CatalogGARAGEEQUIPMENT
www.actia.com
YOUR PARTNER FOR GARAGE EQUIPMENT
YOUR SALES ADVISOR
2
THE ACTIA GROUPIn 2003, the ACTIA group, which partners leading carmakers in the design, diagnostic and manufacture of onboard systems, acquired MULLER BEM, a benchmark for equipment for garages and technical inspections since 1919.
This acquisition saw the birth of our complete range of electronic diagnostics systems, garage equipment and technical inspection lines. Designed, developed and made in France, this range meets the stringent requirements of the key players on the international market. With its strong roots in the automotive sector, our technology benefits from the force of the ACTIA group and the responsiveness of a company that operates on a human scale.
ACTIA has produced more than 20,000 technical inspection lines and sold more than 15,000 diagnostic tools, offering a complete service in almost 140 countries.
Don’t wait any longer.Choose ACTIA now!
GUARANTEEING A HIGH LEVEL OF QUALITYDesigned and developed in France, ACTIA’s products are made on the group’s manufacturing sites. A certified environment with high-tech industrial equipment, ACTIA production plants comply with the very strict requirements of the automotive and aeronautics sectors, another area of activity for the ACTIA group.
DELIVERING EFFICIENT SERVICES CLOSE TO OUR CUSTOMERSACTIA supports its customers by offering services on a human scale all over the world. Some 40 agents and distributors, including 20 ACTIA group subsidiaries, provide support and services for ACTIA equipment in 140 countries.
Leading carmakers, technical inspection centre networks and automotive after-sales operators trust us because we have been right there by their side, listening closely, for 90 years.
3
CONTENTS
ENJOY OUR GARAGE EQUIPMENT WEB SITE
workshop-equipments.com
4
6. MULTI-MAKE DIAGNOSTICS
10. AIR CONDITIONING STATIONS
14. SUSPENSION AND WHEELS
24. EMISSIONS
26. LV LIFT
27. PRE-PERIODICAL VEHICLE INSPECTION
28. OUR SERVICES
5
MULTI-MAKE DIAGNOSTICS
MORE THAN 50,000 USERS
TRUST US. WHAT ABOUT YOU?Multi-Diag delivers precise electronic diagnostics and a clear report that informs customers of the actions taken to illustrate the value of your services. ACTIA’s range of services includes installation and start-up, a qualified technical hot line, regular upgrades, warranty extensions, etc.
The diagnostic functions can be accessed quickly and easily for all major automobile makes:
• Automatic VIN detection on OBD-compatible vehicles.• Maintenance control period reset.• Reading / clearing DTCs.• Reading of parameters (graphic representation).• Testing of actuators.• ECU configuration.• Remote encoding functions.
And many more!
DISCOVER THE ACTIA MULTI-DIAG RANGE
www.multidiag.com
6
MULTI-PROTOCOL BLUETOOTH VEHICLE INTERFACE (FULL EURO 5)
• MOBILE, thanks to the Bluetooth technology.• PRACTICAL. No need for adapters for the new CAN communications protocols. The built-in multiplexer allows for easy
interventions on even the most recent vehicles.• THIS RAPID, high-performance tool divides the operation communication times on vehicle electronics by three.• SAVE MONEY, because you no longer need to buy adapter cables, and boost your productivity.
MULTI-DIAG XG MASTER The ruggedised diagnostics station designed for workshops P/N: AC966770KP
• 13.3” colour touch screen ruggedised tablet.• Windows 7 operating system.• Built-in Bluetooth and Wi-Fi module.• Vehicle interface.• 16-pin OBD cable.• Mains charger and carry case.• Two USB ports, one SD card port.• IP54 certified.• External DVD drive.• Docking station (optional)*
MULTI-DIAG MOBILE 3 The lightweight and compact tablet version P/N: AC967931
• 10.1” colour touch screen tablet• Windows 10 operating system.• Dual-material anti-slip protective cover.• The strap can be attached to the arm and steering wheel.• External DVD drive.• Webcam.• Built-in Bluetooth and Wi-Fi module.• Vehicle interface.• 16-pin OBD cable.• Mains charger.
MULTI-DIAG XG MASTER TRUCKS The ruggedised diagnostics station for harsh environments Also available with the Mobile 3 tablet
• 13.3” colour touch screen ruggedised tablet.• Windows 7 operating system.• Built-in Bluetooth and Wi-Fi module.• Multi-protocol Bluetooth vehicle interface.• 16-pin OBD cable.• Mains charger and carry case.• Two USB ports, one SD card port.• IP54 certified.• External DVD drive.• Docking station (optional)*.
*Three USB ports, audio - video - Ethernet ports, IP40-certified
7
Direct access to our assistance services and document repositories
Display of DTCs from the entire vehicle Clear DTCs in a single click
Number of DTCs and Multi-Diag 360 servicesassociated with each system
Take the shortcuts...More than 80,000 cases taken directly from more than 13 years of experience in Multidiag assistance
One symptom = one cause...and therefore, one solution
DIRECTORY OF FAULTS AND REPAIRS ALREADY SOLVED BY THE HOTLINE
I can access all of ACTIA’s knowledge with the practical cases
Guided methods are the GPS of troubleshooting, offering step-by-step guidance until the problem is solved.
ONLINE VEHICLE FAULT SEARCH ENGINE AVAILABLE IN THE TOOL
Power supply, internal component resistance, continuity, etc.
Perform the tests under the guidance of the method by answering Yes or No, and quickly identify the right solution the first time around.
8
The parts info identifies the part to be replaced and allows me to check whether it is available in my distributor’s catalogue.
No vehicles hold any secrets for me, thanks to the technical database
Complete and dynamic servicing schedules, repair methods, electrical diagrams, wiring diagrams, etc.
Settings, tightening torques, quantities, positions, IDs, environmental data, etc.
SMART SHORTCUTS OFFERING DIRECT ACCESS TO THE RELEVANT INFORMATION
After checking the usage, and depending on the part incriminated by the DTC, I have direct access to the part number and I can check whether it is available in my distributor’s catalogue.
DIRECT ACCESS TO MY DISTRIBUTOR’S PARTS CATALOGUE FROM THE TOOL
9
AIR CONDITIONING STATIONS
EUROPEAN REGULATIONSWith our range of air conditioning stations, we can offer equipment that stays one step ahead of the requirements of European regulations applying to refrigerant fluids.
SERVICESOur range of made-to-measure services allows you to workin complete peace of mind:
• Training.• Maintenance contracts.• Warranty extensions.• Credit options.
10
DISTRIBUTOR RANGE
ACM 2400HFC/HFO Automatic R134a or HFO1234yf
Automatic functions• Recovery.• Oil change.• Vacuum extraction.• Oil charge.• Tracing agent charge.• Gas charge.
ACM 3400HFC/HFO Fully automatic R134a or HFO1234yf
Automatic functions• Hybrid or electric vehicle functions.• Dynamic diagnostic function on HFCs.• Leak test function with nitrogen.• Opening and closing of HP-LP valves.• Recovery.• Oil change.• Vacuum extraction.• Oil charge.• Tracing agent charge.• Gas charge.
REFRIGERANT TRACEABILITY
INTEGRATED
AND SIMPLIFIED
ACM 3400-2GP Fully automatic R134a and HFO1234yf
Automatic super station to separately recover, recycle and top up R134a and R1234yf refrigerants. The ACM 3400-2GP offers an economical solution to performing operations on the air conditioning circuits in all current and future vehicles (two stations in one). This station also features a function for hybrid vehicles. Its compact design saves space in the workshop. It is equipped with a large colour touch screen.
Automatic functions• Opening and closing of HP-LP valves.• Recovery.• Oil change.• Vacuum extraction.• Oil charge.• Tracing agent charge.• Gas charge.
11
CARMAKER RANGE
ECK 1800HFC/HFO Automatic R134a or HFO1234yf
Automatic functions• Recovery.• Oil change.• Vacuum extraction.• Oil charge.• Tracing agent charge.• Gas charge.
ECK 3500HFC/HFO Fully automatic R134a or HFO1234yf
Automatic functions• Hybrid or electric vehicle functions.• Dynamic diagnostic function on HFCs.• Leak test function with nitrogen.• Opening and closing of HP-LP valves.• Recovery.• Oil change.• Vacuum extraction.• Oil charge.• Tracing agent charge.• Gas charge.
REFRIGERANT TRACEABILITY
INTEGRATED
AND SIMPLIFIED
ECK TWIN Fully automatic R134a and HFO1234yf
Automatic super station to separately recover, recycle and top up R134a and R1234yf refrigerants. The ACM 3400-2GP offers an economical solution to performing operations on the air conditioning circuits in all current and future vehicles (two stations in one). This station also features a function for hybrid vehicles. Its compact design saves space in the workshop. It is equipped with a large colour touch screen.
Automatic functions• Opening and closing of HP-LP valves.• Recovery.• Oil change.• Vacuum extraction.• Oil charge.• Tracing agent charge.• Gas charge.• Approved by numerous carmakers.
12
ECK 3500HFC/HFO Fully automatic R134a or HFO1234yf
Automatic functions• Hybrid or electric vehicle functions.• Dynamic diagnostic function on HFCs.• Leak test function with nitrogen.• Opening and closing of HP-LP valves.• Recovery.• Oil change.• Vacuum extraction.• Oil charge.• Tracing agent charge.• Gas charge.
ECK 3900HFC/HFO Fully automatic R134a or HFO1234yf
Automatic functions• Hybrid or electric vehicle functions.• Dynamic diagnostic function on HFCs.• Leak test function with nitrogen.• Opening and closing of HP-LP valves.• Recovery.• Oil change.• Vacuum extraction.• Oil charge.• Tracing agent charge.• Gas charge.• Approved by numerous carmakers.
ECK 4000 Fully automatic HFO1234yf
Automatic functions• Hybrid or electric vehicle functions.• Dynamic diagnostic function on HFCs.• Leak test function with nitrogen.• Opening and closing of HP-LP valves.• Recovery.• Oil change.• Vacuum extraction.• Oil charge.• Tracing agent charge.• Gas charge.• Approved by numerous carmakers.
ECK BUS Fully automatic R134a
Automatic functions• Recovery.• Oil change.• Vacuum extraction.• Oil charge.• Tracing agent charge.• Gas charge.
Specific features• 40-litre cylinder• Gear pump• Complete database• 170-litre/min. vacuum pump• Leak test with nitrogen• 6-m HP/LP pipes
13
A COMPLETE RANGEThe ACTIA range is designed for reliability and performance. These modulable tyre changers are designed to work with the optional assistants that enable very rigid or “Run Flat” technology tyres to be fitted and removed easily.
• Dual rotation director.• Pre-setting cursor on the level.• Self-centring mandrel.• Intuitive and progressive controls.• Strengthened unhooking design.• Tool support located nearby.• Twin-speed.
BECAUSE YOUR ACTIVITY IS UNIQUEWe advise you on a choice of products that provide you with the best solutions day after day:
STARTThe complete solution forregular activity that is not intensive
SILVERProducts designed specificallyto exceed your demands
GOLDAn ultra-intensive andlong-lasting range
SUSPENSION AND WHEELS TYRE CHANGER
14
TYRE CHANGER 4989PRO-PLUS
Main technical data• Tightening on the interior of the rim: 12" - 34".• Max. wheel width: 406 mm (16").• Max wheel diameter: 1,200 mm (47").• Separator force: 12,040 N.• Working pressure: 8 - 10 bars.• Power supply: 220V-1ph - 50/60 Hz.• Motor power: 0.75 kW.• Dual rotation speed: 7 - 16 rpm.
TYRE CHANGER 4987PRO2
Main technical data• Tightening on the interior of the rim: 12" - 28".• Tightening on the exterior of the rim: 10" - 26".• Max. wheel width: 380 mm (15").• Max wheel diameter: 1,000 mm (39").• Separator jack force: 3.2 t.• Working pressure: 10 bars.• Power supply: 400V three-phase - 50 Hz,available
with 230V.• Motor power: 0.8 - 1.1 kW.• Dual rotation speed: 7 - 14 rpm.
TYRE CHANGER 4888DM-2VP
Main technical data• Tightening on the interior of the rim: 12" - 23".• Tightening on the exterior of the rim: 10" - 20".• Max. wheel width: 360 mm (14").• Max wheel diameter: 1,100 mm (43").• Separator jack force: 2.5 t.• Working pressure: 8 - 10 bars.• Power supply: 400V three-phase.• Motor power: 0.75 kW.• Dual rotation speed: 7 - 14 rpm.
15
PRECISE, SIMPLE, AND COMPLETEThe ACTIA range is designed for the quick and highly precise balancing of all types of steel, aluminium, Run Flat, 4x4, LCV, motorbike and scooter wheel rims.
Options can be selected easily in the settings menu and a number of programmes are available for different types of rims:
• Standard programme for steel and aluminium rims.• Special programmes for aluminium rims.• A programme of selected plans.• A programme for hidden weights.• A programme for optimal tyre fitting.• Balancing precision within 1 g.• Readout in grammes or ounces.• Measurements in inches or millimetres.• Self-diagnostic, self-calibration, self-gauging.• Automatic minimisation of residual static imbalance.
ACCESSORIES INCLUDED• Set of three Ø 45÷110 mm cones.• Quick-tightening nut (manual).• Width gauge.• Hammer pliers.• 60 g calibration weight.
SUSPENSION AND WHEELS WHEEL BALANCERS
16
WHEEL BALANCER 3618
Main technical data• Rim width: 1.5" - 20" / 40 - 510 mm.• Rim diameter: 10" - 30" / 265 - 765 mm.• Automatic offset and diameter entry.• Automatic width entry: Evaluation.• Speed of rotation: 100 rpm.• Average length of the measurement cycle: 4.7 sec.• Shaft lock (wheel at a standstill).• Protective wheel cover: optional.• Total electric motor power: 1.5 kW.
WHEEL BALANCER 3607DM
Main technical data• Rim width: 1.5" - 20" / 40 - 510 mm.• Rim diameter: 10" - 26".• Speed of rotation: 100 rpm.• Average length of the measurement cycle: 6-8 sec.• Protective wheel cover: optional.• Total electric motor power: 0.8 kW.
WHEEL BALANCER 3618LA-KP
Main technical data• Rim width: 1.5" - 20" / 40 - 510 mm.• Rim diameter: 10" - 30" / 265 - 765 mm.• Automatic offset and diameter entry.• Automatic width entry: Sonar.• Speed of rotation: 100 rpm.• Average length of the measurement cycle: 4.7 sec.• Shaft lock (wheel at a standstill).• Protective wheel cover.• Total electric motor power: 1.5 kW.
AVAILABLE OPTIONS
Universal tray with studs for 36xx, 37xx and 38xx series balancers.• Rapid and multi-purpose, avoids looking for the right configuration.• For all rims with 3, 4, 5, and 6 holes.• Distance between centres adjustable between 75 and 210 mm.• Comes with short and long clip-on studs for the different types of rims.
Zero Weight wheel lift for series 3618. The ultimate in efficiency.• This wheel lift overcomes the effects of gravity and their consequences: fatigue, off-centring and rapid wear of the shaft and
the fitting tools. The lift is especially well suited to suspension and wheel specialists.
17
SUSPENSION AND WHEELS EXPERT SHOCK ABSORBER TESTER
SIMPLE TO USEThe expert tester performs a complete test on the vehicle’s shock absorbers in 3 minutes!
The shock absorbers are worn on more than one in four vehicles on the road. Boost your revenue from shock absorbers by 25% (the average increase amongst our customers that use this expert tester since 2007).
A REVOLUTIONARY EXPERT TESTER DESIGNED TO DIAGNOSE THE SHOCK ABSORBER.
The expert shock absorber tester represents a true technological breakthrough by analysing the shock absorber’s response to its variable resonance frequency. The result is totally independent of the tyre pressure and the vehicle load.
This highly precise shock absorber tester offers some decisive advantages:
• Easy to install.• Simple to use.• Quick results.• Reliable.• Certified
• Approved by equipment manufacturers: Tenneco/Monroe, KYB, Gabriel.
18
EXPERT SHOCK ABSORBER TESTER
Main technical data• Maximum axle load: 2,500 kg.• Maximum frequency: 25 Hz.• Minimum frequency: 3 Hz.• Excitation amplitude: +/- 3mm.• Phase measurement sensor: one per wheel.• Motor power 2 x 2.2 kW.• Minimum track between wheels: 836 mm.• Maximum track between wheels: 2,096 mm.• Vehicle passage height: 120 mm.
READOUT
Quick and intuitive readout on the screen.
PRINTOUT
Print out a report at the end of the test to show your customer the state of wear of the shock absorbers.
19
SUSPENSION AND WHEELS CDD WHEEL ALIGNERS
MEASURING HEADAll our models are equipped with high-technology CDD measuring heads.
Each head carries out two measurements by means of an integrated bidirectional camera equivalent to an eight-sensor system in the horizontal plane (patented by MULLER BEM).
AVAILABLE IN SEVERAL VERSIONSMany years of research have gone into the simple, clear, profitable and innovative ACTIA range of wheel aligners. The ACTIA wheel aligner systems, which are protected by 14 patents, are equipped with four high-technology measuring heads that use a bi-directional camera to take two measurements. They offer the following features:
• Four built-in radio-controlled heads.• A battery that lasts 10 hours when in use.• Reinforced structural arms.• The Quick 3 programme that indicates whether any adjustments
are necessary in just 3 minutes.• A simple and user-friendly user interface.
The graphical animations offer continual guidance.• Straightening in a quarter turn.• A free-wheels programme for use
on two-post lifts.• A printout of the report that can easily
be understood by customers.
20
8658 ECONOMICAL P/N: 8658-171P
8668 WITH RADIO P/N: 8668-171P
8668 HGV P/N: 8668-171PRPL
8678 FOR INTENSIVE USE P/N: 8678-20PR1
• Industrial PC.• A user-friendly programme running on Windows®.
• Maximum steering angle measurements (without any electronic pivoting plates)
8678 HGV P/N: 8678-20PRPL1
21
52" 4G
SUSPENSION AND WHEELS 4G WHEEL ALIGNERS
EXCLUSIVE PROFITABILITY39% OF VEHICLES REQUIRE WHEEL ALIGNMENT
Using the Quick Minute program - exclusive to ACTIA - 4G will help you to carry out an alignment diagnostic in less than one minute, including the time to fit the targets!
20% OF VEHICLES HAVE ADJUSTMENT ISSUES
4G offers you a world-exclusive mechanical diagnostics program to detect a defective part in an instant and ensure the safety of your settings.
52" 4G
SEE THE 4G WHEEL ALIGNER in action:
www.wheel-aligner-4g.com
THE INVENTOR OF THE WHEEL ALIGNMENT BENCHAs the inventors of the wheel alignment bench, we continue to strive for innovation and reliability by now offering 4G fourth-generation alignment. It has sparked a huge amount of interest among garage equipment professionals, distributors, central purchasing departments, journalists and the trade press.
High-resolution multi-camera measuring heads, 100% dynamic graphic interface, world-exclusive integrated mechanical diagnostics, unbreakable targets, etc. There has never been such a complete wheel aligner!
Certified
22
UNIVERSAL INSTALLATION
Unlike the various 3D alignment offers currently on the market, 4G can be installed in all conditions: under-wheel scissor lift, 4-post lift or pit. The measuring heads are attached on the sides on 180° Gallows.
EDUCATIONAL SOFTWARE
The new user interface is ground-breaking! The 3D graphic animations are simpler and easier than ever, offering assistance to users at every step of the installation or adjustments. Combining ergonomics with style, these animations ensure better monitoring of settings.
A clear and instructional report showing the state of play before setting and an assessment when it is completed. This report can be used to explain the faults found on the vehicle to the customer and to justify the intervention.
COMPOSITION AND OPTIONS
• Mobile support arm (1)• Wi-Fi tablet option (2)• Three high-resolution cameras (3)• Wire or Wi-Fi connection (4)• 27’’ full HD screen (5)• Windows PC (6)• Wi-Fi printer (7)
2 types of clamps with robust targets:
• Standard clamps (8)• Optional three-point clamps (9)
23
1
2
3
4
5
6
7
8
9
EMISSIONS
ACTI-OPA OPACIMETERThis opacimeter meets the standard NF R10-025 and technical instruction SRV F9-2.
The tripod-mounted opacimeter unit measures the opacity level of the exhaust fumes from diesel engines. The appliance can take measurements under stable conditions and when accelerating.
The ACTIGAS TOUCH version of the opacimeter communicates using Bluetooth. In acceleration tests, the system records the engine speed and the peak exhaust fume values.
ACTIGAS AT THE CUTTING EDGE OF TECHNOLOGYACTIGAS is the latest generation exhaust gas analyser that complies with the EC Directive for Measurement Instruments, the ISO 3929 standard and with SRV F9-1.
ACTIGAS uses a PC base that runs Windows 10 offering major scalability potential. The software application, which now treats 5 gases (NOx is optional), can easily be upgraded to meet new standards using the USB port.
This accuracy class 0 and OIML R99-compatible gas analyser platform is the most technically advanced version in terms of pollution control performance. The software is ideal for quick readings and compliance checks, while remaining easy to use so that operators can comfortably switch from one test to another.
THIS IS THE ONLY PRODUCT OF ITS KIND ON THE MARKET THAT USES ALL THE POSSIBILITIES OFFERED BY NETWORK AND IT TECHNOLOGIES.
24
START Available for petrol, diesel and combined engines
In this configuration, the mobile unit comes with:• A 22” flat screen to monitor the test remotely from the vehicle.• An oil temperature sensor.• A battery/cigar lighter type rev counter.• The gas measurement cell and/or the fumes measurement cell mounted on a tripod.• An industrial-strength ACTIA PC, including: - Windows 10. - An AZERTY keyboard and mouse. - 6xUSB, 4xRS232, 1xRJ45, 1xVGA.
A built-in CRT-mode plug-in OBD interface (optional) to retrievethe temperature and engine speed data.
TOUCH Available for petrol, diesel and combined engines
This configuration is based on START, plus the following as standard: • A 24” touch screen for greater convenience.• An infra-red thermometer.• An infra-red remote control.• An A4 printer.• The scalable NOx gas measurement cell and/or the fumes measurement cell
mounted on a tripod with wireless Bluetooth communications• A built-in CRT-mode OBD interface to retrieve the temperature and engine speed
data
REFERENCES START START + OBD TOUCH
Gas Analyser ACTIP-GAX ACTIP-GAX-OBDVL ACTIP-TOUCH-GAX
Opacimeter ACTIP-OPX ACTIP-OPX-OBDVL ACTIP-TOUCH-OPX
Combined LV gas + opacimeter ACTIP-GOX ACTIP-GOX-OBDVL ACTIP-TOUCH-GOX
Combined HGV gas + opacimeter • ACTIP-GOX-OBDPL •
24” touch screen. IR thermometer OBD interface Bluetooth opacimeter cell
25
VEHICLE
LIFTS
794/795 RANGE UNDER-WHEEL SCISSOR LIFTThe 794 (4.2 t) and 795 (5 t) series are specially designed to meet the needs and the imperatives of technical inspection centres. The options and accessories provide total adaptability to all types of uses.
735 3.5 T EXTRA-FLAT DOUBLE SCISSOR LIFTThe 735 model is an extra-flat under-wheel lift with a lifting capacity of 3.5 tonnes. This lift is specially designed for your customer reception area or the creation of an additional visual inspection station. It is quick and easy to install, without any need for a special structure, and the workshop remains uncluttered thanks to its compact dimensions.
NEED ANOTHER INSPECTION STATION?
Capacity 3,500 kg
Lifting and lowering time 35 sec.
Independent hydraulic circuits (total safety) 2
Clearance height 105 mm
Max. lift, free-standing version 1,945 mm
Ramp length 1,990 mm
Ramp width 640 mm
794/795 795-CT
Capacity 4.2 or 5 t 5 t
Lift height, free-standing version
1,850 mm 1,850 mm
Lift height, fitted version 2,085 mm 2,085 mm
Ramp lengths 5,500 mm 5,100 mm
Lifting time 45 sec. 45 sec.
Auxiliary lift capacity 4 t 3.5 t
Play plates option standard
Pivoting ramps for alignment checks
option -
2 t sliding lifting cross member (P/N)
795-902A 795-902A
26
PRE-TECHNICAL INSPECTION LIGHT VEHICLESBILANMATIC XG & 8000 MX
PRECISION Side slip tester with pressure releaseThe side slip tester connected to the inspection chain is used to measure slippage of the front and rear wheels and to diagnose vehicle drift. Thanks to its length and the pressure release plate, it can be used to make precise and repetitive measurements. Measurements are taken using digital technology and transmitted by multiplexed MODACQ. This guarantees reliable communication of the measurements without any interference. The side slip tester features an optical vehicle passage detector for greater durability.
PERFORMANCE Brake test bench, P/N 43300$AX411030 This is the best-selling brake test bench in France and complies with the standard NF R63-701 and with SR/V 003D. It is renowned for its high performance, robustness and ease of use.
• Performance: Thanks to its large passage, this bench can be used to test vehicles from small cars to wide-track campervans.
• Reliability: Wear of the test bench is minimised by the high axle load and the powerful motors.
• Ease of use: The brake motors and raised rear rollers prevent ejection when braking.
RELIABILITY Suspension test bench, P/N 46600$0033This test bench measures the asymmetry of the suspension using the EUSAMA method, guaranteeing excellent repeatability of the measurements and a precise analysis of damping on the left- and right-hand sides. It is the only bench on the market that can dynamically test vehicles with an axle weight of 2.5 t and statically test vehicles with an axle weight of 3 t. The motors are sufficiently powerful to prevent wheel spin and, therefore, rapid wear of the drive belts.
HIGH TECHNOLOGYThe BilanMatic features simple and easy-to-use new software, offering all the essential functions. The operator is guided throughout the inspection. It is the fruit of Muller BEM’s 25 years of experience in the world of technical inspections. The BilanMatic runs on Windows and the console includes an illuminated triangle that can be personalised in your own colours.
Designed to the same standards of reliability and performance as its predecessors, the BilanMatic offers owners of vehicle inspection centres connected hardware with tools that they can use to manage their investment in real time.
27
REPAIRS NO MATTER WHERE YOU AREACTIA’s After-Sales technicians are specially trained and equipped to repair all your equipment as quickly as possible, in accordance with the type of contract you have signed.
OUR SERVICES AND CONTRACTS
PROTECT YOUR INVESTMENTSBy opting for a maintenance contract, you can improve your productivity while protecting your investments. Proper maintenance extends the lifespan of your equipment and limits stoppages. Your activity can continue and help to improve the quality of service delivered to your customers.
Thanks to our maintenance contracts, your equipment will always meet all the normative requirements (metrological inspections, vehicle lift safety).
HELPING YOU TO GET STARTEDOur After-Sales teams and our partners install your equipment all over the world. We make pre-installation visits, produce the drawings, lay the cables, make the connections and perform all the operating tests of your ACTIA equipment.
In this way, we can guarantee that the configuration meets carmakers’ recommendations and the applicable safety standards.
One of our specialised technicians will be by your side to help you to get started, to guide you in the use of your new equipment, to offer advice on maintenance, to explain the safety rules and to remind you of the legal requirements that you have to meet.
28
OUR MULTI-DIAG SERVICE AGREEMENT: compulsorysubscriptionforthefirstyear
ONLINE SERVICES included. Use our online help services on our product web sites.STAY CONNECTED TO OUR ONLINE COMMUNITY!
UPDATES of software and databases included.SERVICE EVEN THE VERY LATEST MODELS!
WARRANTY included for your tool and your communications interface.DON’T WORRY. YOU’RE COVERED!
ASSISTANCE by telephone or email included for any questions about your tools.NEVER HESITATE TO CONTACT OUR TECHNICIANS!
STANDARD EXCHANGE of your equipment in 24h-48h included.AVOID PRODUCTION STOPPAGES. EXCLUSIVE TO ACTIA!
MAINTENANCE BY OUR DISTRIBUTORS*: annual subscriptions
CALIBRATION of your equipment when our technicians visit you. PRECISION AND MAINTENANCE ALL IN ONE!
UPDATES of software and databases according to the terms of our contracts.SERVICE EVEN THE VERY LATEST MODELS!
CONSUMABLES when we visit you according to the terms of our contracts.A SURPRISE-FREE CONTRACT FOR GREATER PEACE OF MIND!
PREVENTIVE MAINTENANCE of your equipment according to the terms of our contracts.KEEP YOUR EQUIPMENT IN PERFECT CONDITION!
TRAINING on your equipment when our technicians visit you.MAINTAIN THE SKILLS OF YOUR PERSONNEL!
ASSISTANCE by telephone or email for any questions about your tools.STAY CONNECTED TO OUR TECHNICAL TEAMS!
REPAIRS of your equipment in 24h-72h according to the terms of our contracts.PREVENT PRODUCTION STOPPAGES!
*CONTACT YOUR DISTRIBUTOR FOR MORE DETAILS ABOUT OUR SERVICES AND PRICES.
29
CONTACT US
ANSWERING ALL YOUR REQUESTS
ACTIA answers all your requests. Every member of our sales, after-sales or assistance teams is specialised in a specific field in order to respond as quickly as possible and to identify your precise need.
On the technical front, if you need to restore your equipment to proper working order, or if you need advice or on-site assistance, our team of technicians is at your disposal to respond as quickly as possible.
We will answer all your questions and meet all your needs, no matter which level of service you are subscribed to. See our opening hours opposite and do not hesitate to contact us be email. We will call you back.
NEED SOMETHING? CONTACT US!
DID YOU KNOW?The satisfaction rate of our customers with the action taken by our 40 after-Sales technicians, who are there to help at all times,
is95% !
Survey of 500 customers in December 2016 by ESSEC Solutions Entreprises.
30
ACTIA AUTOMOTIVEHead office5, rue Jorge SemprumB.P. 74215 - 31432 TOULOUSE cedex 4FRANCE
The content (text and photos) of this document is not contractualand subject to change, especially technical.
Copyright © ACTIA - P/N.: CATALOGUE-EXEN-02/2019 (DOC R5/01 V7)