www.ddg-scanlab.com
Catalog 2013
DDG-ComponentsHQ Implant Components
Nobel Biocare® Replace Select® DDG-1100 Pag
Np DDG-1101 11-13
Rp DDG-1102 15-17
Wp DDG-1103 19-21
AstraTech® Osseospeed® DDG-1200
3.0 DDG-1201 23
3.5/4.0 DDG-1202 25-27
4.5/5.0 DDG-1203 29-31
Conic 20º DDG-1204 25-31
Conic 45º DDG-1205 25-31
Klockner® Essential® DDG-1300
4.5 DDG-1301 33
6.0 DDG-1302 35
Nobel Biocare® Bränemark® DDG-2100
Np DDG-2101 37
Rp DDG-2102 39-41
Wp DDG-2103 43
Dentsply® Friadent Xive® DDG-2200
3.4 DDG-2201 45
3.8 DDG-2202 47
4.5 DDG-2203 49
5.5 DDG-2204 51
BTI® Internal® DDG-2300
4.1 DDG-2301 53
5.5 DDG-2302 55
Nobel Biocare® Active® DDG-3100
Np DDG-3101 57
Rp DDG-3102 59
DDG-ComponentsHQ Implant Components
Index
Zimmer® Tapered Screw Vent® DDG-3200 Pag
3.7 DDG-3201 63-65
4.5 DDG-3202 65
5.7 DDG-3203 67
Biocomp® DDG-3300
DDG-3301 69
DDG-3302 71
Nobel Biocare® MultiUnit® DDG-4100
Rp DDG-4101 73
Wp DDG-4102 75
BTI EXTERNAL® DDG-4200
3.5 DDG-4201 77
4.1 DDG-4202 79-81
5.5 DDG-4203 83
Microdent® DDG-4300
3.5 DDG-4301 85
4.2 DDG-4301 87
5.1 DDG-4301 89
Biomet 3i® Certain® DDG-5100
3.4 DDG-5101 91-93
4.1 DDG-5102 95-97
5.0 DDG-5103 99-101
Klockner® SK2® DDG-5200
4.3 DDG-5201 103
Osstem® GS System® DDG-5300
Mini DDG-5301 105
Regular DDG-5302 107
DDG-ComponentsHQ Implant Components
Index
Biomet 3i® Osseotite® DDG-6100 Pag
3.4 DDG-6101 109
4.1 DDG-6102 111-113
5.0 DDG-6103 115
Implant Direct® Bar abutment® DDG-6200
4.2 DDG-6201 117
Straumann® Tissue Level® DDG-7100
3.5 DDG-7101 119
4.8 Implant Level DDG-7102 121-123
4.8 SynOcta DDG-7103 125
6.0 DDG-7104 127
6.0 SynOcta DDG-7105 129
Camlog® Screw Line® DDG-7200
3.3 DDG-7201 131
3.8 DDG-7202 133
4.3 DDG-7203 135
5.0 DDG-7204 137
6.0 DDG-7205 139
Bar Abutment DDG-7206 141
Straumann® Bone Level® DDG-8100
3.3 DDG-8101 143
4.1 DDG-8102 145-147
Dentsply Friadent® Ankylos® DDG-8200
Implant Level Non Engaging DDG-8201 149
Abutment Level DDG-8202 151
DDG-ComponentsHQ Implant Components
Index
DDG-ComponentsHQ Implant Components
Biohorizons® Internal® DDG-9100 Pag
3.5 DDG-9101 153
4.5 DDG-9102 155
5.7 DDG-9103 157
Osstem® TS System® DDG-9200
Mini DDG-9201 159
Regular DDG-9202 161
Index
Nobel Biocare Replace Select® 3.5 (Ref.DDG-1101) Part. 1
DDG-1100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
11www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Screw
Engagingcastable abutment
Titanium engagingInterface
Titanium Impressioncoping Open Tray
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Titanium Healingabutment
Straight titanium abutment
Titanium Non engaging Interface
Titanium Impressioncoping ClosedTray
Ref. DDG-110101
Ref. DDG-110125
Ref. DDG-110180
Ref. DDG-110111
Ref. DDG-110131
Ref. DDG-110170
Ref. DDG-110110
Ref. DDG-110126
Ref. DDG-110151
Ref. DDG-110121
Ref. DDG-110130
Ref. DDG-110171
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For fixation of the restoration. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Open Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • DDG-110151-3mm• DDG-110152-5mm• DDG-110153-7mm• Made in Titanium 5 grade.
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Closed Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Nobel Biocare Replace Select® 3.5 (Ref.DDG-1101) Part. 2
DDG-1100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
13www.ddg-scanlab.com
Scanbody InterfacesNon engaging
Scanbody InterfacesEngaging (IntraOral)
ScanBody DirectEngaging
Ref. DDG-110140Ref. DDG-110141 Ref. DDG-110143
Technical SpecificationsTechnical Specifications Technical Specifications
• For scan Implant position. • Non engaging.• High Accuracy• For use in Laboratory and IntraOral.• Implant Level• Compatible for all Cad system.• Not necessary spray.(90% of cases).
• For scan Implant position. • Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For scan Implant position. • High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Nobel Biocare Replace Select® 4.3 (Ref.DDG-1102) Part. 1
DDG-1100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
15www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Screw
Engagingcastable abutment
Titanium engagingInterface
Titanium Impressioncoping Open Tray
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Titanium Healingabutment
Straight titanium abutment
Titanium Non engaging Interface
Titanium Impressioncoping ClosedTray
Ref. DDG-110201
Ref. DDG-110225
Ref. DDG-110280
Ref. DDG-110211
Ref. DDG-110231
Ref. DDG-110270
Ref. DDG-110210
Ref. DDG-110226
Ref. DDG-110251
Ref. DDG-110221
Ref. DDG-110230
Ref. DDG-110271
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For fixation of the restoration. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Open Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • DDG-110251-3mm• DDG-110252-5mm• Made in Titanium 5 grade.
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Closed Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Nobel Biocare Replace Select® 4.3 (Ref.DDG-1102) Part. 2
DDG-1100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
17www.ddg-scanlab.com
Scanbody InterfacesNon engaging
Scanbody InterfacesEngaging (IntraOral)
ScanBody DirectEngaging
Ref. DDG-110240Ref. DDG-110241 Ref. DDG-110243
Technical SpecificationsTechnical Specifications Technical Specifications
• For scan Implant position. • Non engaging.• High Accuracy• For use in Laboratory and IntraOral.• Implant Level• Compatible for all Cad system.• Not necessary spray.(90% of cases).
• For scan Implant position. • Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For scan Implant position. • High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Nobel Biocare Replace Select® 5.0 (Ref.DDG-1103) Part. 1
DDG-1100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
19www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Screw
Engagingcastable abutment
Titanium engagingInterface
Titanium Impressioncoping Open Tray
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Titanium Healingabutment
Straight titanium abutment
Titanium Non engaging Interface
Titanium Impressioncoping ClosedTray
Ref. DDG-110301
Ref. DDG-110325
Ref. DDG-110380
Ref. DDG-110311
Ref. DDG-110331
Ref. DDG-110370
Ref. DDG-110310
Ref. DDG-110326
Ref. DDG-110351
Ref. DDG-110321
Ref. DDG-110330
Ref. DDG-110371
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For fixation of the restoration. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Open Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • DDG-110351-3mm• DDG-110352-5mm• Made in Titanium 5 grade.
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Closed Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Nobel Biocare Replace Select® 5.0 (Ref.DDG-1103) Part. 2
DDG-1100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
21www.ddg-scanlab.com
Scanbody InterfacesNon engaging
Scanbody InterfacesEngaging (IntraOral)
ScanBody DirectEngaging
Ref. DDG-110340Ref. DDG-110341 Ref. DDG-110343
Technical SpecificationsTechnical Specifications Technical Specifications
• For scan Implant position. • Non engaging.• High Accuracy• For use in Laboratory and IntraOral.• Implant Level• Compatible for all Cad system.• Not necessary spray.(90% of cases).
• For scan Implant position. • Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For scan Implant position. • High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
AstraTech® Osseospeed Tx® 3.0 (Ref.DDG-1201)
DDG-1200 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t sD D G - C o m p o n e n t s
23www.ddg-scanlab.com
Titanium engagingInterface
Screw
Engagingcastable abutment
Scanbody InterfacesNon engaging
Titanium Non engaging Interface
Scanbody InterfacesEngaging (IntraOral)
Screw
ScanBody DirectEngaging
Ref. DDG-120101
Ref. DDG-120125
Ref. DDG-120111
Ref. DDG-120131
Ref. DDG-120110
Ref. DDG-120126
Ref. DDG-120183
Ref. DDG-120130
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade..
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.• Nostius non tem per-timu.• Videorterur, nitus con-tilius • Hemore abenius, nius.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized. .
• For scan Implant position. Titanium.• Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
AstraTech® Osseospeed Tx® 3.5/4.0 (Ref.DDG-1202) Part. 1
DDG-1200 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Scanbody InterfacesEngaging (IntraOral)
ScanBody DirectEngaging
Ref. DDG-120241
Technical Specifications
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
25www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Titanium HealingCap
Engagingcastable abutment
Titanium engagingInterface
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Straight Titaniumabutment
Screw
Titanium Non engaging Interface
Ref. DDG-120201
Ref. DDG-120225
Ref. DDG-120250
Ref. DDG-120211
Ref. DDG-120231
Ref. DDG-120210
Ref. DDG-120226
Ref. DDG-120221
Ref. DDG-120220
Ref. DDG-120230
Ref. DDG-120240
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • DDG-120250-2mm• DDG-120252-4mm• DDG-120254-6mm• DDG-120256-8mm• DDG-120257-10mm• Made in Titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Scanbody InterfacesNon engaging
AstraTech® Osseospeed Tx® 3.5/4.0 (Ref.DDG-1202) Part. 2
DDG-1200 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t sD D G - C o m p o n e n t s
27www.ddg-scanlab.com
AnalogConic 20º
ScanBody DirectEngaging Conic 20º
Non engagingcastable abutment 20º
Scanbody DirectNon engaging
Titaniumabutmant conic 20º
ScanBody DirectEngaging Conic 45º
Screwfor abutment 20º
ScanBody DirectEngaging
Ref. DDG-120202
Ref. DDG-120443
Ref. DDG-120218
Ref. DDG-120242
Ref. DDG-120206
Ref. DDG-120543
Ref. DDG-120221
Ref. DDG-120243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
•For screw-cement reteined restorations. • Engaging• For Conic abutment 20º.• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade..
• For scan Implant position. Titanium.• For Conic abutment 20º. • High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.
• Cast component.• Engaging. • For create Bridge.• For Conic abutment 20º. • Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
•For screw-reteined restorations. • Non engaging.• DDG-120206-0.5mm.• DDG-120207-1mm• DDG-120208-2mm• DDG-120209-4mm• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• For Conic abutment 45º. • High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.
• For fixation of the restoration.• For Conic abutment 20º. • High Quality.• High Strength.• Made in titanium 5 grade.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
AstraTech® Osseospeed Tx® 4.5/5.0 (Ref.DDG-1203) Part 1
DDG-1200 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Scanbody InterfacesEngaging (IntraOral)
ScanBody DirectEngaging
Ref. DDG-120341
Technical Specifications
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
29www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Titanium HealingCap
Engagingcastable abutment
Titanium engagingInterface
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Straight Titaniumabutment
Screw
Titanium Non engaging Interface
Ref. DDG-120301
Ref. DDG-120325
Ref. DDG-120350
Ref. DDG-120311
Ref. DDG-120331
Ref. DDG-120310
Ref. DDG-120326
Ref. DDG-120321
Ref. DDG-120320
Ref. DDG-120330
Ref. DDG-120340
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • DDG-120350-2mm• DDG-120352-4mm• DDG-120354-6mm• DDG-120356-8mm• DDG-120356-8mm• Made in Titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
ScanBody DirectNon Engaging
AstraTech® Osseospeed Tx® 4.5/5.0 (Ref.DDG-1203) Part 2
DDG-1200 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t sD D G - C o m p o n e n t s
31www.ddg-scanlab.com
AnalogConic 20º
ScanBody DirectEngaging Conic 20º
Non engagingcastable abutment 20º
Scanbody Non engaging
Titaniumabutmant conic 20º
ScanBody DirectEngaging Conic 45º
Screwfor abutment 20º
ScanBody DirectEngaging
Ref. DDG-120202
Ref. DDG-120443
Ref. DDG-120311
Ref. DDG-120334
Ref. DDG-120306
Ref. DDG-120543
Ref. DDG-120321
Ref. DDG-120343
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade..
• For scan Implant position. Titanium.• For Conic abutment 20º. • High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.
• Cast component.• Non engaging. • For create Bridge.• For Conic abutment 20º. • Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
•For screw-reteined restorations. • Non engaging.• DDG-120306-0.5mm• DDG-120307-1mm• DDG-120308-2mm• DDG-120309-4mm• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• For Conic abutment 45º. • High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.
• For fixation of the restoration.• For Conic abutment 20º. • High Quality.• High Strength.• Made in titanium 5 grade.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Klockner® Essential 4.5 (Ref.DDG-1301)
DDG-1300 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t sD D G - C o m p o n e n t s
33www.ddg-scanlab.com
Screw
Titanium Non engaging Interface
Engagingcastable abutment
Scanbody InterfacesNon engaging
Non Engagingcastable abutment
Scanbody InterfacesEngaging (IntraOral)
Titanium Engaging Interface
ScanBody DirectEngaging
Ref. DDG-130180
Ref. DDG-130130
Ref. DDG-130111
Ref. DDG-130140
Ref. DDG-1130110
Ref. DDG-130141
Ref. DDG-130131
Ref. DDG-130143
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.(90% of cases).
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Non engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).(90% of cases).
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Analog
Ref. DDG-130101
Technical Specifications
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade..
D D G - C o m p o n e n t s
Klockner® Essential 6.0 (Ref.DDG-1302)
DDG-1300 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t sD D G - C o m p o n e n t s
35www.ddg-scanlab.com
Screw
Titanium Non engaging Interface
Engagingcastable abutment
Scanbody InterfacesNon engaging
Non Engagingcastable abutment
Scanbody InterfacesEngaging (IntraOral)
Titanium Engaging Interface
ScanBody DirectEngaging
Ref. DDG-130280
Ref. DDG-130230
Ref. DDG-130211
Ref. DDG-130240
Ref. DDG-130210
Ref. DDG-130241
Ref. DDG-130231
Ref. DDG-130243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.(90% of cases).
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Non engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).(90% of cases).
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Analog
Ref. DDG-130201
Technical Specifications
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade..
D D G - C o m p o n e n t s
Nobel Biocare® Bränemark® 3.3 (Ref.DDG-2101)
DDG-2100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
37www.ddg-scanlab.com
Straight Zrabutment 1 mm
Screw
Non Engagingcastable abutment
Titanium engagingInterface
ScanBody InterfacesNon engaging
Analog
Straight Zrabutment 2 mm
Scanbody InterfacesEngaging (IntraOral)
Engagingcastable abutment
Titanium Non engaging Interface
ScanBody DirectEngaging
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.
• Interfaces Anodized.
• For fixation of the restoration. • High Quality.• High Strength.• Made in titanium 5
grade.
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.
• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. • Non engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.
• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.
• Interfaces Anodized.
• For scan Implant position. • Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.
(90% of cases).
D D G - C o m p o n e n t s
Ref. DDG-210120
Ref. DDG-210180
Ref. DDG-210110
Ref. DDG-210131
Ref. DDG-210140
Ref. DDG-210101
Ref. DDG-210121
Ref. DDG-210111
Ref. DDG-210130
Ref. DDG-210143Ref. DDG-210141
Nobel Biocare® Bränemark® 4.1 (Ref.DDG-2102) Part. 1
DDG-2100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
39www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Straight Titaniumabutment Engaging
Engagingcastable abutment
Titanium engagingInterface
Cr-Co Base EngagingCastable abutment
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Straight Titaniumabutment Non Engaging
Locator abutment
Titanium Non engaging Interface
Cr-Co Base Non engagingCastable abutment
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.
• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.
• Interfaces Anodized.
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5
grade.
• Cast component.• Engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Cast-On component.• Engaging. • For create a Crown (Screw retened) and Bridge (cemented).• Base Cr-Co.• High Quality.• High Strength.• Cnc Machined.• Made in Delrin Plastic and Cr-Co.
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.
• Made in Delrin Plastic.
• For cemented resto-rations. Non engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.
• Interfaces Anodized.
• Used for bridge abut-ment and crown.• Non engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• Abutment for Overdentadures. • High accuracy.• High Quality..• Made in Titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Cast-On component.• Engaging. • For create a Crown (Screw retened) and Bridge (cemented).• Base Cr-Co.• High Quality.• High Strength.• Cnc Machined.• Made in Delrin Plastic
and Cr-Co.
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Ref. DDG-210225
Ref. DDG-210221
Ref. DDG-210211
Ref. DDG-210231
Ref. DDG-210213
Ref. DDG-210210
Ref. DDG-210226
Ref. DDG-210260
Ref. DDG-210230
Ref. DDG-210212Ref. DDG-210220
Ref. DDG-210201
Nobel Biocare Bränemark® 4.1 (Ref.DDG-2102) Part. 2
DDG-2100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
41www.ddg-scanlab.com
Angled titaniumabutment 15º
Screw UnigripDrive Flat seat
Scanbody InterfacesEngaging (IntraOral)
Screw
Titanium Impressioncoping OpenTray
ScanBody DirectNon engaging
Angled titaniumabutment 25º
Titanium Healingabutment
Titanium Healingabutment
Screw
Titanium Impressioncoping ClosedTray
ScanBody DirectEngaging
Ref. DDG-210221
Ref. DDG-210282
Ref. DDG-210241
Ref. DDG-210280
Ref. DDG-210270
Ref. DDG-210242
Ref. DDG-210224
Ref. DDG-210250
Ref. DDG-210240
Ref. DDG-210281
Ref. DDG-210271
Ref. DDG-210243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Used for bridge abut-ment and crown.• Angled 15º.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• For fixation of the restoration.• Flat seat. • High Quality.• High Strength.• Made in titanium 5 grade.
• For scan Implant position. • Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For fixation of the restoration.• Unigrip screwdriver. • High Quality.• High Strength.• Made in titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Open Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy• Non engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
• Used for bridge abut-ment and crown.• Angled 25º.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • DDG-210250-2mm• DDG-210251-3mm• DDG-210252-4mm• DDG-210253-5mm• Made in Titanium 5 grade.
• For scan Implant position. • Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For fixation of the restoration. • Low profile.• 1.2 Hex.• High Quality.• High Strength.• Made in titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Closed Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Nobel Biocare Bränemark® 5.1 (Ref.DDG-2103)
DDG-2100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
43www.ddg-scanlab.com
Screw Non engagingcastable abutment
Engagingcastable abutment
Titanium Non engaging Interface
ScanBody DirectEngaging
Ref. DDG-210380 Ref. DDG-210311Ref. DDG-210310
Ref. DDG-210301
Ref. DDG-210343
Technical Specifications Technical SpecificationsTechnical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• Cast component.• Engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For scan Implant position. • High Accuracy• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
Dentsply Friadent® Xive® 3.4 (Ref.DDG-2201)
DDG-2200 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
Scanbody InterfacesNon engaging
ScanBody DirectEngaging
Ref. DDG-220140
Technical Specifications
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
45www.ddg-scanlab.com
Screw
Engagongcastable abutment
Scanbody InterfacesEngaging (IntraOral)
Non engagongcastable abutment
Ref. DDG-220183
Ref. DDG-220111
Ref. DDG-220141
Ref. DDG-220110
Ref. DDG-220143
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
ScanBody Direct Engaging
Analog
Ref. DDG-2201101
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
D D G - C o m p o n e n t s
Dentsply Friadent® Xive® 3.8 (Ref.DDG-2202)
DDG-2200 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
Scanbody InterfacesNon engaging
ScanBody DirectEngaging
Ref. DDG-220240
Technical Specifications
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
47www.ddg-scanlab.com
Screw
Engagongcastable abutment
Scanbody InterfacesEngaging (IntraOral)
Non engagongcastable abutment
Ref. DDG-220283
Ref. DDG-220211
Ref. DDG-220241
Ref. DDG-220210
Ref. DDG-220243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
ScanBody Direct Engaging
Analog
Ref. DDG-2202101
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
D D G - C o m p o n e n t s
Dentsply Friadent® Xive® 4.5 (Ref.DDG-2203)
DDG-2200 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
Scanbody InterfacesNon engaging
ScanBody DirectEngaging
Ref. DDG-220340
Technical Specifications
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
49www.ddg-scanlab.com
Screw
Engagongcastable abutment
Scanbody InterfacesEngaging (IntraOral)
Non engagongcastable abutment
Ref. DDG-220383
Ref. DDG-220311
Ref. DDG-220341
Ref. DDG-220310
Ref. DDG-220343
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
ScanBody Direct Engaging
Analog
Ref. DDG-220301
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
D D G - C o m p o n e n t s
Dentsply Friadent® Xive® 5.5 (Ref.DDG-2204)
DDG-2200 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
Scanbody InterfacesNon engaging
ScanBody DirectEngaging
Ref. DDG-220340
Technical Specifications
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
51www.ddg-scanlab.com
Screw
Engagongcastable abutment
Scanbody InterfacesEngaging (IntraOral)
Non engagongcastable abutment
Ref. DDG-220383
Ref. DDG-220311
Ref. DDG-220341
Ref. DDG-220310
Ref. DDG-220443
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
ScanBody Direct Engaging
Analog
Ref. DDG-2203101
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
D D G - C o m p o n e n t s
BTI® Internal® 4.1 (Ref.DDG-2301)
DDG-2300 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
53www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Screw
Engagingcastable abutment
Titanium engagingInterface
Scanbody InterfacesNon engaging
Analog
Straight Zrabutment 2 mm
Scanbody InterfacesEngaging (IntraOral)
Non engaging castable abutment
Titanium Non engaging Interface
ScanBody DirectEngaging
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.
• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.
• Interfaces Anodized.
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5
grade.
• Cast component.• Engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. • Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.
• Made in Stainless steel.
• For cemented resto-rations. Non engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.
• Interfaces Anodized.
• For scan Implant position. • Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.
(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Ref. DDG-230125
Ref. DDG-230183
Ref. DDG-230111
Ref. DDG-230131
Ref. DDG-230140
Ref. DDG-230101
Ref. DDG-230126
Ref. DDG-230110
Ref. DDG-230130
Ref. DDG-230143Ref. DDG-230141
Ref. DDG-420201
BTI® Internal® 5.5 (Ref.DDG-2302)
DDG-2300 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
Scanbody InterfacesNon engaging
ScanBody DirectEngaging
Ref. DDG-230283
Technical Specifications
• For scan Implant position. • Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
55www.ddg-scanlab.com
Screw
Titanium engagingInterface
Scanbody InterfacesEngaging (IntraOral
Ref. DDG-230210
Ref. DDG-230201
Ref. DDG-230228
Ref. DDG-230211
Ref. DDG-230243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For scan Implant position. • Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
ScanBody Direct Engaging
Non engagongcastable abutment
Nobel Biocare Nobel Active® 3.5 (Ref.DDG-3101)
DDG-3100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
57www.ddg-scanlab.com
Straight Zrabutment 1 mm
Scanbody InterfacesEngaging (IntraOral)
Engagingcastable abutment
Titanium engagingInterface
ScanBody DirectNon engaging
Non Engagingcastable abutment
Straight Zrabutment 2 mm
ScanBody InterfacesNon engaging
Screw
Titanium Non engaging Interface
ScanBody DirectEngaging
Ref. DDG-310125
Ref. DDG-310141
Ref. DDG-310111
Ref. DDG-310131
Ref. DDG-310142
Ref. DDG-310110
Ref. DDG-310126
Ref. DDG-310140
Ref. DDG-310183
Ref. DDG-310130
Ref. DDG-310143
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For cemented resto-rations. • Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For scan Implant position. • Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
• Cast component. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. • Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For scan Implant position. • Non engaging.• For use in Laboratory and IntraOral.• On Titanium Inter-faces.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
• For fixation of the restoration. • High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Analog
Ref. DDG-310101
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
Nobel Biocare Nobel Active® 4.3 (Ref.DDG-3102)
DDG-3100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
59www.ddg-scanlab.com
Straight Zrabutment 1 mm
Scanbody InterfacesEngaging (IntraOral)
Engagingcastable abutment
Titanium engagingInterface
ScanBody DirectNon engaging
Non Engagingcastable abutment
Straight Zrabutment 2 mm
ScanBody InterfacesNon engaging
Screw
Titanium Non engaging Interface
ScanBody DirectEngaging
Ref. DDG-310125
Ref. DDG-310241
Ref. DDG-310211
Ref. DDG-310231
Ref. DDG-310242
Ref. DDG-310210
Ref. DDG-310226
Ref. DDG-310240
Ref. DDG-310283
Ref. DDG-310230
Ref. DDG-310243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For cemented resto-rations. • Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For scan Implant position. • Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
• Cast component. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. • Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For scan Implant position. • Non engaging.• For use in Laboratory and IntraOral.• On Titanium Inter-faces.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
• For fixation of the restoration. • High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Analog
Ref. DDG-310201
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
Zimmer® Internal Hex® 3.5 (Ref.DDG-3201) Part. 1
DDG-3200 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Angled titaniumabutment 15º
ScanBody DirectEngaging
Ref. DDG-320112
Technical Specifications
• Used for bridge abut-ment and crown.• Angled 15º.• Engaging.• DDG-32012-1mm • DDG-32013-2mm • High Quality.• High Strength.• Made in titanium 5 grade.
61www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Titanium HealingCap
Engagingcastable abutment
Titanium engagingInterface
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Straight Titaniumabutment
Screw
Titanium Non engaging Interface
Ref. DDG-320101
Ref. DDG-320125
Ref. DDG-320146
Ref. DDG-320111
Ref. DDG-320131
Ref. DDG-320110
Ref. DDG-320126
Ref. DDG-320147
Ref. DDG-320183
Ref. DDG-320130
Ref. DDG-320114
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Used for bridge abut-ment and crown.• Engaging.• 1 mm.• High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Used for bridge abut-ment and crown.• Engaging.• 2 mm.• High Quality.• High Strength.• Made in titanium 5 grade.
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Used for bridge abut-ment and crown.• Angled 25º.• Engaging.• DDG-32014-1mm • DDG-32015-2mm • High Quality.• High Strength.• Made in titanium 5 grade.
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Angled titaniumabutment 25º
Zimmer® Internal Hex® 3.5 (Ref.DDG-3201) Part. 2
DDG-3200 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
Scanbody InterfacesNon engaging
ScanBody DirectEngaging
Ref. DDG-320140
Technical Specifications
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
63www.ddg-scanlab.com
Impression copingOpen Tray
Titanium engagingInterface
Scanbody InterfacesEngaging (IntraOral)
Titanium Non engaging Interface
Ref. DDG-320170
Ref. DDG-320113
Ref. DDG-320141
Ref. DDG-320112
Ref. DDG-320143
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Used to mark the placement of a implant in an impression.• Open Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• Cast-On component.• Engaging. • For create a Crown (Screw retened) and Bridge (cemented).• Base Cr-Co.• High Quality.• High Strength.• Cnc Machined.• Made in Delrin Plastic and Cr-Co.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast-On component.• Non engaging. • For create a Bridge (cemented).• Base Cr-Co.• High Quality.• High Strength.• Cnc Machined.• Made in Delrin Plastic and Cr-Co.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
ScanBody Direct Engaging
Zimmer® Internal Hex.® 4.5 (Ref.DDG-3202)
DDG-3200 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Scanbody InterfacesNon engaging
ScanBody DirectEngaging
Ref. DDG-320240
Technical Specifications
• For scan Implant position. Titanium.• Non engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
65www.ddg-scanlab.com
Straight Zrabutment 1 mm
Screw
Engagingcastable abutment
Titanium engagingInterface
Analog
Straight Zrabutment 2 mm
Scanbody InterfacesEngaging (IntraOral)
Non engagingcastable abutment
Titanium Non engaging Interface
Ref. DDG-320225
Ref. DDG-320283
Ref. DDG-320211
Ref. DDG-320231
Ref. DDG-320201
Ref. DDG-320226
Ref. DDG-320241
Ref. DDG-320210
Ref. DDG-320230
Ref. DDG-320243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
ScanBody DirectNon Engaging
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
Analog Engagingcastable abutment
Non engagingcastable abutment
Straight Zrabutment 1 mm
Straight Zrabutment 2 mm
Titanium EngagingInterface
Titanium Non engagingInterface
Screw Scanbody InterfacesEngaging (IntraOral)
65www.ddg-scanlab.com
Zimmer® Internal Hex.® 5.7 (Ref.DDG-3203)
DDG-3200 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
67www.ddg-scanlab.com
Screw Non engagingcastable abutment
Engagingcastable abutment
Analog
ScanBody DirectEngaging
Ref. DDG-320383 Ref. DDG-320310Ref. DDG-320311
Ref. DDG-320301
Ref. DDG-320343
Technical Specifications Technical SpecificationsTechnical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
Biocomp® (Ref.DDG-3301)
DDG-3300 System
D D G - C o m p o n e n t s
69www.ddg-scanlab.com
ScanBody DirectNon Engaging
Ref. DDG-330143
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Non engaging.• Only for Bridge.• Not necessary screw.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Biocomp® (Ref.DDG-3302)
DDG-3300 System
D D G - C o m p o n e n t s
71www.ddg-scanlab.com
ScanBody DirectNon Engaging
Ref. DDG-330243
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Non engaging.• Only for Bridge.• Not necessary screw.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Nobel Biocare MultiUnit® 4.8 (Ref.DDG-4101)
DDG-4100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
73www.ddg-scanlab.com
Screw
Impression copingClosed Tray
Non engagingcastable abutment
MultiUnit angled 17ºAbutment
Plastic Healing Cap
Analog
MultiUnitAbutment
Handling Tool
Temporary Abutment
MultiUnit angled 30ºAbutment
ScanBody DirectEngaging
Ref. DDG-410180
Ref. DDG-410171
Ref. DDG-410110
Ref. DDG-410195
Ref. DDG-410158
Ref. DDG-410101
Ref. DDG-410190
Ref. DDG-410127
Ref. DDG-410198
Ref. DDG-410142
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration. • High Quality.• High Strength.• Made in titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Closed Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
•For screwreteined restorations. • Engaging• For Bränemark 4.1.• DDG-410195-3mm• DDG-410196-4mm• DDG-410197-5.5mm• with screw.• Made in Titanium 5 grade.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • Made in Delrin Plastic.
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
•For screwreteined restorations. • Engaging• For Bränemark 4.1.• DDG-410190-2mm• DDG-410191-3mm• DDG-410192-4mm• DDG-410193-5mm• DDG-410194-7mm• with screw.• Made in Titanium 5 grade.
• Included with angled abutment Free.• Made in titanium 5 grade.
• Used for make Tem-porary.• Non Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
•For screwreteined restorations. • Engaging• For Bränemark 4.1.• DDG-410198-3mm• DDG-410199-4mm• DDG-410118-5.5mm• with screw.• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
Included with angled abutments
Nobel Biocare MultiUnit® 6.0 (Ref.DDG-4102)
DDG-4100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
75www.ddg-scanlab.com
Non engagingcastable abutment
Analog ScanBody DirectEngaging
Ref. DDG-410210 Ref. DDG-410242
Technical SpecificationsTechnical Specifications Technical Specifications
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For scan Implant position. • High Accuracy• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Ref. DDG-410201
BTI® External Hex® 3.5 (Ref.DDG-4201)
DDG-4200 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
Scanbody InterfacesNon engaging
ScanBody DirectEngaging
Ref. DDG-420183
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
77www.ddg-scanlab.com
Impression copingOpen Tray
Titanium engagingInterface
Straight Titaniumabutment
Titanium Non engaging Interface
Ref. DDG-420110
Ref. DDG-420101
Ref. DDG-420128
Ref. DDG-420111
Ref. DDG-420143
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• Used for bridge abut-ment and crown.• Engaging.• 2 mm.• High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
ScanBody Direct Engaging
BTI® External Hex® 4.1 (Ref.DDG-4202) Part. 1
DDG-4200 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
79www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Straight Titaniumabutment Engaging
Engagingcastable abutment
Titanium engagingInterface
Cr-Co Base EngagingCastable abutment
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Straight Titaniumabutment Non Engaging
Locator abutment
Titanium Non engaging Interface
Cr-Co Base Non engagingCastable abutment
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.
• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.
• Interfaces Anodized.
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5
grade.
• Cast component.• Engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Cast-On component.• Engaging. • For create a Crown (Screw retened) and Bridge (cemented).• Base Cr-Co.• High Quality.• High Strength.• Cnc Machined.• Made in Delrin Plastic and Cr-Co.
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.
• Made in Delrin Plastic.
• For cemented resto-rations. Non engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.
• Interfaces Anodized.
• Used for bridge abut-ment and crown.• Non engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• Abutment for Overdentadures. • High accuracy.• High Quality..• Made in Titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Cast-On component.• Engaging. • For create a Crown (Screw retened) and Bridge (cemented).• Base Cr-Co.• High Quality.• High Strength.• Cnc Machined.• Made in Delrin Plastic
and Cr-Co.
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Ref. DDG-420225
Ref. DDG-420221
Ref. DDG-420211
Ref. DDG-420231
Ref. DDG-420213
Ref. DDG-420210
Ref. DDG-420226
Ref. DDG-420260
Ref. DDG-420230
Ref. DDG-420218Ref. DDG-420220
Ref. DDG-420201
BTI® External Hex® 4.1 (Ref.DDG-4202) Part. 2
DDG-4200 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
81www.ddg-scanlab.com
Angled titaniumabutment 15º
Screw UnigripDrive Flat seat
Scanbody InterfacesEngaging (IntraOral)
Screw
Titanium Impressioncoping OpenTray
ScanBody DirectNon engaging
Angled titaniumabutment 25º
Titanium Healingabutment
Scanbody InterfacesNon engaging
Screw
Titanium Impressioncoping ClosedTray
ScanBody DirectEngaging
Ref. DDG-420222
Ref. DDG-420282
Ref. DDG-420241
Ref. DDG-420280
Ref. DDG-420270
Ref. DDG-420242
Ref. DDG-420224
Ref. DDG-420250
Ref. DDG-420240
Ref. DDG-420281
Ref. DDG-420271
Ref. DDG-420243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Used for bridge abut-ment and crown.• Angled 15º.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• For fixation of the restoration.• Flat seat. • High Quality.• High Strength.• Made in titanium 5 grade.
• For scan Implant position. • Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For fixation of the restoration.• Unigrip screwdriver. • High Quality.• High Strength.• Made in titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Open Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy• Non engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
• Used for bridge abut-ment and crown.• Angled 25º.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • DDG-420250-2mm• DDG-420251-3mm• DDG-420252-4mm• DDG-420253-5mm• Made in Titanium 5 grade.
• For scan Implant position. • Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For fixation of the restoration. • Low profile.• 1.2 Hex.• High Quality.• High Strength.• Made in titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Closed Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
BTI® External Hex.® 5.7 (Ref.DDG-4203)
DDG-4200 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
83www.ddg-scanlab.com
Screw Non engagingcastable abutment
Engagingcastable abutment
Straight titaniumabutment 2mm
ScanBody DirectEngaging
Ref. DDG-420383 Ref. DDG-420310Ref. DDG-420311
Ref. DDG-420317
Ref. DDG-420343
Technical Specifications Technical SpecificationsTechnical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• Used for bridge abut-ment and crown.• 2 mmm.• Wide Shoulder.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t sD D G - C o m p o n e n t s
Straight titaniumabutment 2mm
Ref. DDG-420316
Technical Specifications
• Used for bridge abut-ment and crown.• 2 mmm.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
Analog
Ref. DDG-420301
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
D D G - C o m p o n e n t s
Microdent® Microdent System® 3.5 (Ref.DDG-4301)
DDG-4300 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
Scanbody InterfacesNon engaging
ScanBody DirectEngaging
Ref. DDG-430140
Technical Specifications
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
85www.ddg-scanlab.com
Screw
Engagongcastable abutment
Scanbody InterfacesEngaging (IntraOral)
Non engagongcastable abutment
Ref. DDG-430183
Ref. DDG-430111
Ref. DDG-430141
Ref. DDG-430110
Ref. DDG-430143
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
ScanBody Direct Engaging
Analog
Ref. DDG-430101
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
D D G - C o m p o n e n t s
Microdent® Microdent System® 4.2 (Ref.DDG-4302)
DDG-4300 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
Scanbody InterfacesNon engaging
ScanBody DirectEngaging
Ref. DDG-430240
Technical Specifications
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
87www.ddg-scanlab.com
Screw
Engagongcastable abutment
Scanbody InterfacesEngaging (IntraOral)
Non engagongcastable abutment
Ref. DDG-430283
Ref. DDG-430211
Ref. DDG-430241
Ref. DDG-430210
Ref. DDG-430243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
ScanBody Direct Engaging
Analog
Ref. DDG-430201
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
D D G - C o m p o n e n t s
Microdent® Microdent System® 5.1 (Ref.DDG-4303)
DDG-4300 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
Scanbody InterfacesNon engaging
ScanBody DirectEngaging
Ref. DDG-430340
Technical Specifications
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
89www.ddg-scanlab.com
Screw
Engagongcastable abutment
Scanbody InterfacesEngaging (IntraOral)
Non engagongcastable abutment
Ref. DDG-430383
Ref. DDG-430311
Ref. DDG-430341
Ref. DDG-430310
Ref. DDG-430343
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Non engaging. • For create a bridge.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
ScanBody Direct Engaging
Analog
Ref. DDG-430301
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
D D G - C o m p o n e n t s
Biomet 3i® Certain® 3.4 (Ref.DDG-5101) Part.1
DDG-5100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
91www.ddg-scanlab.com
Straight Zrabutment 1 mm
Non Engagingcastable abutment
Titanium engagingInterface
Analog
Straight Zrabutment 2 mm
Engagingcastable abutment
Titanium Non engagingInterface
Ref. DDG-510125
Ref. DDG-510110
Ref. DDG-510131
Ref. DDG-510101
Ref. DDG-510126
Ref. DDG-510111
Ref. DDG-510130
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
D D G - C o m p o n e n t s
Biomet 3i® Certain® 3.4 (Ref.DDG-5101) Part.2
DDG-5100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
93www.ddg-scanlab.com
Titanium Impressioncoping Open Tray
Screw
Scanbody InterfacesNon engaging
Straight titanium abutment
Scanbody InterfacesEngaging (IntraOral)
Titanium Healingabutment
ScanBody DirectEngaging
Ref. DDG-510170
Ref. DDG-510183
Ref. DDG-510140
Ref. DDG-510121
Ref. DDG-510141
Ref. DDG-510150
Ref. DDG-510143
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Used to mark the placement of a implant in an impression.• Open Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• For fixation of the restoration.• High Quality.• High Strength.• Made in titanium 5 grade.
• For scan Implant position.Titanium.• Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• For scan Implant position. • Engaging.Titanium.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • DDG-510150-2mm• DDG-510151-3mm• DDG-510152-4mm• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy.• Engaging.Titanium.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
Biomet 3i® Certain® 4.1 (Ref.DDG-5102) Part. 1
DDG-5100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
95www.ddg-scanlab.com
Straight Zrabutment 1 mm
Non Engagingcastable abutment
Titanium engagingInterface
Analog
Straight Zrabutment 2 mm
Engagingcastable abutment
Titanium Non engagingInterface
Ref. DDG-510225
Ref. DDG-510210
Ref. DDG-510231
Ref. DDG-510201
Ref. DDG-510226
Ref. DDG-510211
Ref. DDG-510230
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
Biomet 3i® Certain® 4.1 (Ref.DDG-5102) Part. 2
DDG-5100 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
97www.ddg-scanlab.com
Screw
Titanium Healingabutment
Titanium Impressioncoping Open Tray
Scanbody InterfacesNon engaging
Screw
Scanbody InterfacesEngaging (IntraOral)
Straight titanium abutment
Titanium Impressioncoping Closed Tray
ScanBody DirectEngaging
Ref. DDG-510206
Ref. DDG-510250
Ref. DDG-510270
Ref. DDG-510240
Ref. DDG-510283
Ref. DDG-510241
Ref. DDG-510221
Ref. DDG-510271
Ref. DDG-510243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Wide size. • High Quality.• High Strength.• Made in titanium 5 grade.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • DDG-510250-2mm• DDG-510251-3mm• DDG-510252-4mm• Made in Titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Open Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For fixation of the restoration.• Normal size• High Quality.• High Strength.• Made in titanium 5 grade.
• For scan Implant position. • Engaging.Titanium.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Closed Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
Biomet 3i® Certain® 5.0 (Ref.DDG-5103) Part. 1
DDG-5100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
99www.ddg-scanlab.com
Straight Zrabutment 1 mm
Non Engagingcastable abutment
Titanium engagingInterface
Analog
Straight Zrabutment 2 mm
Engagingcastable abutment
Titanium Non engagingInterface
Ref. DDG-510325
Ref. DDG-510310
Ref. DDG-510331
Ref. DDG-510301
Ref. DDG-510326
Ref. DDG-510311
Ref. DDG-510330
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
D D G - C o m p o n e n t s
Biomet 3i® Certain® 5.0 (Ref.DDG-5103) Part. 2
DDG-5100 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
101www.ddg-scanlab.com
Screw
Titanium Healingabutment
Titanium Impressioncoping Open Tray
Scanbody InterfacesNon engaging
Screw
Scanbody InterfacesEngaging (IntraOral)
Straight titanium abutment
Titanium Impressioncoping Closed Tray
ScanBody DirectEngaging
Ref. DDG-510306
Ref. DDG-510350
Ref. DDG-510370
Ref. DDG-510340
Ref. DDG-510383
Ref. DDG-510341
Ref. DDG-510321
Ref. DDG-510371
Ref. DDG-510343
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Wide size. • High Quality.• High Strength.• Made in titanium 5 grade.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • DDG-510350-2mm• DDG-510351-3mm• DDG-510352-4mm• Made in Titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Open Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For fixation of the restoration.• Normal size• High Quality.• High Strength.• Made in titanium 5 grade.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Closed Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
Klockner® SK2® 4.3 (Ref.DDG-5201)
DDG-5200 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
103www.ddg-scanlab.com
Straight titanium abutment
Titanium Impressioncoping Closed Tray
Non Engagingcastable abutment
Screw
Titanium Healingabutment
Analog
Screw
Titanium Healingabutment
Engagingcastable abutment
Titanium Impressioncoping Open Tray
ScanBody DirectEngaging
Ref. DDG-520128
Ref. DDG-520171
Ref. DDG-520110
Ref. DDG-520188
Ref. DDG-520153
Ref. DDG-520101
Ref. DDG-520187
Ref. DDG-520154
Ref. DDG-520111
Ref. DDG-520170
Ref. DDG-520143
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Closed Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For fixation of the restoration.• For cross Screwdriver. • High Quality.• High Strength.• Made in titanium 5 grade.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • Height 5mm• Made in Titanium 5 grade.
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • Height 5mm• Made in Titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• Used to mark the placement of a implant in an impression.• Open Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
Osstem® GS System® Mini (Ref.DDG-5301)
DDG-5300 System
D D G - C o m p o n e n t s
105www.ddg-scanlab.com
ScanBody DirectEngaging
Ref. DDG-530143
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Abutment Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Osstem® GS System® Regular (Ref.DDG-5302)
DDG-5300 System
D D G - C o m p o n e n t s
107www.ddg-scanlab.com
ScanBody DirectEngaging
Ref. DDG-530243
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Abutment Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Biomet 3i® External Hex 3.25 (Ref.DDG-6101)
DDG-6100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
109www.ddg-scanlab.com
Straight Zrabutment 1 mm
Screw
Engagingcastable abutment
Titanium engagingInterface
ScanBody InterfacesNon engaging
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Scanbody InterfacesEngaging (IntraOral)
Screw
Titanium Non engaging Interface
ScanBody DirectEngaging
Ref. DDG-610125
Ref. DDG-610186
Ref. DDG-610111
Ref. DDG-610131
Ref. DDG-610140
Ref. DDG-610110
Ref. DDG-610226
Ref. DDG-610141
Ref. DDG-610184
Ref. DDG-610130
Ref. DDG-610243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For cemented resto-rations. • Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For fixation of the restoration. • Square drive.• High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. • Non engaging.• For use in Laboratory and IntraOral.• On Titanium Inter-faces.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
• Cast component. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. • Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For scan Implant position. • Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For fixation of the restoration. • High Quality.• High Strength.• DDG-610184 1,2hex• DDG-610185 1,25hex• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Analog
Ref. DDG-610101
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
Biomet 3i® External Hex 4.1 (Ref.DDG-6102) Part. 1
DDG-6100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
111www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Straight Titaniumabutment Engaging
Engagingcastable abutment
Titanium engagingInterface
Cr-Co Base EngagingCastable abutment
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Straight Titaniumabutment Non Engaging
Locator abutment
Titanium Non engaging Interface
Cr-Co Base Non engaging
Castable abutment
Ref. DDG-610201
Ref. DDG-610225
Ref. DDG-610221
Ref. DDG-610211
Ref. DDG-610231
Ref. DDG-610213
Ref. DDG-610210
Ref. DDG-610226
Ref. DDG-610220
Ref. DDG-610260
Ref. DDG-610230
Ref. DDG-610212
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Cast-On component.• Engaging. • For create a crown and a custom abutment for bridge.• For create a custom abutment for bridge.• Cnc Machined.• Made in Delrin Plastic and Cr-Co HQ.• Built-in library Cad.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Used for bridge abutment.• Non Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• Abutment for Overdentadures. • High accuracy.• Screw reteined.• Made in Titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Cast-On component.• Non Engaging. • For create a custom abutment for bridge.• Cnc Machined.• Made in Delrin Plastic and Cr-Co HQ.• Built-in library Cad.
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Biomet 3i® External Hex 4.1 (Ref.DDG-6102) Part. 2
DDG-6100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
113www.ddg-scanlab.com
Angled Titaniumabutment 15º
Screw UnigripDrive Flat seat
Scanbody InterfacesEngaging (IntraOral)
Screw UnigripDrive Tapered seat
Titanium Impressioncoping Open Tray
ScanBody DirectNon engaging
Angled Titaniumabutment 25º
Titanium Impressioncoping Closed Tray
Scanbody InterfacesNon engaging
Screw 1.2low profile
Titanium Healingabutment
ScanBody DirectEngaging
Ref. DDG-610222
Ref. DDG-610282
Ref. DDG-610241
Ref. DDG-610280
Ref. DDG-610271
Ref. DDG-610242
Ref. DDG-610224
Ref. DDG-610270
Ref. DDG-610240
Ref. DDG-610281
Ref. DDG-610250
Ref. DDG-610243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Used for bridge abut-ment and crown.• Angled 15º.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• For fixation of the restoration.• Flat seat. • High Quality.• High Strength.• Made in titanium 5 grade.
• For scan Implant position. • Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For fixation of the restoration.• Unigrip screwdriver. • High Quality.• High Strength.• Made in titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Open Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy.• Special Edition.• Non Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
• Used for bridge abut-ment and crown.• Angled 25º.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• Used to mark the placement of a implant in an impression.• Closed Tray.• Engaging.• High Quality.• Made in Titanium 5 grade.
• For scan Implant position. • Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For fixation of the restoration. • Low profile.• 1.2 Hex.• High Quality.• High Strength.• Made in titanium 5 grade.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • DDG-210250-2mm• DDG-210251-3mm• DDG-210252-4mm• DDG-210253-5mm• Made in Titanium 5 grade.
• For scan Implant position. • High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Biomet 3i® External Hex 5.0 (Ref.DDG-6103)
DDG-6100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
115www.ddg-scanlab.com
Screw
Non Engagingcastable abutment
Screw
Analog
Screw
Engagingcastable abutment
ScanBody DirectEngaging
Ref. DDG-610384
Ref. DDG-610310
Ref. DDG-610386
Ref. DDG-610301
Ref. DDG-610385
Ref. DDG-610311
Ref. DDG-610343
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• For fixation of the restoration.• Unigrip screwdriver. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For fixation of the restoration.• Unigrip screwdriver. • High Quality.• High Strength.• Made in titanium 5 grade.
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For fixation of the restoration.• Unigrip screwdriver. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. • High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
Implant Direct® Bar abutment® (Ref.DDG-6201)
DDG-6200 System
D D G - C o m p o n e n t s
117www.ddg-scanlab.com
ScanBody DirectNon Engaging
Ref. DDG-620143
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Non engaging.• Only for Bridge.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Straumann® Tissue Level® 3.5 (Ref.DDG-7101)
DDG-7100 System
D D G - C o m p o n e n t s
119www.ddg-scanlab.com
ScanBody DirectEngaging
Ref. DDG-710143
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Abutment Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Straumann® Tissue Level® 4.8 (Ref.DDG-7102) Part. 1
DDG-7100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
121www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Angled Titaniumabutment Engaging
Engagingcastable abutment
Titanium engagingInterface
Titanium Healingabutment
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Angled Titaniumabutment Engaging
Straight Titaniumabutment Engaging
Titanium Non engaging Interface
SynOcta octagonal
nut abutment
Ref. DDG-710201
Ref. DDG-710225
Ref. DDG-710270
Ref. DDG-710211
Ref. DDG-710231
Ref. DDG-710207
Ref. DDG-710210
Ref. DDG-710226
Ref. DDG-710273
Ref. DDG-710221
Ref. DDG-710230
Ref. DDG-710265
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Used for bridge abut-ment and crown.• Engaging.• Type A• High Quality.• High Strength.• DDG-710270-15º• DDG-710271-20º• DDG-710272-25º• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
•for allow gingival tisseus to heal prior to the placement abutment and maintain proper spacing in the oral cavity. • DDG-710207-0mm• DDG-710208-1.5mm• DDG-710251-3mm• DDG-710209-4.5mm• Made in Titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Used for bridge abut-ment and crown.• Engaging.• Type B.• High Quality.• High Strength.• DDG-710273-15º• DDG-710274-20º• DDG-710275-25º• Made in titanium 5 grade.
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
•For screw reteined restorations. • Engaging• High Precision.• Made in Titanium 5 grade.
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Straumann® Tissue Level® 4.8 (Ref.DDG-7103) Part. 2
DDG-7100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
123www.ddg-scanlab.com
Castable shoulder
Titanium Temporaryabutment
Screw
Non Engagingcastable abutment
Scanbody InterfacesNon engaging
Screw
Engagingcastable abutment
Scanbody InterfacesEngaging (IntraOral)
Castable chimmey
Locator abutment
ScanBody DirectEngaging
Ref. DDG-710289
Ref. DDG-710229
Ref. DDG-710211
Ref. DDG-710218
Ref. DDG-710240
Ref. DDG-710210
Ref. DDG-710219
Ref. DDG-710241
Ref. DDG-710221
Ref. DDG-710230
Ref. DDG-710243
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• DDG-710289-S SIZE• DDG-710216-M SIZE• DDG-710217-L SIZE• Made in Delrin Plastic.
• Used for Temporary.• Engaging.• High Quality.• High Strength.• For SynOcta System. • Made in titanium 5 grade.
• For fixation of the restoration.• For SynOcta System. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• For SynOcta System. • Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
• Cast component.• Engaging. • For create a custom abutment.• For SynOcta System. • Cnc Machined.• Made in Delrin Plastic.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• Abutment for Overdentadures. • High accuracy.• Screw reteined.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
Straumann® Tissue Level® 4.8 SynOcta (Ref.DDG-7103)
DDG-7100 System
D D G - C o m p o n e n t s
125www.ddg-scanlab.com
ScanBody DirectEngaging
Ref. DDG-710243
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Abutment Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Straumann® Tissue Level® 6.0 (Ref.DDG-7104)
DDG-7100 System
D D G - C o m p o n e n t s
127www.ddg-scanlab.com
ScanBody DirectEngaging
Ref. DDG-710343
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Abutment Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Straumann® Tissue Level® 6.0 SynOcta (Ref.DDG-7105)
DDG-7100 System
D D G - C o m p o n e n t s
129www.ddg-scanlab.com
ScanBody DirectEngaging
Ref. DDG-710543
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Abutment Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Camlog® Screw Line ® 3.3 (Ref.DDG-7201)
DDG-7200 System
D D G - C o m p o n e n t s
131www.ddg-scanlab.com
ScanBody Direct75 Engaging
Ref. DDG-720143
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Camlog® Screw Line ® 3.8 (Ref.DDG-7202)
DDG-7200 System
D D G - C o m p o n e n t s
133www.ddg-scanlab.com
ScanBody DirectEngaging
Ref. DDG-720243
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Camlog® Screw Line ® 4.3 (Ref.DDG-7203)
DDG-7200 System
D D G - C o m p o n e n t s
135www.ddg-scanlab.com
ScanBody Direct Engaging
Ref. DDG-720343
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Camlog® Screw Line ® 5.0 (Ref.DDG-7204)
DDG-7200 System
D D G - C o m p o n e n t s
137www.ddg-scanlab.com
ScanBody Direct Engaging
Ref. DDG-720443
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Camlog® Screw Line ® 6.0 (Ref.DDG-7205)
DDG-7200 System
D D G - C o m p o n e n t s
139www.ddg-scanlab.com
ScanBody DirectEngaging
Ref. DDG-720543
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Camlog® Screw Line ® Bar Abutment (Ref.DDG-7206)
DDG-7200 System
D D G - C o m p o n e n t s
141www.ddg-scanlab.com
ScanBody DirectNon Engaging
Ref. DDG-720643
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Non engaging.• Only for Bridge.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Straumann® Bone Level® 3.3 (Ref.DDG-8101)
DDG-8100 System
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
ScanBody DirectNon Engaging
ScanBody DirectEngaging
Ref. DDG-810142
Technical Specifications
• For scan Implant position. • High Accuracy.• Special Edition.• Non Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
143www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Scanbody InterfacesEngaging (IntraOral)
Engagingcastable abutment
Titanium engagingInterface
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Scanbody InterfacesNon engaging
Screw
Titanium Non engaging Interface
Ref. DDG-810101
Ref. DDG-810125
Ref. DDG-810141
Ref. DDG-810111
Ref. DDG-810131
Ref. DDG-810110
Ref. DDG-810126
Ref. DDG-810140
Ref. DDG-810183
Ref. DDG-810130
Ref. DDG-810143
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For scan Implant position. Titanium.• Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Straumann® Bone Level® 4.1 (Ref.DDG-8102) Part 1
DDG-8100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
D D G - C o m p o n e n t s D D G - C o m p o n e n t sD D G - C o m p o n e n t s
145www.ddg-scanlab.com
Analog
Straight Zrabutment 1 mm
Engagingcastable abutment
Titanium engagingInterface
Non Engagingcastable abutment
Straight Zrabutment 2 mm
Screw
Titanium Non engaging Interface
Ref. DDG-810201
Ref. DDG-810225
Ref. DDG-810211
Ref. DDG-810231
Ref. DDG-810210
Ref. DDG-810226
Ref. DDG-810183
Ref. DDG-810230
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
Technical Specifications
• Implant Replica.• Exact.• For duplicate the shape and position of the implant platform.• Made in Stainless steel.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• Cast component.• Engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
•For screw-cement reteined restorations. • Engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
• Cast component.• Non engaging. • For create a custom abutment.• Cnc Machined.• Made in Delrin Plastic.
• For cemented resto-rations. Engaging.• Zirconium High Aesthetics.• With Titanium Interface. • High Precision. • High Strength.• Made in CIP zirconia. • Made in Titanium 5 grade.• Interfaces Anodized.
• For fixation of the restoration.• Normal type.. • High Quality.• High Strength.• Made in titanium 5 grade.
•For screw-cement reteined restorations. • Non engaging• High Precision.• Interfaces Anodized.• Made in Titanium 5 grade.
D D G - C o m p o n e n t s
D D G - C o m p o n e n t s
Straumann® Bone Level® 4.1 (Ref.DDG-8102) Part 2
DDG-8100 System
D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s D D G - C o m p o n e n t s
147www.ddg-scanlab.com
Scanbody InterfacesEngaging (IntraOral)
ScanBody DirectNon Engaging
Scanbody InterfacesNon engaging
Titanium Estheticabutment
ScanBody DirectEngaging
Ref. DDG-810241 Ref. DDG-810242Ref. DDG-810240
Ref. DDG-810230
Ref. DDG-810243
Technical Specifications Technical SpecificationsTechnical Specifications
Technical Specifications
Technical Specifications
• For scan Implant position. Titanium.• Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• For scan Implant position. • High Accuracy.• Special Edition.• Non Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
• For scan Implant position. Titanium.• Non Engaging.• For use in Laboratory and IntrOral.• On Titanium Inter-faces.• Compatible for all Cad system.•Not necessary spray.(90% of cases).
• Used for bridge abut-ment and crown.• Engaging.• High Quality.• High Strength.• Made in titanium 5 grade.
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
Dentsply Friadent Ankylos® Implant Level® (Ref.DDG-8201)
DDG-8200 System
D D G - C o m p o n e n t s
149www.ddg-scanlab.com
ScanBody Direct Engaging
Ref. DDG-820143
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
ScanBody DirectNon Engaging
Ref. DDG-820142
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• NonEngaging.• Only for Bridge.• For use in Laboratory and IntraOral.• Implant Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
D D G - C o m p o n e n t s
Dentsply Friadent Ankylos® Abutment Level® (Ref.DDG-8202)
DDG-8200 System
D D G - C o m p o n e n t s
151www.ddg-scanlab.com
ScanBody DirectNon Engaging
Ref. DDG-820243
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Non engaging.• For use in Laboratory and IntraOral.• Abutment Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
BioHorizons® Internal® 3.5 (Ref.DDG-9101)
DDG-9100 System
D D G - C o m p o n e n t s
153www.ddg-scanlab.com
ScanBody Direct Engaging
Ref. DDG-910143
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Abutment Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
BioHorizons® Internal® 4.5 (Ref.DDG-9102)
DDG-9100 System
D D G - C o m p o n e n t s
155www.ddg-scanlab.com
ScanBody DirectEngaging
Ref. DDG-910243
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Abutment Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
BioHorizons® Internal® 5.7 (Ref.DDG-9103)
DDG-9100 System
D D G - C o m p o n e n t s
157www.ddg-scanlab.com
ScanBody DirectEngaging
Ref. DDG-910343
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Abutment Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Osstem® TS System® Mini (Ref.DDG-9201)
DDG-9200 System
D D G - C o m p o n e n t s
159www.ddg-scanlab.com
ScanBody DirectEngaging
Ref. DDG-920143
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Abutment Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Osstem® TS System® Regular (Ref.DDG-9202)
DDG-9200 System
D D G - C o m p o n e n t s
161www.ddg-scanlab.com
ScanBody DirectEngaging
Ref. DDG-920243
Technical Specifications
• For scan Implant position. Titanium.• High Accuracy.• Engaging.• For use in Laboratory and IntraOral.• Abutment Level.• Compatible for all Cad system.• Not necessary spray.(90% of cases).
Sales:[email protected]
Support:[email protected]
DDG-ComponentsP.O.Box #24 .11403Jerez de la Fra.Cá[email protected]