When Inspection Needs Perfection

A1

Catalogo A1 - 2016_Layout 1 25/03/16 16:31 Pagina 1

A1 concept merges the human into the automatic visual inspection, combining the advantages ofmotion and optics flexibility with the stability of inspection results.

This allows the creation of a “humanlike” equipment with the possibility to vary the framing and totake advantage of the lighting sources that affect the image.

Thanks to a wide set of software tools, including a brand new off-line setup mode to allow the pa-rameters optimization phase completely off-line, the robot is a powerful system very easy to setupand validate.

With its numerous applications, A1 represents the first automatic machine for the inspection ofliquid, freeze-dried and powder products with extremely reduced format change parts.

conc

ept:

over

-prin

t.it

Rev

. 2 ·

03/2

016

A1

Inspected containers: Vials, Ampoules, Cartridges, Syringes, Special Containers

Products to be inspected Waterlike, Suspensions, Oily, Freeze-dried

Container size: Diameter: from 8mm to 95mmHeight: 240 mm

Machine nominal speed: up to 50 pcs/min(3000 pcs/h)

Loading: By trays or in line

Unloading Accepted: By trays or in line

Unloading Rejected: By trays

To be defined according to specific configuration

Particles, fill level and cosmetic inspection

RPV Remote Parameterization & Validation

Manual loading

“Fail safe” reject verification system (Optional)

21 CFR part 11 compliance for electronic records (recipes, batches/sub-batches, audit trail)

Ethernet connection

User friendly interface

In-line connection to upstream and downstream equipments.

Leak Detection available for liquid products (High Voltage)

Leak Detection available for freeze-dried products (Headspace Gas Analyser)

Product colour (Spectrometer)

Product opacity (Opacimeter)

OCR/OCV

BREVETTI C.E.A. SpA

Via del Commercio, 28 - 36050 Sovizzo (VI) ItalyTel. +39 0444.551.988 - Fax +39 0444.536.241www.brevetti-cea.com - info@brevetti-cea.com

Specification subject to change without notice.All rights reserved. The copying of technical data and images is forbidden. © Copyright BREVETTI C.E.A. SpA The information given on this data sheet is accurate as for the date of issue. Nothing here in shall be

deemed to constitute a warranty, explicitly or implicitly. It is the user’s responsibility to determine theapplicability and suitability of such material to any particular purpose.

Catalogo A1 - 2016_Layout 1 25/03/16 16:31 Pagina 2