3456789101112131415161718192021222324252627
LT14 SUV Bandsaws
3000 Bandsaws
HD Bandsaws
Bandsaw Blades
Bandsaw Blades
Tablesaws
Tablesaws
Jointers
Planers
Combination Machines
Lathes
Shapers
Specialty
Panelsaws
Panelsaws
Sanders
Sanders
CNCs
CNCs
Edgebanders
Cyclones
Cyclones
Drum Sanders
Elite Tablesaw
CNC IQ
We thought we would keep it short and sweet:AwardsLT14 SUV 2011 Wood Magazine Overall Best – Editor’s Choice
LT14 SE 2008 Fine Woodworking and Fine Homebuilding Best Overall – Editor’s Choice2008 3LUXE Simply find the best of everything � “BEST OF” SELECTIONS2007 Fine Woodworking and Fine Homebuilding Best Overall – Editor’s Choice LT14 2005 Woodworking and Fine Homebuilding Best � Overall � Editor’s Choice2005 Fine Woodworking and Fine Homebuilding � Reader’s choice2004 Fine Woodworking and Fine Homebuilding � Reader’s Choice2004 Fine Woodworking and Fine Homebuilding Best Overall – Editor’s Choice2003 Wood Magazine features LT 14 in Idea Shop #52002 Woodworkers Journal Tools that Endure Award
LT16 HD 1998 American Woodworker Magazine Editors Choice Award
LT16 2003 American Woodworkers Tool buyers guide – Editor’s Choice Award2002 American Woodworkers Tool buyers guide – Editor’s Choice Award2001 American Woodworkers Tool buyers guide � Editor’s Choice AwardGood Woodworking (UK) gives 4 out of 5 points for Performance
LT18 SE 2005 Fine Woodworking and Fine Homebuilding Reader’s Choice2005 Fine Woodworking and Fine Homebuilding Best Overall – Editor’s Choice2004 Fine Woodworking and Fine Homebuilding Best Overall – Editor’s Choice
LT18 2001 Popular Woodworking “Recommends” LT 18 to readers
Innovations & FirstsShear Force 2007Driftmaster 2004Timber Master 2004Laguna Feeder 2003Pinnacle 2003Resaw King Blade 2003Laguna Guides 2000Dado Scoring 1998Combo 1983
Contract number(GS-21F-0009X)
Not responsible for typographical errors & misprints. Prices & specifications subject to change without notice.Machines may be shown with optional accessories.
All prices in U.S. dollars.
Drif
tMas
ter F
ence
The new Laguna DriftMaster fence system provides the utmost in control and adjustment for the band saw fence. The drift adjustment is accomplished quickly and easily through the quick�set wheel. This tool�free adjustment is quick and easy. Accurate and repeatable veneer cuts can now be performed with the micro adjustment handle. See how this precision adjustment handle allows you to make repeated cuts using the outside edge of the blade. The Hi / Low fence system is easily changed within seconds and is extra long for additional support.
$1,595.00
LT14
SU
V
lagunatools.com
LT14
SU
V B
ands
aw
Laguna Guides
3
Dynamically balanced cast ironwheels & massive center hub.Sealed oversized bearing
Double T slots. Hi�Low Fence rides on solid steel bar.
The 3000 Series is the 3rd generation of our award�winning design.
Two years in the making & engineered without compromise, we like to point out the LAGUNA advantage:
Frame is stiffer, which allows for more tension and equals straighter cuts. Quick�release tension is designed for extreme tension yet very smooth.
Wheels are solid cast iron. Guides have no moving parts.Leeson motor.Extreme Resaw capacity.
Large throat plate for easyaccess. 4 x micro adjustmentIngenious spring�loaded lock.
Trunnion is a master piece made w. 7/8" wide gears & *nitrogengas cylinder.*not avail on 14x14
Laguna Guides are designed like no other guide in the world today. Ten solid pieces of ceramic chosen for their heat resistance. No moving parts makes your blade run with less wobble. Double guides top & bottom ensures no deflection in the blade. Looking at the Laguna Guides is like looking into the future...
shown with optional mobility kit
Motor: 3Hp.Leeson 220 voltResaw Height: 14"Throat : 13 1/2"Dustports: 4"X 2 Quick re lease tension: YesRack & Pinion: Yes Foot brake w.micro switch: YesNitrogen cyl inder table�t i l t : YesTable s ize: 15 3/4" x 19 1/2" Table height: 35.5"Blade Length: 125"Total Height: 70"Weight: 380 lbs.
The VeneerKing is an 8" tall fence designed for the woodworker who requires extra vertical support. Measuring 31.5“ x 8"x 2.5“, it is the mother ofbandsaw fences. Fits Driftmaster.
VeneerKing Fence
SU
V S
pecs
$225.00Starting at
$155.00
30
00
Ser
ies
Ban
dsaw
s4
Quick�release tensionengineered to allow
more psi.
Optional MobilityKit consists of rear axlew.2 wheels & tow bar
The DriftMaster fence system marks another first for Laguna. It provides the utmost in control and repeatability. Drift adjustment is accomplished in seconds using the quick�set wheel. Simply loosen the two ratchet handles & dial in the desired angle. Accurate and repeatable veneer cuts can now be performed with the microadjustment crank handle using the outside edge of the blade. Hi / Low fence system is easily changed within seconds & measures 31.5" x 4" x 2.5". Lip is only 1/2" when used in “low" position.
DriftMaster Fence
$1,895.00Starting at
$1,395.00Starting at
LT14
30
00
Ser
ies
Ban
dsaw
LT
18 3
00
0 S
erie
s B
ands
aw
LT16
30
00
Ser
ies
Ban
dsaw
Motor: 2Hp.Leeson 220 voltResaw Height: 14"Throat : 13 1/4"Dustports: 4" x 2Quick release tension: Yes Rack & Pinion: Not avail.Foot brake w.micro switch: Not avail.Nitrogen cylinder table�tilt: Not avail.*Table size: 19 1/2" x 16"Table height: 35.5"Blade Length: 125"Total Height: 70"Weight: 290 lbs.
Motor: 4Hp.Leeson 220 voltResaw Height: 15 1/4"Throat : 17 1/2"Dustports: 4" Quick release tension: Yes Rack & Pinion: YesFoot brake w.micro switch: YesNitrogen cylinder table�tilt: YesTable size: 20“ x 20"Table height: 36"Blade Length: 145"Total Height: 75"Weight: 525 lbs.
Motor: 3Hp.Leeson 220 voltResaw Height: 12"Throat : 15"Dustports: 4" X 2 Quick release tension: YesRack & Pinion: Yes Foot brake w.micro switch: YesNitrogen cylinder table�tilt: YesTable size: 19 1/2" x 16" Table height: 35.5"Blade Length: 125"Total Height: 70"Weight: 450 lbs.
shown with optional mobility kit.
shown with optional mobility kit.
$2,195.00Starting at
$395.00
HD
Ban
dsaw
s
5
Spe
cs Heavy�Duty
Motor: 4.5HP Baldor 220 voltResaw Height: 16 3/8"Throat: 15 1/2"Dustport: 4"Rack & Pinion: YesDoor safety switch: YesFootbrake w. micro switch: YesGear trunnion table�tilt: YesTable size: 16 1/2" X 22 3/4"Table height: 33 1/2"Blade Length: 150"Height: 76 1/2"Weight: 465 lbs.
Motor: 4.5 HP Baldor 220 voltResaw Height: 18" 3/8“Throat: 17 1/2“Dustport: 4"Rack & Pinion: YesDoor safety switch: YesFootbrake w. micro switch: YesGear trunnion table�tilt: YesTable size: 19" X 25 "Table height: 33 1/2“Blade Length: 158"Height: 77 1/2"Weight: 510 lbs.
Motor: 6 HP Baldor 220 voltResaw Height: 20 3/8"Throat: 19 1/2"Dustport: 4"Rack & Pinion: YesDoor safety switch: YesFootbrake w. micro switch: YesGear trunnion table�tilt: YesTable size: 19 " X 25"Table height: 35 1/2"Blade Length: 176"Height: 86 1/2"Weight: 585 lbs.
Motor: 6 HP Baldor 220 voltResaw Height: 17"Throat: 23 1/4"Dustport: 4"Rack & Pinion: YesDoor safety switch: YesFootbrake w. micro switch: YesGear trunnion table�tilt: YesTable size: 24 " X 34 1/2"Table height: 35 1/2"Blade Length: 183"Height: 87"Weight: 725 lbs.
Motor: 6 HP Baldor 220 voltResaw Height: 24 3/8"Throat: 23 1/4"Dustport: 4"Rack & Pinion: YesDoor safety switch: YesFootbrake w. micro switch: YesGear trunnion table�tilt: YesTable size: 24 " X 34 1/2"Table height: 35 1/2“Blade Length: 201"Height: 94"Weight: 755 lbs.
LT 18
X 18
HD
LT 2
0 X
20
HD
LT 2
4 X
17 H
D (s
how
n)
LT2
4 X
24
HD
LT 16
X 16
HD
Shown with optional Driftmaster Fence
Laser cut & robot welded in state�of�the�art factory in Northern Italy & fitted with American� made Baldor motors according to customer specifications. Laguna continues to set the benchmark by which all bandsaws are measured.
Laguna HD bandsaws have long been considered the finest in the world.
$2,995.00Starting at
lagunatools.com
$5,375.00Starting at
$3,350.00Starting at
$3,995.00Starting at
$4,895.00Starting at
Ban
dsaw
Bla
des
6Every Laguna Bandsaw Blade is ground and welded in our own state�of�the�art blade center utilizing superior Swiss and German machinery available in our industry today. This guarantees you the finest blade welds to maximize the performance of your Laguna Bandsaw.
The Resaw King is perhaps the world's finest resawing blade. Manufactured with C4 carbide teeth, this blade allows you to cut ultra�smooth, wafer�thin veneers with minimal waste. Woodworkers demanding the best will be impressed. The triple vari�tooth design minimizes vibra�tion and lowers harmonics. Teeth are individually brazed and ground to perfection using diamond wheels on our custom�built Shark grinder designed exclusively for this blade.
The new 3/4" ProKing is manufactured with the same exacting standards as our Resaw King, but in a more compact package. Designed for use in smaller bandsaws that allow a maximum blade width of 3/4".
The Laguna ShearForce is an exceptional blade that offers an economic alternative to our ResawKing. It combines great resaw finish with a longer blade life. The ultra�thin kerf ensures an unparalleled yield.
Made from tempered Swedish Silicon Steel, the ProForce is a premium blade designed for longer life and better performance than traditional carbon steel blades. This line offers a wide range in both blade width and tpi.
ResawKing
ProKing
ShearForce
ProForce
BBPF14-4 1/4" x 4tpi .025"
Designed for tight radius cuts. Rough finish
BBPF14-141/4" x 14 tpi .025"
Designed for radius cuts. Smooth finish
BBPF114-2XT1�1/4" x 2 tpi .028"
Designed for radius cuts. Rough finish
BBPF34-2XT3/4" x 3 tpi .032"
Designed for straight cuts. Medium finish
BBPF114-31�1/4" x 3 tpi .042"
Designed for straight cuts. Medium finish
BBPF18-141/8" x 14 tpi .0125"
Designed for radius cuts. Smooth finish
BBPF38-43/8" x 4 tpi .025"
Designed for radius cuts. Medium finish
BBPF1-3XT1" x 3 tpi .023"
Designed for straight cuts. Medium finish
BBPF12-31/2" x 3 tpi .025"
Designed for slight radius & straight cuts. Rough finish
BBPF1-111" x 1.1 tpi .023"
Designed for straight radius cuts. Rough finish
Ban
dsaw
Bla
des
7
PART#
PART#
Not responsible for typographical errors & misprints Specifications subject to change any time
$27.75
.
. ...
.
.
.
.
.
.
...
N/A N/A N/A N/A N/A N/A N/A N/A
Choosing The Right Blade
Narrow blades will be able to make tighter radius cuts but will tend to wander when making long straight cuts. Wide blades will have a much easier time cutting straight but will not allow you to make tight radiuses. A good rule of thumb is to always use the widest blade that the job requires. The wider blades have more beam strength and will allow higher feed rates and durability. Below is a chart that will show you the radius you can expect to achieve for each blade size.
lagunatools.com
Blade Size Radius of Cut1/4" 5/8"3/8" 1-1/4"
Blade Size Radius of Cut1/2" 2-1/2"3/4" 5-1/2"
Blade Size Radius of Cut1" 7"
1-1/4" 8-1/2"
Fus
ion
Tab
lesa
w
Fusion Specs
Quick Release
Bla
de G
uar
d
8T
able
saw
sThe new Fusion table saw is a premium light duty table saw. Unlike other hybrids, the trunnion is not attached to the tabletop, but mounted onto the frame like a real cabinet saw, this ensures the tabletop stays flat.
Motor: 110 volt 1 3/4 HP (15 AMP)Motor 220 volt 2HP (8 AMP)Blade diameter: 10"Quick release riving knife:YesSafety Blade guard: YesRip capacity: 36"Optional Rip: 52"Blade Tilt: 0�45°Cast Tabletop Dimension: 20" x 27"Cast Table Extension X 2: 12" x 27"Table Height: 34 1/2"Build in wheel system: YesMiter Slots x 2: 3/4" x 3/8"Dustport: 4"Drive: 1 + 1 beltThroat�Plate: Standard + DadoWeight: 266/349 lbs
Fus
ion
Tab
lesa
w
Quick release allows change between riving knife and blade guards in seconds.
dvantage
the
Options: 52" Fence w. legs & support table
Saw unit mountedto the frame.
Heavy gears built to last.
Hai
rline
Re
ado
ut
$1,295.00Starting at
Do
veta
il T
able
saw
Slid
ing
Tab
le
Ro
uter
Tab
le
Easy glide fence
European Tablesaw Tablesaw Accessories
3�hp motor50" rip capacity10" or 12" blade capacityOptional scoringOptional mobility kit
Ten
oni
ng J
ig
Uni
vers
al B
ase
Lef
t�T
ilt T
able
saw
Tab
lesa
ws
9
TS
Tab
lesa
w
$2,195.00Starting at
$1,995.00Starting at
$99.00$3,295.00 $99.00
Motor: 4HP Leeson, 220 voltBlade Diameter: 10"Quick Release Riving Knife: YesWith access through Throat PlateSafety Blade Guard: YesRip Capacity: 52"Blade Tilt: 0�45°Tabletop Dimension: 20" X 27"Cast table extension X 2: 10" X 27"Table Height: 34"Miter Slots X 2: 3/4" x 3/8"Dustport: 4" (E�Z remove)Drive: Flat Poly Groove Throat�Plate: Standard + DadoWeight: 510 LBS
Dovetail construction.
Massive Arbor.
Laguna Cabinet saws are top performers in a crowded field. The main difference between the 3HP & 4HP is the heavy dovetail construction found in the MTS0300 that moves the trunion VERTI�CAL rather than pivot. The 3HP saw uses 3 X V belt, whereas the 4HP utilizes a flat polygroove belt�lowering vibration.
lagunatools.com
Motor: 3 HP Leeson, 220 volt
Blade Diameter: 10"
Quick Release Riving Knife: Yes
With access through Throat Plate
Safety Blade Guard: Yes
Rip Capacity: 52"
Blade Tilt: 0�45°
Cast Tabletop Dimension: 20" x 27"
Cast Table Extension X 2: 10" X 27"
Table Height: 34"
Miter Slots X 2: 3/4" x 3/8"
Dustport: 4" (E�Z remove)
Drive: 3 X V�belt
Throat�Plate: Standard + Dado
Weight: 485 LBS
Join
ters
10
8" Parallelogram
6" STD 6" ShearTec-II 8" Wedgebed 8" Parallelogram 12" JointerMotor: 1.5 HP 110 V 1.5 HP 110 V 2 HP 220 V 3 HP 220 V 5 HP 220 VBed: 6 X 56" 6 X 56" 8 X 75" 8 X 83" 12 X 29.5"Design: Wedgebed Wedgebed Wedgebed Parallelogram ParallelogramHead: 3 Knives / 2.4" ShearTec-II / 2.4" ShearTec-II / 3" ShearTec-II / 3" ShearTec-II / 4"Inserts: N/A 6 X 7 = 42 6 X 9 = 54 6 X 9 = 54 6 X 13 = 78Wheel System: Built in Built in Built in Built in Not IncludedWeight: 388/425 388/425 510/600 648/750 968/1100
6"
Wed
geb
ed
8"
Wed
geb
ed
12"
Indu
stria
l
Standard HeadLaguna ShearTec II
� Standard head only accepts max. of 65lbs of torque.� Laguna ShearTec II can handle torque force up to 120lbs.� Standard cone-shaped design causes the knife to be brittle.� T- shaped step recess design is less suspectible to breaking . � Laguna ShearTec II is a 6-row system, better finish & longer life.
Laguna ShearTec II Vs Standard Heads
She
ar T
ecII
Cut
terh
ead
dvantage
the
Spe
cs
$895.00 $2,795.00 $5,450.00$1,945.00$1295.00
Model 13" Molder/Planer 13" 4 Post 16" 4 Post 20" 4 Post 20" Pro 25" IndustrialMotor: 3HP 220 V 3 HP 220 V 5 HP 220 V 5 HP 220 V 7.5 1ph/10HP 3PH 10HP 1PH/15HP 3PHDesign 4 Post 4 Post 4 Post 4 Post Mono-Frame Mono-FrameBed w. Ext. 13" x 35" 13" X 35" 16" X 56" 20" X 56" 20" X 56" 25" X 56"Feed Speed 12/24 FPM 12/24 FPM 16/20 FPM 16/20 FPM 16/20 FPM 10 - 30 FPM Electro.Min-Max 3/16" - 6" 3/16" - 6" 3/16" - 8 " 3/16" - 8" 3/16" - 8" 3/16" - 9"Inserts: 3 Knives 6 X 15 = 90 6 X 18 = 108 6 X 23 = 138 6 X 23 = 138 6 X 29 = 174Wheel System: Built in Built in Built in Built in Not Included Not IncludedWeight: 220/280 LBS 220/280 LBS 567/668 LBS 880/990 LBS 1276/1364 LBS 1950/2100 LBS
Spe
cs
Pla
ners
11
Mo
lde
r/P
lane
r 13
" 4
Po
st P
lane
r 13
"
20
" P
ro P
lane
r
25
" In
dust
rial P
lane
r
20
" 4
Po
st P
lane
r
16"
4 P
ost
Pla
ner
$2,995.00 $3,995.00
$11,995.00
$1,3
95.00
$2,1
95.00
$5,995.00
lagunatools.com
Digital readout Digital readout
Digital readout
NLX31HX31
Model 10" J/P 12" J/P 16" J/P HX31 NLX31Motor: 2HP 220 Volt 3HP 220 Volt 4HP 220 volt 3 X 3HP 220 Volt 3 X 3HP + 1/2HP 220 VoltJointer Bed 10" X 42" 12" X 63" 16" X 63" 12" X 52" 12" X 52"Head ShearTec ShearTec SherTec Tersa Quick Change Tersa Quick ChangeFeed Speed 26 FPM 26 FPM 26 FPM 18 FPM 18 FPMMin. Max Planer 1/8" - 7" 1/8" - 8 1/2" 1/8" - 9" 1/8" - 9" 1/8" - 9"Dust collection 4" 4" 4" 4" X 3 4" X 3S/T Stroke N/A N/A N/A 55" 96"Mortiser Incl. Optional Optional Optional Yes YesShaper Spindle N/A N/A N/A 1 1/4" 1 1/4"Shaper Speed RPM N/A N/A N/A 6000 2900/4000/6000/7500Size 43" X 22" 64" X 24" 64" X 28" 108" X 50" 120" X 108"Weight 440/530 lbs 760/849 lbs 1034/1200 lbs 1185/1400 lbs. 1540/1820 lbs
Spe
cs
Co
mbi
natio
n M
achi
nes
Jointer/Planer
125Function Combination Machines
Eurostyle combo machines make good use of the space in your shop. Our 10 model is perfect for hobbyists and small shops that are tight on space. The 12 version provides extra muscle and capacity with wider, longer tables and more horsepower. The 16 version also has a matched jointer and planer with a tight footprint. Each of these machines features the Laguna ShearTec cutterhead for flawless cuts and easy knife changes. An optional mortiser is available as an accessory on each machine to make perfect joints.
Pla
tinum
Ser
ies
10 J
oin
ter/
Pla
ner
Pla
tinum
Ser
ies
12 J
oin
ter/
Pla
ner
$3,295.00$1,995.00 $13,000.00$9,439.00$4,495.00
2042 Lathe
13
Lat
hes
20�42
18/
47
La
the
18�47
Turning Accessories
8�Pieces Turning Tools
Model 18/47 20-42Motor: 2HP 220 Volt 3 HP 220 VoltSpd Control Electronic VFD Electronic VFDRange 100-1200/200-3200RPM 50-1000/100-2000/150-3000Drive Type V Belt Polygroove Flat Max Diameter 18" 20"Capacity 47" 42"Face Plate 6"/ 24 Index 6"/ 24 IndexTailstock Travel 4 1/4" 4 1/4"Head + Tail Taper MT2 MT2Spindle Thread 1 1/4" X 8 TPI 1 1/4" X 8 TPIOutboard Optional IncludedOptions Chisel Set/ 4" 4 Jaw Chuck Chisel Set/ 4" 4 Jaw ChuckSize 74" X 20" X 48" 72" X 16" X 50" Weight: 500/580 lbs. 607/756 lbs.
Spe
cs
4” Chisel Set
lagunatools.com
$1,845.00Starting at
$3,195.00Starting at
$249.00
$295.00
Model:Motor:Table SizeSpindle TravelSpindles Incl.Collects Incl.Max. Tooling Hts.Max. DiameterSpeedsForward + ReverseDigital ReadoutDrive SystemSpindlePredrilled FeederSliding TableWheel System:Weight:
4HP Deluxe4HP 220 Volt, 1 ph.31" X 28"3"3/4" + 1 1/4"1/4" + 1/2"3 1/2"5 1/2"5000/7000/10,000YESNot Available1 X V-BeltFixed Not AvailableNot AvailableNot Included380/450 lbs.
5HP Pro5HP 1Ph./7.5HP 3PH.31" X 39"4"3/4" + 1 1/4"1/4" + 1/2" 4"7"5000/7000/10,000Yes StandardPolygroove, FlatFixed Yes both cornersNot AvailableBuilt in640/720 lbs.
5HP 30005 HP 220 V. 1 PH.28" X 36" Incl. S/T3 1/2"3/4" + 1/4"1/4" + 1/2"4"7"3600/5100/8000/10,000YESNot Available1 X V-Belt0 - 45 Degree Tilt FWD.Not Available35" X 13"/ stroke: 41"Not Included880/960 lbs.
� Sliding Table� 45˚ Tilt
Digital readout
5 HP Pro
30
00
Se
rie
s
De
luxe
Sh
ap
er
Pro
Sh
ap
er
Sha
pers
14
The Laguna Tools Shaper Start-Up Set is a versatile shaper-cutter head system that combines a heavy-duty steel cutter head with 20 of the most common profiles used in woodworking. Also included with each profile is a chip limiter, which prevents over feeding to help provide smooth, chatter-free and consistent cuts. This is an ideal starter set with many other profiles available.
Un
ive
rsa
l Sh
ap
er
Se
t$1,995.00 $2,995.00
$495.00 $4,839.00
Motor: 10hp 220v 3�phase w/ VFD Speed range: 6000 to 8000 RPM Spindle: 1 1/4" Diameter x 5“ Height Cutter capacity: 4"�7" Air requirement: 90 PSI 1 CFM Dust port: 5“ Maximum arch height: 2" standard Maximum material thickness: 1 1/4" Maximum arch width: 24" Weight: 1400 lbs
Spe
cial
ty
15
Overhead Controls: Standard Lube System: Automatic Vari. Speed: 30 � 112 ft/min Min. Work Length: 6 1/2" Blade Capacity: 10" to 12" Arbor Size: 1" Power: 220V � 3 phase Main Motor: 15 hp Max. Work (t): 3�7/8" Hold Down Rollers: 4 Dust Port: 4" Fedd Chain: 6" high grip Blade to Frame: 18" Weight (Net): 2,420 lbs.
Ra
ise
d P
an
el M
as
ter
Do
ve
tail
Ma
ch
ine
Str
aig
ht�
line
Rip
sa
wlagunatools.com
LB
M2
00
Mo
rtis
er
V�W
ay
Slo
t M
ort
ise
r
Motor: 2 hp 1�phase Baldor Work Table: 23.5" x 12.5" Max. Side to Side Travel: 9.6" Max. Plunge Travel: 8" Max. Vertical Movement: 6" Dowel Index Center: 16mm, 20mm, 25mm, 32mm Weight: 575 lbs.
Motor: 2 HP � 220 volts � single phase Chuck capacity: 5/8" Work table size: 8" x 19.5" Side to side travel: 11" Plunge travel: 5.5" Table vertical travel: 5.5" Maximum mortise height above table: 9.5" Miter fence: 18" x 2�1/4" Drill index centers: 16, 20, 22, 25 mm Height to top of machine: 42" Base size: 20.5" x 27" Weight: 270 lbs
Motor: 1 hp RPM 1,720 Volts: 110 Amp Breaker: 16 Chisel Capacity: 1/4" to 1 " Max Mortising Depth: 3" Max. Chisel Travel: 8 1/4 " Drill Chuck Capacity: 1/2" Max. Movement (f�r): 5 3/4" Max. Movement (l�r): 6 1/3" Spindle to Fence: 1 1/2" Chisel to Table: 8 1/4" Table Size: 16" x 6" Height: 68" Weight: 290 lbs.
Ho
llow
Ch
ise
l Mo
rtis
er
� Motor: 2 hp 220 volt 3 Ph � Thickness of Tenon: 1/8" - 2-23/64" � Width of Tenon: 15/64" - 23/32" � Depth of Tenon: 25/64" - 1-3/16" � Cutter Bit Vertical Adj: 1-3/16" � Maximum Workpiece Size: 59" x 16" (L x W) � Pneumatic Clamps: 4 w/ Individual Controls � Spindle Speed: 21,500 RPM � Dust Port: 4" � Air Pressure Requirement: 71 psi � Base Size: 42" x 22" � Machine Size: 56" x 36" � Weight: 1,320 lbs.
Tilting head.
$3,995.00 $775.00 $995.00
$8,495.00 $15,000.00
$1,995.00
San
ders
16
Os
cill
ati
ng
Sp
ind
le S
an
de
r
Os
cill
ati
ng
Ed
ge
Sa
nd
er
Quality conveyor belt for long service life. Variable feed speed 3�20 FPM. Dynamically balanced drums ensure smooth running. Two drum configurations provide high efficiency sanding performance.
25
" D
rum
Sa
nd
er
Spe
cs
Weight:
ModelMotor:Feed MotorMin MaxDrum DiameterFeed SpeedDust CollectionConfigurationDrum RPMDrive
5HP 220 Volt 1Ph.1/6HP DC Motor1/4" - 12"6 1/2"6.2 - 30 FPM 3 x 4"2 Drums16002 X V-Belt778/858 lbs.
37X2
Spe
cs
Weight:
ModelMotor:Feed MotorMin MaxDrum DiameterFeed SpeedDust CollectionConfigurationDrum RPMDrive
3HP 220 Volt 1Ph.1/6HP DC Motor1/4" - 12"5"6.2 - 30 FPM 2 x 4"2 Drums16002 X V-Belt418/484 lbs.
25X2
Motor: 1HP 110 VoltTable Size: 24" X 24"Oscillation: 1 ½"Oscillation Pr. Min: 75Speed: 1725 RPMSpindles Incl: 10Min Spindle: 1 ¼" X 5"Max Spindle: 4" X 10"Dust Collection: 1 X 4"Tilt: 0 – 45°Weight: 301/319 lbs.
Sp
ec
s
� Size: 6 X 89"
� 2HP 220v 1ph
� Oscillation: 1/2"
� Oscillation Adjustment: E-Z Knob
� SFPM: 3900
� Drum Diameter: 4-1/4"
� Main Table: 30" x 10"
� End Table: 12" X 12"
� Dust port: 4"
� Includes Cabinet with Drawer
� Includes Miter Gauge
� Footprint: 48" x 20"
� Net Weight 258 lbs.
� Ship Weight 306 lbs
$2,495.00
$4,495.00
$1,595.00
$1,495.00
MODEL: 25 1K 37 1K 43 1K 51 1K Motor: 10HP 1 Phase/ 10HP 3 Phase 10HP 1 phase/ 20HP 3phase 25HP 3phase 30HP 3phaseMODEL: 25 2RK (Roller + Combo head) 37 2RK (Roller + Combo head) 43 2RK (Roller + Combo head) 51 2RK (Roller + Combo head)Motor: 10HP 1 Phase/ 10HP 3 Phase 10HP 1 phase/ 25HP 3 phase 25HP 3 phase 30HP 3 phaseFeed Motor: 1HP Variable Speed, 12-60 FPM 1HP Variable Speed, 12-60 FPM 1HP (43 1K) / 2HP (43 2RK) 2HP Variable SpeedRaise & Lower Motor: 0.25HP 0.25HP 0.25HP 0.25HPRoller Diameter: 4" (25 1K) 4" (25 1K) 4" (25 1K) 4" (25 1K)Roller Diameter 8" + 4" (25 2RK) 8" + 4" (25 2RK) 8" + 4" (25 2RK) 8" + 4" (25 2RK)Belt Size: 25" X 75" 37" X 75" 43.3" X 75" 51" X 75"Dustport: 4" 4" 4" 4"Thickness Gauge: Included Included Included IncludedMax Sanding Height: 5" 5" 5" 5"Pressure Shoes : Included Included Included IncludedControl: PLC PLC PLC PLCReadout: Digital Digital Digital DigitalSize: 50" X 45" X 78" (25 1K) 50" X 55" X 78" (37 1K) 50" X 61" X 80" (43 1K) 50" X 70" X 80" (51 1K)Size: 61" X 45" X 78" (25 2RK) 61" X 55" X 78" (37 2RK) 61" X 61" X 80" (43 2RK) 61" X 70" X 80" (51 2RK)Weight: 1760/2200 LBS (25 1K) 2090/2540 LBS (25 1K) 2420/2850 LBS (43 1K) 2970/3420 LBS (51 1K)Weight: 2420/2900 LBS (25 2RK) 3190/2650 LBS (37 2RK) 3630/4200 LBS (43 2RK)
San
ders
17
Designed for full production & loaded with features such as:
37
1 K
Pro
Sa
nd
er
Sp
ec
s
18 X
36
Wid
eb
elt
Sa
nd
er
38
" W
ide
Be
lt S
an
de
r
Feed Direction
2 RK
Feed Direction
1 K• PLC control• Automatic Thickness Gauge• Pneumatic Adjustable Oscillation• Disc Brake• Dynamically Balanced Rollers• Electronic Vari. Spd. 12-60 FPM• 75" Belt Length• Big Diameter Rollers 4" + 8"• Safety Bar• E-Z Belt Change• Digital Readout• CSA Approved• Solid Frame• 4 Acme Threaded Screws• Industrial Quality Conveyor Belt
The Laguna ProSanders is one of the most comprehensive lineups of Widebelts on the market today.
Model 18-36 24X52 38X52Motor: 3HP 220 Volt 1Ph. 5HP 220 Volt 1Ph. 7.5HP 220 Volt 1Ph.Feed Motor 1/4HP DC Motor 1/2 HP DC Motor 1/2 HP DC MotorMin Max 1/4" - 5" 1/4" - 5" 1/4" - 5"Drum Diameter 3.2" 6 1/2" 6 1/2"Feed Speed 6.2 - 30 FPM 6.2 - 30 FPM 6.2 - 30 FPMDust Collection 1 x 4" 2 X 4" 2 X 4"Belt Size 18" X 39" 24" X 52" 38" X 52"Drum RPM 1720 1539 2073DRO Not Available Included IncludedWeight: 473/583 lbs. 891/1001 lbs. 1155/1287 lbs.
Specs
There are two main advantages to Widebelt sanders over drum sanders: Longer belt & oscilla�tion. The 52 series bridges the gap between drum sanders and heavy�duty widebelts by providing the benefits of a widebelt without costing much more than a drumsander.
lagunatools.com
$2,995.00 $4,395.00 $6,495.00
$22,995.00 $29,995.00$11,995.00 $14,995.00
Pan
elsa
ws
18P
ro S
eri
es
9'
Pro
Se
rie
s 6
'
Spe
cs
Pro 9
Pro 6
Model 4 Pro 6 Pro 9 Pro PP14 PP18Motor: 4HP 220 Volt 1Ph. 4HP 220 Volt 1Ph. 4HP 220 Volt 1Ph. 5HP 220 Volt 1Ph 7.5HP 220 Volt 3Ph.Scoring Motor 0.5HP 0.5HP 0.5HP 3/4HP 3/4HPStroke 4 Ft. 5 Ft. 8 Ft. 6" 10 Ft. 6" 10 Ft. 6"Blade Min-Max 10" - 12" 10" - 12" 10" - 12" 12" - 14" 12" - 18"Rip Capacity 32" 32" 50" 50" 50"Overhead Guard Not Incl. Not Incl. Not Incl. Standard StandardOn/Off Not Incl. Standard Standard Standard StandardArbor Size 5/8" + 20MM 5/8" + 20MM 5/8" + 20MM 30MM + 20MM 30MM + 20MMRPM 3450 3450 3450 3000/4000/5000 3000/4000/5000/6000Digital Readout Not Available Not Available Not Available Optional OptionalWeight: 220/280 LBS 220/280 LBS 567/668 LBS 1688/2215 lbs. 2346/2815 lbs.
• Hard-wire remote on & off• Scoring motor• Rip fence w. micro adjust• Telescoping cross cut fence
• Hard-wire remote on & off• Scoring motor• Rip fence w. micro adjust• Telescoping cross cut fence
$6,500.00 $7,995.00 $11,995.00 $16,500.00$4,495.00
Pan
elsa
ws
19
Saw GroupDumbbell Design Linear Guides
(PP14)
Hard�wired on & off
CN
C P
an
els
aw
PP
14 P
an
els
aw
PP18
PP14
lagunatools.com
• Electrical up & down• Electrical tilt• Electrical scoring• LED speed readout
• Safety overhead guard• Max blade size 14"• Sliding table lock• Digital tilt readout
CN
C20
Sm
art
Sh
op
CN
C
Swift CNCTurner CNC
The Laguna SmartShop CNCs are truly “world" machines. Themachines feature the very finest components available from Europe,Asia, and the United States. To begin with, the 3,500 lb. machineframes are welded from thick walled structural steel. The rigid frames are the basis for positioning accuracy and edge finishes compa rable to the best CNCs in the world. Helical rack and pinion drive sys tems (ball screws in the Z axis) make the machines amazingly quiet and smooth. Laguna SmartShop CNCs feature the easy to use Laguna CNC Touch Control™ system from control industry leader B&R Automation. A variety of electro spindles, including the popular HSD 11 HP, are also available.
Sw
ift
Se
rie
s C
NC
Tu
rne
r C
NC
The Laguna CNC Turner is a machine to observe in operation. It has a cylindrical work envelope of 8" in diameter x 42" in length. The machine includes a 2 HP liquid cooled industrial cartridge type spindle and features the easy to use Laguna CNC Touch Control™ system from control industry leader B&R Automation.The Laguna CNC Turners can produce tradi tional wood turnings, decorative corner posts with applied 3D surfaces, and 3D carvings.
The Laguna Swift Series CNC Routers were developed for the discriminating woodworker who wants to step into the CNC world. The machines are equipped with heavy duty liquid cooled electro spindles and feature the easy to use Laguna CNC Touch Control™ system from B&R Automation.
The Laguna Swift CNC’s are available in 2’ x 3’, 4’ x 4’, and 4’ x 8’ table sizes. The 2’ x 3’ and 4’ x 4’ Swift CNC‘s are driven by precision ground ball screws in both X and Y axes, the 4’ x 8’ Swift CNC is driven by precision rack and pinion drives in the X and Y axes. The machines feature “T Slot" style tables for ease of part fixturing.
$26,995.00Starting at
$9,995.00Starting at
$8,895.00Starting at
LA
GU
NA
CN
C
LA
GU
NA
CN
CC
NC
21
Minimize time and production costs is more essential than ever. That is why Computer Numerical Control (CNC) automation is revolutionizing the future of wood working. The CNC is able to interpret the exact commands
needed to produce a high level quality of work with very little amount of time. Replace most of your machines, reduce your labor force and embrace technology. Success is a journey… take your business to new heights.
Sm
art
Sh
op
D S
eri
es
CN
C
Pu
ma
CN
C
The Laguna D�Series CNC The machines feature a thick�walled structural steel, welded frame for excellent accuracy and precision and feature a 4’ x 8’ vacuum table featur�ing our six�zoned universal table design. The Laguna D�Series CNCs are equipped with long�life 4 HP cartridge�type indus�trial electro�spindles and include helical rack�and�pinion drive systems (ball screws in the Z axis) and precision ground con�toured guide rails. The Laguna D�Series CNC machines are a great way to get into nested�based cabinet manufacturing on a budget while still main�taining part accuracy and edge finish.
The Laguna Puma CNC is the flagship machine in the Laguna CNC product line. The machine is a “go�fast" machine that was designed around a three�ton (6,000 lb.) frame, extremely fast gantry�mounted carousel tool changer, and lightning fast closed�loop servo drives. Add to that an 11 HP HSD electro�spindle, and a six�zoned universal vacuum table, and you have a machine that will perform with machines costing three or four times as much. And the Laguna Puma CNC now includes the easy�to�use Laguna CNC Touch Control™ system from control industry leader B&R Automation.
Available in 4’ x 8’ and 5’ x 10’
lagunatools.com
$54,995.00Starting at
$22,995.00Starting at
The Laguna Tools Bandit 4/8 is the heavyweight in our line of automatic edgebanders. This machine has the capacity to handle up to 8mm edgebanding as well as individual laminate strips. The gluepot allows for maximum flexibility for use with PVC, wood tape, laminate and wood strips. Standard features include automatic end trim with dual blade end cutting units, edge trimming with dual high� frequency motors, scraping unit, buffing unit, adjustable overhead control panel, pull�out support rollers for wide panels, and electronic temperature control with digital readout.
Minimum Panel Width: 2.36" Minimum Panel Length: 4.7" Panel Thickness: 10mm to 60mm Feed Speed: 36 to 48 ft/min Size (L x W x H): 149" x 39" x 71" Weight: 3,600 lbs.
Edg
eban
ders
22
Ba
nd
it 2
/3
Ba
nd
it 4
/8
Ed
ge
ba
nd
er
Model Bandit 2/3 Bandit 4/8Motor: 220 Volt 1Ph 6HP Total 220 Volt 3Ph 11HP TotalMin Max. Tape 0.4 MM - 3 MM / 1/64" - 1/8" 0.4 MM - 8 MM / 1/64" - 5/16"Min. Max. Panel Thickness 8 MM - 40 MM / 5/16" -1 1/2" 10 MM - 60 MM / 3/8" - 2 1/4"Min. Panel Length 200 MM / 8" 120 MM /4 3/4"Feed speed 32 FPM 39 FPMBuffing + Scraping Optional StandardGlue Pot Capacity 1.4 Liter 4 LiterSize 83" X 27" X 53" 143" X 30" X 68"Weight: 1496/1914 lbs 2926/3586 lbs
Laguna Bandit 2/3 features a heavy duty�track feed system. This is considered industry standard for all high�end edgebanders, allowing for reliable and precise feed compared to belt�type banders.
$33,995.00Starting at
$19,995.00Starting at
Cyc
lone
23
Mo
bile
1.5
HP
Cyc
lone
Dust Collector Accessories
Mo
bile
2H
P C
yclo
ne
Spe
cs
Spe
cs
1.5 HP Cyclone
Model Mobile ManualMotor: 2HP 220 VoltFiltration 1 Micron CanisterFilter Cleaner Manual. Every 8HSuction 1450 CFMMax. Static Press 10.5" H2OInlet 6"/ 2 X 4"Sound Rating 76 DbRemote Control IncludedSize 27" X 36" X 70"Weight 205/234 lbs.
Cyclone Bags
2 HP Cyclone
Model Mobile ManualMotor: 1.5HP 110 VoltFiltration 1 Micron CanisterFilter Cleaner Manual. Every 8HSuction 1200 CFMMax. Static Press 8.5" H2OInlet 6" / 2 X 4"Sound Rating 75 DbRemote Control IncludedSize 21" X 32" X 62"Weight 121/138 lbs.
lagunatools.com
Optional heavy-duty bags
• Compact & mobile• 30 gal. drum w. wheels• Quick-release design• Crank handle for EZ clean
• Compact & mobile• 18 gals. drum w. wheels• Quick release design• Crank handle for EZ clean
$1,395.00
$1,195.00
$40.00
$175.00
Spe
cs CYCLONE
Mo
bile
3H
P C
yclo
ne
Sta
tiona
ry 5
HP
Cyc
lone
Sta
tiona
ry 10
HP
Cyc
lone
Model Mobile AutoMotor: 3HP 220 VoltFiltration 1 Micron CanisterFilter Cleaner Autom 30 S. CycleSuction 2200 CFMMax. Static Press 14.8" H2OInlet 8"/ 3 X 4"Sound Rating 78 DbRemote Control IncludedSize 47" x 26" X 83"Weight 396/449 lbs.
Model Stationary AutoMotor: 5HP 220 VoltFiltration 1 Micron CanisterFilter Cleaner Autom. 30 S. CycleSuction 3600 CFMMax. Static Press 16" H2OInlet 10"/ 4 X 4"Sound Rating 80 DbRemote Control IncludedSize 56" X 42" X 92"Weight 427/517 lbs.
Model Stationary FilterBagMotor: 10HP 220 Volt, 3 Ph.Filtration 1 Micron Filter BagFilter Cleaner Autom. 30 S. CycleSuction 6000 CFMMax. Static Press 17" H2OInlet 13"/ 5 X 4"Sound Rating 95 DbRemote Control IncludedSize 85" X 65" X 148"Weight 572/ 755 lbs.
Model Mobile ManualMotor: 3HP 220 voltFiltration 1 Micron CanisterFilter Cleaner Manual. Every 8HSuction 2111 CFMMax. Static Press 11.2" H2OInlet 8"/3 X 4"Sound Rating 78 DbRemote Control IncludedSize 31" X 43" X 85"Weight 242/308 lbs
Spe
cs
Cyc
lone
s24
Cyclone Remote
3 HP Cyclone
Mo
bile
3 H
P C
yclo
ne
• Compact & mobile• 60 gal. drum w. wheels• Quick-release design• Crank handle for EZ clean
$2,195.00 $2,995.00 $3,995.00
$1,695.00
3H
P C
yc
lon
e
Dru
m S
ande
rsC
ircul
ato
r
25
Model: MDCCIRC1400Motor: 1/3 HP 110 VoltCFM: 1400Timer: 2, 4, 6, 8H + InfiniteOuter Filter: 5 MicronInner Filter: 1 MicronNoise Rating: 63 DbSize: 31" X 25" X 15"Weight: 70/73 lbs.Optional Filters: Electrostatic/Charcoal
Spe
cs
Spe
cs
Model: DS13 DS17Motor: 1 HP, 110 V, 1PH 2 HP, 220 V, 1PHConveyor Motor: 1/8 HP, 110 V, 0-22 FPM 1/4 HP, 220 V, 0-22 FPMDrum Speed: 1725 FPM 1725 FPMMax Material Dimension: 13" wide x 4" thick 17" wide x 4" thickMin Material Length: 6" 6"Drum Size: 5" 5"Dust Port: 4" 4"Weight: 183/220 lbs 220/260 lbs
13 “
Dru
m S
an
de
r17
“ D
rum
Sa
nd
er
lagunatools.com
$1,195.00 $1,495.00
$450.00
Elit
e T
able
saw
Elite Specs
26E
lite
Tab
lesa
w
Motor: 220 volt 3HPBlade diameter: 10"Quick release riving knife:YesSafety Blade guard: YesRip capacity: 52"Blade Tilt: 0�45° Cast Tabletop Dimension: 21" x27"Cast Table Extension X 2: 12" x 27"Table Height: 35 1/2"Miter Slots x 2: 3/4" x 3/8"Dustport: 4 Drive: Flat PolygrooveThroat�Plate: Standard + DadoWeight: 550/682 lbsFence storage & push stick incl.
Dual linear guides
Acme threads
DR
O R
ip F
en
ce
DR
O T
iltThe brand�new Elite is our luxury Table Saw, showcasing an array of features like a quick�release riving knife, smooth riding aluminium fence that never touches the table surface, and linear guides that move blade vertical. Digital readout standard for both angle & rip fence, heavy cast�iron base, solid support legs & push stick mounted right on Rip Fence. We invite you to step up to the New Elite.
$2,695.00
CN
C IQ
27
� 1.5KW (2 HP) industrial 3�phase spindle powered with industrial VFD inverter that runs on single phase horse power.
� Remote diagnostic capabilities via Internet connection and home network.
� Multiple machines can be run and moni tored from a single computer, perfect for the one�man shop or a school environ ment, allowing the instructor to monitor several student’s machines.
� Touchscreen is sealed to ip65 rating, dust proof, water�resistant.
� Controller runs off the compact flash, there is no hard drive to fail.
� No Windows means no security issues that could ever affect the controller performance or longivity.
� Industrial PLC controller and touch screen by B &R Automation
� B & R is a 500 million dollar global automation control company with support partners all over the world with complete coverage of the United States and Canada.
� Machine is not PC based so it contains non of the Windows environment issues found from running machinery within Windows.
� Program transfer can be done in the following ways: a) USB stick b) CF flash, built into controller c) home network via hub d) wireless router
� Runs standard G code from any CAM software package.
� Machine can be run by the mounted touch screen, or through a VNC with laptop, netbook home network, iPhone or iPAD.
lagunatools.com
IQ CNC
� Fully supported bearing rails.� German ball screws and ball nut.� Industrial steel frame.� Work envelope 2 X 3 ft.� Z clearance 3 3/4�
IQ S
pecs
IQ S
pecs
� Solid assembly providing flawless cut quality and precision.
� Industrial 3-phase spindle 24,000 rpms 1.5kw.
� Rigid construction means no vibration and lowered noise levels.
$6,495.00Starting at