+ All Categories
Home > Documents > Casting. Casting Let investment dry over night Let investment dry over night.

Casting. Casting Let investment dry over night Let investment dry over night.

Date post: 27-Jan-2016
Category:
Upload: geoffrey-matthew-wheeler
View: 226 times
Download: 3 times
Share this document with a friend
Popular Tags:
18
Casting Casting
Transcript
Page 1: Casting. Casting Let investment dry over night Let investment dry over night.

CastingCasting

Page 2: Casting. Casting Let investment dry over night Let investment dry over night.

CastingCasting

Let investment dry over nightLet investment dry over night

Page 3: Casting. Casting Let investment dry over night Let investment dry over night.

CastingCasting

Remove wood with nailRemove wood with nail

Page 4: Casting. Casting Let investment dry over night Let investment dry over night.

CastingCasting

Place can in kilnPlace can in kiln Melt and evaporate wax @ 1000`Melt and evaporate wax @ 1000`

Page 5: Casting. Casting Let investment dry over night Let investment dry over night.

CastingCasting Keep can funnel side down so no debris falls Keep can funnel side down so no debris falls

into funnel. into funnel.

¼ inch

Page 6: Casting. Casting Let investment dry over night Let investment dry over night.

(Weight of wax ring) (Weight of wax ring)

X 10 = Minimum X 10 = Minimum

(Weight of wax ring w/spruses)(Weight of wax ring w/spruses)

X 10 = MaximumX 10 = Maximum

CastingCasting

Page 7: Casting. Casting Let investment dry over night Let investment dry over night.

Put metal in Put metal in CRUCIBLECRUCIBLE

Page 8: Casting. Casting Let investment dry over night Let investment dry over night.

Put can in the centrifuge Put can in the centrifuge

Page 9: Casting. Casting Let investment dry over night Let investment dry over night.

Heat metal with Heat metal with OXYACETYLENE OXYACETYLENE

Page 10: Casting. Casting Let investment dry over night Let investment dry over night.

Wear sunglasses Wear sunglasses

Page 11: Casting. Casting Let investment dry over night Let investment dry over night.
Page 12: Casting. Casting Let investment dry over night Let investment dry over night.

CastingCasting

Page 13: Casting. Casting Let investment dry over night Let investment dry over night.

Put can in water for 5 minutesPut can in water for 5 minutes

Page 14: Casting. Casting Let investment dry over night Let investment dry over night.

Dig out investment into the trashDig out investment into the trash

Page 15: Casting. Casting Let investment dry over night Let investment dry over night.

Save metal castSave metal cast

Page 16: Casting. Casting Let investment dry over night Let investment dry over night.

Cut sprues w/ sprue cuttersCut sprues w/ sprue cutters

Page 17: Casting. Casting Let investment dry over night Let investment dry over night.

File

Sand

Buff

Page 18: Casting. Casting Let investment dry over night Let investment dry over night.

• Filing & Sanding Filing & Sanding 1515• BuffingBuffing10 10 • Comfort Comfort 55

Total Total 3030

Cast RubricCast Rubric


Recommended