Catalog Reception technology 2018
Perfect technology
for highest demands
Regoort.nl
http://www.wisi.de/
Table of Contents
Multiswitch FLEXSWITCH Multiswitch PROSWITCH
Multiswitch 13 inputs,
cascade
DRC 1308 ............................. 26
DRC 1312 ............................. 27
DRC 1316 ............................. 28
DRC 1324 ............................. 29
DRC 1332 ............................. 30
Multiswitch 17 inputs,
cascade
DRC 1708 ............................. 31
DRC 1712 ............................. 32
DRC 1716 ............................. 33
DRC 1724 ............................. 34
DRC 1732 ............................. 35
Multiswitch 5 inputs, cascade
DRC 0508 ............................... 8
DRC 0512 ............................... 9
DRC 0516 ............................. 10
DRC 0524 ............................. 11
DRC 0532 ............................. 12
Multiswitch 5 inputs, receiver
powered
DRR 0508 ............................. 13
DRR 0516 ............................. 14
Multiswitch 5 inputs, stand
alone
DRS 0516.............................. 15
DRS 0508.............................. 16
DRS 0512.............................. 17
DRS 0524.............................. 18
DRS 0532.............................. 19
Multiswitch 9 inputs, cascade
DRC 0908 ............................. 20
DRC 0912 ............................. 21
DRC 0916 ............................. 22
DRC 0924 ............................. 23
DRC 0932 ............................. 24
Multiswitch 9 inputs, receiver
powered
DRR 0908 ............................. 25
Amplifiers
DRA 0505 .............................. 36
DRA 0909 .............................. 37
DRA 1313 .............................. 38
DRA 1717 .............................. 39
DRA 4132 .............................. 40
DRA 4232 .............................. 41
DRA 8132 .............................. 42
DRA 8232 .............................. 43
Taps/splitter
DRX 5002 .............................. 44
DRX 9002 .............................. 45
Accessories
DRI 0210 ............................... 46
DRP 1533 .............................. 46
Multiswitch 17 inputs,
cascade
DY 1708 ................................ 52
DY 1716 ................................ 53
Multiswitch 5 inputs, cascade
DY 0508 ................................ 48
DY 0516 ................................ 49
Multiswitch 9 inputs, cascade
DY 0908 ................................ 50
DY 0916 ................................ 51
Amplifiers
DY 40 .................................... 54
Accessories
DY 70 .................................... 55
Satellite Receiving
Systems Terrestrial antennas
Parabol offset antennas
OA 10 .................................... 56
OA 10 A .............................. 56
OA 100 G .............................. 57
OA 100 H .............................. 57
OA 100 I ................................ 57
OA 13 A .............................. 58
OA 36 G ................................ 59
OA 36 H ................................ 59
OA 36 I .................................. 59
OA 38 G ................................ 60
OA 38 H ................................ 60
OA 38 I .................................. 60
OA 85 G ................................ 61
OA 85 H ................................ 61
OA 85 I .................................. 61
Feed systems
OC 01 D ................................ 62
OC 02 D ................................ 62
OC 04 D ................................ 62
OC 06 D ................................ 62
Surge protector
DL 400 .................................. 63
Accessories Parabol offset
antennas
OF 85 0002 ......................... 64
OF 85 0004 ......................... 64
UHF antennas
EB 22 0297 ............................ 68
EB 45 LTE .................................... 68
EB 67 LTE .................................... 68
EE 06 0297 ............................ 69
EZ 45 LTE .................................... 69
FM antennas
UA 05 .................................... 70
UE 01 ..................................... 70
VHF-UHF combination
antennas
EA 34 ..................................... 71
Content in alphabetical order
D DRC 1308 ............................. 26
DRC 1312 ............................. 27
DRC 1316 ............................. 28
DRC 1324 ............................. 29
DRC 1332 ............................. 30
DRC 1708 ............................. 31
DRC 1712 ............................. 32
DRC 1716 ............................. 33
DRC 1724 ............................. 34
DRC 1732 ............................. 35
DRC 0508 ............................... 8
DRC 0512 ............................... 9
DRC 0516 ............................. 10
DRC 0524 ............................. 11
DRC 0532 ............................. 12
DRR 0508 ............................. 13
DRR 0516 ............................. 14
DRS 0516.............................. 15
DRS 0508.............................. 16
DRS 0512.............................. 17
DRS 0524.............................. 18
DRS 0532.............................. 19
DRC 0908 ............................. 20
DRC 0912 ............................. 21
DRC 0916 ............................. 22
DRC 0924 ............................. 23
DRC 0932 ............................. 24
DRR 0908 ............................. 25
DRA 0505.............................. 36
DRA 0909.............................. 37
DRA 1313.............................. 38
DRA 1717.............................. 39
DRA 4132.............................. 40
DRA 4232.............................. 41
DRA 8132.............................. 42
DRA 8232.............................. 43
DRX 5002.............................. 44
DRX 9002.............................. 45
DRI 0210 ............................... 46
DRP 1533.............................. 46
DY 1708 ................................ 52
DY 1716 ................................ 53
DY 0508 ................................ 48
DY 0516 ................................ 49
DY 0908 ................................ 50
DY 0916 ................................ 51
DY 40 .................................... 54
DY 70 .................................... 55
DL 400 .................................. 63
E EB 22 0297 ........................... 68
EB 45 LTE ................................... 68
EB 67 LTE ................................... 68
EE 06 0297 ........................... 69
EZ 45 LTE ................................... 69
EA 34 .................................... 71
O OA 10 .................................... 56
OA 10 A ............................... 56
OA 100 G .............................. 57
OA 100 H .............................. 57
OA 100 I ................................ 57
OA 13 A ............................... 58
OA 36 G ................................ 59
OA 36 H ................................ 59
OA 36 I .................................. 59
OA 38 G ................................ 60
OA 38 H ................................ 60
OA 38 I .................................. 60
OA 85 G ................................ 61
OA 85 H ................................ 61
OA 85 I .................................. 61
OC 01 D ................................ 62
OC 02 D ................................ 62
OC 04 D ................................ 62
OC 06 D ................................ 62
OF 85 0002 .......................... 64
OF 85 0004 .......................... 64
U UA 05 .................................... 70
UE 01 .................................... 70
4
5
WISI antennas:
Perfect reception at every weather
Corrosion-resistant
aluminum reflector,
powder-coated
Feed holder made of die cast aluminum
for a discreet installation available in three colours
Reinforced back panel
for more stability
easy mounting
of the reflector thru suspension unit
Cable management
for aesthetic assembly
Satellite
Receiving Systems
Communication defines our everyday life, informs us,
imparts knowledge and experience. It supports our
understanding and helps us solving problems.
WISI‘s highly-motivated staff is fully committed to provide you with the state- of-the-art technology for communication today and tomorrow.
upgradeable with optional multifeed
bar for up to 4 LNBs
WISI TOPLINE antennas are rustproof and completely weatherproof. Due to the excellent material and precise manufacturing, the antennas do not warp even with extreme temperature fluctuations. This guarantees a top picture quality in almost all weather conditions.
Of course WISI TOPLINE antennas are extremely easy to install, highly resilient, durable, recyclable and designed for modern technologies. So simply the best that WISI have to offer in antenna technology.
WISI feed systems can be used with all antennas that have a 40 mm feed mount. They are easy to adjust and also suitable with Duo Feed mounts for the reception of ASTRA and EUTELSAT.
WISI feed systems are characterized by a high linear performance over the complete frequency range. They have a low-noise and are energy-saving. Each WISI feed system gets an final inspcetion in the laboratory - for a long untroubled reception.
The special construction and tie-down weather protection cap provide protection against all weather conditions, even after many years.
Multiswitch 5 inputs, cascade
DRC 0508 FLEXSWITCH multiswitch 5 in 8, cascade, TERR. active
The DRC 0508 is a cascadable multiswitch with five inputs for the
distribution of one satellite and terrestrial signals. The polarisa-
tions are available at five cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the eight
subscriber outputs. Inserted terrestrial signals like DVB-T/T2,
DAB or FM are available at each subscriber output as well. The
very low insertion loss of the DRC 0508 is realised through an
active terrestrial and satellite path. The LNB can be powered by
previously installed amplifiers, or the available power supply DRP
1533.
Technical data
SAT-IF trunk
Inputs SAT 4 pcs.
Outputs SAT 4 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 1...2 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Technical data
Power consumption max. 10 dB
Subscriber outputs
Outputs 8 pcs.
Frequency range 40…2400 MHz
TERR type active
Insertion loss SAT 3...0 dB
Insertion TERR 0 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 84 dBµV
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz
◼ Cascadable multiswitch for the distribution of 4 satellite polarisa-
tions and terrestrial signals
◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without
an additional amplifier
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
35 mA
F-socket 18 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
8 Multiswitch FLEXSWITCH
General data
Connectors
Multiswitch 5 inputs, cascade
DRC 0512 FLEXSWITCH multiswitch 5 in 12, cascade, TERR. active
Technical data
SAT-IF trunk
Inputs SAT 4 pcs.
Outputs SAT 4 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 2...4 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
The DRC 0512 is a cascadable multiswitch with five inputs for the
distribution of one satellite and terrestrial signals. The polarisa-
tions are available at five cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 12
subscriber outputs. Inserted terrestrial signals like DVB-T/T2,
DAB or FM are available at each subscriber output as well. The
very low insertion loss of the DRC 0512 is realised through an
active terrestrial and satellite path. The LNB can be powered by
previously installed amplifiers, or the available power supply DRP
1533.
Technical data
Power consumption max. 10 dB
Subscriber outputs
Outputs 12 pcs.
Frequency range 40…2400 MHz
TERR type active
Insertion loss SAT 4...1 dB
Insertion TERR 0 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 84 dBµV
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz
◼ Cascadable multiswitch for the distribution of 4 satellite polarisa-
tions and terrestrial signals
◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without
an additional amplifier
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
35 mA
F-socket 22 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
Multiswitch FLEXSWITCH 9
General data
Connectors
Multiswitch 5 inputs, cascade
DRC 0516 FLEXSWITCH multiswitch 5 in 16, cascade, TERR. active
Technical data
SAT-IF trunk
Inputs SAT 4 pcs.
Outputs SAT 4 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 2...4 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
The DRC 0516 is a cascadable multiswitch with five inputs for the
distribution of one satellite and terrestrial signals. The polarisa-
tions are available at five cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 16
subscriber outputs. Inserted terrestrial signals like DVB-T/T2,
DAB or FM are available at each subscriber output as well. The
very low insertion loss of the DRC 0516 is realised through an
active terrestrial and satellite path. The LNB can be powered by
previously installed amplifiers, or the available power supply DRP
1533.
Technical data
Power consumption max. 10 dB
Subscriber outputs
Outputs 16 pcs.
Frequency range 40…2400 MHz
TERR type active
Insertion loss SAT 4...1 dB
Insertion TERR 0 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 84 dBµV
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz
◼ Cascadable multiswitch for the distribution of 4 satellite polarisa-
tions and terrestrial signals
◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without
an additional amplifier
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
35 mA
F-socket 26 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
10 Multiswitch FLEXSWITCH
General data
Connectors
Multiswitch 5 inputs, cascade
DRC 0524 FLEXSWITCH multiswitch 5 in 24, cascade, TERR. active
The DRC 0524 is a cascadable multiswitch with five inputs for the
distribution of one satellite and terrestrial signals. The polarisa-
tions are available at five cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 24
subscriber outputs. Inserted terrestrial signals like DVB-T/T2,
DAB or FM are available at each subscriber output as well. The
very low insertion loss of the DRC 0524 is realised through an
active terrestrial and satellite path. The LNB can be powered by
previously installed amplifiers, or the available power supply DRP
1533.
Technical data
SAT-IF trunk
Inputs SAT 4 pcs.
Outputs SAT 4 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 2...6 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Technical data
Power consumption max. 10 dB
Subscriber outputs
Outputs 24 pcs.
Frequency range 40…2400 MHz
TERR type active
Insertion loss SAT 6...0 dB
Insertion TERR 2 dB (±2 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 91 dBµV
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz
◼ Cascadable multiswitch for the distribution of 4 satellite polarisa-
tions and terrestrial signals
◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without
an additional amplifier
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
35 mA
F-socket 34 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
Multiswitch FLEXSWITCH 11
General data
Connectors
Multiswitch 5 inputs, cascade
DRC 0532 FLEXSWITCH multiswitch 5 in 32, cascade, TERR. active
The DRC 0532 is a cascadable multiswitch with five inputs for the
distribution of one satellite and terrestrial signals. The polarisa-
tions are available at five cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 32
subscriber outputs. Inserted terrestrial signals like DVB-T/T2,
DAB or FM are available at each subscriber output as well. The
very low insertion loss of the DRC 0532 is realised through an
active terrestrial and satellite path. The LNB can be powered by
previously installed amplifiers, or the available power supply DRP
1533.
Technical data
SAT-IF trunk
Inputs SAT 4 pcs.
Outputs SAT 4 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 2...6 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Technical data
Power consumption max. 10 dB
Subscriber outputs
Outputs 32 pcs.
Frequency range 40…2400 MHz
TERR type active
Insertion loss SAT 6...0 dB
Insertion TERR 2 dB (±2 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 91 dBµV
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz
◼ Cascadable multiswitch for the distribution of 4 satellite polarisa-
tions and terrestrial signals
◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without
an additional amplifier
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
35 mA
F-socket 42 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
12 Multiswitch FLEXSWITCH
General data
Connectors
Multiswitch 5 inputs, receiver powered
Technical data
DRR 0508 FLEXSWITCH multiswitch, receiver power, 5 in 8
The DRR 0508 is a receiver powered multiswitch with five inputs
for the distribution of one satellite and terrestrial signals. Com-
mercially available DVB-S/S2 set-top-boxes or TVs with an integra-
ted receiver can be used at the eight subscriber outputs. Inserted
terrestrial signals like DVB-T/T2, DAB or FM are available at each
subscriber output as well. The very low insertion loss of the DRR
0508 is realised through an active satellite path. Through the
passive terrestrial path, it is possible to feed in multimedia services
like “LAN over Coax” or signals from a headend system. The LNB
is powered by the switching voltage of the connected receivers
and an additional power supply is not required, which reduces
the operating costs.
Weight 0.24 kg
Inputs SAT 4 pcs.
Frequency range SAT 950... 2400 MHz
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Terrestrial trunk
Dimensions (width x height x
depth)
characteristics
130 x 110 x 45 mm
Inputs TERR 1 pcs.
Frequency range TERR 5... 862 MHz
Isolation TERR - SAT 30 dB typ.
Return loss TERR >10 dB
Subscriber outputs
Outputs 8 pcs.
Frequency range 5...2400 MHz
TERR type Passive
Insertion loss SAT 0...-5 dB
Insertion TERR 18 dB (±2 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz
◼ Receiver powered multiswitch for the distribution of 4 satellite pola-
risations and terrestrial signals
◼ Power supply-free usage
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs
◼ Made in Germany
Current consumption from
receiver
30 mA
F-socket 13 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage receiver powered
Power consumption max.
Multiswitch 5 inputs, receiver powered
DRR 0516 FLEXSWITCH multiswitch, receiver power, 5 in 16
The DRR 0516 is a receiver powered multiswitch with five inputs
for the distribution of one satellite and terrestrial signals. Com-
mercially available DVB-S/S2 set-top-boxes or TVs with an integ-
rated receiver can be used at the 16 subscriber outputs. Inserted
terrestrial signals like DVB-T/T2, DAB or FM are available at each
subscriber output as well. The very low insertion loss of the DRR
0516 is realised through an active satellite path. Through the
passive terrestrial path, it is possible to feed in multimedia services
like “LAN over Coax” or signals from a headend system. The LNB
is powered by the switching voltage of the connected receivers
and an additional power supply is not required, which reduces
the operating costs.
Weight 0.4 kg
Inputs SAT 4 pcs.
Frequency range SAT 950... 2400 MHz
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Terrestrial trunk
Dimensions (width x height x
depth)
characteristics
215 x 110 x 45 mm
Inputs TERR 1 pcs.
Frequency range TERR 5... 862 MHz
Isolation TERR - SAT 30 dB typ.
Return loss TERR >10 dB
Subscriber outputs
Outputs 16 pcs.
Frequency range 5...2400 MHz
TERR type Passive
Insertion loss SAT 1...-4 dB
Insertion TERR 24 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz
◼ Receiver powered multiswitch for the distribution of 4 satellite pola-
risations and terrestrial signals
◼ Power supply-free usage
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs
◼ Made in Germany
Current consumption from
receiver
30 mA
F-socket 21 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage receiver powered
Power consumption max.
Multiswitch 5 inputs, stand alone
DRS 0516 FLEXSWITCH multiswitch 5 in 16, stand alone
The DRS 0516 is a stand alone multiswitch with five inputs for
the distribution of one satellite and terrestrial signals. The stand
alone device is equipped with an integrated power supply which
ensures the LNB powering. Additionally integrated is a 22 KHz
generator which allows the usage of Quad-LNBs. Commercially
available DVB-S/S2 set-top-boxes or TVs with an integrated recei-
ver can be used at the 16 subscriber outputs. Inserted terrestrial
signals like DVB-T/T2, DAB or FM are available at each subscriber
output as well. The very low insertion loss of the DRS 0516 is
realised through an active terrestrial and satellite path.
Technical data
SAT-IF trunk
Inputs SAT 4 pcs.
Frequency range SAT 950... 2400 MHz
Technical data
Impedance 75
Operating temperature range 0...+55 °C
Weight 0.64 kg
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Terrestrial trunk
Inputs TERR 1 pcs.
Frequency range TERR 40... 862 MHz
Dimensions (width x height x
depth)
characteristics
310 x 110 x 57 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR >10 dB
Subscriber outputs
Outputs 16 pcs.
Frequency range 40…2400 MHz
TERR type active
Insertion loss SAT 1...-4 dB
Insertion TERR 2 dB (±2 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 84 dBµV
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz
◼ Stand alone multiswitch for the distribution of 4 satellite polarisa-
tions and terrestrial signals
◼ Quad-LNB support
◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without
an additional amplifier
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs
◼ Made in Germany
Current consumption from
receiver
30 mA
F-socket 21 pcs.
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
General data
Power indicator LED
Quad LNB support Yes
LNB supply voltage 14 V/18 V (22 kHz)
Current consumption LNB max. 500 mA
Operating voltage 90...264 V AC, 50/60 Hz
Power consumption max. 5.5 W typ.
Screening factor Class A, according to EN 50083-2
Multiswitch FLEXSWITCH 15
Connectors
Multiswitch 5 inputs, stand alone
DRS 0508 FLEXSWITCH multiswitch 5 in 8, stand alone
Technical data
SAT-IF trunk
Inputs SAT 4 pcs.
Frequency range SAT 950... 2400 MHz
The DRS 0508 is a stand alone multiswitch with five inputs for the
distribution of one satellite and terrestrial signals. The stand alone
device is equipped with an integrated power supply which ensu-
res the LNB powering. Additionally integrated is a 22 KHz genera-
tor which allows the usage of Quad-LNBs. Commercially available
DVB-S/S2 set-top-boxes or TVs with an integrated receiver can be
used at the eight subscriber outputs. Inserted terrestrial signals
like DVB-T/T2, DAB or FM are available at each subscriber output
as well. The very low insertion loss of the DRS 0508 is realised
through an active terrestrial and satellite path.
Technical data
Impedance 75
Operating temperature range 0...+55 °C
Weight 0.46 kg
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Terrestrial trunk
Inputs TERR 1 pcs.
Frequency range TERR 40... 862 MHz
Dimensions (width x height x
depth)
characteristics
222 x 110 x 57 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR >10 dB
Subscriber outputs
Outputs 8 pcs.
Frequency range 40…2400 MHz
TERR type active
Insertion loss SAT 0...-5 dB
Insertion TERR 2 dB (±2 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 90 dBµV
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz
◼ Stand alone multiswitch for the distribution of 4 satellite polarisa-
tions and terrestrial signals
◼ Quad-LNB support
◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without
an additional amplifier
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs
◼ Made in Germany
Current consumption from
receiver
30 mA
F-socket 13 pcs.
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
General data
Power indicator LED
Quad LNB support Yes
LNB supply voltage 14 V/18 V (22 kHz)
Current consumption LNB max. 500 mA
Operating voltage 90...264 V AC, 50/60 Hz
Power consumption max. 5.5 W typ.
Screening factor Class A, according to EN 50083-2
16 Multiswitch FLEXSWITCH
Connectors
Multiswitch 5 inputs, stand alone
DRS 0512 FLEXSWITCH multiswitch 5 in 12, stand alone
The DRS 0512 is a stand alone multiswitch with five inputs for
the distribution of one satellite and terrestrial signals. The stand
alone device is equipped with an integrated power supply which
ensures the LNB powering. Additionally integrated is a 22 KHz
generator which allows the usage of Quad-LNBs. Commercially
available DVB-S/S2 set-top-boxes or TVs with an integrated recei-
ver can be used at the 12 subscriber outputs. Inserted terrestrial
signals like DVB-T/T2, DAB or FM are available at each subscriber
output as well. The very low insertion loss of the DRS 0512 is
realised through an active terrestrial and satellite path.
Technical data
SAT-IF trunk
Inputs SAT 4 pcs.
Frequency range SAT 950... 2400 MHz
Technical data
Impedance 75
Operating temperature range 0...+55 °C
Weight 0.62 kg
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Terrestrial trunk
Inputs TERR 1 pcs.
Frequency range TERR 40... 862 MHz
Dimensions (width x height x
depth)
characteristics
310 x 110 x 57 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR >10 dB
Subscriber outputs
Outputs 12 pcs.
Frequency range 40…2400 MHz
TERR type active
Insertion loss SAT 1...-4 dB
Insertion TERR 2 dB (±2 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 84 dBµV
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz
◼ Stand alone multiswitch for the distribution of 4 satellite polarisa-
tions and terrestrial signals
◼ Quad-LNB support
◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without
an additional amplifier
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs
◼ Made in Germany
Current consumption from
receiver
30 mA
F-socket 17 pcs.
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
General data
Power indicator LED
Quad LNB support Yes
LNB supply voltage 14 V/18 V (22 kHz)
Current consumption LNB max. 500 mA
Operating voltage 90...264 V AC, 50/60 Hz
Power consumption max. 5.5 W typ.
Screening factor Class A, according to EN 50083-2
Multiswitch FLEXSWITCH 17
Connectors
Multiswitch 5 inputs, stand alone
DRS 0524 FLEXSWITCH multiswitch 5 in 24, stand alone
Technical data
SAT-IF trunk
Inputs SAT 4 pcs.
Frequency range SAT 950... 2400 MHz
The DRS 0524 is a stand alone multiswitch with five inputs for
the distribution of one satellite and terrestrial signals. The stand
alone device is equipped with an integrated power supply which
ensures the LNB powering. Additionally integrated is a 22 KHz
generator which allows the usage of Quad-LNBs. Commercially
available DVB-S/S2 set-top-boxes or TVs with an integrated recei-
ver can be used at the 24 subscriber outputs. Inserted terrestrial
signals like DVB-T/T2, DAB or FM are available at each subscriber
output as well. The very low insertion loss of the DRS 0524 is
realised through an active terrestrial and satellite path.
Technical data
Impedance 75
Operating temperature range 0...+55 °C
Weight 0.86 kg
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Terrestrial trunk
Inputs TERR 1 pcs.
Frequency range TERR 40... 862 MHz
Dimensions (width x height x
depth)
characteristics
324 x 140 x 63 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR >10 dB
Subscriber outputs
Outputs 24 pcs.
Frequency range 40…2400 MHz
TERR type active
Insertion loss SAT 5...0 dB
Insertion TERR 2 dB (±2 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 84 dBµV
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz
◼ Stand alone multiswitch for the distribution of 4 satellite polarisa-
tions and terrestrial signals
◼ Quad-LNB support
◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without
an additional amplifier
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs
◼ Made in Germany
Current consumption from
receiver
30 mA
F-socket 29 pcs.
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
General data
Power indicator LED
Quad LNB support Yes
LNB supply voltage 14 V/18 V (22 kHz)
Current consumption LNB max. 500 mA
Operating voltage 90...264 V AC, 50/60 Hz
Power consumption max. 7 W typ.
Screening factor Class A, according to EN 50083-2
18 Multiswitch FLEXSWITCH
Connectors
Multiswitch 5 inputs, stand alone
DRS 0532 FLEXSWITCH multiswitch 5 in 32, stand alone
Technical data
SAT-IF trunk
Inputs SAT 4 pcs.
Frequency range SAT 950... 2400 MHz
The DRS 0532 is a stand alone multiswitch with five inputs for
the distribution of one satellite and terrestrial signals. The stand
alone device is equipped with an integrated power supply which
ensures the LNB powering. Additionally integrated is a 22 KHz
generator which allows the usage of Quad-LNBs. Commercially
available DVB-S/S2 set-top-boxes or TVs with an integrated recei-
ver can be used at the 32 subscriber outputs. Inserted terrestrial
signals like DVB-T/T2, DAB or FM are available at each subscriber
output as well. The very low insertion loss of the DRS 0532 is
realised through an active terrestrial and satellite path.
Technical data
Impedance 75
Operating temperature range 0...+55 °C
Weight 0.9 kg
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Terrestrial trunk
Inputs TERR 1 pcs.
Frequency range TERR 40... 862 MHz
Dimensions (width x height x
depth)
characteristics
324 x 140 x 63 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR >10 dB
Subscriber outputs
Outputs 32 pcs.
Frequency range 40…2400 MHz
TERR type active
Insertion loss SAT 5...0 dB
Insertion TERR 2 dB (±2 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 84 dBµV
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz
◼ Stand alone multiswitch for the distribution of 4 satellite polarisa-
tions and terrestrial signals
◼ Quad-LNB support
◼ Active terrestrial path to distribute DVB-T/T2, DAB and FM without
an additional amplifier
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs
◼ Made in Germany
Current consumption from
receiver
30 mA
F-socket 37 pcs.
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
General data
Power indicator LED
Quad LNB support Yes
LNB supply voltage 14 V/18 V (22 kHz)
Current consumption LNB max. 500 mA
Operating voltage 90...264 V AC, 50/60 Hz
Power consumption max. 7 W typ.
Screening factor Class A, according to EN 50083-2
Multiswitch FLEXSWITCH 19
Connectors
Multiswitch 9 inputs, cascade
DRC 0908 FLEXSWITCH multiswitch 9 in 8, cascade, TERR. passive
The DRC 0908 is a cascadable multiswitch with nine inputs for
the distribution of two satellites and terrestrial signals. The polari-
sations are available at nine cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the eight
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 0908 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 8 pcs.
Outputs SAT 8 pcs.
Frequency range SAT 950...2400 MHz
Through loss SAT 1 dB (±1 dB)
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Technical data
Power consumption max. 10 dB
Subscriber outputs
Outputs 8 pcs.
Frequency range 5...2400 MHz
TERR type Passive
Insertion loss SAT 0...-2 dB
Insertion TERR 24 dB (±2 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 8 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
45 mA
F-socket 17 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
20 Multiswitch FLEXSWITCH
General data
Connectors
Multiswitch 9 inputs, cascade
DRC 0912 FLEXSWITCH multiswitch 9 in 12, cascade, TERR. passive
The DRC 0912 is a cascadable multiswitch with nine inputs for
the distribution of two satellites and terrestrial signals. The polari-
sations are available at nine cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 12
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 0912 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 8 pcs.
Outputs SAT 8 pcs.
Frequency range SAT 950...2400 MHz
Through loss SAT 1...3 dB (±2 dB)
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Technical data
Power consumption max. 10 dB
Subscriber outputs
Outputs 12 pcs.
Frequency range 5...2400 MHz
TERR type Passive
Insertion loss SAT 2...0 dB
Insertion TERR 28 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 8 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
45 mA
F-socket 21 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
Multiswitch FLEXSWITCH 21
General data
Connectors
Multiswitch 9 inputs, cascade
DRC 0916 FLEXSWITCH multiswitch 9 in 16, cascade, TERR. passive
The DRC 0916 is a cascadable multiswitch with nine inputs for
the distribution of two satellites and terrestrial signals. The polari-
sations are available at nine cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 16
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 0916 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 8 pcs.
Outputs SAT 8 pcs.
Frequency range SAT 950...2400 MHz
Through loss SAT 4 dB (±2 dB)
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Technical data
Power consumption max. 10 dB
Subscriber outputs
Outputs 16 pcs.
Frequency range 5...2400 MHz
TERR type Passive
Insertion loss SAT 2...0 dB
Insertion TERR 28 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 8 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
45 mA
F-socket 25 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
22 Multiswitch FLEXSWITCH
General data
Connectors
Multiswitch 9 inputs, cascade
DRC 0924 FLEXSWITCH multiswitch 9 in 24, cascade, TERR. passive
The DRC 0924 is a cascadable multiswitch with nine inputs for
the distribution of two satellites and terrestrial signals. The polari-
sations are available at nine cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 24
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 0924 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 8 pcs.
Outputs SAT 8 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 2...4 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Technical data
Power consumption max. 10 dB
Subscriber outputs
Outputs 24 pcs.
Frequency range 5…2400 MHz
TERR type Passive
Insertion loss SAT 2...0 dB
Insertion TERR 33 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 8 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
45 mA
F-socket 33 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
Multiswitch FLEXSWITCH 23
General data
Connectors
Multiswitch 9 inputs, cascade
DRC 0932 FLEXSWITCH multiswitch 9 in 32, cascade, TERR. passive
The DRC 0932 is a cascadable multiswitch with nine inputs for
the distribution of two satellites and terrestrial signals. The polari-
sations are available at nine cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 32
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 0932 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 8 pcs.
Outputs SAT 8 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 2...4 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Technical data
Power consumption max. 10 dB
Subscriber outputs
Outputs 32 pcs.
Frequency range 5…2400 MHz
TERR type Passive
Insertion loss SAT 2...0 dB
Insertion TERR 32 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 8 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
45 mA
F-socket 41 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
24 Multiswitch FLEXSWITCH
General data
Connectors
Multiswitch 9 inputs, receiver powered
DRR 0908 FLEXSWITCH multiswitch, receiver power, 9 in 8
The DRR 0908 is a receiver powered multiswitch with nine
inputs for the distribution of two satellite and terrestrial signals.
Commercially available DVB-S/S2 set-top-boxes or TVs with an
integrated receiver can be used at the eight subscriber outputs.
Inserted terrestrial signals like DVB-T/T2, DAB or FM are available
at each subscriber output as well. The very low insertion loss of
the DRR 0508 is realised through an active satellite path. Through
the passive terrestrial path, it is possible to feed in multimedia
services like “LAN over Coax” or signals from a headend system.
The LNB is powered by the switching voltage of the connected
receivers and an additional power supply is not required, which
reduces the operating costs.
Weight 0.48 kg
Inputs SAT 8 pcs.
Frequency range SAT 950... 2400 MHz
Decoupling SAT -SAT 30 dB typ.
Return loss SAT >10 dB
Terrestrial trunk
Dimensions (width x height x
depth)
characteristics
230 x 110 x 63 mm
Inputs TERR 1 pcs.
Frequency range TERR 5... 862 MHz
Isolation TERR - SAT 30 dB typ.
Return loss TERR >10 dB
Subscriber outputs
Outputs 8 pcs.
Frequency range 5...2400 MHz
TERR type Passive
Insertion loss SAT 4...-2 dB
Insertion TERR 15 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Receiver powered multiswitch for the distribution of 8 satellite pola-
risations and terrestrial signals
◼ Power supply-free usage
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs
◼ Made in Germany
Current consumption from
receiver
56 mA
F-socket 17 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage receiver powered
Power consumption max.
Multiswitch 13 inputs, cascade
DRC 1308 FLEXSWITCH multiswitch 13 in 8, cascade, TERR. passive
The DRC 1308 is a cascadable multiswitch with 13 inputs for the
distribution of three satellites and terrestrial signals. The polari-
sations are available at 13 cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the eight
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 1308 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 12 pcs.
Outputs SAT 12 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 1...2 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT > 10 dB
Technical data
Power consumption max. < 0,2 W
Screening factor Class A, according to EN 50083-2
Impedance 75
Operating temperature range -20…70 °C
Cascadable with DRC 1308, DRC 1312, DRC
1316, DRC 1324, DRC 1332
Weight 0.72 kg
Terrestrial trunk
Inputs TERR 1 pcs.
Outputs TERR 1 pcs.
Frequency range TERR 5... 862 MHz
Through loss TERR 2...3 dB
Dimensions (width x height x
depth)
characteristics
130x 290 x 63 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR > 10 dB
Subscriber outputs
Outputs 8 pcs.
Frequency range 5…2400 MHz
TERR type Passive
Insertion loss SAT 4...0 dB
Insertion TERR 24 dB (±2 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 12 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
55 mA
F-socket 21 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
26 Multiswitch FLEXSWITCH
General data
Connectors
Multiswitch 13 inputs, cascade
DRC 1312 FLEXSWITCH multiswitch 13 in 12, cascade, TERR. passive
The DRC 1312 is a cascadable multiswitch with 13 inputs for the
distribution of three satellites and terrestrial signals. The polari-
sations are available at 13 cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 12
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 1312 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 12 pcs.
Outputs SAT 12 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 1...3 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT > 10 dB
Technical data
Power consumption max. < 0,2 W
Screening factor Class A, according to EN 50083-2
Impedance 75
Operating temperature range -20…70 °C
Cascadable with DRC 1308, DRC 1312, DRC
1316, DRC 1324, DRC 1332
Weight 0.98 kg
Terrestrial trunk
Inputs TERR 1 pcs.
Outputs TERR 1 pcs.
Frequency range TERR 5... 862 MHz
Through loss TERR 2...5 dB
Dimensions (width x height x
depth)
characteristics
189 x 291 x 63 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR > 10 dB
Subscriber outputs
Outputs 12 pcs.
Frequency range 5…2400 MHz
TERR type Passive
Insertion loss SAT 3...0 dB
Insertion TERR 28 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 12 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
55 mA
F-socket 25 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
Multiswitch FLEXSWITCH 27
General data
Connectors
Multiswitch 13 inputs, cascade
DRC 1316 FLEXSWITCH multiswitch 13 in 16, cascade, TERR. passive
The DRC 1316 is a cascadable multiswitch with 13 inputs for the
distribution of three satellites and terrestrial signals. The polari-
sations are available at 13 cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 16
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 1316 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 12 pcs.
Outputs SAT 12 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 1...3 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT > 10 dB
Technical data
Power consumption max. < 0,2 W
Screening factor Class A, according to EN 50083-2
Impedance 75
Operating temperature range -20…70 °C
Cascadable with DRC 1308, DRC 1312, DRC
1316, DRC 1324, DRC 1332
Weight 1.04 kg
Terrestrial trunk
Inputs TERR 1 pcs.
Outputs TERR 1 pcs.
Frequency range TERR 5... 862 MHz
Through loss TERR 2...5 dB
Dimensions (width x height x
depth)
characteristics
189 x 291 x 63 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR > 10 dB
Subscriber outputs
Outputs 16 pcs.
Frequency range 5…2400 MHz
TERR type Passive
Insertion loss SAT 3...0 dB
Insertion TERR 28 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 12 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
55 mA
F-socket 29 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
28 Multiswitch FLEXSWITCH
General data
Connectors
Multiswitch 13 inputs, cascade
DRC 1324 FLEXSWITCH multiswitch 13 in 24, cascade, TERR. passive
The DRC 1324 is a cascadable multiswitch with 13 inputs for the
distribution of three satellites and terrestrial signals. The polari-
sations are available at 13 cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 24
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 1324 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 12 pcs.
Outputs SAT 12 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 2...5 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT > 10 dB
Technical data
Power consumption max. < 0,2 W
Screening factor Class A, according to EN 50083-2
Impedance 75
Operating temperature range -20…70 °C
Cascadable with DRC 1308, DRC 1312, DRC
1316, DRC 1324, DRC 1332
Weight 1.52 kg
Terrestrial trunk
Inputs TERR 1 pcs.
Outputs TERR 1 pcs.
Frequency range TERR 5... 862 MHz
Through loss TERR 3...5 dB
Dimensions (width x height x
depth)
characteristics
310 x 293 x 63 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR > 10 dB
Subscriber outputs
Outputs 24 pcs.
Frequency range 5…2400 MHz
TERR type Passive
Insertion loss SAT 2...0 dB
Insertion TERR 33 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50…110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 12 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
55 mA
F-socket 37 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
Multiswitch FLEXSWITCH 29
General data
Connectors
Multiswitch 13 inputs, cascade
DRC 1332 FLEXSWITCH multiswitch 13 in 32, cascade, TERR. passive
The DRC 1332 is a cascadable multiswitch with 13 inputs for the
distribution of three satellites and terrestrial signals. The polari-
sations are available at 13 cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 32
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 1332 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 12 pcs.
Outputs SAT 12 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 2...5 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT > 10 dB
Technical data
Power consumption max. < 0,2 W
Screening factor Class A, according to EN 50083-2
Impedance 75
Operating temperature range -20…70 °C
Cascadable with DRC 1308, DRC 1312, DRC
1316, DRC 1324, DRC 1332
Weight 1.52 kg
Terrestrial trunk
Inputs TERR 1 pcs.
Outputs TERR 1 pcs.
Frequency range TERR 5... 862 MHz
Through loss TERR 3...5 dB
Dimensions (width x height x
depth)
characteristics
310 x 293 x 63 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR > 10 dB
Subscriber outputs
Outputs 32 pcs.
Frequency range 5…2400 MHz
TERR type Passive
Insertion loss SAT 2...0 dB
Insertion TERR 33 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50…110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 12 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
55 mA
F-socket 45 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
30 Multiswitch FLEXSWITCH
General data
Connectors
Multiswitch 17 inputs, cascade
DRC 1708 FLEXSWITCH multiswitch 17 in 8, cascade, TERR. passive
The DRC 1708 is a cascadable multiswitch with 17 inputs for the
distribution of four satellites and terrestrial signals. The polarisa-
tions are available at 17 cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the eight
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 1708 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 16 pcs.
Outputs SAT 16 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 1...2 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT > 10 dB
Technical data
Power consumption max. < 0,2 W
Screening factor Class A, according to EN 50083-2
Impedance 75
Operating temperature range -20…70 °C
Cascadable with DRC 1708, DRC 1712, DRC
1716, DRC 1724, DRC 1732
Weight 0.76 kg
Terrestrial trunk
Inputs TERR 1 pcs.
Outputs TERR 1 pcs.
Frequency range TERR 5... 862 MHz
Through loss TERR 2...3 dB
Dimensions (width x height x
depth)
characteristics
130 x 290 x 63 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR > 10 dB
Subscriber outputs
Outputs 8 pcs.
Frequency range 5…2400 MHz
TERR type Passive
Insertion loss SAT 2...0 dB
Insertion TERR 24 dB (±2 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 16 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
55 mA
F-socket 25 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
Multiswitch FLEXSWITCH 31
General data
Connectors
Multiswitch 17 inputs, cascade
DRC 1712 FLEXSWITCH multiswitch 17 in 12, cascade, TERR. passive
The DRC 1712 is a cascadable multiswitch with 17 inputs for the
distribution of four satellites and terrestrial signals. The polarisa-
tions are available at 17 cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 12
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 1712 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 16 pcs.
Outputs SAT 16 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 1...3 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT > 10 dB
Technical data
Power consumption max. < 0,2 W
Screening factor Class A, according to EN 50083-2
Impedance 75
Operating temperature range -20…70 °C
Cascadable with DRC 1708, DRC 1712, DRC
1716, DRC 1724, DRC 1732
Weight 1 kg
Terrestrial trunk
Inputs TERR 1 pcs.
Outputs TERR 1 pcs.
Frequency range TERR 5... 862 MHz
Through loss TERR 2...5 dB
Dimensions (width x height x
depth)
characteristics
189 x 291 x 63 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR > 10 dB
Subscriber outputs
Outputs 12 pcs.
Frequency range 5…2400 MHz
TERR type Passive
Insertion loss SAT 3...0 dB
Insertion TERR 28 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 16 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
55 mA
F-socket 29 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
32 Multiswitch FLEXSWITCH
General data
Connectors
Multiswitch 17 inputs, cascade
DRC 1716 FLEXSWITCH multiswitch 17 in 16, cascade, TERR. passive
The DRC 1716 is a cascadable multiswitch with 17 inputs for the
distribution of four satellites and terrestrial signals. The polarisa-
tions are available at 17 cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 16
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 1716 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 16 pcs.
Outputs SAT 16 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 1...3 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT > 10 dB
Technical data
Power consumption max. < 0,2 W
Screening factor Class A, according to EN 50083-2
Impedance 75
Operating temperature range -20…70 °C
Cascadable with DRC 1708, DRC 1712, DRC
1716, DRC 1724, DRC 1732
Weight 1.02 kg
Terrestrial trunk
Inputs TERR 1 pcs.
Outputs TERR 1 pcs.
Frequency range TERR 5... 862 MHz
Through loss TERR 2...5 dB
Dimensions (width x height x
depth)
characteristics
189 x 291 x 63 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR > 10 dB
Subscriber outputs
Outputs 16 pcs.
Frequency range 5…2400 MHz
TERR type Passive
Insertion loss SAT 3...0 dB
Insertion TERR 28 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 16 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
55 mA
F-socket 33 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
Multiswitch FLEXSWITCH 33
General data
Connectors
Multiswitch 17 inputs, cascade
DRC 1724 FLEXSWITCH multiswitch 17 in 24, cascade, TERR. passive
The DRC 1724 is a cascadable multiswitch with 17 inputs for the
distribution of four satellites and terrestrial signals. The polarisa-
tions are available at 17 cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the 24
subscriber outputs. Inserted terrestrial signals like DVB-T/T2, DAB
or FM are available at each subscriber output as well. The very
low insertion loss of the DRC 1724 is realised through an active
satellite path. Through the passive terrestrial path it is possible to
feed in multimedia services like “LAN over Coax”, or signals from
a central headend system. The LNBs can be powered by previous-
ly installed amplifiers, or the available power supply DRP 1533.
Technical data
SAT-IF trunk
Inputs SAT 16 pcs.
Outputs SAT 16 pcs.
Frequency range SAT 950... 2400 MHz
Through loss SAT 2...5 dB
Decoupling SAT -SAT 30 dB typ.
Return loss SAT > 10 dB
Technical data
Power consumption max. < 0,2 W
Screening factor Class A, according to EN 50083-2
Impedance 75
Operating temperature range -20…70 °C
Cascadable with DRC 1708, DRC 1712, DRC
1716, DRC 1724, DRC 1732
Weight 1.54 kg
Terrestrial trunk
Inputs TERR 1 pcs.
Outputs TERR 1 pcs.
Frequency range TERR 5... 862 MHz
Through loss TERR 3...5 dB
Dimensions (width x height x
depth)
characteristics
310 x 293 x 63 mm
Isolation TERR - SAT 30 dB typ.
Return loss TERR > 10 dB
Subscriber outputs
Outputs 24 pcs.
Frequency range 5…2400 MHz
TERR type Passive
Insertion loss SAT 2...0 dB
Insertion TERR 33 dB (±3 dB)
Max. output level subscriber SAT 102 dBµV
Max. output level subscriber TERR 50...110 dBµV (passive)
Return loss subscriber SAT >10 dB
Return loss subscriber TERR >10 dB
Control signal 14/18 V, 0/22 kHz, DiSEqC 1.0
◼ Cascadable multiswitch for the distribution of 16 satellite polarisa-
tions and terrestrial signals
◼ Passive terrestrial path
◼ Integrated SAT amplifier for low insertion loss
◼ Pre-emphasis to compensate the cable loss at high frequencies
◼ Terrestrial signals available at the receiver without any power supply
of the multiswitch
◼ High screening efficiency according to Class A
◼ Compact dimensions paired with installation friendly distance bet-
ween the F-connectors
◼ Colour-coded inputs and outputs
◼ Made in Germany
Current consumption from
receiver
55 mA
F-socket 41 pcs.
DC supply voltage Connector type DC 5.5/2.1 mm
Colour-coding VL = black; HL = green; VH = red;
HH = yellow
Power indicator LED
Operating voltage 15 V DC
34 Multiswitch FLEXSWITCH
General data
Connectors
Multiswitch 17 inputs, cascade
DRC 1732 FLEXSWITCH multiswitch 17 in 32, cascade, TERR. passive
The DRC 1732 is a cascadable multiswitch with 17 inputs for the
distribution of four satellites and terrestrial signals. The polarisa-
tions are available at 17 cascade outputs for the installation of
further multiswitches. Commercially available DVB-S/S2 set-top-
boxes or TVs with an integrated receiver can be used at the