Catalog - Sisdentsisdent.ro/wp-content/uploads/2016/07/novamindenRO.pdf · Catalog Componente...

CatalogComponente protetice pentru implanturi dentare

ROM

ANA

2015

/201

6

Novamind PC, 31 Fokidos Str., 11527 Athens Tel.: +30 210 5233 307

www.novamind.gr - [email protected]

A few words for the Novamind products

Our company has created a technologically evolved production station, equipped with devices of latest technology. It is operated by highly trained specialists and is approved and certified with ISO from the Greek Center of Quality Control and Technology of Health.

This new production station is unique in Greece and certainly at least comparable to other similar manufacturers in Europe.

Novadental can offer nowadays prosthetic components of high quality and precision compatible with most widely used implant systems.

The contents of this catalog are subject to improvements or changes without any prior notice.

1

2

Catalogue

This catalogue refers to prosthetic components compatible with most widely used dental implants. The manufacturing of these components has been achieved through the use of the most sophisticated means of production with CNC devices. The design of the prosthetic components is the result of cooperation of professional designers and clinicians with long-year experience in Implantology. The remarks of the dentists were very useful for the improved design of components. Specific modifications were made after suggestion of the clinicians, aiming for a bet-ter result. More specifically, the following improvements have been integrated in the series of products: 4The transgingival part of the abutments was modified, in concave shape according the latest demands of

the Implantology, to ensure better soft tissue support and emergence profile. 4On the abutments for cement-retained restorations, two flat anti-rotation surfaces were created, to en-

hance the stability of the crown on the abutment. 4The height of the abutments has been increased, to offer adequate mechanical support in cases of re-

sorbed alveolar crest. 4The walls of the abutments have increased thickness to allow more freedom during customization by

milling.4Abutments with increased inclination reaching 23o are available. This inclination has been proved as safe

for clinical use, after mechanical and fatigue tests. The tests were accomplished in ENDOLAB, a certified laboratory (ISO 17025) specialized in implant testing (CE and FDA licence).

Measurements in microscopical level have been achieved with maximum accuracy. All metal parts are fabri-cated from Titanium grade 5. Implant analogs are fabricated from Inox. Plastic castable parts are fabricated from POM (Poly-Oxy-Methylenium) by milling and can be used safely for the burn-out technique without any residual substances.The recommended tightening torque for each abutment is clearly indicated on the package along with other characteristics of the component.

Unique Advantages

The Titanium passive-fit abutments (code numbers 700 and 701) for screw-retained implant restorations, offer the advantages of:4Avoiding tension in the retention screw and possible fracture4Elimination of fit problems and risk of overloading 4Compensation of minimal casting inaccuracies4Fixation of the restoration with one single robust screw4Prevention of bacterial accumulation

The instructions for the use of passive-fit abutments are in p. 27-28

3

Encoding

A few words for the encoding of the prosthetic components that may facilitate the right selection and the correct order of the products. Each serie of products is color-coded, according to the implants to which the components are compatible. The same color coding is followed to the present catalogue. In this way, both the clinician and the dental technician may immediately recognize the compatibility of the components. The products of each serie are further number-coded, according to the specific features of each part. Know-ing the meaning of numbers in each code, it is easy and safe to recognize all the characteristics of each product, even without visual inspection. The code of each component is formed from two, three or four sets of numbers, separated by dots. Each group of numbers is referring to the features of the product. The first two numbers (ex 01) represent the compatibility to specific implants,as mentioned in the follow-ing pages. For example products with code 01 are compatible to XiVE® implants. The tree following numbers indicate the diameter of the components. For example code 340 means diameter 3,4mmThe two following numbers indicate the inclination of the abutment. For example 00 means straight abut-ment and 17 means angled abutment with 17o inclination. The last three numbers indicate the gingival height of the abutment at the lingual site. For example 120 means gingival height (GH) 1,2mm. The above mentioned coding is characteristic for the abutments for cement-retained restorations. All other abutments or components follow the same coding at the first two sets of numbers (indicating compatibility and diameter) and the last set of numbers characterize each product for a specific clinical use.

100 : Fixation screw200 : Implant analog300 : Plastic castable abutment with anti-rotation 301 : Plastic castable abutment without anti-rotation 403: Healing screw with a height of 3 mm405: Healing screw with a height of 5 mm500: Impression post for open and closed tray technique600: Titanium base for zirconium abutment (cad-cam) with anti-rotation601: Titanium base for zirconium abutment (cad-cam) without anti-rotation700: Titanium base with anti-rotation and castable sleeve for screw-retained restorations 701: Titanium base without anti-rotation and castable sleeve for screw-retained restorations 900: PEEK temporary abutment for provisional restorations.

The titanium bases with code numbers 700 and 701 can also be used as abutment for passiv fit.

01

02

03

04

05

06

07

Compatibilitate

4

Example of characteristics and encoding:

17o

Gingival height (GH)

Inclination of the abutment towards the central axis.

2,7 mm

3,4 mm

Compatibila cu implanturile Dentsply - Friadent Frialit / XiVE®

Compatibila cu implanturile Straumann Soft Tissue Level®

Compatibila cu implanturile Biomet 3i Certain®

Compatibila cu implanturile Nobel Biocare Replace®

Compatibila cu implanturile Straumann Bone Level®

Compatibila cu implanturile Mis® Internal Hex

Compatibila cu implanturile Astra Tech®

Compatibila cu implanturile Bredent Medical®

01.340.17.270 01: Titanium abutment compatible with XiVE® implants 340: Abutment diameter 3,4mm 17: Abutment inclination 170

270: Gingival height 2,7mm

Fiecare cod de culoare indica compatibilitatea cu implanturile specifice.

All mentioned brand namesin this catalog are trademarks belonging to their respective companies.

Diameter

Seria

Seria

Seria

Seria

Seria

Seria

Seria

Seria 10

5

01 - SERIA YELLOW Compatibila cu implanturile Dentsply - Friadent Frialit / Xive®

The above brand-name is a registered trademark of the respective company.

01.340.00.120Bont drept cusurub de fixare.Inaltimea gingivala(GH) 1,2 mm.


01.340.00.370Bont drept cusurub de fixare.Inaltimea gingivala (GH) 3,7 mm.

01.340.301Bont calcinabil faraantirotatiepentru lucrari insurubatecu surub.

01.340.300Bont calcinabil cu antirotatie pentru o singuracoroana cu surub.

3,4 mm 3,4 mm 3,4 mm

3,4 mm 3,4 mm 3,4 mm

3,4 mm

3,4 mm 3,4 mm

3,4 mm 3,4 mm 3,4 mm

3,4 mm 3,8 mm3,4 mm

3,4 mm 3,4 mm

01.340.403Surub de cicatrizare.Inaltimea 3 mm

01.340.500Ghid deamprentare pentrulingura inchisa saudeschisa.

01.340.600Baza de titan(cad-cam)cu anti-rotatie, cumansonde plastic si surub.


3,4 mm


01.340.200Implant analog.

01.340.701Baza de titan faraantirotatie,manson calcinabil cudoua suruburi pentrutehnica de turnare

01.340.700Baza de titan cuantirotatie,manson calcinabil cudoua suruburi pentrutehnica de turnare


01.340.17.120Bont angulat 170cusurub de fixare.Inaltimea gingivala (GH) 1,2 mm.



01.340.900Bont provizoriuPEEK pentru lucrariprovizorii cu surub

6

Serie 01: Compatible with Dentspy - Friadent Frialit / XiVE® implants.

3,8 mm 3,8 mm 3,8 mm

3,8 mm 3,8 mm 3,8 mm

3,8 mm

3,8 mm 3,8 mm

3,8 mm 3,8 mm 3,8 mm

3,8 mm 3,8 mm3,8 mm

3,8 mm 3,8 mm

3,8 mm


01.380.17.370Bont angulat 170cusurub de fixare.Inaltimea gingivala(GH) 3,7 mm.




01.380.300Bont calcinabil cuantirotatie pentru o singuracoroana cu surub.


01.380.601Baza de titan(cad-cam)fara anti-rotatie, cumansonde plastic si surub.











7

Σειρά 01: Συμβατή με τα εμφυτεύματα Dentspy - Friadent Frialit / Xive®

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

4,1 mm

Serie 01: Compatible with Dentspy - Friadent Frialit / XiVE® implants




3,8 mm

4,5 mm

4,5 mm


4,5 mm

4,5 mm

4,5 mm

4,5 mm

4,5 mm







4,5 mm

4,5 mm

4,5 mm

4,5 mm

4,5 mm

4,5 mm

01.450.300Bont calcinabil cuantirotatie pentru o singuracoroana cu surub.


4,5 mm

4,5 mm

4,5 mm

4,5 mm






01.450.601Baza de titan(cad-cam)cu anti-rotatie, cu mansonde plastic si surub.

8

Σειρά 01: Συμβατή με τα εμφυτεύματα Dentspy - Friadent Frialit / Xive®.

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

4,1 mm


4,5 mm

4,5 mm

4,5 mm

5,5 mm

5,5 mm


5,5 mm

5,5 mm

5,5 mm

5,5 mm





5,5 mm

5,5 mm

5,5 mm



3,4-5,5 mm

3,4-5,5 mm

3,4-5,5 mm

3,4-5,5 mm

3,4-5,5 mm

01.100Surub de fixare cod:600-601

01.100PSurub de fixare cod:700-701

01.100PLSurub de fixare cod:300-301


Serie 01: Compatible with Dentspy - Friadent Frialit / XiVE® implants.

02 - SERIA ORANGE Seria orange compatibila cu implanturile Straumann Soft Tissue Level®


9

4,8 mm 4,8 mm

4,8 mm 4,8 mm

4,8 mm

4,8 mm 4,8 mm

4,8 mm 4,8 mm

4,8 mm 4,8 mm

4,8 mm 4,8 mm

4,8 mm

4,8 mm

02.480.00Bont drept cu surub de fixare.


02.480.17A*

Bont angulat 170 cusurub de fixare.

02.480.17B*

Bont angulat 170 cusurub de fixare.

02.480.23A*Bont angulat 230 cu surub de fixare.

02.480.23B*Bont angulat 230 cu surub de fixare.

02.480.300Bont calcinabil cuanti rotatie pentru o singura coroana cusurub.

02.480.301Bont calcinabil faraantirotatiepentru lucrari insurubate cu surub.

02.480.403Surub cicatrizare cuinaltimea 3 mm

02.480.405Surub cicatrizare cuinaltimea 5 mm

02.480.500Ghid de amprentarepentrulingura inchisa saudeschisa.

4,8 mm

02.480.601Baza de titan(cad-cam) fara anti-rotatie, cu manson de plastic si surub.




4,8 mm

02.650.00Bont drept cusurub de fixare.

6,5 mm

02.650.17A*Bont angulat 170 cu surubde fixare.

6,5 mm

02.480.600Baza de titan(cad-cam) cuanti-rotatie, cu manson de plastic si surub.

10


02.650.701Baza de titan faraantirotatie,manson calcinabil cudoua suruburi pentrutehnica de turnaretwo screws.

6,5 mm

6,5 mm

6,5 mm

4,8 -6,5 mm

4,8 -6,5 mm

4,8 -6,5 mm

4,8 -6,5 mm

4,8 -6,5 mm

4,8 -6,5 mm

4,8 mm

4,8 mm

4,8 mm

4,8 -6,5 mm

6,5 mm

6,5 mm

6,5 mm

Seria 02: Compatibila cu implanturile Straumann - Soft Tissue Level®

02.650.17B*Bont angulat 170 cu surubde fixare.

02.100INSurub de fixare cod:600-601


02.100PLSurub de fixare cod: 300- 301

02.100Surub de fixare

11

03 - SERIA GREEN Seria green compatibla cu implanturile Biomet 3i Certain®


03.340.00.120Bont drept cu surub de fixare.Inaltimea gingivala (GH) 1,2 mm.

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm



03.340.17.120Bont angulat 170 cu surub de fixare.Inaltimea gingivala (GH) 1,2 mm.

03.340.17.270Bont angulat 170 cu surub de fixare. Inaltimea gingivala (GH) 2,7 mm.


03.340.23.120Bont angulat 230

cu surub de fixare. Inaltimea gingivala (GH) 1,2 mm.

03.340.23.270Bont angulat 230 cu surub de fixare. Inaltimea gingivala(GH) 2,7 mm.


03.340.300Bont calcinabil cuantirotatie pentru o singura coroana cusurub.


03.340.403Surub de cicatrizare inaltimea 3 mm

03.340.405Surub de cicatrizare cu inaltimea de 5 mm



Serie 02: Compatible with Straumann - Soft Tissue Level® implants




12

Seria 03: Compatibila cu implanturile Biomet 3i Certain®

4,1 mm

3,4 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm

4,1 mm













3,4 mm


03.410.300Bont calcinabil cuantirotatie pentru o singura coroana cu surub.


03.410.403Surub de cicatrizare cu inaltimea de3mm

03.410.405Surub de cicatrizare cu inaltimea de 5 mm


13

Serie 03: Compatible with Biomet 3i Certain® implants Seria 03: Compatibila cu implanturile Biomet 3i Certain®

4,1 mm

4,1 mm

4,1 mm

4,1 mm

5,0 mm

5,0 mm

5,0 mm

5,0 mm

5,0 mm

5,0 mm

5,0 mm

5,0 mm

5,0 mm

5,0 mm

5,0 mm




5,0 mm

5,0 mm

5,0 mm
















14

Σειρά 01: Συμβατή με τα εμφυτεύματα Dentspy - Friadent Frialit / Xive®.

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

3,4 mm

4,1 mm

Seria 03: Compatibila cu implanturile Biomet 3i Certain®

4,1 mm

5,0 mm

5,0 mm

3,4-5,0 mm

3,4-5,0 mm

3,4-5,0 mm

3,4-5,0 mm

3,4-5,0 mm

5,0 mm

14

03.100Surub de fixare cod:600-601


03.100PLSurub de fixare cod:300-301



15

Κατάλογος 2012

15

3,5 mm 3,5 mm 3,5 mm

3,5 mm 3,5 mm 3,5 mm

3,5 mm 3,5 mm 3,5 mm

3,5 mm 3,5 mm 3,5 mm

3,5 mm 3,5 mm 3,5 mm

3,5 mm 3,5 mm 4,3 mm

04 - SERIA BLUE Seria blue compatibila cu implanturile Nobel Biocare Replace®









04.350.601Baza de titan(cad-cam)fara anti-rotatie,cu mansonde plastic si surub.


04.350.701Baza de titan faraantirotatie,manson calcinabil cudoua suruburi pentrutehnica de turnare .


04.350.00.370Bont drept cusurub de fixare.Inaltimea gingivala

(GH) 3,7 mm.



04.350.403Surub de cicatrizare cu inaltimea 3 mm




16

Seria 04: Compatibila cu implanturile Nobel Biocare Replace®

4,3 mm 4,3 mm 4,3 mm

4,3 mm 4,3 mm

4,3 mm 4,3 mm

4,3 mm 4,3 mm

4,3 mm 4,3 mm

4,3 mm 4,3 mm

04.430.700Baza de titan cu antirotatie,manson calcinabil cudoua suruburi pentrutehnica de turnare



04.500.00.270Bont drept cusurub de fixare.Inaltimeagingivala(GH) 2,7 mm.

4,3 mm

4,3 mm

4,3 mm

5,0 mm

5,0 mm




04.430.00.370Bont drept cusurub de fixare.Inaltimeagingivala(GH) 3,7 mm.

04.430.17.120Bont angulat 170 cu surubde fixare.Inaltimea gingivala (GH) 1,2 mm.




04.430.403Surub de cicatrizare cuinaltimea de 3 mm

04.430.405Surub de cicatrizare cuinaltimea de 5 mm



04.430.601Titanium base for zirconium abutment (cad-cam) without anti-rotation, plastic sleeve and screw.


1717

04.500.601Baza de titan(cad-cam) fara anti-rotatie, cu mansonde plastic si surub.

04.430/500.100Surub de fixare cu diametrul 4,3mm si 5,0mm cod: 300-301, 600-601

5,0 mm 5,0 mm 5,0 mm

5,0 mm 5,0 mm

5,0 mm 5,0 mm

5,0 mm 5,0 mm

5,0 mm 5,0 mm

5,0 mm 5,0 mm

04.500.17.120Bont angulat 170 cu surub de fixare.Inaltime gingivala (GH) 1,2 mm.

5,0 mm

3,5 mm

3,5 mm

4,3-5,0 mm



Seria 04: Compatibila cu implanturile Nobel Biocare Replace®





04.500.300Bont calcinabil cu anti rotatie pentru o singura coroana cu surub.

04.500.301Bont calcinabil faraantirotatiepentru lucrari insurubate cusurub.

04.500.403Surub decicatrizare.Inaltimea 3 mm

04.500.405Surub decicatrizare.Inaltimea 5 mm


04.500.600Baza de titan(cad-cam) cu anti-rotatie, cu mansonde plastic si surub.

04.350.100Surub de fixare cod:300-301, 600-601

04.350.100PSurub de fixare cod:700-701

04.430/500.100PSurub de fixare cu diametrul 4,3mm si 5,0mm cod: 700-701

4,3-5,0 mm

18

05 - SERIA RED Seria red compatibila cu implanturile Straumann Bone Level®


3,3 mm 3,3 mm

3,3 mm 3,3 mm

3,3 mm 3,3 mm

3,3 mm 3,3 mm 4,1 mm

3,3 mm 3,3 mm 4,1 mm

3,3 mm 4,1 mm

05.330.00.120Bont drept cu surub de fixare. Inaltimea gingivala (GH) 1,2 mm.









3,3 mm

3,3 mm

3,3 mm





05.330.701Baza de titan faraantirotatie,manson calcinabil cudoua suruburi pentrutehnicade turnare

4,1 mm





05.100PSurub de fixare code700-701

Seria 05: Compatibila cu implanturile Straumann Bone Level®

19

4,1 mm

4,1 mm

4,1 mm



4,1 mm

4,1 mm



4,1 mm

4,1 mm

4,1 mm

4,1 mm

3,3-4,1 mm



05.410.600Baza de titan(cad-cam)fara anti-rotatie, faramansonde plastic si surub.


05.100Surub de fixare code600-601

3,3-4,1 mm


20

06 - SERIA PURPLE Seria purple compatibila cu implanturile MIS® Internal Hex


3,75 / 4,2 mm

06.375.00.120Bont drept cu surub de fixare. Inaltime gingivala (GH) 1,2 mm.


06.375.17.120Bont angulat 170 cu surubde fixare. Inaltimea gingivala (GH) 1,2 mm.

06.375.17.270Bont angulat 170 cusurub de fixare.Inaltimea gingivala(GH) 2,7 mm.

06.375.17.370Bont angulat 170 cusurub de fixare.Inaltimea gingivala (GH) 3,7 mm.

3,75 / 4,2 mm 3,75 / 4,2 mm

3,75 / 4,2 mm 3,75 / 4,2 mm

3,75 / 4,2 mm 3,75 / 4,2 mm

3,75 / 4,2 mm 3,75 / 4,2 mm 3,75 / 4,2 mm

3,75 / 4,2 mm 3,75 / 4,2 mm 3,75 / 4,2 mm

3,75 / 4,2 mm 3,75 / 4,2 mm 3,75 / 4,2 mm



06.375.23.270Bont angulat 230 cu surub de fixare.Inaltimea gingivala(GH) 2,7 mm.




06.375.403Surub de cicatrizare cuinaltimea 3 mm


3,75 / 4,2 mm

3,75 / 4,2 mm







21

3,75 / 4,2 mm 5 / 6 mm

3,75 / 4,2 mm 5 / 6 mm

5 / 6 mm 5 / 6 mm

5 / 6 mm 5 / 6 mm

5 / 6 mm 5 / 6 mm

5 / 6 mm 5 / 6 mm

Seria 06: Compatibila cu implanturile MIS® Internal Hex







5 / 6 mm

3,75 / 4,2 mm

3,75 / 4,2 mm

5 / 6 mm

5 / 6 mm

5 / 6 mm

06.375.900Bont provizoriu PEEKpentru lucrari provizorii cusurub

06.450.00.120Bont drept cusurub de fixare. Inaltime gingivala(GH) 1,2 mm.

06.450.00.270Bont drept cusurub de fixare. Inaltime gingivala(GH) 2,7 mm.





06.450.500Ghid de amprentarepentru lingura inchisasau deschisa.




22

5 / 6 mm 5 / 6 mm 5 / 6 mm

5 / 6 mm 5 / 6 mm

3,75 / 4,2 mm 3,75 / 4,2 mm

3,75 / 4,2 mm 3,75 / 4,2 mm 3,75 / 4,2 mm

3,75 / 4,2 mm 3,75 / 4,2 mm 3,75 / 4,2 mm

3,75 / 4,2 mm 3,75 / 4,2 mm 5 / 6 mm

3,75 / 4,2 mm

3,75 / 4,2 mm

Seria 06: Compatibila cu implanturile MIS® Internal Hex


06.450.601Baza de titan(cad-cam)fara anti-rotatie,cu mansonde plastic si surub.


06.100Surub fixare cod:300-301 & 600-601

06.100PSurub fixare cod:700-701

23

Series 06: Compatible with implants MIS®

07 - SERIA CYAN Seria cyan compatibila cu implanturile Astra Tech®


3,5 / 4,0 mm 3,5 / 4,0 mm 3,5 / 4,0 mm

3,5 / 4,0 mm 3,5 / 4,0 mm 3,5 / 4,0 mm

3,5 / 4,0 mm 3,5 / 4,0 mm 3,5 / 4,0 mm

3,5 / 4,0 mm 3,5 / 4,0 mm 3,5 / 4,0 mm

3,5 / 4,0 mm 3,5 / 4,0 mm 3,5 / 4,0 mm

3,5 / 4,0 mm 3,5 / 4,0 mm 3,5 / 4,0 mm

07.350.00.120ABont drept cu surub de fixare. Pentru dintele anterior .Inaltimea gingivala (GH) 1,2 mm.

07.350.17.120BBont angulat 170 cu surub de fixare. Pentru dintele posterior. Inaltimea gingivala (GH) 1,2 mm.

07.350.00.120BBont drept cu surub de fixare. Pentru dintele posterior .Inaltimea gingivala (GH) 1,2 mm.

07.350.00.270ABont drept cu surub de fixare. Pentru dintele anterior .Inaltimea gingivala (GH) 2,7 mm

07.350.00.270BBont drept cu surub de fixare. Pentru dintele posterior .Inaltimea gingivala (GH) 2,7 mm.

07.350.17.120AAngled abutment 170 with fixation screw. For anterior teeth. Gingival height (GH) 1,2 mm.

07.350.17.270ABont angulat 170 cu surub de fixare. Pentru dintele anterior.Inaltimea gingivala(GH) 2,7 mm.

07.350.17.270BBont angulat 170 cu surub de fixare. Pentru dintele posterior.Inaltimea gingivala (GH) 2,7 mm.

07.350.23.120ABont angulat 230 cu surub de fixare. Pentru dintele anterior.Inaltimea gingivala (GH) 1,2 mm.


07.350.23.270ABont angulat 230 cu surub de fixare. Pentru dintele anterior.Inaltimea gingivala (GH) 2,7 mm.




07.350.403Surub cicatrizare cu inaltimea 3 mm




24

Seria 07: Compatibila cu implanturile Astra Tech®

3,5 / 4,0 mm 4,5 / 5,0 mm 4,5 / 5,0 mm

3,5 / 4,0 mm 4,5 / 5,0 mm 4,5 / 5,0 mm

3,5 / 4,0 mm 4,5 / 5,0 mm 4,5 / 5,0 mm

3,5 / 4,0 mm 4,5 / 5,0 mm 4,5 / 5,0 mm

4,5 / 5,0 mm 4,5 / 5,0 mm

4,5 / 5,0 mm 4,5 / 5,0 mm


07.450.00.270Bont drept cu surub de fixare. Inaltimea gingivala(GH) 2,7 mm.

07.450.17.120Bont angulat 170 cu surub de fixare.Inaltimea gingivala (GH) 1,2 mm








07.450.405Surub cicatrizare cu inaltimea de 5 mm



4,5 / 5,0 mm

4,5 / 5,0 mm

07.350.600Baza de titan(cad-cam) cuanti-rotatie, cu mansonde plastic si surub.


07.450.600Baza de titan(cad-cam) cuanti-rotatie, cu mansonde plastic si surub.



25

07.350.100PSurub fixare cod: 700-701

3,5 mm 4,5 mm 3,5 mm

4,5 mm 3,5 mm 4,5 mm

3,5 mm 4,0 mm 4,0 mm

3,5 mm 4,0 mm 4,0 mm

4,5 / 5,0 mm 4,0 mm

4,5 / 5,0 mm 4,0 mm

4,5 / 5,0 mm

4,5 / 5,0 mm

07.350.100Surub fixare cod: 300-301 & 600-601

Seria 07: Compatibila cu implanturile Astra Tech®

07.450.100Surub fixare cod: 300-301 & 600-601

07.450.100PSurub fixare cod: 700-701

26

10 - SKYBLUE SERIEThe skyblue serie of prosthetic components is compatible with Bredent Medical® implants


4,0 mm 4,0 mm 4,0 mm

4,0 mm 4,0 mm 4,0 mm

4,0 mm 4,0 mm 4,0 mm

4,0 mm 4,0 mm 4,0 mm

4,0 mm 4,0 mm

4,5 / 5,0 mm 4,0 mm

4,5 / 5,0 mm

4,5 / 5,0 mm


10.400.00.250Bont drept cu surub de fixare. Inaltimea gingivala(GH) 2,5 mm.


10.400.17.150R*Bont angulat 170

cu surub de fixare.Inaltimea gingivala

(GH) 1,5 mm.

10.400.17.150*Bont angulat 170

cu surub de fixare.Inaltimea gingivala (GH) 1,5 mm.

10.400.17.250R*Bont angulat 170


10.400.17.250*Bont angulat 170


10.400.17.350R*Bont angulat 170

cu surub de fixare.Inaltimea gingivala

(GH) 3,5 mm.

10.400.17.350*Bont angulat 170


10.100Surub fixare.



10.400.600Baza de titan(cad-cam) cuanti-rotatie, cu manson de plastic si surub.


27

Instructions for the use of passive-fit abutments (codes 700-701)

1. After the completion of the firing cycles of the ceramic material, the titanium passive fit adapter is screwed onto the lab analog with the brass luting screw. In case of more than one implant it is recommended to use in one implant the final screw.

2. Slightly sandblast the surface of the titanium passive fit adapter except for the transgingival polished part, as well as the contact surface of the crown with the passive adapter and Isolate with wax the surface to be luted from the transgingival collar in order to prevent the cement of flowing on the polished surface.

3. Use a small amount of vaseline on the screw and in the screw channel to avoid the gluing of the screw.

4. Apply small amount of Ceka Site or similar resin cement on the upper surface of the titanium passive fit adapter. Note: Be careful not to apply cement onto the screw. Use limited amount of cement to avoid extruding of the cement upwards through the screw channel.

28

We support thedental world

Prosthetic components compatible with most widely used dental implants

Novamind PC, 31 Fokidos Str., 11527 AthensTel.: +30 210 5233 307


5. Screw one final screw in case of more than one implant. In case of a single implant, firmly hold the restoration until the cement is stabilized.

6. Remove the excess, and replace the brass luting screws with the final titanium screws, until the cement is completely set.

7. After the cement is completely set, remove the screws and check the passive fit and polish all the surfaces in a conventional manner.

8. Restoration complete with a perfect passive fit..

29

We support thedental world

Prosthetic components compatible with most widely used dental implants

Novamind PC, 31 Fokidos Str., 11527 AthensTel.: +30 210 5233 307


After 35 years in marketing and sales of dental products of the largest international brands,

we established a modern production unit for compatible dental abutments and connecting screws

under the brand name Novamind.

NOVAMIND PC, 31 FOKIDOS STR. GR-11527 ATHENS - ΤEL.: +30 210 5233 307www.novamind.gr - email: [email protected]

Date post:	03-Nov-2019
Category:	Documents
Upload:	others
View:	12 times
Download:	0 times

Catalog - Sisdentsisdent.ro/wp-content/uploads/2016/07/novamindenRO.pdf · Catalog Componente...

Documents