Specifications/FeaturesTape LightFlexible, low voltage linear LED accent lighting system provides high quality illumination for many indoor applications including: Display Lighting, Under Cabinet, Cove and Soffit, Accent and Edge Lighting.High output LEDs provide excellent luminous intensities at low drive currents, resulting in low power consumption and consistent, stable performance, delivering 440 lumens (Delivered lumens based on 1ft. of 3000K tape).Modular “plug and play” system features a wide range of power supplies, controllers and connectors. System is easy to install with no need for field soldering.The TLT Super High Output tapelight series is available in six color temperatures: 2200K, 2700K, 3000K, 3500K, 4000K, and 6500K, as well as four colors: blue, green, red, and yellow. Colors are not available in Continuous Reel.TLT Series tapelight is dimmable using any of the TL series dimming controls.Available in 20' reels consisting of connected, individual 12" or 4" segments. Can also be purchased in individual segments.Each segment includes male and female connector ends for continuous linear installations. Each 12" segment can also be cut (on the cut lines) in 4" increments to provide optimal fit and flexibility for any installation. SHO Tapelight is also available in 16' continuous reels (without mid-connectors); includes one female and one male end connector per reel.Reel may be cut in 4" increments to provide optimal fit and flexibility for any installation. Use with output connector or female-to-female connector to power cut segment of tape.
MountingThe TLT tapelight is easy to install using the 3M double sided adhesive on each segment; tape can be directly mounted to most surfaces. For additional thermal heatsinking, protection of the LEDs and an overall cleaner aesthetic, using the aluminum mounting channel (standard, recessed, or angled) is recommended. The aluminum mounting channel is easily installed utilizing the appropriate set of mounting clips.For added protection of the LEDs, as well as subtle diffusion and glare control, a clear or frosted lens may be used. The lens must be used with the aluminum channel and is easily installed by simply pressing the lens into the channel.
WarrantyThis product is covered by ConTech's full replacement guarantee after date of purchase: Five (5) year replacement guarantee when tape light is installed using the aluminum mounting channel; Three (3) year replacement guarantee when installed without the aluminum mounting channel.System designed and rated for 50,000 hours at 70% lumen maintenance when mounted in ConTech channel.
ListingcCSAus Certified to UL standards. Suitable for dry or damp locations. Not suitable for wet locations.
TLT Tapelight Series12VDC Damp Location Super High Output Flexible Tapelight
www.contechlighting.com1-847-559-5500 All specifications subject to change without notice.RecyclePlease
1/8"
5/16"
4" or 12" Individual Segments or 16' Continuous Reel
Catalog No.
Type
Project
ConTech STANDARD HIGH SUPER HIGH SIDE EMITTING SIDE EMITTING POWER SUPPLY OUTPUT OUTPUT OUTPUT RGB1 STD. OUTPUT HIGH OUTPUT INPUT VOLTAGE: 12V DC 0.7W/FT 1.45W/FT 3.24W/F 3.9W/FT 0.65W/FT 1.4W/FTMODEL NO. WATTAGE MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX MAX RUN SPLIT RUN SPLIT RUN SPLIT RUN SPLIT RUN SPLIT RUN SPLIT TPL12VHW20 20W 14FT 14FT 10FT 10FT 5FT 5FT 5FT 5FT 30FT 30FT 14FT 14FTTLP12VP24 24W 17FT 17FT 12FT 12FT 6FT 6FT 5.5FT 5.5FT 32FT 34FT 17FT 17FTTLP12VP36 36W 22FT 26FT 17FT 17FT 10FT 10FT 7FT 9FT 32FT 50FT 22FT 26FTTLP12VP60 60W 22FT 36FT 17FT 28FT 12FT 16FT 7FT 10FT 32FT 78FT* 22FT 40FTTLP12VHW60 60W 22FT 36FT 17FT 28FT 12FT 16FT 7FT 10FT 32FT 78FT* 22FT 40FTTLP12VHW60 277 60W 22FT 36FT 17FT 28FT 12FT 16FT 7FT 10FT 32FT 78FT* 22FT 40FT
1. RGB Is at full power (all three LEDs are illuminated). Power consumption may vary based on color changing program.*Max split can be split more than once, without exceeding the max single run in each leg.
• Max Run refers to the total single run of tapelight that can go on a power supply. Max Split refers to the total amount of tapelight that can go on a driver if it were separated into two runs.• Max Run lengths are calculated with 12V DC at the start of the tape run. Voltage drop may occur if not using proper wire gauge. Please refer to the Power Supply Wiring Chart.• Max Run lengths above are calculated with no more than 30% light loss from the start of the tape run to the end of the tape run for optimal light consistency. If run lengths are
extended beyond the recommended lengths noted above, there will be inconsistent light output and voltage drop.
www.contechlighting.com1-847-559-5500 All specifications subject to change without notice.RecyclePlease
Example Order: TLT12V33K12R
Input Voltage
12V - 12V DC
Output
3 - Super High Output
Tapelight Series
TLT
Length / Quantity
4 - 4" Individual Segment4R - 20' Reel of 4" Segments (60 pieces total)12 - 12" Individual Segment12R - 20' Reel of 12" Segments (20 pieces total)16CR - 16' Continuous Reel
Color Temperature
22K - 2200K B - Blue*27K - 2700K G - Green*3K - 3000K R - Red*35K - 3500K Y - Yellow*4K - 4000K 6K - 6500K
Catalog No.
Type
Project
*Not available in Continuous Reel
Ordering information
TLT Tapelight Series12VDC Damp Location Super High Output Flexible Tapelight
Photometrics
Light Output (Fixture Lumens): 442Total Watts@120V: 6.4Lumens Per Watt: 69.1Color Rendering Index (CRI)¹: 80Color Temperature (CCT)²: 3042KSpectral Power Distribution Chart³
Designed for 50,000 Hour Lamp Life1; LM Test No. 87096TLT12V33K12
Candlepower Summary FROM 0 CANDELA LUMENS 0 158 5 157 15 15 154 43 25 146 67 35 133 82 45 116 88 55 93 81 65 17 48 75 7 16 85 1 3 95 0 0 Beam Distribution: 116°
Spacing Criteria: 1.3
0 90°
15°0° 30°
45°120
60
180
75°
60°
Candela Curve
Wavelength (nm)380 410 440 470 500 530 560 590 620 650 680 710 740 770
10
5
0
*Dependent on surrounding temperatures
1. Accuracy of rendering colors2. Color appearance of light source3. Colors present within the light source
Tape mounted in vertical base-up position
Tapelight SeriesPower Supplies
12V Plug-In Power Supplies
Catalog No.
Type
Project
www.contechlighting.com REV03201-847-559-5500 All specifications subject to change without notice.RecyclePlease
12V Hardwire Power Supplies
12V/24W Plug-and-Play Power Supply120VAC/12VDC. Includes AC wall plug and female power output plug for easy installation. For use with 12V LED Tapelight.3-1/4" L x 1-3/4" W x 1-1/4" D; system length: 6'TLP12VP24
12V Plug-and-Play Power Supply120VAC/12VDC. Includes AC wall plug and female power output plug for easy installation. For use with 12V LED Tapelight. 4" L x 2" W x 1-1/4" DTLP12VP36 - 36W, System Length 10’ TLP12VP60 - 60W, System Length 12’
12V Hardwire Class 2 Enclosed Driver12VDC. Dimmable Class 2 listed driver. Compact self-en-closed driver with two (2) knockouts. Auto Reset and short circuit protection. Dimmable with standard MLV/In-candescent TRIAC (leading edge) dimmers; 8W min. load required for smooth dimming. For use with 12V LED Tapelight, not to be used with RGB tapelight series.TLP12VHW20-ENC - 120V/20W;
6-3/4" L x 2-5/8" W x 1-1/4" DTLP12VHW60-ENC - 120V/60W;
6-3/4" L x 2-5/8" W x 1-1/4" D
12V Hardwire Class 2 Constant Voltage Driver120 - 277VAC/12VDC Dimming and non-dimming Class 2 Constant Voltage LED Drivers. UL Listed enclosure with built-in junction boxes. No minimum load requirement. Auto-reset protection for short circuit and over-temperature. Over load protection in CC mode. 0-10V Dimming driver delivers smooth flicker free linear dimming down to 1% with most LEDs and a wide variety of compatible dimmers. Suitable for both indoor and outdoor installations. For use with 12V LED Tapelight.TLP12VHW50MV-ENC - 50W 12V 120-277VAC,
Non-Dimming DriverTLP12VHW50MVD2-ENC - 50W 12V 120-277VAC,
0-10V Dimming Driver
12V Hardwire Power Supply12VDC. Includes stripped and tinned wire pigtails on the input and output sides. MUST BE MAINTAINED WITHIN AN ENCLOSURE THAT MEETS LOCAL BUILDING CODES AND NEC (SUPPLIED BY OTHERS). 2' Wire leads. Class 2 recognized. For use with 12V LED Tapelight.TLP12VHW20 - 120V/20W;
4-3/4" L x 1-3/16" W x 1" DTLP12VHW60 - 120V/60W;
6-1/2" L x 1-3/4" W x 1-1/4" D
Continued
12V Outdoor Power Supplies
Wet Rated 36W Plug-and-Play Power Supply120VAC/12VDC. Includes AC wall plug and female power output plug for easy installation. 7-1/8" L x 2" W x 1-5/8" D; cord length: 6.5'.TLPO12VP36
Wet Rated 60W Plug-and-Play Power Supply120VAC/12VDC. Includes AC wall plug and female power output plug for easy installation.7-1/8" L x 2" W x 1-5/8" D; cord length: 6.5'.TLPO12VP60
24V Hardwire Class 2 Enclosed Driver24VDC. Dimmable Class 2 listed driver. Compact self-en-closed driver with two (2) knockouts. Auto Reset and short circuit protection. Dimmable with standard MLV/In-candescent TRIAC (Leading Edge) dimmers; 8W Min. load required for smooth dimming. For use with 24V LED Tapelight.TLP24VHW20-ENC - 120V/20W; 6-3/4" L x 2-2/3" W x 1-1/4" DTLP24VHW60-ENC - 120V/60W; 6-3/4" L x 2-2/3" W x 1-1/4" DTLP24VHW96-ENC - 120V/96W; 6-3/4" L x 2-2/3" W x 1-1/4" DTLP24VHW96-ENC277V - 277V/96W; 10" L x 3" W x 3" D
Tapelight SeriesPower Supplies
24V Plug-and-Play Power Supply120VAC/24VDC. Includes AC wall plug and female power output barrel plug for easy installation. For use with 24V LED Tapelight, Class 2 listed.TLP24VP36 - 36W; 4-1/4"L x 2"W x 1-3/8"HTLP24VP60 - 60W; 4-1/2"L x 2"W x 1-3/8"HTLP24VP96 - 96W; 6-1/8"L x 2-3/8"W x 1-1/2"H
24V Plug-In Power Supplies
Catalog No.
Type
Project
www.contechlighting.com1-847-559-5500 All specifications subject to change without notice.RecyclePlease
24V Hardwire Power Supplies
24V Hardwire Power Supply24VDC. Includes stripped and tinned wire pigtails on the input and output sides. MUST BE MAINTAINED WITHIN AN ENCLOSURE THAT MEETS LOCAL BUILDING CODES AND NEC (SUPPLIED BY OTHERS). 1' Wire leads. Class 2 recognized. For use with 24V LED Tapelight.TLP24VHW20 - 120V/20W; 5-3/4"L x 1-1/2"W x 1-1/4"DTLP24VHW60 - 120V/60W; 6-1/3" L x 1-3/4" W x 1-1/4" DTLP24VHW96 - 120V/96W; 8-3/4" L x 2-2/3" W x 1-1/2" D
24V Hardwire Class 2 Constant Voltage Driver120 - 277VAC/24VDC Dimming and non-dimming Class 2 Constant Voltage LED Drivers. UL Listed enclosure with built-in junction boxes. No minimum load requirement. Auto-reset protection for short circuit and over-tempera-ture. Over load protection in CC mode. 0-10V Dimming driver delivers smooth flicker free linear dimming down to 1% with most LEDs and a wide variety of compatible dimmers. Suitable for both indoor and outdoor installa-tions. For use with 24V LED Tapelight.TLP24VHW60MV-ENC - 60W 24V 120-277VAC, Non-Dimming DriverTLP24VHW60MVD2-ENC - 60W 24V 120-277VAC, 0-10V Dimming DriverTLP24VHW96MV-ENC - 96W 24V 120-277VAC, Non-Dimming DriverTLP24VHW96MVD2-ENC - 96W 24V 120-277VAC, 0-10V Dimming Driver
24V Hi-Lume Premier DriverEnclosed Class 2 96W Constant Voltage Driver with dimming down to 0.1% with compatible controls. Universal 120-277VAC input. Output wattage range 25-96W. For use with 24V LED Tapelight.L3D0-96W24V-U - 120-277V/96W 5.5" W x 2" H x 10.5" L
Tapelight SeriesPower Supply Accessories
12V/24V Plug-and-Play Power Supply ExtensionIncludes male and female plug connectors. For use with 12V or 24V LED Tapelight, not compatible with RGBW tapelight series.TLCEXT24 - 24" TLCEXT48 - 48" TLCEXT36 - 36" TLCEXT96 - 96"
12V/24V Plug-and-Play 2-Way SplitterIncludes (1) male and (2) female connectors. Approxi-mately 2' long. For use with 12V or 24V LED Tapelight, not compatible with RGBW tapelight series.TLCS2
12V/24V Plug-and-Play 3-Way SplitterIncludes (1) male plug connector and (3) female plug connectors. Approximately 2' long. For use with 12V or 24V LED Tapelight, not compatible with RGBW tapelight series.TLCS3
12V/24V Static Color Male Power ConnectorIncludes (1) male plug connector and (1) male flex tape connector. For use with 12V or 24V static color LED Tapelight.TLCIP12 - 12" TLCIP19 - 19"
12V/24V Static Color Female Power Connector12" Connector includes (1) male plug connector and (1) female flex tape connector. For use with 12V or 24V static color LED Tapelight.TLCOP12
Plug-In Power Connectors
Catalog No.
Type
Project
www.contechlighting.com REV12191-847-559-5500 All specifications subject to change without notice.RecyclePlease
Hardwire Power Connectors
Outdoor Power Connectors
12V/24V Hardwire Female Connector6" Connector includes a wire pigtail end and a female plug connector on the other end. Used to add plug and play female connector to hardwire power supplies. For use with 12V or 24V LED Tapelight.TLCCF
12V/24V Hardwire Male Connector6" Connector includes a wire pigtail end and a male plug connector on the other end. Used for easy plug in con-nection to plug and play power supply and wire end can be connected to RGB controller at the screw terminals. For use with 12V or 24V LED Tapelight.TLCCM
12V/24V Hardwire Male Power ConnectorIncludes wire pigtail end and (1) male flex tape connec-tor. For use with 12V or 24V LED Tapelight.TLCIP12HW - 12" TLCIP19HW - 19"
12V/24V Hardwire Female Power Connector12" Connector includes wire pigtail end and (1) female flex tape connector. For use with 12V or 24V LED Tapelight.TLCOP12HW
RGB Hardwire Male Power ConnectorIncludes wire pigtail end and (1) male flex tape con-nector. Use with RGB Controller, LED Power Repeater and 0-10V Dimming Module. For use with RGB LED Tapelight.TLCIP12HWRGB - 12"
RGB Hardwire Female Power ConnectorIncludes wire pigtail end and (1) female flex tape connec-tor. Use with RGB Controller, LED Power Reapeater and 0-10V Dimming Module. For use with RGB LED Tapelight.TLC0P12HWRGB - 12"
RGBW Hardwire Male Power ConnectorIncludes wire pigtail end and (1) male flex tape con-nector. Use with RGBW Controller, LED Power Repeater and 0-10V Dimming Module. For use with 24V RGBW LED Tapelight.TLCIP12HWRGBW - 12"
RGBW Hardwire Female Power ConnectorIncludes wire pigtail end and (1) female flex tape connec-tor. Use with RGBW Controller, LED Power Reapeater and 0-10V Dimming Module. For use with 24V RGBW LED Tapelight.TLC0P12HWRGBW - 12"
Tunable White Hardwire Male Power ConnectorIncludes wire pigtail end and (1) male flex tape con-nector. Use with TW Controller and LED Power Repeater. For use with 24V TW LED Tapelight.TLCIP12HWTW - 12"
Tunable White Hardwire Female Power ConnectorIncludes wire pigtail end and (1) female flex tape connec-tor. Use with TW Controller and LED Power Reapeater. For use with 24V LED TW Tapelight.TLC0P12HWTW - 12"
Wet Rated Plug-and-Play 2-Way SplitterIncludes (1) male and (2) female connectors. Approximately 22" long. For use with 12V Outdoor Tapelight.TLCOS2
Wet Rated Plug-and-Play ExtensionDC Power inpput cord extension. Includes (1) male and (1) female connector. Approximately 72" long. For use with 12V Outdoor Tapelight.TLCOEXT72
Catalog No.
Type
Project
www.contechlighting.com REV12191-847-559-5500 All specifications subject to change without notice.RecyclePlease
12V/24V Bridge ConnectorBlank section used to bridge gaps where LEDs are not necessary. For use with 12V or 24V LED Tapelight.TLCM2 - 2" TLCM6 - 6" TLCM12 - 12"
12V/24V Cross ConnectorUsed to connect up to four (4) TLT segments. May be cut to create 2-way “L” connection or 3-way “T” connec-tion. For use with 12V or 24V LED Tapelight.TLCX
12V/24V Short Female-to-Female ConnectorUsed to connect male to female connectors. For use with 12V or 24V LED Tapelight.TLCFF
Tapelight SeriesTapelight Linear Controllers
RGBW Cross ConnectorCan connect up to four (4) TLT RGBW segments. May be cut to create 2-way “L” connection or 3-way “T” connec-tion. For use with 24V RGBW LED Tapelight.TLCXRGBW
RGBW Bridge ConnectorBlank section used to bridge gaps where LEDs are not necessary. Field cuttable every inch, only on 6” and 12” lengths. For use with 24V RGBW LED Tapelight.TLCM2RGBW - 2" TLCM6RGBW - 6" TLCM12RGBW - 12"
RGB & Tunable White Cross ConnectorCan connect up to four (4) tapelight segments. May be cut to create 2-way “L” connection or 3-way “T” connec-tion. For use with RGB and Tunable White Tapelight.TLCXRGB
RGB & Tunable White Bridge ConnectorBlank section used to bridge gaps where LEDs are not necessary. For use with RGB and Tunable White Tapelight. TLCM2RGB - 2" TLCM6RGB - 6" TLCM12RGB - 12"
RGB & Tunable WhiteShort Female-to-Female ConnectorUsed to connect male tapelight ends. For use with RGB and Tunable White Tapelight.TLCFFRGB
RGBW Short Female-to-Female ConnectorUsed to connect male tapelight ends. For use with 24V RGBW Tapelight.TLCFFRGBW
Catalog No.
Type
Project
www.contechlighting.com REV12191-847-559-5500 All specifications subject to change without notice.RecyclePlease
12V/24V LED 4-Channel Power RepeaterEnables synchronized control of multiple runs from one controller. For use with Static Color, TW, RGB, or RGBW LED Tapelight.5-5/16" L x 1-3/4" W x 1-1/8" DTLPRTW
RGB/RGBW Touch ControllerDial Touch Controller, select color by color wheel. Speed and brightness control. Pre-selected modes. For use with 12V RGB or 24V RGBW LED Tapelight. 20AMP Max.6-7/8" L x 1-3/4" W x 1-3/16" DTLPRGBWTC
RGB/RGBW 28-Key Remote Controller28-Key RF Remote for color, speed, and brightness control. Seven (7) programmable scenes. For use with 12V RGB or 24V RGBW LED Tapelight. 20AMP Max.6-7/8" L x 1-3/4" W x 1-3/16" DTLPRGBWRF
Switch, LED Tapelight IR Wireless WavingAllows wireless on/off switching functionality by waving an object within the IR field. For use with 12V or 24V LED Tapelight. 36W Max. 1-1/2" L x 1-3/16" W x 5/16" HTLPIWV
12V/24V DMX 512 CV DecoderDesigned to convert universal DMX 512 signal to PWM signal when used with a DMX 512 console (by others). Can control white, single color or RGB LEDs. For use with 12V or 24V LED Tapelight. Not UL listed for outdoor use.6-3/16" L x 3-1/8" W x 1-5/8" DTLPINT
Switch, LED Tapelight IR CabinetAllows on/off switching functionality for use with cabinet doors. For use with 12V or 24V LED Tapelight. 36W Max. 1-1/2" L x 1-3/16" W x 5/16" HTLPICB
Tapelight SeriesTapelight Controllers
12V/24V LED 3-Channel Power RepeaterEnables synchronized control of multiple runs from one controller. For use with Static Color, TW, or RGB LED Tapelight.4-3/4" L x 1-1/2" W x 1-1/2" DTLPRPT
Tunable White Touch ControllerDial Touch Controller, select color temperature by color circle. Speed and brightness control. Receiver power input 12-24VDC; Max current load 9A. 3Ax3 Channels; Max output power 108W (12V)/216W (24V). 5-5/16" L x 1-3/16" W x 7/8" HRemote frequency: 433.92mHzRemote dimensions: 4-1/8" L x 2-1/4" W x 3/8" H TLPTWMTC
Tunable White Premium ControllerPremium RF remote, push button control for color temperature, speed and brightness, pre-programmed scenes and two (2) programmable scenes. Receiver power input, 12-24VDC; Max current load, 12A, 3Ax4 Channels; Max output power, 144W (12V)/288W (24V). 5" L x 1-3/8" W x 7/8" HRemote frequency: 2.4GHzRemote dimensions: 5-3/4" L x 1-5/8" W x 1/2" HTLPTWV2RF
Dimmer, LED Tapelight TouchAllows adjustment of the brightness of the LEDs by touching the controller housing. 36W Max. For use with 12V or 24V LED Tapelight; not compatible with RGB tapelight. 1-1/2" L x 1-3/16" W x 5/16" HTLPIDM
12V/24V Dimming Controller with RF Remote ControlPre-programmed functions include: color strobe, 3-chan-nel color change and gradual brightness change. Includes two (2) programmable presets. Not rated for outdoor use.8-3/8" L x 1-5/8" W x 1-3/16" DTLPRGBRF
12V/24V Static Color 0-10V Dimming ModuleFor use with standard 0-10V dimmers. Dimming down to 15%. For use with 12V or 24V Static Color LED Tapelight. Not UL listed for outdoor use. Not compatible with TW, RGB, or RGBW tapelight series.4-3/4" L x 1-1/2" W x 1-1/2" DTLPDIM10V
Replacement RGB Outdoor Remote ControlIncluded with RGB Tapelight Kit; control for RGB outdoor tapelight. 3-1/4" L x 2" W x 1/4" DTLPORGBRMT
IR Controllers
Wall Plate DimmerAllows adjustment of the brightness of the LEDs using the knob adjustment or the IR remote control. Dimming down to 1%. For use with 12V or 24V Static Color LED Tapelight, not compatible with RGB tapelight series. Discontinued item; consult factory for availability. 3-7/16" square x 2-1/4" deep.TLPDIMWP
TLACDC4 - Double Wide Channel Mounting
TLACDCA4 - Double Wide Channel, Angled Mounting
Aluminum Mounting Channel*Provides excellent heat sinking and protection to the LEDs while ensuring a clean, straight run.
TLACSC4 - Standard Channel Mounting
TLACSCA4 - Standard Channel, Angled Mounting
Channel Mounting ClipsFour (4) Mounting clips and four (4) Philips head screws per package. 24" Between clips recom-mended for most applications. Stainless Steel.
Catalog No.
Type
Project
5/16"
3/8"
11/16"
1-1/8"3/8"
13/16"
5/16"
3/8" 3/8"
1-1/8"
TLACSC4
TLACDC4
TLACDCA4
TLACSCA4
3/4" 1/2"
5/16"
13/16" 13/16"
3/8"
1-3/16"
1/2"
5/16"
TLACSC4
TLACSCA4
3/4" 1/2"
5/16"
1"
1"
5/8"
1"
3/8"
11/16"
TL Tapelight SeriesMounting Accessories
TLACSE2 - Standard Channel End Caps, Grey
TLACSE2-B - Standard Channel End Caps, Black
Channel End CapsCreates a clean finish to the mounting channel. Set of two (2) end caps; one open, one closed. ABS Plastic.
*Outdoor/Wet listed Tapelight is not compatible with channel end caps or diffusion lenses, except when using the Deep Standard Channel.
www.contechlighting.com REV03191-847-559-5500 RecyclePlease All specifications subject to change without notice.
TLACS6 - 6' Standard Channel, Aluminum
TLACS6-B - 6' Standard Channel, Black
TLACSC4 - Standard Channel Mounting
TLACSCA4 - Standard Channel, Angled Mounting
TLAC8TE2 - Deep Channel End Caps, Grey
TLAC8TE2-B - Deep Channel End Caps, Black
TLAC8T6 - 6' Deep Standard Channel, Aluminum
TLAC8T6-B - 6' Deep Standard Channel, Black
TLACDE2 - Double Wide Channel End Caps, Grey
TLACDE2-B - Double Wide Channel End Caps, Black
TLACD6 - 6' Double Wide Channel, Aluminum
TLACD6-B - 6' Double Wide Channel, Black
TLACAC4 - Angled Channel Mounting
TLACAE2 - Angled Channel End Caps, Grey
TLACAE2-B - Angled Channel End Caps, Black
TLACA6 - 6' 45° Angled Channel, Aluminum
TLACA6-B - 6' 45° Angled Channel, Black
11/16"
11/16"
5/8"
11/16"
11/16"
5/8"
TLACRC4 - Recessed Channel Mounting
Aluminum Mounting Channel*Provides excellent heat sinking and protection to the LEDs while ensuring a clean, straight run.
TLACOC4 - Round Channel Mounting
Catalog No.
Type
Project
3/8"
5/16"1/4"
1"
5/8"
3/8"
35°
1"
13/16"11/16"
3/8"
1/2" 3/4"
7/8"
1-3/4"
3/4"
3/8"
3/8"
7/8"
3/8"
7/8"1/2"
1/8"
TL Tapelight SeriesMounting Accessories
TLACOE2 - Round Channel End Caps, Grey
TLACOE2-B - Round Channel End Caps, Black
*Outdoor/Wet listed Tapelight is not compatible with channel end caps or diffusion lenses, except when using the Deep Standard Channel.
www.contechlighting.com1-847-559-5500 RecyclePlease All specifications subject to change without notice.
TLACO6 - 6' Round Channel, Aluminum
TLACO6-B - 6' Round Channel, Black
TLACTC4 - Wall Mount “T” Channel Mounting Clip Set
TLACTE2 - Wall Mount “T” End Caps, Grey
TLACTE2-B - Wall Mount “T” End Caps, Black
TLACTE2-P - Wall Mount “T” End Caps, White
TLACT6 - 6' Wall Mount “T” Channel, Aluminum
TLACT6-B - 6' Wall Mount “T” Channel, Black
TLACT6-P - 6' Wall Mount “T” Channel, White
TLACRE2 - Recessed Channel End Caps, Grey
TLACRE2-B - Recessed Channel End Caps, Black
TLACR6 - 6' Recessed Channel, Aluminum
TLACR6-B - 6' Recessed Channel, Black
Channel Mounting ClipsFour (4) Mounting clips and four (4) Philips head screws per package. 24" Between clips recom-mended for most applications. Stainless Steel.
Channel End CapsCreates a clean finish to the mounting channel. Set of two (2) end caps; one open, one closed. ABS Plastic.
Aluminum Mounting Channel*Provides excellent heat sinking and protection to the LEDs while ensuring a clean, straight run.
No mounting clips are availalble for the Ceiling Edge Mount Mounting Channel.
Mount the channel by drilling holes through channel and mounting surface and screwing into place.
No mounting clips are availalble for the Toe Kick Mounting Channel.
Mount the channel by using construction adhesive or 3M™ VHB™ tape.
No end caps are availalble for the Ceiling Edge Mount Mounting Channel.
Catalog No.
Type
Project
3/8"
1-1/4"
1-1/4"
9/16"
3/8"
2/3"
3-1/2"
TL Tapelight SeriesMounting Accessories
TLACKE2 - Toe Kick End Caps, Grey
TLACKE2-B - Toe Kick End Caps, Black
TLACKE2-P - Toe Kick End Caps, White
*Outdoor/Wet listed Tapelight is not compatible with channel end caps or diffusion lenses, except when using the Deep Standard Channel.
www.contechlighting.com1-847-559-5500 RecyclePlease All specifications subject to change without notice.
TLACE6 - 6' Ceiling Edge Mount Channel, Aluminum
TLACE6-B - 6' Ceiling Edge Mount Channel, Black
TLACE6-P - 6' Ceiling Edge Mount Channel, White
TLACK6 - 6' Toe Kick Channel, Aluminum
TLACK6-B - 6' Toe Kick Channel, Black
TLACK6-P - 6' Toe Kick Channel, White
Wet Listed Tapelight Silicone SealantIncluded with wet listed Tapelight kit. For securing end caps to end of tapelight to create a water-tight seal.TLAOSG
Wet Listed Tapelight End CapsIncluded with wet listed Tapelight kit. Use with silicone sealant to create a water tight seal after tape is cut. Set of two (2) end caps.TLAOEC2
Wet Listed Tapelight Mounting ClipsIncluded with wet listed Tapelight kit. Four (4) mounting clips and eight (8) Philips head screws per package. 24" Between clips is recommended for most applications.TLAOMC4
Acrylic Diffusion LensFor use with mounting channel. Provides extra protection for the LEDs as well as diffusion to reduce glare. 6' L. Wet listed Tapelight is not compatible with channel end caps or diffusion lenses.TLALC6 - Clear Lens TLALF6 - Frosted LensTLALCD6 - Double Wide Clear LensTLALFD6 - Double Wide Frosted Lens
Channel Mounting ClipsFour (4) Mounting clips and four (4) Philips head screws per package. 24" Between clips recom-mended for most applications. Stainless Steel.
Channel End CapsCreates a clean finish to the mounting channel. Set of two (2) end caps; one open, one closed. ABS Plastic.
1/4" 1/4"
9/16" 1"
TLAL_6
TLAL_D6