Catalog Dowels and Other Pins

PINS

& W

ASHE

RS

P1204MaterialThrough hardened and ground steel.

Technical NotesTo DIN 6325, ISO 8734.m6 diameter tolerance.Length tolerances to js14.

Sold in packs of 10.

TipsFor larger sizes please see following pages.

Dowel Pins - hardened and ground steelDIN 6325, ISO 8734

Order No. d l Double shearstrength (kN)

P1204.01-04 1 4 1,5P1204.01-05 1 5 1,5P1204.01-06 1 6 1,5P1204.01-08 1 8 1,5P1204.01-10 1 10 1,5P1204.01-12 1 12 1,5

P1204.01.5-04 1,5 4 3,4P1204.01.5-05 1,5 5 3,4P1204.01.5-06 1,5 6 3,4P1204.01.5-08 1,5 8 3,4P1204.01.5-10 1,5 10 3,4P1204.01.5-12 1,5 12 3,4P1204.01.5-14 1,5 14 3,4P1204.01.5-16 1,5 16 3,4

P1204.02-04 2 4 5,5P1204.02-05 2 5 5,5P1204.02-06 2 6 5,5P1204.02-08 2 8 5,5P1204.02-10 2 10 5,5P1204.02-12 2 12 5,5P1204.02-14 2 14 5,5P1204.02-16 2 16 5,5P1204.02-18 2 18 5,5P1204.02-20 2 20 5,5P1204.02-24 2 24 5,5

P1204.02,5-05 2,5 5 8,0P1204.02,5-06 2,5 6 8,0P1204.02,5-08 2,5 8 8,0P1204.02,5-10 2,5 10 8,0P1204.02,5-12 2,5 12 8,0P1204.02,5-14 2,5 14 8,0P1204.02,5-16 2,5 16 8,0P1204.02,5-18 2,5 18 8,0P1204.02,5-20 2,5 20 8,0P1204.02,5-24 2.5 24 8,0

P1204.03-05 3 5 13,0P1204.03-06 3 6 13,0P1204.03-08 3 8 13,0P1204.03-10 3 10 13,0P1204.03-12 3 12 13,0P1204.03-14 3 14 13,0P1204.03-16 3 16 13,0P1204.03-18 3 18 13,0P1204.03-20 3 20 13,0P1204.03-24 3 24 13,0P1204.03-28 3 28 13,0P1204.03-30 3 30 13,0

PINS & WASHERS




TipsFor smaller sizes please see previous pages, for larger sizes please see following pages.



P1204.04-06 4 6 22,0P1204.04-08 4 8 22,0P1204.04-10 4 10 22,0P1204.04-12 4 12 22,0P1204.04-14 4 14 22,0P1204.04-16 4 16 22,0P1204.04-18 4 18 22,0P1204.04-20 4 20 22,0P1204.04-24 4 24 22,0P1204.04-28 4 28 22,0P1204.04-30 4 30 22,0P1204.04-32 4 32 22,0P1204.04-36 4 36 22,0P1204.04-40 4 40 22,0P1204.04-45 4 45 22,0P1204.04-50 4 50 22,0

P1204.05-06 5 6 31,0P1204.05-08 5 8 31,0P1204.05-10 5 10 31,0P1204.05-12 5 12 31,0P1204.05-14 5 14 31,0P1204.05-16 5 16 31,0P1204.05-18 5 18 31,0P1204.05-20 5 20 31,0P1204.05-24 5 24 31,0P1204.05-28 5 28 31,0P1204.05-30 5 30 31,0P1204.05-32 5 32 31,0P1204.05-36 5 36 31,0P1204.05-40 5 40 31,0P1204.05-45 5 45 31,0P1204.05-50 5 50 31,0P1204.05-55 5 55 31,0P1204.05-60 5 60 31,0

P1204.06-08 6 8 53,0P1204.06-10 6 10 53,0P1204.06-12 6 12 53,0P1204.06-14 6 14 53,0P1204.06-16 6 16 53,0P1204.06-18 6 18 53,0P1204.06-20 6 20 53,0P1204.06-24 6 24 53,0P1204.06-28 6 28 53,0P1204.06-30 6 30 53,0P1204.06-32 6 32 53,0P1204.06-36 6 36 53,0P1204.06-40 6 40 53,0P1204.06-45 6 45 53,0P1204.06-50 6 50 53,0P1204.06-55 6 55 53,0P1204.06-60 6 60 53,0

PINS

& W

ASHE

RS









P1204.10-100 10 100 132,0P1204.10-110 10 110 132,0P1204.10-120 10 120 132,0

P1204.12-18 12 18 210,0P1204.12-20 12 20 210,0P1204.12-24 12 24 210,0P1204.12-28 12 28 210,0P1204.12-30 12 30 210,0P1204.12-32 12 32 210,0P1204.12-36 12 36 210,0P1204.12-40 12 40 210,0P1204.12-45 12 45 210,0P1204.12-50 12 50 210,0P1204.12-55 12 55 210,0

PINS & WASHERS




TipsFor smaller sizes please see previous pages.



P1204.12-60 12 60 210,0P1204.12-70 12 70 210,0P1204.12-80 12 80 210,0P1204.12-90 12 90 210,0

P1204.12-100 12 100 210,0P1204.12-110 12 110 210,0P1204.12-120 12 120 210,0

P1204.14-28 14 28 260,0P1204.14-30 14 30 260,0P1204.14-32 14 32 260,0P1204.14-36 14 36 260,0P1204.14-40 14 40 260,0P1204.14-45 14 45 260,0P1204.14-50 14 50 260,0P1204.14-55 14 55 260,0P1204.14-60 14 60 260,0P1204.14-70 14 70 260,0P1204.14-80 14 80 260,0P1204.14-90 14 90 260,0

P1204.14-100 14 100 260,0P1204.14-110 14 110 260,0P1204.14-120 14 120 260,0

P1204.16-28 16 28 350,0P1204.16-30 16 30 350,0P1204.16-32 16 32 350,0P1204.16-36 16 36 350,0P1204.16-40 16 40 350,0P1204.16-45 16 45 350,0P1204.16-50 16 50 350,0P1204.16-55 16 55 350,0P1204.16-60 16 60 350,0P1204.16-70 16 70 350,0P1204.16-80 16 80 350,0P1204.16-90 16 90 350,0

P1204.16-100 16 100 350,0P1204.16-110 16 110 350,0P1204.16-120 16 120 350,0

P1204.20-32 20 32 485,0P1204.20-36 20 36 485,0P1204.20-40 20 40 485,0P1204.20-45 20 45 485,0P1204.20-50 20 50 485,0P1204.20-55 20 55 485,0P1204.20-60 20 60 485,0P1204.20-70 20 70 485,0P1204.20-80 20 80 485,0P1204.20-90 20 90 485,0

P1204.20-100 20 100 485,0P1204.20-110 20 110 485,0P1204.20-120 20 120 485,0

PINS

& W

ASHE

RS

P1206MaterialA2 stainless steel (1,4305).Chamfered end, type B.

Technical NotesGround to m6 (h8 over Ø16mm).ISO 2338 (1997).Length tolerances:3-10mm long - ±0,2512-50mm long - ±0,5over 50mm long - ±0,75.


TipsFor larger sizes please see following pages.A2 stainless steel grade is a harder material than the A4 stainless steel dowel pins (part no. P1207). It is less resistant to corrosion, but less expensive than the A4 stainless steel dowel pins P1207.

Dowel Pins - A2 stainless steelISO 2338 (1997)


P1206.01-03 1 3 0,7P1206.01-04 1 4 0,7P1206.01-05 1 5 0,7P1206.01-06 1 6 0,7P1206.01-08 1 8 0,7P1206.01-10 1 10 0,7P1206.01-12 1 12 0,7

P1206.01.5-03 1,5 3 1,7P1206.01.5-04 1,5 4 1,7P1206.01.5-05 1,5 5 1,7P1206.01.5-06 1,5 6 1,7P1206.01.5-08 1,5 8 1,7P1206.01.5-10 1,5 10 1,7P1206.01.5-12 1,5 12 1,7P1206.01.5-14 1,5 14 1,7P1206.01.5-16 1,5 16 1,7P1206.01.5-18 1,5 18 1,7P1206.01.5-20 1,5 20 1,7P1206.01.5-24 1,5 24 1,7

P1206.02-04 2 4 2,9P1206.02-05 2 5 2,9P1206.02-06 2 6 2,9P1206.02-08 2 8 2,9P1206.02-10 2 10 2,9P1206.02-12 2 12 2,9P1206.02-14 2 14 2,9P1206.02-16 2 16 2,9P1206.02-18 2 18 2,9P1206.02-20 2 20 2,9P1206.02-24 2 24 2,9

P1206.02.5-04 2,5 4 4,4P1206.02.5-05 2,5 5 4,4P1206.02.5-06 2,5 6 4,4P1206.02.5-08 2,5 8 4,4P1206.02.5-10 2,5 10 4,4P1206.02.5-12 2,5 12 4,4P1206.02.5-14 2,5 14 4,4P1206.02.5-16 2,5 16 4,4P1206.02.5-18 2,5 18 4,4P1206.02.5-20 2,5 20 4,4P1206.02.5-24 2,5 24 4,4P1206.02.5-28 2,5 28 4,4P1206.02.5-30 2,5 30 4,4

P1206.03-05 3 5 6,6P1206.03-06 3 6 6,6P1206.03-08 3 8 6,6P1206.03-10 3 10 6,6

PINS & WASHERS




TipsFor smaller sizes please see previous pages, for larger sizes please see following pages.A2 stainless steel grade is a harder material than the A4 stainless steel dowel pins (part no. P1207). It is less resistant to corrosion, but less expensive than the A4 stainless steel dowel pins P1207.



P1206.03-12 3 12 6,6P1206.03-14 3 14 6,6P1206.03-16 3 16 6,6P1206.03-18 3 18 6,6P1206.03-20 3 20 6,6P1206.03-24 3 24 6,6P1206.03-28 3 28 6,6P1206.03-30 3 30 6,6P1206.03-32 3 32 6,6P1206.03-36 3 36 6,6P1206.03-40 3 40 6,6P1206.03-45 3 45 6,6P1206.03-50 3 50 6,6

P1206.04-05 4 5 11,7P1206.04-06 4 6 11,7P1206.04-08 4 8 11,7P1206.04-10 4 10 11,7P1206.04-12 4 12 11,7P1206.04-14 4 14 11,7P1206.04-16 4 16 11,7P1206.04-18 4 18 11,7P1206.04-20 4 20 11,7P1206.04-24 4 24 11,7P1206.04-28 4 28 11,7P1206.04-30 4 30 11,7P1206.04-32 4 32 11,7P1206.04-36 4 36 11,7P1206.04-40 4 40 11,7P1206.04-45 4 45 11,7P1206.04-50 4 50 11,7P1206.04-55 4 55 11,7P1206.04-60 4 60 11,7


PINS

& W

ASHE

RS




TipsFor smaller sizes please see previous pages, for larger sizes please see following pages.A2 stainless steel grade is a harder material than the A4 stainless steel dowel pins (part no. P1207). It is less resistant to corrosion, but less expensive than the A4 stainless steel dowel pins P1207.



P1206.06-08 6 8 26,0P1206.06-10 6 10 26,0P1206.06-12 6 12 26,0P1206.06-14 6 14 26,0P1206.06-16 6 16 26,0P1206.06-18 6 18 26,0P1206.06-20 6 20 26,0P1206.06-24 6 24 26,0P1206.06-28 6 28 26,0P1206.06-30 6 30 26,0P1206.06-32 6 32 26,0P1206.06-36 6 36 26,0P1206.06-40 6 40 26,0P1206.06-45 6 45 26,0P1206.06-50 6 50 26,0P1206.06-55 6 55 26,0P1206.06-60 6 60 26,0P1206.06-70 6 70 26,0P1206.06-80 6 80 26,0

P1206.08-08 8 8 47,0P1206.08-10 8 10 47,0P1206.08-12 8 12 47,0P1206.08-14 8 14 47,0P1206.08-16 8 16 47,0P1206.08-18 8 18 47,0P1206.08-20 8 20 47,0P1206.08-24 8 24 47,0P1206.08-28 8 28 47,0P1206.08-30 8 30 47,0P1206.08-32 8 32 47,0P1206.08-36 8 36 47,0P1206.08-40 8 40 47,0P1206.08-45 8 45 47,0P1206.08-50 8 50 47,0P1206.08-55 8 55 47,0P1206.08-60 8 60 47,0P1206.08-70 8 70 47,0P1206.08-80 8 80 47,0P1206.08-90 8 90 47,0

P1206.08-100 8 100 47,0P1206.08-110 8 110 47,0P1206.08-120 8 120 47,0

P1206.10-14 10 14 64,1P1206.10-16 10 16 64,1P1206.10-18 10 18 64,1P1206.10-20 10 20 64,1P1206.10-24 10 24 64,1P1206.10-28 10 28 64,1P1206.10-30 10 30 64,1P1206.10-32 10 32 64,1P1206.10-36 10 36 64,1P1206.10-40 10 40 64,1

PINS & WASHERS




TipsFor smaller sizes please see previous pages.A2 stainless steel grade is a harder material than the A4 stainless steel dowel pins (part no. P1207). It is less resistant to corrosion, but less expensive than the A4 stainless steel parts.



P1206.10-45 10 45 64,1P1206.10-50 10 50 64,1P1206.10-55 10 55 64,1P1206.10-60 10 60 64,1P1206.10-70 10 70 64,1P1206.10-80 10 80 64,1P1206.10-90 10 90 64,1

P1206.10-100 10 100 64,1P1206.10-110 10 110 64,1P1206.10-120 10 120 64,1

P1206.12-24 12 24 92,0P1206.12-28 12 28 92,0P1206.12-30 12 30 92,0P1206.12-32 12 32 92,0P1206.12-36 12 36 92,0P1206.12-40 12 40 92,0P1206.12-45 12 45 92,0P1206.12-50 12 50 92,0P1206.12-55 12 55 92,0P1206.12-60 12 60 92,0P1206.12-70 12 70 92,0P1206.12-80 12 80 92,0P1206.12-90 12 90 92,0

P1206.12-100 12 100 92,0P1206.12-110 12 110 92,0P1206.12-120 12 120 92,0

P1206.16-24 16 24 160,0P1206.16-28 16 28 160,0P1206.16-30 16 30 160,0P1206.16-32 16 32 160,0P1206.16-36 16 36 160,0P1206.16-40 16 40 160,0P1206.16-45 16 45 160,0P1206.16-50 16 50 160,0P1206.16-55 16 55 160,0P1206.16-60 16 60 160,0P1206.16-70 16 70 160,0P1206.16-80 16 80 160,0P1206.16-90 16 90 160,0

P1206.16-100 16 100 160,0P1206.16-110 16 110 160,0P1206.16-120 16 120 160,0

PINS

& W

ASHE

RS

P1207MaterialA4 stainless steel (1,4571).Rounded end.

Technical NotesGround to m6 (h8 over Ø16mm).DIN 7.Length tolerances:3-10mm long - +0,3:-012-50mm long - +0,5:-0over 50mm long - +0,8:-0Sold in packs of 10.Note:Overall length is greater than the nominal length (see dimension l and c).


TipsFor smaller sizes please see previous pages, for larger sizes please see following pages.A4 stainless steel grade is a softer material than the A2 stainless steel dowel pins (part no. P1206). It is more resistant to corrosion, and more expensive than the A2 stainless steel dowel pins P1206.

Dowel Pins - A4 stainless steelDIN 7

Order No. d l c r Double shearstrength (kN)

P1207.01-03 1 3 0,15 1 0,7P1207.01-04 1 4 0,15 1 0,7P1207.01-05 1 5 0,15 1 0,7P1207.01-06 1 6 0,15 1 0,7P1207.01-08 1 8 0,15 1 0,7P1207.01-10 1 10 0,15 1 0,7P1207.01-12 1 12 0,15 1 0,7P1207.01-14 1 14 0,15 1 0,7P1207.01-16 1 16 0,15 1 0,7

P1207.01.5-03 1,5 3 0,23 1,6 1,7P1207.01.5-04 1,5 4 0,23 1,6 1,7P1207.01.5-05 1,5 5 0,23 1,6 1,7P1207.01.5-06 1,5 6 0,23 1,6 1,7P1207.01.5-08 1,5 8 0,23 1,6 1,7P1207.01.5-10 1,5 10 0,23 1,6 1,7P1207.01.5-12 1,5 12 0,23 1,6 1,7P1207.01.5-14 1,5 14 0,23 1,6 1,7P1207.01.5-16 1,5 16 0,23 1,6 1,7P1207.01.5-18 1,5 18 0,23 1,6 1,7P1207.01.5-20 1,5 20 0,23 1,6 1,7P1207.01.5-24 1,5 24 0,23 1,6 1,7

P1207.02-04 2 4 0,3 2 2,9P1207.02-05 2 5 0,3 2 2,9P1207.02-06 2 6 0,3 2 2,9P1207.02-08 2 8 0,3 2 2,9P1207.02-10 2 10 0,3 2 2,9P1207.02-12 2 12 0,3 2 2,9P1207.02-14 2 14 0,3 2 2,9P1207.02-16 2 16 0,3 2 2,9P1207.02-18 2 18 0,3 2 2,9P1207.02-20 2 20 0,3 2 2,9P1207.02-24 2 24 0,3 2 2,9

P1207.02.5-04 2,5 4 0,4 2,5 4,4P1207.02.5-05 2,5 5 0,4 2,5 4,4P1207.02.5-06 2,5 6 0,4 2,5 4,4P1207.02.5-08 2,5 8 0,4 2,5 4,4P1207.02.5-10 2,5 10 0,4 2,5 4,4P1207.02.5-12 2,5 12 0,4 2,5 4,4P1207.02.5-14 2,5 14 0,4 2,5 4,4P1207.02.5-16 2,5 16 0,4 2,5 4,4P1207.02.5-18 2,5 18 0,4 2,5 4,4P1207.02.5-20 2,5 20 0,4 2,5 4,4P1207.02.5-24 2,5 24 0,4 2,5 4,4P1207.02.5-28 2,5 28 0,4 2,5 4,4

PINS & WASHERS




TipsFor larger sizes please see following pages.A4 stainless steel grade is a softer material than the A2 stainless steel dowel pins (part no. P1206). It is more resistant to corrosion, and more expensive than the A2 stainless steel dowel pins P1206.



P1207.03-05 3 5 0,45 3 6,6P1207.03-06 3 6 0,45 3 6,6P1207.03-08 3 8 0,45 3 6,6P1207.03-10 3 10 0,45 3 6,6P1207.03-12 3 12 0,45 3 6,6P1207.03-14 3 14 0,45 3 6,6P1207.03-16 3 16 0,45 3 6,6P1207.03-18 3 18 0,45 3 6,6P1207.03-20 3 20 0,45 3 6,6P1207.03-24 3 24 0,45 3 6,6P1207.03-28 3 28 0,45 3 6,6P1207.03-32 3 32 0,45 3 6,6P1207.03-36 3 36 0,45 3 6,6P1207.03-40 3 40 0,45 3 6,6

P1207.04-05 4 5 0,6 4 11,7P1207.04-06 4 6 0,6 4 11,7P1207.04-08 4 8 0,6 4 11,7P1207.04-10 4 10 0,6 4 11,7P1207.04-12 4 12 0,6 4 11,7P1207.04-14 4 14 0,6 4 11,7P1207.04-16 4 16 0,6 4 11,7P1207.04-18 4 18 0,6 4 11,7P1207.04-20 4 20 0,6 4 11,7P1207.04-24 4 24 0,6 4 11,7P1207.04-28 4 28 0,6 4 11,7P1207.04-32 4 32 0,6 4 11,7P1207.04-36 4 36 0,6 4 11,7P1207.04-40 4 40 0,6 4 11,7

P1207.05-06 5 6 0,75 5 18,1P1207.05-08 5 8 0,75 5 18,1P1207.05-10 5 10 0,75 5 18,1P1207.05-12 5 12 0,75 5 18,1P1207.05-14 5 14 0,75 5 18,1P1207.05-16 5 16 0,75 5 18,1P1207.05-18 5 18 0,75 5 18,1P1207.05-20 5 20 0,75 5 18,1P1207.05-24 5 24 0,75 5 18,1P1207.05-28 5 28 0,75 5 18,1P1207.05-32 5 32 0,75 5 18,1P1207.05-36 5 36 0,75 5 18,1P1207.05-40 5 40 0,75 5 18,1P1207.05-45 5 45 0,75 5 18,1P1207.05-50 5 50 0,75 5 18,1P1207.05-60 5 60 0,75 5 18,1

PINS

& W

ASHE

RS




TipsFor smaller sizes please see previous pages.A4 stainless steel grade is a softer material than the A2 stainless steel dowel pins (part no. P1206). It is more resistant to corrosion, and more expensive than the A2 stainless steel dowel pins P1206.



P1207.06-08 6 8 0,9 6 26,0P1207.06-10 6 10 0,9 6 26,0P1207.06-12 6 12 0,9 6 26,0P1207.06-14 6 14 0,9 6 26,0P1207.06-16 6 16 0,9 6 26,0P1207.06-18 6 18 0,9 6 26,0P1207.06-20 6 20 0,9 6 26,0P1207.06-24 6 24 0,9 6 26,0P1207.06-28 6 28 0,9 6 26,0P1207.06-30 6 30 0,9 6 26,0P1207.06-32 6 32 0,9 6 26,0P1207.06-36 6 36 0,9 6 26,0P1207.06-40 6 40 0,9 6 26,0P1207.06-45 6 45 0,9 6 26,0P1207.06-50 6 50 0,9 6 26,0P1207.06-55 6 55 0,9 6 26,0P1207.06-60 6 60 0,9 6 26,0P1207.06-70 6 70 0,9 6 26,0P1207.06-80 6 80 0,9 6 26,0

P1207.08-08 8 8 1,2 8 47,0P1207.08-10 8 10 1,2 8 47,0P1207.08-12 8 12 1,2 8 47,0P1207.08-14 8 14 1,2 8 47,0P1207.08-16 8 16 1,2 8 47,0P1207.08-18 8 18 1,2 8 47,0P1207.08-20 8 20 1,2 8 47,0P1207.08-24 8 24 1,2 8 47,0P1207.08-28 8 28 1,2 8 47,0P1207.08-30 8 30 1,2 8 47,0P1207.08-32 8 32 1,2 8 47,0P1207.08-36 8 36 1,2 8 47,0P1207.08-40 8 40 1,2 8 47,0P1207.08-45 8 45 1,2 8 47,0P1207.08-50 8 50 1,2 8 47,0P1207.08-55 8 55 1,2 8 47,0P1207.08-60 8 60 1,2 8 47,0P1207.08-70 8 70 1,2 8 47,0P1207.08-80 8 80 1,2 8 47,0P1207.08-90 8 90 1,2 8 47,0

P1207.08-100 8 100 1,2 8 47,0P1207.08-110 8 110 1,2 8 47,0P1207.08-120 8 120 1,2 8 47,0

PINS & WASHERS




TipsFor smaller sizes please see previous pages.A4 stainless steel grade is a softer material than the A2 stainless steel dowel pins (part no. P1206). It is more resistant to corrosion, and more expensive than the A2 stainless steel dowel pins P1206.



P1207.10-14 10 14 1,5 10 64,1P1207.10-16 10 16 1,5 10 64,1P1207.10-18 10 18 1,5 10 64,1P1207.10-20 10 20 1,5 10 64,1P1207.10-24 10 24 1,5 10 64,1P1207.10-28 10 28 1,5 10 64,1P1207.10-30 10 30 1,5 10 64,1P1207.10-32 10 32 1,5 10 64,1P1207.10-36 10 36 1,5 10 64,1P1207.10-40 10 40 1,5 10 64,1P1207.10-45 10 45 1,5 10 64,1P1207.10-50 10 50 1,5 10 64,1P1207.10-55 10 55 1,5 10 64,1P1207.10-60 10 60 1,5 10 64,1P1207.10-70 10 70 1,5 10 64,1P1207.10-80 10 80 1,5 10 64,1P1207.10-90 10 90 1,5 10 64,1

P1207.10-100 10 100 1,5 10 64,1P1207.10-110 10 110 1,5 10 64,1P1207.10-120 10 120 1,5 10 64,1

P1207.12-24 12 24 1,8 12 92,0P1207.12-28 12 28 1,8 12 92,0P1207.12-30 12 30 1,8 12 92,0P1207.12-32 12 32 1,8 12 92,0P1207.12-36 12 36 1,8 12 92,0P1207.12-40 12 40 1,8 12 92,0P1207.12-45 12 45 1,8 12 92,0P1207.12-50 12 50 1,8 12 92,0P1207.12-55 12 55 1,8 12 92,0P1207.12-60 12 60 1,8 12 92,0P1207.12-70 12 70 1,8 12 92,0P1207.12-80 12 80 1,8 12 92,0P1207.12-90 12 90 1,8 12 92,0

P1207.12-100 12 100 1,8 12 92,0P1207.12-110 12 110 1,8 12 92,0P1207.12-120 12 120 1,8 12 92,0

PINS

& W

ASHE

RS

P1212MaterialHardened and ground steel.

Technical NotesTo DIN 797D.Ground to m6 on Ø.Ground flat along length for air release.Length tolerances to js 15.



Dowel Pins - extractable, with air releaseDIN 797D

Order No. d l Thread

P1212.04-10 4 10 M3P1212.04-12 4 12 M3P1212.04-14 4 14 M3P1212.04-16 4 16 M3P1212.04-18 4 18 M3P1212.04-20 4 20 M3P1212.04-24 4 24 M3P1212.04-28 4 28 M3P1212.04-30 4 30 M3P1212.04-32 4 32 M3P1212.04-36 4 36 M3P1212.04-40 4 40 M3P1212.04-45 4 45 M3P1212.04-50 4 50 M3


P1212.06-12 6 12 M4P1212.06-14 6 14 M4P1212.06-16 6 16 M4P1212.06-18 6 18 M4P1212.06-20 6 20 M4P1212.06-24 6 24 M4P1212.06-28 6 28 M4P1212.06-30 6 30 M4P1212.06-32 6 32 M4P1212.06-36 6 36 M4P1212.06-40 6 40 M4P1212.06-45 6 45 M4P1212.06-50 6 50 M4P1212.06-55 6 55 M4P1212.06-60 6 60 M4P1212.06-70 6 70 M4P1212.06-80 6 80 M4P1212.06-90 6 90 M4

PINS & WASHERS







P1212.08-16 8 16 M5P1212.08-18 8 18 M5P1212.08-20 8 20 M5P1212.08-24 8 24 M5P1212.08-28 8 28 M5P1212.08-30 8 30 M5P1212.08-32 8 32 M5P1212.08-36 8 36 M5P1212.08-40 8 40 M5P1212.08-45 8 45 M5P1212.08-50 8 50 M5P1212.08-55 8 55 M5P1212.08-60 8 60 M5P1212.08-70 8 70 M5P1212.08-80 8 80 M5P1212.08-90 8 90 M5

P1212.08-100 8 100 M5


P1212.10-100 10 100 M6P1212.10-120 10 120 M6


P1212.12-100 12 100 M6P1212.12-120 12 120 M6

PINS

& W

ASHE

RS







P1212.14-28 14 28 M8P1212.14-30 14 30 M8P1212.14-32 14 32 M8P1212.14-36 14 36 M8P1212.14-40 14 40 M8P1212.14-45 14 45 M8P1212.14-50 14 50 M8P1212.14-55 14 55 M8P1212.14-60 14 60 M8P1212.14-70 14 70 M8P1212.14-80 14 80 M8P1212.14-90 14 90 M8

P1212.14-100 14 100 M8P1212.14-120 14 120 M8

P1212.16-32 16 32 M8P1212.16-36 16 36 M8P1212.16-40 16 40 M8P1212.16-45 16 45 M8P1212.16-50 16 50 M8P1212.16-55 16 55 M8P1212.16-60 16 60 M8P1212.16-70 16 70 M8P1212.16-80 16 80 M8P1212.16-90 16 90 M8

P1212.16-100 16 100 M8P1212.16-120 16 120 M8

P1212.20-32 20 32 M10P1212.20-36 20 36 M10P1212.20-40 20 40 M10P1212.20-45 20 45 M10P1212.20-50 20 50 M10P1212.20-55 20 55 M10P1212.20-60 20 60 M10P1212.20-70 20 70 M10P1212.20-80 20 80 M10P1212.20-90 20 90 M10

P1212.20-100 20 100 M10P1212.20-120 20 120 M10

PINS

& W

ASHE

RS

P1208MaterialMild steel WS 1,0718.

Technical NotesTo DIN 1473, GP 3, similar to ISO 8740.Allow the use of non precision holes. Used to fix two or more components together with maximum rigidity.Length l does not include radiused ends. Length tolerances to js 15.


TipsThree swaged grooves at 120° pitch all along the length. When the pin is driven into the drilled hole the material displaced is forced back to close up the groove and lock the pin into place.

Grooved Pins - full length, mild steelDIN 1473, GP3

Order No. d l c Dia.Over grooves

Hole Sizemin.

Hole Sizemax.

Double ShearStrength kN

P1208.01-04 1,0 4 0,14 1,05 0,94 1,0 0,7P1208.01-05 1,0 5 0,14 1,05 0,94 1,0 0,7P1208.01-06 1,0 6 0,14 1,05 0,94 1,0 0,7P1208.01-08 1,0 8 0,14 1,05 0,94 1,0 0,7

P1208.01,2-04 1,2 4 0,16 1,25 1,14 1,2 1,0P1208.01,2-05 1,2 5 0,16 1,25 1,14 1,2 1,0P1208.01,2-06 1,2 6 0,16 1,25 1,14 1,2 1,0P1208.01,2-08 1,2 8 0,16 1,25 1,14 1,2 1,0

P1208.01,5-04 1,5 4 0,20 1,60 1,44 1,5 1,6P1208.01,5-05 1,5 5 0,20 1,60 1,44 1,5 1,6P1208.01,5-06 1,5 6 0,20 1,60 1,44 1,5 1,6P1208.01,5-08 1,5 8 0,20 1,60 1,44 1,5 1,6P1208.01,5-10 1,5 10 0,20 1,60 1,44 1,5 1,6P1208.01,5-12 1,5 12 0,20 1,60 1,44 1,5 1,6P1208.01,5-14 1,5 14 0,20 1,60 1,44 1,5 1,6P1208.01,5-16 1,5 16 0,20 1,60 1,44 1,5 1,6P1208.01,5-18 1,5 18 0,20 1,60 1,44 1,5 1,6P1208.01,5-20 1,5 20 0,20 1,60 1,44 1,5 1,6

P1208.02-04 2,0 4 0,25 2,15 1,94 2,0 2,85P1208.02-05 2,0 5 0,25 2,15 1,94 2,0 2,85P1208.02-06 2,0 6 0,25 2,15 1,94 2,0 2,85P1208.02-08 2,0 8 0,25 2,15 1,94 2,0 2,85P1208.02-10 2,0 10 0,25 2,15 1,94 2,0 2,85P1208.02-12 2,0 12 0,25 2,15 1,94 2,0 2,85P1208.02-14 2,0 14 0,25 2,15 1,94 2,0 2,85P1208.02-16 2,0 16 0,25 2,15 1,94 2,0 2,85P1208.02-18 2,0 18 0,25 2,15 1,94 2,0 2,85P1208.02-20 2,0 20 0,25 2,15 1,94 2,0 2,85P1208.02-24 2,0 24 0,25 2,15 1,94 2,0 2,85P1208.02-26 2,0 26 0,25 2,15 1,94 2,0 2,85P1208.02-28 2,0 28 0,25 2,15 1,94 2,0 2,85P1208.02-30 2,0 30 0,25 2,15 1,94 2,0 2,85

P1208.02,5-06 2,5 6 0,30 2,65 2,44 2,5 4,25P1208.02,5-08 2,5 8 0,30 2,65 2,44 2,5 4,25P1208.02,5-10 2,5 10 0,30 2,65 2,44 2,5 4,25P1208.02,5-12 2,5 12 0,30 2,65 2,44 2,5 4,25P1208.02,5-14 2,5 14 0,30 2,65 2,44 2,5 4,25P1208.02,5-16 2,5 16 0,30 2,65 2,44 2,5 4,25P1208.02,5-18 2,5 18 0,30 2,65 2,44 2,5 4,25P1208.02,5-20 2,5 20 0,30 2,65 2,44 2,5 4,25P1208.02,5-24 2,5 24 0,30 2,65 2,44 2,5 4,25P1208.02,5-26 2,5 26 0,30 2,65 2,44 2,5 4,25P1208.02,5-28 2,5 28 0,30 2,65 2,44 2,5 4,25P1208.02,5-30 2,5 30 0,30 2,65 2,44 2,5 4,25

PINS & WASHERS





Grooved Pins - full lengthDIN 1473, GP3


Hole Sizemin.

Hole Sizemax.

Double Shear Strength kN

P1208.03-06 3,0 6 0,40 3,20 2,94 3,0 6,15P1208.03-08 3,0 8 0,40 3,20 2,94 3,0 6,15P1208.03-10 3,0 10 0,40 3,20 2,94 3,0 6,15P1208.03-12 3,0 12 0,40 3,20 2,94 3,0 6,15P1208.03-14 3,0 14 0,40 3,20 2,94 3,0 6,15P1208.03-16 3,0 16 0,40 3,20 2,94 3,0 6,15P1208.03-18 3,0 18 0,40 3,20 2,94 3,0 6,15P1208.03-20 3,0 20 0,40 3,20 2,94 3,0 6,15P1208.03-24 3,0 24 0,40 3,20 2,94 3,0 6,15P1208.03-26 3,0 26 0,40 3,20 2,94 3,0 6,15P1208.03-28 3,0 28 0,40 3,20 2,94 3,0 6,15P1208.03-30 3,0 30 0,40 3,20 2,94 3,0 6,15

P1208.04-06 4,0 6 0,50 4,25 3,93 4,0 10,6P1208.04-08 4,0 8 0,50 4,25 3,93 4,0 10,6P1208.04-10 4,0 10 0,50 4,25 3,93 4,0 10,6P1208.04-12 4,0 12 0,50 4,25 3,93 4,0 10,6P1208.04-14 4,0 14 0,50 4,25 3,93 4,0 10,6P1208.04-16 4,0 16 0,50 4,25 3,93 4,0 10,6P1208.04-18 4,0 18 0,50 4,25 3,93 4,0 10,6P1208.04-20 4,0 20 0,50 4,25 3,93 4,0 10,6P1208.04-24 4,0 24 0,50 4,25 3,93 4,0 10,6P1208.04-26 4,0 26 0,50 4,25 3,93 4,0 10,6P1208.04-28 4,0 28 0,50 4,25 3,93 4,0 10,6P1208.04-30 4,0 30 0,50 4,25 3,93 4,0 10,6P1208.04-32 4,0 32 0,50 4,25 3,93 4,0 10,6P1208.04-36 4,0 36 0,50 4,25 3,93 4,0 10,6P1208.04-40 4,0 40 0,50 4,25 3,93 4,0 10,6P1208.04-45 4,0 45 0,50 4,25 3,93 4,0 10,6P1208.04-50 4,0 50 0,50 4,25 3,93 4,0 10,6

P1208.05-08 5,0 8 0,60 5,25 4,93 5,0 16,5P1208.05-10 5,0 10 0,60 5,25 4,93 5,0 16,5P1208.05-12 5,0 12 0,60 5,25 4,93 5,0 16,5P1208.05-14 5,0 14 0,60 5,25 4,93 5,0 16,5P1208.05-16 5,0 16 0,60 5,25 4,93 5,0 16,5P1208.05-18 5,0 18 0,60 5,25 4,93 5,0 16,5P1208.05-20 5,0 20 0,60 5,25 4,93 5,0 16,5P1208.05-24 5,0 24 0,60 5,25 4,93 5,0 16,5P1208.05-26 5,0 26 0,60 5,25 4,93 5,0 16,5P1208.05-28 5,0 28 0,60 5,25 4,93 5,0 16,5P1208.05-30 5,0 30 0,60 5,25 4,93 5,0 16,5P1208.05-32 5,0 32 0,60 5,25 4,93 5,0 16,5P1208.05-36 5,0 34 0,60 5,25 4,93 5,0 16,5P1208.05-40 5,0 40 0,60 5,25 4,93 5,0 16,5P1208.05-45 5,0 45 0,60 5,25 4,93 5,0 16,5P1208.05-50 5,0 50 0,60 5,25 4,93 5,0 16,5

PINS

& W

ASHE

RS







Hole Sizemin.

Hole sizemax.



P1208.08-10 8,0 10 1,00 8,30 7,91 8,0 40,5P1208.08-12 8,0 12 1,00 8,30 7,91 8,0 40,5P1208.08-14 8,0 14 1,00 8,30 7,91 8,0 40,5P1208.08-16 8,0 16 1,00 8,30 7,91 8,0 40,5P1208.08-18 8,0 18 1,00 8,30 7,91 8,0 40,5P1208.08-20 8,0 20 1,00 8,30 7,91 8,0 40,5P1208.08-24 8,0 24 1,00 8,30 7,91 8,0 40,5P1208.08-26 8,0 26 1,00 8,30 7,91 8,0 40,5P1208.08-28 8,0 28 1,00 8,30 7,91 8,0 40,5P1208.08-30 8,0 30 1,00 8,30 7,91 8,0 40,5P1208.08-32 8,0 32 1,00 8,30 7,91 8,0 40,5P1208.08-36 8,0 36 1,00 8,30 7,91 8,0 40,5P1208.08-40 8,0 40 1,00 8,30 7,91 8,0 40,5P1208.08-45 8,0 45 1,00 8,30 7,91 8,0 40,5P1208.08-50 8,0 50 1,00 8,30 7,91 8,0 40,5P1208.08-55 8,0 55 1,00 8,30 7,91 8,0 40,5P1208.08-60 8,0 60 1,00 8,30 7,91 8,0 40,5P1208.08-65 8,0 65 1,00 8,30 7,91 8,0 40,5P1208.08-70 8,0 70 1,00 8,30 7,91 8,0 40,5

P1208.10-14 10,0 14 1,20 10,35 9,91 10,0 63,2P1208.10-16 10,0 16 1,20 10,35 9,91 10,0 63,2P1208.10-18 10,0 18 1,20 10,35 9,91 10,0 63,2P1208.10-20 10,0 20 1,20 10,35 9,91 10,0 63,2P1208.10-24 10,0 24 1,20 10,35 9,91 10,0 63,2P1208.10-26 10,0 26 1,20 10,35 9,91 10,0 63,2P1208.10-28 10,0 28 1,20 10,35 9,91 10,0 63,2P1208.10-30 10,0 30 1,20 10,35 9,91 10,0 63,2P1208.10-32 10,0 32 1,20 10,35 9,91 10,0 63,2P1208.10-36 10,0 36 1,20 10,35 9,91 10,0 63,2P1208.10-40 10,0 40 1,20 10,35 9,91 10,0 63,2P1208.10-45 10,0 45 1,20 10,35 9,91 10,0 63,2P1208.10-50 10,0 50 1,20 10,35 9,91 10,0 63,2

PINS & WASHERS


Technical NotesTo DIN 1473, GP 3, similar to ISO 8740.Allow the use of non precision holes. Used to fix two or more components together with maximum rigidity.Length l does not include radiused ends.Length tolerances to js 15.





Hole Sizemin.

Hole Sizemax.


P1208.10-55 10,0 55 1,20 10,35 9,91 10,0 63,2P1208.10-60 10,0 60 1,20 10,35 9,91 10,0 63,2P1208.10-65 10,0 65 1,20 10,35 9,91 10,0 63,2P1208.10-70 10,0 70 1,20 10,35 9,91 10,0 63,2P1208.10-75 10,0 75 1,20 10,35 9,91 10,0 63,2P1208.10-80 10,0 80 1,20 10,35 9,91 10,0 63,2

P1208.12-14 12,0 14 1,60 12,35 11,89 12,0 91P1208.12-16 12,0 16 1,60 12,35 11,89 12,0 91P1208.12-18 12,0 18 1,60 12,35 11,89 12,0 91P1208.12-20 12,0 20 1,60 12,35 11,89 12,0 91P1208.12-24 12,0 24 1,60 12,35 11,89 12,0 91P1208.12-26 12,0 26 1,60 12,35 11,89 12,0 91P1208.12-28 12,0 28 1,60 12,35 11,89 12,0 91P1208.12-30 12,0 30 1,60 12,35 11,89 12,0 91P1208.12-32 12,0 32 1,60 12,35 11,89 12,0 91P1208.12-36 12,0 36 1,60 12,35 11,89 12,0 91P1208.12-40 12,0 40 1,60 12,35 11,89 12,0 91P1208.12-45 12,0 45 1,60 12,35 11,89 12,0 91P1208.12-50 12,0 50 1,60 12,35 11,89 12,0 91P1208.12-55 12,0 55 1,60 12,35 11,89 12,0 91P1208.12-60 12,0 60 1,60 12,35 11,89 12,0 91P1208.12-65 12,0 65 1,60 12,35 11,89 12,0 91P1208.12-70 12,0 70 1,60 12,35 11,89 12,0 91P1208.12-75 12,0 75 1,60 12,35 11,89 12,0 91P1208.12-80 12,0 80 1,60 12,35 11,89 12,0 91

PINS

& W

ASHE

RS

P1209MaterialStainless steel A2 (DIN 1,4305)


Sold in packs of 10.For larger sizes please see following pages.


Grooved Pins - full length, stainless steel A2DIN 1473, GP3


Hole sizemin.

Hole sizemax.


P1209.01-04 1,0 4 0,14 1,05 0,94 1,0 0,7P1209.01-05 1,0 5 0,14 1,05 0,94 1,0 0,7P1209.01-06 1,0 6 0,14 1,05 0,94 1,0 0,7P1209.01-08 1,0 8 0,14 1,05 0,94 1,0 0,7

P1209.01,2-04 1,2 4 0,16 1,25 1,14 1,2 1,0P1209.01,2-05 1,2 5 0,16 1,25 1,14 1,2 1,0P1209.01,2-06 1,2 6 0,16 1,25 1,14 1,2 1,0P1209.01,2-08 1,2 8 0,16 1,25 1,14 1,2 1,0

P1209.01,5-04 1,5 4 0,20 1,60 1,44 1,5 1,6P1209.01,5-05 1,5 5 0,20 1,60 1,44 1,5 1,6P1209.01,5-06 1,5 6 0,20 1,60 1,44 1,5 1,6P1209.01,5-08 1,5 8 0,20 1,60 1,44 1,5 1,6P1209.01,5-10 1,5 10 0,20 1,60 1,44 1,5 1,6P1209.01,5-12 1,5 12 0,20 1,60 1,44 1,5 1,6P1209.01,5-14 1,5 14 0,20 1,60 1,44 1,5 1,6P1209.01,5-16 1,5 16 0,20 1,60 1,44 1,5 1,6P1209.01,5-18 1,5 18 0,20 1,60 1,44 1,5 1,6P1209.01,5-20 1,5 20 0,20 1,60 1,44 1,5 1,6

P1209.02-04 2,0 4 0,25 2,15 1,94 2,0 2,85P1209.02-05 2,0 5 0,25 2,15 1,94 2,0 2,85P1209.02-06 2,0 6 0,25 2,15 1,94 2,0 2,85P1209.02-08 2,0 8 0,25 2,15 1,94 2,0 2,85P1209.02-10 2,0 10 0,25 2,15 1,94 2,0 2,85P1209.02-12 2,0 12 0,25 2,15 1,94 2,0 2,85P1209.02-14 2,0 14 0,25 2,15 1,94 2,0 2,85P1209.02-16 2,0 16 0,25 2,15 1,94 2,0 2,85P1209.02-18 2,0 18 0,25 2,15 1,94 2,0 2,85P1209.02-20 2,0 20 0,25 2,15 1,94 2,0 2,85P1209.02-24 2,0 24 0,25 2,15 1,94 2,0 2,85P1209.02-26 2,0 26 0,25 2,15 1,94 2,0 2,85P1209.02-28 2,0 28 0,25 2,15 1,94 2,0 2,85P1209.02-30 2,0 30 0,25 2,15 1,94 2,0 2,85

P1209.02,5-06 2,5 6 0,30 2,65 2,44 2,5 4,25P1209.02,5-08 2,5 8 0,30 2,65 2,44 2,5 4,25P1209.02,5-10 2,5 10 0,30 2,65 2,44 2,5 4,25P1209.02,5-12 2,5 12 0,30 2,65 2,44 2,5 4,25P1209.02,5-14 2,5 14 0,30 2,65 2,44 2,5 4,25P1209.02,5-16 2,5 16 0,30 2,65 2,44 2,5 4,25P1209.02,5-18 2,5 18 0,30 2,65 2,44 2,5 4,25P1209.02,5-20 2,5 20 0,30 2,65 2,44 2,5 4,25P1209.02,5-24 2,5 24 0,30 2,65 2,44 2,5 4,25P1209.02,5-26 2,5 26 0,30 2,65 2,44 2,5 4,25P1209.02,5-28 2,5 28 0,30 2,65 2,44 2,5 4,25P1209.02,5-30 2,5 30 0,30 2,65 2,44 2,5 4,25

PINS & WASHERS



Sold in packs of 10.For smaller sizes please see previous pages, for larger sizes please see following pages.



Order No. d l c Dia. Over grooves

Hole Sizemin.

Hole Sizemax.


P1209.03-06 3,0 6 0,40 3,20 2,94 3,0 6,15P1209.03-08 3,0 8 0,40 3,20 2,94 3,0 6,15P1209.03-10 3,0 10 0,40 3,20 2,94 3,0 6,15P1209.03-12 3,0 12 0,40 3,20 2,94 3,0 6,15P1209.03-14 3,0 14 0,40 3,20 2,94 3,0 6,15P1209.03-16 3,0 16 0,40 3,20 2,94 3,0 6,15P1209.03-18 3,0 18 0,40 3,20 2,94 3,0 6,15P1209.03-20 3,0 20 0,40 3,20 2,94 3,0 6,15P1209.03-24 3,0 24 0,40 3,20 2,94 3,0 6,15P1209.03-26 3,0 26 0,40 3,20 2,94 3,0 6,15P1209.03-28 3,0 28 0,40 3,20 2,94 3,0 6,15P1209.03-30 3,0 30 0,40 3,20 2,94 3,0 6,15


P1209.05-08 5,0 8 0,60 5,25 4,93 5,0 16,5P1209.05-10 5,0 10 0,60 5,25 4,93 5,0 16,5P1209.05-12 5,0 12 0,60 5,25 4,93 5,0 16,5P1209.05-14 5,0 14 0,60 5,25 4,93 5,0 16,5P1209.05-16 5,0 16 0,60 5,25 4,93 5,0 16,5P1209.05-18 5,0 18 0,60 5,25 4,93 5,0 16,5P1209.05-20 5,0 20 0,60 5,25 4,93 5,0 16,5P1209.05-24 5,0 24 0,60 5,25 4,93 5,0 16,5P1209.05-26 5,0 26 0,60 5,25 4,93 5,0 16,5P1209.05-28 5,0 28 0,60 5,25 4,93 5,0 16,5P1209.05-30 5,0 30 0,60 5,25 4,93 5,0 16,5P1209.05-32 5,0 32 0,60 5,25 4,93 5,0 16,5P1209.05-36 5,0 36 0,60 5,25 4,93 5,0 16,5P1209.05-40 5,0 40 0,60 5,25 4,93 5,0 16,5P1209.05-45 5,0 45 0,60 5,25 4,93 5,0 16,5P1209.05-50 5,0 50 0,60 5,25 4,93 5,0 16,5

PINS

& W

ASHE

RS



Sold in packs of 10.For smaller sizes please see previous pages, for larger sizes please see following pages.



Order No. d l c Dia.Over Grooves

Hole Sizemin.

Hole Sizemax.



P1209.06-60 6,0 60 0,80 6,30 5,93 6,0 22,8P1209.08-10 8,0 10 1,00 8,30 7,91 8,0 40,5P1209.08-12 8,0 12 1,00 8,30 7,91 8,0 40,5P1209.08-14 8,0 14 1,00 8,30 7,91 8,0 40,5P1209.08-16 8,0 16 1,00 8,30 7,91 8,0 40,5P1209.08-18 8,0 18 1,00 8,30 7,91 8,0 40,5P1209.08-20 8,0 20 1,00 8,30 7,91 8,0 40,5P1209.08-24 8,0 24 1,00 8,30 7,91 8,0 40,5P1209.08-26 8,0 26 1,00 8,30 7,91 8,0 40,5P1209.08-28 8,0 28 1,00 8,30 7,91 8,0 40,5P1209.08-30 8,0 30 1,00 8,30 7,91 8,0 40,5P1209.08-32 8,0 32 1,00 8,30 7,91 8,0 40,5P1209.08-36 8,0 36 1,00 8,30 7,91 8,0 40,5P1209.08-40 8,0 40 1,00 8,30 7,91 8,0 40,5P1209.08-45 8,0 45 1,00 8,30 7,91 8,0 40,5P1209.08-50 8,0 50 1,00 8,30 7,91 8,0 40,5P1209.08-55 8,0 55 1,00 8,30 7,91 8,0 40,5P1209.08-60 8,0 60 1,00 8,30 7,91 8,0 40,5P1209.08-65 8,0 65 1,00 8,30 7,91 8,0 40,5P1209.08-70 8,0 70 1,00 8,30 7,91 8,0 40,5

PINS & WASHERS



Sold in packs of 10.For smaller sizes please see previous pages.




Hole Sizemin.

Hole Sizemax.


P1209.10-14 10,0 14 1,20 10,35 9,91 10,0 63,2P1209.10-16 10,0 16 1,20 10,35 9,91 10,0 63,2P1209.10-18 10,0 18 1,20 10,35 9,91 10,0 63,2P1209.10-20 10,0 20 1,20 10,35 9,91 10,0 63,2P1209.10-24 10,0 24 1,20 10,35 9,91 10,0 63,2P1209.10-26 10,0 26 1,20 10,35 9,91 10,0 63,2P1209.10-28 10,0 28 1,20 10,35 9,91 10,0 63,2P1209.10-30 10,0 30 1,20 10,35 9,91 10,0 63,2P1209.10-32 10,0 32 1,20 10,35 9,91 10,0 63,2P1209.10-36 10,0 36 1,20 10,35 9,91 10,0 63,2P1209.10-40 10,0 40 1,20 10,35 9,91 10,0 63,2P1209.10-45 10,0 45 1,20 10,35 9,91 10,0 63,2P1209.10-50 10,0 50 1,20 10,35 9,91 10,0 63,2P1209.10-55 10,0 55 1,20 10,35 9,91 10,0 63,2P1209.10-60 10,0 60 1,20 10,35 9,91 10,0 63,2P1209.10-65 10,0 65 1,20 10,35 9,91 10,0 63,2P1209.10-70 10,0 70 1,20 10,35 9,91 10,0 63,2P1209.10-75 10,0 75 1,20 10,35 9,91 10,0 63,2P1209.10-80 10,0 80 1,20 10,35 9,91 10,0 63,2

P1209.12-14 12,0 14 1,60 12,35 11,89 12,0 91P1209.12-16 12,0 16 1,60 12,35 11,89 12,0 91P1209.12-18 12,0 18 1,60 12,35 11,89 12,0 91P1209.12-20 12,0 20 1,60 12,35 11,89 12,0 91P1209.12-24 12,0 24 1,60 12,35 11,89 12,0 91P1209.12-26 12,0 26 1,60 12,35 11,89 12,0 91P1209.12-28 12,0 28 1,60 12,35 11,89 12,0 91P1209.12-30 12,0 30 1,60 12,35 11,89 12,0 91P1209.12-32 12,0 32 1,60 12,35 11,89 12,0 91P1209.12-36 12,0 36 1,60 12,35 11,89 12,0 91P1209.12-40 12,0 40 1,60 12,35 11,89 12,0 91P1209.12-45 12,0 45 1,60 12,35 11,89 12,0 91P1209.12-50 12,0 50 1,60 12,35 11,89 12,0 91P1209.12-55 12,0 55 1,60 12,35 11,89 12,0 91P1209.12-60 12,0 60 1,60 12,35 11,89 12,0 91P1209.12-65 12,0 65 1,60 12,35 11,89 12,0 91P1209.12-70 12,0 70 1,60 12,35 11,89 12,0 91P1209.12-75 12,0 75 1,60 12,35 11,89 12,0 91P1209.12-80 12,0 80 1,60 12,35 11,89 12,0 91

PINS & WASHERS

P1232MaterialCarbon steel CS70 hardened and tempered to HV420-545, equivalent to DIN 17222 C67 or AISI 1070.

Technical NotesTo ISO 8750, DIN 7343.These units have an expanded diameter slightly larger than the hole for which they are designed, holding themselves in by radial tension on the hole.Length tolerances:-1-10mm long - ±0,2512-50mm long - ±0,50over 50mm long - ±0,75


TipsConsists of 2 1/4 coils of steel and have swaged chamfers at each end.They are designed for plain drilled holes, but countersinking the holes makes insertion easier.

Important NotesImproves shock absorption. Easy assembly.

Spirol Spring Pins - carbon steelISO 8750, DIN 7343

Order No. D lExp.dia.min.

Exp.dia.max.

Hole sizemin.

Hole sizemax.


P1232.01,5-05 1,5 5 1,62 1,73 1,50 1,60 1,45P1232.01,5-06 1,5 6 1,62 1,73 1,50 1,60 1,45P1232.01,5-08 1,5 8 1,62 1,73 1,50 1,60 1,45P1232.01,5-10 1,5 10 1,62 1,73 1,50 1,60 1,45P1232.01,5-12 1,5 12 1,62 1,73 1,50 1,60 1,45P1232.01,5-14 1,5 14 1,62 1,73 1,50 1,60 1,45P1232.01,5-16 1,5 16 1,62 1,73 1,50 1,60 1,45

P1232.02-06 2,0 6 2,13 2,25 1,99 2,10 2,5P1232.02-08 2,0 8 2,13 2,25 1,99 2,10 2,5P1232.02-10 2,0 10 2,13 2,25 1,99 2,10 2,5P1232.02-12 2,0 12 2,13 2,25 1,99 2,10 2,5P1232.02-14 2,0 14 2,13 2,25 1,99 2,10 2,5P1232.02-16 2,0 16 2,13 2,25 1,99 2,10 2,5P1232.02-18 2,0 18 2,13 2,25 1,99 2,10 2,5P1232.02-20 2,0 20 2,13 2,25 1,99 2,10 2,5

P1232.02,5-08 2,5 8 2,65 2,78 2,49 2,60 3,9P1232.02,5-10 2,5 10 2,65 2,78 2,49 2,60 3,9P1232.02,5-12 2,5 12 2,65 2,78 2,49 2,60 3,9P1232.02,5-14 2,5 14 2,65 2,78 2,49 2,60 3,9P1232.02,5-16 2,5 16 2,65 2,78 2,49 2,60 3,9P1232.02,5-18 2,5 18 2,65 2,78 2,49 2,60 3,9P1232.02,5-20 2,5 20 2,65 2,78 2,49 2,60 3,9P1232.02,5-22 2,5 22 2,65 2,78 2,49 2,60 3,9P1232.02,5-24 2,5 24 2,65 2,78 2,49 2,60 3,9

P1232.03-08 3,0 8 3,15 3,30 2,99 3,10 5,5P1232.03-10 3,0 10 3,15 3,30 2,99 3,10 5,5P1232.03-12 3,0 12 3,15 3,30 2,99 3,10 5,5P1232.03-14 3,0 14 3,15 3,30 2,99 3,10 5,5P1232.03-16 3,0 16 3,15 3,30 2,99 3,10 5,5P1232.03-18 3,0 18 3,15 3,30 2,99 3,10 5,5P1232.03-20 3,0 20 3,15 3,30 2,99 3,10 5,5P1232.03-22 3,0 22 3,15 3,30 2,99 3,10 5,5P1232.03-24 3,0 24 3,15 3,30 2,99 3,10 5,5P1232.03-26 3,0 26 3,15 3,30 2,99 3,10 5,5P1232.03-28 3,0 28 3,15 3,30 2,99 3,10 5,5P1232.03-30 3,0 30 3,15 3,30 2,99 3,10 5,5

P1232.03,5-12 3,5 12 3,67 3,84 3,48 3,50 7,5P1232.03,5-14 3,5 14 3,67 3,84 3,48 3,50 7,5P1232.03,5-16 3,5 16 3,67 3,84 3,48 3,50 7,5P1232.03,5-18 3,5 18 3,67 3,84 3,48 3,50 7,5P1232.03,5-20 3,5 20 3,67 3,84 3,48 3,50 7,5P1232.03,5-22 3,5 22 3,67 3,84 3,48 3,50 7,5P1232.03,5-24 3,5 24 3,67 3,84 3,48 3,50 7,5P1232.03,5-26 3,5 26 3,67 3,84 3,48 3,50 7,5P1232.03,5-28 3,5 28 3,67 3,84 3,48 3,50 7,5P1232.03,5-30 3,5 30 3,67 3,84 3,48 3,50 7,5P1232.03,5-35 3,5 35 3,67 3,84 3,48 3,50 7,5

PINS

& W

ASHE

RS







Order No. D lExp.dia.min.

Exp.dia.max.

Hole sizemin.

Hole sizemax.


P1232.04-12 4,0 12 4,20 4,40 3,98 4,00 9,6P1232.04-14 4,0 14 4,20 4,40 3,98 4,00 9,6P1232.04-16 4,0 16 4,20 4,40 3,98 4,00 9,6P1232.04-18 4,0 18 4,20 4,40 3,98 4,00 9,6P1232.04-20 4,0 20 4,20 4,40 3,98 4,00 9,6P1232.04-22 4,0 22 4,20 4,40 3,98 4,00 9,6P1232.04-24 4,0 24 4,20 4,40 3,98 4,00 9,6P1232.04-26 4,0 26 4,20 4,40 3,98 4,00 9,6P1232.04-28 4,0 28 4,20 4,40 3,98 4,00 9,6P1232.04-30 4,0 30 4,20 4,40 3,98 4,00 9,6P1232.04-35 4,0 35 4,20 4,40 3,98 4,00 9,6P1232.04-40 4,0 40 4,20 4,40 3,98 4,00 9,6

P1232.05-14 5,0 14 5,25 5,50 4,95 5,00 15,0P1232.05-16 5,0 16 5,25 5,50 4,95 5,00 15,0P1232.05-18 5,0 18 5,25 5,50 4,95 5,00 15,0P1232.05-20 5,0 20 5,25 5,50 4,95 5,00 15,0P1232.05-22 5,0 22 5,25 5,50 4,95 5,00 15,0P1232.05-24 5,0 24 5,25 5,50 4,95 5,00 15,0P1232.05-26 5,0 26 5,25 5,50 4,95 5,00 15,0P1232.05-28 5,0 28 5,25 5,50 4,95 5,00 15,0P1232.05-30 5,0 30 5,25 5,50 4,95 5,00 15,0P1232.05-35 5,0 35 5,25 5,50 4,95 5,00 15,0P1232.05-40 5,0 40 5,25 5,50 4,95 5,00 15,0P1232.05-45 5,0 45 5,25 5,50 4,95 5,00 15,0

P1232.06-16 6,0 16 6,25 5,60 5,95 6,00 22,0P1232.06-18 6,0 18 6,25 5,60 5,95 6,00 22,0P1232.06-20 6,0 20 6,25 5,60 5,95 6,00 22,0P1232.06-22 6,0 22 6,25 5,60 5,95 6,00 22,0P1232.06-24 6,0 24 6,25 5,60 5,95 6,00 22,0P1232.06-26 6,0 26 6,25 5,60 5,95 6,00 22,0P1232.06-28 6,0 28 6,25 5,60 5,95 6,00 22,0P1232.06-30 6,0 30 6,25 5,60 5,95 6,00 22,0P1232.06-35 6,0 35 6,25 5,60 5,95 6,00 22,0P1232.06-40 6,0 40 6,25 5,60 5,95 6,00 22,0P1232.06-45 6,0 45 6,25 5,60 5,95 6,00 22,0P1232.06-50 6,0 50 6,25 5,60 5,95 6,00 22,0

P1232.08-20 8,0 20 8,30 8,60 7,93 8,00 39,0P1232.08-22 8,0 22 8,30 8,60 7,93 8,00 39,0P1232.08-24 8,0 24 8,30 8,60 7,93 8,00 39,0P1232.08-26 8,0 26 8,30 8,60 7,93 8,00 39,0P1232.08-28 8,0 28 8,30 8,60 7,93 8,00 39,0P1232.08-30 8,0 30 8,30 8,60 7,93 8,00 39,0P1232.08-35 8,0 35 8,30 8,60 7,93 8,00 39,0P1232.08-40 8,0 40 8,30 8,60 7,93 8,00 39,0P1232.08-45 8,0 45 8,30 8,60 7,93 8,00 39,0P1232.08-50 8,0 50 8,30 8,60 7,93 8,00 39,0

PINS & WASHERS







Order No. D lExp.dia.min

Exp.dia.max.

Hole sizemin.

Hole sizemax.


P1232.08-50 8,0 50 8,30 8,60 7,93 8,00 39,0P1232.08-55 8,0 55 8,30 8,60 7,93 8,00 39,0P1232.08-60 8,0 60 8,30 8,60 7,93 8,00 39,0P1232.08-65 8,0 65 8,30 8,60 7,93 8,00 39,0P1232.08-70 8,0 70 8,30 8,60 7,93 8,00 39,0P1232.08-75 8,0 75 8,30 8,60 7,93 8,00 39,0

P1232.10-24 10,0 24 10,35 10,80 9,93 10,00 62,0P1232.10-26 10,0 26 10,35 10,80 9,93 10,00 62,0P1232.10-28 10,0 28 10,35 10,80 9,93 10,00 62,0P1232.10-30 10,0 30 10,35 10,80 9,93 10,00 62,0P1232.10-35 10,0 35 10,35 10,80 9,93 10,00 62,0P1232.10-40 10,0 40 10,35 10,80 9,93 10,00 62,0P1232.10-45 10,0 45 10,35 10,80 9,93 10,00 62,0P1232.10-50 10,0 50 10,35 10,80 9,93 10,00 62,0P1232.10-55 10,0 55 10,35 10,80 9,93 10,00 62,0P1232.10-60 10,0 60 10,35 10,80 9,93 10,00 62,0P1232.10-65 10,0 65 10,35 10,80 9,93 10,00 62,0P1232.10-70 10,0 70 10,35 10,80 9,93 10,00 62,0P1232.10-75 10,0 75 10,35 10,80 9,93 10,00 62,0P1232.10-80 10,0 80 10,35 10,80 9,93 10,00 62,0P1232.10-85 10,0 85 10,35 10,80 9,93 10,00 62,0

P1232.12-28 12,0 28 12,40 12,85 11,90 12,00 89,0P1232.12-30 12,0 30 12,40 12,85 11,90 12,00 89,0P1232.12-35 12,0 35 12,40 12,85 11,90 12,00 89,0P1232.12-40 12,0 40 12,40 12,85 11,90 12,00 89,0P1232.12-45 12,0 45 12,40 12,85 11,90 12,00 89,0P1232.12-50 12,0 50 12,40 12,85 11,90 12,00 89,0P1232.12-55 12,0 55 12,40 12,85 11,90 12,00 89,0P1232.12-60 12,0 60 12,40 12,85 11,90 12,00 89,0P1232.12-65 12,0 65 12,40 12,85 11,90 12,00 89,0P1232.12-70 12,0 70 12,40 12,85 11,90 12,00 89,0P1232.12-75 12,0 75 12,40 12,85 11,90 12,00 89,0P1232.12-80 12,0 80 12,40 12,85 11,90 12,00 89,0P1232.12-85 12,0 85 12,40 12,85 11,90 12,00 89,0P1232.12-90 12,0 90 12,40 12,85 11,90 12,00 89,0P1232.12-95 12,0 95 12,40 12,85 11,90 12,00 89,0

P1232.12-100 12,0 100 12,40 12,85 11,90 12,00 89,0

PINS

& W

ASHE

RS

P1234MaterialNickel stainless steel 304 - work hardened.


Sold in packs of 10.For larger sizes, please see following pages.



Spirol Spring Pins - stainless steel

Order No.Thread

dLength

lExp.dia.min Exp. dia. max Hole size min. Hole size max.

P1234.0.8-004 0,8 4 0,85 0,91 0,80 0,84P1234.0.8-005 0,8 5 0,85 0,91 0,80 0,84P1234.0.8-006 0,8 6 0,85 0,91 0,80 0,84P1234.0.8-008 0,8 8 0,85 0,91 0,80 0,84P1234.0.8-010 0,8 10 0,85 0,91 0,80 0,84P1234.0.8-012 0,8 12 0,85 0,91 0,80 0,84

P1234.1.0-004 1,0 4 1,05 1,15 1,00 1,04P1234.1.0-005 1,0 5 1,05 1,15 1,00 1,04P1234.1.0-006 1,0 6 1,05 1,15 1,00 1,04P1234.1.0-008 1,0 8 1,05 1,15 1,00 1,04P1234.1.0-010 1,0 10 1,05 1,15 1,00 1,04P1234.1.0-012 1,0 12 1,05 1,15 1,00 1,04

P1234.1.2-004 1,2 4 1,25 1,35 1,20 1,24P1234.1.2-005 1,2 5 1,25 1,35 1,20 1,24P1234.1.2-006 1,2 6 1,25 1,35 1,20 1,24P1234.1.2-008 1,2 8 1,25 1,35 1,20 1,24P1234.1.2-010 1,2 10 1,25 1,35 1,20 1,24P1234.1.2-012 1,2 12 1,25 1,35 1,20 1,24

P1234.1.5-005 1,5 5 1,62 1,73 1,50 1,60P1234.1.5-006 1,5 6 1,62 1,73 1,50 1,60P1234.1.5-008 1,5 8 1,62 1,73 1,50 1,60P1234.1.5-010 1,5 10 1,62 1,73 1,50 1,60P1234.1.5-012 1,5 12 1,62 1,73 1,50 1,60P1234.1.5-014 1,5 14 1,62 1,73 1,50 1,60P1234.1.5-016 1,5 16 1,62 1,73 1,50 1,60

P1234.2.0-006 2,0 6 2,13 2,25 1,99 2,10P1234.2.0-008 2,0 8 2,13 2,25 1,99 2,10P1234.2.0-010 2,0 10 2,13 2,25 1,99 2,10P1234.2.0-012 2,0 12 2,13 2,25 1,99 2,10P1234.2.0-014 2,0 14 2,13 2,25 1,99 2,10P1234.2.0-016 2,0 16 2,13 2,25 1,99 2,10P1234.2.0-018 2,0 18 2,13 2,25 1,99 2,10P1234.2.0-020 2,0 20 2,13 2,25 1,99 2,10

P1234.2.5-008 2,5 8 2,65 2,78 2,49 2,60P1234.2.5-010 2,5 10 2,65 2,78 2,49 2,60P1234.2.5-012 2,5 12 2,65 2,78 2,49 2,60P1234.2.5-014 2,5 14 2,65 2,78 2,49 2,60P1234.2.5-016 2,5 16 2,65 2,78 2,49 2,60P1234.2.5-018 2,5 18 2,65 2,78 2,49 2,60P1234.2.5-020 2,5 20 2,65 2,78 2,49 2,60P1234.2.5-022 2,5 22 2,65 2,78 2,49 2,60P1234.2.5-024 2,5 24 2,65 2,78 2,49 2,60

PINS & WASHERS



Sold in packs of 10.For smaller sizes, please see previous pages.For larger sizes, please see following pages.




Order No.Thread

dLength


P1234.3.0-008 3,0 8 3,15 3,30 2,99 3,10P1234.3.0-010 3,0 10 3,15 3,30 2,99 3,10P1234.3.0-012 3,0 12 3,15 3,30 2,99 3,10P1234.3.0-014 3,0 14 3,15 3,30 2,99 3,10P1234.3.0-016 3,0 16 3,15 3,30 2,99 3,10P1234.3.0-018 3,0 18 3,15 3,30 2,99 3,10P1234.3.0-020 3,0 20 3,15 3,30 2,99 3,10P1234.3.0-022 3,0 22 3,15 3,30 2,99 3,10P1234.3.0-024 3,0 24 3,15 3,30 2,99 3,10P1234.3.0-026 3,0 26 3,15 3,30 2,99 3,10P1234.3.0-028 3,0 28 3,15 3,30 2,99 3,10P1234.3.0-030 3,0 30 3,15 3,30 2,99 3,10

P1234.3.5-012 3,5 12 3,67 3,84 3,48 3,62P1234.3.5-014 3,5 14 3,67 3,84 3,48 3,62P1234.3.5-016 3,5 16 3,67 3,84 3,48 3,62P1234.3.5-018 3,5 18 3,67 3,84 3,48 3,62P1234.3.5-020 3,5 20 3,67 3,84 3,48 3,62P1234.3.5-022 3,5 22 3,67 3,84 3,48 3,62P1234.3.5-024 3,5 24 3,67 3,84 3,48 3,62P1234.3.5-026 3,5 26 3,67 3,84 3,48 3,62P1234.3.5-028 3,5 28 3,67 3,84 3,48 3,62P1234.3.5-030 3,5 30 3,67 3,84 3,48 3,62P1234.3.5-035 3,5 35 3,67 3,84 3,48 3,62

P1234.4.0-012 4,0 12 4,20 4,40 3,98 4,12P1234.4.0-014 4,0 14 4,20 4,40 3,98 4,12P1234.4.0-016 4,0 16 4,20 4,40 3,98 4,12P1234.4.0-018 4,0 18 4,20 4,40 3,98 4,12P1234.4.0-020 4,0 20 4,20 4,40 3,98 4,12P1234.4.0-022 4,0 22 4,20 4,40 3,98 4,12P1234.4.0-024 4,0 24 4,20 4,40 3,98 4,12P1234.4.0-026 4,0 26 4,20 4,40 3,98 4,12P1234.4.0-028 4,0 28 4,20 4,40 3,98 4,12P1234.4.0-030 4,0 30 4,20 4,40 3,98 4,12P1234.4.0-035 4,0 35 4,20 4,40 3,98 4,12P1234.4.0-040 4,0 40 4,20 4,40 3,98 4,12

P1234.5.0-014 5,0 14 5,25 5,50 4,95 5,12P1234.5.0-016 5,0 16 5,25 5,50 4,95 5,12P1234.5.0-018 5,0 18 5,25 5,50 4,95 5,12P1234.5.0-020 5,0 20 5,25 5,50 4,95 5,12P1234.5.0-022 5,0 22 5,25 5,50 4,95 5,12P1234.5.0-024 5,0 24 5,25 5,50 4,95 5,12P1234.5.0-026 5,0 26 5,25 5,50 4,95 5,12P1234.5.0-028 5,0 28 5,25 5,50 4,95 5,12P1234.5.0-030 5,0 30 5,25 5,50 4,95 5,12P1234.5.0-035 5,0 35 5,25 5,50 4,95 5,12P1234.5.0-040 5,0 40 5,25 5,50 4,95 5,12P1234.5.0-045 5,0 45 5,25 5,50 4,95 5,12

PINS

& W

ASHE

RS



Sold in packs of 10.For larger sizes, please see previous pages.For smaller sizes, please see previous pages.




Order No.Thread

dLength


P1234.6.0-016 6,0 16 6,25 5,60 5,95 6,13P1234.6.0-018 6,0 18 6,25 5,60 5,95 6,13P1234.6.0-020 6,0 20 6,25 5,60 5,95 6,13P1234.6.0-022 6,0 22 6,25 5,60 5,95 6,13P1234.6.0-024 6,0 24 6,25 5,60 5,95 6,13P1234.6.0-026 6,0 26 6,25 5,60 5,95 6,13P1234.6.0-028 6,0 28 6,25 5,60 5,95 6,13P1234.6.0-030 6,0 30 6,25 5,60 5,95 6,13P1234.6.0-035 6,0 35 6,25 5,60 5,95 6,13P1234.6.0-040 6,0 40 6,25 5,60 5,95 6,13P1234.6.0-045 6,0 45 6,25 5,60 5,95 6,13P1234.6.0-050 6,0 50 6,25 5,60 5,95 6,13

P1234.8.0-020 8,0 20 8,30 8,60 7,93 8,17P1234.8.0-022 8,0 22 8,30 8,60 7,93 8,17P1234.8.0-024 8,0 24 8,30 8,60 7,93 8,17P1234.8.0-026 8,0 26 8,30 8,60 7,93 8,17P1234.8.0-028 8,0 28 8,30 8,60 7,93 8,17P1234.8.0-030 8,0 30 8,30 8,60 7,93 8,17P1234.8.0-035 8,0 35 8,30 8,60 7,93 8,17P1234.8.0-040 8,0 40 8,30 8,60 7,93 8,17P1234.8.0-045 8,0 45 8,30 8,60 7,93 8,17P1234.8.0-050 8,0 50 8,30 8,60 7,93 8,17P1234.8.0-055 8,0 55 8,30 8,60 7,93 8,17P1234.8.0-060 8,0 60 8,30 8,60 7,93 8,17P1234.8.0-065 8,0 65 8,30 8,60 7,93 8,17P1234.8.0-070 8,0 70 8,30 8,60 7,93 8,17P1234.8.0-075 8,0 75 8,30 8,60 7,93 8,17


PINS & WASHERS



Sold in packs of 10.For smaller sizes, please see previous pages.




Order No.Thread

dLength



P1234.12.0-0100 12,0 100 12,40 12,85 11,90 12,22

PINS

& W

ASHE

RS

P1240MaterialMild steel.

Technical NotesTo DIN 94.

Sold in packs of 10.For larger sizes, please see following pages.

Split Cotter Pins - mild steelDIN 94

Order No. Nom. Dia. l d1 min. d1 max. a min. a max.

P1240.01-06 1 6 0,8 0,9 0,8 1,6P1240.01-08 1 8 0,8 0,9 0,8 1,6P1240.01-10 1 10 0,8 0,9 0,8 1,6P1240.01-12 1 12 0,8 0,9 0,8 1,6P1240.01-16 1 16 0,8 0,9 0,8 1,6P1240.01-18 1 18 0,8 0,9 0,8 1,6P1240.01-20 1 20 0,8 0,9 0,8 1,6P1240.01-22 1 22 0,8 0,9 0,8 1,6P1240.01-25 1 25 0,8 0,9 0,8 1,6P1240.01-28 1 28 0,8 0,9 0,8 1,6P1240.01-32 1 32 0,8 0,9 0,8 1,6P1240.01-36 1 36 0,8 0,9 0,8 1,6

P1240.01,2-10 1,2 10 1 1.09 1,25 2,5P1240.01,2-12 1,2 12 1 1.09 1,25 2,5P1240.01,2-16 1,2 16 1 1.09 1,25 2,5P1240.01,2-18 1,2 18 1 1.09 1,25 2,5P1240.01,2-20 1,2 20 1 1.09 1,25 2,5P1240.01,2-22 1,2 22 1 1.09 1,25 2,5P1240.01,2-25 1,2 25 1 1.09 1,25 2,5P1240.01,2-28 1,2 28 1 1.09 1,25 2,5P1240.01,2-32 1,2 32 1 1.09 1,25 2,5P1240.01,2-36 1,2 36 1 1.09 1,25 2,5

P1240.01,6-10 1,6 10 1,3 1,4 1,25 2,5P1240.01,6-12 1,6 12 1,3 1,4 1,25 2,5P1240.01,6-16 1,6 16 1,3 1,4 1,25 2,5P1240.01,6-18 1,6 18 1,3 1,4 1,25 2,5P1240.01,6-20 1,6 20 1,3 1,4 1,25 2,5P1240.01,6-22 1,6 22 1,3 1,4 1,25 2,5P1240.01,6-25 1,6 25 1,3 1,4 1,25 2,5P1240.01,6-28 1,6 28 1,3 1,4 1,25 2,5P1240.01,6-32 1,6 32 1,3 1,4 1,25 2,5P1240.01,6-36 1,6 36 1,3 1,4 1,25 2,5P1240.01,6-40 1,6 40 1,3 1,4 1,25 2,5

P1240.02-10 2 10 1,7 1,8 1,25 2,5P1240.02-12 2 12 1,7 1,8 1,25 2,5P1240.02-16 2 16 1,7 1,8 1,25 2,5P1240.02-18 2 18 1,7 1,8 1,25 2,5P1240.02-20 2 20 1,7 1,8 1,25 2,5P1240.02-22 2 22 1,7 1,8 1,25 2,5P1240.02-25 2 25 1,7 1,8 1,25 2,5P1240.02-28 2 28 1,7 1,8 1,25 2,5P1240.02-32 2 32 1,7 1,8 1,25 2,5P1240.02-36 2 36 1,7 1,8 1,25 2,5P1240.02-40 2 40 1,7 1,8 1,25 2,5P1240.02-45 2 45 1,7 1,8 1,25 2,5P1240.02-50 2 50 1,7 1,8 1,25 2,5

PINS & WASHERS



Sold in packs of 10.For smaller sizes please see previous pages. For larger sizes, please see following pages.

Split Cotter Pins - mild steel


P1240.02,5-10 2,5 10 2,1 2,3 1,25 2,5P1240.02,5-12 2,5 12 2,1 2,3 1,25 2,5P1240.02,5-16 2,5 16 2,1 2,3 1,25 2,5P1240.02,5-18 2,5 18 2,1 2,3 1,25 2,5P1240.02,5-20 2,5 20 2,1 2,3 1,25 2,5P1240.02,5-22 2,5 22 2,1 2,3 1,25 2,5P1240.02,5-25 2,5 25 2,1 2,3 1,25 2,5P1240.02,5-28 2,5 28 2,1 2,3 1,25 2,5P1240.02,5-32 2,5 32 2,1 2,3 1,25 2,5P1240.02,5-36 2,5 36 2,1 2,3 1,25 2,5P1240.02,5-40 2,5 40 2,1 2,3 1,25 2,5P1240.02,5-45 2,5 45 2,1 2,3 1,25 2,5P1240.02,5-50 2,5 50 2,1 2,3 1,25 2,5P1240.02,5-56 2,5 56 2,1 2,3 1,25 2,5P1240.02,5-63 2,5 63 2,1 2,3 1,25 2,5P1240.02,5-71 2,5 71 2,1 2,3 1,25 2,5

P1240.03,2-16 3,2 16 2,7 2,9 1,6 3,2P1240.03,2-18 3,2 18 2,7 2,9 1,6 3,2P1240.03,2-20 3,2 20 2,7 2,9 1,6 3,2P1240.03,2-22 3,2 22 2,7 2,9 1,6 3,2P1240.03,2-25 3,2 25 2,7 2,9 1,6 3,2P1240.03,2-28 3,2 28 2,7 2,9 1,6 3,2P1240.03,2-33 3,2 33 2,7 2,9 1,6 3,2P1240.03,2-36 3,2 36 2,7 2,9 1,6 3,2P1240.03,2-40 3,2 40 2,7 2,9 1,6 3,2P1240.03,2-45 3,2 45 2,7 2,9 1,6 3,2P1240.03,2-50 3,2 50 2,7 2,9 1,6 3,2P1240.03,2-56 3,2 56 2,7 2,9 1,6 3,2P1240.03,2-63 3,2 63 2,7 2,9 1,6 3,2P1240.03,2-71 3,2 71 2,7 2,9 1,6 3,2

P1240.04-16 4 16 3,5 3,7 2 4P1240.04-18 4 18 3,5 3,7 2 4P1240.04-20 4 20 3,5 3,7 2 4P1240.04-22 4 22 3,5 3,7 2 4P1240.04-25 4 25 3,5 3,7 2 4P1240.04-28 4 28 3,5 3,7 2 4P1240.04-32 4 32 3,5 3,7 2 4P1240.04-36 4 36 3,5 3,7 2 4P1240.04-40 4 40 3,5 3,7 2 4P1240.04-45 4 45 3,5 3,7 2 4P1240.04-50 4 50 3,5 3,7 2 4P1240.04-56 4 56 3,5 3,7 2 4P1240.04-63 4 63 3,5 3,7 2 4P1240.04-71 4 71 3,5 3,7 2 4P1240.04-80 4 80 3,5 3,7 2 4P1240.04-90 4 90 3,5 3,7 2 4

P1240.04-112 4 112 3,5 3,7 2 4P1240.04-125 4 125 3,5 3,7 2 4

PINS

& W

ASHE

RS



Sold in packs of 10.For smaller sizes please see previous pages. For larger sizes, please see following pages.




P1240.05-112 5 112 4,4 4,6 2 4P1240.05-125 5 125 4,4 4,6 2 4

P1240.06,3-20 6 20 5,7 5,9 2 4P1240.06,3-22 6 22 5,7 5,9 2 4P1240.06,3-26 6 26 5,7 5,9 2 4P1240.06,3-28 6 28 5,7 5,9 2 4P1240.06,3-32 6 32 5,7 5,9 2 4P1240.06,3-36 6 36 5,7 5,9 2 4P1240.06,3-40 6 40 5,7 5,9 2 4P1240.06,3-45 6 45 5,7 5,9 2 4P1240.06,3-50 6 50 5,7 5,9 2 4P1240.06,3-56 6 56 5,7 5,9 2 4P1240.06,3-63 6 63 5,7 5,9 2 4P1240.06,3-71 6 71 5,7 5,9 2 4P1240.06,3-80 6 80 5,7 5,9 2 4P1240.06,3-90 6 90 5,7 5,9 2 4

P1240.06,3-112 6 112 5,7 5,9 2 4P1240.06,3-125 6 125 5,7 5,9 2 4P1240.06,3-140 6 140 5,7 5,9 2 4

P1240.08-32 8 32 7,3 7,5 2 4P1240.08-36 8 36 7,3 7,5 2 4P1240.08-40 8 40 7,3 7,5 2 4P1240.08-45 8 45 7,3 7,5 2 4P1240.08-50 8 50 7,3 7,5 2 4P1240.08-56 8 56 7,3 7,5 2 4P1240.08-63 8 63 7,3 7,5 2 4P1240.08-71 8 71 7,3 7,5 2 4P1240.08-80 8 80 7,3 7,5 2 4P1240.08-90 8 90 7,3 7,5 2 4

P1240.08-112 8 112 7,3 7,5 2 4P1240.08-125 8 125 7,3 7,5 2 4P1240.08-140 8 140 7,3 7,5 2 4P1240.08-160 8 160 7,3 7,5 2 4

PINS & WASHERS



Sold in packs of 10.For smaller sizes please see previous pages.



P1240.10-32 10 32 9,3 9,5 3,2 6,3P1240.10-36 10 36 9,3 9,5 3,2 6,3P1240.10-40 10 40 9,3 9,5 3,2 6,3P1240.10-45 10 45 9,3 9,5 3,2 6,3P1240.10-50 10 50 9,3 9,5 3,2 6,3P1240.10-56 10 56 9,3 9,5 3,2 6,3P1240.10-63 10 63 9,3 9,5 3,2 6,3P1240.10-71 10 71 9,3 9,5 3,2 6,3P1240.10-80 10 80 9,3 9,5 3,2 6,3P1240.10-90 10 90 9,3 9,5 3,2 6,3

P1240.10-112 10 112 9,3 9,5 3,2 6,3P1240.10-125 10 125 9,3 9,5 3,2 6,3P1240.10-140 10 140 9,3 9,5 3,2 6,3P1240.10-160 10 160 9,3 9,5 3,2 6,3

P1240.12-45 12 45 12,1 12,4 3,2 6,3P1240.12-50 12 50 12,1 12,4 3,2 6,3P1240.12-56 12 56 12,1 12,4 3,2 6,3P1240.12-63 12 63 12,1 12,4 3,2 6,3P1240.12-71 12 71 12,1 12,4 3,2 6,3P1240.12-80 12 80 12,1 12,4 3,2 6,3P1240.12-90 12 90 12,1 12,4 3,2 6,3

P1240.12-112 12 112 12,1 12,4 3,2 6,3P1240.12-125 12 125 12,1 12,4 3,2 6,3P1240.12-140 12 140 12,1 12,4 3,2 6,3P1240.12-160 12 160 12,1 12,4 3,2 6,3

PINS

& W

ASHE

RS

P1241MaterialStainless steel A2, WS 1,4301.

Technical NotesTo DIN 94.Equivalent to ISO 1234.


Split Cotter Pins - stainless steel

Order No. Nom. dia. l d1 min. d1 max. a min. a max.

P1241.01-06 1 6 0,8 0,9 0,8 1,6P1241.01-08 1 8 0,8 0,9 0,8 1,6P1241.01-10 1 10 0,8 0,9 0,8 1,6P1241.01-12 1 12 0,8 0,9 0,8 1,6P1241.01-16 1 16 0,8 0,9 0,8 1,6P1241.01-18 1 18 0,8 0,9 0,8 1,6P1241.01-20 1 20 0,8 0,9 0,8 1,6P1241.01-22 1 22 0,8 0,9 0,8 1,6P1241.01-25 1 25 0,8 0,9 0,8 1,6P1241.01-28 1 28 0,8 0,9 0,8 1,6P1241.01-32 1 32 0,8 1,6 0,8 1,6P1241.01-36 1 36 0,8 0,9 0,8 1,6

P1241.01,2-10 1,2 10 1 1,09 1,25 2,5P1241.01,2-12 1,2 12 1 1,09 1,25 2,5P1241.01,2-16 1,2 16 1 1,09 1,25 2,5P1241.01,2-18 1,2 18 1 1,09 1,25 2,5P1241.01,2-20 1,2 20 1 1,09 1,25 2,5P1241.01,2-22 1,2 22 1 1,09 1,25 2,5P1241.01,2-25 1,2 25 1 1,09 1,25 2,5P1241.01,2-28 1,2 28 1 1,09 1,25 2,5P1241.01,2-32 1,2 32 1 1,09 1,25 2,5P1241.01,2-36 1,2 36 1 1,09 1,25 2,5

P1241.01,6-10 1,6 10 1,3 1,4 1,25 2,5P1241.01,6-12 1,6 12 1,3 1,4 1,25 2,5P1241.01,6-16 1,6 16 1,3 1,4 1,25 2,5P1241.01,6-18 1,6 18 1,3 1,4 1,25 2,5P1241.01,6-20 1,6 20 1,3 1,4 1,25 2,5P1241.01,6-22 1,6 22 1,3 1,4 1,25 2,5P1241.01,6-25 1,6 25 1,3 1,4 1,25 2,5P1241.01,6-28 1,6 28 1,3 1,4 1,25 2,5P1241.01,6-32 1,6 32 1,3 1,4 1,25 2,5P1241.01,6-36 1,6 36 1,3 1,4 1,25 2,5P1241.01,6-40 1,6 40 1,3 1,4 1,25 2,5

P1241.02-10 2 10 1,7 1,8 1,25 2,5P1241.02-12 2 12 1,7 1,8 1,25 2,5P1241.02-16 2 16 1,7 1,8 1,25 2,5P1241.02-18 2 18 1,7 1,8 1,25 2,5P1241.02-20 2 20 1,7 1,8 1,25 2,5P1241.02-22 2 22 1,7 1,8 1,25 2,5P1241.02-25 2 25 1,7 1,8 1,25 2,5P1241.02-28 2 28 1,7 1,8 1,25 2,5P1241.02-32 2 32 1,7 1,8 1,25 2,5P1241.02-36 2 36 1,7 1,8 1,25 2,5P1241.02-40 2 40 1,7 1,8 1,25 2,5P1241.02-45 2 45 1,7 1,8 1,25 2,5P1241.02-50 2 50 1,7 1,8 1,25 2,5

PINS & WASHERS





Order No. Nom dia. l d1 min. d1 max. a min. a max.

P1241.02,5-10 2,5 10 2,1 2,3 1,25 2,5P1241.02,5-12 2,5 12 2,1 2,3 1,25 2,5P1241.02,5-16 2,5 16 2,1 2,3 1,25 2,5P1241.02,5-18 2,5 18 2,1 2,3 1,25 2,5P1241.02,5-20 2,5 20 2,1 2,3 1,25 2,5P1241.02,5-22 2,5 22 2,1 2,3 1,25 2,5P1241.02,5-25 2,5 25 2,1 2,3 1,25 2,5P1241.02,5-28 2,5 28 2,1 2,3 1,25 2,5P1241.02,5-32 2,5 32 2,1 2,3 1,25 2,5P1241.02,5-38 2,5 38 2,1 2,3 1,25 2,5P1241.02,5-40 2,5 40 2,1 2,3 1,25 2,5P1241.02,5-45 2,5 45 2,1 2,3 1,25 2,5P1241.02,5-50 2,5 50 2,1 2,3 1,25 2,5P1241.02,5-56 2,5 56 2,1 2,3 1,25 2,5P1241.02,5-63 2,5 63 2,1 2,3 1,25 2,5P1241.02,5-71 2,5 71 2,1 2,3 1,25 2,5

P1241.03,2-16 3,2 16 2,7 2,9 1,6 3,2P1241.03,2-18 3,2 18 2,7 2,9 1,6 3,2P1241.03,2-20 3,2 20 2,7 2,9 1,6 3,2P1241.03,2-22 3,2 22 2,7 2,9 1,6 3,2P1241.03,2-26 3,2 26 2,7 2,9 1,6 3,2P1241.03,2-28 3,2 28 2,7 2,9 1,6 3,2P1241.03,2-32 3,2 32 2,7 2,9 1,6 3,2P1241.03,2-36 3,2 36 2,7 2,9 1,6 3,2P1241.03,2-40 3,2 40 2,7 2,9 1,6 3,2P1241.03,2-45 3,2 45 2,7 2,9 1,6 3,2P1241.03,2-50 3,2 50 2,7 2,9 1,6 3,2P1241.03,2-56 3,2 56 2,7 2,9 1,6 3,2P1241.03,2-63 3,2 63 2,7 2,9 1,6 3,2P1241.03,2-71 3,2 71 2,7 2,9 1,6 3,2


P1241.04-112 4 112 3,5 3,7 2 4P1241.04-112 4 125 3,5 3,7 2 4

PINS

& W

ASHE

RS





Order No. Nom. dia. l d1 min. d1 max. a min. a max.


P1241.05-112 5 112 4,4 4,6 2 4P1241.05-125 5 125 4,4 4,6 2 4

P1241.06,3-20 6,3 20 5,7 5,9 2 4P1241.06,3-22 6,3 22 5,7 5,9 2 4P1241.06,3-26 6,3 26 5,7 5,9 2 4P1241.06,3-28 6,3 28 5,7 5,9 2 4P1241.06,3-32 6,3 32 5,7 5,9 2 4P1241.06,3-36 6,3 36 5,7 5,9 2 4P1241.06,3-40 6,3 40 5,7 5,9 2 4P1241.06,3-45 6,3 45 5,7 5,9 2 4P1241.06,3-50 6,3 50 5,7 5,9 2 4P1241.06,3-56 6,3 56 5,7 5,9 2 4P1241.06,3-63 6,3 63 5,7 5,9 2 4P1241.06,3-71 6,3 71 5,7 5,9 2 4P1241.06,3-80 6,3 80 5,7 5,9 2 4P1241.06,3-90 6,3 90 5,7 5,9 2 4

P1241.06,3-112 6,3 112 5,7 5,9 2 4P1241.06,3-125 6,3 125 5,7 5,9 2 4P1241.06,3-140 6,3 140 5,7 5,9 2 4

PINS & WASHERS

P1242MaterialMild steel, zinc plated.To ISO 2341 Form B,DIN1444 type B.

Technical NotesThe nominal length is the total length from under L1 head to the end of the pin.The grip length G1 is [L1 - L2 - (Ad1)].Diameter tolerance h11.Length tolerances:-up to 10mm long - ±0,2512-50mm long - ±0,50over 50mm long - ±0,75


For larger sizes see next page.

TipsFor use with cotter pins.(P1240 or P1241) or retaining pins (P1243).

Clevis PinsDIN 1444 type B

Order No.d

h11L1 G1 H d1 T L2

P1242.05-10 5 10 6,5 8 1,2 1,6 2,9P1242.05-12 5 12 8,5 8 1,2 1,6 2,9P1242.05-16 5 16 12,5 8 1,2 1,6 2,9P1242.05-18 5 18 14,5 8 1,2 1,6 2,9P1242.05-20 5 20 16,5 8 1,2 1,6 2,9P1242.05-22 5 22 18,5 8 1,2 1,6 2,9P1242.05-24 5 24 20,5 8 1,2 1,6 2,9P1242.05-26 5 26 22,5 8 1,2 1,6 2,9P1242.05-28 5 28 24,5 8 1,2 1,6 2,9P1242.05-30 5 30 26,5 8 1,2 1,6 2,9P1242.05-32 5 32 28,5 8 1,2 1,6 2,9P1242.05-35 5 35 31,2 10 1,6 2 3,2P1242.05-40 5 40 36,2 10 1,6 2 3,2P1242.05-45 5 45 41,2 10 1,6 2 3,2P1242.05-50 5 50 46,2 10 1,6 2 3,2

P1242.06-12 6 12 8,2 10 1,6 2 3,2P1242.06-16 6 16 12,2 10 1,6 2 3,2P1242.06-18 6 18 14,2 10 1,6 2 3,2P1242.06-20 6 20 16,2 10 1,6 2 3,2P1242.06-22 6 22 18,2 10 1,6 2 3,2P1242.06-24 6 24 20,2 10 1,6 2 3,2P1242.06-26 6 26 22,2 10 1,6 2 3,2P1242.06-28 6 28 24,2 10 1,6 2 3,2P1242.06-30 6 30 26,2 10 1,6 2 3,2P1242.06-32 6 32 28,2 10 1,6 2 3,2P1242.06-35 6 35 31,2 10 1,6 2 3,2P1242.06-40 6 40 36,2 10 1,6 2 3,2P1242.06-45 6 45 40,5 14 2 3 3,5P1242.06-50 6 50 45,5 14 2 3 3,5P1242.06-55 6 55 50,5 14 2 3 3,5P1242.06-60 6 60 55,5 14 2 3 3,5

P1242.08-16 8 16 11,5 14 2 3 3,5P1242.08-18 8 18 13,5 14 2 3 3,5P1242.08-20 8 20 15,5 14 2 3 3,5P1242.08-22 8 22 17,5 14 2 3 3,5P1242.08-24 8 24 19,5 14 2 3 3,5P1242.08-26 8 26 21,5 14 2 3 3,5P1242.08-28 8 28 23,5 14 2 3 3,5P1242.08-30 8 30 25,5 14 2 3 3,5P1242.08-32 8 32 27,5 14 2 3 3,5P1242.08-35 8 35 30,5 14 2 3 3,5P1242.08-40 8 40 35,5 14 2 3 3,5P1242.08-45 8 45 40,5 14 2 3 3,5P1242.08-50 8 50 45,5 14 2 3 3,5P1242.08-55 8 55 50,5 14 2 3 3,5P1242.08-60 8 60 55,5 14 2 3 3,5P1242.08-65 8 65 58,9 18 3,2 4 4,5P1242.08-70 8 70 63,9 18 3,2 4 4,5P1242.08-75 8 75 68,9 18 3,2 4 4,5P1242.08-80 8 80 73,9 18 3,2 4 4,5

PINS

& W

ASHE

RS

P1242MaterialMild steel, zinc plated.To ISO 2341 Form B,DIN1444 type B.

Technical NotesThe nominal length is the total length from under L1 head to the end of the pin.The grip length G1 is [L1 - L2 - (Ad1)].Diameter tolerance h11.Length tolerances:-up to 10mm long - ±0,2512-50mm long - ±0,50over 50mm long - ±0,75


For smaller sizes see previous page.

TipsFor use with cotter pins.(P1240 or P1241) or retaining pins (P1243).

Clevis PinsDIN 1444 type B

Order No.d

h11L1 G1 H d1 T L2

P1242.10-20 10 20 13,9 18 3,2 4 4,5P1242.10-22 10 22 15,9 18 3,2 4 4,5P1242.10-24 10 24 17,9 18 3,2 4 4,5P1242.10-26 10 26 19,9 18 3,2 4 4,5P1242.10-28 10 28 21,9 18 3,2 4 4,5P1242.10-30 10 30 23,9 18 3,2 4 4,5P1242.10-32 10 32 25,9 18 3,2 4 4,5P1242.10-35 10 35 28,9 18 3,2 4 4,5P1242.10-40 10 40 33,9 18 3,2 4 4,5P1242.10-45 10 45 38,9 18 3,2 4 4,5P1242.10-50 10 50 43,9 18 3,2 4 4,5P1242.10-55 10 55 48,9 18 3,2 4 4,5P1242.10-60 10 60 53,9 18 3,2 4 4,5P1242.10-65 10 65 58,9 18 3,2 4 4,5P1242.10-70 10 70 63,9 18 3,2 4 4,5P1242.10-75 10 75 68,9 18 3,2 4 4,5P1242.10-80 10 80 73,9 18 3,2 4 4,5P1242.10-85 10 85 77,9 20 3,2 4 5,5P1242.10-90 10 90 82,9 20 3,2 4 5,5P1242.10-95 10 95 87,9 20 3,2 4 5,5

P1242.10-100 10 100 92,9 20 3,2 4 5,5

P1242.12-24 12 24 16,9 20 3,2 4 5,5P1242.12-26 12 26 18,9 20 3,2 4 5,5P1242.12-28 12 28 20,9 20 3,2 4 5,5P1242.12-30 12 30 22,9 20 3,2 4 5,5P1242.12-32 12 32 24,9 20 3,2 4 5,5P1242.12-35 12 35 27,9 20 3,2 4 5,5P1242.12-40 12 40 32,9 20 3,2 4 5,5P1242.12-45 12 45 37,9 20 3,2 4 5,5P1242.12-50 12 50 42,9 20 3,2 4 5,5P1242.12-55 12 55 47,9 20 3,2 4 5,5P1242.12-60 12 60 52,9 20 3,2 4 5,5P1242.12-65 12 65 57,9 20 3,2 4 5,5P1242.12-70 12 70 62,9 20 3,2 4 5,5P1242.12-75 12 75 67,9 20 3,2 4 5,5P1242.12-80 12 80 72,9 20 3,2 4 5,5P1242.12-85 12 85 77,9 20 3,2 4 5,5P1242.12-90 12 90 82,9 20 3,2 4 5,5P1242.12-95 12 95 87,9 20 3,2 4 5,5

P1242.12-100 12 100 92,9 20 3,2 4 5,5P1242.12-120 12 120 97,9 20 3,2 4 5,5

PINS & WASHERS

P1243MaterialZinc plated, spring steel (1,7223) or Stainless steel A2.

Technical NotesSingle and double coils (for more demanding applications).


Retaining Pins (R clips)

Order No. MaterialRec.

Hole SizeType d D L Range of

shaft Ø

P1243.015 Steel 1,5 Single 1,2 3,5 22 5-8P1243.020 Steel 2,0 Single 1,6 5,0 22 7-12P1243.022 Steel 2,2 Single 1,8 7,5 32 8-13P1243.025 Steel 2,5 Single 2,0 10 50 9-14P1243.035 Steel 3,5 Single 3,0 18 60 10-16P1243.045 Steel 4,5 Single 4,0 20 60 16-20P1243.060 Steel 6,0 Single 5,0 24 85 20-28P1243.070 Steel 7,0 Single 6,0 30 105 28-40P1243.080 Steel 8,0 Single 7,0 30 105 28-45P1243.090 Steel 9,0 Single 8,0 28 110 30-45

P1243.125 Steel 2,5 Double 2,0 10 50 8-14P1243.135 Steel 3,5 Double 3,0 16 62 14-20P1243.145 Steel 4,5 Double 4,0 23 78 17-24P1243.155 Steel 5,5 Double 5,0 26 92 18-30P1243.165 Steel 6,5 Double 6,0 30 120 24-36P1243.180 Steel 8,0 Double 7,0 30 130 26-40P1243.190 Steel 9,0 Double 8,0 30 130 24-40

P1243.525 Stainless 2,5 Double 2,25 - 42 -P1243.532 Stainless 3,2 Double 2,8 - 48 -P1243.540 Stainless 4,0 Double 3,6 - 64 -P1243.550 Stainless 5,0 Double 4,5 - 80 -P1243.563 Stainless 6,3 Double 5,6 - 97 -P1243.570 Stainless 7,0 Double 6,3 - 125 -P1243.580 Stainless 8,0 Double 7 - 150 -

PINS & WASHERS

P1245MaterialLow carbon steel, cold formed.

Technical NotesUsed to replace screws where the need to remove the pin is unlikely.Installation by hammer or press.


TipsAs the knurl has to cut it's way into the walls of the hole, they are desgned for use with unhardened materials such as aluminium, brass and plastics.

Important NotesSimple, low cost assembly.Do not require lock washers to prevent back-out.

Hammer Drive Pinsflat head

Order No.Stud size

L ± 0,25

d1Ø min.

d1 Ø

max.

d2Ø min.

d2Ø

max.

Head Ø min.

HeadØ

max.

Thickness min

Thickness max

C P Hole Ø min

Hole Ø max

Drill size

P1245.F1.4-05 1,4 5 1,35 1,4 1,53 1,63 2,2 2,6 0,35 0,55 0,15 1 1,4 1,46 1,4P1245.F1.4-06 1,4 6 1,35 1,4 1,53 1,63 2,2 2,6 0,35 0,55 0,15 1 1,4 1,46 1,4P1245.F1.4-08 1,4 8 1,35 1,4 1,53 1,63 2,2 2,6 0,35 0,55 0,15 1 1,4 1,46 1,4

P1245.F1.6-05 1,6 5 1,55 1,6 1,73 1,83 2,6 3 0,45 0,65 0,15 1 1,6 1,66 1,6P1245.F1.6-06 1,6 6 1,55 1,6 1,73 1,83 2,6 3 0,45 0,65 0,15 1 1,6 1,66 1,6P1245.F1.6-08 1,6 8 1,55 1,6 1,73 1,83 2,6 3 0,45 0,65 0,15 1 1,6 1,66 1,6

P1245.F2-06 2 6 1,95 2 2,2 2,3 3,3 3,7 0,55 0,75 0,15 1 2 2,06 2P1245.F2-08 2 8 1,95 2 2,2 2,3 3,3 3,7 0,55 0,75 0,15 1 2 2,06 2P1245.F2-10 2 10 1,95 2 2,2 2,3 3,3 3,7 0,55 0,75 0,15 1 2 2,06 2

P1245.F2.,5-06 2,5 6 2,45 2,5 2,7 2,8 4,2 4,6 0,7 0,9 0,15 1 2,5 2,56 2,5P1245.F2.5-08 2,5 8 2,45 2,5 2,7 2,8 4,2 4,6 0,7 0,9 0,15 1 2,5 2,56 2,5P1245.F2.5-10 2,5 10 2,45 2,5 2,7 2,8 4,2 4,6 0,7 0,9 0,15 1 2,5 2,56 2,5

P1245.F3-08 3 8 2,95 3 3,25 3,35 4,95 5,45 0,9 1,2 0,15 1 3 3,06 3P1245.F3-10 3 10 2,95 3 3,25 3,35 4,95 5,45 0,9 1,2 0,15 1 3 3,06 3P1245.F3-12 3 12 2,95 3 3,25 3,35 4,95 5,45 0,9 1,2 0,15 1 3 3,06 3

P1245.F4-10 4 10 3,95 4 4,25 4,35 6,75 7,25 1,2 1,5 0,4 2 4 4,08 4P1245.F4-12 4 12 3,95 4 4,25 4,35 6,75 7,25 1,2 1,5 0,4 2 4 4,08 4P1245.F4-16 4 16 3,95 4 4,25 4,35 6,75 7,25 1,2 1,5 0,4 2 4 4,08 4

P1245.F5-12 5 12 4,95 5 5,25 5,35 8,5 9,1 1,5 1,8 0,4 2 5 5,08 5P1245.F5-16 5 16 4,95 5 5,25 5,35 8,5 9,1 1,5 1,8 0,4 2 5 5,08 5P1245.F5-20 5 20 4,95 5 5,25 5,35 8,5 9,1 1,5 1,8 0,4 2 5 5,08 5

P1245.F6-16 6 16 5,95 6 6,25 6,35 10,2 10,8 1,9 2,2 0,4 2 6 6.08 6P1245.F6-20 6 20 5,95 6 6,25 6,35 10,2 10,8 1,9 2,2 0,4 2 6 6.08 6

PINS

& W

ASHE

RS

P1245MaterialLow carbon steel, cold formed.

Technical NotesUsed to replace screws where the need to remove the pin is unlikely.Installation by hammer or press.


TipsAs the knurl has to cut it's way into the walls of the hole, they are desgned for use with unhardened materials such as aluminium, brass and plastics.

Important NotesSimple, low cost assembly.Do not require lock washers to prevent back-out.

Hammer Drive Pinsround head

Order No.Stud size

L ± 0,25

d1Ø min.

d1 Ø

max.

d2Ø min.

d2Ø

max.

Head Ø min.

HeadØ

max.

Thickness min

Thickness max

C P Hole Ø min

Hole Ø max

Drill size

P1245.R1.4-05 1,4 5 1,35 1,4 1,53 1,63 2,2 2,6 0,7 0,9 0,15 1 1,4 1,46 1,4P1245.R1.4-06 1,4 6 1,35 1,4 1,53 1,63 2,2 2,6 0,7 0,9 0,15 1 1,4 1,46 1,4P1245.R1.4-08 1,4 8 1,35 1,4 1,53 1,63 2,2 2,6 0,7 0,9 0,15 1 1,4 1,46 1,4

P1245.R1.6-05 1,6 5 1,55 1,6 1,73 1,83 2,6 3 0,9 1,1 0,15 1 1,6 1,66 1,6P1245.R1.6-06 1,6 6 1,55 1,6 1,73 1,83 2,6 3 0,9 1,1 0,15 1 1,6 1,66 1,6P1245.R1.6-08 1,6 8 1,55 1,6 1,73 1,83 2,6 3 0,9 1,1 0,15 1 1,6 1,66 1,6

P1245.R2-06 2 6 1,95 2 2,2 2,3 3,3 3,7 1,1 1,3 0,15 1 2 2,06 2P1245.R2-08 2 8 1,95 2 2,2 2,3 3,3 3,7 1,1 1,3 0,15 1 2 2,06 2P1245.R2-10 2 10 1,95 2 2,2 2,3 3,3 3,7 1,1 1,3 0,15 1 2 2,06 2

P1245.R2.5-06 2,5 6 2,45 2,5 2,7 2,8 4,2 4,6 1,4 1,6 0,15 1 2,5 2,56 2,5P1245.R2.5-08 2,5 8 2,45 2,5 2,7 2,8 4,2 4,6 1,4 1,6 0,15 1 2,5 2,56 2,5P1245.R2.5-10 2,5 10 2,45 2,5 2,7 2,8 4,2 4,6 1,4 1,6 0,15 1 2,5 2,56 2,5

P1245.R3-08 3 8 2,95 3 3,25 3,35 4,95 5,45 1,65 1,95 0,15 1 3 3,06 3P1245.R3-10 3 10 2,95 3 3,25 3,35 4,95 5,45 1,65 1,95 0,15 1 3 3,06 3P1245.R3-12 3 12 2,95 3 3,25 3,35 4,95 5,45 1,65 1,95 0,15 1 3 3,06 3

P1245.R4-10 4 10 3,95 4 4,25 4,35 6,75 7,25 2,25 2,55 0,4 2 4 4,08 4P1245.R4-12 4 12 3,95 4 4,25 4,35 6,75 7,25 2,25 2,55 0,4 2 4 4,08 4P1245.R4-16 4 16 3,95 4 4,25 4,35 6,75 7,25 2,25 2,55 0,4 2 4 4,08 4

P1245.R5-12 5 12 4,95 5 5,25 5,35 8,5 9,1 2,85 3,15 0,4 2 5 5,08 5P1245.R5-16 5 16 4,95 5 5,25 5,35 8,5 9,1 2,85 3,15 0,4 2 5 5,08 5P1245.R5-20 5 20 4,95 5 5,25 5,35 8,5 9,1 2,85 3,15 0,4 2 5 5,08 5

P1245.R6-16 6 16 5,95 6 6,25 6,35 10,2 10,8 3,45 3,75 0,4 2 6 6.08 6P1245.R6-20 6 20 5,95 6 6,25 6,35 10,2 10,8 3,45 3,75 0,4 2 6 6.08 6

PINS

& W

ASHE

RS

P1247MaterialMild steel, with spring steel clips. Finish in zinc with yellow chromate finish.

Technical NotesIn pin sizes 4,5 and 6 there is no flat on the pin so d is same as d1.

Linch Pins

Order No.Pin Ø

dPin Ø

d1Length

lShaft ØA max.

P1247.045 4,5 4,5 42 30P1247.060 6,0 6,0 42 38,5P1247.070 7,0 6,0 42 38,5P1247.080 8,0 7,0 42 38,5P1247.090 9,0 7,5 42 38,5P1247.100 10,0 8,0 42 38,5P1247.110 11,0 9,0 42 38,5

PINS & WASHERS

P1248MaterialMild steel, with spring steel clips. Finish in zinc with yellow chromate finish.

Shaft Locking Pins

Order No.Pin Ø

ALength

BShaft ØC max.

P1248.041 4,5 32 28P1248.042 4,5 40 36

P1248.061 6,0 32 28P1248.062 6,0 40 36P1248.063 6,0 45 40

P1248.081 8,0 40 36P1248.082 8,0 45 40P1248.083 8,0 50 45P1248.084 8,0 60 50

P1248.101 10,0 40 36P1248.102 10,0 50 45P1248.103 10,0 60 55

P1248.111 11,0 45 40P1248.112 11,0 55 50

PINS & WASHERS

P1216MaterialMild steel WS1,0718 (9SMnPB28K). Ground finish.

Technical NotesTo DIN 1B.

The nominal diameter is always the smaller end and the taper is 1:50 (2%).Length tolerance to js15.



Taper pinsDIN 1B

Order No. d l c

P1216-01.5-06 1,5 6 0,23P1216-01.5-08 1,5 8 0,23P1216-01.5-10 1,5 10 0,23P1216-01.5-12 1,5 12 0,23P1216-01.5-14 1,5 14 0,23P1216-01.5-16 1,5 16 0,23P1216-01.5-18 1,5 18 0,23P1216-01.5-20 1,5 20 0,23P1216-01.5-24 1,5 24 0,23P1216-01.5-28 1,5 28 0,23P1216-01.5-30 1,5 30 0,23


P1216.02.5-06 2,5 6 0,4P1216.02.5-08 2,5 8 0,4P1216.02.5-10 2,5 10 0,4P1216.02.5-12 2,5 12 0,4P1216.02.5-14 2,5 14 0,4P1216.02.5-16 2,5 16 0,4P1216.02.5-18 2,5 18 0,4P1216.02.5-20 2,5 20 0,4P1216.02.5-24 2,5 24 0,4P1216.02.5-28 2,5 28 0,4P1216.02.5-30 2,5 30 0,4P1216.02.5-32 2,5 32 0,4P1216.02.5-36 2,5 36 0,4P1216.02.5-40 2,5 40 0,4P1216.02.5-45 2,5 45 0,4P1216.02.5-50 2,5 50 0,4

P1216.03-06 3 6 0,45P1216.03-08 3 8 0,45P1216.03-10 3 10 0,45P1216.03-12 3 12 0,45P1216.03-14 3 14 0,45P1216.03-16 3 16 0,45P1216.03-18 3 18 0,45P1216.03-20 3 20 0,45

PINS

& W

ASHE

RS






Taper pinsDIN 1B

Order No. d l c

P1216.03-24 3 24 0,45P1216.03-28 3 28 0,45P1216.03-30 3 30 0,45P1216.03-32 3 32 0,45P1216.03-36 3 36 0,45P1216.03-40 3 40 0,45P1216.03-45 3 45 0,45P1216.03-50 3 50 0,45P1216.03-55 3 55 0,45P1216.03-60 3 60 0,45P1216.03-65 3 65 0,45P1216.03-70 3 70 0,45P1216.03-80 3 80 0,45P1216.03-90 3 90 0,45

P1216.03-100 3 100 0,45

P1216.04-06 4 6 0,6P1216.04-08 4 8 0,6P1216.04-10 4 10 0,6P1216.04-12 4 12 0,6P1216.04-14 4 14 0,6P1216.04-16 4 16 0,6P1216.04-18 4 18 0,6P1216.04-20 4 20 0,6P1216.04-24 4 24 0,6P1216.04-28 4 28 0,6P1216.04-30 4 30 0,6P1216.04-32 4 32 0,6P1216.04-36 4 36 0,6P1216.04-40 4 40 0,6P1216.04-45 4 45 0,6P1216.04-50 4 50 0,6P1216.04-55 4 55 0,6P1216.04-60 4 60 0,6P1216.04-65 4 65 0,6P1216.04-70 4 70 0,6P1216.04-80 4 80 0.6P1216.04-90 4 90 0.6

P1216.04-100 4 100 0.6

P1216.05-10 5 10 0,75P1216.05-12 5 12 0,75P1216.05-14 5 14 0,75P1216.05-16 5 16 0,75P1216.05-18 5 18 0,75P1216.05-20 5 20 0,75

PINS & WASHERS






Taper pinsDIN 1B

Order No. d l c

P1216.05-24 5 24 0,75P1216.05-28 5 28 0,75P1216.05-30 5 30 0,75P1216.05-32 5 32 0,75P1216.05-36 5 36 0,75P1216.05-40 5 40 0,75P1216.05-45 5 45 0,75P1216.05-50 5 50 0,75P1216.05-55 5 55 0,75P1216.05-60 5 60 0,75P1216.05-65 5 65 0,75P1216.05-70 5 70 0,75P1216.05-80 5 80 0,75P1216.05-90 5 90 0,75

P1216.05-100 5 100 0,75

P1216.06-10 6 10 0,9P1216.06-12 6 12 0,9P1216.06-14 6 14 0,9P1216.06-16 6 16 0,9P1216.06-18 6 18 0,9P1216.06-20 6 20 0,9P1216.06-24 6 24 0,9P1216.06-28 6 28 0,9P1216.06-30 6 30 0,9P1216.06-32 6 32 0,9P1216.06-36 6 36 0,9P1216.06-40 6 40 0,9P1216.06-45 6 45 0,9P1216.06-50 6 50 0,9P1216.06-55 6 55 0,9P1216.06-60 6 60 0,9P1216.06-65 6 65 0,9P1216.06-70 6 70 0,9P1216.06-80 6 80 0,9P1216.06-90 6 90 0,9

P1216.06-100 6 100 0,9

P1216.08-20 8 20 1P1216.08-24 8 24 1P1216.08-28 8 28 1P1216.08-30 8 30 1P1216.08-32 8 32 1P1216.08-36 8 36 1P1216.08-40 8 40 1P1216.08-45 8 45 1P1216.08-50 8 50 1P1216.08-55 8 55 1P1216.08-60 8 60 1P1216.08-65 8 65 1P1216.08-70 8 70 1P1216.08-80 8 80 1P1216.08-90 8 90 1

P1216.08-100 8 100 1

PINS

& W

ASHE

RS






Taper pinsDIN 1B

Order No. d l c

P1216.10-28 10 28 1,2P1216.10-30 10 30 1,2P1216.10-32 10 32 1,2P1216.10-36 10 36 1,2P1216.10-40 10 40 1,2P1216.10-45 10 45 1,2P1216.10-50 10 50 1,2P1216.10-55 10 55 1,2P1216.10-60 10 60 1,2P1216.10-65 10 65 1,2P1216.10-70 10 70 1,2P1216.10-80 10 80 1,2P1216.10-90 10 90 1,2

P1216.10-100 10 100 1,2P1216.10-110 10 110 1,2P1216.10-120 10 120 1,2P1216.10-130 10 130 1,2

P1216.12-30 12 30 1,6P1216.12-32 12 32 1,6P1216.12-36 12 36 1,6P1216.12-40 12 40 1,6P1216.12-45 12 45 1,6P1216.12-50 12 50 1,6P1216.12-55 12 55 1,6P1216.12-60 12 60 1,6P1216.12-65 12 65 1,6P1216.12-70 12 70 1,6P1216.12-80 12 80 1,6P1216.12-90 12 90 1,6

P1216.12-100 12 100 1,6P1216.12-110 12 110 1,6P1216.12-120 12 120 1,6P1216.12-130 12 130 1,6

P1216.14-36 14 36 1,6P1216.14-40 14 40 1,6P1216.14-45 14 45 1,6P1216.14-50 14 50 1,6P1216.14-55 14 55 1,6P1216.14-60 14 60 1,6P1216.14-65 14 65 1,6P1216.14-70 14 70 1,6P1216.14-80 14 80 1,6P1216.14-90 14 90 1,6

P1216.14-100 14 100 1,6P1216.14-110 14 110 1,6P1216.14-120 14 120 1,6P1216.14-130 14 130 1,6P1216.14-140 14 140 1,6P1216.14-150 14 150 1,6

PINS & WASHERS






Taper pinsDIN 1B

Order No. d l c

P1216.16-36 16 36 2P1216.16-40 16 40 2P1216.16-45 16 45 2P1216.16-50 16 50 2P1216.16-55 16 55 2P1216.16-60 16 60 2P1216.16-65 16 65 2P1216.16-70 16 70 2P1216.16-80 16 80 2P1216.16-90 16 90 2

P1216.16-100 16 100 2P1216.16-110 16 110 2P1216.16-120 16 120 2P1216.16-130 16 130 2P1216.16-140 16 140 2P1216.16-150 16 150 2

P1216.20-40 20 40 2,5P1216.20-45 20 45 2,5P1216.20-50 20 50 2,5P1216.20-55 20 55 2,5P1216.20-60 20 60 2,5P1216.20-65 20 65 2,5P1216.20-70 20 70 2,5P1216.20-80 20 80 2,5P1216.20-90 20 90 2,5

P1216.20-100 20 100 2,5P1216.20-110 20 110 2,5P1216.20-120 20 120 2,5P1216.20-130 20 130 2,5P1216.20-140 20 140 2,5P1216.20-150 20 150 2,5

PINS

& W

ASHE

RS


Technical NotesTo DIN 7978, ISO 8736.

The nominal diameter is always the smaller end and the taper is 1:50 (2%).Length tolerance to js 15.


Taper pins - extractableDIN 7978, ISO 8736




P1218.08-100 8 100 M5P1218.08-110 8 110 M5P1218.08-120 8 120 M5

P1218.10-24 10 24 M6P1218.10-26 10 26 M6P1218.10-28 10 28 M6P1218.10-30 10 30 M6P1218.10-32 10 32 M6P1218.10-36 10 36 M6P1218.10-40 10 40 M6P1218.10-45 10 45 M6P1218.10-50 10 50 M6P1218.10-55 10 55 M6P1218.10-60 10 60 M6P1218.10-70 10 70 M6P1218.10-90 10 90 M6

P1218.10-100 10 100 M6P1218.10-110 10 110 M6P1218.10-120 10 120 M6

PINS & WASHERS


Technical NotesTo DIN 7978, ISO 8736.

The nominal diameter is always the smaller end and the taper is 1:50 (2%).Length tolerance to js 15.


Taper pins - extractableDIN 7978, ISO 8736


P1218.12-32 12 32 M8P1218.12-36 12 36 M8P1218.12-40 12 40 M8P1218.12-45 12 45 M8P1218.12-50 12 50 M8P1218.12-55 12 55 M8P1218.12-60 12 60 M8P1218.12-70 12 70 M8P1218.12-90 12 90 M8

P1218.12-100 12 100 M8P1218.12-110 12 110 M8P1218.12-120 12 120 M8

P1218.14-40 14 40 M8P1218.14-45 14 45 M8P1218.14-50 14 50 M8P1218.14-55 14 55 M8P1218.14-60 14 60 M8P1218.14-70 14 70 M8P1218.14-90 14 90 M8

P1218.14-100 14 100 M8P1218.14-110 14 110 M8P1218.14-120 14 120 M8

P1218.16-40 16 40 M10P1218.16-45 16 45 M10P1218.16-50 16 50 M10P1218.16-55 16 55 M10P1218.16-60 16 60 M10P1218.16-70 16 70 M10P1218.16-90 16 90 M10

P1218.16-100 16 100 M10P1218.16-110 16 110 M10P1218.16-120 16 120 M10

P1218.20-40 20 40 M12P1218.20-45 20 45 M12P1218.20-50 20 50 M12P1218.20-55 20 55 M12P1218.20-60 20 60 M12P1218.20-70 20 70 M12P1218.20-90 20 90 M12

P1218.20-100 20 100 M12P1218.20-110 20 110 M12P1218.20-120 20 120 M12

PINS

& W

ASHE

RS


Technical NotesTo ISO 8752.Slotted springs consist of a single coil of spring steel with an open slot sufficiently wide enough to enable the pin to reduce in diameter as it is driven into the hole. The ends of the pin have a bevelled chamfer. they are designed for plain drilled holes, but a countersink makes assembly easier, especially for the ISO 8752 type. Slotted pins are normally supplied in the heavy duty form to ISO 8752, but a light duty version can be supplied to ISO 13337.Length tolerances:-1-10mm long - ±0,2512-50mm long - ±0,50over 50mm long - ±0,75

Sold in packs of 10.Pins with a nominal diameter of 10mm or greater may be delivered with one chamfer.

For larger sizes, see following pages.

TipsWhere pins are to be installed in plastic it is recommended that they are de-oiled before use to avoid embrittlement of the plastic.

Slotted pins - carbon steelISO 8752

Order No. D LExp. dia.

min.Exp. dia.

max.Hole size

min.Hole size

max.Material

Thickness

Double Shear

Strength kN

P1230.01-04 1,0 4 1,2 1,3 1,0 1,10 0,2 0,7P1230.01-05 1,0 5 1,2 1,3 1,0 1,10 0,2 0,7P1230.01-06 1,0 6 1,2 1,3 1,0 1,10 0,2 0,7P1230.01-08 1,0 8 1,2 1,3 1,0 1,10 0,2 0,7P1230.01-10 1,0 10 1,2 1,3 1,0 1,10 0,2 0,7P1230.01-12 1,0 12 1,2 1,3 1,0 1,10 0,2 0,7P1230.01-14 1,0 14 1,2 1,3 1,0 1,10 0,2 0,7P1230.01-16 1,0 16 1,2 1,3 1,0 1,10 0,2 0,7P1230.01-18 1,0 18 1,2 1,3 1,0 1,10 0,2 0,7P1230.01-20 1,0 20 1,2 1,3 1,0 1,10 0,2 0,7

P1230.01,5-04 1,5 4 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-06 1,5 6 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-08 1,5 8 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-10 1,5 10 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-12 1,5 12 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-14 1,5 14 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-16 1,5 16 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-18 1,5 18 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-20 1,5 20 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-22 1,5 22 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-24 1,5 24 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-26 1,5 26 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-28 1,5 28 1,7 1,8 1,5 1,60 0,3 1,58P1230.01,5-30 1,5 30 1,7 1,8 1,5 1,60 0,3 1,58

P1230.02-04 2,0 4 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-06 2,0 5 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-08 2,0 8 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-10 2,0 10 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-12 2,0 12 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-14 2,0 14 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-16 2,0 16 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-18 2,0 18 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-20 2,0 20 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-22 2,0 22 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-24 2,0 24 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-26 2,0 26 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-28 2,0 28 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-30 2,0 30 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-35 2,0 35 2,3 2,4 2,0 2,10 0,4 2,82P1230.02-40 2,0 40 2,3 2,4 2,0 2,10 0,4 2,82

PINS & WASHERS


Technical NotesTo ISO 8752.Slotted springs consist of a single coil of spring steel with an open slot sufficiently wide enough to enable the pin to reduce in diameter as it is driven into the hole.Length tolerances:-1-10mm long - ±0,2512-50mm long - ±0,50over 50mm long - ±0,75Sold in packs of 10.The ends of the pin have a bevelled chamfer. they are designed for plain drilled holes, but a countersink makes assembly easier, especially for the ISO 8752 type. Slotted pins are normally supplied in the heavy duty form to ISO 8752, but a light duty version can be supplied to ISO 13337.Length tolerances:-1-10mm long - ±0,2512-50mm long - ±0,50over 50mm long - ±0,75

Sold in packs of 10.Pins with a nominal diameter of 10mm or greater may be delivered with one chamfer.

For smaller sizes, see previous pages.For larger sizes, see following pages.


Order No. D LExp.dia.

min.Exp.dia.

max.Hole size

min.Hole size

max.Material

Thickness

Double Shear

Strength kN

P1230.02,5-04 2,5 4 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-05 2,5 5 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-06 2,5 6 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-08 2,5 8 2,8 2,9 2,5 2,60 2,5 4,38P1230.02,5-10 2,5 10 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-12 2,5 12 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-14 2,5 14 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-16 2,5 16 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-18 2,5 18 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-20 2,5 20 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-22 2,5 22 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-24 2,5 24 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-26 2,5 26 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-28 2,5 28 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-30 2,5 30 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-35 2,5 35 2,8 2,9 2,5 2,60 0,5 4,38P1230.02,5-40 2,5 40 2,8 2,9 2,5 2,60 0,5 4,38

P1230.03-04 3,0 4 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-05 3,0 5 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-06 3,0 6 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-08 3,0 8 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-10 3,0 10 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-12 3,0 12 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-13 3,0 14 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-16 3,0 16 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-18 3,0 18 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-20 3,0 20 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-22 3,0 22 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-24 3,0 24 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-26 3,0 26 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-28 3,0 28 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-30 3,0 30 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-35 3,0 35 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-40 3,0 40 3,3 3,5 3,0 3,10 0,6 6,32P1230.03-45 3,0 45 3,3 3,5 3,0 3,10 0,6 6,32

P1230.03,5-04 3,5 4 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-05 3,5 5 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-06 3,5 6 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-08 3,5 8 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-10 3,5 10 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-12 3,5 12 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-14 3,5 14 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-16 3,5 16 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-18 3,5 18 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-20 3,5 20 3,8 4,0 3,5 3,62 0,7 9,06

PINS

& W

ASHE

RS



Sold in packs of 10.Pins with a nominal diameter of 10mm or greater may be delivered with one chamfer.For smaller sizes, see previous pages.For larger sizes, see following pages.



min.Exp. dia.

maxHole size

min.Hole size

max.Material

Thickness

Double Shear

Strength kN

P1230.03,5-22 3,5 22 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-24 3,5 24 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-26 3,5 26 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-28 3,5 28 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-30 3,5 30 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-35 3,5 35 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-40 3,5 40 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-45 3,5 45 3,8 4,0 3,5 3,62 0,7 9,06P1230.03,5-50 3,5 50 3,8 4,0 3,5 3,62 0,7 9,06

P1230.04-04 4,0 4 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-05 4,0 5 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-06 4,0 6 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-08 4,0 8 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-10 4,0 10 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-12 4,0 12 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-14 4,0 14 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-16 4,0 16 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-18 4,0 18 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-20 4,0 20 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-22 4,0 22 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-24 4,0 24 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-26 4,0 26 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-28 4,0 28 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-30 4,0 30 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-35 4,0 35 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-40 4,0 40 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-45 4,0 45 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-50 4,0 50 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-55 4,0 55 4,4 4,6 4,0 4,12 0,8 11,24P1230.04-60 4,0 60 4,4 4,6 4,0 4,12 0,8 11,24

P1230.05-06 5,0 6 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-08 5,0 8 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-10 5,0 10 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-12 5,0 12 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-14 5,0 14 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-16 5,0 16 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-18 5,0 18 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-20 5,0 20 5,4 5,6 5,0 5,12 1,0 17,54

PINS & WASHERS






min.Exp.dia.

max.Hole size

min.Hole size

max.Material

Thickness

Double Shear

Strength kN

P1230.05-22 5,0 22 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-24 5,0 24 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-26 5,0 26 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-28 5,0 28 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-30 5,0 30 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-35 5,0 35 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-40 5,0 40 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-45 5,0 45 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-50 5,0 50 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-55 5,0 55 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-60 5,0 60 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-65 5,0 65 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-70 5,0 70 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-75 5,0 75 5,4 5,6 5,0 5,12 1,0 17,54P1230.05-80 5,0 80 5,4 5,6 5,0 5,12 1,0 17,54

P1230.06-08 6,0 8 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-10 6,0 10 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-12 6,0 12 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-14 6,0 14 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-16 6,0 16 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-18 6,0 18 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-20 6,0 20 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-22 6,0 22 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-24 6,0 24 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-26 6,0 26 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-28 6,0 28 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-30 6,0 30 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-35 6,0 35 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-40 6,0 40 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-45 6,0 45 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-50 6,0 50 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-55 6,0 55 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-60 6,0 60 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-65 6,0 65 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-70 6,0 70 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-75 6,0 75 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-80 6,0 80 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-85 6,0 85 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-90 6,0 90 6,4 6,7 6,0 6,12 1,2 26,04P1230.06-95 6,0 95 6,4 6,7 6,0 6,12 1,2 26,04

P1230.06-100 6,0 100 6,4 6,7 6,0 6,12 6,0 26,04

PINS

& W

ASHE

RS





Order No. D LExp. diam.

min.Exp. diam.

max.Hole size

min.Hole size

max.Material

Thckness

Double Shear

Strength KN

P1230.08-08 8,0 8 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-10 8,0 10 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-12 8,0 12 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-14 8,0 14 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-16 8,0 16 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-18 8,0 18 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-20 8,0 20 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-22 8,0 22 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-24 8,0 24 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-26 8,0 26 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-28 8,0 28 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-30 8,0 30 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-35 8,0 35 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-40 8,0 40 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-45 8,0 45 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-50 8,0 50 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-55 8,0 55 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-60 8,0 60 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-65 8,0 65 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-70 8,0 70 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-75 8,0 75 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-80 8,0 80 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-85 8,0 85 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-90 8,0 90 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-95 8,0 95 8,5 8,8 8,0 8,15 1,5 42,76

P1230.08-100 8,0 100 8,5 8,8 8,0 8,15 1,5 42,76P1230.08-120 8,0 120 8,5 8,8 8,0 8,15 1,5 42,76

1230.10-10 10,0 10 10,5 10,8 10,0 10,5 2,0 70,161230.10-12 10,0 12 10,5 10,8 10,0 10,5 2,0 70,161230.10-14 10,0 14 10,5 10,8 10,0 10,5 2,0 70,161230.10-16 10,0 16 10,5 10,8 10,0 10,5 2,0 70,161230.10-18 10,0 18 10,5 10,8 10,0 10,5 2,0 70,161230.10-20 10,0 20 10,5 10,8 10,0 10,5 2,0 70,161230.10-22 10,0 22 10,5 10,8 10,0 10,5 2,0 70,161230.10-24 10,0 24 10,5 10,8 10,0 10,5 2,0 70,161230.10-26 10,0 26 10,5 10,8 10,0 10,5 2,0 70,161230.10-28 10,0 28 10,5 10,8 10,0 10,5 2,0 70,161230.10-30 10,0 30 10,5 10,8 10,0 10,5 2,0 70,161230.10-35 10,0 35 10,5 10,8 10,0 10,5 2,0 70,161230.10-40 10,0 40 10,5 10,8 10,0 10,5 2,0 70,161230.10-45 10,0 45 10,5 10,8 10,0 10,5 2,0 70,161230.10-50 10,0 50 10,5 10,8 10,0 10,5 2,0 70,161230.10-55 10,0 55 10,5 10,8 10,0 10,5 2,0 70,161230.10-60 10,0 60 10,5 10,8 10,0 10,5 2,0 70,161230.10-65 10,0 65 10,5 10,8 10,0 10,5 2,0 70,161230.10-70 10,0 70 10,5 10,8 10,0 10,5 2,0 70,16

PINS & WASHERS



Sold in packs of 10.Pins with a nominal diameter of 10mm or greater may be delivered with one chamfer.For smaller sizes, see previous pages.


Order No. D LExp. diam.

min.Exp. diam.

max.Hole size

min.Hole size

max.Material

Thckness

Double Shear

Strength KN

1230.10-75 10,0 75 10,5 10,8 10,0 10,5 2,0 70,161230.10-80 10,0 80 10,5 10,8 10,0 10,5 2,0 70,161230.10-85 10,0 85 10,5 10,8 10,0 10,5 2,0 70,161230.10-90 10,0 90 10,5 10,8 10,0 10,5 2,0 70,161230.10-95 10,0 95 10,5 10,8 10,0 10,5 2,0 70,16

1230.10-100 10,0 100 10,5 10,8 10,0 10,5 2,0 70,161230.10-120 10,0 120 10,5 10,8 10,0 10,5 2,0 70,161230.10-130 10,0 130 10,5 10,8 10,0 10,5 2,0 70,161230.10-140 10,0 140 10,5 10,8 10,0 10,5 2,0 70,161230.10-150 10,0 150 10,5 10,8 10,0 10,5 2,0 70,161230.10-160 10,0 160 10,5 10,8 10,0 10,5 2,0 70,16

1230.12-10 12,0 10 12,5 12,8 12,0 12,17 2,5 104,11230.12-12 12,0 12 12,5 12,8 12,0 12,17 2,5 104,11230.12-14 12,0 14 12,5 12,8 12,0 12,17 2,5 104,11230.12-16 12,0 16 12,5 12,8 12,0 12,17 2,5 104,11230.12-18 12,0 18 12,5 12,8 12,0 12,17 2,5 104,11230.12-20 12,0 20 12,5 12,8 12,0 12,17 2,5 104,11230.12-22 12,0 22 12,5 12,8 12,0 12,17 2,5 104,11230.12-24 12,0 24 12,5 12,8 12,0 12,17 2,5 104,11230.12-26 12,0 26 12,5 12,8 12,0 12,17 2,5 104,11230.12-28 12,0 28 12,5 12,8 12,0 12,17 2,5 104,11230.12-30 12,0 30 12,5 12,8 12,0 12,17 2,5 104,11230.12-35 12,0 35 12,5 12,8 12,0 12,17 2,5 104,11230.12-40 12,0 40 12,5 12,8 12,0 12,17 2,5 104,11230.12-45 12,0 45 12,5 12,8 12,0 12,17 2,5 104,11230.12-50 12,0 50 12,5 12,8 12,0 12,17 2,5 104,11230.12-55 12,0 55 12,5 12,8 12,0 12,17 2,5 104,11230.12-60 12,0 60 12,5 12,8 12,0 12,17 2,5 104,11230.12-65 12,0 65 12,5 12,8 12,0 12,17 2,5 104,11230.12-70 12,0 70 12,5 12,8 12,0 12,17 2,5 104,11230.12-75 12,0 75 12,5 12,8 12,0 12,17 2,5 104,11230.12-80 12,0 80 12,5 12,8 12,0 12,17 2,5 104,11230.12-85 12,0 85 12,5 12,8 12,0 12,17 2,5 104,11230.12-90 12,0 90 12,5 12,8 12,0 12,17 2,5 104,11230.12-95 12,0 95 12,5 12,8 12,0 12,17 2,5 104,1

1230.12-100 12,0 100 12,5 12,8 12,0 12,17 2,5 104,11230.12-120 12,0 120 12,5 12,8 12,0 12,17 2,5 104,11230.12-130 12,0 130 12,5 12,8 12,0 12,17 2,5 104,11230.12-140 12,0 140 12,5 12,8 12,0 12,17 2,5 104,11230.12-150 12,0 150 12,5 12,8 12,0 12,17 2,5 104,11230.12-160 12,0 160 12,5 12,8 12,0 12,17 2,5 104,1

PINS

& W

ASHE

RS

P1231MaterialStainless steel AISI 304 S31 equivalent to ISO A2.

Technical NotesTo ISO 8752.Slotted springs consist of a single coil of spring steel with an open slot sufficiently wide enough to enable the pin to reduce in diameter as it is driven into the hole.Length tolerances:-1-10mm long - ±0,2512-50mm long - ±0,50over 50mm long - ±0,75

Sold in packs of 10.The ends of the pin have a bevelled chamfer. they are designed for plain drilled holes, but a countersink makes assembly easier, especially for the ISO 8752 type. Slotted pins are normally supplied in the heavy duty form to ISO 8752, but a light duty version can be supplied to ISO 13337.Length tolerances:-1-10mm long - ±0,2512-50mm long - ±0,50over 50mm long - ±0,75Sold in packs of 10.Pins with a nominal diameter of 10mm or greater may be delivered with one chamfer.For larger sizes, see following pages.

TipsWhere pins are to be installed in plastic it is recommended that they are de-oiled before use to avoid embrittlement of the plastic.

Slotted Spring Pins - stainless steelISO 8752


min.Exp. dia.

max.Hole size

min.Hole size

max.Material

Thickness

DoubleShear

Strength kN

P1231.1,0-004 1,0 4 1,2 1,3 1,0 1,10 0,2 0,4P1231.1,0-005 1,0 5 1,2 1,3 1,0 1,10 0,2 0,4P1231.1,0-006 1,0 6 1,2 1,3 1,0 1,10 0,2 0,4P1231.1,0-008 1,0 8 1,2 1,3 1,0 1,10 0,2 0,4P1231.1,0-010 1,0 10 1,2 1,3 1,0 1,10 0,2 0,4P1231.1,0-012 1,0 12 1,2 1,3 1,0 1,10 0,2 0,4P1231.1,0-014 1,0 14 1,2 1,3 1,0 1,10 0,2 0,4P1231.1,0-016 1,0 16 1,2 1,3 1,0 1,10 0,2 0,4P1231.1,0-018 1,0 18 1,2 1,3 1,0 1,10 0,2 0,4P1231.1,0-020 1,0 20 1,2 1,3 1,0 1,10 0,2 0,4

P1231.1,5-004 1,5 4 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-005 1,5 5 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-006 1,5 6 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-008 1,5 8 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-010 1,5 10 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-012 1,5 12 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-014 1,5 14 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-016 1,5 16 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-018 1,5 18 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-020 1,5 20 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-022 1,5 22 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-024 1,5 24 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-026 1,5 26 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-028 1,5 28 1,7 1,8 1,5 1,60 0,3 0,98P1231.1,5-030 1,5 30 1,7 1,8 1,5 1,60 0,3 0,98


PINS & WASHERS



Sold in packs of 10.The ends of the pin have a bevelled chamfer. they are designed for plain drilled holes, but a countersink makes assembly easier, especially for the ISO 8752 type. Slotted pins are normally supplied in the heavy duty form to ISO 8752, but a light duty version can be supplied to ISO 13337.Length tolerances:-1-10mm long - ±0,2512-50mm long - ±0,50over 50mm long - ±0,75Sold in packs of 10.Pins with a nominal diameter of 10mm or greater may be delivered with one chamfer.For smaller sizes, see previous pages.For larger sizes, see following pages.



min.Exp. dia.

maxHole size

min.Hole size

max.Material

Thickness

DoubleShear

Strength kN


P1231.3,0-004 3,0 4 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-005 3,0 5 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-006 3,0 6 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-008 3,0 8 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-010 3,0 10 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-012 3,0 12 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-014 3,0 14 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-016 3,0 16 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-018 3,0 18 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-020 3,0 20 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-022 3,0 22 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-024 3,0 24 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-026 3,0 26 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-028 3,0 28 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-030 3,0 30 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-035 3,0 35 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-040 3,0 40 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-045 3,0 45 3,3 3,5 3,0 3,10 0,6 4,07P1231.3,0-050 3,0 50 3,3 3,5 3,0 3,10 0,6 4,07

P1231.3,5-004 3,5 4 3,8 4,0 3,5 3,62 0,7 5,80P1231.3,5-005 3,5 5 3,8 4,0 3,5 3,62 0,7 5,80P1231.3,5-006 3,5 6 3,8 4,0 3,5 3,62 0,7 5,80P1231.3,5-008 3,5 8 3,8 4,0 3,5 3,62 0,7 5,80P1231.3,5-010 3,5 10 3,8 4,0 3,5 3,62 0,7 5,80P1231.3,5-012 3,5 12 3,8 4,0 3,5 3,62 0,7 5,80P1231.3,5-014 3,5 14 3,8 4,0 3,5 3,62 0,7 5,80P1231.3,5-016 3,5 16 3,8 4,0 3,5 3,62 0,7 5,80

PINS

& W

ASHE

RS






min.Exp. dia.

max.Hole size

min.Hole size

max.Material

Thickness

DoubleShear

Strength kN

P1231.3,5-018 3,5 18 3,8 4,0 3,5 3,62 9,06 5,80P1231.3,5-020 3,5 20 3,8 4,0 3,5 3,62 9,06 5,80P1231.3,5-022 3,5 22 3,8 4,0 3,5 3,62 9,06 5,80P1231.3,5-024 3,5 24 3,8 4,0 3,5 3,62 9,06 5,80P1231.3,5-026 3,5 26 3,8 4,0 3,5 3,62 9,06 5,80P1231.3,5-028 3,5 28 3,8 4,0 3,5 3,62 9,06 5,80P1231.3,5-030 3,5 30 3,8 4,0 3,5 3,62 9,06 5,80P1231.3,5-035 3,5 35 3,8 4,0 3,5 3,62 9,06 5,80P1231.3,5-040 3,5 40 3,8 4,0 3,5 3,62 9,06 5,80P1231.3,5-045 3,5 45 3,8 4,0 3,5 3,62 9,06 5,80P1231.3,5-050 3,5 50 3,8 4,0 3,5 3,62 9,06 5,80

P1231.4,0-004 4,0 4 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-005 4,0 5 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-006 4,0 6 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-008 4,0 8 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-010 4,0 10 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-012 4,0 12 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-014 4,0 14 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-016 4,0 16 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-018 4,0 18 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-020 4,0 20 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-022 4,0 22 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-024 4,0 24 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-026 4,0 26 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-028 4,0 28 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-030 4,0 30 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-035 4,0 35 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-040 4,0 40 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-045 4,0 45 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-050 4,0 50 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-055 4,0 55 4,4 4,6 4,0 4,12 11,24 7,25P1231.4,0-060 4,0 60 4,4 4,6 4,0 4,12 11,24 7,25

P1231.5,0-006 5,0 6 5,4 5,6 5,0 5,12 17,54 10,75P1231.5,0-008 5,0 8 5,4 5,6 5,0 5,12 17,54 10,75P1231.5,0-010 5,0 10 5,4 5,6 5,0 5,12 17,54 10,75P1231.5,0-012 5,0 12 5,4 5,6 5,0 5,12 17,54 10,75P1231.5,0-014 5,0 14 5,4 5,6 5,0 5,12 17,54 10,75P1231.5,0-016 5,0 16 5,4 5,6 5,0 5,12 17,54 10,75P1231.5,0-018 5,0 18 5,4 5,6 5,0 5,12 17,54 10,75P1231.5,0-020 5,0 20 5,4 5,6 5,0 5,12 17,54 10,75P1231.5,0-022 5,0 22 5,4 5,6 5,0 5,12 17,54 10,75P1231.5,0-024 5,0 24 5,4 5,6 5,0 5,12 17,54 10,75P1231.5,0-026 5,0 26 5,4 5,6 5,0 5,12 17,54 10,75P1231.5,0-028 5,0 28 5,4 5,6 5,0 5,12 17,54 10,75

PINS & WASHERS






min.Exp. dia.

max.Hole size

min.Hole size

max.Material

Thickness

DoubleShear

Strength kN

P1231.5,0-030 5,0 30 5,4 5,6 5,0 5,12 1,0 10,75P1231.5,0-035 5,0 35 5,4 5,6 5,0 5,12 1,0 10,75P1231.5,0-040 5,0 40 5,4 5,6 5,0 5,12 1,0 10,75P1231.5,0-045 5,0 45 5,4 5,6 5,0 5,12 1,0 10,75P1231.5,0-050 5,0 50 5,4 5,6 5,0 5,12 1,0 10,75P1231.5,0-055 5,0 55 5,4 5,6 5,0 5,12 1,0 10,75P1231.5,0-060 5,0 60 5,4 5,6 5,0 5,12 1,0 10,75P1231.5,0-065 5,0 65 5,4 5,6 5,0 5,12 1,0 10,75P1231.5,0-070 5,0 70 5,4 5,6 5,0 5,12 1,0 10,75P1231.5,0-075 5,0 75 5,4 5,6 5,0 5,12 1,0 10,75P1231.5,0-080 5,0 80 5,4 5,6 5,0 5,12 1,0 10,75

P1231.6,0-008 6,0 8 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-010 6,0 10 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-012 6,0 12 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-014 6,0 14 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-016 6,0 16 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-018 6,0 18 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-020 6,0 20 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-022 6,0 22 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-024 6,0 24 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-026 6,0 26 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-028 6,0 28 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-030 6,0 30 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-035 6,0 35 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-040 6,0 40 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-045 6,0 45 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-050 6,0 50 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-055 6,0 55 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-060 6,0 60 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-065 6,0 65 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-070 6,0 70 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-075 6,0 75 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-080 6,0 80 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-085 6,0 85 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-090 6,0 90 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-095 6,0 95 6,4 6,7 6,0 6,12 1,2 16,17P1231.6,0-100 6,0 100 6,4 6,7 6,0 6,12 1,2 16,17

P1231.8,0-008 8,0 8 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-010 8,0 10 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-012 8,0 12 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-014 8,0 14 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-016 8,0 16 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-018 8,0 18 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-020 8,0 20 8,5 8,8 8,0 8,15 1,5 26,46

PINS

& W

ASHE

RS



Sold in packs of 10.The ends of the pin have a bevelled chamfer. they are designed for plain drilled holes, but a countersink makes assembly easier, especially for the ISO 8752 type. Slotted pins are normally supplied in the heavy duty form to ISO 8752, but a light duty version can be supplied to ISO 13337.Length tolerances:-1-10mm long - ±0,2512-50mm long - ±0,50over 50mm long - ±0,75Sold in packs of 10.Pins with a nominal diameter of 10mm or greater may be delivered with one chamfer.For smaller sizes, see previous pages.



min.Exp. dia.

max.Hole size

min.Hole size

max.Material

Thickness

DoubleShear

Strength kN

P1231.8,0-022 8,0 22 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-024 8,0 24 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-026 8,0 26 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-028 8,0 28 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-030 8,0 30 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-035 8,0 35 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-040 8,0 40 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-045 8,0 45 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-050 8,0 50 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-055 8,0 55 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-060 8,0 60 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-065 8,0 65 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-070 8,0 70 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-075 8,0 75 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-080 8,0 80 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-085 8,0 85 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-090 8,0 90 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-095 8,0 95 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-100 8,0 100 8,5 8,8 8,0 8,15 1,5 26,46P1231.8,0-120 8,0 120 8,5 8,8 8,0 8,15 1,5 26,46

P1231.10,0-010 10,0 10 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-012 10,0 12 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-014 10,0 14 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-016 10,0 16 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-018 10,0 18 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-020 10,0 20 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-022 10,0 22 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-024 10,0 24 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-026 10,0 26 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-028 10,0 28 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-030 10,0 30 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-035 10,0 35 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-040 10,0 40 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-045 10,0 45 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-050 10,0 50 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-055 10,0 55 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-060 10,0 60 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-065 10,0 65 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-070 10,0 70 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-075 10,0 75 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-080 10,0 80 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-085 10,0 85 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-090 10,0 90 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-095 10,0 95 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-100 10,0 100 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-120 10,0 120 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-130 10,0 130 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-140 10,0 140 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-150 10,0 150 10,5 10,8 10,0 10,15 2,0 42,14P1231.10,0-160 10,0 160 10,5 10,8 10,0 10,15 2,0 42,14

Date post:	01-Dec-2014
Category:	Documents
Upload:	radugorj
View:	99 times
Download:	1 times

Catalog Dowels and Other Pins

Documents