CATALOG | VOL 9...1704-339-01 JT1720/JT2020M1/JT2720, 2.00" EZ2 (Hard-Faced) 4.95 lbs. $139.99...

CATALOG | VOL 9

800.654.3484sourcehdd.com | straightlinehdd.com

HDDPRODUCTS

The Source: HDD/StraightLine HDD merger creates a central point for clients to access four essential, solutions-based assets:

•The industry’s largest knowledge base. As early pioneers in HDD, the combined company provides access to a deep knowledge of what works—and what doesn’t work—in HDD.

•An unwavering commitment to service. When you need a solution, you can count on someone being available, at any time, including weekends. Industry leading turnaround time on thousands of parts, plus access to our custom tooling design team are part of our 100 percent commitment to service.

•Huge product portfolio—from rig to bit. Sometimes the difference between a marginal or profitable job are the right tools and equipment. The merger dramatically expands our ability to tailor solutions to match rig, ground condition, operational and financial needs.

ABOUT US

Leading the new company, Joe Philips (R) and Jay Cary (L) blends decades of HDD experience and a singular focus on tailoring solutions to solve the toughest HDD problems.

In late 2015, Source: HDD and StraightLine HDD® merged. The combination came at a time when HDD operators—facing fierce competition and rising costs—began favoring suppliers who could deliver solutions across the entire range of HDD operations. The Source: HDD/StraightLine HDD merger came as a direct response to this trend.

MERGER FOCUSES ON VALUE

•Creative problem-solving. The scale of available products is matched only by the infinite number of unique combinations available. From mixing new and used tooling and equipment, to trade-ins, services, special financing and brokering, we can creatively structure a deal that works for any operation.

Putting it all together, the new company is unified by our Ready-To-Work promise. This is a promise that every rig, every piece of equipment, every tool, is certified Ready-To-Work the moment it hits your job site.

So if you are looking for a partner that’s focused on creatively identifying tailored, Ready-To-Work solutions, we’d love the opportunity. Call or go online to learn more.

Ditch Witch® and Subsite® are registered trademarks of The Charles Machine Works, Inc., Perry, Oklahoma, USA. Vermeer® and Firestick® are registered trademarks of Vermeer Manufacturing Company of Pella, Iowa, USA. DigiTrak®, DCI® and Spot-D-Tek® are registered trademarks of Digital Control Inc., of Seattle, Washington, USA. Geological Boring® is a registered trademark of Geological Boring LLC of Tacoma, WA, USA. None of these trademarks are in any way associated with StraightLine HDD, INC.

BREAKING NEWS - STRAIGHTLINE HDD, INC. ACQUIRES ARMADRILLCO

Learn more straightlinehdd.com/armadrillco

StraightLine HDD, Inc. recently announced the acquisition of Armadrillco. The move solidifies StraightLine’s strategic position as a world-class supplier of Ready-To-Work HDD solutions. The move also broadens the company’s tooling portfolio targeting hard condition pilot bores.

•Box x box high-flow/side-load transmitter housings•Innovative high-flow/side-load drill heads •Rock tools

1-Piece Sub-Savers2-Piece Drive Chucks & Sub-SaversTransition RodsOctagon CollarsTransmitter Housings, Housing Jets & Nose PiecesHousing Savers (Tail Pieces)BitsSlide WrenchesPipe RacksReplacement TracksConversion SolutionsDrill Pipe

Drill Pipe - StraightLine®

Drill Pipe - Hunting®

Drive Chucks1-Piece Sub-SaversStarter RodsHex CollarsTransmitter Housings &Housing Jets Housing Savers (Tail Pieces)BitsPipe Racks

SwivelsAdaptersBox x Box Transmitter Housings4th Generation Transmitter HousingNose Pieces Steering Shoes & BitsRockeye® Hammer SystemReamersMud Mixing SystemsDrilling Supplies

4 5678

10 14 18 19 202125

2627 283032 33 34

353640

42444546474850567682

DITCH WITCH® COMPATIBLE VERMEER® COMPATIBLE STRAIGHTLINE HDD®

CONTENTS

CONNECT WITH US

Like us on Facebook and follow us on Twitter to stay connected with all the latest news.

straightlinehdd.com sourcehdd.com

TOLL FREE 800.654.3484INTERNATIONAL 620.802.0200

FACEBOOK facebook.com/Sourcehdd

TWITTER twitter.com/Sourcehdd

FACEBOOK facebook.com/straightlinehdd

TWITTER twitter.com/straightlinehdd

SOCIAL OFFICE ADDRESS PHONE NUMBERS

WEB

1816 E. Wasp Rd. Hutchinson, KS 67501

YOUTUBE youtube.com/sourcehdd

YOUTUBE youtube.com/straightlinehdd

4 StraightLine HDD Product Catalog - Volume 9 straightlinehdd.com

1-PIECE SUB-SAVERS

PART # DESCRIPTION WEIGHT PRICE

1703-301-01 Sub-Saver (JT520 Old Style) 2.4 lbs. $199.00

1703-301-02 Sub-Saver (JT520 New Style) 2.5 lbs. $209.00

1703-301-03 Sub-Saver, (JT5, Coarse) 2.5 lbs. $230.00

1703-302-01 Sub-Saver (JT920/JT920L/JT921/JT921L) 5.6 lbs. $239.00

1703-317-01 Sub-Saver (JT922) 11.7 lbs. $249.00

1703-317-02 Sub Saver, JT922/JT9/JT10, Coarse 2.6 lbs. $240.00

1703-314-01 Sub-Saver (JT1220M1) 11.7 lbs. $419.00

1703-303-01 Sub-Saver (JT1720/JT1720M1) 7.2 lbs. $259.00

1703-311-01 Sub-Saver (JT2020M1) 16 lbs. $429.00

1703-304-01 Sub-Saver (JT2720) 12.1 lbs. $349.00

1703-305-01 Sub-Saver (JT4020) 19.3 lbs. $595.00

Subjected to thousands of torque transfer cycles, thrust pull-back and breakout, the sub-saver is the foundation of the down-hole operation. Precision machined using 4145 heat-treated materials, StraightLine HDD® drive chucks and sub-savers are designed to keep performing long after others have failed.

DITCH WITCH® COMPATIBLE

straightlinehdd.com Product Catalog - Volume 9 StraightLine HDD 5

2-PIECE DRIVE CHUCKS & SUB-SAVERSDITCH WITCH® COMPATIBLE


1703-315-01 Drive Chuck (JT2720M1 - Small Flange) 18.05 lbs. $595.00

1703-318-01 Drive Chuck (JT2720M1/JT2720AT - Large Flange) 23.5 lbs. $675.00

1703-316-01 Drive Chuck (JT3020M1/JT3020AT) 20.8 lbs. $695.00

1703-319-01 Drive Chuck (JT4020M1 - Small Flange) 18.75 lbs. $695.00

1703-320-01 Drive Chuck (JT4020AT/JT4020M1 - Large Flange) 19 lbs. $795.00

65312 Drive Chuck (JT7020/JT8020/JT100 - 2 7/8" IF Pin 27 lbs. $699.00


1703-315-02 Sub-Saver (JT2720M1) 19.7 lbs. $295.00

1703-315-03 Sub-Saver (JT2720AT) 22.3 lbs. $365.00

1703-316-02 Sub-Saver (JT3020M1) 35.1 lbs. $275.00

1703-316-03 Sub-Saver (JT3020AT) 39.9 lbs. $375.00

1703-319-02 Sub-Saver (JT4020M1) 33.8 lbs. $380.00

1703-320-03 Sub-Saver (JT4020M1, with All-Terrain Drive Chuck) 24.85 lbs. $395.00

1703-320-02 Sub-Saver (JT4020AT) 33 lbs. $395.00

CALL Sub-Saver (JT7020/JT8020/JT100) CALL CALL

Ditch Witch® operators who deploy StraightLine HDD’s unique 2-piece drive chuck/sub-savers see an immediate sav-ings in operating costs. It’s simple math: when the threads of the sub-saver requires replacement, instead of replacing the en-tire part, a 2-piece system requires only the sub-saver to be replaced—at less than one-third the cost of a 1-piece design.

Tip: The sub-saver is subjected to tremendous stress. Protect your bore from costly down-time by inspecting and replacing your sub-saver at the first sign of wear.

D O N ’ T F O R G E TTHREAD LUBE

SEE PAGE

85


TRANSITION RODS DITCH WITCH® COMPATIBLE

PART# DESCRIPTION WEIGHT PRICE

1703-301-03 JT5 Coarse Pin x 1.32" EZ 2 Pin (JT5) 2.35 lbs. $289.00

1704-310-01 JT520 Pin x 1.325" EZ2 Pin (JT520) 8 lbs. $249.00

1704-314-01 JT920 Fine Pin x 1.625" EZ2 Pin (JT920/JT920L/JT921/JT921S/JT922) 12 lbs. $319.00

1704-349-01 JT922/JT9 Coarse Pin x 1.62" EZ 2 Pin (JT922/JT9/JT10) 3.35 lbs. $335.00

1704-319-01 JT1220M1 Pin x 1.875" EZ3 Pin (JT1220M1) 22.8 lbs. $449.00


1704-318-01 JT2020M1 Pin x 2.00" EZ2 Pin (JT2020M1) 31 lbs. $399.00


1704-333-01 JT2720 Pin x 2.25" EZ3 Pin (JT2720) 37.45 lbs. $695.00

1704-332-01 JT2720M1 Pin x 2.00" EZ2 Pin (JT2720M1/JT3020M1) 35.25 lbs. $439.00



1704-329-01 JT2720M1 Pin x JT4020M1 Pin (JT2720M1/JT3020M1) 69.5 lbs. $499.00

1704-344-01 JT3020AT Pin x 2.00" EZ2 Pin (JT2720AT/JT3020AT) 41 lbs. $649.00

1704-324-01 JT3020AT Pin x 2.25" EZ3 Pin (JT2720AT/JT3020AT) 41 lbs. $569.00

1704-328-01 JT3020AT Pin x JT4020M1 Pin (JT2720AT/JT3020AT) 44.1 lbs. $529.00

1704-321-01 JT4020 Pin x 2.625" EZ2 Pin (JT4020) 55.45 lbs. $649.00

1704-322-01 JT4020M1 Pin x 2.625" EZ2 Pin (JT4020M1) 60.45 lbs. $649.00

1704-327-01 JT4020M1 Pin x JT4020M1 Pin (JT4020M1) 62.3 lbs. $529.00

1704-350-01 JT40 Pin x 2.63" EZ 2 Pin 10.11 lbs. $849.00

1704-351-01 JT60 Pin x 2.85: EZ 2 Pin 14 lbs. $895.00

1704-335-01 JT7020 Pin x JT7020 Pin, 48" Shoulder to Shoulder (JT7020/JT8020/JT100) 71 lbs. $995.00

Using StraightLine HDD® transition rods give Ditch Witch® drill operators a non-torqued connection between the transition rod and the down-hole tool for safe and convenient tool installation. By design, our transition rods’ length and condensed mid-body diameter reduce stress loads exerted on the drill pipe.


OCTAGON COLLARSDITCH WITCH® COMPATIBLE


1704-315-01 JT520, 1.325" EZ2 1.2 lbs. $64.50

1704-337-01 JT920/JT920L/JT921/JT922, 1.625" EZ2(Hard-Faced)

2.6 lbs. $102.99

1704-338-01 JT1220M1, 1.875" EZ3 (Hard-Faced) 4.05 lbs. $129.99

1704-339-01 JT1720/JT2020M1/JT2720, 2.00" EZ2(Hard-Faced)

4.95 lbs. $139.99



1704-342-01 JT4020/JT4020M1, 2.625" EZ2 (Hard-Faced) 9.9 lbs. $219.00

When the collar is installed over the flats on transition rods, StraightLine HDD® hard-faced collars prevent thread over-torquing, while maximizing durability and wear resistance.

g o o n l i n eTO ORDER NOW!


DITCH WITCH® COMPATIBLETRANSMITTER HOUSINGSPART # DESCRIPTION WEIGHT PRICE

1201-101-06 2", 3-Bolt Pattern (Complete assembly, including nose piece & canoe), Box x DW, SBRP/DS

13.26 lbs. $895.00

1201-101-14 2 3/4", 86B, 5-Bolt Pattern, 2.00" IF Box 38 lbs. $849.00

1201-101-15 3", 86B, 5-Bolt Pattern, 2.00" IF Box 41 lbs. $895.00

1201-101-16 3 1/4", 86B, 6-Bolt Pattern, 2.375" REG Box 57 lbs. $1,050.00

1201-101-13 3 7/8", 86B, 6-Bolt Pattern, 2.875" REG Box 88 lbs. $1,799.00


1201-202-10 Housing Jet, 1/8" hole (fits 2 3/4" - 3 1/4" Housings) 1.1 lbs. $32.99


1201-202-12 Housing Jet, 3/8" hole (fits 3 7/8" - 4 3/4" Housing) 1.1 lbs. $60.00


1201-102-07 Nose Piece, 2 Holes x .063" - 2" JT520 Housing 0.5 lbs. $45.00

HOUSING JETS

NOSE PIECE

ARMADRILLCOTRANSMITTER

HOUSINGS V I S I Tstraightlinehdd.com/armadrillco


Consisting of a housing body, jet and optional tail piece, our Ditch Witch® compatible housings offer enhanced service life over OEM and other aftermarket housings. Available in 2-, 2 ¾-, 3-, 3 ¼- & 3 7/8-inch OD to match your drill and drilling conditions, all housings are designed to accept Subsite® Beacons.

StraightLine HDD Ditch Witch® compatible transmitter housings are available for all drills from the JT520 to JT100M1.

Tip: When selecting a transmitter housing, don’t forget that bit selection is a critical choice when planning a bore. StraightLine HDD® manufactures a variety of bits that bolt-on perfectly to your Ditch Witch® compatible transmitter housing. Each bit is built to last multiple bores and engineered to perform in whatever soil condition you may encounter. See pages 14 – 17 for more information.


AD520P520P JT520 Pin x JT520 Pin 2.8 lbs. $129.00

AD520P132EZ2B JT520 Pin x 1.325" EZ2 Box 1.35 lbs. $129.00


AD2720P1220P JT2720 Pin x JT1220M1 Pin 6.5 lbs. $195.00




DITCH WITCH® COMPATIBLEHOUSING SAVERS (TAIL PIECES)

All of our high quality housing savers are precision milled from tough 4145 heat-treated materials for maximum strength and service life. Available in a wide assortment of threads and connection types, our housing savers represent the latest generation of tools designed to lower operational costs, while boosting efficiencies.

“Working with these guys over the last

several years it’s clear they value building

relationships and trust, not about making a one-

time deal.”

Jesse Wilcoxon, Operations Manager

Fusion HDDOklahoma City, OK



AD2720P2720M1P JT2720 Pin x JT2720M1 Pin 15.4 lbs. $199.00





AD200IFP920P 2.00" IF Pin x JT920 Pin 7 lbs. $195.00

AD200IFP1220P 2.00" IF Pin x JT1220 Pin 7.3 lbs. $195.00

AD200IFP1720P 2.00" IF Pin x JT1720 Pin 8 lbs. $179.00

AD200IFP2720P 2.00" IF Pin x JT2720 Pin 7.29 lbs. $175.00

AD200IFP2720M1P 2.00" IF Pin x JT2720M1 Pin 10.25 lbs. $195.00

AD200IFP162EZ2B 2.00" IF Pin x 1.625" EZ2 Box 8.2 lbs. $195.00

AD200IFP187EZ3B 2.00" IF Pin x 1.875" EZ3 Box 5.5 lbs. $209.00

AD200IFP200EZ2B 2.00" IF Pin x 2.00" EZ2 Box 8 lbs. $199.00

CALL

NOW




AD200IFP225EZ2B 2.00" IF Pin x 2.25" EZ2 Box 9 lbs. $295.00

AD237REGP2720ATP 2.375" REG Pin x JT2720AT Pin 13.25 lbs. $219.00

AD237REGP2720M1P 2.375" REG Pin x JT2720M1 Pin 12 lbs. $219.00

AD237REGP4020P 2.375" REG Pin x JT4020 Pin 12.50 lbs. $249.00

AD237REGP4020M1P 2.375" REG Pin x JT4020M1 Pin 13.8 lbs. $249.00

AD4020M1B237REGP JT4020M1 Box x 2.375" REG Pin 15.5 lbs. $249.00

AD4020ATP237REGP JT4020AT Pin x 2.375" REG Pin 18.6 lbs. $249.00

AD237REGP200EZ2B 2.375" REG Pin x 2.00" EZ2 Box 9 lbs. $205.00

AD237REGP225EZ2B 2.375" REG Pin x 2.25" EZ2 Box 9.25 lbs. $249.00

HOUSING SAVERS (TAIL PIECES)

Tip: Down-time costs you money. That’s why you need a partner that’s responsive. With the industry’s broadest line of Ditch Witch® part numbers—with most on the shelf and ready to ship—StraightLine HDD® is the go-to choice when you need parts fast.

TURN IDLED EQUIPMENT

INTO

C A S HCall

888-311-3869 or go to

sourcehdd.com to get started.





AD4020P3020ATP JT4020 Pin x JT3020AT Pin 13 lbs. $219.00

AD4020P4020P JT4020 Pin x JT4020 Pin 14 lbs. $219.00

AD4020P225EZ2B JT4020 Pin x 2.25" EZ2 Box 23 lbs. $249.00


AD4020P263EZ2B JT4020 Pin x 2.625" EZ2 Box 16 lbs. $319.00

AD7020P7020P JT7020 Pin x JT7020 Pin 22 lbs. $295.00


SEE PAGE

85

Tip: As a rule of thumb, larger bits perform better in softer soils (sands, loams, sticky clays), while smaller bits perform better in hard soils (i.e. hardpan, shales, caliche, etc).

BITS

All of our Ditch Witch® Compatible bits feature: •Carbide hard-facing protects the entire bit perimeter.•4140 heat-treated steel plate insures long service life.•Low-cost/long-life delivers an extremely favorable cost per-foot operation.


Every StraightLine HDD® bit is designed to deliver outstanding service life and excellent penetration over multiple bores. Available in many styles and sizes, our bits bolt directly on all Ditch Witch® compatible transmitter housings.

Best Good Fair Less Recommended Not RecommendedLegend -


SANDY SOFT MEDIUM HARD

SOILS

HARD FACE

FANG

CHEVRON

SABRE

RAPTOR

THRASHER

bit selection guideROCK

MEDIUM HARDSOFT

HARD-FACED BITSHard-Faced bits feature generous carbide hard-facing that’s extremely resistant to abrasive conditions.

Hard-Faced bits perform well in: alluvial, clay, sands, small aggregates and gravel.


1301-136-01 Fang, 3" 4.5 lbs. $129.00

1301-136-03 Fang, 4" 7.35 lbs. $149.00

FANG, 5-BOLT


1301-142-03 Fang, 6" 18.5 lbs. $199.00

FANG, 6-BOLT

FANG BITS The steep tapered Fang bit delivers excellent penetration in tough formations. The bit’s reduced surface area dramatically enhances steering performance.

Fang bits perform well in: sand and sandy loams.


1301-134-02 Hard-Faced, 3 1/2" 6.45 lbs. $111.00

1301-134-03 Hard-Faced, 4" 7.32 lbs. $124.00

1301-134-04 Hard-Faced, 4 1/2" 8.61 lbs. $136.00

HARD-FACED, 5-BOLT


1301-146-01 Hard-Faced, 5" 10.42 lbs. $149.00

HARD-FACED, 6-BOLT



BITS DITCH WITCH® COMPATIBLE


1301-137-01 Chevron, 3 1/2" 6.45 lbs. $195.00

1301-137-03 Chevron, 4 1/2" 8.45 lbs. $217.00

CHEVRON, 5-BOLT


1301-143-01 Chevron, 5" 13.45 lbs. $229.00

1301-143-03 Chevron, 6" 16.15 lbs. $249.00

CHEVRON, 6-BOLT

CHEVRON BITS The Chevron features a split-face design, coupled with angular tungsten-carbide cutting surfaces. The result is a bit with excellent steering response—even in tough soil conditions.

Chevron bits perform well in: sand, sandy loams and shale.

SABRE BITS The Sabre was developed as a result of customer requests for a bit with aggressive carbide cutting edges located to insure maximum cutting within the body of the bit. The result is a bit that engages hard pan soil, while maximizing steering in cobble.

Sabre bits perform well in: hardpan or cobble.


1301-439-04 Sabre, 4" 8 lbs. $329.00

SABRE, 5-BOLT


1301-439-05 Sabre, 5" 15.6 lbs. $399.00

1301-439-06 Sabre, 6" 20.3 lbs. $419.00

SABRE, 6-BOLT



1301-138-02 Raptor, 3 1/2" 6.9 lbs. $229.00

1301-138-03 Raptor, 4" 7.9 lbs. $249.00

1301-138-04 Raptor, 4 1/2" 8.95 lbs. $259.00

RAPTOR, 5-BOLT


1301-151-01 Raptor, 5" 15.35 lbs. $269.00

1301-151-03 Raptor, 6" 18.45 lbs. $319.00

RAPTOR, 6-BOLT

RAPTOR BITS The Raptor is an aggressive design featuring carbide buttons lining the entire perimeter. The bit’s angled face eliminates the tendency to

“snag” in rock outcroppings and improves cutting action in tough conditions.

Raptor bits perform well in: tough aggregate conditions.

THRASHER BITSAn aggressive design, the Thrasher features a series of aggressive conical tungsten carbide cutters. The result is an aggressive, long-lasting bit that delivers good results in tough conditions.

Thrasher bits perform well in: hardpan, shale, caliche and sandstone formations.


1301-133-00 Thrasher, 3" 6.47 lbs. $159.00

1301-133-01 Thrasher, 3 1/2" 7.62 lbs. $169.00

1301-133-02 Thrasher, 4" 8.26 lbs. $179.00

THRASHER, 5-BOLT


1301-145-01 Thrasher, 5" 12.55 lbs. $209.00

1301-145-03 Thrasher, 6" 16.01 lbs. $249.00

THRASHER, 6-BOLT


SLIDE WRENCHES

Stop paying too much for your slide wrenches. Built to the same exacting standards as all StraightLine HDD® tools, our Ditch Witch® compatible slide wrenches do the job at a fraction of the cost.



6201-101-01 Wrench (JT520) 11.68 lbs. $419.00

6201-102-01 Wrench (JT920/JT920L) 14.2 lbs. $429.00

6201-103-01 Wrench, Round Sensor, Horizontal (JT1720) 18.2 lbs. $519.00

6201-103-02 Wrench, Square Sensor (JT1720) 18.2 lbs. $519.00

6201-103-03 Wrench, Round Sensor, Vertical (JT1720) 18.2 lbs. $519.00

6201-104-01 Wrench, No Sensor, (JT1720/JT2321) 17.5 lbs. $519.00

6201-105-01 Wrench (JT2720) 39.8 lbs. $589.00

6201-106-01 Wrench (JT4020) 105 lbs. $1,199.00


Looking to add a spare pipe rack or replace altogether? StraightLine HDD® manufactures a complete line of durable Ditch Witch® pipe racks.

PIPE RACKSDITCH WITCH® COMPATIBLE


1901-101-01 Holds 40 pieces (JT920L) 195 lbs. $1,495.00

1901-101-02 Holds 40 pieces (JT1720) 350 lbs. $1,495.00



1901-102-17 Holds 50 pieces (JT3020M1) 980 lbs. $3,495.00

1901-101-08 Holds 40 pieces (JT40) 1,536 lbs. $4,995.00

1901-101-09 Holds 24 pieces (AT40) 1,200 lbs $5,495.00


1901-102-18 Holds 32 pieces (JT4020M1) 943 lbs. $4,495.00

1901-101-05 Holds 9 pieces (JT4020AT) 918 lbs. $3,595.00

1901-101-06 Holds 12 pieces (JT7020/JT8020/JT100) 850 lbs. $3,895.00


DITCH WITCH® COMPATIBLEREPLACEMENT TRACKS


6203-101-01 Rubber Tracks (JT520) 64 lbs. $375.00

6203-102-01 Rubber Tracks (JT820/JT920/JT920L/JT3510) 164 lbs. $575.00

6203-103-01 Rubber Tracks (JT1720/JT2020M1) 189 lbs. $725.00

6203-104-01 Rubber Tracks (JT2720) 336 lbs. $1,495.00

6203-104-02 Rubber Tracks (JT2720M1/JT2720AT/JT3020M1/ JT3020AT)

341 lbs. $1,495.00

6203-105-01 Rubber Tracks (JT4020) 747 lbs. $2,595.00

6203-106-01 Rubber Tracks (JT7020/JT8020/JT100) 955 lbs. $3,725.00

If it’s time to replace the worn tracks on your Ditch Witch® rig, look to StraightLine HDD®. Our complete line of Ditch Witch® compatible replacement tracks are 20 percent heavier than the competition and feature a heavy-duty, one-piece internal steel cable that’s stretch and tear resistant.


CONVERSION SOLUTIONSDITCH WITCH® TO VERMEER® SUB SAVERS


Convert your Ditch Witch® rig to run 1-piece forged drill pipe. StraightLine HDD® conversion solutions will extend the life of your drill pipe and lower your operating costs.


1703-322-01 Sub Saver (JT922 w/1.66" FS1 Box) 9.2 lbs. $299.00



1703-322-07 Sub Saver (JT1220 w/2.06" FS1 Pin) 10.8 lbs. $419.00

1703-303-02 Sub Saver (JT1720 w/2.06" FS1 Box) 8 lbs. $395.00



1703-322-06 Sub Saver, Crossover (JT2720M1/JT2720AT w/2.375" FS1 Box)† 23.8 lbs. $459.00

1703-315-04 Sub Saver, Crossover (JT2720M1/JT2720AT x 2.375" FS1 Pin)† 24.2 lbs. $365.00

1703-322-04 Sub Saver (JT3020M1/JT3020AT w/2.375" FS1 Box)† 35 lbs. $365.00

1703-325-02 Sub Saver (JT3020M1/JT3020AT w/2.375" FS1 Pin)† 35 lbs. $365.00



D O N ’ T F O R G E TWRENCH KIT

SEE PAGE

84

†Requires the 2-piece Ditch Witch® compatible Drive Chuck (page 3).


DITCH WITCH® COMPATIBLECONVERSION SOLUTIONSDITCH WITCH® TO VERMEER® DRIVE CHUCKS


1703-326-01 Drive Chuck, Crossover (JT920 w/ 2.00" FS1 Pin)* 12.5 lbs. $295.00

1703-323-01 Drive Chuck, Crossover (JT922 w/ 2.00" FS1 Pin)* 13 lbs. $295.00

1703-311-02 Drive Chuck, Crossover (JT2020M1 w/2.375" FS600 Pin)* 17 lbs. $449.00

*Requires the Vermeer® compatible Sub Saver (1703-601-02, page 30).**Requires the Vermeer® compatible Sub Saver (1703-604-03, page 31).


Convert your Ditch Witch® rig to run 1-piece forged drill pipe. StraightLine HDD® conversion solutions will extend the life of your drill pipe and lower your operating costs.


CONVERSION SOLUTIONSDITCH WITCH® TO VERMEER® STARTER RODS


Add flexibility to your rig with Ditch Witch® compatible starter rods. StraightLine HDD® starter rods provide a safe and convenient non-torqued crossover connection from Ditch Witch® drill pipe to Vermeer® down-hole tools and DCI transmitters.

Starter rods are available for: JT520, JT920, JT920L, JT1720, JT2020M1, JT2720/M1 & JT4020.


1704-305-01 JT520 Pin x Vermeer® 1.625" LP QC Box (JT520) 11.9 lbs. $249.00

1704-352-01 JT9 Coarse Pin x 1 5/8" LP QC Box (JT922/JT9/JT10) 19 lbs. $395.00

1704-301-01 JT920 Pin x Vermeer® 1.625" LP QC Box (JT920/JT920L) 12 lbs. $249.00

1704-345-01 JT1220M1 Pin x Vermeer® 2.125" LP QC Box (JT1220) 22 lbs. $295.00


1704-309-01 JT2020M1 Pin x Vermeer® 2.125" LP QC Box (JT2020M1) 23 lbs. $309.00

1704-303-01 JT2720 Pin x Vermeer® 2.125" LP QC Box (JT2720) 23 lbs. $309.00

1704-307-01 JT2720M1 Pin x Vermeer® 2.125" LP QC Box (JT2720M1/JT3020M1) 29.2 lbs. $395.00


GREAT

VALUE


DITCH WITCH® COMPATIBLECONVERSION SOLUTIONSVERMEER® TO DITCH WITCH® CROSSOVER RODS

StraightLine HDD® crossover rods give Ditch Witch® drill operators a non-torqued, Vermeer® to Ditch Witch® crossover connection.


1704-805-01 Crossover Rod, 1.66" FS200 Box x 1.625" EZ2 Pin 18 lbs. $495.00

1704-330-03 Crossover Rod, 1.66" FS200 Pin x 1.625" EZ2 Pin 15 lbs. $449.00

1704-334-01 Crossover Rod, 1.90" FS250 Box x 1.875" EZ3 Pin 29 lbs. $549.00



1704-348-01 Crossover Rod, 1.90" FS250 Pin x 2.125" LP Box 20 lbs. $449.00

1704-346-01 Crossover Rod, 2.06" FS400 Pin x 1.87" EZ3 Pin 25 lbs $549.00


1704-347-01 Crossover Rod, 2.06" FS400 Pin x 2.125" LP Box 22 lbs $499.00


1704-330-10 Crossover Rod, 2.375" FS600 Pin x 2.00" EZ2 Pin 34 lbs $499.00

1704-616-01 Crossover Rod, 2.375" FS600 Pin x 2.125" LP QC Box 32 lbs. $599.00



“I use StraightLine because their people are the most knowledgeable

in the industry. I call them direct and it’s a

very short conversation and I have my product.“

Ben Bosnell, Bosnell Excavation

Lusk, Wyoming


DITCH WITCH® COMPATIBLE DRILL PIPE


1103-021 Drill Pipe, Forged, 1.125" x 4.9' (JT520) 16 lbs. CALL

1103-023 Drill Pipe, Forged, 1.125" x 4.9' (JT5) (Coarse) 16 lbs. CALL

1103-003 Drill Pipe, Forged, 1.580" x 6.5' (JT920/JT921S) 28 lbs. CALL

1103-024 Drill pipe, Forged, 1.580" x 6' (JT9/JT922) 26 lbs. CALL

1103-004 Drill Pipe, Forged, 1.580" x 10' (JT920L) 37 lbs. CALL

1103-025 Drill Pipe, Forged, 1.820" x 10' (JT12/JT1220M1) 59 lbs. CALL



1103-028 Drill Pipe, Forged, 2.375" x 9.8' (JT25/JT30/JT2720M1/JT28) 77 lbs. CALL


1103-030 Drill Pipe, Forged, 2.375" x 9.8' (JT2720M1/JT3020M1) 90 lbs. CALL


1103-032 Drill Pipe, Forged, 2.875" x 14.75' (JT4020M1) 176 lbs. CALL

1103-033 Drill Pipe, Forged, 3.50" x 14.75' (JT7020M1/JT8020M1/JT100) 225 lbs. CALL


DRILL PIPE - STRAIGHTLINE HDD® VERMEER® COMPATIBLE

StraightLine HDD drill pipe is produced with the same quality and Ready-To-Work standards that go into every tool and rig we offer. This pipe is engineered to be the longest-lasting, toughest pipe on the market today. Our manufacturing technologies and inventory depth allow this product to be offered at industry leading prices.


SEE PAGE

84


1101-018 Drill Pipe, Forged, 1.315” FS200 x 6’, 6x6 (Six Shooter) 18 lbs. CALL

1101-042 Drill Pipe, 1.660" FS200 x 6 ft., 7x11/9x13, StraightLine 26 lbs. CALL



1101-028 Drill Pipe, 2.375" FS600 x 10 ft., 24x40, StraightLine 73 lbs. CALL

1101-045 Drill Pipe, 2.375” FS650 x 10 ft., D33x44/D36x50 StraightLine 83 lbs. CALL




1101-049 Drill Pipe, 2.875” FS900 x 15ft., 50x100/60x90, StraightLine 171 lbs. CALL

1101-050 Drill Pipe, 3.50” FS800 x 15ft., 50x100/80x100, StraightLine 210 lbs. CALL




1101-017 Forged, 2.063" HIWS2 x 10', D24x33 Compatible 63 lbs. CALL

1101-012 Forged, 2.375" HIWS2 x 10', D33x44/D36x50 Compatible 81 lbs. CALL





FIRESTICK® 2

800.654.3484

DRILL PIPE - HUNTING®VERMEER® COMPATIBLE


DRIVE CHUCKS VERMEER® COMPATIBLE

StraightLine HDD® drive chucks are precision machined using 4145 heat-treated materials for Vermeer® drills. Available in Firestick® 1, 2 and 650/700/1000 connections for Vermeer® drills from D6x6 through D100x140.


1703-601-01 Drive Chuck (fits D7x11, 1.66" FS1) 5.58 lbs. $199.00






1703-618-01 Drive Chuck (fits D24x33, 2.06" FS2) 12 lbs CALL


1703-604-01 Drive Chuck (fits D24x40/D40x40, 2.375" FS1) 15.33 lbs $349.00

1703-615-01 Drive Chuck (fits D33x44/D36x50, FS650) 14.5 lbs. $409.00

1703-619-01 Drive Chuck (fits D33x44/D36x50, 2.375" FS2) 14.5 lbs. $409.00

1703-616-01 Drive Chuck (fits D33x44/D36x50, 2.625" FS700) 15 lbs. $409.00


1703-607-01 Drive Chuck (fits D50x100/D80x100, 3.5" FS1) 35.4 lbs. $689.00

1703-621-01 Drive Chuck (fits D100x120, 3.50" FS2) 45 lbs. $999.00

1703-617-01 Drive Chuck (fits D100x120/D100x140, 3.50" FS1000 pipe) 50 lbs. $799.00


TURN IDLED EQUIPMENT

INTO

C A S HCall

888-311-3869 or go to

sourcehdd.com to get started.

Tip: The sub-saver is subjected to tremendous stress. Protect your bore from costly down-time by inspecting and replacing your sub-saver at the first sign of wear.

800.654.3484

Precision machined from 4145 heat-treated material, our sub-savers are incredibly durable. Available in Firestick® 1, 2 and 650/700/1000 connections for Vermeer® drills from D6x6 through D100x140.


1703-613-02 Sub-Saver (fits D6x6, 1.66" FS200, 8” STS Length) 6.0 lbs. $99.00

1703-601-02 Sub-Saver (fits D7x11/D7x11a/D10x15, 1.66" FS200, 6” STS Length) 3.88 lbs. $69.00

1703-601-03 Sub-Saver (fits D7x11 Series II/D9x13 Series II/Series 3, 1.66" FS200, 8” STS Length)

5.77 lbs. $89.00


1703-603-02 Sub-Saver (fits D16x20/D16x20a, 1.90" FS250, 5.5 STS Length) 4.69 lbs. $79.00

1703-603-03 Sub-Saver (fits D16x20 Series II/D20x22 Series 3, 1.90" FS250, 10.151” STS Length)

10.10 lbs. $169.00

1703-609-02 Sub-Saver (fits D18x22/D20x22, 1.90" FS250, 3.95” STS Length) 3.34 lbs. $99.00

1703-610-02 Sub-Saver (fits D20x22/D24X26, 2.06" FS400, 10.14” STS Length) 6.38 lbs. $99.00

1703-610-03 Sub-Saver (fits D20x22 Series II, 2.06" FS400, 10.17” STS Length) 12.23 lbs. $149.00

1703-622-02 Sub-Saver (fits D23x30 Series 3, 2.375” FS 600, 10.188” STS length) 14.22 lbs. $149.00


1-PIECE SUB-SAVERS VERMEER® COMPATIBLE



1703-604-02 Sub-Saver (fits D24x40, 2.375" FS600, 5.5” STS Length) 7.3 lbs. $109.00

1703-604-03 Sub-Saver (fits D24x40A, 2.375" FS600, 7” STS Length) 9.39 lbs. $109.00

1703-623-02 Sub Saver, (fits D24x40, Series 3, 2.375” FS600, 10” STS Length) 13.83 lbs. $149.00

1703-611-02 Sub-Saver (fits D24x40 Series II/D24x40 Series 3, 2.375" FS600, 9.5” STS Length)

16 lbs. $149.00

1703-615-03 Sub-Saver (fits D33x44/D36x50 Series II, 2.375" FS650, 8" STS Length) 14 lbs. $239.00

1703-616-03 Sub-Saver (fits D33x44/D36x50, 2.625" FS700, 8" STS Length) 9.5 lbs. $239.00

1703-619-02 Sub-Saver (fits D33x44/D36x50, 2.625" FS700, 5.375” STS Length) 13 lbs. $289.00

1703-625-02 Sub Saver, (fits D40x55 Series 3, 2.625” FS700, 9” STS Length) 16.62 lbs. $249.00

1703-606-02 Sub-Saver (fits D50x100/D60x90, 2.875" FS900, 8” STS Length) 16.67 lbs. $289.00

1703-607-02 Sub-Saver (fits D50x100/D80x100, 3.5" FS800, 8" STS length) 19.43 lbs. $289.00

1703-626-02 Sub Saver, (fits D60x90/D60x90 S3, 2.875” FS900 8.7” STS Length) 18 lbs. $349.00

1703-626-03 Sub Saver, (fits D60x90, 3.5” FS800, 8.7” STS Length) 21.73 lbs $349.00

1703-607-03 Sub-Saver (fits D80x100 Series II, 3.5" FS800, 8.7" STS Length) 19.43 lbs. $349.00

1703-621-02 Sub-Saver (fits D100x120, 3.5" F1000, 7” STS Length) 19.10 lbs. $469.00

1703-617-02 Sub-Saver (fits D100x120/D100x140, 3.5" FS1000, 7” STS Length) 16 lbs. $329.00



SEE PAGE

85


STARTER RODS VERMEER® COMPATIBLE

Precision machined from tough 4145 heat-treated alloy steel, our Vermeer® compatible starter rods are available in Firestick® 1 & 2 connections for Vermeer® drills from D6x6 through D36x50 Series II.


SEE PAGE

84


1704-601-01 D7x11/D9x13/D10x15 (1.66" FS200) 12 lbs. $199.00

1704-602-01 D16x20/D18x22 (1.90" FS250) 17.1 lbs. $209.00

1704-608-01 D18x22/D20x22/D24x26 (2.06" FS400) 22 lbs. $219.00

1704-612-01 D24x33 (2.06" FS2) 23 lbs. CALL

1704-603-02 D24x40 (2.375" FS600) Standard Length 23.3 lbs. $209.00

1704-603-01 D23x30/D24x40 (2.375" FS600) Deluxe Length 30 lbs. $259.00

1704-614-01 D36x50 (2.375" FS650) 24 lbs. $259.00

1704-615-01 D36x50 (2.625" FS700) 22.45 lbs. $269.00

1704-609-01 D33x44/D36x50 (2.375” FS2) 24 lbs. $429.00


1704-618-01 D7x11/D9x13/D10x15 (1.66” FS200 Box x Quickfire 300 Box) 12 lbs $260.00

1704-619-01 D16x20/D18x22 (1.90” FS250 Box x Quickfire 400 Box) 20.45 lbs. $285.00

1704-620-01 D18x22/D20x22 (2.06” FS400 Box x Quickfire 400 Box) 22.28 lbs. $285.00

1704-621-01 D23x30/D24x40 (2 3/8” FS600 Box x Quickfire 400 Box) 26.45 lbs. $285.00

1704-622-01 D23x30/D24x40 (2 3/8” FS600 Box x Quickfire 460 Box) 28 lbs. $500.00

1704-623-01 D36x50 (2 3/8” FS650 Box x Quickfire 460 Box) 38 lbs. $500.00

1704-624-01 D36x50 (2 5/8” FS700 Box x Quickfire 460 Box) 39.25 lbs. $500.00


HEX COLLARSVERMEER® COMPATIBLE


1704-604-01 Hex Collar, D7x11/D10x15 3.7 lbs. $48.00

1704-605-01 Hex Collar, D7x11/D10x15 (Hard-Faced) 3.45 lbs. $69.00

1704-606-01 Hex Collar, D16x20/D24x40/D36x50 7.1 lbs. $89.00

1704-607-01 Hex Collar, D16x20/D24x40/D36x50 (Hard-Faced) 7.5 lbs. $109.00

1704-607-02 Hex Collar, D16x20/D24x40/D36x50 (Carbide stud) 8.4 lbs. $149.00

1704-607-03 Hex Collar, 2.5”, D16x20/D24x40 (Hard-Faced & Teeth) 8 lbs. $169.00


1704-625-01 Hex Collar, Quickfire 300 (Hard-Faced) 2.5 lbs. $130.00



1704-626-01 Hex Collar, Quickfire 300 (Hard-Faced & Carbide Teeth) 2.75 lbs. $150.00

1704-626-02 Hex Collar, Quickfire 400 (Hard-Faced & Carbide Teeth) 8.2 lbs. $165.00

1704-626-03 Hex Collar, Quickfire 460 (Hard-Faced & Carbide Teeth) 9 lbs. $195.00

When installed over the flats on starter rods, StraightLine HDD® hard-faced collars prevent thread over-torquing, while maximizing durability and wear resistance.




1201-101-08 2", DS, JT520 Box x DW, 3-Bolt Pattern, Includes Digitrak® Blocks & Nose Piece

43 lbs. $895.00

1201-201-17 2 3/4", Small Bolt Pattern (2.00” IF Box) 32.2 lbs. $639.00

1201-201-10 3", Small Bolt Pattern (2.375" FS600 Box) 43.2 lbs. $729.00

1201-201-09 3 1/4", Small Bolt Pattern (2.375" REG Box) 54 lbs. $899.00

1201-201-12 3 5/8", Large Bolt Pattern (3.5" FS800 Box) 68 lbs. $1,059.00

1201-201-14 4 1/8", Large Bolt Pattern, 2-Cell (2.875" IF Box) 90.6 lbs. $1,899.00

1201-201-15 4 1/8", Large Bolt Pattern, 4-Cell (2.875" IF Box) 107.55 lbs. $2,699.00

1201-201-16 4 3/4", Large Bolt Pattern, 2- or 4-Cell (3.5" IF Box) 128 lbs. $3,495.00

Consisting of a housing body, jet and optional tail piece, our Vermeer® compatible housings offer enhanced service life over OEM and other aftermarket housings. Available in 2 3/4-, 3-, 3 1/4-, 3 5/8- & 4 1/8-inch OD, all StraightLine HDD® housings will accept 2-cell DCI transmitters. The 4 1/8-4 3/4 inch housing is designed to accept either the 2- or 4-cell transmitter. Available for all drills, from D6x6 to D100x140.

VERMEER® COMPATIBLETRANSMITTER HOUSINGS

HOUSING JETSPART # DESCRIPTION WEIGHT PRICE



1201-202-12 Housing Jet, 3/8" hole (fits 3 5/8" - 4 3/4" Housing) 1.1 lbs. $60.00

ARMADRILLCO HOUSINGS

DRILLHEADS V I S I Tstraightlinehdd.com/armadrillco


VERMEER® COMPATIBLE (TAIL PIECES) HOUSING SAVERS


AD237VP162LP Adapter, 2.375" FS600 Pin x 1.625" LP QC Pin 7 lbs. $150.00

AD237VP212LP Adapter, 2.375" FS600 Pin x 2.125" LP QC Pin 10 lbs. $150.00

AD237REGP237FS2B Adapter, 2.375" REG Pin x 2.375" FS2 Box 16 lbs. $495.00

AD237REGP212LP Adapter, 2.375" REG Pin x 2.125" LP QC Pin 11.3 lbs. $195.00

AD200IFP300QFP Adapter, 2.00” IF Pin x QuickFire 300 Pin 9.4 lbs. $225.00

AD200IFP400QFP Adapter, 2.00” IF Pin x QuickFire 400 Pin 15.55 lbs. $335.00

AD237REGP300QFP Adapter, 2.375” REG Pin x QuickFire 400 Pin 15.7 lbs. $275.00



AD287REGP460QFP Adapter, 2.875” Reg Pin x QuickFire 460 Pin 22.60 lbs. $335.00


VERMEER® COMPATIBLEBITS

All of our Vermeer® Compatible bits feature: •Carbide hard-facing protects the entire bit perimeter.•4140 heat-treated steel plate insures long service life.•Low-cost/long-life delivers an extremely favorable cost per-foot operation.

Every StraightLine HDD® bit is designed to deliver outstanding service life and excellent penetration over multiple bores. Available in many styles and sizes, our bits bolt directly on all Vermeer® compatible transmitter housings.

Best Good Fair Less Recommended Not RecommendedLegend -

SANDY SOFT SOFTMEDIUM MEDIUMHARD HARD

SOILS

HARD FACE

FANG

CHEVRON

SABRE

RAPTOR

THRASHER

bit selection guideROCK


FANG BITS The steep tapered Fang bit delivers excellent penetration in tough formations. The bit’s reduced surface area dramatically enhances steering performance.

Fang bits perform well in: sand and sandy loams.

HARD-FACED BITSHard-Faced bits feature generous carbide hard-facing that’s extremely resistant to abrasive conditions.

Hard-Faced bits perform well in: alluvial, clay, sands, small aggregates and gravel.


1301-423-02 Hard-Faced, 3 1/2" 6.44 lbs. $109.00

1301-423-03 Hard-Faced, 4" 7.44 lbs. $119.00

1301-423-04 Hard-Faced, 4 1/2" 8.5 lbs. $129.00

1301-423-05 Hard-Faced, 5" 9.49 lbs. $139.00

HARD-FACED, SMALL BOLT PATTERN


1301-434-02 Hard-Faced, 5" 14.8 lbs. $169.00

1301-434-04 Hard-Faced, 6" 17.25 lbs. $189.00

HARD-FACED, LARGE BOLT PATTERNPART # DESCRIPTION WEIGHT PRICE

1301-437-01 Fang, 5" 15.2 lbs. $169.00

1301-437-03 Fang, 6" 19.5 lbs. $199.00

FANG, LARGE BOLT PATTERN


1301-427-03 Fang, 4" 7.8 lbs. $159.00

1301-427-04 Fang, 4 1/2" 8.9 lbs. $169.00

FANG, SMALL BOLT PATTERN

Tip: As a rule of thumb, larger bits perform better in softer soils (sands, loams, sticky clays), while smaller bits perform better in hard soils (i.e. hardpan, shales, caliche, etc).


BITS VERMEER® COMPATIBLE

CHEVRON BITS The Chevron features a split-face design, coupled with angular tungsten-carbide cutting surfaces. The result is a bit with excellent steering response —even in tough soil conditions.

Chevron bits perform well in: sand, sandy loams and shale.

SABRE BITS The Sabre was developed as a result of customer requests for a bit with aggressive carbide cutting edges located to insure maximum cutting within the body of the bit. The result is a bit that engages tough pan soil, while maximizing steering in cobble.

Sabre bits perform well in: hardpan or cobble.


1301-429-01 Chevron, 3 1/2" 6.0 lbs. $189.00

1301-429-02 Chevron, 4” 6.95 lbs. $199.00

1301-429-03 Chevron, 4 1/2" 7.9 lbs. $209.00

CHEVRON, SMALL BOLT PATTERNPART # DESCRIPTION WEIGHT PRICE

1301-439-01 Sabre, 4" 8 lbs. $349.00

SABRE, SMALL BOLT PATTERN


1301-439-03 Sabre, 5" 11 lbs. $399.00

1301-439-02 Sabre, 6" 19 lbs. $419.00

SABRE, LARGE BOLT PATTERN


1301-436-01 Chevron, 5" 14.2 lbs. $219.00

1301-436-03 Chevron, 6" 15.85 lbs. $239.00

CHEVRON, LARGE BOLT PATTERN


RAPTOR BITS The Raptor is an aggressive design featuring carbide buttons lining the entire perimeter. The bit’s angled face eliminates the tendency to

“snag” rock outcroppings and improves cutting action in tough conditions.

Raptor bits perform well in: tough aggregate conditions.

THRASHER BITSAn aggressive design, the Thrasher features a series of aggressive conical tungsten carbide cutters. The result is an aggressive, long lasting bit that delivers good results in tough conditions.

Thrasher bits perform well in: hardpan, shale, caliche and sandstone formations.


1301-430-02 Raptor, 3 1/2" 8.3 lbs. $229.00

1301-430-03 Raptor, 4" 9.55 lbs. $239.00

1301-430-04 Raptor, 4 1/2" 10.9 lbs. $249.00

1301-430-05 Raptor, 5" 12.05 lbs. $309.00

RAPTOR, SMALL BOLT PATTERN


1301-438-01 Raptor, 5" 19.25 lbs. $279.00

1301-438-03 Raptor, 6" 23.25 lbs. $309.00

RAPTOR, LARGE BOLT PATTERN


1301-425-01 Thrasher, 3 1/2" 7.15 lbs. $189.00

1301-425-02 Thrasher, 4" 8.06 lbs. $199.00

1301-425-03 Thrasher, 4 1/2" 9.1 lbs. $209.00

THRASHER, SMALL BOLT PATTERN


1301-433-01 Thrasher, 5" 15.25 lbs. $229.00

1301-433-03 Thrasher, 6" 19 lbs. $249.00

THRASHER, LARGE BOLT PATTERN

StraightLine HDD® manufactures a complete line of pipe racks for all Vermeer® drills. Each rack is engineered to exacting standards and is the perfect solution for anyone looking to add a spare or replace a damaged pipe rack.


PIPE RACKS VERMEER® COMPATIBLE

Tip: We are constantly updating and adding to our list of pipe racks. If you don’t see your rig on the table, call us at 800.654.3484.

“One of the biggest advantages in working with Source: HDD and

StraightLine is the value they bring in,

reducing the capital equipment costs.”

Frank Chambers, Kemp Construction

Derby, KS


PART # DESCRIPTION WEIGHT PRICE1901-102-01 Holds 44 pieces (fits D10x15) 325 lbs. $1,495.00

1901-102-02 Holds 40 pieces (fits D16x20) 510 lbs. $1,495.00

1901-102-14 Holds 50 pieces (fits D20x22) 490 lbs. $2,395.00

1901-102-22 Holds 40 pieces (D20x22 Series II) (fits 2.06” FS1) 376 lbs. $3,400.00

1901-102-03 Holds 20 pieces (fits D24x40 Half Rack) 320 lbs. $1,195.00

1901-102-09 Holds 50 pieces (D24x40A Full Rack) 660 lbs. $3,695.00

1901-102-15 Holds 50 pieces (fits D24x40 Series II) 515 lbs. $2,995.00

1901-102-10 Holds 60 pieces (fits D33x44,10') 585 lbs. $2,995.00

1901-102-05 Holds 20 pieces (fits D33x44 Half Rack, 15') 510 lbs. $2,295.00

1901-102-04 Holds 40 pieces (fits D33x44, 15') 680 lbs. $2,595.00

1901-102-16 Holds 40 pieces (fits D36x50 Series II, 15') (fits FS700) 700 lbs. $3,295.00

1901-102-19 (fits D36x50 Series II, 15’) (fits FS2) 633 lbs. $3,695.00

1901-102-20 (fits D36x50 DR, 10’) (fits FS700) 1,047 lbs. $3,995.00

1901-102-08 Holds 40 pieces (fits D40x40) 858 lbs. CALL

1901-102-23 Holds 30 pieces (D60x90) (fits 2. 7/8” FS1) 1,125 lbs. $3,900.00

1901-102-07 Holds 9 pieces (fits D50x100/D80x100 Half Rack) 535 lbs. $2,295.00

1901-102-06 Holds 21, 2 7/8" (FS900) or 18, 3 1/2" (FS800) pieces (fits D50x100/D80x100)

585 lbs. $2,595.00

1901-102-11 Holds 24 pieces (D80x100 Series II) 845 lbs. $3,695.00

1901-102-12 Holds 9 pieces (D100x120 Half Rack) (fits FS2) 645 lbs. $3,995.00

1901-102-13 Holds 15 pieces (D100x120 Full Rack) (fits FS2) 690 lbs. $4,495.00

1901-102-21 Holds 9 pieces (D100x140) (fits FS1000) 918 lbs. $3,995.00


SWIVELS STRAIGHTLINE HDD®

For over 25 years, StraightLine HDD swivels have established a proven track record for performance and reliability in the harshest underground environments. At the heart of the design is a highly engineered "angular contact" bearing system that easily handles extreme thrust and radial loads. The bearings are then "stacked" to exceed the highest load levels. To prevent soil and drilling fluid intrusion, the sealing system features one shaft seal and two lip seals with steel reinforcing rings.


1501-300-05 Clevis x Clevis, 2 1/4" OD, 5-ton 7.5 lbs. $395.00

1501-300-16 Clevis x Clevis, 3 3/4" OD, 10-ton 28 lbs. $895.00

1501-300-01 Clevis x Clevis, 4 1/2" OD, 15-ton 43 lbs. $995.00

1501-300-06 Clevis x Clevis, 5 1/2" OD, 20-ton 68 lbs. $1,495.00

1501-300-07 Clevis x Clevis, 6" OD, 30-ton 90 lbs. $1,795.00

1501-300-02 Clevis x Clevis, 7 1/2" OD, 45-ton 185 lbs. $2,795.00

1501-300-03 2.875" IF BOX x Clevis, 7 1/2" OD, 45-ton 189 lbs. $2,795.00

1501-300-04 3.50" IF BOX x Clevis, 7 1/2" OD, 45-ton 194 lbs. $2,795.00

1501-300-17 Clevis x Clevis, 10" OD, 60-ton 345 lbs. $6,199.00

1501-300-09 4.50" IF BOX x Clevis, 10" OD, 60-ton 365 lbs. $5,399.00

REBUILD A SWIVEL V I S I T

youtube.com/straightlinehdd



At StraightLine HDD, we have the ability to cut over 50,000 custom adapters. From Pin-to-Box and Box-to-Box, to Pin-to-Pin, there’s not a thread on the planet we can’t adapt. Most adapters are in stock and ready to ship within 24-hours. And if it’s something we don’t stock, we’ll cut a custom adapter and get you back to work in record time.

From DW520 to 6 5/8-inches full hole, StraightLine HDD has an adapter solution to fit your needs.

ADAPTING FROM TOOL-TO-TOOL MADE SIMPLE.

ADAPTERS STRAIGHTLINE HDD®

HEAT-TREATED ALLOY STEEL

PRECISION MACHINEDOver 74 thread choices.

ADAPTERS V I S I Tyoutube.com/straightlinehdd


BOX x BOX TRANSMITTER HOUSINGSSTRAIGHTLINE HDD®

StraightLine HDD Box x Box transmitter housings are precision machined from 4145 heat-treated material for durability and are specifically designed to accommodate a wide range of screw-on bit styles, shown below.

THESE HOUSINGS ALSO FEATURE:•Two 3/8-inch fluid ports insure excellent mud flow and transmitter cooling.•Ability to accept any transmitter or beacon, 2- or 4-cell, which allows quick and simple bit changes to accommodate varying soil conditions.

•24-position mechanical timing mechanism.•Available for Digitrak® and Subsite®.

SCREW-ON BITS TYPICALLY USED WITH THIS STYLE OF TRANSMITTER HOUSING


1201-401-05 Side Load, 2 3/4", 2" IF Box (Fwd) x 2" IF Box, DCI® 45 lbs. $1,199.00

1201-401-06 Side Load, 2 3/4", 2" IF Box (Fwd) x 2" IF Box, Subsite® 45 lbs $1,199.00

1201-401-01 Side Load, 3 1/4", 2" IF Box x 2 3/8" REG Box, DCI® 58 lbs. $1,099.00

1201-401-04 Side Load, 3 1/4", 2" IF Box x 2 3/8" REG Box, Subsite® 58 lbs. $1,099.00

1201-401-08 Side Load, 3 1/4", 2 3/8" REG Box x 2 3/8" REG Box, DCI® 58 lbs. $1,099.00

1201-401-09 Side Load, 3 1/4", 2 3/8" REG Box x 2 3/8" REG Box, Subsite® 58 lbs. $1,099.00

1201-401-10 Side Load, 3 1/2", 2 3/8" REG Box x 2 3/8" REG Box, DCI® 2/4, 68 lbs. $1,399.00

1201-401-11 Side Load, 3 1/2", 2 3/8" REG Box x 2 3/8" REG Box, Subsite® 68 lbs $1,399.00

1201-401-07 Side Load, 4 1/2", 2 7/8" IF Box x 2 7/8" REG Box 117 lbs. $2,299.00


The StraightLine HDD 4th generation drill head is precision machined from 4145 heat-treated material and is available in 2.5- and 2.75-inch OD. The heat-treated nose piece is available in a variety of nozzle sizes and is designed 1/8-inch larger than the housing body, which significantly reduces housing wear. Our housings accept 2-cell DCI®, Spot-D-Tek® and Radiodetection® transmitters.

THE PATENTED CENTERLINE CUTTING DESIGN OF THE 4TH GENERATION DRILL HEAD DELIVERS THESE BENEFITS:•Reduces the torque required to obtain efficient cutting.•Efficient cutting improves the performance of all machines, regardless of size.

•Drills straighter and improves on-grade performance. •Unlike a duck bill design, the 4th Generation assembly doesn’t lose its steer when drilling out of a steer.

Putting it all together, the 4th Generation drill head will travel straighter and drill faster, while placing less stress on the drill and drill pipe.

4TH GENERATION TRANSMITTER HOUSING STRAIGHTLINE HDD®


1201-301-01 Transmitter Housing, 2 1/2" 15.4 lbs. $925.00

1201-301-02 Transmitter Housing, 2 3/4" 25.1 lbs. $1,250.00

Steering Shoe, Nose Piece and Bit sold separately.


NOSE PIECESSTRAIGHTLINE HDD®


236-5807-04 Nose Piece, 2 Holes x .094 (fits 2 1/2" Housing) 0.25 lbs. $60.00


180126 Nose Piece, 2 Holes x .094, (fits 2 3/4" Housing) 0.35 lbs. $60.00

180227 Nose Piece, 2 Holes x .125, (fits 2 3/4" Housing) 0.35 lbs. $60.00






STRAIGHTLINE HDD®STEERING SHOES & BITS


236-8840-04 Steering Shoe, 3" (fits 2 1/2" housing) 4.7 lbs. $155.00

236-9025-04 Steering Shoe, 3 1/2" (fits 2 1/2" housing) 5.65 lbs. $165.00

361587 Steering Shoe, 3" (fits 2 3/4" housing) 7.4 lbs. $225.00

361314 Steering Shoe, 3 1/2" (fits 2 3/4" housing) 8.5 lbs. $230.00

236-6438-04 Steering Shoe, 3 1/2" (fits 3 1/4" housing) 7.1 lbs. $235.00



362215 Steering Shoe, 4 1/2" (fits 3 3/4" housing) 15.3 lbs. $325.00

TUFF BITThe Tuff Bit is constructed from S7 tool steel to provide the maximum service life in the most abrasive conditions. From concrete to sand, the Tuff Bit will stand up to its name.

Tuff bits perform well in: tough abrasive conditions.

STEERING SHOEThe StraightLine HDD 4th Generation Housing accomplishes precise steering by the long taper, bolt-on steering shoe. The shoe is engineered to match the bit size and housing diameter, yielding superior grade control. 4140 heat-treated material steel construction insures long service life.

800.654.3484


260631 Tuff, 3 1/2" 2.85 lbs. $150.00

360611 Tuff, 4" 3.65 lbs. $150.00

262101 Tuff, 4 1/2" 4.80 lbs. $155.00


BENT BITThe 4th generation Bent Bit allows for faster steering than its straight counterparts. 4140 heat-treated material steel construction insures long service life.

Bent bits perform well in: alluvial, clay, sands and gravel conditions.

STEPPED CARBIDE BITThe most aggressive bit in the 4th generation line-up, the design and opposing carbide cutter surfaces reduce torque requirements in tough conditions such as hard pan or caliche.

Stepped carbide bits perform well in: hard ground conditions.


360323 Bent, 3 1/2" 4.80 lbs. $150.00

262144 Bent, 4" 3.95 lbs. $160.00

362209 Bent, 4 1/2" 4.80 lbs. $175.00

362214 Bent, 5" 6.6 lbs. $160.00


236-8842-04 Stepped Carbide, 3" 1.95 lbs. $150.00

236-8841-04 Stepped Carbide, 3 1/2" 2.20 lbs. $155.00

236-4738-04 Stepped Carbide, 4" 2.60 lbs. $160.00

236-8507-04 Stepped Carbide, 4 1/2" 2.90 lbs. $165.00

362213 Stepped Carbide, 5" 3.2 lbs. $180.00


ROCKEYE® HAMMER SYSTEM STRAIGHTLINE HDD®

THE MOST VERSATILE ROCK TOOL YOU CAN OWN. The RockEye Hammer System has proven to be the most versatile boring tool in the industry, delivering incredible success in a wide variety of ground conditions. The StraightLine RockEye Hammer System easily negotiates its way through any soil condition, including the hardest rock Mother Nature has to offer.

MINIMIZE YOUR ENVIRONMENTAL FOOTPRINT WHILE MAXIMIZING YOUR PROFITABILITY.Unlike many drilling methods that require a significant amount of drilling fluid, the RockEye Hammer System typically uses between 0.5 and 3 gallons of water per minute, resulting in less environmental impact and dramatically cleaner job sites.

HOW DOES THE ROCKEYE STEER?The convex side of the bent sub, working in conjunction with the attached bit, creates a precision two-point steering system. To steer the hammer it is rotated between two clock positions, as the assembly advances it reacts off of the front and rear steering points.

THE COMPLETE ASSEMBLY INCLUDESHousing, Shock Dampening Transmitter Assembly,

Portable Breakout Wrench Kit & Drill Pipe Adapter.

CAN I STEER IN NON-ROCK CONDITIONS?Yes. The procedure to steer in a compactible soil is exactly the same as steering in rock.

CAN I USE A HAMMER ON ANY DRILL RIG?Yes. The RockEye will turn any drill into a rock drill. It is as simple as connecting the air on the high pressure side of the mud pump to provide a path for the air supply to be directed into the drill rig’s drilling fluid course. The initial installation of the system takes approximately 30-minutes.

CAN MY TRANSMITTER SURVIVE THE POUNDING ACTION?The transmitter/beacon is placed in a sleeve-within-a-sleeve system. StraightLine has perfected a dampening system that virtually removes all shock from the transmitter.

“I can not imagine why anybody facing rock conditions wouldn’t

own a RockEye Hammer System.”

Dustin Walker, W&W Utility Construction

Peculiar, Missouri


G E T I N F O R M E DMORE ROCKEYE STORIES

VISIT OUR

BLOGstraightlinehdd.com/news


ROCKEYE® HAMMER SYSTEM STRAIGHTLINE HDD®

ROCKEYE DOWN-HOLE ASSEMBLYThe RockEye down-hole assembly includes the bit, hammer body, bent sub, side load transmitter housing with shock dampening system and the tail piece. The RockEye’s precision steering is accomplished by our two-point steering system. The bent sub and the toe of the bit are the essential pieces in the steering system. The hammer is rotated between two clock positions, the steering takes place by reacting off of the front and rear steering points. The RockEye bent sub is protected by carbide, this protection insures long service life and allows us to offer the only wear guarantee in the industry.

BENT SUB

Tip: The RockEye Hammer, depending on size, can be effective paired with compressors that can be rented for under $200 per day.


ROCKEYE 250-GALLON TANKDue to the minimal amount of drilling fluids that are needed in hammer operations, the 250-gallon tank is the optimum size. This tank allows for small batches of foam or polymers to be mixed for a full day’s worth of drilling.

ROCKEYE SUPPORT PACKThe RockEye support pack is central to the operation of the hammer system. The support pack provides the required lubrication and fluid to the down-hole hammer. This is accomplished with a positive displacement piston pump. The oil pump is adjustable so the operator can control the amount of lubrication being provided to the hammer. The fluid that is needed for the drilling operation is provided by a 5 GPM on board water pump. This system is controlled with a wireless remote or can also be controlled from the console of the support pack.

“The RockEye completely changed

the way we do directional boring. It

has proven to be a real money saving

tool for us.”

Bob Gump, CBC Pipeline, Inc.,

Goldonna, Louisiana


STRAIGHTLINE HDD®

DESCRIPTION AH3.0 AH4.0 AH5.0

Hammer Body Diameter 3.1" 3.625" 4.6"

Piston Weight 11.7 lbs. 20 lbs. 30 lbs.

Standard Bit 4.25" 4.75" 5.75"

Optional Bit n/a 5.125" 6"

Minimum Recommended Compressor Supply

375-cfm/150-psi 400-cfm/200-psi 700-cfm/300-psi

Maximum Recommended Tool Joint Diameter

2.75" 3.25" 4.5"

Typical Drill Rig Thrust/Pull 10,000-30,000 lbs. 10,000-50,000 lbs. 24,000-120,000 lbs.

IT’S VERSATILE. With three models ranging from 3- to 5-inches, the RockEye turns any rig—even those with as little as 10,000 pounds of thrust—into a rock hammering machine.

WITH FOUR MODELS, THERE’S A ROCKEYE HAMMER THAT FITS YOUR NEEDS


ROCKEYE® HAMMER SYSTEM

HERE'S WHAT YOU HAD TO SAY ABOUT THE ROCKEYE HAMMER SYSTEM

Industry Leading Pricing

“Our contracts don’t typically pay higher rates for extreme rock bores, so efficiency is a huge factor. We’ve only found one solution that makes sense in our rock bores: the RockEye hammer.”Ryan Sullivan, Lineal Contracting - Bedford, Indiana

“The RockEye Hammer System annihilated rock up here. It’s one of my better purchases in a long time. It really exceeded my expectations.”Glen Everson, Target Directional Drilling - Lee’s Summit, Missouri

“The StraightLine hammer hits extremely hard, exhibits unbelievable wear resistance and steers perfectly in any condition.”Robert Mendoza, RPM Construction - Hobbs, New Mexico

ROCKEYE HAMMER V I S I T



STRAIGHTLINE HDD®

It’s simple: successful HDD operators know reamer selection is often the difference between making–or losing–money. That’s where StraightLine HDD offers a clear advantage.

We were an early pioneer in HDD technology. Over the last 30 years we’ve learned a thing or two about what works. Every lesson we’ve learned over the years is incorporated into each of our four reamer designs:

•OPEN-BODY DESIGN: For non-compactible conditions including sands and gravels up to medium rock formations.

•CLOSED-BODY DESIGN: For compactible conditions including light aggregates.

•FLUTED-BODY DESIGN: For compactible conditions including heavy aggregates and intermittent solid conditions.

•HOLE-OPENER DESIGN: For solid formations from sandstone and coral to quartz and granite.

•Unique geometries which, by design, result in the lowest possible resistance and smooth cutting action.

•Precision placement of carbide teeth maximizes cutting performance and extends cutter life.

•Extensive use of replaceable fluid ports, constructed from hardened steel or carbide (depending on reamer style and shaft size), lowers torque by delivering superior fluid placement to the tool’s perimeter.

•Extensive use of carbide-impregnated hard-surfacing on all exposed edges provide superior wear characteristics.

THE RIGHT REAMER – AVAILABLE FOR EVERY DRILLStraightLine HDD reamers are available in diameters from 4- to 96-inches, on eight shaft sizes, ranging from 2- to 9 5/8-inches. Choose from 74 common HDD thread types, with new connections added as needed.

PROFITABLE SOLUTIONS IN ALL GROUND CONDITIONS

ALL OF OUR REAMERS SHARE THE FOLLOWING FEATURES:

REAMERS


If you face a unique challenge, StraightLine HDD maintains an experienced team of reamer design and fabrication experts, capable of responding to requests for custom reamer and hole-opener designs. Whatever the drill type or size, whatever the soil condition, the StraightLine HDD team can deliver a custom reamer solution to your job site in as little as two days.

STRAIGHTLINE HDD CUSTOM REAMERS: LEVERAGE OUR EXPERIENCE TO ENHANCE YOUR PROFITS

CUSTOM REAMERS V I S I T


“The used rigs and equipment work as

advertised. The tools stand up to the rock we are in. And, most

importantly, they (Source: HDD) listen

to us.”

Adam Towne, Owner

DBU Construction Chichester, NH


From used rigs to new tooling, the Source HDD/StraightLine HDD merger creates a complete HDD offering.

WHAT IS READY-TO-WORK?

To learn how Ready-To-Work works for you, visit readytoworkhdd.com today.


RHINO REAMER - Valued for its ability to cut, mix and pack in one easy pass. GROUND CONDITIONS: Loam, clay, hardpan and small aggregates.SHAFT SIZE: 2" - 4 ¼"SIZE RANGE: 6" - 20"

REPLACEABLE FLUID PORTS

CARBIDE CUTTERS

PACKING BELL

OPTIONAL BUILT-IN SWIVEL

Located on the taper portion of the body ensures efficient fluid mixing.

Located on the tapered portion of the body, three rows of aggressive cutters deliver excellent cutting action and long tool life.

The unique geometry of the packing bell efficiently packs cuttings and facilitates utility installation.

The optional built-in swivel reduces the tool’s overall length and keeps the tool in place when pushing backwards.


REAMERS STRAIGHTLINE HDD®

WINGED REAMER - An open-bodied, double-slope design delivers high productivity with less stress. GROUND CONDITIONS: Non-compactible conditions including sand, aggregates, shale and limestone.SHAFT SIZE: 3" - 9 5/8"SIZE RANGE: 10" - 48"

DOUBLE SLOPE WING DESIGN

CARBIDE CUTTERS

OPEN-BODY DESIGN


HARD SURFACED WINGS

The double-slope wing design yields superior mixing and exceptional durability.

Aggressive carbide cutters, located along the leading edge of the wing, deliver aggressive cutting and extended tool life.

Open-bodied design cuts and mixes efficiently with low-mass/low-torque for less wear on drill and drill rod.

Located on the low pressure side of each wing, replaceable fluid ports presoak the oncoming cutter, which enhances fluid mixing.

Available in 3-, 4- 5- or 6-wing variations, each wing features extensive use of carbide hard-surfacing to extend tool life.


CARBIDE CUTTERS

COMPACT DESIGN

REDUNDANT CUTTERS

RADIAL FLOW REAMER - A compact, low-torque design that’s an effective choice for all sizes of rigs. GROUND CONDITIONS: Sand, loam, light aggregates and sandstone.SHAFT SIZE: 2" - 4 ¼"SIZE RANGE: 6" - 12"

Carbide cutters, placed on independent paths, engage the entire bore face.

Compact design makes it easy to install and remove in confined spaces.

Placement of redundant cutters on wing edges dramatically increases outer edge wear resistance.


SEE PAGE

84



HARD SURFACE WINGS

CARBIDE CUTTERS

OPEN-BODY DESIGNCENTRALIZING RING


FLY-CUTTER REAMER - A low-mass/low-torque solution with aggressive cutter design.GROUND CONDITIONS: Loam, light aggregates and shale.SHAFT SIZE: 3" - 9 5/8"SIZE RANGE: 12" - 54"

Available in 3-, 4- or 5-wing variations, each features extensive use of carbide hard-surfacing to extend tool life.

Located along the entire leading edge of each wing. Delivers aggressive cutting and extends service life.

Open-bodied design combines steep wing angles to make it a low-mass/low-torque tool that cuts smoothly and mixes efficiently.

Large, hard-surfaced centralized ring insures the tool runs true in the bore.


STEEP-TAPERED FLY CUTTER REAMER - A low-mass/low-torque solution with two rows of aggressive cutters and steeply-tapered wings ideally suited for hard ground and with larger rigs.GROUND CONDITIONS: Loam, light aggregates, shale and limestone.SHAFT SIZE: 3" - 9 5/8"SIZE RANGE: 12" - 54"


HARD SURFACE WINGS

CARBIDE CUTTERS

OPEN-BODY DESIGN

CENTRALIZING RING


Available in 3-, 4- or 5-wing variations, each features extensive use of carbide hard-surfacing to extend tool life.

Located along the entire leading edge of each wing. Delivers aggressive cutting and extends service life.

Open-bodied design combines steep wing angles to make it a low-mass/low-torque tool that cuts smoothly and mixes efficiently.

Large, hard-surfaced centralized ring insures the tool runs true in the bore.




CYCLONE REAMER - A low-torque tool that’s the undisputed choice for sticky clay or sand.GROUND CONDITIONS: Sand, loam and sticky clays.SHAFT SIZE: 2 ½" - 6 ½"SIZE RANGE: 8" - 24"

INDEPENDENT WING GROUPS

CONICAL CARBIDE TEETHSOIL SHEAR PASSAGES


STEEP WING ANGLES

Non-overlapping wing groups eliminate bit-balling and bridging.

Located along the entire leading edge of each wing. Delivers aggressive cutting and extended tool life.

Sheer passages provide additional sheering points and minimizes balling.

Perimeter located replaceable fluid ports deliver fluids exactly where it’s needed.

Steep, hard-surfaced wing angles easily shed sticky clay. 800.654.3484


CYCLONE-S REAMER - Steep paddle angles in a compact footprint, allow for large diameter tools.GROUND CONDITIONS: Sand, loam, clay and light aggregates.SHAFT SIZE: 3" - 9 5/8"SIZE RANGE: 14" - 48"

INDEPENDENT WING GROUPS

CONICAL CARBIDE TEETH

SOIL SHEAR PASSAGES


STEEP WING ANGLES

Non-overlapping wing groups eliminate bit-balling and bridging.

Located along the entire leading edge of each wing. Delivers aggressive cutting and extended tool life.

Sheer passages provide additional sheering points and minimizes balling.

Perimeter located replaceable fluid ports deliver fluids exactly where it’s needed.

Steep, hard-surfaced wing angles easily shed sticky clay.





HARD SURFACING

TAPERED SPIRAL BODY

TANG, PIN OR OPTIONAL BUILT-IN SWIVEL

TRI-ACTION REAMER - This long, tapered body, cuts, pulverizes and packs cuttings in a variety of conditions. GROUND CONDITIONS: Loam, clay, hardpan, aggregates and rock formations up to 15,000 PSI.SHAFT SIZE: 3" - 4 ¼"SIZE RANGE: 6", 8" & 10"

Located on the taper portion of the body ensures efficient fluid mixing.

Aggressive conical carbide teeth deliver excellent cutting action and extend service life.

All leading edges are protected by carbide hard surfacing for maximum service life.

The long, tapered relief flutes allow easy passage of cuttings, small aggregates and fluids.

The optional built-in swivel reduces the tool’s overall length and keeps the tool in place when pushing backwards.


ALL-TERRAIN REAMER - Valued for its aggressive ability to cut, mix and pack in one easy pass. GROUND CONDITIONS: Clay, aggregate and rock formations up to 20,000+ PSI.SHAFT SIZE: 2" - 9 5/8"SIZE RANGE: 8" - 48"


AGGRESSIVE SPIRAL FLUTES

FULLY-WELDED BODYAggressive conical carbide teeth deliver excellent cutting action and extended service life.

Spiraling flutes deliver smooth cutting action and provide an excellent channel for passage of cuttings and fluids.

Welded steel plate construction provides unequaled service life.

REPLACEABLE FLUID PORTSLocated on the taper portion of the body ensures efficient fluid mixing.

OPTIONAL BUILT-IN SWIVELThe optional built-in swivel reduces the tool’s overall length and keeps the tool in place when pushing backwards.




MIXING PADDLES

Located on the face of the reamer optimizes fluid placement.

The mixing paddles overcut the body,and facilitate fluid movement.

HURRICANE REAMER - A versatile all-in-one tool that cuts, mixes and packs. GROUND CONDITIONS: Sand, loam and clay.SHAFT SIZE: 2" - 4 ¼" SIZE RANGE: 6" - 20"

CARBIDE CUTTERSLead-in carbide cutters, placed on independent paths, engage the entire bore face.

OPTIONAL BUILT-IN SWIVELThe optional built-in swivel reduces the tool’s overall length and keeps the tool in place when pushing backwards.

HARD SURFACINGAll leading edges are protected by carbide hard surfacing for maximum service life.

PACKING BELLThe unique geometry of the packing bell efficiently packs cuttings and facilitates utility installation.


CRUSHER REAMER - The solid body design and carbide placement has proven to be a perfect match for diameters that are too small for a hole opener. GROUND CONDITIONS: Hardpan, cobble and rock formations to 25,000 PSI.SHAFT SIZE: 3" - 4 3/4"SIZE RANGE: 4" - 10"


SEE PAGE

84

CARBIDE CHOICE

SOLID BODY

PRESSED BUTTONS Choose a short round carbide for hard rock conditions or a chisel top for softer formations.

One piece solid body design maximizes performance and tool life.

Carbide in independent cutting paths.

REPLACEABLE FLUID PORTSPerimeter located replaceable fluid ports deliver fluids exactly where it’s needed.

TAPERED BODY ANGLETransitions to the full diameter in rear section of the tool for stabilization in the hole.



REVERSE RADIAL FLOW REAMER - The toughest, open body, bi-directional design available anywhere. GROUND CONDITIONS: Loams, moderate aggregates, clay, shale and light rock formations.SHAFT SIZE: 4" - 9 5/8"SIZE RANGE: 16" - 72"

OPEN BODY DESIGN


CENTRALIZED WING


Open-bodied design yields smooth cutting and excellent mixing in a low-mass/low-torque design.

Aggressive conical carbide teeth deliver excellent cutting action and extend service life, in both pull and push-back.

Large hard-faced centralized ring insures the tool runs true in the bore.

Located on the low pressure side of each wing, replaceable fluid ports presoak the oncoming cutter, enhancing fluid mixing.


G E T I N F O R M E DMORE REAMER STORIES

VISIT OUR

BLOGstraightlinehdd.com/news



STANDARD BARREL REAMER - Stabilize the tunnel and eases utility installation.GROUND CONDITIONS: Sand, loam, clay and light aggregates.SHAFT SIZE: 3" - 5"SIZE RANGE: 12" - 30"

LONG FULL DIAMETER BODY


The long, full diameter body stabilizes and centers the reamer and utility in the hole during pullback.

Located on the face of the barrel optimizes mud flow and fluid placement.

CONICAL CARBIDE TEETHCarbide teeth, placed on independent paths, engage the entire bore face.


MAXI-BARREL REAMER - Stabilize the tunnel and eases utility installation.GROUND CONDITIONS: Loams, moderate aggregates, clay, shale and light rock formations.SHAFT SIZE: 4 ¼" - 9 5/8"SIZE RANGE: 24" - 96"


LONG FULL DIAMETER BODY


Aggressive conical carbide teeth placed to cut a hole slightly larger than the diameter of the barrel body.

The long, full diameter body stabilizes and centers the reamer and utility in the hole during pullback.

Located on the face of the barrel optimizes mud flow and fluid placement.


SEE PAGE

84




REPLACEABLE FLUID PORTSCENTRALIZING RING

SEMI-OPEN BODY DESIGN

MAXI FLY-CUTTER REAMER - This tool is a three wing design featuring three large cutting surfaces and three equal-sized spoil passage areas. Constructed of ¾- or 1-inch plate (depending on tool size), welded to a 1-inch central ring, the Maxi-Fly is designed to handle the torque and pullback of today’s maxi-rigs.GROUND CONDITIONS: Loams, moderate aggregates, clay, shale and light rock formations.SHAFT SIZE: 4 1/8" - 9 5/8"SIZE RANGE: 24" - 96"

Located on three surfaces, aggressive replaceable conical carbide cutters deliver excellent cutting performance and extend tool life.

Large, hard surfaced centralizing ring made from 1-inch thick steel insures the tool runs true in the hole.

With three cutting wings and three open spoils passage areas, the design delivers aggressive cutting and excellent mixing in a low-mass/low-torque reamer.

Located on the low pressure side of each wing, replaceable fluid ports presoak the oncoming tooth, enhancing fluid mixing.

Tip: Hole openers are highly specialized tools. Cutter selection, mill tooth or tungsten carbide insert (TCI) cutters, size/quantity/placement of cones and stabilizer requirements are all variables that must be considered. Since building our first hole opener over 20 years ago, the StraightLine HDD team has the experience to guide you through the process.

CONE SELECTION

FRONT STABILIZER

CONE SPACING

PUSHBACK CAP

HOLE OPENER - Delivers smooth cutting in solid formations—from shale to granite. GROUND CONDITIONS: Solid, non-compactible formations from caliche to granite.SHAFT SIZE: 3" - 9 5/8"SIZE RANGE: 10" - 60"

Proper cone type and size are also key considerations. The cone’s cutting structure is selected based on the specific rock formation. Cone size is also dependent on tool diameter.

When a gap greater than 2-inches exists between the cone and the shaft, all tools are fitted with a centralizer to help center the tool and force rock to the outside. A front stabilizer insures smoother cutting and longer tool life.

Tool performance is closely tied to minimizing the distance between individual cones and between cones and the shaft.

Pushback caps provide a tapered surface on the back side of the reamer to assist pushing the tool backwards, when required.

800.654.3484



STRAIGHTLINE HDD®

Performix® mud mixers and specialty tanks deliver fully yielded fluids faster than anything on the market. At the heart of the system is a precision-engineered Venturi jet that shears, mixes and yields bentonite platelets with incredible efficiency. All Performix models feature:

•High capacity pumps designed to turn the fluid tank over in as little as two minutes.

•Reliable power from Kohler® gas or diesel engines. •Large hopper with pivoting lid doubles as a bag rest. •Compact design adapts to any truck or trailer.•High capacity fuel tanks keep you mixing longer.

SL300 MIX SYSTEMA complete mixer/300-gallon mixing solution, the SL300 is built on a self-contained, compact platform that’s easily mounted to any truck or trailer. (See reference chart.)

GREAT

VALUE

MUD MIXING SYSTEMS


3101-300 Performix® SL300 Mix System 700 lbs. $6,500.00

Tip: Fluid management is critical, providing lubrication, cooling, spoils management and stability to the bore. Thus, properly designed drilling fluids must be considered as much a tool as the drill itself.


PERFORMIX® MIXERThe Performix® Mixer with its 365-gpm output will get you from bentonite introduction to fully sheared, yielded and ready to drill in a matter of minutes. Two key features are electronic start and self-lubricating mechanical seals designed to resist damage, even when the pump is run dry. An optional enclosed secure cabinet is also available.* The Performix® Mixer is the ideal match for our 700-gallon (2,650 liter) tanks. (See reference chart.)


3102-000 Performix® Mixer 585 lbs. $6,500.00

*Optional Enclosed Cabinet


STRAIGHTLINE HDD®

PERFORMIX® ULTRATaking performance to the next level with 450-gpm output, the Performix® Ultra has a 20 Hp engine, electronic start and self-lubricating mechanical seal designed to resist damage, even when the pump is run dry. An optional enclosed secure cabinet is also available.* Pair the Performix® Ultra with the 1,000-gallon (3,800 liter) tank for maximum performance. (See reference chart.)

PERFORMIX® PM170New for 2021 industry-leading performance in a compact footprint that creates the most complete mud system in its class. Featuring 170-GPM, 7 HP Kohler engine, and our field-proven high-speed jet and venturi produce sheared and yielded mud in a matter of minutes. Pair the Performix PM170 with our NEW SL500-gallon tank for maximum performance.

MUD MIXING SYSTEMS


3108-000 Performix® PM170 Mixer 300 lbs. $4,299.00

3102-000 Performix® Mixer 585 lbs. $6,500.00

3103-000 Performix® ULTRA Mixer 600 lbs. $8,000.00


PERFORMIX® PM170 PERFORMIX® MIXER PERFORMIX® ULTRA

Engine Kohler® Command CS Pro 7 Hp (4.5 Kw)

Kohler® Command CS Pro 14 Hp (10.5 Kw) gas enginew/electric start

Kohler® 20 Hp (15 Kw) gas engine w/electric start

Pump 170-gpm (11 lbs.) designed to turn tank over in less than 2 minutes

365 gpm (23 lbs.) designed to turn tank over in less than 2 minutes

450-gpm (28 lbs.) designed to turn tank over in about 2 minutes

Fuel Tank 6-gallon (23 L) 10-gallon (38 L) 10-gallon (38 L)

Hopper Large capacity with pivoting lid that doubles as a bag rest

Large capacity with pivoting lid that doubles as a bag rest

Large capacity with pivoting lid that doubles as a bag rest

Jet High speed jet High speed jet High speed jet

Mechanical Seal n/a Yes, seal is constantly lubricated (the pump can be run dry without damaging the seal)

Yes, seal is constantly lubricated (the pump can be run dry without damaging the seal)

Connections 2-inch (5.1 cm) suction and discharge ports w/ball valves

3-inch (7.6 cm) camlock on suction side; 3-inch (7.6 cm) hose barb on discharge side; 2-inch (5.1 cm) male cam-lock for supply hose

3-inch (7.6 cm) camlock on suction side; 3-inch (7.6 cm) hose barb on discharge side; 2-inch (5.1 cm) male cam-lock for supply hose

Mounting Adapts easily to any truck or trailer

Adapts easily to any truck or trailer

Adapts easily to any truck or trailer

Dimensions 24in. x 39in. x 42in 36in. x 41.25in. x 40in. 36in. x 41.25in. x 40in.

Weight 300 lbs. 585 lbs. 600 lbs.

REFERENCE CHART


PERFORMIX® TANKSCombining unique geometries with precision fluid dynamics, StraightLine HDD engineers have solved the problem of fluids settling at the bottom of the tank. The result—tanks that maximize mixing action and tank roll.

STRAIGHTLINE HDD®MUD MIXING SYSTEMS

D O N ’ T F O R G E TMARSH FUNNEL

SEE PAGE

85


SL1000 MIX SYSTEM TANKThe SL1000 mixing tank provides superior mixing characteristics by combining a precision designed radius bottom with four powerful interior tank guns. A pronounced front-to-back slope is incorporated into the tank design, which together with the precision radius, eliminates fluid settlement issues. The tank’s 44-inch wide footprint enables the installation of two tanks on a standard truck bed. The tank is mounted on a heavy steel frame that makes mounting a breeze.

SL500 MIX SYSTEM TANKNew for 2021 the SL500 tank system is engineered to provide unmatched mixing characteristics. Featuring a radius bottom, four powerful tank jets, front to back slope, and a center sump area eliminating fluid settlement issues. Mounted to our precision engineered heavy-duty skid the entire package is only 24” wide creating an extremely compact footprint needed for easy installation on your HDD trailer.

68.63

43.75

43.80

103.79

66.16

92.00 4.93

10.459.26

64.80


SL500 500-Gallon Mud Tank Assembly 580 lbs. $4,499.00

SL1000 1,000-Gallon Mud Tank Assembly 940 lbs. $6,000.00



1604-100-06 3" (fits 2.55" - 3.2" ID) 8.40 lbs. $324.00

1604-100-07 4" (fits 3.275" - 4.1" ID) 13.74 lbs. $392.00

1604-100-08 5" (fits 4.17" - 5.125" ID) 21.20 lbs. $578.00

1604-100-09 6" (fits 5.13" - 6.08" ID) 24.75 lbs. $704.00

1604-100-10 8" (fits 6.45" - 7.95" ID) 28.30 lbs. $872.00


1604-100-01 1" (fits 0.925" - 1.160" ID) 0.95 lbs. $115.00

1604-100-02 1 1/4" (fits 1.2" - 1.5" ID) 1.15 lbs. $130.00

1604-100-03 1 1/2" (fits 1.45" - 1.75" ID) 1.55 lbs. $158.00

1604-100-04 2" (fits 1.7" - 2.15" ID) 2.90 lbs. $204.00

1604-100-05 2 1/2" (fits 2.2" - 2.6" ID) 4.95 lbs. $277.00

StraightLine HDD® offers two types of pullers, designed to grip the inside of polyethylene ducting. Our standard expanding pullers feature expanding jaws that spread the pulling load around the inside wall of the duct. This allows the maximum load to be applied without damaging the duct.*

STANDARD EXPANDING PULLERS

STRAIGHTLINE HDD®DRILLING SUPPLIES

*A duct sleeve is recommended to prevent stretching when thin wall duct installations. Use of a duct plugger is recommended to prevent fluids from entering the ducting.


Manufactured of hi-fatigue plastic coated aircraft strand steel cable, with a patented, stress-relieving pulling eye, these wire mesh pullers are recommended whenever high strength and small size are required.


1602-100-01 3/4" (fits 0.72" - 0.93" ID) 0.54 lbs. $41.50

1602-100-02 1" (fits 0.94" - 1.15" ID) 0.79 lbs. $44.50

1602-100-03 1 1/4" (fits 1.26" - 1.44" ID) 1.39 lbs. $50.00

1602-100-04 1 1/2" (fits 1.48" - 1.66" ID) 2.00 lbs. $56.00

1602-100-05 2" (fits 1.91" - 2.08" ID) 3.2 lbs. $71.50

1602-100-06 Driving Tool (fits all sizes) 1.5 lbs. $49.00


1603-100-01 3/4" - 1 1/4" Double Weave, 24" L 1.1 lbs. $45.36

1603-100-03 1 1/2" - 2" Triple Weave, 26" L 1.3 lbs. $72.75

1603-100-04 2" - 2 3/4" Triple Weave, 32" L 1.8 lbs. $83.17

1603-100-05 2 3/4" - 3 1/2" Triple Weave, 38" L 2.1 lbs. $122.30




INNER DUCT PULLERS WIRE MESH PULLERS


STRAIGHTLINE HDD®DRILLING SUPPLIES


80789 Wrench Kit, 2 5/8" - 5 3/4" 95 lbs. $1,295.00

StraightLine HDD's portable breakout wrench kit provides a value-priced tool for safe and reliable breaking of torqued joints. Its compact design and light weight make it easy to handle in tight spaces. This kit is designed for use with tool outer diameters of 3" through 5 ¼".

BREAKOUT WRENCH KIT



102-610-02 Marsh Funnel, Viscometer .7 lbs. $27.00

102-611-02 Measuring Cup, Viscometer .45 lbs. $8.00

Extend the thread life of all your connections with Copperhead thread lube. The formulation features a unique combination of copper flakes, graphite, nonmetallic solids and extreme pressure additives to protect against wear, galling and seizing.

StraightLine HDD offers everything you need for mud mixing, including accessories like this tough funnel/viscometer and measuring cup/viscometer. Call us for pricing on polymers, lubrication and bentonite drilling fluid additives.

MARSH FUNNEL & CUP COPPERHEAD THREAD LUBE


4201-001-02 20 lb. Container 21 lbs. $79.00

1816 E. Wasp Rd. Hutchinson, KS 67501

sourcehdd.com straightlinehdd.com

Date post:	15-Jun-2021
Category:	Documents
Upload:	others
View:	3 times
Download:	0 times

CATALOG | VOL 9...1704-339-01 JT1720/JT2020M1/JT2720, 2.00" EZ2 (Hard-Faced) 4.95 lbs. $139.99...

Documents