Date post: | 24-Dec-2015 |
Category: |
Documents |
Upload: | ernest-jefferson |
View: | 216 times |
Download: | 0 times |
Mark Martin Carpentry
5/5/10
Typical safety tags
Barriers
Barricades
Outside of a hardhat
Inside of a hard hat
Safety glasses
Safety goggles
Safety face shield
Full-body harness and lanyards
Safety shoe
Safety gloves
Completed table 3
Earplugs/earmuffs
Self-contained breathing apparatus
Full face piece mask
Supplied Air Mask
Half Mask
Lift Safely
Examples of Barriers and Barricades
Barriers: tell people if there are anything that has water, big hole ect those two examples barriers but there is a lot more things that barriers can be used.Barricades: Are signs that might say road closed, detour, caution, danger, men working.
Warning
Never remove a barricade unless you have been authorized to do so. Follow your employer’s procedures for putting up and removing barricades.
Personal Protective Equipment Use And Care.
•Regularly inspect it.• Properly care for it.•Use it properly when it is needed.•Never alter or modify it in any way.
Did You Know?
Hard hats used to be made of metal. However, metal conducts electricity, so most hard hats are now made of reinforced plastic or fiberglass.
Hard Hat Care
Hard Hats take care of your head when you are on a construction site because if you don’t have it on you will risk in a injury or getting fined for not following the rules on a job site.
WarningsHandle safety glasses and goggles with care. If they get scratched, replace them. The scratches will interfere with your vision. Clean the lenses regularly with lens tissues or a soft cloth
Work gloves and safety shoe
Work gloves: are important to protect your hands well you are working so you can’t get blisters or getting hurt.Work shoe: When you are working in place that requires to wear safety shoe such as a construction site.
WarningWhen a respirator is required, a personal monitoring device is usually also required. This device samples the air to measure the concentration of hazardous chemicals.
Warnings
Handle safety glasses and goggles with care. If they get scratched, replace them. The scratches will interfere with your vision. Clean the lenses regularly with lens tissues or a soft cloth.
Review Questions1.The _________ keeps the key to a lock used for lockout/tagout.A. Site supervisorB. Person who puts on the lockC. Site safety managerD. OSHA Inspector2. You may operate a device that is tagged out if there is no imminent danger.A. TrueB. False3. A yellow and purple warning barricade means________.C. Caution D. DangerC. Physical dangerD. Radiation hazard4. Hole cover must be strong enough to support ____ the weight of anything
that may be placed on top of them.E. ExactlyF. TwiceG. Four timesH. Ten Times
Review Questions5.Adjust the webbing of a hard hat so that there is _______ between your head and the shell.
A. NO SpaceB. As much space as possibleC. At least 1 inch of space D. Less than 1 inch of space6. ___provide the best all-around protection for your eyes.E. Welding hoodsB. Face ShieldsC. Safety gogglesD. Strap-on glasses 7. A_____ has its own clean air supply E. Half mask B. Mouthpiece with mechanical filterC. Self-contained breathing apparatusD. Full face piece mask8. Whenever there is danger of an inhalation hazard, you must use a
respirator.E. TrueF. False
Review Questions9._____do(es) not interfere with the respirator’s sealA. Facial hairB. Gum and Tobacco chewingC. DenturesD. Temple bars on glasses10. When lifting heavy objects, keep as much weight
as possible over your______.A. HipsB. ShouldersC. LegsD. Back
Answers Review Questionsc. Site safety managerb. Falsea. Cautionb. Twicec. At least 1 inch of spacec. Safety gogglesc. self- contained breathing apparatusa. Trueb. Gum and chewing tobaccoc. legs
Sources
-Google images-Textbook