 46.6 x 12 7.08 10.62 0.1620 1,112.07 1,577.17 1,674.42 66.224 2,597.87 3,312.87 3,462.37 10330 4,386.32 5,684.44 5,955.86 187
WELDED BEAM ATTACHMENTw/o BOLT & NUT
Wt.ROLLER SUPPORT*** Rod Size Plain Paint Galv. Each
3/8" $32.69 $39.35 $40.75 0.96Wt. 1/2 32.69 39.35 40.75 0.96
Pipe Size Plain Paint Galv. Each 5/8 34.46 41.12 42.51 0.96 2" $122.57 $128.05 $129.20 0.79 3/4 37.61 50.80 53.56 1.90
2 1/2 144.81 155.22 157.40 1.44 7/8 54.40 71.75 75.38 2.503 150.46 162.26 164.73 1.62 1 77.75 107.60 113.84 4.30
3 1/2 157.62 169.42 171.88 1.64 1 1/4 263.28 319.51 331.27 8.104 204.24 217.43 220.19 1.82 1 1/2 540.83 649.12 671.76 15.65 238.23 258.36 262.57 2.90 1 3/4 634.10 763.91 791.05 18.76 291.21 323.84 330.66 4.668 446.18 496.85 507.45 7.2910 533.07 609.43 625.39 10.212 627.54 717.78 736.65 12.3 WELDED BEAM ATTACHMENT14 998.13 1,150.85 1,182.78 21.4 w/ BOLT & NUT16 1,213.59 1,407.96 1,448.60 27.8 Wt.
*** Made Special to Customer Order Rod Size Plain Paint Galv. Each 3/8" $39.63 $47.96 $49.70 1.201/2 42.41 51.43 53.32 1.305/8 44.81 55.91 58.24 1.60
WIRE PIPE HOOKS 3/4 62.48 81.91 85.98 2.807/8 78.13 105.20 110.86 3.90
Copper Wt. 1 114.85 158.59 167.73 6.30Size Plain Plated Each 1 1/4 404.01 474.82 489.62 10.2
1/2" x 4" $2.93 $4.39 0.06 1 1/2 777.35 909.25 936.82 19.0 x 6 3.70 5.55 0.08 1 3/4 1,006.68 1,180.23 1,216.52 24.2x 8 4.82 7.23 0.10 2 1,568.46 1,783.66 1,828.65 30.6
x 10 6.15 9.22 0.12 2 1/4 2,306.44 2,563.28 2,616.99 36.8 x 12 6.90 10.36 0.14 2 1/2 2,475.94 2,753.62 2,811.67 39.7
3/4" x 4" $2.93 $4.39 0.06 2 3/4 3,090.35 3,368.03 3,426.08 39.7 x 6 3.70 5.55 0.08 3 3,733.67 4,073.82 4,144.94 49.0x 8 5.02 7.53 0.10 3 1/4 4,569.21 5,041.25 5,139.95 67.6
3 1/2 5,505.84 6,061.18 6,177.30 79.3
FIGURE 109
FIGURE 110
FIGURE 111
FIGURE 111
FIGURE 113A
FIGURE 113B
Box quqntities ae shown on Page 52 Page 27
SHORT CLIP RISER CLAMP
Wt. Wt.Pipe Size Plain Paint Galv. Each Pipe Size Plain Paint Galv. Each
1/2" $16.91 $18.30 $18.59 0.20 2" $1,318.05 $1,439.54 $1,464.94 17.53/4 17.29 18.89 19.22 0.23 2 1/2 1,349.48 1,482.07 1,509.79 19.11 18.05 19.85 20.23 0.26 3 1,472.16 1,676.25 1,718.92 29.4
1 1/4 19.94 22.44 22.96 0.36 4 1,598.12 1,865.38 1,921.26 38.51 1/2 25.12 28.87 29.65 0.54 5 1,862.04 2,161.92 2,224.63 43.2
2 25.87 30.04 30.91 0.60 6 2,013.12 2,407.41 2,489.85 56.82 1/2 46.57 56.29 58.32 1.40 8 2,359.20 2,908.98 3,023.94 79.2
3 48.97 60.08 62.40 1.60 10 4,073.69 5,066.36 5,273.92 1434 61.84 75.03 77.79 1.90 12 5,916.42 7,193.70 7,460.77 184
14 7,538.65 8,711.81 8,957.11 19516 8,114.31 9,676.21 10,002.79 22518 8,689.97 10,640.61 11,048.48 28120 15,701.30 18,679.32 19,302.00 429
STEEL ROD COUPLING 24 17,006.10 20,234.03 20,908.96 465
Electro- Wt.Rod Size Plain Paint Galv. Each
1/4" $6.06 $6.20 $6.23 0.023/8 6.50 6.61 6.73 0.08 PIPE STANCHION 1/2 6.58 6.77 6.94 0.12 w/ U-BOLT***5/8 11.36 12.54 12.79 0.17 Wt.3/4 21.58 23.53 23.93 0.28 Pipe Size Plain Paint Galv. Each7/8 53.89 56.95 57.59 0.44 4" $273.25 $309.35 $316.90 5.151 83.18 88.17 89.22 0.72 5 284.11 323.68 331.95 5.61
1 1/4 113.90 123.68 125.73 1.41 6 295.09 345.76 356.36 7.301 1/2 187.91 201.51 204.36 1.96 8 377.38 441.94 455.44 9.25
10 511.92 609.11 629.43 13.812 626.65 737.72 760.95 15.514 1,536.78 1,717.27 1,755.01 25.416 1,682.56 1,897.76 1,942.75 30.8
REDUCING ROD COUPLING 18 2,057.80 2,321.58 2,376.74 37.620 2,113.08 2,640.65 2,750.96 75.4
Electro- Wt. 24 2,584.24 3,368.66 3,532.67 113Rod Size Plain Paint Galv. Each 30 3,051.61 4,009.57 4,209.87 137
3/8" x 1/2" $12.24 $13.08 $13.25 0.12 36 3,183.75 4,648.47 4,954.73 2101/2" x 5/8" 17.04 18.15 18.38 0.16 *** Made Special to Customer Order5/8" x 3/4" 30.42 31.81 32.10 0.203/4" x 7/8" 51.75 53.90 54.35 0.31
SPECIAL FLOOR SUPPORT
ROD COUPLING w/ SIGHT HOLEPlain Paint Galv.
Wt.Rod Size Plain Each
3/8" P.O.A. 0.081/2 P.O.A. 0.125/8 P.O.A. 0.173/4 P.O.A. 0.287/8 P.O.A. 0.441 P.O.A. 0.72
FIGURE 125SP & 136SP
FIGURE 123R
FIGURE 125
Price Upon Application - Made to Order
FIGURE 124FIGURE 114
FIGURE 123
FIGURE 123W
Page 28 Box quantities are shown on Page 52
EXTENSION RISER CLAMP PLASTIC PIPE RISER CLAMP
Wt. Wt.Pipe Size Plain Paint Galv. Each Pipe Size PVC Each
1/2" $17.55 $24.36 $26.57 1.00 1 1/2" $36.30 0.623/4 18.17 24.49 33.19 1.08 2 38.51 0.671 18.81 25.12 34.84 1.08 3 42.56 0.88
1 1/4 23.22 30.67 42.28 1.16 4 53.07 1.011 1/2 24.99 32.31 44.55 1.22
2 25.87 33.57 46.70 1.302 1/2 28.15 37.49 49.35 1.74
3 31.30 40.64 53.64 1.98 EXTENSION RISER CLAMP3 1/2 38.12 51.12 60.33 2.14
4 39.00 54.02 73.20 2.28 Type Wt.5 52.88 79.89 91.25 3.60 Pipe Size 316 Each6 65.38 88.73 112.08 3.68 1/2" $329.97 1.008 111.83 154.74 195.76 7.26 3/4 334.83 1.1010 152.59 218.98 253.31 11.0 1 349.66 1.1012 216.46 279.44 336.11 15.9 1 1/4 379.96 1.2014 307.84 403.38 512.18 17.4 1 1/2 393.37 1.2016 709.70 860.53 1,169.75 29.7 2 424.72 1.3018 781.39 936.00 1,338.50 31.6 2 1/2 505.07 1.8020 904.58 1,059.44 1,478.98 34.8 3 518.41 2.0024 1,426.85 1,744.91 2,145.89 50.0 4 593.19 2.30
5 880.96 3.606 903.83 3.708 1,799.11 7.30
PLASTIC PIPE RISER CLAMP 10 2,809.52 11.012 5,750.07 16.0
Electro- Wt.Pipe Size Plain Galv. Each
1 1/2" $14.12 $19.33 0.622 14.84 20.47 0.673 17.32 24.70 0.88 ANCHOR CHAIR4 18.36 26.84 1.01
Wt.Pipe Size Plain Paint Galv. Each
4" $657.30 $701.03 $710.18 6.285 702.68 754.05 764.79 7.32
PVC COATED RISER CLAMP 6 806.89 883.25 899.21 10.68 1,108.25 1,219.32 1,242.54 15.3
Wt. 10 1,402.10 1,554.82 1,586.75 21.3Pipe Size PVC Each 12 1,954.50 2,134.99 2,172.73 25.5
1/2" $50.51 1.30 14 2,378.89 2,601.02 2,647.47 31.53/4 50.94 1.36 16 2,809.15 3,086.82 3,144.88 40.01 52.10 1.38 18 3,065.14 3,412.23 3,484.80 49.5
1 1/4 58.27 1.95 20 3,312.28 3,770.43 3,866.23 69.91 1/2 59.16 2.01 24 4,303.27 4,865.56 4,983.13 81.0
2 61.10 2.172 1/2 77.43 2.29
3 82.66 2.504 107.82 3.42
FIGURE 126PVC
FIGURE 126
FIGURE 126LD
FIGURE 126LD PVC
FIGURE 126SS
FIGURE 127
Box quantities are shown on Page 59 Page 29
TURNBUCKLE MACHINE THREAD ROD***
Wt. Wt.Rod Size Plain Paint Galv. Each Rod Size Plain Paint Galv. Each
3/8" $60.58 $62.67 $63.10 0.30 5/8" x 24" $88.21 $102.79 $105.84 2.101/2 75.22 79.39 80.26 0.60 x 30 105.07 123.12 126.90 2.605/8 78.51 85.45 86.90 1.00 x 36 112.67 134.89 139.53 3.203/4 105.26 113.59 115.33 1.20 x 42 141.01 166.69 172.06 3.707/8 144.64 157.83 160.59 1.90 x 48 158.84 188.00 194.09 4.201 215.95 233.31 236.94 2.50 x 54 176.60 209.23 216.05 4.70
1 1/4 311.37 350.94 359.22 3.80 x 60 194.08 230.18 237.72 5.201 1/2 355.16 381.55 387.06 5.70 x 66 212.01 252.28 260.70 5.801 3/4 664.01 720.94 732.84 8.20 x 72 229.85 273.58 282.73 6.30
2 1,053.89 1,152.46 1,173.07 14.2 3/4" x 8" $57.57 $64.51 $65.96 1.002 1/4 2,145.26 2,332.69 2,371.88 27.0 x 10 66.75 75.78 77.67 1.302 1/2 2,387.85 2,616.93 2,664.82 33.0 x 12 76.28 86.70 88.87 1.50
x 14 85.38 97.88 100.49 1.80 x 18 108.61 124.57 127.91 2.30 x 24 131.74 152.57 156.92 3.00
MACHINE THREAD ROD*** x 30 159.47 185.85 191.37 3.80 x 36 187.36 218.60 225.13 4.50
Wt. x 42 215.01 251.80 259.49 5.30Rod Size Plain Paint Galv. Each x 48 242.91 284.56 293.27 6.00
3/8" x 8" $17.48 $19.22 $19.58 0.25 x 54 271.08 318.29 328.16 6.80 x 10 20.41 22.63 23.09 0.32 x 60 299.33 351.39 362.28 7.50 x 12 23.14 25.77 26.32 0.38 x 66 326.36 383.98 396.03 8.30 x 14 29.41 32.46 33.10 0.44 x 72 354.26 416.73 429.80 9.00 x 18 30.73 34.69 35.52 0.57 7/8" x 8" $73.01 $82.73 $84.77 1.40 x 24 38.41 43.68 44.79 0.76 x 10 84.59 96.39 98.86 1.70 x 30 45.83 52.35 53.72 0.94 x 12 96.52 111.09 114.14 2.10 x 36 53.69 62.02 63.76 1.20 x 14 108.17 124.83 128.31 2.40 x 42 61.19 70.91 72.94 1.40 x 18 131.74 153.26 157.76 3.10 x 48 68.52 78.93 81.11 1.50 x 24 167.32 195.78 201.73 4.10 x 54 76.47 88.27 90.74 1.70 x 30 202.83 238.23 245.63 5.10 x 60 83.88 97.07 99.83 1.90 x 36 238.42 281.46 290.46 6.20 x 66 91.48 106.06 109.11 2.10 x 42 273.63 323.61 334.06 7.20 x 72 98.99 114.96 118.29 2.30 x 48 309.05 365.97 377.87 8.20
1/2" x 8" $28.52 $31.58 $32.22 0.44 x 54 343.83 407.70 421.05 9.20 x 10 32.32 36.21 37.02 0.56 x 60 379.25 455.61 471.57 11.0 x 12 36.64 41.29 42.26 0.67 x 66 414.30 497.60 515.02 12.0 x 14 40.72 46.13 47.26 0.78 x 72 450.16 540.40 559.27 13.0 x 18 49.19 56.13 57.58 1.00 1" x 8" $107.02 $119.51 $122.12 1.80 x 24 61.81 71.53 73.56 1.40 x 10 121.68 137.65 140.99 2.30 x 30 74.52 86.32 88.79 1.70 x 12 136.69 155.43 159.35 2.70 x 36 88.21 102.09 105.00 2.00 x 14 152.49 174.71 179.35 3.20 x 42 99.61 116.27 119.75 2.40 x 18 180.66 208.43 214.24 4.00 x 48 112.67 130.03 133.65 2.50 x 24 227.82 265.30 273.14 5.40 x 54 125.04 146.56 151.06 3.10 x 30 273.63 320.14 329.87 6.70 x 60 135.81 159.41 164.34 3.40 x 36 319.11 375.34 387.09 8.10 x 66 150.65 176.33 181.70 3.70 x 42 363.96 429.22 442.86 9.40 x 72 170.25 198.71 204.66 4.10 x 48 409.62 485.98 501.94 11.0
5/8" x 8" $40.72 $45.51 $46.51 0.69 x 54 455.46 545.70 564.57 13.0 x 10 46.54 52.57 53.84 0.87 x 60 501.37 598.56 618.88 14.0 x 12 52.19 59.83 61.42 1.10 x 66 546.39 650.52 672.29 15.0 x 14 58.18 67.21 69.10 1.30 x 72 591.34 709.35 734.02 17.0 x 18 70.82 81.93 84.25 1.60 *** Made Special to Customer Order
FIGURE 133
FIGURE 132 FIGURE 133
Page 30 Box quantities are shown on Page 52
ADJUSTABLE PIPE SUPPORT
Add to Figure 133, 72 inch lengths for Wt.each additional foot of rod or fraction thereof. Pipe Size Plain Galv. Each
Wt. 1" $130.90 $136.77 0.70Rod Size Plain Paint Galv. Each 1 1/2 132.49 138.70 0.74
3/8" $20.75 $23.01 $23.57 0.38 2 191.09 197.80 0.801/2 35.23 39.21 40.20 0.67 2 1/2 195.51 202.56 0.845/8 42.74 48.92 50.46 1.04 3 195.51 204.07 1.023/4 61.72 70.63 72.86 1.50 3 1/2 235.64 251.10 1.067/8 79.82 89.92 92.44 1.70 4 235.64 251.25 1.861 94.82 110.69 114.66 2.67 5 241.57 262.56 2.50
6 267.95 292.96 2.988 289.79 317.32 3.2810 374.73 427.61 6.30
Add to Figure 133 prices for each additional 12 405.90 464.66 7.002-1/2" of thread length or fraction thereof 14 P.O.A P.O.A. 18.5on each end. 16" P.O.A. P.O.A. 21.2
Wt. 18 P.O.A. P.O.A. 30.2Rod Size Plain Each 20 P.O.A. P.O.A. 33.2
3/8" $24.11 - 24 P.O.A. P.O.A. 45.61/2 26.67 - 30 P.O.A. P.O.A. 80.25/8 27.99 - 36 P.O.A. P.O.A. 92.83/4 29.32 -7/8 29.93 -1 30.73 -
THREADED BASE STAND
LEFT HAND THREADS:Add 25% to the prices for a Figure 133 of Plain Paint Galv.applicable size and length.
PIPE SUPPORT HEAVY WELDED STEEL BRACKET***
Wt. Wt.Pipe Size Plain Paint Galv. Each Size Plain Paint Galv. Each
2" $136.10 $147.20 $149.53 1.57 NO. 0 $1,115.23 $1,295.71 $1,333.45 25.13 139.28 152.47 155.22 1.85 NO. 1 1,271.36 1,583.74 1,649.05 44.84 172.53 191.28 195.20 2.70 NO. 2 1,500.31 1,923.76 2,012.30 60.75 191.72 213.93 218.58 3.14 NO. 3 1,713.23 2,400.47 2,544.16 98.16 212.29 246.31 253.42 4.90 NO. 4 2,615.16 3,517.59 3,706.28 1298 267.57 307.84 316.25 5.75 NO. 5 2,912.01 4,147.65 4,406.01 17710 314.78 383.50 397.87 9.88 *** Made Special to Customer Order12 410.20 493.50 510.92 11.414 872.90 987.44 1,011.39 16.516 938.02 1,067.84 1,094.98 18.718 1,500.69 1,695.06 1,735.70 28.020 1,600.90 1,810.54 1,854.38 30.224 1,930.70 2,219.48 2,279.86 41.630 2,052.87 2,581.84 2,692.44 76.236 2,179.59 2,796.02 2,924.91 88.8
FIGURE 139FIGURE 136
FIGURE 138
FIGURE 133ADDITIONAL ROD LENGTHS:
ADDITIONAL THREAD LENGTHS:
FIGURE 137
Price Upon Application - Made to Order
FIGURE 133L
Box quantities are shown on Page 52 Page 31
HARVARD ROLL HANGER METAL DECK CEILING BOLT
Wt. Wt.Pipe Size Plain Paint Galv. Each Size Plain Paint Galv. Each
2" $65.00 $76.11 $78.43 1.60 No. 1 (38/") $56.68 $60.15 $60.88 0.502 1/2 68.36 78.88 81.79 2.00 No. 2 (1/2") 64.55 70.65 71.93 0.88
3 72.45 88.41 91.75 2.30 No. 3 (5/8") 81.96 91.68 93.71 1.403 1/2 96.43 113.78 117.41 2.50 No. 4 (3/4") 102.31 115.50 118.26 1.90
4 109.02 124.19 130.00 4.00 No. 5 (7/8") 127.79 145.15 148.77 2.505 112.58 149.37 157.07 5.30 No. 6 ( 1" ) 137.08 162.77 168.14 3.706 148.68 197.27 207.43 7.007 175.50 240.75 254.40 9.408 209.01 299.25 318.12 12.310 265.18 404.01 433.04 19.312 389.75 556.35 591.19 23.1 PIPE CHAIR14 974.37 1,224.28 1,276.53 35.516 1,198.66 1,524.92 1,593.14 46.5 Wt.18 1,375.61 1,778.23 1,862.42 57.0 Pipe Size Plain Paint Galv. Each20 1,925.52 2,453.10 2,563.41 75.9 3" $118.05 $137.49 $141.55 2.7524 2,632.83 3,465.84 3,640.02 119 4 169.97 206.76 214.46 5.25
5 245.92 300.76 312.22 7.906 323.35 392.77 407.28 10.08 623.22 741.23 765.91 16.310 841.50 1,021.98 1,059.72 25.8
ADJUSTABLE ROLL 12 1,057.65 1,293.67 1,343.02 33.3SUPPORT
Wt.Pipe Size Plain Paint Galv. Each
1" $58.56 $61.69 $62.34 0.45 STEEL BRACKET1 1/4 60.71 64.04 64.74 0.481 1/2 62.73 66.27 67.01 0.51 Wt. 2 64.87 68.83 69.66 0.57 Size Plain Paint Galv. Each
2 1/2 69.67 80.08 82.26 1.48 NO. 1 $586.14 $718.03 $745.61 19.03 73.58 84.00 86.17 1.48 NO. 2 973.68 1,188.87 1,233.87 31.0
3 1/2 81.66 93.46 95.93 1.70 NO. 3 1,465.42 1,784.74 1,851.51 46.04 87.85 100.34 102.95 1.78 NO. 4 2,036.72 2,480.99 2,573.89 64.05 103.75 121.10 124.73 2.42 NO. 5 3,004.83 3,983.62 4,188.28 1416 149.56 177.33 183.14 3.967 175.50 217.15 225.86 5.998 208.76 253.88 263.31 6.4310 246.62 305.63 317.97 8.45 CEILING STIRRUP12 380.66 457.02 472.99 10.214 591.19 736.96 767.45 20.9 Wt.16 803.10 990.53 1,029.72 26.1 Size Plain Paint Galv. Each18 863.05 1,119.90 1,173.60 36.6 NO. 1 $65.78 $71.06 $72.16 0.7620 1,182.37 1,453.10 1,509.71 39.0 NO. 2 90.24 99.68 101.66 1.3624 1,868.48 2,333.57 2,430.82 66.930 3,689.24 4,619.44 4,813.94 134
RETURN LINE ANGLE
Wt.Size Plain Paint Galv. Each
NO. 1 $17.32 $21.00 $21.77 0.53NO. 2 23.31 28.24 29.27 0.71NO. 3 32.84 39.23 40.56 0.92NO. 4 37.79 46.81 48.70 1.23
FIGURE 145
FIGURE 150
FIGURE 151
FIGURE 152
FIGURE 140 FIGURE 143
FIGURE 142
Page 32 Box quantities are shown on Page 52
SIDE BEAM CONNECTOR DOUBLE BOLT DUCTILE IRONPIPE CLAMP
Wt. Wt.Rod Size Plain Paint Galv. Each Pipe Size Plain Paint Galv. Each
No. 1 (3/8") $3.62 $4.52 $4.71 0.13 3" $177.16 $243.73 $257.65 9.50No. 2 (1/2") 8.22 9.95 10.31 0.25 4 182.45 297.48 314.74 10.0
6 191.88 299.50 318.58 12.08 476.75 606.34 636.25 21.010 504.65 654.21 688.40 24.0
STEEL SIDE BEAM CONNECTOR 12 670.15 896.85 948.13 36.014 1,089.83 1,548.09 1,625.64 48.6
Wt. 16 1,473.18 2,034.65 2,143.18 71.8Rod Size Plain Paint Galv. Each 18 1,935.92 2,468.10 2,590.61 85.3
NO. 1 (3/8") $11.92 $13.04 $13.28 0.15 20 2,341.45 3,386.02 3,552.83 10224 3,236.34 4,637.61 4,859.44 137
EXTENSION PIECE FLANGE BOLT w/ HEAVY HEX NUT
Wt. Electro- Wt.Rod Size Plain Paint Galv. Each Size Plain Paint Galv. Each
3/8" $15.65 $17.04 $17.33 0.20 5/8" x 1 1/2" $4.51 $7.00 $7.53 0.361/2 23.22 26.00 26.58 0.40 x 1 3/4 4.59 7.09 7.62 0.365/8 28.90 31.96 32.60 0.44 x 2 4.86 7.36 7.88 0.363/4 42.41 46.92 47.86 0.65 x 2 1/4 4.95 7.59 8.14 0.387/8 57.05 62.46 63.60 0.78 x 2 1/2 5.64 8.42 9.00 0.40
x 2 3/4 5.83 8.75 9.36 0.42 x 3 6.01 9.06 9.70 0.44
x 3 1/4 6.97 10.16 10.83 0.46DUCTILE IRON PIPE CLAMP x 3 1/2 7.23 10.56 11.26 0.48
x 3 3/4 7.51 10.98 11.71 0.50Wt. x 4 8.22 11.83 12.58 0.52
Pipe Size Plain Paint Galv. Each 3/4" x 1 1/2" $7.51 $11.47 $12.29 0.57 3" $150.16 $211.48 $224.30 9.00 x 1 3/4 7.77 11.73 12.56 0.574 177.40 228.02 238.59 9.00 x 2 7.95 11.91 12.74 0.576 186.55 253.70 267.74 10.7 x 2 1/4 8.29 12.46 13.33 0.608 230.77 319.34 337.85 12.2 x 2 1/2 8.83 13.14 14.04 0.6210 250.26 352.47 373.84 14.6 x 2 3/4 9.37 13.88 14.82 0.6512 307.62 423.45 447.67 16.6 x 3 9.88 14.60 15.59 0.6814 1,059.58 1,317.13 1,370.99 41.9 x 3 1/4 10.32 15.25 16.28 0.7116 1,432.35 1,831.56 1,915.03 61.9 x 3 1/2 10.69 15.83 16.90 0.7418 1,727.83 2,174.59 2,268.00 65.1 x 3 3/4 11.75 17.10 18.21 0.7720 2,276.43 2,833.70 2,950.22 92.2 x 4 12.19 17.75 18.91 0.8024 3,146.47 3,883.65 4,037.79 123 7/8" x 2 3/4" $13.96 $20.83 $22.27 0.9930 6,654.93 7,944.27 8,213.86 184 x 3 14.57 21.44 22.87 0.99
x 3 1/4 15.89 23.53 25.12 1.10 x 3 1/2 16.87 24.51 26.11 1.10
x 4 17.66 25.99 27.73 1.20 x 4 1/2 19.25 27.58 29.32 1.20
1" x 3" $22.35 $32.77 $34.94 1.50 x 3 1/4 22.52 32.93 35.11 1.50 x 3 1/2 23.58 34.68 37.01 1.60
x 4 26.32 37.42 39.74 1.60 x 4 1/2 29.75 41.55 44.02 1.70
x 5 31.69 43.49 45.96 1.70
FIGURE 153
FIGURE 153S
FIGURE 157
FIGURE 158
FIGURE 162
FIGURE 158DB
Box quantities are shown on Page 52 Page 33
FINISHED HEX NUT MALLEABLE ROD COUPLING
Electro- Wt. Electro- Wt.Rod Size Plain Galv. Each Rod Size Plain Paint Galv. Each
3/8" $0.30 $0.43 0.03 1/4" $7.19 $7.61 $7.70 0.101/2 0.75 0.93 0.07 3/8 7.32 8.01 8.16 0.105/8 1.20 1.50 0.12 1/2 9.72 11.11 11.40 0.183/4 1.65 1.84 0.19 5/8 11.23 13.52 14.00 0.307/8 2.70 3.02 0.30 3/4 15.40 18.45 19.09 0.441 4.20 4.50 0.43 7/8 25.75 32.27 33.64 0.96
1 1/4 10.62 10.80 0.79 1 34.58 41.25 42.64 0.941 1/2 17.10 22.50 1.31
REDUCING ROD COUPLINGHEAVY HEX NUT
Wt.Electro- Wt. Rod Size Plain Paint Galv. Each
Rod Size Plain Paint Galv. Each 1/4" x 3/8" $14.01 $14.70 $14.85 0.10 3/8" $0.32 $0.42 $0.46 0.03 3/8" x 1/2" 17.67 19.13 19.43 0.181/2 0.78 0.99 1.05 0.07 1/2" x 5/8" 20.83 23.25 23.76 0.355/8 1.24 1.85 1.95 0.12 5/8" x 3/4" 25.24 28.57 29.27 0.443/4 2.09 2.28 2.34 0.19 3/4" x 7/8" 41.56 49.20 50.79 0.967/8 3.35 3.68 3.85 0.301 4.61 5.07 5.42 0.43
1 1/4 11.51 12.98 13.50 0.791 1/2 25.50 27.66 28.50 1.31 TWO BOLT PIPE CLAMP
Wt.Pipe Size Plain Paint Galv. Each
STAINLESS HEX NUT 1/2" $13.50 $15.66 $18.05 0.313/4 13.50 15.93 18.68 0.35
Type Type Wt. 1 13.63 16.34 20.45 0.39Rod Size 304 316 Each 1 1/4 17.92 20.70 22.09 0.40
3/8" $1.37 $2.25 0.03 1 1/2 17.92 21.05 30.29 0.451/2 3.15 4.64 0.07 2 20.83 29.85 34.46 1.235/8 5.40 9.75 0.12 2 1/2 22.21 31.93 37.23 1.333/4 8.70 14.25 0.19 3 24.74 35.84 41.27 1.537/8 14.70 26.59 0.30 4 35.09 50.36 60.58 2.201 24.60 36.75 0.43 5 67.40 84.06 99.96 2.39
1 1/4 P.O.A. P.O.A. 0.79 6 85.57 126.53 147.92 5.871 3/8 P.O.A. P.O.A. 1.02 8 101.98 150.57 179.60 6.951 1/2 P.O.A. P.O.A. 1.31 10 183.64 287.77 353.90 14.4
12 236.02 354.03 429.51 16.714 454.12 567.59 606.84 21.316 490.47 657.07 814.97 23.4
STEEL DRIVE SCREW 18 893.72 1,122.80 1,358.57 33.020 1,075.60 1,332.44 1,558.62 36.7
Electro- Wt. 24 1,471.53 1,839.45 2,240.05 53.0Rod Size Plain Paint Galv. Each 30 3,088.08 3,810.03 4,113.57 104
No. 12 (1 1/2") $1.50 $1.64 $1.67 0.02No. 16 ( 2" ) 2.11 2.39 2.44 0.03
SPECIAL TWO BOLTPIPE CLAMP
Plain Paint Galv.Price Upon Application - Made to Order
FIGURE 165
FIGURE 166
FIGURE 167
FIGURE 175
FIGURE 175SP
FIGURE 165H
FIGURE 165H SS
FIGURE 167R
Page 34 Box quantities are shown on Page 52
LOCK WASHER OFFSET PIPE CLAMP***
Wt. Wt.Rod Size Plain Paint Galv. Each Pipe Size Plain Paint Galv. Each
1/4" $1.86 $1.92 $1.94 0.01 2" $188.48 $207.91 $211.98 2.805/16 2.21 2.28 2.29 0.01 2 1/2 200.90 221.03 225.24 2.903/8 2.83 3.17 3.25 0.05 3 208.25 230.47 235.11 3.201/2 3.27 3.69 3.77 0.06 4 233.28 262.44 268.53 4.205/8 7.95 8.44 8.54 0.07 5 265.68 310.80 320.24 6.503/4 8.83 9.39 9.51 0.08 6 312.59 362.58 373.03 7.207/8 9.10 9.72 9.86 0.09 8 342.89 400.50 412.55 8.301 9.28 9.97 10.12 0.10 10 504.86 590.93 608.93 12.4
1 1/4 9.88 11.06 11.31 0.17 12 769.06 915.53 946.16 21.11 1/2 18.20 20.14 20.55 0.28 *** Made Special To Customer Order
ANCHOR BOLT*** TOP BEAM CLAMP w/ LOCKING NUT
Wt. Wt.Size Plain Paint Galv. Each Rod Size Plain Paint Galv. Each
3/8" x 6" $19.78 $21.72 $22.13 0.28 3/8" $7.45 $9.74 $10.22 0.33 x 8 19.97 22.33 22.82 0.34 1/2 12.75 15.11 15.60 0.34
x 10 21.10 23.88 24.46 0.40 5/8 30.82 33.53 34.09 0.39 x 12 23.58 26.77 27.44 0.46 3/4 39.24 43.61 44.53 0.63
1/2" x 6" $24.62 $28.23 $28.99 0.52 7/8 88.55 92.72 93.59 0.60 x 8 25.95 30.32 31.24 0.63
x 10 27.82 32.95 34.03 0.74 x 12 30.19 35.81 36.99 0.81
5/8" x 6" $36.82 $42.72 $43.95 0.81 WIDE MOUTH TOP x 8 40.09 46.96 48.39 0.99 BEAM CLAMP w/ LN
x 10 43.44 51.77 53.51 1.16 Wt. x 12 54.47 64.19 66.22 1.34 Rod Size Plain Paint Galv. Each
3/4" x 6" $53.25 $61.58 $63.32 1.19 3/8" $14.89 $17.46 $18.00 0.37 x 8 58.37 68.79 70.96 1.44 1/2 18.30 20.73 21.24 0.35
x 10 63.75 75.55 78.02 1.69 5/8 35.47 38.87 39.58 0.49 x 12 68.61 82.49 85.40 1.94 3/4 47.46 53.50 54.76 0.87
7/8" x 6" $58.82 $69.23 $71.41 1.50 x 8 74.00 87.19 89.95 1.90
x 10 86.00 101.27 104.47 2.20 x 12 101.10 119.15 122.92 2.60 TOP BEAM CLAMP
1" x 6" $77.87 $91.76 $94.66 2.00 RETAINING CLIP x 8 93.34 110.00 113.48 2.40 Rod Size 6" 8" 10" 14"
x 10 112.85 132.98 137.19 2.90 3/8" $6.18 $7.07 $8.20 $11.16 x 12 128.47 151.38 156.17 3.30 1/2 6.18 7.07 8.20 11.16
*** Made Special To Customer Order 5/8 6.18 7.07 8.20 11.163/4 6.18 7.07 8.20 11.167/8 6.75 7.90 9.28 13.19
OFFSET PIPE CLAMP***
Wt. TOP BEAM CLAMP w/ LNPipe Size Plain Paint Galv. Each
3/4" $158.18 $167.21 $169.10 1.30 Type1 159.66 169.38 171.41 1.40 Rod Size 316
1 1/4 162.82 173.23 175.41 1.50 3/8" $154.341 1/2 166.19 177.29 179.62 1.60 1/2 159.21
FIGURE 192SS
FIGURE 176
FIGURE 177
FIGURE 179
FIGURE 179
FIGURE 192
FIGURE 192W
FIGURE 192RS
12"$8.528.528.528.52
11.20
Box quantities are shown on Page 52 Page 35
STEEL TOP BEAM CLAMP VEE TROUGHw/ LN
Electro- Pre- Wt.Rod Size Plain Galv. Size Galv. Each
3/8" $26.49 $29.26 No 1: 1 1/2"x 1 1/2" $248.57 5.391/2 29.31 32.16 No 2: 3" x 3" 567.23 10.8
WELDING CLEVIS ATTACHMENTSTEEL TOP BEAM CLAMPw/ LN Wt.
Type Rod Size Plain Paint Galv. EachRod Size 304 1/2" $233.11 $246.99 $249.89 1.70
3/8" $99.51 5/8 233.28 264.52 271.05 1.601/2 121.50 3/4 365.73 403.91 411.89 4.00
7/8 369.97 408.15 416.13 4.401 670.54 727.81 739.78 6.70
1 1/4 797.88 862.09 875.51 9.20C-CLAMP w/ LOCKING NUT 1 1/2 1,542.77 1,643.42 1,664.47 14.9
1 3/4 1,989.83 2,111.31 2,136.71 19.2Wt. 2 3,048.54 3,270.68 3,317.12 30.5
Rod Size Plain Paint Galv. Each 2 1/4 4,621.86 4,996.72 5,075.10 42.7 3/8" $12.91 $14.86 $15.26 0.33 2 1/2 5,152.28 5,554.90 5,639.09 51.51/2 16.12 18.27 18.72 0.395/8 24.69 27.60 28.21 0.463/4 33.38 37.20 38.00 0.52
ADJUSTABLE SIDEBEAM CLAMP
Wt.Size Plain Each
LIGHT DUTY CLEVIS HANGER Type 13" $47.08 0.80
Electro- Wt. 4 5/8 48.97 1.06Pipe Size Plain Paint Galv. Each 6 1/8 51.62 1.17
1/2" $5.17 $6.08 $6.27 0.27 7 5/8 60.46 1.283/4 5.81 7.33 7.65 0.29 Type 2 1 6.44 8.10 8.45 0.33 3" $64.12 1.57
1 1/4 6.56 8.58 9.00 0.36 4 5/8 66.39 1.841 1/2 6.82 8.90 9.33 0.42 6 1/8 67.90 2.05
2 7.45 9.88 10.38 0.52 7 5/8 70.18 2.232 1/2 12.50 18.19 19.38 0.81 Type 3
3 13.76 18.62 19.63 0.90 3" $89.36 3.753 1/2 14.77 20.67 21.90 0.99 4 5/8 93.40 4.19
4 17.54 24.49 25.94 1.40 6 1/8 96.55 4.537 5/8 100.21 5.11
VEE CLEVIS HANGER WELDING LUG
Electro- Wt. Wt.Size Plain Paint Galv. Each Rod Size Plain Paint Galv. Each
No 1: 1/2" to 2" $19.78 $22.42 $22.97 0.38 1/2" $17.29 $18.04 $20.74 0.75No 2: 2 1/2" to 4" 43.44 51.43 53.10 1.15 5/8 17.29 20.62 21.32 0.68
3/4 19.31 23.48 24.35 1.007/8 24.74 29.67 30.70 0.981 57.55 65.88 67.63 1.60
1 1/4 115.49 136.31 140.67 3.701 1/2 222.14 255.45 262.43 6.401 3/4 235.39 268.01 274.84 6.30
2 371.57 400.73 406.83 7.20
FIGURE 200VT
FIGURE 216
FIGURE 192STP
FIGURE 217
FIGURE 220
FIGURE 192STPSS
FIGURE 196
FIGURE 200
FIGURE 200V
Page 36 Box quantities are shown on Page 52
WALL PIPE SUPPORT RETURN LINE OFFSET HOOK
Wt. Wt.Pipe Size Plain Paint Galv. Each Pipe Size Plain Paint Galv. Each
3" $310.37 $327.03 $330.52 2.39 1/2" $23.84 $27.52 $28.29 0.534 385.08 403.13 406.90 2.56 3/4 24.02 27.84 28.63 0.555 479.90 508.37 514.32 4.05 1 27.02 32.65 33.82 0.816 623.50 654.74 661.27 4.48 1 1/4 27.20 33.03 34.25 0.848 1,054.20 1,165.27 1,188.50 15.3 1 1/2 31.00 38.63 40.23 0.8910 1,252.08 1,418.69 1,453.52 23.4 2 31.79 40.12 41.87 0.9612 1,534.11 1,721.54 1,760.73 26.9 2 1/2 35.15 44.17 46.06 1.26
3 37.44 47.15 49.19 1.384 54.40 71.06 74.54 2.395 65.16 92.24 97.90 3.906 84.68 114.53 120.77 4.25
SHORT U-BOLT
Wt.Pipe Size Plain Paint Galv. Each
1/2" $9.18 $9.73 $9.85 0.08 RETURN LINE HOOK3/4 9.28 9.90 10.03 0.091 10.06 10.75 10.90 0.10 Wt.
1 1/4 11.13 13.01 13.40 0.27 Pipe Size Plain Paint Galv. Each1 1/2 11.57 13.66 14.09 0.30 1/2" $23.84 $27.31 $28.04 0.51
2 11.91 14.27 14.77 0.34 3/4 24.02 27.91 28.72 0.532 1/2 16.43 21.43 22.48 0.72 1 27.02 32.71 33.90 0.80
3 18.01 23.56 24.73 0.80 1 1/4 27.20 33.03 34.25 0.833 1/2 18.36 24.61 25.92 0.95 1 1/2 31.00 38.63 40.23 0.87
4 18.81 25.40 26.78 0.95 2 31.79 40.12 41.87 0.935 26.49 34.82 36.56 1.13 2 1/2 35.15 44.87 46.90 1.166 34.78 43.81 45.70 1.24 3 37.44 47.15 49.19 1.278 41.68 56.25 59.30 2.10 4 54.40 65.51 67.83 2.1910 72.85 91.59 95.51 2.68 5 65.16 89.46 94.54 3.5012 93.25 115.46 120.11 3.20 6 84.68 113.83 119.93 4.15
ROUND HANGER ROD ONE HOLE PIPE CLAMP
Wt. Wt.Rod Size Plain Paint Galv. Each Pipe Size Plain Each
1/4" $4.24 $5.42 $5.67 0.17 1/2" $4.54 0.053/8 6.53 9.16 9.71 0.38 3/4 5.55 0.061/2 12.90 17.55 18.52 0.67 1 7.70 0.095/8 17.48 25.12 26.71 1.10 1 1/4 9.21 0.123/4 23.14 33.55 35.72 1.50 1 1/2 10.22 0.167/8 31.25 45.83 48.88 2.10 2 14.89 0.241 40.97 55.55 58.59 2.10 2 1/2 29.16 0.50
1 1/8 51.56 75.16 80.10 3.40 3 41.52 0.691 1/4 60.14 89.30 95.39 4.20 4 56.04 1.401 1/2 91.48 133.82 142.68 6.10
FIGURE 221
FIGURE 222
FIGURE 224
FIGURE 227
FIGURE 237
FIGURE 227S
Box quantities are shown on Page 52 Page 37
C-CLAMP w/o LOCKING NUT WASHER PLATE
Wt. Wt.Rod Size Plain Paint Galv. Each Rod Size Plain Paint Galv. Each
3/8" $8.56 $11.06 $11.58 0.36 3/8" $14.26 $18.50 $19.38 0.631/2 9.28 11.78 12.30 0.36 7/8 14.26 18.64 19.55 0.615/8 19.25 23.62 24.54 0.63 1/2 16.41 23.00 24.38 0.613/4 29.14 34.14 35.19 0.72 5/8 33.95 45.75 48.22 0.957/8 103.04 114.50 116.89 1.65 3/4 45.06 60.12 63.27 1.60
1 46.70 61.62 64.74 2.151 1/8 69.54 84.33 87.42 2.131 1/4 81.16 103.92 108.69 3.28
ADJUSTABLE SPLIT 1 1/2 104.13 132.24 138.12 4.05SWIVEL HANGER
Wt.Pipe Size Plain Galv. Each
3/4 $52.76 $54.69 0.23 INSULATION SHIELD1 56.04 58.14 0.25
1 1/4 58.82 61.33 0.30 Inside Shield Pre- Wt.1 1/2 66.01 68.70 0.32 Diameter Size Length Galv. Each
2 74.97 77.82 0.34 2 3/8" 1A 12" $24.36 0.622 1/2 114.10 119.55 0.65 2 7/8 2A 12 28.02 0.76
3 131.52 138.06 0.78 3 1/2 3A 12 30.17 0.923 1/2 166.10 173.23 0.85 4 4A 12 32.84 1.04
4 200.93 213.86 1.54 4 1/2 5A 12 37.80 1.165 257.22 274.01 2.00 5 6A 12 47.07 1.326 372.58 399.44 3.20 5 5/8 7A 12 51.22 1.468 485.04 527.01 5.00 6 5/8 8A 12 65.17 2.30
7 5/8 9A 12 70.58 2.708 5/8 10A 12 79.15 3.00
9 5/8" 11B 18" $107.02 5.10PIPE SUPPORT*** 10 3/4 12B 18 114.44 5.60
11 3/4" 13C 24" $120.26 10.0Wt. 12 3/4 14C 24 129.16 11.0
Pipe Size Plain Paint Galv. Each 14 15C 24 139.87 12.0 2" $337.91 $347.28 $349.24 1.35 15 16C 24 177.84 13.03 386.40 403.76 407.39 2.45 16 17C 24 203.46 14.04 460.48 486.16 491.53 3.63 17 18C 24 203.46 15.05 573.59 603.44 609.68 4.30 18 19C 24 392.40 17.06 580.75 630.04 640.34 7.03 19 20C 24 392.40 23.08 582.24 641.94 654.42 8.53 20 21C 24 417.39 24.010 659.15 756.34 776.66 13.0 21 22C 24 428.88 25.012 672.23 783.30 806.52 15.1 22 23C 24 463.71 26.0
*** Made Special To Customer Order 23 24C 24 494.00 28.024 25C 24 509.53 29.026 26C 24 560.39 31.027 27C 24 588.41 32.0
UNDERGROUND SOCKET 28 28C 24 617.82 34.0CLAMP WASHER
Wt.Rod Size Plain Paint Galv. Each
3/4" $21.46 $30.13 $31.95 1.251 1/4 53.26 73.05 77.18 2.851 1/2 79.26 128.27 138.52 7.06
FIGURE 260
FIGURE 258
FIGURE 265GS
FIGURE 238
FIGURE 240
FIGURE 247
Page 38 Box quantities are shown on Page 52
INSULATION PROTECTION BEAM CLAMP***SHIELD
Inside Wt. Wt.Diameter Galv. Each Size Plain Paint Galv. Each 2 3/8" $17.67 0.62 NO. 12 7/8 23.84 0.76 3" $131.74 $142.85 $145.17 1.603 1/2 28.97 0.92 4 148.18 160.67 163.28 1.80
4 32.84 1.04 5 156.38 169.57 172.33 1.904 1/2 37.80 1.16 6 164.68 178.57 181.47 2.00
5 47.07 1.32 7 172.89 187.47 190.51 2.105 5/8 51.22 1.46 8 189.31 205.27 208.61 2.306 5/8 54.31 1.58 NO. 27 5/8 58.82 1.74 3" $321.06 $348.14 $353.80 3.908 5/8 65.96 2.02 4 345.69 374.84 380.94 4.209 5/8 89.18 2.28 5 370.41 401.65 408.18 4.5010 3/4 95.37 2.54 6 395.14 428.46 435.43 4.8011 3/4 100.21 2.84 7 411.57 446.28 453.54 5.0012 3/4 107.64 4.18 8 436.30 473.09 480.78 5.30
14 116.56 4.58 NO. 315 124.23 4.90 4" $452.71 $490.88 $498.87 5.5016 137.57 5.20 5 493.94 535.59 544.30 6.0017 141.11 5.53 6 518.59 562.32 571.47 6.3018 150.02 6.20 7 535.10 580.22 589.65 6.5019 158.32 6.50 8 584.45 633.73 644.04 7.1020 166.54 7.25 10 642.11 696.26 707.58 7.8021 175.10 7.30 NO. 422 181.02 7.60 4" $609.17 $660.54 $671.28 7.4023 193.28 7.75 5 633.82 687.27 698.45 7.7024 200.26 8.00 6 666.75 722.98 734.74 8.10
7 688.29 749.37 762.09 8.408 691.48 749.78 761.99 8.809 749.13 812.30 825.51 9.1010 781.99 847.93 861.72 9.50
EXTENDED OFFSET 12 814.91 883.64 898.01 9.90PIPE CLAMP*** NO. 5
Wt. 4" $987.80 $1,071.10 $1,088.52 12.0Pipe Size Plain Paint Galv. Each 5 1,070.09 1,160.34 1,179.21 13.0
3/8" $82.29 $95.13 $97.82 1.85 6 1,070.09 1,160.34 1,179.21 13.01/2 82.29 95.13 97.82 1.85 7 1,152.49 1,249.67 1,269.99 14.03/4 84.18 97.37 100.13 1.85 8 1,152.49 1,249.67 1,269.99 14.01 114.60 131.26 134.75 2.34 9 1,234.78 1,338.91 1,360.68 15.0
1 1/4 115.74 132.40 135.88 2.40 10 1,317.08 1,428.15 1,451.37 16.01 1/2 117.51 134.86 138.49 2.45 12 1,399.37 1,517.38 1,542.06 17.0
2 120.91 143.13 147.77 3.13 NO. 62 1/2 122.43 152.28 158.52 4.21 4" $1,317.08 $1,428.15 $1,451.37 16.0
3 124.70 155.73 162.22 4.47 5 1,399.37 1,517.38 1,542.06 17.04 143.00 177.02 184.13 4.90 6 1,399.64 1,517.65 1,542.32 17.05 154.23 188.25 195.36 4.90 7 1,481.75 1,606.71 1,632.83 18.06 174.55 211.48 219.21 5.32 8 1,564.05 1,695.94 1,723.52 19.08 188.31 266.06 282.32 11.2 9 1,646.34 1,785.17 1,814.20 20.010 313.14 406.85 426.45 13.5 10 1,728.63 1,874.41 1,904.89 21.012 933.16 1,085.88 1,117.82 22.0 12 1,893.31 2,052.97 2,086.36 23.014 951.53 1,194.49 1,245.29 35.0 *** Made Special To Customer Order
*** Made Special To Customer Order
FIGURE 267
FIGURE 265P FIGURE 268
Box quantities are shown on Page 52 Page 39
FORGED STEEL CLEVIS w/o PIN RIGHT ANGLE BEAM CLAMP
Electro- Wt. Electro- Wt.Rod Size Plain Paint Galv. Each Pipe Size Galv. Each
3/8" $145.90 $151.25 $152.37 1.00 3/8" $42.21 0.331/2 145.90 151.25 152.37 0.90 1/2 48.02 0.415/8 145.90 151.25 152.37 0.90 3/4 49.01 0.423/4 243.72 261.07 264.70 3.00 1 50.07 0.477/8 243.72 261.07 277.29 3.40 1 1/4 55.19 0.541 432.41 460.18 465.98 5.10 1 1/2 62.25 0.57
1 1/4 622.67 662.64 671.01 5.50 2 90.77 0.851 1/2 631.70 673.35 682.06 8.50 2 1/2 104.81 1.061 3/4 830.24 885.77 897.38 12.9 3 113.91 1.10
2 1,497.03 1,608.10 1,631.32 23.3 3 1/2 146.75 1.282 1/4 2,084.55 2,265.04 2,302.78 35.1 4 159.65 1.402 1/2 2,376.74 2,557.23 2,594.96 36.0
STANDARD U-BOLTFORGED STEEL CLEVIS w/ PIN
Electro- Wt.Hot-Dip Wt. Pipe Size Plain Paint Galv. Each
Rod Size Plain Paint Galv. Each 1/2" $7.45 $8.21 $8.37 0.11 3/8" $198.91 $208.64 $223.27 1.20 3/4 7.53 8.28 8.45 0.121/2 198.91 208.64 223.27 1.30 1 7.70 8.53 8.71 0.125/8 198.91 208.64 223.27 1.40 1 1/4 9.21 11.16 11.56 0.283/4 319.20 340.72 360.22 3.10 1 1/2 9.84 11.93 12.36 0.307/8 434.11 479.85 489.89 4.90 2 10.73 13.02 13.50 0.331 507.00 543.79 563.29 5.30 2 1/2 17.80 22.66 23.67 0.70
1 1/4 689.52 717.84 739.56 6.20 3 18.68 24.09 25.23 0.781 1/2 829.86 896.50 914.67 9.60 3 1/2 19.69 25.52 26.74 0.841 3/4 1,302.53 1,394.16 1,413.32 13.2 4 20.07 26.32 27.62 0.90
2 1,970.71 2,140.09 2,175.50 24.4 5 20.19 27.83 29.43 1.042 1/4 3,103.35 3,360.20 3,413.90 37.0 6 41.52 55.41 58.31 2.002 1/2 3,198.77 3,473.67 3,531.15 39.6 8 49.22 65.19 68.53 2.30
10 87.47 121.48 128.59 4.9012 120.66 174.11 185.29 7.7014 173.04 230.66 242.70 8.30 16 200.55 264.42 277.77 9.20
FORGED WELDLESS EYENUT 18 274.89 368.61 388.20 13.520 290.04 391.39 412.58 14.6
Wt. 24 348.22 465.54 490.07 16.9Rod Size Plain Paint Galv. Each 30 622.49 755.08 782.80 19.1
1/4" $48.84 $53.22 $54.13 0.63 36 982.45 1,143.50 1,177.17 23.23/8 48.84 53.22 54.13 0.631/2 48.84 53.22 54.13 0.635/8 48.84 53.22 54.13 0.623/4 48.84 53.22 54.13 0.607/8 98.70 110.50 112.97 1.701 98.70 110.50 112.97 1.70
1 1/4 356.30 381.29 386.52 3.751 1/2 356.30 381.29 386.52 3.501 3/4 1,202.82 1,316.67 1,340.47 16.4
2 1,279.31 1,389.68 1,412.76 15.92 1/4 1,297.73 1,404.64 1,426.99 15.42 1/2 1,297.73 1,401.17 1,422.79 14.9
See Page 51 for Figure 283 DI pricing
FIGURE 276
FIGURE 279 & 279L
FIGURE 282
FIGURE 283DI
FIGURE 276PFIGURE 283
Page 40 Box quantities are shown on Page 52
LIGHT DUTY U-BOLT STANDARD U-BOLT
Electro- Wt. Type Wt.Pipe Size Plain Galv. Each Pipe Size 304 Each
1/2" $5.68 $6.18 0.06 10" $799.90 4.803/4 5.93 6.52 0.07 12 1,478.75 7.701 6.31 6.90 0.07 14 1,725.02 8.20
1 1/4 6.77 7.61 0.08 16 2,129.20 8.701 1/2 6.94 7.70 0.09 18 2,833.26 14.0
2 7.32 8.24 0.10 20 3,077.58 14.02 1/2 9.57 12.19 0.28 24 3,556.16 18.0
3 9.84 12.45 0.313 1/2 11.23 14.17 0.35
4 11.36 14.55 0.385 15.65 19.43 0.45 PURLIN CLAMP6 21.71 29.68 0.958 27.14 37.21 1.20 Wt.10 47.08 66.38 2.30 Rod Size Plain Each
3/8" $63.24 0.82
PVC COATED U-BOLTSTEEL BEAM CLAMP w/
Wt. WELDLESS EYENUTPipe Size PVC Each Wt.
1/2" $41.01 0.11 Size Plain Paint Galv. Each3/4 41.34 0.12 No. 1 $390.25 $417.33 $422.99 5.501 41.94 0.12 No. 2 559.51 602.55 611.55 5.50
1 1/4 46.56 0.29 No. 3 880.34 925.47 934.90 9.001 1/2 46.62 0.31 No. 4 1,053.89 1,130.25 1,146.21 29.0
2 49.77 0.34 No. 5 1,359.45 1,526.06 1,560.89 33.32 1/2 62.74 0.74 No. 6 1,502.71 1,738.03 1,787.24 29.0
3 68.23 0.80 No. 7 1,686.98 1,935.49 1,987.46 33.33 1/2 71.71 0.86 No. 8 1,801.83 2,057.29 2,110.71 29.0
4 76.66 0.925 85.96 1.046 133.12 2.008 156.39 2.40 HEAVY DUTY 2 BOLT
PIPE CLAMP***Wt.
Pipe Size Plain Paint Galv. EachSTANDARD U-BOLT 3" $102.36 $128.74 $134.25 3.80
4 142.12 187.24 196.67 6.50Type Wt. 5 146.53 197.90 208.64 7.40
Pipe Size 304 Each 6 266.31 363.50 383.82 14.0 1/2" $35.86 0.12 8 291.43 405.27 429.08 16.43/4 37.44 0.13 10 684.21 859.83 896.56 25.31 38.85 0.14 12 1,146.02 1,452.16 1,516.17 44.1
1 1/4 70.98 0.38 14 1,211.28 1,619.45 1,704.80 58.81 1/2 74.71 0.39 16 1,307.96 1,752.93 1,845.96 64.1
2 76.99 0.42 18 3,234.62 4,111.36 4,294.68 1262 1/2 130.86 0.90 20 3,724.45 4,765.72 4,983.44 150
3 145.69 0.99 24 4,790.84 6,252.08 6,557.62 2113 1/2 181.55 1.10 28 7,024.07 9,127.43 9,567.23 303
4 200.44 1.20 30 8,600.36 11,106.34 11,630.32 3656 442.73 2.40 36 15,180.29 19,172.50 20,007.24 5758 520.96 2.90 *** Made Special To Customer Order
FIGURE 283L
FIGURE 283SS
FIGURE 283SS
FIGURE 290
FIGURE 298
FIGURE 297FIGURE 283PVC
Box quantities are shown on Page 52 Page 41
SIDE BEAM ANGLE BRACKET LINKED EYERODS (Not Welded)***
Wt.Rod Size Plain Paint Galv. Each Rod Size Plain
3/8" $8.96 $10.70 $11.06 0.25 3/8" $116.381/2 9.59 12.37 12.95 0.40 1/2 132.715/8 22.09 26.95 27.96 0.70 5/8 170.863/4 27.99 35.63 37.23 1.07 3/4 229.417/8 38.41 50.21 52.68 1.64 7/8 297.13
1 372.62*** Made Special To Customer OrderPrice above covers labor only for linking a pair of eye
THREE BOLT PIPE CLAMP rods, to be added to the base price for two Figure 33 Eye Rods of the desired lengths.
Wt.Pipe Size Plain Paint Galv. Each
1/2" $50.99 $55.23 $56.11 0.613/4 50.99 55.57 68.66 0.661 50.99 55.78 68.66 0.69 EXTENDED BEAM CLAMP
1 1/4 50.99 56.20 68.66 0.751 1/2 50.99 65.85 68.66 2.14 Wt.
2 52.13 68.99 72.19 2.43 Size Plain Paint Galv. Each2 1/2 54.15 74.42 77.12 2.92 NO. 1 $472.41 $513.36 $521.93 5.90
3 58.18 80.33 83.55 3.19 NO. 2 544.46 591.67 601.54 6.804 105.89 155.32 168.62 7.12 NO. 3 600.53 652.59 663.48 7.505 115.61 170.87 184.78 7.96 NO. 4 624.55 678.69 690.01 7.806 178.72 260.98 299.76 11.9 NO. 5 752.69 817.94 831.59 9.408 201.69 296.03 333.58 13.6 NO. 6 776.68 844.02 858.10 9.7010 319.07 459.67 467.13 21.3 NO. 7 880.79 957.15 973.11 11.012 370.06 516.46 534.23 23.7 NO. 8 927.14 1,003.50 1,019.47 11.014 971.60 1,240.80 1,318.81 38.8 NO. 9 960.87 1,044.17 1,061.59 12.016 1,015.14 1,312.87 1,446.67 42.9 NO. 10 1,121.06 1,218.24 1,238.57 14.018 1,051.62 1,373.37 1,550.16 46.4 NO. 11 1,601.48 1,740.32 1,769.35 20.020 1,657.57 2,064.85 2,137.56 58.7 NO. 12 1,761.57 1,914.29 1,946.22 22.024 1,855.73 2,250.90 2,475.77 89.3 NO. 13 1,841.65 2,001.32 2,034.70 23.030 5,660.83 6,639.62 7,668.02 141 NO. 14 2,081.83 2,262.31 2,300.05 26.036 7,853.80 9,568.42 13,882.30 246 NO. 15 2,161.92 2,349.35 2,388.54 27.0
*** Made Special To Customer Order Minimum Order of $50.00 Net per Size
ALLOY THREE BOLT PIPE CLAMP***
Wt.Pipe Size Plain Each ROLLER SUPPORT***
1 1/2" $522.53 2.482 533.63 2.70 Wt.
2 1/2 578.19 2.76 Pipe Size Plain Paint Galv. Each3 623.12 3.19 2" $194.87 $209.45 $212.50 2.094 942.19 7.30 2 1/2 207.90 225.25 228.88 2.435 1,192.85 7.96 3 213.95 232.69 236.61 2.656 1,294.83 12.3 3 1/2 270.38 289.81 293.88 2.728 1,557.48 14.0 4 292.19 311.62 315.69 3.4310 1,998.85 21.3 5 350.55 380.40 386.64 4.2612 3,402.48 24.0 6 427.37 481.52 492.84 7.7114 5,692.26 38.8 8 510.90 580.32 594.83 9.9316 6,646.31 43.1 10 646.53 764.54 789.22 16.718 6,769.25 47.8 12 823.13 961.97 991.00 19.320 9,353.86 58.7 *** Made Special To Customer Order24 9,477.55 90.8
*** Made Special To Customer Order
FIGURE 304Z
FIGURE 306
FIGURE 314
FIGURE 333
FIGURE 303
FIGURE 304
Page 42 Box quantities are shown on Page 52
SIDE BEAM BRACKET
Electro- Wt. Wt.Rod Size Plain Paint Galv. Each Pipe Size Plain Paint Galv. Each
3/8" $13.38 $15.18 $15.56 0.26 3" $68.79 $87.88 $91.87 2.751/2 23.73 27.48 28.26 0.54 4 69.67 90.50 94.85 3.005/8 36.48 43.14 44.53 0.96 5 69.67 90.50 94.85 3.00
6 99.84 132.81 139.70 4.758 125.58 162.03 169.65 5.2510 125.58 162.03 169.65 5.25
LINKED EYERODS (Welded)*** 12 224.03 275.05 285.72 7.3514 308.62 365.88 377.86 8.2516 321.22 378.48 390.46 8.25
Rod Size Plain 18 345.07 409.28 422.71 9.25 3/8" $103.58 20 390.13 466.83 482.87 11.11/2 116.38 24 440.49 530.04 548.76 12.95/8 145.353/4 200.357/8 242.381 322.83
*** Made Special To Customer OrderPrice above covers labor only for linking a pair of eye Wt. rods, to be added to the base price for two Figure 33 Pipe Size Plain Paint Galv. Each Eye Rods of the desired lengths. 3/4" $55.79 $74.04 $77.86 2.63
1 55.79 74.04 77.86 2.631 1/4 55.79 74.04 77.86 2.631 1/2 65.88 87.40 91.90 3.10
2 65.88 87.54 92.07 3.12SADDLE for 1" Insulation 2 1/2 65.88 87.54 92.07 3.12
Wt. 3 77.50 101.79 106.87 3.50Pipe Size Plain Paint Galv. Each 4 77.50 101.79 106.87 3.50
3/4" $44.05 $52.03 $53.70 1.15 5 77.50 102.62 107.88 3.621 44.05 52.03 53.70 1.15 6 111.07 154.66 163.78 6.28
1 1/4 44.05 52.73 54.54 1.25 8 131.01 179.60 189.76 7.001 1/2 45.65 58.25 60.43 1.50 10 139.34 187.93 198.09 7.00
2 47.84 59.15 61.52 1.63 12 251.67 315.54 328.89 9.202 1/2 47.84 59.98 62.52 1.75 14 289.42 362.86 378.22 9.20
3 67.02 79.17 81.71 1.75 16 362.74 426.60 439.96 9.204 71.18 85.97 89.06 2.13 18 387.25 473.33 491.33 12.05 71.18 87.71 91.16 2.38 20 403.00 489.08 507.08 12.46 85.32 112.05 117.63 3.85 24 471.16 567.65 587.82 13.98 119.88 154.93 162.26 5.0510 140.74 201.63 210.09 5.0512 175.30 225.97 236.57 7.30
Wt.Pipe Size Plain Paint Galv. Each
1 1/4" $71.44 $94.00 $98.72 3.25Wt. 1 1/2 71.44 97.47 102.91 3.75
Pipe Size Plain Paint Galv. Each 2 71.44 96.64 101.90 3.63 3/4" $53.64 $68.22 $71.27 2.10 2 1/2 74.72 99.92 105.19 3.63
1 53.64 68.22 71.27 2.10 3 74.72 102.00 107.70 3.931 1/4 53.64 68.22 71.27 2.10 4 81.28 108.56 114.27 3.931 1/2 53.64 68.22 71.27 2.10 5 81.28 109.47 115.36 4.06
2 58.18 72.76 75.81 2.10 6 123.94 173.16 183.45 7.092 1/2 68.79 85.45 88.93 2.40 8 151.71 204.12 215.08 7.55
SADDLE for 1 1/2" Insulation
PIPE COVERING PROTECTION
PIPE COVERING PROTECTION
FIGURE 337
FIGURE 341
FIGURE 352
FIGURE 352
FIGURE 353PIPE COVERING PROTECTION
PIPE COVERING PROTECTION
SADDLE for 1 1/2" Insulation
SADDLE for 2" Insulation
FIGURE 354PIPE COVERING PROTECTIONSADDLE for 2 1/2" Insulation
FIGURE 351
Box quantities are shown on Page 52 Page 43
PROTECTION SADDLE for 5 1/2" Insulation(ALLOY PIPE)
Wt. Pipe Size PlainPipe Size Plain Paint Galv. Each
10" $165.72 $226.46 $239.16 8.7512 273.13 342.82 357.40 10.014 366.53 453.22 471.37 10.016 380.54 475.57 495.44 13.7 INSULATION SHIELD18 424.84 523.34 543.94 14.2 (IRON PIPE)20 472.55 589.65 614.15 14.2 Pipe Size Plain24 486.56 611.99 638.22 18.1
CHANNEL ASSEMBLY***
Wt. Wt.Pipe Size Plain Paint Galv. Each Size Plain Paint Galv. Each
2" $74.09 $104.63 $111.02 4.40 2" X (2.59#)2 1/2 74.09 104.63 111.02 4.40 24" $484.23 $560.59 $576.56 11.0
3 74.09 104.63 111.02 4.40 36 673.55 784.62 807.85 16.04 74.09 108.80 116.05 5.00 48 863.22 1,008.99 1,039.47 21.05 74.09 108.80 116.05 5.00 60 1,086.79 1,267.28 1,305.02 26.06 155.37 211.60 223.35 8.10 72 1,275.39 1,490.59 1,535.59 31.08 155.37 224.09 238.46 9.90 84 1,464.35 1,721.20 1,774.90 37.010 172.53 233.28 245.98 8.75 96 2,356.00 2,647.56 2,708.52 42.012 220.85 298.60 314.84 11.0 108 3,648.27 3,974.54 4,042.75 47.014 296.48 372.84 388.80 11.0 120 4,026.55 4,387.52 4,463.00 52.016 435.32 525.91 548.05 14.7 3" X (4.1#) 18 449.45 555.31 577.45 15.3 24" $598.41 $716.42 $741.09 17.020 464.72 570.58 592.72 15.3 36 948.51 1,122.06 1,158.34 25.024 649.37 783.70 811.78 19.4 48 1,207.15 1,436.23 1,484.13 33.0
60 1,487.94 1,772.55 1,832.06 41.072 1,744.80 2,091.89 2,164.46 50.084 2,004.50 2,407.12 2,491.30 58.096 2,262.68 2,720.84 2,816.63 66.0108 2,543.47 3,057.16 3,164.57 74.0
Wt. 120 2,801.40 3,370.63 3,489.65 82.0Pipe Size Plain Paint Galv. Each 4" X (5.4#)
4" $120.66 $164.39 $173.54 6.30 36" $1,365.81 $1,594.89 $1,642.79 33.05 120.66 191.47 206.27 10.2 48 2,190.71 2,489.21 2,551.62 43.06 195.51 266.31 281.12 10.2 60 2,241.21 2,623.01 2,702.84 55.08 195.51 266.31 281.12 10.2 72 2,539.67 2,990.89 3,085.23 65.010 203.20 299.56 319.70 13.9 84 2,887.57 3,415.14 3,525.45 76.012 361.48 461.79 482.76 14.5 96 3,235.64 3,839.57 3,965.85 87.014 446.59 469.08 491.57 15.5 108 3,676.62 4,356.91 4,499.16 98.016 489.84 597.43 619.93 15.5 120 4,025.67 4,775.38 4,932.14 10818 605.14 635.61 666.10 21.0 5" X (6.7#) 20 706.29 864.57 897.66 22.8 36" $2,223.55 $2,508.17 $2,567.68 41.024 847.55 915.29 959.19 23.1 48 2,667.26 3,042.12 3,120.49 54.0
60 3,110.52 3,582.56 3,681.26 68.072 3,667.70 4,229.98 4,347.55 81.084 4,110.17 4,762.69 4,899.13 94.0
PROTECTION SADDLE for 4" Insulation 96 4,668.40 5,418.11 5,574.87 108(ALLOY PIPE) 108 4,906.54 5,746.49 5,922.12 121
Pipe Size Plain 120 5,111.93 6,042.13 6,236.62 134
SADDLE for 3" Insulation
SADDLE for 4" Insulation
*** Made Special To Customer Order
FIGURE 356Z
Price Upon Application - Made to Order
FIGURE 356PIPE COVERING PROTECTION
FIGURE 354PIPE COVERING PROTECTIONSADDLE for 2 1/2" Insulation
PIPE COVERING PROTECTION
FIGURE 357Z
FIGURE 355
Price Upon Application - Made to Order
Price Upon Application - Made to Order
FIGURE 365CVB
FIGURE 371
Page 44 Box quantities are shown on Page 52
CHANNEL ASSEMBLY*** PIPE SLEEVE
Wt.Size Plain Paint Galv. Each
6" X (8.2#) 36" $2,321.13 $2,668.22 $2,740.79 50.048 2,818.25 3,276.41 3,372.20 66.0 WATERPROOF PIPE SLEEVE60 3,315.74 3,891.90 4,012.37 83.072 4,062.04 4,749.28 4,892.97 99.084 4,557.04 5,355.34 5,522.26 11596 5,055.59 5,971.90 6,163.49 132108 5,553.69 6,581.07 6,795.89 148120 6,050.10 7,195.50 7,434.99 165
8" X (11.5#) HIGH TEMPERATURE PIPE 36" $3,882.88 $4,368.80 $4,470.41 70.0 INSULATION SHIELD48 4,678.21 5,316.85 5,450.38 92.060 5,475.71 6,280.96 6,449.33 116 Pipe Size 1" 1 1/2" 2"72 6,272.44 7,244.29 7,447.50 140 1/2" $96.56 $118.23 $123.3184 7,066.70 8,191.26 8,426.40 162 3/4 97.31 124.33 126.1596 7,857.69 9,159.36 9,405.30 185 1 109.81 125.74 135.24108 8,662.45 10,106.34 10,408.24 208 1 1/4 113.59 133.07 152.09120 9,699.70 11,296.31 11,630.15 230 1 1/2 118.14 139.17 160.99
2 142.62 162.04 186.992 1/2 160.80 179.59 209.39
3 176.64 204.32 220.373 1/2 209.39 220.13 247.19
4 223.27 246.26 272.315 256.59 297.03 321.28
SPRING ASSEMBLY 6 295.34 338.02 368.868 410.26 495.97 560.77
Wt. 10 463.59 539.68 594.91Size Plain Paint Galv. Each 12 542.98 653.42 743.72No. 1 $1,447.32 $1,458.43 $1,460.75 1.60 14 583.61 680.61 777.42No. 2 2,170.93 2,187.60 2,191.08 2.38 16 775.02 892.33 935.10No. 3 2,302.41 2,329.49 2,335.15 2.87 18 870.63 994.26 1,119.54No. 4 2,368.28 2,399.52 2,406.05 3.50 20 982.64 1,127.91 1,226.65No. 5 2,631.41 2,678.62 2,688.49 6.80 24 1,209.00 1,371.32 1,562.89No. 6 3,289.15 3,357.88 3,372.25 9.82
1" x 1" 1.5" x 1.5" 2" x 2" 2" x 2" 3" x 3" 3"x 3"x 1/4" x 1/4" x 1/4" x 3/8" x 1/4" x 1/2"
Angle Length Angle Length 6" $20.84 $144.91 $193.20 6" $205.20 $229.41 $247.5112 41.68 241.16 290.60 12 305.17 326.00 369.0918 74.54 251.92 302.26 18 324.16 362.20 410.4224 83.54 262.69 313.81 24 342.87 410.50 451.5630 104.29 273.38 325.29 30 361.77 422.60 492.8036 123.17 285.38 337.40 36 394.80 446.70 790.1042 142.43 297.47 349.49 42 460.14 542.15 921.7548 164.24 309.49 361.49 48 526.36 664.01 1,053.4172 227.02 345.68 481.77 72 789.50 1,086.62 1,580.20
***Made Special to Customer Order
FIGURE 465CVB
368.31381.55
656.77437.08
$197.97297.47313.91326.00338.01
FIGURE 374ANGLE IRON SUPPORT***
Angle
PRICE UPON APPLICATION
PRICE UPON APPLICATION
FIGURE 450
2.5" x 2.5"x 1/4"
FIGURE 371
*** Made Special To Customer Order Note: Figure 260 Washer Plates Are Not Included. Order Seperately
FIGURE 453
Insulation Thickness
FIGURE 399
Angle
Box quantities are shown on Page 52 Page 45
CUSHION SPRING ASSEMBLY BEAM CLAMP w/ SWING NUT*
Wt. Wt.Size Plain Paint Galv. Each Size Plain Paint Galv. EachNo. 1 $889.43 $920.67 $927.20 4.50 No. 1No. 2 1,198.15 1,295.34 1,315.66 14.0 3" $175.63 $183.96 $185.70 1.20No. 3 1,882.86 2,035.58 2,067.51 22.0 4 177.04 187.45 189.63 1.50
5 178.98 190.79 193.25 1.706 180.13 192.63 195.24 1.807 182.34 194.84 197.45 1.80
DROP-IN TYPE 8 183.77 196.96 199.72 1.90CONCRETE ANCHOR No. 2
Electro- Wt. 3" $175.63 $183.96 $185.70 1.20Tap Size Galv. Each 4 180.75 191.16 193.34 1.50
1/4" P.O.A. 0.03 5 182.34 194.14 196.61 1.703/8 P.O.A. 0.07 6 183.76 196.25 198.86 1.801/2 P.O.A. 0.12 7 188.61 201.11 203.72 1.805/8 P.O.A. 0.33 8 192.40 205.59 208.35 1.903/4 P.O.A. 0.49 No. 3
4" $175.63 $192.98 $196.61 2.505 237.43 256.87 260.94 2.806 243.80 263.93 268.14 2.90
STEEL CONCRETE 7 246.00 267.52 272.02 3.10INSERT 8 253.69 276.60 281.39 3.30
Wt. No. 4 Plain Paint Galv. Each 4" $274.18 $301.25 $306.91 3.90
Body Only $24.16 $29.85 $31.04 0.82 5 284.50 313.65 319.75 4.206 321.51 352.05 358.44 4.407 358.52 390.45 397.13 4.608 395.54 428.85 435.82 5.00
CONCRETE INSERT NUT No. 5 5" $404.76 $447.80 $456.79 6.20
Wt. 6 413.86 458.28 467.57 6.40Rod Size Plain Paint Galv. Each 7 424.72 474.01 484.32 7.10
1/4" $4.91 $5.53 $5.67 0.09 8 433.38 483.36 493.81 7.203/8 5.67 6.57 6.76 0.13 10 459.51 514.35 525.81 7.901/2 6.75 7.79 8.05 0.15 No. 6 5/8 8.08 9.40 9.67 0.19 5" $541.62 $608.26 $622.20 9.603/4 12.17 13.69 14.01 0.22 6 551.96 628.32 644.29 11.0
7 570.41 646.77 662.74 11.08 588.69 671.99 689.41 12.010 614.51 704.75 723.62 13.0
No. 7 MALE & FEMALE SWING ROD 6" $1,353.90 $1,464.97 $1,488.19 16.0FITTING 7 1,372.62 1,490.63 1,515.30 17.0
Wt. 8 1,400.96 1,525.92 1,552.04 18.0Size Plain Paint Galv. Each 10 1,468.94 1,600.84 1,628.42 19.0No. 1 $196.02 $198.11 $198.54 0.25 * Minimum Order of $100.00 Net Per SizeNo. 2 226.31 230.27 231.10 0.33No. 3 P.O.A. P.O.A. P.O.A. 1.12No. 4 P.O.A. P.O.A. P.O.A. 1.96No. 5 P.O.A. P.O.A. P.O.A. 3.55
FIGURE 701
FIGURE 514
FIGURE 478
FIGURE 650
FIGURE 702
FIGURE 650N
Page 46 Box quantities are shown on Page 52
ADJUSTABLE SWIVEL RING PVC COATED ADJUSTABLESWIVEL RING
Electro- Wt. Wt.Pipe Size Galv. Each Pipe Size PVC Each
1/2" $2.83 0.09 1/2" $13.34 0.113/4 2.97 0.10 3/4 18.45 0.131 2.99 0.10 1 19.78 0.13
1 1/4 3.14 0.10 1 1/4 20.13 0.151 1/2 3.21 0.11 1 1/2 23.14 0.17
2 3.21 0.12 2 26.05 0.182 1/2 5.76 0.32 2 1/2 28.44 0.34
3 6.34 0.35 3 48.13 0.393 1/2 9.71 0.39 3 1/2 91.48 0.42
4 9.71 0.43 4 104.54 0.485 17.19 0.65 5 147.63 0.696 19.20 1.09 6 164.24 1.138 25.68 1.24 8 187.47 1.29
J-HANGERADJUSTABLE SWIVEL RING FELT LINED* Electro- Wt.
Electro- Wt. Pipe Size Galv. EachPipe Size Galv. Each 1/2" $7.70 0.203/4" to 2" $38.41 0.15 3/4 7.70 0.23
2 1/2 44.15 0.32 1 7.70 0.243 49.45 0.35 1 1/4 7.95 0.27
3 1/2 58.18 0.39 1 1/2 8.58 0.294 68.79 0.43 2 10.85 0.325 78.42 0.65 2 1/2 20.83 0.716 115.11 1.09 3 21.71 0.778 181.19 1.24 3 1/2 28.71 0.84
* On 1/2" to 3" order next larger size due to felt 4 31.55 1.395 76.61 1.666 76.61 2.268 91.04 3.32
NFPA SWIVEL RING
Electro- Wt. J-HANGER - FELT LINED*Pipe Size Galv. Each
1/2" $2.90 0.09 Electro- Wt.3/4 2.90 0.10 Pipe Size Galv. Each1 2.90 0.10 1/2" $18.20 0.20
1 1/4 3.12 0.10 3/4 18.20 0.231 1/2 3.16 0.11 1 18.20 0.24
2 3.16 0.12 1 1/4 18.20 0.272 1/2 5.68 0.25 1 1/2 22.43 0.29
3 6.18 0.30 2 27.02 0.323 1/2 9.98 0.33 2 1/2 46.80 0.71
4 11.11 0.41 3 51.38 0.775 16.79 0.58 3 1/2 66.22 0.846 18.68 0.92 4 68.33 1.398 25.24 1.16 5 149.40 1.66
6 156.63 2.268 182.08 3.32
* On 1/2" to 3" order next larger size due to felt thickness
FIGURE 967JF
FIGURE 800F
FIGURE 800
FIGURE 800FP
FIGURE 800PVC
FIGURE 967J
Box quantities are shown on Page 52 Page 47
PIPE ALIGNMENT GUIDE PIPE ALIGNMENT GUIDE
Wt. Wt.Plain Paint Galv. Each Plain Paint Galv. Each$550.92 $591.19 $599.61 5.80 $823.96 $889.91 $903.70 9.50609.61 659.60 670.05 7.20 963.01 1,046.32 1,063.73 12.0631.70 688.62 700.53 8.20 1,086.07 1,177.70 1,196.86 13.2692.70 766.28 781.67 10.6 1,503.84 1,616.99 1,640.65 16.3850.47 958.76 981.40 15.6 1,995.23 2,175.72 2,213.46 26.0976.90 1,112.26 1,140.57 19.5 2,611.16 2,835.38 2,882.26 32.3
1,158.43 1,344.47 1,383.37 26.8 3,490.87 3,825.46 3,895.42 48.21,768.68 2,015.80 2,067.48 35.6 4,036.12 4,431.80 4,514.53 57.02,584.87 2,891.69 2,955.85 44.2 4,837.79 5,338.29 5,442.94 72.13,138.53 3,503.67 3,580.02 52.6 5,934.38 6,520.96 6,643.61 84.53,851.01 4,311.25 4,407.48 66.3 6,913.80 7,635.74 7,786.70 1034,254.47 4,807.73 4,923.41 79.7 7,742.61 8,645.04 8,833.73 1294,812.33 5,555.10 5,710.41 106 8,450.46 9,519.49 9,743.02 1535,885.15 6,697.34 6,867.16 117 10,499.34 11,714.15 11,968.16 140
PIPE SLIDE ASSEMBLY***
Pipe PipeSize Travel 1-A 2-B 3-C Size Travel 1-A 2-B 3-C
5" $558.54 $1,112.58 $1,283.84 5" 7.00 12.0 14.010 746.05 1,413.30 1,648.21 10 10.0 16.0 17.015 920.48 1,737.75 1,962.00 15 13.0 19.0 21.020 1,108.16 2,038.89 2,276.95 20 17.0 22.0 24.0 5" $899.98 $1,691.43 $1,913.52 5" 11.0 19.0 20.010 1,056.51 2,085.36 2,155.75 10 15.0 23.0 24.015 1,327.57 2,456.31 2,713.29 15 19.0 27.0 28.020 1,576.31 2,873.81 5,086.71 20 23.0 31.0 53.0
Pipe PipeSize Travel 1-A 2-B 3-C Size Travel 1-A 2-B 3-C
5" $622.68 $1,222.54 $1,412.12 5" 7.00 12.0 14.010 837.68 1,559.91 1,803.98 10 10.0 16.0 17.015 1,039.60 1,911.85 2,154.43 15 13.0 19.0 21.020 1,263.93 2,240.48 2,496.87 20 17.0 22.0 24.0 5" $1,000.78 $1,865.53 $2,096.78 5" 11.0 19.0 20.010 1,193.96 2,296.11 2,375.67 10 15.0 23.0 24.015 1,501.67 2,703.71 2,969.86 15 19.0 27.0 28.020 1,787.07 3,157.87 5,572.36 20 23.0 31.0 53.0
Pipe PipeSize Travel 1-A 2-B 3-C Size Travel 1-A 2-B 3-C
5" $636.09 $1,245.52 $1,438.94 5" 7.00 12.0 14.010 856.84 1,590.55 1,836.54 10 10.0 16.0 17.015 1,064.50 1,948.26 2,194.66 15 13.0 19.0 21.020 1,296.50 2,282.62 2,542.86 20 17.0 22.0 24.0 5" $1,021.86 $1,901.93 $2,135.10 5" 11.0 19.0 20.010 1,222.70 2,340.19 2,421.66 10 15.0 23.0 24.015 1,538.07 2,755.45 3,023.51 15 19.0 27.0 28.020 1,831.13 3,217.26 5,673.91 20 23.0 31.0 53.0
*** Made Special to Customer Order
10" to 24" 10" to 24"
Plain
Type
Up to 8" Up to 8"
Paint
Type
10" to 24"
Wt. Each
No. 14 No. 13 No. 12
FIGURE 1010
Type
Plain
Wt. Each
Wt. Each
Up to 8" Up to 8"
10" to 24" 10" to 24"
10" to 24"
Galv.
Up to 8" Up to 8"
Paint
Galv.
No. 5 No. 4 No. 3 No. 2
No. 11 No. 10 No. 9 No. 8 No. 7
No. 1
No. 14 No. 13 No. 12 No. 11 No. 10 No. 9 No. 8 No. 7 No. 6 No. 5 No. 4 No. 3 No. 2 No. 1
No. 6
Size Size
FIGURE 1006 FIGURE 1007
Page 48 Box quantities are shown on Page 52
CONCRETE ATTACHMENT WEDGE ANCHORw/o PIN
Wt. Electro- StainlessRod Size Plain Paint Galv. Each Bolt Diameter Galv. Steel
3/8" $436.28 $455.03 $458.95 2.70 1/4" P.O.A. P.O.A.1/2 438.18 465.25 470.91 3.90 3/8 P.O.A. P.O.A.5/8 500.44 538.62 546.60 5.50 1/2 P.O.A. P.O.A.3/4 527.79 577.08 587.38 7.10 5/8 P.O.A. P.O.A.7/8 556.60 685.72 712.72 18.6 3/4 P.O.A. P.O.A.1 775.17 904.29 931.28 18.6 7/8 P.O.A. P.O.A.
1 1/4 2,044.04 2,312.69 2,368.86 38.7 1 P.O.A. P.O.A.1 1/2 2,596.23 2,987.74 3,069.61 56.4 1 1/4 P.O.A. P.O.A.1 3/4 3,004.74 3,615.62 3,743.35 88.0
2 3,475.79 4,114.43 4,247.97 92.0
PIPE STRAP
CONCRETE ATTACHMENT Electro- Wt.w/ PIN Pipe Size Galv. Each
Wt. 1/2" $39.73 0.20Rod Size Plain Paint Galv. Each 3/4 45.74 0.23
3/8" $466.77 $486.20 $490.27 2.80 1 49.89 0.281/2 468.57 497.03 502.98 4.10 1 1/4 51.56 0.335/8 537.29 577.56 585.97 5.80 1 1/2 52.98 0.363/4 571.21 624.66 635.84 7.70 2 66.22 0.947/8 590.42 723.70 751.57 19.8 2 1/2 88.30 1.111 872.43 1,009.88 1,038.62 19.8 3 111.17 1.30
1 1/4 2,185.35 2,469.96 2,529.47 41.0 3 1/2 121.32 1.491 1/2 2,799.24 3,215.75 3,302.84 60.0 4 134.92 1.731 3/4 3,306.81 3,956.56 4,092.42 93.6 5 158.84 1.83
2 3,825.21 4,519.39 4,664.54 100 6 187.20 2.43
CONCRETE SINGLELUG PLATE DRAIN, WASTE, VENT CLAMP
Wt.Rod Size Plain Paint Galv. Each PVC Electro- Wt.
3/8" $414.47 $429.74 $432.94 11.60 Pipe Size Coated Galv. Each1/2 416.27 440.57 445.65 11.60 1 1/2" $25.26 $17.23 0.205/8 475.42 510.13 517.38 11.60 2 35.93 24.67 0.223/4 501.40 554.85 566.03 12.00 3 39.39 26.25 0.247/8 528.77 649.56 674.82 22.0 4 42.38 27.51 0.261 736.41 887.05 918.54 31.9
1 1/4 1,941.84 2,249.36 2,313.66 43.81 1/2 2,466.41 2,791.98 2,860.06 45.61 3/4 2,854.51 3,250.88 3,333.76 55.7
2 3,302.00 3,717.81 3,804.75 58.2
FIGURE 1020 Type 1
FIGURE 1020 Type 2
FIGURE 1309
FIGURE DWV, DWVPVCFIGURE 1022
FIGURE C1108
Box quantities are shown on Page 52 Page 49
COPPER TUBING BAND HANGER STAMPED STEEL HANGERfor COPPER TUBING
Copper Wt. Copper Wt.Tube Size Finish Each Tube Size Finish Each
1/2" $4.21 0.11 1/2" $11.21 0.083/4 4.32 0.11 3/4 11.65 0.081 4.59 0.11 1 12.19 0.09
1 1/4 4.79 0.12 1 1/4 14.40 0.091 1/2 5.07 0.14 1 1/2 15.18 1.10
2 5.46 0.162 1/2 10.25 0.16
3 11.97 0.383 1/2 14.80 0.42
4 17.49 0.45 COPPER TUBING PIPE CLIP
Copper Wt.Tube Size Finish Each
EYE SOCKET 3/8" $1.05 0.191/2 1.15 0.02
Copper Wt. 3/4 1.68 0.02Rod Size Finish Each 1 1.84 0.03
1/4" $15.01 0.08 1 1/4 2.24 0.033/8 16.43 0.08 1 1/2 2.35 0.061/2 18.45 0.11 2 2.60 0.08
EXTENSION RING HANGERfor COPPER TUBING for COPPER TUBING
Copper Wt. Copper Wt.Tube Size Finish Each Tube Size Finish Each
1/2" $32.40 0.08 1/4" $4.24 0.063/4 32.85 0.10 3/8 4.55 0.081 34.91 0.12 1/2 4.70 0.08
1 1/4 43.59 0.14 3/4 5.70 0.101 1/2 53.07 0.18 1 6.38 0.12
2 61.81 0.26 1 1/4 6.74 0.142 1/2 86.80 0.38 1 1/2 8.85 0.18
3 104.18 0.49 2 11.04 0.243 1/2 113.96 0.64 2 1/2 16.42 0.38
4 117.74 0.88 3 23.40 0.484 24.10 0.68
HANGER ADJUSTERfor COPPER TUBING
Copper Wt.Rod Size Finish Each
3/8" $50.06 0.281/2 62.60 0.31
FIGURE 38CT
FIGURE 81CTHINGE HANGER
FIGURE 66CT
FIGURE 34CT
FIGURE 1A CT
FIGURE 12 CT
FIGURE 72CT
Page 50Box quantities are shown on Page 52
COPPER EXTENSION RING COPPER CLEVIS HANGERHANGER (DOMESTIC)
Copper Wt. Copper Wt.Tube Size Finish Each Tube Size Finish Each
1/2" $20.48 0.09 1/2" $8.83 0.163/4 21.37 0.10 3/4 9.09 0.161 23.93 0.11 1 9.09 0.19
1 1/4 29.10 0.12 1 1/4 9.84 0.221 1/2 38.56 0.13 1 1/2 10.22 0.29
2 49.00 0.15 2 11.74 0.322 1/2 25.12 0.72
3 26.88 0.823 1/2 27.76 0.91
SINGLE PLATE 4 28.02 1.075 50.57 1.76
Copper Wt. 6 57.87 1.92Rod Size Finish Each
3/8" $6.24 0.191/2 10.59 0.18
WIRE PIPE HOOKS
Copper Wt.SINGLE PLATE (Steel) Size Finish Each
1/2" x 4" $4.39 0.06Copper Wt. x 6 5.55 0.08
Rod Size Finish Each x 8 7.23 0.103/8" $16.88 0.17 x 10 9.22 0.12
x 12 10.36 0.14 3/4" x 4" $4.39 0.06
x 6 5.55 0.08x 8 7.53 0.10
SPLIT RING HANGER x 10 9.22 0.12(Double Tapping) x 12 10.36 0.14
Copper Wt. 1" x 4" $4.81 0.08Rod Size Finish Each x 6 5.79 0.10
3/8" $32.84 0.16 x 8 7.95 0.121/2 32.94 0.17 x 10 9.64 0.143/4 34.71 0.20 x 12 10.62 0.161 37.44 0.21 1 1/4" x 6" $6.38 0.08
1 1/4 45.74 0.29 x 8 7.23 0.101 1/2 70.38 0.31 x 10 9.22 0.12
2 88.83 0.35 x 12 10.62 0.152 1/2 P.O.A. 0.57 1 1/2" x 6" $7.23 0.10
3 P.O.A. 0.72 x 8 8.37 0.134 P.O.A. 1.16 x 10 9.35 0.14
x 12 10.62 0.16
FIGURE 90CT
FIGURE 81SCT FIGURE 100CT
FIGURE 111
FIGURE 85SCT
FIGURE 85CT
Box quantities are shown on Page 52 Page 51
COPPER RISER CLAMP NO-THREAD FITTING
Copper Wt. Electro- Wt.Tube Size Finish Each Size Plain Galv. Each
1/2" $21.08 0.70 1" $57.67 $72.08 0.553/4 21.08 0.74 1 1/4 57.67 72.08 0.501 26.25 0.75
1 1/4 27.14 0.771 1/2 33.07 0.80
2 34.96 0.842 1/2 41.02 1.60 DOUBLE U-BOLT
3 47.58 1.803 1/2 63.74 1.95 Electro- Wt.
4 63.86 2.04 Size Plain Galv. Each5 120.18 3.50 1" x2" $50.68 $63.34 0.806 137.21 5.25 x 2 1/2 55.02 68.77 0.86
x 3 60.31 75.38 0.95x 4 66.77 83.46 1.07x 6 84.32 105.40 1.45x 8 100.93 126.17 1.75
COPPER TUBING SWIVEL RING 1 1/4" x2" $52.81 $66.01 0.90 x 2 1/2 56.95 71.18 0.96
Copper Wt. x 3 62.96 78.69 1.05Tube Size Finish Each x 4 69.41 86.76 1.16
1/2" $5.30 0.11 x 6 87.50 109.38 1.453/4 5.30 0.11 x 8 105.17 131.47 1.801 5.30 0.11
1 1/4 5.30 0.131 1/2 5.68 0.13
2 5.68 0.152 1/2 14.39 0.16 U- BOLT FOR
3 15.90 0.32 DUCTILE IRON PIPE3 1/2 21.58 0.35 Size OD Hot-Dip Wt.
4 23.35 0.38 DI Nominal Actual Galv. Each5 112.32 0.58 3 3.96" $38.38 1.106 162.19 0.92 4 4.80 39.71 1.21
6 6.90 88.11 2.578 9.05 167.49 3.0010 11.1 193.11 5.1112 13.2 254.32 8.07
SWIVEL FITTING 14 15.3 301.59 9.0116 17.4 418.26 9.92
Electro- Wt. 18 19.5 442.91 14.5Size Plain Galv. Each 20 21.6 554.39 15.71" $39.47 $46.54 0.90 24 25.8 840.60 18.2
1 1/4 48.02 56.63 1.00 30 32.0 1,138.86 21.3
STRAIGHT FITTING
Electro- Wt.Size Plain Galv. Each1" $39.47 $49.33 0.52
1 1/4 48.02 60.03 0.65
FIGURE 126CT
FIGURE 800CT
FIGURE SBF1
FIGURE 283DI
FIGURE SBF2
FIGURE SBF3
FIGURE 283DBL
Page 52
Pipe/TubeSize 1A 1ACT 66CT 72 81 100 100CT 126 126CT 126LD 175 200 2831/2" 100 100 25 100 100 50 50 25 25 ---- 25 50 1003/4" 100 100 25 100 100 50 50 25 25 ---- 25 50 100 1" 100 100 25 100 100 50 50 25 25 ---- 25 50 100
1 1/4" 100 100 25 50 100 50 50 25 25 ---- 25 50 1001 1/2" 100 100 25 50 100 50 50 25 25 25 25 50 100
2" 100 100 25 50 100 50 50 25 25 25 25 50 1002 1/2" 50 50 ---- 25 50 25 25 25 25 ---- 20 25 50
3" 50 50 ---- 25 25 25 25 20 25 20 10 25 503 1/2" 50 50 ---- ---- ---- 25 25 15 20 ---- 10 25 25
4" 25 25 ---- 25 25 20 25 15 15 15 ---- 20 25 5" 20 20 ---- ---- ---- 10 10 10 10 ---- ---- ---- 25 6" 10 10 ---- ---- ---- 10 10 ---- 10 ---- ---- ---- 20 8" 5 ---- ---- ---- ---- 5 ---- ---- ---- ---- ---- ---- 10
Pipe/Tube RodSize 304 800 967J DWV Size 14 28 47 75 75N 82 851/2" 25 100 50 ---- 3/8" 20 100 100 50 100 20 1003/4" 25 100 50 ---- 1/2" 15 100 100 50 100 20 100 1" 25 100 50 ---- 5/8" 10 ---- 50 50 100 20 ----
1 1/4" 25 100 50 ---- 3/4" ---- ---- 50 50 100 20 ----1 1/2" 10 100 50 50 7/8" ---- ---- 25 ---- ---- 20 ----
2" 10 100 50 50 1" ---- ---- ---- ---- ---- ---- ----2 1/2" 10 50 25 ----
3" 10 50 25 50 Note: Pallet/Crate Quanities are Available3 1/2" 10 50 20 ---- Figure 94 Box Quantity are in Feet
4" ---- 20 15 50 5" ---- 20 15 ---- 6" ---- 20 10 ---- 8" ---- 10 5 ----
RodSize 94 103 123 132 153 165 165H 192 192SS 192STP 192W 238 2603/8" 150 100 100 50 100 100 100 100 100 100 100 100 251/2" 90 50 50 50 ---- 50 50 100 100 100 100 100 255/8" 54 25 25 50 ---- 25 25 50 50 50 50 50 253/4" 36 20 20 25 ---- 20 20 50 50 50 50 50 257/8" 24 15 15 25 ---- 15 15 50 50 50 ---- 25 101" 18 10 10 25 ---- 10 10 ---- ---- ---- ---- ---- 10
RodSize 276 276P 279 514 650 650N3/8" 20 20 50 50 50 1001/2" 20 20 50 50 50 1005/8" 15 15 50 25 50 1003/4" 15 15 50 10 50 1007/8" 10 10 25 ---- 50 1001" 10 10 25 ---- ---- ----
FIGURE NUMBERS
FIGURE NUMBERS
STANDARD BOX QUANTITIES
FIGURE NUMBERS
FIGURE NUMBERS FIGURE NUMBERS
Page 53
NOTESCarpenter & Paterson, Inc.
