cashco_controlvalvecat

7/31/2019 cashco_controlvalvecat

1/12

Innovative SolutionsInnovative SolutionsTo make it right

Control Valves


2/12

Get Consistent Quality

By involving every employee in our ISO 9001/2000 Quality Assurance

Program, we provide quality you can count on. We have coordinated

our business systems, invested in state-of-the-art machine tools, and

built an extensive component inventory so we can consistently provide

cost-effective solutions and on-time delivery to meet your replacement

or project requirements regardless of size or complexity.

Make the Right Choice

We simply make it right by putting your needs first. The next time you

specify control valves, regulators or you need a replacement fast, call

the supplier that makes it right. Rely on Cashco for your single-source

convenience. Great service, field-proven quality, and timely delivery

makes Cashco the right choice.

Select Control Valves & Regulators

FOR SPECIALIZED OR UTILITY SERVICE

We manufacture a broad line of throttling rotary and linear control

valves, pressure reducing regulators, and back pressure regulators in

line sizes from 14 inch to 12 inches and Cv ranges from .002 to 8,455.Models are available to handle slurries, cryogenic service, and corrosive

fluids; to withstand high temperatures and pressures; and to maximize

the reduction of fugitive emissions. Contact Cashco for complete

product information.

Introduction

22


3/12

Control Valves

Light Industrial Utility

Model 2296 5

Model 964 5

Model 2266 6

Model 685 6

Process Control Valves

Model Ranger QCT 7

Models 520/521 8

Model The Premier 8

Model 988, 988-MB & 989 9

Model 987 10

Controllers

Model 764P & 764T 11

Table of Contents

3


4/12

44

At Cashco we have been creating innovative pressure control

solutions to meet the needs of American industry since 1920. Today

youll find the Cashco name on an extensive line of control valves, self-

contained regulators, and related components.

Cashco control valves and regulators are in use worldwide, covering a

wide range of applications. We believe our quality is surpassed only by

the service we provide to ensure you get the product you need

when you need it. When you contact Cashco or our representatives,

you will discover the care we take to help you specify the best valve

for your application and in the speed with which we handle your order large or small.

If you dont find what youre looking for in the following pages, we will

be glad to provide you with personal assistance and technical

literature. Just call (785) 472-4461 or fax (785) 472-3539 your request.

You can also email us at: [email protected].

Light Industrial Utility


5/12

Body sizes:1/2", 3/4", 1", 1-1/2", 2"

Maximum Cv:41

Materials:Body 316 L SSTTrim SSTSeat SST, TFE

End connections:

NPT female pipe thread, Flanged,and Extended Nipples

Temperature range:-20F to +400F;-325F to +100F cryogenic

Pressure drop:Up to 275

Seat leakage:Metal - II & IVSoft - VI

Options:Cryogenic Construction, Reduced Orifice,and Extension Columns

5

The Model 2296 is a stainless steel bodied covalve is like the 2266 with its features. The M

2296 offers Quick - Change Trim, equal or litrim characteristic, and all wetted 316 or 3

SST. With cryogenic capabilities the 2296 is o

the most versatile SST control valves onmarket. This is an economical stainless scontrol valve with cryogenic capability.

CashcoModel 2296

Body sizes:3/4", 1", 1-1/2", 2", 3"

Maximum Cv:From 4 to 100

Materials:Body CI, CSTrim SSTSeat Metal, TFE

End connections:

3/4", 1", 1-1/2", 2" NPT1-1/2", 2", 3" 125#, 250# integral flanges or150#, 300# separable steel flanges

Temperature range:-20F to +450F

Pressure drop:Soft seat up to 400 psidMetal seat up to 740 psid

Seat leakage:Class IV and Class VI

Options:Stellited metal seat,P/P and I/P smart positioners

The Model 964 is a globe-style pneumatic controlvalve available in iron and carbon steel for general

plant utility services. It is field-reversible withoutremoval from the line. This workhorse valve

offers equal-percentage quick-change cage-type

trim and can handle steam, industrial gases, air,water, and oil applications. This is a versatile, low-cost valve available in iron and steel.

CashcoModel 964


6/12

Body sizes:1/2", 3/4", 1", 1-1/2", 2"

Maximum Cv:From 3.5 to 45

Materials:Body BRZTrim SSTSeats Metal, TFE

End connections:NPT female pipe thread

Temperature range:-20F to +400F-325F to +150F cryogenic

Pressure drop:From 40 to 400 psid

Seat leakage:Class II and Class VI

Options:Extension columns to protect packing andactuator in cryogenic service

Body sizes:1/2", 3/4", 1", 1-1/2", 2"

Maximum Cv:2.5 to 34

Wetted Materials:316 SST

End connections:NPT

Temperature range:Up to +175F

Pressure Inlet:

Inlet: up to 1000 psigPressure drop:

Up to 600 psid

66

The Model 2266 is a brass-bodied low-costcontrol valve well-suited for utility and processapplications. With optional extension columns it

becomes an excellent cryogenic valve. The Model2266 offers a linear trim characteristic. It can beused without a positioner, has quick-change trim,

and is field-reversible with fail-safe action. This isan economical utility control valve with standard

live loaded packing.

CashcoModel 2266

The Model 685 is a sliding stem pneumatic 3-wayvalve. This valve is designed for either mixing of

two separate flow streams into a common outletor for diverting a common flow stream into twoseparate outlet flow streams. Commonly used forinline chemical mixing or bypass temperaturecontrol loops.

CashcoModel 685


7/12

7

Body sizes:1", 1-1/2", 2", 3", 4", 6", 8"


Materials:Body DI, CS, SSTTrim Inconel X-750/625 metal seals TFE or Kel-F softseals SST or Stellite #6 plugRemaining parts SST20 trim combinations to select from

End connections:Flanged in CS and SST and available in flangeless


Pressure drop:

From 150 to 1400 psidSeat leakage:

ANSI/FCI 70-2, Class VI with TFEClass IV above 500F or without TFE

Options:Multiple low noise reduction trim and seal retainers0.2, 0.4, 0.6 reduced trimsAnti-cavitation trim, abrasion sleeve, P/P or I/P smartpositioners, position switch, line bolting, specialpacking designsNACE serviceCryogenic servicePneumatic, electric, or manual actuators

Face to face:ISA-S75.04

The Ranger QCT is the only truly universal covalve you can buy. It is the most versa

adaptable, and easily maintainable valve produced. No other valve is more user friend

The Ranger offers over 20 different combinations. Trim can easily be changed in

than 5 minutes without disturbing the packactuator, or positioner calibration. The se

area is a threadless design, which re

corrosion or collection of chemical depositsother valve on the market can handle cavitationoise reduction as easily or as economically!

A selection of 3 body materials with a btemperature range from -325F to +750F m

the Ranger adaptable for use in steam, transfer fluids, slurries, gases, liquids,

cryogenic applications. Rangers unique seating design provides both Class VI and b

up Class IV seat leakage. And the stanpatented live-loaded packing system lets

check and adjust packing without the needspecialized tools or complicated procedures.

A multiple-spring-return actuator that offers

safe capability and runs on a minimal air su(35 psig max) is standard. The Ranger hasquare shaft stem connection instead of a s

shaft so that it can be quickly and economiadapted to other types of actuators. In e

respect, the Ranger QCT exemplifies the Camotto

We Simply Make It Right!

CashcoRanger QCT

Process Valves

offers exceptionalerosion resistance

Also availableCORROSION TRIM

replaces standard stem andplug with highly

corrosion-resistant components

ABRASION

SLEEVE

provides 7-12dBAnoise attenuation

LOW-NOISE TRIM

replaces thestandard seal retainer

ANTI-CAVITATION TRIM

installs in minutes withoutplug or seat-ring changes

REDUCING TRIM

Also availableINTEGRAL

FLANGED BODY

FUGITIVE

EMISSIONS


8/12

Body sizes:

3", 4", 6", 8", 10", 12"Maximum Cv:

EZO from 179 to 7810Unlined from 243 to 8455

Materials:Body DI, CS, SSTStem 17-4PH, 316Disc SST

End connections:EZO flangeless, mates with ANSI 150# and 300#Unlined flangeless wafer, mates with ANSI 125#,150#, and 300#


Pressure drop:EZO to 150 psidUnlined to 300 psid

Seat leakage:

EZO Class VIUnlined 1% of maximum Cv

Options:P/P or I/P positioners, handwheel, positionswitches or solenoid

Body sizes:1/2", 1", 1-1/2" (521 only), 2"


Materials:Isostatically compacted TFE in SST body shell

End connections:150# and 300# flanged

Temperature range:

0F to +310FPressure drop:From 10 to 275 psid

Seat leakage:Class VI

The Model 520 Angle-Style and Model 521 Globe-Style Control Valves are sliding stem, bellows

sealed, pneumatically actuated valves designedto achieve the ultimate in long-term corrosivechemical service.

Our exclusive unibody forged-TFE construction is

unique in the industry and can handle evenabsolute vacuum applications. The one-piecebody is machined from a solid block ofisostatically compacted virgin TFE and encased ina cast 304 SST body shell to prevent distortion.

Construction includes a 100,000-cycle TFEbellows, quick change trim, replaceable plug, anddual stem seal design to minimize emissions.These valves can handle strong acids and bases,

most organics and industrial reagents.

The Models 520/521 are total TFE design for

unequalled corrosive chemical service.

CashcoModels 520/521

This valve was born to throttle.The Premier EZO

(short for easy opening) has superb throttlingcharacteristics and is designed to eliminate "pop-off" flow surges. It is available in a lined version orunlined in three body materials and six sizes from3" to 12". The Premier uses the same multi-spring

return actuator as the Ranger QCT and has asquare-shaft stem coupling thats easy to adapt toyour favorite actuator. This valve has a butterflydesign for demanding throttling service.

CashcoThe Premier

88

M O D E L 5 2 0( A n g l e - S t y l e )

M O D E L 5 2 1( G l o b e - S t y l e )

FUGITIVE

EMISSIONS


9/12

9

Models 988 and 989 are globe-style control

valves with pneumatic spring-return actuator.Originally designed for chemical plants andcorrosive service, they have large diameter

stems, special finishes on the stem and packingboxes, close-coupled guiding, and live-loaded

packing systems. Rugged construction, longevity,and low maintenance make these valves a

popular choice in industrial process applications.The main difference between the 988 and 989 are

in the face-to-face dimensions.

The Models 988 and 989 are versatile, heavy-duty throttling valves for general or corrosivechemical service.

Body sizes:3/4" (988 only), 1", 1-1/2", 2"


Materials:Body CS, 316L SST, Ni-Mo-Cr, CW-12MW (988 only)Trim 316L SST, HC-22

End connections:988 NPT, SW, separable flanges for Classes 150#, 300#,

and PN40989 separable flanges for Classes 150# and 300#Face-to-face:

988 ISA - 75.03 1984 (long)989 ISA - 75.20 1992 (short)


Pressure drop:TFE seat up to 400 psidMetal seat up to 740 psid


Options:High temperature service, NACE service, multiple packingvariations, stellited seat surfaces

CashcoModels 988/989

FUGITIVE

EMISSIONS

Model 988-MB is a modified version of our M988 designed to handle hazardous fluids

minimize fugitive emissions, it is fitted wimetallic bellows stem seal subassembly and

loaded secondary stem packing seal. pressure is from full vacuum to 200 psig.

model protects against fugitive emissions.

Body sizes:1", 1-1/2", 2"


Materials:Body CS, 316L SST, Ni-Mo-Cr, CW-12MW (988 only)Trim 316L SST, HC-22

End connections:NPT, SW, separable flanges for Classes 150#, 300#, and PN40Face-to-face:ISA - 75.03 1984 (long)


Pressure drop:TFE seat up to 400 psidMetal seat up to 740 psid


Options:High temperature service, NACE service, multiple packing

variations, stellited seat surfaces

CashcoModels 988-MB


10/12

The Model 987 precision globe-style chemicalvalve is the valve of choice to handle hostilefluids and environments as well as steam and

water. Its corrosion-resistant, ductile iron, field-reversible actuator, alloy body and trim materials,high pressure-drop capability, and exceptionallylow Cv rangeability make the Model 987 one ofthe most reliable and versatile valves in thechemical process industry. This valve is for

exceptional low Cv rangeability plus high pressurecapability.

Body sizes:1/2", 3/4", 1"

Maximum Cv:Six sizes for metal seat 0.276 to 6.95Three sizes for TFE seat 2.60 to 6.70

Materials:

Body and trim 316L SSTAlloy 20, Monel, Hastelloy C-22, and similar alloys

End connections:NPT, SW, and flangeless


Pressure drop:Metal seat up to 1500 psidTFE seat up to 400 psid

Seat leakage:Class IV or Class VI

Options:Stellite seating and guide bushingTop-mounted handwheel, P/P and I/P positioners,position switches

1010

CashcoModel 987


11/12

The Model 764P is a highly reliable versinexpensive pneumatic proportional pres

controller. It's available with cast iron or 316 sensing heads and can be set for direct or rev

action.

1

CashcoModel 764P

Controllers

The Model 764T is a pneumatic temperature

controller. Ideal for bleachers, cookers, heatexchangers and other applications that require

durable and accurate temperature control.

CashcoModel 764T

Signal Output:3-15 psig6-30 psig

Control Range:30" Vac through 2500 psig

Options:Diaphragm SealsTri-clamp Connection

Signal Output:3-15 psig

Control Range:-70F to +580F

Options:Thermal Bulb


12/12

Cashco, Inc.

P.O. Box 6 Ellsworth, KS 67439-0006

Ph. (785) 472-4461 Fax: (785) 472-3539

Cashco Canada, Inc.

Units 30 & 31 212 Wyecroft Road Oakville, Ontario L6K 3T9 Canada

Ph. (905) 842-4720 Fax (905) 842-2436

www.cashco com

Date post:	05-Apr-2018
Category:	Documents
Upload:	leandroperao5374
View:	214 times
Download:	0 times

cashco_controlvalvecat

Documents