Date post: | 12-Dec-2015 |
Category: |
Documents |
Upload: | wellingtonpguimaraes |
View: | 44 times |
Download: | 3 times |
www.gatorcases.com
2014 Full Line Catalog
Second Edition
Guitar Cases & Bags ...............................1Keyboard Cases & Bags ........................12Percussion Cases & Bags ......................14Band Cases & Bags ...............................23Rack Cases & Bags ................................26Rack Accessories ...................................35360 ARM ..................................................38Mixer Cases & Bags ...............................39Recording Cases & Bags ......................44Microphone Cases & Bags ...................45Speaker Bags & Covers .........................50DJ / Lighting Cases & Bags...................54Utility Cases & Bags ................................60Projector / Laptop Cases & Bags .........64LCD / Plasma Cases ..............................69Frameworks Stands ................................70Custom Casesw .....................................81
Table of Contents
FOLLOW GATOR ONLINE
All measurements are for reference only and aresubject to change or vary at any time. Please checkwww.gatorcases.com for updated information on all Gator products.
LIGHTWEIGHT CONSTRUCTIONThis method of construction is a blend between dense foam and nylon. The interiors are constructed with a dense EPS foam that is shaped to create a “hard” case. Then we cover the foam with high quality 600 denier nylon to make it appear similar to a bag yet have the rigidity of a hard case.
ABS - ACRYLONITRILE BUTADINE STYRENE ABS plastic has good impact resistance and impact absorption. It is easily formed to make all shapes and sizes. Gator uses ABS for the cases that are designed to offer strong hard case protection but do not need the extreme durability of PE.
PE - HIGH DENSITY POLYETHYLENEPE is a rugged plastic material which has a high resistance to impact. PE provides good performance in low temperatures where other plastics would crack and is highly resistant to both chemicals and moisture. Gator uses PE for the products that need to take the hardest beating on the road.
ROTO-MOLDThe rotational molding process is a high temperature, low pressure plastic forming process that uses heat and biaxial rotation (rotation on two axes) to produce hollow, one piece parts. Gator utilizes roto-molding for large format products that require form fitting capabilities.
DENIER NYLONA strong nylon material that is used in the construction of bags. The higher the number, such as 600-denier, the better the quality. 600-denier is highly tear-and-water-resistant.
EPS FOAM – EXPANDED POLYSTYRENE EPS is a thermal plastic material. It is formed to make a dense foam that is ideal for creating form fit protection for the product. Gator uses EPS to create case interiors and structures.
EVA ETHYLENE-VINYL ACETATEEVA is a polymer used to absorb physical shock. Gator uses EVA to give extra protection between foam and nylon along with forming tough contoured molded pieces.
G-TOUR™G TOUR™ is a Gator designed flight case with heavy-duty aluminum extrusions and rugged laminated plywood exterior.
GATOROLOGY A system of methods and principles for quality.
Look for the video icon to see which products have
a demo video online
www.gatorcases.com
Find The Perfect Fit By Using Our Online Find Your Case Tool
www.facebook/gatorcases www.youtube/gatorcases www.twitter/gatorcases
• Heavy-duty plywood construction with laminated exterior• Reinforced stackable ball corners• Black plush padded interior• Red recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial-grade hardware• Tongue & groove extrusion aluminum valance
Model Weight Total Interior LengthG-TOUR BASS 36 lbs 46”G-TOUR ELEC 24.2 lbs 40.13”G-TOUR LPS 30 lbs 40”
• Nearly indestructible military grade polyethylene outer shell• TSA approved locking center latch ideal for air travel• Black powder coated hardware and solid valance• Surface mounted impact diverting latch housing meets ATA specifications• Extended reach protective neck cradle• Crushed red velvet luxury plush interior• EPS protective foam interior nest
Nearly indestructiblemilitary grade outer shell
Ergo-grip injectionmolded handle
For detailed measurements visit www.gatorcases.com
G-TOUR™ ATA GUITAR FLIGHT CASES
ATA TSA GUITAR CASESModel Weight Total Int. LengthGPE-335-TSA 11.2 lbs 43”GPE-BASS-TSA 16 lbs 63”GPE-ELEC-TSA 13.6 lbs 39.5”GPE-DREAD-TSA 11.4 lbs 41.5”GPE-CLASSIC-TSA 10.6 lbs 40”GPE-LPS-TSA 10.4 lbs 42”GPE-SG-TSA 13 lbs 40.5"
01 Guitar
Check out the video of thisproduct on our website
DELUXE ABS MOLDED CASES• Rugged ABS plastic exterior• Heavy-duty aluminum valance • Through-bolted handle for extra strength • EPS foam protective interior with deep plush lining• Accessory compartment• Chrome plated lockable latches
Model Weight Total Int. LengthGC-335 11.5 lbs 42.5”GC-APX 11.1 lbs 50”GC-BANJO-XL 11.1 lbs 41”GC-BASS 12.6 lbs 47.5”GC-CLASSIC 11.1 lbs 40.25”GC-DREAD 11.1 lbs 41.75”GC-DREAD-12 11.1 lbs 43.63”GC-ELECTRIC-A 9.4 lbs 39.75”GC-ELEC-XL 9.8 lbs 42”GC-JUMBO 12.2 lbs 44”GC-LPS 8.4 lbs 40”GC-MANDOLIN 7.2 lbs 27.75”GC-SG 12.2 lbs 40.5”
• Rugged plywood construction with triple chrome-plated hardware• Plush lined foam padded interior with storage compartment • Lockable with ergonomically designed padded carrying handle• Distressed leather-like finish on all Vintage series cases• Traditional brown exterior and plush magenta interior on all Brown Series cases• GW-JAG designed to fit Jaguar, Jagmaster® and Jazzmaster® style guitars
DELUXE WOOD CASES
Chrome plated locking latch
Model Weight Int. Length Int. ColorGW-BASS 10.9 lbs 47” BlackGW-CLASSIC 10.8 lbs 41” BlackGW-DREAD 12.4 lbs 43” BlackGW-ELECTRIC 10.8 lbs 40.5” BlackGW-ELECT-VIN 12.5 lbs 40” TanGW-JAG 12 lbs 42” BlackGW-JUMBO 13 lbs 44.5” BlackGW-LPS 7.8 lbs 42” BlackGW-335-BROWN 12.5 lbs 44.5” MagentaGW-LP-BROWN 7.8 lbs 42” MagentaGW-SG-BROWN 7.8 lbs 40.5” Magenta
02Guitar
GW-SG-BROWN
GW-ELEC-VIN
GW-JAG
DELUXE WOOD CASES - JOURNEYMAN SERIES• Traditional wood case craftsmanship• Antique brass hardware• Royal blue crushed velvet interior• Pebble weave burlap exterior with espresso trim• Internal accessory compartment
For detailed measurements visit www.gatorcases.com
Check out the video of thisproduct on our website
03 Guitar
Model Weight Total Int. Length
GW-JM 335 12.5 lbs 44.5”GW-JM BANJO XL 13 lbs 41”GW-JM BASS 13 lbs 47”GW-JM DREAD 12.4 lbs 43”GW-JM ELEC 10.8 lbs 40.5”GW-JM LPS 7.8 lbs 42”GW-JM MANDOLIN 7.2 lbs 27.75”GW-JM RESO 11 lbs 41”GW-JM UKE-SOP 3.6 lbs 21.5"GW-JM UKE-CON 4.2 lbs 25"GW-JM UKE-TEN 4.8 lbs 27.5"
• Perfect cross between hard case & gig bag• Exterior is covered with rugged nylon• Internally constructed of dense EPS foam • Interior is covered in soft plush with foam support for the neck• Two accessory compartments• Nylon web carrying handle• Comfortable removable shoulder strap
Model Weight Total Int. LengthGL-AC-BASS 8.2 lbs 50.5”GL-APX 6.1 lbs 40.25”GL-BANJO XL 6.1 lbs 41”GL-BASS 7.7 lbs 47.5”GL-CLASSIC 6.1 lbs 41”GL-DREAD 6.8 lbs 43"GL-ELECTRIC 6.9 lbs 39.5”GL-JUMBO 9 lbs 44.63”GL-LPS 8 lbs 42.25”GL-MANDOLIN 6 lbs 27.75”GL-SG 8 lbs 40.38”
LIGHTWEIGHT GUITAR CASES
04Guitar
• Durable plywood construction with Tolex laminated covering• Matching handle and locking latches• Plush padded interior with accessory compartment • GWE-JAG fits Jaguar, Jagmaster® and Jazzmaster® style guitars• GWE-ELEC-WIDE fits PRS® and wide body style guitars• GWE-335 fits semi-hollow guitars such as Gibson 335®
• GWE-LPS-BLK fits single cutaway guitars such as Gibson Les Paul®
Model Weight Total Int. Length
GWE-335 12 lbs 44.5”GWE-ACOU-3/4 7 lbs 38”GWE-BASS 9.6 lbs 47”GWE-CLASSIC 8 lbs 40.75”GWE-DREAD 12 12 lbs 43.5”
Model Weight Total Int. Length
GWE-ELEC 8.4 lbs 39.5”GWE-JAG 9 lbs 42”GWE-LPS-BLK 10 lbs 40”GWE-ELEC-WIDE 9 lbs 35.5”
HARD-SHELL GUITAR CASES
Dense EPS foam providesdurable protection
For detailed measurements visit www.gatorcases.com
• Ultra-thick padded sidewalls• Super soft micro-fleece interior• Protective rain cover • Multi-adjustable, removable backpack straps• Body Block internal shock absorber• Tablet and sheet music pockets• Internal cable management
PRO-GO ULTIMATE GIG BAG
Model Weight Total Int. LengthG-PG ELECTRIC 7 lbs 40”G-PG BASS 9 lbs 48”G-PG ELEC 2X 12 lbs 40”G-PG BASS 2X 14 lbs 48”G-PG ACOUSTIC 10 lbs 44”G-PG CLASSIC 8.5 lbs 41”
05 Guitar
Fully Adjustable Backpack Straps Adjust Height Of
Bag While On The Back
Ample Storage For Tablet, sheet
Music AndAccessories
Protective Rain Cover Stores Inside Zipper
Pocket On Rear Of BagPadded Adjustable Neck Cradle
Padded Adjustable Body Block Shock Absorber
Check out the video of thisproduct on our website
Super soft micro-fleece interior
Shown with built-in rain
cover
NEWMODEL
06Guitar
• G-FLEX Padding on all sides• Patent Pending Pick-Clip holds "emergency" pick • Padded backpack style straps• Contour back padding for comfort• Large Exterior pocket• Internal headstock and bridge reinforcement
to prevent wear
Model FitsGB-4G-ACOUSTIC Acoustic guitarsGB-4G-BASS Bass guitarsGB-4G-BASSX2 2 Bass guitarsGB-4G-CLASSIC Classic guitarsGB-4G-ELECTRIC Electric guitarsGB-4G-ELECX2 2 Electric guitarsGB-4G-UKE CON Concert UkuleleGB-4G-UKE SOP Soprano UkuleleGB-4G-UKE TEN Tenor Ukulele
GATOR 4G GIG BAG
• Nylon construction with 10mm internal padding• Reinforced interior at headstock & bridge• Exterior pocket for accessories & comfortable
shoulder strap • Extreme model fits Gibson Flying V®, Explorer®, Dean
ML®, Warlock® and other extreme shaped guitars• GBE-UKE-TEN fits Tenor ukuleles• GBE-UKE-CON fits Concert ukuleles• GBE-UKE-SOP fits Soprano ukuleles
Model Total Int. LengthGBE-AC-BASS 49.5”GBE-BASS 47”GBE-CLASSIC 40.5”GBE-DREAD 41.5”GBE-ELECT 38”GBE-EXTREME-1 47.5”GBE-MINI-ACOU 38.5”GBE-MINI-ELEC 38”GBE-UKE-TEN 26.75”GBE-UKE-CON 25.25”GBE-UKE-SOP 22"
ECONOMY GUITAR GIG BAG
Luna Rex Before Gator
Luna Rex After Gator
Double guitar bagholds 2 guitars in separate
compartments
Emergency guitar pick holder built-in
to zipper pull
For detailed measurements visit www.gatorcases.com
NEWMODELS
07 Guitar
Model Weight
G-BONE 3.5 lbs
• USA made rigid polyethylene pedal board which can accommodate up to 5 stomp boxes• 9v daisy chain power supply• Hook and loop angled surface for pedal mounting• Convenient carry bag with accessory pocket
th
e
bone
Model Weight
G-MINI-BONE 2 lbs
• USA made rigid polyethylene pedal board which can accommodate up to 3 stomp boxes• Hook and loop angled surface for pedal mounting• Convenient “cinch” tote carry bag with accessory pocket
Model Weight Bag
G-MEGA-BONE 9 lbs PaddedG-MEGA-BONE-W 12 lbs Padded with handle and wheels
• Rigid polyethylene pedal board which can accommodate up to 10 stomp boxes• Ergo-friendly arched shape• 2 larger surfaces for wah, and volume type pedals • 9v daisy chain power supply• Hook and loop angled surface for pedal mounting• Convenient padded lightweight carry case• Available with or without wheels and tow handle
G-MEGA-BONE-W
“THE BONE” PEDAL BOARD
“MEGA BONE” PEDAL BOARD
“MINI BONE” PEDAL BOARD
Fits up to 5 stomp boxes
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Artist Paul Ranieri with his Gator Mega bone
08Guitar
Model WeightG-BUS-8 2 lbs
• Multi-output power supply for guitar effects pedals with short circuit protection and reset• Heavy-duty aluminum housing• 4 holes for mounting to Gator Pedal Boards or any other pedal board• Eight (8) 9v outputs & three (3) 18v outputs• Can power up to 11 standard stomp box pedals• 1500 milliamp power supply• Nine (9) 24” cables included
• Pro grade shock absorbing interior with cable storage• Plywood fabricated with aluminum valance• 3M Dual lock fastener for pedal installation• Heavy-duty Gator signature hardware• G-TOUR PEDALBOARD-LGW includes in-line wheels
Model Board Dimensions Board FitsG-TOUR PEDALBOARD-SM 11" x 17" 8-10 PedalsG-TOUR PEDALBOARD-LGW 11" x 24" 10-14 Pedals
G-TOUR PEDALBOARD-LGW
• Designed to accommodate most multi-effects pedal boards• Durable Nylon exterior• 1/2” protective padded interior• Large accessory pocket for cables• Adjustable shoulder strap and ergo-grip carry handle
Model Internal DimensionsG-MULTIFX-1110 11.25” x 10.25” x 3.75”G-MULTIFX-1510 15.5” x 10.5” x 3.75”G-MULTIFX-2411 24.25” x 11.5” x 4”
MULTI-FX BAGS
G-TOUR™ PEDAL BOARD
PEDAL BOARD POWER SUPPLY
For detailed measurements visit www.gatorcases.com
Includes in-store display packaging
G-TOUR PEDALBOARD-SM
Cable storage under the
removable pedal board
09 Guitar
• Fabricated plywood construction• EVA Ultra-Dur interior protection• Heavy-duty Gator signature hardware• Small tour case for “mini” guitar head amplifiers - 13" x 7" x 7.5"• Medium tour case for “mini” guitar head amplifiers 7.5" x 10" x 10"• Large tour case for “mini” guitar head amplifiers 20" x 12" x 12"
Model FitsG-TOURMINIHEAD1 Adjustable interior to fit smaller “mini” guitar heads like the Orange Tiny Terror™G-TOURMINIHEAD2 Adjustable interior to fit medium sized “mini” guitar heads like the Marshall JTM1H™G-TOURMINIHEAD3 Adjustable interior to fit larger sized “mini” guitar heads like the Blackstar HT-5RH™
Check out the video of thisproduct on our website
Model Weight Pedal SurfaceGPT-BLACK 7 lbs 16.5” x 12”GPT-BL-PWR 8 lbs 16.5” x 12”GPT-PRO 17.5 lbs 30” x 16.5”GPT-PRO-PWR 17.5 lbs 30” x 16.5”
• Plywood pedal board covered in Tolex• Pedal board comes with carry handle which slides into a black rugged nylon padded carrying case• Pedal board has access holes for cables to run below board to utilize 4 supplied mounting screws for most multi-output power supplies• Exterior pocket for cables• Face of pedal board covered with Velcro® for attaching pedals • Attachment Velcro® included• Powered version comes with Gator’s G-BUS-8 multi-output power supply
G-BUS-8 Mounted under pedal board on powered
version only
G-TOUR™ MINI HEAD CASE
PEDAL TOTES
GPT StandardVersion has a
16.5” x 12” pedal board
GPT-PRO Version has a 16.5” x 30” pedal board
The band Stolen Babies loves their G-Tour Pedal Board
10Guitar
Model Weight Interior DimensionsG-112A 26.5 lbs 25” x 19.5” x 12”G-212A 39.7 lbs 30” x 24” x 12”
• Reinforced hard top for supporting amplifier on stage• Rails to prevent amp from vibrating off the stand during performance• Rugged nylon material over 1/2” wood frame• Interior is 20mm foam covered in Tricot• Tow-handle & wheels• External accessory pocket
• Ballistic nylon exterior over wood frame• 20mm interior foam covered in Tricot• Storage pocket for pedal controllers and channel switching pedals• Web side carry handles• Tow-handle & wheels
Model Weight Interior DimensionsG-901 27.6 lbs 30” x 12.5” x 10.5”
Model Weight Interior Dimensions
Internal height with straps extended
G-112-ROTO 12.5 lbs 23.5” x 12.5” x 16” 21”G-212-ROTO 13.6 lbs 26.75” x 12.5” x 16” 21”
• Amp case fits most popular combo amps• Nearly indestructible roto mold design• Amp sits securely on top of case during use• Two wrap around straps with clips to secure lid to base during transport• Frame height expands 16” to 21”• Heavy-duty 2.5” swivel casters (2 locking)
ROTO MOLDED AMP CASES
LIGHTWEIGHT AMP HEAD CASE LIGHTWEIGHT AMP CASES
Rugged tow-handle
Check out the video of thisproduct on our website
Open top design provides access to handle
for easy transport
11 Guitar
• Adjustable flight case fits most 4x12 size guitar speaker cabinets like the Marshall 1960 series• 3/8 inch plywood construction• Ultra-Dur EVA interior padding• Front lid "Live in case" design with hinged rear access allows cabinet to be used while in the case• Rear cable port• Heavy-duty hardware and 4 casters
Model Interior DimensionsG-TOUR HEAD 30.31" x 10.28" x 12.48"
• Tour case for amp head, fits most popular guitar amplifier heads like the Marshall JCM series• "Lift off Lid" design allows amp head to remain in base during use• Ultra-Dur EVA interior padding• 3/8 inch plywood construction with heavy duty hardware
Model Interior DimensionsG-TOUR AMP112 25.6" x 22.2" x 13.1"G-TOUR AMP212 30" x 23.75" x 14.1"
• Tour case for combo amps• G-TOUR AMP112 is an adjustable fit case for most 1x12 size guitar amps• G-TOUR AMP212 is an adjustable fit case for most 2x12 size guitar amps • 3/8 inch plywood construction• Heavy-duty interlocking interior padding• Heavy-duty hardware• "Lift off lid" design allows the amp to remain in base during use• 4 casters
Model Interior DimensionsG-TOUR CAB412 30.5" x 30.5" x 15"
G-TOUR™ GUITAR CABINET CASES
G-TOUR™ AMP HEAD CASES
G-TOUR™ AMP CASES
Rear cable access behind flip-out logo plate
Rear hingedaccess door
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Includes numerous adjustable foam wedges to fit a wide
variety of guitar amps
G-Tour setup of artist Mike Adkins of Uncle Kracker
12Keyboard
• Heavy-duty plywood construction with laminated exterior• Tongue & groove extrusion aluminum valance• Ultra-Dur interior protection with unique wedge and block design for interior customizing• Reinforced stackable ball corners• Red recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial-grade plated hardware• Adjustable foam pads in lid• Built-in recessed wheels for easy transport
Model Interior DimensionsG-TOUR 61 V2 44” x 17.38” x 6”G-TOUR 76 V2 51.25” x 18” x 6”G-TOUR 88 V2 59” x 19” x 6.63”G-TOUR 88 V2 SLIM 59” x 15” x 6”G-TOUR 88V2XL 59” x 20” x 7.5”
G-TOUR™ FLIGHT KEYBOARD CASES
• Nearly indestructible polyethylene construction• Unique wedge and block design for interior customizing• 2 TSA locking latches with impact diversion dishes• Recessed in-line wheels, 200 lb weight capacity *not included on GKPE-49-TSA• Two rubber gripped handles with 130 lb weight capacity• Additional spring-loaded handle on 88 note sizes for “two man” carry configuration• Solid aluminum valance with black powder coated finish
Model Interior DimensionsGKPE-49-TSA 36.5” x 12.5” x 4”GKPE-61-TSA 44” x 17.38” x 6”GKPE-76D-TSA 51.25” x 20” x 8”GKPE-76-TSA 51.5” x 18” x 5.5”GKPE-88SLIM-TSA 54” x 15” x 6”GKPE-88SLXL-TSA 57” x 15” x 6”GKPE-88-TSA 59” x 19” x 6.63”GKPE-88D-TSA 59" x 19" x 7"
ATA TSA KEYBOARD CASES
• Protects keyboard from dust • Constructed of stretchy Lycra® / Spandex®
• Adjustable shock cord for snug fit• Hand washable
Model DescriptionGKC-1540 Stretches to fit most 61 and 76 note keyboardsGKC-1648 Stretches to fit most 88 note keyboards
STRETCHY KEYBOARD COVERS
TSA LockingLatch
Check out the video of thisproduct on our website
Adjustable cord for snug fit on keyboard
Wedge and block system for customizing the interior to fit your needs
Check out the video of thisproduct on our website
Artist Will Blades Artist Matt Kelly
13 Keyboard
Model Interior Dimensions
GK-49 38” x 15” x 5.5”GK-61 43” x 17.5” x 6.5”GK-61-SLIM 41.5” x 12.5” x 5”GK-76 51.5” x 18” x 6.25”GK-76-SLIM 51” x 12.5” x 5”
• Rugged nylon construction with Polyethylene reinforced interior frame• Interior is lined with Tricot & soft foam • Fully adjustable padded straps to secure keyboard in place during transport• Large accessory pockets on outside for pedals and cables• Built-in wheels with tow handle & skid bars
Model Interior DimensionsGK-88 57.5” x 18” x 6”GK-88-SLIM 54” x 15” x 6”GK-88-SLXL 59” x 15” x 6”GK-88-XL 59” x 18” x 6”
• Heavy-duty rugged nylon construction• Adjustable padded secure straps to hold keyboard in place during transport• Large exterior accessory pocket• Reinforced comfort riveted carry handles
Model Interior DimensionsGKB-49 36.5” x 13.75” x 4.5”GKB-61 43” x 17.5” x 6.5”GKB-61 SLIM 41.5” x 12.5” x 5”GKB-76 51.5” x 18” x 6.25”GKB-76 SLIM 51” x 12.5” x 5”
Model Interior DimensionsGKB-88 57.5” x 18” x 6.25”GKB-88 SLIM 53” x 15” x 6”GKB-88 SLXL 59” x 15” x 6”GKB-88 XL 59” x 18” x 6”
• Durable Nylon bag for micro keyboards• Reinforced comfort handles• Comfortable shoulder strap• Large exterior accessory pocket
Model Interior DimensionsGK-2110 22.5” x 11.5” x 4”
LIGHTWEIGHT KEYBOARD CASES
KEYBOARD GIG BAGS
• Rugged Nylon exterior• 10mm padding• Simple envelope-style bag for entry level portable keyboards• Nylon web handles
Model Interior DimensionsGKBE-49 38” x 15” x 5”GKBE-61 43” x 17.5” x 5”GKBE-76 51” x 18” x 5”GKBE-88 59” x 19” x 5”
ECONOMY KEYBOARD BAGS
MICRO KEYBOARD BAG
Check out the video of thisproduct on our website
For detailed measurements visit www.gatorcases.com
14Percussion
ELITE SERIESThe revolutionary Elite Air Series design features an oversized case with tailor-made contours and shaped foam strips to securely cushion each drum. The drum rests in the middle, away from side walls, which provides a snug fit and eliminates the need for foam. The unique shape is designed to accommodate most suspended mounting brackets without “upsizing” and comes with a limited, lifetime warranty against cracking.
The Elite Air Combination Tom case blends Elite’s optimum protection with the convenience of one case. The contoured divider allows smaller toms to securely sit atop larger toms and is available for 10” & 12” and 12” & 13” tom combinations.
What makes the Elite Series Different? The Drum Floats in the Center of the Case!
Model Case Diameters AvailableTOM CASE 8” - 10” - 12” - 13” - 14” - 15” - 16” - 18”BASS DRUM CASE 18” - 20” - 22” - 24”SNARE CASE 10” - 12” - 13” - 14”COMBO CASE 10” / 12” - 12" / 13"
Rugged comfortable carry handles
Heavy-duty buckles lock the lids in place
Combo Tom Case includes contoured divider for secure
stacking
• Patended suspension system of molded-in suspension platforms with foam rubber pads center the drum and suspend it, by contacting the rim at only eight points. This floats the drum inside the case and creates air-space around the drum shell, hardware, and heads• No pressure on the heads or shells means better tuning stability• 2" wide web strap and YKK side-release buckle. Rated at 350lbs tensile strength• Lightweight rotationally molded polyethylene plastic • The octagonal shape creates extra room inside case to accommodate suspension mounts, hardware, and strainer throw-offs. • Flat outer faces which provide a stable base for resting the case. No more rolling around• Extra side crush protection; the top edge of the bottom shell is captured in the lid to prevent side impact from reaching the drum• Outer case shell design includes ribs for added strength and secure stacking
Model Snare Case Diameters
Snare Depth
GP-EVOL13/1405SD 13" or 14" 5"GP-EVOL13/1405.5SD 13" or 14" 5.5"GP-EVOL13/1406SD 13" or 14" 6"GP-EVOL13/1406.5SD 13" or 14" 6.5"GP-EVOL13/1407SD 13" or 14" 7"
EVOLUTION SNARE DRUM CASE SERIES
Air Space
15 Percussion
Recognized as the industry standard rotationally molded drum cases, Protechtor Cases’ Classic Seriesprovides strength, durability and simplicity for almost any drum size. The rotational molding process givesadded strength and durability to case corners and provides water resistance that non-roto molded cases can’t match. Custom depths and colors are available. All Protechtor Cases come with alimited, lifetime warranty against cracking.
Model Case Diameters AvailableTOM CASE 8” - 10” - 12” - 13” - 14” - 15” - 16” - 18”BASS DRUM CASE 18” - 20” - 22” - 24” - 26” - 28” - 30” - 32”SNARE CASE 10” - 12” - 13” - 14”COMBO CASE 10” / 12”
The Multi-Tom case features rounded pockets to make roomfor floor tom leg mounts. The 34” maximum depthallows for any combination of floor toms (up to 16”diameter), mounted toms and/or snares.
CLASSIC SERIES
01
Available for Classic, Accessory, World Percussion and Marching Percussion Cases!
Gator Chop Shop
• Durable nylon construction • 10mm padded and lined interiors • Comfortable carrying straps • Collapsible compact design
PADDED DRUM BAGSStandard Series
Model Description
GP-0808 Fits 8” x 8” DrumsGP-1008 Fits 10” x 8” DrumsGP-1009 Fits 10” x 9” DrumsGP-1209 Fits 12” x 9” DrumsGP-1210 Fits 12” x 10” Drums
GP-1305.5SD Fits 13” x 5” DrumsGP-1310 Fits 13” x 10” DrumsGP-1311 Fits 13” x 11” Drums
GP-1405.5SD Fits 14” x 5.5” DrumsGP-1406.5SD Fits 14” x 6.5” Drums
GP-1412 Fits 14” x 12” DrumsGP-1414 Fits 14” x 14” DrumsGP-1614 Fits 16” x 14” DrumsGP-1616 Fits 16” x 16” DrumsGP-1816 Fits 18” x 16” Drums
GP-2016BD Fits 20” x 16” DrumsGP-2018BD Fits 20” x 18” DrumsGP-2216BD Fits 22” x 16” DrumsGP-2218BD Fits 22” x 18” DrumsGP-2418BD Fits 24” x 18” Drums
GP-FUSION-100 Kit fits fusion style drum setGP-STANDARD-100 Kit fits standard style drum set
Fusion Set Includes:14” x 5.5” Snare Bag10” x 9” Tom Bag12” x 10” Tom Bag14” x 14” Floor tom Bag22” x 18” Bass drum Bag
Standard Set Includes:14” x 5.5” Snare Bag12” x 10” Tom Bag13” x 11” Tom Bag16” x 16” Floor tom Bag22” x 18” Bass drum Bag
PUORGR YERE BLEB PG
RG
G
G
Grey Granite Red Granite Purple Granite Black Red Blue Green Yellow Orange Purple
For detailed measurements visit www.gatorcases.com
16Percussion
• Drum bag with divider system for electronic drum set• Storage for electric drum pads, cymbal pads, electric drum set brain, module, and accessories• 25mm padded tricot interior• 2 Nylon web carry handles and padded removable adjustable shoulder strap• Available with or without wheels
Model Style Interior DimensionsGP-EKIT2816-B Standard 28” x 16” x 16”GP-EKT2816-BW Rolling 28” x 16” x 16”GP-EKIT3616-B Standard 36” x 16” x 16”GP-EKIT3616-BW Rolling 36” x 16” x 16”
ELECTRONIC DRUM KIT BAGS
The Economy and Deluxe cymbal cases feature a strapless design and wing nutsystem to securely hold cymbals in place. Molded handles offer durable andcomfortable carrying options. The Deluxe Case features recessed wheels andan extended handle that folds away when not in use.
Model DescriptionGP-PC302 Classic Cymbal CaseGP-PE302 Elite Deluxe Cymbal Case w/ Wheels
CYMBAL CASES
Standard Series Features:• Rugged nylon exterior with protective foam, fur-lined interior • Fits up to eight cymbals up to 22” diameter • Individual plush-lined dividers• Comfortable shoulder strap
Artist Series Features:• Ultra-soft synthetic wool interior nesting• Ergo-grip reinforced handle and removable shoulder strap• Individual wool lined dividers• Fits up to eight cymbals up to 22” diameter
Model DescriptionGP-ART-CYM Artist Series Cymbal Bag
GP-12 Standard Series Cymbal Bag
Cymbal Back Pack Features:• Heavy-Duty padded cymbal backpack to hold up to six 22" or 24" cymbals• Large front pocket to hold your loaded stickbag• Ultra padded adjustable backpack straps• 3 additional storage pockets• Removable padded shoulder strap & wrap padded handle• Heavily padded back section• PVC lined divided interior with reinforced bottom
CYMBAL BAGS
ModelGP-66
• Fits double bass pedals • 30mm spongy foam lining with synthetic fur lining • Exterior accessory pocket • Removable shoulder strap and carry handles
BASS DRUM PEDAL BAG
Model DescriptionGP-CYMBAK-22 Cymbal Backpack Fits 22" CymbalsGP-CYMBAK-24 Cymbal Backpack Fits 24" Cymbals
Check out the video of this
product on our website
17 Percussion
ModelGP-DRUMCART
• Rugged nylon drum hardware bag• 25mm steel cart construction• 100 pound capacity in line-style wheels• Exterior accessory pockets• Bag section can be removed from rolling cart
ROLLING DRUM CART
ModelGP-40
• Durable nylon construction• 20mm foam protection with synthetic fur lining • Comfortable web handles and shoulder strap • Adjustable Velcro® interior dividers and exterior storage pocket
PERCUSSION ACCESSORY BAG
Model Interior DimensionsGP-HDWE-1436 14” x 36”GP-HDWE-1350 13” x 50”
GP-HDWE-1436W 14” x 36”GP-HDWE-1436-PE 14” x 36”GP-HDWE-1846-PE 18” x 46”
All Feature:• Durable 600-Denier nylon construction • Reinforced carry handles and synthetic fur-lined interiorGP-HDWE-1436 & GP-HDWE-1350 Feature:• 10mm padding
GP-HDWE-1436W Features:• Wheels & tow handle • Solid bottom for support
GP-HDWE-1436-PE & GP-HDWE-1846-PE Feature:• Rigid polyethylene base• Recessed roller wheels • Padded interior Velcro® tie down straps
PERCUSSION HARDWARE BAGS
Stick /Mallet Bag
Artist Series
Artist Series Bags Feature:• Holds drum sticks and percussion mallets • Synthetic wool ultra-soft interior• Straps for attaching to floor tom
STICK BAGS
Stick / Mallet Bags Feature:• Holds drum sticks and percussion mallets • 25mm foam padding with synthetic fur lining • Straps for attaching to floor tom
Model DescriptionGP-ART-007 Deluxe Percussion Stick BagGP-007A Percussion Stick Bag
Removable rolling cart
Ample exterior pockets for accessories
Adjustable Velcro® interior dividers
Gator artist Jimmy Elcock
18Percussion
World percussion cases are specifically designed with the uniqueness of each instrument inmind. Conga and djembe cases feature contoured lids and bottoms for all sizes. Deluxe steeldrum cases incorporate special foam and dividers for optimal protection. Additional casesinclude timbales, bongos, cajon, frame drums and tambourines.
Timbale
Deluxe andStandard Bongo
Conga With Wheels
Model DescriptionGP-PC307 Bongo CaseGP-PC307D Deluxe Bongo CaseGP-PC305 Conga CaseGP-PC305W Conga Case w/ wheelsGP-PC2217PD 22” Steel Drum Case
GP-PC2217DP 22” Deluxe Steel Drum CaseGP-PC2617PD 26” Steel Drum CaseGP-PC2617DP 26” Deluxe Steel Drum CaseGP-PC310 Upright Timbale Case w/ WheelsGP-PC317 Timbales Case w/ DividerGP-PC1616 16x16 Case Fits Cajon
Djembe
Tambourine
WORLD PERCUSSION
• Durable rugged nylon construction • Padded interior with reinforced bottom• Comfortable carrying straps and shoulder strap • Adjustable interior strap helps to fit many different sizes up to 16” wide at base, 13” wide at top and 32” high• Wheels and drag handle for easy transport
ModelGP-CONGA-W
Model Interior Dimensions
GP-66 18” x 10” x 7”
• Fits most bongos • Synthetic fur lining • 30mm spongy foam lining • Exterior accessory pocket • Carry handles & removable shoulder strap
ROLLING CONGA BAG BONGO BAG
Reinforced bottom for extra protection
19 Percussion
Model Description Dia. / Length Depth WidthGP-PC300 Accessory Case 45” 12” 19”GP-PC301 Trap Case 30” 24” 16”GP-PC303MS Multi Snare Case 17” 29” 17”GP-PC303 Upright Accessory Case 17” 29” 17”GP-PC304 Compact Accessory Case 36” 12” 16”GP-PC304UC Ultra Compact Accessory Case 36” 16” 7”GP-PC304W Compact Accessory Case With 2 Wheels 36” 16” 12”GP-PC304W-4 Compact Accessory Case With 4 Wheels 36” 16” 12”GP-PC304WU Upright Accessory Case With Wheels 36” 16” 12”GP-PC308 Super Compact Accessory Case 30” 12” 14”GP-PC308RW Super Compact Accessory With Removable Wheels 30” 14” 12”GP-PC308U Super Compact Accessory Case 30” 7” 14”GP-PC308RW Super Ultra Compact Accessory Case With Removable Wheels 30” 14” 7”GP-PC308UW Super Ultra Compact Accessory Case With Wheels 30” 14” 7”GP-PC308W Super Compact Accessory Case With Wheels 30” 14” 12”GP-PC309 Trap MOD Case 24” 12” 24”GP-PC311 Drum Rack Case Fits Racks Up To 52” 52” 18” 10”GP-PC314 Mini Compact Accessory Case 25” 10” 12”GP-PC400A Accessory Case 45” 16” 7”GP-PC400AW Accessory Case with Wheels 45” 16” 7”
Small, medium and large cases are available for any type of equipment and come with a variety of wheel packages for easy transportation in almost every vehicle. The rotational molding process provides unmatched durability, strength and protection.
Multi Snare CaseGP-PC303MS
Super Compact Accessory w/WheelsGP-PC308UW
Trap MODThe Trap MOD Case is a modular typecase for cymbals and an assortment ofaccessories such as snare drums, stickbags or pedals. The Trap MOD comesstandard with wheels and a fold outhandle for convenient transportation.
Rack CaseThe Unique I-shaped design holds the rackbase in place and accommodates racks upto 52” with typical clamps and accessories.
Trap CaseGP-PC301
Multi Snare Case The square shape allows snare throw offs and gates to fit into corners while providing a snug fit and protection for any combinationof snares and/or mounted toms up to acumulative depth of 29”. Includes two (2)dividers to accommodate multiple drum diameters.
Trap MOD Case GP-PC309
Drum Rack CaseGP-PC311
GP-PC300 Accessory Case
GP-PC304 - Compact Accessory Case
ACCESSORY CASES
Modular pieces allow case to hold a large variety of
accessories and equipment
Heavy-duty buckles and straps hold the lids snug during
transport
For detailed measurements visit www.gatorcases.com
20Percussion
• All aluminum construction with black powder coated finish to blend with most band uniforms and give the carrier a stealth look• Entire line will work with any drum on the market • Replacement hardware such as nuts and bolts can be purchased at any hardware store
MARCHING CARRIERS
• This style has more advanced adjustability in shoulders allowing a better fit for smaller body types• Constructed for entry level as well as professional model drums• Standard foam padding on shoulders and belly-plate
T-TOP STYLE CARRIERS
Model DescriptionGP-XLC-MSDC2 Snare CarrierGP-XLC-MBDC2 Bass CarrierGP-XLC-MQSC2 Quad-Sextet Carrier
• Heavy-duty aluminum vest carrier• Available with two options for padding: • Standard neoprene foam padding on shoulders and belly plate • Removable washable padding for shoulders and belly-plate and back-strap to secure vest and disperse weight to the body and hips and off the back
ALUMINUM VEST CARRIERS
Model DescriptionGP-XLC-MSDC1 Snare Carrier With Permanent FoamGP-XLC-MBDC1 Bass Carrier With Permanent FoamGP-XLC-MQSC1 Quad-Sextet Carrier With Permanent FoamGP-XLC-MSDC1R Snare Carrier With Removable PaddingGP-XLC-MBDC1R Bass Carrier With Removable PaddingGP-XLC-MQSC1R Quad-Sextet Carrier With Removable Padding
Available with removable, washable padding for shoulders and belly-plate and back-strap
to secure vest and disperse weight to the body and hips and off the back!
*Only available on Aluminum vest carriers series
Removable Padding*
21 Percussion
This revolutionary spring-loaded, quick-release systemprovides quick bass drum mallet placement for 14 and 16inch deep marching bass drums. The attractive and strongblack anodized finish creates a slick yet subtle appearancewith a strong aluminum edge for optimal protectionagainst rim clicks.
Patent #7,164,074Model DescriptionGP-XLA-CLAW Bass Drum Mallet Holder
Model DescriptionGP-XLA-MHH Marching Hi-Hat AttachmentGP-XLA-MCA Marching Cymbal AttachmentGP-XLA-MAA Marching Accessory Attachment
ACCESSORY MOUNT
The Accessory Mounting Bracket securely mounts to the rim of any free floating drum and has been redesigned to provide a more compact and stable attachment for percussion accessories without muffling shell resonance. The universal F-clamp design provides multiple rod applications for hi-hats, cymbals, cowbells, jam blocks and ribbon crashers. Each rod comes with appropriate mounts, felts and a memory lock to make set-ups quick, easy and consistent with maximum stability.
HI-HAT CYMBAL
ACCESSORY *Instruments not included
GP-XLA-MHH GP-XLA-MHH GP-XLA-AMCA
GP-XLA-MAA GP-XLA-MAA GP-XLA-MAA
GP-XLA-MHH-BKF-clamp attachment
ACCESSORY ADD-ONS
Black StrapClassic EZ Roll DeluxeHandle w/ Wheels Kit
Classic EZ Roll Deluxe Handle
Elite EZ Roll Deluxe Handle
Elite EZ Roll Wheel Kit
Conga Case Wheel Kit
Band Student Hailey Schneider
Band Student Soren AmstutzBand Student Mason Thomas
Northrop High School, Fort Wayne Indiana Marching Band
22Percussion
Logging as many touring miles as any musical equipment,marching percussion drums, carriers and accessories mustbe durable enough to withstand the rigors of crosscontinental travel. Protechtor Cases are backed by alimited lifetime warranty and available for all marchingpercussion equipment.
Model DescriptionGP-PC204 Large Quad/Quint Case w/Wheels-BlackGP-PC234 SM. Trio/Quad Case-Fits 8”-13” Drums-BlackGP-PC217 Small Marching Snare Case-BlackGP-PE217 Elite Marching Snare Case-BlackGP-PC219 Large Marching Snare Case
Model DescriptionBass Drum Cases Bass Drum Cases Available for 16” to
32” Bass Drums
The Elite Marching Snare Caseincorporates the Elite Air Series designto provide ultimate protection withoutthe need for foam. Fold out handlesand oversized wheels come standard.
MARCHING SERIES
Elite Marching Snare Case
Rugged strap and heavy-duty buckles keep everything in
place
• Holds practice bell set & concert snare • Holds sticks and related accessories • Snare bag detaches from bell bag for separate use• Each bag includes own set of adjustable backpack straps• Removable tow handle and wheels
ROLLING BELL/SNARE BAGHandle and wheels are
removable allowing bag to be carried as
backpack
ModelGP-SNR BELL KIT-A
Backpack straps on both bags allow them to be
used separately
Gator artist Rich Redmond
Gator artist Christian Pepin
23 Band
• Deluxe ABS plastic exterior with heavy-duty aluminum valance• Triple chrome-plated hardware with lockable latches• Form-fitted EPS interior with deep plush lining• Internal storage compartments (on some models)• D-rings for adding a shoulder strap
ModelGC-ALTO SAX
GC-ALTO-RECTGC-TENOR SAXGC-CLARINET
DELUXE MOLDED ABS BAND & ORCHESTRA CASES
ModelGC-FLUTE-B/C
GC-FRENCH HORNGC-TROMBONE
GC-TRUMPET
ModelGC-VIOLIN 4/4
DELUXE MOLDED VIOLIN CASE
• ABS plastic exterior and heavy-duty aluminum valance• Plush foam lined interior with chin rest pouch and accessory pocket • Stackable with D-rings for adding strap• Holds 2 bows• Lockable latches
Form-fitted EPS, plush lined interior cradles the
instrument
GC-FRENCH HORN
GC-ALTO SAX
GC-ALTO RECT
GC-TRUMPET
GC-CLARINET
GC-TROMBONE
Lockable latches for added security
For detailed measurements visit www.gatorcases.com
24Band
• 8 Color variations to show your school spirit• Nylon lightweight exterior with plush covered dense EPS foam interior• No-slip rubber shoulder pad and interlocking comfort grip handle • Removable shoulder strap with D-rings and clips on all models• Trumpet case has storage for mutes and 2 mouthpiece holders• Altosax case include internal section for mouthpiece
SPIRIT SERIES LIGHTWEIGHT BAND CASES
Model ColorGL-ALTOSAX-WG White & GreenGL-ALTOSAX-YB Yellow & BlueGL-ALTOSAX-WB White & BlueGL-ALTOSAX-WR White & RedGL-ALTOSAX-RK Red & BlackGL-ALTOSAX-RB Red & BlueGL-ALTOSAX-YK Yellow & BlackGL-ALTOSAX-WM White & MaroonGL-ALTOSAX-YP Yellow & Purple
Model ColorGL-FLUTE-WG White & GreenGL-FLUTE-YB Yellow & BlueGL-FLUTE-WB White & BlueGL-FLUTE-WR White & RedGL-FLUTE-RK Red & BlackGL-FLUTE-RB Red & BlueGL-FLUTE-YK Yellow & BlackGL-FLUTE-WM White & MaroonGL-FLUTE-YP Yellow & Purple
Model ColorGL-TRUMPET-WG White & GreenGL-TRUMPET-YB Yellow & BlueGL-TRUMPET-WB White & BlueGL-TRUMPET-WR White & RedGL-TRUMPET-RK Red & BlackGL-TRUMPET-RB Red & BlueGL-TRUMPET-YK Yellow & BlackGL-TRUMPET-WM White & MaroonGL-TRUMPET-YP Yellow & Purple
Model ColorGL-CLARINET-WG White & GreenGL-CLARINET-YB Yellow & BlueGL-CLARINET-WB White & BlueGL-CLARINET-WR White & RedGL-CLARINET-RK Red & BlackGL-CLARINET-RB Red & BlueGL-CLARINET-YK Yellow & BlackGL-CLARINET-WM White & MaroonGL-CLARINET-YP Yellow & Purple
White & Green
Yellow & Blue
White & Blue
White & Red
Red & Black
Red & Blue
Yellow & Black
White & Maroon
Yellow & Purple
25 Band
ModelGL-ALTOSAX-MPCGL-CLARINET-AGL-CORNET-A
• Nylon lightweight exterior with plush covered dense EPS foam interior • No-slip rubber shoulder pad and interlocking comfort grip handle• Removable shoulder strap with D-rings and clips - Now on all models• GL-TRUMPET-MUTE has storage for mutes and 2 mouthpiece holders• GL-ALTOSAX cases include internal section for mouthpiece• GL-TROMBONE-F fits trombones with F-style attachment
ModelGL-TENOR SAX-AGL-TROMBONE-FGL-TRUMPET-AGL-TRUMPET-MUTE
LIGHTWEIGHT BAND CASES
Check out the video of thisproduct on our website
ModelGL-FLUTE-AGL-FRENCH HORN-AGL-OBOE-A
GL-TRUMPET-MUTEincludes mute storage
Girl PowerModel
GL-ALTOSAX-MPCPKGL-CLAR-PINK-AGL-CLAR-PURP-AGL-FLU-PINK-AGL-FLU-PURP-A
GL-CLAR-PURP-A
GL-ALTOSAX-MPCPK GL-FLU-PURP-A
GL-CLAR-PINK-A
GL-FRENCH HORN-A
GL-FRENCH HORN-A
GL-CARINET-A
GL-CORNET-A
GL-OBOE-A
GL-TROMBONE-A
GL-TRUMPET-MUTE
GL-FLUTE-A
For detailed measurements visit www.gatorcases.com
26Racks
• G-Tour style rack with rackable width of 10.39 inches• Great compact solution for half rack gear• 8” front rail to rear rail depth• Includes rear rack rail• Thick plywood construction• Heavy-duty commercial-grade plated hardware
Model Space Unit DepthG-TOUR 4UHR 4 8"G-TOUR 6UHR 6 8"
• 10.39” overall width• Drawers and shelves have 8” overall depth• Fits in the Gator G-Tour half racks• Cold rolled 16 gauge steel construction• Black powder coated finish
• Fully enclosed rack drawer• Lock knock-out, lock and key included• Rear cable grommet and
spring-loaded latches• Heavy-duty smooth glide drawer slides
• 1U shelf with universal Hole Pattern• 25lb weight capacity
• Flanged rear edge on shelf for rigidity
• Flat panels are solid panels with flat edge• Vented panels include vents for air circulation
and flanged edge
Model Description Space Unit
GE-HRDRAWER-2U Half Rack Width 2U Drawer 2GE-HRDRAWER-3U Half Rack Width 3U Drawer 3GE-HRPNL-ST-FLT-1 Half Rack Width 1U Flat Panel 1GE-HRPNL-ST-FLT-2 Half Rack Width 2U Flat Panel 2GE-HRPNLVNT-1U Half Rack Width 1U Vented Panel 1GE-HRPNLVNT-2U Half Rack Width 2U Vented Panel 2GE-HRSHLF10-1U Half Rack Width 1U Shelf 1GE-HRSHLF15-2U Half Rack Width 2U Shelf 2
GE-HRSHLF-UNIV-1U Half Rack Width 1U Universal Shelf With Universal Hole Pattern 1
Rack Drawer
Standard Shelf
UniversalShelf
VentedPanel
FlatPanel
G-TOUR™ HALF RACKS
ALL HALF RACK ACCESSORIES FEATURE
HALF RACK DRAWERS
HALF RACK UNIVERSAL SHELF
HALF RACK SHELVES
HALF RACK PANELS
Front and rear lids allowcomplete access to gear
Universal hole pattern for mounting smaller components
Band Demon Hunter is Serious about protecting their gear with Gator
27 Racks
All G-Tour Racks Feature:• Thick plywood construction with laminated exterior and tongue and groove extruded aluminum valance• Heavy-duty commercial-grade plated hardware and 3.2mm thick front & rear rack rails
Model Rack Type Rack Units Rackable Depth
G-TOUR SHK8 CAS Shock Rack W/Casters 8 17”G-TOUR SHK12 CAS Shock Rack W/Casters 12 17”G-TOUR EFX2 Shallow FX Racks 2 13”G-TOUR EFX4 Shallow FX Racks 4 13”G-TOUR EFX6 Shallow FX Racks 6 13”G-TOUR 2U Standard 2 20.25”G-TOUR 4U Standard 4 20.25”G-TOUR 6U Standard 6 20.25”G-TOUR 8U Standard 8 20.25”G-TOUR 10U Standard 10 20.25”G-TOUR 12U Standard 12 20.25”G-TOUR 4UW Standard W/ 2 Wheels & Retractable Handle 4 20.25”G-TOUR 10U CAST Standard W/ 4 Fixed 4” Casters 2 Of Which Lock 10 20.25”G-TOUR 12U CAST Standard W/ 4 Fixed 4” Casters 2 Of Which Lock 12 20.25”G-TOUR 14U CAST Standard W/ 4 Fixed 4” Casters 2 Of Which Lock 14 20.25”G-TOUR 16U CAST Standard W/ 4 Fixed 4” Casters 2 Of Which Lock 16 20.25”G-TOUR12UCA-24D 12mm (1/2”) Constructed Deep Racks W/Casters 12 24”G-TOUR16UCA-24D 12mm (1/2”) Constructed Deep Racks W/Casters 16 24”G-TOUR 10X12 PU Pop-Up Console Rack 10 Top / 12 Front 20.25”G-TOUR 10X14 PU Pop-Up Console Rack 10 Top / 14 Front 20.25”G-TOUR 10X16 PU Pop-Up Console Rack 10 Top / 16 Front 20.25”G-TOUR-GRC-1406 Fixed Top Compact Console Rack 14 Top / 6 Front 19.25”G-TOUR 10X12 Fixed Top Console Rack W/ Top & Front Lid W/Rear Doors 10 Top / 12 Front 19.25”G-TOUR-GRC12X12 Fixed Top Console Rack W/ Top & Front Lid W/Rear Doors 12 Top / 12 Front 23.75”
G-TOUR™ RACK CASES
Pop-Up Racks feature 19” console rack with pop-up top-loaded rack.
Ratchet top allows adjusting tovarious angles during use and
transporting with top flat
G-TOUR-GRC12X12 has a fixed 12 space slant top and 12
space bottom. Fits the A&HMix Wizard
G-TOUR-GRC-1406 breaks down into compact transport with casters
G-TOUR-GRC-1406 has a 14U mixer section with space for
cable routing
G-TOUR-GRC-1406 is a pro level14 over 6 console rack withcompact transport design
G-Tour Shock Racks featurecompressed shock absorbing
foam suspension
Check out the video of thisproduct on our website
For detailed measurements visit www.gatorcases.com
28Racks
Gator’s Polyethylene molded (LLDPE) rack cases are the perfect lightweight yet durable rack solution. The comfortable recessed side handles and threaded, field-replaceable commercial-grade plated front & rear rack rails round off the cases.
• Master on/off switch with indicator light• 5 outlets (4 rear, 1 front) • Push to reset 15 amp circuit breaker • Rugged pull-out handle and roller blade-style recessed wheels• Front and rear rack rails
Model Type Rack Units Rack Depth
GR-2S Shallow 2 14.75”GR-3S Shallow 3 14.75”GR-4S Shallow 4 14.75”GR-6S Shallow 6 14.75”GR-2L Standard w/ Locking Lids 2 19.25”GR-4L Standard w/ Locking Lids 4 19.25”GR-6L Standard w/ Locking Lids 6 19.25”GR-8L Standard w/ Locking Lids 8 19.25”GR-10L Standard w/ Locking Lids 10 19.25”GR-12L Standard w/ Locking Lids 12 19.25”GRR-4L Rolling w/ Locking Lids 4 19.25”GRR-6L Rolling w/ Locking Lids 6 19.25”GRR-8L Rolling w/ Locking Lids 8 19.25”GRR-10L Rolling w/ Locking Lids 10 19.25”GRR-4PL-US Rolling/Power w/ Locking Lids 4 19.25”GRR-6PL-US Rolling/Power w/ Locking Lids 6 19.25”GRR-8PL-US Rolling/Power w/ Locking Lids 8 19.25”GRR-10PL-US Rolling/Power w/ Locking Lids 10 19.25”
• Rugged pull-out handle • Roller blade-style recessed wheels • Front and rear rack rails
• Compact 14.75” rackable depth• Front and rear rack rails
• 19.25” rackable depth• Front and rear rack rails
Locking LidComfortable recessed
side handles
Heavy-duty twist latches Aluminum valance
POLYETHYLENE RACKS
SHALLOW RACKS STANDARD RACKS
ROLLING RACKS ROLLING POWERED RACKS
Shown stacked on a Gator Caster Board
Check out the video of thisproduct on our website
29 Racks
Gator’s lightweight Polyethylene shock racks are built for protection and function. The shock rack is specifically designed to allow 360 degree air ventilation around equipment to keep your gear lasting longer. Adjustable interior sliding support on each side of rack adjusts front to back and up and down for rear support of gear to eliminate shifting and jostling. Recessed side handles give your hands a break while the locking lid gives you peace of mind.
Model Rack Units Rack Depth
G-SHOCK-4L 4 19.5”G-SHOCK-8L 8 19.5”G-SHOCK-12L 12 19.5”G-SHOCK-16L 16 19.5”
Model Rack Units Rack DepthGRC-6X4 6 Top / 4 Front 15.75”GRC-8X2 8 Top / 2 Front 19.25”GRC-10X2 10 Top / 2 Front 22.75"GRC-10X4 10 Top / 4 Front 22.75”GRC-10X6 10 Top / 6 Front 22.75”GRC-10X8 10 Top / 8 Front 22.75”
• Lightweight Polyethylene construction• Front, rear & top rack rails with rear wire access• Recessed side handles• Compact size for easy transport
Model Rack Units Rack DepthGRC-BASE-10 10 22.75”GRC-BASE-14 14 22.75”
Rolling rack bases are made of lightweight Polyethylene plastic and conveniently fit under any Gator GRC or standard rack case. The four easy rolling wheels include 2 locking wheels for keeping the rack base in position. The heavy-duty twist latches and recessed side handles make it the ultimate pack and load solution.
Model Rack Units Rack DepthGRC-10X8 PU 10 Top / 8 Front 23.25”GRC-10X12 PU 10 Top / 12 Front 23.25”GRC-12X10 PU 12 Top / 10 Front 26.75”
CONSOLE RACKS
POLYETHYLENE MOLDED SHOCK RACKS
CONSOLE RACKS
POP-UP CONSOLE RACKS
ROLLING RACK BASE
Independent rubbershock absorbers at each
corner
7mm threaded field replaceable commercial-
grade plated rack rails
Pop-up top-loaded racks include a ratchet top which allows adjusting to
various angles during use andtransporting with the top flat
GRC-10x11 PU & GRC-12x10 PU feature 4” heavy-duty industrial casters, 2 of which are locking
GRC racks have 7mm threaded field replaceable
commercial-grade rack rails
Stacks beneath any Gator GRC Console or
Standard rack
Check out the video of thisproduct on our website
30Racks
Gator’s virtually indestructible rotational molded Polyethylene rack cases are the ultimate in durability. The 19” deep rack cases are available in standard or rolling versions. All cases come with full sized front and rear rack lids for easy access. The rolling version includes a telescoping tow-handle and rugged in-line style wheels. These unique racks are available in several custom colors. The black version is made entirely from recycled materials.
Description Model Rack Units Rack DepthStandard G-PRO-2U-19 2 19”Standard G-PRO-4U-19 4 19”Standard G-PRO-6U-19 6 19”Standard G-PRO-8U-19 8 19”Standard G-PRO-10U-19 10 19”Standard G-PRO-12U-19 12 19”Rolling G-PROR-4U-19 4 19”Rolling G-PROR-6U-19 6 19”Rolling G-PROR-8U-19 8 19”
Made From Recycled Materials
Available in a variety of colors
• Rotational-molded Polyethylene console rack• Rugged Nylon dust cover• Heavy-duty rack rail• Molded in carry handles
Model Weight Rack Units Rack DepthGDJ-8X2 12 lbs 8 Top / 2 Front 15.5”GDJ-8X4 16 lbs 8 Top / 4 Front 15.5”GDJ-10X6 18.74 lbs 10 Top / 6 Front 15.5”
• Lightweight wood console racks• Slanted top rack rail is perfect for mixers• Comfortable side handles• Removable padded cover with Velcro® over the front, top & rear
Model Weight Rack Units Rack DepthGRCW-10X4 22 lbs 10 Top / 4 Front 20.25”
• Virtually indestructible Polyethylene construction• Four casters, 2 locking / 2 non locking• Fits both G-PRO Rack Series and GR-L Rack Series
Model FitsG-CASTERBOARD G-PRO and GR-L Racks
ROTO MOLD RACK CASES
MOLDED CONSOLE RACKS
WOOD CONSOLE RACKS
ROTO MOLDED CASTER BOARD
Stackable design
Molded-in ergonomic side carry handles
Recessed steel twist latches
Built-in tow handle and wheels
PUORGR YERE BLEB PG RG
G
G
Grey Granite Red Granite Purple Granite Black Red Blue Green Yellow Orange Purple
Gator Racks on the Warped Tour
31 Racks
Model Weight Rack Units Rack Depth StyleGR-RACKBAG-2U 8 lbs 2 13” StandardGR-RACKBAG-3U 11 lbs 3 13” StandardGR-RACKBAG-4U 13 lbs 4 13” StandardGR-RACKBAG-2UW 8 lbs 2 13” RollingGR-RACKBAG-3UW 11 lbs 3 13” RollingGR-RACKBAG-4UW 13 lbs 4 13” Rolling
• High density 3/4” industrial plywood • Held in place by 2 locking straps • Supports up to 400 pounds • 4” industrial grade casters
Model FitsGA-100 Standard RacksGA-200 Shock Racks
• Lightweight style rack bag great for effects processors, recording equipment, and sound modules• Polyethylene-reinforced interior frame• Internal reinforced aluminum valance• Rear flap allows access to entire panel of equipment• Ergo grip carry handle• 600-Denier nylon exterior• Exterior pocket for cables and accessories
Model Description Rack Units Rackable DepthGR-STUDIO-4U Standard Studio Rack 4 18”GR-STUDIO-8U Standard Studio Rack 8 18”GR-STUDIO-12U Standard Studio Rack 12 18”GR-STUDIO-16U Standard Studio Rack 16 18”
• 19” EIA standard racks• 5/8” thick MDF furniture grade black oak laminate• 3.2mm heavy-duty cold rolled steel rack rails
Model Weight Rack Units
Rack Depth
GRB-2U 9 lbs 2 14”GRB-3U 12 lbs 3 14”GRB-4U 14 lbs 4 14”
• Heavy-duty rack bag great for effects processors, and recording equipment• Polyethylene-reinforced interior frame and internal reinforced aluminum valance• Rear flap allows access to entire panel of equipment• Dual comfort grip carry handles• Adjustable shoulder strap• 600-Denier nylon exterior• Exterior pocket for cables and accessories
RACK BAGS
LIGHTWEIGHT RACK BAGS
CASTER BOARDS
STUDIO RACK CABINETS
Two padded comfort carry handles
Thick MDF furniture grade black oak laminate for durability that lasts
Retractable tow handle is mounted internally for
added durability
Rolling Bag Features:• Retractable tow handle & recessed wheels• Heavy-duty shoulder strap
Standard Bag Features:• Heavy-duty shoulder strap
Gator Racks on the Warped Tour
32Racks
For detailed measurements and schematicsvisit www.gatorcases.com
All Floor Racks Feature:• 18 gauge black powder coated cold rolled steel• 11 gauge adjustable front rack rail with printed rack numbers• Cabinets are gangable using optional baying kit• Includes leveling kit• Meets ANSI/EIA RS-310-D, DIN41491;Part1, IEC297-2, DIN41491;Part7, GB/T3047.2-92 standards• Also available with M6 rails
Model Rear Door
Front Door Rack U
Overall Depth
Overall Width
Overall Height
Height w/Casters
Racking Height
Rackable Depth
GR-FS4B1823TDB Steel Vented Glass 18 23.6” 23.6” 38.9” 41.7” 31.5” 20”GR-FS4B1823TBB Steel Steel 18 23.6” 23.6” 38.9” 41.7” 31.5” 20”GR-FS4B2223TDB Steel Vented Glass 22 23.6” 23.6” 45.9” 48.7” 38.5” 20”GR-FS482223TBB Steel Steel 22 23.6” 23.6” 45.9” 48.7” 38.5” 20”GR-FS4B2723TDB Steel Vented Glass 27 23.6” 23.6” 54.6” 57.4” 47.25” 20”GR-FS4B2723TBB Steel Steel 27 23.6” 23.6” 54.6” 57.4” 47.25” 20”GR-FS4B3231MDB Steel Vented Glass 32 31.5” 23.6” 63.4” 66.2” 56” 28”GR-FS4B4223TDB Steel Vented Glass 42 23.6” 23.6” 80.9” 83.7” 76.3” 20”GR-FS4B4223TBB Steel Steel 42 23.6” 23.6” 80.9” 83.7” 76.3” 20”GR-FS4B4739MDB Steel Vented Glass 47 39.4” 23.6” 72.2” 75” 64.8” 36”GR-PST4M4223 Four Post Open Rack 42 23.6” 23.6” 79.5” 82.3” 74.2” 20”
11 gaugenumbered rack rail
Optional lockknock-out
Spring-loadedlatches
See pages 35-37 for a list of available options, accessories,
hardware and add-ons
Heavy-dutycasters
Floor Standing Standard Racks Feature:• Removable side panels include spring loaded latch• Quick release front and rear doors• Spring-loaded, push and turn locking system on glass door only• Perforated top• 1/2”, 5/8”, 3/4”, 1” and 1 1/2” cable entry knockouts on top and bottom• 5/8” knockout designed to be used for VHF / UHF antenna
Floor Standing 4 Post Rack Features:• Four post open rack design• Four casters included
FLOOR STANDING RACKS
Four PostOpen Rack
Floor Standing Rack With VentedGlass Door
Red stripes are removable
33 Racks
OPTIONS
Model Front Door Rack U Overall Depth Overall Width Overall Height Racking Height Rackable Depth
GR-WH5B0917TB Steel 9 18” 23.5” 20.5” 16.75” 17”GR-WH5B1217TB Steel 12 18” 23.5” 26” 22” 17”GR-WH5B1817TB Steel 18 18” 23.5” 38.25” 32.5” 17”
All Reversible Racks Feature:• Reversible wall mounted hinged rack• Rear mounting section offers “shelf” design for easier installation• Hinged back double section welded frame construction• 16 gauge removable side panels with spring latch• 16 gauge cold rolled steel top and bottom• 11 gauge drilled and tapped front and rear rack rails• Rack U numbers printed on the rack rail• 1/2”, 5/8”, 3/4”, 1” and 1 1/2” cable entry knockouts on top and bottom• 5/8” knockout designed to be used for VHF/UHF antenna• 10”x10” rear access knockout for cable entry• Also available with M6 rails
Rear mounting section offers “shelf” for easier installation
Reversible design allows the rack to be mounted so it opens
left or right
REVERSIBLE HEAVY-DUTY WALL HANGING HINGED RACKS
Front Door Styles Available For All Rack Styles(locking front door included with rack):• Toughened glass with vented sides and spring loaded push and turn locking system • 18 gauge Solid Steel
Back Door Styles For Floor Standing Racks Only(locking back door included with rack):• 18 Gauge solid steel
Caster & Level Kits For Floor Standing Racks Only• 2.5” Heavy-duty caster kit (2 locking, 2 non-locking)• 4 adjustable feet for stabilizing rack
Rackable Fan Top For Floor Standing Racks Only• 110v 2 fan kit for 23” deep racks• 110v 4 fan kit for 35” deep racks
Side Panel Locks• Installable barrel lock for side panels
Baying Kit For Floor Standing Racks Only• Clips for making floor standing racks gangable
Rear Rack Rails For Floor Standing Racks Only• Adjustable 11 gauge drilled and tapped rear rack rail
See Pages 35-37 For Model Numbers
Red stripes are removable
34Racks
All Wall Hanging Racks Feature:• 18 gauge removable side panels with spring latch• 18 gauge cold rolled steel top and bottom• Fan ready perforated top• 11 gauge drilled and tapped front and rear rack rails• Rack U numbers printed on the rack rail• 1/2”, 5/8”, 3/4”, 1” and 1 1/2” cable entry knockouts on top and bottom• 5/8” knockout designed to be used for VHF/UHF antenna• 10”x10” rear access knockout for cable entry• Also available with M6 rails
Model Front Door
Rack U Overall Depth Overall Width Overall Height Racking Height Rackable Depth
GR-WH4B0921TB Steel 9 21.6” 23.6” 19.7” 15.75” 19.25”GR-WH4B0921TD Glass 9 21.6” 23.6” 19.7” 15.75” 19.25”GR-WH4B1221TB Steel 12 21.6” 23.6” 25” 21” 19.25”GR-WH4B1221TD Glass 12 21.6” 23.6” 25” 21” 19.25”GR-WH4B1821TB Steel 18 21.6” 23.6” 35.5” 31.5” 19.25”GR-WH4B1821TD Glass 18 21.6” 23.6” 35.5” 31.5” 19.25”
Wall Hanging Hinged Racks Feature:• Hinged back double section welded frame construction
Wall Hanging Fixed Racks Feature:• Fixed back single section welded frame construction• Comes with removable 18 gauge mounting strip for easy wall installation
Model Front Door
Rack U Overall Depth Overall Width Overall Height Racking Height Rackable Depth
GR-WF4B0917TB Steel 9 17.7” 23.6” 19.7” 15.75” 16.25”GR-WF4B0917TD Glass 9 17.7” 23.6” 19.7” 15.75” 16.25”GR-WF4B1217TB Steel 12 17.7” 23.6” 25” 21” 16.25”GR-WF4B1217TD Glass 12 17.7” 23.6” 25” 21” 16.25”
Hinged Wall Hanging Racks
Fixed Wall Hanging Racks
Fixed Wall Hanging Rack With Steel Door
Hinged Wall Hanging Rack With Vented Glass Door
WALL HANGING RACKS
Hinged back designallows easy access to rear of racked gear
Removable side panels for easy access
Vented glass doors available for maximum
air circulation
For detailed measurements and schematicsvisit www.gatorcases.com
Red stripes are removable
35 Rack Acc
Model Panel Type Construction Unit StyleGE-PNLVNT-1U Vented Steel 1 FlangedGE-PNLVNT-2U Vented Steel 2 FlangedGE-PNLVNT-4U Vented Steel 4 FlangedGE-PNLVNTSTD-1U Perforated Steel 1 FlangedGE-PNLVNTSTD-2U Perforated Steel 2 FlangedGE-PNLVNTSTD-4U Perforated Steel 4 FlangedGE-PNLSECFIX-1U Security Steel 1 RaisedGE-PNLSECFIX-2U Security Steel 2 RaisedGE-PNLSECFIX-3U Security Steel 3 RaisedGE-PNLSECFIX-4U Security Steel 4 RaisedGE-PNL-ST-FLG-1 Standard Steel 1 FlangedGE-PNL-ST-FLG-2 Standard Steel 2 FlangedGP-PNL-ST-FLG-3 Standard Steel 3 FlangedGE-PNL-ST-FLG-4 Standard Steel 4 FlangedGE-PNL-ST-FLT-1 Standard Steel 1 FlatGE-PNL-ST-FLT-2 Standard Steel 2 FlatGE-PNL-ST-FLT-3 Standard Steel 3 FlatGE-PNL-ST-FLT-4 Standard Steel 4 FlatGE-PNL-UNIV16BL Knockout Steel 1 Flat
Model Panel Type Construction Fans Space FanGE-FANPNL1-110V Fan Steel 1 IncludedGE-FANPNL2-110V Fan Steel 2 IncludedGE-FANPNL3-110V Fan Steel 3 Included
• Standard panels offered both in aluminum and cold rolled 16 gauge black powder coated steel• Flat and flanged models available• Vented panels have elongated vent holes and perforated panels have 5/32” vent holes• Security panels have 5/32” holes, non PVC rubber edging to prevent scratching of gear and a 1” raised space between panel and gear• Fan panels have elongated, contoured vent holes, available with or without UL approved 110VAC 4.5” fan(s)• Knockout panel has 16 knockouts for customizing
Model DescriptionGE-LRAIL-23 For 23” Deep CabinetsGE-LRAIL-35 For 35” Deep CabinetsGR-FS4-RR-18-T Rear Rail Kit for 18U FS4GR-FS4-RR-22-T Rear Rail kit for 22U FS4GR-FS4-RR-27-T Rear Rail Kit for 27U FS4GR-FS4-RR-42-T Rear Rail Kit for 42U FS4
Rack Rails
ModelGE-SDR-LOCK
Rack Screws and Locks
Model QtyGE-SCRW-P-100 100GE-SCRW-P-25 25
Fan Kit
Model DescriptionGE-FS-KITCST2.5 2.5” Caster KitGE-FS-KIT-BAY Baying Kit
Caster, and Baying Kits
GE-PNLVNT-2U
GE-PNL-ST-FLG-2U
GE-FANPNL3-110V
Model Fans Fits FS4 Racks
GR-FS4B2FN23110 2 23” Deep
* Lock comes with key
RACK PANELS
Knockout panel has 16 knockouts for customizing
ACCESSORIES
GE-PNLSECFIX-3U
For detailed measurements visit www.gatorcases.com
36Rack Acc
Model Description Space Unit Depth
GE-DRAWER-2U 2U Drawer 2 14”GE-DRAWER-3U 3U Drawer 3 14”GE-DRAWER-4U 4U Drawer 4 14”GE-WIRELESSDRWR Wireless Mic Drawer 3 14”GE-MIC 10-DRWR Microphone Drawer 2 14”GE-DRAWER-2US 2U Shallow Drawer 2 10”GE-DRAWER-3US 3U Shallow Drawer 3 10”GE-DRAWER-4US 4U Shallow Drawer 4 10”GE-DRAWER-2UDFM 2U Diced Foam Drawer 2 14”GE-DRAWER-3UDFM 3U Diced Foam Drawer 3 14”GE-DRAWER-4UDFM 4U Diced Foam Drawer 4 14”GE-DRAWER-3UDIV 3U Divider Drawer 3 14”
Wired Microphone Drawer Features:• 2U Rack drawer stores 10 hard wired microphones• Each microphone cavity is 6.5" x 2" x 2"
Wireless Drawer Features:• 3U size drawer with wireless microphone nest• Nest stores 4 wireless microphones, body packs, headsets and accessories• Wireless storage accommodates microphones with clip still attached• Body pack and microphone storage area lined with Polyethylene foam and Tricot covered plywood dividers
GE-DRAWER-4U
GE-WIRELESSDRWR
GE-MIC 10-DRWR
GE-DRAWER-2UDFM
GE-DRAWER-3UDIV
Gator Cases offers a large selection of rack drawers designed for any of your rack needs. All Gator rack drawers feature fully enclosed 16 gauge cold roll steel construction. The heavy-duty smooth-glide drawer slides and spring-loaded latches make using these drawers effortless. The rack drawers are coated with a classic black powder finish for a clean, uniform look. For added security, drawers include a lock knock-out and a complimentary lock and key (not available on shallow rack models).
Model Outlets MountsGE-PDU-6UL 6 HorizontalGE-PDU-12UL 12 Vertical
• UL Approved 110v power strip
• Main power switch
COOLING FANS
ModelGE-FAN-110-QTGE-FAN-110-STD
• UL Approved 110VAC flush mount 4.5” fan• GE-FAN-110-QT has ball bearing quiet design (50 CFM rating)• GE-FAN-110-STD is standard fan design (110 CFM rating)• Mounting hardware included
POWER OPTIONS
GE-DRAWER-3US
Standard Drawerfeatures two 2”
rubber grommetsfor rear cable
access
Wireless Drawer includes 11”
microphone sections and foam storage compartment with
cut-outs to hold up to 16 AA batteries
Wired Microphone Drawer features dense Polyurethane nest designed
for microphone protection
Divider Rack Drawerfeatures Tricot covered
adjustable wood divider system
2U Diced Foam drawer includes2 layers of customizable
Polyurethane foam
3U Diced Foam drawer includes3 layers of customizable
Polyurethane foam
4U Diced Foam Drawer includes4 layers of customizable
Polyurethane foam
Shallow Rack Drawer has a 10” depth for use in shallow racks
RACK DRAWERS
Description Model Type SizeCable Management GE-CBLMNGMTL-47 Metal 47UCable Management w/cap GE-CBLMNGWC-1U Metal 1UCable Management w/cap GE-CBLMNGWC-2U Metal 2UBrush Type Cable Management GE-FS4CBLENTBRS Metal 15.5” x
2.5” x .5”Cable Hanger GE-CABLE-HANGER Metal 19 slots 37 Rack Acc
GE-DRAWER-3US
• Cold rolled 16 gauge steel construction• Black powder-coated finish
Keyboard Drawer Features:• Separate compartments for keyboard and mouse• Rear access for cables• Fits most standard small pattern keyboards
Keyboard Shelf Features:• Sliding shelf for keyboard with mouse shelf• Fits most standard keyboards
Model Space Unit Depth
GE-SHLF10-1U 1 10”GE-SHLF15-2U 2 15”GE-SHLFVNT15-1U 1 15”GE-SHLFVNT15-2U 2 15”GE-SHLFVNT17-3U 3 17”GE-SHLF-SLD-1U 1 14.75”GE-KBD-DRAWER 1 13”GE-KBD-SHELF 2 13”GE-SHLF-TRAP-2U 2 Max 14”GE-SHLF-TRAP-3U 3 Max 14”GE-SHLF-UNIV-1U 1 10”
Standard Shelf Features:• Rear flange for rigidity
Vented Shelf Features:• Elongated vent holes for optimum air circulation• GE-SHLF-SLD-1U is a sliding vented 1U shelf
Description Model Type SizeCable Management GE-1U-CBLMNGPL Plastic 1UBrush Type Cable Management GE-CBLENTBRSH1U Plastic 1UCable Management GE-CBLMNGMTL-18 Metal 18UCable Management GE-CBLMNGMTL-22 Metal 22UCable Management GE-CBLMNGMTL-27 Metal 27UCable Management GE-CBLMNGMTL-42 Metal 42U
GE-SHUNTRAIL-19
GE-1U-CBLMNGPL
GE-CBLMNGWC-1U
GE-CBLMNGMTL-18
Gator’s cable management systems offer a variety of solutions to meet your individual needs. Cable panels are offered in plastic as well as metal, in a wide range of sizes and styles.
Trap Shelf Features:• Clamping trap shelf with padded clamping bars• 2U clamp range is 1.8”- 2.5”• 3U clamp range is 2”- 4.3”• 25 lbs weight capacity
Universal Shelf Features:• Universal hole pattern for mounting smaller rack components
GE-KBD-DRAWER
GE-KBD-SHELF
GE-SHLF-TRAP-3U
GE-SHLF-SLD-1UGE-SHLF-UNIV-1U
GE-SHLFVNT17-3U
GE-CABLE-HANGER
Keyboard Drawer features a built-in cable management system with retractable arm
Keyboard Shelf hasa dual staggered
shelf design
Adjustable padded clamping bars
Universal hole pattern formounting smaller components
Vent holes allowoptimum air circulation
Includes detachable cap
RACK & KEYBOARD SHELVES
CABLE MANAGEMENT
38360 ARM
• Mounts to any Gator “ARM” case, table top surface or wall• Easily adjusts in 6 directions with 360 degree horizontal adjustment• 22” overall length• Tray included to accommodate laptops and iPad™ style tablets• VESA Mount for VESA monitors up to 22 inches• Durable easy install design• Integrated cable management keeps cables organized
Model StyleG-ARM-360-DESKMT Desk type mounting with clampG-ARM-360-FIXEDMT Fixed mount for permanent installG-ARM-360-WALLMT Fixed mount for permanent wall installG-ARM-360-CASEMT Gator Arm case mountable
Model StyleG-ARM-WALLMT-KIT Wall mount bracketG-ARM-TRUSSMT-KIT Truss mount bracket
360° ARTICULATINGARMS FEATURE
• Heavy-duty adjustable table clamp included
• Fixed horizontal mount for permanent installation• Fixed wall mount for permanent wall installation
• Heavy-duty wall mount bracket for converting any Gator 360° Arm into wall mount arms• Includes built-in level for easy mounting
• Kit to allow mounting of the G-ARM 360 to most common truss tubing. Can mount vertically or horizontally• Fits most 2” (50mm) class truss tubing
360° ARTICULATING DESK MOUNT ARM
360° ARTICULATING INSTALL ARMS
360° ARTICULATING WALL MOUNT BRACKET
360° ARTICULATING TRUSS MOUNT BRACKET
MonitorMounting
Laptop/TabletMounting
Wall MountBracket
Truss MountBracket
360O
Rotation Full Range OfExtension
www.scsav.com
Short Circuit Studio in Tampa, FLUtilizing the Gator 360° Desk Mount ARM
39 Mixer
Model Interior DimensionsG-TOUR 19X21 19” x 21” x 7”G-TOUR 20X25 20” x 25” x 8”G-TOUR 20X30 20” x 30” x 6.5”G-TOUR 24X36 24” x 36” x 5.5”
• Fully adjustable interior to hold mixer in place• Thick plywood construction with laminated exterior and
stackable ball corners• Red recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial-grade hardware • Removable lids with breakaway hinges allow mixer to be used
while in the case
• Tow-handle and wheels (not available on the G-TOUR 20X25)
Model SpacesG-TOUR-SLMX10 10UG-TOUR-SLMX12 12UG-TOUR-SLMX14 14U
• Fixed angle rack mount mixer cases• Rear access port to allow cables to remain plugged in with lid on• Thick plywood construction with laminated exterior• Red recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial-grade hardware & stackable ball corners
• Custom fit tour case • Doghouse Design• Gator G-ARM 360 included• ARM is adaptable to LCD screens as well as laptops and iPads™• Thick 1/2” plywood construction with laminated exterior• Heavy-duty casters and Gator signature hardware
Model FitsG-TOURPRE242-DH-ARM Custom fit for the Presonus Studiolive 24.4.2 AIG-TOUR PRE1642-ARM1 Custom fit for the Presonus 16.4.2G-TOUR X32-ARM1 Custom fit for the Behringer X32
G-TOUR™ MIXER CASES
G-TOUR™ 19X21, 20X30, & 24X36 Include:
G-TOUR™ FIXED SLANT MIXER CASES
G-TOUR™ MIXER CASE WITH ARM
The fixed slant mixer case features a fixed angle rack to set yourmixer at the perfect angle for use while in the case
Adjustable Arm is a greatsolution for remote mixer
applicationsCheck out the video of this
product on our website
40Mixer
• Custom fit interior• Doghouse design for easy multi-pin snake connection
*(not included on G-TOUR-SIEXP-16 or G-TOUR X32CMPCTW)• Thick 1/2" plywood construction with laminated exterior • Ultra-Dur EVA interior padding• Red recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial-grade hardware• Upright transport design with (4) heavy duty casters (2 locking)• G-TOUR X32CMPCTW & G-TOUR-SIEXP-16 includes tow-hanlde and
(2) recessed wheels *Does not include doghouse design
Model DescriptionG-TOUR AH2400-24 Custom fit for Allen & Heath 24 channel GL2400G-TOUR AH2400-32 Custom fit for Allen & Heath 32 channel GL2400G-TOUR YAMLS9 Custom fit for Yamaha LS9 Large FormatG-TOUR LS9-16 Custom fit for 16 channel Yamaha LS9G-TOUR MIDVENF32 Custom fit for 32 channel Midas Venice F SeriesG-TOUR M32 Custom fit for Midas M32G-TOUR PRE242-DH Custom fit for PreSonus Studio Live 24 AIG-TOUR PRE1642 Custom fit for the Presonus 16.4.2G-TOUR PRE32 AI-DH Custom fit for the Presonus Studio Live A.I.G-TOUR X32 Custom fit for the Behringer X32G-TOUR X32CMPCTW Custom fit for the Behringer X32 CompactG-TOUR-SIEXP-16 Custom fit for the Soundcraft SI Expression 16G-TOUR-SIEXP-24 Custom fit for the Soundcraft SI Expression 24G-TOUR-SIEXP-32 Custom fit for the Soundcraft SI Expression 32
G-TOUR YAMLS9
G-TOUR PRE1642
G-TOUR™ LARGE FORMAT MIXER CASES
Doghouse for cable management
Doghouse design
Hinged door gives full access to gear
Check out the video of thisproduct on our website
NEWMODELS
41 Mixer
Model FitsGMIX-PRESON1602-WP Fits Presonus Studiolive 16.0.2 mixing consoleGMIX-STAGESCAPE-WP Fits Line 6 Stagescape mixing consoleGMIX-DL1608-WP Fits Mackie DL1608 mixing consoleGMIX-QSCTM8-WP Fits QSC Touch Mix 8 mixerGMIX-QSCTM16-WP Fits QSC Touch Mix 16 mixer
• Black waterproof injection molded case, with foam insert for a custom fit• Water and dust proof with IP 67 certification• ATA-300 Certification• Impact proof lightweight NK-7™ resin• Easy Release Powerclaw™ Latching System• Soft grip comfort handle & Pad-Lockable• Mil-STD-810F Immersion Test Certified
Model Interior DimensionsGMIX-1015-4-TSA 10” x 15” x 4.25”GMIX-1818-6-TSA 18” x 18” x 6”GMIX-1818-8-TSA 18” x 18” x 8”GMIX-1921-6-TSA 19” x 21” x 6”GMIX-1921-8-TSA 19” x 21” x 8”GMIX-2030-6-TSA 20” x 30” x 6”GMIX-2030-8-TSA 20” x 30” x 8”GMIX-2225-6-TSA 22” x 25” x 6”GMIX-2225-8-TSA 22” x 25” x 8”
• Black uninterrupted valance design• Built-in inner mixer secure fit system• TSA locking latches with impact diversion dishes• 1” interior EPS foam protection• Comfortable ergo-grip handles
Model Weight Interior DimensionsGMIX-12PU-TSA 21.3 lbs 19” x 21” x 7.5”
Gator’s Pop-Up Mixer Series uses the patented Pop-up ratchet system for transporting your mixer flat then elevating to various angles for a quick setup. The compact size allows for smaller transportation area requirements, but this case is big on features. The Pop-up mixers include a high density Polyethylene cabinet, TSA locking latches, threaded rack rails, black uninterrupted valance design, and comfort ergo-grip handles making this a perfect grab-n-go solution.
Valance Design
TSA Locking Latches
Comfort Grip Handle
Check out the video of thisproduct on our website
WATER PROOF MIXER CASES
ATA TSA POP-UP MIXER CASES
ATA TSA MIXER CASES
Patented pop-up ratchet system for transporting your mixer flat then elevating to various angles during use
Check out the video of thisproduct on our website
NEWMODELS
42Mixer
Model Weight Interior DimensionsG-MIX 12X24 14.33 lbs 12” x 24” x 4.25”G-MIX 17X18 16 lbs 17” x 18” x 6.5”G-MIX 19X21 19.80 lbs 19” x 21” x 7”G-MIX 20X25 21 lbs 20” x 25” x 8”G-MIX 20X30 24 lbs 20” x 30” x 6”G-MIX 22X46 32 lbs 22” x 46” x 6.5”G-MIX 24X36 29 lbs 24” x 36” x 6.5”
• Nearly indestructible lightweight polyethylene construction • Angled pad & Velcro® wedge to hold mixer securely • Tricot-lined foam interior and rubber feet• Completely removable lids with breakaway hinges
• Carry handle and pull-out handle and wheels• Recessed locking twist latches
• Spring-loaded carry handle• Recessed lockable twist latches
• Chrome reinforced corners• Pull-out handle & recessed roller blade-style wheels • 3 Spring-loaded recessed handles
Model Weight Interior DimensionsG-MIX-12 PU 19.25 lbs 19.25” x 21” x 6.5”
Gator’s ATA Pop-Up Mixer case uses the patented Pop-up ratchet system for transporting your mixer flat then elevating to various angles in the field. The compact size allows for smaller transportation area requirements. The Pop-up mixer include a high density Polyethylene cabinet, threaded rack rails, spring loaded twist latches, chrome-plated corners, pull-out handle, recessed wheels and spring-loaded handles. This mixer case combines protection with functionality for a complete solution.
ATA MIXER CASES
G-MIX 12X24, G-MIX 20X30,G-MIX 22X46 & G-MIX 24X36 Feature:
G-MIX 19X21 Features:
G-MIX 17X18, G-MIX 20X25 Feature:
ATA POP-UP MIXER CASE
Removable lid with breakaway hinges
Artist Martin Motnik with his Gator gear
43 Mixer
Model Weight Interior DimensionsG-MIX-L 1224 6 lbs 12” x 24” x 5”G-MIX-L 1618A 7 lbs 16.5” x 19” x 6”G-MIX-L 1622 7.72 lbs 16” x 22” x 5”G-MIX-L 1822 10 lbs 18” x 22” x 7”G-MIX-L 1926 12 lbs 19” x 26” x 6”
• Rugged nylon exterior with padded Tricot lining • Constructed of heavy-duty EPS foam• Detachable padded shoulder strap, padded reinforced handles and exterior accessory pocket • G-MIX-L 1618A includes a 20mm padded lid with PE reinforcement and fits A&H Zed-14 Series mixers• G-MIX-L 1926 includes a 20mm padded lid with PE reinforcement and fits A&H Zed-24 Series mixers
Model Weight Interior DimensionsG-MIX-B 0909 2.5 lbs 9” x 9” x 2.75”G-MIX-B 1212 3 lbs 12” x 11.75” x 5.5”G-MIX-B 1515 3 lbs 15.125” x 14.75” x 5.5”G-MIX-B 1815 4 lbs 18.5” x 15” x 6.5”G-MIX-B 1818 4 lbs 18” x 17.75” x 5.5”G-MIX-B 2020 4 lbs 20” x 20” x 5.5”G-MIX-B 2118 5 lbs 21” x 18.5” x 7”G-MIX-B 2123 5 lbs 21” x 23” x 6”G-MIX-B 2519 5 lbs 25” x 19” x 8”
• Rugged Nylon exterior • 5mm spongy foam protection with Tricot lined interior• Removable shoulder strap & comfortable webbed handles • External storage pockets
Model Weight DimensionsGMC-2222 .40 lbs 22” x 22” x 6”
• Rugged plywood covered in ballistic Nylon• Pull-out handle and wheels • Large accessory compartments• Tricot-lined interior
• Perfect for mixers, digital recording workstations and other gear• Constructed of stretchy Lycra • Adjustable cord assures snug fit • Keeps dust off equipment when not in use• Hand washable
Model Weight InteriorDimensions
GPA-720 23 lbs 20” x 13.50” x 13”
LIGHTWEIGHT MIXER CASES
MIXER BAGS
ROLLING MIXER TRANSPORTER
STRETCHY MIXER COVER
Heavy-duty EPS foam covered in Tricot for extra
protection
Spongy foam covered in Tricot cushion the mixer
Model Weight Interior DimensionsGK-LT25W 9.20 lbs 25” x 12” x 3”
• Rolling backpack designed to carry most 25-note controllers and laptop• Exterior storage for interfaces, cables, and other accessories• Removable, retractable wheels and handle • Expandable top accommodates up to 37 note controllers • Rugged Nylon construction with padded interior and inserts to protect gear• Backpack straps can be hidden inside exterior pocket when handle is in use
Model Weight Interior DimensionsGRC-STUDIO4GO-W 21 lbs 17.5” x 19” x 7”
GRC-Series Features:• Rugged ATA-style polyethylene construction• Available with 4U rack rail on the bottom for rack mount recording devices & disk drive • Adjustable laptop compartment with strap tie-downs • Convoluted foam interior in lid • Access hole between top & bottom compartments allow the laptop to be permanently
connected to the recording gear• GRC-STUDIO4GO-W includes retractable handle & wheels
Model Weight Interior DimensionsGSR-2U 15 lbs 13” x 19” x 3.5”
GSR-2U Features:• Designed to be the modern-day recording center • Features 2U of rack rail for rack mount recording devices & disk drive • Padded area above for storing a laptop • Easy zip open front & rear covers • External storage compartment, shoulder strap & padded carrying handles
Laptop compartment in top of case
GRC-STUDIO4GO-W includes wheels and
tow handle
STUDIO-2-GO® SERIES
ROLLING LAPTOP/MIDI CONTROLLER CASE
44Recording
• Water and dust proof with IP 67 certification• ATA-300 Certification• Impact proof lightweight NK-7™ resin• Easy Release Powerclaw™ Latching System• Soft grip comfort handle• Pad-Lockable• Mil-STD-810F Immersion Test Certified
WATER PROOF INJECTION MOLDED CASES
Model Fits
GU-ZOOMH4N-WP Zoom H4N hand heldrecorder and accessories
GU-ZOOMH6-WP Zoom H6 hand heldrecorder and accessories
GU-ZOOM-Q4-WP Zoom Q4 hand heldrecorder and accessories
GU-GOPROHERO3-WP GoPro Hero3 camera and accessories
Check out the video of thisproduct on our website
NEWMODELS
45 Microphone
Spring Loaded Twist Latches
Rubber-GrippedComfort Handles
Reinforced Stackable Protective Ball Corners
Model Weight Mic Drop Depth Interior DimensionsG-TOUR M15 17.64 lbs 5.25” 12.25”x9.5”x8”
Gator’s G-Tour M15 microphone case is where functionality meets durability. The case features 15 foam padded microphone drops and a large storage space for accessories. With Gator’s signature red recessed twist latches, spring-loaded rubber-gripped handles, thick plywood construction and heavy-duty hardware, this case is ready for the road.
• Lightweight Polyethylene construction• TSA locking latches• Black uninterrupted valance
Model Weight FitsGM-15-TSA 5.5 lbs 15 mic dropsGM-30-TSA 6 lbs 30 mic drops
• Lightweight Polyethylene construction• Triple chrome plated locking latches • Compact briefcase design
Model Weight FitsGM-6-PE 4 lbs 6 mic slots
G-TOUR™ M15 MICROPHONE CASE
TSA WIREDMICROPHONE CASES
WIRED MICROPHONE CASES
The G-TOUR M15 features15 foam padded micdrops for a perfect fit
The GM-15-TSAincludes a large
interior storage space
The GM-6-PE features 6 foamform-fitted microphone spaces
Artist Grace Potter with her Gator G-Tour Mic Case
46
GM-4 Features:• Durable Nylon construction• 4 Microphone drops• Web handles & comfort shoulder strap• Interior storage space and exterior storage pocket
Model Weight Mic Drop DepthGM-4 2 lbs 7”GM-12B 3 lbs 5.5”
GM-12B Features:• Durable Nylon construction• Exterior pocket for cables & accessories• Padded shoulder strap for easy transport
• Designed to fit most half rack wireless “In Ear” personal monitoring systems• Storage for transmitter, ear buds, receiver body pack, and power supply• Heavy-duty padded protection with rugged Nylon black exterior• Top access for antenna to be extended while in the bag
Model Weight DimensionsG-IN EAR SYSTEM 3 lbs Up to 8.5” x 8” x 1.75”
GM-12B
GM-4
WIRED MICROPHONE BAGS
IN EAR MONITOR BAG
Check out the video of thisproduct on our website
Adjustable shoulderstrap and comfortable
handle
The GM-12B is specifically designed to hold 12 microphones
• Black waterproof injection molded case, with foam insert to hold microphones• Available to fit 6 or 16 hand held microphones• Water and dust proof with IP 67 certification• ATA-300 Certification• Impact proof lightweight NK-7™ resin• Easy Release Powerclaw™ Latching System• Mil-STD-810F Immersion Test Certified
WATERPROOF MICROPHONE CASES
Model FitsGM-06-MIC-WP 6 Hand Held MicrophonesGM-16-MIC-WP 16 Hand Held Microphones And Accessories
Features layered foam nest to fit 6 microphones
Pad-lockable for extra security
Foam insert to hold 16microphones and
accessories
Artist Evan Brewer with his In Ear Bag
Microphone
47 Microphone
• Black EVA foam shell exterior• Designed to fit most micro recorders, headphones and accessories• Storage for medium size headphones• Storage for SD Media cards, batteries and USB cables• Includes removable shoulder strap
Model Weight Main CavityG-MICRO PACK 2.5 lbs 8” x 10” x 2”
MICRO RECORDER PACK
• Rugged Nylon utility bag for carrying a field recorder • Stores most field recorders, 2 microphones, headphones and cables• One cavity for smaller handheld micro recorders• One cavity for larger format field recorders• Viewable window to see recorder control panel while in bag• Polyurethane foam protection and adjustable shoulder strap
Model Weight Main Cavity Storage Cavity Mic Drops (x2) External PocketsG-BROADCASTER 5 lbs 8” x 10” x 2” 2” x 4” x 8” 2” x 9” 8” x 8” x 2.5”
Model Weight Interior Dimensions Exterior DimensionsGX-33 4 lbs 43” x 8” x 8” 44” x 10.24” x 8.25”
• 3 Separate compartments for microphone stands to prevent scratches & dings • Durable Nylon construction with 5 form fitted microphone drops• Webbed handles and zippered cable pocket
• Nylon 6” screen pop filter• C-clamp will fit most standard microphone stand shafts and booms
Model Weight Fully ExtendedGM-POP FILTER 2.5 lbs 17” x .5” x 6.25”
BROADCAST BAG
MICROPHONE / STAND BAG
MICROPHONE POP FILTER
Side access pockets for external cable entry
Adjustable carrying strap
11.5” Goose neck and clamp
included
Artist Evan Brewer with his In Ear Bag
48Microphone
• Rugged Polyethylene construction with black uninterrupted valance design• TSA locking latches with impact diversion dishes• Comfortable ergo-grip handles
Model Weight Mic Drop Depth Interior Receiver Dimensions (2 Sections)
GM-6W-TSA 5.2 lbs 2.25” x 10.5” N/AGM-7W-TSA 10 lbs 11” 9.5” x 5.5” x 1.75”
• Polyethylene case holds 4 wireless systems with 4 half rack shelves with double sided tape included• Convoluted foam lid and reinforced chrome corners• Recessed chrome twist latches and top mounted carry handle• Carpet lined interior and accessory pocket
GM-7W-TSA Features:• Holds 7 wireless microphones with battery attached (up to 11”) • 2 lift-out trays with 4 adjustable dividers• Protective Tricot-lined interior
GM-6W-TSA Features:• Holds 6 wireless microphones with storage for 18 batteries • Protective foam-lined interior
GM-6W-TSA
GM-7W-TSA
MULTIPLE ATA WIRELESS SYSTEM CASES
Check out the video of thisproduct on our website
GM-7W includes 2 lift out trays with 4
adjustable dividers
GM-6W-TSA features 6 fittedmicrophone and 18 battery slots
Model Weight Mic Drop Depth Interior Receiver Dimensions (2 Sections)
GM-4WR 11 lbs 10.5” 11” x 16” x 1.5”
MULTIPLE ATA WIRELESS SYSTEM CASES
GM-4WR
4 Half Rack Shelves hold 4 wireless
systems
49 Microphone
GM-2W
GM-5W
Model Weight Mic Drop Depth Interior Receiver DimensionsGM-2W 3 lbs 8.5” 8.5” x 8.5” x 3.25”GM-5W 2.65 lbs 8.5” 8.5” x 7” x 4”
GM-5W Features:• Designed to fit 5 wireless systems• Durable rugged Nylon exterior with shoulder strap• Large storage compartment for receivers and accessories
GM-2W Features:• Designed to fit two wireless systems• 2 extra-deep mic drops and compartments for wireless receivers• Durable rugged Nylon exterior with storage compartments and shoulder strap
• Designed for single wireless system to be used in the case• Space for belt pack, microphone, lavalieres, cables, & hand-held microphone• Rugged stackable polyethylene construction • Access for antenna to be extended while in the case and adjustable tray height
Model Weight Mic Drop Depth
Interior Receiver Dimensions
GM-1WP 5 lbs 8.25” 8.5” x 8.5” x 2”
Model Weight Receiver CavityGM-1WEVAA 1.5 lbs 8” x 8” x 1.75”
• Slim rigid 5mm EVA rubber foam design• Holds most common sized “half-rack” wireless units• Front and rear access unzips for easy setup in the field• Storage for receiver, handheld microphone, power supply, belt pack transmitter, and lapel microphones
• Designed for single wireless system to be used in the bag • Access for antenna to be extended while in bag • Space for lavalieres, cables, and wireless mic with receiver mounted• Front & rear access unzips for easy setup in the field • Shoulder strap and information card window
Model Weight Mic Drop Depth Interior Receiver DimensionsGM-1W 4 lbs 8.25” 8.5” x 8” x 2”
WIRELESS SYSTEM BAGS
SINGLE ATA WIRELESS SYSTEM CASE
SINGLE WIRELESS MICROPHONE SYSTEM CASE
SINGLE WIRELESS SYSTEM BAG
Front and rear access for easy setup in the field
Zipper access to allow antenna to be in place and functional while in
the bagCheck out the video of this
product on our website
50Speaker
• G-Tour double speaker cases fit two loudspeakers• Rugged laminated plywood construction• EVA and PE padding for internal protection• Internal cable and accessory storage• Red recessed twist latches and spring-loaded rubber gripped handles • (4) 3” Casters, 2 locking
Model Weight FitsG-TOUR SPKR-212 35 lbs 2-12” EON style speakersG-TOUR SPKR-215 45 lbs 2-15” EON style speakersG-TOUR SPKR-2K8 28 lbs 2 QSC K8 speakersG-TOUR SPKR-2K10 30 lbs 2 QSC K10 speakers
G-TOUR SPKR-2K12 35 lbs 2 QSC K12 orEV ELX112P speakers
• Case for small or large "passport" type PA systems• Hybrid lightweight wood and Nylon construction• Wheels and retractable handle• Removable internal divider for Yamaha style PA• Large external pocket• Reinforced web handle
Model Fits
G-PA TRANSPORT-LG Passport 300 & 500, Fender Passport Venue, Behringer EPA300, Yamaha Stagepas 250M, Stagepas 500, Stagepas 600i
G-PA TRANSPORT-SM Passport 150, Samson XP308i, Yamaha Stagepas 150M,Stagepas 300, Stagepas 400i
Check out the video of thisproduct on our website
G-TOUR™ SPEAKER CASE
PA SYSTEM CASES
Dishes on top allow cases to be stacked
Padded divider with internal storage compartment
51 Speaker
Model Weight Interior DimensionsGPA-712SM 12 lbs 24” x 16” x 14.25”GPA-712LG 13 lbs 27” x 17” x 15.5”GPA-715 14 lbs 28.5” x 18.5” x 16”
• Designed to fit most popular molded speaker cabinets• Bottom of bag has structured foam to cradle the speaker• Durable pull-out handle and 6 wheel assembly (not included on GPA-E15 or GPA-450-515)• Rugged Nylon construction with 10mm side foam• 2 Accessory pockets and 1 large side pocket• Dual zipper design for easy loading
GPA-712GPA-715
GPA-712SM FitsQSC K12Mackie TH-12AJBL PRX612MJBL JRX112MJBL SRX712MBehringer B212D
GPA-712LG FitsMackie SRM450v2JBL MRX512MYamaha MSR400Peavey Impulse 12DEV ELX112PBehringer EUROLIVE B412DSPHarbinger APS12
GPA-715 FitsMackie TH-15ABehringer EUROLIVE B315ABehringer EUROLIVE B215AEV ELX115PJBL EON305JBL EON315JBL EON515JBL EON515XT
GPA-E15 FitsJBL EON15
GPA-450-515 FitsMackie 450/300JBL 515
Model Weight Interior DimensionsGPA-777 16 lbs 27.5”x18”x17.5”
GPA-777 Features:• Heavy-duty Nylon exterior with roto molded Polyethylene base• Retractable tow-handle and Nylon webbed carry handles• Four (4) 100 pound test in-line wheels• Fits EON 15, MACKIE SRM 450, EV SX100 & many other speaker enclosures• 20mm Tricot padded interior and external accessory pocket
Model Weight Interior DimensionsGPA-E15 9 lbs 26” x 15.75” x 15”GPA-450-515 9 lbs 26” x 15.75” x 15”
Check out the video of thisproduct on our website
SPEAKER BAGS
Gator on display
Dual zipper design
52Speaker
Model Weight Interior Dimensions
G-SUB2225-24BAG 21 lbs 26.25” x 24” x 22”
• Nylon exterior with built-in caster plate• 4 Wheels, 2 fixed for control while transporting• Adjustable, removable Nylon strap tow-handle• 4 reinforced lift handles & 2 Nylon web handles to assist placing on sub woofer• 2 protective skid bars• Large external accessory pockets for cables and accessories
Model Interior DimensionsGPA-SPKSTDBG-50 50” x 9” x 9”GPA-SPKSTDBG-50DLX 50” x 9” x 9”GPA-SPKSTDBG-58 57.5” x 16.5” x 2”GPA-SPKSTDBG-58DLX 57.5” x 16.5” x 2”
• Rugged Nylon bag designed for carrying 2 speaker stands• GPA-SPKSTDBG-50 & 58 have 1 compartment• GPA-SPKSTDBG-50DLX & 58DLX have 2 separate compartments to prevent scratching• Webbed handles, carrying strap & heavy-duty zippers
Model FitsG-SUB2118-17 Mackie DLM12S
• G-SUB style bag for smaller 12 inch “cube” style PA subs• 10mm padding• Caster board built into bag with removable tow handle, and nylon web carry handles
Easy drop andflip design
ROLLING SUB WOOFER BAG
CUBE STYLE SUB BAG
SPEAKER STAND BAGS
Large external pockets
53 Speaker
• Speaker cover with hideaway rain cover designed to fit while on speaker stand• Zippered access to speaker front so speaker can function while covered• Access to handles with Velcro® cover• Access to rear control panel allows cables to remain plugged in• Patent pending
Model FitsGPA-SCVR450-515 JBL 515 and Mackie SRM 450
Model Fits ColorGPA-STAND-1-B Single Side BlackGPA-STAND-1-W Single Side WhiteGPA-STAND-2-B Two Sides BlackGPA-STAND-2-W Two Sides White
• A clean, professional look for DJ, corporate, or worship applications• Acoustically translucent material• Machine washable with zippered carry pouch included• Available in white or black
• Stretchy cover designed to fit most tripod style speaker stands• Height stretches from 3.75ft to 7.25ft• Width Stretches From 3.25ft to 4.5ft
• Stretchy dust covers available to fit most 10”-12” and 15” portable speaker cabinets
Model Fits Color
GPA-STRETCH-10-B Stretches to fit most 10” and 12” JBL EON and Mackie SRM style speaker cabinets Black
GPA-STRETCH-10-W Stretches to fit most 10” and 12” JBL EON and Mackie SRM style speaker cabinets White
GPA-STRETCH-15-B Stretches to fit most 15” JBL EON and Mackie SRM style speaker cabinets Black
GPA-STRETCH-15-W Stretches to fit most 15” JBL EON and Mackie SRM style speaker cabinets White
GPA-STRETCH-10-W
GPA-STAND-2-B
Built-in rain jacket easily stores in pocket
Zippered carry pouch included
Check out the video of thisproduct on our website
SPEAKER COVER
SPEAKER STAND ANDSPEAKER COVERS
SPEAKER CABINET COVERS
SPEAKER STAND COVERS
Check out the video of thisproduct on our website
For detailed measurements visit www.gatorcases.com
54DJ
• Nylon construction with thick internal padding• Padded adjustable shoulder strap (not included on backpacks)• Bright orange liner for better visibility in dark clubs or rooms• Ergo-grip reinforced handle
• G-CLUB CDMX-10 is a padded bag available to accommodate most small CD players or 10" mixers• G-CLUB CDMX-12 is a padded bag available to accommodate most large CD players or 12" mixers
Model Description
G-CLUB CDMX-10 Fits American Audio Flex 100, Numark NDX 4, Stanton CMP 800, American DJ QD5 MKll, Rane TT-57 and More
G-CLUB CDMX-12Fits Pioneer CDJ 2000, Numark NDX 800, Stanton C324-NA,
Allen & Heath - Xone:42, Denon DN-X1100 and More
G-CLUB CDMX10
• Padded backpack straps and carry handle• Storage for DJ Serato style interface and external hard drive• Padded laptop pocket and section for audio mixer, DJ mixer, or projector• MP3 storage compartments with grommets for headphones and interior storage for cables with Velcro management• Pocket with custom fit raincoat for bag• Breathable ventilation channel to keep cool while wearing
Model Description
G-CLUB BAKPAK-LG Large bag designed to hold laptop, serato interface, mixer or cd player and accessories
G-CLUB BAKPAK-SM Small bag designed to hold laptop, serato interface and accessories
G-CLUB BAKPAK-LG
Model Description
G-CLUB CONTROL Designed to hold DJ midi controller, laptop & headphones (19" length internal)
G-CLUB CONTROL 25 Fits Numark NS6 and Numark MIXDECKG-CLUB KB CONTROL Fits most 25 note midi control keyboards
• Padded bag to accommodate up to 35 LP’s, with laptop compartment and additional storage for DJ accessories• 4 Exterior pockets hold Serato™ style interfaces and other DJ accessories• G-CLUB-DJ BAG includes strap on back designed to allow the bag to piggy- back to most wheeled luggage
Model DescriptionG-CLUB-DJ BAG Bag holds up to 35 LP's with laptop compartment
• G-CLUB KB CONTROL is designed for most portable midi controller keyboards
• G-CLUB CONTROL is a messenger style bag designed to hold DJ midi controller, laptop & headphones (19" length internal)• G-CLUB CONTROL 25 is a messenger style bag designed to hold DJ controller, laptop & headphones (25" length internal)• 10mm EVA rubber sewn into bottom of bag• Heavy-duty buckles
G-CLUB-DJ BAG
G-CLUB CDMX12
G-CLUB CONTROL
DJ CLUB SERIES ALL FEATURE
DJ CLUB SERIES MIXER BAGS
DJ CLUB SERIES BACKPACKS
DJ CLUB SERIES BAG
DJ CLUB SERIES CONTROLLER BAGS
Bright orange interior for better visibility in dark
clubs or rooms
55 DJ
• Rotational-molded Polyethylene console rack• Rugged nylon dust cover• Heavy-duty rack rail• Molded in carry handles
Model Weight Rack Units Rack DepthGDJ-8X2 12 lbs 8 Top / 2 Front 15.5”GDJ-8X4 14 lbs 8 Top / 4 Front 15.5”GDJ-10X6 18.74 lbs 10 Top / 6 Front 15.5”
Model Description
G-CD2000-WP Custom foam insert to accommodate the Pioneer CDJ-2000 or 2000 Nexus
• Custom foam insert to accommodate the Pioneer CDJ-2000 or 2000 Nexus• Water and dust proof with IP 67 certification• ATA-300 and Mil-STD-810F Immersion Test Certification• Impact proof lightweight NK-7™ resin• Easy Release Powerclaw™ Latching System• Pad-lockable with soft grip comfort handle• Compact for easy storage
Model DescriptionG-TOUR TT1200 Fits 1200 style turntables
• Tour style DJ Turntable case fits most 1200 style turn tables• Ultra-Dur EVA interior padding• Rear access cable ports• Red recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial grade hardware
Model DescriptionG-TOUR CD 2000 Fits Pioneer CDJ-2000 and other like models
• Tour style case designed to fit DJ CD players• Ultra-Dur EVA internal padding• Rear access cable ports• Red recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial grade hardware
MOLDED CONSOLE RACKS
WATERPROOF DJ CASE
G-TOUR™ DJ TURNTABLE CASES
G-TOUR™ CD PLAYER CASES
DJ Keith Shocklee takes Gator to all of his performances
For detailed measurements visit www.gatorcases.com
56DJ
• 1 360 ARM multi-adjustable laptop tray included • Finished in Gator's new Platinum Series laminate• Recessed in-line wheels on most models see chart below• Ultra-Dur EVA interior padding• Recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial grade hardware• See chart below for more details
• Tour style case designed to hold DJ controllers
Model Description Mount Option Arms Included Wheels
G-TOUR DDJT1-S1-ARM1-PL Case for the Pioneer DDJT1 and S1B. Gator ARM included Left / Right 1 YESG-TOUR-DDJ-SX ARM Case for Pioneer DDJ-SX. Gator's ARM included Left / Right 1 YESG-TOUR NS6-ARM1-PL Case for Numark NS6. Gator's ARM included Left / Right 1 NOG-TOUR NS7-ARM1-PL Case for Numark NS7. Gator's ARM included Left / Right 1 YESG-TOURUNICTRL-A-ARM1-PL Fits Numark NS6, Numark N4, Pioneer DDJ-Ergo Left / Right 1 YESG-TOURUNICTRL-B-ARM1-PL Fits Pioneer DDJ-S1, Pioneer DDJ-T1, Numark MixDeck Left / Right 1 YES
G-TOURUNICTRL-C-ARM1-PL Fits Numark Mixtrack and MixtrackPro, Denon MC6000, Vestax VCI-400, Stanton SCS.4DJ, Native Instruments S2 Left / Right 1 NO
• Tour style case designed to hold DJ controllers• Ultra-Dur EVA interior padding• Universal controllers come with adjustable foam pads to fit various controllers• Red recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial grade hardware
Model DescriptionG-TOUR DDJT1-S1 Fits Pioneer DDJT1 and S1G-TOUR NS6 Fits Numark NS6G-TOUR NS7II Fits Numark NS7IIG-TOUR DDJSZ Fits Pioneer DDJSZG-TOURUNICTRL-A Fits Numark NS6, Numark N4, Pioneer DDJ-ErgoG-TOURUNICTRL-B Fits Pioneer DDJ-S1, Pioneer DDJ-T1, Numark MixDeck
G-TOURUNICTRL-C Fits Numark Mixtrack and MixtrackPro, Denon MC6000, Vestax VCI-400, Stanton SCS.4DJ, Native Instruments S2
G-TOUR™ DJ CONTROLLER CASES STANDARD
ALL G-TOUR™ DJ ARM CASES FEATURE:
Integrated cable management
Adjustable heavy-duty grips keep your gear stable
while on theARM 360
All ARM 360 cases come in the new Gator Platinum Series laminate
G-TOUR™ CONTROLLER ARM CASE
Add a second Gator ARM to your controller case
Check out the video of this
product on our website
NEWMODELS
57 DJ
G-ARM 360-CASEMT Features:• 360O arm with mounting kit for adding to Gator DJ ARM cases that have "left/right" mounting• Mounts to any Gator DJ ARM case
G-ARM 360-DESKMT Features:• 360O arm with mounting kit for tables, desktops and other flat surfaces• Mounts to any Gator DJ ARM case or table top surface• Heavy-duty table clamp included
Model DescriptionG-ARM 360-CASEMT DJ Arm with case mounting kitG-ARM-360-DESKMT DJ Arm with desktop mounting kit
Full Range OfExtension
All Feature:• Easily adjustable in 6 directions. 360O horizontal adjustment• Tray included that can accommodate laptop and iPad™ style tablets• VESA mount for VESA monitors up to 22" • Cable management integrated into arm• Durable easy install design
DJ ARM 36O
ARM 360 can hold your iPad™ laptop, monitor or other
electronic device
Multiple configurations available using dual ARM 360
360O
Rotation
58Lighting
Model Fits Dimensions Inside Dividers
G-LEDBAR-4-TSA (4) 1 meter LED Light Bars 41” x 6.2” x 3.5”
• Designed to hold (4) 1 meter LED light bars with clamp(s) attached• 4 heavily padded interior compartments• Nearly indestructible polyethylene construction• 2 TSA locking latches with impact diversion dishes• 200 lb weight capacity, recessed in-line wheels
Model Fits Dimensions Inside DividersG-TOURPAR64LED-8 8 Par-64 LED’s (8) sections 9.5” x 9.5” x 15.5”G-TOUR-LED8-2626 8 LED Panels (8) sections 26” x 26” x 4.5”
• G-Tour cases designed to fit 8 LED PAR 64 or 8 LED panel light fixtures• 12mm thick plywood construction with laminated exterior and tongue and groove extruded aluminum valance• Red recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial grade hardware and reinforced stackable ball corners• 4 Casters, 2 locking
• G-Tour cases designed to fit 8 LEKO style lights• 12mm thick plywood construction with laminated exterior and tongue and groove extruded aluminum valance• Red recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial-grade hardware and reinforced ball corners• Dishes on top of case allow stacking• 4 Casters, 2 locking
Model FitsG-TOUR LEKO-S4 8 LEKO style lights
ATA TSA LED BAR TRANSPORTER
G-TOUR™ LED TRANSPORTERS
G-TOUR™ LEKO TRANSPORTERS
Holds light bars with clamps attached
Individual compartments to keep lights from bumping or
scratching
Casters make moving lights easy
4 casters for easytransportation
59 Lighting
Model Fits DimensionsInside Dividers
G-PAR 38 (8) Par-38’s (8) sections 8.25” x 8.25” x 9.5”G-PAR 64 (4) Par-64’s (4) sections 11” x 11” x 19.75”G-PAR 64LED4 (4) Par-64 LED’s (4) sections 9” x 9” x 9.5”G-PAR 64LED8 (8) Par-64 LED’s (8) sections 9” x 9” x 9.5”G-LEDBAR-4 (4) 1 meter LED Light bars 41” x 6.2” x 3.5”
G-PAR 38, G-PAR 64, G-PAR 64LED4,G-PAR 64LED8 Feature:• Compact rugged Nylon construction• Collapsible design for easy storage • Individual compartments for par cans• Built-in wheels and pull-out handle• Removable Velcro® divider
G-LEDBAR-4 Features:• Designed to hold (4) 1 meter LED light bars with clamp(s) attached• Compact rugged Nylon construction• 4 heavily padded interior compartments• External accessory compartment• Built-in wheels and pull-out handle
G-PAR 38
G-PAR 64G-PAR 64LED4
G-LEDBAR-4
• G-TOUR style case with 1/2 inch plywood construction• Case designed to hold (2) one ton Classic Lodestar style chain hoists• 12mm thick plywood construction with laminated exterior and tongue and groove extruded aluminum valance• Ultra-Dur EVA interior protection• Heavy-duty casters (2 locking and 2 non-locking)• Red recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial grade Gator signature hardware
Model Fits Main Hoist Cavity Chain Cavity
G-TOUR CHAINHOIST-2X1T Two 1 Ton CW Style Chain Hoist (2) 13” x 20” x 21” (2) 10” x 10” x 21”
PAR CAN TRANSPORTERS
G-TOUR™ CHAIN HOIST TRANSPORTER
Piano style hinges with
Nylon lid stays
60Utility
Model Weight Interior DimensionsG-TOURCARRYONFO 18 lbs 19” x 12.5” x 6.5”G-TOUR 12x17 17 lbs 12” x 17” x 7.5”
G-TOURCARRYONFO Includes:• Retractable handle and wheels• Layered diced foam interior
Gator’s G-Tour Carry-on Series provides superior protection while maintaining airlinecarry-on requirements. These cases are constructed of thick plywood covered with a rugged laminated coating and include the G-Tour signature red recessed twist latches, spring-loaded rubber-gripped handles and hardware. The compact size, removablediced foam interior and reinforced stackable ball corners make these cases theperfect carry-on solution.
• Truck pack trunk with hinged lid and grey carpet interior• Thick plywood construction with laminated exterior• Recessed dishes on top of case allows stackablity• Red recessed twist latches and spring-loaded rubber-gripped handles• Heavy-duty commercial-grade hardware • Reinforced stackable ball corners • 4 Casters, 2 locking
Model Weight Interior DimensionsG-TOURTRK3022HS 63 lbs 28” x 20.75” x 20.75”G-TOURTRK4530HS 88 lbs 43” x 28” x 28”G-TOURTRK302212 70 lbs 27.5” x 20.5” x 20.5”G-TOURTRK453012 96 lbs 42.5” x 27.5” x 27.5”
G-TOURTRK302212 and G-TOURTRK453012 Feature:• 12mm plywood construction• Includes divider system• G-TOURTRK302212 Version includes 1 black plywood divider and 2 lift out trays• G-TOURTRK453012 Version includes 3 black plywood dividers and 2 lift out trays
Plywood Lift Out Trays
G-TOUR™ CARRY-ON CASES
G-TOUR™ TRUCK PACK TRUNKS
Diced foam for complete customizing
2 Built-in lift out trays included
61 Utility
TSA LockingLatches
Model Interior DimensionsGX-1015-4-TSA 10” x 15” x 4.25”GX-1818-6-TSA 18” x 18” x 6”GX-1818-8-TSA 18” x 18” x 8”GX-2030-8-TSA 20” x 30” x 8”
Standard CasesModel Interior
DimensionsGXDF-1116-5-TSA 11” x 16.7” x 5”GXDF-1116-8-TSA 11” x 16.7” x 8”GXDF-1224-8-TSA 12” x 24” x 8”GXDF-1919-7-TSA 19” x 19” x 7”GXDF-1919-9-TSA 19” x 19” x 9”GXDF-1921-8-TSA 19” x 21” x 8”GXDF-2225-8-TSA 22” x 25” x 8”
• Polyethylene vacuum form case• Black uninterrupted valance design• TSA locking latches with impact diversion dishes• 1" interior foam protection• Comfortable ergo-grip handlesDiced Foam Version Includes:• Diced foam interior which is easily modified for perfect fit
Diced Foam Cases
• Rotationally molded rolling case• Built-in pressure release valve• Stackable design with recessed wheels• Available with custom foam inserts (minimum 5 pieces) Call for pricing and information
Model Weight InteriorDimensions
ExternalDimensions
GXR-3219-1603 27 lbs 32” x 19” x 19” 35” x 22.5” x 19.5”GXR-4517-1503 41 lbs 45” x 17” x 15” 48” x 20” x 20”GXR-5517-1503 46 lbs 55” x 17” x 15” 58” x 20” x 20”
ATA TSA UTILITY CASES
HEAVY-DUTY ROTO MOLDED ROLLING CASE
Diced foam version includes customizing foam for use for
any application
Pressurerelease valve
GX-PC300 Accessory Case
• Nearly indestructible rotational molded construction• Most sizes available with or without wheels• Several sizes and styles can be cut to custom depths• Custom foam interiors available Call for information and pricing
GX-PC303
GX-PC217
GX-PC1406SD
Model Description Dia./Length Depth WidthGX-PC300 Accessory Case 45” 12” 19”GX-PC304 Compact Accessory Case 36” 12” 16”GX-PC308 Super Compact Accessory Case 30” 12” 14”GX-PC314 Mini Compact Accessory Case 25” 10” 12”GX-PC303 Upright Accessory Case 17” 29” 17”GX-PC217 Square Accessory Case 17” 17” 17”GX-PC1406SD Square Accessory Case 14” 6” 14”
GX-PC308 with wheels
ROTO MOLD UTILITY CASES
62Utility
Model Weight InteriorDimensions
GX-20 18.2 lbs 20.5” x 13.75” x 13.13”GX-22 35 lbs 30” x 24” x 12”
• Separate lift-out storage tray• Exterior storage pocket• Rugged Nylon over 1/2” plywood construction• Wheels & pull-out handle as well as side lift handles• Padded interior
GX-22
GX-20
• Diced foam for customizable interior• Rigid Polymer rubber like stackable exterior• Ergo grip comfort handle• Water resistant zipper with lockable zipper pulls
Model Interior DimensionsGU-0907-05-DF 9.4” x 7.4” x 5.5”GU-1309-06-DF 13.8” x 9.3” x 6.2”
Model Interior DimensionsGU-1510-06-DF 15” x 10.5” x 6.2”GU-1813-06-DF 18” x 13” x 6.9”
CABLE CADDIES
LIGHTWEIGHT UTILITY CASES
Lift-out storage tray
Check out the video of thisproduct on our website
• Padded Nylon carry bag perfect for storing artist merchandise• Stores Audio CD's, Vinyl Records, T-Shirts, and more with adjustable dividers• Wheels and tow handle• 25mm padded tricot interior• 2 Nylon web carry handles• Padded Removable adjustable shoulder strap
MERCHANDISE BAGS
Model Style Interior DimensionsGP-EKIT2816-B Standard 28” x 16” x 16”GP-EKT2816-BW Rolling 28” x 16” x 16”GP-EKIT3616-B Standard 36” x 16” x 16”GP-EKIT3616-BW Rolling 36” x 16” x 16”
STOREYOURMERCH!
Waterproofopen cavity - diced foam - divider
GU-0705-03-WPNFGU-0806-03-WPNFGU-0907-05-WPNFGU-1309-03-WPNFGU-1309-06-WPNFGU-1510-06-WPNFGU-1711-06-WPNFGU-1813-06-WPNFGU-2011-07-WPNFGU-2014-08-WPNFGU-2015-10-WPNFGU-2217-08-WPNFGU-2217-13-WPNF
7.4” x 4.9” x 3.1”8.4” x 6” x 3.7”9.4” x 7.4” x 5.5”13.2” x 9.2” x 3.8”13.8” x 9.3” x 6.2”15” x 10.5” x 6.2”17” x 11.8” x 6.4”18” x 13” x 6.9”20.5” x 11.3” x 7.5”20” x 14” x 8”20.5” x 15.3” x 10.1”22” x 17” x 8.2”22” x 17” x 12.9”
7.4” x 4.9” x 3.1”8.4” x 6” x 3.7”9.4” x 7.4” x 5.5”13.2” x 9.2” x 3.8”13.8” x 9.3” x 6.2”15” x 10.5” x 6.2”17” x 11.8” x 6.4”18” x 13” x 6.9”20.5” x 11.3” x 7.5”20” x 14” x 8”20.5” x 15.3” x 10.1”22” x 17” x 8.2”22” x 17” x 12.9”
GU-0705-03-WPDFGU-0806-03-WPDFGU-0907-05-WPDFGU-1309-03-WPDFGU-1309-06-WPDFGU-1510-06-WPDFGU-1711-06-WPDFGU-1813-06-WPDFGU-2011-07-WPDFGU-2014-08-WPDFGU-2015-10-WPDFGU-2217-08-WPDFGU-2217-13-WPDF
GU-0907-05-WPDVGU-1309-06-WPDVGU-1510-06-WPDVGU-1711-06-WPDVGU-1813-06-WPDVGU-2011-07-WPDVGU-2014-08-WPDVGU-2217-08-WPDV
9.4” x 7.4” x 5.5”13.2” x 9.2” x 3.8”15” x 10.5” x 6.2”17” x 11.8” x 6.4”18” x 13” x 6.9”20.5” x 11.3” x 7.5”20” x 14” x 8”22” x 17” x 8.2”
Soft Grip Comfort Handle
Easy Release Powerclaw™ Latching System
Pressure ReleaseValve To Keep Water Out
Standard Cases Diced Foam Cases
Divider Cases
• Carry case for audio visual recording equipment, electronic equipment, and optical lenses• Water and dust proof with IP 67 certification• ATA-300 certification and Mil-STD-810F immersion test certified• Impact proof lightweight NK-7™ resin• Easy release Powerclaw™ latching system• Soft grip comfort handle and pad-lockable• GU-2011-07-WPNF, GU-2217-13-WPNF, GU-2015-10-WPNF
includes a tow handle and wheels
• Diced foam insert for customizing• GU-2011-07-WPDF, GU-2217-13-WPDF,
GU-2015-10-WPDF includes a tow handle and wheels
DICED FOAM VERSIONS FEATURE:• Adjustable divider system insert• GU-2011-07-WPDV, GU-2217-13-WPDV,
GU-2015-10-WPDV includes a tow handle and wheels
INTERNAL DIVIDER VERSIONS FEATURE
63 Utility
64Laptop/Proj
Model Weight Laptop Tray Expandible Projector Cavity 2 Accessory CompartmentsG-TOURCARRYONPL 20 lbs 15” x 11.125” x 1.5” 9.5” x 7.5” x 4” - 14” x 11” x 4” 5.75” x 2.5” x 4.25” Each
G-TOURCARRYONPL Features:• Adjustable Tricot-covered EPS padded compartment with removable wedges for projectors• Removable EVA foam-padded tray to hold laptop• Convoluted foam lid for snug fit of laptop
Gator’s G-Tour Carry-on provides superior protection while maintaining airline carry-on requirements. This case is constructed of thick plywood covered with a rugged laminated coating and include the G-Tour signature red recessed twist latches, spring-loaded rubber-gripped handles and hardware. The recessed in-line style wheels, retractable handle and reinforced stackable ball corners make this case the perfect carry-on solution.
• Rugged nearly indestructible Polyethylene construction with carpeted interior• Retractable pull-out handle, recessed wheels and lockable TSA approved latches• Heavy-duty aluminum valance and lid-stay• Adjustable Tricot-covered EPS padded projector compartment with adjustable wedges• Removable EVA foam-padded tray to hold laptop
Model Weight Laptop SectionDimensions
Projector Section Dimensions
ExteriorDimensions
GAV-LTOFFICETSA 10.6 lbs 16.5” x 11.125” x 2” 13.5” x 11” x 3.625” 19.375” x 14.5” x 9.75”
• Polyethylene exterior with uninterrupted valance• Secure fit interior for optimum fit of most compact projectors• TSA approved locking latches• Comfortable ergo-grip handle
Model Internal DimensionsGAV-PROJECTOR-SM up to 15” x 10” x 5.5”GAV-PROJECTOR-LG up to 18” x 18” x 6”
• Secure fit interior for optimum fit of most small projectors• Hideaway bottom compartment for cables and accessories
• Secure fit interior for optimum fit of most medium projectors• Internal divider system has built in accessory pouch with dividers for lens storage
GAV-PROJECTOR-SM
Hideaway compartmentin GAV-PROJECTOR-SM GAV-PROJECTOR-LG
G-TOURCARRYONPL includes Lift-out tray for laptop
Removable laptop tray
Check out the video of thisproduct on our website
HEAVY-DUTY PROJECTOR CASE
GAV-PROJECTOR-SM Features:
GAV-PROJECTOR-LG Features:
LAPTOP / PROJECTOR CASE
G-TOUR™ PROJECTOR / LAPTOP CASE
65 Laptop/Proj
• Polyethylene exterior with uninterrupted valance• Secure fit interior for optimum fit of most compact projectors• TSA approved locking latches• Comfortable ergo-grip handle
• Rugged nylon construction• Storage for file folders and business accessories• Meets airline specifications for carry-on or check-in • Removable built-in key chain• Adjustable shoulder strap• Ergo-grip padded handle
Model Weight Laptop SectionDimensions
Projector Section Dimensions
ExteriorDimensions
GAV-LT 3.4 lbs 15.75” x 11.5” x 2.5” N/A 17” x 13” x 4.75”GAV-LTOFFICE 5.2 lbs 16.25” x 13.25” x 1.5” 16.5” x 13.75” x 4” 17.25” x 15.5” x 8”GAV-LTOFFICE-W 10 lbs 16” x 13.75” x 2.25” 16” x 13.75” x 3.5” 19” x 10.5” x 14”
GAV-LTOFFICE-W For Laptop & Office Peripherals Includes:• Retractable tow-handle and wheels• Separate adjustable cable storage also acts as an internal divider for projector section
GAV-LT For Laptop & Office Peripherals Includes:• Checkpoint friendly fold-out design folds flat to pass through TSA X-Ray machines
GAV-LTOFFICE For Laptop & Office Peripherals Includes:• Checkpoint friendly tri-fold design allows both the laptop and projector sections to fold flat to pass through TSA X-Ray machines• Separate adjustable cable storage also acts as an internal divider for projector section
GAV-LT-OFFICE
GAV-LT-OFFICE
GAV-LTOFFICEGAV-LTOFFICE-W
GAV-LTOFFICE-W
• Secure fit interior for optimum fit of most small projectors• Hideaway bottom compartment for cables and accessories
• Secure fit interior for optimum fit of most medium projectors• Internal divider system has built in accessory pouch with dividers for lens storage
Rear strap on GAV-LTOFFICEallows it to be securely stacked on GAV-LTOFFICE-W by sliding
over tow-handle
GAV-LTOFFICE has a tri-fold security checkpoint design with
plastic see through cover to keep items in placeInterior is customizable for
several applications. Shown with portable printer and scanner
Business style pockets for holding pens, mice, pointers, keys and
other accessories
ATA LAPTOP / PROJECTOR / GEAR BAGS
HEAVY-DUTY PROJECTOR CASE
GAV-PROJECTOR-SM Features:
GAV-PROJECTOR-LG Features:
66
All Feature• Lift height positions up to 60” (center mounting bracket heights). Includes universal mounting bracket• Thick plywood construction with durable laminated exterior and carpet covered interior• External dry erase writing label for identification• Durable latches and four extra heavy-duty industrial casters (two locking)
*Lift 65 case has 6 casters (two locking)• Self adhesive “Tilt Watch” indicator to warn and notify of improper handling during transport
G-LIFT Series Features:• Non-electric hydraulic assisted lift case, extends smoothly
with a load of up to 125 lbs• Built in access door for power connection• Laptop tray fits on front, left or right sides of case and stores
inside the case for transport• Includes presentation drape that covers case and frame
Model Weight Interior LCDSpace
Exterior Dimensions
G-TOURLCDLIFT55 297 lbs 54” x 34” x 10” 55.9” x 52.4” x 24.4”G-TOURLCDLIFT65 340 lbs 66” x 38” x 10” 69.9” x 56.4” x 24.4”
Black Case Drape
Removable Laptop Tray Tilt Watch Indicator & Dry Erase Label
Gator’s G-Tour Series LCD / Plasma cases offer superior quality and protection with functionality. All G-Tour cases are constructed of heavy-duty plywood with a laminated exterior for added durability. The cases include the Gator signature red twist latches and spring-loaded rubber gripped handles. The heavy-duty commercial-grade hardware and reinforced ball corners are made to withstand constant transport.
G-TOURLCDV2-2632, 3743, 4350, 5055, 6065 Versions Feature:• Attached caster board with 4 wheels, 2 of which are locking *minor assembly for casters• Ultra-DUR EVA interior protection• Easily adjustable interior• Extra wide caster board to prevent tipping
G-TOURLCDV2-3743-X2, 4350-X2, 5055-X2, 6065-X2 Versions Feature:• Holds 2 screens securely• Attached caster board with 4 wheels, 2 of which are locking *minor assembly for casters• Ultra-DUR EVA interior protection• Easily adjustable interior
G-TOURLCDV2-6065
G-TOUR™ LCD CASES
G-TOUR™ LIFT SERIES
Check out the video of thisproduct on our website
LCD/PLASMA
67 LCD/PLASMA
Model Interior Dimensions Description
G-TOURLCDV2-2632 32.5” x 25.5” x 6.3” Fits most 26” to 32” ScreensG-TOURLCDV2-3743 43” x 30.5” x 6.3” Fits most 37” to 43” ScreensG-TOURLCDV2-3743-X2 (2x) 43” x 30.5” x 6.3” Fits two 37” to 43” ScreensG-TOURLCDV2-4350 58.33” x 36.25” x 9” Fits most 43” to 50” ScreensG-TOURLCDV2-4350-X2 (2x) 49.5” x 30.5” x 6.3” Fits two 43” to 50” ScreensG-TOURLCDV2-5055 55” x 35” x 6.3” Fits most 50” to 55” ScreensG-TOURLCDV2-5055-X2 (2x) 55” x 35” x 6.3” Fits two 50” to 55” ScreensG-TOURLCDV2-6065 62.5” x 36” x 6.3” Fits most 60” to 65” ScreensG-TOURLCDV2-6065-X2 (2x) 62.5” x 36” x 6.3” Fits two 60” to 65” Screens
• Electric lift mechanism• Heavy-duty EVA rubber nesting• Collapsible internal lid encloses case, giving it a
clean presentation when in use• Self contained electrical power cord
Spring Loaded Twist Latches
Rubber-GrippedComfort Handles
Reinforced Stackable Protective Ball Corners
Model Fits
G-TOUR ELIFT 42 Screens up to 42”G-TOUR ELIFT 47 Screens up to 47”G-TOUR ELIFT 55 Screens up to 55”
G-TOURLCDV2-4350
G-TOURLCDV2-2632
Collapsible Internal Lid
Self Contained Electrical Cord
Attached Control
Heavy-Duty Nesting
G-TOUR™ ELIFT SERIES Features:
Check out the video of thisproduct on our website
Divider is movableto fit monitor
Single version shown2X Versions include a built-in divider
system to hold 2 screens securely
68LCD/PLASMA
Model Screen Size
G-LCD-2632 Fits Most 26" - 32” ScreensG-LCD-4042 Fits Most 40" - 42” ScreensG-LCD-4647 Fits Most 46" - 47” ScreensG-LCD-5055 Fits Most 50" - 55” ScreensG-LED-3747-2X Fits Two 37”- 47” LED ScreensG-LED-5055-2X Fits Two 50”- 55” LED Screens
• Virtually indestructible LLDPE Polyethylene lightweight plastic construction• (2) Unbreakable, molded-in handles on base for lifting and loading• Aluminum extrusion handles for lid removal • Built-in dry erase white board to label contents• Heavy-duty 3” casters with rubber wheels; includes two swivel casters with brakes and two fixed casters for control and steering• Heavy-duty 1.5” nylon web straps and YKK buckles secure lid to base• Molded end supports with foam lining protect screen from shock• Integrated “UP” arrows notify shippers to keep upright during transport• Will accommodate most screens with pedestal stand attached• The black case is made from 100% recycled material• G-LED-3747-2X & G-LED-5055-2X each fit 2 LED screens per case & adjust from 1.5” to 3” depth• Patent pending
Gator’s G-LCD series is designed to offer serious protection and easy mobility to a wide range of consumer and commercial LCD / Plasma screens, with a price tag that still makes sense for today’s value priced LCDs. Rotationally molded from rugged polyethylene plastic and featuring a unique molded screen support system, the G-LCD is sure to be the new standard in LCD transport. Made in the USA from recycled materials.
Made From Recycled Materials
Double LED Interior
Single LCD Interior
Available Colors
ROTATIONALLY MOLDED LCD/PLASMA CASE
Check out the video of thisproduct on our website
PUORGR YERE BLEB PG R
G
GG
Grey Granite Red Granite Purple Granite Black Red Blue Green Yellow Orange Purple
69 LCD/PLASMA
• Compact carry case for flat screen monitors• Lightweight EPS construction with EVA reinforcement• Internal padded straps to restrain the monitor• Storage compartment for cables and other peripherals• Soft adjustable base support• Ergo grip carry handle and padded shoulder strap
• Heavy-duty water barrier nylon exterior• Rigid polyethylene sheet sewn into liner for protection• 10mm protective padding with Tricot interior• Rear access for using cover when screen is on mount• External document pocket
Model DescriptionG-LCDCOVER-42 Fits 42” ScreensG-LCDCOVER-52 Fits 52” ScreensG-LCDCOVER-65 Fits 65” Screens
PLASMA SCREEN COVERS
Model Description
G-MONITOR2-GO19 Fits up to 19” flat screen monitors
G-MONITOR2-GO22 Fits up to 22” flat screen monitors
• Lightweight LCD monitor carry case great for iMac™ and many other monitors• Lined polyethylene foam interior and 600 Denier nylon exterior• Tricot-covered Velcro® adjustable interior blocks for various sized
monitors and bases• Rugged nylon web carry handle and exterior expandible accessory pocket• Exterior viewable document and 2 viewable business card pockets
Model Weight Interior DimensionsGL-LCD-1922 9.6 lbs 20.5” x 19” x 9.5”GL-LCD-2224 13 lbs 25” x 20” x 9.5”
LCD MONITOR CASES
MONITOR2-GO
Built-in storage for cables and accessories
Rear access cut-out for covering screen when mounted
The iD Series from Gator Frameworks offers the ultimate in innovation, style, ergonomics, and durability. The features in this series have been tirelessly researched and refined during the various development stages. The result is the finest stand products to date. Functionality, ease of use, and a light weight set these products apart and truly create the Gator Frameworks iD.
iD Series Features
70Frameworks
MICROPHONES T A N D
GFW-ID-MIC
Min Height: 40 Inches / 1016 mm
Max Height: 63 Inches /1600 mm
Max Boom Length: 30 Inches / 762 mm
We sup
port your m
usic... literally.
Contemporary Design
Sleek Cylindrical Design Offers Unique And
Stylish Presentation For Stage Or Studio
EasyOperation
Comfort Grip Twist Clutch For Height
Adjustment Adjusts From 40 Inches
To 63 Inches
Boom Arm
Telescoping Boom Expands From 15
To 30 Inches
CompactStorage
Unique Cam LockAllows For Easy Break Down And Compact
Storage
Multiple Patents Pending
71 Frameworks
Available In Single Or Set
Min Height: 53.5 Inches / 1359 mm
Max Height: 74.75 Inches /1898 mm
Base Diameter: 48 Inches / 1219 mm
SPEAKERS T A N D
We sup
port your m
usic... literally.
Carry BagIncluded In Set
SpeakerMount
Adapter Allows For Proper Fit With Speakers That Have 35mm Or 38mm
Mounting Holes
EasyOperation
Height Adjustment Made Easy With Locking
Cam. Adjusts From53.5 Inches To 74.75
Inches
LIFTEEZ
Self Lifting Center TubePiston Lifts Speaker
For You
CompactStorage
Unique Cam LockAllows For Easy Break Down And Compact
Storage
LevelingLeg
Extendable Leg For Uneven Surfaces Allows
Speaker To Remain Stable AndBalanced
GFW-ID-SPKR GFW-ID-SPKRSET
Multiple Patents Pending
72Frameworks
We sup
port your m
usic... literally.ourbrand
Gator Frameworks was developed by musicians and audiophiles that are passionate about their gear. Every stand must meet the scrutiny of the product designers that “yes, this is the one I would choose to buy and use on stage, at work or in my home”.
From the get go we wanted to do something new, something that looked sleek and that worked better than anything out there in the market today. From this ideology was born what we call our iD series, which is truly a new stand line from the ground up and is our iD in the market. This series incorporates clean lines that allow them to easily be stored and look elegant when in use. All the mechanisms were diligently thought through and tested to ensure they not only looked great but they worked in a way that was natural and easy to use.
At the core of all Gator Frameworks product design is the mission for it to be easy to operate and to hold up to extensive use. The handles, knobs and mechanisms are designed to operate in the most instinctive way and to feel comfortable in your hand. Our goal is to humanize every product. We utilize only the best of materials and have added attributes from the inside out such as thicker extrusion and anodized parts to every product to ensure that they will sustain the rigors of the field.
In the end our mission is to create products that you do not have to worry about. Products that do their job so that you can focus on what you are passionate about: your music.
The focus of Gator Frameworks is to ensure that every point that you operate your stand feels comfortable in your hand and functions smoothly. Every latch, clutch, knob and lever has been researched and designed around your hand to protect it and to make it smooth to operate. Functionally every stand is designed to operate as simply and natural as possible. Fine details like matte finished surfaces are a deliberate step to make the stand less intrusive on its environment whether at home or on the stage.
Proprietary Rubber Boom EndsSafety Trim
Single Handed Clutch Stylish and Ergonomic Adjustment Knobs
Quick Release Keyboard Stand Adjustments
73 Frameworks
• Numerous Levels Of Adjustability• Rubberized Leveling Foot• Heavy Duty Steel Construction With Easy Adjustability• Min / Max Height: 3 /40 Inches (152/990 mm)• 100Lb Weight Capacity (45 kg)• Locks Closed to Easily Carry and Store
ModelGFW-KEY-1000X
X-STYLE KEYBOARD STAND
• Numerous Levels Of Adjustability• Double Brace Design• Rubberized Leveling Foot• Heavy Duty Steel Construction With Easy Adjustability• Min/ Max Height: 6/39 Inches (152/990 mm)• 200Lb Weight Capacity (90 kg)• Locks Closed to Easily Carry and Store
ModelGFW-KEY-2000X
HEAVY-DUTY X-STYLE KEYBOARD STAND
• Deluxe Wrapped Thick Padded Seat Cushion• Heavy-Duty Steel Construction• Adjustable Height• Rubberized Leveling Feet• Folds Up Easily for Storage
Model Seat ColorGFW-KEY-BNCH1 Black seatGFW-KEY-BNCH2 Brown seat
KEYBOARD BENCH
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
• Numerous Levels Of Adjustability• Double Brace Design• Rubberized Leveling Foot• Heavy Duty Steel Construction With Easy Adjustability• Min/ Max Height Main Frame: 22/38 Inches (965/558 mm)• 175Lb Weight Capacity With Additional 75Lb Weight Capacity On Upper Tier (80kg / 34kg)• Locks Closed to Easily Carry and Store
DELUXE 2 TIER KEYBOARD STAND
ModelGFW-KEY-5100X
• Heavy Duty Keyboard and Utility Table Great For Keyboards, Mixers and DJ Coffins• Multi Point Adjustability• Min / Max Height: 26/40 Inches (660/1016 mm)• Min / Max Width: 29/44 Inches (736/1117 mm)• Built In Bubble Level For Easy Set-Up• 132 Lb Weight Capacity (60 kg)
HEAVY-DUTY ADJUSTABLE UTILITY TABLE
ModelGFW-UTILITY-TBL
Table easily folds for storage
Built-in bubble level
74Frameworks
Check out the video of thisproduct on our website
• Available to hold 1, 2 or 3 Acoustic or Electric Guitars• Finish Friendly Rubberized Cradle Padding• Durable Neck Restraint• Red Safety Trim On Feet (Removable)• Heavy Duty Steel Construction
Model HoldsGFW-GTR-1000 1 Acoustic or Electric GuitarGFW-GTR-2000 2 Acoustic or Electric GuitarsGFW-GTR-3000 3 Acoustic or Electric Guitars
GUITAR STANDS
• Holds Acoustic or Electric Guitar• Finish Friendly Rubberized Cradle Padding• Adjustable For Smaller Instruments• Compact Design• Heavy Duty Steel Construction
ModelGFW-GTRA-4000
A-FRAME GUITAR STAND
• Tilt Back Design Accommodates Most Combo Guitar Amps• Rubberized Leveling Foot• Heavy Duty Steel Construction With Easy Adjustability• 176Lb Weight Capacity (80 kg)• Min/ Max Height: 5/20 Inches (127/508 mm)
ModelGFW-GTR-AMP
GUITAR AMP STAND
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
75 Frameworks
• Collapsible Tripod Base• Soft Grip One Handed Height Adjustment Clutch• Min / Max Height: 10/99 Inches (254mm 2515 mm)• Cable Management Included • Heavy Duty Steel Construction• Red Safety Trim On Feet (Removable)• Fits Both US and Euro Mic Clips
DELUXE TRIPOD MIC STANDWITH TELESCOPING BOOM
ModelGFW-MIC-2120
• Collapsible Tripod Base• Soft Grip One Handed Height Adjustment Clutch• Min / Max Height: 13/95 Inches (330/2413 mm)• Cable Management Included • Heavy Duty Steel Construction• Red Safety Trim On Feet (Removable)• Fits Both US and Euro Mic Clips
DELUXE TRIPOD MIC STANDWITH BOOM
ModelGFW-MIC-2110
• Collapsible Tripod Base• Soft Grip One Handed Height Adjustment Clutch• Min / Max Height: 37/67 Inches (940/1702 mm)• Cable Management Included • Heavy Duty Steel Construction• Red Safety Trim On Feet (Removable)• Fits Both US and Euro Mic Clips
DELUXE TRIPOD MIC STAND
ModelGFW-MIC-2100
• Collapsible Tripod Base• Soft Grip Height Adjustment Twist Clutch• Min / Max Height: 6/99 Inches (152/2515 mm)• Cable Management Included • Heavy Duty Steel Construction• Red Safety Trim On Feet (Removable)• Fits Both US and Euro Mic Clips
TRIPOD MIC STAND WITHTELESCOPING BOOM
ModelGFW-MIC-2020
• Collapsible Tripod Base• Soft Grip Height Adjustment Twist Clutch• Min / Max Height: 10/94 Inches (254/2387 mm)• Cable Management Included • Heavy Duty Steel Construction• Red Safety Trim On Feet (Removable)• Fits Both US and Euro Mic Clips
TRIPOD MIC STANDWITH BOOM
ModelGFW-MIC-2010
• Collapsible Tripod Base• Soft Grip Height Adjustment Twist Clutch• Min / Max Height: 34/68 Inches (863/1727 mm)• Cable Management Included • Heavy Duty Steel Construction• Red Safety Trim On Feet (Removable)• Fits Both US and Euro Mic Clips
TRIPOD MIC STAND
ModelGFW-MIC-2000
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
76Frameworks
• 12 Inch Weighted Base• No-Slip Vibration Reducing Gasket• Min / Max Height: 40/63 Inches (1016/1600 mm)• Soft Grip One Handed Height Adjustment Clutch• Cable Management Included• Heavy Duty Steel Construction• Fits Both US and Euro Mic Clips
DELUXE 12" ROUND BASEMIC STAND
ModelGFW-MIC-1201
• 12 Inch Weighted Base• No-Slip Vibration Reducing Gasket• Min / Max Height: 36/65 Inches (914/1651 mm)• Soft Grip Height Adjustment Twist Clutch• Cable Management Included• Heavy Duty Steel Construction• Fits Both US and Euro Mic Clips
12" ROUND BASEMIC STAND
ModelGFW-MIC-1200
• 10 Inch Weighted Base• No-Slip Vibration Reducing Gasket• Min / Max Height: 40/63 Inches (1016/1600 mm)• Soft Grip One Handed Height Adjustment Clutch• Cable Management Included• Heavy Duty Steel Construction• Fits Both US and Euro Mic Clips
DELUXE 10" ROUND BASEMIC STAND
ModelGFW-MIC-1001
• 10 Inch Weighted Base• No-Slip Vibration Reducing Gasket• Min / Max Height: 36/65 Inches (914/1651 mm)• Soft Grip Height Adjustment Twist Clutch• Cable Management Included• Heavy Duty Steel Construction• Fits Both US and Euro Mic Clips
10" ROUND BASEMIC STAND
ModelGFW-MIC-1000
• Short Microphone Stand With A Compact Base• Includes 16” Single Section Boom• Base Weighted For Balance And Stability• Cable Management Included• Heavy Duty Steel Construction• No Slip Vibration Reducing Gasket• Fits Both US and Euro Mic Clips
BASS DRUM & AMPMIC STAND WITH BOOM
ModelGFW-MIC-0821
• Short Microphone Stand• Collapsible Tripod Base• Includes Telescoping Boom• Cable Management Included• Heavy Duty Steel Construction• Red Safety Trim On Feet (Removable)• Fits Both US and Euro Mic Clips
BASS DRUM & AMPTRIPOD MIC STAND WITH TELE BOOM
ModelGFW-MIC-2621
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Check out the video of this
product on our website
77 Frameworks
Vibration Reducing Gasket
All Frameworks Round Base mic stands are equipped with a gasket. The mic stand base’s rubber profile reduces undesirable vibration and footfall noise. Damage to flooring is also prevented.
• No-Slip Vibration Reducing Base Gasket• Soft Grip Height Adjustment Twist Clutch• Min / Max Height: 10/15 Inches (254/381 mm)• Cable Management Included• Heavy Duty Steel Construction• Fits Both US and Euro Mic Clips
6" ROUND BASE DESKTOP MIC STANDWITH TWIST CLUTCH
ModelGFW-MIC-0601
• No-Slip Vibration Reducing Base Gasket• 9 Inch Height (228 mm)• Cable Management Included• Heavy Duty Steel Construction• Fits Both US and Euro Mic Clips
6" ROUND BASE DESKTOP MIC STAND
ModelGFW-MIC-0600
• 26 Inch (711 mm) Microphone Stand Boom • Cable Management Included• Length and Angle Independently Adjustable• Heavy Duty Steel Construction• Fits Both US and Euro Mic Clips
MICROPHONE STANDSINGLE SECTION BOOM
ModelGFW-MIC-0010
• Cable Management Included• Max Length 30 inches (762 mm)• Length and Angle Independently Adjustable• Heavy Duty Steel Construction• Fits Both US and Euro Mic Clips
MICROPHONE STANDTELESCOPING BOOM
ModelGFW-MIC-0020
• Lightweight Collapsible Desktop Microphone Stand • Clip Included For Standard Hard wired Microphones• Great For Remote Podcast Interviews• Fits Both US and Euro Mic Clips
MINI TRIPOD DESKTOP MIC STANDFOR WIRED MICS
ModelGFW-MIC-0250
• Lightweight Collapsible Desktop Microphone Stand • Clip Included For Wireless Microphones• Great For Remote Podcast Interviews• Fits Both US and Euro Mic Clips
MINI TRIPOD DESKTOP MIC STANDFOR WIRELESS MICS
ModelGFW-MIC-0251
STANDARD MIC CLIP WIRELESS MIC CLIP
ModelGFW-MIC-CLIP
ModelGFW-MIC-CLIPW
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
78Frameworks
• Multi Angle Adjustability Both Vertically and Horizontally• Adjustable Sliding Back Brace for Added Security• Rubberized Mounting Surface To Protect Your Speaker From Scratches• Can Hold Speaker Up To 100 lbs (45 kg)
WALL MOUNTING SPEAKER POLES
ModelGFW-SPK-WM100 (Set of Two)
• Rubberized Pedestal Surface to Protect Your Speakers• Wide Base Design For Stability• Min / Max Height: 31/50 inches (787/1270 mm)• Can Hold Speaker Up To 100 lbs (45 kg)
STUDIO MONITOR STANDS
ModelGFW-SPK-SM50 (Set of Two)
• Dual Diameter Inner Tube For 35mm and 38mm Speaker Mount• Red Safety Trim On Feet (Removable)• 125 Lb Weight Capacity (56 kg)• Min / Max Height: 48/81 Inches (1219/2057 mm)• Double Speaker Stand Bag Included (set only)
DELUXE ALUMINUM SPEAKER STAND
ModelGFW-SPK-2000GFW-SPK-2000SET (Set of Two with Bag)
• Lift-EEZ Self-Rising Center Tube Piston Helps Lift Speaker For You• Red Safety Trim On Feet (Removable)• Dual Diameter Inner Tube For 35mm and 38mm Speaker Mount• 125 Lb Weight Capacity (56 kg)• Min / Max Height: 48/75 Inches (1219/1905 mm)• Double Speaker Stand Bag Included (set only)
DELUXE ALUMINUM LIFT-EEZ SPEAKER STAND
ModelGFW-SPK-3000GFW-SPK-3000SET (Set of Two with Bag)
Check out the video of thisproduct on our website Check out the video of this
product on our website
79 Frameworks
• Soft Grip One Handed Height Adjustment Clutch• Collapsible Design• 19 Inch Width (482 mm)• Min / Max Height: 26/43 Inches (863/1092 mm)• Red Safety Trim On Feet (Removable)
DELUXE TRIPOD SHEET MUSIC STAND
ModelGFW-MUS-2000
• One Handed Friction Height Adjustment• Removable Rubberized Feet• 19 Inch Width (482 mm)• Min / Max Height: 26/48 Inches (863/1219 mm)
LIGHTWEIGHT SHEET MUSIC STAND
ModelGFW-MUS-1000
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
ModelGFW-LIGHT-LS1
LIGHTWEIGHT ALUMINUM LIGHTING STAND• Lightweight aluminum lighting stand• 10 Foot 6 Inch max height• Can accommodate up to 8 lighting fixtures• 4 Foot Top T-BAR arms• Two 2 foot extension arms• Heavy-duty cross brace trussing• Red Safety Trim On Feet (Removable)
• Lightweight aluminum lighting truss System• 10 Foot 6 Inch max height• 13 Foot Width• 4 Foot Top T-BAR arms• Heavy-duty cross brace trussing• Red Safety Trim On Feet (Removable)
ModelGFW-LIGHT-LT1
LIGHTWEIGHT ALUMINUM LIGHTING TRUSS SYSTEM
For detailed measurements visit www.gatorcases.com
80Frameworks
• VESA Mount For Universal Mounting (compatible with both 100x100 and 200x200 hole patterns)• LiftEEZ Self-Rising Center Tube Piston Helps Lift LED/LCD For You• Heavy Duty Steel Construction• Min / Max Height: 50/80 Inches (1270/2032mm)• 125Lb Weight Capacity (56 kg)• Red Safety Trim On Feet (Removable)• Easy Release For One Person Operation
ModelGFW-AV-LCD-2
PRO LCD STAND
• VESA Mount for Universal Mounting (compatible with both 100x100 and 200x200 hole patterns)• Easy Release For One Person Operation• Heavy Duty Steel Construction• Min / Max Height: 50/73 Inches (1270/1854 mm)• 125Lb Weight Capacity (56 kg)• Red Safety Trim On Feet (Removable)
ModelGFW-AV-LCD-1
DELUXE LCD STAND
• Tray Adjusts To Fit iPad™, iPad 2™, And Most Other Large Format Tablets• Tray Can Be Configured In Landscape Or Portrait Mode• Multi-Angle Viewing Adjustability• Clamps Onto Anything Less Than 1.25” (32mm)• Great For Mic Stands, Drum Hardware, Desks, And Guitar Amps• Lightweight Durable Construction
ModelGFW-UTL-TBLTCLMP
LIGHTWEIGHT TABLET CLAMP
• Tray Adjusts To Fit iPad™, iPad 2™, And Most Other Large Format Tablets• Tray Can Be Configured In Landscape Or Portrait Mode• Multi-Angle Viewing Adjustability• Mount Threads Onto Most Microphone Stands• Lightweight Durable Construction
ModelGFW-UTL-TBLTMNT
LIGHTWEIGHT TABLET MOUNT
Check out the video of thisproduct on our website
Check out the video of thisproduct on our website
Our Custom Cases Include But Are Not Limited To:
Gator Custom Offers Several Options:
Work boxesOversized LCD screensAthletic CasesCable TrunksTool Boxes
Computer CasesWorkstationsMultiple Instrument CasesWardrobesLighting Cases
Rugged wood panels in 1/4”, 3/8” and 1/2” thicknesses
ABS laminate exterior available in several colors*
Interior finished with painted coating, carpet, softor rigid foam available in several thicknesses
Doghouses and caster boards made from top qualityBaltic Birch to prevent warping
4” Casters in locking or non locking, standard or heavy-duty versions
Tilt-and-go style wheels with tow-handle options available
Spring-loaded recessed latches and handles with grip
Folding table legs and so much more!
If You Can Dream It......We Can Build It
*colors may vary
81 Custom
18922 N. Dale Mabry HwyLutz, FL 33548
P: 813.221.4191F: 813.221.4181
©Gator Cases 2014. Subject To Change Without Notice. All Rights Reserved
www.gatorcases.com
by