+ All Categories
Home > Documents > Catalogo Alfa Laval

Catalogo Alfa Laval

Date post: 15-Oct-2015
Category:
Upload: raulzamora
View: 214 times
Download: 10 times
Share this document with a friend

of 69

Transcript
  • &+)(

    6;

    6

    &*

    6SHFLILF

    DWLRQ1R

    %RRN1R

    5HY

  • Spare parts catalogue, Reservdelskatalog, Ersatzteilkatalog, Catalogue de pices de rechange, Varaosaluettelo,Catalogue de piezas de recambio, , Catalogo parti di ricambio, Reservedelskatalog,Catalogo de pecas sobressalentes, , Reserveonderdelen-catalogus

    CH/FESX 512S-35CG

    .

    Specification No. 881119-01-03/3Book No. 1271014 02 Rev. 3

  • Published By:Alfa Laval Tumba ABSE-147 80 Tumba, Sweden

    Telephone: +46 8 530 650 00Telefax: +46 8 530 310 40

    Alfa Laval Tumba AB 2010-10-18

    Original instructions

    This publication or any part there of may not bereproduced or transmitted by any process ormeans without prior written permission ofAlfa Laval Tumba AB.

  • Contents

    1 Read this rst 51.1 General information 7

    1.2 Translation list 19

    2 Machine bottom part 222.1 Driving device horizontal 24

    2.2 Worm wheel guard 26

    2.3 Guard 28

    2.4 Driving device vertical 30

    3 Machine top part 323.1 Feed and discharge device SX 34

    4 Separator bowl 36

    5 Separator bowl, ller piecesdensity 1,44 38

    6 Vibration sensor kit 406.1 Junction box 42

    7 Speed sensor kit 44

    8 Set of plates 46

    9 Parts for mounting of motor 48

    10 Cover interlocking kit 50

    11 Nozzle monitor kit 52

    12 Set of tools 54

    3

  • 13 Intermediate service kit 60

    14 Major service kit 62

    15 Servise kit for foundation feet 64

    16 Cross reference list 66

    4

  • 1 Read this first

    1 Read this rst

    The name plate - the guide for finding the correct spare part numbers. See also Warningsin chapter 1.1 General information on page 7.

    Maskinskylten - en guide till det rtta reservdelsnumret. Se ven Varningar i kapitel 1.1Allmn information p sidan 8.

    Das Typenschild - ein Hinweis zur korrekten Ersatzteilnummer. Siehe auch Warnhinweisein Kapitel 1.1 Allgemeine Informationen auf Seite 9.

    La plaque de la machine - un guide pour trouver le numro de pice de rechange correct.Voir ce propos les mises en garde du chapitre 1.1 Informations gnrales en page 10.

    La placa-marca de la mquina - gua del nmero correcto del repuesto. Consulte tambinlas Advertencias del captulo 1.1 Informacin General en la pgina 11.

    . . 1.1 12.La targhetta della macchina - guida al corretto numero dei ricambi. Vedere anche leAvvertenze nel capitolo 1.1 Informazioni generali a pagina 13.

    A placa do fabricante da mquina - um guia do nmero correto das partes sobressalentes.Consultar tambm os Avisos no captulo Informao Geral 1.1 da pgina 14.

    Konekilpi - opastin oikeaan varaosanumeroon. Katso mys kappaleessa 1.1 sivulla 15olevaa kohtaa Yleiset tiedot .

    . "1.1 ", 16.Het gegevensplaatje - een wegwijzer naar het juiste onderdeelnummer. Zie ookWaarschuwingen in hoofdstuk 1.1 Algemene informatie, op blz. 17.

    first Typeskiltet - en guide til det rette reservedelsnummer. Se ogs under Advarsler ikapitel 1.1 Generelle oplysninger p side 18.

    5

  • 1 Read this first

    6

  • 1.1 General information 1 Read this first

    1.1 General information

    Safeguard your commitment to quality by always using genuineAlfa Laval spare parts.

    Remember, Alfa Laval cannot accept responsibility for thefailure of separator equipped with non-original spare parts. Weguarantee the quality and reliability of our products.

    XXXXXXWARNING B

    When changing certain parts in the separator bowl assembly,the vibration level may increase. This can result in shorter lifetime of components like rolling bearings and gears. If severeunbalance occurs, the rotating bowl assembly can come intocontact with the frame causing damage to equipment and injuriesto personnel. It is strongly recommended that the exchange ofparts is supervised by an Alfa Laval service engineer. AlfaLaval assumes no liability for damage to property or injury topersonnel resulting from unauthorized installation of those parts.

    XXXXXXWARNING C

    Certain bowl parts carry milling marks from the balancing of thecomplete separator bowl. These parts must not be replacedwithout rebalancing the complete bowl. The rebalancing shouldbe made by an Alfa Laval service shop.

    7

  • CH/FESX 512S-35CG

    Flj ditt kvalitetstnkande genom att endast anvnda Alfa Lavaloriginalreservdelar.

    Kom ihg att Alfa Laval inte tar ngot ansvar fr fel p enseparator som innehller icke-originaldelar. Vi garanterarkvaliteten och driftskerheten hos vra egna produkter.

    XXXXXXVARNING B

    Om vissa delar i separatorkulan byts ut, kan vibrationsnivnkomma att ka. Detta kan i sin tur leda till frkortad livslngdp t.ex. lager och vxlar. Om kraftiga vibrationer uppstr, kanden roterande kulan komma att sl i stativets delar, vilket kanmedfra allvarlig maskin- och personskada. Det r drfr av storvikt att utbyte av kulans delar vervakas av en serviceingenjrfrn Alfa Laval. Alfa Laval tar inget ansvar fr maskin- ellerpersonskador som kan uppkomma p grund av att delar bytts utav icke auktoriserad personal.

    XXXXXXVARNING C

    Vissa av separatorkulans delar har urfrsta spr som resultatav balansering av hela kulan. Dessa delar kan inte bytas ututan att en ombalansering av kulan grs. Fr att bsta resultatska uppns, ska den kompletta kulan sndas till en Alfa Lavalserviceverkstad fr ombalansering.

    8

  • 1.1 General information 1 Read this first

    Sichern Sie sich Ihren Anspruch auf Qualitt durchausschlieliche Verwendung von original Alfa LavalErsatzteilen.

    Beachten Sie bitte, da Alfa Laval keine Verantwortung fr denAusfall eines Separators bernimmt, der mit Nicht-Originalteilenausgestattet ist. Wir garantieren fr die Qualitt undZuverlssigkeit unserer Produkte.

    XXXXXXWARNUNG B

    Durch den Austausch bestimmter Teile in der Separatortrommel-Baugruppe, kann ihr Schwingungspegel steigen. Dieskann zu einer krzeren Lebensdauer von Teilen, wie z.B.Wlzlagern und Getrieben, fhren. Bei einer schwerenUnwucht kann die rotierende Trommelbaugruppe in Kontaktmit dem Gestell kommen, was zu Beschdigungen derAusrstung oder Personenverletzungen fhren kann. Es wirddringend empfohlen, den Austausch von einem Alfa LavalService-Ingenieur beaufsichtigen zu lassen. Alfa Lavalbernimmt keine Haftung fr eine Gertebeschdigung oderPersonenverletzung aufgrund einer ungenehmigten Montagedieser Teile.

    XXXXXXWARNUNG C

    Bestimmte Trommelteile haben Frsmarken vom Auswuchtender kompletten Separatortrommel. Diese Teile drfen nicht ohneeine Neuauswuchtung der kompletten Trommel ausgetauschtwerden. Die Neuauswuchtung sollte in einer Alfa LavalService-werkstatt erfolgen.

    9

  • CH/FESX 512S-35CG

    Respectez votre engagement de qualit en utilisant toujoursdes pices de rechange dorigine Alfa Laval.

    Attention, Alfa Laval dcline toute responsabilit en cas depanne dun sparateur quip de pices de rechange qui nesont pas dorigine. Nous garantissons la qualit et la fiabilit denos produits.

    XXXXXXAVERTISSEMENT B

    Le remplacement de certaines pices du bol du sparateurrisque daugmenter le niveau de vibrations, et donc de rduire ladure de vie des composants tels que les paliers roulementset les engrenages. En cas de dsquilibre trop important, lebol en rotation risque dentrer en contact avec des pices dubti, provoquant ainsi des dtriorations de lquipement etdes blessures du personnel. Nous vous incitons fortement faire raliser le remplacement sous la surveillance duntechnicien de maintenance Alfa Laval. Alfa Laval nassumeaucune responsabilit en cas de dtrioration du matriel ou deblessure du personnel rsultant dune installation non approuvede ces pices.

    XXXXXXAVERTISSEMENT C

    Certaines pices du bol prsentent des marques de reprageeffectues lors de lquilibrage du bol du sparateur. Il ne fautpas remplacer ces pices sans avoir au pralable procd unnouvel quilibrage de lensemble du bol. Cet quilibrage doittre ralis dans un atelier de rparation Alfa Laval.

    10

  • 1.1 General information 1 Read this first

    Proteja su compromiso con la calidad utilizando siemprerepuestos originales Alfa Laval.

    Recuerde que Alfa Laval no acepta ninguna responsabilidadpor el fallo de una separadora equipada con repuestos nooriginales. Alfa Laval garantiza la calidad y la fiabilidad de susproductos.

    XXXXXXADVERTENCIA B

    Cuando se cambian ciertas piezas del conjunto del rotorde la separadora, puede que se produzca un aumento delnivel de vibraciones, lo que puede provocar un desgaste dealgunos componentes, como los rodamientos de rodillos y losengranajes. Si se produce un desequilibrado importante, elconjunto del rotor en movimiento puede rozar con el bastidor,causando serios daos al equipo y al personal. Se recomiendaencarecidamente que el cambio sea supervisado por untcnico de mantenimiento de Alfa Laval. Alfa Laval no sehace responsable de los daos materiales o daos personalesprovocados por la instalacin no autorizada de esas piezas.

    XXXXXXADVERTENCIA C

    Algunas piezas del rotor llevan marcas estampadas para elequilibrado del rotor completo de la separadora. Siempre quese cambien estas piezas se debe equilibrar de nuevo todo elrotor, operacin que debe ser realizada por un experto de uncentro de servicio Alfa Laval.

    11

  • CH/FESX 512S-35CG

    Alfa Laval.

    : Alfa Laval , . .

    XXXXXX B

    . , . , , . , Alfa Laval. lfa Laval .

    XXXXXX C

    . . Alfa Laval.

    12

  • 1.1 General information 1 Read this first

    Salvaguardate la qualit del vostro separatore utilizzandosempre ricambi originali Alfa Laval.

    Ricordate che la Alfa Laval non accetta alcuna responsabilitin caso di difetti al separatore dovuti allutilizzo di ricambi nonoriginali. La Alfa Laval garantisce la qualit e laffidabilitesclusivamente dei propri prodotti.

    XXXXXXAVVERTENZA B

    In seguito alla sostituzione di alcune parti del tamburo delseparatore, il livello di vibrazioni pu aumentare. Questo pucomportare la riduzione della vita utile di componenti qualicuscinetti a rulli ed ingranaggi. In caso di elevato spostamento, iltamburo pu entrare a contatto con le parti del telaio provocandoseri danni allattrezzatura e lesioni alle persone. Si raccomandacaldamente di far controllare la sostituzione da un tecnicodi assistenza Alfa Laval. La Alfa Laval non assume alcunaresponsabilit per danni alle cose o lesioni al personale dovutiallinstallazione non autorizzata delle suddette parti.

    XXXXXXAVVERTENZA C

    Alcune parti del tamburo dipendono dal bilanciamentocomplessivo del tamburo del separatore. Le suddette partinon possono essere sostituite senza procedere ad un nuovobilanciamento. Per ottenere i migliori risultati, rivolgersi ad uncentro assistenza Alfa Laval per il ribilanciamento dellinterogruppo.

    13

  • CH/FESX 512S-35CG

    Preserve o seu compromisso com a qualidade utilizandosempre peas originais Alfa Laval.

    No se esquea de que a Alfa Laval no assume quaisquerresponsabilidades pela avaria dum separador que no estejaequipado com peas originais. Por isso, asseguramos agarantia da qualidade e fiabilidade dos nossos produtos.

    XXXXXXAVISO B

    Ao mudar determinadas peas no conjunto do rotor daseparadora, poder provocar um aumento da vibrao.Tal poder originar a reduo do tempo de durao doscomponentes, tais como rolamentos de roletes e engrenagens.Caso se verifique um desequilbrio acentuado, o conjunto dorotor giratrio poder entrar em contacto com a estrutura, vindoa provocar danos no equipamento e ferimentos pessoais.Recomenda-se vivamente que a substituio de peas sejavistoriada por um tcncico de servio da Alfa Laval. A AlfaLaval no assume qualquer responsabilidade por danos embens ou ferimentos pessoais resultantes da instalao noautorizada daquelas peas.

    XXXXXXAVISO C

    Determinadas partes do rotor contm marcas de atrito dobalanceamento do rotor do separador completo. Estas peasno devem ser substitudas sem reequilibrar o rotor completo.O reequilibro deve ser executado por uma centro de assistnciaAlfa Laval.

    14

  • 1.1 General information 1 Read this first

    Varmista kyttmiesi tuotteiden laatu kyttmll aina aitoja jaalkuperisi Alfa Laval -varaosia.

    Muista, ettei Alfa Laval voi vastata sellaisen separaattorintoimintahirist, jossa on kytetty muita kuin alkuperisivaraosia. Me takaamme omien tuotteidemme laadun jaluotettavuuden.

    XXXXXXVAROITUS B

    Kun separaattorin kuula-asennelman tiettyj osia vaihdetaan,sen trinn taso voi kasvaa. Tm voi johtaa joidenkin osien,kuten vierintlaakereiden ja hammasvaihteiden, kyttinlyhenemiseen. Jos asennelma joutuu pahasti eptasapainoon,pyriv kuula-asennelma voi koskettaa runkoa ja aiheuttaalaite- ja henkilvahinkoja. Suosittelemme, ett Alfa Lavalinhuoltoinsinri valvoo vaihtoa. Alfa Laval ei ota vastuutaomaisuudelle tai henkilkunnalle aiheutuneista vahingoista,mikli ne johtuvat niden osien vrin suoritetusta asennuksesta.

    XXXXXXVAROITUS C

    Tietyiss kuulan osissa on merkinnt koko separaattorikuulantasapainotuksesta. Nit osia ei saa vaihtaa ilman, ett kokokuula tasapainotetaan. Tasapainotus on annettava Alfa Laval -korjaamon hoidettavaksi.

    15

  • CH/FESX 512S-35CG

    Alfa Laval. Alfa Laval . .

    XXXXXX B

    , . , . , , . AlfaLaval. Alfa Laval .

    XXXXXX C

    . . Alfa Laval.

    16

  • 1.1 General information 1 Read this first

    Doe geen concessies aan kwaliteit en gebruik altijd origineleAlfa Laval-reserveonderdelen.

    Wij wijzen u erop, dat Alfa Laval geen verantwoordelijkheid kanaanvaarden voor defecten aan een separator die is uitgerustmet nietoriginele reserveonderdelen. Wij garanderen dekwaliteit en de betrouwbaarheid van onze producten.

    XXXXXXWAARSCHUWING B

    Als er bepaalde onderdelen van de separatortrommel wordenvervangen, kan het trillingsniveau veranderen. Dit kan leidentot een verkorte levensduur van onderdelen als rollagersen tandwielen. Als er sprake is van een ernstige mate vanonbalans, kan de roterende trommel in contact komen met hetframe, wat kan leiden tot ernstige schade aan goederen of totpersoonlijk letsel. Het is dan ook ten sterkste aan te radenom onderdelen te laten vervangen onder supervisie van eenonderhoudstechnicus van Alfa Laval. Alfa Laval aanvaardtgeen enkele aansprakelijkheid voor schade aan goederen ofpersoonlijk letsel als gevolg van onoordeelkundige installatievan die onderdelen.

    XXXXXXWAARSCHUWING C

    Op bepaalde onderdelen van de trommel zitten freesmarkeringenvan het uitbalanceren van de gehele separatortrommel. Dezeonderdelen mogen niet worden vervangen zonder dat degehele trommel opnieuw wordt uitgebalanceerd. Het opnieuwuitbalanceren moet gebeuren in een onderhoudswerkplaats vanAlfa Laval.

    17

  • CH/FESX 512S-35CG

    Beskyt din investering i kvalitet ved altid at anvende originalereservedele fra Alfa Laval.

    Husk at Alfa Laval ptager sig intet ansvar for fejl i separatorer,der er udstyret med uoriginale reservedele. Vi indestr for voreprodukters kvalitet og driftssikkerhed.

    XXXXXXADVARSEL B

    Ved udskiftning af visse dele i separatorkuglen, kanvibrationsniveauet blive forget. Dette kan forkorte levetiden forkomponenter som kuglelejer og tandhjul. I tilflde af kraftigevibrationer kan den roterende separatorkugle komme i kontaktmed rammedele, hvilket kan medfre alvorlig beskadigelseaf udstyr og personskade. Det anbefales p det kraftigste,at udskiftningen sker under tilsyn af en servicetekniker fraAlfa Laval. Alfa Laval ptager sig intet ansvar for ting- ellerpersonskade som flge af ikke-autoriseret montering af dissedele.

    XXXXXXADVARSEL C

    Visse kugledele er forsynet med mrker fra afbalanceringen afden samlede separatorkugle. Ved udskiftning af disse dele skalder foretages en ny afbalancering af den samlede kugleenhed.Afbalanceringen br foretages af et Alfa Laval-servicecenter.

    18

  • 1.2 Translation list 1 Read this first

    1.2 Translation list

    versttningslistabersetzungslisteListe de traductionLista de traducciones

    Part no. Reservdelsnummer Teil-Nr. Numro de pice Pieza No.

    Qty Antal Anzahl Quantit Cantidad

    Description Benmning Bezeichnung Dnomination Descripcin

    Notes Anmrkningar Anmerkungen Remarques Notas

    Machine type Maskintyp Maschinentyp Type de machine Tipo de mquina

    Product no. Produktnr Produktnummer Numro de produit Nmero de producto

    Machine unit description Maskinblocksbenmning Bezeichnung des

    Maschinenblocks

    Dnomination de partie

    de machine

    Descripcin de seccin de

    la mquina

    Machine unit no. Maskinblocksnr Maschinenblock Nr. Partie de machine n No. de seccin de

    mquina

    Subassembly description Undergruppsbenmning Bezeichung der

    Untergruppe

    Dnomination de

    sous-ensemble

    Descripcin de

    subconjunto

    Subassembly no. Undergruppsnr Untergruppe Nr. N de sous-ensemble Nmero de subconjunto

    See page Se sidan Siehe Seite Vir page Vase la pgina

    Fig. ref. Figurhnvisning Bildhinweise Rf. de fig. Referencia de figura

    Product name Produktnamn Produktname Nom du produit Nombre del producto

    Exchange necessitates

    rebalancing of bowl

    Utbyte ndvndiggr

    ombalansering av kulan

    Austausch erfordert

    Wiederauswuchtung der

    Trommel

    Le remplacement

    ncessite le rquilibrage

    du bol

    El racmbio requiere el

    reequilibrado del rotor

    See separate spare parts

    list

    Se separat reservdelslista Siehe separate

    Ersatzteilliste

    Voir liste spare des

    pices de rechange

    Vase la lista de piezas

    separada

    Not delivered as spare

    part

    Levereras ej som

    reservdel

    Nicht als Ersatzteil

    geliefert

    Non livr comme pice de

    rechange

    No se entrega como pieza

    de recambio

    19

  • CH/FESX 512S-35CG

    Lista traduzioniLista para traduoKnnsluttelo

    Part no. Nr. parte Numero de peca Varaosanumero

    Qty Quantita Quantidade Lukumr

    Description Descrizione Descricao Nimitys

    Notes Note Notas Huomautuksia

    Machine type Tipo macchina Tipo de maquina Konetyyppi

    Product no. Nr.prodotto No. do produto Tuotteen no

    Machine unit description

    Descrizione unita

    macchina

    Descricao da unidade da

    maquina

    Koneenosan nimitys

    Machine unit no. Nr. unita macchina Numero de unidade damaquina

    Koneenosan no

    Subassembly description Descrizione sottogruppo Descriao do subconjunto Alaryhmn nimitys

    Subassembly no. Nr. sottogruppo Nmero de subconjunto Alaryhmn no

    See page . Vedi pagina Vase la pgina Ks sivu

    Fig. ref. Rif. fig. Referencia de figura Kuvaviite

    Product name Nome prodotto Nombre del producto Tuotteen nimi

    Exchange necessitates

    rebalancing of bowl

    La sostituzione comporta

    la equilibratura del

    tamburo

    El racmbio requiere el

    reequilibrado del rotor

    Vaihdettaessa kuula

    tasapainoitettava

    uudelleen

    See separate spare parts

    list

    .

    Vedi lista separata delle

    parti di ricambio

    Vase la lista de piezas

    separada

    Katso erillist

    varaosaluetteloa

    Not delivered as spare

    part

    Non fornito come parte di

    ricambio

    No se entrega como pieza

    de recambio

    Ei toimiteta varaosana

    20

  • 1.2 Translation list 1 Read this first

    VertaallijstOversttelseliste

    Part no. Onderdeelnr. Reservedelsnummer

    Qty Hoeveelheid Antal

    Description Beschrijving Betegnelse

    Notes Opmerkingen Bemaerkninger

    Machine type Machinetype Maskintype

    Product no. Produktnr. Produktnr.

    Machine unit description

    Machineblokbenaming Maskinbetegnelse

    Machine unit no.

    Machineblokbenamning Maskinnr.

    Subassembly description Subgroepbenamning Undergruppsbetegnelse

    Subassembly no. Subgroepnr. Undergruppenr.

    See page Zie blz. Se side

    Fig. ref. Afb. ref. Figurhenvisning

    Product name Produktnaam Produktnavn

    Exchange necessitates

    rebalancing of bowl

    Vervangning vereist

    herbalanceren van de kogel

    Udskriftning kraever

    afbalcering af kuglen

    See separate spare parts list

    Vervangning vereist van de

    kogel

    Se spaat reservedelsliste

    Not delivered as spare part

    Niet geleverd als

    reserveonderdeel

    Levereres ikke som reservedel

    21

  • CH/FESX 512S-35CG

    2 Machine bottom part

    Machine unit number or

    Subassembly description

    549996-Ref Part No Description -27 -28 Notes

    QuantityWith mechanical brake 50 Hz With mechanical brake 60 Hz

    1 549995 01 Frame bottom part 1 12 35607 Gasket 1 13 62467 Drain screw 1 14 38967 Gasket 1 15 61899 Screen 1 16 38967 Gasket 1 17 38685 Glass disc 1 18 37167 Rectangular ring 1 19 65457 Fixing plate 1 1

    10 221131 09 Screw 3 311 546456 86 Driving device horizontal 1 See page 2411 546456 87 Driving device horizontal 1 See page 2412 43626 Gasket 1 113 544615 81 Bearing shield 1 1

    13A 545063 03 Tolerance ring 1 114 223101 61 Washer 8 815 221041 01 Screw 8 816 222111 95 Cylindrical pin 2 217 65220 Gasket 1 118 544017 80 Worm wheel guard 1 1 See page 2619 223101 61 Washer 6 620 221041 01 Screw 6 621 544791 80 Guard 1 1 See page 2822 223101 61 Washer 4 423 221041 01 Screw 4 424 546608 80 Driving device vertical 1 See page 3024 546608 81 Driving device vertical 1 See page 3025 221041 22 Screw 1 126 549993 80 Bracket 1 127 549993 81 Bracket 1 128 221041 20 Screw 4 429 223101 61 Washer 4 430 549997 01 Protecting sheet 1 131 260254 02 Screw 2 235 70700 Grating 1 136 221131 03 Screw 4 440 548367 01 Holder 1 141 221721 37 Screw 2 242 546846 81 Cooling coil 1 143 73665 Rectangular ring 4 444 223101 37 Washer 2 245 526343 03 Nut 2 2

    22

  • 2 Machine bottom part

    11

    49

    O

    23

  • CH/FESX 512S-35CG

    2.1 Driving device horizontal

    Machine unit number or

    Subassembly description

    546456-Ref Part No Description -86 -87 Notes

    Quantity50 Hz 60 Hz

    1 544787 01 Bearing housing 1 12 544320 01 Round nut 1 13 546424 80 Worm wheel shaft 1 14 233211 94 Ball bearing 1 15 67478 Round nut 1 16 544789 01 Lock ring 1 17 545803 89 Worm wheel 17 545803 90 Worm wheel 1

    7A 545705 02 Nave 1 17B 545704 01 Buffer 6 67C 545703 01 Sleeve 6 67D 545706 01 Ring 1 17E 221035 62 Hexagon head screw 6 67F 545725 11 Gear rim 17F 545725 13 Gear rim 18 541988 01 Clamp element 1 1

    8A 221035 61 Hexagon head screw 12 pcs9 8379 Ball bearing 1 1

    10 223610 32 Flat key 1 111 541991 01 Washer 1 112 223107 28 Spring washer 1 113 260001 39 Screw 1 1

    24

  • 2.1 Driving device horizontal 2 Machine bottom part

    00

    85

    T

    25

  • CH/FESX 512S-35CG

    2.2 Worm wheel guard

    Machine unit number or

    Subassembly description

    544017-Ref Part No Description -80 Notes

    Quantity1 543996 02 Worm wheel guard 12 70321 Bushing 13 221581 06 Hexagon socket set screw 14 38710 Seal ring 15 71130 Revolution counter shaft 16 69211 Stop ring 17 69212 Slotted pin 18 69214 Gear wheel 19 69226 Taper pin 1

    10 38324 Gasket 111 526686 02 Plug 1

    26

  • 2.2 Worm wheel guard 2 Machine bottom part

    06

    13

    A

    27

  • CH/FESX 512S-35CG

    2.3 Guard

    Machine unit number or

    Subassembly description

    544791-Ref Part No Description -80 Notes

    Quantity1 544784 80 Guard 12 537602 85 Brake shoe 1

    2A 310637 84 Friction pad 13 546791 02 Handle 14 65461 Spindle 15 70695 Spring 16 39098 Cylindrical pin 17 8199 Split pin 18 67960 Slotted pin 1

    28

  • 2.3 Guard 2 Machine bottom part

    05

    99

    F

    29

  • CH/FESX 512S-35CG

    2.4 Driving device vertical

    Machine unit number or

    Subassembly description

    546608-Ref Part No Description -80 -81 Notes

    Quantity50 Hz 60 Hz

    1 519330 01 Bottom bearing housing 1 12 38411 O-ring 1 14 221041 20 Screw 6 65 546427 02 Bowl spindle 1 16 546585 01 Worm 16 546585 03 Worm 17 548051 11 Ball bearing 1 18 71971 Spacing sleeve 1 19 71972 Spring 1 1

    10 548051 11 Ball bearing 1 111 66313 Lock washer 1 112 66312 Round nut 1 113 71973 Conveyor 1 114 548746 04 Ball bearing 1 115 73988 Washer 1 116 66076 Lock washer 1 117 67476 Round nut 1 118 546661 01 Gasket 1 119 519637 03 Spring casing 1 120 70708 Buffer 1 1

    20A 70710 Wear ring 1 120B 70340 Spring 12 1220C 70709 Spring support 1 120D 16435 Split pin 2 221 70711 Ball bearing housing 1 122 548745 01 Ball bearing 1 123 70712 Spacing sleeve 1 124 70713 Spring support 1 125 70714 Spring 6 626 70713 Spring support 1 127 548747 03 Ball bearing 1 128 70716 Lock ring 1 129 516382 02 Oil fan 1 130 70346 Buffer 6 631 66191 Spring 6 632 70347 Screw plug 6 633 532348 02 Stud bolt 6 634 546661 02 Gasket 1 135 532949 02 Cover for spring housing 1 136 221803 33 Nut 6 637 64104 O-ring 1 138 70830 Guard 1 139 2211724 23 Screw 6 640 70720 Protecting collar 1 141 65201 O-ring 1 142 74491 Protecting plate 1 143 74396 Screw 3 3

    30

  • 2.4 Driving device vertical 2 Machine bottom part

    70

    9D

    31

  • CH/FESX 512S-35CG

    3 Machine top part

    Paring disc 15 x 135 mm

    Machine unit number or

    Subassembly description

    546587-Ref Part No Description -33 Notes

    Quantity1 546158 82 Frame top part 1

    1A 223406 26 O-ring 11B 547562 01 Blind flange 11C 221716 09 Screw 22 221731 04 Screw 63 67566 O-ring 14 519232 80 Ventilation hood 15 37904 Gasket 36 519272 02 Screw 37 67811 O-ring 18 537299 87 Hook screw 129 221803 40 Nut 12

    10 521939 81 Leading-off screen 111 543373 80 Frame hood 112 2210948 34 Screw 413 546833 01 Gasket 514 546442 82 Feed and discharge device SX 1 See page 3415 260202 04 Stud bolt 1216 223101 61 Washer 1217 221851 11 Cap nut 1218 530175 80 Outlet piece 119 516107 02 Packing 120 527151 80 Stirrup 121 523348 01 Screw 422 538157 01 Screw 1

    32

  • 3 Machine top part

    07

    06

    E

    33

  • CH/FESX 512S-35CG

    3.1 Feed and discharge device SX

    Machine unit number or

    Subassembly description

    546442-Ref Part No Description -82 Notes

    Quantity1 537474 85 Paring disc 12 67813 O-ring 13 543376 80 Discharge housing 14 223412 16 O-ring 15 537758 80 Nut 1

    5A 74567 Slotted pin 36 190605 Rectangular ring 17 537760 02 Inlet bend 1

    10 14238 O-ring 113 190605 Rectangular ring 114 190998 Sleeve 115 190617 Coupling nut 116 190605 Rectangular ring 117 190998 Sleeve 118 190617 Coupling nut 122 190086 Covering washer 123 190615 Coupling nut 1

    34

  • 3.1 Feed and discharge device SX 3 Machine top part

    5A

    12

    77

    B

    35

  • CH/FESX 512S-35CG

    4 Separator bowl

    Machine unit number or

    Subassembly description

    537865-Ref Part No Description -95 -96 -99 -01 Notes

    QuantityCaulks 0,5 mm Caulks 1,0 mm Caulks 0,5 mm Caulks 1,0 mm

    1 549471 03 Bowl body 1 1 C1 549471 81 Bowl body 1 1 C

    1.1 537907 01 Cap nut 1 1 1 12 536280 01 Bushing 12 12 12 123 67032 O-ring 12 12 12 124 538108 80 Distributor 1 1 1 1 B5 536534 84 Bottom disc 1 15 536534 93 Bowl disc 1 16 515640 95 Bowl disc 127 1276 536534 92 Bowl disc 85 857 515640 95 Bowl disc 2 27 536534 92 Bowl disc 2 28 540459 04 Bowl hood 1 1 1 1 C9 39099 O-ring 1 1 1 1

    10 519640 02 Lock ring 1 1 1 1 B11 72546 Cover 1 1 1 112 67814 O-ring 1 1 1 113 72547 Lock ring 1 1 1 114 549470 83 Outlet nozzle 0,70 mm 14 14 14 1414 549470 84 Outlet nozzle 0,80 mm 14 14 14 1414 549470 85 Outlet nozzle 0,90 mm 14 14 14 1414 549470 86 Outlet nozzle 1,00 mm 14 14 14 1414 549470 87 Outlet nozzle 1,15 mm 14 14 14 1414 549470 88 Outlet nozzle 1,30 mm 14 14 14 1414 549470 89 Outlet nozzle 1,45 mm 14 14 14 1414 549470 90 Outlet nozzle 1,60 mm 14 14 14 1414 549470 91 Outlet nozzle 1,80 mm 14 14 14 1414 549470 92 Outlet nozzle 2,00 mm 14 14 14 1414 549470 93 Outlet nozzle 2,25 mm 14 14 14 14

    14A 39518 Gasket 1 1 1 115 71244 Plug 6 6 6 6

    15A 39518 Gasket 1 1 1 1

    36

  • 4 Separator bowl

    70

    8K

    37

  • CH/FESX 512S-35CG

    5 Separator bowl, ller pieces density 1,44

    Machine unit number or

    Subassembly description

    537865-Ref Part No Description -97 -98 -02 -03 Notes

    QuantityCaulks 0,5 mm Caulks 1,0 mm Caulks 0,5 mm Caulks 1,0 mm

    1 549471 01 Bowl body 1 1 C1 549471 80 Bowl body 1 1 C

    1.1 537907 01 Cap nut 1 1 1 12 536280 01 Bushing 12 12 12 123 67032 O-ring 12 12 12 124 538108 80 Distributor 1 1 1 1 B5 536534 84 Bottom disc 1 15 536534 93 Bowl disc 1 16 515640 95 Bowl disc 127 1276 536534 92 Bowl disc 85 857 515640 95 Bowl disc 2 27 536534 92 Bowl disc 2 28 540459 04 Bowl hood 1 1 1 1 C9 39099 O-ring 1 1 1 1

    10 519640 02 Lock ring 1 1 1 1 B11 72546 Cover 1 1 1 112 67814 O-ring 1 1 1 113 72547 Lock ring 1 1 1 114 549470 83 Outlet nozzle 0,70 mm 14 14 14 1414 549470 84 Outlet nozzle 0,80 mm 14 14 14 1414 549470 85 Outlet nozzle 0,90 mm 14 14 14 1414 549470 86 Outlet nozzle 1,00 mm 14 14 14 1414 549470 87 Outlet nozzle 1,15 mm 14 14 14 1414 549470 88 Outlet nozzle 1,30 mm 14 14 14 1414 549470 89 Outlet nozzle 1,45 mm 14 14 14 1414 549470 90 Outlet nozzle 1,60 mm 14 14 14 1414 549470 91 Outlet nozzle 1,80 mm 14 14 14 1414 549470 92 Outlet nozzle 2,00 mm 14 14 14 1414 549470 93 Outlet nozzle 2,25 mm 14 14 14 14

    14A 39518 Gasket 1 1 1 115 71244 Plug 6 6 6 6

    15A 39518 Gasket 1 1 1 116 549472 02 Filler piece 12 12 12 12

    16.1 39518 Gasket 12 12 12 1216.2 221041 01 Screw 12 12 12 12

    38

  • 5 Separator bowl, filler pieces density 1,44

    07

    08

    L

    39

  • CH/FESX 512S-35CG

    6 Vibration sensor kit

    Including connection box

    Machine unit number or

    Subassembly description

    553652-Ref Part No Description -03 Notes

    Quantity1 260080 15 Hexagon socket set screw 12 223132 04 Washer 23 552158 02 Vibration sensor 14 552870 48 Tube gland, straight 15 552870 61 Compression gland 16 552869 13 Protective tube 17 221121 46 Screw 28 552869 93 Tube clip 29 552845 62 Junction box 1 See page 42

    10 221126 56 Screw 411 554627 02 Shrinking tubing 112 560311 01 Cable gland 199 560310 01 Torid core 1 See Interconnection diagram

    40

  • 6 Vibration sensor kit

    12

    51

    C

    41

  • CH/FESX 512S-35CG

    6.1 Junction box

    Machine unit number or

    Subassembly description

    552845-Ref Part No Description -62 Notes

    Quantity1 554789 01 Box, drilled and tapped 12 550127 50 Earth bar 13 552738 08 Terminal row 1

    3A 221125 20 Screw 24 221803 26 Nut 45 552593 05 Lock washer 66 550532 25 Distance screw 27 221121 48 Screw 48 552851 02 Stopping plug 109 552851 05 Stopping plug 6

    10 552851 06 Stopping plug 2

    42

  • 6.1 Junction box 6 Vibration sensor kit

    12

    12

    B

    43

  • CH/FESX 512S-35CG

    7 Speed sensor kit

    With speed sensor only

    Machine unit number or

    Subassembly description

    554795-Ref Part No Description -01 Notes

    Quantity1 552042 01 Inductive sensor 12 552870 90 Tube adapter, straight 13 552870 61 Compression gland 14 552869 11 Protective tube 15 552852 03 Cable gland 16 554627 02 Shrinking tubing 17 560311 01 Cable gland 1

    44

  • 7 Speed sensor kit

    12

    51

    Q

    45

  • CH/FESX 512S-35CG

    8 Set of plates

    Machine unit number or

    Subassembly description

    549572-Ref Part No Description -32 Notes

    Quantity3 1270019 Set of safety labels 1

    3A 1270018 01 Safety label sv 13B 1270018 02 Safety label en 13C 1270018 03 Safety label de 13D 1270018 04 Safety label fr 13E 1270018 05 Safety label es 13F 1270018 06 Safety label ru 13G 1270018 07 Safety label it 13H 1270018 08 Safety label pt 13I 1270018 09 Safety label pl 13J 1270018 10 Safety label el 13K 1270018 11 Safety label fi 13L 1270018 12 Safety label zh 13M 1270018 13 Safety label da 13N 1270018 14 Safety label ar 13O 1270018 15 Safety label nl 13P 1270018 16 Safety label cs 13Q 1270018 17 Safety label ja 13R 1270018 18 Safety label ko 13S 1270018 19 Safety label no 14 956264 13 Name sign 15 52406 Plate with arrow 16 66169 Drive screw 27 553171 01 Label 50 Hz 17 553272 01 Label 60 Hz 18 1270001 Lifting instruction 19 554214 02 Cable tie 1

    10 1270006 Warning signs 110A 1270002 02 Warning nozzle separator 1

    46

  • 8 Set of plates

    1 2 3,3A-S

    4 5 6

    7

    10

    8

    9

    1. 2.

    FI GR

    FR

    SE

    DK

    NL

    GB

    DE

    IT

    ES

    RU

    Lsinstruktionsmanualen, inden separatorenlftes op.

    Lue kyttohjeet ennen nostamista.Lue kyttohjeet ennen nostamista.

    Art. No. 1270001 Rev. 2

    Lea el manual de instrucciones antes de levantarla separadora.

    Prima di sollevare il separatore, leggere il ma-nuale distruzione.

    Vor dem Heben immer erst Anleitungen im Hand-buch lesen!

    Read instruction manual before lifting. Lire le manuel dinstructions avant de lever lesparateur.

    Ls instruktionsboken fre lyft.

    Vordat het produkt wordt opgetild, eerst de in-structihandleiding lezen.

    PT

    JP

    Leia o manual de instrues antes de umaoperao de elevao.

    Oeoednmdyekmk nomvhq qe hlpqoriuh .a

    Diabaste to egceiridio me tiz odhgiez protou

    Bgalete th suskeuh apo to kibwtio.

    lm

    ,10A

    50 Hz

    60 Hz

    18

    40

    Q

    47

  • CH/FESX 512S-35CG

    9 Parts for mounting of motor

    For motor with height of shaft

    Machine unit number or

    Subassembly description

    545948-Ref Part No Description -02 -03 Notes

    Quantity225 mm 250 mm

    1 74302 Foundation plate 1 12 223101 52 Washer 4 43 260213 08 Stud bolt 4 4

    3.1 221803 23 Nut 4 44 222208 98 Taper pin with threaded end 2 2

    4.1 223101 33 Washer 2 24.2 221803 21 Nut 2 25 545944 03 Motor plate 15 545944 04 Motor plate 16 70490 Washer 4 47 2210462 29 Screw 48 222208 86 Taper pin with threaded end 28 222208 90 Taper pin with threaded end 2

    8.1 223101 33 Washer 2 28.2 221803 21 Nut 2 29 2210462 26 Screw 49 260001 17 Screw 4

    10 223101 52 Washer 410 70490 Washer 411 222208 90 Taper pin with threaded end 2 2

    11.1 223101 33 Washer 2 211.2 221803 21 Nut 2 212 544782 80 Brake pulley 112 544782 81 Brake pulley 1

    12A 221581 74 Screw 1 113 60571 Elastic plate 3 314 544783 80 Coupling disc 1 115 546149 02 Guard 1 116 223101 49 Washer 6 617 221045 02 Screw 6 618 544627 80 Anchoring foot 6 619 43239 Adjusting washer 18 1820 221803 35 Nut 6 6

    48

  • 9 Parts for mounting of motor

    71

    0A

    49

  • CH/FESX 512S-35CG

    10 Cover interlocking kit

    Machine unit number or

    Subassembly description

    553633-Ref Part No Description -01 Notes

    Quantity1 553261 01 Switch actuator 12 221126 09 Screw 23 551337 01 Limit switch 14 221121 15 Screw 25 554627 01 Shrinking tubing 16 552869 55 Protective tube 17 221121 46 Screw 48 552869 94 Tube clip 49 554627 02 Shrinking tubing 1

    10 552853 02 Cable gland 1

    50

  • 10 Cover interlocking kit

    12

    51

    A

    51

  • CH/FESX 512S-35CG

    11 Nozzle monitor kit

    Machine unit number or

    Subassembly description

    586292-Ref Part No Description -01 Notes

    Quantity1 586294 01 Microphone arm kit 12 586108 80 Connection cable 13 582101 80 Nozzle perfomance monitor 1

    52

  • 11 Nozzle monitor kit

    78

    0Z

    53

  • CH/FESX 512S-35CG

    12 Set of tools

    Machine unit number or

    Subassembly description

    558099-Ref Part No Description -05 Notes

    Quantity1 544261 01 Ring 1 Mounting worm wheel shaft2 543550 01 Ring 1 Mounting ball bearing3 543551 01 Ring 1 Dismounting ball bearing4 528905 07 Ring spanner 19 mm, 22 mm 15 69696 Hook spanner 1 Coupling nut6 260164 06 Hexagon socket 14 mm (1/2") 17 260164 04 Hexagon socket 10 mm (1/2") 18 260164 03 Hexagon socket 8 mm (1/2") 19 8431 Socket spanner 1

    10 527353 09 Socket 30 mm (1/2") 111 556685 80 Lifting tool 1 Distributor13 556699 80 Lifting tool 1 Bowl hood15 556105 80 Lifting tool 1 Bowl body16 538234 80 Lifting tool 1 Spindle (top)17 544371 01 Torque wrench 118 42386 Snap ring pliers 119 527393 05 Snap ring tong 120 543552 01 Mounting tool 1 Ball bearing21 72638 Mounting tool 1 Bushing bowl body22 71365 Spanner for lock ring 1 Lock ring large23 556694 80 Spanner for lock ring 1 Small lock ring

    54

  • 12 Set of tools

    14

    56

    Y

    55

  • CH/FESX 512S-35CG

    Machine unit number or

    Subassembly description

    558099-Ref Part No Description -05 Notes

    Quantity24 65454 Screw spanner 1 Cap nut25 544265 02 Puller 1 Ball bearing worm wheel shaft27 260161 01 Ratchet handle 129 545529 80 Pin spanner 1 Lock ring horizontal device30 543554 01 Washer 1 Brake pulley31 72244 Extension rod 240-255 mm 133 75420 Socket 13 mm (1/2") 134 64324 Tin hammer 136 72243 T-handle 137 73085 Socket 24 mm (1/2") 138 537441 01 Washer 1 Brake pulley39 65380 Pin spanner 1 Throw-off collar top bearing40 72246 Socket 21 mm (1/2") 141 528514 80 Puller 1 Top bearing42 537446 01 Belt pipe wrench 1 Spindle45 72205 Driving-off tool 1 Ball bearing worm46 515674 80 Pin spanner 1 Oil fan47 537464 84 Mounting tool 1 Ball bearing worm wheel shaft

    47A 260001 42 Screw 147B 544275 01 Nut 147C 223101 52 Washer 148 221045 09 Screw 3 Brake pulley49 553188 02 Lifting eye 3 Lifting separator50 2210463 04 Screw 3 Lifting separator

    56

  • 12 Set of tools

    14

    56

    Z

    57

  • CH/FESX 512S-35CG

    Machine unit number or

    Subassembly description

    558099-Ref Part No Description -05 Notes

    Quantity51 221803 40 Nut 3 Lifting separator52 531296 81 Driving-off tool 1 Top bearing53 521196 16 Tubular socket 36 mm 154 560860 01 Washer 2 Lifting separator

    58

  • 12 Set of tools

    14

    26

    O

    59

  • CH/FESX 512S-35CG

    13 Intermediate service kit

    Machine unit number or

    Subassembly description

    549743-Ref Part No Description -02 Notes

    Quantity1 39099 O-ring 1 Bowl body2 67813 O-ring 1 Discharge cover3 67814 O-ring 1 Paring chamber cover4 223412 16 O-ring 1 Inlet pipe lower5 190605 Rectangular ring 1 Inlet pipe upper6 190605 Rectangular ring 1 Outlet housing7 35607 Gasket 1 Oil drain screw8 38324 Gasket 1 Oil filling screw9 554336 01 Lubricating paste 1

    10 539474 03 Silicone grease 111 39518 Gasket 12 Filler pieces12 190605 Rectangular ring 1 Inlet pipe13 14238 O-ring 1 Inlet pipe top

    60

  • 13 Intermediate service kit

    78

    0A

    61

  • CH/FESX 512S-35CG

    14 Major service kit

    Machine unit number or

    Subassembly description

    549744-Ref Part No Description -01 Notes

    Quantity1 38411 O-ring 1 Bottom bearing housing2 64104 O-ring 1 Protecting cap/ Frame bottom part3 65201 O-ring 1 Spindle/ Throw-off collar4 67566 O-ring 1 Ventilation hood5 67811 O-ring 1 Frame top part6 37167 Rectangular ring 1 Oil level gauge7 38967 Gasket 2 Oil level gauge8 37904 Gasket 3 Screw for ventilation hood9 43626 Gasket 1 Bearing shield

    10 65220 Gasket 1 Worm wheel guard11 73665 Rectangular ring 4 Cooling coil12 516107 02 Packing 1 Outlet bend13 546661 01 Gasket 1 Spring casing/ Frame bottom part14 546661 02 Gasket 1 Spring casing15 546833 01 Gasket 5 Height adjusting16 38710 Seal ring 1 Revolution counter17 66076 Lock washer 1 Lower round nut18 66313 Lock washer 1 Upper round nut19 310637 84 Friction pad 1 Brake20 8379 Ball bearing 1 Worm wheel shaft21 233211 94 Ball bearing 1 Worm wheel shaft22 548051 11 Ball bearing 2 Worm23 548745 01 Ball bearing 1 Bowl spindle, top lower24 548746 04 Ball bearing 1 Bowl spindle, bottom25 548747 03 Ball bearing 1 Bowl spindle top, upper

    62

  • 14 Major service kit

    78

    1A

    63

  • CH/FESX 512S-35CG

    15 Servise kit for foundation feet

    Machine unit number or

    Subassembly description

    549541-Ref Part No Description -01 Notes

    Quantity1 544627 80 Anchoring foot 62 221803 23 Nut 6

    64

  • 15 Servise kit for foundation feet

    78

    1C

    65

  • 16 Cross reference list

    16 Cross reference list

    + Part No. Page Ref.

    1270001 46 8

    1270002 02 46 10A

    1270006 46 10

    1270018 01 46 3A

    1270018 02 46 3B

    1270018 03 46 3C

    1270018 04 46 3D

    1270018 05 46 3E

    1270018 06 46 3F

    1270018 07 46 3G

    1270018 08 46 3H

    1270018 09 46 3I

    1270018 10 46 3J

    1270018 11 46 3K

    1270018 12 46 3L

    1270018 13 46 3M

    1270018 14 46 3N

    1270018 15 46 3O

    1270018 16 46 3P

    1270018 17 46 3Q

    1270018 18 46 3R

    1270018 19 46 3S

    1270019 46 3

    14238 34 10

    14238 60 13

    16435 30 20D

    190086 34 22

    190605 34 6

    190605 34 13

    190605 34 16

    190605 60 5

    190605 60 6

    190605 60 12

    190615 34 23

    190617 34 15

    190617 34 18

    190998 34 14

    190998 34 17

    221035 61 24 8A

    221035 62 24 7E

    221041 01 22 15

    221041 01 22 20

    221041 01 38 16.2

    221041 01 22 23

    221041 20 22 28

    221041 20 30 4

    221041 22 22 25

    221045 02 48 17

    221045 09 55 48

    2210462 26 48 9

    Part No. Page Ref.

    2210462 29 48 7

    2210463 04 55 50

    2210948 34 32 12

    221121 15 50 4

    221121 46 40 7

    221121 46 50 7

    221121 48 42 7

    221125 20 42 3A

    221126 09 50 2

    221126 56 40 10

    221131 03 22 36

    221131 09 22 10

    2211724 23 30 39

    221581 06 26 3

    221581 74 48 12A

    221716 09 32 1C

    221721 37 22 41

    221731 04 32 2

    221803 21 48 4.2

    221803 21 48 8.2

    221803 21 48 11.2

    221803 23 48 3.1

    221803 23 64 2

    221803 26 42 4

    221803 33 30 36

    221803 35 48 20

    221803 40 32 9

    221803 40 57 51

    221851 11 32 17

    222111 95 22 16

    222208 86 48 8

    222208 90 48 8

    222208 90 48 11

    222208 98 48 4

    223101 33 48 4.1

    223101 33 48 8.1

    223101 33 48 11.1

    223101 37 22 44

    223101 49 48 16

    223101 52 48 2

    223101 52 48 10

    223101 52 55 47C

    223101 61 32 16

    223101 61 22 14

    223101 61 22 19

    223101 61 22 22

    223101 61 22 29

    223107 28 24 12

    223132 04 40 2

    223406 26 32 1A

    Part No. Page Ref.

    223412 16 34 4

    223412 16 60 4

    223610 32 24 10

    233211 94 62 21

    233211 94 24 4

    260001 17 48 9

    260001 39 24 13

    260001 42 55 47A

    260080 15 40 1

    260161 01 55 27

    260164 03 54 8

    260164 04 54 7

    260164 06 54 6

    260202 04 32 15

    260213 08 48 3

    260254 02 22 31

    310637 84 62 19

    310637 84 28 2A

    35607 22 2

    35607 60 7

    37167 62 6

    37167 22 8

    37904 32 5

    37904 62 8

    38324 60 8

    38324 26 10

    38411 62 1

    38411 30 2

    38685 22 7

    38710 62 16

    38710 26 4

    38967 22 4

    38967 62 7

    38967 22 6

    39098 28 6

    39099 36 9

    39099 38 9

    39099 60 1

    39518 36 14A

    39518 36 15A

    39518 38 14A

    39518 38 15A

    39518 38 16.1

    39518 60 11

    42386 54 18

    43239 48 19

    43626 22 12

    43626 62 9

    515640 95 36 6

    515640 95 36 7

    66

  • CH/FESX 512S-35CG

    Part No. Page Ref.

    515640 95 38 6

    515640 95 38 7

    515674 80 55 46

    516107 02 32 19

    516107 02 62 12

    516382 02 30 29

    519232 80 32 4

    519272 02 32 6

    519330 01 30 1

    519637 03 30 19

    519640 02 36 10

    519640 02 38 10

    521196 16 57 53

    521939 81 32 10

    523348 01 32 21

    52406 46 5

    526343 03 22 45

    526686 02 26 11

    527151 80 32 20

    527353 09 54 10

    527393 05 54 19

    528514 80 55 41

    528905 07 54 4

    530175 80 32 18

    531296 81 57 52

    532348 02 30 33

    532949 02 30 35

    536280 01 36 2

    536280 01 38 2

    536534 84 36 5

    536534 84 38 5

    536534 92 36 6

    536534 92 36 7

    536534 92 38 6

    536534 92 38 7

    536534 93 36 5

    536534 93 38 5

    537299 87 32 8

    537441 01 55 38

    537446 01 55 42

    537464 84 55 47

    537474 85 34 1

    537602 85 28 2

    537758 80 34 5

    537760 02 34 7

    537907 01 36 1.1

    537907 01 38 1.1

    538108 80 36 4

    538108 80 38 4

    538157 01 32 22

    Part No. Page Ref.

    538234 80 54 16

    539474 03 60 10

    540459 04 36 8

    540459 04 38 8

    541988 01 24 8

    541991 01 24 11

    543373 80 32 11

    543376 80 34 3

    543550 01 54 2

    543551 01 54 3

    543552 01 54 20

    543554 01 55 30

    543996 02 26 1

    544017 80 22 18

    544261 01 54 1

    544265 02 55 25

    544275 01 55 47B

    544320 01 24 2

    544371 01 54 17

    544615 81 22 13

    544627 80 48 18

    544627 80 64 1

    544782 80 48 12

    544782 81 48 12

    544783 80 48 14

    544784 80 28 1

    544787 01 24 1

    544789 01 24 6

    544791 80 22 21

    545063 03 22 13A

    545529 80 55 29

    545703 01 24 7C

    545704 01 24 7B

    545705 02 24 7A

    545706 01 24 7D

    545725 11 24 7F

    545725 13 24 7F

    545803 89 24 7

    545803 90 24 7

    545944 03 48 5

    545944 04 48 5

    546149 02 48 15

    546158 82 32 1

    546424 80 24 3

    546427 02 30 5

    546442 82 32 14

    546456 86 22 11

    546456 87 22 11

    546585 01 30 6

    546585 03 30 6

    Part No. Page Ref.

    546608 80 22 24

    546608 81 22 24

    546661 01 30 18

    546661 01 62 13

    546661 02 30 34

    546661 02 62 14

    546791 02 28 3

    546833 01 32 13

    546833 01 62 15

    546846 81 22 42

    547562 01 32 1B

    548051 11 62 22

    548051 11 30 7

    548051 11 30 10

    548367 01 22 40

    548745 01 30 22

    548745 01 62 23

    548746 04 62 24

    548746 04 30 14

    548747 03 30 27

    548747 03 62 25

    549470 83 36 14

    549470 83 38 14

    549470 84 36 14

    549470 84 38 14

    549470 85 36 14

    549470 85 38 14

    549470 86 36 14

    549470 86 38 14

    549470 87 36 14

    549470 87 38 14

    549470 88 36 14

    549470 88 38 14

    549470 89 36 14

    549470 89 38 14

    549470 90 36 14

    549470 90 38 14

    549470 91 36 14

    549470 91 38 14

    549470 92 36 14

    549470 92 38 14

    549470 93 36 14

    549470 93 38 14

    549471 01 38 1

    549471 03 36 1

    549471 80 38 1

    549471 81 36 1

    549472 02 38 16

    549993 80 22 26

    549993 81 22 27

    67

  • 16 Cross reference list

    Part No. Page Ref.

    549995 01 22 1

    549997 01 22 30

    550127 50 42 2

    550532 25 42 6

    551337 01 50 3

    552042 01 44 1

    552158 02 40 3

    552593 05 42 5

    552738 08 42 3

    552845 62 40 9

    552851 02 42 8

    552851 05 42 9

    552851 06 42 10

    552852 03 44 5

    552853 02 50 10

    552869 11 44 4

    552869 13 40 6

    552869 55 50 6

    552869 93 40 8

    552869 94 50 8

    552870 48 40 4

    552870 61 40 5

    552870 61 44 3

    552870 90 44 2

    553171 01 46 7

    553188 02 55 49

    553261 01 50 1

    553272 01 46 7

    554214 02 46 9

    554336 01 60 9

    554627 01 50 5

    554627 02 40 11

    554627 02 44 6

    554627 02 50 9

    554789 01 42 1

    556105 80 54 15

    556685 80 54 11

    556694 80 54 23

    556699 80 54 13

    560310 01 40 99

    560311 01 40 12

    560311 01 44 7

    560860 01 57 54

    582101 80 52 3

    586108 80 52 2

    586294 01 52 1

    60571 48 13

    61899 22 5

    62467 22 3

    64104 30 37

    Part No. Page Ref.

    64104 62 2

    64324 55 34

    65201 30 41

    65201 62 3

    65220 22 17

    65220 62 10

    65380 55 39

    65454 55 24

    65457 22 9

    65461 28 4

    66076 30 16

    66076 62 17

    66169 46 6

    66191 30 31

    66312 30 12

    66313 62 18

    66313 30 11

    67032 36 3

    67032 38 3

    67476 30 17

    67478 24 5

    67566 32 3

    67566 62 4

    67811 32 7

    67811 62 5

    67813 34 2

    67813 60 2

    67814 36 12

    67814 38 12

    67814 60 3

    67960 28 8

    69211 26 6

    69212 26 7

    69214 26 8

    69226 26 9

    69696 54 5

    70321 26 2

    70340 30 20B

    70346 30 30

    70347 30 32

    70490 48 6

    70490 48 10

    70695 28 5

    70700 22 35

    70708 30 20

    70709 30 20C

    70710 30 20A

    70711 30 21

    70712 30 23

    70713 30 24

    Part No. Page Ref.

    70713 30 26

    70714 30 25

    70716 30 28

    70720 30 40

    70830 30 38

    71130 26 5

    71244 36 15

    71244 38 15

    71365 54 22

    71971 30 8

    71972 30 9

    71973 30 13

    72205 55 45

    72243 55 36

    72244 55 31

    72246 55 40

    72546 36 11

    72546 38 11

    72547 36 13

    72547 38 13

    72638 54 21

    73085 55 37

    73665 22 43

    73665 62 11

    73988 30 15

    74302 48 1

    74396 30 43

    74491 30 42

    74567 34 5A

    75420 55 33

    8199 28 7

    8379 62 20

    8379 24 9

    8431 54 9

    956264 13 46 4

    68


Recommended