Accessories Catalogue 2009

www.trabes.it

Company ProfileTRABES is a registered trademark property of TRABES srl. The company was founded with the name of MG srl in 1985by Maurizio Amadori and is devoted to the production of Alu-minium Trusses and Flight Cases.TRABES philosophy is based on the quality and on the reliabi-lity of its products. The company’s technicians choosethe best materials in the most sharp-sighted way. In the same way they focus their attention on details and products fini-shing. Tests and quality controls are rigorous.This is the spirit of our constant improvement which aims at competitiveness and high quality. All these elements led us to the development of the new catalogue of ALUMINIUM TRUS-SES TRABES, which is the result of decades spent working on the entertainment market, side by side with our customers from whom we have learnt how to always provide the right solutions. Services organizers, people who set up theatres and concerts, installers, occasional users, all these categories can find with TRABES the solution to their needs. TRABES sales and technical offices are at your disposal for any doubt or request. Even though this catalogue is technically helpful, TRABES solutions go further more. The research & deve-lopment department, with skilled technicians, analyses any kind of project. There is also a specialized laboratory, where our skilled staff manufactures aluminium structures in unu-sual forms and dimensions. However, unless you contact our experts, it is quite impossible to find out alone all the solutions that come from combining the different elements of the cata-logue, even though it is complete and detailed. It is long time since graphic designers, installers, architects trust TRABES to make their ideas come true. You should try! It has never been easier to manufacture CUSTOM STRUCTURES!

Accessories Catalogue 2009

Steel wire ropes pag. 6

Synthetic fibre rope pag. 7

Ratchet strap belt pag. 8

Fall-prevention equipment pag. 9

Manual hoists and Winches pag. 10

Cable Crossovers: DEFENDER SERIES pag. 12

Rigging Accessories pag. 19

6

STEEL WIRE ROPES

1000 kg

Code desCription

TA 31010 Steel wire rope with redance - 1000 kg L= 1,0 m

TA 31015 Steel wire rope with redance - 1000 kg L= 1,5 m

TA 31020 Steel wire rope with redance - 1000 kg L= 2,0 m

TA 31030 Steel wire rope with redance - 1000 kg L= 3,0 m

TA 31060 Steel wire rope with redance - 1000 kg L= 6,0 m

TA 31090 Steel wire rope with redance - 1000 kg L= 9,0 m

TA 31100 Steel wire rope with redance - 1000 kg L= 10,0 m

TA 31120 Steel wire rope with redance - 1000 kg L= 12,0 m

TA 41010 Sheathed steel wire rope with redance - 1000 kg L= 1,0 m

TA 41015 Sheathed steel wire rope with redance - 1000 kg L= 1,5 m

TA 41020 Sheathed steel wire rope with redance - 1000 kg L= 2,0 m

TA 41030 Sheathed steel wire rope with redance - 1000 kg L= 3,0 m

TA 41060 Sheathed steel wire rope with redance - 1000 kg L= 6,0 m

TA 41090 Sheathed steel wire rope with redance - 1000 kg L= 9,0 m

TA 41100 Sheathed steel wire rope with redance - 1000 kg L= 10,0 m

TA 41120 Sheathed steel wire rope with redance - 1000 kg L= 12,0 m

2000 kg

Code desCription

TA 32010 Steel wire rope with redance - 2000 kg L= 1,0 m

TA 32015 Steel wire rope with redance - 2000 kg L= 1,5 m

TA 32020 Steel wire rope with redance - 2000 kg L= 2,0 m

TA 32030 Steel wire rope with redance - 2000 kg L= 3,0 m

TA 32060 Steel wire rope with redance - 2000 kg L= 6,0 m

TA 32090 Steel wire rope with redance - 2000 kg L= 9,0 m

TA 32100 Steel wire rope with redance - 2000 kg L= 10,0 m

TA 32120 Steel wire rope with redance - 2000 kg L= 12,0 m

TA 42010 Sheathed steel wire rope with redance - 2000 kg L= 1,0 m

TA 42015 Sheathed steel wire rope with redance - 2000 kg L= 1,5 m

TA 42020 Sheathed steel wire rope with redance - 2000 kg L= 2,0 m

TA 42030 Sheathed steel wire rope with redance - 2000 kg L= 3,0 m

TA 42060 Sheathed steel wire rope with redance - 2000 kg L= 6,0 m

TA 42090 Sheathed steel wire rope with redance - 2000 kg L= 9,0 m

TA 42100 Sheathed steel wire rope with redance - 2000 kg L= 10,0 m

TA 42120 Sheathed steel wire rope with redance - 2000 kg L= 12,0 m

Code desCription

TA 21010 Rounded synthetic fibre rope - 1000 kg L= 1,0 m

TA 21020 Rounded synthetic fibre rope - 1000 kg L= 2,0 m

TA 21030 Rounded synthetic fibre rope - 1000 kg L= 3,0 m

TA 21040 Rounded synthetic fibre rope - 1000 kg L= 4,0 m

Steel wire ropes with fibre core, redance and sockets. Available in 4 versions, which are different in terms of loading capacity: 1000 kg and 2000 kg, but also in terms of sheathed item.The transparent sheath helps to immediately recognize the rope features.

7

STEEL WIRE ROPES

Code desCription

TA 21010 Rounded synthetic fibre rope - 1000 kg L= 1,0 m

TA 21020 Rounded synthetic fibre rope - 1000 kg L= 2,0 m

TA 21030 Rounded synthetic fibre rope - 1000 kg L= 3,0 m

TA 21040 Rounded synthetic fibre rope - 1000 kg L= 4,0 m

1000 kg

Code desCription

TA 22010 Rounded synthetic fibre rope - 2000 kg L= 1,0 m

TA 22020 Rounded synthetic fibre rope - 2000 kg L= 2,0 m

TA 22030 Rounded synthetic fibre rope - 2000 kg L= 3,0 m

TA 22040 Rounded synthetic fibre rope - 2000 kg L= 4,0 m

* loeading capacity according to effective working length of each rope.

2000 kg

SyNThETIC FIbRE ROPES

Rounded synthetic fibre ropes, covered by a protective fibre tubular sheath.Light and easy to use, it is very simple to identify each of the different versions, thanks to an accurate label.

8

RATChET STRAP bELT

hEAvy RATChET STRAP bELTFastening system made of 35 mm belt with 2 different parts supplied with metal hooks.

Code desCription

TA 6512 heavy Ratchet strap belt - 5000 kg L=12,0 m

LIGhT RATChET STRAP bELTLight Ratchet strap belt, made of 25 mm belt, whose length is 1 m.

Code desCription

TA 6101 Light Ratchet strap belt -1m

FALL-PREvENTION EQUIPMENT

Sh2 hARNESS It gives the operator a comfortable position. It can be used in a large variety of situations, but very suitable for working suspended. CE branded and compliant with the regulation EN 813.

ChEST hARNESSThe best improvement of the Sh2 harness. They provide the operator with an additional chest fastening point, during rigging works.

Code desCription

TA 6101 SH2 Harness completeTA 6102 Safety cable with snap hook

ADJUSTAbLE SAFETy CAbLE WITh SNAP hOOKAdjustable cable, length 1,2 m up to 1,75 m. With snap hook and safety spring lock on one side, and scaffolding hook on the other.

9

MANUAL hOISTS AND WINChES

Code Load

kgFaLLs Chain

diameter

minimum dimensions

seLF-weight

kgChain

TA 5550 500 1 6 mm 250 mm 7,80 10/9,5 m

TA 55100 500 1 6 mm 287 mm 10,00 10/9,5 m

Code Load

kgtruss width seLF-weight

kg

TA 5510 1000 75-220 mm 4,8

TA 5520 2000 75-220 mm 5,5

MANUAL hOISTSManual hoists whose aim is to help working lifting situations.CE branded. With: galvanized chain compliant with DIN 5684/8 , lower and upper swiveling hooks, chain movement on pulley systems.

TRUSS TOOLSafety coefficient 5:1, very small, needs very few space in vertical position.Suitable for their use on I and h profile, as for lifting hoists.

* Manual hoists are always supplied with chaincontainer bag.

10

11

WIRE LEvER WINChMade of very light die cast alloy, these winches are very strong and reliable.Available on request with metal rope 20 mt length and safety hook.

Code LiFting - tons max puLLing strength - Ton

rope diameter mm

seLF - weight

kg

TA 7008 0,8 1,3 8,5 6

TA 7016 1,6 2,6 11,5 11

TA 7032 3,2 5,2 16,5 22

STRETChERWide range of galvanized stretchers to adjust fastening systems and upwinds .

Code desCription a

mmb

mmC

mmd

inche

mmf

mmg

mmself-weight

kgTA 5201 Stretcher load - 500 kg 416 302 22 3/8” 8 8 13 0,37TA 5202 Stretcher load - 1000 kg 452 338 26 1/2” 10 9,5 16 0,73TA 5203 Stretcher load - 2300 kg 546 432 38 3/4” 16 41 23 1,86

* A B features mean open and closed.

MANUAL hOISTS AND WINChES

12

13

The latest development in the DEFENDER cable crossover series. This cable crossover was developed in collaboration with suppliers for major events. The key feature of this heavy-duty crossover is the two oversized ca-ble/hose ducts for lines up to 120 mm, and for fragile connections and connectors housings not exceeding 100 mm. Load bearing approx. 6 tons per typical tyre imprint (20 cm x 20 cm).

DEFENDER ULTRA LCABLE CROSSOVERS

Code desCription

85600 Defender Ultra L

Length 70,00 cm

width 78,30 cm

height 13,90 cm

ChanneLs 2+2

weight 30,5 kg

452

120 120

783

139 113

776

700

76

14

Together with the industry and leading rental com-panies Adam hall has developed its new flagship of the DEFENDER Series. 5 huge cable ducts - 3 of them are suitable for C-tube hose as used by the fire brigade (62 mm diameter). Power cables also have optimum protection. The load bearing actually surpasses the DEFENDER III at more than 5 tons.

DEFENDER XXL CABLE CROSSOVERS

780

61 62 60 62 61

59 65 63 65 59 61

Code desCription

85500 Defender XXL

Length 70,00 cm

width 69,60 cm

height 8,70 cm

ChanneLs 5

weight 21,4 kg

15

DEFENDER IIICABLE CROSSOVERS

Code desCription

85002 Defender III

Length 100,00 cm

width 60,00 cm

height 7,30 cm

ChanneLs 3

weight 22,0 kg

Adam hall’s topseller. black polyurethane con-struction with textured non-slip surface and highly visible yellow polyurethane lid including three cable ducts. Lid load bearing capacity per typical tyre imprint. Crossover lengths are joined by con-nector plugs, available individually. Each crosso-ver is supplied with one pair of connector plugs. New lid with patented hinge (lid remains attached with cables are laid) and integrated zipper faste-ner, providing better protection from soiling and tearing than traditional velcro fasteners.

600

52 45 56

73

49 50 49

16

In response to numerous customer request: An intermediate system between the DEFEN-DER Compact and the DEFENDER III. This cable crossover features 5 cable channels, moulded connectors and a lower height and lighter weight than the DEFENDER III. The load bearing capacity is similar to that of the DEFENDER III.

89052

942

34

542

36

52

DEFENDER MIDI CABLE CROSSOVERS

Length 89,00 cm

width 54,20 cm

height 5,20 cm

ChanneLs 5

weight 11,5 kg

Code desCription

85300 Defender MIDI

17

DEFENDER MInICABLE CROSSOVERS

290

35 35 35 48

Small but sturdy.Light, professional and universally applicable, with familiar black-yellow design. The DE-FENDER MINI meets every expectation for professional cable protection, expanding the DEFENDER Series with a very light (only 5 kg), compact cable crossover, capable of sup-porting vehicle traffic. Featuring 3 cable ducts and a cable crossover section of 35 mm, with an overall height of 48 mm, although used primarily indoor, this crossover has a load bearing capacity of more than 2 tons.

CABLE CROSSOVERS

Code desCription

85200 Defender MINI

Length 100,00 cm

width 29,00 cm

height 4,80 cm

ChanneLs 3

weight 5,0 kg

18

An unexpensive version of the DEFENDER systems. The arrangement of supports moulded into the bottom allows the DE-FENDER Compact to be laid over a run of cables, supporting the weight of crossing vehicles. black polyurethane cosntruction with ribbed non-slip surface.With the Defender COMPACT base 85103 (optional), the COMPACT cablecrossover becomes more resistant to heavy vehicles and loads.

DEFENDER COMPACT CABLE CROSSOVERS

805

25

830

435 241

29

37 31 23

Code 85100 85103

Length 80,50 cm 80,40 cm

width 43,50 cm 24,10 cm

height 3,70 cm 3,10 cm

ChanneLs 5 5

weight 3,5 kg 3,5 kg

Code desCription

85100 Defender COMPACT85103 Defender COMPACT Base (optional)

804

85100 85103

19

SySTEMSFundamental elements in rigging situation, when fastening systems are required.Available in the versions showed by the figures below.

Code desCription Load

kgweight

kg

TA 8004 Light version section 30 150 1,20

TA 8006 Light version section 25 150 1,00

TA 8007 Light version section 29 150 1,20

TA 8008 Light version section 40 150 1,50

TA 8104 Support with clamps section 30 150 2,30

TA 8106 Support with clamps section 25 150 1,90

TA 8107 Support with clamps section 29 150 2,30

TA 8108 Support with clamps section 40 150 2,60

Sez.

RIGGING SUPPORTvery quick truss rigging system, to be used with chains or wire ropes. Fastened through a shackle (not included).

Code desCription

TA 8029 Rigging support for section 29x29

TA 8030 Rigging support for section 30x30

TA 8040 Rigging support for section 40x40

TA 8056 Rigging support for section 40x56

RIGGING ACCESSORIESCABLE CROSSOVERS

20

ShACKLESFundamental elements in rigging situation, when fastening systems are required. Available in the versions showed by the figures below.

Code desCription a

mm

b

mm

C

mm

d

mm

e

mm

TA 5010 Omega shackle 3/8” load 1000 kg 17,0 10,0 36,5 11,0 26,0

TA 5015 Omega shackle 7/16” load 1500 kg 18,5 11,0 43,0 12,0 29,0

TA 5020 Omega shackle 1/2” load 2000 kg 22,0 13,5 51,0 16,0 32,0

TA 5030 Omega shackle 5/8” load 3250 kg 27,0 16,0 64,0 19,0 43,0

TA 5120 Omega shackle 1/2” load 2000 kg with bolt and R-pin 22,0 13,5 51,0 16,0 32

TA 5130 Omega shackle 5/8” load 3250 kg with bolt and R-pin 27,0 16,0 64,0 19,0 43,0

A

B

C

D

E

STEEL MASTER LINK RINGSStrong steel master links, very useful in rigging situations, to be used with shackles. Available in the versions showed by the figures below.

Code desCription a

mmb

mmC

mmweight

kg

TA 5001 Master link ring - load 1600 kg 110 60 13 0.34

TA 5002 Master link ring - load 2000 kg 110 60 16 0.53

TA 5003 Master link ring - load 3000 kg 135 75 18 0.8

B

C

A

RIGGING ACCESSORIES

21

EyE-NUTAdjustable lifting point. It can be personalized towards the stretching direction. 360 turning degrees.

Code desCritpion a

mmb

mmC

mmd

mme

mmF

mmTA 8010 Female Eye-nut M10 with bolt 10 45 25 25 45 10TA 8012 Female Eye-nut M12 with bolt 12 63 35 35 62 14

RIGGING ACCESSORIES

ALUMINIUM CLAMPS Wide range of clamps compatible to all the different truss series, very good and safe in fastening, TÜV approved.

TRAbES ALUMINIUM CLAMPSNew TRAbES range, carried out with a lighter but strong structure. It is realiable as much as the other line, but unexpensive.

Code desCription Load

kgweight

kgAL 8904 Swiveling coupler 500 0,76

AL 8905 Claw Clamp 250 0,39

AL 8909 Knuckle Joints Coupler - 0,68

AL 8910 half Coupler L= 50 mm 500 0,36

AL 8911 half Coupler L= 30 mm 750 0,36

AL 8913 half coupler with eye-nut 340 0,51

Code desCription Load

kgweight

kgAL 8924 TRAbES Swiveling Coupler 500 0,76

AL 8920 TRAbES half Coupler L= 50 mm 500 0,36

AL 8921 TRAbES half Coupler L= 30 mm 200 0,36

AL 8404 AL 8909

AL 8913AL 8910

AL 8911

AL 8905

RIGGING ACCESSORIES

22

via F.lli Lumière, 1547100 La Selva - Forlì - ItalyTel. +39 0543 783511Fax +39 0543 783550www.trabes.it - info@trabes.it

Made in ItalyTRAbES Srl retains any indisputable right to modify the catalogue and products without any advanced notice.

03-2009