FeaturesMulti-point door lock technology ensures ultimate PAS 24 security in a single bar meaning security is achieved without additional shoots, just like it is with a multi point door lock
‘Bear Grip’ twin hooks at every locking point for increased resistance against attack
11mm hook penetration maximises security of the window
Ease of fabrication with minimal gearbox preparation
Reduced amount of fixing points for speed of fabrication
Aesthetically pleasing fully retractable design gives increased clearance when operating the window
Maximum clearance for ease & speed of installation, minimising remedials
Unique steel hook design into the steel keep plate ensures less wearing over time
Gearbox’s clever design ensures that if lock is abused the handles spindle failure will prevent costly sashreplacements
Keep design allows 1mm adjustment safely from inside the house
Extensive testing guarantees long term integrity
Designed to meet the requirements of PAS 024:2012 as part of a compliant window system
Inline gearbox available in 20mm and 22mm backset options 6 bar lengths suitable for sash rebate sizes from 200mm to 1400mm
Window Locks
Fortress Multi Point Window Lock
CASEMENT W
INDOWS
aAluminium
024PAS
YEAR10
Mechanical Guarantee
Window Locks
ERA Straight Road, Short Heath, Willenhall, West Midlands WV12 5RA United KingdomTel: +44 1922 490049 Fax: +44 1922 494420 [email protected]
www.erahomesecurity.com
Lock Case:
Ordering Details
Bar Sash Rebate Size Part No.
Keeps and Optional Shootbolts - please contact sales for details
200mm400mm600mm800mm
1000mm1200mm
200-400mm400-600mm600-800mm
800-1000mm1000-1200mm1200-1400mm
WLFTRG20001WLFTRG20002WLFTRG20003WLFTRG20004WLFTRG20005WLFTRG20006
Bar - 20mm Backset
Bar Length
123456
Locking Points
122333
Bar Sash Rebate Size Part No.
200mm400mm600mm800mm
1000mm1200mm
200-400mm400-600mm600-800mm
800-1000mm1000-1200mm1200-1400mm
WLFTRG22001WLFTRG22002WLFTRG22003WLFTRG22004WLFTRG22005WLFTRG22006
Bar - 22mm Backset
Bar Length
123456
Locking Points
122333
All dimensions are in mm.ERA reserves the right to change specification without notice.
It is the responsibility of the window manufacturer to ensure that the finished product meets any required safety and performance specification.
Technical InformationCorrosion resistanceMeets the requirements of BS EN 1670:2007 Grade 4 (240 hours)
Zinc Plated, Trivalent Passivated and Seal
Material Specification
Operation
Face Bar and Hooks: Zinc Plated, Trivalent Passivated and Seal
Tested in excess of 50,000 cycles and beyond BS6375-2 requirements
Keeps: Zinc or Steel Plated, Trivalent Passivated and Seal
PackagingLocks
Keeps
20 locks per box
50 keeps and top plates per bag, 200 per box
PerformanceTested to meet the requirements of PAS24:2012 when used in a compliant window set
Finish Metal Components: Rogard Silver
Non Metal Components: Grey Composite
Recommended ScrewsLock: 4.2mm x 20mm PVCu screwsKeeps: 4.2mm x 25mm* Reinforcing screws (*for narrow mullions use 22mm)
CASEMENT W
INDOWSFortress Multi Point Window Lock