Catalog 2014 Energy training solutions - Schneider · PDF file2 Modular offers catalog 2014...

™

Energy training solutionsModular offers

Catalog 2014

2 Modular offers catalog 2014

The modular offersThe modular offers are designed for studying and setting up pro-ducts used in the residential, small services and industrial sectors.The purpose of a modular offer is to enable users to create their own configurations using energy training modules mounted on a supporting structure. These energy training modules are designed to be linked and powered via a uniform connector in complete safety.

The operational parts of the modular offer can be used to connect a control part to a system in order to simulate a simple real-life process; these control parts are also designed to connect to certain operational parts of the 2013-2014 energy training solutions catalog, by means of either converter sockets or D-sub connectors. The auxiliary parts of the modular offer are designed to ensure that a configuration works correctly.

The Modular Offers are made up of a variety of specific automation and energy management components, depending on the offer type. There are seven offers:

• The KNX modular offer for setting up components for the buildings and small services sectors. • The Residential and Small Services modular offer for setting up the components of an electrical installation for the home and small service industries.• The Solar modular offer for learning about the production of energy by solar panels.• The iRIO Telemetry offer for optimising energy consumption.• The Industry modular offer (control systems, motor starters & machine safety) for setting up automation solutions.

Each modular offer can be tailor-made by buying the modules separately.

Rail structure to hold the various modules

Examples of modules

Strengths :• Scalable solution• Space-saving and easy to store• Quick to install • Allows various configurations with

no wiring restrictions• Safety and connection ensures a

long service life for connectors

www.schneider-electric.com

Structure of the catalogTo help you in your choice, this catalog is divided into various sections :

Building management modules

Solutions for implementing an electrical installation in complete safety in the small services and buildings sector.Global energy management modules

Systems for working with renewable energies and for energy management

Process and machine management modules

• Industrial and communication control systems:Solutions for finding out about programming and communication between systems.• Automated systems:Solutions for implementing automated systems or production lines.• Industrial control and machine safety:Solutions for studying the basic components of automated systems and machine safety.• Variable speed drive and motion control:Variable speed drive systems for synchronous, asynchronous and brushless motors.

Accessories and additional modules

3Modular offers catalog 2014

Fuller, more segmented, the new document structure Energy training solutions 2014, comes in three catalogs :

• Energy training solutions 2013 - 2014• Energy training solutions - Modular offers• Energy training solutions - BIP BOP program Energy training solutions

2013 - 2014Energy training solutions

Modular offersEnergy training solutions

BIP BOP program

Your new catalogs :Technical education

Educational

solutionsCatalogue 2013 - 2014

™

Energy training solutionsModular offers

Catalog 2014

™

Educational solutions2013pour répondre aux besoins de la formation professionnelleto meet the needs of vocational trainingpara responder a las necesidades de la formación profesional


Index by referenceReference Designation PageMD1AM0 001 ZELIO PLC module 73MD1AM0 002 TWIDO PLC module 73MD1AM0 003 M340 PLC module 74MD1AM0 004 PREMIUM PLC module 74MD1AM0 005 16 discrete input PLC interface module 75MD1AM0 006 16 discrete output PLC interface module 75MD1AM0 007 4 analogue input/output PLC interface module 76MD1AM0 008 XBTR411 panel control module 76MD1AM0 009 XBTGT4340 panel control module 77MD1AM0 010 Ethernet hub module (see Alvidis hub) 77MD1AM0 011 Modbus field distributor module 78MD1AM0 012 XBTGTW450 panel control module 78MD1AM0 013 PREMIUM PLC module with counter 79MD1AM0 014 High-speed counter module 79MD1AM0 015 USB interface simulator module 80MD1AM0 016 HMISTU855 terminal module 81MD1AM0 018 ZELIO COM PLC module 81MD1AM1 001 TeSys U module 91MD1AM1 002 1.6 A magnetic protection module 91MD1AM1 003 Thermal-magnetic protection module 92MD1AM1 004 4 A magnetic protection module 92MD1AM1 005 Vario switch module 93MD1AM1 006 Fused (off-load) isolator module 93MD1AM1 007 1/1.6 A thermal relay module 94MD1AM1 008 9 A - 24 VDC contactor module 94MD1AM1 009 Reversing contactor module 95MD1AM1 010 240 V Altistart soft starter module 95MD1AM1 011 Contactor relay module 96MD1AM1 012 Time-delay contactor relay module 96MD1AM1 013 25 A - 230 VAC contactor module 97MD1AM1 014 9/13 A thermal relay module 97MD1AM1 015 Thermal-magnetic protection module 98MD1AM1 016 ZIGBEE - ZBRRA module 98MD1AM1 017 ZIGBEE - ZBRRC module 99MD1AM1 018 380/415 V Altistart soft starter module 99MD1AM2 001 230 VAC single-phase protection module 61MD1AM2 002 Three-phase protection module 61MD1AM2 003 Power meter module - METSEPM3250 62MD1AM2 004 3 CT module 62MD1AM2 005 EGX300 gateway module 63MD1AM2 006 iRIO controller module 63MD1AM2 007 Modbus Slave interface module (SIM10M) 64MD1AM2 008 Zigbee Modbus interface module (SIM10Z) 64MD1AM2 009 EGX105Z gateway module 65MD1AM2 010 Wi-Fi router module 65MD1AM3 001 KNX bus 160 power supply module 09MD1AM3 002 System coupler module 09MD1AM3 003 KNX 4-output module 10MD1AM3 004 KNX 230 V 4-input module 10MD1AM3 005 Variable control actuator module 11MD1AM3 006 Programmable timer module 11MD1AM3 007 USB interface module 12MD1AM3 008 Roller shutter actuator module 12MD1AM3 009 Artec double pushbutton module 13

Reference Designation PageMD1AM3 010 Artec 8-key multifunction pushbutton module 13MD1AM3 011 Artec 4-key multifunction pushbutton module 14MD1AM3 012 Trancent pushbutton module 14MD1AM3 013 Movement sensor module 15MD1AM3 014 Presence sensor module 15MD1AM3 015 2 binary input module 16MD1AM3 017 4-button pushbutton module with thermostat 16MD1AM3 018 Presence and light sensor module 17MD1AM3 019 M-PLAN IR 8-key multifunction pushbutton module 17MD1AM3 020 KNX/DALI gateway module 18MD1AM3 021 EMO servo motor module 18MD1AM3 022 Weather station module with associated sensor 19MD1AM3 023 24 VAC/VDC power supply module 19MD1AM3 025 KNX bus 160 power supply module 20MD1AM3 026 8-button multifunction pushbutton module + IR 20MD1AM3 027 4-button multifunction pushbutton module 21MD1AM3 028 KNX bus 320 power supply module 21MD1AM3 029 4-button pushbutton module + time delay 22MD1AM3 030 PLC module 22MD1AM3 031 KNX/IP router module 23MD1AM3 032 24 VDC power supply module 23MD1AM3 033 HVAC actuator module 24MD1AM3 034 Servo motor module 24MD1AM3 035 8 LED module 25MD1AM3 037 Room temperature thermostat module 25MD1AM3 038 0 - 10 V actuator module 26MD1AM3 039 Intesys Box gateway module 26MD1AM3 040 10-inch screen module 27MD1AM3 041 Blind actuator module 27MD1AM3 042 0 - 10 V actuator module – three-way control 28MD1AM 3BA KNX discovery batch 32MD1AM 3EE KNX energy efficiency discovery batch 33MD1AM4 001 24 VDC - 2.5 A power supply module 31MD1AM4 002 24 VDC - 4.2 A power supply module 31MD1AM5 001 Altivar 312 module 100MD1AM5 002 Altivar 12 module 100MD1AM6 001 Circuit breaker panel module + tariff meter 35MD1AM6 002 1P + N 10 A circuit breaker module 35MD1AM6 003 1P + N 16 A circuit breaker module 36MD1AM6 004 1P + N 16 A residual current circuit breaker module 36MD1AM6 005 1P + N 20 A residual current circuit breaker module 37MD1AM6 006 Impulse relay module with integrated function 37MD1AM6 007 Impulse relay module with control 38MD1AM6 008 Programmable timer switch module 38MD1AM6 009 2 NO 25 A contactor module 39MD1AM6 010 MIN'clic 1 to 7 min timer module 39MD1AM6 011 Advance off warning module 40MD1AM6 012 IC200 light-sensitive switch module 40MD1AM6 013 CDS single-phase load shedder module, 1 channel 41MD1AM6 014 To-and-fro switch module 41MD1AM6 015 Pushbutton module 42MD1AM6 016 Illuminated pushbutton module 42MD1AM6 017 Double pushbutton module 43MD1AM6 018 2P + T 10/16 A socket module 43

Dead product



Reference Designation PageMD1AM6 019 Movement sensor module 44MD1AM6 020 Timer module with advance off warning 44MD1AM6 029 Room temperature sensor module 45MD1AM6 030 TH4 3-threshold thermostat module 45MD1AM6 121 Domestic discovery batch T1/T2 49MD1AM6 122 Domestic discovery batch T3/T4 49MD1AM6 123 Small services discovery batch 50MD1AM6 126 Residential and small services discovery batch 50MD1AM6 130 Residential and small services EE discovery batch 51MD1AM7 001 Variable speed drive control module 103MD1AM7 002 Machine control module 103MD1AM7 003 ZIGBEE control station module 119MD1AM7 004 Motor starter control module 119MD1AM9 001 Safety module for emergency stop monitoring 109MD1AM9 002 Safety module for emerg. stop + limit switch monitoring 109MD1AM9 003 Safety module for magnetic switch monitoring 110MD1AM9 004 Safety module for time delay monitoring 110MD1AM9 005 Safety module for zero speed monitoring 111MD1AM9 006 Safety module for time delay monitoring 111MD1AML DM Starter motor discovery batch 105MD1AML ZL Zelio PLC discovery batch 89MD1AML TW Twido PLC discovery batch 88MD1AML MR M340 PLC discovery batch 87MD1AML PR Premium PLC discovery batch 88MD1AML RFID RFID discovery batch 87MD1AML ATV12 Altivar 12 drive discovery batch 107MD1AML ATV312 Altivar 312 drive discovery batch 107MD1AML ATVEE Ventilation energy efficiency discovery batch 106MD1AML IRIO iRIO discovery batch 69MD1AML SECU Machine safety discovery batch 115MD1AML SOL Solar discovery batch 59MD1AMP 001 230/400 V asynchronous motor operational part 101MD1AMP 002 Motorised conveyor operational part 101MD1AMP 003 Traffic management operational part 82MD1AMP 004 15 W lamp bracket operational part 28MD1AMP 005 Automatic barrier operational part 82MD1AMP 006 Temperature control operational part 83MD1AMP 007 Electric shutter operational part 47MD1AMP 008 Process control operational part 84MD1AMP 009 50 W lamp bracket operational part 58MD1AMP 010 2 kW room heater operational part 29MD1AMP 011 Machine safety bench operational part 112MD1AMP 013 400/690 V asynchronous motor operational part 102MD1AMP 014 230/400 V motorised fan operational part 102MD1AMP 016 RFID operational part 85MD1AMP 017 Water meter operational part 66MD1AMP 018 PT100 temperature operational part 66MD1AMP 019 Analogue sensor operational part 84MD1AMP 021 DALI operational part 118MD1AMP 022 Lamp + dimmer switch operational part 118MD1AMP 024 2 m motorised conveyor operational part 85MD1AA CORDONSSafety leads batch 120MD1AA VOLETR Roller shutter operational part 30MD1AA STORE Venetian blind operational part 30

Reference Designation PageMD1AMS 001 Ammeter/voltmeter module 55MD1AMS 002 Shunt controller module 55MD1AMS 003 12 VDC battery module 56MD1AMS 004 230 VAC - 30 W inverter module 56MD1AMS 005 Solar panel module 57

Building management modules

Building managementmodules

KNX modular offer .....................................................................................................8

Control part modules ............................................................................................................................................................9

Operational part modules .................................................................................................................................................28

Auxiliary part modules ........................................................................................................................................................31

Discovery batches ...............................................................................................................................................................32

Residential and small services modular offer .................................................. 34

Control part modules ..........................................................................................................................................................35

Operational part modules ................................................................................................................................................ 46

Auxiliary part module ........................................................................................................................................................ 48

Discovery batches .............................................................................................................................................................. 49

Products comply with the provisions of European Directives

Compliance report available on request

All of our discovery batches are supplied with:• Printed copy of the technical data sheet and specification• A CD containing PDF versions of these documents and the PLC applications

Safety leads are sold separately, see additional modules and accessories section


KNX modular offerPackage presentation

The KNX modular offer allows you to explore the very latest in intelligent buil-ding solutions:

• Internationally recognised standard and certified system• Flexible and cost-effective

The proposed products allow functions such as the following to be achieved:• Control of roller shutters• Control and variation of lighting• Control and variation of temperature

All these elements are interlinked by the Konnex bus which meets the international ISO/IEC 14 543-3 standard. Functions are configured from a PC using ETS 4 Pro or Trainee software.

Actuator moduleMD1AM3 003

Switch module MD1AM3 017


Designation KNX bus 160 power supply module System coupler module KNX 4-output module KNX 230 V 4-input module Variable control actuator moduleProgrammable timer module USB interface moduleRoller shutter actuator moduleArtec double pushbutton module ARTEC 8-key multifunction pushbutton module with infraredARTEC 4-key multifunction pushbutton module TRANCENT pushbutton moduleMovement sensor modulePresence sensor module 2 binary input module 4-button pushbutton module with thermostat functionPresence and light sensor module M-PLAN 8-key multifunction pushbutton module with infraredKNX/DALI gateway module Servo motor module Weather station module with associated sensor 24 VAC/VDC power supply moduleKNX bus 160 power supply module 8-button pushbutton module with infrared4-button pushbutton moduleKNX bus 320 power supply module 4-button pushbutton module + time delayLogic module KNX/IP router module 24 VDC power supply module HVAC actuator module Servo motor module 8 LED module Room temperature thermostat module 0 - 10 V actuator module Intesys Box gateway module 10-inch screen moduleBlind actuator module0 - 10 V actuator module

The KNX modular offer comprises:

Educational objectives:

• To analyse the functionalities and the principles of a home automation installation

• To wire the components• To configure the system according to

various scenarios

Electrical and mechanical data• Power supply:230 V ~ single phase +T/200 VA• Dimensions (H x L x D) – weight:Structure: 1030 x 910 x 400 mm – 6.5 kgSingle module: 244 x 150 x 70 mm – 0.7 kg

Main sectors

• Electrical engineering• Industrial engineering and maintenance

Other sectors

• Industrial science and technology



KNX modules• KNX BUS 160 POWER SUPPLY MODULE

The module is connected to the 230 V supply downstream of an appropriate electrical protection device (230 VAC/10 A single-phase protection module, reference MD1AM2 001).

It supplies the power for operating the KNX bus.

• SYSTEM COUPLER MODULE

The system coupler module is used for the logical linking and galvanic separation of lines and domains. A changeover switch allows you to switch between "coupler" mode and "amplifier" mode.

In coupler mode the component is wired in parallel on the bus and creates a new line (or zone).

In amplifier mode, the bus enters the component for reformatting before exiting again.

Module comprises: • MTN680204 - System coupler/repeater

• Technical data:

o Maximum number of devices on bus: 32o Protection: Short-circuit proof

• 3 x 4-mm safety sockets labelled L, N and Earth available for power distribution to other modules.

Module comprises: • MTN683329 - 1-line 32P BUS power supply

KNX BUS 160 POWER SUPPLY MODULE

MD1AM3 001

Technical data

• Power supply: KNX bus

• Contents:

One pair of jumpers (red and blue)

SYSTEM COUPLER MODULE

MD1AM3 002

Technical data


• Contents:



• KNX 4-OUTPUT MODULE

The KNX 4-output module can be used for independent switching with the four outputs via NO or NC contact. All the outputs can be actuated manually using selector switches on the product's front panel. A green LED indicates the module's operating status.

• Examples of software functions:o Time delay for each channelo Timero Alerto Interlocko Sequences

• KNX 230 V 4-INPUT MODULE

The 4-input module can be used to connect conventional devices with 230 VAC outputs. The four inputs have a yellow LED status indicator. A green LED indicates the module's operating status.

• Examples of software functions:o Switch with short and long press and bounce-free contacto Dimmer or shutter controlo Edges triggering data packets (1 to 8 bits)o Sequenceso Interlocko NO/NC contact

Module comprises: • MTN644990 - 230 VAC 4 binary input module

o Information feedback per channelo Central functiono Parameter settings for loss/restoration

of bus connection

Module comprises: • MTN647593 - KNX 4-output module

KNX 4-OUTPUT MODULE

MD1AM3 003

Technical data • Power supply: KNX bus

Rated voltage: 230 VACRated current: 16 A (cos = 0.6)Rated power:230 VAC incandescent lamps: 3600 W230 VAC halogen lamps: 2500 W230 VAC fluorescent lamps: 2500 W

• Contents:


KNX 230 V 4-INPUT MODULE

MD1AM3 004


Input voltage: 230 VACTouch current: 12 mALow set-point: i 40 VHigh set-point: 160 V

• Contents:




• VARIABLE CONTROL ACTUATOR MODULE

The variable control actuator module can be used to switch and vary the current of an output. The output can be actuated manually using the pushbutton on the product's front panel.A green LED indicates the module's operating status. Two LEDs (yellow and red) indicate the channel status and a fault on the channel respectively.

• Examples of software functions:o Switch ON responseo Memory functiono Range of dimming speeds and curveso Switch OFF via relative dimmingo Minimum light levelo Parameter settings for loss/restoration of

bus connection

Module comprises: • MTN649350 - Variable control actuator

• PROGRAMMABLE TIMER MODULE

The programmable timer module comprises a programmable annual quartz clock with four channels. The clock can either be programmed manually on the device or on a PC using Obelisk software (option).

• Technical data:o 324 continuous switching schedules for operations on a daily or

weekly basis or on a specified date, pulse control.o 1 operation for public holidayso 10 weekly programs per channel for public holidayso Optional training of channel blocks + days of the weeko Manual operation possible via operation preset and continuous

switchingo Random programo Control without network connection

o Large program memory backupo Automatic daylight saving time

management• Examples of software functions:o Switcho Variable controlo Date and time transmission• Technical data:o Operational accuracy: < + 1 s/dayo Program memory backup: 1.5 years

Module comprises: • MTN677129 - 4-channel programmable clock

VARIABLE CONTROL ACTUATOR

MD1AM3 005


Rated voltage: 230 VACRated power: 500 W/VAMinimum rated power:Resistive loads: > 30 WCapacitive loads: > 50 VA

• Contents:


PROGRAMMABLE TIMER MODULE

MD1AM3 006

Technical data


• Contents:



• USB INTERFACE MODULE

The module comprises a USB/KNX interface for programming or diagnostics. A computer running ETS4 software is connected to the USB module by means of the USB cable supplied.

• Technical data:o Compatibility: USB 1.1 or USB 2

• ROLLER SHUTTER ACTUATOR MODULE

The roller shutter actuator module can be used for independent switching of two drives for roller blinds or shutters.Manual operation is selected by means of a "Hand" pushbutton and a red LED indicator. In this mode all outputs can be actuated manually by means of pushbuttons. Yellow LEDs indicate the status of each channel. A green LED indicates the module's operating status.

• Examples of software functions:o Choice of blind typeo Operating time/dwell timeo Interlocko Weather alarmo Sequenceso Information feedback

Module comprises: • MTN649802 - 230 VAC roller shutter actuator

Module comprises: • MTN681829 - USB interface module

USB INTERFACE MODULE

MD1AM3 007

Technical data


• Contents:

One USB 1.1/2.0 cableOne pair of jumpers (red and blue)

SHUTTER ACTUATOR MODULE

MD1AM3 008


Input voltage: 230 VACTouch current: 10 A(cos = 0.6)Motor load: 230 VAC, max. 1000F

• Contents:




• ARTEC DOUBLE PUSHBUTTON MODULE

The module comprises a double pushbutton (4 keys with appropriate printing for control of roller shutters). The micro-switch and programming LED can be accessed by unclipping the product.

• Examples of software functions:o Keys can be configured as pairs (up to

start, down to stop) or as individual keys.o ON switchingo OFF switchingo Variable controlo Sequenceso Blind control (paired configuration)

Module comprises: • MTN626299 - ARTEC double pushbutton control• MTN626760 - ARTEC aluminium double control• MTN481160 - ARTEC aluminium finishing plate

• ARTEC MULTIFUNCTION PUSHBUTTON MODULE 8 KEYS AND IR RECEIVER

The module comprises a quadruple pushbutton (8 keys) and an infrared receiver for remote control (reference MTN 570222). The lower central part of the front panel can be configured as an additional command key.User-definable keys:o Paired: One key to start, another to stopo Single: Start and stop on a single keyBlue operating and status indicator light for each key.The micro-switch and programming LED can be accessed by unclipping the product.

• Examples of software functions:o Switch with short and long press and

bounce-free contacto Selector switcho Variable control (paired or single)o Blind control (paired or single)o Edges triggering data packets (1 to 8 bits)o Edges with 2-byte data packetso 8-bit sliding controllero Sequence storage and recallo Interlock

Module comprises: • MTN628460 - Artec 8-key multifunction pushbutton• MTN481160 - Artec finishing plate - white

ARTEC DOUBLE PUSHBUTTON MODULE

MD1AM3 009

Technical data


• Contents:


MULTIFUNCTION PUSHBUTTON

MD1AM3 010

Technical data


• Contents:



• ARTEC 4-KEY MULTIFUNCTION PUSHBUTTON MODULE

The lower central part of the front panel can be configured as an additional command key.User-definable keys:o Paired: One key to start, another to stopo Single: Start and stop on a single keyBlue operating and status indicator light for each key.The micro-switch and programming LED can be accessed by unclipping the product.


bounce-free contacto Selector switcho Variable control (paired or single)o Blind control (paired or single)o Edges triggering data packets (1 to 8 bits)o Edges with 2-byte data packetso 8-bit sliding controllero Interlock

• TRANCENT PUSHBUTTON MODULE

The module comprises a touch-sensitive pushbutton fitted with a glass fi-nishing plate.The control electronics can be programmed as a single, double or quadruple touch control (1 to 4 touch-sensitive zones). An LED indicator helps to locate the pushbutton in the dark. An audible signal is emitted when a touch control is activated.

User-definable keys:o Paired: One key to start, another to stopo Single: Start and stop on a single key

The micro-switch and programming LED can be accessed by unclipping the product.


bounce-free contacto Selector switcho Variable control (paired or single)o Blind control (paired or single)o Edges triggering data packetso Edges with 2-byte data packetso 8-bit sliding controllero Interlock

Module comprises: • MTN6164600 - Trancent single command• MTN569100 - Trancent glass finishing plate• MTN482160 - Trancent single-station aluminium

frame

Module comprises: • MTN628160 - ARTEC 4-key multifunction pushbutton• MTN481160 - ARTEC finishing plate - white


MD1AM3 011

Technical data


• Contents:


TRANCENT PUSHBUTTON MODULE

MD1AM3 012

Technical data


• Contents:


S



• ARGUS MOVEMENT SENSOR MODULE (corridor)

The module comprises an interior movement sensor with light sensor. When a movement is detected, a data telegram defined at the programming stage is sent.The micro-switch and programming LED can be accessed by unclipping the product.• Settings via potentiometers on the back of the sensor:o Operation timer period from 1 s to 8 mino Light threshold (light-sensitive switch)• Examples of software functions:o Time delayo Operation timer (stairwell)o Up to 4 functions triggered on detectiono Information feedback

• Technical data:o Detection angle: 180°o Sensing distance: 8 mo Light sensor: Continuously adjustable

from 5 to 1000 lux approx.

Module comprises: • MTN632660 - Aluminium movement sensor• MTN486160 - M-PLAN aluminium finishing

plate

• ARGUS PRESENCE SENSOR MODULE WITH INFRARED RECEIVER (ceiling)

The module comprises an interior movement sensor with infrared receiver for remote control (ref. MTN570222). An integrated light sensor allows the light level to be controlled according to whether there is someone present. When a movement is detected, a data telegram defined at the programming stage is sent. The micro-switch and programming LED can be accessed by unclipping the product.

• Examples of software functions:o Light threshold adjustmento Up to 3 functions triggered on

detectiono Information feedback• Technical data:o Detection angle: 360°o Sensing distance: 10 to 17 mo Light sensor: Continuously adjustable

from 10 to 1000 lux approx.

Module comprises: • MTN630919 - Exterior presence sensor + IR

MOVEMENT SENSOR MODULE

MD1AM3 013

Technical data


• Contents:


PRESENCE SENSOR MODULE

MD1AM3 014

Technical data


• Contents:



• 2 BINARY INPUT MODULE

The module comprises an interface which generates an internal signal voltage for the connection of conventional pushbuttons or potential-free contacts.

Two switches are wired for local simulation. The two inputs have a yellow LED status indicator.


bounce-free contacto Dimmer or shutter controlo Edges triggering data packets (1 to

8 bits)o Sequenceso Countero Interlocko NO/NC contact

Module comprises: • MTN670802 - 2 binary input module

2 BINARY INPUT MODULE

MD1AM3 015


Touch voltage: < 3 V (SELV) for each input/outputTouch current: < 0.5 mAOutput current: 2 mA max.

• Contents:


• 4-BUTTON PUSHBUTTON MODULE WITH THERMOSTAT

The module comprises 4 command keys with a display screen and thermostat, an operation indicator which also acts as a night light, and a piezo buzzer as an alarm signal. The thermostat can be used for heating or air-conditioning by means of KNX continuously adjustable servo motors or for the on-off control of switching or heating actuators. Controller type: 2-point control, continuous PI adjustment, switched PI adjustment (PWM).The white display screen can show the time, date, temperature and operating mode, for example.

• Examples of software functions:o Switch with short and long press and bounce-free

contacto Selector switcho Variable control (paired or single)o Blind control (paired or single)o Time delayo Alarmo 8-bit sliding controllero Interlocko Cyclical reading of outside temperature

Module comprises: • MTN486160 - M-PLAN aluminium finishing plate • MTN6212-0460 - M-Plan multifunction pushbutton

User-definable keys:o Paired: One key to start, another to stopo Single: Start and stop on a single key

The micro-switch and programming LED can be accessed by unclipping the product.

4-BUTTON PUSHBUTTON MODULE

MD1AM3 017

Technical data


• Contents:




• PRESENCE AND LIGHT SENSOR MODULE

The module comprises an interior movement sensor with infrared receiver for remote control (ref. MTN570222).When a movement is detected, a data telegram defined at the programming stage is sent.When the device is operating in light sensor mode (for lighting control), it continuously checks the light level in the room and stops the artificial lighting actuator when the natural light is adequate, even if there is someone in the room.A light sensor allows the light level to be controlled according to whether there is someone in the room.The micro-switch and programming LED can be accessed by unclipping the product.

• Examples of software functions:o Light threshold adjustmento Up to 3 functions triggered on

detectiono Information feedback• Technical data:o Detection angle: 360°o Sensing distance: 10 to 17 mo Light sensor: continuously adjustableo From 10 to 1000 lux approx.

Module comprises: • MTN630592 - Presence and light sensor

PRESENCE SENSOR MODULE

MD1AM3 018

Technical data


• Contents:


• M-PLAN 8-KEY MULTIFUNCTION PUSHBUTTON MODULE WITH INFRARED RECEIVER

The module comprises a quadruple pushbutton (8 keys) and an infrared receiver for remote control (MTN570222).The lower central part of the front panel can be configured as an additional command key.The keys can be configured as pairs (one key to start and another to stop) or singly (start and stop on one key). Blue operating and status indicator light for each key. The micro-switch and programming LED can be accessed by unclipping the product.

• Examples of software functions:o Switch with short and long presso Selector switcho Variable control (paired or single)o Blind control (paired or single)o Edges triggering data packetso Edges with 2-byte data packetso 8-bit sliding controllero Sequence storage and recallo Interlock

Module comprises: • MTN627944 - M-PLAN multifunction pushbutton

with IR


MD1AM3 019

Technical data


• Contents:



• KNX/DALI GATEWAY MODULE

The module comprises the DALI gateway for connecting digital stabilisers fitted with a DALI interface to KNX.This gateway acts as the DALI master and supplies voltage to the stabilisers.It can be used to switch and vary up to 64 stabilisers in 16 groups and to control 16 lighting sequences.Light values and error messages from the DALI devices can be viewed on display units.DALI can be commissioned and configured by means of the integrated display and command keys. Two discrete inputs are available for the direct connection of pushbuttons.

Module comprises: • MTN680129 - DALI gateway

KNX/DALI GATEWAY MODULE

MD1AM3 020


Supply voltage: 110- 240 VACInputs: 2 passive inputs 9 - 36 VDC or 9 - 24 VACOutputs: DALI D+/D- (16 - 18 VDC 150 mA)

• Contents:


• EMO SERVO MOTOR MODULE

The module comprises a proportional electric servo motor with integrated bus coupler, microprocessor control with automatic valve stroke detection, and two integrated binary inputs ("open window" sensor).

Module comprises: • MTN639118 - Servo motor• MTN639190 - Programming magnet• MTN639178 - VA78 valve adapter

• Examples of software functions:o Reference positiono Effective positiono Status messageo Overrideo Threshold value• Travelo 1.0 mm min.o 4.5 mm max.o Operating time 25 s/mm

EMO SERVO MOTOR MODULE

MD1AM3 021

Technical data


• Contents:




• WEATHER STATION MODULE WITH ASSOCIATED SENSOR

The module comprises a weather station which detects and processes analogue signals from the sensor, including wind speed, light, twilight, precipitation and a DCF77 signal. The configuration software offers default thresholds, which can be accessed with the combined weather sensor/DCF77. The measured values are converted into 1 or 2-byte data packets, which can be viewed by means of display devices and used in command or control processes.

• Examples of software functions:o Two threshold values per sensor o Connection of multiple anemometerso 14 analysable signalso Analysis of DCF77 time signal o Astronomical functiono Signal monitoringo Alarm byte

• Optional sensors:o Combined weather sensoro Heated anemometero Rain sensoro Heat sensoro Light sensoro Twilight sensoro DCF77 antennaModule comprises: • MTN682991 - Weather station• MTN663591 - Anemometer with 0-10 V interface

WEATHER STATION MODULE

MD1AM3 022


Rated voltage: 230 VACAnalogue inputs: 4 (0-20 mA, 4-20 mA, 0 - 1 V, 0 - 10 V)

• Contents:


• 24 VAC/VDC POWER SUPPLY MODULE


It supplies the power for operating the weather station reference MD1AM3 022.

Module comprises: • ABL7RM24025 - Modular power supply

24 VAC/VDC POWER SUPPLY MODULE

MD1AM3 023

Technical data


Rated voltage: 230 VAC

• Contents:



• KNX BUS 160 POWER SUPPLY MODULE



Module comprises: • MTN684016 - KNX bus 160 mA power supply

• ARTEC 8-KEY MULTIFUNCTION PUSHBUTTON MODULE WITH INFRARED RECEIVER



bounce-free contacto Selector switcho Variable control (paired or single)o Blind control (paired or single)o Edges triggering data packets (1 to

8 bits)o Edges with 2-byte data packetso 8-bit sliding controllero Interlock

Module comprises: • MTN627660 - Multifunction control with IR receiver• MTN486160 - ARTEC steel finishing plate

• Technical data:o Maximum number of devices on bus: 32o Protection: Short-circuit proof• 3 x 4-mm safety sockets labelled L, N and

Earth available for power distribution to other modules.

8-BUTTON PUSHBUTTON MODULE + IR

MD1AM3 026

Technical data


• Contents:


KNX BUS POWER SUPPLY MODULE

MD1AM3 025


Line voltage: 230 VACOutput voltage: 29 VDC +/- 1 VOutput current: 160 mA max.

• Contents:




• KNX BUS 320 POWER SUPPLY MODULE

The module is connected to the 230 V supply downstream of an appropriate electrical protection device (230 VAC/10A single-phase protection module, reference MD1AM2 001).


• Technical data:o Maximum number of devices on bus: 64o Protection: Short-circuit proof• 3 x 4-mm safety sockets labelled L, N and

Earth available for power distribution to other modules.

Module comprises: • MTN684032 - KNX power supply

KNX BUS 320 POWER SUPPLY MODULE

MD1AM3 028


Line voltage: 230 VACOutput voltage: 29 VDC +/- 1 VOutput current: 320 mA max.

• Contents:


• M-PLAN 4-BUTTON MULTIFUNCTION PUSHBUTTON MODULE



bounce-free contacto Selector switcho Variable control (paired or single)o Blind control (paired or single)o Edges triggering data packets (1 to 8 bits)o Edges with 2-byte data packetso 8-bit sliding controllero Interlock

Module comprises: • MTN627660 - 4 M-Plan multifunction pushbuttons• MTN486160 - ARTEC aluminium finishing plate


MD1AM3 027

Technical data


• Contents:



• 4-BUTTON PUSHBUTTON MODULE + TIME DELAY

The module comprises 4 command keys with a display screen and thermostat, an operation indicator which also acts as a night light, and a piezo buzzer as an alarm signal. The thermostat can be used for heating or air-conditioning by means of KNX continuously adjustable servo motors or for the on-off control of switching or heating actuators.Controller type: 2-point control, continuous PI adjustment, switched PI adjustment (PWM).The white display screen can show the time, date, temperature and operating mode, for example.User-definable keys:o Paired: One key to start, another to stopo Single: Start and stop on a single keyThe micro-switch and programming LED can be accessed by unclipping the product.

Module comprises: • MTN6212-4146 - Multifunction control• MTN481146 - ARTEC single finishing plate

• PLC MODULE

The PLC module is used for performing logical operations and advanced control functions on KNX objects. It comprises 10 logic modules, 10 filters/timers, 8 converters, 12 multiplexers, 3 programmable pushbuttons and 3 status feedback LEDs on the front panel. Control functions can be assigned to the pushbuttons and LEDs for test purposes or for operation.KNX functions:• 10 logic modules (AND, OR, EXCLUSIVE OR)• 10 filters/timers• 8 converters

Module comprises: • MTN676090 - KNX Basic PLC module


bounce-free contacto Selector switcho Variable control (paired or single)o Blind control (paired or single)o Time delayo Alarmo 8-bit sliding controllero Interlocko Cyclical reading of outside temperature

• 12 multiplexers: used for the selective transmission of telegrams. Useful for a lighting control for a room that can be divided into two by means of a partition

• Programming LEDs and push-buttons on front panel

• Response after bus voltage return


MD1AM3 029

Technical data


• Contents:


PLC MODULE

MD1AM3 030

Technical data


• Contents:




• KNX/IP ROUTER MODULE

The module can be used to connect a programming or diagnostic device to KNX via an Ethernet network. There is an RJ45 connector available on the component.

The IP address can be assigned dynamically via a DHCP server or by manual configuration (ETS parameters).Additional function: system coupler.

• 24 VDC POWER SUPPLY MODULE

The module includes a 0.4 A, 24 VDC power supply for the IP router (reference: MD1AM3 031).

Short-circuit and overload protection.

Module comprises: • MTN693003 - REG power supply, 24 V

Module comprises: • MTN680329 - IP/KNX router

KNX/IP ROUTER MODULE

MD1AM3 031


Input voltage: 20 to 30 VDC(For 24 V 40 mA DC), 12 to 24 VAC

• Contents:


24 VDC POWER SUPPLY MODULE

MD1AM3 032


Line voltage: 230 VACOutput voltage: 24 VDC +/- 3%Output current: 0.4 A

• Contents:



• HVAC ACTUATOR MODULE

The module comprises an actuator for controlling heating, ventilation and air-conditioning. The actuator can be used to control three-speed fan coil units and three-point motor drives (continuous/pulse width modulation) or two-point thermal drives. The actuator supports 2-tube and 4-tube systems. Two binary inputs, for the window contact and fill level contact, for example, for the condensate recovery tank.• Controller type: PI control (PWM and continuous)• Controller mode: heating and/or air conditioning with shared or separate valves• Operating modes: operating mode selected by means of the multifunction pushbutton with thermostat

Module comprises: • MTN645094 - KNX REG-K fan coil actuator

• SERVO MOTOR MODULE

The module comprises a thermostatic controller for opening and closing valves. For 2-point or PWM control of heating, air-conditioning and ventilation devices, room-by-room control of surface heating systems, control of heating circuit distributors, radiators, convection heaters, ceiling-mounted air-conditioning units.• First-open function: the drive is open on delivery (NO). This

allows the heating to be used even in the construction phase• Normally closed (NC)• Function display (opening, closing, intermediate steps)

Module comprises: • MTN639125 - Thermoelectric servo motor

Outputs: • 3 potential-free contacts (fan)• 2 selector switches for valves

• Normally closed (NC)• Function display (opening, closing,

intermediate steps)• Adaptor control• Locking mechanism

HVAC ACTUATOR MODULE

MD1AM3 033


Rated voltage: 230 VACSwitching power for 0.5 A valves 24 - 230 VAC

• Contents:


SERVO MOTOR MODULE

MD1AM3 034

Technical data


• Contents:




• 8 LED MODULE

The module comprises 8 green LEDs, each with two black converter sockets.

• ROOM TEMPERATURE THERMOSTAT MODULE

The module comprises a KNX room temperature thermostat with display screen and 4 buttons. This thermostat can be used for heating and air-conditioning by means of proportional KNX EMO servo motors or for controlling switching or heating actuators.• Controller type: 2-point control, continuous PI adjustment, switched

PI adjustment (PWM)• Output: continuous from 0 to 100% (1 byte) or on M/A switching• Controller mode:o heating/air-conditioning/heating and air-conditioning o 2-level heatingo 2-level air-conditioningo 2-level heating and air-conditioning

• Operating modes: comfort, extended comfort, standby, night temperature reduction, frost-free/heat stress protection

• All setpoint temperatures and operating mode saved on reset

• Actual temperature adjustment and valve opening protection

Module comprises: • ALB45154 - Temperature regulator• ALB45601 - Single-station bracket• ALB45650 - Single-function white plate

Module comprises: • ZB6DV3 - Green rectangular LED head• 2B6M3B - Complete body for green LED

8 LED MODULE

MD1AM3 035

Technical data



ROOM TEMPERATURE THERMOSTAT

MD1AM3 037

Technical data


• Contents:



• 0 - 10 V ACTUATOR MODULE

The module comprises an interface between the KNX bus and stabilisers/transformers controlled by 0 - 10 V.

KNX software functions • Range of dimming speeds and curves• Identical dimming time• Memory function• On/off time delay• Stairwell timer with/without manual stop function• Lighting environments (selection of up to 8 recorded light values)• Central function• Logical operators or forcibly guided

• Interlock• Status feedback message• Response to bus voltage restoration

• INTESYS BOX GATEWAY MODULE

The module comprises a server-type KNX/ModBus interface.

Up to 100 group addresses can be defined.ModBus 03 and 04 functions are used in read mode.ModBus 06 and 16 functions are used in write mode.

INTESYS BOX GATEWAY MODULE

MD1AM3 039

Technical data


• Contents:


0 - 10 V ACTUATOR MODULE

MD1AM3 038


Rated voltage: 230 VACSwitching current: 16 A (cos = 0.6)

• Contents:




• BLIND ACTUATOR MODULE

The function of blind channels can be configured freely. All blind outputs can be actuated manually by means of keys on the actuator's front panel.A green LED indicates the operating status.

o KNX software functions: • Slat management• Operating time• Dwell time• Duration of each step• Differentiated interlock functions• Weather alarms• 8-bit positioning for height and slats• Sequences• Manual/automatic function• Differentiated information and status

feedback functions

• 10-INCH SCREEN MODULE

The module comprises a KNX 10-inch touch screen. It is used for viewing and controlling building functions. Graphical user interface simulation in ETS and the dynamic plug-in make developing an intuitive user interface quick and easy.o Operating system used: Windows CE.NETo Additional functions• Time programmer with synchronisation via KNX or Internet• Presence simulation (sequence storage and recall)• Alarm management• Web browser• Automatic standby mode: freeze frame

• Photo slide show or screen power down

• Password protection• User-configurable interface with

LAN connection (10/100 Mbps), KNX connection and USB port;

Built-in speaker

Module comprises: • ALB08530 - RJ45 cable / RJ45 male l = 0.3 m • MTN683090 - IP 10" colour touch screen

Module comprises: • MTN648704 - Switching actuator• ABL8MEM24012 - 24 VDC module power supply

10-INCH SCREEN MODULE

MD1AM3 040



• RJ45 Ethernet port

• Contents:


BLIND ACTUATOR MODULE

MD1AM3 041

Technical data


• Contents:



Operational parts

15 W LAMP BRACKET MODULE

MD1AMP 004

Technical data

• Power supply:


• 15 W & 50 W LAMP BRACKET MODULES

The operational part comprises a 15 W incandescent lamp. It is designed to be used as a load on KNX modules, for example.

It comprises:

o A clear window for checking that the lamp is workingo Two black converter sockets for the 230 VAC power supply to the lamp

They are available in two versions:

• 15 W lamp bracket operational part module

MD1AMP 004• 50 W lamp bracket operational part

module MD1AMP 009

• 0-10 V ACTUATOR MODULE

The module comprises an interface between the KNX bus and stabilisers/transformers controlled by 0 - 10 V.

KNX software functions • Range of dimming speeds and curves• Identical dimming time• Memory function• On/off time delay• Stairwell timer with/without manual stop function• Lighting environments (selection of up to 8 recorded light values)• Central function• Logical operators or forcibly guided

• Interlock• Status feedback message• Response to bus voltage restoration

Module comprises: • ALB08530 - Three-way control unit

0-10 V ACTUATOR MODULE

MD1AM3 042


Rated voltage: 230 VACSwitching current: 16 A (cos = 0.6)

• Contents:



• ELECTRIC SHUTTER MODULE

The operational part represents a motorised electric shutter. The electric shutter is controlled by two commands – "raise" and "lower". Automatic stop is available in the top position, shutter open, and bottom position, shutter closed.The control operates at 230 VAC.

The module comprises:

o A motorised shutter mechanical system

o One LED simulating a lamp inside the homeo Two black 4-mm converter sockets for

the "raise" commando One yellow LED indicating that the

"raise" command has been issuedo Two black 4-mm converter sockets for

the "lower" command

ELECTRIC SHUTTER MODULE

MD1AMP 007

Technical data

• Power supply:


• 2 KW ROOM HEATER MODULE

The operational part comprises an electric radiator and 4-mm safety sockets for easy connection to the various control modules.


ROOM HEATER MODULE

MD1AMP 010

Technical data

• Power supply:

Rated voltage: 230 VACPower: 2000 W


• 230/400 V ROLLER SHUTTER MODULE

The module comprises a standard roller shutter which is raised and lowered by means of 4-mm safety sockets.

Height: 600 mmWidth: 550 mm

• VENETIAN BLIND MODULE

The module comprises a venetian blind with multiposition slats. The blind is controlled by an electric motor, which raises or lowers it, and by means of a rod for changing the position of the slats. The self-locking brake can stop the blind at any height.

ROLLER SHUTTER MODULE

MD1AA VOLETR

Technical data

• Power supply:


VENETIAN BLIND MODULE

MD1AA STORE

Technical data

• Power supply:

Rated voltage: 24 VDC



Auxiliary parts• 24 VDC POWER SUPPLY MODULE

The modules are voltage converters; they can be used to deliver a 24 VDC power supply to the various modules.


• 24 VDC - 2.5 A power supply module MD1AM4 001• 24 VDC - 4.2 A power supply module MD1AM4 002

• 230 VAC POWER SUPPLY MODULE

The module comprises a 10 A 30 mA earth leakage circuit breaker fitted with an undervoltage trip coil.

A power socket for connecting the power cord supplied

A white "power on" LED indicates the module status

An emergency stop button cuts off the power supply instantaneously.

These are single-format modules. They comprise:

o One red converter socket labelled 24 V for the power supply

o One blue converter socket labelled 0 Vo One European-type socket for the line

power supplyo One green LED labelled ON to indicate

Set of three safety sockets (black, blue and yellow/green) for easy connection to other modules


MD1AM4 001

Technical data • Power supply:


• Contents:

Power cableOne pair of jumpers (red and blue)

230 VAC POWER SUPPLY MODULE

MD1AM2 001



• Contents:

Power cableOne pair of black jumpers


Discovery batchesThe KNX batch, reference MD1AM 3BA, comprises:

Quantity Designation Reference1 Bus power supply module MD1AM3 001

1 System coupler module MD1AM3 002

1 Switching actuator module with 4 outputs MD1AM3 003

1 230V 4 binary input module MD1AM3 004

1 Variable control actuator module MD1AM3 005

1 Programmable timer module MD1AM3 006

1 USB interface module MD1AM3 007

1 + USB2 programming cable

1 Roller shutter actuator module MD1AM3 008

1 Artec double command module for white roller shutter MD1AM3 009

1 Artec 8-key multifunctional module with IR + finishing plate MD1AM3 010

1 Artec 4-key multifunctional module + finishing plate MD1AM3 011

1 4-Button pushbutton module with thermostat MD1AM3 017

1 Complete movement detector module + finishing plate MD1AM3 013

1 Interior presence detector module MD1AM3 014

1 2 binary input module MD1AM3 015

1 Remote control MTN570222

1 Single-phase protection module MD1AM2 001

2 15 W lamp bracket modules MD1AMP 004

1 Electric shutter operational part module MD1AMP 007

1 Supporting structure MD1AM 000

1 ETS4 Pro licence dongle

5 ETS4 Trainee licence dongles

Technical data sheet MD1ADM3 KNTNT

Technical and educational manual MD1ADM3 KNXTP

+ CD-ROM



The KNX Energy efficiency batch, reference MD1AM 3EE, comprises:

Quantity Designation Reference1 Bus power supply module MD1AM3 001

1 Switching actuator module with 4 outputs MD1AM3 003

1 230 V 4 binary input module MD1AM3 004

1 Variable control actuator module MD1AM3 005

1 Programmable timer module MD1AM3 006

1 USB interface module MD1AM3 007

1 + USB2 programming cable

1 Artec 8-key multifunctional module with IR + finishing plate MD1AM3 010

1 Artec 4-key multifunctional module + finishing plate MD1AM3 011

1 Complete movement detector module + finishing plate MD1AM3 013

1 Interior presence detector module MD1AM3 014

1 KNX/DALI gateway module MD1AM3 020

1 Weather station module with associated sensor MD1AM3 022

1 24 VDC/24 VAC power supply module MD1AM3 023

1 TCP/IP interface module MD1AM3 031

1 Single-phase protection module MD1AM2 001

1 DALI operational part module MD1AMP 021



1 ETS4 Pro licence dongle

5 ETS4 Trainee licence dongles

Technical data sheet MD1ADM3 KNTNT

Technical and educational manual MD1ADM3 KNXTP

+ CD-ROM

Residential and small servicesmodular offer

Package presentation

The residential and small services modular offer allows you to study and install the components of an electrical installation for the home and the small services sector.It consists of four educational batches designed to help you discover, learn and use the main functions encountered when implementing electrical installations in homes and in the small services sector.

These batches are of increasing complexity and complement one another:

• The first batch allows you to create the functions encountered in a home of type T1/T2

• The second batch, made up of products that complement the first batch, installs functions encountered in a home of type T3/T4

• The third batch, again made up of products that complement the first two batches, covers the main functions encountered in a building in the small services sector.

• The fourth batch, referred to as the energy efficiency batch, covers all the economic and energy management aspects through the use of products such as programmers, light-sensitive switches, timers and timer switches.

The residential and small services modular offer comprises:

Circuit breaker panel moduleMD1AM6 001

Pushbutton + LED moduleMD1AM6 016


Designation DB90 circuit breaker panel module with tariff meter1P + N 10 A circuit breaker module1P + N 16 A circuit breaker module1P + N 16 A residual current circuit breaker module1P + N 20 A residual current circuit breaker module16 A impulse relay module with integrated functionImpulse relay module with central control auxiliaryProgrammable timer switch module2 NO 25 A modular contactor moduleMIN'clic 1 to 7 min timer moduleAdvance off warning moduleLight-sensitive switch module with IC200 sensorCDS single-phase load shedder module, 1 channel To-and-fro switch modulePushbutton moduleIlluminated pushbutton moduleDouble pushbutton module2P + T 10/16 A socket moduleMovement sensor moduleTimer module with advance off warningRoom temperature sensor moduleTH4 3-threshold thermostat module


• To learn about and carry out component wiring• To optimise energy consumption through

the use of appropriate products• Installation maintenance

Electrical and mechanical data• Power supply:230 V - 50 Hz / < 15 A• Dimensions (H x L x D) – weight:Structure: 1030 x 910 x 400 mm – 6.5 kgSingle module: 244 x 150 x 70 mm – 0.7 kg

Main sectors

• Electrical engineering• Civil engineering

Other sectors

• All energy industries



10 A CIRCUIT BREAKER MODULE

MD1AM6 002

Technical data

• Power supply:


Residential and small services modules• CIRCUIT BREAKER PANEL MODULE WITH TARIFF METER

The circuit breaker panel module comprises:

• Incoming circuit breaker DB 90 with "selective residual current device"It is used at the head of the subscriber installation. Its rating can be set to 15/20/45 A. For operations it should be set to 15 A. The sensitivity of the residual current device (500 mA) protects users against indirect contact and installations against insulation faults.

• Tariff meterThis is used for counting electricity consumption. It differentiates between the various EDF tariffs (peak/off-peak periods, special tariffs, Tempo, etc. . .).

It must be set to a rating of 15 A.Do not close the incoming circuit breaker until all the connections of the selected functions have been completed.

• 1P + N 10 A CIRCUIT BREAKER MODULE

The module controls the circuits and overload and short-circuit protection for the line and for the downstream receivers.

Module comprises: • 20725 - D’clic 1P + N 10 A circuit breaker

Module comprises: • 13120 - Two-pole circuit breaker DB90• CR13MM11 - Energy meter

CIRCUIT BREAKER PANEL MODULE

MD1AM6 001

Technical data

• Power supply:



• 1P + N 16 A CIRCUIT BREAKER MODULE


• 1P + N 16 A RESIDUAL CURRENT CIRCUIT BREAKER MODULE


It also protects:

• Users against indirect or direct contact > = 30 mA• Electrical installations against insulation faults

It trips instantaneously and provides total vertical discrimination in conjunction with an incoming circuit breaker with a selective residual current device.

Module comprises: • 20553 - 1P + N 16 A earth leakage circuit breaker

Module comprises: • 20726 - D’clic 1P + N 16 A circuit breaker

16 A CIRCUIT BREAKER MODULE

MD1AM6 003

Technical data

• Power supply:


RESIDUAL CURRENT CIRCUIT BREAKER

MD1AM6 004

Technical data

• Power supply:




• 1P + N 20 A RESIDUAL CURRENT CIRCUIT BREAKER MODULE

The module controls the circuits and overload and short-circuit protection for the line and for the downstream receivers.It also protects:

• Users against indirect or direct contact > = 30 mA• Electrical installations against insulation faults

It trips instantaneously and provides total vertical discrimination in conjunction with an incoming circuit breaker with a selective residual current device.

Module comprises: • 20554 - N 20 A earth leakage circuit breaker

Module comprises: • 15518 - 16 A impulse relay with integrated

function

• IMPULSE RELAY MODULE WITH INTEGRATED FUNCTION 16 A

The module enables a group of impulse relays to be controlled centrally whilst also allowing local pulse control.

Central control refers here to the setting of a group of impulse relays to 0 or 1 by means of two pushbuttons.

RESIDUAL CURRENT CIRCUIT BREAKER

MD1AM6 005

Technical data

• Power supply:


IMPULSE RELAY MODULE

MD1AM6 006

Technical data

• Power supply:



• IMPULSE RELAY MODULE WITH CENTRAL CONTROL AUXILIARY

Each pulse from a pushbutton reverses the operating state of the impulse relay, causing its contact to open or close.The central control auxiliary is positioned to the right of an impulse relay and secured by means of latches. It provides central control of the impulse relay whilst also allowing local control of each impulse relay.

• PROGRAMMABLE TIMER SWITCH MODULE

The programmable timer module (IHP) controls the opening or closing of one or more independent circuits on the basis of a program set by the user and stored in the memory. It can control circuits for lighting, heating, signage, access control, etc. . .

Block programming for repetitive weekly switching operations, daylight saving option, memory space for 56 programs, holiday setting, override, etc. . .

Module comprises: • CCT16652 - Programmable timer switch

Module comprises: • 15409 - Central control and signalling• 15510 - 16 A - 230 VAC single-pole impulse relay

IMPULSE RELAY MODULE + CONTROL

MD1AM6 007

Technical data

• Power supply:


TIMER SWITCH MODULE

MD1AM6 008

Technical data

• Power supply:




• 2 NO 25 A CONTACTOR MODULE

Driven by the "off-peak" contact of the tariff meter, by a programmable timer, a load shedder, it controls a power circuit (water heating, heating, washing machine, etc. . .)It includes a three-position selector switch: temporary override, automatic mode, and stop.

Module comprises: • 15379 - 2-pole 25 A tariff meter off-peak

contactor

Module comprises: • 16655 - MIN’clic 16 A 1 to 7 min timer

• MIN'clic 1 TO 7 MIN TIMER MODULE

The module closes and then opens a contact after an adjustable preset time of up to 7 min.Override possible, continuously lit by means of a mini-selector switch on the product.

2 NO 25 A CONTACTOR MODULE

MD1AM6 009

Technical data

• Power supply:


MIN' TIMER MODULE

MD1AM6 010

Technical data

• Power supply:



• ADVANCE OFF WARNING MODULE

Used in conjunction with a timer on an incandescent lighting circuit, it warns the user that the light is about to go out by reducing the light intensity by 50% for an adjustable period of 20 to 60 seconds.

• IC 200 LIGHT-SENSITIVE SWITCH MODULE

The module starts or stops a circuit (window lighting, illuminated sign, etc.) when the light threshold detected by the cell reaches the setting threshold: from 2 to 200 lux.

Module comprises: • CCT15284 - IC200 light-sensitive switch

Module comprises: • CCT15233 - Advance off warning

ADVANCE OFF WARNING MODULE

MD1AM6 011

Technical data

• Power supply:


SWITCH MODULE

MD1AM6 012

Technical data

• Power supply:




• CDS SINGLE-PHASE LOAD SHEDDER MODULE, 1 CHANNEL

If the current drawn exceeds the preset threshold, the load shedder positioned just after the incoming circuit breaker temporarily (for 5 to 10 min) sheds circuits identified as non-priority. This prevents the nuisance tripping of the incoming circuit breaker or allows the number of receivers to be increased without changing the subscribed power demand or the subscribed power demand to be reduced.

This contactor sheds two circuits in cascade (I and II) and reconnects them in reverse order (II and I). The shed circuit is indicated by a yellow LED.It includes a forced load shedding input.The tripping set point can be set to: 5 / 10 / 15 / 20 / 25 / 30/ 40 / 45 / 50 / 60 / 75 and 90 A. It must not exceed the value to which the upstream incoming circuit breaker is set.

For safety reasons, and to comply with the wiring accessories used, do not set the load shedder to a rating above 15 A. As we have asked for the incoming circuit breaker to be set to 15 A maximum, the load shedder will not work if it is set above 15 A.

Module comprises: • 15903 - CDS load shedder contactor

Module comprises: • ALB74020 - Alcyon switch

• TO-AND-FRO SWITCH MODULE

Flush-mounted 2-channel switch, quick to install and connect; secured by means of screws and clamps.

Degree of protection:• IP20• IK02

CDS SINGLE-PHASE LOAD SHEDDER

MD1AM6 013

Technical data

• Power supply:


TO-AND-FRO SWITCH MODULE

MD1AM6 014

Technical data

• Power supply:



• PUSHBUTTON MODULE

Flush-mounted 1-channel pushbutton, quick to install and connect; secured by means of screws and clamps.


• ILLUMINATED PUSHBUTTON MODULE

Flush-mounted 1-pole pushbutton with indicator light, quick to install and connect; secured by means of screws and clamps.


Module comprises: • ALB74035 - Illuminated pushbutton

Module comprises: • ALB74030 - Alcyon single pushbutton

PUSHBUTTON MODULE

MD1AM6 015

Technical data

• Power supply:


ILLUMINATED PUSHBUTTON MODULE

MD1AM6 016

Technical data

• Power supply:




• DOUBLE PUSHBUTTON MODULE

Flush-mounted 2-circuit NO/NC double pushbutton, quick to install and connect; secured by means of screws and clamps.


Module comprises: • ALB74080 - Double pushbutton

Module comprises: • ALB74200 - 16 A socket

• 2P + T 10/16 A SOCKET MODULE

Standard flush-mounted 2-circuit electric socket with screw terminals for fast installation and connection; secured by means of screws and clamps.


DOUBLE PUSHBUTTON MODULE

MD1AM6 017

Technical data

• Power supply:


2P + T 10/16 A SOCKET MODULE

MD1AM6 018

Technical data

• Power supply:



• MOVEMENT SENSOR MODULE

Argus 360° polycarbonate movement sensor with a side sensing distance of 10 m and a front sensing distance of 16 m. It is installed on a ceiling 2.5 m above the ground.

Technical data:• Settings: Adjustable light sensitivity and timer setting• Light intensity setting: 3 to 1000 lux


• TIMER MODULE WITH ADVANCE OFF WARNING

The module closes and then opens a contact after an adjustable preset time of up to 7 min.Override possible, continuously lit by means of a mini-selector switch on theproduct.

Module comprises: • MTN564419 - Movement sensor

Module comprises: • CCT15233 - Timer with advance off warning

MOVEMENT SENSOR MODULE

MD1AM6 019

Technical data

• Power supply:


TIMER MODULE

MD1AM6 020

Technical data

• Power supply:




• ROOM TEMPERATURE SENSOR MODULE

A comprehensive range of room temperature sensors is suitable for all A comprehensive range of room temperature sensors is suitable for all requirements: public buildings, hotels, hospitals, schools and commercial requirements: public buildings, hotels, hospitals, schools and commercial centres. The sensor design makes them suitable for installation in the very centres. The sensor design makes them suitable for installation in the very latest buildings. latest buildings. Easy and flexible installation, mounted directly on the wall or on other Easy and flexible installation, mounted directly on the wall or on other supports. The sensors are compatible with Vista, Micronet/Sigma or supports. The sensors are compatible with Vista, Micronet/Sigma or Continuum.

• TH4 3-THRESHOLD THERMOSTAT MODULE

The room temperature sensor module is installed in individual or multiple occupancy homes and in service sector buildings (no adjustment of the room temperature sensor). It adjusts the temperature between +8 and +26°C on the basis of 3 power (water heating, heating, washing machine, etc.) setpoints (comfort, reduced and frost-free . .) It includes a three-position selector switch: temporary override, automatic mode, and stop.

Module comprises: • CCT15846 - Temperature sensor

Module comprises: • CCT15841 - TH4 3-threshold thermostat

LED indicators:

• Green LED: "frost-free" operation• Yellow LED: "reduced" operation• Red LED: output contact in on-position

ROOM TEMPERATURE SENSOR

MD1AM6 029

Technical data

• Power supply:


TH4 THERMOSTAT MODULE

MD1AM6 030

Technical data

• Power supply:



Operational parts


MD1AMP 004

Technical data

• Power supply:


• 15 W & 50 W LAMP BRACKET MODULES


It comprises:



• 15 W lamp bracket operational part module

MD1AMP 004• 50 W lamp bracket operational part

module MD1AMP 009

• 2 KW ROOM HEATER MODULE

The operational part comprises an electric radiator and 4-mm safety sockets for easy connection to the various control modules.

ROOM HEATER MODULE

MD1AMP 010

Technical data

• Power supply:

Rated voltage: 230 VACPower: 2000 W



• 230/400 V ROLLER SHUTTER MODULE

The module comprises a standard roller shutter which is raised and lowered by means of 4-mm safety sockets.

Height: 600 mmWidth: 550 mm


The operational part represents a motorised electric shutter. The electric shutter is controlled by two commands – "raise" and "lower".Automatic stop is available in the top position, shutter open, and bottom position, shutter closed. The control operates at 230 VAC.

The module comprises:

o A motorised shutter mechanical system

o One LED simulating a lamp inside the homeo Two black 4-mm converter sockets for the

"raise" commando One yellow LED indicating that the "raise"

command has been issuedo Two black 4-mm converter sockets for the

"lower" command

ROLLER SHUTTER MODULE

MD1AA VOLETR

Technical data

• Power supply:



MD1AMP 007

Technical data

• Power supply:



Auxiliary part• 230 VAC POWER SUPPLY MODULE

The module comprises a 10 A 30 mA earth leakage circuit breaker fitted with an undervoltage trip coil.

The power cord supplied can be plugged into a power socket.

A white "power on" LED indicates the module status

An emergency stop button cuts off the power supply instantaneously.

Set of three safety sockets (black, blue and yellow/green) for easy connection to other modules


MD1AM2 001



• Contents:




Discovery batchesThe domestic batch T1/T2, reference MD1AM6 121, comprises:

Quantity Designation Reference1 DB90/500 mA circuit breaker panel module with tariff meter MD1AM6 001

3 1P + N 10 A circuit breaker modules MD1AM6 002

1 1P + N 16 A circuit breaker module MD1AM6 003

2 1P + N 16 A residual current circuit breaker module MD1AM6 004


5 ALCYON to-and-fro switch modules MD1AM6 014

4 10/16 A socket modules MD1AM6 018



Technical and educational manual MD1ADM6 MOD

+ CD-ROM

The domestic batch T3/T4, reference MD1AM6 122, comprises:

Quantity Designation Reference1 1P + N 10 A circuit breaker module MD1AM6 002

1 1P + N 16 A circuit breaker module MD1AM6 003

2 1P + N 16 A residual current circuit breaker modules MD1AM6 004

1 16 A impulse relay module with integrated function MD1AM6 006

1 Impulse relay module with central control MD1AM6 007

1 Programmable timer switch module MD1AM6 008

1 2 NO 25 A modular contactor module MD1AM6 009


6 ALCYON single pushbutton modules MD1AM6 015

1 Double pushbutton module MD1AM6 017





+ CD-ROM


The residential and small services batch, reference MD1AM6 126, comprises :

Batch MD1AM6 126 encompasses the whole of batches MD1AM6 121, MD1AM6 122 and MD1AM6 123

Quantity Designation Reference1 DB90/500mA circuit breaker panel module with tariff meter MD1AM6 001



4 1P + N 16 A residual current circuit breaker modules MD1AM6 004


1 16 A impulse relay module with integrated function MD1AM6 006

1 Impulse relay module with central control MD1AM6 007


5 2 NO 25 A modular contactor modules MD1AM6 009


1 Advance off warning module MD1AM6 011

1 IC200 light-sensitive switch module MD1AM6 012

1 CDS single-phase load-shedding contactor module, 1 channel MD1AM6 013



3 Illuminated single pushbutton modules MD1AM6 016

1 Double pushbutton module MD1AM6 017



3 Supporting structures MD1AM 000

Technical and educational manual MD1ADM6 DOM

+ CD-ROM

The small services batch, reference MD1AM6 123, comprises:

Quantity Designation Reference1 1P + N 10 A circuit breaker module MD1AM6 002



2 MIN’clic 1 to 7 mm timer modules MD1AM6 010

1 Timer module with advance off warning MD1AM6 020



3 Illuminated single pushbutton modules MD1AMP 016



+ CD-ROM


The residential and small services energy efficiency batch, reference MD1AM6 130, comprises:


Quantity Designation Reference1 DB90/500 mA circuit breaker panel module with tariff meter MD1AM6 001






2 MIN’clic 1 to 7 mm timer modules MD1AM6 010





3 Illuminated single pushbutton modules MD1AM6 016


1 Movement sensor module MD1AM6 019

1 Room temperature sensor module MD1AM6 029

1 TH4 thermostat module MD1AM6 030


1 Electric radiator module MD1AMP 010



+ CD-ROM

Global energy managementmodules

Global energy managementmodules

Solar modular offer .................................................................................................54



Discovery batch ...................................................................................................................................................................59

iRIO telemetry modular offer ............................................................................... 60

Control part modules .......................................................................................................................................................... 61

Operational part modules ................................................................................................................................................ 66

Auxiliary part modules .......................................................................................................................................................67

Discovery batch .................................................................................................................................................................. 69






Solar modular offerPackage presentation

The Solar modular offer allows you to understand the production of energy by a solar panel.

The various topics that can be covered are:

• Identification of the equipment• The design, sizing and installation of solar panels• The properties of a solar panel, depending on the temperature, its

tilt angle, sunlight level, etc. . .• The use of an inverter• The use of a controller• The use of different battery charging and discharging modes

The Solar modular offer comprises:

Measurement module MD1AMS 001

Solar panel module MD1AMS 005

Controller moduleMD1AMS 002


Supporting structure MD1AM 000

Designation Ammeter/voltmeter moduleShunt controller module12 V battery module230 VAC inverter moduleSolar panel module


• To find out the basics of energy production by solar panels

• To learn about and identify the components

Electrical and mechanical data• Power supply:12 VDC• Dimensions (H x L x D) – weight:Structure: 1030 x 910 x 400 mm – 6.5 kgSingle module: 244 x 150 x 70 mm – 0.7 kg

Main sectors• Electrical engineering• Civil engineering



Solar modules• AMMETER/VOLTMETER MODULE

The module measures current and voltage and comprises two measuring instruments:

o Current measurement: Analogue galvanometer 0 - 500 mA o Voltage measurement: Analogue galvanometer 0 - 30 VDC

Two red and blue 4-mm safety sockets located on the left of the enclosure for the upstream connection labelled "SOLAR CELL".

• SHUNT CONTROLLER MODULE

The controller module comprises an electronic controller circuit.Control type: SeriesThe controller stops charging when the final charging voltage of the lead battery is reached (13.9 V). Charging resumes when the voltage at the battery terminals drops below 13 V.

• GREEN "OK" LED- The green LED lights up when the final

charging voltage is reached. Battery charged- The green LED is off when the final

charging voltage has not been reached.

• RED "Charge" LED- The red LED lights up when the charger

(solar panel) voltage is high enough to charge the battery.

- The red LED is off when the charger voltage is lower than the battery voltage.

This module can be connected between:- The solar panel and the controller

to measure the solar panel's output voltage and output current.

- The controller and the battery to measure the battery's charging voltage and charging current.

Two red and blue 4-mm safety sockets located on the right of the enclosure for the downstream connection labelled "USE".

AMMETER/VOLTMETER MODULE

MD1AMS 001

Technical data

• Power supply:


• Contents:


SHUNT CONTROLLER MODULE

MD1AMS 002


Rated voltage: 12 VDCBattery voltage: 12 - 14 VDCMaximum power: 50 WFinal charging voltage: 13.9 VDCController power consumption: 0.6 mA

• Contents:



• 230 VAC - 30 W INVERTER MODULE

The inverter comprises a 12 VDC - 230 VAC converter.The inverter converts the 12 V DC voltage supplied by the battery to a 230 V AC voltage.

• GREEN LED:- The green LED lights up when power is supplied to the inverter (12

VDC voltage). In this case there is an output voltage of 230 VAC, at the black terminals.

- The green LED goes out when the input voltage is insufficient for the inverter to work.

Two red and blue 4-mm safety sockets located on the right of the enclosure for the downstream connection labelled "OUTPUT 230 VAC".

This module is connected between the battery and the lamp.

Two red and blue 4-mm safety sockets located on the left of the enclosure for the upstream connection labelled "INPUT 12 VDC".

• 12 V 2.3 Ah OR 2.1 Ah BATTERY MODULE

The module comprises a 12 V lead battery.The battery capacity is 2.3 Ah or 2.1 Ah, depending on the supplier.Two fuse holders with fuses are located upstream and downstream of the battery. They protect the battery against overcurrent and short-circuits.

Fuse type: 5 x 20 F4 A 250 V

Two red and blue 4-mm safety sockets located on the right of the enclosure for the downstream connection labelled "+ and –".

This module can be connected between:- The controller and the inverter - The measurement module and the

inverter

Two red and blue 4-mm safety sockets located on the left of the enclosure for the upstream connection labelled "+ and –".

12 VDC BATTERY MODULE

MD1AMS 003

Technical data

• Power supply:

Rated voltage: 12 VDCOutput voltage: 12 VDC

• Contents:


230 VAC INVERTER MODULE

MD1AMS 004


Rated voltage: 12 VDCOutput voltage: 230 V - 50 HzOutput power (continuous): 30 WApparent power: 30 VAMaximum output power (5 min): 40 WNo-load inrush current < 0.35 A

• Contents:




• SOLAR PANEL MODULE

The polycrystalline solar panel module consists of an aluminium frame within which is fixed a rectangular one-piece element containing the photovoltaic cells.A terminal block is fixed to the rear of the panel. It is fitted with red and blue cables, with 4-mm safety connectors (cable length: 1 m) for fast connection to the various modules.When the solar panel is exposed to sunlight (or an appropriate light source), it supplies electrical energy which after being regulated is used to recharge a 12 V battery.

The energy stored in the battery is consumed by a 12 VDC - 230 VAC inverter, which powers a 230 VAC - 15 W or 50 W lamp.

This solar panel can be laid or fixed in an appropriate position facing the sun.

SOLAR PANEL MODULE

MD1AMS 005

Technical data

• Power supply:


• Dimensions (H x L x D) – weight:

Structure: 301 x 356 x 28 mm – 1.5 kg


Operational parts• 15 W LAMP BRACKET MODULE


It comprises:


o Two red and two black converter sockets for KNX bus transmission.

• 50 W LAMP BRACKET MODULE


It comprises:


o Two red and two black converter sockets for KNX bus transmission.


MD1AMP 004

Technical data

• Power supply:



MD1AMP 009

Technical data

• Power supply:




The solar batch, reference MD1AML SOL, comprises:

Discovery batch

Quantity Designation Reference1 Ammeter/voltmeter module MD1AMS 001

1 Controller module MD1AMS 002

1 12 V battery module MD1AMS 003

1 230 VAC - 30 W inverter module MD1AMS 004

1 Solar panel module MD1AMS 005

1 15 W lamp bracket module MD1AMP 004


Technical and educational manual MD1ADML SOL

+ CD-ROM

iRIO telemetry modular offerPackage presentation

The central element of the Telemetry modular offer is an iRIO controller, which collects and stores the data generated by energy and fluid meters or sensors (temperature, pressure, etc. .).

The iRIO controller can manage various data types, including pulses, Modbus serial link, M-Bus open communication or analogue data (0-10 V, PT100, PT1000, etc. .).

Using a simple web browser it can operate and control an installation remotely and can centralise the remote management and monitoring of operations via a single, easy-to-use interface.

Smart interface modules (SIM) with integrated digital inputs/outputs and analogue inputs allow the use of mixed architectures combining wired solutions and wireless Zigbee solutions. The collected data can be viewed in the form of mimic diagrams, management charts and graphs.

The iRIO controller can also provide simple control and feedback control functions (control of contactors within a time slot, chrono-proportional control of electric heating, etc. .)

The iRIO Telemetry modular offer comprises:

iRIO controller module MD1AM2 006

Power meter moduleMD1AM2 003


Supporting structure MD1AM 000

Designation Single-phase protection moduleThree-phase protection modulePower meter module - PM93 CT moduleEGX300 gateway moduleiRIO controller moduleModbus interface module (SIM10M)Zigbee interface module (SIM10Z)EGX105Z gateway moduleWi-Fi router module


• To optimise energy consumption by viewing the distribution of consumption by type of use (fluid, electricity)

• To configure an installation so as to optimise energy consumption whilst also improving the comfort of occupants

• To learn about the constraints of RT2012• To implement a remote management solution

Electrical and mechanical data• Power supply:240 V ~ single-phase• Dimensions (H x L x D) – weight:Structure: 1030 x 910 x 400 mm – 6.5 kgSingle module: 244 x 150 x 70 mm – 0.7 kgDouble module: 244 x 300 x 70 mm – 1.4 kg

Main sectors• Vocational baccalaureate (science and technology

of industry and sustainable development (STI2D), electrical engineering, energy and communication equipment (ELEEC) . .)

• BTS (vocational training certificate) in electrical engineering (ET), fluids, energies, environments (FEE . .)

• University institute of technology, electrical engineering, electronics and industrial computing

Other sectors• BTS (vocational training certificate) in design &

implementation of automated systems (CSRA) and industrial control & automatic regulation (CIRA) . .

• University institute of technology, industrial engineering & maintenance and physical measurements



iRIO telemetry modules• 230 VAC SINGLE-PHASE PROTECTION MODULE

This protection module is a single-format module. It comprises:

o A 10 A 30 mA earth leakage circuit breaker fitted with an undervoltage trip coil

o A power socket for connecting the power cord suppliedo A white "power on" LED indicates the module statuso An emergency stop button cuts off the power supply instantaneously

• THREE-PHASE PROTECTION MODULE

The three-phase protection module is a single-format module. It comprises:

o A 10 A - 30 mA earth leakage circuit breaker fitted with an undervoltage trip coil

o A power socket for connecting the power cord suppliedo A white "power on" LED indicates the module statuso An emergency stop button cuts off the power supply

instantaneously

o Set of three safety sockets (black, blue and yellow/green) for easy connection to other modules

Module comprises: • ZB6AS834 - Emergency stop button• ZB6Z2B - Complete body with NC contact• ZB6AV1 - Round white LED head• ZB6EM1B - White LED body 230V• ZB6Y009 - Sub-base for body• 24201 - C60N 10 A two-pole circuit breaker• 26509 - VIGI C60N two-pole block 30 mA - 25 A• 26960 - MN undervoltage release 230 VAC

Module comprises: • ZB6AS834 - EMERGENCY STOP button• ZB6Z2B - Complete body with NC contact• ZB6AV1 - Round white LED head• ZB6EM1B - White LED body 230 V• ZB6Y009 - Sub-base for body• 24214 - C60N 10 A three-pole circuit breaker• 26518 - VIGI C60N three-pole block 30 mA - 25 A• 26960 - MN undervoltage release 230 VAC

o Set of three safety sockets (black, blue and yellow/green) for easy connection to other modules

SINGLE-PHASE PROTECTION MODULE

MD1AM2 001

Technical data

• Power supply:


• Contents:


THREE-PHASE PROTECTION MODULE

MD1AM2 002

Technical data

• Power supply:


• Contents:



• POWER METER MODULE

The module is an electrical measurement and energy meter device for 1Ph + N, 3Ph and 3Ph + N low-voltage systems.The functions provided by a power meter have the necessary measurement capabilities for monitoring an electrical installation, including current, voltage, power, power factor, frequency and energy. The key features of power meters are as follows:o Monitoring of electrical parameters such as I, In, U, V, energy quality

standards, E, FP, Hzo Power/current demand, peak demand

• 3 CT MODULE

The module is a current transformer (CT). It is suitable for the entire low-voltage range, from 40 to 6000 A. The primary current can be measured in two different ways: CT with through primary or with primary connection by means of bolt and fixing nut.o Wide choice of ratings from 40 to 6000 Ao Safety: Sealable insulating covero Installation: on DIN rail, mounting plate or busbars

Module comprises: • METSEPM3250 - PM3250 power meter• ALB08530 - RJ45 cable / RJ45 male Cat5

Module comprises: • 16451 - 50 A toroidal core

o Time and date stamped alarmso Minimum/maximumo Management of up to 4 tariffso Up to 2 digital inputs and 2 digital

outputso Modbus communication

POWER METER MODULE

MD1AM2 003

Technical data

• Power supply:


• Contents:

RJ45 Ethernet cable

3 CT MODULE

MD1AM2 004

Technical data

• Power supply:

Rated voltage: 230 VDCCurrent transformation ratio: 50/5



• iRIO CONTROLLER MODULE

The module is an iRIO controller, which is used for:• Concentrating data/measurements (Modbus, Ethernet and serial communication, logical and analogue inputs/outputs)• Local storage of this data (with time and date stamping)• Processingo Simple mathematical calculationso Alarm detection and time and date stamping (notification via email

or SMS with GSM modem)o Simple load management• Information publishingo Customer-defined management chartso Energy management graphs

• With embedded web browser o Parameter setting and display

Module comprises: • TMYAAHRP00011 - iRIO GSM controller• ALB08530 - RJ45 cable / RJ45 male Cat5

• EGX300 GATEWAY MODULE

The EGX300 module is used as an Ethernet gateway for devices communicating via the Modbus RS485 protocol.It also offers some additional functions including display of raw data via web pages.

o 10/100 Base TX Ethernet porto RS485/RS232 (2-wire or 4-wire) serial porto Embedded web servero Short-term data storage

Module comprises: • EGX300 - Embedded gateway server• ALB08530 - RJ45 cable / RJ45 male

EGX300 GATEWAY MODULE

MD1AM2 005

Technical data

• Power supply:


• Contents:

RJ45 Ethernet cable

iRIO CONTROLLER MODULE

MD1AM2 006

Technical data

• Power supply:


• Contents:

One pair of jumpers (red and blue)Coaxial cableRJ45 Ethernet cable


• MODBUS SLAVE INTERFACE MODULE (SIM10M)

The Modbus slave module METSIM10M is connected to the EGX300 gateway in Modbus slave mode.

o 6 digital pulse or status inputso 2 analogue inputso 2 digital outputso 24 V power supply

Module comprises: • METSIM10M - Modbus slave interface

• ZIGBEE MODBUS INTERFACE MODULE (SIM10Z)

The data gathered by this SIM10Z module is retrieved directly from the iRIO controller (site management) or from the EGX300 portal server (remote management) or from an EGX100 Ethernet portal via wired or wireless networks.• Modbus RS485 wired protocolo The SIM module is connected to the iRIO controller or to the

EGX100 or EGX300 Ethernet/RS485 portals via a shielded twisted pair.

• ZigBee wireless protocolo Widely used for radio frequency

WPANs (wireless personal area networks). The SIM modules are connected to a specific EGX105Z Ethernet/ZigBee portal via a ZigBee RF network.

• This module comprises:o 6 digital pulse or status inputso 2 analogue inputso 2 digital outputs

Module comprises: • METSIM10Z - ZigBee/ModBus master interface

MODBUS INTERFACE MODULE (SIM10M)

MD1AM2 007

Technical data

• Power supply:


• Contents:

One pair of jumpers (red and blue)RJ45 Ethernet cable

ZIGBEE INTERFACE MODULE (SIM10Z)

MD1AM2 008

Technical data

• Power supply:


• Contents:

RJ45 Ethernet cableOne pair of jumpers (red and blue)



• WI-FI ROUTER MODULE

The Wi-Fi router module is a set of wireless communication protocols governed by IEEE 802.11 group standards (ISO/IEC 8802-11). It allows the wireless connection of multiple devices (computer, touch pad) within a computer network to enable them to transmit data to one another.

• EGX105Z GATEWAY MODULE

The Ethernet/ZigBee gateway module EGX105Z is a Modbus/TCP/IP web server.

It is used for:o Remote access to local I/Os on each master or battery-powered

ZigBee SIM module (Modbus emulation mode)o Routing of Modbus frames exchanged with the higher-level

monitoring and control software ("Modbus tunnelling" mode)

Module comprises: • METEGX105Z - Ethernet/ ZigBee gateway

server

EGX105Z GATEWAY MODULE

MD1AM2 009

Technical data

• Power supply:


• RJ45 Ethernet port

• Contents:


WI-FI ROUTER MODULE

MD1AM2 010

Technical data

• Power supply:


• Contents:

One pair of jumpers (red and blue)RJ45 Ethernet cable


• WATER METER MODULE

The water meter module consists of a measuring device for assessing the water consumption of an installation.A water meter is based on the principle that the volume of water flowing through a pipe cannot be accurately measured: therefore the actual flow rate is estimated. The only reliable method would be to measure the volume introduced into a container over a defined period.

• PT100 TEMPERATURE MODULE

The PT100 temperature module has a resistance of 100 Ohms at 0°C and 138.5 Ohms at 100°C. The Pt100 is no longer sufficient for meteorological characterisation. The platinum resistance sensor (or platinum resistance thermometer PRT) defined as an interpolation instrument by ITS-90 (International Temperature Scale of 1990) is the most sophisticated and can be used for very high-precision measurements. This sensor is used in conjunction with interpolating polynomials corresponding to the temperature range in question as a means of establishing the relation between platinum resistance and temperature.

Operational parts

The cost of water treatment is very high. Consumers are increasingly being required to monitor and accurately calculate their water consumption. The installation of individual water meters (in homes, businesses and industry, local authorities, etc.)is inevitable, although there is still disagreement about the best way to achieve it.

This sensor has a resistance of 25 Ohms at the triple-point temperature of water and a resistance of around 41 Ohms at the fixed-point temperature of indium (156.5985°C)

WATER METER MODULE

MD1AMP 017

Technical data

• Power supply:


• Contents:


PT100 TEMPERATURE MODULE

MD1AMP 018

Technical data

• Power supply:


• Contents:




• POWER SUPPLY MODULES

The module is a voltage converter; it can be used to deliver a 24 VDC power supply to the various modules.

This is a single-format module. It comprises:




power on

• MODBUS FIELD DISTRIBUTOR MODULE

The Modbus field distributor module is a single-format module. It comprises:

• A Modbus splitter boxo 8 x RJ45 connectorso 1 x RJ45 IN connectoro 1 x RJ45 OUT connector

Auxiliary parts

MODBUS FIELD DISTRIBUTOR MODULE

MD1AM0 011



• 10 Modbus ports

• Contents:


24 V POWER SUPPLY MODULE

MD1AM4 001

Technical data

• Power supply:


• Contents:

One pair of jumpers (red and blue)Power cable


• VARIABLE SPEED DRIVE CONTROL MODULE

This module is used for controlling a variable speed drive. It comprises:

o 4 red and blue converter sockets for the 24 VDC power supply to the module

o One green 24 VDC LED with 2 black converter socketso 4 manual selector switches labelled LI1 to LI4 are used for controlling

the variable speed drive and for selecting preprogrammed speeds. They have 4 yellow converter sockets and 1 red converter socket.

o 1 x 2.2 potentiometer with 3 black converter sockets for analogue control of the variable speed drive

o 1 x 0-10 V digital display with 2 red and blue converter sockets for displaying the variable speed drive's analogue output

• 240 VAC - 0.18 KW ALTIVAR 312 MODULE

This is a single-format module. It comprises: • A 312 variable speed drive for three-phase asynchronous motors Supply voltage: 240 VACMaximum power: 0.18 kWCommunication: Modbus and CANopenDisplay and knurled adjustment knobo 3 converter sockets (black, blue and green/yellow) for connecting

the input lineo 4 converter sockets (black and green/yellow) for connecting the

asynchronous motoro 4 yellow converter sockets labelled LI1 to

LI4 for connecting the 2-wire or 3-wire control and preprogrammed speeds, and 1 red converter socket labelled +24 V.

o 2 green converter sockets labelled R1A-R1C for connecting the NO auxiliary contact

o 2 green converter sockets labelled AOC-COM for connecting the analogue output

o 3 converter sockets (red, yellow and blue) for connecting the analogue input

Module comprises: • ATV312H018M2 - 0.18 kW variable speed drive

VARIABLE SPEED DRIVE CONTROL

MD1AM7 001

Technical data

• Power supply:


• Contents:


ALTIVAR 312 MODULE

MD1AM5 001

Technical data

• Power supply:

Rated voltage: 240 VAC single-phaseMotor: 230 - 400 V 180 W max.Delta connection

• Contents:



The iRIO telemetry batch, reference MD1AML iRIO, comprises:

Discovery batch


Quantity Designation Reference1 Power meter module - METSEPM3250 MD1AM2 003

1 + Câble RJ45

1 3 CT module MD1AM2 004

1 iRIO controller module MD1AM2 006

1 + RJ45 cable

1 Modbus Slave interface module (SIM10M) MD1AM2 007

1 + RJ45 cable

1 Zigbee Modbus interface module (SIM10Z) MD1AM2 008

1 + RJ45 cable

1 EGX105Z gateway module MD1AM2 009

1 Wi-Fi router module MD1AM2 010

1 Modbus field distributor module MD1AM0 011

1 24 VDC - 2,5 A power supply module MD1AM4 001

1 Water meter module MD1AMP 017

1 Temperature sensor module MD1AMP 018


Technical data sheet MD1ADM xxx

Technical and educational manual MD1ADM xxx

+ CD-ROM

Process and machine management

modules

Process and machine managementmodules

Automation system modular offer ......................................................................72



Auxiliary part modules ...................................................................................................................................................... 86

Discovery batches ...............................................................................................................................................................87

Motor starter modular offer ................................................................................. 90

Control part modules .......................................................................................................................................................... 91

Operational part modules ............................................................................................................................................... 101

Auxiliary part modules .....................................................................................................................................................103

Discovery batches .............................................................................................................................................................105

Variable speed drive modules ...................................................................................................................................... 100

Machine safety modular offer ............................................................................. 108

Control part modules ....................................................................................................................................................... 109

Operational part module ..................................................................................................................................................112

Auxiliary part modules ......................................................................................................................................................113

Discovery batch ..................................................................................................................................................................115






Automation system modular offerPackage presentation

The Automation system modular offer enables you to understand:

• The various types of programmable logic controllers (TWIDO, M340 and PREMIUM)

• The buses and industrial networks (Modbus, CANopen, ASi, Ethernet)

• The various types of human-machine interface terminals• Communication between PLCs, variable speed drives,

interconnected motor starters and HMI tools

Depending on the chosen modules, the user will be able to find out about the various programming types, communication functions and control functions. This offer can be used to build automation system architectures, implementing the most commonly used components and communication networks.

The Automation system modular offer comprises:

Supporting structure M340 PLC module

MD1AM0 003TWIDO PLC module

MD1AM0 002


Designation ZELIO PLC moduleTWIDO PLC moduleM340 PLC modulePremium PLC module16 discrete input PLC interface module16 discrete output PLC interface module4 analogue input/output PLC interface moduleXBTR411 panel control moduleXBTGT4340 panel control moduleEthernet hub moduleModbus field distributor moduleXBTGTW450 panel control modulePremium PLC module with counterHigh-speed counter moduleUSB interface simulator moduleHMISTU855 terminal moduleZELIO COM PLC module


• To study and implement the various types of PLCs• To study the human-machine interface• To learn about the fundamental principles of communication

Electrical and mechanical data• Power supply:230 V ~ single-phase + earth• Dimensions (H x L x D) – weight:Structure: 1030 x 910 x 400 mm – 6.5 kgSingle module: 244 x 150 x 70 mm – 0.7 kgDouble module: 244 x 300 x 70 mm – 1.4 kg

Main sectors

• Electrical engineering• Industrial engineering and maintenance

Other sectors

• Industrial science and technology



PLC modules• ZELIO PLC MODULE

The ZELIO PLC module is a double-format module. It comprises:

• On the left-hand side, a ZELIO SR3 B261BD PLC featuring: o 10 x 24 VDC discrete inputs o 6 discrete or analogue inputs o 8 x 8 A relay outputs o 2 x 5 A relay outputs• On the right-hand side: o A set of 10 switches with associated converter sockets 4-mm safety sockets for the discrete inputs o A set of 4-mm safety sockets for the discrete or analogue inputs o A set of 4-mm safety sockets for the outputs

• TWIDO PLC MODULE

The TWIDO PLC module is a single-format module. It comprises:• A TWIDO PLC comprising:

- A TWIDO TWDLMDA40DTK processor, with:o 24 x 24 VDC discrete inputso 16 transistor outputs with a 3000-instruction memory o 1 RS485 serial port- An integrated display module TWD XCP ODM- An optional RS485 serial port integrated into the display module

• An HE10 26-pin connection interface ensuring compatibility with 16 input/output modules

Module comprises: • TWDLMA40DTK - TWIDO 40 I/O base• TWDNAC485D - RS485 link module• TWDXCPODM - Integrated display module• 499TWD01100 - Ethernet coupler module• TSXCDP053 - HE10 I/O card connecting cable

This module is connected to the operational parts by means of 4-mm safety sockets and/or 25-pin and 37-pin D-sub connectors

Module comprises: • SR3B261BD - ZELIO module• SR2USB01 - USB cable for ML/PC

ZELIO PLC MODULE

MD1AM0 001



• 16 discrete inputs / 10 discrete outputs

• Contents:

One pair of jumpers (red and blue)Programming software and PC connecting cable supplied

TWIDO PLC MODULE

MD1AM0 002



• 16 discrete inputs / 10 discrete outputs (HE10)

• Contents:



• M340 PLC MODULE

The M340 PLC module is a double-format module. It comprises:

• An M340 PLC comprising:- 4-module rack BMX XBP 0400- BMX P34 2020 processor with: o 1 Modbus port and 1 Ethernet port- BMX CPS 2010 24 VDC 16.8 W power supply module- 16 discrete input/16 transistor output module BMW DDM3202K- USB-USB cable for PC programming- 20-pin HE10 discrete I/O cable- Cache (analogue module option)

• PREMIUM PLC MODULE

This PREMIUM PLC module is a double-format module. It comprises:

• A PREMIUM PLC comprising:o Extendable 6-module rack with Bus X line terminatorso TSXP57103M and TSXETY5103 processoro TSX PSY1610M 24 VDC power supply moduleo TSX DEY32D2K 32 discrete input module on HE10 connectoro 32 transistor output module TSX DSY32T2K on HE10 connectoro 2 x 20-pin HE10 leadso Cable

Module comprises: • TSXRKY6 - 6-slot rack• TSXPSY1610M - 24 VDC power supply• TSXP57103M - 32 Kword processor• TSXETY5103 - Ethernet coupler module• TSXDEY32D2K - 32 discrete input card• TSXDSY32T2K - 32 discrete output card• TSXCDP053 - HE I/O card connecting cable• TSXCRJMD25 - Mini RJ45/PC cable• TSXCUSB485 - USB converter

• Analogue I/O option- 4 analogue input/2 analogue

output module with terminal block and leads with 25-pin D-sub socket

Module comprises: • BMXXBP0400 - 4-slot rack• BMXCPS2010 - 24 VDC power supply• BMXP342020 - Ethernet TCP/IP processor• BMXDDM3202K - 32 discrete I/O 24 VDC card• BMXFCC053 - HE10 I/O card connecting cable• BMXXCAUSBH018 - USB PC/processor lead

M340 PLC MODULE

MD1AM0 003



• 16 discrete inputs / 10 discrete out-puts (HE10)

• Contents:


PREMIUM PLC MODULE

MD1AM0 004



• 16 discrete inputs / 10 discrete outputs (HE10)

• Contents:

One pair of jumpers (red and blue)PC connecting cable supplied



• 16 DISCRETE INPUT PLC INTERFACE MODULE

The 16-input PLC interface module is a single-format module. It comprises:

- 16 simulation switches for each input- 16 yellow status LEDs- 16 yellow 4-mm safety sockets for wiring each input- 2 x 20-pin HE10 connectors for connection to the PLC- 1 x 37-pin D-sub connector for connection to compatible

operational parts

• 16 DISCRETE OUTPUT PLC INTERFACE MODULE

This 16-output PLC interface module is a single-format module. It comprises:

- 16 green status LEDs- 16 green 4-mm safety sockets for wiring each relay output- 2 black 4-mm safety sockets for common connection of relay outputs- 2 safety straps for bridging common connectors on 24 VDC- 2 x 20-pin HE10 connectors for connection to the PLC- 1 x 25-pin D-sub connector for connection to compatible operational parts

16 DISCRETE INPUT PLC INTERFACE

MD1AM0 005



• 16 inputs/10 outputs on 4-mm safety soc-kets

• 37-pin D-sub connector

• Contents:


16 DISCRETE OUTPUT PLC INTERFACE

MD1AM0 006



• 16 inputs/10 outputs on 4-mm safety sockets


• Contents:

One pair of jumpers (red and blue)One pair of black jumpers

CAUTION: Not compatible with the ZELIO (MD1AM0 001) PLC module


• 4 ANALOGUE INPUT/OUTPUT PLC INTERFACE MODULE

The 4 analogue input/output PLC interface module is a single-format module. It comprises:

• On the left-hand side:o 1 x 10 K Ohm potentiometer with graduated scale and 3 associated

black 4-mm safety socketso 2 4-mm safety sockets (red and blue) supplying a fixed voltage of 10

VDC 500 mAo 8 yellow 4-mm safety sockets for the 4 analogue inputso 1 x 25-pin D-sub connector for connection to the PLC

• XBTR411 PANEL CONTROL MODULE

This XBTR panel control module is a single-format module. It comprises:

A Magelis XBTR411 operator interface terminal:

o 4 x 20 alphanumerical character lineso 8 "System" keyso 12-key numeric keypad with LEDs

25-pin D-sub connector for connection to the PLC or programming PC

Module comprises: • XBTR411 - 4-line compact terminal• XBTZ938 - M340 PLC connecting cable• XBTZ968 - TSX57 PLC connecting cable• XBTZ925 - PC/MAGELIS connecting cable• TSXCUSB485 - USB/RS485 converter

• On the right-hand side:o 1 digital voltmeter with needle, 0 - 10 VDC, with two

associated 4-mm safety sockets (red and blue)o 1 x 500-Ohm fixed resistor with two associated

black 4-mm safety sockets for current measurement (0 - 20 mA or 4 - 20 mA)

o 8 green 4-mm safety sockets for the 4 analogue outputs

o 1 x 25-pin D-sub connector for connection to the PLC

4 I/O PLC INTERFACE MODULE

MD1AM0 007



• 0 – 10 V variable

• Digital voltmeter

• Contents:


XBTR411 PANEL CONTROL MODULE

MD1AM0 008

Technical data

• Power supply:



• Contents:




• XBTGT4340 PANEL CONTROL MODULE

The XBTGT panel control module is a double-format module. It comprises:

• A graphic operator interface terminal with touch screen XBTGT 4340• A 7.5-inch TFT graphic touch screen (640 x 480)o 2 serial ports (COM1 and COM2)o 1 USB porto 32 MB of application memoryo Slot for Compact Flash memory cardo Composite video inputo Audio inputo Embedded Ethernet port (RJ45)

• ETHERNET HUB MODULE (SEE ALVIDIS HUB)

This Ethernet hub module is a single-format module. It comprises:

- A 4-port Ethernet switch- 10 Base-T Ethernet or 100 Base-Tx Fast Ethernet- Auto MDI/MDI-X (crossover cable detection)- 1 green LED for each port: Link/Data and 100 Mbps mode indicator- 1 general on/off indicator

Module comprises: • VDI533009 - 4+1 Ethernet switch• VDI517009 - Power supply connector

• RCA Video IN connector• Audio IN jack connector

Module comprises: • XBTGT4340 - Graphic terminal • ALB8531 - RJ45/RJ45 Cat. cable

XBTGT4340 PANEL CONTROL MODULE

MD1AM0 009



• Contents:


ETHERNET HUB MODULE

MD1AM0 010

Technical data

• Power supply:


• 4 x 10/100 Ethernet ports

• Contents:



• MODBUS FIELD DISTRIBUTOR MODULE

The Modbus field distributor module is a single-format module. It comprises:

• A Modbus splitter boxo 8 x RJ45 connectorso 1 x RJ45 IN connectoro 1 x RJ45 OUT connector

• XBTGTW450 PANEL CONTROL MODULE

The XBTGTW450 panel control module is a double-format module. It comprises:

• A graphic operator interface terminal with touch screen XBTGTW 450• An 8.4-inch, 262144-colour TFT graphic touch screeno 2 serial ports (COM1 and COM2)o 4 USB portso 2 RS232o 512 MB to 1024 MB RAMo Celeron M@ 600 MHz processoro Slot for Compact Flash memory cardo 2 embedded Ethernet ports (RJ45)

Module comprises: • XBTGTW450 - Graphic touch

screen terminal• XBTZ968 - PLC connecting cable• ALB08532 - Straight RJ45/RJ45 cat. cable

Module comprises: • LU9GC3 - MODBUS splitter box

MODBUS FIELD DISTRIBUTOR MODULE

MD1AM0 011

Technical data

• Power supply:


• 10 Modbus ports

• Contents:


XBTGTW450 PANEL CONTROL

MD1AM0 012

Technical data

• Power supply:


• Contents:




• PREMIUM PLC MODULE WITH COUNTER

The PREMIUM PLC module with counter is a double-format module. It comprises:

• A PREMIUM PLC comprising:o Extendable 8-module rack with Bus X line terminatorso TSXP57103M & TSXETY5103 processoro TSX PSY1610M 24 VDC power supply moduleo TSX DEY32D2K 32 discrete input module on HE10 connectoro TSX DSY32T2K 32 transistor output moduleo 2 x 20-pin HE10 leadso Cable

• HIGH-SPEED COUNTER MODULE

The HIGH-SPEED COUNTER module is used for counting parts or events, grouping objects, incoming or outgoing flow control, and measuring the lengths or positions of items. It is a single-format module. It comprises:

• One 15-pin D-sub connector per channel:o Counter sensors or incremental encodero Sensor power supplyo Encoder power supply feedback for checking that it is supplied

correctly

• 20-pin 2-channel HE10 connectoro Auxiliary inputs: preset, enableo Reflex outputso Power supplies for auxiliary I/O and

incremental encoders• These counter modules differ in terms

of the number of channels:o 2 and 4 channels

Module comprises:• TSXCDP301 - Preformed cable with leads

Module comprises: • TSXRKY6 - 8-slot rack• TSXAEY800 - 8 x 12-bit analogue input card• TSXASY800 - 8 x 12-bit analogue output card• TSXCTY2A - 2-channel counter module• TSXCAP100 - TELEFAST analogue cable

PREMIUM PLC MODULE

MD1AM0 013

Technical data

• Power supply:


• 16 discrete I/O on HE10 connectors

• Contents:


HIGH-SPEED COUNTER MODULE

MD1AM0 014

Technical data

• Power supply:


• Contents:



• USB INTERFACE SIMULATOR MODULE

The USB interface simulator module connects the 3D SIMULATOR software tool to the M340 PLC.

3D SIMULATOR is an educational software tool for teaching users how to program industrial PLCs. The simulated virtual environments are very true-to-life because of the total interactivity offered on the one hand and the realistic quality of the real-time 3D graphic animations, dynamics and sounds on the other. The simulated environment consists of a number of highly realistic systems which can be connected to an M340 PLC.Simulation avoids any risk of injury to learners or damage to equipment.

Simulated virtual environments:

- Case sorting system, the main aim of which is to transport cases from a feed conveyor towards goods lifts by sorting them by size.

- Batch mixing system, which simulates a paint mixing process. The aim is to mix the three primary colours (red, green and blue) to obtain the desired colour.

- Automatic palletiser, the aim of which is to create pallets with up to three levels of boxes- "Pick & Place" robot, which places parts inside a case by means of a 3-axis manipulator- Automated magazine, which moves, stores and retrieves cases on the shelves.

USB INTERFACE SIMULATOR MODULE

MD1AM0 015

Technical data

• Power supply:


• Contents:

One USB 1.1/2.0 cableOne pair of jumpers (red and blue)A discrete I/O programming cable HE10A CD and dongle containing the 3D SIMULATOR software tool USB interface simulator

Case sorting

Automated magazine

"Pick & Place" robot

Mixer

Palletiser



• ZELIO COM PLC MODULE

The Zelio PLC module is a double-format module. It is used for sending and receiving SMS messages. It comprises:- A Zelio 10 input/output module SR3B101BD- An Ethernet expansion module SR3NET01BD- A communication interface SR2COM01- A GSM modem (SIM card not included) SR2MOD02- A GSM antennaModule comprises: • SR3B101BD - ZELIO PLC module• SR3NET01BD - Ethernet expansion module• SR2COM01 - MODEM communication interface• SR2MOD02 - GSM communication interface

HMISTU855 TERMINAL MODULE

MD1AM0 016

Technical data

• Power supply:


• Contents:


ZELIO COM PLC MODULE

MD1AM0 018



• GSM modem

• Contents:


<

• HMISTU855 TERMINAL MODULE

The HMISTU855 Magelis STO and STU terminal module has a 5.7-inch colour graphic touch screen and features the technological innovations to enable machine productivity to be improved.

- Dedicated configuration software tool- Multiprotocol RJ45 RS485/232 ports- Mini-USB port, memory stick, USB keypad

Module comprises:• HMISTU855 - Magelis terminal• XBTZ968 - PLC connecting cable• ALB08531 - RJ45 FTP C 5 0.5 m


Operational parts• TRAFFIC MANAGEMENT MODULE

The operational part represents a traffic light configuration at an intersection. Designed for teaching users how to program industrial PLCs, it comprises:

o An intersection diagram engraved on the front panelo Two sets of three-colour traffic lights: red, amber and greeno Six black 4-mm converter sockets for controlling the two sets of lightso A pushbutton for the "PEDESTRIAN CALL" function and two

associated black 4-mm converter sockets

• AUTOMATIC BARRIER MODULE

The operational part represents an automatic barrier. Designed for teaching users how to program industrial PLCs, it comprises:

- Two motorised barriers- Four red LEDs indicating the out-of-limit position of the barriers- Six illuminated pushbuttons for manual or automatic barrier control- Two HE10 connectors for PLC I/O connections

- There are two power supply types available:o 24 V - 2.5 A power supplyMD1AM4 001o 24 V - 4.2 A power supplyMD1AM4 002

TRAFFIC MANAGEMENT MODULE

MD1AMP 003

Technical data

• Power supply:

Rated voltage: 24 VDC (2.5 A or 4.2 A)

• Contents:


AUTOMATIC BARRIER MODULE

MD1AMP 005

Technical data

• Power supply:


• Contents:





The operational part represents a motorised electric shutter. The electric shutter is controlled by two commands – "raise" and "lower". Automatic stop is available in the top position, shutter open, and bottom position, shutter closed.The control operates at 230 VAC.

The module comprises:o A motorised shutter mechanical systemo One LED simulating a lamp inside the home

• TEMPERATURE CONTROL MODULE

The operational part represents an oven in which the heating element is an incandescent lamp. Designed to help users find out more about control systems, it comprises:

o A PT100 probe and a measurement transmitter o A thermal chamber (oven), in which the heating element is an

incandescent lamp.o An AUTO/MANUAL mode switcho A potentiometer for heating control in manual mode

o Two green LEDs to indicate the shutter status

o Two black 4-mm converter sockets for the "raise" command

o Two black 4-mm converter sockets for the "lower" command

o Two yellow LEDs indicating that a "raise or lower" command has been issued

o Backup fan controlled by means of a potentiometer

o Two green converter socket for analogue control

o Two yellow converter sockets for temperature measurement at 0 - 10 V


MD1AMP 007

Technical data

• Power supply:

SELF-POWERED MODULE

TEMPERATURE CONTROL MODULE

MD1AMP 006

Technical data

• Power supply:


• Contents:



• PROCESS CONTROL MODULE

The operational part can be used to:

• Simulate an industrial process comprising:o A conveyor belto A product presence detectoro A cylinder• Generating products randomly, the exercise involves:o Conveying these products to the cylindero Stopping the conveyor belto Operating the cylinder (down then up)

The module is connected directly by HE10 connector, so it can be used directly by PLCs and does not require I/O interfacing modules.

Visualisation is provided by LEDs.

ANALOGUE SENSOR MODULE

MD1AMP 019

Technical data

• Power supply:


• Contents:


• ANALOGUE SENSOR MODULE

The operational part of the analogue sensor comprises:

o A photoelectric detector essentially comprises a light beam transmitter (light-emitting diode) and a light-sensitive receiver (photo-transistor). Detection occurs when an object enters the transmitted light beam and, in so doing, affects the intensity of the light at the receiver sufficiently to cause the output to change state.

o Steel fixing bracket

Module comprises: • XU5M18AB20D - Photoelectric detector• XUZA118 - Steel fixing bracket

PROCESS CONTROL MODULE

MD1AMP 008

Technical data

• Power supply:


• Contents:




• 2-METRE MOTORISED CONVEYOR MODULE

The operational part is a conveyor comprising:

o Green polyurethane belto Motovario reducer r = 30 (belt speed 6 m/min)o 230/400 V 120 W motoro 3 black converter sockets U1 V1 W1o 3 black converter sockets U2 V2 W2o 1 green/yellow converter socket for earth

The conveyor is fitted with 2 thru-beam photoelectric cells

2M MOTORISED CONVEYOR MODULE

MD1AMP 024

Technical data

• Power supply:

Rated voltage: 230/400 VAC


Structure: 420 x 2010 x 280 mm – 20 kgConveyor width: 80 mmBelt length: 2 m

RFID MODULE

MD1AMP 016

Technical data

• Power supply:


• Contents:

One pair of jumpers (red and blue)One batch of 10 Ositrack ISO badgesRJ45 Ethernet cable

• RFID MODULE

The RFID module is used for learning about RFID (radio-frequency identification) wireless transmission technology, based on a set of interactive cards. It also allows the concepts of traceability and identification used in various applications (logistics, access control, luggage tracking and sorting, etc.) to be studied and understood. . .)

This RFID module is a single-format module. It comprises:

o A read/write unito A Modbus/Ethernet gatewayo A MAGELIS colour graphic touch screen terminalo An RJ45 connection for connecting a PC

Module comprises:• TCSECL1M3M3S2 - M12 Ethernet cable• XGSZ33ETH - Ositrack box• XGC4901201 - Ositrack compact station• TCSESU953FN0 - ConneXium unmanaged

switch• XGHB90E340 - Ositrack ISO badge• HMISTU655 - MAGELIS graphic terminal• ALV08530 - RJ45/RJ45 straight cable• ABL7RM24025 - 24 VDC - 2.5 A power supply• XGHB90E340 - Batch of 10 Ositrack ISO

badges• XZC-P1564L05 - M12 power cable• XGSZ09L2 - M12 pre-wired supply connector


MACHINE CONTROL MODULE

MD1AM7 002

Technical data

• Power supply:


• Contents:



MD1AM4 001

Technical data

• Power supply:


• Contents:


• MACHINE CONTROL MODULE

The module can be used to control an operational part. It is a single-format module and comprises:

- A pre-wired startup sequence comprising:o An ON pushbutton and an OFF pushbuttono An emergency stop buttono An "ON" potential-free contact connected to two black 4-mm

converter sockets

• MD1AM4 001 & 002 POWER SUPPLY MODULES



• 24 VDC - 2.5 A power supply module MD1AM4 001• 24 VDC - 4.2 A power supply module MD1AM4 002

- One "cycle" indicator and two black 4-mm converter sockets

- A "START" pushbutton and normally open contact connected to two black 4-mm converter sockets

- A "STOP" pushbutton and normally closed contact connected to two black 4-mm converter sockets

- An "AUTO/MANUAL" selector switch and its NO and NC contacts, connected to four black 4-mm converter sockets

- 8 other 4-mm safety socketso 24 VDC (red converter sockets)o 0 V (blue converter sockets)





power on

Auxiliary parts



The RFID batch, reference MD1AML RFID, comprises:

Discovery batches

Quantity Designation Reference1 24 VDC 2.5 A power supply module MD1AM4 001

1 + Power cord

1 Wi-Fi router module MD1AM2 010

1 24 V power supply module MD1AM4 001

1 RFID operational part with touch screen terminal MD1AMP 016

1 + Configuration badge XG2-ZCNF01

10 + Set of RFID labels XGH-B90E340

32 + Set of adhesive cards

1 + RJ45/RJ45 cable - Length: 1 metre


Technical data sheet MD1ADM 1IND

Technical and educational manual MD1ADM 0IND

+ CD-ROM

The M340 PLC batch, reference MD1AML MR, comprises:

Quantity Designation Reference1 M340 PLC module with 1 16 I/O card MD1AM0 003

1 + HE10 connecting cable BMXFCC053

1 + PC programming cable BMXXCAUSBH018

1 16 discrete input module MD1AM0 005

1 16 discrete output module MD1AM0 006

1 24 VDC 2.5 A power supply module MD1AM4 001

1 + Power cord

1 XBTR 411 panel control module MD1AM0 008

1 + Magelis/PLC connecting cable XBTZ938

1 + Magelis/PC programming cable XBTZ925

1 + USB/RS485 converter TSXCUSB485

1 Machine control module MD1AM7 002


Technical data sheet MD1ADM1 IND

Technical and educational manual MD1ADM0 IND

+ CD-ROM


The PREMIUM PLC batch, reference MD1AML PR, comprises:

Quantity Designation Reference1 PREMIUM PLC module MD1AM0 004

4 + HE10 connecting cables TSXCDP053

1 + PC programming cable BMXXCAUSBH018



1 24 VDC 2.5A power supply module MD1AM4 001

1 + Power cord









+ CD-ROM

The TWIDO PLC batch, reference MD1AML TW, comprises:

Quantity Designation Reference1 TWIDO 24 I/16 O PLC module MD1AM0 002

2 + HE10 connecting cables TSXCDP053

1 + RJ45 mini-DIN/PC cable TSXCRJMD25




1 + Power cord









+ CD-ROM



The ZELIO PLC batch, reference MD1AML ZL, comprises:

Quantity Designation Reference1 ZELIO PLC module MD1AM0 001


1 + Power cord


1 Traffic management module MD1AMP 003




+ CD-ROM


Motor starter modular offerPackage presentation

The motor starter modular offer can be used to implement the components of a piece of power control equipment.The bench and batches are intended for studying and installing the products used for the electromechanical or electronic control of starter motors.The bench comprises educational versions of the most frequently used products.Two different educational batches are available for learning and using the main functions encountered in the implementations of electrical power control installations.

The Motor starter modular offer comprises:

Supporting structure Reversing contactor moduleMD1AM0 009

Altistart soft starter moduleMD1AM0 002

Designation TeSys U module1.6 A magnetic protection moduleThermal-magnetic protection moduleMagnetic protection moduleSwitch module with Vario switch disconnectorFused (off-load) isolator module1/1.6 A thermal relay module9 A - 24 VDC contactor moduleReversing contactor moduleAltistart soft starter moduleContactor relay moduleTime-delay contactor relay module25 A - 230 VAC contactor module9/13 A thermal relay moduleThermal-magnetic protection moduleZIGBEE - ZBRRA moduleZIGBEE - ZBRRC module380/415 V Altistart soft starter module


• To learn about the variable speed drive• To study and create the various motor

starter diagrams• To get to know the equipment and the

differences in installation• To build power control equipment

Electrical and mechanical data• Power supply:Rated motor power:230 V or 400 V - 0.18 kWControl circuit voltage:24 VDCPower circuit voltage:230 V or 400 V three-phase• Dimensions (H x L x D) – weight:Structure: 1030 x 910 x 400 mm – 6.5 kgSingle module: 244 x 150 x 70 mm – 0.7 kgDouble module: 244 x 300 x 70 mm – 1.4 kg

Main sectors

• Electrical engineering



Motor starter modules• TeSys U MODULE

The TeSys U module is is a single-format module. It comprises:• A non-reversing motor starter fitted with:o A 12 A power baseo A 0.35 to 1.4 A multifunction control unito 3 black converter sockets L1 L2 L3 for the 230 V or 400 VAC three-

phase power supplyo 3 black converter sockets T1 T2 T3 for connection of the

asynchronous motor

• 1.6 A MAGNETIC PROTECTION MODULE

The magnetic protection module is a single-format module. It comprises:

• A magnetic protection circuit-breaker, GV2L06, rating 1.6 A, fitted with:

o 3 black converter sockets L1 L2 L3 for the 230 V or 400 VAC three-phase power supply

o 3 black converter sockets T1 T2 T3 for the output connectiono Block of two NO + NO instantaneous auxiliary contacts labelled 53

- 54 and fault indicator auxiliary contacts labelled 97 - 98

o 2 red converter sockets labelled 53 - 54 for connecting the NO instantaneous auxiliary contact

o 2 red converter sockets labelled 97 - 98 for connecting the NO fault indicator contact

Module comprises: • GV2L06 - 3-pole magnetic circuit breaker• GV2AD1010 - Side-mounting NO + NO contact block

o 2 blue and red converter sockets + 24 V - 0 V for the power supply to the control unit

o 2 blue and red converter sockets A1 - A2 for connecting the coil

o 2 red converter sockets labelled 13 - 14 for connecting the NO auxiliary contact

o 2 red converter sockets labelled 21 - 22 for connecting the NC auxiliary contact

Module comprises: • LUB12 - 12 A power base - screw clamps• LUCMX6BL- Multifunction control unit

TeSys U MODULE

MD1AM1 001

Technical data

• Power supply:

Rated voltage: 400 VAC or 230 VAC – TControl voltage: 24 VDC

MAGNETIC PROTECTION MODULE

MD1AM1 002

Technical data

• Power supply:

Rated voltage: 400 VAC or 230 VAC – T


• THERMAL-MAGNETIC PROTECTION MODULE

The thermal-magnetic module is a single-format module. It comprises:

• A 1.6 A magnetic protection circuit-breaker fitted with:o 3 black converter sockets L1 L2 L3 for the 230 V or 400 V three-

phase power supplyo 3 black converter sockets T1 T2 T3 for the output connectiono Block of two NO + NO instantaneous auxiliary contacts labelled 53 -

54 and fault indicator auxiliary contacts labelled 97 - 98

• 4 A MAGNETIC PROTECTION MODULE


• A 4 A magnetic protection circuit-breaker fitted with:o 3 black converter sockets L1 L2 L3 for the 230 V or 400 V three-phase

power supplyo 3 black converter sockets T1 T2 T3 for the output connectiono Block of two NO + NO instantaneous auxiliary contacts labelled 53 -




Module comprises: • GV2L08 - 3-pole magnetic circuit breaker• GV2AD1010 - Side-mounting NO + NO contact

block



Module comprises: • GV2P06 - Thermal-magnetic circuit breaker• GVAD1010 - Side-mounting NO + NO contact

block

PROTECTION MODULE

MD1AM1 003

Technical data

• Power supply:


MAGNETIC PROTECTION MODULE

MD1AM1 004

Technical data

• Power supply:




• SWITCH MODULE WITH SWITCH DISCONNECTOR

The VARIO switch disconnector module is a single-format module. It comprises:

• A VN 12 switch disconnector, rating 12 A, fitted with:o 3 black converter sockets L1 L2 L3 for the 230 V or 400 V three-

phase power supplyo 3 black converter sockets T1 T2 T3 for the output connectiono An NO instantaneous auxiliary contact block labelled 13 - 14o 2 red converter sockets labelled 13 - 14 for connecting the NO

auxiliary contact

Module comprises: • KAF1PZ - Padlockable black handle• VN12 - Vario 12 A switch disconnector• VZN06 - NO + NC auxiliary contacts

• FUSED (OFF-LOAD) ISOLATOR MODULE

The fused (off-load) isolator module LS1D32 is a single-format module. It comprises:

• A fused (off-load) isolator LS1D32, rating 32, fitted with:

o 3 black converter sockets L1 L2 L3 for the 230 V or 400 V three-phase power supply

o 3 black converter sockets T1 T2 T3 for the output connectiono 3 10 x 38 mm 2 Amp fuseso Block of two NC + NO instantaneous auxiliary contacts labelled 13 -

14 and 21 - 22



Module comprises: • LS1D32 - 32 A fused (off-load) isolator• GVAE11 - 1 NC + 1 NO auxiliary contact block• DF2CA02 - Fuse

VARIO SWITCH MODULE

MD1AM1 005

Technical data

• Power supply:


FUSED (OFF-LOAD) ISOLATOR MODULE

MD1AM1 006

Technical data

• Power supply:



• 1 - 1.6 A THERMAL RELAY MODULE

The thermal relay module is a single-format module. It comprises:

• A thermal overload relay LRD06, rating 1 to 1.6A, fitted with:


o 3 black converter sockets T1 T2 T3 for the output connection

• 9 A - 24 VDC CONTACTOR MODULE

The 9A/24 VDC contactor module is a single-format module. It comprises:

• A 3-pole contactor LC1D09BD, rating 9 A, with:o 3 black converter sockets L1 L2 L3 for the 230 V or 400 V three-

phase power supplyo 3 black converter sockets T1 T2 T3 for the output connection

o 2 blue and red converter sockets A1 - A2 for connecting the 24 VDC coil



Module comprises: • LC1D09BD - 9 A 24 VDC 3-pole contactor

o Two NC + NO fault indicator auxiliary contacts labelled 95 - -96 and 97 - 98



Module comprises: • LRD06 - Thermal overload relay• LAD7B106 - Terminal block for thermal relay

THERMAL RELAY MODULE

MD1AM1 007

Technical data

• Power supply:


9 A - 24 VDC CONTACTOR MODULE

MD1AM1 008

Technical data

• Power supply:




• REVERSING CONTACTOR MODULE

The reversing contactor module is a single-format module. It comprises:

• A 3-pole reversing contactor, rating 9 A, with:o 6 black converter sockets L1 L2 L3 for the 230 V or 400 V three-

phase power supplyo 6 black converter sockets T1 T2 T3 for the output connectiono Mechanical interlock




Module comprises: • LC2D09BD - 9 A 24 VDC reversing contactor

• 240 V ALTISTART SOFT STARTER MODULE

The soft starter module is a single-format module. It comprises:

• An Altistart 01 soft starter, rating 6 A, with:

o 3 black converter sockets L1 L2 L3 for the 230 VAC three-phase power supply

o 3 black converter sockets T1 T2 T3 for the output connectiono 1 red converter socket labelled LI+ for the power supply to inputs

LI1 or LI2 or to both

o 2 yellow converter sockets labelled LI1 - LI2 for connecting the 2-wire or 3-wire control

o 2 red converter sockets labelled R1A-R1C for connecting the NO auxiliary contact

Module comprises: • ATS01N206LU - 6 A soft start/soft stop unit

REVERSING CONTACTOR MODULE

MD1AM1 009

Technical data

• Power supply:


ALTISTART SOFT STARTER MODULE

MD1AM1 010

Technical data

• Power supply:

Rated voltage: 230 VAC – T


• CONTACTOR RELAY MODULE

The 3 NO/2 NC 24 VDC contactor relay module is a single-format module. It comprises:

o TeSys U CAD-32 – 3 NO + 2 NC – instantaneous contactor relayo Operating current 10 Ao Control voltage 24 VDC, with interference suppression

- Connection to 10 red converter sockets

• TIME-DELAY CONTACTOR RELAY MODULE

The TIME-DELAY CONTACTOR RELAY module, with a time delay of 1 to 30 s and 4-mm adaptors, is used for delaying the action of a contactor (on or off). It comprises:

o TeSys time-delay auxiliary contact blocko 2 delayed-action contacts (1 NO + 1 NC), with a time delay of 1 - 30 so Front-mounted, connected to screw clamp terminalso 4 red 4-mm converter sockets

Module comprises: • LADS2 - Delayed-action auxiliary contact block


o 2 red converter sockets labelled 13 - 14 for connecting the NO contact



o 2 red converter sockets labelled 21 - 22 for connecting the NC contact

o 2 red converter sockets labelled 31 - 32 for connecting the NC contact

Module comprises: • CAD32BD - 3 NO + 2 NC contactor relay

CONTACTOR RELAY MODULE

MD1AM1 011

Technical data

• Power supply:


TIME-DELAY CONTACTOR RELAY

MD1AM1 012

Technical data

• Power supply:




• 25 A - 230 VAC CONTACTOR MODULE

The contactor module is a single-format module. It comprises:

• A 3-pole contactor LC1D25P7, rating 25 A, with:



o 2 blue and red converter sockets A1-A2 for connecting the 230 VAC coil



Module comprises: • LC1D25U7 - 15 A 3-pole contactor

• 9/13 A THERMAL RELAY MODULE

The thermal relay module is a single-format module. It comprises:

• A thermal overload relay, rating 9 to 13 A, fitted with:



o Two NC + NO fault indicator auxiliary contacts labelled 95 - 96 and 97 - 98



Module comprises: • LRD16 - Thermal overload relay• LAD7B106 - Terminal block for thermal relay

25 A CONTACTOR MODULE

MD1AM1 013

Technical data

• Power supply:


9/13 A THERMAL RELAY MODULE

MD1AM1 014

Technical data

• Power supply:



• THERMAL-MAGNETIC PROTECTION MODULE


• A magnetic protection circuit-breaker fitted with:o 3 black converter sockets L1 L2 L3 for the 230 V or 400 V three-

phase power supply o 3 black converter sockets T1 T2 T3 for the output connectiono Block of two NO + NO instantaneous auxiliary contacts labelled 53 -




• ZIGBEE - ZBRRA MODULE


• A ZBRRA programmable receiver with 2 relay outputs

Module comprises: • ZBRRA - 24 V programmable receiver

This module can be used with the ZigBee control station, reference MD1AM7 003

o 4 blue and red converter sockets labelled + 24 V and 0 V for the 24 V power supply to the module

o 3 red converter sockets labelled 11 - 12 - 14 for connecting the NO and NC contacts of relay Q1

o 3 red converter sockets labelled 21 - 22 - 24 for connecting the NO and NC contact of relay Q2

Module comprises: • GV2P03 - Thermal-magnetic circuit breaker• GVAD1010 - Side-mounting contact block

PROTECTION MODULE

MD1AM1 015

Technical data

• Power supply:

Rated voltage: 400 VAC or 230 VAC - T

ZIGBEE - ZBRRA MODULE

MD1AM1 016

Technical data

• Power supply:


• Contents:

One pair of jumpers (red and blue)PC connecting cable supplied



• ZIGBEE - ZBRRC MODULE


A ZBRRC programmable receiver with 4 PN 3W outputs

o 4 blue and red converter sockets labelled + 24 V and 0 V for the 24 VDC power supply to the module

o 4 green converter sockets labelled Q1 to Q4 for connecting to the outputs

o 4 blue converter sockets labelled 0 V for common connection of the outputs

This module can be used with the ZigBee control station, reference MD1A7 003

Module comprises: • ZBRRC - 24 VDC programmable receiver

• 380/415 V ALTISTART SOFT STARTER MODULE

The soft starter module is a single-format module. It comprises:

• An Altistart 01 soft starter, rating 6 A, with:o 3 black converter sockets L1 L2 L3 for the 400 VAC three-phase

power supplyo 3 black converter sockets T1 T2 T3 for the output connectiono 1 red converter socket labelled LI+ for the power supply to inputs LI1

or LI2 or to both

o 2 yellow converter sockets labelled LI1 - LI2 for connecting the 2-wire or 3-wire control

o 2 red converter sockets labelled R1A-R1C for connecting the NO auxiliary contact

Module comprises: • ATS01N206NQ - 6 A soft start/soft stop unit

ZIGBEE ZBRRC MODULE

MD1AM1 017

Technical data

• Power supply:


• Contents:


ALTISTART SOFT STARTER MODULE

MD1AM1 018

Technical data

• Power supply:

Rated voltage: 400 VAC – T


Variable speed drive modules• 240 VAC - 0.18 KW ALTIVAR 312 MODULE

This is a single-format module. It comprises: • A 312 variable speed drive for three-phase asynchronous motors Supply voltage: 240 VACMaximum power: 0.18 kWCommunication: Modbus and CANopenDisplay and knurled adjustment knobo 3 converter sockets (black, blue and green/yellow) for connecting the

input lineo 4 converter sockets (black and green/yellow) for connecting the

asynchronous motoro 4 yellow converter sockets labelled LI1 to

LI4 for connecting the 2-wire or 3-wire control and preprogrammed speeds, and 1 red converter socket labelled +24 V.




• 240 VAC - 0.18 KW ALTIVAR 12 MODULE

This is a single-format module. It comprises: • A 12 variable speed drive for three-phase asynchronous motors Supply voltage: 240 VACMaximum power: 0.18 kWCommunication: Modbus and CANopenDisplay and knurled adjustment knobo 3 converter sockets (black, blue and green/yellow) for connecting

the input lineo 4 converter sockets (black and green/yellow) for connecting the

asynchronous motor

o 4 yellow converter sockets labelled LI1 to LI4 for connecting the 2-wire or 3-wire control and preprogrammed speeds, and 1 red converter socket labelled +24 V.



o 3 converter sockets (red, yellow and blue) for connecting the analogue input


ALTIVAR 312 MODULE

MD1AM5 001

Technical data

• Power supply:

Rated voltage: 240 VAC single-phaseMotor: 230/400 V - 180 W max.Delta connection

• Contents:


ALTIVAR 12 MODULE

MD1AM5 002

Technical data

• Power supply:

Rated voltage: 240 VAC single-phaseMotor: 230/400 V - 180 W max.Delta connection

• Contents:




Operational parts

• 1-METRE MOTORISED CONVEYOR MODULE

The operational part is a conveyor comprising:

o Green polyurethane belto Motovario reducer r = 30 (belt speed 6 m/min)o 230/400 V 120 W motoro 3 black converter sockets U1 V1 W1o 3 black converter sockets U2 V2 W2o 1 green/yellow converter socket for earth

The conveyor is fitted with a photoelectric cell.

• 230/400 V ASYNCHRONOUS MOTOR MODULE

The operational part consists of a base-mounted 180 W - 230/400 V - 1300 rpm asynchronous motor

Weight: 7 kgHeight: 250 mm

Length: 390 mmWidth: 205 mm

o 3 black converter sockets labelled U1-V1-W1 and 3 black converter sockets labelled U2-V2-W2 for the motor windings

o 1 green/yellow converter socket for earth

ASYNCHRONOUS MOTOR MODULE

MD1AMP 001

Technical data

• Power supply:

Rated voltage: 230/400 VACPower: 180 W

1M MOTORISED CONVEYOR MODULE

MD1AMP 002

Technical data

• Power supply:

Rated voltage: 230/400 VAC


Structure: 420 x 1005 x 280 mm – 10 kgConveyor width: 80 mmBelt length: 1 m


• 400/690 VAC ASYNCHRONOUS MOTOR MODULE

The operational part consists of a base-mounted 180 W - 400/690 V - 1300 rpm asynchronous motor



• 230/400 V - 180 W MOTORISED FAN MODULE WITH COLUMN AND BALL



The operational part is a motorised centrifugal fan.A diaphragm and a transparent column are attached to the fan output.In the transparent column a foam ball shows the flow of expelled air.The diaphragm can be used to vary the flow so that the ball is positioned between the two markers at the top of the column.

ASYNCHRONOUS MOTOR MODULE

MD1AMP 013

Technical data

• Power supply:

Rated voltage: 400 V/690 VACPower: 180 W

MOTORISED FAN MODULE

MD1AMP 014

Technical data

• Power supply:

Rated voltage: 230/400 VACPower: 180 W



Auxiliary parts

• MACHINE CONTROL MODULE

The module is used for controlling a motor starter. It is a single-format module and comprises:

- A pre-wired startup sequence comprising:o An ON pushbutton and an OFF pushbuttono An emergency stop buttono An "ON" potential-free contact connected to two black 4-mm

converter sockets- One "cycle" indicator and two black 4-mm converter sockets

- A "START" pushbutton and normally open contact connected to two black 4-mm converter sockets


- An "AUTO/MANUAL" selector switch and its NO and NC contacts, connected to four black 4-mm converter sockets

• VARIABLE SPEED DRIVE CONTROL MODULE

This module is used for controlling a variable speed drive. It comprises:

o 4 red and blue converter sockets for the 24 VDC power supply to the module

o One green 24 VDC LED with 2 black converter socketso 4 manual selector switches labelled LI1 to LI4 are used for controlling

the variable speed drive and for selecting preprogrammed speeds. They have 4 yellow converter sockets and 1 red converter socket.

o 1 x 2.2 potentiometer with 3 black converter sockets for analogue control of the variable speed drive

o 1 x 0-10 V digital display with 2 red and blue converter sockets for displaying the variable speed drive's analogue output

VARIABLE SPEED DRIVE CONTROL

MD1AM7 001

Technical data

• Power supply:


• Contents:


MACHINE CONTROL MODULE

MD1AM7 002

Technical data

• Power supply:


• Contents:



• MD1AM4 001 & 002 POWER SUPPLY MODULES



• 24 VDC 2.5 A power supply module MD1AM4 001• 24 VDC 4.2 A power supply module MD1AM4 002





power on

• 230 VAC POWER SUPPLY MODULE

The protection module is a single-format module. It comprises:

o A 10 A 30 mA earth leakage circuit breaker fitted with an undervoltage trip coil

o A power socket for connecting the power cord suppliedo A white "power on" LED indicates the module statuso An emergency stop button cuts off the power supply instantaneously

o Set of three safety sockets (black, blue and yellow/green) for easy connection to other modules.


MD1AM4 001

Technical data

• Power supply:


• Contents:



MD1AM2 001

Technical data

• Power supply:


• Contents:

Power cable



Discovery batchesThe motor starter batch, reference MD1AML DM, comprises:

Quantity Designation Reference1 TeSys U U starter module MD1AM1 001

1 Magnetic circuit breaker module MD1AM1 002

1 Thermal-magnetic circuit breaker module MD1AM1 003

1 Switch disconnector module MD1AM1 005

1 Fused (off-load) isolator module MD1AM1 006

1 Thermal relay module MD1AM1 007

3 Contactor modules MD1AM1 008

1 Reversing contactor module MD1AM1 009

1 Time-delay relay module MD1AM1 012

1 Altistart soft starter module MD1AM1 018

1 Motor starter control module MD1AM7 004

1 24 VDC 2.5A power supply module MD1AM4 001

1 + Power cord



Technical and educational manual MD1ADM2 INDVV

+ CD-ROM


The energy efficiency ventilation batch, reference MD1AML ATVEE,comprises:

Quantity Designation Reference1 Magnetic protection module MD1AM1 004

1 Thermal relay module MD1AM1 007

1 Contactor module MD1AM1 008

1 Power meter module PM9 MD1AM2 003

1 3 CT module MD1AM2 004

1 EGX300 gateway module MD1AM2 005

1 + USB/RS485 converter TSXCYSB485

1 + RJ45/RJ45 cable - Length 1 metre VDIP184546010

1 + USB/RJ45 cable - Length 2.5 metres TCSMCNAM3M002P


1 Altivar 312 variable speed drive module MD1AM5 001

1 Variable speed drive control module MD1AM7 001

1 Illuminated selector switch module MD1AM7 004

1 230/400 V fan unit module with column and ball MD1AMP 014


Technical and educational manual MD1AD ATVEE

+ CD-ROM



The altivar 312 batch, reference MD1AML ATV312, comprises:

The altivar 12 batch, reference MD1AML ATV12, comprises:

Quantity Designation Reference1 Altivar 312 module - 0.18 kW MD1AM5 001

1 Thermal-magnetic protection module MD1AM1 004


1 230/400 V - 0.18 kW asynchronous motor module MD1AMP 001




+ CD-ROM

Quantity Designation Reference1 Altivar 12 module - 0.18 kW MD1AM5 001



1 230/400 V - 0.18 kW asynchronous motor module MD1AMP 001




+ CD-ROM


Machine safety modular offerPackage presentation

The package can be used to carry out a risk analysis and to implement solutions that meet the current standards:• EN/ISO 12100: General design principles• EN 954-1: Solution category• EN ISO 13849-1: Maximum performance level of the solution• EN IEC 62061: Maximum safety integrity level of the solution (SIL).

This last standard (Safety Integrity Level SIL) takes account of the use of new technologies in products and safety solutions and suggests guidelines for calculating the probability of a breakdown.The safety integrity level (SIL) is the new evaluation, defined by standard IEC 61508, concerning the probability of failure of a function or safety system.

The machine safety modular offer implements certain safety components. These modules ensure maximum protection for all safety functions present in an automated system chain.

The safety functions covered are:• Monitoring the emergency stop and safety limit switches• Coded magnetic switch monitoring• Zero speed control in conjunction with a key-operated safety limit

switch

The Machine safety modular offer comprises:

Supporting structure

Emergency stop module

Safety limit switch monitoring module

Designation Safety module for emergency stop monitoringSafety module for emergency stop + limit switch monitoringSafety module for coded magnetic switch monitoringSafety module for time delay monitoringSafety module for zero speed monitoringSafety module for time delay monitoring


• To find out about the devices to be implemented for making an industrial machine safe

• To determine the risk levels• To understand the legislation in force

Electrical and mechanical data• Power supply:Rated motor power:230 V single-phase + T• Dimensions (H x L x D) – weight:Structure: 1030 x 910 x 400 mm – 6.5 kgSingle module: 244 x 150 x 70 mm – 0.7 kgOperational part: 640 x 1000 x 410 mm – 29 kg

Main sectors

• Industrial engineering and maintenance• Electrical engineering



Machine safety modules• EMERGENCY STOP MODULE – XPS AC5121 – EN954-

1/ISO 13849-1 CATEGORY 4

Safety module XPS AC5121 is used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1 and it also meets the safety requirements for the electrical monitoring of switches in protection devices conforming to standard EN 1088/ISO 14119.It provides protection for both the machine operator and the machine by immediately stopping the dangerous movement on receipt of a stop instruction from the operator, or on detection of a fault in the safety circuit itself.

• EMERGENCY STOP AND LIMIT SWITCH MODULE – XPSAF5130 – EN954-1 ISO 13849-1 CATEGORY 4

The safety module XPS AF5130 is designed in accordance with EN 954-1 category 4.It is used for monitoring emergency stop circuits conforming to standards EN/ISO 13850 and EN/IEC 60204-1.For electrical monitoring of switches activated by protection devices conforming to standard EN 1088.

To aid diagnostics, the module has 3 LEDs on the front panel which provide information on the monitoring circuit status.The Start button monitoring function is configurable depending on the wiring.

To aid diagnostics, the module has LEDs which provide information on the monitoring circuit status.The XPS AC module has 3 safety outputs and a solid-state output for signalling to the PLC.

Module comprises: • XPSAC5121 - Emergency stop monitoring

safety device

Module comprises: • XPSAF5130 - Emergency stop and limit switch

monitoring safety device

EMERGENCY STOP MODULE

MD1AM9 001

Technical data

• Power supply:


• Contents:


EMERGENCY STOP + LIMIT SWITCH

MD1AM9 002

Technical data

• Power supply:


• Contents:



• CODED MAGNETIC SWITCH MODULE – XPS DMB1132 – EN954-1/ISO 13849-1 CATEGORY 4

The safety module XPS DMB1132 is designed for monitoring coded magnetic safety switches. It features two safety outputs and two solid-state outputs for signalling to the process PLC.In compliance with EN 954-1/ISO 13849-1 category 4, the XPS DMB1132 module can monitor two independent sensors. To monitor a larger number of sensors using this safety module, the sensors can be connected in parallel series, in compliance with the requirements of EN 954-1/ISO 13849-1 category 3.

• TIME DELAY MODULE – XPS TSA5142P – EN954-1/ISO 13849-1 CATEGORY 3

The XPS TSA5142P safety module is used in applications requiring a safety time delay with interlock on inertia machines (guards are unlocked at the end of the safety time delay).The time delay of safety circuits can be set to 16 preset values, using 2 selectors located on the front panel of the module.

To aid diagnostics, the module has LEDs which provide information on the monitoring circuit status and 2 solid-state outputs for signalling to the process PLC.

Module comprises: • XPSTSA5142P - Time delay monitoring

To aid diagnostics, the modules have LEDs on the front panel which provide information on the monitoring circuit status.

Module comprises: • XPSDMB1132 - Switch monitoring safety device

MAGNETIC SWITCH MODULE

MD1AM9 003

Technical data

• Power supply:


• Contents:


TIME DELAY MODULE

MD1AM9 004

Technical data

• Power supply:


• Contents:




• ZERO SPEED MODULE – XPS VNE1142P – EN954-1/ISO 13849-1 CATEGORY 3

The Preventa safety module XPSVNE11342P for zero speed detection is used to detect the stop condition of electric motors. Their most common applications include: providing the unlock signal for electrically interlocked movable machine guards, controlling rotation direction signals for reversing motors and engaging locking brakes after a motor has come to a standstill.When electric motors slow down, a remanent voltage is produced in the windings of the motor due to residual magnetism. This voltage is proportional to the speed of the motor and therefore decreases as the motor slows.This remanent voltage is measured in a redundant manner so as to detect the stop condition of the motor.

The cabling between the motor windings and the inputs of the XPS VNE module is also monitored to prevent a stoppage being simulated in the event of a broken cable.A transformer should not be used to connect the motor to terminals Z1, Z2 and Z3 since there is no monitoring of the connection with the motor winding via the resistance monitoring.

Module comprises: • XPSVNE1142P - Zero speed monitoring

• TIME DELAY MODULE – XPS TSW5142P – EN954-1/ISO 13849-1 CATEGORY 3

The XPS TSW5142P safety module is used in applications requiring a safety time delay with a safety switchover contact (shunting contact in association with XPS VN modules for zero speed monitoring, solenoid valve monitoring).

The time delay of safety circuits can be set to 16 preset values, using 2 selectors located on the front panel of the modules. To aid diagnostics, the modules have LEDs which provide information on the monitoring circuit status and 2 solid-state outputs for signalling to the process PLC.

Module comprises: • XPSTSW5142P - Time delay monitoring

ZERO SPEED MODULE

MD1AM9 005

Technical data

• Power supply:


• Contents:


TIME DELAY MODULE

MD1AM9 006

Technical data

• Power supply:


• Contents:



Operational part• MACHINE SAFETY BENCH MODULE

The operational part simulates a machine movement protected by a grid and a fan which also has a grid.

o In the top left, a movable protective casing together with two limit switches labelled S01 and S02. Next to each limit switch, the 6 corresponding safety sockets for connection purposes.Behind the protective casing is an asynchronous motor with reducer and exposed disc. This device can be used to simulate a machine in operation. Underneath are the 6 corresponding safety sockets U1 - V1 - W1 and U2 - V2 - W2 together with a male green/yellow earth socket for connection purposes.

o In the top right, a movable protective casing together with a limit switch labelled S03 and a safety limit switch with interlock and solenoid lock labelled S1/Y1. Next to the limit switch S03, the 6 corresponding safety sockets for connection purposes.Below the safety limit switch with electrical interlock, safety sockets labelled S1 for the corresponding contacts and Y1 for the corresponding solenoid.Behind the protective casing is a 230 VAC fan, which can be used to simulate a high-inertia machine. In the centre is a mushroom head emergency stop button and the corresponding 4 safety sockets.

Module comprises: • XCSM3902L1 - Limit switch with roller plunger• XCSDMP5902 - Magnetic switch• XCSE5312 - Safety limit switch with electric lock• XCSZ01 - Straight actuator key• XB4BA51 - Yellow pushbutton with 1 NO contact

• XB4BVB5 - Complete indicator with yellow LED• ZB4BW7A1721 - Pushbutton head• ZB4BW0B35 - Complete body with green LED• ZB4BS54 - Emergency stop button• ZB4BZ104 - Complete body with 2 NC contacts

MACHINE SAFETY BENCH MODULE

MD1AMP 011

Technical data

• Power supply:



Structure: 640 x 1000 x 410 mm – 29 kg



Auxiliary parts

• THERMAL-MAGNETIC MODULE GV2P06


• A magnetic protection circuit-breaker, GV2P07, rating 1.6 A, fitted with:


o 3 black converter sockets T1 T2 T3 for the output connectiono Block of two NO + NO instantaneous auxiliary contacts labelled 53

- 54 and fault indicator auxiliary contacts labelled 97 - 98



• 24 VDC 2.5 A POWER SUPPLY MODULE






power on

24 VDC 2.5 A POWER SUPPLY MODULE

MD1AM4 001

Technical data

• Power supply:


• Contents:


THERMAL-MAGNETIC MODULE

MD1AM1 003

Technical data

• Power supply:

Rated voltage: 230 V - 400 VAC three-phase


• CONTACTOR MODULE

The 9 A/24 VDC LC1D09BD contactor module is a single-format module. It comprises:

• A 3-pole contactor LC1D09BD, rating 9 A, with:



o 2 blue and red converter sockets A1 - A2 for connecting the 24 VDC coil.



CONTACTOR MODULE

MD1AM1 008

Technical data

• Power supply:




Discovery batchThe machine safety batch, reference MD1AML SECU, comprises:

Quantity Designation Reference1 Safety module for emergency stop monitoring MD1AM9 001

1 Safety module for emergency stop + limit switch monitoring MD1AM9 002

1 Safety module for coded magnetic switch monitoring MD1AM9 003

1 Safety module for time delay monitoring MD1AM9 004

1 Safety module for zero speed monitoring MD1AM9 005

1 Safety module for time delay monitoring MD1AM9 006

1 24 VDC power supply module MD1AM4 001


3 Contactor modules MD1AM1 008


Machine safety documentation FRAED209950FR

Technical data sheet MD1ADM9 SM1

Technical and educational manual MD1ADM9 SM2

+ CD-ROM

Accessories and additional

modules

Accessories and additional modules

Operational part modules .................................................................................... 118

MD1AMP 021 .........................................................................................................................................................................118

MD1AMP 022 ........................................................................................................................................................................118

Control / command modules ............................................................................... 119

MD1AM7 003 .........................................................................................................................................................................119

MD1AM7 004 .........................................................................................................................................................................119

Safety leads batch ..................................................................................................120

Training courses ..................................................................................................................................................................121

Website ................................................................................................................................................................................. 122






• LAMP + DALI BALLAST MODULE

The operational part comprises a lamp and a DALI BALLAST.

DALI (Digital Addressable Lighting Interface) is a non-proprietary standard interface for electronic dimming ballasts offering improved functionality and ease of use. Up to 64 DALI electronic ballasts can be controlled with a high degree of flexibility by means of a control line with two connectors, either individually or in up to 16 groups without addresses.

DALI offers almost limitless possibilities. Lighting control, cubicles, operating devices, electronic ballasts and lamps, all are covered by this standard professional interface. Unrestricted two-way communication allows top-quality management of light. DALI – a common interface for all components.

• LAMP + 1 - 10 V BALLAST DIMMER MODULE

The operational part comprises a lamp and a 1 - 10 V ballast dimmer and consists of a 15 W incandescent lamp. It is designed to be used as a load on KNX modules, for example.

Dimmers are static converters which convert a FIXED alternating current into a VARIABLE current.

Startup and dimming are controlled from the command line. There is no need to install relays. Important information such as lamp status is stored in the ballast and available to the controller.

DALI MODULE

MD1AMP 021

Technical data

• Power supply:


• Contents:


LAMP + DIMMER SWITCH MODULE

MD1AMP 022

Technical data

• Power supply:


• Contents:




• ZIGBEE CONTROL STATION MODULE

The ZIGBEE CONTROL STATION module uses the ZigBee compatible wireless and batteryless protocol. It is the most widely used protocol in the industry.ZigBee is the international wireless language connecting highly disparate devices to enable them to work together and improve people's day-to-day life.


- 8 other 4-mm safety socketso 24 VDC (red converter sockets)o 0 V (blue converter sockets)

Module comprises: • XB6AW3B1B - Green pushbutton 1 NO 24 VDC• XB6AA42B - Red pushbutton 1 NC 24 VDC• ZB6AS834 - Emergency stop pushbutton• ZB6Z2B - Complete body with NC contact

• MOTOR STARTER CONTROL MODULE

The module can be used to control an operational part. It is a single-format module and comprises:- A pre-wired startup sequence comprising:o An emergency stop buttono An "ON" potential-free contact connected to two black 4-mm converter socketso 0 V (blue converter sockets)- Two LEDs and four black 4-mm converter sockets

Module comprises: • ZBRT1 - Transmitter for wireless button• ZB5RZA0 - Spring-return pushbutton head• ZB5AZ009 - Mounting base for XB5 body• ZBA79 - Set of 10 coloured caps with markings• XALD04 - Complete control station with 4 XB5 units

ZIGBEE CONTROL STATION MODULE

MD1AM7 003

Technical data

• Power supply:

SELF-POWERED MODULE

MOTOR STARTER CONTROL MODULE

MD1AM7 004

Technical data

• Power supply:


• Contents:



Highly flexible, silicone or PVC-insulated measuring leads, fitted at each end with a 4-mm piggyback blade connector protected by a rigid insulating sleeve.

Safety lead batchThe safety lead batch, reference MD1AA CORDONS, comprises:

Designation Length6 x 4-mm safety leads, black L = 0,25 m6 x 4-mm safety leads, red L = 0,25 m6 x 4-mm safety leads, blue L = 0,25 m6 x 4-mm safety leads, black L = 0,50 m6 x 4-mm safety leads, red L = 0,50 m6 x 4-mm safety leads, blue L = 0,50 m3 x 4-mm safety leads, black L = 0,75 m2 x 4-mm safety leads, red L = 0,75 m3 x 4-mm safety leads, blue L = 0,75 m3 x 4-mm safety leads, black L = 1 m2 x 4-mm safety leads, red L = 1 m3 x 4-mm safety leads, blue L = 1 m2 x 4-mm safety leads, yellow L = 1 m1 x 4-mm safety lead, black L = 2 m1 x 4-mm safety lead, blue L = 2 m

Technical data sheet:


Training courses


Schneider Electric runs training courses and workshops for trainers in

connection with academic training programmes.

For public-sector trainers, the registration details can be found on the CERPET website: www.cerpet.education.frFor private-sector trainers, the registration details can be found on the CTPN website: www.ctpn.asso.fr/stages_Ist.php3, from the beginning of January of each year.

Examples of courses run in 2013 :

• Unity: Unity basics and programming, 4 days• KNXC: KNX home automation: KNX certification, 5 days• OLPV: Photovoltaics: Basics of home installation (distance training, 30 min)• ONDPV: Photovoltaic inverter: Choosing the right inverter, 2 days• ERENO: Renewable energies: Introduction to renewable energies, 1 day• BBC12: Building tightness: Impact of RT2012 and low-energy buildings on electricians, 1 day• SOMAC: Automation systems: Designing and implementing a machine with SoMachine, 3 days• SOATV: SoMachine: Designing and implementing a machine with a variable speed drive, 2 days• RLI: Networks and fieldbuses, 4 days

A variety of workshops are available in connection with academic training programmes:

• JTECO: Energy efficiency: Saving energy in electrical networks• JBECO: Energy efficiency: Sustainable building solutions• JTDET: Detection: The various methods of detection• JTDM: Motor starters: Controlling and protecting electric motors• JTVV: Speed control: Understanding the principles and products• RT012: Temperature control• JTCER: Reactive power: Compensation in environments subject to interference• JTFDR: Lightning: Protecting your electrical installation• BTCOM: Networked switchboard

With a team of trainers from the world ofindustry and the very latest training resources, Energy training offers support to help you give your trainees the best possible training experience.

SEF Energy training :• Guaranteed resultso Face-to-face and distance training• The reassurance of a high-quality serviceo Certified to ISO 9001 V 2000o Complies with the quality charter of FIEEC training centreso Approved by the Comité des Travaux Sous Tension (body regulating live electrical work)

• Assessmentso Before training: Free online prerequisite tests for self-testing and to help select the right courseo After training: Evaluation of knowledge gained during the course

• Available in France and throughout the world

Access at preferential rates to all courses in the Schneider Electric Training catalog

Visit our website: www.schneider-electric.com/energy-training

Agrément du comité des travaux sous tension

Training Catalog 2014

La formationpar le spécialiste mondial

de la gestion de l'énergie

> Catalogue 2014


WebsiteFind out more about the full Schneider Electric offering on the website:


Under Energy training (Educational equipment) you will find:• Details of educational solutions:o Technical skillso Practical exercises• Information about Schneider Electric businesses• Contact details

Energy UniversityTraining modules offer a way of acquiring the necessary skills to measure, analyse, control and reduce consumption. By implementing the solutions proposed by Energy University you can save up to 30% on your energy bill. Given that energy costs are set to rise substantially over the coming years, particularly due to growing demand in emerging countries, that is a significant saving.

Visit the Energy University website:

www.myenergyuniversity.com



Energy training Project managers

Yvan BRIENProject managerMobile : 06 08 31 62 [email protected]

Matthieu LAURASProject managerMobile : 06 80 42 87 [email protected]

Jean - Marc GONZALESProject managerMobile : 06 83 83 73 [email protected]

Notes

Need more information ?A website to inform youwww.schneider-electric.com

[email protected] : +33 (0)1 41 39 60 76

Schneider Electric FranceEnergy training

Operating division technical and higher education35 rue Joseph MonierCS 3032392506 Rueil-Malmaison Cedex

Due to changes in standards and equipment, properties indicated in texts and images within this documents are binding only after confi rmation by our departments

Conception, realization : Schneider Electric France Energy trainingPhotos : Schneider Electric France Energy training

03/2014

10-31-1247

Date post:	19-Mar-2018
Category:	Documents
Upload:	buidung
View:	213 times
Download:	1 times

Catalog 2014 Energy training solutions - Schneider · PDF file2 Modular offers catalog 2014...

Documents