Date post: | 02-Nov-2014 |
Category: |
Documents |
Upload: | argonzal7103 |
View: | 924 times |
Download: | 14 times |
Industrial Spray Products
CATALOG 55
ENGINEERS AND MANUFACTURERS OFSPRAY NOZZLES AND ACCESSORIES
INDUSTR
IAL
SPRAY
PRO
DUCTS
•CATA
LOG
55
SPRAYIN
GSYSTEM
SCO
Application AssistanceComes With EveryProduct We SellSpraying Systems Co. manufactures over 19,000 different spray nozzles andaccessories to meet the diverse requirements of industry. This broad line of prod-ucts reflects over fifty years of spray problem solving that has led to thousands ofnew spray nozzle designs to meet the specific needs of a very diverse customerbase. Applications can range from computer chip etching to the controlled coolingof continuous cast steel. And this uncommon application expertise is available,free of cost, to every customer or potential customer. It’s a very important part ofSpraying Systems’ commitment to industry.
Precision EngineeredSpray Products forTop PerformanceFrom bar stock to finished product, we put quality first,because product quality is just as important to us as it is toyou. Spraying Systems utilizes state-of-the-art design equip-ment and machine tools…and actually designs and builds spe-cialized equipment for many machining operations where criti-cal tolerances cannot be compromised.
A
B
C
D
E
G
F
Table of Contents
Introduction
QuickJet® System
UniJet® System
General PurposeNozzles
Hollow ConeSpray
Full ConeSpray
Flat Spray
Fine Spray
Air AtomizingNozzles
Spray GunsAutomatic andManually Actuated
Special PurposeNozzles
FluidlineAccessories
Appendix
Spraying Systems Co. Overview, Spray Characteristics, EngineeringDiscussions, Nozzle Maintenance
QuickJet® Nozzle Bodies, Quick WhirlJet®, Quick FullJet®, Quick VeeJet®, ProMax®
QuickJet® System, Quick FlatJet®, Quick FloodJet®, Quick WashJet®
UniJet® Nozzle Bodies, Nozzle Assemblies, Quick UniJet®
System, UniJet® Spray Tips,Blow-Off Nozzle
WhirlJet®, HollowJet®, SprayDry®,DeflectoJet®, SpiralJet®
FullJet®, DistriboJet®, SpiralJet®
VeeJet®, FlatJet®, FloodJet®,WashJet®, FoamJet®, RotoClean®
FogJet®, Hydraulic Atomizing
Basic Nozzle Installations, NozzleBody Assemblies, Spray Set-Ups,Automatic Air Actuated Nozzles,Humidification, Accessories
AutoJet®, GunJet®, Extensions,Accessories, Adapters
Rotary and Stationary Tank Washing Nozzles, Foam Control, Self-Cleaning, Tube Cleaning, Hot Melt GlueTips, DescaleJet®, CasterJet®, SprayDry®, AirJet®, Adjustable balltype nozzles, Clip-Eyelet®,WindJet®, Manifold System, Moisturizing/coating header,Flowback Nozzle Lances
Split-Eyelet Connectors, Adjustable Ball Fittings, Valves,Pressure Regulators, Gauges,Filters, Strainers, SwivelConnectors, Quick CouplersTank mixing eductor
Trademark Ownership, Worldwide Sales Offices, Master IndexTechnical Support Materials
Research andDevelopment –Key to New ProductPerformanceSpraying Systems Co. maintains the industry’smost fully-equipped spray nozzle test laborato-ries to conduct the studies necessary in thedevelopment of new products.
Our laboratories provide an ideal environmentfor materials wear testing, spray distributionanalysis, measurement of spray impact,spray drop analysis, and for conductingmany other tests related to spray perfor-mance.
The Research and Development labs arealso the test ground for new ideas…tostudy their performance capabilities,spray characteristics, applicationpotential and other factors that deter-mine the feasibility of a new product.R&D helps us prove the best andreject the rest. As a result, our cus-tomers benefit from constantinnovation of existing productsas well as thoroughly testednew products.
Pioneers inAutomated DropSize Analysis
Spraying Systems Co. pioneered drop sizeanalysis in the early 1960’s with theCompany’s development of an electronicanalyzer. It was a milestone achieve-ment in accurately measuring drop sizewithin a spray’s environment. And it’sstill in use today. The Company lateradded a light diffraction instrument,followed by the addition of an imag-ing analyzer, and more recently alight scattering instrument usingPhase Doppler techniques. Byusing this state-of-the-art instru-mentation, Spraying Systemscan characterize sprays andobtain valuable informationsuch as drop diameter aver-ages, distribution and veloc-ity profiles within theaccepted characterizationstandards established bythe American Society forTesting and Materials(ASTM).
Worldwide Manufacturing About this catalogOn the following pages are descriptions and technical datafor nearly 19,000 spray products. To assist your location ofa specific spray product or type of product, or engineeringdata, we have divided the catalog into 9 sections:
IntroductionIncludes an overview of Spraying Systems Co., spray characteristics, engineering discussions, andnozzle maintenance information.
QuickJet® SystemA “catalog within a catalog” features SprayingSystems’ complete line of quick connect nozzles and accessories.
UniJet® SystemAnother “catalog within a catalog” featuring over 400 interchangeable spray tip designs that fit into thepopular UniJet bodies and retainer cap assemblies.
General Purpose NozzlesFeatures Spraying Systems’ complete line of threaded and flange-type nozzles…in hollow cone,full cone, fine and flat spray patterns.
Air Atomizing NozzlesNozzle set-ups that produce a completely atomized spray.
Spray GunsA complete listing of all Spraying Systems’ automaticand manually actuated spray guns.
Special Purpose NozzlesA section devoted to specialized nozzles and systemsdesigned for specific industrial applications.
Fluidline AccessoriesA complete listing of the industry’s largest line ofspray nozzle accessories from split-eyelet connectorsto liquid strainers.
AppendixTrademark ownership, Spraying Systems’ worldwideorganization, master index, and technical supportmaterials.
Complete nozzle or accessory ordering information isincluded on virtually every product page. For a completeproduct listing by trademark name, see Table of Contents,page 3. For additional product information, contact yourlocal Spraying Systems’ representative.
SSaaoo PPaauulloo,, BBrraazziill
YYoohhkkaa IIcchhiippaa,, JJaappaann
HHaammbbuurrgg//GGrruunnbbaacchh,, GGeerrmmaannyy
HHuuddssoonn,, NNeeww HHaammppsshhiirree
WWhheeaattoonn,, IIlllliinnooiiss
Spraying Systems Co. reserves the right to makechanges in specifications or design of the productsshown in this catalog or to add improvements atany time without notice or obligation.
Trademark ownership of trade names used in thisCatalog, other than Spraying Systems Co., is shownin the Appendix Section.
A
B
C
D
E
F
G
Spray Characteristics
Because spray nozzlesare designed to performunder many differentspraying conditions, it islikely that there is morethan one spray nozzlethat would meet yourgeneral requirements.
Following is a discussionof spray characteristics tohelp explain the criteria bywhich each candidatespray nozzle must beevaluated in order to
achieve the most efficientspray performance in yourindividual application.
Each of the followingsections is discussed inmore detail with respect to specific spray types ineach nozzle tabulationsection of the catalog.
Still more specific infor-mation may be obtainedby contacting a salesengineer at your localsales office.
Spray PatternsHollow Cone The hollow cone spray pattern is
essentially a circular ring of liquid.This pattern is generally formed byuse of an inlet tangential to a whirlchamber, or by an internal groovedvane immediately upstream fromthe orifice. The whirling liquidresults in a hollow cone configura-tion as it leaves the orifice.
A full cone spray pattern is round,square, or oval in coverage, andcompletely filled with spray drops.This spray pattern is normallyformed by using an internal vane,which imparts controlled turbulenceto the liquid prior to the orifice. Fullcone coverage can also be accom-plished with smaller drop size byuse of a header arrangement ofatomizing or fine spray nozzles.
SolidStream
A solid stream spray pattern isbasically a uniform stream of liquidemitted through a drilled hole.However, modern solid streamnozzles have been refined by useof proper inlet chamber proportionsand contours ahead of the orificeand/or by addition of internal flowstabilizing vanes. These nozzlesprovide prolonged solid streamintegrity and delay the start ofbreakup and drop formation afterleaving the nozzle orifice.
6
INT
RO
DU
CT
ION
Full Cone
7
INT
RO
DU
CT
ION
A flat spray pattern distributes theliquid as a flat- or sheet-typespray. The flat spray pattern isformed by use of an ellipticalorifice, or by a round orificetangential to a deflector surface.
In the elliptical orifice design, the axis of the spray pattern is a continuation of the axis of theinlet pipe connection. In thedeflector design, the deflectionsurface diverts the spray patternaway from the axis of the inletpipe connection.
Straight-through elliptical orificespray nozzles normally produceflat spray patterns with taperingedges. This characteristic is usefulin establishing overlapping patternsbetween adjacent sprays on amultiple-nozzle header. The result-ing distribution across the entiresprayed surface can therefore be uniform.
Flat spray nozzles with non-tapered or “even” edges areusually used in cleaning applica-tions that require uniform impactacross the entire pattern widthwithout overlapping the sprays.
Fine Spray These low-capacity nozzles pro-duce a hollow cone spray pattern.Since the spray drops are verysmall, the spray pattern is affectedby air friction and currents, and isnot maintained for long distances.Several feet from the nozzle,depending on spraying pressureand nozzle capacity, the fine spraypattern disappears as the dropsbecome suspended in air. Nozzlesused for spray-drying applicationsat pressures of 1,000 psi (70 bar)or greater perform similarly.
Air Atomizing Air atomizing nozzles provide thefinest degree of atomization for a given capacity and pressure.There is a choice of patterns:round, wide-angle round, 360°round, or flat. The spray patternremains only as long as thevelocity of the atomizing air ismaintained. The spray drops mayevaporate completely, dependingon their size, exposure time, therelative humidity, and otherambient conditions.
Flat Spray
Weight of Solution Specific ConversionGravity Factors
7.0 lbs. per gallon .84 1.098.0 lbs. per gallon .96 1.028.34 lbs. per gallon – WATER 1.00 1.009.0 lbs. per gallon 1.08 .9610.0 lbs. per gallon 1.20 .9111.0 lbs. per gallon 1.32 .8712.0 lbs. per gallon 1.44 .8314.0 lbs. per gallon 1.68 .77
Engineering DiscussionsKey Performance ConsiderationsImportant in selecting spray nozzles for specific applications8
INT
RO
DU
CT
ION
PipeSizeStd.Wt.
GateValveFULLOPEN
GlobeValveFULLOPEN
45°Elbow
Run ofStd.Tee
Std.Elbowor Runof Tee
Reduced1/2
Std.Tee
throughSide
Outlet 1⁄8) 1⁄4) 3⁄8) 1⁄2) 3⁄4) 1) 11⁄4) 11⁄2) 2) 21⁄2" 3) 31⁄2) 4) 5) 6) 8)
All capacity tabulations in thiscatalog are based on water.Since the specific gravity of aliquid affects its flow rate, tabu-lated catalog capacities must bemultiplied by the conversionfactor that applies to the specificgravity of the liquid spray asshown in the chart below.
Nozzle capacity varies withspraying pressure. In general,the relationship between gpmand pressure is as follows:
EDDgpm1 psi1______ = ______EDDgpm2 psi2
Capacity
Flow of Water Through Schedule 40 Steel Pipe
Approximate Friction Loss in Pipe FittingsIn equivalent feet of straight pipe
Recommended capacity range for each size is shown in shaded areas.
ActualInsideDiam.
In.
Flowin
gpm
0.30.40.50.60.81.01.52.02.53.04.05.06.08.010152025303540455060708090
100125150200250300400500750
10002000
.42
.701.11.52.53.78.0
13.4
.16
.24
.33
.54
.831.83.04.56.4
11.1
.13
.19
.40
.661.01.42.43.75.29.1
.06
.12
.21
.32
.43
.741.11.62.84.2
.05
.08
.11
.18
.28
.38
.661.02.23.8
.06
.08
.12
.20
.30
.641.11.72.43.2
.05
.08
.16
.28
.42
.59
.791.01.31.62.2
.08
.13
.19
.27
.36
.47
.59
.721.01.41.82.22.7
.04
.06
.08
.11
.14
.17
.20
.29
.38
.50
.62
.761.21.72.9
.04
.06
.07
.08
.12
.16
.20
.25
.31
.47
.671.2
.04
.05
.07
.09
.11
.16
.22
.39
.59
.84
.04
.05
.08
.11
.19
.28
.40
.70
.04
.06
.10
.15
.21
.37
.57
.05
.07
.12
.18
.39
.68
.05
.07
.16
.271.0
.04
.07
.26
1⁄8) .269 .15 8.0 .35 .40 .75 1.41⁄4) .364 .20 11.0 .50 .65 1.1 2.21⁄2) .622 .35 18.6 .78 1.1 1.7 3.33⁄4) .824 .44 23.1 .97 1.4 2.1 4.21) 1.049 .56 29.4 1.2 1.8 2.6 5.3
11⁄4) 1.380 .74 38.6 1.6 2.3 3.5 7.011⁄2) 1.610 .86 45.2 1.9 2.7 4.1 8.12) 2.067 1.1 58 2.4 3.5 5.2 10.4
21⁄2) 2.469 1.3 69 2.9 4.2 6.2 12.43) 3.068 1.6 86 3.6 5.2 7.7 15.54) 4.026 2.1 113 4.7 6.8 10.2 20.35) 5.047 2.7 142 5.9 8.5 12.7 25.46) 6.065 3.2 170 7.1 10.2 15.3 31
Pressure Drop in psi for Various Pipe Sizes(in 10 ft. length)
-Intro 55-55M INTRO CP 3/9/98 8:27 AM Page 8
Drop size refers to the size of the individual spray drops whichcomprise a nozzleÕs spray pattern.All of the spray drops within agiven spray are not the samesize. Some of the different waysto describe drop sizes within aspray are defined below:
(VMD) Volume Median Diameter Dv0.5 and (MMD) Mass MedianDiameter: A means of expressingdrop size in terms of the volume of liquid sprayed. The VolumeMedian Diameter drop size whenmeasured in terms of volume (ormass) is a value where 50% of thetotal volume of liquid sprayed ismade up of drops with diameterslarger than the median value and50% with smaller diameters.
(SMD) Sauter Mean Diameteralso expressed as D32: Ameans of expressing the finenessof a spray in terms of the surfacearea produced by the spray. The Sauter Mean Diameter is the diameter of a drop having thesame volume-to-surface arearatio as the total volume of all thedrops to the total surface area ofall the drops.
(NMD) Number MedianDiameter expressed as NMDand DN0.5: A means ofexpressing drop size in terms ofthe number of drops in the spray.This means that 50% of the dropsby count or number are smallerthan the median diameter and50% of the drops are larger thanthe median diameter.
These drop sizes are usually ex-pressed in microns (micrometers).One micron equals 1/25,400 inchÐ or 0.001 mm. 3,175 micronsequals !\° inch.
Other than the effects of thespecific material being sprayedthe three major factors affectingdrop size are nozzle type andcapacity, spraying pressure, andspray pattern type. Lower sprayingpressures provide larger dropsizes, while higher sprayingpressures yield smaller drop sizes.The smallest drop sizes areachieved by air atomizing nozzles.Generally speaking, the largestspray drops are produced by fullcone hydraulic spray nozzles. Inthe hydraulic spray nozzle seriesthe smallest drop sizes areproduced by hollow cone spray
nozzles, including the hydraulicatomizing type or fine spray.
Within each type of spray patternthe smallest capacities producethe smallest spray drops, and thelargest capacities produce thelargest spray drops. Because theVolume Median Diameter (VMD)is based on the volume of liquid
sprayed, it is a widely acceptedreference and is used in thechart below.
More complete drop size data isavailable on all types of spraynozzles. Contact your localSpraying Systems Co. repre-sentative for more information.
500 Microns
1,200 Microns
5,500 Microns
9
INT
RO
DU
CT
IONThis table lists the theoretical
coverage of spray patterns ascalculated from the includedspray angle of the spray and thedistance from the nozzle orifice.These values are based on theassumption that the spray angleremains the same throughout theentire spray distance. In actualpractice, the tabulated sprayangle does not hold for longspray distances. Write for datasheets on actual spray coverage.
Tabulated spray angles indicateapproximate spray coveragesbased on water. In actualspraying, the effective spray
angle varies with spray distance.If the spray coverage require-ment is critical, write for specificspray coverage data. Liquidsmore viscous than water formrelatively smaller spray angles(or even a solid stream),depending upon viscosity, nozzlecapacity and spraying pressure.Liquids with surface tensionslower than water will producerelatively wider spray angles thanthose listed for water.
Spray Angle and Coverage Included
SprayAngle
5°10°15°20°25°30°35°40°45°50°55°60°65°70°75°80°85°90°95°
100°110°120°130°140°150°160°170°
Spray Drop Size(Atomization)
Based on a sampling of nozzles selected to show the wide range of possible drop sizes available.
ActualDrop Sizes
SprayDistance
TheoreticalCoverage
SprayAngle
Spray PatternType
Air Atomizing
Fine Spray
Hollow Cone
Flat Fan
Full Cone
One Inch = 25,400 Microns
THEORETICAL COVERAGE AT VARIOUS DISTANCES (in inches)FROM NOZZLE ORIFICE
2" 4" 6" 8" 10" 12" 15" 18" 24" 30" 36" 48"
0.2"0.4"0.5"0.7"0.9"
1.1"1.3"1.5"1.7"1.9"
2.1"2.3"2.5"2.8"3.1"
3.4"3.7"4.0"4.4"4.8"
5.7"6.9"8.6"
10.9"14.9"
22.7"45.8"
0.4"0.7"1.1"1.4"1.8"
2.1"2.5"2.9"3.3"3.7"
4.2"4.6"5.1"5.6"6.1"
6.7"7.3"8.0"8.7"9.5"
11.4"13.9"17.2"21.9"29.8"
45.4"91.6"
0.5"1.1"1.6"2.1"2.7"
3.2"3.8"4.4"5.0"5.6"
6.3"6.9"7.6"8.4"9.2"
10.1"11.0"12.0"13.1"14.3"
17.1"20.8"25.7"32.9"44.7"
68.0"
0.7"1.4"2.1"2.8"3.5"
4.3"5.0"5.8"6.6"7.5"
8.3"9.2"
10.2"11.2"12.3"
13.4"14.7"16.0"17.5"19.1"
22.8"27.7"34.3"43.8"59.6"
90.6"
0.9"1.8"2.6"3.5"4.4"
5.4"6.3"7.3"8.3"9.3"
10.3"11.5"12.7"14.0"15.3"
16.8"18.3"20.0"21.8"23.8"
28.5"34.6"42.9"54.8"74.5"
113"
1.1"2.1"3.2"4.2"5.3"
6.4"7.6"8.7"9.9"
11.2"
12.5"13.8"15.3"16.8"18.4"
20.2"22.0"24.0"26.2"28.6"
34.3"41.6"51.5"65.7"89.5"
1.3"2.6"3.9"5.3"6.6"
8.1"9.5"
10.9"12.4"14.0"
15.6"17.3"19.2"21.0"23.0"
25.2"27.5"30.0"32.8"35.8"
42.8"52.0"64.4"82.2"112"
1.6"3.1"4.7"6.4"8.0"
9.7"11.3"13.1"14.9"16.8"
18.7"20.6"22.9"25.2"27.6"
30.3"33.0"36.0"39.3"43.0"
51.4"62.4"77.3"98.6"
2.1"4.2"6.3"8.5"
10.6"
12.8"15.5"17.5"19.9"22.4"
25.0"27.7"30.5"33.6"36.8"
40.3"44.0"48.0"52.4"57.2"
68.5"83.2"103"
2.6"5.2"7.9"
10.6"13.3"
16.1"18.9"21.8"24.8"28.0"
31.2"34.6"38.2"42.0"46.0"
50.4"55.0"60.0"65.5"71.6"
85.6"104"
3.1"6.3"9.5"
12.7"15.9"
19.3"22.7"26.2"29.8"33.6"
37.5"41.6"45.8"50.4"55.2"
60.4"66.0"72.0"78.6"85.9"
103"
4.2"8.4"
12.6"16.9"21.2"
25.7"30.3"34.9"39.7"44.8"
50.0"55.4"61.2"67.2"73.6"
80.6"88.0"96.0"105"114"
10 psiCAPACITY VMD
gpm microns
.005 20.02 100
.22 375
.05 36012 3400.05 2605 4300
.10 114012 4300
40 psiCAPACITY VMD
gpm microns
.008 158 200
.03 110
.43 330
.10 30024 1900.10 22010 2500.19 85023 2800
100 psiCAPACITY VMD
gpm microns
12 400.05 110.69 290.16 20038 1260.16 190
15.8 1400.30 50035 1720
-Intro 55-55M INTRO CP 3/9/98 8:27 AM Page 9
Flat Fan 15° 30%25° 18%35° 13%40° 12%50° 10%65° 7%80° 5%
Full Cone 15° 11%30° 2.5%50° 1%65° 0.4%80° 0.2%
100° 0.1%Hollow Cone 60° 80° 1 to 2%
Capacity of liquid being sprayed = 1Capacity of water x √ Specific gravity
Specific gravity is the ratio ofthe mass of a given volume ofliquid to the mass of the samevolume of water. In spraying,the main effect of the specificgravity of a liquid (other thanwater) is on the capacity of thespray nozzle. Since the valuesin this catalog are based onspraying water, a conversionfactor can be applied to deter-mine the nozzle capacity whenusing a liquid other than water.
A formula that can be usedinstead of the chart below is:
For technical assistance withspecific applications, contactyour local Spraying Systems Co.representative.
10
INT
RO
DU
CT
ION
Engineering Discussions CONT.Key Performance ConsiderationsImportant in selecting spray nozzles for specific applications
Impact, or the impingement of aspray onto the target surface, canbe expressed in several differentways. The most useful impactvalue with regard to spray nozzleperformance is the Impact perSquare Inch. Basically, this valuedepends on the spray patterndistribution and the spray angle.To obtain the Impact per SquareInch (pounds per square inch) ofa given nozzle first determine thetheoretical total impact using the formula:.
Then from the chart on the rightobtain the impact per squareinch of the theoretical total impactand multiply by the theoreticaltotal. The result is the sprayimpact in lbs./sq. in. The greatestimpact in lbs./sq. inch is obtainedby solid stream nozzles and canbe calculated by the formula: 1.9x (spraying pressure, psi).
Impact
Specific Gravity
The values given in the tabulationsections of this catalog indicatethe most commonly used pres-sure ranges for the associatedspray nozzle or accessory.Some spray nozzles andaccessories can perform belowor above the pressures shown,while others can be modified atour factory or redesigned toaccommodate the requirementsof specific new applications.
You should contact your localSpraying Systems Co. repre-sentative when information onthe performance of spraynozzles or accessories outsideof the pressure range given inthis catalog is required.
Operating Pressure
* At 12" (30 cm) distance from the nozzle.
SprayPatternType
SprayAngle
Key:Conversion factor multiplied by thecapacity of the nozzle when sprayingwater gives the capacity of the nozzlewhen spraying a liquid with aspecific gravity corresponding to theconversion factor. This conversionfactor accounts only for the effect ofspecific gravity on capacity and doesnot account for other factorsaffecting capacity.
Percent ImpactPer sq. inch of
TheoreticalTotal Impact*
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0
Specific Gravity of Liquid
Specific Gravity versus Conversion Factor
Water
Conv
ersi
on F
acto
r
The values given in the tabulationsections of this catalog indicatethe most commonly used pres-sure ranges for the associatedspray nozzle or accessory.Some spray nozzles andaccessories can perform belowor above the pressures shown,while others can be modified atour factory or redesigned toaccommodate the requirementsof specific new applications.
You should contact your localSpraying Systems Co. repre-sentative when information onthe performance of spraynozzles or accessories outsideof the pressure range given inthis catalog is required.
Operating Pressure
Theoretical Total Impact Spraying Water (pound - force) =.0526 x (gpm at spraying pressure) x √spraying pressure, psi
-Intro 55-55M INTRO CP 3/9/98 8:27 AM Page 10
PatternQuality Improves Negligible Deteriorates Improves Negligible
Capacity Increases Decreases • •• No EffectSpray IncreasesAngle Then Decreases Negligible Decreases Increases Decreases
DropSize Decreases Negligible Increases Decreases Increases
Velocity Increases Decreases Decreases Increases NegligibleImpact Increases Negligible Decreases Increases NegligibleWear Increases Negligible Decreases •• No Effect
Approximate AbrasionResistance Ratio of Typical
Spray Nozzle Materials
Aluminum 1Brass 1Steel 1.5 to 2MONEL 2 to 3Stainless Steel 4 to 6HASTELLOY 4 to 6Hardened Stainless Steel 10 to 15STELLITE 10 to 15Ceramics 90 to 200Silicon Carbide(Nitride Bonded) 90 to 130Carbides 180 to 250
11
INT
RO
DU
CT
ION
Absolute (dynamic) viscosity isthe property of a liquid whichresists change in the shape orarrangement of its elementsduring flow. Liquid viscosity is aprimary factor affecting spraypattern formation and, to a lesserdegree, capacity. High viscosityliquids require a higher minimumpressure to begin formation of aspray pattern and provide narrow-er spray angles as compared tothose of water. The generaleffects of a viscosity other thanthat of water are shown in thesummary chart below.
ViscosityThe values given in this catalogare based on spraying water at70°F (21°C). Although liquidtemperature changes do notaffect the spray performance ofa nozzle they often affectviscosity, surface tension, andspecific gravity which doinfluence spray nozzleperformance. For the effects oftemperature changes on spraynozzle performance see thesummary chart below.
TemperatureThe surface of a liquid tends toassume the smallest possiblesize; acting, in this respect, like a membrane under tension. Any portion of the liquid surfaceexerts a tension upon adjacentportions or upon other objectswith which it is in contact. Thisforce is in the plane of thesurface and its amount per unitof length is surface tension. Itsvalue for water is about 73 dynesper cm at 70°F (21°C). The maineffects of surface tension are onminimum operating pressure,spray angle and drop size.
The property of surface tension ismore apparent at low operatingpressures. A higher surfacetension reduces the spray angle,particularly on hollow cone andflat fan spray nozzles. Low surfacetensions can allow a nozzle to beoperated at a lower pressure. Seethe summary chart below for thegeneral effects of surface tensionon spray nozzle performance.
Surface Tension
Nozzle wear is typically charac-terized by an increase in nozzlecapacity, followed by a generaldeterioration of the spraypattern. Flat fan spray nozzleswith elliptical orifices experiencea narrowing of the spray pattern.In other spray pattern types thedistribution within the spraypattern deteriorates – withoutsubstantially changing thecoverage area. The increase innozzle capacity can sometimesbe recognized by a decrease insystem operating pressure,particularly when using positivedisplacement pumps.
Plastics are not shown in thetable due to the extremely widevariation in abrasion resistanceof various plastics depending onthe application environment,type of nozzle, and operatingparameters. Spraying SystemsCo. offers many nozzles inplastic materials. In selecting aplastic material, please referyour specific requirements tothe factory.
Nozzle Wear
The information in the chart belowapplies to most spray applications.However, because there are somany different types and sizes ofspray nozzles the effects mayvary in each specific application.In some applications, there are“inter-related” factors which may“balance-out” certain effects. Forinstance in the case of a hollowcone spray nozzle, increasingthe temperature of the liquid
decreases the specific gravitythereby producing a greater flowrate while at the same timedecreasing the viscosity whichreduces the flow. SprayingSystems Co. welcomes theopportunity to assist you withspecific application questions.Please contact your localrepresentative with yourindividual requirements.
Factors Affecting Spray NozzlePerformance: Summary
Increase inOperatingPressure
Increase in Specific
Gravity
Increase in
Viscosity
Increase inFluid
Temperature
Increasein SurfaceTension
• Full cone and hollow cone increase; flat spray decreases•• Depends on fluid being sprayed and spray nozzle used
AluminumAluminum BronzeAluminum OxideBeryllium CopperBoron CarbideBrassBronzeCast IronCeramicChrome CarbideCopperCPVCCupro NickelDELRINDuctile IronDURANICKELDURONZEEVERDURFRPGraphiteHard Rubber
Hard Stainless SteelHASTELLOYHAVEGILLIUMINCOLOYINCONELKEL-FKYNARLeadLUCITEMONELNaval BrassNickelNylonPolycarbonatePolyethylenepolypropylenePolyurethanePVCREFRAXReinforced Polyester
SapphireSilicon Carbide(Nitride Bonded)Silicon Carbide(Reaction Bonded)Silicon Carbide(Sintered)Stainless Steels(all grades)SteelSTELLITETantalumTEFLON317 LMN Stainless SteelTitaniumTungsten CarbideULTIMETVITONZIRCALLOYZirconium
12
Unit Equivalent
Fahrenheit (F°) = 9/5 C° + 32
Celsius (C°) = 5/9 (F° – 32)
Circumferenceof a Circle = 3.1416 x
Diameter
Area of a Circle = .7854 x Squareof the Diameter
Volume of a Sphere = .5236 x Cubeof the Diameter
Area of a Sphere = 3.1416 x Squareof the Diameter
Unit EquivalentOunce 28.35 Gr.Pound 0.4536 Kg.Horse-Power 0.746 Kw.British Thermal Unit 0.2520 Kg. Cal.Square Inch 6.452 Sq. Cm.Square Foot 0.09290 Sq. M.Acre 0.4047 HectareAcre 43.560 Sq. Ft.
LinearUnit
CubicCentimeter • 0.034 2.2 x10–3 0.001 2.64x10–4 3.53x10–5 1.0x10–6
Fluid Ounce 29.4 • 0.065 0.030 7.81x10–3 1.04x10–3 2.96x10–5
Pound ofWater 454 15.4 • 0.454 0.12 0.016 4.54x10–4
Liter 1000 33.8 2.2 • 0.264 0.035 0.001US Gallon 3785 128 8.34 3.785 • 0.134 3.78x10–3
Cubic Foot 28320 958 62.4 28.3 7.48 • 0.028Cubic Meter 1.0 x106 3.38x104 2202 1000 264 35.3 •
VolumetricUnit
Lb/In2 (psi) • 2.31 0.070 0.068 0.069 2.04 6.895Ft Water 0.433 • 0.030 0.029 0.030 0.882 2.99Kg/Cm2 14.2 32.8 • 0.968 0.981 29.0 98Atmosphere 14.7 33.9 1.03 • 1.01 29.9 101Bar 14.5 33.5 1.02 0.987 • 29.5 100InchMercury 0.491 1.13 0.035 0.033 0,034 • 3.4kPa(kilopascal) 0.145 0.335 0.01 0.009 0.01 0.296 •
LiquidPressure
INT
RO
DU
CT
ION
Engineering Discussions CONT.Key Performance ConsiderationsImportant in selecting spray nozzles for specific applications
Spraying Systems Co. manu-factures spray nozzles andaccessories in a wide range ofmaterials to meet the needs of all spraying applications. Foreach “standard” nozzle there is aselection of “standard” materialswhich have been determined tomeet the usual requirements ofthe applications most commonlyassociated with that type ofnozzle. Additionally, SprayingSystems Co. nozzles can bemanufactured from materialsother than those shown in thenozzle tabulation sections of this catalog.
Throughout our 50-plus years as the leading manufacturer ofspray nozzles and accessories,Spraying Systems Co. hasaccumulated much applicationexperience dealing with specialrequirements involving corrosive,hot, and abrasive liquids;suspensions; and corrosiveenvironments. We would bepleased to discuss your specialapplication requirements, includ-ing choices of suitable nozzlematerials. The list at righttabulates some of the materialsfrom which we have fabricatedspray nozzles and accessories.Plated or coated nozzles canalso be supplied on request.
Materials
See Appendix for trademark credits.
Volumetric Units—EquivalentsCubicCenti-meter
FluidOunce
Poundof
WaterLiter US
GallonCubicFoot
CubicMeter
Linear Units—Equivalents
Micron Mil Milli-meter
Centi-meter Inch Foot Meter
Liquid Pressure—Equivalents
Lb/In2
(psi)Ft
Water Kg/Cm2 Atmo-sphere Bar Inch
MercurykPa
(kilopascal)
Miscellaneous—Equivalents and Formulas
The catalog tabulations show orifice dimensions as “Nom.” (nominal).Specific dimensions are available on request.
Spray performance data and nozzle dimensions are also available inU.S. Units. Write for information.
Dimensions
Table of Equivalents
Micron • 0.039 0.001 1.0x10–4 3.94x10–5
Mil 25.4 • 2.54x10–2 2.54x10–3 0.001 8.33x10–5
Millimeter 1000 39.4 • 0.10 0.0394 3.28x10–3 0.001Centimeter 10000 394 10 • 0.394 0.033 0.01Inch 2.54x104 1000 25.4 2.54 • 0.083 0.0254Foot 3.05x105 1.2x104 305 30.5 12 • 0.305Meter 1.0x106 3.94x104 1000 100 39.4 3.28 •
13
INT
RO
DU
CT
ION
Nozzle MaintenanceHow nozzle maintenance can eliminate quality problems,spray liquid waste and high operating costs
As the preceding pagesindicate, there’s a multitudeof factors involved inselecting the best nozzlefor your application. And,just like other productionequipment, nozzles requiremaintenance: regularinspection, cleaning, andeven replacement in orderto preserve final produc-tion quality and to maintainproduction processes on acost-efficient basis.
How often should youinspect spray nozzles?The type and frequency ofyour maintenance scheduledepends on your particularapplication. In some
operations, nozzles arestill spraying usefully afterthousands of hours ofoperation; in others,however, nozzles requiredaily attention. Mostnozzle applications fallbetween these extremes.
At the very least, youshould visually check fordamage during everypreventive maintenanceshutdown. Additionalmaintenance schedulingdepends on applicationspecifications, the liquidused and nozzle material.
Common causes ofspray nozzle problemsWhat should you look for duringinspection? The answer dependson your particular sprayingapplications. Sometimes it’swear from a high pressureprocess. Or caking from sprayinga highly viscous liquid. The sevenmost common causes include:
Erosion and wear. The gradualremoval of material from the sur-faces of the nozzle orifice andinternal flow passages causesthem to become larger and/ordistorted which can affect flow,pressure and spray pattern.
Corrosion. The chemical actionof sprayed material or the envi-ronment causes corrosionbreakdown of the nozzle material.
Clogging. Unwanted dirt orother contaminants blocking theinside of the orifice can restrictthe flow and disturb spraypattern uniformity.
Caking. Overspraying, mistingor chemical buildup of materialon the inside or outer edges ofthe orifice from evaporation ofliquid can leave a layer of driedsolids and obstruct the orifice orinternal flow passages.
Temperature damage. Heat may have an adverse effect onnozzle materials not intended forhigh-temperature applications.
Improper reassembly.Misaligned gaskets, overtight-ening, or other repositioningproblems can result in leakage aswell as poor spray performance.
Accidental damage. Inadvertentharm to an orifice can be causedby scratching through the use ofimproper tools during installationor cleaning.
Spray from clean nozzle
Distorted spray from damaged or clogged nozzle
Erosion and wear Caked
Corroded Heat damaged Damaged
14
INT
RO
DU
CT
ION
Nozzle Maintenance CONT.How nozzle maintenance can eliminate quality problems,spray liquid waste and high operating costs
How to check spraynozzle performanceDepending on their importancefor your particular application,you should check these fivefactors on a regular basis:
Product quality/applicationresults. Quality control inspec-tion could reveal product defectscaused by poor spraying perfor-mance such as uneven coating,streaking, or structural imperfec-tions from improper productcooling. Application-specificmeasurements can also help youevaluate spraying performance;for example, check the dustcontent of the air for dust sup-pression; and check the relativehumidity for humidity control.
Flow rate. The eye cannot detectincreased flow, so the flow rateof each nozzle should bechecked periodically by readingthe flow meter or collecting sprayin a container and the resultscompared to specifications or tothe performance of new nozzles.
Spray pressure. Pressure in thenozzle manifold can be checkedusing a properly calibratedpressure gauge.
Spray pattern. In many instancesyou can visually check for patternuniformity. Changes caused byorifice damage, clogging orcaking are usually noticeable.However, to detect gradualorifice wear you may needspecial measuring equipment.
Nozzle alignment. To provideuniform coverage, nozzles shouldbe oriented correctly in relationto one another so that all patternsare parallel.
We’ll help you set upa nozzle maintenanceprogramSpraying Systems Co. will offerassistance in developing a goodspray nozzle maintenanceprogram for your spray installa-tion. Simply contact your localrepresentative. Their years ofapplications experience in manyindustries, along with the tech-nological back-up available fromSpraying Systems Co.’sTechnical Services, can help youdevelop and sustain a qualityspray program.
The first step is an on-siteevaluation of your sprayingoperation. Our sales engineercan help you identify hiddenspray problems that could bewasting your money, materials,time and contributing to defectsin your finished product.
We’ve also developed educa-tional materials and programs to help you set up your nozzlemaintenance program:
Spray Nozzle MaintenanceHandbook. This valuable, 56-page, illustrated booklet providesa wealth of information about
spray nozzle performanceproblems, causes and solutions.It also includes a handyworksheet to help you calculateenergy and materials costs ofpoor spray nozzle performance.A copy is yours for the asking.
Spray Nozzle MaintenanceVideo. Spraying Systems Co.has produced a video program,Saving Dollars Using CommonSense. This 10-minute programprovides an excellent overviewof “hidden” nozzle problems —how to detect them and how toavoid them. The program isavailable from your local sales
representative.
Why put off proper nozzle main-tenance? The benefits of morecost-effective spraying could be yours immediately. Call yourSpraying Systems Co. salesrepresentative today to getstarted.
Uniform spray distribution across a header or manifold is demonstrated on a spray collection table. If even one spray nozzle is defective, the faulty spray pattern will affect the distribution, which can be a serious problem in most applications.
nstall and remove spray tips in seconds…WITH AUTOMATIC ALIGNMENT…WITHOUT TOOLS.
The patented QuickJet System is a job provenbreakthrough in spray tip maintenance…saving timein cleaning and replacement of spray tips…a majorcost saving innovation for industrial washing, coatingand cooling applications…or anywhere fast, accurate,easy spray tip changing is important, especially in dif-ficult to reach areas or where a hostile environment isencountered.
Asection
Spray nozzle system
I
Inlet Pipe Conn. NPT or
BSPT (M)
INNOVATIVE… SIMPLE… QUICK… VERSATILE…
Pipe Inlet StandardConnection Body Type (M)
NPT or BSPT QQ QJJS1⁄8 ⓦ ⓦ1⁄4 ⓦ ⓦ3⁄8 ⓦ
1⁄8 QPP-VI 1⁄8)1⁄4 QPP-VI 1⁄4)3⁄8 QPP-VI 3⁄8)
1⁄4 x QJ 1⁄43⁄8 x QJ 3⁄81⁄2 x QJ 1⁄2
Pipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT orBSPT QJ QJL QJJS QJJ QJJL
1⁄8 ⓦ ⓦ ⓦ1⁄4 ⓦ ⓦ ⓦ3⁄8 ⓦ ⓦ ⓦ ⓦ1⁄2 ⓦ ⓦ ⓦ ⓦ
SPLIT-EYELETQUICKJET
BODYORDER
NO.
A2
QU
ICK
JE
T S
YS
TE
M
SPRAY NOZZLE SYSTEM
TO CLAMP ON
Material Code
KY = KYNAR
Material CodePolypropylene (body)VI = VITON (seal)
Material Codes
no material code = Brass body with plated steel bolts and clamps.
SS = Stainless Steel body with Stainless Steel bolts and clamps.
Material Codes
no material code = Brass
SS = 303 Stainless Steel
316SS = 316 Stainless Steel
KY = KYNAR (QJJS only)
Material Codes
no material code = Brass
SS = 303 Stainless Steel
316SS = 316 Stainless Steel
QuickJetAdjustableBall FittingBody Type
STANDARD BODIES SPLIT-EYELET BODIES ADJUSTABLE BALLFITTING BODIES
KYNAR BODIESProMax® BODIES
BodySub-assembly
ORDERING INFORMATION
ORDERING INFORMATION
ORDERING INFORMATIONORDERING INFORMATION
ORDERING INFORMATION
Male threaded QuickJetKYNAR bodies readily adapt tomost manifold and header instal-lations. The bodies are made ofKYNAR PVDF thermoplastic foruse in the electronics industry.All QuickJet bodies in KYNARcome standard with VITONseals assuring a positive fit ofthe spray tips.
ProMax bodies are molded of a chemically-coupled, glass-reinforced, engineering grade of polypropylene that combinesdurability with chemical resis-tance.They feature a uniquelocking system that allows thespray tip to be inserted by hand,and locked into correct alignmentautomatically.The body isavailable with 1Ú8), 1Ú4), and 3Ú8)male inlet connections.
COMPLETE QUICKJETKYNAR NOZZLE
BODY/SEALSPRAY
1/4 QQ-KY + TIP
PipeSize
BodyType
MaterialCode
COMPLETE QUICKJETPROMAX NOZZLE
BODY/SEALSPRAY
1/4 QPP-VI + TIP
PipeSize
BodyType
SealMaterial
Code
COMPLETE SPLIT-EYELETQUICKJET NOZZLE
BODY/SEALSPRAY
2 QJSE-SS + TIP
PipeSize
BodyType
MaterialCode
COMPLETE STANDARDQUICKJET NOZZLE
BODY/SEALSPRAY
1/4 QJJ-SS + TIP
PipeSize
BodyType
MaterialCode
COMPLETE ADJUSTABLEBALL FITTING
QUICKJET NOZZLEBODY/SEAL
SPRAY1/4 x QJ-SS + TIP
PipeSize
BodyType
MaterialCode
Male & Female threadedQuickJet bodies readily adaptto most manifold and headerinstallations. The bodies areprecision-machined from stain-less steel or brass, and can beproduced in other materialsupon request, seal included.
Split-Eyelet QuickJet bodiesprovide a quick and easy way tomount QuickJet spray tips to amanifold or header. The assem-bly consists of QuickJet bodyand seal, clamps, bolts andgasket. The gasket, made ofBuna-N material, provides aleak-proof seal. Write for DataSheet 19208.
Adjustable Ball Fitting TypeQuickJet nozzle bodies provideadjustable positioning of QuickJetspray tips within a 50¡ includedangle of adjustment. Lockingscrews hold the adjustment posi-tion even when jarred or sub-jected to vibration. Seal included.Write for Data Sheet 23286.
All orders for standard QuickJetbodies are shipped with thenecessary seals. Please use the compatibility chart for correctbody/tip selection.
TIP/BODY COMPATIBILITY
Body Series: Tip SeriesQJJS with Q S ______QJ/QJJ/QJSE with Q ________QJL/QJJL with Q L ______
3/4 QJSE 1) * *
3/4 QJSE-SS 11⁄16)3⁄4
1 QJSE 11⁄8) * *11⁄4) 1
1 QJSE-SS 13⁄8)
11/4 QJSE 19⁄16)** **
11/4 QJSE-SS 111⁄16)11⁄4
11/2 QJSE 13⁄4)** **
11/2 QJSE-SS 2)11⁄2
2 QJSE 21⁄8)** **
2 QJSE-SS 23⁄8) 2
TubingO.D.
PipeSize
* = 1⁄2) Drill Hole** = 11⁄16) Drill Hole
Inlet ConnectionNPT or BSPT
1⁄8QPP-VIQPPlug-VI1⁄4QPP-VI QP PlugQPPlug-BU3⁄8QPP-VI
ADAPTER PART NO.
ADAPTER PART NO.BODYSERIES Brass Stainless SteelQJ, QJJ QJ x 11⁄16-16 QJ x 11⁄16-16-SS
SPRAY TIP INDEX:SPRAY PATTERN PAGE
Hollow Cone ............A4 – A7
Full Cone................A8 – A16
Flat Spray.............A17 – A26
Plug Plug withAlone Optional Seal
PLUG PART NO.
A3
QU
ICK
JE
T S
YS
TE
M
STD. ProMax KYNAR FOR STANDARDNOZZLES
FOR UNIJET SPRAY TIPS FOR STD.BODIES
FOR ProMaxBODIES
SPRAY TIPS ADAPTERS ADAPTERS PLUGS
STANDARD KYNARProMax®
PRECISION ENGINEERED 3-PIECE ASSEMBLIES
STANDARD QuickJet spray tipsare precision-machined in stain-less steel or brass. Available inall popular spray patterns.Designed for quick connectspeed and convenience, withautomatic alignment.
ProMax QuickJet spray tips aremolded from an engineeringgrade of polypropylene, color-coded by flow rate. Spray tipsare available in flat or full conespray patterns. Quick changeconvenience with automaticalignment.
KYNAR QuickJet spray tipsfeature KYNAR PVDF thermo-plastic for chemical and heatresistance. Widely used in PCBoard production. Spray tips areavailable in flat or full cone spraypatterns. Quick connect designmakes tip changing fast.
NOZZLE BODIES are availablein 303 or 316 stainless steel orbrass. Male or female threads in1⁄8), 1⁄4), 3⁄8), and 1⁄2) sizes.
VITON seals are standard instainless steel bodies with Buna-N Seals standard for brassbodies. Both provide a tightsealing action to assure positivefitting of the spray tip.
SPRAY TIPS in 303 or 316 stain-less steel or brass are availablein a wide range of capacities forflat, hollow cone, and full conepatterns. Each tip is precision-machined for flow rate and spraypattern accuracy.
NOZZLE BODIES are molded of ProMax, a chemically-coupled, engineering grade ofpolypropylene. Available withNPT or BSPT male threads in1⁄8), 1⁄4), and 3⁄8) sizes.
VITON internal O-ring provides a positive seal between tip andbody.
OPTIONAL EXTERNAL O-RINGprotects nozzle against contam-inants in harsh environments.
SPRAY TIPS are color-coded forflow rate identification. Spray tipsare available in flat or full conespray patterns.
NOZZLE BODIES are made of heat and chemical-resistantKYNAR PVDF thermoplastic. Malethreads come in 1⁄8), 1⁄4), and 3⁄8) sizes.
VITON Seals are standard withall KYNAR bodies. OptionalEPDM seals are also available.Both seals provide a tightsealing action to assure positivefitting of the spray tip.
SPRAY TIPS are made of KYNARPVDF thermoplastic. They areavailable in flat spray or full conespray patterns. Each tip ismatched to the nozzle body forfast installation and automaticalignment.
An adapter is available to accommodate the wide range of standard Spraying Systemsnozzles with NPT and BSPT pipethreads. The standard threadednozzle fitted into the adapterbecomes a QuickJet unit thatprovides fast installation andremoval. One time adjustment ofthe threaded nozzle within theadapter assures positive align-ment and correct positioningwhen reinstalled after cleaning.Write for Data Sheet 19220.
The UniJet adapter convertsUniJet spray tips to the QuickJetSystem. The adapter accom-modates both the threaded capthat holds the UniJet tip, as wellas strainers, check valves,fittings and other UniJet options.
The QuickJet plug tip can beused to conveniently shut offindividual nozzles. Write forData Sheet 19220.
BODYSERIES Brass Stainless Steel
QJ, QJJ QJ Plug QJ Plug-SS
QJL, QJJL QJL Plug QJL Plug-SS
ProMaxBODY
SERIES
PLUG PART NO.
BODYSERIES Brass Stainless
SteelQJ 1⁄8 QJ x 1⁄8F QJ x 1⁄8F-SSQJJ 1⁄4 QJ x 1⁄4F QJ x 1⁄4F-SS
QJL 3⁄8 QJL x 3⁄8F QJLx 3⁄8F-SSQJJL 1⁄2 QJL x 1⁄2F QJLx 1⁄2F-SS
CONN.NPT orBSPT
(F)
VI = VITON, BU = Buna-N
Spray Characteristics
QUICK SPRAY NOZZLE TIPSSTANDARD ANGLE (SMALL CAPACITY)
A4
QU
ICK
JE
T S
YS
TE
MH
OLL
OW
CO
NE
QAQuick WhirlJetspray nozzle tip
(standard connection)
QLAQuick WhirlJetspray nozzle tip
(large connection)
QJ AND QJLFEMALE BODIES
QJJ AND QJJLMALE BODIES
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
ⓦ Washing gas and air toremove fly ash and other products of combustion
ⓦ Gas cooling
ⓦ Water cooling
ⓦ Metal treating
ⓦ Product degreasing
ⓦ Suppression and control of fugitive dust
ⓦ Brine spraying
ⓦ Water aerating
DESIGN FEATURESQA and QLA series smallcapacity Quick WhirlJet spraytips feature removable caps,original design whirlchambers,and uniform spray distributionÉplus the convenience of quick-connect 1Ú4 turn installation andaccurate automatic alignment.
Many additional capacities andspray angles are obtained byinterchanging capsÉask forData Sheets 3055, 3986, 3987,15350 & 15362M for performancedata on other combinations.
ORDERING INFORMATION
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
COMMON APPLICATIONSPipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT orBSPT QJ QJL QJJ QJJL
1⁄8 ⓦ ⓦ1⁄4 ⓦ ⓦ3⁄8 ⓦ ⓦ ⓦ ⓦ1⁄2 ⓦ ⓦ ⓦ ⓦ
COMPLETE QUICKJET NOZZLE
SPRAY TIPNOZZLEBODY + QA - SS 10
TipType
MaterialCode
CapacitySize
Body CAPACITY SPRAYNozzle QUICK
CapacityInlet Orifice (gallons per minute) ANGLEInlet WHIRLJET
SizeDiam. Diam.
Conn. TIP TYPENom. Nom.
3 5 10 15 20 30 40 60 80 100 7 20 80NPT or BSPTQA QLA Inches Inches
psi psi psi psi psi psi psi psi psi psi psi psi psi
ⓦ 0.5 1⁄32 3⁄64 .05 .06 .07 .09 .10 .12 .14 .16 34° 50° 69°ⓦ 1 1⁄16 1⁄16 .10 .12 .14 .17 .20 .24 .28 .31 53° 67°ⓦ 2 5⁄64 5⁄64 .20 .25 .28 .35 .40 .48 .56 .63 48° 62° 71°1⁄8, 1⁄4, 3⁄8, 1⁄2 ⓦ 3 3⁄32 3⁄32 .21 .30 .37 .42 .52 .60 .73 .85 .95 51° 65° 78°ⓦ 5 9⁄64 9⁄64 .27 .35 .50 .61 .70 .86 1.0 1.2 1.4 1.6 63° 73° 79°ⓦ 8 5⁄32 5⁄32 .44 .56 .80 .98 1.1 1.4 1.6 2.0 2.3 2.5 61° 69° 73°ⓦ 10 3⁄16 11⁄64 .55 .71 1.0 1.2 1.4 1.7 2.0 2.5 2.8 3.2 63° 70° 74°
1⁄4, 3⁄8, 1⁄2 ⓦ 15 15⁄64 13⁄64 .82 1.1 1.5 1.8 2.1 2.6 3.0 3.7 4.2 4.7 63° 71° 72°ⓦ 20 9⁄32 1⁄4 1.1 1.4 2.0 2.4 2.8 3.5 4.0 4.9 5.6 6.3 63° 70° 74°ⓦ 25 19⁄64 19⁄64 1.4 1.8 2.5 3.1 3.5 4.3 5.0 6.1 7.1 7.9 63° 70° 74°ⓦ 30 21⁄64 5⁄16 1.6 2.1 3.0 3.7 4.2 5.2 6.0 7.3 8.5 9.5 63° 70° 74°
3⁄8, 1⁄2 ⓦ 15-30.1 15⁄64 5⁄16 1.3 1.6 2.3 2.8 3.2 4.0 4.6 5.6 6.5 7.3 40° 50° 54°ⓦ 25-30.1 19⁄64 5⁄16 1.5 2.0 2.8 3.4 4.0 4.8 5.6 6.9 8.0 8.9 40° 47° 51°ⓦ 50-50.1 11⁄32 3⁄8 2.7 3.5 5.0 6.1 7.1 8.7 10.0 12.3 14.2 15.8 40° 47° 50°ⓦ 50-50.3 11⁄32 3⁄8 2.7 3.5 5.0 6.1 7.1 8.7 10.0 12.3 14.2 15.8 72° 76° 78°ⓦ 40 3⁄8 23⁄64 2.2 2.8 4.0 4.9 5.7 6.9 8.0 9.8 11.3 12.6 72° 76° 78°
1⁄2 ⓦ 50 3⁄8 7⁄16 2.7 3.5 5.0 6.1 7.1 8.5 10.0 12.3 14.2 15.8 74° 79° 82°ⓦ 60 3⁄8 33⁄64 3.3 4.3 6.0 7.3 8.5 10.4 12.0 14.7 17.0 19.0 77° 82° 86°Material Material Codes
no material code = Brass
SS = 303 Stainless Steel
B LNozzle A Hex C H WeightType Max. Min. Max.
QJ + QA 17⁄8) 1) 7⁄8) 15⁄32) 21⁄16) 21⁄4) 5 oz.QJJ + QA 113⁄16) 7⁄8) 7⁄8) 15⁄32) 21⁄8) 23⁄16) 4 oz.QJL + QLA 23⁄16) 11⁄8) 13⁄16) 15⁄16) 21⁄2) 29⁄16) 7 oz.QJJL + QLA 27⁄32) 11⁄8) 13⁄16) 15⁄16) 29⁄16) 219⁄32) 7 oz.
Q QQ Q
QUICK SPRAY NOZZLE TIPSWIDE ANGLE (SMALL CAPACITY)
HO
LLO
W C
ON
E
A5
QU
ICK
JE
T S
YS
TE
M
QJ AND QJLFEMALE BODIES
QJJ AND QJJLMALE BODIES
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
ⓦ Washing gas and air toremove fly ash and other products of combustion
ⓦ Gas cooling
ⓦ Water cooling
ⓦ Metal treating
ⓦ Product degreasing
ⓦ Suppression and control offugitive dust
ⓦ Brine spraying
ⓦ Water aerating
DESIGN FEATURESQA-W and QLA-W series smallcapacity Quick WhirlJet spraytips feature a hollow cone spraypattern with a ring-shapedimpact area and spray angles of88¡ to 144¡Éplus the conve-nience of quick-connect.
Additional capacities and sprayangles can be obtained by inter-changing capsÉask for DataSheets 5412, 5414 and 15356Mon other performance data.
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
COMMON APPLICATIONS
ORDERING INFORMATIONCOMPLETE
QUICKJET NOZZLE
SPRAY TIPNOZZLEBODY + QA - SS 5-5W
TipType
MaterialCode
CapacitySize
QA-WQuick WhirlJetspray nozzle tip
(standard connection)
QLA-WQuick WhirlJetspray nozzle tip
(large connection)
Pipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT orBSPT QJ QJL QJJ QJJL
1⁄4 ⓦ ⓦ3⁄8 ⓦ ⓦ ⓦ ⓦ1⁄2 ⓦ ⓦ ⓦ ⓦ
Body CAPACITY SPRAYNozzle QUICK
CapacityInlet Orifice (gallons per minute) ANGLEInlet WHIRLJET
SizeDiam. Diam.
Conn. TIP TYPENom. Nom.
5 7 10 15 20 30 40 60 80 10 20 80NPT or BSPTQA QLA Inches Inches
psi psi psi psi psi psi psi psi psi psi psi psi
ⓦ 1-1W 1⁄16 1⁄16 .10 .12 .14 .17 .20 .25 .28 110° 117° 111°ⓦ 1-5W 1⁄16 1⁄8 .17 .21 .24 .29 .34 .42 .48 100° 123° 124°ⓦ 1-10W 1⁄16 11⁄64 .21 .26 .30 .36 .42 .51 .60 140° 144° 139°ⓦ 1-15W 1⁄16 7⁄32 .24 .29 .34 .42 .48 .59 .68 105° 128° 132°ⓦ 2-5W 5⁄64 1⁄8 .29 .34 .42 .49 .60 .68 .84 .89 118° 123° 113°ⓦ 2-10W 5⁄64 11⁄64 .35 .41 .51 .59 .72 .82 1.0 1.2 138° 136° 126°1⁄4, 3⁄8, 1⁄2 ⓦ 5-5W 9⁄64 1⁄8 .42 .50 .61 .71 .86 1.0 1.2 1.4 114° 113° 104°ⓦ 5-10W 9⁄64 11⁄64 .46 .54 .65 .80 .92 1.1 1.3 1.6 1.8 130° 130° 119°ⓦ 5-15W 9⁄64 7⁄32 .52 .64 .77 .94 1.1 1.3 1.5 1.8 2.2 130° 132° 120°ⓦ 8-10W 5⁄32 11⁄64 .64 .75 .90 1.1 1.3 1.6 1.8 2.2 2.5 129° 122° 103°ⓦ 10-10W 3⁄16 11⁄64 .71 .84 1.0 1.2 1.4 1.7 2.0 2.5 2.8 120° 108° 95°ⓦ 8-15W 5⁄32 7⁄32 .78 .92 1.1 1.4 1.6 1.9 2.2 2.7 3.1 129° 122° 107°ⓦ 10-15W 3⁄16 7⁄32 .86 1.0 1.2 1.5 1.7 2.1 2.4 3.0 3.4 120° 108° 97°ⓦ 15-15W 15⁄64 7⁄32 1.1 1.3 1.5 1.8 2.1 2.6 3.0 3.7 4.2 101° 95° 88°
ⓦ 15-15W 15⁄64 7⁄32 1.1 1.3 1.5 1.8 2.1 2.6 3.0 3.7 4.2 116° 106° 95°ⓦ 15-20W 15⁄64 15⁄64 1.2 1.5 1.7 2.1 2.5 3.0 3.5 4.3 4.9 113° 108° 98°ⓦ 20-20W 9⁄32 15⁄64 1.4 1.7 2.0 2.4 2.8 3.5 4.0 4.9 5.6 106° 102° 95°3⁄8, 1⁄2 ⓦ 15-30W 15⁄64 5⁄16 1.6 1.8 2.2 2.7 3.1 3.8 4.4 5.4 6.2 116° 110° 102°ⓦ 25-25W 19⁄64 19⁄64 1.8 2.1 2.5 3.1 3.5 4.3 5.0 6.1 7.1 105° 100° 93°ⓦ 25-30W 19⁄64 5⁄16 2.0 2.3 2.8 3.4 4.0 4.9 5.6 6.9 7.9 105° 101° 94°1⁄2 ⓦ 50-50W 3⁄8 7⁄16 3.5 4.2 5.0 6.1 7.1 8.6 10.0 12.3 14.2 110° 102° 93°
Material Material Codesno material code = Brass
SS = 303 Stainless Steel
B LNozzle A Hex C H WeightType Max. Min. Max.
QJ + QA 17⁄8) 1) 7⁄8) 15⁄32) 21⁄16) 21⁄4) 5 oz.QJJ + QA 113⁄16) 7⁄8) 7⁄8) 15⁄32) 21⁄8) 23⁄16) 4 oz.QJL + QLA 23⁄16) 11⁄8) 13⁄16) 15⁄16) 21⁄2) 29⁄16) 7 oz.QJJL + QLA 27⁄32) 11⁄8) 13⁄16) 15⁄16) 29⁄16) 219⁄32) 7 oz.
Q QQ Q
QUICK SPRAY NOZZLE TIP9360 SERIESCENTER POST STYLE (POLYPROPYLENE)
A6
QU
ICK
JE
T S
YS
TE
MH
OLL
OW
CO
NE
ⓦ Water cooling
ⓦ Aerating
ⓦ Wetting
ⓦ Chemical processes
DESIGN FEATURES
PERFORMANCE DATA
DIMENSIONS & WEIGHTSCOMMON APPLICATIONS
QAPQuick WhirlJet polypropylene
spray nozzle tip(standard connection)
The QAP spray nozzle tips aremolded in fiberglass reinforcedpolypropylene for good strengthand corrosion resistance at temperatures to 160¡F (71¡C).Automatic spray pattern alignmentwith 1Ú4 turn quick installation.
Pipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT or BSPT QJ QJJ
1⁄4 ⓦ ⓦ3⁄8 ⓦ ⓦ1⁄2 ⓦ ⓦ
NozzleType
DIMENSIONS
CapacitySize
NozzleInlet
Conn.NPT or BSPT
1⁄4, 3⁄8, 1⁄2
SPRAYANGLE
53°61°63°71°72°77°81°58°55°72°73°81°83°90°
57°70°80°80°83°88°60°65°73°78°84°55°60°70°76°78°
55°65°70°78°
70°76°81°87°94°
100°103°67°79°82°88°94°93°
100°61°68°75°78°87°91°98°68°72°81°84°89°64°64°76°81°85°65°68°75°72°80°
80°83°90°95°
104°111°113°76°80°86°92°97°
100°107°67°69°79°82°89°95°
102°71°74°81°87°92°67°66°75°79°98°60°64°71°75°82°
Material Code: PP = Polypropylene
QJFEMALE BODY
QJJMALE BODY
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
2 5⁄64 5⁄64
2-3 5⁄64 3⁄32
2-5 5⁄64 7⁄64
2-8 5⁄64 9⁄64
2-10 5⁄64 11⁄64
2-15 5⁄64 13⁄64
2-20 5⁄64 15⁄64
3-2 3⁄32 5⁄64
3 3⁄32 3⁄32
3-5 3⁄32 7⁄64
3-8 3⁄32 9⁄64
3-10 3⁄32 11⁄64
3-15 3⁄32 13⁄64
3-20 3⁄32 15⁄64
5-2 9⁄64 5⁄64
5-3 9⁄64 3⁄32
5 9⁄64 7⁄64
5-8 9⁄64 9⁄64
5-10 9⁄64 11⁄64
5-15 9⁄64 13⁄64
5-20 9⁄64 15⁄64
8-5 11⁄64 7⁄64
8 11⁄64 9⁄64
8-10 11⁄64 11⁄64
8-15 11⁄64 13⁄64
8-20 11⁄64 15⁄64
10-5 3⁄16 7⁄64
10-8 3⁄16 9⁄64
10 3⁄16 11⁄64
10-15 3⁄16 13⁄64
10-20 3⁄16 15⁄64
15-5 15⁄64 7⁄64
15-8 15⁄64 9⁄64
15-10 15⁄64 11⁄64
15 15⁄64 13⁄64
15-20 15⁄64 15⁄64
InletDiam.Nom.Inches
OrificeDiam.Nom.Inches
CAPACITY(gallons per minute)
3psi
5psi
7psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
.44
.51
.59
.65
.55
.67
.75
.82
.93
.14
.17
.20
.23
.25
.28
.31
.18
.21
.25
.31
.34
.39
.44
.35
.42
.48
.57
.61
.42
.57
.66
.76
.83
.61
.72
.861.0
.851.11.2
.17
.20
.23
.28
.30
.33
.37
.22
.23
.30
.37
.40
.46
.52
.34
.42
.50
.56
.67
.72
.50
.67
.79
.90
.99
.54
.72
.841.01.2
.851.01.31.4
.20
.24
.28
.33
.36
.39
.44
.26
.30
.36
.44
.48
.55
.62
.36
.41
.50
.60
.67
.80
.86
.60
.80
.941.11.2.65.861.01.21.4.761.01.21.51.7
.28
.34
.40
.47
.51
.55
.62
.37
.43
.51
.62
.68
.78
.88
.51
.58
.70
.851.01.11.2.851.11.31.51.7.921.21.41.72.01.11.41.72.12.4
.35
.42
.48
.57
.62
.68
.76
.45
.52
.62
.76
.83
.951.1.62.71.861.01.21.41.51.01.41.61.92.01.11.51.72.12.41.31.82.12.62.9
.40
.48
.56
.66
.72
.78
.88
.52
.60
.72
.88
.961.11.2.72.821.01.21.41.61.71.21.61.92.22.41.31.72.02.42.81.52.02.43.03.4
.49
.59
.69
.81
.88
.961.1.64.73.881.11.21.31.5.881.01.21.51.72.02.11.52.02.32.62.91.62.12.43.03.51.92.52.93.74.2
.57
.68
.79
.931.01.11.2.74.851.01.21.41.61.81.01.21.41.71.92.32.41.72.32.73.13.31.82.42.83.53.92.22.93.44.24.8
.63
.76
.891.01.11.21.4.82.951.11.41.51.72.01.11.31.61.92.12.62.71.92.53.03.43.72.02.73.13.94.42.43.23.84.75.4
7psi
20psi
80psi
A BWeight
1⁄4QJ + QAP 111⁄16) 7⁄8) 7⁄8) 15⁄32) 21⁄16) 2.1 oz.1⁄4QJJ + QAP 1.8 oz.3⁄8QJ + QAP 13⁄4) 7⁄8) 7⁄8) 15⁄32) 21⁄8) 2.3 oz.3⁄8QJJ + QAP 2.0 .oz1⁄2QJ + QAP 17⁄8) 1) 7⁄8) 15⁄32) 21⁄4) 3.0 oz.1⁄2QJJ + QAP 113⁄16) 7⁄8) 7⁄8) 15⁄32) 23⁄16) 2.6 oz.
C H L
QUICK SPRAY NOZZLE TIP9360 SERIES/WIDE SPRAYCENTER POST STYLE (POLYPROPYLENE)
HO
LLO
W C
ON
E
A7
QU
ICK
JE
T S
YS
TE
M
QJFEMALE BODY
QJJMALE BODY
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
ⓦ Water cooling
ⓦ Aerating
ⓦ Wetting
ⓦ Chemical processes
NozzleType
DIMENSIONS
CapacitySize
NozzleInlet
Conn.NPT orBSPT
1⁄4, 3⁄8, 1⁄2
SPRAYANGLE
126°121°121°120°111°133°133°128°128°119°125°125°125°130°125°119°112°115°121°121°115°110°111°113°118°
102°107°110°112°
135°133°135°133°132°131°131°130°130°134°112°112°118°125°125°102°100°102°110°113°98°95°97°
104°107°91°93°97°98°
105°
131°130°127°132°135°109°110°115°118°136°98°97°
102°105°112°99°87°90°98°
106°85°84°89°97°
102°80°80°83°90°
100°
Material Code: PP = Polypropylene
QAP-WQuick WhirlJet polypropylene
spray nozzle tip(standard connection)
DESIGN FEATURESThe QAP-W spray nozzle tipsfeature a wide hollow cone spraypattern with a ring-shapedimpact area. They are molded ofhighly durable polypropylene towithstand temperatures up to160¡F (71¡C)Éplus very strongand corrosion-resistant.
PERFORMANCE DATA
DIMENSIONS & WEIGHTSCOMMON APPLICATIONS
ORDERING INFORMATIONQUICKJET
COMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + QAP - PP - 10 - 10W
TipType
MaterialCode
CapacitySize
Pipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT orBSPT QJ QJJ
1⁄4 ⓦ ⓦ3⁄8 ⓦ ⓦ1⁄2 ⓦ ⓦ
2-5W 5⁄64 1⁄82-8W 5⁄64 5⁄32
2-10W 5⁄64 11⁄64
2-15W 5⁄64 7⁄32
2-20W 5⁄64 15⁄64
3-5W 3⁄32 1⁄83-8W 3⁄32 5⁄32
3-10W 3⁄32 11⁄64
3-15W 3⁄32 7⁄32
3-20W 3⁄32 15⁄64
5-5W 9⁄64 1⁄85-8W 9⁄64 5⁄32
5-10W 9⁄64 11⁄64
5-15W 9⁄64 7⁄32
5-20W 9⁄64 15⁄64
8-5W 11⁄64 1⁄88-8W 11⁄64 5⁄32
8-10W 11⁄64 11⁄64
8-15W 11⁄64 7⁄32
8-20W 11⁄64 15⁄64
10-5W 3⁄16 1⁄810-8W 3⁄16 5⁄32
10-10W 3⁄16 11⁄64
10-15W 3⁄16 7⁄32
10-20W 3⁄16 15⁄64
15-5W 15⁄64 1⁄815-8W 15⁄64 5⁄32
15-10W 15⁄64 11⁄64
15-15W 15⁄64 7⁄32
15-20W 15⁄64 15⁄64
InletDiam.Nom.Inches
OrificeDiam.Nom.Inches
CAPACITY(gallons per minute)
3psi
5psi
7psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
.44
.50
.59
.65
.55
.67
.75
.82
.93
.20
.22
.24
.27
.30
.25
.30
.37
.40
.42
.35
.42
.48
.57
.61
.42
.57
.64
.76
.83
.61
.72
.861.0
.851.11.2
.23
.26
.28
.32
.35
.30
.35
.44
.47
.49
.42
.50
.56
.67
.72
.50
.67
.76
.90
.99
.54
.72
.841.01.2
.851.01.31.4
.28
.31
.34
.38
.42
.36
.42
.52
.56
.59
.50
.60
.67
.80
.86
.60
.80
.911.11.2.65.861.01.21.4.761.01.21.51.7
.40
.44
.48
.54
.60
.51
.60
.74
.79
.83
.70
.851.01.11.2.851.11.31.51.7.921.21.41.72.01.11.41.72.12.4
.48
.54
.59
.66
.73
.62
.73
.90
.971.0.861.01.21.41.51.01.41.61.92.01.11.51.72.12.41.31.82.12.62.9
.56
.62
.68
.76
.84
.72
.841.01.11.21.01.21.41.61.71.21.61.82.22.41.31.72.02.42.81.52.02.43.03.4
.69
.76
.83
.931.0.881.01.31.41.51.21.51.72.02.11.52.02.22.62.91.62.12.43.03.51.92.52.93.74.2
.79
.88
.961.11.21.01.21.51.61.71.41.71.92.32.41.72.32.63.13.31.82.42.83.53.92.22.93.44.24.8
.89
.981.11.21.31.11.31.61.81.91.61.92.12.62.71.92.52.93.43.72.02.73.13.94.42.43.23.84.75.4
7psi
20psi
80psi
A BWeight
1⁄4QJ+QAP-W 111⁄16) 7⁄8) 7⁄8) 15⁄32) 21⁄16) 2.1 oz.1⁄4QJJ+QAP-W 1.8 oz.3⁄8QJ+QAP-W 13⁄4) 7⁄8) 7⁄8) 15⁄32) 21⁄8) 2.3 oz.3⁄8QJJ+QAP-W 2.0 oz.1⁄2QJ+QAP-W 17⁄8) 1) 7⁄8) 15⁄32) 21⁄4) 3.0 oz.1⁄2QJJ+QAP-W 111⁄16) 7⁄8) 7⁄8) 15⁄32) 23⁄16) 2.6 oz.
C H L
Material Material Codesno material code = Brass
SS = 303 Stainless Steel
Nozzle Length Hex. WeightType Min. Max. Max
QJ + QG 21⁄8) 213⁄32) 1) 5 oz.QJJ + QG 21⁄4) 25⁄16) 7⁄8) 41⁄2 oz.QJL + QLG 221⁄32) 225⁄32) 11⁄8) 8 oz.QJJL + QLG 225⁄32) 227⁄32) 11⁄8) 71⁄2 oz.
A8
QU
ICK
JE
T S
YS
TE
MFU
LL C
ON
EQUICK SPRAY NOZZLE TIPSSTANDARD SPRAY ANGLE
QGQuick FullJet
spray nozzle tip(standard connection)
QLGQuick FullJet
spray nozzle tip(large connection)
QG and QLG series QuickFullJet spray tip assemblies feature removable caps andvanes. When combined with aQuickJet nozzle body, these tips allow quick-connect 1Ú4 turninstallation without the use of tools.
These Quick FullJet spray tipassemblies feature a solid cone-shaped spray pattern with around impact area. The sprayangles of 43¡ to 106¡ areproduced in a uniform spray ofmedium to large sized dropletsover a wide range of flow ratesand pressures.
ⓦ Washing & rinsing processes
ⓦ Quenching & cooling of coke,primary metals and other materials
ⓦ Suppression of fugitive dust in the processing of bulk ores, coal, limestone, sand and gravel
ⓦ Scrubbing, washing andcooling of flue gases toremove fly ash and other products of combustion
ⓦ Breaking up and deaeratingfoam
QUICKJETCOMPLETE NOZZLE
SPRAY TIP
+ QG - SS - 10Tip Type Material
CodeCapacity
Size
NOZZLEBODY
Pipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT orBSPT QJ QJL QJJ QJJL
1⁄8 ⓦ ⓦ1⁄4 ⓦ ⓦ3⁄8 ⓦ ⓦ1⁄2 ⓦ ⓦ ⓦ ⓦ
52°43°52°43°52°45°58°45°64°87°48°64°72°88°
58°65°50°65°50°65°50°67°50°67°90°50°67°75°91°
53°59°46°59°46°59°46°61°46°61°82°46°61°68°83°
NozzleInlet
Conn.NPT orBSPT
QUICKFULLJETTIP TYPE
QG QLG
CapacitySize
SPRAYANGLE
*Foreign matter with maximum diameter as listedcan pass through nozzle without clogging.Q Q
Q Q
ORDERING INFORMATION
COMMON APPLICATIONS
DESIGN FEATURES
DIMENSIONS & WEIGHTS
QJ AND QJLFEMALE BODIES
QJJ AND QJJLMALE BODIES
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
CAPACITY(gallons per minute)
5psi
7psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
.14
.22
.25
.36
.47
.73
.691.11.61.21.82.32.9
.13
.17
.26
.30
.42
.55
.85
.801.31.91.42.12.73.2
.10
.15
.20
.30
.35
.50
.651.0.951.52.21.62.53.24.0
.14
.21
.28
.42
.48
.69
.891.41.32.13.02.23.54.45.5
.17
.25
.34
.50
.58
.821.11.71.62.53.72.74.25.36.6
.19
.29
.38
.57
.67
.951.31.91.82.94.23.14.86.17.6
.23
.35
.46
.69
.811.21.52.42.23.55.13.75.87.49.2
.26
.40
.53
.79
.921.31.72.72.54.05.84.36.78.5
10.6
.30
.44
.59
.881.01.51.93.02.84.46.44.77.49.4
11.8
.36
.53
.701.11.31.82.33.63.45.37.85.78.9
11.314.3
ⓦ 1 1⁄32 .025ⓦ 1.5 3⁄64 .025ⓦ 2 3⁄64 .0401⁄8, 1⁄4, 3⁄8, 1⁄2 ⓦ 3 1⁄16 .040ⓦ 3.5 1⁄16 .050ⓦ 5 5⁄64 .050ⓦ 6.5 3⁄32 1⁄161⁄4, 3⁄8, 1⁄2 ⓦ 10 7⁄64 1⁄16
ⓦ 9.5 7⁄64 3⁄323⁄8, 1⁄2 ⓦ 15 9⁄64 3⁄32ⓦ 22 3⁄16 7⁄64
ⓦ 16 9⁄64 1⁄8ⓦ 25 3⁄16 1⁄81⁄2 ⓦ 32 13⁄64 9⁄64ⓦ 40 1⁄4 9⁄64
Maxi-mumFree
PassageDiam.*Inches
OrificeDiam.Nom.Inches 7
psi20psi
80psi
PERFORMANCE DATA
QUICK SPRAY NOZZLE TIPSSTANDARD SPRAY ANGLE
1⁄8, 1⁄4, 3⁄8, 1⁄2 ⓦ 3.5 1⁄16 .050ⓦ 6.5 3⁄32 1⁄161⁄4, 3⁄8, 1⁄2 ⓦ 10 7⁄64 1⁄16
ⓦ 15 9⁄64 3⁄323⁄8, 1⁄2 ⓦ 22 11⁄64 7⁄64
1⁄2 ⓦ 25 3⁄16 1⁄8Material Material Codes
no material code = Brass
SS = 303 Stainless Steel
Length HexNozzleMin. Max. Max. WeightType
QJ + QH 121⁄32) 115⁄16) 1) 21⁄2 oz.QJJ + QH 13⁄4) 127⁄32) 1) 2 oz.QJL + QLH 23⁄32) 27⁄32) 11⁄8) 41⁄2 oz.QJJL + QLH 27⁄32) 21⁄4) 11⁄8) 41⁄2 oz.
FULL
CO
NE
A9
QU
ICK
JE
T S
YS
TE
M
QJ AND QJLFEMALE BODIES
QJJ AND QJJLMALE BODIES
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
QHQuick FullJet
spray nozzle tip(standard connection)
QLHQuick FullJet
spray nozzle tip(large connection)
The QH and QLH Quick FullJetnozzles produce a full cone spraypattern with spray angles from43¡ to 90¡ depending on tip capac-ity and pressure.These nozzlesfeature a non-removable vanethat contributes to uniform distrib-ution across the impact area.
The spray tips are easilyinstalled into or removed fromthe QuickJet bodies, for speedand convenience. The modelQLH, with its larger size andconnection, is rated for larger 3.5 gpm (13.3 l/min) capacityapplications.
Pipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT orBSPT QJ QJL QJJ QJJL
1⁄8 ⓦ ⓦ1⁄4 ⓦ ⓦ3⁄8 ⓦ ⓦ1⁄2 ⓦ ⓦ ⓦ ⓦ
ⓦ Cooling and quenching
ⓦ Product washing
ⓦ Air and gas washing
ⓦ Gas cooling
ⓦ Dust control
ⓦ Gas scrubbing
ⓦ Fire protection
QUICKJETCOMPLETE NOZZLE
SPRAY TIP
+ QH - SS - 15Tip Type Material
CodeCapacity
Size
NOZZLEBODY
ORDERING INFORMATION
COMMON APPLICATIONS
DESIGN FEATURES
DIMENSIONS & WEIGHTS
PERFORMANCE DATA
NozzleInlet
Conn.NPT orBSPT
QUICKFULLJETTIP TYPE
QH QLH
CapacitySize
SPRAYANGLE
Q*Foreign matter with maximum diameter as listedcan pass through nozzle without clogging.Q
Q Q
CAPACITY(gallons per minute)
5psi
7psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
.25
.47
.731.11.61.8
.30
.55
.851.31.92.1
.35
.651.01.52.22.5
.48
.891.42.13.03.5
.581.11.72.53.74.2
.671.31.92.94.24.8
.811.52.43.55.15.8
.921.72.74.05.86.7
1.01.93.04.46.47.4
1.32.33.65.37.88.9
Maxi-mumFree
PassageDiam.*Inches
OrificeDiam.Nom.Inches 7
psi20psi
80psi
43°45°58°64°87°64°
50°50°67°67°90°67°
46°46°61°61°82°61°
QUICK SPRAY NOZZLE TIPSWIDE ANGLE
Length HexNozzleMin. Max. Max. WeightType
QJ + QH - W 115⁄32) 21⁄16) 1) 31⁄2 oz.QJJ + QH - W 19⁄16) 131⁄32) 1) 31⁄2 oz.QJL + QLH - W 211⁄32) 27⁄16) 11⁄8) 5 oz.QJJL + QLH - W 27⁄16) 21⁄2) 11⁄8) 5 oz.
A10
QU
ICK
JE
T S
YS
TE
MFU
LL C
ON
E
ⓦ Cooling and quenching
ⓦ Product washing
ⓦ Air and gas washing
ⓦ Gas cooling
ⓦ Dust control
ⓦ Gas scrubbing
ⓦ Fire protection
QUICKJETCOMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + QH - SS - 8W
TipType
MaterialCode
CapacitySize
Pipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT orBSPT QJ QJL QJJ QJJL
1⁄8 ⓦ ⓦ1⁄4 ⓦ ⓦ3⁄8 ⓦ ⓦ1⁄2 ⓦ ⓦ ⓦ ⓦ
QH-WQuick FullJet
spray nozzle tip(standard connection)
QLH-WQuick FullJet
spray nozzle tip(large connection)
The QH-W and QLH-W (largerbody style) Quick FullJet nozzlesproduce a full cone spray patternwith spray angles from 102¡ to120¡ depending on tip capacityand pressure.These nozzlesfeature a non-removable vanethat contributes to uniform distri-bution across the impact area.
The spray tips are easily installedinto or removed from theQuickJet bodies for quick andeffortless changeout.The tips forboth the standard and largeversions are available in eitherbrass or stainless steel.
DIMENSIONS & WEIGHTSCOMMON APPLICATIONS
ORDERING INFORMATION
DESIGN FEATURES
PERFORMANCE DATA
120°120°120°112°114°114°114°114°
120°120°120°120°120°120°120°120°
102°102°103°103°103°103°104°112°
NozzleInlet
Conn.NPT orBSPT
QUICKFULLJETTIP TYPE
QH-W QLH-W
CapacitySize
SPRAYANGLE
*Foreign matter with maximum diameter as listed can pass through nozzle without clogging.
QJ AND QJLFEMALE BODIES
QJJ AND QJJLMALE BODIES
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
Q QQ Q
CAPACITY(gallons per minute)
5psi
7psi
10psi
20psi
30psi
40psi
60psi
80psi
.74
.891.01.53.7
.48
.68
.861.01.21.74.3
.28
.56
.801.01.21.42.05.0
.38
.761.11.41.61.92.76.8
.45
.911.31.61.92.33.28.1
.511.01.51.82.22.63.79.2
.611.21.82.22.63.14.4
11.0
.701.42.02.53.03.55.0
12.5
Maxi-mumFree
PassageDiam.*Inches
OrificeDiam.Nom.Inches 7
psi20psi
80psi
ⓦ 2.8W 1⁄16 .040ⓦ 5.6W 3⁄32 .0401⁄8, 1⁄4, 3⁄8, 1⁄2 ⓦ 8W 3⁄32 .050ⓦ 10W 7⁄64 .050ⓦ 12W 1⁄8 .050
1⁄4, 3⁄8, 1⁄2 ⓦ 14W 9⁄64 1⁄16
3⁄8, 1⁄2 ⓦ 20W 11⁄64 3⁄32
1⁄2 ⓦ 50W 17⁄64 5⁄32
Material Material Codesno material code = Brass
SS = 303 Stainless Steel
QUICK SPRAY NOZZLE TIPSSQUARE SPRAY
FULL
CO
NE
A11
QU
ICK
JE
T S
YS
TE
M
ⓦ Cooling and quenching
ⓦ Product washing
ⓦ Air and gas washers
ⓦ Scrubbers
ⓦ Liquor washers
ⓦ Dust control
ⓦ Fire protection
QUICKJETCOMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + QH - SS 12SQ
TipType
MaterialCode
CapacitySize
QH-SQQuick FullJet
spray nozzle tip(standard connection)
QLH-SQQuick FullJet
spray nozzle tip(large connection)
QH-SQ and QLH-SQ QuickFullJet spray tips feature an integral cap and non-removablevane. When combined with aQuickJet nozzle body, these tips allow quick-connect 1Ú4 turninstallation without the use of tools.
The spray nozzle tips feature a solid cone-shaped spray patternÉand are well-suited forinstallations requiring completecoverage of rectangular areas orspray zones. The spray anglesvary from 40¡ to 82¡.
DIMENSIONS & WEIGHTSCOMMON APPLICATIONS
ORDERING INFORMATION
DESIGN FEATURES
PERFORMANCE DATA
40°60°62°70°78°71°78°
52°66°67°75°82°75°82°
47°60°61°68°75°68°75°
NozzleInlet
Conn.NPT orBSPT
QUICKFULLJETTIP TYPE
QH QLH
CapacitySize
SPRAYANGLE
Pipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT orBSPT QJ QJL QJJ QJJL
1⁄8 ⓦ ⓦ1⁄4 ⓦ ⓦ3⁄8 ⓦ ⓦ1⁄2 ⓦ ⓦ ⓦ ⓦ
*Foreign matter with maximum diameter as listed can pass through nozzle without clogging.
QJ AND QJLFEMALE BODIES
QJJ AND QJJLMALE BODIES
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
Q QQ Q
CAPACITY(gallons per minute)
5psi
7psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
.26
.43
.72
.861.11.32.6
.31
.51
.851.01.21.53.1
.36
.601.01.2
1.451.83.6
.50
.831.41.72.02.55.0
.601.01.72.02.43.06.0
.691.11.92.32.83.46.9
.831.42.32.83.34.18.3
.951.62.63.23.84.79.5
1.11.82.93.54.25.3
10.5
1.32.13.54.35.16.4
13.0
ⓦ 3.6SQ 1⁄16 .0501⁄8, 1⁄4, 3⁄8, 1⁄2 ⓦ 6SQ 3⁄32 .050ⓦ 10SQ 7⁄64 1⁄16
1⁄4, 3⁄8, 1⁄2 ⓦ 12SQ 1⁄8 1⁄16ⓦ 14.5SQ .154 1⁄16
3⁄8, 1⁄2 ⓦ 18SQ 5⁄32 3⁄32
1⁄2 ⓦ 36SQ 1⁄4 1⁄8Material Material Codes
no material code = Brass
SS = 303 Stainless Steel
Maxi-mumFree
PassageDiam.*Inches
OrificeDiam.Nom.Inches 7
psi20psi
80psi
Length HexNozzleMin. Max. Max. WeightType
QJ + QH -SQ 121⁄32) 115⁄16) 1) 31⁄2 oz.QJJ + QH -SQ 13⁄4) 127⁄32)QJL+ QLH -SQ 23⁄32) 27⁄32) 5 oz.QJJL+QLH-SQ 27⁄32) 21⁄4) 11⁄8) 41⁄2 oz.
QUICK SPRAY NOZZLE TIPSNARROW ANGLE (15° AND 30° SERIES)
A12
QU
ICK
JE
T S
YS
TE
MFU
LL C
ON
E
13°13°13°13°13°
15°15°15°15°15°
15°15°15°15°15°
NozzleInlet
Conn.NPT orBSPT
QUICKFULLJETTIP TYPE
QG QLG
CapacitySize
SPRAYANGLE
17°17°26°23°23°25°
30°30°30°30°30°30°
31°32°32°30°30°30°
NozzleInlet
Conn.NPT orBSPT
QUICKFULLJETTIP TYPE
QG QLG
CapacitySize
SPRAYANGLE
Pipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT orBSPT QJ QJL QJJ QJJL
1⁄8 ⓦ ⓦ1⁄4 ⓦ ⓦ3⁄8 ⓦ ⓦ ⓦ ⓦ1⁄2 ⓦ ⓦ ⓦ ⓦ
QG15Quick FullJet
spray nozzle tip
QG30Quick FullJet
spray nozzle tip
QLG30Quick FullJet
spray nozzle tip(large connection)
QLG15Quick FullJet
spray nozzle tip(large connection)
QG-15, QG-30, QLG-15 and QLG-30 series Quick FullJetspray tip assemblies featureremovable caps and vanes. Inaddition, when combined with a QuickJet nozzle body, thesetips allow quick-connect 1Ú4turn installation without the use of tools.
ⓦ Cleaning and washing of products requiring deep penetration and/or sprayinduced turbulence to ensurethorough washing
ⓦ Desuperheating of steam
ⓦ Spraying the inside of ductsand pipe for cooling or cleaning
DIMENSIONS & WEIGHTS
PERFORMANCE DATA
DESIGN FEATURES COMMON APPLICATIONS
ORDERING INFORMATIONQUICKJET
COMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + QG15 - SS 1550
TipType
MaterialCode
CapacitySize
QJ AND QJLFEMALE BODIES
QJJ AND QJJLMALE BODIES
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
Q QQ Q
Q QQ Q
Length HexNozzleMin. Max. Max. WeightType
QJ + QG 23⁄32) 23⁄4) 1) 5 oz.QJJ + QG 21⁄4) 221⁄32) 7⁄8) 41⁄2 oz.QJL + QLG 231⁄32) 35⁄16)QJJL + QLG 33⁄32) 33⁄8)
11⁄8) 9 oz.
CAPACITY(gallons per minute)
10psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
200psi
300psi
.35
.701.52.54.5
.50
.992.13.56.4
.611.22.64.37.8
.701.43.05.09.0
.861.73.76.1
11.0
.992.04.27.1
12.7
1.12.24.77.9
14.2
1.42.75.89.7
17.4
1.63.16.7
11.220
1.93.88.2
13.725
ⓦ 1507 1⁄161⁄8, 1⁄4, 3⁄8, 1⁄2 ⓦ 1514 3⁄32
1⁄4, 3⁄8, 1⁄2 ⓦ 1530 1⁄83⁄8, 1⁄2 ⓦ 1550 11⁄64
1⁄2 ⓦ 1590 7⁄32
Material Material Codesno material code = Brass
SS = 303 Stainless Steel
OrificeDiam.Nom.Inches 10
psi40psi
100psi
CAPACITY(gallons per minute)
15psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
200psi
300psi
.09
.15
.25
.43
.55
.86
.10
.18
.28
.50
.64
.99
.12
.22
.35
.61
.781.2
.14
.25
.40
.70
.901.4
.17
.31
.49
.861.11.7
.20
.35
.57
.991.32.0
.22
.40
.631.11.42.2
.27
.48
.781.41.72.7
.31
.56
.901.62.03.1
.38
.681.11.92.53.8
ⓦ 3001.4 1⁄32ⓦ 3002.5 1⁄321⁄8, 1⁄4, 3⁄8, 1⁄2 ⓦ 3004 3⁄64ⓦ 3007 1⁄16
1⁄4, 3⁄8, 1⁄2 ⓦ 3009 5⁄64
3⁄8, 1⁄2 ⓦ 3014 3⁄32
Material Material Codesno material code = Brass
SS = 303 Stainless Steel
OrificeDiam.Nom.Inches 15
psi40psi
100psi
QUICK SPRAY NOZZLE TIPSWIDE ANGLE
A13
QU
ICK
JE
T S
YS
TE
MFU
LL C
ON
E
Pipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT orBSPT QJ QJL QJJ QJJL
1⁄8 ⓦ ⓦ1⁄4 ⓦ ⓦ3⁄8 ⓦ ⓦ1⁄2 ⓦ ⓦ ⓦ ⓦ
DIMENSIONS & WEIGHTS
PERFORMANCE DATA
ORDERING INFORMATION
DESIGN FEATURES
QG-WQuick FullJet
spray nozzle tip(standard connection)
QLG-WQuick FullJet
spray nozzle tip(large connection)
QG-W and QLG-W series QuickFullJet spray tip assemblies fea-ture removable caps and vanes.In addition, when combined with a QuickJet nozzle body,these tips allow quick-connect 1⁄4 turn installation without theuse of tools.
These wide angle spray tips feature a solid cone-shapedspray pattern with a roundimpact area and spray angles of102° to 120°. A unique vanedesign and exacting internal proportions were engineered toassure accurate and consistentperformance.
QUICKJETCOMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + QG - SS 14W
TipType
MaterialCode
CapacitySize
112°114°114°114°114°114°114°114°114°114°114°114°
120°120°120°120°120°120°120°120°120°120°120°120°120°120°120°120°
102°102°102°103°103°103°103°103°104°104°106°108°108°108°110°112°
NozzleInlet
Conn.NPT orBSPT
QUICKFULLJETTIP TYPE
QG QLG
CapacitySize
SPRAYANGLE
*Foreign matter with maximum diameter as listed can pass through nozzle without clogging.
QJ AND QJLFEMALE BODIES
QJJ AND QJJLMALE BODIES
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
Q QQ Q
CAPACITY(gallons per minute)
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
80psi
.74
.891.01.31.51.82.02.22.63.03.33.7
.48
.68
.861.01.21.51.72.12.32.63.03.43.94.3
.28
.43
.56
.801.01.21.41.72.02.42.73.03.54.04.55.0
.33
.51
.67
.961.21.41.72.02.42.93.23.64.24.85.46.0
.38
.58
.761.11.41.61.92.32.73.33.74.14.85.46.16.8
.45
.70
.911.31.61.92.32.83.23.94.44.95.76.57.38.1
.51
.791.01.51.82.22.63.13.74.45.05.56.47.48.39.2
.61
.951.21.82.22.63.13.74.45.35.96.67.78.89.9
11.0
.701.11.42.02.53.03.54.25.06.06.77.58.7
10.011.212.5
ⓦ 2.8W 1⁄16 .040ⓦ 4.3W 5⁄64 .0401⁄8, 1⁄4, 3⁄8, 1⁄2 ⓦ 5.6W 3⁄32 .040ⓦ 8W 3⁄32 .050ⓦ 10W 7⁄64 .050
1⁄4, 3⁄8, 1⁄2 ⓦ 12W 1⁄8 .050ⓦ 14W 9⁄64 1⁄16
ⓦ 17W 5⁄32 1⁄16
3⁄8, 1⁄2 ⓦ 20W 11⁄64 3⁄32ⓦ 24W 3⁄16 3⁄32ⓦ 27W 13⁄64 7⁄64
ⓦ 30W 7⁄32 7⁄64ⓦ 35W 15⁄64 1⁄81⁄2 ⓦ 40W 1⁄4 1⁄8ⓦ 45W 1⁄4 9⁄64ⓦ 50W 17⁄64 5⁄32
Material Material Codesno material code = Brass
SS = 303 Stainless Steel
Maxi-mumFree
PassageDiam.*Inches
OrificeDiam.Nom.Inches 5
psi10psi
80psi
Length HexNozzleMin. Max. Max. WeightType
QJ + QG-W 23⁄16) 211⁄16) 1) 51⁄2 oz.QJJ + QG-W 25⁄16) 25⁄8) 7⁄8) 41⁄2 oz.QJL + QLG-W 31⁄32) 35⁄32)QJJL + QLG-W 35⁄32) 33⁄16)
11⁄8) 81⁄2 oz.
3/8 QPPNOZZLE BODY
1/4 QPPNOZZLE BODY
1/8 QPPNOZZLE BODY
Internal VITONO-ring
Optional externalO-ring
SPRAY TIP(See Chart)
A14
QU
ICK
JE
T S
YS
TE
MFU
LL C
ON
E
QPH, QPH-W
QUICK SPRAY NOZZLES
ProMax® spray nozzle system
Spraying Systems’ ProMaxQuick FullJet nozzles are moldedof a glass-reinforced, engineeringgrade of polypropylene thatcombines exceptional durabilitywith chemical resistance. Thesimple, three-piece assemblyfeatures a unique locking designthat makes tip changing quickand easy. When installed the tipautomatically locks into place.Tips are color-coded by flow ratefor easy identification.
Spray tip changeout is accom-plished in seconds. A simple 90° turn of the tip removes orinstalls it. This is done by hand,without tools.
ProMax material is resistant tocaking and build-up. An optionalexternal O-ring is available foradditional protection againstcontaminants that might maketip removal difficult in harshenvironments.
The tip and body assemblies aredesigned with a built-in stop thatassures full engagement of thefull cone spray tip when installed.This eliminates time consumingmanual adjustment.
ProMax Quick FullJet spray tipsare available in capacities rang-ing from 0.67 to 2.9 gpm at 40psi (2.6 to 11.2 l/min at 3.0 bar).
The gray nozzle bodies areavailable with NPT or BSPTmale threads in 1⁄8), 1⁄4) and 3⁄8)sizes. An internal VITON O-ringprovides a positive seal betweenbody and tip.
Each tip produces a uniform andconsistent full cone spray patternfor accurate coverage across theheader.
White.51 gpm
(2.3 l/min)
Black.79 gpm
(3.5 l/min)
Orange.67 gpm
(3.0 l/min)
Blue1.9 gpm
(8.5 l/min)
Green.95 gpm
(4.2 l/min)
Red2.9 gpm
(12.7 l/min)
Yellow1.3 gpm
(5.5 l/min)
Wide AngleSpray Tips Standard Spray Tips
ProMax Quick FullJet full cone spray tips
DESIGN FEATURES
COMMON APPLICATIONSⓦ Parts washing/rinsing
ⓦ Chemical manufacturing
ⓦ Metal finishing
ⓦ Food processing
ⓦ Cooling
ⓦ Coating
ProMax QuickJet nozzle maximum pressuresat various temperatures
A15
QU
ICK
JE
T S
YS
TE
M
ⓦ Quick connect design makestip changing fast. No toolsrequired.
ⓦ Spray tips are color-coded forcapacity. Nozzle bodies arelight gray.
ⓦ Internal stop for positive align-ment of tip.
ⓦ Standard internal VITON O-ring.
ⓦ Optional external O-ringsuggested for applicationswhere nozzle becomes coatedwith spray material – for easiertip removal.
ⓦ Reinforced polypropyleneconstruction for strength andchemical resistance.
ⓦ Nozzle body threads areavailable in 1/8", 1/4", or 3/8"
sizes…NPT or BSPT.
FULL
CO
NE
QUICK SPRAY NOZZLES
ProMax® spray nozzle system (CONT.)
COMPLETE QUICKJETProMax NOZZLE
BODY/SEALSPRAY
1/4 QPP-VI + TIP
PipeSize
BodyType
SealMaterial
Code
LIQUID TEMPERATURE
PR
ES
SU
RE
40 60 80 100 120 140 160 180 200 (°F)4 16 27 38 49 60 71 82 93 (°C)
bar psi
10 150
7 100
3.5 50
0 0
A simple 90° hand turn of thespray tip quickly installs orremoves the spray tip from the body.
Inlet Connection1/8" 1/4" 3/8"
Spray TipColor
Spray TipNumber
White
Black
QPH-2.8W
QPH-4.3W••
••
••
NozzleType Weight
DESIGN FEATURES
ORDERING INFORMATION
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
Inlet Connection1/8" 1/4" 3/8"
Spray TipColor
Spray TipNumber
Orange
Green
Yellow
Blue
Red
QPH-3.5
QPH-5
QPH-6.5
QPH-10
QPH-15
••
•••••
•••••
OPERATINGREGION
Max.Length
Max.Hex.
ProMax Quick FullJet Spray Nozzle Performance – Wide Angle (120° at 10 psi)
CAPACITY (gallons per minute)
10 psi 15 psi 20 psi 30 psi 40 psi 60 psi 80 psi
.28
.43
.33
.51
.38
.58
.45
.70
.51
.79
.61
.95
.70
1.1
1⁄8QPP-VI + QPH 13⁄4) 7⁄8) .3 oz.
1⁄4QPP-VI + QPH 13⁄4) 7⁄8) .3 oz.
3⁄8QPP-VI + QPH 13⁄4) 7⁄8) .4 oz.
1⁄8QPP-VI + QPH-W 13⁄4) 7⁄8) .3 oz.
1⁄4QPP-VI + QPH-W 13⁄4) 7⁄8) .3 oz.
3⁄8QPP-VI + QPH-W 13⁄4) 7⁄8) .4 oz.
ProMax Quick FullJet Spray Nozzle Performance – Standard Angle (50°-85° at 20 psi)
CAPACITY (gallons per minute)
5 psi 7 psi 10 psi 20 psi 30 psi 40 psi 60 psi 80 psi 100 psi 150 psi
.25
.36
.47
.73
1.1
.30
.42
.55
.85
1.3
.35
.50
.65
1.0
1.5
.48
.69
.89
1.4
2.1
.58
.82
1.1
1.7
2.5
.67
.95
1.3
1.9
2.9
.81
1.2
1.5
2.4
3.5
.92
1.3
1.7
2.7
4.0
1.0
1.5
1.9
3.0
4.4
1.3
1.8
2.3
3.6
5.3
QUICK SPRAY NOZZLE (IN KYNAR®)SIZED FOR STRIPPERS, ETCHERS & DEVELOPERS
A16
QU
ICK
JE
T S
YS
TE
MFU
LL C
ON
E
QQMALE BODY
SEALEPDM (standard)VITON (optional)
SPRAY TIP(See Chart)
STANDARD BODY TYPEPipe InletConn. NPT (M)
or BSPT QQ1⁄8 ⓦ1⁄4 ⓦ3⁄8 ⓦ
H-KY Quick FullJet spray tipsare made of KYNAR PVDFthermoplastic to provide theexcellent chemical and heatresistance required in PCBproduction…performing atpressures up to 75 psi (5 bar) attemperatures up to 160° F (71°C).
Maximum pressures up to 125 psi (9 bar) may be attainedat lower temperatures. A quarterturn is all it takes to remove aworn tip for fast cleaning orreplacement.
PERFORMANCE DATA
DESIGN FEATURES
ORDERING INFORMATIONDIMENSIONS & WEIGHTS
H-KYQuick FullJet
spray tip
NozzleInlet
Conn.NPT or
BSPT (M)
QuickJetNozzle
Body Type& Material
QuickFullJet Tip& Capacity
Size
SPRAYANGLE
Material Code: KY = KYNAR
COMPLETE QUICKJETKYNAR NOZZLE
BODY/SEAL
1/4 QQ - KY +BodyType
MaterialCode
SeeChart
InletConnection
PipeSize
SPRAYTIP
CAPACITY(gallons per minute)
10psi
20psi
30psi
40psi
60psi
80psi
100psi
.60
.801.0
.83
1.11.4
.99
1.31.7
1.1
1.51.9
1.4
1.82.4
1.6
2.12.7
1.7
2.33.0
1⁄8, 1⁄4, 3⁄8 QQ-KY H-KY6 5⁄64
1⁄4, 3⁄8 QQ-KYH-KY8 3⁄32
H-KY10 7⁄64
OrificeDiam.
(Inches) 7psi
20psi
80psi
67°
61°75°
75°
70°78°
63°
64°75°
Nozzle Max. Max. WeightType Length Hex kg
1/8QQ-KY+H-KY 13⁄4) 7⁄8) .47 oz.
1/4QQ-KY+H-KY 13⁄4) 7⁄8) .5 oz.
3/8QQ-KY+H-KY 13⁄4) 7⁄8) .54 oz.
Nozzle Max. Max.Type Length Hex Weight
A17
QU
ICK
JE
T S
YS
TE
MFL
AT S
PR
AY
QUICK SPRAY NOZZLES (IN KYNAR®)SIZED FOR STRIPPERS, ETCHERS & DEVELOPERS
STANDARD BODY TYPEPipe InletConn. NPT (M)
or BSPT QJJS1⁄8 ⓦ1⁄4 ⓦ
QSU-KY and QSVV-KY QuickVeeJet miniature flat spray tipsare made of KYNAR PVDF ther-moplastic to provide the excellentchemical and heat resistancerequired in PCB production.These miniature spray tips areespecially well-suited for
strippers and other applicationswhere space is severely limited.For that reason QuickJet minia-ture spray nozzles measure underone inch when fully assembledand installed in the spray bar…plus the convenience ofautomatic spray tip alignment.
99°71°72°72°73°74°74°90°
110°80°80°80°80°80°80°95°
120°86°85°84°84°83°83°
100°
NozzleInlet
Conn.NPT or
BPST (M)
QuickJetNozzle
Body Type& Material
Quick VeeJet Tip Type
& CapacitySize
SPRAYANGLE
Material Code: KY = KYNAR
QSU-KYQuick VeeJet
miniature spray tips
QSVV-KYQuick VeeJet
miniature spray tips
COMPLETE QUICKJETKYNAR NOZZLE
BODY/SEAL
1/4 QJJS - KY +BodyType
MaterialCode
SeeChart
InletConnection
PipeSize
SPRAYTIP
PERFORMANCE DATA
DESIGN FEATURES
ORDERING INFORMATIONDIMENSIONS & WEIGHTS
QJJSMALE BODY
SEALEPDM (standard)VITON (optional)
SPRAY TIP(See Chart)
1/8QJJS-KY+QS--KY-- 13⁄32) 1⁄2) .5 oz.
1/4QJJS-KY+QS--KY-- 15⁄32) 9⁄16) .5 oz.
CAPACITY(gallons per minute)
10psi
20psi
30psi
40psi
60psi
80psi
100psi
.15
.20
.30
.40
.50
.751.01.0
.21
.28
.42
.56
.711.11.41.4
.26
.35
.52
.69
.861.31.71.7
.30
.40
.60
.801.01.52.02.0
.37
.49
.73
.981.21.82.52.5
.42
.57
.851.11.42.12.82.8
.47
.63
.951.31.62.43.23.2
QSVV-KY11003 .043QSVV-KY8004 .052QSVV-KY8006 .062QSVV-KY8008 .0721⁄8, 1⁄4 QJJS-KYQSU-KY8010 5⁄64
QSU-KY8015 3⁄32
QSU-KY8020 7⁄64
QSU-KY9520 7⁄64
OrificeDiam.
(Inches) 20psi
40psi
80psi
A18
QU
ICK
JE
T S
YS
TE
MFL
AT S
PR
AY/S
OLI
D S
TREA
MQUICK SPRAY NOZZLE TIPS
Quick VeeJet flat spray tips offerthe advantages of standardVeeJet nozzles and save timewith quick-connect 1⁄4 turninstallation and automatic spray pattern alignment.
QVV series Quick VeeJet tipsoffer flow rates below 1 gpm at40 psi (3.9 l/min at 3 bar).
QU and QLU series tips provideflow rates of 1 gpm (3.9 l/min) orgreater at 40 psi (3 bar).
QSVV and QSU series QuickVeeJet tips combine high impactflat spray patterns with small tipsize. QSVV tips offer flow ratesbelow 1 gpm at 40 psi (3.9 l/minat 3 bar), while QSU tips provideflow rates of 1 gpm (3.9 l/min) orgreater at 40 psi (3 bar). Theyare ideal for applications wheresmaller physical size and weightare important.
All QuickJet flat spray tips fitstandard QuickJet nozzle bodies.
QSVVsmall capacity
miniature spray tip
QSUmedium capacity
miniature spray tip
QVVsmall capacity
spray tip
QUmedium capacity
spray tip
QLUlarge capacity
spray tip
TYPICALASSEMBLY
FOR MINIATUREQUICK VEEJET
SPRAY NOZZLES
QJJSMALE BODY
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
TYPICALSPRAY NOZZLEASSEMBLY FORQVV, QU & QLU
SPRAY TIPS
QJ AND QJLFEMALE BODIES
QJJ AND QJJLMALE BODIES
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
ⓦ Metal cleaning and processing
ⓦ Spray coating
ⓦ Degreasing and rinsing
ⓦ Parts washers
ⓦ Spray cooling
ⓦ Pressure cleaning
ⓦ Sand, coal and gravel washing
Pipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT orBSPT QJ QJL QJJS QJJ QJJL
1⁄8 ⓦ ⓦ ⓦ1⁄4 ⓦ ⓦ ⓦ3⁄8 ⓦ ⓦ ⓦ ⓦ1⁄2 ⓦ ⓦ ⓦ ⓦ
DESIGN FEATURES
ORDERING INFORMATION
COMMON APPLICATIONS
DIMENSIONS & WEIGHTS
QUICKJETCOMPLETE NOZZLE
SPRAY TIP
+ QVV - SS - 11010Tip Type Material
CodeCapacity
Size
NOZZLEBODY
SOLID STREAM
QU, QLUNozzle Length Hex. WeightType Min. Max. Max.
QJ + QU 119⁄32) 2) 23⁄4 oz.
QJJ + QU 123⁄32) 129⁄32)1)
21⁄4 oz.
QJL + QLU 131⁄32) 25⁄16) 43⁄4 oz.
QJJL + QLU 23⁄32) 211⁄32)11/8)
41⁄4 oz.
QSVV, QSUNozzle Length Hex. WeightType Min. Max. Max.
QJJS + QSVV 13⁄64) 13⁄32)
QJJS + QSU 17⁄64) 111⁄64)9⁄16) 1 oz.
QVVNozzle Length Hex. WeightType Min. Max. Max.
QJ + QVV 13⁄4) 25⁄32) 21⁄2 oz.
QJJ + QVV 17⁄8) 21⁄16)1)
2 oz.
A19
QU
ICK
JE
T S
YS
TE
MFL
AT S
PR
AY
94°97°98°99°
100°100°101°102°103°104°105°81°82°82°83°84°84°86°87°89°90°90°91°92°93°93°93°93°93°61°67°68°68°69°70°71°71°72°72°73°74°74°74°74°74°75°75°75°73°74°50°53°53°54°55°56°58°59°60°63°64°65°44°45°47°48°50°51°51°52°53°53°53°54°55°
110°110°110°110°110°110°110°110°110°110°110°95°95°95°95°95°95°95°95°95°95°95°95°95°95°95°95°95°95°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°73°73°73°73°73°73°73°73°73°73°73°73°65°65°65°65°65°65°65°65°65°65°65°65°65°
121°121°120°120°119°118°117°117°117°117°117°105°105°105°104°103°102°101°100°100°100°100°101°100°99°99°99°99°99°95°94°89°89°88°87°86°86°85°84°84°83°83°83°83°83°83°83°83°84°82°89°87°86°85°84°83°82°81°80°79°77°77°77°77°76°75°75°74°74°73°72°72°72°72°71°
124°124°123°123°122°122°122°121°119°118°118°113°113°113°111°108°107°106°105°105°105°105°105°105°103°103°103°102°102°101°99°92°92°91°90°89°89°88°87°87°86°86°86°86°85°85°86°86°86°85°97°93°92°90°88°87°86°85°84°83°82°80°86°84°83°82°81°80°80°79°78°76°76°75°74°
QUICKVEEJET
SPRAY TIPS
QSVV QVV QSU QU QLU
CapacitySize
SPRAYANGLE
QUICKSPRAY NOZZLE TIPS
PERFORMANCE DATA
MATCHING NOZZLE BODY SIZE WITH SPRAY TIP
CAPACITY SIZE
TO PROVIDE PROPER SPRAYPERFORMANCE, THE BODY
SIZE SHOULD BE LARGEENOUGH TO MATCH THE
SPRAY TIP CAPACITY. TABLES BELOW LIST THEMAXIMUM TIP CAPACITY
SIZE FOR EACH BODY SIZE.
QUICKJET MINIATURENOZZLE BODIES TO BE USEDWITH QSVV AND QSU SPRAY
NOZZLE TIPS.
MAXI-MUMTIP
CAPAC-ITY SIZE
PIPEINLETCONN.NPT ORBSPT
STANDARDBODY TYPE
(F) (M)
— QJJS
--08
--20
1⁄8
1⁄4
NA
NA
ⓦⓦ
QUICKJET LARGE NOZZLEBODIES TO BE USED WITHQLU SPRAY NOZZLE TIPS.
MAXI-MUMTIP
CAPAC-ITY SIZE
PIPEINLETCONN.NPT ORBSPT
STANDARDBODY TYPE
(F) (M)
QJL QJJL
--2503⁄8
1⁄2
ⓦⓦ
ⓦⓦ
QUICKJET REGULAR NOZZLEBODIES TO BE USED WITH
QVV AND QU SPRAY NOZZLE TIPS.
MAXI-MUMTIP
CAPAC-ITY SIZE
PIPEINLETCONN.NPT ORBSPT
STANDARDBODY TYPE
(F) (M)
QJ QJJ
--50
--80
1⁄8
1⁄4
3⁄8
1⁄2
ⓦⓦⓦⓦ
ⓦⓦⓦⓦ
NA = Not Available
CAPACITY(gallons per minute)
5psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
200psi
300psi
.03
.05
.07
.11
.14
.18
.21
.28
.35
.53
.71
.03
.05
.07
.11
.14
.18
.21
.28
.35
.53
.711.11.41.82.12.53.55.3
.07
.11
.14
.18
.21
.28
.35
.53
.711.11.41.82.12.53.55.37.1
.04
.05
.08
.11
.14
.16
.22
.27
.33
.07
.11
.14
.18
.21
.28
.05
.07
.10
.15
.20
.25
.30
.40
.50
.751.0.05.07.10.15.20.25.30.40.50.751.01.52.02.53.03.55.07.5
.03
.05
.07
.10
.15
.20
.25
.30
.40
.50
.751.01.52.02.53.03.55.07.5
10.0
.020
.039.06.08.12.15.19.23.31.38.46
.03
.05
.07
.10
.15
.20
.25
.30
.40
.07
.11
.14
.21
.28
.35
.42
.56
.711.11.4.07.11.14.21.28.35.42.56.711.11.42.12.83.54.24.97.1
10.6.035.05.07.11.14.21.28.35.42.56.711.11.42.12.83.54.24.97.1
10.614.1.016.028.055.08.11.16.22.27.33.44.54.65
.012
.018
.023
.035.05.07.11.14.21.28.35.42.56
.09
.13
.17
.26
.35
.43
.52
.69
.861.31.7.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.18.6
13.0.043.06.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.18.6
13.017.3.020.034.067.10.13.20.27.33.40.53.67.80
.015
.022
.029
.043.06.09.13.17.26.35.43.52.69
.10
.15
.20
.30
.40
.50
.60
.801.01.52.0.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.0
10.015.0.050.067.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.0
10.015.020.0.023.039.077.116.154.231.308.385.462.616.770.924.017.025.033.050.067.10.15.20.30.40.50.60.80
.12
.18
.25
.37
.49
.61
.73
.981.21.82.5.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.6
12.218.4.06.08.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.6
12.218.4
25.028.048.09.14.19.28.38.47.57.75.941.1
.021
.031
.040
.060.08.12.18.25.37.49.61.73.98
.14
.21
.28
.42
.57
.71
.851.11.42.12.8.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9
14.121.07.09.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9
14.12128
.032
.055.11.16.22.33.44.54.65.871.11.3
.024
.035
.047.07.09.14.21.28.42.57.71.851.1
.16
.24
.32
.47
.63
.79
.951.31.62.43.2.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.115.8
24.08.11.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.115.8
2432
.036
.062.12.18.24.37.49.61.73.981.21.5
.027
.040
.052.08.11.16.24.32.47.63.79.951.3
.22
.34
.45
.67
.891.11.31.82.23.44.5.22.34.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7
2234.11.15.22.34.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7
223444
.051
.087.17.26.34.52.69.861.01.41.72.1
.038.06.07.11.15.22.34.45.67.891.11.31.8
.27
.41
.55
.821.11.41.62.22.74.15.5.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2
2741.14.18.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2
274155
.063.11.21.32.42.63.841.11.31.72.12.5
.047.07.09.14.18.27.41.55.821.11.41.62.2
11001 ⓦ .026110015 ⓦ .03111002 ⓦ .03611003 ⓦ ⓦ .04311004 ⓦ .052
110° 11005 ⓦ .05711006 ⓦ .06211008 ⓦ .07211010 ⓦ 5⁄64
11015 ⓦ 3⁄32
11020 ⓦ 7⁄64
9501 ⓦ .02695015 ⓦ .0319502 ⓦ .0369503 ⓦ .0439504 ⓦ .0529505 ⓦ .0579506 ⓦ .0629508 ⓦ .0729510 ⓦ 5⁄64
95° 9515 ⓦ 3⁄32
9520 ⓦ ⓦ 7⁄64
9530 ⓦ 9⁄64
9540 ⓦ 5⁄32
9550 ⓦ 11⁄64
9560 ⓦ 3⁄16
9570 ⓦ 13⁄64
95100 ⓦ 1⁄495150 ⓦ 19⁄64
800050 ⓦ .018800067 ⓦ .0218001 ⓦ .02680015 ⓦ .0318002 ⓦ .0368003 ⓦ .0438004 ⓦ ⓦ .0528005 ⓦ .0578006 ⓦ ⓦ .062
80° 8008 ⓦ ⓦ .0728010 ⓦ ⓦ 5⁄64
8015 ⓦ ⓦ 3⁄32
8020 ⓦ ⓦ 7⁄64
8030 ⓦ 9⁄64
8040 ⓦ 5⁄32
8050 ⓦ 11⁄64
8060 ⓦ 3⁄16
8070 ⓦ 13⁄64
80100 ⓦ 1⁄480150 ⓦ 19⁄64
80200 ⓦ 11⁄32
730023 ⓦ .012730039 ⓦ .016730077 ⓦ .022730116 ⓦ .028730154 ⓦ .032730231 ⓦ .040
73° 730308 ⓦ .045730385 ⓦ .051730462 ⓦ .056730616 ⓦ .065730770 ⓦ .072730924 ⓦ .078650017 ⓦ .011650025 ⓦ .013650033 ⓦ .015650050 ⓦ .018650067 ⓦ .0216501 ⓦ .026
65° 65015 ⓦ .0316502 ⓦ .0366503 ⓦ .0436504 ⓦ .0526505 ⓦ .0576506 ⓦ .0626508 ⓦ .072
SprayAngle
at40 psi
Equiv.OrificeDiam.Inches 20
psi40psi
80psi
200psi
TYPICAL SPRAYNOZZLE ASSEMBLYFOR QVV, QU & QLU
SPRAY TIPS
QJ AND QJLFEMALE BODIES
QJJ AND QJJLMALE BODIES
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
A20
QU
ICK
JE
T S
YS
TE
MFL
AT S
PR
AYQUICKSPRAY NOZZLE TIPS
PERFORMANCE DATA
56°56°57°58°59°60°60°60°58°59°60°27°29°30°32°35°37°38°39°40°42°44°45°45°45°45°45°45°46°46°46°46°44°44°45°46°21°22°22°22°24°26°27°29°30°30°31°31°31°32°32°32°33°34°35°35°35°34°35°36°
14°15°15°15°16°16°17°
65°65°65°65°65°65°65°65°65°65°65°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°25°25°25°25°25°25°25°25°25°25°25°25°
71°70°70°69°68°68°68°68°69°68°67°65°64°62°60°60°59°58°57°56°56°56°56°55°55°55°55°55°54°54°54°54°52°53°52°52°54°53°53°53°53°52°52°51°50°50°49°49°47°45°45°45°45°45°45°45°45°43°43°42°35°35°34°34°34°34°34°33°33°32°32°31°
74°73°73°72°72°71°71°71°70°70°69°74°71°68°66°66°65°64°63°62°61°61°60°60°59°59°59°59°59°59°59°59°54°55°55°55°61°60°60°60°60°59°59°58°57°56°55°55°53°48°48°48°48°48°48°48°48°46°44°44°47°45°44°43°42°42°41°40°40°39°39°38°
QUICKVEEJET
SPRAY TIPS
QSVV QVV QSU QU QLU
CapacitySize
SPRAYANGLE
Material Material Codesno material code = Brass
SS = 303 Stainless Steel
TYPICAL ASSEMBLYFOR MINIATUREQUICK VEEJET
SPRAY NOZZLES
QJJSMALE BODY
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
Q QQ QQ QQ Q
CAPACITY(gallons per minute)
5psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
200psi
300psi
.35
.53
.711.11.41.82.12.53.55.37.1
.11
.14
.18
.21
.28
.35
.53
.711.11.41.82.12.53.54.25.37.1
.28
.35
.53
.711.11.41.82.12.53.55.37.1
.50
.751.01.52.02.53.03.55.07.5
10.0
.05
.07
.10
.15
.20
.25
.30
.40
.50
.751.01.52.02.53.03.55.06.07.5
10.0
.10
.15
.20
.25
.30
.40
.50
.751.01.52.02.53.03.55.07.5
10.0
.20
.25
.30
.711.11.42.12.83.54.24.97.1
10.614.1.012.018.023.035.05.07.11.14.21.28.35.42.56.711.11.42.12.83.54.24.97.18.5
10.614.1.012.018.023.035.05.07.11.14.21.28.35.42.56.711.11.42.12.83.54.24.97.1
10.614.1
.07
.11
.14
.21
.28
.35
.42
.861.31.72.63.54.35.26.18.6
13.017.3.015.022.029.043.06.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.18.6
10.413.017.3.015.022.029.043.06.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.18.6
13.017.3.015.022029.043.06.09.13.17.26.35.43.52
1.01.52.03.04.05.06.07.0
10.015.020.0.017.025.033.050.067.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.0
10.012.015.0
20.017.025.033.050.067.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.0
10.015.020.0.017.025.033.050.067.10.15.20.30.40.50.60
1.21.82.53.74.96.17.38.6
12.218.4
25.021.031.040.06.08.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.6
12.214.718.4
25.021.031.040.06.08.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.6
12.218.4
25.021.031.040.06.08.12.18.25.37.49.61.73
1.42.12.84.25.77.18.59.9
14.12128
.024
.035
.047.07.09.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9
14.117.0
2128
.024
.035
.047.07.09.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9
14.12128
.024
.035
.047.07.09.14.21.28.42.57.71.85
1.62.43.24.76.37.99.5
11.115.8
2432
.027
.040
.052.08.11.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.115.819.0
2432
.027
.040
.052.08.11.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.115.8
2432
.027
.040
.052.08.11.16.24.32.47.63.79.95
2.23.44.56.78.9
11.213.415.7
223444
.038.06.07.11.15.22.34.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7
22273444
.038.06.07.11.15.22.34.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7
223444
.038.06.07.11.15.22.34.45.67.891.11.3
2.74.15.58.2
11.013.716.419.2
274155
.047.07.09.14.18.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2
27334155
.047.07.09.14.18.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2
274155
.047.07.09.14.18.27.41.55.821.11.41.6
6510 ⓦ 5⁄64
6515 ⓦ 3⁄32
6520 ⓦ 7⁄64
6530 ⓦ 9⁄64
6540 ⓦ 5⁄32
65° 6550 ⓦ 11⁄64
6560 ⓦ 3⁄16
6570 ⓦ 13⁄64
65100 ⓦ 1⁄465150 ⓦ 19⁄64
65200 ⓦ 11⁄32
500017 ⓦ .011500025 ⓦ .013500033 ⓦ .015500050 ⓦ .018500067 ⓦ .0215001 ⓦ .02650015 ⓦ .0315002 ⓦ .0365003 ⓦ .0435004 ⓦ .052
50° 5005 ⓦ .0575006 ⓦ .0625008 ⓦ .0725010 ⓦ 5⁄64
5015 ⓦ 3⁄32
5020 ⓦ 7⁄64
5030 ⓦ 9⁄64
5040 ⓦ 5⁄32
5050 ⓦ 11⁄64
5060 ⓦ 3⁄16
5070 ⓦ 13⁄64
50100 ⓦ 1⁄450120 ⓦ 17⁄64
50150 ⓦ 19⁄64
50200 ⓦ 11⁄32
400017 ⓦ .011400025 ⓦ .013400033 ⓦ .015400050 ⓦ .018400067 ⓦ .0214001 ⓦ .02640015 ⓦ .0314002 ⓦ .0364003 ⓦ .0434004 ⓦ .0524005 ⓦ .0574006 ⓦ .062
40° 4008 ⓦ .0724010 ⓦ 5⁄64
4015 ⓦ 3⁄32
4020 ⓦ 7⁄64
4030 ⓦ 9⁄64
4040 ⓦ 5⁄32
4050 ⓦ 11⁄64
4060 ⓦ 3⁄16
4070 ⓦ 13⁄64
40100 ⓦ 1⁄440150 ⓦ 19⁄64
40200 ⓦ 11⁄32
250017 ⓦ .011250025 ⓦ .013250033 ⓦ .015250050 ⓦ .018250067 ⓦ .021
25° 2501 ⓦ .02625015 ⓦ .0312502 ⓦ .0362503 ⓦ .0432504 ⓦ .0522505 ⓦ .0572506 ⓦ .062
SprayAngle
at 40 psi
Equiv.Diam.Nom.Inches 20
psi40psi
80psi
200psi
A21
QU
ICK
JE
T S
YS
TE
MFL
AT S
PR
AY
QUICKSPRAY NOZZLE TIPS
17°18°18°19°20°21°21°22°22°23°24°24°
6°6°7°7°8°9°
10°10°10°
25°25°25°25°25°25°25°25°25°25°25°25°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°
31°31°31°31°30°29°29°29°29°28°28°26°30°28°27°26°25°24°23°22°22°21°21°21°20°19°19°19°
38°37°37°37°36°35°35°35°35°32°30°29°37°34°32°30°29°28°27°27°27°26°26°26°25°24°24°23°
0°SOLID STREAM
QUICKVEEJET
SPRAY TIPS
QSVV QVV QSU QU QLU
CapacitySize
SPRAYANGLE
Material Material Codesno material code = Brass
SS = 303 Stainless Steel
PERFORMANCE DATA
ORDERING INFORMATIONQUICKJET
COMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + QVV - SS 11010
TipType
MaterialCode
CapacitySize
TYPICAL SPRAYNOZZLE ASSEMBLYFOR QVV, QU & QLU
SPRAY TIPS
QJ AND QJLFEMALE BODIES
QJJ AND QJJLMALE BODIES
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
TYPICAL ASSEMBLYFOR MINIATUREQUICK VEEJET
SPRAY NOZZLES
QJJSMALE BODY
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
Q QQ QQ QQ Q
CAPACITY(gallons per minute)
5psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
200psi
300psi
1.11.41.82.12.53.55.37.1
.003
.004
.007
.007
.018
.024
.035.05.07.10.14.18.21.28.35.53.711.11.41.82.12.52.83.54.25.37.18.8
.40
.50
.751.01.52.02.53.03.55.07.5
10.0
.751.0
.005
.006
.009.01
.025
.033.05.07.10.15.20.25.30.40.50.751.01.52.02.53.03.54.05.06.07.5
10.012.5
.56
.711.11.42.12.83.54.24.97.1
10.614.1
.14
.21
.28
.35
.42
.56
.711.11.4
.006
.008
.013
.015
.035.05.07.11.14.21.28.35.42.56.711.11.42.12.83.54.24.95.67.18.5
10.614.117.7
.69
.861.31.72.63.54.35.26.18.6
13.017.3.015.022.029.043.06.09.13.17.26.35.43.52.69.861.31.7
.008.01
.016
.018
.043.06.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.16.98.6
10.413.017.3
22
.801.01.52.03.04.05.06.07.0
10.015.020.0.017.025.033.050.067.10.15.20.30.40.50.60.801.01.52.0
.009
.012
.019
.021
.050
.067.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.08.0
10.012.015.020.0
25
.981.21.82.53.74.96.17.38.6
12.218.4
25.021.031.040.06.08.12.18.25.37.49.61.73.981.21.82.5
.011
.015
.023
.026.06.08.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.69.8
12.214.718.4
2531
1.11.42.12.84.25.77.18.59.9
14.12128
.024
.035
.047.07.09.14.21.28.42.57.71.851.11.42.12.8
.013
.017
.027.03.07.09.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9
11.314.117.0
212835
1.31.62.43.24.76.37.99.5
11.115.8
2432
.027
.040
.052.08.11.16.24.32.47.63.79.951.31.62.43.2
.014
.019.03
.033.08.11.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.112.615.819.0
243240
1.82.23.44.56.78.9
11.213.415.7
223444
.038.06.07.11.15.22.34.45.67.891.11.31.82.23.44.5
.020
.027
.043
.047.11.15.22.34.45.67.891.11.31.82.23.44.56.79.0
11.213.415.717.9
2227344456
2.22.74.15.58.2
11.013.716.419.2
274155
.047.07.09.14.18.27.41.55.821.11.41.62.22.74.15.5
.025
.033
.052
.058.14.18.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2
222733415568
2508 ⓦ .0722510 ⓦ 5⁄64
2515 ⓦ 3⁄32
2520 ⓦ 7⁄64
2530 ⓦ 9⁄64
25° 2540 ⓦ 5⁄32
2550 ⓦ 11⁄64
2560 ⓦ 3⁄16
2570 ⓦ 13⁄64
25100 ⓦ 1⁄425150 ⓦ 19⁄64
25200 ⓦ 11⁄32
150017 ⓦ .011150025 ⓦ .013150033 ⓦ .015150050 ⓦ .018150067 ⓦ .0211501 ⓦ .02615015 ⓦ .031
15° 1502 ⓦ .0361503 ⓦ .0431504 ⓦ .0521505 ⓦ .0571506 ⓦ .0621508 ⓦ .0721510 ⓦ 5⁄64
1515 ⓦ 3⁄32
1520 ⓦ 7⁄64
000009 ⓦ .008000012 ⓦ .010000019 ⓦ .012000021 ⓦ .0135000050 ⓦ .020000067 ⓦ .0230001 ⓦ .02800015 ⓦ .0330002 ⓦ .0390003 ⓦ ⓦ .0470004 ⓦ ⓦ .0550005 ⓦ .0610006 ⓦ ⓦ .067
0° 0008 ⓦ ⓦ .0780010 ⓦ .0860015 ⓦ .1070020 ⓦ .1250030 ⓦ 9⁄64
0040 ⓦ 5⁄32
0050 ⓦ 11⁄64
0060 ⓦ 3⁄16
0070 ⓦ 13⁄64
0080 ⓦ 13⁄64
00100 ⓦ 15⁄64
00120 ⓦ 1⁄400150 ⓦ 19⁄64
00200 ⓦ 21⁄64
00250 ⓦ 3⁄8
SprayAngle
at40 psi
Equiv.OrificeDiam.Inches 20
psi40psi
80psi
200psi
A22
QU
ICK
JE
T S
YS
TE
MFL
AT S
PR
AYQUICK SPRAY NOZZLES
ProMax® spray nozzle system
QPT
ProMax Quick VeeJet flat spraynozzles are molded of achemically-coupled, glass-reinforced, engineering grade ofpolypropylene that combinesexceptional durability withchemical resistance. The simple,three-part assembly features aunique locking design thatmakes tip changing quick andeffortless. When being installed,the spray tip is automaticallylocked into correct alignment.The tips are color-coded by flowrate for easy identification.
Spray tip changeout can beaccomplished in seconds. Yousimply turn the tip 90° to removeor install it. Tip installation andremoval is done by hand, withouttools. The tip is contoured for easygripping. The ProMax nozzlematerial is resistant to caking andbuild-up. An optional external O-ring is available for additionalprotection against contaminantsthat might make tip changeoutdifficult in a harsh environment.
Accurate alignment
The tip and body assemblies are designed with a built-in stopto assure correct alignment ofthe flat spray each time it’sinstalled. Eliminates timeconsuming manual alignment.
Eight capacities
ProMax Quick VeeJet spray tipsare available in eight capacitiesfrom 1 to 7 gpm at 40 psi (3.8 to26 l/min at 2.8 bar). Each capac-ity size is available in any of sixspray angles, 25°, 40°, 50°, 65°,80°, and 95°.
The gray nozzle bodies areavailable with NPT or BSPT malethreads in 1⁄8), 1⁄4), and 3⁄8) sizes.A standard internal VITON O-ring provides a positive sealbetween body and tip.
Engineered for performance
The ProMax QuickJet spraynozzle system is the product ofseveral years quick connectexperience.
Spray tip changeout is quick andeffortless even in harsh environ-ments where chemical buildupcan be a problem.
Each tip produces a uniform and consistent tapered edge flat spray pattern for accuratecoverage across the header with overlapping sprays.
White1.0 gpm
(3.8 l/min)
Green4.0 gpm
(15.2 l/min)
Gray1.5 gpm
(5.7 l/min)
Yellow5.0 gpm
(18.9 l/min)
Black2.0 gpm
(7.6 l/min)
Blue6.0 gpm
(22.7 l/min)
Orange3.0 gpm
(11.4 l/min)
Red7.0 gpm
(26.5 l/min)
ProMax Quick VeeJet flat spray tips
DESIGN FEATURES
COMMON APPLICATIONSⓦ Parts washing/rinsing
ⓦ Chemical manufacturing
ⓦ Metal finishing
ⓦ Food processing
ⓦ Cooling
ⓦ Coating
3/8 QPPNOZZLE BODY
1/4 QPPNOZZLE BODY
1/8 QPPNOZZLE BODY
Internal VITONO-ring
Optional externalO-ring
SPRAY TIP(See Chart)
A23
QU
ICK
JE
T S
YS
TE
MFL
AT S
PR
AY
QPT2510*
QPT2515*
QPT2520*
QPT2530
QPT2540
QPT2550**
QPT2560**
QPT2570**
QPT4010
QPT4015
QPT4020
QPT4030
QPT4040
QPT4050**
QPT4060**
QPT4070**
QPT5010
QPT5015
QPT5020
QPT5030
QPT5040
QPT5050**
QPT5060**
QPT5070**
QPT6510
QPT6515
QPT6520
QPT6530
QPT6540
QPT6550**
QPT6560**
QPT6570**
QPT8010
QPT8015
QPT8020
QPT8030
QPT8040
QPT8050**
QPT8060**
QPT8070**
QPT9510
QPT9515
QPT9520
QPT9530
QPT9540
QPT9550**
QPT9560**
QPT9570**
ProMax Quick VeeJet Flat Spray TipsTip
Color25° 40° 50° 65° 80° 95°
White
Gray
Black
Orange
Green
Yellow
Blue
Red
ⓦ Quick connect design makestip changing fast. No toolsrequired.
ⓦ Spray tips are color-coded forcapacity. Nozzle bodies arelight gray.
ⓦ Internal stop for positive align-ment of tip.
ⓦ Standard internal VITON O-ring.
ⓦ Optional external O-ringsuggested for applicationswhere nozzle becomes coatedwith spray material – for easiertip removal.
ⓦ Spray angles of 25°, 40°, 50°,65°, 80° and 95°.
ⓦ Reinforced polypropyleneconstruction for strength andchemical resistance.
ⓦ Maximum pressures to 250psi at 40°F (17.2 bar at 4°C).
ⓦ Nozzle body threads areavailable in 1⁄8), 1⁄4), or 3⁄8)sizes…NPT or BSPT (M).
ⓦ Maximum temperatures to200°F at 100 psi (93°C at 7 bar).
NozzleType
ORDERING INFORMATION
FEATURES
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
A simple 90° hand turn of thespray tip quickly installs orremoves the spray tip from thebody. Installed tips are auto-matically aligned.
COMPLETE QUICKJETPROMAX NOZZLE
BODY/SEALSPRAY
1/4 QPP-VI + TIP
PipeSize
BodyType
SealMaterial
Code
* Not recommended below 0.5 bar.** For 1⁄4) and 3⁄8) bodies only.
QUICK SPRAY NOZZLES
ProMax® spray nozzle system (CONT.)
ProMax QuickJet nozzle maximum pressuresat various temperatures
LIQUID TEMPERATURE
PR
ES
SU
RE
17 250
14 200
10 150
7 100
3.5 50
0 0
bar psi
OPERATINGREGION
Spray Angle at 40 psiCAPACITY (gallons per minute)
5psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
200psi
.35
.53
.71
1.1
1.4
1.8
2.1
2.5
.50
.75
1.0
1.5
2.0
2.5
3.0
3.5
.71
1.1
1.4
2.1
2.8
3.5
4.2
4.9
.86
1.3
1.7
2.6
3.5
4.3
5.2
6.1
1.0
1.5
2.0
3.0
4.0
5.0
6.0
7.0
1.2
1.8
2.5
3.7
4.9
6.1
7.3
8.6
1.4
2.1
2.8
4.2
5.7
7.1
8.5
9.9
1.6
2.4
3.2
4.7
6.3
7.9
9.5
11.1
2.2
3.4
4.5
6.7
8.9
11.2
13.4
15.7
Max.Length
Max.Hex. Weight
1⁄8QPP-VI + QPT 13⁄4) 7⁄8) .31 oz.
1⁄4QPP-VI + QPT 13⁄4) 7⁄8) .33 oz.
3⁄8QPP-VI + QPT 13⁄4) 7⁄8) .35 oz.
40 60 80 100 120 140 160 180 200 (°F)4 16 27 38 49 60 71 82 93 (°C)
QUICK SPRAY NOZZLE TIPNARROW ANGLE (HIGH IMPACT)
A24
QU
ICK
JE
T S
YS
TE
MFL
AT S
PR
AY
ⓦ Washing crushed stone andgravel
ⓦ High impact washing
ⓦ Degreasing
ⓦ Fruit and vegetable washing
ⓦ Paper machine “deckle” spray
QUICKJETCOMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + QLP - SS 5060
TipType
MaterialCode
CapacitySize
QLPQuick FlatJet
spray tip
The QLP Quick FlatJet spraynozzle tips offer a one piecedesign with the convenience of a quick-connect 1⁄4 turn instal-lation and automatic sprayalignment without the use oftools. Large unobstructed flowpassages are machined to helpminimize any clogging.
These spray nozzle tips feature a very high impact flat spray pat-tern with narrow spray angles…plus producing a uniform spraydistribution of medium sizeddroplets. The spray pattern hasvery sharply defined edges.
42°38°29°26°
50°50°35°35°
53°59°39°40°
CapacitySize
NozzleInlet Conn.
NPT or BSPT
SPRAYANGLE
Material Material Codesno material code = Brass
SS = 303 Stainless Steel
COMMON APPLICATIONS ORDERING INFORMATION
PERFORMANCE DATA
DESIGN FEATURES
DIMENSIONS & WEIGHTS
STANDARD BODY TYPEPipe InletConn. NPT (F) (M)or BSPT QJL QJJL
3⁄8 ⓦ ⓦ1⁄2 ⓦ ⓦ
QJLFEMALE BODY
QJJLMALE BODY
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
5060 3⁄16
50125 17⁄643⁄8, 1⁄2
3560 11⁄64
3580 13⁄64
CAPACITY(gallons per minute)
15psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
3.77.63.74.9
4.28.84.25.7
5.210.85.26.9
6.012.56.08.0
7.315.37.39.8
8.517.78.5
11.3
9.519.79.5
12.6
11.624
11.615.5
OrificeDiam.Nom.Inches 15
psi40psi
100psi
Max. Max. Max.Nozzle Length Dim. Dim. WeightType A B C
QJL + QLP 43⁄16) 38° 11⁄4) 8.5 oz.
QJJL + QLP 43⁄16) 38° 11⁄4) 8.5 oz.
SPRAY ANGLE
QUICK SPRAY NOZZLE TIPSWIDE ANGLE (FOR LIQUID, AIR AND STEAM)
A25
QU
ICK
JE
T S
YS
TE
MFL
AT S
PR
AY
TYPICAL ASSEMBLYFOR QTK
SPRAY TIP
QJ FEMALE BODY
QJJ MALE BODY
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
MINIATUREQUICK FLOODJET
NOZZLE ASSEMBLY
QJJSMALE BODY
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
Pipe STANDARD BODY TYPEInlet
Conn. (F) (M)NPT orBSPT QJ QJJS QJJ
1⁄8 ⓦ ⓦ ⓦ1⁄4 ⓦ ⓦ ⓦ3⁄8 ⓦ ⓦ1⁄2 ⓦ ⓦ
PERFORMANCE DATA
DESIGN FEATURES
QTKQuick FloodJet
spray tip
QSTKQuick FloodJet
miniature spray tip
QTK Quick FloodJet spray tipsprovide a wide range of smalland medium capacity sizes.These spray tips feature a wideangle flat spray pattern withmedium impact…producinguniform spray distribution ofmedium sized droplets.
The QSTK series Mini-QuickFloodJet spray nozzle tips offer a variety of low capacity sizes,and feature a very small tip size,saving you valuable space in all confined applications.
NozzleInlet Conn.
NPT or BSPT
QUICKFLOODJETTIP TYPE
QTK QSTK
CapacitySize
SPRAYANGLE
LIQUID
AIR AND STEAMQuick
FloodJetTips
QTK
NozzleInlet Conn.
NPT or BSPT
Capac-ity
Size
73°83°98°86°97°
114°101°115°128°98°
106°110°100°111°115°120°
83°89°
106°109°108°113°122°112°123°128°119°133°139°113°120°122°110°126°130°134°
117°122°125°128°125°129°133°126°132°142°134°145°153°123°131°133°121°136°140°142°
CAPACITY(gallons per minute)
3psi
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
.27
.41
.55
.66
.82
.991.11.62.22.53.3
.18
.21
.28
.35
.53
.71
.851.11.31.42.12.83.24.2
.12
.17
.21
.25
.33
.42
.63
.841.01.31.51.72.53.33.85.0
.075.10.15.20.25.30.40.50.751.01.21.51.82.03.04.04.56.0
.03
.06
.09
.12
.18
.24
.31
.37
.49
.61
.921.21.51.82.22.43.74.95.57.3
.035.07.11.14.21.28.35.42.57.711.11.41.72.12.52.84.25.76.48.5
.04
.08
.13
.17
.26
.35
.43
.52
.69
.871.31.72.12.63.13.55.16.97.8
10.4
.05
.10
.15
.20
.30
.40
.50
.60
.801.01.52.02.43.03.64.06.08.09.0
12.0
.06
.12
.18
.24
.37
.49
.61
.73
.981.21.82.52.93.74.44.97.39.8
11.014.7
ⓦ .25 .016ⓦ ⓦ .50 .024ⓦ ⓦ .75 .028ⓦ ⓦ 1 .033ⓦ ⓦ 1.5 .041ⓦ ⓦ 2 .046ⓦ ⓦ 2.5 .052ⓦ ⓦ 3 .0571⁄8, 1⁄4, 3⁄8, 1⁄2 ⓦ ⓦ 4 .065ⓦ ⓦ 5 .073ⓦ 7.5 .091ⓦ 10 .104ⓦ 12 .116ⓦ 15 .129ⓦ 18 .141ⓦ 20 .148
ⓦ 30 .1803⁄8, 1⁄2 ⓦ 40 .209ⓦ 45 .221ⓦ 60 .256
Material Material Codesno material code = Brass
SS = 303 Stainless Steel
OrificeDiam.Nom.Inches 7
psi20psi
60psi
ⓦ .50 .024ⓦ .75 .028ⓦ 1 .033ⓦ 1.5 .041ⓦ 2 .046ⓦ 2.5 .0521⁄8, 1⁄4, 3⁄8, 1⁄2 ⓦ 3 .057ⓦ 4 .065ⓦ 5 .073ⓦ 7.5 .091ⓦ 10 .104ⓦ 15 .129ⓦ 20 .148
3⁄8, 1⁄2 ⓦ 30 .180
2)21⁄2)3)31⁄2)4)4)5)5)6)6)7)7)81⁄2)81⁄2)
5)51⁄2)6)61⁄2)71⁄2)71⁄2)8)9)101⁄2)101⁄2)11)12)141⁄2)151⁄2)
CAPACITY–for STEAM
(pounds per hour)
10psi
20psi
40psi
50psi
.35
.50
.761.21.52.12.53.14.26.48.7
14.317.725.5
.49
.701.11.72.12.93.64.55.98.9
12.220.225.035.7
.781.11.72.73.44.75.76.89.3
14.219.331.939.556.9
.921.32.03.24.05.66.78.6
11.016.822.937.746.767.2
CAPACITY–in scfm(standard cubic feet
per minute)
10psi
20psi
40psi
50psi
.16
.22
.34
.54
.68
.941.11.41.92.83.96.47.9
11.4
.22
.31
.48
.75
.951.31.62.02.64.05.59.0
11.216.0
.35
.50
.751.21.52.12.53.04.26.38.6
14.317.725.4
.41
.59
.891.41.82.53.03.84.97.5
10.216.820.930.0
OrificeDiam.Nom.Inches
COVERAGEat 6)
Distancefrom Nozzle10psi
50psi
QUICK SPRAY NOZZLE TIPSHIGH PRESSURE300 TO 3000* PSI (20 TO 207 BAR)
A26
QU
ICK
JE
T S
YS
TE
MFL
AT S
PR
AY
QJEGFEMALE BODY
QJJEGMALE BODY
SEALBuna-N (standard)VITON (optional)
SPRAY TIP(See Chart)
QEGQuick WashJetspray nozzle tip
Hardened stainless steel
QEG Quick WashJet spray nozzletips produce a uniform spraydistribution of medium-sized drop-lets. The orifices are precision-machined for accurate control of flow rates. All these spray tipsprovide you with the benefit of aquick-connect 1⁄4 turn installationand automatic spray alignment.
They also offer a safety lockfeature which prevents the spray tips from releasing at high pressures.
*For applications at higherpressures consult factory forrecommendations andperformance data.
STANDARD BODY TYPEPipe InletConn. NPT (F) (M)or BSPT QJEG QJJEG
1⁄8 ⓦ ⓦ1⁄4 ⓦ ⓦ
ⓦ High pressure wash applica-tions requiring periodic changesof spray performance
ⓦ Cleaning applications involvingoccasional clogging problems
ⓦ Pressure wash application with nozzles mounted in hard to reach places
SPRAY ANGLENozzleInlet
Conn.NPT orBSPT
**00° 15° 25° 40° 50° 65°
ⓦ 02ⓦ 03
ⓦ ⓦ ⓦ ⓦ ⓦ 04ⓦ ⓦ ⓦ ⓦ ⓦ 045ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 05ⓦ ⓦ ⓦ ⓦ 055ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 06ⓦ ⓦ ⓦ ⓦ 065
1⁄8, 1⁄4 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 07ⓦ ⓦ 075ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 08ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 09ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 10ⓦ ⓦ ⓦ ⓦ ⓦ 15ⓦ ⓦ ⓦ ⓦ ⓦ 20
CapacitySize
**00° = Solid Stream
PERFORMANCE DATA
DESIGN FEATURES
COMMON APPLICATIONS
ORDERING INFORMATIONQUICKJET
COMPLETE NOZZLE
NOZZLE BODY SPRAY TIP
1/4 QJEG + QEG - 15 04Inlet Conn.
SizeBodyType
TipType
SprayAngle
CapacitySize
NozzleType
DIMENSIONS & WEIGHTS
1.72.63.53.94.34.85.25.66.16.56.97.88.7
13.017.3
CAPACITY(gallons per minute)
300psi
400psi
500psi
600psi
700psi
800psi
1000psi
1500psi
2000psi
2500psi
.55
.821.11.21.41.51.61.81.92.12.22.52.74.15.5
.63
.951.31.41.61.71.92.12.22.42.52.93.24.76.3
.711.11.41.61.81.92.12.32.52.72.83.23.55.37.1
.771.21.61.71.92.12.32.52.72.93.13.53.95.87.7
.841.31.71.92.12.32.52.72.93.13.43.84.26.38.4
.891.41.82.02.22.52.72.93.13.43.64.04.56.78.9
1.01.52.02.32.52.83.03.33.53.84.04.55.07.5
10.0
1.21.82.52.83.13.43.74.04.34.64.95.56.19.2
12.3
1.42.12.83.23.53.94.24.64.95.35.76.47.1
10.614.1
1.62.43.23.64.04.34.75.15.55.96.37.17.9
11.915.8
3000psi
Hex Length Weight
1⁄8QJEG + QEG 9⁄16) 133⁄64) 1.3 oz.1⁄8QJJEG + QEG 9⁄16) 131⁄64) 1.2 oz.1⁄4QJEG + QEG 5⁄8) 133⁄64) 1.5 oz.1⁄4QJJEG + QEG 9⁄16) 131⁄64) 1.3 oz.
Spray nozzle system
he UniJet spray nozzle system offers over 400 interchangeable spray tip sizes in flat spray, hol-
low or full cone spray patterns…in a wide range ofcapacities, spray angles, and materials. Spray tipreplacement is quick and easy by simply unscrewingthe retainer cap, hand removing and installing the newspray tip. Cost savings, because there’s no need toreplace complete nozzles. The UniJet system offerschoices of different nozzle body types…including pipeconnections, hose barb connections, and split-eyeletbodies for attachment over tubing and pipe. Internalstrainers and check valves are also important optionstogether with material choices.
T
Bsection
B2
UN
IJE
T S
YS
TE
M
SPRAY NOZZLE SYSTEM
Éwith a large choice of interchangeable spray tips for fast easy selection of spray patterns and capacities to fit the job!
pageUniJet® SystemComponents ....................B2-B5
Quick UniJet®
System.............................B6, B7
Hollow ConeTX, T-W...................................B8D.....................................B9, B10
Full ConeTG.........................................B11TG-SQ ..................................B12TG-W ....................................B13TH-W ....................................B14D ...........................................B15
Flat Spray pageTP..................................B16-B19TK .........................................B20
High PressureEG.........................................B21TC.................................B22, B23
Fine SprayTN, TNSSTC ........................B2423825, HV ORIFICES, 11430,BLOW-OFF NOZZLES.........B2522624, 23945........................B26
NOZZLE BODIES STRAINERS, ETC. SPRAY TIPS PLATES OUTLET FITTINGS RETAINERS
INDEX TO UNIJETSPRAY TIPSUniJet spray tips are available in a wide variety of materials,capacities, and spray patterns.For specific information aboutspray tips, consult the appropriatespray pattern section.
Shut-Off Screen Type Nozzle Strainer
Hollow ConeSpray
Nylon HoseShank Outlet
TipRetainer
Wall MountingAdapter
Metal HoseShank Outlet
NPT or BSPT(M) Outlet
NPT or BSPT(F) Outlet
Reducing NPT or BSPT (F)
Outlet Adapter
Plug
MeteringOrifice
StandardFull Cone
SquareFull Cone
Wide SprayFull Cone
Flat FanType
FloodJet®Type
Blow-OffType
WashJet®Type
TungstenCarbide
Fine Spray
Fogger Spray
Slotted TypeNozzle Strainer
Cup TypeNozzle Strainer
Fused BronzeNozzle Strainer
Disc TypeNozzle Strainer
Combination StrainerCheck Valve
Check Valve
Jet Stabilizer
Channel Mount
Hose Shank
Split-Eyelet
Swivel
Threaded
DiaphragmCheck Valve
Industry’s most universal nozzle design
*Split EyeletBody Sub-AssemblyOrder No.
7421 series UniJet split eyeletnozzle bodies provide a fast andeconomical way of installingUniJet nozzles on pipe or tubing.Drill a (\‹¤" (7.2 mm) hole in thepipe and clamp the assembly inplace for a positive, leak-proofseal. This cuts costs by elimi-nating cutting, threading andbrazing operations. Connectorbodies are machined from solidbar stock in brass or stainlesssteel. The body inlet extendswell into the pipe to retard theentry of sediment and minimizeclogging. Split-eyelet connectorsfit on piping !\¤"-1". They are de-signed for use at pressures up to250 psi (17 bar) and provide flowrates up to 3 gpm (11.4 l/min).
B3
UN
IJE
T S
YS
TE
M
SHUT-OFF
STANDARD NOZZLE BODIES
SPLIT-EYELET BODIES
+
UNIJET®
NOZZLE ASSEMBLY
NozzleInlet
Conn.NPT orBSPT
Nozzle BodySub-AssemblyOrder Number
Female Male
7421-1/2T Brass 13⁄16),20-22 mm
7⁄8)1⁄2)
3⁄4)
1)
1),25-27 mm
11⁄16)
11⁄4),32-35 mm
13⁄8)
SS
Brass
SS
Brass
SS
7421-1/2T-SS
7421-3/4T
7421-1T
7421-3/4T-SS
7421-1T-SS
NozzleBodyMat.
To Clamp On
TubingO.D.
UniJet nozzles consist of anozzle body, a spray tip, and atip retainer. Additional compo-nents such as strainers, checkvalves, special adapters andmetering orifices can also beincluded in the assembly.
Nozzle BodiesStandard UniJet nozzle bodieshave pipe thread (male orfemale) inlet connections in !\°"to !\¤" sizes. All outlet connectionsare !!\⁄fl"-16 male thread to fitUniJet tip retainers and adapters.
The UniJet system also providesspecial nozzle bodies. Nozzlebodies with hose shanks, swivels,split-eyelet clamps, adjustablemounting clamps and diaphragmcheck valves are all available.
Spray TipsUniJet spray tips offer a wideselection of spray patterns,capacities, and materials. Flatspray, full cone, hollow cone andsolid stream patterns, as well asmetering orifices and atomizingtips are all available in the UniJetsystem. Capacities range from0.003 to 25 gpm (0.01 to 94 l/min).
Tip RetainersUniJet tip retainers fit all UniJetnozzle bodies. Tip retainers holdspray tips and other nozzle com-ponents firmly in place. Adapterswith !!\⁄fl"-16 inlet thread areavailable with NPT or BSPT out-lets, hose shank connections andwall mount connections for usein place of standard retainers.
UniJet nozzle bodies and tipretainers are available as stockitems in brass, aluminum, nylon,mild steel, 303 stainless steel,and 316 stainless steel. Inletconnections are !\°", !\›", #\°" or!\¤" NPT or BSPT (male orfemale). Outlet connections are!!\⁄fl"-16 male thread to fit UniJettip retainers and adapters.
Type 20900 UniJet ball valvesprovide on-off control for individ-ual nozzles. They feature a !\›"NPT or BSPT (male or female)inlet connection. Outlet connec-tions are !!\⁄fl"-16 male thread foruse with UniJet tip retainers andadapters.
They have brass body construc-tion with stainless steel ball andoperate at pressures up to 400psi (28 bar).
UNIJET SPRAY NOZZLE ASSEMBLIESORDERING INFORMATION
UNIJETSPRAY NOZZLE ASSEMBLY
NOZZLE BODY SPRAY TIPSUB-ASSEMBLY NUMBER
1/4 TT-SS + 8006-SS
UNIJETSPRAY NOZZLE ASSEMBLY
NOZZLE BODY SPRAY TIPSUB-ASSEMBLY NUMBER
7421-1/2T-SS + 8010-SS
+
+
Material
1/8T 1/8TT Brass1/8 Stainless1/8T-SS 1/8TT-SS Steel
1/4T 1/4TT Brass1/4T-NYB 1/4TT-NYB Nylon
1/4 1/4T-I 1/4TT-I Steel
1/4T-SS 1/4TT-SS StainlessSteel
3/8T 3/8TT Brass3/8 Stainless3/8T-SS 3/8TT-SS Steel
1/2T 1/2TT Brass1/2 Stainless1/2T-SS 1/2TT-SS Steel
PipeSize
*Also available in stainless steel.
Ball Valve No Connections
20900-1⁄4M x T1⁄4) NPT or BSPT (M)
x 11⁄16)-16 (M)
20900-1⁄4F x T1⁄4) NPT or BSPT (F)
x 11⁄16)-16 (M)
Swivel Order No. (Brass)1⁄8) NPTor BSPT (F) 1⁄4) NPTor BSPT(F)
5000-1⁄8T 5000-1⁄4T4202-2-1⁄8T 4202-2-1⁄4T7620B-T 7620-T7450B-2T 7450-2T
Double Hose Shank
Adjustable Mounting ClampAssembly Order No.
Type 8360 diaphragm checkvalve nozzle bodies feature anylon body with a stainless steelvalve seat. The outlet is in linewith the !\›" NPT or BSPT (M)inlet. Maximum capacity of thisunit is 2 gpm (7.6 l/min).
Type 8355 diaphragm checkvalve nozzle bodies feature anylon body and valve seat. Inletconnections are a choice of !\°"or !\›" NPT or BSPT (F) and areat a 90° angle to the UniJetthread outlet. Type 8355 nozzlebodies offer a maximum flowrate of 2.5 gpm (9.5 l/min).
Type 4664B nozzle bodies areavailable in brass or aluminumwith a stainless steel valve seat.They feature !\°" NPT or BSPT(F) inlet connection at a 90°angle to the UniJet thread outlet.Maximum flow rate for this unit is1.5 gpm (5.7 l/min).
Type 6135A diaphragm checkvalve nozzle bodies are construct-ed of brass throughout. Inletconnections are available in !\›"or #\°" NPT or BSPT (F) and areat a 90° angle to the UniJetthread outlet. Maximum capacityis 4 gpm (15 l/min).
UniJet swivel nozzle bodies allowexact positioning of spray nozzlesat any angle within the swivel arcrange. A locknut holds the swivelin place with no slipping.
UniJet swivel nozzle bodiesfeature single or double outletsand arc ranges of 280° or 360°.They are available with !\°" or !\›" NPT or BSPT (F) inletconnections.
Outlet connections are !!\⁄fl"-16male thread for use with UniJetnozzle components. Constructionis of brass or aluminum and theswivels operate at pressures upto 125 psi (9 bar).
B4
UN
IJE
T S
YS
TE
M
SPRAY NOZZLE BODIES
111 112 6471 6472
8360 4664B 8355 6135A 5000-T 4202-T 7620-T 7450-2T
Type 111 Type 112
*NozzleBody
Material
Brass
Brass
Brass
Brass
Brass
Brass
StainlessSteel
Hose Shank Body Assembly Order No.
Single Hose Shank
6471A-400TD 6472A-400TD 9.59191A-531TD 9192A-531TD 12.56471-SS-C400TD 6472-SS-C400TD 9.59191-SS-C531TD 9192-SS-C531TD 12.5
To fitHose I.D.
mmMaterial
To ClampOn
111-1⁄2-A-400TD 112-1⁄2-A-400TD 9.5
111-1⁄2-A-531TD 112-1⁄2-A-531TD 12.5
111-3⁄4-A-400TD 112-3⁄4-A-400TD 9.5
111-3⁄4-A-531TD 112-3⁄4-A-531TD 12.5
111-1-A-400TD 112-1-A-400TD 9.5
111-1-A-531TD 112-1-A-531TD 12.5
111-11⁄4-A-400TD 112-11⁄4-A-400TD 9.5
111-11⁄4-A-531TD 112-11⁄4-A-531TD 12.5
111SQ-1-A-400TD 112SQ-1-A-400TD 9.5
111SQ-1-A-531TD 112SQ-1-A-531TD 12.5
To FitHose I.D.
mm1⁄2) Pipe
20-22 mmO.D. Tubing
3⁄4) Pipe25-27 mm
O.D. Tubing1) Pipe
32-35 mmO.D. Tubing
11⁄4) Pipe39-43 mm
O.D. Tubing
25 mm Sq.Tubing
ADJ. MOUNTING CLAMP NOZZLE BODIES HOSE SHANK NOZZLE BODIES
Adjustable mounting clampnozzle bodies provide an easymethod for adjusting or changingthe position of UniJet nozzleassemblies which are clampedto pipe or tubing. To movenozzle assembly, simply loosenthe screw, adjust the nozzleposition and tighten the screw tolock in place. Write for DataSheet 11105-1.
Nozzle body inlets have hoseshank connections for !\¤" or #\°"(12.5 mm or 9.5 mm) I.D. hose.Outlet connections have a !\›"NPT or BSPT (F) internal threadand an !!\⁄fl"-16 external malethread for use with UniJet nozzlecomponents. Assemblies areavailable for !\¤" to 1!\›" (12.5 mmto 31.75 mm) piping and theyoperate at pressures up to 125psi (9 bar). Write for Data Sheet11106-1.* Also available in plastic.
DIAPHRAGM CHECK VALVE NOZZLE BODIES SWIVEL NOZZLE BODIES
Hose shank nozzle bodiesprovide a convenient method forinstalling spray nozzles on angleiron or walls. The two pieceassembly includes a nozzlebody with hose shank inlets anda locknut to hold the assemblyfirmly in place. Write for DataSheet 13603-1.
Hose shank nozzle bodies canbe mounted in !!\⁄fl" (17.5 mm)diameter holes on any flatsupport. Inlet hose shanks fit #\°"or !\¤" (9.5 mm or 12.5 mm) I.D.hose. Outlet connections are!!\⁄fl"-16 male thread for use withUniJet tip retainers and adapters.Hose shank nozzle bodies canbe used at pressures up to 125 psi (9 bar). Write for DataSheet 13604-1.
280° arc 280° arc 360° arc 360° arc
Strainer StrainerOrder No. Body Material5053*--SS Brass8079-PP-* Polypropylene6051-SS-* Stainless Steel
Strainer Available MeshOrder No. Material Sizes
4514*--10 Brass or 50Nylon
4514*--20 Brass, Aluminum 25or Nylon
4514*--32 Brass, Aluminum 16or Nylon
Tip RetainerOrder No. Material
1325 Brass1325-SS Stainless Steel
8027-NYB Nylon
B5
UN
IJE
T S
YS
TE
M
JET STABILIZER ADAPTERS
OUTLET FITTINGSOutlet fittings are used with 1325tip retainers to provide a differentoutlet connection.
PLATES
TIP RETAINERS
Type 5053 strainers feature a brass, stainless steel, orpolypropylene body with astainless steel screen. Meshscreen sizes of 24, 50, 100 or200 are available.
Type 4514 slotted strainers areavailable in brass, aluminum, ornylon. They are available in achoice of milled slot sizesequivalent to 16, 25, or 50 meshscreens.
Type 4193A strainers include a built-in check valve. 4193Astrainers are available withbrass, stainless steel,aluminum, or polypropylenebodies. Springs, balls, andscreens are stainless steel.Mesh sizes available: 24, 50,100, 200. Springs with openingpressures of 5 psi (.35 bar), 10 psi (.7 bar), 20 psi (1.4 bar),40 psi (2.8 bar). Write for DataSheet 4193A.
Type 4067 cup strainers arestainless steel throughout, andoffer mesh screen sizes of 50,100 or 200.
UniJet 11950 Jet Stabilizersincrease spray projectiondistance and spray impact on flatspray tips which are mounted ata 90¡ angle to the liquid supplyline. Available in brass, aluminumand stainless steel; all with astainless steel guide vane. Writefor Data Sheet 12098-1.
Type 4916 metering plates aremade of stainless steel. Theyare supplied in eighty-two orificediameter sizes ranging from .008)to .250) (.2 mm to 6.35 mm).They provide a liquid capacityrange at 30 psi (2 bar) of .0073gpm to 6.9 gpm (.03 I/min to 26I/min). Write for Data Sheets11739, 12417, and 23471-2.
Type 1325 tip retainers are usedto hold the nozzle assemblytogether. They are made ofbrass, stainless steel, steel ornylon. Inlet connections are11Ú16)-16 female thread. Type 4928 adapters have an
overall length of 1) (2.54 cm).They are made of brass,aluminum or stainless steel,with a 1Ú8) NPT or BSPT femaleoutlet connection.
Type 4865 wall mountingadapters are made of brass orstainless steel. They feature a 3Ú4) NPT or BSPT male externalthread which permits mountingthe nozzle assembly into a tankwall or other supporting member.Write for Data Sheet 4865.
Type 4676 adapters are made ofbrass or stainless steel. Theyfeature outlet connections of 1Ú8),1Ú4), 3Ú8), or 1Ú2) NPT or BSPTfemale thread. Write for DataSheet 10896.
Type 3942 plug plates are usedin place of spray tips to shut offliquid flow. They are made in achoice of brass or stainless steel.
Type 6406 adapters have anoverall length of 15Ú16) (2.38 cm).They are made of brass, mildsteel or aluminum, with a 1Ú8) NPTor BSPT male outlet connection.
Type 6250 adapters have anoverall length of 9Ú16) (1.43 cm).They are made of brass,stainless steel, or mild steel,with female 1Ú8) NPT or BSPToutlet connections.
Type 7630 disc strainers areconstructed entirely of stainlesssteel. Mesh screen sizes of 50,100 or 200 are available. Writefor Data Sheet 10168.
Type 9106 fused bronze filtersare equivalent to a 300 meshscreen. They provide effectivefiltering action of the liquid.
Type 11750 check valves aredesigned for use in largercapacity nozzles wherestrainers are not required. Thecheck ball opens at 5 psi (0.35bar) or 10 psi (.7 bar), andallows flows up to 1.5 gpm (5.7 I/min). Type 11750 checkvalves are available in brass,stainless steel, aluminum, orpolypropylene with a stainlesssteel ball and spring. Write forData Sheet 11750.
*mesh size
*Above numbers for brass. For nylon add“NY”. For aluminum add “AL”.
STRAINERS AND CHECK VALVES
CHECK VALVESTRAINER ORDER NUMBER
4193A-SS- 5 -50SSMaterial
CodeSpring
OpeningPressure
(psi)
ScreenMesh
5053 4067 11950 4865
4676
4916
9106
11750
4193A
4514
3942
6406
6250
1325
4928
7630
B6
UN
IJE
T S
YS
TE
M
SPRAY NOZZLE SYSTEM
Can be used with all interchangeable UniJet® spray nozzle tips.
QUICK UNIJET NOZZLE ASSEMBLIES
QUICK UNIJET ADAPTERS FOR RETROFITTING
With the patented Quick UniJetSystem, changing or cleaningplugged or worn spray tips andstrainers is fast and easy. Cap isremoved with one quarter turnwithout tools. Automatic self-
alignment of flat spray patterns.Color-coding of caps. Nozzlebodies molded in black nylon with caps made of nylon in choiceof 8 colors.
Hand twist toleft “CLICK” and cap is off.
Hand twist toright “CLICK” and cap is onready to spray.
QJ17560-NYB
Can be mounted to !\¤", #\›", or 1"pipe. Features ChemSaver® drip-free shut-off, requiring 10 psi (.7 bar) at nozzle to open checkvalve, EPDM diaphragm withoptional VITON available. Assemblyrequires #\°" (9.5mm) hole in pipe formounting. Maximum operatingpressure 300 psi (20 bar).
QJT-NYB Adapter fits !!\⁄fl"-16 pipe threadfor retrofitting to Quick UniJetSystem. Maximum operatingpressure to 300 psi (20 bar).
Retrofitting your conventionalspraying system to the QuickUniJet System is quick and easy.Special adapters with a femaleUniJet thread connection, attachto your current nozzle outletsand your spray bar or header.
QJ7421-NYB
Mounts to !\¤", #\›", or 1" pipe with #\°" (9.5mm) hole. Assemblyaccommodates pressures to 300 psi (20 bar). TypesQJ17560 and QJ7421 in 1⁄2"and 3⁄4" sizes can be mountedto a flat surface using themounting hole provided in theupper clamp sub-assembly.
QJ1⁄4TT-NYB
This assembly includes theQuick UniJet System with !\›" NPT or BSPT femaleconnection. Maximum operatingpressure to 300 psi (20 bar).
QJ1⁄4T-NYB
Includes the Quick UniJet Systemfeature with male !\›" NPT orBSPT connection. Maximumoperating pressure to 300 psi(20 bar).
QUICK
Part No. PipeConnection
QJQ\‰T-NYB Q\‰" NPT or BSPT (F)
Part No. PipeConnection
QJQ\‰TT-NYB Q\‰" NPT or BSPT (M)
Part No. To Clamp On
QJ17560-Q\„-NYB Q\„" PipeQJ17560-E\‰-NYB E\‰" PipeQJ17560-1-NYB 1" Pipe
Part No. To Clamp On
QJ7421-Q\„-NYB Q\„" PipeQJ7421-E\‰-NYB E\‰" PipeQJ7421-1-NYB 1" Pipe
Part No. To Fit
QJT-NYB QQ\ŒÁ"- 16 UniJet Thread
QJT-NYB 11⁄16) - 16
Part NumberQuick UniJet Caps Quick UniJet Quick UniJet Cap & For Use with Spray Tips
Cap Only Seat Gasket Set
CP25611- * -NY 25612- * -NYR
CP25609- * -NY 25610- * -NYR
CP25595- * -NY 25596- * -NYR
CP25607- * -NY 25608- * -NYR
CP25607- * -NY —
— QJ 4676**
— 19843-NYR**
Colors of Color Colors of ColorQuick UniJet Caps Code Quick UniJet Caps Code
Black 1 Green 5White 2 Yellow 6Red 3 Brown 7Blue 4 Orange 8
B7
UN
IJE
T S
YS
TE
M
COLOR-CODED CAPS
ORDERING INFORMATION
Quick UniJet Caps are availablein eight colors, enabling you todevelop your own color codingsystem.
Seat Gasket Ð made of EPDMcomes standard. Optional inVITON. The gasket sits firmlyover the tip inside the cap.
Spray Tip Ð All interchangeableUniJet spray tips for pressuresup to 300 psi (20 bar).
Cap Ð The caps are designedwith grooves that fit locating lugson the nozzle body. Caps aremade of nylon and are availablefor use with all UniJet spray tips.
Quick UniJet Cap and Seat Gasket Set
**Used withDisc-Core Sprays
(Insert Coreinto Seal)
D-Disc Core
18999-EPR**(EPDM Standard)
18999-VI**(VITON optional)
Permits use of standard !\°" and !\›" nozzles. Can be used for mounting pressure gauge at the nozzle. See Data Sheet No. 20055 for more information.
UniJet Flat Spray Tips(smaller capacities)
Standard Sizes thru TP _08
UniJet Flat Spray Tips(larger capacities)
Standard Sizes TP _10 thru TP_20
UniJet Flat Spray TipsSizes thru TP_08
Tips can be positioned in choice of two planes…parallel orperpendicular to wings of Quick UniJet cap.
For UniJet Tip Types:TX TG-W TCT-W TP TNTG TK TNSSTC
Provides shut-off at nozzle for quick spacing change or changein spray swath.
* Specify color code (see chart). Unless otherwise specified, a Yellow (6) Cap will be supplied.** These Quick UniJet Caps available only in black.
How to Order: For cap and seat gasket set, specify set no. and color code. Example: 25612-3-NYRFor cap only, specify part no. and color code. Example: CP25611-3-NYFor seat gasket, specify part no. Example: CP19438-EPR
QUICK
CP19438-VIVITONoptional
CP19438-EPREPDMStandardQuick UniJet Cap
seatgasket
Nozzle Max. Max.Type Length Hex Weight
1/4T + TX 1U\ˆ" QE\ŒÁ" 2Q\„ oz.1/4TT + TX 1QT\ŒÁ" QE\ŒÁ" 2Q\‰ oz.1/4T + T-W 1U\ˆ" QE\ŒÁ" 2Q\„ oz.1/4TT + T-W 1QT\ŒÁ" QE\ŒÁ" 2Q\‰ oz.
B8
UN
IJE
T S
YS
TE
MH
OLL
OW
CO
NE
HOLLOW CONE
130°138°140°140°140°140°140°140°
140°140°140°140°140°140°140°140°
136°137°138°138°138°136°136°136°
Tip No.and
CapacitySize
ScreenMesh
SPRAYANGLE
40°48°57°61°63°65°66°68°69°70°71°71°72°
54°59°63°68°70°72°73°73°74°74°75°76°76°77°78°78°
Tip No.and
CapacitySize
ScreenMesh
SPRAYANGLE*
TXHollow Cone spray tip
standard spray
T-WHollow Cone spray tip
wide spray
UNIJETCOMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + TX - SS 1.25
TipType
MaterialCode
CapacitySize
TFEMALE BODY
OR
TTMALE BODY
SCREEN STRAINER
SPRAY TIP(See Chart)
TIP RETAINER
PERFORMANCE DATA
ORDERING INFORMATION
DESIGN FEATURES
DIMENSIONS & WEIGHTS
SPRAY NOZZLE TIPS
TX series UniJet hollow conetips feature extra fine sprayatomization with a uniformdistribution at relatively lowpressures and capacities.
T-W series tips feature the samespray characteristics and con-struction as TX tips with an extrawide hollow cone spray angle.
CAPACITYgph (gallons per hour) at
psi (pound per square inch)
10psi
15psi
20psi
30psi
40psi
60psi
80psi
100psi
2.53.04.05.06.0
1.82.53.13.74.96.17.3
1.42.12.83.54.25.77.18.5
1.72.63.54.35.26.98.7
11.3
2.03.04.05.06.08.0
10.012.0
2.53.74.96.17.39.8
12.314.7
2.84.35.77.18.5
11.314.217.0
3.24.86.37.99.5
12.715.819.0
T2W Two .016 x .015 .031" 100T3W Two .020 x .019 .039" 100T4W Two .024 x .021 .044" 50T5W Two .028 x .027 .050" 50T6W Two .032 x .026 .055" 50T8W Two .036 x .029 .063" 50T10W Two .040 x .030 .070" 50T12W Two .044 x .029 .078" 50
OrificeDiam.
InletOpeningsin Inches 20
psi40psi
80psi
CAPACITYgph (gallons per hour) at
psi (pound per square inch)
20psi
30psi
40psi
60psi
80psi
100psi
150psi
200psi
400psi
1.51.82.22.93.64.45.77.28.69.9
12.815.618.4
.891.11.31.82.22.63.54.45.37.08.7
10.512.115.619.122.5
1.01.251.52.02.53.04.05.06.08.0
10.012.014.018.022.026.0
.711.21.51.82.43.03.64.86.07.29.7
12.114.617.122.026.931.8
.801.31.72.02.73.44.15.56.98.2
11.113.916.719.725.431.036.7
.881.51.82.23.03.74.56.17.69.1
12.415.518.622.128.434.741.0
1.01.72.22.63.64.45.37.39.1
11.015.018.822.627.034.742.450.1
1.21.92.42.94.05.06.18.3
10.412.517.321.625.931.140.048.957.8
1.62.63.23.95.56.88.2
11.414.317.124.030.136.143.956.468.981.5
TX.60 One .012 x .010 .014" 200TX1 One .016 x .015 .020" 100TX1.25 One .020 x .020 .022" 100TX1.5 One .024 x .020 .024" 100TX2 One .028 x .024 .028" 100TX2.5 One .030 x .029 .031" 100TX3 One .036 x .034 .034" 100TX4 One .040 x .034 .041" 50TX5 Two .032 x .032 .044" 50TX6 Two .040 x .032 .047" 50TX8 Two .040 x .036 .055" 50TX10 Two .050 x .030 .060" 50TX12 Two .050 x .034 .067" 50TX14 Two .055 x .034 .070" 50TX18 Two .060 x .031 .079" 50TX22 Two .065 x .030 .086" 50TX26 Two .065 x .030 .094" 50
OrificeDiam.
InletOpeningsin Inches 20
psi40psi
*Spray Angle of all above tips is 80° at 100 psi.
B9
UN
IJE
T S
YS
TE
MH
OLL
OW
CO
NE
The D series disc and core typeUniJet hollow cone nozzles provide a finely atomized,uniform spray pattern. This typeof nozzle is often used forspraying materials which containsuspended abrasivesÉand alsoengineered to assure accuratespray performance.
They feature a disc and core typeconstruction in stainless steel,brass or tungsten carbide forexcellent wear resistance.Complete nozzle assembliesinclude a nozzle body and tipretainer, slotted strainer, core andorifice disc.
HOLLOW CONE
DHollow Cone spray nozzle
disc and core type
ⓦ Fugitive dust control
ⓦ Gas cooling
ⓦ Spraying abrasive liquids
ⓦ Washing gas/air to captureparticulates
ⓦ Applications requiring in-linehollow cone sprays
DESIGN FEATURES
DIMENSIONS & WEIGHTS
ORDERING INFORMATIONUNIJET
COMPLETE NOZZLEORIFICE
DISC & CORE
1/4TT + D4 - 25 HSSNozzleBody
OrificeDiscNo.
CoreNo.
CoreMaterial
SPRAY NOZZLES
TFEMALE BODY
OR
TTMALE BODY
SLOTTED STRAINER
CORE(See Chart)
DISC(See Chart)
TIP RETAINER
COMMON APPLICATIONS
Nozzle Max. Max.Type Length Hex Weight
1/4T + D 17⁄16) 13⁄16) 21⁄4 oz.
1/4TT + D 11⁄2) 13⁄16) 2 oz.
B10
UN
IJE
T S
YS
TE
MH
OLL
OW
CO
NE
“D” TYPE HOLLOW CONESPRAY NOZZLE
38°49°53°69°
34°51°58°68°79°84°
39°52°67°73°79°85°91°97°
103°108°
32°40°62°67°73°81°86°90°97°
101°108°
14°23°33°42°48°
51°55°67°70°79°47°51°63°69°82°89°93°27°38°51°61°74°79°85°91°96°
102°109°113°22°33°46°53°69°73°79°86°90°93°
100°104°111°13°15°18°20°29°39°48°53°60°66°
62°66°72°75°83°58°62°70°75°87°94°98°43°49°58°67°80°84°89°93°97°
103°112°114°34°44°55°60°72°76°81°87°90°93°
102°105°112°15°17°21°24°33°42°50°56°62°68°13°15°
Nozzle No.
Type T Type TTFem. Conn. Male Conn.
OrificeDiscNo.
CoreNo.
SPRAYANGLE
PERFORMANCE DATA
STRAINER NOTE: For nozzles using Orifice Disc Nos. 1, 1.5 and 2 or Core Nos. 13 and 23ÉSlottedStrainer No. 4514-20 equivalent to 25 mesh screen size is supplied. For all other larger capacity Discs andCoresÉSlotted Strainer No. 4514-32 equivalent to 16 mesh screen size is supplied.
SPRAY NOZZLE
TFEMALE BODY
OR
TTMALE BODY
SLOTTED STRAINER
CORE(See Chart)
DISC(See Chart)
TIP RETAINER
CAPACITYgpm (gallons per minute) at psi (pounds per square inch)
10psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
200psi
300psi
.070
.065
.082
.095
.112
.10
.15
.18
.23
.26
.31
.38
.46
.51
.18
.23
.29
.33
.41
.54
.67
.75
.86
.28
.38
.55
.057
.064
.071.09
.064
.078
.087
.113.13.15
.12
.14
.21
.25
.32
.37
.43
.54
.61
.72
.14
.17
.25
.32
.41
.48
.59
.77
.951.071.25
.23
.39
.54
.78
.98
.059
.067
.075.08.11
.064
.076
.092.10.14.16.19
.088
.118.14.17.25.30.39.45.53.65.80.88
.14
.18
.20
.31
.39
.50
.59
.72
.941.171.321.54
.24
.28
.48
.66
.951.221.592.15
.066
.075.08.09.12
.072
.086.10.12.15.18.21
.101
.135.16.19.29.35.44.52.61.76.93
1.03.125.16.20.23.36.45.58.68.84
1.101.361.531.79.145.213.27.32.56.77
1.101.391.842.48
.078
.088.10.11.14
.080
.103.13.14.19.22.26
.122
.162.19.23.35.42.54.63.75.93
1.151.26.148.20.25.28.43.55.72.84
1.041.351.681.892.20.178.260.33.39.68.94
1.351.722.253.05.180.262
.088
.098.11.12.16
.096
.117.14.16.21.25.29
.138
.185.22.26.40.48.62.73.89
1.071.321.47.170.23.28.33.50.64.83.97
1.211.571.952.192.57.205.300.37.45.78
1.101.581.972.623.53.208.302
.097
.110.12.13.17
.107
.130.16.18.23.28.32
.156
.205.25.29.45.54.70.81.97
1.211.471.65.190.25.32.36.56.71.93
1.111.351.772.202.452.89.23.33.42.51.88
1.251.732.222.933.96.23.33
.115
.127.14.16.20
.124
.155.19.21.28.34.39
.185
.245.29.35.54.65.85.98
1.191.481.812.02.225.31.38.44.68.86
1.151.351.682.182.693.003.54.28.41.50.61
1.071.502.162.733.604.83.28.41
.128
.142.16.18.23
.139
.175.21.24.32.38.45
.210
.280.34.40.62.75.97
1.181.361.712.092.34.257.35.44.51.78.99
1.331.571.942.503.113.494.11.32.46.57.70
1.271.732.50.3154.175.59.33.47
.152
.167.18.20.27
.164
.210.25.28.38.46.54
.255.33.41.48.75.90
1.191.371.682.1
2.552.89.310.43.53.62.95
1.221.641.942.403.103.804.305.20.39.56.68.86
1.522.133.063.855.056.8.40.57
Q\‰TD1-13 Q\‰TTD1-13 D1 13 .031"Q\‰TD1.5-13 Q\‰TTD1.5-13 D1.5 13 .036"Q\‰TD2-13 Q\‰TTD2-13 D2 13 .041"Q\‰TD3-13 Q\‰TTD3-13 D3 13 .047"Q\‰TD4-13 Q\‰TTD4-13 D4 13 .063"
Q\‰TD1-23 Q\‰TTD1-23 D1 23 .031"Q\‰TD1.5-23 Q\‰TTD1.5-23 D1.5 23 .036"Q\‰TD2-23 Q\‰TTD2-23 D2 23 .041"Q\‰TD3-23 Q\‰TTD3-23 D3 23 .047"Q\‰TD4-23 Q\‰TTD4-23 D4 23 .063"Q\‰TD5-23 Q\‰TTD5-23 D5 23 .078"Q\‰TD6-23 Q\‰TTD6-23 D6 23 .094"
Q\‰TD1-25 Q\‰TTD1-25 D1 25 .031"Q\‰TD1.5-25 Q\‰TTD1.5-25 D1.5 25 .036"Q\‰TD2-25 Q\‰TTD2-25 D2 25 .041"Q\‰TD3-25 Q\‰TTD3-25 D3 25 .047"Q\‰TD4-25 Q\‰TTD4-25 D4 25 .063"Q\‰TD5-25 Q\‰TTD5-25 D5 25 .078"Q\‰TD6-25 Q\‰TTD6-25 D6 25 .094"Q\‰TD7-25 Q\‰TTD7-25 D7 25 .109"Q\‰TD8-25 Q\‰TTD8-25 D8 25 .125"Q\‰TD10-25 Q\‰TTD10-25 D10 25 .156"Q\‰TD12-25 Q\‰TTD12-25 D12 25 .188"Q\‰TD14-25 Q\‰TTD14-25 D14 25 .219"
Q\‰TD1-45 Q\‰TTD1-45 D1 45 .031"Q\‰TD1.5-45 Q\‰TTD1.5-45 D1.5 45 .036"Q\‰TD2-45 Q\‰TTD2-45 D2 45 .041"Q\‰TD3-45 Q\‰TTD3-45 D3 45 .047"Q\‰TD4-45 Q\‰TTD4-45 D4 45 .063"Q\‰TD5-45 Q\‰TTD5-45 D5 45 .078"Q\‰TD6-45 Q\‰TTD6-45 D6 45 .094"Q\‰TD7-45 Q\‰TTD7-45 D7 45 .109"Q\‰TD8-45 Q\‰TTD8-45 D8 45 .125"Q\‰TD10-45 Q\‰TTD10-45 D10 45 .156"Q\‰TD12-45 Q\‰TTD12-45 D12 45 .188"Q\‰TD14-45 Q\‰TTD14-45 D14 45 .219"Q\‰TD16-45 Q\‰TTD16-45 D16 45 .250"
Q\‰TD1-46 Q\‰TTD1-46 D1 46 .031"Q\‰TD1.5-46 Q\‰TTD1.5-46 D1.5 46 .036"Q\‰TD2-46 Q\‰TTD2-46 D2 46 .041"Q\‰TD3-46 Q\‰TTD3-46 D3 46 .047"Q\‰TD4-46 Q\‰TTD4-46 D4 46 .063"Q\‰TD5-46 Q\‰TTD5-46 D5 46 .078"Q\‰TD6-46 Q\‰TTD6-46 D6 46 .094"Q\‰TD7-46 Q\‰TTD7-46 D7 46 .109"Q\‰TD8-46 Q\‰TTD8-46 D8 46 .125"Q\‰TD10-46 Q\‰TTD10-46 D10 46 .156"
Q\‰TD1-56 Q\‰TTD1-56 D1 56 .031"Q\‰TD1.5-56 Q\‰TTD1.5-56 D1.5 56 .036"
OrificeDiam.
20psi
40psi
80psi
Material Material Codes
no material code = Brass
SS = 303 Stainless Steel
B11
UN
IJE
T S
YS
TE
MFU
LL C
ON
E
FULL CONE (STANDARD SPRAY ANGLE)
TG series UniJet full cone spraytip assemblies feature all theuseful options of the UniJetSystem such as interchangeablenozzle strainers, nozzle checkvalves and swivel connectors,plus a selection of flow ratecapacities that fills out the lowend of the FullJet¨ nozzle family.
The spray tips feature a solidcone-shaped spray pattern witha round impact area. A uniquedesign results in a uniform spraydistribution, and superior controlcharacteristics.
45°58°
50°56°56°54°54°58°50°65°50°65°50°67°
61°63°63°62°63°53°46°59°46°59°46°61°
NozzleInlet
Conn.NPT orBSPT
CapacitySize
SPRAYANGLE
*Foreign matter with maximum diameter as listedcan pass through nozzle without clogging.
TGFull Cone Spray Nozzle Tip
ⓦ Washing & rinsing processes
ⓦ Quenching & cooling of coke,primary metals and other materials
ⓦ Suppression of fugitive dust in the processing of bulk ores, coal, limestone, sand and gravel
ⓦ Scrubbing, washing andcooling of flue gases to removefly ash and other products ofcombustion
ⓦ Deluging combustible materialsand storage tanks for fire suppression and prevention
ⓦ Breaking up and deaeratingfoam
ⓦ Creating and dispersingdroplets in chemical reactionprocessing
MESH SELECTIONGUIDE
Equivalent RecommendedOrifice Screen
Diameter Mesh
UP THROUGH.018" (.46 mm) 200
.019" (.47 mm)THROUGH 100
.031" (.79 mm)
.032" (.80 mm)AND LARGER 50
SPRAY NOZZLE TIP
UNIJETCOMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + TG - SS 10
TipType
MaterialCode
CapacitySize
TFEMALE BODY
OR
TTMALE BODY
SPRAY TIP(See Chart)
TIP RETAINER COMMON APPLICATIONS
PERFORMANCE DATA
DESIGN FEATURES
DIMENSIONS & WEIGHTS
ORDERING INFORMATION
COMMON APPLICATIONS
CAPACITY(gallons per minute)
5psi
7psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
.47
.73.55.85
.20
.30
.35
.50
.651.0
.042
.057
.071
.085.10.14.28.42.48.69.891.4
.052
.069
.087.10.12.17.34.50.58.821.11.7
.060
.080.10.12.14.19.38.57.67.951.31.9
.073
.098.12.15.17.23.46.69.811.21.52.4
.085.11.14.17.20.26.53.79.921.31.72.7
.095.13.16.19.22.30.59.881.01.51.93.0
.12
.16
.19
.23
.27
.36
.771.11.31.82.33.6
0.3 .020 .0160.4 .022 .0180.5 .024 .0200.6 .027 .0200.7 .030 .020
1/4 1 .036 .0252 .047 .0403 .062 .040
3.5 .067 .0505 .082 .050
6.5 E\´„ Q\ŒÁ10 U\Á‰ Q\ŒÁ
MaximumFree
PassageDiam.*Inches
OrificeDiam.Nom.Inches 7
psi20psi
80psi
Nozzle Max. Max.Type Length Hex Weight
1/4T + TG 1WO\´„" QE\ŒÁ" 2Q\„ oz.
1/4TT + TG 1EQ\´„" QE\ŒÁ" 2Q\‰ oz.
B12
UN
IJE
T S
YS
TE
MFU
LL C
ON
E
SQUARE SPRAY
TG-SQ series UniJet full conespray tips feature a solid cone-shaped spray pattern with asquare impact area. The spraytips produce a uniform spray ofmedium to large size dropletsacross their entire spray area.
They are well-suited for installa-tions requiring complete coverageof rectangular areas or sprayzones. All spray tip assembliesfeature all the useful options ofthe UniJet System plus a wideselection of flow rate capacities.
70°71°
75°75°
68°68°
NozzleInlet
Conn.NPT orBSPT
CapacitySize
SPRAYANGLE
*Foreign matter with maximum diameter as listed can pass through nozzle without clogging.
Material Material Code
no material code = Brass
SS = 303 Stainless Steel
TG-SQFull Cone Nozzle Tip
square spray
ⓦ Cooling & quenching
ⓦ Product washing
ⓦ Air and gas washers
ⓦ Scrubbers
ⓦ Liquor washers
ⓦ Dust control
ⓦ Fire protection
SPRAY NOZZLE TIP
UNIJETCOMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + TG - 12SQ
TipType
MaterialCode
CapacitySize
TFEMALE BODY
OR
TTMALE BODY
SPRAY TIP(See Chart)
TIP RETAINER
PERFORMANCE DATA
DESIGN FEATURES
DIMENSIONS & WEIGHTS
ORDERING INFORMATION
COMMON APPLICATIONS
CAPACITY(gallons per minute)
5psi
7psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
.861.3
1.01.5
1.21.8
1.72.5
2.03.0
2.33.4
2.84.1
3.24.7
3.55.3
4.36.4
1/4 12SQ Q\ˆ Q\ŒÁ
3/8 18SQ T\´„ E\´„
MaximumFree
PassageDiam.*Inches
OrificeDiam.Nom.Inches 7
psi20psi
80psi
Nozzle Max. Max.Type Length Hex Weight
1/4T + TG-SQ 2QT\ŒÁ" QE\ŒÁ" 2.5 oz.
1/4TT + TG-SQ 3" QE\ŒÁ" 2.5 oz.
B13
UN
IJE
T S
YS
TE
MFU
LL C
ON
E
COMMON APPLICATIONS
FULL CONE (WIDE ANGLE)STANDARD TYPE
ORDERING INFORMATION
TG-W Wide Angle full conespray tips produce a uniformspray of medium to coarsedroplets across their entire sprayareaÉ giving excellent results inspraying applications requiringcomplete coverage. The wideangle spray tips feature a solidcone-shaped spray pattern with
a round impact area and sprayangles of 102¡ to 120¡Éprovidinga wide selection of low flowrates.The uniform spray distribu-tion results from a unique internaldesignÉand engineered toassure accurate and consistentperformance.
112°114°114°
120°120°120°120°120°120°120°
102°102°102°103°103°103°103°
NozzleInlet Conn.
NPT orBSPT
CapacitySize
SPRAYANGLE
*Foreign matter with maximum diameter as listedcan pass through nozzle without clogging.
Material Material Code
no material code = Brass
SS = 303 Stainless Steel
PERFORMANCE DATA
DESIGN FEATURES
TG-WFull Cone Nozzle Tip
Wide Angle Spray
UNIJETCOMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + TG - SS 14W
TipType
MaterialCode
CapacitySize
DIMENSIONS & WEIGHTS
ⓦ Washing & rinsing processes
ⓦ Quenching & cooling of coke,primary metals and other materials
ⓦ Suppression of fugitive dust in the processing of bulk ores,coal, limestone, sand and gravel
ⓦ Scrubbing, washing andcooling of flue gases toremove fly ash and other products of combustion
ⓦ Deluging combustible materialsand storage tanks for fire suppression and prevention
ⓦ Breaking up and deaeratingfoam
ⓦ Creating and dispersingdroplets in chemical reactionprocessing
SPRAY NOZZLE TIP
TFEMALE BODY
OR
TTMALE BODY
SCREEN STRAINER
SPRAY TIP(See Chart)
TIP RETAINER
CAPACITY(gallons per minute)
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
80psi
.74
.891.0
.48
.68
.861.01.2
.28
.43
.56
.801.01.21.4
.33
.51
.67
.961.21.41.7
.38
.58
.761.11.41.61.9
.45
.70
.911.31.61.92.3
.51
.791.01.51.82.22.6
.61
.951.21.82.22.63.1
.701.11.42.02.53.03.5
2.8W Q\ŒÁ .040
1/8 4.3W T\Á‰ .0405.6W E\´„ .040
8W E\´„ .05010W U\Á‰ .050
1/4 12W Q\ˆ .05014W O\Á‰ Q\ŒÁ
MaximumFree
PassageDiam.*Inches
OrificeDiam.Nom.Inches 5
psi10psi
80psi
Nozzle Max. Max.Type Length Hex Weight
1/4T + TG-W wT\´„" QE\ŒÁ" 3.0 oz.
1/4TT + TG-W wU\´„" QE\ŒÁ" 2.5 oz.
MESH SELECTIONGUIDE
Equivalent RecommendedOrifice Screen
Diameter Mesh
UP THROUGH.018" (.46 mm) 200
.019" (.47 mm)THROUGH 100
.031" (.79 mm)
.032" (.80 mm)AND LARGER 50
UNIJETCOMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + TH - SS 10W
B14
UN
IJE
T S
YS
TE
MFU
LL C
ON
E
FULL CONE (WIDE ANGLE)STANDARD TYPE
TH-W Wide Angle full conespray tips are designed so thatthe spray tip serves as tip andtip retainer in one. The spray tipthreads directly into UniJet bodies Uniform spray distributionresults from a unique internaldesign.
The spray tips produce a uniformspray of medium to coarse dropletsÉfeaturing a solid cone-shaped spray pattern witha round impact area and sprayangles of 102¡ to 120¡.They wereengineered to assure accurateand consistent performance.
112°114°114°114°114°114°114°114°
120°120°120°120°120°120°120°120°120°120°120°120°
102°102°102°103°103°103°103°104°104°106°108°108°
NozzleInlet Conn.
NPT orBSPT
CapacitySize
SPRAYANGLE
*Foreign matter with maximum diameter as listed can pass through nozzle without clogging.
Material Material Code
SS = 303 Stainless Steel
TH-WFull Cone Nozzle Tip
Wide Angle Spray
TipType
MaterialCode
CapacitySize
TFEMALE BODY
OR
TTMALE BODY
SPRAY TIPAND RETAINER
(See Chart)
COMMON APPLICATIONS ORDERING INFORMATION
DESIGN FEATURES
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
ⓦ Washing & rinsing processes
ⓦ Quenching & cooling of coke,primary metals and other materials
ⓦ Suppression of fugitive dust in the processing of bulk
ores, coal, limestone, sand and gravel
ⓦ Scrubbing, washing andcooling of flue gases toremove fly ash and other products of combustion
SPRAY NOZZLE TIP
Q
CAPACITY(gallons per minute)
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
80psi
.741.01.31.51.82.02.22.6
.48
.68
.861.21.51.72.12.32.63.0
.28
.43
.56
.801.01.41.72.02.42.73.03.5
.33
.51
.67
.961.21.72.02.42.93.23.64.2
.38
.58
.761.11.41.92.32.73.33.74.14.8
.45
.70
.911.31.62.32.83.23.94.44.95.7
.51
.791.01.51.82.63.13.74.45.05.56.4
.61
.951.21.82.23.13.74.45.35.96.67.7
.701.11.42.02.53.54.25.06.06.77.58.7
2.8W Q\ŒÁ .040
1/8 4.3W T\Á‰ .0405.6W E\´„ .040
8W E\´„ .050
1/4 10W U\Á‰ .05014W O\Á‰ Q\ŒÁ
17W T\´„ Q\ŒÁ
3/8 20W QQ\Á‰ E\´„24W E\ŒÁ E\´„27W QE\Á‰ U\Á‰
1/2 30W U\´„ U\Á‰35W QT\Á‰ Q\ˆ
MaximumFree
PassageDiam.*Inches
OrificeDiam.Nom.Inches 5
psi20psi
80psi
Nozzle Max. Max.Type Length Hex Weight
1/4T + TH-W 2O\Á‰" QE\ŒÁ" 3.0 oz.
1/4TT + TH-W 2U\´„" QE\ŒÁ" 3.0 oz.
B15
UN
IJE
T S
YS
TE
MFU
LL C
ON
E
FULL CONE (STANDARD TYPE)
49°57°62°63°27°37°45°48°50°19°23°40°45°68°67°
20°26°34°45°52°62°
47°65°63°65°32°43°52°54°56°23°27°44°50°70°69°14°20°26°32°39°52°57°65°
43°53°61°63°35°45°55°57°61°26°29°47°52°71°71°17°23°29°34°41°54°59°67°
Nozzle No.
Type T Type TTFem. Conn. Male Conn.
OrificeDiscNo.
CoreNo.
SPRAYANGLE
PERFORMANCE DATA
DESIGN FEATURES
STRAINER NOTE: For nozzles using Orifice Disc Nos. 1, 1.5 and 2 or coreNos. 31 and 33ÉSlotted Strainer No. 4514-20 equivalent to 25 mesh screensize is supplied. For all other larger capacity Discs and CoresÉSlottedStrainer No. 4514-32 equivalent to 16 mesh screen size is supplied.
DFull Cone Spray Nozzle
Disc and Core TypeThe D series disc and core typeUniJet full cone nozzles providea finely atomized uniform spraypattern.
They feature a disc and coretype construction in stainlesssteel, brass or tungsten carbidefor excellent wear resistance.Complete nozzle assembliesinclude a nozzle body and tipretainer, slotted strainer, coreand orifice disc.
ⓦ Spraying wettable powders and abrasive liquids
ⓦ Dust supression in processingcoal, ores, gravel
ⓦ Scrubbing and washing of gases
DIMENSIONS & WEIGHTS ORDERING INFORMATIONUNIJET
COMPLETE NOZZLEORIFICE
DISC & CORE
+ D2 - 56 HSSNOZZLEBODY
OrificeDiscNo.
CoreMaterial
CoreNo.
SPRAY NOZZLE
TFEMALE BODY
OR
TTMALE BODY
SLOTTED STRAINER
CORE(See Chart)
DISC(See Chart)
TIP RETAINER
COMMON APPLICATIONS
CAPACITYgpm (gallons per minute) at psi (pounds per square inch)
10psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
200psi
300psi
.08
.10
.12
.13
.09
.12
.13
.15
.20
.08
.10
.14
.16
.27
.34
.38
.55
.76
.961.35
.11
.14
.16
.18
.11
.15
.17
.21
.28
.11
.14
.18
.22
.37
.48
.39
.54
.781.071.361.91
.13
.17
.19
.21
.12
.17
.21
.25
.34
.13
.17
.24
.26
.44
.58
.21
.29
.48
.66
.951.321.672.34
.15
.19
.22
.24
.14
.19
.24
.29
.39
.14
.19
.25
.30
.50
.66
.25
.34
.55
.761.101.521.932.70
.18
.23
.26
.29
.17
.23
.29
.36
.47
.17
.23
.30
.36
.60
.80
.30
.41
.67
.931.351.862.363.31
.20
.26
.30
.33
.20
.26
.33
.41
.54
.20
.26
.34
.41
.70
.92
.35
.48
.781.081.552.152.733.82
.23
.29
.33
.37
.22
.30
.37
.45
.60
.22
.29
.37
.45
.791.0.39.53.87
1.201.742.403.054.26
.27
.35
.40
.44
.26
.36
.45
.55
.73
.26
.34
.45
.55
.931.2.47.65
1.061.472.132.943.735.22
.31
.40
.45
.50
.30
.41
.52
.63
.83
.29
.39
.51
.621.11.4.55.75
1.231.692.463.404.326.03
.37
.48
.55
.60
.37
.50
.63
.761.02.35.46.60.741.31.7.67.92
1.512.083.024.165.287.39
Q\‰TD1-31 Q\‰TTD1-31 D1 31 .031"Q\‰TD1.5-31 Q\‰TTD1.5-31 D1.5 31 .036"Q\‰TD2-31 Q\‰TTD2-31 D2 31 .041"Q\‰TD3-31 Q\‰TTD3-31 D3 31 .047"
Q\‰TD1-33 Q\‰TTD1-33 D1 33 .031"Q\‰TD1.5-33 Q\‰TTD1.5-33 D1.5 33 .036"Q\‰TD2-33 Q\‰TTD2-33 D2 33 .041"Q\‰TD3-33 Q\‰TTD3-33 D3 33 .047"Q\‰TD4-33 Q\‰TTD4-33 D4 33 .063"
Q\‰TD1-35 Q\‰TTD1-35 D1 35 .031"Q\‰TD1.5-35 Q\‰TTD1.5-35 D1.5 35 .036"Q\‰TD2-35 Q\‰TTD2-35 D2 35 .041"Q\‰TD3-35 Q\‰TTD3-35 D3 35 .047"Q\‰TD4-35 Q\‰TTD4-35 D4 35 .063"Q\‰TD5-35 Q\‰TTD5-35 D5 35 .078"
Q\‰TD2-56 Q\‰TTD2-56 D2 56 .041"Q\‰TD3-56 Q\‰TTD3-56 D3 56 .047"Q\‰TD4-56 Q\‰TTD4-56 D4 56 .063"Q\‰TD5-56 Q\‰TTD5-56 D5 56 .078"Q\‰TD6-56 Q\‰TTD6-56 D6 56 .094"Q\‰TD7-56 Q\‰TTD7-56 D7 56 .109"Q\‰TD8-56 Q\‰TTD8-56 D8 56 .125"Q\‰TD10-56 Q\‰TTD10-56 D10 56 .156"
OrificeDiam.
20psi
40psi
80psi
Nozzle Max. Max.Type Length Hex Weight
1/4T + D 1U\ŒÁ" QE\ŒÁ" 21⁄4 oz.
1/4TT + D 1Q\„" QE\ŒÁ" 2 oz.
B16
UN
IJE
T S
YS
TE
MFL
AT S
PR
AY
FLAT SPRAY (STANDARD TYPE)
TP flat spray tips feature a highimpact solid stream or flat spraypattern with spray angles of 0¡(solid stream) to 110¡. They produce a uniform distribution ofsmall to medium-sized droplets.Specially tapered spray patternedges provide even spray cover-age when several nozzles withoverlapping patterns are required.
All TP spray tips are precisionmachined to provide exact flowrates and spray angles. Thespray tip orifices are recessed toprotect against damageÉandfeature unobstructed flowpassages to minimize clogging.These tips offer advantages ofthe UniJet system such as inter-changeable spray nozzle tips,strainers and other components.
ⓦ Metal cleaning and processing
ⓦ Spray coating
ⓦ Degreasing and rinsing
ⓦ Parts washers
ⓦ Spray cooling
ⓦ Pressure cleaning
ⓦ Sand, coal and gravel washing
NOTE: FOR PERFORMANCE DATA ONTHE “TP” FLAT SPRAY TIPS SEENEXT PAGE PLEASE.
TP
UNIJETCOMPLETE NOZZLE
SPRAY TIP
+ TP 11010 -SSTip
Type(Only used
when orderingtip alone)
MaterialCode
CapacitySize
MESH SELECTIONGUIDE
Equivalent RecommendedOrifice Screen
Diameter Mesh
UP THROUGH.018" (.46 mm) 200
.019" (.47 mm)THROUGH 100
.031" (.79 mm)
.032" (.80 mm)AND LARGER 50
SPRAY NOZZLE TIP
NOZZLEBODY
TFEMALE BODY
OR
TTMALE BODY
SCREEN STRAINER
SPRAY TIP(See Chart)
TIP RETAINER
ORDERING INFORMATIONSTRAINER INFORMATION
DESIGN FEATURES
DIMENSIONS & WEIGHTSCOMMON APPLICATIONS
Nozzle Max. Max.Type Length Hex Weight
1/4T + TP qTE\Á‰" QE\ŒÁ" 2Q\‰ oz.
1/4TT + TP qTU\Á‰" QE\ŒÁ" 2 oz.
B17
UN
IJE
T S
YS
TE
MFL
AT S
PR
AY
FLAT SPRAY
94°97°98°99°
100°100°101°102°103°104°105°105°81°82°82°83°84°84°86°87°89°90°90°91°92°93°93°93°61°67°68°68°69°70°71°71°72°72°73°74°74°74°74°74°75°75°50°53°53°54°55°56°58°59°60°63°64°65°44°45°47°48°50°51°51°52°53°53°53°54°55°
110°110°110°110°110°110°110°110°110°110°110°110°95°95°95°95°95°95°95°95°95°95°95°95°95°95°95°95°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°73°73°73°73°73°73°73°73°73°73°73°73°65°65°65°65°65°65°65°65°65°65°65°65°65°
121°121°120°120°119°118°117°117°117°117°117°117°105°105°105°104°103°102°101°100°100°100°100°101°100°99°99°99°95°94°89°89°88°87°86°86°85°84°84°83°83°83°83°83°83°83°89°87°86°85°84°83°82°81°80°79°77°77°77°77°76°75°75°74°74°73°72°72°72°72°71°
124°124°123°123°122°122°122°121°119°118°118°118°113°113°113°111°108°107°106°105°105°105°105°105°105°103°103°103°101°99°92°92°91°90°89°89°88°87°87°86°86°86°86°85°85°86°97°93°92°90°88°87°86°85°84°83°82°80°86°84°83°82°81°80°80°79°78°76°76°75°74°
CapacitySize
SPRAYANGLE
PERFORMANCE DATA
MESH SELECTIONGUIDE
Equivalent RecommendedOrifice Screen
Diameter Mesh
UP THROUGH.018" (.46 mm) 200
.019" (.47 mm)THROUGH 100
.031" (.79 mm)
.032" (.80 mm)AND LARGER 50
SPRAY NOZZLE TIP
TFEMALE BODY
OR
TTMALE BODY
SCREEN STRAINER
SPRAY TIP(See Chart)
TIP RETAINER
CAPACITY(gallons per minute)
5psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
200psi
300psi
500psi
.03
.05
.07
.11
.14
.18
.21
.28
.35
.53
.711.1.03.05.07.11.14.18.21.28.35.53.711.11.41.82.12.5
.07
.11
.14
.18
.21
.28
.35
.53
.711.11.41.82.12.5
.04
.05
.08
.11
.14
.16
.22
.27
.33
.07
.11
.14
.18
.21
.28
.05
.07
.10
.15
.20
.25
.30
.40
.50
.751.01.5.05.07.10.15.20.25.30.40.50.751.01.52.02.53.03.5
.03
.05
.07
.10
.15
.20
.25
.30
.40
.50
.751.01.52.02.53.03.5
.020
.039.06.08.12.15.19.23.31.38.46
.03
.05
.07
.10
.15
.20
.25
.30
.40
.07
.11
.14
.21
.28
.35
.42
.56
.711.11.42.1.07.11.14.21.28.35.42.56.711.11.42.12.83.54.24.9
.035.05.07.11.14.21.28.35.42.56.711.11.42.12.83.54.24.9
.016
.028
.055.08.11.16.22.27.33.44.54.65
.012
.018
.023
.035.05.07.11.14.21.28.35.42.56
.09
.13
.17
.26
.35
.43
.52
.69
.861.31.72.6.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.1
.043.06.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.1
.020
.034
.067.10.13.20.27.33.40.53.67.80
.015
.022
.029
.043.06.09.13.17.26.35.43.52.69
.10
.15
.20
.30
.40
.50
.60
.801.01.52.03.0.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.0
.050
.067.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.0
.023
.039
.077
.116
.154
.231
.308
.385
.462
.616
.770
.924
.017
.025
.033
.050
.067.10.15.20.30.40.50.60.80
.12
.18
.25
.37
.49
.61
.73
.981.21.82.53.7.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.6.06.08.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.6
.028
.048.09.14.19.28.38.47.57.75.941.1
.021
.031
.040
.060.08.12.18.25.37.49.61.73.98
.14
.21
.28
.42
.57
.71
.851.11.42.12.84.2.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9.07.09.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9
.032
.055.11.16.22.33.44.54.65.871.11.3
.024
.035
.047.07.09.14.21.28.42.57.71.851.1
.16
.24
.32
.47
.63
.79
.951.31.62.43.24.7.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.1.08.11.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.1.036.062.12.18.24.37.49.61.73.981.21.5
.027
.040
.052.08.11.16.24.32.47.63.79.951.3
.22
.34
.45
.67
.891.11.31.82.23.44.56.7.22.34.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7.11.15.22.34.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7.051.087.17.26.34.52.69.861.01.41.72.1
.038.06.07.11.15.22.34.45.67.891.11.31.8
.27
.41
.55
.821.11.41.62.22.74.15.58.2.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2.14.18.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2.063.11.21.32.42.63.841.11.31.72.12.5
.047.07.09.14.18.27.41.55.821.11.41.62.2
.35
.53
.711.11.41.82.12.83.55.37.1
10.6.35.53.711.11.41.82.12.83.55.37.1
10.614.217.7
2125.18.24.35.53.711.11.41.82.12.83.55.37.1
10.614.217.7
2125
.081.14.27.41.54.821.11.41.62.22.73.3.06.09.12.18.24.35.53.711.11.41.82.12.8
11001 .026110015 .03111002 .03611003 .04311004 .052
110° 11005 .05711006 .06211008 .07211010 T\Á‰11015 E\´„11020 U\Á‰11030 O\Á‰
9501 .02695015 .0319502 .0369503 .0439504 .0529505 .0579506 .062
95° 9508 .0729510 T\Á‰9515 E\´„9520 U\Á‰9530 O\Á‰9540 T\´„9550 QQ\Á‰9560 E\ŒÁ9570 QE\Á‰
800050 .018800067 .0218001 .02680015 .0318002 .0368003 .0438004 .0528005 .057
80° 8006 .0628008 .0728010 T\Á‰8015 E\´„8020 U\Á‰8030 O\Á‰8040 T\´„8050 QQ\Á‰8060 E\ŒÁ8070 QE\Á‰
730023 .012730039 .016730077 .022730116 .028730154 .032
73° 730231 .040730308 .045730385 .051730462 .056730616 .065730770 .072730924 .078650017 .011650025 .013650033 .015650050 .018650067 .0216501 .026
65° 65015 .0316502 .0366503 .0436504 .0526505 .0576506 .0626508 .072
SprayAngle
at 40 psi
Equiv.OrificeDiam.Inches 20
psi40psi
80psi
200psi
B18
UN
IJE
T S
YS
TE
MFL
AT S
PR
AY
FLAT SPRAY
CapacitySize
SPRAYANGLE
Material Material Code
no material code = Brass
SS = 303 Stainless Steel
MESH SELECTIONGUIDE
Equivalent RecommendedOrifice Screen
Diameter Mesh
UP THROUGH.018" (.46 mm) 200
.019" (.47 mm)THROUGH 100
.031" (.79 mm)
.032" (.80 mm)AND LARGER 50
SPRAY NOZZLE TIP
56°56°57°58°59°60°60°60°27°29°30°32°35°37°38°39°40°42°44°45°45°45°45°45°45°46°46°46°46°21°22°22°22°24°26°27°29°30°30°31°31°31°32°32°32°33°34°35°35°35°
14°15°15°15°16°16°17°
65°65°65°65°65°65°65°65°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°25°25°25°25°25°25°25°25°25°25°25°25°
71°70°70°69°68°68°68°68°65°64°62°60°60°59°58°57°56°56°56°56°55°55°55°55°55°54°54°54°54°54°53°53°53°53°52°52°51°50°50°49°49°47°45°45°45°45°45°45°45°45°35°35°34°34°34°34°34°33°33°32°32°31°
74°73°73°72°72°71°71°71°74°71°68°66°66°65°64°63°62°61°61°60°60°59°59°59°59°59°59°59°59°61°60°60°60°60°59°59°58°57°56°55°55°53°48°48°48°48°48°48°48°48°47°45°44°43°42°42°41°40°40°39°39°38°
PERFORMANCE DATA
TFEMALE BODY
OR
TTMALE BODY
SCREEN STRAINER
SPRAY TIP(See Chart)
TIP RETAINER
CAPACITY(gallons per minute)
5psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
200psi
300psi
500psi
.35
.53
.711.11.41.82.12.5
.11
.14
.18
.21
.28
.35
.53
.711.11.41.82.12.5
.28
.35
.53
.711.11.41.82.12.5
.50
.751.01.52.02.53.03.5
.05
.07
.10
.15
.20
.25
.30
.40
.50
.751.01.52.02.53.03.5
.10
.15
.20
.25
.30
.40
.50
.751.01.52.02.53.03.5
.20
.25
.30
.711.11.42.12.83.54.24.9
.012
.018
.023
.035.05.07.11.14.21.28.35.42.56.711.11.42.12.83.54.24.9
.012
.018
.023
.035.05.07.11.14.21.28.35.42.56.711.11.42.12.83.54.24.9
.07
.11
.14
.21
.28
.35
.42
.861.31.72.63.54.35.26.1
.015
.022
.029
.043.06.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.1
.015
.022
.029
.043.06.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.1
.015
.022
.029
.043.06.09.13.17.26.35.43.52
1.01.52.03.04.05.06.07.0
.017
.025
.033
.050
.067.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.0
.017
.025
.033
.050
.067.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.0
.017
.025
.033
.050
.067.10.15.20.30.40.50.60
1.21.82.53.74.96.17.38.6
.021
.031
.040.06.08.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.6
.021
.031
.040.06.08.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.6
.021
.031
.040.06.08.12.18.25.37.49.61.73
1.42.12.84.25.77.18.59.9
.024
.035
.047.07.09.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9
.024
.035
.047.07.09.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9
.024
.035
.047.07.09.14.21.28.42.57.71.85
1.62.43.24.76.37.99.5
11.1.027.040.052.08.11.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.1.027.040.052.08.11.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.1.027.040.052.08.11.16.24.32.47.63.79.95
2.23.44.56.78.9
11.213.415.7.038.06.07.11.15.22.34.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7.038.06.07.11.15.22.34.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7.038.06.07.11.15.22.34.45.67.891.11.3
2.74.15.58.2
11.013.716.419.2.047.07.09.14.18.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2.047.07.09.14.18.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2.047.07.09.14.18.27.41.55.821.11.41.6
3.55.37.1
10.614.217.7
2125.06.09.12.18.24.35.53.711.11.41.82.12.83.55.37.1
10.614.217.7
2125.06.09.12.18.24.35.53.711.11.41.82.12.83.55.37.1
10.614.217.7
2125.06.09.12.18.24.35.53.711.11.41.82.1
6510 T\Á‰6515 E\´„6520 U\Á‰
65° 6530 O\Á‰6540 T\´„6550 QQ\Á‰6560 E\ŒÁ6570 QE\Á‰
500017 .011500025 .013500033 .015500050 .018500067 .0215001 .02650015 .0315002 .0365003 .043
50° 5004 .0525005 .0575006 .0625008 .0725010 T\Á‰5015 E\´„5020 U\Á‰5030 O\Á‰5040 T\´„5050 QQ\Á‰5060 E\ŒÁ5070 QE\Á‰
400017 .011400025 .013400033 .015400050 .018400067 .0214001 .02640015 .0314002 .0364003 .043
40° 4004 .0524005 .0574006 .0624008 .0724010 T\Á‰4015 E\´„4020 U\Á‰4030 O\Á‰4040 T\´„4050 QQ\Á‰4060 E\ŒÁ4070 QE\Á‰
250017 .011250025 .013250033 .015250050 .018250067 .021
25° 2501 .02625015 .0312502 .0362503 .0432504 .0522505 .0572506 .062
Equiv.OrificeDiam.Inches 20
psi40psi
80psi
200psi
Spray Angle at 40 psi
B19
UN
IJE
T S
YS
TE
MFL
AT S
PR
AY
FLAT SPRAY
0°SOLID STREAM
CapacitySize
SPRAYANGLE
Material Material Code
no material code = Brass
SS = 303 Stainless Steel
PERFORMANCE DATA
ORDERING INFORMATIONUNIJET
COMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + TP 11010 - SS
TipType
(Only usedwhen ordering
tip alone)
MaterialCode
CapacitySize
MESH SELECTIONGUIDE
Equivalent RecommendedOrifice Screen
Diameter Mesh
UP THROUGH.018" (.46 mm) 200
.019" (.47 mm)THROUGH 100
.031" (.79 mm)
.032" (.80 mm)AND LARGER 50
SPRAY NOZZLE TIP
17°18°18°19°20°21°21°22°22°
6°6°7°7°8°9°10°10°10°10°10°11°11°11°
25°25°25°25°25°25°25°25°25°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°15°
31°31°31°31°30°29°29°29°29°30°28°27°26°25°24°23°22°22°21°21°21°20°19°19°19°19°18°18°18°18°
38°37°37°37°36°35°35°35°35°37°34°32°30°29°28°27°27°27°26°26°26°25°24°24°23°21°21°21°21°21°
TFEMALE BODY
OR
TTMALE BODY
SCREEN STRAINER
SPRAY TIP(See Chart)
TIP RETAINER
CAPACITY(gallons per minute)
5psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
200psi
300psi
500psi
1.11.41.82.12.5
.003
.004
.007
.007
.018
.024
.035.05.07.10.14.18.21.28.35.53.711.11.4
.40
.50
.751.01.52.02.53.03.5
.751.01.52.02.53.03.5
.005
.006
.009.01
.025
.033.05.07.10.15.20.25.30.40.50.751.01.52.0
.56
.711.11.42.12.83.54.24.9
.14
.21
.28
.35
.42
.56
.711.11.42.12.83.54.24.9
.006
.008
.013
.015
.035.05.07.11.14.21.28.35.42.56.711.11.42.12.8
.69
.861.31.72.63.54.35.26.1
.015
.022
.029
.043.06.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.1
.008.01
.016
.018
.043.06.09.13.17.26.35.43.52.69.861.31.72.63.5
.801.01.52.03.04.05.06.07.0
017.025.033.050.067.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.0
.009
.012
.019
.021
.050
.067.10.15.20.30.40.50.60.801.01.52.03.04.0
.981.21.82.53.74.96.17.38.6
.021
.031
.040.06.08.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.6
.011
.015
.023
.026.06.08.12.18.25.37.49.61.73.981.21.82.53.74.9
1.11.42.12.84.25.77.18.59.9
.024
.035
.047.07.09.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9
.013
.017
.027.03.07.09.14.21.28.42.57.71.851.11.42.12.84.25.7
1.31.62.43.24.76.37.99.5
11.1.027.040.052.08.11.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.1.014.019.03
.033.08.11.16.24.32.47.63.79.951.31.62.43.24.76.3
1.82.23.44.56.78.9
11.213.415.7.038.06.07.11.15.22.34.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7.020.027.043.047.11.15.22.34.45.67.891.11.31.82.23.44.56.79.0
2.22.74.15.58.2
11.013.716.419.2.047.07.09.14.18.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2.025.033.052.058.14.18.27.41.55.821.11.41.62.22.74.15.58.2
11.0
2.83.55.37.1
10.614.217.7
2125
.06
.09
.12
.18
.24
.35
.53
.711.11.41.82.12.83.55.37.1
10.614.217.7
2125
.032
.042
.067
.074.18.24.35.53.711.11.41.82.12.83.55.37.1
10.614.2
2508 .0722510 T\Á‰2515 E\´„2520 U\Á‰
25° 2530 O\Á‰2540 T\´„2550 QQ\Á‰2560 E\ŒÁ2570 QE\Á‰
150017 .011150025 .013150033 .015150050 .018150067 .0211501 .02615015 .0311502 .0361503 .043
15° 1504 .0521505 .0571506 .0621508 .0721510 T\Á‰1515 E\´„1520 U\Á‰1530 O\Á‰1540 T\´„1550 QQ\Á‰1560 E\ŒÁ1570 QE\Á‰
000009 .008000012 .010000019 .012000021 .0135000050 .020000067 .0230001 .02800015 .0330002 .039
0° 0003 .0470004 .0550005 .0610006 .0670008 .0780010 .0860015 .1070020 .1250030 O\Á‰0040 T\´„
Equiv.OrificeDiam.Inches
20psi
40psi
80psi
200psi
SprayAngle
at 40 psi
B20
UN
IJE
T S
YS
TE
MFL
AT S
PR
AY
WIDE ANGLE FLAT SPRAY (FOR LIQUID, AIR AND STEAM)
TKFloodJet® Wide Angle
Flat Spray TipTK FloodJet spray tips feature a wide angle flat spray patternwith medium impact. Theyproduce uniform spray distribu-tion of medium-sized droplets.A round orifice and largeunobstructed flow passagesminimize clogging problems.Precision-machined deflectorprovides accurate control ofspray angle. TK spray tips arecompatible with standard UniJetnozzle bodies.
CapacitySize
SPRAYANGLE
Material Material Code
no material code = Brass
SS = 303 Stainless Steel
CapacitySize
ⓦ Spraying eliminator plates
ⓦ Cooling conveyor belts
ⓦ Film washing
ⓦ Water curtain
ⓦ Spray cooling
ⓦ Fire protection
73°83°98°86°97°
114°101°115°98°
106°110°100°111°
89°106°109°108°113°122°112°123°128°119°133°113°120°122°110°126°
122°125°128°125°129°133°126°132°142°134°145°123°131°133°121°136°
MESH SELECTIONGUIDE
Equivalent RecommendedOrifice Screen
Diameter Mesh
UP THROUGH.018" (.46 mm) 200
.019" (.47 mm)THROUGH 100
.031" (.79 mm)
.032" (.80 mm)AND LARGER 50
SPRAY NOZZLE TIP
UNIJETCOMPLETE NOZZLE
SPRAY TIP
+ TK - SS .50Tip
TypeCapacity
SizeMaterial
Code
NOZZLEBODY
TFEMALE BODY
OR
TTMALE BODY
SCREEN STRAINER
SPRAY TIP(See Chart)
TIP RETAINER
DESIGN FEATURES
AIR AND STEAM
LIQUID DATA
DIMENSIONS & WEIGHTSORDERING INFORMATION
COMMON APPLICATIONS
CAPACITY(gallons per minute)
3psi
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
.27
.41
.55
.82
.991.11.62.2
.18
.21
.28
.35
.53
.711.11.31.42.12.8
.12
.17
.21
.25
.33
.42
.63
.841.31.51.72.53.3
.075.10.15.20.25.30.40.50.751.01.51.82.03.04.0
.06
.09
.12
.18
.24
.31
.37
.49
.61
.921.21.82.22.43.74.9
.07
.11
.14
.21
.28
.35
.42
.57
.711.11.42.12.52.84.25.7
.08
.13
.17
.26
.35
.43
.52
.69
.871.31.72.63.13.55.16.9
.10
.15
.20
.30
.40
.50
.60
.801.01.52.03.03.64.06.08.0
.12
.18
.24
.37
.49
.61
.73
.981.21.82.53.74.44.97.39.8
.50 .024
.75 .0281 .033
1.5 .0412 .046
2.5 .0523 .0574 .0655 .073
7.5 .09110 .10415 .12918 .14120 .14830 .18040 .209
OrificeDiam.Nom.Inches 7
psi20psi
60psi
2"2Q\„"3"
3Q\„"4"4"5"5"6"6"7"7"
8Q\„"8Q\„"
5"5Q\„"6"
6Q\„"7Q\„"7Q\„"8"9"
10Q\„"10Q\„"11"12"
14Q\„"15Q\„"
CAPACITY—in scfm(standard cubic feet
per minute)
CAPACITY—for STEAM
(pounds per hour)
10psi
20psi
40psi
50psi
10psi
20psi
40psi
50psi
.50 .024
.75 .0281 .033
1.5 .0412 .046
2.5 .0523 .0574 .0655 .073
7.5 .09110 .10415 .12920 .14830 .180
OrificeDiam.Nom.Inches
COVERAGEat 6"
Distancefrom Nozzle
10psi
50psi
.16
.22
.34
.54
.68
.941.11.41.92.83.96.47.9
11.4
.22
.31
.48
.75
.951.31.62.02.64.05.59.0
11.216.0
.35
.50
.751.21.52.12.53.04.26.38.6
14.317.725.4
.41
.59
.891.41.82.53.03.84.97.5
10.216.820.930.0
.35
.50
.761.21.52.12.53.14.26.48.7
14.317.725.5
.49
.701.11.72.12.93.64.55.98.9
12.220.225.035.7
.781.11.72.73.44.75.76.89.3
14.219.331.939.556.9
.921.32.03.24.05.66.78.6
11.016.822.937.746.767.2
Nozzle Max. Max.Type Length Hex Weight
1/4T + TK 1QT\ŒÁ" QE\ŒÁ" 2Q\„ oz.
1/4TT + TK 2" QE\ŒÁ" 2Q\‰ oz.
B21
UN
IJE
T S
YS
TE
MFL
AT S
PR
AY
HIGH PRESSURE WASHING 300 TO 3000* PSI (20 TO 207* BAR)
EGWashJet®
Flat Spray TipHardened Stainless Steel
EG WashJet spray tips producea uniform spray distribution ofmedium-sized droplets. Thespray tip orifice is precision-machined to accurately controlflow rates. Milled flats on thespray tip are parallel to the planeof the spray pattern, providing aquick visual reference
for spray alignment. The orificeis also recessed to protectagainst damage. EG spray tipsare designed to be used withhigh pressure 11430 UniJetnozzle bodies. These highpressure WashJet spray tipsfeature a high impact solidstream or a flat spray patternwith spray angles of 0¡ to 65¡.
ⓦ 015ⓦ 02ⓦ ⓦ ⓦ 03ⓦ ⓦ ⓦ ⓦ ⓦ 04ⓦ ⓦ ⓦ ⓦ 045ⓦ ⓦ ⓦ ⓦ 05ⓦ ⓦ ⓦ ⓦ 055ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 06ⓦ ⓦ 065ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ 07ⓦ ⓦ ⓦ ⓦ ⓦ 08ⓦ ⓦ ⓦ ⓦ ⓦ 09ⓦ ⓦ ⓦ ⓦ ⓦ 10ⓦ 12ⓦ ⓦ ⓦ 13ⓦ ⓦ ⓦ 15
WASHJET SPRAY TIPS
00°(Solid
Stream)15° 25° 40° 50° 65°
CapacitySize
HIGH PRESSUREUNIJET FEMALE BODY
GASKET
SCREEN STRAINER
TIP GASKET
SPRAY TIP(See Chart)
HIGH PRESSURETIP RETAINER
ⓦ High pressure washing ofequipment, machinery, vehicles,boats, tanks, etc.
MESH SELECTIONGUIDE
Equivalent RecommendedOrifice Screen
Diameter Mesh
UP THROUGH.018" (.46 mm) 200
.019" (.47 mm)THROUGH 100
.031" (.79 mm)
.032" (.80 mm)AND LARGER 50
SPRAY NOZZLE TIP
*For applications at higher pressures consult factory for recommendations and performance data.
DESIGN FEATURES
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
ORDERING INFORMATION
COMMON APPLICATIONS
To order Body Cap, Strainer withGaskets without a Spray Tip specify:
11430-1/4 - SS 100NozzleBody
MaterialCode
StrainerScreenMeshSize
Spray Tip to be ordered separatelyspecify Tip No.: TP1504EG
ConnectionSize
1.31.72.63.53.94.34.85.25.66.16.97.88.7
10.411.313.0
CAPACITY(gallons per minute)
300psi
400psi
500psi
600psi
700psi
800psi
1000psi
1500psi
2000psi
2500psi
.41
.55
.821.11.21.41.51.61.81.92.22.52.73.33.64.1
.47
.63
.951.31.41.61.71.92.12.22.52.93.23.84.14.7
.53
.711.11.41.61.81.92.12.32.52.83.23.54.24.65.3
.58
.771.21.61.71.92.12.32.52.73.13.53.94.65.05.8
.63
.841.31.71.92.12.32.52.72.93.43.84.25.05.46.3
.67
.891.41.82.02.22.52.72.93.13.64.04.55.45.86.7
.751.01.52.02.32.52.83.03.33.54.04.55.06.06.57.5
.921.21.82.52.83.13.43.74.04.34.95.56.17.38.09.2
1.11.42.12.83.23.53.94.24.64.95.76.47.18.59.2
10.6
1.21.62.43.23.64.04.34.75.15.56.37.17.99.5
10.311.9
Spray Angle at 40 psi
3000psi
Nozzle Max. Max.Type Length Hex Weight
11430-1/4 + EG 2Q\´„" QE\ŒÁ" 2.5 oz.
HIGH PRESSURE UNIJETNOZZLE BODY NO. 11430
TO BE USED WITHTYPE “EG” HIGH PRESSURE
FLAT SPRAY TIP
B22
UN
IJE
T S
YS
TE
MFL
AT S
PR
AY
HIGH PRESSURE COATING (TUNGSTEN CARBIDE)
TCTungsten carbide orifice
UniJet flat spray tip
TC tungsten carbide UniJet flatspray tips are designed for highpressure applications, and provideexceptional wear resistance.They require nozzle assemblyno. 11430.
Tip OrderNo.
Tip OrderNo.
MESH SELECTIONGUIDE
Equivalent RecommendedOrifice Screen
Diameter Mesh
UP THROUGH.018" (.46 mm) 200
.019" (.47 mm)THROUGH 100
.031" (.79 mm)
.032" (.80 mm)AND LARGER 50
PERFORMANCE DATA
DESIGN FEATURES
DIMENSIONS & WEIGHTS ORDERING INFORMATIONTo order Body Cap, Strainer withGaskets without a Spray Tip specify:
11430-1/4 - SS 100NozzleBody
MaterialCode
StrainerScreenMeshSize
Spray Tip to be ordered separatelyspecify Tip No.: TP1100025-TC
ConnectionSize
SPRAY NOZZLE TIP
UniJet TC tips feature a largetungsten carbide orifice insert formaximum erosion resistance.The tip orifice insert is recessedin a solid stainless steel tip bodyto protect against damage.
TC tips provide a high impact flatspray pattern with spray angles of5¡ to 110¡.They produce a uniformspray distribution of small-sizeddroplets.The spray pattern edgesare feathered for even coveragewhen overlapping spray passes.
Milled flats on the UniJet TC tipsare parallel to the plane of thespray pattern, providing a quickvisual reference for sprayalignment.
HIGH PRESSURE UNIJETNOZZLE BODY NO. 11430
TO BE USED WITHTYPE “TC” HIGH PRESSURE
FLAT SPRAY TIP
HIGH PRESSUREUNIJET FEMALE BODY
GASKET
SCREEN STRAINER
TIP GASKET
SPRAY TIP(See Chart)
HIGH PRESSURETIP RETAINER
1100025-TC .013 .09 .12 .15 .18 16Q\„"1100033-TC .015 .12 .16 .20 .23 17"1100039-TC .016 .14 .20 .24 .28 18"1100050-TC .018 .18 .25 .30 .36 19"1100067-TC .021 .24 .33 .41 .47 21"1100080-TC .023 .28 .40 .49 .57 22"11001-TC .026 .35 .50 .61 .72 23"110015-TC .031 .53 .75 .91 1.1 25"11002-TC .036 .71 1.0 1.2 1.4 26"11003-TC .043 1.1 1.5 1.8 2.1 27"11004-TC .052 1.4 2.0 2.5 2.8 28"11005-TC .057 1.8 2.5 3.1 3.5 28"11006-TC .062 2.1 3.0 3.7 4.2 28"11007-TC .067 2.5 3.5 4.3 5.0 28"11008-TC .072 2.8 4.0 4.9 5.7 28"11009-TC .076 3.2 4.5 5.5 6.4 28"11010-TC .078 3.5 5.0 6.1 7.1 28"11012-TC .089 4.3 6.0 7.4 8.5 28"
950017-TC .011 .06 .08 .10 .12 13"950025-TC .013 .09 .12 .15 .18 14"950033-TC .015 .12 .16 .20 .23 15"950039-TC .016 .14 .20 .24 .28 16"950050-TC .018 .18 .25 .30 .36 17"950067-TC .021 .24 .33 .41 .47 19"950080-TC .023 .28 .40 .49 .57 19"9501-TC .026 .35 .50 .61 .72 21"95015-TC .031 .53 .75 .91 1.1 21"9502-TC .036 .71 1.0 1.2 1.4 22"9503-TC .043 1.1 1.5 1.8 2.1 22"9504-TC .052 1.4 2.0 2.5 2.8 23"9505-TC .057 1.8 2.5 3.1 3.5 23"9506-TC .062 2.1 3.0 3.7 4.2 23"
CAPACITY*(gallons per minute)
500psi
1000psi
1500psi
2000psi
Equiv-alent
OrificeDiam. Inches
Approx.**Spray
PatternWidth
(at 1 footdistance)
9507-TC .067 2.5 3.5 4.3 5.0 23"9508-TC .072 2.8 4.0 4.9 5.7 23"9509-TC .076 3.2 4.5 5.5 6.4 23"9510-TC .078 3.5 5.0 6.1 7.1 23"9511-TC .085 3.9 5.5 6.7 7.8 23"9512-TC .089 4.3 6.0 7.4 8.5 23"9515-TC .099 5.3 7.5 9.2 10.6 23"
800011-TC .009 .039 .055 .067 .078 10Q\„"800017-TC .011 .06 .08 .10 .12 11Q\„"800025-TC .013 .09 .12 .15 .18 12Q\„"800033-TC .015 .12 .16 .20 .23 13"800039-TC .016 .14 .20 .24 .28 14"800050-TC .018 .18 .25 .30 .36 15"800067-TC .021 .24 .33 .41 .47 17"800080-TC .023 .28 .40 .49 .57 17"8001-TC .026 .35 .50 .61 .72 19"80015-TC .031 .53 .75 .91 1.1 19"8002-TC .036 .71 1.0 1.2 1.4 19"8003-TC .043 1.1 1.5 1.8 2.1 19"8004-TC .052 1.4 2.0 2.5 2.8 19"8005-TC .057 1.8 2.5 3.1 3.5 19"8006-TC .062 2.1 3.0 3.7 4.2 19"8007-TC .067 2.5 3.5 4.3 5.0 19"8008-TC .072 2.8 4.0 4.9 5.7 19"8009-TC .076 3.2 4.5 5.5 6.4 19"8010-TC .078 3.5 5.0 6.1 7.1 19"8011-TC .085 3.9 5.5 6.7 7.8 19"8012-TC .089 4.3 6.0 7.4 8.5 19"8013-TC .093 4.6 6.5 8.0 9.2 19"8014-TC .096 4.9 7.0 8.6 9.9 19"8015-TC .099 5.3 7.5 9.2 10.6 19"
730023-TC .012 .08 .11 .14 .16 11Q\„"730039-TC .016 .14 .20 .24 .28 13"
CAPACITY*(gallons per minute)
500psi
1000psi
1500psi
2000psi
Equiv-alent
OrificeDiam. Inches
Approx.**Spray
PatternWidth
(at 1 footdistance)
Nozzle Max. Max.Type Length Hex Weight
11430 - Q\‰ + TC 2Q\´„" QE\ŒÁ" 2.5 oz.
B23
UN
IJE
T S
YS
TE
MFL
AT S
PR
AY
TC SPRAY TIPS (CONT.)
PERFORMANCE DATA
Tip OrderNo.
Tip OrderNo.
SPRAY NOZZLE TIP
* Tabulated capacities based on water.
** SPRAY PATTERN DIAMETER IS BASED ON LIQUID WITHVISCOSITY of 20 seconds #4 Zahn Cup…spraying at 1,600 psi(110 bar). Coverages will vary with viscosities and pressures.
HIGH PRESSURE UNIJETNOZZLE BODY NO. 11430
TO BE USED WITHTYPE “TC” HIGH PRESSURE
FLAT SPRAY TIP
HIGH PRESSUREUNIJET FEMALE BODY
GASKET
SCREEN STRAINER
TIP GASKET
SPRAY TIP(See Chart)
HIGH PRESSURETIP RETAINER
650008-TC .007 .028 .04 .049 .057 8Q\„"650011-TC .009 .039 .055 .067 .078 9Q\‰"650017-TC .011 .06 .08 .10 .12 10"650025-TC .013 .09 .12 .15 .18 10Q\„"650033-TC .015 .12 .16 .20 .23 11"650039-TC .016 .14 .20 .24 .28 12"650044-TC .017 .16 .22 .27 .31 12Q\„"650050-TC .018 .18 .25 .30 .36 13"650055-TC .019 .19 .28 .34 .39 13"650067-TC .021 .24 .33 .41 .47 15"650080-TC .023 .28 .40 .49 .57 15"6501-TC .026 .35 .50 .61 .72 16"65015-TC .031 .53 .75 .91 1.1 16"6502-TC .036 .71 1.0 1.2 1.4 16"6503-TC .043 1.1 1.5 1.8 2.1 16"6504-TC .052 1.4 2.0 2.5 2.8 16"6505-TC .057 1.8 2.5 3.1 3.5 16"6506-TC .062 2.1 3.0 3.7 4.2 16"6507-TC .067 2.5 3.5 4.3 5.0 16"6508-TC .072 2.8 4.0 4.9 5.7 16"6509-TC .076 3.2 4.5 5.5 6.4 16"6510-TC .078 3.5 5.0 6.1 7.1 16"6511-TC .085 3.9 5.5 6.7 7.8 16"6512-TC .089 4.3 6.0 7.4 8.5 16"6513-TC .093 4.6 6.5 8.0 9.2 16"6514-TC .096 4.9 7.0 8.6 9.9 16"6515-TC .099 5.3 7.5 9.2 10.6 16"
500008-TC .007 .028 .04 .049 .057 7E\‰"500011-TC .009 .039 .055 .067 .078 8"500017-TC .011 .06 .08 .10 .12 8Q\„"500025-TC .013 .09 .12 .15 .18 9"500033-TC .015 .12 .16 .20 .23 10"500039-TC .016 .14 .20 .24 .28 10Q\„"500044-TC .017 .16 .22 .27 .31 10Q\„"500050-TC .018 .18 .25 .30 .36 11"500055-TC .019 .19 .28 .34 .39 11"500067-TC .021 .24 .33 .41 .47 12"500080-TC .023 .28 .40 .49 .57 13"5001-TC .026 .35 .50 .61 .72 14"50015-TC .031 .53 .75 .91 1.1 14"5002-TC .036 .71 1.0 1.2 1.4 14"5003-TC .043 1.1 1.5 1.8 2.1 14"5004-TC .052 1.4 2.0 2.5 2.8 14"5005-TC .057 1.8 2.5 3.1 3.5 14"5006-TC .062 2.1 3.0 3.7 4.2 14"5007-TC .067 2.5 3.5 4.3 5.0 14"5008-TC .072 2.8 4.0 4.9 5.7 14"5010-TC .078 3.5 5.0 6.1 7.1 14"5015-TC .099 5.3 7.5 9.2 10.6 14"
400004-TC .005 .014 .020 .025 .028 6Q\„"400006-TC .006 .021 .030 .037 .042 6Q\„"400008-TC .007 .028 .040 .049 .057 6Q\„"400011-TC .009 .039 .055 .067 .078 7"400017-TC .011 .06 .08 .10 .12 7Q\„"400025-TC .013 .09 .12 .15 .18 8"400033-TC .015 .12 .16 .20 .23 8Q\„"400039-TC .016 .14 .20 .24 .28 9"400044-TC .017 .16 .22 .27 .31 9Q\„"400050-TC .018 .18 .25 .30 .36 10"400055-TC .019 .19 .28 .34 .39 10"400067-TC .021 .24 .33 .41 .47 11"400080-TC .023 .28 .40 .49 .57 11"4001-TC .026 .35 .50 .61 .72 12"40013-TC .029 .46 .65 .80 .92 12"40015-TC .031 .53 .75 .91 1.1 12"4002-TC .036 .71 1.0 1.2 1.4 12"4003-TC .043 1.1 1.5 1.8 2.1 12"4004-TC .052 1.4 2.0 2.5 2.8 12"4005-TC .057 1.8 2.5 3.1 3.5 12"4006-TC .062 2.1 3.0 3.7 4.2 12"4007-TC .067 2.5 3.5 4.3 5.0 12"4008-TC .072 2.8 4.0 4.9 5.7 12"4009-TC .076 3.2 4.5 5.5 6.4 12"4015-TC .099 5.3 7.5 9.2 10.6 12"
CAPACITY*(gallons per minute)
500psi
1000psi
1500psi
2000psi
Equiv-alent
OrificeDiam. Inches
Approx.**Spray
PatternWidth
(at 1 footdistance)
250004-TC .005 .014 .020 .025 .028 5"250006-TC .006 .021 .030 .037 .042 5"250008-TC .007 .028 .040 .049 .057 5Q\„"250011-TC .009 .039 .055 .067 .078 5Q\„"250017-TC .011 .06 .08 .10 .12 6"250025-TC .013 .09 .12 .15 .18 6"250033-TC .015 .12 .16 .20 .23 7"250039-TC .016 .14 .20 .24 .28 7"250050-TC .018 .18 .25 .30 .36 7"250055-TC .019 .19 .28 .34 .39 7"250067-TC .021 .24 .33 .41 .47 8"250080-TC .023 .28 .40 .49 .57 8Q\„"2501-TC .026 .35 .50 .61 .72 9"25015-TC .031 .53 .75 .91 1.1 9"2502-TC .036 .71 1.0 1.2 1.4 9"2503-TC .043 1.1 1.5 1.8 2.1 9"2504-TC .052 1.4 2.0 2.5 2.8 9"2506-TC .062 2.1 3.0 3.7 4.2 9"2508-TC .072 2.8 4.0 4.9 5.7 9"
150004-TC .005 .014 .020 .025 .028 4"150006-TC .006 .021 .030 .037 .042 4"150008-TC .007 .028 .040 .049 .057 4Q\„"150011-TC .009 .039 .055 .067 .078 4Q\„"150017-TC .011 .06 .08 .10 .12 5"150025-TC .013 .09 .12 .15 .18 5"150033-TC .015 .12 .16 .20 .23 5Q\„"150039-TC .016 .14 .20 .24 .28 6"150044-TC .017 .16 .22 .27 .31 6"150050-TC .018 .18 .25 .30 .36 6"150067-TC .021 .24 .33 .41 .47 6Q\„"150080-TC .023 .28 .40 .49 .57 7"1501-TC .026 .35 .50 .61 .72 7"15015-TC .031 .53 .75 .91 1.1 7"1502-TC .036 .71 1.0 1.2 1.4 7"1503-TC .043 1.1 1.5 1.8 2.1 7"1504-TC .052 1.4 2.0 2.5 2.8 7"1505-TC .057 1.8 2.5 3.1 3.5 7"1506-TC .062 2.1 3.0 3.7 4.2 7"1508-TC .072 2.8 4.0 4.9 5.7 7"
100004-TC .005 .014 .020 .025 .028 3"100008-TC .007 .028 .040 .049 .057 3Q\„"100011-TC .009 .039 .055 .067 .078 3Q\„"100017-TC .011 .06 .08 .10 .12 4"100025-TC .013 .09 .12 .15 .18 4"100033-TC .015 .12 .16 .20 .23 4Q\„"100039-TC .016 .14 .20 .24 .28 5"100050-TC .018 .18 .25 .30 .36 5"100067-TC .021 .24 .33 .41 .47 5Q\„"100080-TC .023 .28 .40 .49 .57 5Q\„"1001-TC .026 .35 .50 .61 .72 6"10015-TC .031 .53 .75 .91 1.1 6"1002-TC .036 .71 1.0 1.2 1.4 6"
050004-TC .005 .014 .020 .025 .028 2Q\„"050008-TC .007 .028 .040 .049 .057 2Q\„"050011-TC .009 .039 .055 .067 .078 2Q\„"050017-TC .011 .06 .08 .10 .12 3"050025-TC .013 .09 .12 .15 .18 3"050033-TC .015 .12 .16 .20 .23 3Q\„"050039-TC .016 .14 .20 .24 .28 4"050050-TC .018 .18 .25 .30 .36 4"050067-TC .021 .24 .33 .41 .47 4"0501-TC .026 .35 .50 .61 .72 4"05015-TC .031 .53 .75 .91 1.1 4"0502-TC .036 .71 1.0 1.2 1.4 4"
CAPACITY*(gallons per minute)
500psi
1000psi
1500psi
2000psi
Equiv-alent
OrificeDiam. Inches
Approx.**Spray
PatternWidth
(at 1 footdistance)
B24
UN
IJE
T S
YS
TE
MH
OLL
OW
CO
NE
FINE SPRAY (HOLLOW CONE) STANDARD & HIGH PRESSURE
TNfine/hollow coneUniJet spray tip
TNSSTChigh pressure
tungsten carbide orificeUniJet spray tip
TFEMALE BODY
OR
TTMALE BODY
SCREEN STRAINER
SPRAY TIP(See Chart)
TIP RETAINER
HIGH PRESSUREUNIJET FEMALE BODY
GASKET
SCREEN STRAINER
TIP GASKET
SPRAY TIP(See Chart)
HIGH PRESSURETIP RETAINER
TN series UniJet spray tips havea core, body and orifice insertand are applicable with theUniJet nozzle system. The spraytips produce very finely atomizeddroplets in a hollow cone spray
pattern with uniform distribution,often achieving misting perfor-mance. All parts are precision-machined. Orifice inserts, cores,and strainers are easily removedfor cleaning.
ⓦ Evaporative cooling
ⓦ Moistening
ⓦ Humidifying
ⓦ Misting
ⓦ Gas cooling
UniJetSpray
TipType TN
Cone SprayTNSSTC Tip
No.
CoreNo.
SPRAY ANGLE
45°65°70°65°72°73°85°82°78°85°81°70°73°
35°62°70°75°70°81°79°89°84°82°88°84°72°74°
65°72°72°77°73°84°81°91°86°85°90°86°75°77°
SPRAY NOZZLE TIPS
* Tabulated capacities based on water.
** SPRAY PATTERN DIAMETER IS BASED ON LIQUID VISCOSITY of 20 seconds #4 Zahn Cup…spraying at 1,600 psi (110 bar). Coverages will vary with viscosities and pressures.
UNIJETCOMPLETE NOZZLE
SPRAY TIPNOZZLEBODY + TN - SS 10
TipType
CapacitySize
MaterialCode
PERFORMANCE DATA
DESIGN FEATURES
ORDERING INFORMATION
COMMON APPLICATIONS
TNSSTC .80 .0135TNSSTC .90 .016TNSSTC 1 .020TNSSTC 1.5 .020TNSSTC 2 .028TNSSTC 3 .028TNSSTC 4 .042TNSSTC 6 .042TNSSTC 8 .060TNSSTC 9 .060TNSSTC 10 .064TNSSTC 12 .076TNSSTC 14 .076TNSSTC 15 .081TNSSTC 16 .086TNSSTC 18 .076TNSSTC 20 .081TNSSTC 22 .076TNSSTC 24 .081TNSSTC 26 .086
OrificeDiameterInches
Approx.**Spray
PatternDiameter(at 1 footdistance)
3"3"
3Q\„"3Q\„"4Q\„"6"8"
10"12"14"16"18"14"16"18"16"18"12"13"14"
CAPACITY*— (gallons per minute)at various pressures
400psi
750psi
1000psi
1500psi
2000psi
.042
.047
.053.08.11.16.21.32.42.47.53.63.74.79.84.951.11.21.31.4
.058
.065
.072.11.14.22.29.43.58.65.72.871.01.11.21.31.41.61.71.9
.067
.075
.083.13.17.25.33.50.67.75.831.01.2
1.251.331.51.71.82.02.2
.082
.092.10.15.21.31.41.61.82.921.01.21.41.51.61.82.12.32.52.7
.095
.107.12.18.24.35.47.71.941.11.21.41.61.71.92.12.42.62.83.1
TN.60 .016 206TN1 .020 210TN1.5 .020 216TN2 .028 216TN3 .028 220TN4 .042 220TN6 .042 225TN8 .060 225TN10 .064 420TN12 .076 420TN14 .076 421TN18 .076 422TN22 .076 625TN26 .086 625
OrificeDiam.Nom.Inches
CAPACITY (gallons per hour)
30psi
40psi
60psi
100psi
200psi
300psi
500psi
700psi
1000psi
1.31.72.63.55.26.98.6
10.412.115.619.1
23
1.01.52.03.04.06.08.0
10.012.014.018.0
2226
1.21.82.53.74.97.39.8
12.214.717.1
222732
.951.62.43.24.76.39.5
12.615.819.0
22293541
1.32.23.44.56.79.0
13.417.9
222731404958
1.62.74.15.58.2
11.016.5
22273338496071
2.13.55.37.1
10.614.2
2128354350647892
2.54.26.38.4
12.516.7
25344250597592
109
3.05.07.5
10.015.0
20304050607090
110130
40psi
80psi
300psi
HV-8 –0008TC .007"
HV-10 –0011TC .009"
HV-12 –0017TC .011"
HV-14 –0025TC .013"
HV-16 –0033TC .015"
HV-19 –0050TC .018"
HV-22 –0067TC .021"
HV-27 –01TC .026"
HV ORIFICES
B25
UN
IJE
T S
YS
TE
M
SPRAY NOZZLES
11430high pressure UniJet nozzle
1⁄4" NPT or BSPT (F)for UniJet TC
spray nozzle tips
23825seal coating nozzle
This abrasive-resistant UniJetspray nozzle with ceramic tipinsert is widely used for sealcoating of parking lots, drivewaysand highways.The body and capare constructed of brass, with aceramic tip insert. A Buna-Ngasket provides a tight seal.
The tip produces an 80¡ sprayangle.Three nozzle capacitiesare available: 5, 7, or 10 gpm at40 psi (19.7, 28, or 39 l/min at 3 bar) with !\›", #\°" and !\¤" NPTor BSPT (M) connections.Writefor Data Sheet 23825.
UNIJET COMPLETE NOZZLE
23825 - * - CER8050Pipe
Conn.Nozzle
Capacity Tip
Number
HIGH PRESSURE UNIJET NOZZLE BODY ASSEMBLY
11430-1/4-SS - 100Mesh
ScreenSize
UniJet blow-off nozzle assembliesoffer all the useful advantages of the UniJet system such asinterchangeable nozzle tips andcomponents.
Blow-off nozzles are speciallydesigned for use with air andsteam. They provide a uniformflat spray pattern.
UniJet blow-off nozzle assem-blies are compatible withstandard UniJet nozzle bodies.
For more information about differ-ent types of blow-off nozzles, seeWindJet¨ in Section F, page 13.
HVOrificeOrderNo.
Used With TC Tip
Tip No. TipType
StandardMaterials Material Code
no material code = BrassSS = 303 Stainless Steel
LPQRUV
EquivalentOrifice Dia.
mm
HV series orifices are useful inapplications requiring a fine finish.They provide a flat spray patternwith more complete feathering ofthe spray pattern edges.
HV orifices fit at the inlet ofUniJet TC tips.They feature atungsten carbide orifice insertmounted in a nylon orifice holder,which serves as a gasket.
The 11430 UniJet nozzle assem-bly is designed for use in highpressure applications up to 3000psi (200 bar).
The assembly includes a nozzlebody and a high pressure inter-nal strainer in a choice of meshscreen sizes.
The 11430 UniJet nozzle assem-bly is compatible with all UniJetTC flat spray tips and UniJetTNSSTC hollow cone spray tips.Write for Data Sheet 11430.
PERFORMANCE DATAORDERING INFORMATION
DIMENSIONS
DESIGN FEATURES DESIGN FEATURESDESIGN FEATURES DESIGN FEATURES
BLOW-OFF NOZZLES
ORDERING INFORMATION
ORDERING INFORMATION ORDERING INFORMATIONUNIJET
COMPLETE NOZZLE
NOZZLEBODY + L - SS
TipType
MaterialCode
To order Tip only add the Tip Prefix TB EX: TBL-SS
BLOW-OFF TIPS
Widthof SlotInches
.008
.013
.023
.045
.045
.091
10psi
25psi
50psi
100psi
.61.22.23.96.3
12.5
1.32.03.96.4
11.022.7
2.13.16.2
11.018.537.0
3.65.4
10.719.031.061.0
1.22.44.78.4
13.526.8
2.84.48.7
14.025.051.2
4.67.0
14.028.041.783.5
8.212.125.343.071.0140.0
10psi
25psi
50psi
100psi
10 psi
50 psi
10"5!\¤"8!\¤"6"
10!\¤"9"
16!\¤"10"13"9!\¤"
14!\¤"13!\¤"
CAPACITY—in scfm(standard cubic feet
per minute)
CAPACITY—for STEAM(pounds per hour)
COVERAGEat 6"
Distancefrom Nozzle
80° FOGGER SPRAYHOLLOW CONE TIP
SPRAY NOZZLES
brass tip body and corestainless steel core tipB
26
UN
IJE
T S
YS
TE
M
The Model 22624-80¡ FoggerSpray Tip produces a hollowcone misting type spray, withoutatomization.This type of spray isideal where wetting is needed
without excess moisture. It is afrequently used spray tip in themisting of vegetables to preservetheir freshness and storage life.The nozzle is available in twoorifice diameters .016" (0.41 mm)and .027" (0.69 mm).
22624
23945wide angle spray
1⁄4" NPT or BSPT (M)
SPECIFY
NOZZLEBODY + 22624 -*- 80°
Size SprayAngle
TipType
DESIGN FEATURESCOMMON APPLICATIONS
PERFORMANCE DATA
PERFORMANCE DATA
ORDERING INFORMATION
ORDERING INFORMATIONDESIGN FEATURES
COMMON APPLICATIONS SPECIFY
23945 -1/4TT- NYB - *BodyType
Material SizeModelNumber
ⓦ Misting
ⓦ Wetting
ⓦ Food processing/meat packing
ⓦ Cooling applications withoutmisting
LARGE DROPLETHOLLOW CONE NOZZLE
Spray TipNumber
22624-1-80°
22624-2-80°
Nozzle Number Tip NumberTip and StrainerSub-Assembly
Number
23945-1/4TT-NYB-2.8W
23945-1/4TT-NYB-4.3W
CP23950-2.8W-PP
CP23949-4.3W-PPB
23951-2.8W
23951-4.3W
The Model 23945 UniJet nozzleprovides a gentle spray of largedroplets in a wide angle hollowcone pattern with a thick annulus.It is available in two sizes, featur-
ing a nylon body, cap, andstrainer sub-assembly, and apolypropylene spray tip. Thenozzle is ideal for coolingapplications without misting.
TFEMALE BODY
OR
TTMALE BODY
SCREEN STRAINER
SPRAY TIP(See Chart)
TIP RETAINER
TTMALE BODY
SCREEN STRAINER
SPRAY TIP(See Chart)
TIP RETAINER
OrificeDiameter
Capacities in gph (water)and Spray Angle at pressure psi
20psi
30psi
40psi
60psi
80psi
100psi
.7155°1.442°
.8772°1.764°
1.080°2.080°
1.290°2.486°
1.494°2.888°
1.696°3.294°
.016"
.027"
Capacities in gpmand Spray Angle at pressure psi
15psi
20psi
25psi
30psi
40psi
50psi
60psi
.34156°.53
140°
.40152°.61
137°
.44147°.68
134°
.48146°.75
133°
.54143°.86
131°
.59141°.96
127°
.63139°1.05126°
General PurposeSpray nozzles
Csection
praying Systems Co. stocks a complete line of general purpose (threaded and flange type)
nozzles, offering many options for specific applications.
These options include: (1) spray patterns (hollowcone, full cone, flat spray, solid stream and finespray); (2) wide range of capacity sizes…1 gpm to8000 gpm (1 l/min to 32,500 l/min). All are availablein a wide variety of materials.
S
General PurposeSUB-SECTION INDEX
Hollow Cone Section(Page C1 - Page C18)
Full Cone Section(Page C19 - Page C38)
Flat Spray Section(Page C39 - Page C52)
Fine Spray Section(Page C53 - Page C56)
HOLLOW CONE
INDEXWhirlJet®
Small CapacityStandard Angle A, AX, B, BX................... C2, C3Wide Angle A-W, AX-W, B-W, BX-W....... C4Extra Wide Angle E ........................................... C5
Medium-LargeCapacity C, CX, D......................... C6, C7
Large Capacity CRC, CF................................ C8
9360 Polypropylene AP, LAP, LBP.................. C9-C11
In-Line Series BD........................................ C12
Miner Nozzles BDM.................................... C13
30¡ HollowJet® G, H..................................... C13
High PressureSprayDry® AA, BB, AAA, 104.......C14, C15
Offset Type BA........................................C16
DeflectoJet® 8686.....................................C16
SpiralJet®
Threaded Type BSJ...................................... C17
SpiralJet®
Flanged Type BFSJ................................... C18
SPRAY NOZZLES
C2
GE
NE
RA
L P
UR
PO
SE
HO
LLO
W C
ON
E
STANDARD ANGLESMALL CAPACITY
Aremovable cap
1⁄8"-3⁄4" NPT or BSPT (F)
Bremovable cap
1⁄8"-3⁄4" NPT or BSPT (M)
AXremovable cap/slope-
bottom design1⁄8"-3⁄4" NPT or BSPT (F)
BXremovable cap/slope-
bottom design1⁄8"-3⁄4" NPT or BSPT (M)
ⓦ Washing gas and air to remove fly ash and other products of combustion
ⓦ Gas cooling
ⓦ Water cooling
ⓦ Metal treating
ⓦ Product degreasing
ⓦ Suppression and control of fugitive dust
ⓦ Brine spraying
ⓦ Water aerating
Standard WhirlJet spray nozzlesfeature a hollow cone spraypattern with a ring-shapedimpact area and spray angles of40¡ to 90¡.
They produce a uniform distri-bution of small to medium-sizeddroplets over a wide range offlow rates and pressures.
WhirlJet nozzles produceexcellent results in applicationsrequiring good atomization ofliquids at lower pressuresÉespecially where quick heattransfer or effective air-bornedroplet impingement is required.
WhirlJets also provide animportant benefit with their large and unobstructed flowpassages, which minimize oreliminate clogging.
A and B series small capacityWhirlJet spray nozzles areprecision-machined from solidbar stock to exacting internalproportions. They haveremovable caps and the originaldesign WhirlJet whirlchamber.
AX and BX series small capacityslope bottom WhirlJets featurethe same uniform spray distri-bution and precision two-piecebar stock construction as the Aand B seriesÉplus the addedadvantage of the longer-lifeslope bottom designÉto reducethe Òdrilling effectÓ of the fluidvortex in the whirlchamber.
COMMON APPLICATIONS
ACCESSORIES
DESIGN FEATURES
SPRAY NOZZLES
ⓦ Pressure Regulators
ⓦ Control Valves
ⓦ Solenoid Valves
ⓦ Swivel Connectors
SEE SECTION G FORCOMPLETE INFORMATION.
DUST CONTROL
Split-Eyelet Connector Pressure Gauge Other AccessoriesAdjustableBall Fittings
124Strainer
C3
GE
NE
RA
L P
UR
PO
SE
HO
LLO
W C
ON
E
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
NozzleInlet
Conn.NPT orBSPT
1/8
1/4
3/8
1/2
3/4
CapacitySize
0.512358
1012358
101558
1015202530
15-30.125-30.150-50.150-50.3
2530405060405060708090
100110120
52°52°56°56°55°
51°63°61°63°63°64°62°64°64°63°63°63°40°40°40°72°63°67°72°74°77°70°72°74°76°78°81°83°85°87°
58°64°61°64°67°65°65°53°62°65°73°69°70°71°73°70°72°72°70°70°70°50°47°47°76°66°71°76°79°82°73°75°76°79°82°84°86°88°90°
69°76°69°77°76°70°72°67°71°78°79°73°74°72°79°74°75°74°74°74°74°54°51°50°78°71°75°78°82°86°74°77°79°83°84°84°86°88°90°
SPRAYANGLE
NOZZLE TYPESTANDARD
(F)Conn.
(M)Conn.
A AX B BX
Standard Materials Material Codeno material code = BrassI = Mild SteelSS = 303 Stainless Steel316SS = 316 Stainless SteelPVC = Polyvinyl Chloride
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
ORDERING INFORMATIONSTANDARD
SPRAY NOZZLE
1/4 A - SS 10NozzleType
MaterialCode
CapacitySize
InletConnectionPipe Size
Based on largest/heaviest version of each type.
Q Q Q QQ Q Q QQ Q Q QQ Q Q QQ Q
BodyInlet
Diam.Nom.Inches
Q\´„Q\ŒÁT\Á‰E\´„Q\ˆT\´„QQ\Á‰
Q\ŒÁT\Á‰E\´„O\Á‰T\´„E\ŒÁQT\Á‰
O\Á‰QQ\Á‰QE\Á‰QT\Á‰O\´„QO\Á‰WQ\Á‰
QT\Á‰QO\Á‰QQ\´„QQ\´„
E\ˆE\ˆE\ˆE\ˆE\ˆ
Q\„Q\„Q\„Q\„Q\„Q\„Q\„Q\„Q\„
OrificeDiam.Nom.Inches
E\Á‰Q\ŒÁT\Á‰E\´„Q\ˆT\´„QQ\Á‰
Q\ŒÁT\Á‰E\´„O\Á‰T\´„QQ\Á‰QE\Á‰
Q\ˆT\´„QQ\Á‰U\´„Q\‰QO\Á‰T\ŒÁ
T\ŒÁT\ŒÁE\ˆE\ˆ
Q\‰QO\Á‰WE\Á‰U\ŒÁEE\Á‰
T\ŒÁE\ˆU\ŒÁQ\„O\ŒÁEU\Á‰T\ˆRE\Á‰WE\´„
CAPACITY(gallons per minute)
3 psi
5 psi
10 psi
15 psi
20 psi
30 psi
40 psi
60 psi
80 psi
100 psi
.27
.44
.55
.27
.44
.55
.82
.27
.44
.55
.821.11.41.61.31.52.72.71.41.62.22.73.32.22.73.33.84.44.95.56.06.6
.14
.21
.35
.57
.71
.21
.35
.56
.711.1.35.56.721.11.41.82.11.62.03.53.51.82.12.83.54.32.83.54.35.05.76.47.17.88.5
.05
.10
.20
.30
.50
.801.0.10.20.30.50.801.01.5.50.801.01.52.02.53.02.32.85.05.02.53.04.05.06.04.05.06.07.08.09.0
10.011.012.0
.06
.12
.25
.37
.61
.981.2.12.25.37.61.981.21.8.61.981.21.82.43.13.72.83.46.16.13.13.74.96.17.34.96.17.38.59.8
11.012.213.514.7
.07
.14
.28
.42
.701.11.4.14.28.42.701.11.42.1.701.11.42.12.83.54.23.24.07.17.13.54.25.77.18.55.77.18.59.9
11.312.714.115.517.0
.09
.17
.35
.52
.861.41.7.17.35.52.861.41.72.6.861.41.72.63.54.35.24.04.88.78.74.35.26.98.5
10.46.98.5
10.412.113.815.617.319.021.0
.10
.20
.40
.601.01.62.0.20.40.601.01.62.03.01.01.62.03.04.05.06.04.65.6
10.010.05.06.08.0
10.012.08.0
10.012.014.016.018.020.022.024.0
.12
.24
.48
.731.22.02.5.24.48.731.22.02.53.71.22.02.43.74.96.17.35.66.9
12.312.36.17.39.8
12.314.79.8
12.314.717.119.622.025.027.029.0
.14
.28
.56
.851.42.32.8.28.56.851.42.32.84.21.42.32.84.25.67.18.56.58.0
14.214.27.18.5
11.314.217.011.314.217.019.823.025.028.031.034.0
.16
.31
.63
.951.62.53.2.31.63.951.62.53.24.71.62.53.14.76.37.99.57.38.9
15.815.87.99.5
12.615.819.012.615.819.022.025.029.032.035.038.0
7psi
20psi
80psi
A, AX A B C D L Net Weight oz.Q\ˆ A, AX QQ\ŒÁ" T\ˆ" QT\´„" WT\´„" 1" 1Q\„Q\‰ A, AX U\ˆ" E\‰" QU\´„" WO\´„" 1Q\‰" 2E\‰E\ˆ A, AX 1Q\´„" U\ˆ" QQ\ŒÁ" 1Q\ˆ" 1QT\´„" 4Q\‰Q\„ A, AX 1E\ˆ" 1Q\ˆ" WU\´„" 1QE\´„" 1QT\ŒÁ" 8E\‰E\‰ A, AX 1O\ŒÁ" 1Q\‰" QT\ŒÁ" 1O\ŒÁ" 2E\ŒÁ" 11E\ˆ A-30.1 EQ\´„" E\‰" E\‰" 1Q\ˆ" 1QQ\´„" 4E\ˆ A-50.1 EQ\´„" E\‰" WU\´„" 1U\´„" 1QQ\´„" 3E\‰E\ˆ A-50.3 EQ\´„" E\‰" QQ\ŒÁ" 1Q\ŒÁ" 1QQ\´„" 3E\‰
B, BX A B C D L Net Weight oz.Q\ˆ B, BX U\ˆ" T\ˆ" QT\´„" WT\´„" 1E\ŒÁ" 1Q\„Q\‰ B, BX 1" E\‰" QU\´„" WO\´„" 1E\ˆ" 2Q\„E\ˆ B, BX 1Q\ˆ" U\ˆ" QQ\ŒÁ" 1Q\ˆ" 1O\ŒÁ" 4Q\„ B, BX 1E\ˆ" 1Q\ˆ" WU\´„" 1QE\´„" 1QT\ŒÁ" 7E\‰ B, BX 1T\ˆ" 1Q\‰" QT\ŒÁ" 1O\ŒÁ" 2Q\‰" 10E\‰E\ˆ B-30.1 1Q\ˆ" E\‰" E\‰" 1Q\ˆ" 1Q\„" 3E\‰E\ˆ B-50.1 1Q\ˆ" E\‰" WU\´„" 1U\´„" 1Q\„" 3Q\„E\ˆ B-50.3 1Q\ˆ" E\‰" QQ\ŒÁ" 1Q\ŒÁ" 1Q\„" 3Q\„
INTERMEDIATE CAPACITIES—Caps are interchangeable forin-between capacities within each pipe size group... write forData Sheets 3055, 3986 and 3987.Spray Dimension Data... write for Data Sheets 15350 and 15362.
C4
GE
NE
RA
L P
UR
PO
SE
HO
LLO
W C
ON
E
WIDE ANGLESMALL CAPACITY
ⓦ Washing gas and air to remove fly ash and otherproducts of combustion
ⓦ Gas cooling
ⓦ Water cooling
ⓦ Metal treating
ⓦ Product degreasing
ⓦ Suppression and control of fugitive dust
ⓦ Brine spraying
ⓦ Water aerating
AIR AND GAS WASHING
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
NozzleInlet
Conn.NPT orBSPT
1/8
1/4
3/8
1/23/4
CapacitySize
0.5-0.5W1-1W2-3W3-3W3-5W
2-10W5-5W
5-10W8-10W1-1W1-5W
1-10W1-15W2-5W
2-10W5-5W
5-10W5-15W8-10W
10-10W8-15W
10-15W15-15W5-10W5-15W8-10W
10-10W8-15W
10-15W8-25W
10-20W15-15W15-20W20-20W15-30W25-25W25-30W50-50W80-80W
114°114°116°130°116°126°124°
118°138°114°130°130°129°120°129°120°101°130°138°122°116°133°126°122°118°116°113°106°116°105°105°110°115°
117°125°114°114°110°135°110°121°112°117°123°144°128°123°136°113°130°132°122°108°122°108°95°
123°131°110°108°120°115°118°112°106°108°102°110°100°101°102°107°
98°110°97°97°95°
120°92°95°90°
111°124°139°132°113°126°104°119°120°103°95°
107°97°88°
102°112°96°93°
105°100°109°102°95°98°95°
102°93°94°93°97°
SPRAYANGLE
NOZZLE TYPESTANDARD(F)
Conn.(M)
Conn.A AX B BX
Standard Materials Material Codeno material code = BrassI = Mild SteelSS = 303 Stainless Steel316SS = 316 Stainless SteelPVC = Polyvinyl Chloride
SPRAY NOZZLES
Small capacity Wide SprayWhirlJet spray nozzles feature a hollow cone spray pattern witha ring-shaped impact area andspray angles of 88¡ to 144¡.
They produce a uniform distribu-tion of small to medium-sized droplets and have large and unob-structed flow passages whichminimize or eliminate clogging.
A-W and B-W series Wide SprayWhirlJet spray nozzles areprecision-machined from solidbar stock to exacting internalproportions. They have remov-able caps and the originaldesign WhirlJet whirlchamber.
AX-W and BX-W series WideSpray WhirlJet spray nozzlesfeature the same accurateperformance as the A-W and B-W series, plus the addedadvantage of the longer-lifeslope bottom designÉto reducethe Òdrilling effectÓ of the fluidvortex in the whirlchamber.
COMMON APPLICATIONS
DESIGN FEATURES
PERFORMANCE DATA
ORDERING INFORMATION
1/4 A - SS 10-10WNozzleType
MaterialCode
CapacitySize
InletConnec-
tionPipe Size
Q Q Q QQ Q Q QQ Q Q QQ Q Q QQ Q
BodyInlet
Diam.Nom.Inches
Q\´„Q\ŒÁT\Á‰E\´„E\´„T\Á‰Q\ˆQ\ˆT\´„
Q\ŒÁQ\ŒÁQ\ŒÁQ\ŒÁT\Á‰T\Á‰O\Á‰O\Á‰O\Á‰T\´„E\ŒÁT\´„E\ŒÁQT\Á‰
O\Á‰O\Á‰QQ\Á‰QE\Á‰QQ\Á‰QE\Á‰QQ\Á‰QE\Á‰QT\Á‰QT\Á‰O\´„QT\Á‰QO\Á‰QO\Á‰
E\ˆ
Q\„
OrificeDiam.Nom.Inches
E\Á‰Q\ŒÁU\Á‰U\Á‰Q\ˆQQ\Á‰Q\ˆQQ\Á‰QQ\Á‰
Q\ŒÁQ\ˆQQ\Á‰U\´„Q\ˆQQ\Á‰Q\ˆQQ\Á‰U\´„QQ\Á‰QQ\Á‰U\´„U\´„U\´„
QQ\Á‰U\´„QQ\Á‰QQ\Á‰U\´„U\´„QO\Á‰QT\Á‰U\´„QT\Á‰QT\Á‰T\ŒÁQO\Á‰T\ŒÁ
U\ŒÁ
O\ŒÁ
CAPACITY(gallons per minute)
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
80psi
.46
.64
.46
.52
.64
.71
.78
.861.1.46.52.64.71.78.86.92.971.11.21.41.61.82.03.55.7
.21
.25
.29
.35
.42
.54
.75
.29
.35
.42
.54
.64
.75
.84
.921.01.3.54.64.75.84.921.01.11.11.31.51.71.82.12.34.26.7
.05
.10
.25
.30
.34
.41
.50
.65
.90
.10
.17
.21
.24
.34
.41
.50
.65
.77
.901.01.11.21.5.65.77.901.01.11.21.31.41.51.72.02.22.52.85.08.0
.06
.12
.31
.37
.42
.51
.61
.801.1.12.21.26.29.42.51.61.80.941.11.21.41.51.8.80.941.11.21.41.51.61.71.82.12.42.73.13.46.19.8
.07
.14
.35
.42
.48
.59
.71
.921.3.14.24.30.34.49.59.71.921.11.31.41.61.72.1.921.11.31.41.61.71.91.92.12.52.83.13.54.07.1
11.3
.09
.17
.43
.52
.59
.72
.861.11.6.17.29.36.42.60.72.861.11.31.61.71.92.12.61.11.31.61.71.92.12.32.42.63.03.53.84.34.98.6
13.8
.10
.20
.50
.60
.68
.821.01.31.8.20.34.42.48.68.821.01.31.51.82.02.22.43.01.31.51.82.02.22.42.62.73.03.54.04.45.05.6
10.016.0
.12
.25
.61
.73
.831.01.21.62.2.25.42.51.59.841.01.21.61.82.22.52.73.03.71.61.82.22.52.73.03.23.33.74.34.95.46.16.9
12.319.6
.14
.28
.71
.85
.961.21.41.82.5.28.48.60.68.891.21.41.82.22.52.83.13.44.21.82.22.52.83.13.43.73.94.24.95.66.27.17.9
14.223.0
10psi
20psi
80psi
C5
GE
NE
RA
L P
UR
PO
SE
HO
LLO
W C
ON
E
124 Strainer Control Valves
ⓦ Swivel Connectors
ⓦ Pressure Relief Valves
SEE SECTION G FORCOMPLETE INFORMATION.
Other Accessories
SPRAY NOZZLESEXTRA WIDE ANGLESMALL CAPACITY
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
DESIGN FEATURES
COMMON APPLICATIONS
ACCESSORIES ORDERING INFORMATION
1/4 E - SS 10NozzleType
MaterialCode
CapacitySize
InletConnec-
tionPipe Size
Eone-piece bar stock type1⁄8"-1⁄4" NPT or BSPT (F)
Eone-piece cast type
3⁄8"-1⁄2" NPT or BSPT (F)
ⓦ Moistening and wetting operations
ⓦ Chemical reaction processing
ⓦ Washing gas and air to remove fly ash and other products of combustion
ⓦ Gas cooling
ⓦ Water cooling
ⓦ Metal treating
ⓦ Product degreasing
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
NozzleInlet
Conn.NPT orBSPT
1/8
1/4
3/8
1/2
CapacitySize
2525
5.88
108
10152025335325304053
SPRAYANGLE
NOZZLE TYPE
E
Standard Materials Material Code
no material code = BrassSS = 303 Stainless Steel
CapacitySize
NozzleInlet
Conn.NPT orBSPT
Brass andStainless Steel
Bar Stock
Stainless SteelBar Stock
CastBrassType
Small capacity Extra Wide SprayWhirlJet spray nozzles feature ahollow cone spray pattern with aring-shaped impact area andspray angles of 144¡ to 165¡.
They produce a uniform distribu-tion of very small to medium-sized droplets and have large un-obstructed flow passages whichminimize or eliminate clogging.
!\°" and !\›" E series nozzles aremachined from solid bar stock inbrass or stainless steel.
#\°" and !\¤" E series nozzles aremachined from solid bar stock instainless steel and are precision-finished from castings in brass.
Based on largest/heaviest version of each type.
BodyInlet
Diam.Nom.Inches
Q\ŒÁE\´„
Q\ŒÁE\´„U\Á‰Q\ˆO\Á‰
U\Á‰Q\ˆQQ\Á‰QE\Á‰QT\Á‰QU\Á‰E\ˆ
U\´„Q\‰QO\Á‰E\ˆ
OrificeDiam.Nom.Inches
Q\‰Q\‰
Q\‰Q\‰Q\‰T\ŒÁT\ŒÁ
EQ\Á‰EQ\Á‰EQ\Á‰EQ\Á‰EQ\Á‰RQ\Á‰RQ\Á‰
RQ\Á‰RQ\Á‰RQ\Á‰RQ\Á‰
CAPACITY(gallons per minute)
3psi
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
80psi
.27
.27
.32
.44
.55
.44
.55
.821.01.41.82.91.41.62.22.9
.35
.35
.41
.56
.71
.56
.711.11.41.82.33.81.82.12.83.8
.42
.42
.49
.66
.84
.66
.841.31.72.12.84.42.12.53.44.4
.20
.50
.20
.50
.58
.801.0.801.01.52.02.53.35.32.53.04.05.3
.25
.61
.25
.61
.71
.981.2.981.21.82.43.14.06.53.13.74.96.5
.28
.70
.28
.70
.821.11.41.11.42.12.83.54.77.53.54.25.67.5
.35
.86
.35
.861.01.41.71.41.72.63.54.35.79.24.35.26.99.2
.401.0.401.01.21.62.01.62.03.04.05.06.6
10.65.06.08.0
10.6
.491.2.491.21.41.92.41.92.43.74.96.18.1
13.06.17.39.8
13.0
.561.4.561.41.62.32.82.32.84.25.67.19.2
15.07.18.5
11.315.0
100psi
7psi
20psi
80psi
.631.6.631.61.82.53.22.53.24.76.37.9
10.416.87.99.5
12.616.8
164°
164°164°164°164°164°164°165°162°162°162°159°162°163°160°159°
165°154°165°154°154°160°154°160°160°163°152°158°154°152°158°155°152°152°
158°147°158°147°147°151°147°157°157°155°147°154°148°149°154°148°144°149°
HLEDCBANet
Weightoz.
1/8 2, 5 1Q\„ T\ˆ" Sq. E\‰" QT\´„" 1Q\ŒÁ" WT\´„"
1/4 2, 5 1Q\„ T\ˆ" Sq. QE\ŒÁ" QT\´„" 1Q\ˆ" WT\´„"
1/4 8,10 2Q\‰ E\‰" Sq. U\ˆ" Q\„" 1Q\‰" U\ˆ"
3/8 8, 10, 15, 18 1Q\‰" 1E\ˆ" E\‰" 2" 1E\ˆ"20, 25 Sq.3/8 33, 53
1/2 25, 30, 17 1Q\„" 1T\ˆ" U\ˆ" 2E\ˆ" 1T\ˆ"
40, 53Sq.
3/8 8, 10, 15, 4Q\‰ U\ˆ" Oct. 1U\´„" QO\´„" E\ˆ" 1U\ŒÁ" 1QE\ŒÁ" 1Q\ŒÁ"20, 2525,30,
1/2 33,40, 6 1" Oct. 1U\ŒÁ" QQ\ŒÁ" Q\„" 1WT\´„" 2E\ŒÁ" 1Q\‰"53
C6
GE
NE
RA
L P
UR
PO
SE
HO
LLO
W C
ON
E
Standard one-piece cast typeWhirlJet spray nozzles feature a hollow cone spray pattern with a ring-shaped impact area andspray angles of 59¡ to 84¡.
They produce a uniform distri-bution of medium to large-sizeddroplets over a wide range ofpressures and flow rates.
WhirlJet nozzles in these mediumcapacity ranges produce fineratomization than other types of
nozzles operating at the sameflow rate and pressureÉthusthey are especially effectivewhere quick heat transfer oreffective airborne dropletimpingement is required.
WhirlJets also provide an impor-tant benefit with their large andunobstructed flow passages,which minimize or eliminateclogging.
C and D series WhirlJet spraynozzles feature one-piece castconstruction with a precision-
machined finish and the originalWhirlJet whirlchamber design foruniform spray distribution.
CX series slope bottom WhirlJetnozzles feature the same uniformspray performance as the C andD seriesÉplus the added advan-tage of the patented longer-lifeslope bottom designÉto reducethe Òdrilling effectÓ of the liquidvortex in the whirlchamber.
ONE PIECE CAST TYPEMEDIUM–LARGE CAPACITY
CXone-piece cast type/slope bottom design
1"- 21⁄2" NPT or BSPT (F)
Cone-piece cast type
1⁄2"- 21⁄2" NPT or BSPT (F)
Done-piece cast type
1⁄2"- 3⁄4" NPT or BSPT (M)
* Junction Boxes #28 and #29 have eight side outletsÑall others have four.
** Pipe Arms to be suppliedby customer.
*** Write for other sizes.
ⓦ Evaporative cooling in sprayponds and cooling towers
ⓦ Aerating
ⓦ Wetting
ⓦ Evaporative concentration ofwaste water
ⓦ Chemical processes
DimensionsJunction Box
WhirlJetNozzleType
Junction BoxNo.
“A” InletPipe
Conn.NPT orBSPT
“B”OutletPipe
Conn.NPT orBSPT
“C”OutletPipe
Conn.NPT orBSPT
No. ofPipeArms
**
Sizeof
PipeArms
NozzlesPer
JunctionBox
JUNCTION BOX INFORMATION PIPE ARMS**
AdjustableBall Fittings
Split-Eyelet Connectorwith Pressure Gauge Junction Box
COMMON APPLICATIONS
DESIGN FEATURES
ACCESSORIES
SPRAY NOZZLES
JUNCTION BOXES
SEE SECTION G FOR COMPLETE INFORMATION.
WhirlJetNozzle
JunctionBox
TOP VIEW
SIDE VIEW
SPRAY CLUSTER
3⁄4C 25(11⁄2-4-3⁄4) 11⁄2) 4 3⁄4) None 3T\ŒÁ" 4Q\ˆ" 5Q\„ 4 3⁄4)3⁄4C 25(11⁄2-5-3⁄4) 11⁄2) 5 3⁄4) 3⁄4) 3T\ŒÁ" 4Q\ˆ" 5Q\„ 4 3⁄4)
1C, CX 25(2-4-1) 2) 4 1) None 3T\ŒÁ" 4Q\ˆ" 5Q\„ 4 1)11⁄4C, CX 25(2-4-11⁄4) 2) 4 11⁄4) None 3T\ŒÁ" 4Q\ˆ" 5Q\„ 4 11⁄4)
3⁄4C, CX 28(2-8-3⁄4)* 2) 8 3⁄4) None 3Q\„" 4Q\„" 8Q\„ 8 3⁄4)3⁄4C, CX 29(11⁄2-9-3⁄4)* 11⁄2) 9 3⁄4) 3⁄4) 3U\ˆ" 4Q\„" 8 8 3⁄4)3⁄4C, CX 29(2-9-3⁄4)* 2) 9 3⁄4) 3⁄4) 3U\ˆ" 4Q\„" 8 8 3⁄4)
11⁄2C, CX 35(3-4-11⁄2) 3) 4 11⁄2) None 4Q\‰" 5Q\„" 8 4 11⁄2)11⁄2C, CX 35(3-5-11⁄2) 3) 5 11⁄2) 11⁄2) 4Q\‰" 5Q\„" 8 4 11⁄2)
2C, CX 45(4-4-2) 4) 4 2) None 5" 6E\‰" 12 4 2)2C, CX 45(4-5-2) 4) 5 2) 2) 5" 6E\‰" 12 4 2)
21⁄2C, CX 65(5-4-21⁄2) 5) 4 21⁄2) None 6T\ˆ" 9Q\„" 35 4 21⁄2)21⁄2C, CX 65(5-5-21⁄2) 5) 5 21⁄2) 21⁄2) 6T\ˆ" 9Q\„" 35 4 21⁄2)21⁄2C, CX 65(6-4-21⁄2) 6) 4 21⁄2) None 6T\ˆ" 9Q\„" 35 4 21⁄2)21⁄2C, CX 65(6-5-21⁄2) 6) 5 21⁄2) 21⁄2) 6T\ˆ" 9Q\„" 35 4 21⁄2)
3CRC 65(6-5-3) 6) 5 3) 3) 6T\ˆ" 9Q\„" 35 4 3)4CRC 85(8-4-4) 8) 4 4) None 7E\‰" 11Q\„" 48 4 4)4CRC 85(8-5-4) 8) 5 4) 4) 7E\‰" 11Q\„" 48 4 4)
***
XOverallHeight
YOverallWidth
NetWeight
lbs.
10 feet
CX C D
CX C D
C7
GE
NE
RA
L P
UR
PO
SE
HO
LLO
W C
ON
E
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
ORDERING INFORMATION
1 C - SS 10NozzleType
MaterialCode
CapacitySize
InletConnec-
tionPipe Size
NozzleInlet
Conn.NPT orBSPT
NozzleInlet
Conn.NPT orBSPT
NOZZLE TYPE
NOZZLE TYPE
NozzleInlet
Conn.NPT orBSPT
NOZZLE TYPECapacity
Size
StandardMaterials Material Code
no material code = BrassI = Cast IronSS = 316 Stainless Steel (note: Q\„" and E\‰" not available in Stainless Steel)
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
34573457567
104567
10789
10121510121416201620253030354045506060708090
100
SPRAYANGLE
(F)Conn.
CX
(F)Conn.
C
(M)Conn.
D
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦ
ⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦ
Based on largest/heaviest version of each type.
Q Q QQ Q QQ Q
1/2 ⓦ 1T\ŒÁ" 1T\ŒÁ" U\´„" WE\´„" 1U\ˆ" 4Q\„ oz.1/2 ⓦ 1E\‰" 1T\ŒÁ" Q\‰" WE\´„" 2T\ŒÁ" 5 oz.3/4 ⓦ 1Q\„" 1WQ\´„" QO\Á‰" WO\´„" 2O\´„" 7 oz.3/4 ⓦ 2" 1WQ\´„" T\ŒÁ" QT\ŒÁ" 2WE\´„" 7Q\„ oz.
1 ⓦ ⓦ 1E\‰" 1WU\´„" QQ\´„" 1Q\´„" 2T\ˆ" 11oz.1-1/4 ⓦ ⓦ 2Q\ŒÁ" 2E\ŒÁ" U\ŒÁ" 1Q\‰" 3Q\ŒÁ" 1Q\‰ lb.1-1/2 ⓦ ⓦ 2U\ŒÁ" 2U\ˆ" O\ŒÁ" 1WQ\´„" 3QQ\ŒÁ" 1E\‰ lb.
2 ⓦ ⓦ 2QT\ŒÁ" 3QQ\ŒÁ" WE\´„" 2E\´„" 4QU\´„" 3 lb.2-1/2 ⓦ ⓦ 3Q\„" 4Q\„" QT\ŒÁ" 2QQ\ŒÁ" 5QU\´„" 4Q\‰ lb.
A
A
C
C
D
D
L
L
NetWeight
NetWeight
B
B
QO\Á‰E\ˆWO\Á‰QU\´„
T\ŒÁWT\Á‰QT\´„ET\Á‰
WT\Á‰WO\Á‰Q\„WQ\´„
WE\Á‰WU\Á‰EQ\Á‰ET\Á‰WQ\´„
WO\Á‰Q\„O\ŒÁEO\Á‰RE\Á‰QE\ŒÁ
O\ŒÁRQ\Á‰WE\´„TQ\Á‰YQ\Á‰
QQ\ŒÁTT\Á‰1Q\Á‰1Q\ˆ
QT\ŒÁ1Q\ŒÁ1E\ŒÁ1QO\Á‰1WU\Á‰1O\ŒÁ
1WU\Á‰1QO\´„1RU\Á‰1U\ˆ2
U\ŒÁ
U\ŒÁ
QO\´„
O\ŒÁ
QQ\ŒÁ
WU\´„
1E\´„
1U\ŒÁ
1U\ˆ
BodyInlet
Diam.Nom.Inches
3psi
4psi
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
2.02.63.34.62.02.63.34.63.33.94.66.52.63.33.94.66.54.65.25.96.57.89.86.57.89.2
10.513.110.513.116.4
202023262933393946525965
2.33.03.85.32.33.03.85.33.84.55.37.63.03.84.55.37.65.36.06.87.69.1
11.37.69.1
10.612.115.112.115.118.9
232326303438454553606876
2.53.44.25.92.53.44.25.94.25.15.98.43.44.25.15.98.45.96.87.68.4
10.212.78.4
10.211.813.516.913.516.9
21252530343842515159687684
3.04.05.07.03.04.05.07.05.06.07.0
10.04.05.06.07.0
10.07.08.09.0
10.012.015.010.012.014.016.0
2016.0
20253030354045506060708090
100
3.64.86.08.43.64.86.08.46.07.28.4
11.94.86.07.28.4
11.98.49.6
10.811.914.317.911.914.316.719.1
2419.1
243036364248546072728496
108120
4.45.87.3
10.34.45.87.3
10.37.38.8
10.314.65.87.38.8
10.314.610.311.713.214.617.5
2214.617.5
2123292329374444515966738888
103117132146
5.16.88.4
11.95.16.88.4
11.98.4
10.211.916.96.88.4
10.211.916.911.913.515.216.9
2025
16.920242734273442515159687684
102102119135152169
6.28.3
10.414.56.28.3
10.414.510.412.414.5
218.3
10.412.414.5
2114.516.518.6
21253121252933413341526262728393
104124124145165186207
7.29.5
11.916.77.29.5
11.916.711.914.316.7
249.5
11.914.316.7
2416.719.1
22242936242934384838486072728496
108119143143167191215239
8.811.714.6
218.8
11.714.6
2114.617.5
2129
11.714.617.5
212921232629354429354147594759738888
103117132146175175205234264293
80psi
100psi
7psi
20psi
60psi
10.113.516.9
2410.113.516.9
2416.9
202434
13.516.9
2024342427303441513441475468546885
101101118135152169203203237270304338
11.315.118.9
2611.315.118.9
2618.9
232638
15.118.9
2326382630343845573845536076607695
113113132151170189227227264302340378
60°68°74°77°62°68°74°77°59°62°70°73°65°68°70°72°77°64°65°66°67°70°76°65°68°71°74°76°64°69°72°74°66°68°70°72°74°77°67°69°71°73°77°
63°71°77°80°65°71°77°80°61°64°71°75°66°69°73°75°80°65°66°67°69°73°79°67°70°73°75°77°67°72°74°76°67°70°72°74°77°79°68°71°73°75°79°
65°73°80°83°67°73°80°83°63°66°72°77°67°70°77°80°84°66°67°69°71°75°81°67°71°75°77°79°69°74°76°78°70°73°75°78°82°84°71°74°77°80°83°
OrificeDiam.Nom.Inches
CAPACITY(gallons per minute)
C8
GE
NE
RA
LP
UR
PO
SE
HO
LLO
W C
ON
E
ONE AND TWO PIECE CAST TYPELARGE CAPACITY
CFtwo-piece cast type6" flange connection
CRCtwo-piece cast type
11⁄4"-4" NPT or BSPT (F)
ⓦ Water cooling
ⓦ Aerating
ⓦ Wetting
ⓦ Chemical processes
SEE SECTION G FORCOMPLETE INFORMATION.
Split-Eyelet Connectorwith Pressure Gauge
Junction Box
See page C6.
Two-piece Medium and LargeCapacity WhirlJet spray nozzlesfeature a hollow cone spraypattern with a ring-shapedimpact area. They are availablein two spray angle series:narrow angle 45° to 52°, andstandard angle 60° to 86°.
They produce a uniformdistribution of medium to largedroplets over a wide range ofpressures and flow rates.
CRC and CF series nozzles, intwo-piece assemblies, areprecision machine finished fromcast brass, cast iron, or cast 316stainless steel. Sizes 1!\›", 2",and 3" in 316SS have 303stainless steel caps.
One-piece designs of the modelCF WhirlJet are available in avariety of wear-resistantmaterials for severe operatingconditions. Flange sizes of 2", 3",4", and 6" are available for the single-piece models.
All CRC and CF type nozzlesfeature large and unobstructedflow passages for virtually clog-free performance.
CFone-piece design
2"-6" flange connection
SPRAY NOZZLES
2 CRC - SS 30-45°NozzleType
MaterialCode
CapacitySize
InletConnec-
tionPipe Size
ACCESSORIES
COMMON APPLICATIONS
DESIGN FEATURES
ORDERING INFORMATION
PERFORMANCE DATA
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦⓦ ⓦ
NozzleInlet
Conn.NPT orBSPT
NOZZLE TYPECapacity
Size
1-1/4
2
3
4
6
10-45°12-45°14-45°16-45°20-45°30-45°35-45°40-45°45-45°50-45°55-45°
7085100120140
70-45°85-45°100-45°120-45°140-45°
150175200225250275
150-45°175-45°200-45°225-45°250-45°
250300350400450500550625
440-65°550-65°625-65°
SPRAYANGLE
45°45°45°45°45°45°45°45°45°45°45°65°67°69°71°73°45°45°45°45°45°66°68°70°72°74°78°45°45°45°45°45°65°66°68°70°72°74°76°78°60°64°65°
49°49°48°48°47°49°49°48°48°47°47°66°68°72°73°75°49°49°48°48°47°67°70°72°74°76°80°49°49°48°48°47°67°68°70°73°75°76°79°81°61°65°66°
52°51°51°50°49°52°51°50°50°49°49°69°71°74°77°80°52°51°51°50°49°70°71°74°77°81°83°52°51°51°50°49°69°70°72°75°77°79°83°86°62°66°67°
(F) Conn.CRC
Flange Conn.CF
Standard Materials Material Codeno material code = BrassI = Cast IronSS = 316 Stainless SteelConsult your local Sales Representativefor specific material availability
1-pc. 2-pc.
* Available in one-piece or two-piece models.Q QQ QQ Q
Q
EE\Á‰O\ŒÁWQ\´„E\‰U\ˆ
QT\ŒÁ1Q\ŒÁ1E\ŒÁ1QU\Á‰1E\ˆ
1WO\Á‰
1E\ˆ1EU\Á‰1E\‰2Q\ŒÁ2T\ŒÁ1E\ˆ
1EU\Á‰1E\‰2Q\Á‰2T\ŒÁ
22WQ\Á‰2QQ\ŒÁ2QT\ŒÁ3Q\‰3T\ˆ2
2WQ\Á‰2QQ\ŒÁ2QT\ŒÁ3Q\‰
2WO\Á‰2E\‰3
3Q\‰3QT\´„3TE\Á‰4QU\Á‰5Q\ˆ
3QT\´„4QU\Á‰5Q\ˆ
WU\´„
1U\ŒÁ
2Q\‰
3Q\ˆ
4U\ˆ
BodyInlet
Diam.Nom.Inches
CAPACITY(gallons per minute)
3psi
5psi
7psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
6.57.89.2
10.513.1
2023262933364656657892465665789298
11513114716418098
115131147164164196229262294327360408288360408
8.410.211.813.516.9
253034384246597284
102118597284
102118127148169190212232127148169190212212253296338380422465528372465528
10.012.014.016.020.0
3035404550557085
1001201407085
100120140150175200225250275150175200225250250300350400450500550625440550625
12.014.316.719.1
2436424854606684
10212014316784
102120143167179209239269299329179209239269299299358418478537597657746526657746
16.920242734515968768493
119144169203237119144169203237254296338380423465254296338380423423506591676760845928
1055743928
1055
212529334162728393
104114145176207249290145176207249290310362414466518568310362414466518518620724826930
103511401290910
11401290
2429343848728496
108119131167203239287335167203239287335359418478538598656359418478538598598716836955
1075119513151490105013151490
293541475988
103117132146161205249293351410205249293351410440512586660731805440512586660731731877
102011701315146016101830129016101830
3441475468
101118135152169186237287338405474237287338405474507592676761845929507592676761845845
1010118013501520169018602110148518602110
3845536176
113132151170189208264322378454530264322378454530567661756851945
1040567661756851945945
1130132015101700189020802360166020802360
7 psi
20psi
60psi
OrificeDiam.Nom.Inches
C9
GE
NE
RA
L P
UR
PO
SE
HO
LLO
W C
ON
E
CENTER-POST STYLE—POLYPROPYLENE
ACCESSORIES
COMMON APPLICATIONS
DESIGN FEATURES
LAPpolypropylene/
center-post design3⁄8"-1⁄2" NPT or BSPT (F)
APpolypropylene/
center-post design1⁄4"-3⁄8" NPT or BSPT (F)
LBPpolypropylene/
center-post design3⁄8" NPT or BSPT (M)
SPRAY NOZZLES 9360 SERIES Patent No. 4,664,314
Center-Post WhirlJet spraynozzles feature a hollow conespray pattern with a ring-shapedimpact area.
They are molded in fiberglassreinforced polypropylene forgood strength and corrosionresistance at temperatures to160¡F (71¡C).
The Center-Post feature is aninnovation that provides extra-
long service life and excellentspray pattern uniformity byprecisely controlling the fluid vor-tex in the nozzle whirlchamber.
WhirlJet spray nozzles featurelarge unobstructed flowpassages to minimize or elim-inate clogging, as well as goodatomization of liquids at lowerpressures.
They produce excellent resultsin applications where quick heattransfer or effective airbornedroplet impingement is required.
9360-AP series Center-PostWhirlJet spray nozzles are available with standard and wide spray caps and NPT orBSPT (F) inlet connections.
COOLING HEATED JARS
ⓦ Water cooling
ⓦ Aerating
ⓦ Wetting
ⓦ Chemical processes
ⓦ Pressure Regulators
ⓦ Control Valves
ⓦ Solenoid Valves
ⓦ Swivel Connectors
SEE SECTION G FORCOMPLETE INFORMATION.
Split-Eyelet Connector Adjustable 124 Other AccessoriesBall Fittings Strainer
C10
GE
NE
RA
L P
UR
PO
SE
HO
LLO
W C
ON
E
9360 SERIES CENTER-POST STYLE (cont.)POLYPROPYLENE
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
CapacitySize
NOZZLETYPEAP
Inlet Conn. NPTor BSPT (F)1/4 3/8
SPRAYANGLE
CapacitySize
NOZZLETYPE
LAP LBPNPT or NPT or
BSPT (F) BSPT (M)3/8 1/2 3/8
SPRAYANGLE
For other capacity sizes see Data Sheet 9360-3.
Based on largest/heaviest version of each type.
InletDiam.Nom.Inches
OrificeDiam.Nom.Inches
CAPACITY(gallons per minute)
3 5 7 10 20 30 40 60 80 100 7 20 80psi psi psi psi psi psi psi psi psi psi psi psi psi
2 ⓦ ⓦ T\Á‰ T\Á‰ .14 .17 .20 .28 .35 .40 .49 .57 .63 53° 70° 80°2-3 ⓦ ⓦ T\Á‰ E\´„ .17 .20 .24 .34 .42 .48 .59 .68 .76 61° 76° 83°2-5 ⓦ ⓦ T\Á‰ U\Á‰ .20 .23 .28 .40 .48 .56 .69 .79 .89 63° 81° 90°2-8 ⓦ ⓦ T\Á‰ O\Á‰ .23 .28 .33 .47 .57 .66 .81 .93 1.0 71° 87° 95°
2-10 ⓦ ⓦ T\Á‰ QQ\Á‰ .25 .30 .36 .51 .62 .72 .88 1.0 1.1 72° 94° 104°2-15 ⓦ ⓦ T\Á‰ QE\Á‰ .28 .33 .39 .55 .68 .78 .96 1.1 1.2 77° 100° 111°2-20 ⓦ ⓦ T\Á‰ QT\Á‰ .31 .37 .44 .62 .76 .88 1.1 1.2 1.4 81° 103° 113°3-2 ⓦ ⓦ E\´„ T\Á‰ .18 .22 .26 .37 .45 .52 .64 .74 .82 58° 67° 76°
3 ⓦ ⓦ E\´„ E\´„ .21 .23 .30 .43 .52 .60 .73 .85 .95 55° 79° 80°3-5 ⓦ ⓦ E\´„ U\Á‰ .25 .30 .36 .51 .62 .72 .88 1.0 1.1 72° 82° 86°3-8 ⓦ ⓦ E\´„ O\Á‰ .31 .37 .44 .62 .76 .88 1.1 1.2 1.4 73° 88° 92°
3-10 ⓦ ⓦ E\´„ QQ\Á‰ .34 .40 .48 .68 .83 .96 1.2 1.4 1.5 81° 94° 97°3-15 ⓦ ⓦ E\´„ QE\Á‰ .39 .46 .55 .78 .95 1.1 1.3 1.6 1.7 83° 93° 100°3-20 ⓦ ⓦ E\´„ QT\Á‰ .44 .52 .62 .88 1.1 1.2 1.5 1.8 2.0 90° 100° 107°5-2 ⓦ ⓦ O\Á‰ T\Á‰ .36 .51 .62 .72 .88 1.0 1.1 61° 67°5-3 ⓦ ⓦ O\Á‰ E\´„ .34 .41 .58 .71 .82 1.0 1.2 1.3 57° 68° 69°
5 ⓦ ⓦ O\Á‰ U\Á‰ .35 .42 .50 .70 .86 1.0 1.2 1.4 1.6 70° 75° 79°5-8 ⓦ ⓦ O\Á‰ O\Á‰ .42 .50 .60 .85 1.0 1.2 1.5 1.7 1.9 80° 78° 82°
5-10 ⓦ ⓦ O\Á‰ QQ\Á‰ .48 .56 .67 1.0 1.2 1.4 1.7 1.9 2.1 80° 87° 89°5-15 ⓦ ⓦ O\Á‰ QE\Á‰ .57 .67 .80 1.1 1.4 1.6 2.0 2.3 2.6 83° 91° 95°5-20 ⓦ ⓦ O\Á‰ QT\Á‰ .61 .72 .86 1.2 1.5 1.7 2.1 2.4 2.7 88° 98° 102°8-5 ⓦ ⓦ QQ\Á‰ U\Á‰ .42 .50 .60 .85 1.0 1.2 1.5 1.7 1.9 60° 68° 71°
8 ⓦ ⓦ QQ\Á‰ O\Á‰ .44 .57 .67 .80 1.1 1.4 1.6 2.0 2.3 2.5 65° 72° 74°8-10 ⓦ ⓦ QQ\Á‰ QQ\Á‰ .51 .66 .79 .94 1.3 1.6 1.9 2.3 2.7 3.0 73° 81° 81°8-15 ⓦ ⓦ QQ\Á‰ QE\Á‰ .59 .76 .90 1.1 1.5 1.9 2.2 2.6 3.1 3.4 78° 84° 87°8-20 ⓦ ⓦ QQ\Á‰ QT\Á‰ .65 .83 .99 1.2 1.7 2.0 2.4 2.9 3.3 3.7 84° 89° 92°10-5 ⓦ ⓦ E\ŒÁ U\Á‰ .54 .65 .92 1.1 1.3 1.6 1.8 2.0 55° 64° 67°10-8 ⓦ ⓦ E\ŒÁ O\Á‰ .61 .72 .86 1.2 1.5 1.7 2.1 2.4 2.7 60° 64° 66°
10 ⓦ ⓦ E\ŒÁ QQ\Á‰ .55 .72 .84 1.0 1.4 1.7 2.0 2.4 2.8 3.1 70° 76° 75°10-15 ⓦ ⓦ E\ŒÁ QE\Á‰ .67 .86 1.0 1.2 1.7 2.1 2.4 3.0 3.5 3.9 76° 81° 79°10-20 ⓦ ⓦ E\ŒÁ QT\Á‰ .75 1.0 1.2 1.4 2.0 2.4 2.8 3.5 3.9 4.4 78° 85° 98°15-5 ⓦ ⓦ QT\Á‰ U\Á‰ .76 1.1 1.3 1.5 1.9 2.2 2.4 65° 60°15-8 ⓦ ⓦ QT\Á‰ O\Á‰ .85 1.0 1.4 1.8 2.0 2.5 2.9 3.2 55° 68° 64°
15-10 ⓦ ⓦ QT\Á‰ QQ\Á‰ .85 1.0 1.2 1.7 2.1 2.4 2.9 3.4 3.8 65° 75° 71°15 ⓦ ⓦ QT\Á‰ QE\Á‰ .82 1.1 1.3 1.5 2.1 2.6 3.0 3.7 4.2 4.7 70° 72° 75°
15-20 ⓦ ⓦ QT\Á‰ QT\Á‰ .93 1.2 1.4 1.7 2.4 2.9 3.4 4.2 4.8 5.4 78° 80° 82°
BodyInlet
Diam.Nom.Inches
OrificeDiam.Nom.Inches
CAPACITY(gallons per minute)
3 5 7 10 20 30 40 60 80 100 7 20 80psi psi psi psi psi psi psi psi psi psi psi psi psi
20-5 ⓦ Q\‰ Q\ˆ .83 1.2 1.4 1.7 2.0 2.3 2.6 40° 55°20-8 ⓦ Q\‰ QQ\Á‰ .90 1.1 1.5 1.9 2.2 2.6 3.1 3.4 40° 47° 60°
20-10 ⓦ Q\‰ E\ŒÁ .97 1.2 1.4 2.0 2.4 2.8 3.4 3.9 4.4 39° 55° 65°20-15 ⓦ Q\‰ QT\Á‰ .99 1.3 1.5 1.8 2.5 3.1 3.6 4.4 5.1 5.7 55° 63° 68°
20 ⓦ Q\‰ Q\‰ 1.1 1.4 1.7 2.0 2.8 3.5 4.0 4.9 5.6 6.3 59° 66° 70°20-25 ⓦ Q\‰ QO\Á‰ 1.4 1.8 2.1 2.5 3.5 4.3 5.0 6.2 7.1 7.9 60° 73° 77°20-40 ⓦ Q\‰ WE\Á‰ 1.6 2.0 2.4 2.9 4.0 5.0 5.7 7.0 8.1 9.0 80° 82° 86°20-50 ⓦ Q\‰ U\ŒÁ 1.9 2.5 2.9 3.5 4.9 6.1 7.0 8.5 9.9 11.0 83° 90° 97°20-60 ⓦ Q\‰ EE\Á‰ 2.2 2.8 3.3 4.0 5.7 6.9 8.0 9.8 11.3 12.6 86° 94° 99°25-8 ⓦ O\´„ QQ\Á‰ 1.2 1.7 2.1 2.4 2.9 3.4 3.8 42° 57°
25-10 ⓦ O\´„ E\ŒÁ .82 1.1 1.3 1.5 2.1 2.6 3.0 3.7 4.2 4.7 35° 50° 59°25-15 ⓦ O\´„ QT\Á‰ 1.0 1.3 1.6 1.9 2.7 3.3 3.8 4.6 5.3 6.0 44° 57° 64°25-20 ⓦ O\´„ Q\‰ 1.2 1.5 1.8 2.2 3.1 3.7 4.3 5.3 6.1 6.8 53° 63° 68°
25 ⓦ O\´„ QO\Á‰ 1.4 1.8 2.1 2.5 3.5 4.3 5.0 6.2 7.1 7.9 60° 70° 74°25-40 ⓦ O\´„ WE\Á‰ 1.7 2.2 2.7 3.2 4.5 5.5 6.4 7.8 9.0 10.1 69° 73° 79°25-50 ⓦ O\´„ U\ŒÁ 2.1 2.8 3.3 3.9 5.5 6.8 7.8 9.6 11.0 12.3 76° 81° 85°25-60 ⓦ O\´„ EE\Á‰ 2.5 3.2 3.8 4.5 6.4 7.8 9.0 11.0 12.7 14.2 83° 89° 92°40-8 ⓦ ⓦ ⓦ WE\Á‰ QQ\Á‰ 1.5 2.2 2.7 3.1 3.7 4.3 4.8 41° 48°
40-10 ⓦ ⓦ ⓦ WE\Á‰ E\ŒÁ 1.5 1.8 2.5 3.1 3.6 4.4 5.1 5.7 34° 45° 53°40-15 ⓦ ⓦ ⓦ WE\Á‰ QT\Á‰ 1.3 1.7 2.0 2.4 3.4 4.2 4.9 5.9 6.9 7.7 44° 48° 57°40-20 ⓦ ⓦ ⓦ WE\Á‰ Q\‰ 1.5 1.9 2.2 2.7 3.8 4.6 5.3 6.5 7.5 8.4 45° 52° 59°40-25 ⓦ ⓦ ⓦ WE\Á‰ QO\Á‰ 1.8 2.3 2.7 3.2 4.5 5.5 6.4 7.8 9.0 10.1 48° 56° 61°
40 ⓦ ⓦ ⓦ WE\Á‰ WE\Á‰ 2.2 2.8 3.3 4.0 5.7 6.9 8.0 9.8 11.3 12.6 67° 71° 73°40-50 ⓦ ⓦ ⓦ WE\Á‰ U\ŒÁ 2.8 3.6 4.2 5.0 7.1 8.7 10.0 12.3 14.1 15.9 68° 80° 84°40-60 ⓦ ⓦ ⓦ WE\Á‰ EE\Á‰ 3.3 4.2 5.0 6.0 8.4 10.3 11.9 14.6 16.7 18.9 80° 86° 90°
40-50.1 ⓦ WE\Á‰ WU\Á‰ 2.8 3.6 4.2 5.0 7.1 8.7 10.0 12.3 14.1 15.9 40° 47° 50°
Part No. “A” “B” “C”
9360-1/4AP-PP 1U\ŒÁ" 1" 1Q\‰"9360-3/8AP-PP 1QU\´„" 1E\´„" 1T\ŒÁ"
Part No. “A” “B” “C”
9360-3/8LAP-PP 1WO\´„" 1O\´„" 1Q\„"9360-3/8LBP-PP 2E\ŒÁ" 1O\ŒÁ" 1Q\„"9360-1/2LAP-PP 2Q\´„" 1QE\´„" 1O\ŒÁ"
C11
GE
NE
RA
LP
UR
PO
SE
HO
LLO
W C
ON
E
9360 SERIESWIDE ANGLE SPRAY
CapacitySize
NOZZLETYPEAP
Inlet Conn.NPT or BSPT (F)
1/4 3/8
SPRAYANGLE
CapacitySize
NOZZLETYPE
LAP LBPNPT or NPT or
BSPT (F) BSPT (M)3/8 1/2 3/8
SPRAYANGLE
For other capacity sizes see Data Sheet 9360-2.
ORDERING INFORMATIONSTANDARD
SPRAY NOZZLE
9360-3/8 AP- PP 3Capac-
itySize
MaterialCode
NozzleType
InletConnec-
tionPipeSize
InletDiam.Nom.Inches
OrificeDiam.Nom.Inches
CAPACITY(gallons per minute)
3 5 7 10 20 30 40 60 80 100 7 20 80psi psi psi psi psi psi psi psi psi psi psi psi psi
2-5W ⓦ ⓦ T\Á‰ Q\ˆ .20 .23 .28 .40 .48 .56 .69 .79 .89 126° 135° 131°2-8W ⓦ ⓦ T\Á‰ T\´„ .22 .26 .31 .44 .54 .62 .76 .88 .98 121° 133° 130°
2-10W ⓦ ⓦ T\Á‰ QQ\Á‰ .24 .28 .34 .48 .59 .68 .83 .96 1.1 121° 135° 127°2-15W ⓦ ⓦ T\Á‰ U\´„ .27 .32 .38 .54 .66 .76 .93 1.1 1.2 120° 133° 132°2-20W ⓦ ⓦ T\Á‰ QT\Á‰ .30 .35 .42 .60 .73 .84 1.0 1.2 1.3 111° 132° 135°3-5W ⓦ ⓦ E\´„ Q\ˆ .25 .30 .36 .51 .62 .72 .88 1.0 1.1 133° 131° 109°3-8W ⓦ ⓦ E\´„ T\´„ .30 .35 .42 .60 .73 .84 1.0 1.2 1.3 133° 131° 110°
3-10W ⓦ ⓦ E\´„ QQ\Á‰ .37 .44 .52 .74 .90 1.0 1.3 1.5 1.6 128° 130° 115°3-15W ⓦ ⓦ E\´„ U\´„ .40 .47 .56 .79 .97 1.1 1.4 1.6 1.8 128° 130° 118°3-20W ⓦ ⓦ E\´„ QT\Á‰ .42 .49 .59 .83 1.0 1.2 1.5 1.7 1.9 119° 134° 136°5-5W ⓦ ⓦ O\Á‰ Q\ˆ .35 .42 .50 .70 .86 1.0 1.2 1.4 1.6 125° 112° 98°5-8W ⓦ ⓦ O\Á‰ T\´„ .42 .50 .60 .85 1.0 1.2 1.5 1.7 1.9 125° 112° 97°
5-10W ⓦ ⓦ O\Á‰ QQ\Á‰ .48 .56 .67 1.0 1.2 1.4 1.7 1.9 2.1 125° 118° 102°5-15W ⓦ ⓦ O\Á‰ U\´„ .57 .67 .80 1.1 1.4 1.6 2.0 2.3 2.6 130° 125° 105°5-20W ⓦ ⓦ O\Á‰ QT\Á‰ .61 .72 .86 1.2 1.5 1.7 2.1 2.4 2.7 125° 125° 112°8-5W ⓦ ⓦ QQ\Á‰ Q\ˆ .42 .50 .60 .85 1.0 1.2 1.5 1.7 1.9 119° 102° 99°8-8W ⓦ ⓦ QQ\Á‰ T\´„ .44 .57 .67 .80 1.1 1.4 1.6 2.0 2.3 2.5 112° 100° 87°
8-10W ⓦ ⓦ QQ\Á‰ QQ\Á‰ .50 .64 .76 .91 1.3 1.6 1.8 2.2 2.6 2.9 115° 102° 90°8-15W ⓦ ⓦ QQ\Á‰ U\´„ .59 .76 .90 1.1 1.5 1.9 2.2 2.6 3.1 3.4 121° 110° 98°8-20W ⓦ ⓦ QQ\Á‰ QT\Á‰ .65 .83 .99 1.2 1.7 2.0 2.4 2.9 3.3 3.7 121° 113° 106°10-5W ⓦ ⓦ E\ŒÁ Q\ˆ .54 .65 .92 1.1 1.3 1.6 1.8 2.0 115° 98° 85°10-8W ⓦ ⓦ E\ŒÁ T\´„ .61 .72 .86 1.2 1.5 1.7 2.1 2.4 2.7 110° 95° 84°
10-10W ⓦ ⓦ E\ŒÁ QQ\Á‰ .55 .72 .84 1.0 1.4 1.7 2.0 2.4 2.8 3.1 111° 97° 89°10-15W ⓦ ⓦ E\ŒÁ U\´„ .67 .86 1.0 1.2 1.7 2.1 2.4 3.0 3.5 3.9 113° 104° 97°10-20W ⓦ ⓦ E\ŒÁ QT\Á‰ 75 1.0 1.2 1.4 2.0 2.4 2.8 3.5 3.9 4.4 118° 107° 102°15-5W ⓦ ⓦ QT\Á‰ Q\ˆ .76 1.1 1.3 1.5 1.9 2.2 2.4 91° 80°15-8W ⓦ ⓦ QT\Á‰ T\´„ .85 1.0 1.4 1.8 2.0 2.5 2.9 3.2 102° 93° 80°
15-10W ⓦ ⓦ QT\Á‰ QQ\Á‰ .85 1.0 1.2 1.7 2.1 2.4 2.9 3.4 3.8 107° 97° 83°15-15W ⓦ ⓦ QT\Á‰ U\´„ .82 1.1 1.3 1.5 2.1 2.6 3.0 3.7 4.2 4.7 110° 98° 90°15-20W ⓦ ⓦ QT\Á‰ QT\Á‰ .93 1.2 1.4 1.7 2.4 2.9 3.4 4.2 4.8 5.4 112° 105° 100°
BodyInlet
Diam.Nom.Inches
OrificeDiam.Nom.Inches
CAPACITY(gallons per minute)
3 5 7 10 20 30 40 60 80 100 7 20 80psi psi psi psi psi psi psi psi psi psi psi psi psi
20-8W ⓦ Q\‰ QQ\Á‰ .90 1.1 1.5 1.9 2.2 2.6 3.1 3.4 99° 96° 86°20-10W ⓦ Q\‰ E\ŒÁ .97 1.2 1.4 2.0 2.4 2.8 3.4 3.9 4.4 101° 98° 88°20-15W ⓦ Q\‰ U\´„ .99 1.3 1.5 1.8 2.5 3.1 3.6 4.4 5.1 5.7 104° 100° 91°20-20W ⓦ Q\‰ Q\‰ 1.1 1.4 1.7 2.0 2.8 3.5 4.0 4.9 5.6 6.3 106° 101° 93°20-25W ⓦ Q\‰ O\´„ 1.4 1.8 2.1 2.5 3.5 4.3 5.0 6.2 7.1 7.9 109° 104° 95°20-40W ⓦ Q\‰ QQ\´„ 1.6 2.0 2.4 2.9 4.0 5.0 5.7 7.0 8.1 9.0 110° 107° 98°20-50W ⓦ Q\‰ QE\´„ 1.9 2.5 2.9 3.5 4.9 6.1 7.0 8.5 9.9 11.0 111° 108° 100°25-8W ⓦ O\´„ QQ\Á‰ 1.2 1.7 2.1 2.4 2.9 3.4 3.8 89° 78°
25-10W ⓦ O\´„ E\ŒÁ 1.3 1.5 2.1 2.6 3.0 3.7 4.2 4.7 100° 92° 81°25-15W ⓦ O\´„ U\´„ 1.3 1.6 1.9 2.7 3.3 3.8 4.6 5.3 6.0 102° 96° 85°25-20W ⓦ O\´„ Q\‰ 1.2 1.5 1.8 2.2 3.1 3.7 4.3 5.3 6.1 6.8 104° 99° 88°25-25W ⓦ O\´„ O\´„ 1.4 1.8 2.1 2.5 3.5 4.3 5.0 6.2 7.1 7.9 107° 102° 91°25-40W ⓦ O\´„ QQ\´„ 1.7 2.2 2.7 3.2 4.5 5.5 6.4 7.8 9.0 10.1 109° 105° 94°25-50W ⓦ O\´„ QE\´„ 2.1 2.8 3.3 3.9 5.5 6.8 7.8 9.6 11.0 12.3 110° 108° 99°40-10W ⓦ ⓦ ⓦ WE\Á‰ E\ŒÁ 1.5 1.8 2.5 3.1 3.6 4.4 5.1 5.7 95° 85° 80°40-15W ⓦ ⓦ ⓦ WE\Á‰ U\´„ 1.3 1.7 2.0 2.4 3.4 4.2 4.9 5.9 6.9 7.7 97° 88° 82°40-20W ⓦ ⓦ ⓦ WE\Á‰ Q\‰ 1.5 1.9 2.2 2.7 3.8 4.6 5.3 6.5 7.5 8.4 100° 94° 88°40-25W ⓦ ⓦ ⓦ WE\Á‰ O\´„ 1.8 2.3 2.7 3.2 4.5 5.5 6.4 7.8 9.0 10.1 103° 97° 91°40-40W ⓦ ⓦ ⓦ WE\Á‰ QQ\´„ 2.2 2.8 3.3 4.0 5.7 6.9 8.0 9.8 11.3 12.6 106° 99° 93°40-50W ⓦ ⓦ ⓦ WE\Á‰ QE\´„ 2.8 3.6 4.2 5.0 7.1 8.7 10.0 12.3 14.1 15.9 109° 101° 96°
C12
GE
NE
RA
LP
UR
PO
SE
HO
LLO
W C
ON
E
IN-LINE SERIES
BDremovable cap
3⁄8"-11⁄2" NPT or BSPT (M)
SPRAY NOZZLES
In-line style WhirlJet spraynozzles feature a hollow conespray pattern with a ring-shapedimpact area and uniform spraydistribution.
They produce small size dropletsand have large unobstructed flow passages for non-cloggingperformance.
The spray caps are interchange-able within each pipe size group,
and BD series caps also come in the wide angle spray style. Write for Data Sheet 14386 forspecifications.
This in-line style has a lowerprofile projection when installedin a tee or pipe header and iscommonly used for coal dustsuppression.
The BD series is of all metalconstruction.in Pipe Header
in Pipe FittingTee, Coupling, etc.
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
NozzleInlet Conn.
NPT orBSPT (M)
NOZZLE TYPE Capacity
Size
3/8
1/2
3/4
1-1/2
235810
20-1058101520255810152025
50-50.3405060708090100110120
SPRAYANGLE
BD
StandardMaterials *Dual inlets, each in diameter specified.
Nozzle No.
Material Codeno material code = BrassSS = 303 Stainless Steel
DIMENSIONS & WEIGHTSPERFORMANCE DATA
DESIGN FEATURES
ORDERING INFORMATION
3/8 BD - SS 10NozzleType
MaterialCode
CapacitySize
InletConnection
Pipe Size
T\Á‰E\´„Q\ˆT\´„QQ\Á‰QQ\Á‰
O\Á‰T\´„QQ\Á‰QE\Á‰QT\Á‰O\´„
Q\ˆT\´„QQ\Á‰U\´„Q\‰QO\Á‰E\ˆ
T\ŒÁE\ˆU\ŒÁQ\„O\ŒÁEU\Á‰T\ˆRE\Á‰WE\´„
E\´„E\´„U\Á‰T\´„T\´„*T\´„
Q\ˆT\´„QQ\Á‰*QQ\Á‰*E\ŒÁ*QE\Á‰
O\Á‰QQ\Á‰QE\Á‰Q\‰O\´„O\´„*O\´„
*E\ˆ*E\ˆ*E\ˆ*E\ˆ*E\ˆ*E\ˆ*E\ˆ*E\ˆ*E\ˆ
BodyInlet
Diam.Nom.Inches
CAPACITY(gallons per minute)
3psi
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
80psi
.55
.821.11.4.27.44.55.821.11.42.72.22.73.33.84.44.95.56.06.6
.21
.35
.56
.71
.97
.35
.56
.711.11.41.8.35.56.711.11.41.83.52.83.54.35.05.76.47.17.88.5
.25
.42
.66
.841.1.42.66.841.31.72.1.42.66.841.31.72.14.23.34.25.05.86.77.58.49.2
10.1
.20
.30
.50
.801.01.4.50.801.01.52.02.5.50.801.01.52.02.55.04.05.06.07.08.09.0
10.011.012.0
.25
.37
.61
.981.21.7.61.981.21.82.43.1.61.981.21.82.43.16.04.96.17.48.69.8
11.012.213.514.7
.28
.42
.701.11.41.9.701.11.42.12.83.5.701.11.42.12.83.57.05.77.18.59.9
11.312.714.115.517.0
.35
.52
.861.41.72.4.861.41.72.63.54.3.861.41.72.63.54.38.56.98.7
10.412.113.915.617.319.0
21
.40
.601.01.62.02.71.01.62.03.04.05.01.01.62.03.04.05.0
10.08.01012141618202224
.48
.731.22.02.53.31.22.02.53.74.96.11.22.02.53.74.96.1
12.29.8
12.314.717.119.6
22252729
.56
.851.42.32.83.81.42.32.84.25.67.11.42.32.84.25.67.1
14.111.314.217.019.8
2325283134
100psi
7psi
20psi
80psi
.63
.951.62.53.24.31.62.53.24.76.37.91.62.53.24.76.37.9
15.812.615.8
19222529323538
52°56°56°55°61°63°61°63°60°63°59°64°62°64°64°63°63°70°70°72°74°76°78°81°83°85°87°
60°64°67°65°65°65°73°69°70°67°65°63°73°70°72°72°70°70°72°73°75°76°79°82°84°86°88°90°
70°77°76°70°72°67°79°73°74°70°69°68°79°74°75°74°74°74°73°74°77°79°83°84°84°86°88°90°
OrificeDiam.Nom.Inches
A B C NetWeight
3⁄8BD— 1E\´„" 1Q\‰" QQ\ŒÁ" Hex. 1 oz.1⁄2BD— 1O\´„" 1QT\´„" U\ˆ" Hex. 2 oz.3⁄4BD— 1Q\„" 1E\‰" 1Q\ŒÁ" Hex. 4 oz.
11⁄2BD— 2E\ˆ" 2T\ˆ" 2" Hex. 21 oz.
A complete selection of in-linehollow cone spray nozzles producing narrow angle spray.Capacity selection from 1.5 -4930 gpm (5.7 to 18,600 l/min).Designed with an internal vane to produce hollow cone spray
with uniform distribution. Barstock sizes available in brass,mild steel or 303 stainlesssteel…larger cast type sizes inbrass or 316 stainless steel. See Data Sheet 7120.
C13
GE
NE
RA
LP
UR
PO
SE
HO
LLO
W C
ON
E
“MINER NOZZLES”
Gthree-piece nozzleNPT or BSPT (F)
Hthree-piece cast type nozzle
NPT or BSPT (F)
Htwo-piece nozzleNPT or BSPT (F)
30° ANGLE SPRAY
BDMremovable cap/
nylon body3⁄8" NPT or BSPT (M)
The BDM series features abright yellow fiberglass rein-forced nylon inlet body, a morerecessed spray cap to protectthe orifice area from damageand self-locking thread to pre-vent cap loss due to vibration.
Maximum recommendedoperating pressure is 500 psi (34 bar).
PERFORMANCE DATA
DESIGN FEATURES
DESIGN FEATURES
ORDERING INFORMATION
3/8 BDM - 5NozzleType
CapacitySize
InletConnectionPipe Size
SPRAY NOZZLES
ⓦⓦⓦⓦⓦⓦⓦⓦ
Inlet PipeConn.NPTorBSPT(M)
Nozzle Type Capac-
itySize
3/8
2-0.52-12
3-235
10-220-10
SPRAYANGLE
53°60°57°64°73°30°61°
52°65°69°68°75°78°46°60°
45°50°62°58°64°72°40°49°
BDM
E\Á‰Q\ŒÁT\Á‰T\Á‰E\´„Q\ˆT\Á‰QQ\Á‰
CAPACITY(gallons per minute)
10psi
20psi
40psi
100psi
200psi
300psi
400psi
500psi
.20
.22
.30
.50
.351.4
.16
.28
.31
.42
.71
.491.9
.16
.22
.40
.44
.591.0.702.7
.25
.36
.63
.69
.941.61.14.3
.36
.51
.89
.981.32.21.66.0
.44
.621.11.21.62.71.97.4
.51
.721.31.41.93.22.28.5
.57
.801.41.62.13.52.59.5
20psi
100psi
500psi
OrificeDiam.Inches
slope-bottom designangle-type spray
3⁄8" NPT or BSPT (M)
C14
GE
NE
RA
LP
UR
PO
SE
HO
LLO
W C
ON
E
The 104 and SSTC Series highcapacity SprayDry®, WhirlJet®
nozzles are designed to providegood atomization with uniformspray distribution throughouttheir hollow cone spray patterns.Capacities range from 50 to1350 gph (189 to 5110 l/h) at1000 psi (69 bar).
These durable, precisionnozzles feature quick and easyassembly and disassembly.They also feature an open whirl-chamber with no internal core fornon-clogging performance.
Interchangeable orifice insertsand whirlchambers provide arange of over 150 differentcapacities and spray angles.Spray performance is the samefor both series.
The 104 Series is rated forspraying pressures up to amaximum of 5000 psi (345 bar).In this series, the whirlchamberis held securely in place with alock screw.
The SSTC Series is rated for amaximum spraying pressure of1000 psi (69 bar). The whirlcham-ber is held in place with a spring.
The standard material for nozzlebodies and caps is 303 stainlesssteel solid bar stock.
The orifice inserts and whirl-chambers are tungsten carbide.
The whirlchambers are availablein two styles: slope bottom andflat bottom. The slope bottomstyle is a patented longerwearing design. It is supplied asthe standard on the 104 series.The flat bottom style is standardon the SSTC; optional on the 104.
Recommended operatingtemperature is 300°F (150°C)with the standard fiber gasket.Optional gasket materials areavailable to allow operation at upto 1000°F (540°C).
For additional performance datainformation write for Bulletin 250and Data Sheets 4347-1, -2; and10400-1, -2, -3, -4 and -5.
HIGH PRESSURETUNGSTEN CARBIDE
DESIGN FEATURES
DIMENSIONS & WEIGHTS
AASSTCin-line spray
1⁄4"-1⁄2" NPT or BSPT (F)
BBSSTCangle-type spray
3⁄8" NPT or BSPT (M)
AAASSTCangle-type spray
1⁄2" NPT or BSPT (F)
104AAslope-bottom design
in-line spray1⁄4"-1⁄2" NPT or BSPT (F)
104B 104Aslope-bottom design
angle-type spray1⁄2" NPT or BSPT (F)
SPRAY NOZZLES
Nozzle TypeINLET CONN.
Male NPT Female NPTor BSPT or BSPT
Based on largest/heaviest version of each type.
TYPICAL SSTC PARTS
BODY
ORIFICE INSERT
SLOPE-BOTTOM WHIRLCHAMBERINSERT
SPRING
GASKET
CAP
TYPICAL 104 PARTS
BODY
GASKET
LOCK SCREW
SLOPE-BOTTOM WHIRLCHAMBERINSERT
CAP WITH ORIFICE INSERT
1⁄4 AASSTC 1⁄4" 1E\ˆ" 2O\´„" 121⁄2 oz.3⁄8 AASSTC 3⁄8" 1E\ˆ" 2O\´„"1⁄2 AASSTC 1⁄2" 1E\ˆ" 2O\´„" 121⁄2 oz.3⁄8 BBSSTC 3⁄8" 2" T\ˆ" 1E\ˆ" 2E\´„" 141⁄2 oz.1⁄2 AAASSTC 1⁄2" 2" T\ˆ" 1E\ˆ" 2E\´„" 1 lb.104-1⁄4 AA 1⁄4" 1E\‰" 2QQ\´„"104-3⁄8 AA 3⁄8" 1E\‰" 2QQ\´„" 1Q\‰ lbs.104-1⁄2 AA 1⁄2" 1E\‰" 2QQ\´„"
104-3⁄8 B 3⁄8" 2Q\„" U\ˆ" 1T\ˆ" 2U\´„" 1Q\„ lbs.104-1⁄2 A 1⁄2" 2T\ŒÁ" U\ˆ" 1U\ŒÁ" 2U\´„" 1E\‰ lbs.
AHex. B C D H Net
Weight
C15
GE
NE
RA
LP
UR
PO
SE
HO
LLO
W C
ON
E
SEE SECTION G FOR COMPLETEINFORMATION.
More Spray Dry Nozzles areshown in Special PurposeNozzle Section, page F10.
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
CapacitySize
1
1.5
2
3
4
5
6
7
8
10
15
20
1/43/81/21/43/81/21/43/81/21/43/81/21/43/81/21/43/81/21/43/81/21/43/81/21/43/81/21/43/81/21/43/81/21/43/81/2
NozzleInlet
Conn.NPT orBSPT
NOZZLE TYPE
104
A B AA AA BB AAA
SSTC
Pertains to 104 only
SLOPE BOTTOM WHIRLCHAMBER
WC 4 X - TCCapacity
SizeSlope
BottomDesign
TungstenCarbideMaterial
WhirlChamber
ORIGINAL DESIGN WHIRLCHAMBER
WC 4 - TCCapacity
SizeTungstenCarbideMaterial
WhirlChamber
ORIFICE INSERT
WI 4 - TCCapacity
SizeTungstenCarbideMaterial
Orifice Insert
COMPLETE NOZZLEASSEMBLY
1/4 AA - SSTC 4NozzleType
CapacitySize
NozzleType
InletConnectionPipe Size
PERFORMANCE DATA
ACCESSORIES
ORDERING INFORMATIONCOMPLETE NOZZLE
ASSEMBLYWHIRLCHAMBERNOZZLE ORIFICE INSERTBODY COMBINATION
AA104-1/4 AA + TCX - 4NozzleType
InletConnec-
tionPipeSize
SlopeBottom
InletType
CapacitySize
OrificeDiam.Inches
.055
.070
.078
.094
.109
.129
.136
.141
.156
.177
.213
.250
.1768°
.2172°
.2473°
.2774°
.3375°
.3876°
.4671°
.6067°
.7462°
.8557°
.2778°
.3282°
.3783°
.4284°
.5280°
.6077°
.7375°
.9472°
1.1565°
1.3359°
.3477°
.4181°
.4881°
.5381°
.6680°
.7579°
.9273°
1.1968°
1.4662°
1.6957°
.5278°
.6479°
.7479°
.8278°
1.0177°
1.1676°
1.4367°
1.8459°
2.2453°
2.6048°
.6676°
.8176°
.9377°
1.0478°
1.2877°
1.4876°
1.8167°
2.3459°
2.8553°
3.3048°
.8591°
1.0491°
1.2088°
1.3486°
1.6482°
1.9079°
2.3271°
2.9963°
3.6556°
4.2350°
1.0189°
1.2389°
1.4286°
1.5983°
1.9680°
2.2678°
2.7669°
3.5661°
4.3656°
5.0452°
1.0991°
1.3388°
1.5385°
1.7283°
2.1280°
2.4478°
2.9869°
3.8660°
4.6959°
5.4558°
1.3692°
1.6689°
1.9286°
2.1483°
2.6478°
3.0274°
3.7265°
4.7957°
5.8454°
6.7952°
1.8194°
2.2187°
2.6685°
2.8683°
3.5179°
4.0575°
4.9567°
6.4059°
7.7857°
9.0555°
2.9386°
3.6082°
4.1380°
4.6278°
5.6773°
6.5568°
8.0260°
10.352°
12.651°
14.650°
4.5080°
5.5080°
6.3580°
7.1080°
8.7472°
10.164°
12.355°
15.947°
19.446°
22.545°
40psi
60psi
80psi
100psi
150psi
200psi
300psi
500psi
750psi
1,000psi
1,500psi
2,000psi
2,500psi
3,000psi
4,000psi
5,000psi
1.0455°
1.2053°
1.3451°
1.4850°
1.7048°
1.9046°
1.6357°
1.8855°
2.1053°
2.3051°
2.6649°
2.9747°
2.0755°
2.3953°
2.6751°
2.9350°
3.3848°
3.7846°
3.1846°
3.6844°
4.1141°
4.5039°
5.2037°
5.8135°
5.1846°
5.9845°
6.6943°
7.3340°
8.4637°
9.4634°
4.0446°
4.6744°
5.2241°
5.7238°
6.6035°
7.3833°
6.1748°
7.1346°
7.9743°
8.7342°
10.140°
11.338°
6.6755°
7.7153°
8.6251°
9.4448°
10.945°
12.242°
8.3251°
9.6050°
10.748°
11.846°
13.644°
15.242°
11.148°
12.846°
14.344°
15.742°
18.140°
20.238°
17.946°
20.644°
23.143°
25.340°
29.236°
32.632°
27.642°
31.839°
35.637°
39.035°
45.032°
50.330°
CAPACITY (gallons per minute)and SPRAY ANGLE
C16
GE
NE
RA
LP
UR
PO
SE
HO
LLO
W C
ON
E
OFFSET TYPEINTERCHANGEABLE CAP
BAremovable cap
3⁄8"-1⁄2" NPT or BSPT (M)
8686removable deflector cap1⁄8"-3⁄8" NPT or BSPT (M)
DEFLECTED SPRAY TYPE
SPRAY NOZZLE
Offset type WhirlJet spraynozzles feature a hollow conespray pattern with a ring-shapedimpact area.
The caps are interchangeablewithin each pipe size group andwide angle caps are also avail-able. Write for Data Sheet 14385for specifications.
Typical applications includesulphur burning.
Performance features includesmall droplet size and large,unobstructed, flow passages.
Deflected type WhirlJets featurea hollow cone spray pattern witha ring-shaped impact area anduniform distribution.
Angles of deflection are deter-mined by the deflector caps,which come in three styles:120°, 150°, and 180° includedangle of spray.
Maximum recommended oper-ating pressure is 500 psi (34 bar).
Based on largest/heaviest version of each type.
SPRAY NOZZLE
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
NozzleInlet
Conn.NPT or
BSPT (M)
NozzleType Capac-
itySize
3/8
1/2
35810152025
2530405060
SPRAYANGLE
52°64°62°64°64°63°63°
63°67°72°74°77°
64°73°70°72°72°70°70°
66°71°76°79°82°
77°79°74°75°74°74°74°
71°75°78°82°86°
BA
StandardMaterials Material Code
no material code = BrassSS = 303 Stainless Steel309SS = 309 Stainless Steel
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
NozzleInlet
Conn.NPT or
BSPT (M)
NozzleType Capac-
itySize
3/8
1/8
1/4
.37
.5
.7511.522.533.544.55
DIMENSION*
8686
StandardMaterials Material Code
no material code = BrassSS = 303 Stainless Steel
*Based on largest/heaviestversion of each type.
8686- 1/4 -SS 1 -120NozzleType
Mate-rial
Code
Capac-ity
Size
SprayAngle
InletConnec-
tionPipe Size
DESIGN FEATURES
PERFORMANCE DATA
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
DESIGN FEATURES
ORDERING INFORMATION
ORDERING INFORMATION
1/2 BA - SS 25NozzleType
MaterialCode
Capac-ity
Size
InletConnec-
tionPipe Size
QQQ
E\´„Q\ˆT\´„QQ\Á‰U\´„Q\‰
QO\Á‰
Q\‰QO\Á‰WE\Á‰U\ŒÁEE\Á‰
E\´„O\Á‰E\ŒÁQE\Á‰Q\‰O\´„QO\Á‰
E\ˆE\ˆE\ˆE\ˆE\ˆ
BodyInlet
Diam.Nom.Inches
CAPACITY(gallons per minute)
5psi
10psi
20psi
40psi
60psi
100psi
.21
.35
.57
.721.11.41.8
1.82.12.83.54.2
.30
.50
.801.01.52.02.5
2.53.04.05.06.0
.42
.701.11.42.12.83.5
3.54.25.77.18.5
.601.01.62.03.04.05.0
5.06.08.0
10.012.0
.731.22.02.43.74.96.1
6.17.39.8
12.314.7
.951.62.53.14.76.37.9
7.99.5
12.615.819.0
7psi
20psi
80psi
OrificeDiam.Nom.Inches
CAPACITY(gallons per minute)
5psi
10psi
20psi
40psi
60psi
80psi
100psi
.265.35.53.711.11.41.82.12.52.83.23.5
.375.50.751.01.52.02.53.03.54.04.55.0
.53
.701.11.42.12.83.54.25.05.76.47.1
.751.01.52.03.04.05.06.07.08.09.0
10.0
.921.21.82.53.74.96.17.38.69.8
11.012.3
1.11.42.12.84.25.67.18.59.9
11.312.714.2
1.21.62.43.24.76.37.99.5
11.012.614.215.8
A B CHex Hex Approx.
U\ŒÁ" Q\„" 1E\ŒÁ"
O\ŒÁ" T\ˆ" 1T\ŒÁ"
QE\ŒÁ" U\ˆ" 1E\‰"
NPT or NetBSPT A B C WeightSize3⁄8 WQ\´„" 1O\ŒÁ" 1Q\„" 4 oz.1⁄2 1" 2" 2O\´„" 9Q\„ oz.
Material Material Codeno material code = Brass
SS = Cast 316 Stainless Steel
TEF = TEFLONPVC = Polyvinyl Chloride
Q
Q
threaded/round1⁄4)-4) NPT or BSPT (M)
C17
GE
NE
RA
LP
UR
PO
SE
HO
LLO
W C
ON
E
COMPACT, ONE PIECE, LARGE FLOW RATEHOLLOW CONE SPRAY NOZZLES
BSJthreaded/flats
1⁄4)-4) NPT or BSPT (M)
BSJthreaded/hex
1⁄4)-2) NPT or BSPT (M)
BSJ
ⓦ Flue gas desulphurization
ⓦ Gas cooling
ⓦ Evaporative cooling
ⓦ Dust suppression
The Type BSJ nozzle producesa hollow cone spray pattern withspray angles ranging from 50° toan extra wide angle of 180°.These compact nozzles permitmaximum liquid throughput for agiven pipe size, and the freepassage design minimizesclogging. The compact size canbe installed or retrofitted on mostpipe systems, available in NPTor BSPT (M) threads.
Flow capacity at 40 psi (3 bar)ranges from 1.4 to 1050 gpm(5.5 to 4140 l/min.).
Sizes 1⁄4) to 2) are available inbrass, cast 316 stainless steel,and TEFLON or PVC materials.Brass version is available withhex design. Stainless steel withflats. TEFLON and PVC nozzleswith rounded design. In thelarger 3) and 4) sizes, bothbrass and stainless steel areavailable with “flats” only.
They can also be produced froma wide variety of other materialsfor specific applications.
ⓦ Pressure Regulators
ⓦ Control Valves
ⓦ Solenoid Valves
ⓦ Swivel Connectors
SEE SECTION G FORCOMPLETE INFORMATION.
COMPLETE NOZZLENUMBER
1/4 BSJ - SS 120 07NozzleType
MaterialCode
SprayAngle
Capac–ity
Size
PipeSize
Pipe SizeNPT or
BSPT (M)
CapacitySize
50° 60° 90° 120° 180°
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
1/4
3/8
1/2
3/4
1
1-1/2
2
3
4
Adjustable Ball Fittings
Split-Eyelet Connector
**At higher pressures, Brass and Cast 316 Stainless Steel nozzles are required.
Other Accessories
SPRAY NOZZLES
DESIGN FEATURES
ACCESSORIES
ORDERING INFORMATION
PERFORMANCE DATA
COMMON APPLICATIONS
NozzleLength
OrificeDiam.
FreePassageDiam.
CAPACITY(gallons per minute)
10psi
20psi
40psi
100psi
400**psi
.71.32.03.04.05.38.2
12.016.4
213447648296
140178256336525
.991.82.84.25.77.5
11.617.0
2330486691
116136198252362475743
1.42.64.06.08.0
10.616.4
2433426894
128164192280356512672
1050
2.24.16.39.5
12.616.8
26385266
108149202259304443563810
10601660
4.48.2
12.619.0
25345276
104133215297405519607885
1125162021203320
07 3⁄32) 3⁄32)13 1⁄8) 1⁄8)20 5⁄32) 1⁄8)30 3⁄16) 1⁄8)40 7⁄32) 1⁄8)53 1⁄4) 1⁄8)82 5⁄16) 1⁄8)
120 3⁄8) 3⁄16)164 7⁄16) 3⁄16)
210 1⁄2) 3⁄16)
340 5⁄8) 1⁄4)470 3⁄4) 1⁄4)640 7⁄8) 5⁄16)820 1) 5⁄16)960 11⁄8) 5⁄16)
1400 13⁄8) 7⁄16)1780 11⁄2) 7⁄16)
2560 13⁄4) 9⁄16)3360 2) 9⁄16)
5250 21⁄2) 5⁄8)
17⁄8)
17⁄8)
21⁄2)
23⁄4)
35⁄8)
43⁄8)
67⁄8)
8)
9)
Spray Angle at 10 psi
C18
GE
NE
RA
LP
UR
PO
SE
HO
LLO
W C
ON
E
ConnectionSize
CapacitySize
60° 90° 120° 180°
ⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦ
ⓦⓦ
2)Flange
3)Flange
4) Flange
HOLLOW CONE FLANGE-TYPE NOZZLES
BFSJ2), 3) & 4) sizes
ⓦ Flue gas desulphurization
ⓦ Dust supression
ⓦ Gas cooling
Type BFSJ (hollow cone) flange-type nozzles feature tip construc-tion of reaction-bonded siliconcarbide mounted on a fiberglass-reinforced polyester flange.Other materials available onspecial order. These nozzles areavailable with 2), 3) and 4) flangeconnections. Nozzle flow rates
at 10 psi (0.7 bar) range from 140 gpm (535 l/min) to 525 gpm(2000 l/min). Spray angles (2) size)from 60° to 180°; (3) and 4) sizes),60° to 120°.
These large capacity nozzlesprovide effective performance formany pollution control, cooling,or aeration applications.Clogging is minimal due to thelarge free passage design.
They are designed withprecision impact blade anglesthat distribute the spray dropletsfor excellent coverage. Theflange-type nozzles can becustom-sized for your installationand are available in severalabrasion-resistant materials.
COMPLETE NOZZLENUMBER
4 BFSJ - SILCRB 90 5250NozzleType
MaterialCode
SprayAngle
Capac-ity
Size
FlangeInletConn.Size
SPRAY NOZZLE
Standard MaterialsReaction-bonded Silicon Carbide withF.R.P. Flange.
Material CodeSILCRB = Reaction-bonded
Silicon Carbide
PERFORMANCE DATA
DESIGN FEATURES
ORDERING INFORMATIONCOMMON APPLICATIONS
OrificeDiam.
FreePassageDiam.
Spray Angle at 10 psi CAPACITY(gallons per minute)
10psi
20psi
40psi
100psi
400psi
140178256336525
198252362475743
280356512672
1050
443563810
10601660
8851125162021203320
1400 13⁄8) 7⁄16)1780 11⁄2) 7⁄16)
2560 13⁄4) 9⁄16)3360 2) 9⁄16)
5250 21⁄2) 5⁄8)
FULL CONE
INDEXFullJet®
Standard Spray Angle G, GG, H, HH...C20,C22,C23Wall Mounted GD, GGD, HD......... C21-C23Angle Type GA, GGA................ C21-C23Square Spray G-SQ, GG-SQ,
H-SQ, HH-SQ........ C24, C25Oval Spray G-VL, GG-VL.................. C26Vaneless GANV, GGANV............... C27
DistriboJet® R, RR, RF.............. C28, C29
FullJet®
Narrow Angle -15° G15, GG15, H15............ C30Narrow Angle -30° G30, GG30, HH30......... C31Wide Angle G-W, GG-W,
H-W, HH-W............. C32-C34Square Spray, Wide H-WSQ,
HH-WSQ............... C33, C34Angle Type GA-W, GGA-W...... C33, C34
FullJet®
KYNAR Series HH-KY............................ C35
SpiralJet®
SpiralJet® Threaded HHSJ............................. C36SpiralJet® Flanged HFSJ.............................. C37
SpiralJet®
Extra Large Free Passage HHSJX.............................C38
SPRAY NOZZLES
AIR WASHERDUST CONTROL
C20
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
STANDARD SPRAY ANGLESTANDARD TYPE
COMMON APPLICATIONS ORDERING INFORMATION
DESIGN FEATURES
Gremovable cap & vane
1⁄8"-1⁄2" NPT or BSPT (F)
GGremovable cap & vane
1⁄8"-1⁄2" NPT or BSPT (M)
Hone-piece body
3⁄4"-1" NPT or BSPT (F)
Hremovable vane/
cast body11⁄4"- 8" NPT or BSPT (F)
HHone-piece body
1⁄4"-1" NPT or BSPT (M)
STANDARDSPRAY NOZZLE
1/4 G - SS 10NozzleType
InletConnectionPipe Size
MaterialCode
CapacitySize
ⓦ Washing & rinsing processes
ⓦ Quenching & cooling of coke,primary metals and other materials
ⓦ Suppression of fugitive dust in the processing of bulk ores, coal, limestone, sandand gravel
ⓦ Scrubbing, washing andcooling of flue gases toremove fly ash and otherproducts of combustion
ⓦ Deluging combustible materi-als and storage tanks for firesuppression and prevention
ⓦ Breaking up and deaeratingfoam
ⓦ Creating and dispersingdroplets in chemical reactionprocessing
SPRAY NOZZLES
Standard FullJet nozzles featurea solid cone-shaped spraypattern with a round impact areaand spray angles of 43° to 106°.
FullJet nozzles produce a uniformspray of medium to large-sizeddroplets over a wide range of flowrates and pressures. This uniform
spray distribution results from aunique vane design with largeflow passages and superiorcontrol characteristics.
FullJet nozzles are precision-engineered and manufactured toexacting dimensions to ensureaccurate and reliable perfor-
mance. They produce excellentresults in spraying applicationsrequiring complete coverage ofan area or zone.
G and GG series FullJet nozzlesfeature removable caps andvanes and are well-suited forheader or manifold installations.Their design makes it possible toremove the working end (cap &vane) from the nozzle for inspec-tion or cleaning, without havingto remove the nozzle body fromthe header.
H series Standard FullJetnozzles (over 1") have vanesthat are held in place with setscrews and are easily removedwhen necessary.
HH series standard FullJet noz-zles have non-removable vanes.
HF series FullJet nozzles with4", 5", 6", 8" and 10" flangeconnections are also available.
GAS LINE
C21
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
Wall Mounted FullJet nozzlesfeature a solid cone-shapedspray pattern with a uniformround impact area and the sameperformance as Standard FullJetnozzles of similar size andcapacity.
Their wall mounting connectionis a male type pipe connectionthe same size as the inletconnection.
ACCESSORIES
GD GGD HD GGAGA
WALL MOUNTED ANGLE TYPE
ⓦ Spraying into chemical reaction vessels
ⓦ Spraying into storage tanksand bins
ⓦ Spraying into steam and gas lines
ⓦ Pressure Gaugesⓦ Pressure Regulatorsⓦ Pressure Relief Valvesⓦ Control Valvesⓦ Solenoid Valvesⓦ Check ValvesSEE SECTION G FORCOMPLETE INFORMATION.
The wall mounting feature isuseful for installations where thepiping for the nozzles must beinstalled on the exterior of theroom, vessel, or pipeline intowhich the nozzle will spray.
GD and GGD series WallMounted FullJet nozzles featureremovable vanes and caps.
HD series Wall Mounted FullJetnozzles feature removablevanes for sizes 1!\›" through 3".
Angle Type FullJet nozzlesfeature a solid cone-shapedspray pattern with a roundimpact area with the sameperformance as Standard FullJetnozzles…while their right angledesign causes the spray to beprojected from the nozzle at anaxis 90° from the axis of thenozzle inlet.
Angle Type FullJet nozzles allhave removable caps and vanesfor convenient inspection orcleaning.
The right angle design is usefulwherever FullJet nozzles mustbe installed on a pipe extensionover the center of a sprayingzone or in a side-tapped headeror manifold.
COMMON APPLICATIONS
DESIGN FEATURES
DESIGN FEATURES
FURNACEEXHAUST
LINE
Split-Eyelet Adjustable TW Strainer Other AccessoriesConnector Ball Fittings
FullJet Nozzle Wall Mounted
Wall
➚
➚removable cap & vane
1⁄8"-1⁄2" NPT or BSPT (F)
removable cap & vane1⁄8"-1⁄2" NPT or BSPT (M)
one-piece body3⁄4"- 3" NPT or BSPT (F)
removable cap & vane1⁄8"-1⁄2" NPT or BSPT (M)
removable cap & vane1⁄8"-1⁄2" NPT or BSPT (F)
C22
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦ
ⓦⓦⓦⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
NozzleInlet
Conn.NPT orBSPT
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
5
6
8
10
NOZZLE TYPE
STANDARD TYPE WALLMOUNTED
(F)Conn.
G H GG HH HF GD HD GGD GA GGA
(F)Conn.
(F)Conn.
(M)Conn.
(M)Conn.
(M)Conn.*
ANGLE Capac-ity
Size
52°43°52°43°77°52°69°45°58°69°45°64°76°87°48°64°72°88°91°48°67°89°48°67°72°78°89°48°64°66°77°90°48°72°74°91°49°72°75°78°83°98°49°72°76°79°86°95°49°81°86°92°
102°87°92°97°
102°89°93°97°
102°87°92°97°
102°78°86°92°
102°106°78°86°97°
103°
58°65°50°65°50°84°65°74°50°67°74°50°67°80°90°50°67°75°91°94°50°70°92°50°68°81°90°92°50°67°70°80°93°50°74°76°94°50°74°77°80°85°
100°50°74°78°82°88°97°50°84°89°95°
105°90°95°
100°105°91°96°
100°105°90°95°
100°105°80°88°95°
105°110°80°89°
100°106°
53°59°46°59°46°79°59°68°46°61°68°46°61°73°82°46°61°68°83°86°46°63°84°46°62°82°94°84°44°58°60°70°81°44°64°66°82°44°64°68°70°75°86°44°64°68°72°77°84°44°73°77°83°89°70°83°87°91°80°84°87°91°78°83°87°91°70°77°83°91°96°70°77°87°92°
SPRAYANGLE
* Flange Connection** Foreign matter with maximum diameter as listed can pass through nozzle without clogging
PERFORMANCE DATA
1⁄323⁄643⁄641⁄161⁄165⁄645⁄643⁄32
3⁄327⁄641⁄8
7⁄649⁄645⁄323⁄16
9⁄643⁄16
13⁄641⁄4
17⁄64
3⁄161⁄43⁄8
15⁄6421⁄64
3⁄815⁄3215⁄32
19⁄643⁄8
27⁄6431⁄6419⁄32
3⁄81⁄2
9⁄1623⁄32
1⁄211⁄16
3⁄453⁄6415⁄16
11⁄819⁄32
7⁄831⁄32
11⁄811⁄811⁄4
3⁄413⁄32
13⁄16
19⁄32
13⁄8111⁄16
155⁄64
2 25⁄32
17⁄825⁄64
211⁄16
227⁄32
213⁄32
223⁄32
31⁄32
37⁄32
23⁄435⁄32
319⁄32
41⁄32
47⁄8311⁄32
331⁄32
451⁄64
55⁄16
.025
.025
.040
.040
.050
.040
.050
.0501⁄161⁄161⁄16
3⁄323⁄327⁄647⁄64
1⁄81⁄8
9⁄649⁄645⁄32
11⁄6411⁄6413⁄64
7⁄327⁄327⁄327⁄321⁄41⁄41⁄41⁄41⁄4
5⁄16
11⁄3211⁄3211⁄3213⁄32
7⁄167⁄167⁄167⁄169⁄169⁄16
9⁄169⁄169⁄169⁄16
11⁄1611⁄16
11⁄1611⁄1611⁄1611⁄1613⁄16
3⁄47⁄811
11⁄811⁄813⁄813⁄815⁄815⁄813⁄413⁄417⁄817⁄817⁄821⁄421⁄421⁄221⁄225⁄825⁄8
.14
.22
.25
.28
.36
.44
.47
.73
.91
.691.11.51.61.21.82.32.93.62.13.46.03.66.06.98.6
10.25.18.7
10.212.017.28.7
13.717.2
2615263034435121435160697736697786
102137154172180213240272281301341387412425512600685772685850
10301110
.13
.17
.26
.30
.33
.42
.52
.55
.851.1.801.31.71.91.42.12.73.24.22.54.07.04.27.08.0
10.012.06.0
10.012.014.0
2010.016.0
2030173035405060255060708090428090
100120160180200210250280320330350400450480500600700800900800
100012001300
.10
.15
.20
.30
.35
.39
.50
.61
.651.0
1.25.951.52.02.21.62.53.24.05.03.04.78.35.08.39.4
12.014.27.1
12.014.116.5
2412.018.9
24362036424759713059718395
1085095
108119142189212238250298330378390413470531569590708830949
1080949
118014201550
.14
.21
.28
.42
.48
.54
.69
.84
.891.41.71.32.12.83.02.23.54.45.56.94.16.5
11.46.8
11.413.016.519.49.7
16.519.4
2333
16.5263348274857648296418196
11513214869
132148164194260292325345408452519534568643730780815960
1150132014801320163019702130
.17
.25
.34
.50
.58
.65
.821.01.11.72.11.62.53.43.72.74.25.36.68.24.97.8
13.88.2
13.815.619.9
2411.819.9
242739
19.93139583358687799
1184997
11813816018082
160180198235311351390420490546621640680770880940985
11801380160018001600197023802570
.19
.29
.38
.57
.67
.74
.951.11.31.92.41.82.93.84.23.14.86.17.69.55.68.9
15.89.4
15.817.8
2327
13.5232732442335446638667688
11314056
11214015818320294
183202228269354403443480561625710732775883
10101080113014001580183020201830226027202930
.23
.35
.46
.69
.81
.891.21.41.52.42.92.23.54.65.13.75.87.49.2
11.66.8
10.719.111.519.1
212732
16.32733385327435380458093
10813516368
135163191220248105220248274324428485533580678751858885932
108012301310137016301910220024802200274032903530
.26
.40
.53
.79
.921.01.31.61.72.73.32.54.05.35.84.36.78.5
10.613.27.8
12.422
13.122253137
18.631374161314961915291
10812415618678
155186219253282131253282314370487552610665775860980
10201080124014001490156018602190253028202530313037504050
.30
.44
.59
.881.01.11.51.81.93.03.62.84.45.96.44.77.49.4
11.814.78.6
13.724
14.5242735412135414868355468
10263
10212113717320386
172203243280316145280316349411540615675740860955
110011401210137015501670173020302430280031602800347041704500
.36
.53
.701.11.3
1.8
2.33.6
3.45.3
7.85.78.9
11.314.3
10.416.6
2917.6
293342502542505882426682
12376
123147166210250104208250294339383176339383419500655745820895
10401150133013801470166018802040210025002940339038303390420050205430
OrificeDiam.Nom.Inches
Maxi-mumFree
PassageDiam.**Inches
CAPACITY(gallons per minute)
5psi
7psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
7psi
20psi
80psi
GD
GAG
C23
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
ORDERING INFORMATIONMATERIALS
DIMENSIONS & WEIGHTS
STANDARDSPRAY NOZZLE
1/4 G - SS 10NozzleType
InletConnectionPipe Size
MaterialCode
CapacitySize
NozzleType
GG
HH
HCast
HF
HBar Stock
NozzleInlet Conn.
NPT orBSPT
NozzleType
GGA
NozzleInlet
Conn.NPT orBSPT
NozzleType
GGD
HD
NozzleInlet Conn.
NPT orBSPT
Based on largest/heaviest version of each type. ANGLE TYPE
WALL MOUNTED
STANDARDMATERIAL MATERIAL
CODE
WALLMOUNTED
ANGLE TYPE
G GG H HH HF
PPPPP
PPPPP
PPPPPP
PPPPP
P
P
P
PPP
PPP
PPP
PPP
PPP
GD GGD HD GA GGA
BRASSMILD STEEL303 STAINLESS STEEL316 STAINLESS STEELPVCCAST IRON
(none)I
SS316 SS*
PVCI
*Bar stock nozzles only; SS in material code = 316 stainless steel for cast nozzles.
Q\ˆ 1U\´„" O\ŒÁ" hex. 1 oz.Q\‰ 1QT\´„" QQ\ŒÁ" hex. 1Q\„ oz.E\ˆ 1QE\ŒÁ" QE\ŒÁ" hex. 2Q\„ oz.Q\„ 2Q\‰" 1" hex. 6 oz.
Q\ˆ 1WT\Á‰" O\ŒÁ" hex. 1 oz.Q\‰ 1EO\Á‰" QQ\ŒÁ" hex. 1Q\„ oz.E\ˆ 1QE\ŒÁ" QE\ŒÁ" hex. 2Q\„ oz.Q\„ 1QE\Á‰" 1" hex. 4E\‰ oz.
Q\ˆ 1WO\Á‰" O\ŒÁ" hex. 1 oz.Q\‰ 1RT\Á‰" QQ\ŒÁ" hex. 1Q\„ oz.E\ˆ 1WU\´„" QE\ŒÁ" hex. 2Q\„ oz.Q\„ 2QQ\Á‰" 1" hex. 4Q\„ oz.
Q\ˆ 1O\´„" O\ŒÁ" hex. E\‰ oz.Q\‰ 1O\ŒÁ" QQ\ŒÁ" hex. 1Q\„ oz.E\ˆ 1WU\´„" QE\ŒÁ" hex. 2Q\„ oz.Q\„ 2U\´„" 1" hex. 6 oz.
Q\‰ WO\´„" QU\´„" dia. Q\„ oz.E\ˆ 1E\ŒÁ" WQ\´„" dia. 1 oz.Q\„ 1E\ˆ" QE\ŒÁ" dia. 1Q\„ oz.E\‰ 1QO\´„" 1Q\ŒÁ" dia. 3Q\„ oz.1 2E\´„" 1T\ŒÁ" dia. 7 oz.
4 8Q\ˆ" 9" dia. 27 lbs.5 10O\ŒÁ" 10" dia. 36 lbs.6 12T\ˆ" 11" dia. 49 lbs.8 16T\ˆ" 13Q\„" dia. 106 lbs.10 20E\‰" 16" dia. 173 lbs.
1Q\‰ 3U\ŒÁ" 2Q\ŒÁ" dia. 1Q\‰ lbs.1Q\„ 4Q\ŒÁ" 2T\ŒÁ" dia. 1E\‰ lbs.2 5U\ŒÁ" 3" dia. 3E\‰ lbs.
2Q\„ 6U\ˆ" 3U\ŒÁ" dia. 4E\‰ lbs.3 7WE\´„" 4Q\ˆ" dia. 6 lbs.4 9U\ˆ" 5U\ŒÁ" dia. 18 lbs.5 12Q\‰" 6E\‰" oct. 38 lbs.6 14E\ˆ" 8" oct. 53 lbs.8 18Q\„" 9Q\„" oct. 92 lbs. E\‰ 2Q\ˆ" 1Q\‰" dia. 6 oz.
1 2QQ\ŒÁ" 1Q\„" dia. 14 oz.1Q\‰ 3E\ˆ" 1U\ˆ" dia. 1Q\„ lbs.1Q\„ 4Q\ŒÁ" 2Q\‰" dia. 2Q\„ lbs.2 5Q\ŒÁ" 2E\‰" dia. 4Q\„ lbs.
2Q\„ 6Q\‰" 3Q\‰" dia. 7 lbs.3 7T\ŒÁ" 4" dia. 12E\‰ lbs.
E\‰ 2E\ŒÁ" 1Q\‰" dia. 7Q\‰ oz.1 2E\‰" 1Q\„" dia. 13 oz.
A B NetWeight
Q\ˆ QQ\ŒÁ" T\ˆ" O\ŒÁ" sq. EQ\´„" WO\´„" 1Q\„ oz.Q\‰ U\ˆ" WT\´„" QQ\ŒÁ" sq. 1U\´„" 1T\´„" 2 oz.E\ˆ 1" U\ˆ" QE\ŒÁ" sq. 1U\ŒÁ" 1O\´„" 3Q\‰ oz.Q\„ 1QU\´„" 1Q\ŒÁ" 1" sq. 2Q\´„" 1O\ŒÁ" 6Q\‰ oz.
Q\ˆ QQ\ŒÁ" WQ\´„" O\ŒÁ" sq. EQ\´„" QT\ŒÁ" 1Q\„ oz.Q\‰ U\ˆ" QE\ŒÁ" QQ\ŒÁ" sq. 1Q\‰" 1T\´„" 2 oz.E\ˆ 1" WO\´„" QE\ŒÁ" sq. 1U\ŒÁ" 1T\ŒÁ" 3Q\‰ oz.Q\„ 1QU\´„" 1Q\ˆ" 1" sq. 2Q\´„" 1T\ˆ" 6Q\‰ oz.
A B D LC NetWeight
A B NetWeight
C24
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
Square Spray FullJet nozzlesfeature a solid cone-shapedspray pattern with a squareimpact area and spray angles of40° to 105°.
Square Spray FullJets produce a uniform spray of medium tolarge droplets across their entirespray area over a wide range ofspraying pressures and flowrates. This uniform spray
distribution is the result of aunique vane design…with largeflow passages and superiorspray control characteristics.
They are well-suited for installa-tions requiring completecoverage of rectangular areas or spray zones.
G-SQ and GG-SQ series SquareSpray FullJet nozzles featureremovable caps and vanes…toallow the removal and inspection
of these components withoutremoval of the nozzle body fromits header or manifold.
H-SQ series nozzles featureremovable vanes.
NOTE: The sides of the squareflat spray pattern are offsetapproximately 20° to 25° fromthe groove positions of thenozzles, depending uponspraying pressure and spraydistance. Write for details.
SQUARE SPRAY
G-SQremovable cap & vane
1⁄8"-1⁄2" NPT or BSPT (F)
GG-SQremovable cap & vane
1⁄8"-1⁄2" NPT or BSPT (M)
H-SQone-piece body
1" NPT or BSPT (F) bar stock11⁄4"-6" NPT or BSPT (F) cast-type
HH-SQone-piece body
1⁄8"- 3⁄4" NPT or BSPT (M)
ⓦ Cooling and quenching
ⓦ Product washing
ⓦ Air and gas washers
ⓦ Scrubbers
ⓦ Liquor washers
ⓦ Dust control
ⓦ Fire protection
SPRAY NOZZLES
RINSE TANK
DESIGN FEATURES
COMMON APPLICATIONS
ACCESSORIES
ⓦ Pressure Gaugesⓦ Pressure Regulatorsⓦ Pressure Relief Valvesⓦ Control Valvesⓦ Solenoid Valvesⓦ Check ValvesSEE SECTION G FORCOMPLETE INFORMATION.
Split-Eyelet Adjustable TW Strainer Other AccessoriesConnector Ball Fittings
H
G
HH
GG
C25
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
ORDERING INFORMATION
ⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
NozzleInlet
Conn.NPT orBSPT
NozzleInlet
Conn.NPT orBSPT
NOZZLE TYPE
G H GG HH
CapacitySize
1/8
1/4
3/8
1/2
3/41
1-1/41-1/2
2
2-1/2
56
3.6SQ4.8SQ
6SQ10SQ12SQ
14.5SQ18SQ29SQ36SQ50SQ
106SQ177SQ230SQ290SQ360SQ480SQ490SQ590SQ950SQ
2980SQ5690SQ
SPRAYANGLE
40°48°60°62°70°78°71°71°78°71°78°78°73°66°70°79°62°75°81°89°102°
52°63°66°67°75°82°75°75°82°75°80°80°77°70°74°82°67°78°84°91°105°
47°57°60°61°68°75°68°68°75°68°73°73°70°64°67°74°61°71°76°83°95°
(F) (M)Conn. Conn.
Standard Materials Material Codeno material code = BrassI = Mild SteelSS = 303 Stainless Steel (Bar Stock)SS = 316 Stainless Steel (Cast Type)316SS = 316 Stainless Steel (Bar Stock)PVC = Polyvinyl Chloride
NozzleInlet
Conn.NPT orBSPT
NozzleInlet
Conn.NPT orBSPT
Based on largest/heaviest version of each type.
STANDARDSPRAY NOZZLE
1/4 G - SS 12SQNozzleType
CapacitySize
MaterialCode
InletConnectionPipe Size
NozzleInlet
Conn.NPT orBSPT
Q Q Q QQ Q Q QQ Q Q
QQ Q Q
Q
A
Q\ˆ 1U\´„" O\ŒÁ" hex. 1 oz.Q\‰ 1QT\´„" QQ\ŒÁ" hex. 1Q\„ oz.
B NetWeight
.050
.050
.050Q\ŒÁQ\ŒÁQ\ŒÁ
E\´„
Q\ˆQ\ˆ
QQ\Á‰
U\´„
Q\‰
QQ\´„
U\ŒÁU\ŒÁU\ŒÁ
O\ŒÁO\ŒÁQQ\ŒÁ
1Q\ˆ
1E\‰
Q\ŒÁT\Á‰E\´„
U\Á‰Q\ˆ
.154T\´„
U\´„Q\‰
QU\Á‰
WT\Á‰
Q\„
O\ŒÁ
EO\Á‰QQ\ŒÁTE\Á‰
WT\´„U\ˆ
1Q\ˆ
1U\ˆ
3U\´„
Max.Free
PassageDiam.Inches
CAPACITY(gallons per minute)
5psi
7psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
.26
.34
.43
.72
.861.11.32.12.63.77.6
12.816.6
212634354369
213412
.31
.40
.51
.851.01.21.52.53.14.38.9
15.019.5
253140415080
250480
.36
.48
.601.01.2
1.451.82.93.65.0
10.617.7
23293648495995
298569
.50
.66
.831.41.72.02.54.05.07.0
14.525324050666781
132408780
.60
.801.01.72.02.43.04.86.08.4
17.530384860808199
160490940
.69
.911.11.92.32.83.45.56.99.620344455699192
113183561
1080
.831.11.42.32.83.34.16.78.3
11.52441536783
110113136220678
1310
.951.31.62.63.23.84.77.69.5
13.22847617695
125128155253775
1490
1.11.41.82.93.54.25.38.5
10.514.6
31526785
105138142173280860
1670
1.31.72.13.54.35.16.4
10.013.017.6
376380
100130166170208339
10402040
7psi
20psi
80psi
OrificeDiam.Nom.Inches
A
Q\ˆ U\ˆ" Q\„" dia. Q\„ oz.Q\‰ WO\´„" QU\´„" dia. Q\„ oz.E\ˆ 1E\ŒÁ" WQ\´„" dia. 1 oz.Q\„ 1E\ˆ" QE\ŒÁ" dia. 1Q\„ oz.E\‰ 1QO\´„" 1Q\ŒÁ" dia. 3Q\„ oz.
B NetWeight
A
1 2E\‰" 1Q\„" dia. 13 oz.1Q\‰ 3U\ŒÁ" 2Q\ŒÁ" dia. 1Q\‰ lbs.1Q\„ 4Q\ŒÁ" 2T\ŒÁ" dia. 1E\‰ lbs.2 5U\ŒÁ" 3" dia. 3E\‰ lbs.
2Q\„ 6U\ˆ" 3U\ŒÁ" dia. 4E\‰ lbs.5 12Q\‰" 6E\‰" oct. 38 lbs.6 14E\ˆ" 8" oct. 53 lbs.
B NetWeight
A
Q\ˆ 1O\´„" O\ŒÁ" hex. E\‰ oz.Q\‰ 1O\ŒÁ" QQ\ŒÁ" hex. 1Q\„ oz.
B NetWeight
C26
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
OVAL SPRAY
G-VLremovable cap and vane
3⁄8" NPT or BSPT (F)
GG-VLremovable cap and vane
3⁄8" NPT or BSPT (M)
ⓦ Pressure Regulator
ⓦ Pressure Relief Valves
ⓦ Solenoid Valves
ⓦ Control Valves
ⓦ TW Strainers
SEE SECTION G FORCOMPLETE INFORMATION.
SPRAY NOZZLES
Oval Spray FullJet nozzlesfeature a solid cone-shapedspray pattern with an oval impactarea that has a width approxi-mately one half of its length.
This type of FullJet spray nozzleis especially well-suited forintensive cooling applicationsthat require a heavy spray to beprojected between rollers to thetarget surface.
Oval Spray FullJet nozzles comewith removable caps and vanesfor more convenient removal andinspection of the working end ofthe nozzle in header installa-tions…where it is often desirableto leave the nozzle body in place.
FullJet nozzles have a uniqueinternal vane with large flowpassages and superior spraypattern control characteristics.Standard material is brass.
ⓦⓦⓦⓦ
ⓦⓦⓦⓦ
NozzleInlet
Conn.NPT orBSPT
3/8
CapacitySize
4.9VL6.5VL8.1VL9.2VL
A° B° A° B° A° B° A° B°
104°103°102°103°
66°64°64°65°
90°95°
100°100°
60°60°65°65°
86°85°84°86°
52°50°50°51°
83°81°80°81°
47°45°45°46°
SPRAY ANGLESNOZZLE TYPE(F)
Conn.(M)
Conn.G GG
Material Material Codeno material code = Brass
Based on largest/heaviest version of each type. STANDARDSPRAY NOZZLE
3/8 G - 4.9VLNozzleType
CapacitySize
InletConnectionPipe Size
ORDERING INFORMATION
DESIGN FEATURES
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
ACCESSORIES
Split-Eyelet Connector Pressure Gauge Other AccessoriesAdjustableBall Fittings Check Valve
Q Q
Max.Free
PassageDiam.Inches.040.050.050.050
CAPACITY (gallons per minute)
15psi
30psi
40psi
60psi
80psi
100psi
150psi
.59
.78
.981.1
.811.11.31.5
.931.21.51.7
1.11.51.82.1
1.31.72.12.4
1.41.92.32.7
1.72.32.83.2
15 psi 40 psi 100 psi 150 psi
Q\„" FLATS
1Q\„"
C27
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
VANELESS
ORDERING INFORMATION
DESIGN FEATURES
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
ACCESSORIES
GANVvaneless/removable cap 1⁄4"- 1⁄2" NPT or BSPT (F)
GGANVvaneless/removable cap 1⁄4"- 1⁄2" NPT or BSPT (M)
Other Accessories
ⓦ Swivel Connectors
ⓦ Check Valves
ⓦ Pressure Gauges
ⓦ Solenoid Valves
SEE SECTION G FOR COMPLETE INFORMATION.
SPRAY NOZZLES
Vaneless FullJet nozzles featurea solid cone-shaped spraypattern with a round impactarea; as well as completelyunrestricted internal flowpassages…with no vane.
Their coarse spray is projectedfrom the nozzle at an axis 90°from the axis of the nozzle inlet.
Vaneless FullJet nozzles arebest suited for applications
requiring a full cone spray pat-tern with coarser spray charac-teristics and/or greater freepassage dimensions through thenozzle than other FullJet nozzles.
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
NozzleInlet
Conn.NPT orBSPT
1/4
3/8
1/2
Capac-ity
Size
578
1011
1113162023262933
324048566472
68°68°75°75°75°
75°75°75°75°75°75°75°75°
85°85°85°85°85°85°
75°75°80°80°80°
85°85°85°85°85°85°85°85°
90°90°90°90°90°90°
82°82°85°85°85°
83°83°83°83°83°83°83°83°
95°95°95°95°95°95°
SPRAY ANGLENOZZLE TYPE(F)
Conn.(M)
Conn.GANV GGANV
Material Material Codeno material code = BrassSS = 303 Stainless Steel
NozzleType
GANV
GGANV
NozzleInlet Conn.
NPT orBSPT
Split-EyeletConnector
Pressure RegulatorControl Valve
PressureRelief Valve
STANDARDSPRAY NOZZLE
1/4 GANV - SS 10NozzleType
CapacitySize
MaterialCode
InletConnectionPipe Size
Based on largest/heaviest version of each type.
Q QQ Q
OrificeDiam.Nom.Inches
Max.Free
PassageDiam.Inches
U\Á‰Q\ˆT\´„T\´„T\´„
QQ\Á‰QQ\Á‰QQ\Á‰U\´„U\´„QT\Á‰QT\Á‰QO\Á‰
T\ŒÁT\ŒÁT\ŒÁWT\Á‰WT\Á‰WT\Á‰
T\Á‰E\´„U\Á‰Q\ˆO\Á‰
Q\ˆO\Á‰T\´„QQ\Á‰E\ŒÁQE\Á‰U\´„QT\Á‰
QE\Á‰QT\Á‰O\´„QO\Á‰WQ\Á‰WE\Á‰
CAPACITY (gallons per minute)
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
80psi
100psi
.35
.49
.57
.71
.78
.78
.921.11.41.61.82.12.3
2.22.83.44.04.55.1
.42
.59
.67
.84
.92
.921.11.31.71.92.22.42.8
2.73.34.04.75.46.0
.50
.70
.801.01.1
1.11.31.62.02.32.62.93.3
3.24.04.85.66.47.2
.61
.86
.981.21.3
1.31.62.02.42.83.23.64.0
3.94.95.96.97.88.8
.71
.991.11.41.6
1.61.82.32.83.33.74.14.7
4.55.76.87.99.1
10.2
.871.21.41.71.9
1.92.32.83.54.04.55.05.7
5.56.98.39.7
11.112.5
1.01.41.62.02.2
2.22.63.24.04.65.25.86.6
6.48.09.6
11.212.814.4
1.21.71.92.42.7
2.73.23.94.95.66.47.18.1
7.89.8
11.813.715.717.6
1.42.02.32.83.1
3.13.74.55.76.57.48.29.3
9.111.313.615.818.1
20
1.62.22.53.23.5
3.54.15.16.37.38.29.2
10.4
10.112.615.217.7
2023
7psi
20psi
80psi
Q\‰ O\ŒÁ" U\ˆ" E\‰" QT\ŒÁ" 1Q\‰" 2E\‰E\ˆ QQ\ŒÁ" EQ\´„" U\ˆ" 1Q\ˆ" 1QE\´„" 3E\‰Q\„ WT\´„" 1T\ŒÁ" 1" 1O\´„" 1QE\ŒÁ" 5T\ˆ
Q\‰ O\ŒÁ" U\ˆ" E\‰" QT\ŒÁ" 1Q\‰" 2Q\„E\ˆ QQ\ŒÁ" EQ\´„" U\ˆ" 1Q\ˆ" 1QE\´„" 3Q\„Q\„ WT\´„" 1E\ˆ" 1" 1O\´„" 1U\ˆ" 5E\ˆ
A Csq. D L
NetWeight
oz.B
C28
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
50°/65°/80°/95°
ORDERING INFORMATION
DESIGN FEATURES
DIMENSIONS & WEIGHTS
COMMON APPLICATIONS
ACCESSORIES
R2"-8" NPT or BSPT (F)
RR2"-8" NPT or BSPT (M)
RF4"-12" Flange
ⓦ Deluging or flooding with large volumes of liquid
ⓦ Quenching and cooling
ⓦ Fire protection
ⓦ Deaerating
ⓦ Chemical processing
SPRAY NOZZLES
DistriboJet series FullJet nozzlesfeature a solid cone-shapedspray pattern with a roundimpact area and spray anglesfrom 50° to 95°.
DistriboJet nozzles utilize aninternal vane…cast as part ofthe nozzle…with extra-large flowpassages and a large openorifice to assure non-cloggingoperation.
Their design allows an operating
range of 1-60 psi (0.07-4 bar)with a full cone spray patterndeveloping at 1 psi (0.07 bar).
DistriboJet nozzles produce verylarge droplets.
The 50° and 65° series havespecially designed groovedorifices for accurate flow rateand spray angle control withtheir narrow sprays. Thesegrooves are not necessary forthe 80° and 95° series, which
Based on largest/heaviest version of each type.
RNozzle
Inlet Conn.NPT orBSPT
RRNozzle
Inlet Conn.NPT orBSPT
RF FlangeSize
CHEMICAL PROCESSING TOWER
STANDARDSPRAY NOZZLE
2 RR - SS 50 45NozzleType
CapacitySize
MaterialCode
SprayAngle
InletConnectionPipe Size
Junction Box
See Page C6.
2 4U\ŒÁ" 2QT\ŒÁ" dia. 3 lbs.2Q\„ 5QT\´„" 3QT\´„" dia. 5Q\„ lbs.3 6Q\„" 4Q\ˆ" dia. 7Q\„ lbs.4 8Q\ˆ" 5" dia. 13Q\„ lbs.5 10Q\´„" 6E\ˆ" dia. 33 lbs.6 11QE\ŒÁ" 7T\ˆ" dia. 38Q\„ lbs.8 15T\ŒÁ" 9Q\„" dia. 75 lbs.
A NetWeightB
2 3Q\‰" 2E\ˆ" dia. 2 lbs.2Q\„ 4" 2U\ˆ" dia. 5Q\‰ lbs.3 4U\ˆ" 3Q\„" dia. 5E\‰ lbs.4 6Q\„" 4Q\„" dia. 10 lbs.5 8Q\ˆ" 5O\ŒÁ" dia. 25 lbs.6 9E\‰" 6T\ˆ" dia. 29 lbs.8 13" 8T\ˆ" dia. 56 lbs.
A NetWeightB
4 6O\ŒÁ" 8U\ˆ" dia. 23 lbs.5 8E\ŒÁ" 9U\ˆ" dia. 39 lbs.6 9QE\ŒÁ" 10U\ˆ" dia. 45 lbs.8 13" 13E\ˆ" dia. 85 lbs.12 19Q\„" 19" dia. 110 lbs.
A NetWeightB
C29
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
PERFORMANCE DATA
NozzleInlet
Conn.NPT orBSPT
2
2-1/2
3
4
5
6
8
12
NOZZLE TYPE(F)
Conn.R
(M)Conn.
RR
FlangeConn.
RF
Capac-ity
Size
45454560607070709090
110110110140140160160160190190190250250250250250280280280380380360360360400400400560560650650650750750750850850
1000140016001700180020002200
50° 65° 80° 95°
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦ
50° 65° 80° 95° 50° 65° 80° 95°
Material Codeno material code = BrassI = Cast IronSS = 316 Stainless Steel
Standard MaterialsQ Q Q Q Q Q Q Q Q Q Q QQ Q Q Q Q Q Q Q Q Q Q QQ Q Q Q Q Q Q Q Q Q Q Q
InnerOrificeDiam.Nom.Inches
OrificeDiam.Nom.Inches
1O\Á‰
1WU\Á‰
1U\ŒÁ
1RO\Á‰
1TE\Á‰
2Q\‰
2Q\ˆ
2E\ˆ
3Q\Á‰
2WQ\´„
2TT\Á‰
3WQ\´„
3E\ŒÁ
3QE\´„
4Q\„
4QQ\´„
4WT\´„
5T\ŒÁ
6Q\‰
6QO\Á‰
6TT\Á‰
7E\ŒÁ
7EE\Á‰
8U\´„
9E\Á‰
11Q\ŒÁ
1QU\Á‰
1QT\Á‰
1QQ\´„
1O\ŒÁ
1ET\Á‰
1RE\Á‰
1EQ\´„
1U\ˆ
2Q\Á‰
2E\Á‰
2QE\Á‰
2T\ˆ
2WE\Á‰
2EE\Á‰
2QT\´„
2WQ\´„
3U\´„
2TE\Á‰
3Q\Á‰
2EQ\´„
3E\ŒÁ
3TO\Á‰
3TQ\Á‰
4Q\ŒÁ
4E\Á‰
4QE\´„
4E\‰
CAPACITY(gallons per minute)
1psi
3psi
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
27
36
42
54
66
84
97
115
151
151
168
229
217
241
337
393
453
512
604846967
1030109012101330
45
60
70
90
110
140
160
190
250
250
280
380
360
400
560
650
750
850
1000140016001700180020002200
57
76
88
113
139
177
203
240
317
317
354
480
456
505
710
823
949
1070
1270177020302150228025302790
67
89
103
133
163
207
237
280
369
369
413
560
532
588
827
962
1120
1260
1480207023602150266029603250
78
104
122
157
192
243
279
331
436
436
487
660
624
696
975
1130
1310
1480
1750244027902960313034803830
94
126
147
189
231
293
337
399
524
524
587
795
755
837
1170
1370
1570
1780
2110294033603570378042004620
108
144
168
216
263
335
384
456
600
600
671
909
863
957
1340
1570
1800
2030
2410335038304070431047905260
130
174
202
260
318
404
466
549
723
723
809
1100
1040
1160
1620
1880
2170
2450
2890404046104900519057706340
148
199
232
297
363
463
532
628
827
827
927
1260
1190
1320
1850
2150
2480
2810
3310461052705600593065907250
179
239
278
358
439
557
642
756
997
997
1120
1520
1430
1590
2230
2600
2990
3390
4000556063506750715079408730
WASHING DRUM
STANDARDSPRAY NOZZLE
1/4 G - SS 1530
C30
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
NARROW ANGLE 15° SERIES
G15removable cap & vane
1⁄8"-1⁄2" NPT or BSPT (F)
GG15removable cap & vane
1⁄8"-1⁄2" NPT or BSPT (M)
H15one-piece body
3⁄4"-5" NPT or BSPT (F)
Other Accessoriesⓦ Pressure Gaugesⓦ Pressure Regulatorsⓦ Pressure Relief Valvesⓦ Control Valvesⓦ Solenoid Valvesⓦ Check Valves
SEE SECTION G FORCOMPLETE INFORMATION.
ⓦ Cleaning and washing ofproducts requiring deep penetration and/or sprayinduced turbulence to ensurethorough washing
ⓦ Desuperheating of steam
ⓦ Spraying the inside of ductsand pipe for cooling or cleaning
SPRAY NOZZLES
Narrow Angle Injector FullJetnozzles feature a solid cone-shaped spray pattern with around impact area. The narrowspray angles of the 30° series,and to a greater extent the 15°series, produce uniform andcoarse sprays with significantlyhigher impact per unit area thanwider angle FullJet nozzles atthe same flow rate.
G and GG type FullJet nozzleshave removable caps and vanes.
H and HH type Narrow AngleFullJet nozzles have removablevanes.
Sizes !\°" through 1!\›" are frombar stock; 1!\¤" and larger are cast.
FullJet nozzles are precision-engineered and machined to
exacting dimensions to assureoptimal performance. Theiruniform spray distribution resultsfrom a unique and original vanedesign…with large flowpassages and superior spraycontrol characteristics.
Split-EyeletConnector
AdjustableBall Fittings
TWStrainer
PERFORMANCE DATA
COMMON APPLICATIONS
DESIGN FEATURES
ACCESSORIES
ORDERING INFORMATION
NozzleType
CapacitySize
MaterialCode
InletConnectionPipe Size
NozzleInlet
Conn.NPT orBSPT
NOZZLE TYPECapacity
Size
SPRAYANGLE
13°13°13°13°13°13°13°14°14°14°14°14°14°14°
15°15°15°15°15°15°15°15°15°15°15°15°15°15°
15°15°15°15°15°15°15°15°15°15°15°15°15°15°
(F)Conn.
(M)Conn.
G H GG
Standard Material Material Codeno material code = Brass SS = 303 Stainless Steel (Bar Stock)SS = 316 Stainless Steel (Cast Type)/303 SS
Caps 1Q\„" and Larger
Q Q QQ Q QQ Q Q
1/8 ⓦ ⓦ 1507 Q\ŒÁⓦ ⓦ 1514 E\´„
1/4 ⓦ ⓦ 1530 Q\ˆ
3/8 ⓦ ⓦ 1550 QQ\Á‰
1/2 ⓦ ⓦ 1590 U\´„
3/4 ⓦ 15150 QO\Á‰
1 ⓦ 15280 WT\Á‰
1-1/4 ⓦ 15430 EQ\Á‰
1-1/2 ⓦ 15630 QO\´„
2 ⓦ 151150 TQ\Á‰
2-1/2 ⓦ 151750 EQ\´„
3 ⓦ 152500 1T\´„
4 ⓦ 154500 1O\ŒÁ
5 ⓦ 157000 1TO\Á‰
CAPACITY(gallons per minute)
10psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
200psi
300psi
.35
.701.52.54.57.5
14.022325887
125225350
.50
.992.13.56.4
10.619.8
304581
124176318495
.611.22.64.37.8
13.0233755
100152216390606
.701.43.05.09.0
15.0284363
115175250450700
.861.73.76.1
11.018.4
345377
141214306550858
.992.04.27.1
12.721406189
162247353636990
1.12.24.77.9
14.2244468
100182277395712
1108
1.42.75.89.7
17.4295483
122223339484871
1356
1.63.16.7
11.220346396
141257391559
10061565
1.93.88.2
13.7254177
118173315479685
12321917
10psi
40psi
100psi
OrificeDiam.Nom.Inches
H Cast Type
H Bar Stock
GG
G
HH
C31
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
NARROW ANGLE 30° SERIES
ORDERING INFORMATION
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
ACCESSORIES
G30removable cap & vane
1⁄8"-3⁄4" NPT or BSPT (F)
GG30removable cap & vane
1⁄8"-3⁄4" NPT or BSPT (M)
HH301"-21⁄2" NPT or BSPT (M)
Other Accessoriesⓦ Pressure Gaugesⓦ Pressure Regulatorsⓦ Pressure Relief Valvesⓦ Control Valvesⓦ Solenoid Valvesⓦ Check Valves
SEE SECTION G FOR COMPLETE INFORMATION.
Based on largest/heaviest version of each type.
NozzleInlet
Conn.NPT orBSPT
NozzleInlet
Conn.NPT orBSPT
NozzleInlet
Conn.NPT orBSPT
NozzleInlet
Conn.NPT orBSPT
NozzleInlet
Conn.NPT orBSPT
NozzleInlet
Conn.NPT orBSPT
Nozzle TypeCapacity
Size
SPRAYANGLE
17°17°26°23°23°25°26°26°27°27°27°27°27°27°28°28°28°28°28°28°28°28°
30°30°30°30°30°30°30°30°30°30°30°30°30°30°30°30°30°30°30°30°30°30°
31°32°32°30°30°30°31°31°30°30°30°30°30°30°30°30°30°30°30°30°30°30°
(F)Conn.
(M)Conn.
G GG HH
Standard Materials Material Codeno material code = Brass SS = 303 Stainless Steel316SS = 316 Stainless Steel
STANDARDSPRAY NOZZLE
1/2 GG - SS 3030NozzleType
CapacitySize
MaterialCode
InletConnectionPipe Size
Split-EyeletConnector
TWStrainer
AdjustableBall Fittings
Q Q QQ Q QQ Q
A
Q\ˆ 1QE\´„" QQ\ŒÁ" hex. 2 oz.Q\‰ 1QQ\ŒÁ" QE\ŒÁ" hex. 3 oz.E\ˆ 2Q\ˆ" 1" hex. 6 oz.Q\„ 2T\ˆ" 1Q\‰" hex. 11 oz.E\‰ 3T\ŒÁ" 1Q\„" hex. 1Q\‰ lbs.
B NetWeight
A
Q\ˆ 1QU\´„" QQ\ŒÁ" hex. 2 oz.Q\‰ 1WT\´„" QE\ŒÁ" hex. 3 oz.E\ˆ 2E\ŒÁ" 1" hex. 6 oz.Q\„ 2E\‰" 1Q\‰" hex. 11 oz.E\‰ 3U\ŒÁ" 1Q\„" hex. 1Q\‰ lbs.
B NetWeight
A
1 3T\ˆ" 1T\ŒÁ" dia. 1Q\‰ lbs.1Q\‰ 5" 1QQ\ŒÁ" dia. 2Q\‰ lbs.1Q\„ 6E\´„" 1U\ˆ" dia. 3Q\‰ lbs.2 7U\ˆ" 2E\ˆ" dia. 7E\ˆ lbs.
2Q\„ 10E\ˆ" 2U\ˆ" dia. 12 lbs.
B NetWeight
A
E\‰ 2WU\´„" 1Q\‰" dia. 15 oz.1 3T\ˆ" 1Q\„" dia. 1Q\‰ lbs.
1Q\‰ 4T\ˆ" 1U\ˆ" dia. 2Q\„ lbs.
B NetWeight
A
1Q\„ 5" 2T\ŒÁ" dia. 3 lbs.2 7U\´„" 3" dia. 4 lbs.
2Q\„ 9E\ŒÁ" 3U\ŒÁ" dia. 6Q\„ lbs.3 10O\ŒÁ" 4Q\ˆ" dia. 9Q\„ lbs.4 13T\ŒÁ" 5U\ŒÁ" dia. 20 lbs.5 16U\ˆ" 6E\‰" oct. 36 lbs.
B NetWeight
ⓦ ⓦ 3001.4 Q\´„1/8 ⓦ ⓦ 3002.5 Q\´„ⓦ ⓦ 3004 E\Á‰ⓦ ⓦ 3007 Q\ŒÁ
1/4 ⓦ ⓦ 3009 T\Á‰
3/8 ⓦ ⓦ 3014 E\´„
1/2 ⓦ ⓦ 3030 Q\ˆ
3/4 ⓦ ⓦ 3050 QQ\Á‰
1 ⓦ 3070 QE\Á‰ⓦ 30100 Q\‰
1-1/4 ⓦ 30150 QO\Á‰ⓦ 30200 QQ\´„
1-1/2 ⓦ 30250 E\ˆⓦ 30300 QE\´„
ⓦ 30350 U\ŒÁ2 ⓦ 30400 QT\´„ⓦ 30500 QU\´„
ⓦ 30600 EU\Á‰ⓦ 30700 T\ˆ
2-1/2 ⓦ 301000 E\‰ⓦ 301100 WT\´„ⓦ 301200 QE\ŒÁ
CAPACITY(gallons per minute)
15psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
200psi
300psi
.09
.15
.25
.43
.55
.861.83.14.36.19.212.315182125313743616773
.10
.18
.28
.50
.64
.992.13.55.07.110.614.218212528354250717885
.12
.22
.35
.61
.781.22.64.36.18.713.017.3222630354352618795104
.14
.25
.40
.70
.901.43.05.07.010.015.020.025303540506070100110120
.17
.31
.49
.861.11.73.76.18.612.318.42531374349617486123135147
.20
.35
.57
.991.32.04.27.19.914.2212835425057718599141155170
.22
.40
.631.11.42.24.77.911.115.82432404755637995111158174190
.27
.48
.781.41.72.75.89.713.619.429394858687897116136194213232
.31
.56
.901.62.03.16.711.215.722344556677890112134157223246268
.38
.681.11.92.53.88.213.719.2274155688296110137164192274301328
15psi
40psi
100psi
OrificeDiam.Nom.Inches
C32
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
WIDE ANGLESTANDARD TYPE
STANDARDSPRAY NOZZLE
1/4 GG - SS 14WNozzleType
InletConnectionPipe Size
MaterialCode
CapacitySize
G-Wremovable cap & vane
1⁄8"-1⁄2" NPT or BSPT (F)
GG-Wremovable cap & vane
1⁄8"-1⁄2" NPT or BSPT (M)
H-Wone-piece body
3⁄4"-1" NPT or BSPT (F)
HH-Wone-piece body
1⁄4"-1" NPT or BSPT (M)
H-Wone-piece cast body
11⁄4"-4" NPT or BSPT (F)
SPRAY NOZZLES
Wide Angle FullJets feature asolid cone-shaped spray patternwith a round impact area andspray angles of 120° to 125°.
They produce a uniform spray of medium to coarse dropletsacross their entire spray area…togive excellent results in spraying
applications requiring completecoverage of an area or zone.
This uniform spray distributionresults from a unique vanedesign and exacting internalproportions…engineered toassure accurate and consistentperformance.
G-W and GG-W Wide AngleFullJet nozzles feature three-piece construction (body/cap/vane) with removable vane. Thisstyle of nozzle is especially well-suited for header and manifoldinstallations…allowing theremoval and inspection of thecap and vane without removal ofthe nozzle body from the header.
HH-W Wide Angle FullJetnozzles (!\›" to 1") feature two-piece construction with non-removable vanes.
H-W FullJet nozzles feature two-piece construction with removablevanes (cast type).
ⓦ Washing & rinsing processes
ⓦ Quenching & cooling of coke, primary metals andother materials
ⓦ Suppression of fugitive dust in the processing of bulk ores, coal, limestone, sandand gravel
ⓦ Scrubbing, washing andcooling of flue gases toremove fly ash and otherproducts of combustion
ⓦ Deluging combustible materialsand storage tanks for firesuppression and prevention
ⓦ Breaking up and deaeratingfoam
ⓦ Creating and dispersingdroplets in chemical reactionprocessing
ORDERING INFORMATION
COMMON APPLICATIONS
DESIGN FEATURES
ACCESSORIES
ⓦ Pressure Gaugesⓦ Pressure Regulatorsⓦ Pressure Relief Valvesⓦ Control Valvesⓦ Solenoid Valvesⓦ Check ValvesSEE SECTION G FORCOMPLETE INFORMATION.
Split-Eyelet Adjustable TW Strainer Other AccessoriesConnector Ball Fittings
H Cast Type
H Bar Stock
G
C33
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
SQUARE SPRAY ANGLE TYPE
GGA-Wremovable cap & vane
1⁄8"-1⁄2" NPT or BSPT (M)
GA-Wremovable cap & vane
1⁄8"-1⁄2" NPT or BSPT (F)
H-WSQone-piece body
3⁄4"-1" NPT orBSPT (F)
H-WSQone-piece cast body
11⁄4"-3" NPT orBSPT (F)
HH-WSQone-piece body
1⁄4"-1" NPT orBSPT (M)
ORDERING INFORMATIONSTANDARD
SPRAY NOZZLE
1/4 GA - SS 14WNozzleType
InletConnectionPipe Size
MaterialCode
CapacitySize
Wide Angle Square SprayFullJets feature a solid cone-shaped spray pattern with asquare impact area and sprayangles of 93°-115°.
Their uniform spray distributionof medium to large droplets isthe result of the unique FullJetnozzle vane design, exactinginternal proportions, andprecision machining.
The Wide Angle Square Spraytype of FullJet is ideal for instal-lations requiring uniform coverageof rectangular areas or zones.
Sizes 1!\›" and larger are casttype nozzles with removablevanes.
Angle Type Wide Spray FullJetsfeature a spraying axis 90° fromthe axis of the nozzle inlet, asolid cone-shaped spray patternwith a round impact area, and aspray angle of 120°.
The angle type design is usefulwherever FullJet nozzles mustbe installed on an extensionover the center of a spray zoneor mounted in a side-tappedheader.
Angle type FullJet nozzles haveremovable caps and vanes forconvenient inspection andcleaning operations.
FullJet nozzles are precision-engineered and manufactured toassure accurate and reliableflow rate and spray patterncharacteristics. Their uniqueinternal vane with large flowpassages assures a uniformspray of well-formed dropletsacross their entire spray areaover a wide range of pressuresand flow rates.
DESIGN FEATURES
DIMENSIONS & WEIGHTS
DESIGN FEATURES
Based on largest/heaviest version of each type.
NozzleInlet
Conn.NPT orBSPT
NozzleInlet
Conn.NPT orBSPT
HHNozzleInlet
Conn.NPT orBSPTNozzle
InletConn.NPT orBSPT
GGNozzleInlet
Conn.NPT orBSPT
NozzleType
GA-W
GGA-W
NozzleInlet
Conn.NPT orBSPT
A
Q\ˆ 1U\´„" O\ŒÁ" hex. 1 oz.Q\‰ 1QT\´„" QQ\ŒÁ" hex. 1Q\„ oz.E\ˆ 1QE\ŒÁ" QE\ŒÁ" hex. 2Q\„ oz.Q\„ 2Q\‰" 1" hex. 6 oz.
B NetWeight
A
1Q\‰ 3U\ŒÁ" 2Q\ŒÁ" dia. 1Q\‰ lbs.1Q\„ 4Q\ŒÁ" 2T\ŒÁ" dia. 1E\‰ lbs.2 5U\ŒÁ" 3" dia. 3E\‰ lbs.
2Q\„ 6U\ˆ" 3U\ŒÁ" dia. 4E\‰ lbs.3 7WE\´„" 4Q\ˆ" dia. 6 lbs.4 9U\ˆ" 5U\ŒÁ" dia. 18 lbs.
B NetWeight A
Q\‰ WO\´„" QU\´„" dia. Q\„ oz.E\ˆ 1E\ŒÁ" WQ\´„" dia. 1 oz.Q\„ 1E\ˆ" QE\ŒÁ" dia. 1Q\„ oz.E\‰ 1QO\´„" 1Q\ŒÁ" dia. 3Q\„ oz.1 2E\´„" 1T\ŒÁ" dia. 7 oz.
B NetWeight
A
E\‰ 2E\ŒÁ" 1Q\‰" dia. 7Q\‰ oz.1 2E\‰" 1Q\„" dia. 13 oz.
B NetWeight
A
Q\ˆ 1O\´„" O\ŒÁ" hex. E\‰ oz.Q\‰ 1O\ŒÁ" QQ\ŒÁ" hex. 1Q\„ oz.E\ˆ 1WU\´„" QE\ŒÁ" hex. 2Q\„ oz.Q\„ 2U\´„" 1" hex. 6 oz.
B NetWeight
Q\ˆ QQ\ŒÁ" T\ˆ" O\ŒÁ" sq. EQ\´„" WO\´„" 1Q\„ oz.Q\‰ U\ˆ" WT\´„" QQ\ŒÁ" sq. 1U\´„" 1T\´„" 2 oz.E\ˆ 1" U\ˆ" QE\ŒÁ" sq. 1U\ŒÁ" 1O\´„" 3Q\‰ oz.Q\„ 1QU\´„" 1Q\ŒÁ" 1" sq. 2Q\´„" 1O\ŒÁ" 6Q\‰ oz.Q\ˆ QQ\ŒÁ" WQ\´„" O\ŒÁ" sq. EQ\´„" QT\ŒÁ" 1Q\„ oz.Q\‰ U\ˆ" QE\ŒÁ" QQ\ŒÁ" sq. 1Q\‰" 1T\´„" 2 oz.E\ˆ 1" WO\´„" QE\ŒÁ" sq. 1U\ŒÁ" 1T\ŒÁ" 3Q\‰ oz.Q\„ 1QU\´„" 1Q\ˆ" 1" sq. 2Q\´„" 1T\ˆ" 6Q\‰ oz.
A C D L NetWeightB
C34
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
PERFORMANCE DATA
ORDERING INFORMATION
WIDE ANGLESTANDARD TYPE/SQUARE SPRAY/ANGLE TYPE (CONT.)
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦ
ⓦ
ⓦ
ⓦ
ⓦ
ⓦⓦ
ⓦ
ⓦ
ⓦ
ⓦ
NozzleInlet
Conn.NPT orBSPT
1/8
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
2-1/2
3
4
Standard Materials Material Codeno material code = BrassI = Mild Steel (Bar Stock) or Cast Iron (Cast)SS = 303 Stainless Steel (Bar Stock) or 316 Stainless Steel (Cast)316SS = 316 Stainless Steel (Bar Stock)PVC = Polyvinyl Chloride
NOZZLE TYPE
STANDARD SQUARE
(F)Conn.
G H GG HH H HH GA GGA
(F)Conn.
(F)Conn.
(M)Conn.
(M)Conn.
(M)Conn.
ANGLETYPE Capacity
Size
2.8W4.3W5.6W8W10W12W14W
14WSQ17W
17WSQ20W
20WSQ24W
24WSQ27W
27WSQ30W
30WSQ35W
35WSQ40W
40WSQ45W
45WSQ50W
50WSQ6W
71WSQ11W
130WSQ16W
190WSQ24W
290WSQ47W
560WSQ70W
830WSQ95W
1070WSQ188W
112°114°114°99°
114°99°
114°104°114°104°114°104°114°104°114°104°114°104°114°104°114°104°115°105°117°107°118°108°119°109°120°110°120°110°120°110°120°
120°120°120°120°120°120°120°101°120°101°120°110°120°110°120°110°120°110°120°110°120°110°120°110°120°110°120°110°120°110°121°111°124°114°124°114°125°115°125°115°125°
102°102°102°103°103°103°103°93°
103°93°
104°94°
104°94°
106°98°
108°102°108°102°108°102°110°102°112°102°112°102°117°107°119°109°119°109°119°109°119°109°119°109°119°
SPRAYANGLE
STANDARDSPRAY NOZZLE
1/4 GG - SS 14WNozzleType
CapacitySize
MaterialCode
InletConnectionPipe Size
Q Q Q Q Q Q Q QQ Q Q Q Q Q Q QQ Q Q Q Q Q Q QQ Q Q Q Q Q Q
Q Q
Q\ŒÁT\Á‰E\´„E\´„
U\Á‰Q\ˆO\Á‰O\Á‰
T\´„T\´„QQ\Á‰QQ\Á‰E\ŒÁE\ŒÁQE\Á‰QE\Á‰
U\´„U\´„QT\Á‰QT\Á‰Q\‰Q\‰Q\‰Q\‰QU\Á‰QU\Á‰
WT\Á‰WT\Á‰
EE\Á‰EE\Á‰
EO\Á‰EO\Á‰
WE\´„WE\´„
YE\Á‰YE\Á‰
1Q\‰1Q\‰
1E\ˆ1E\ˆ
2
.040
.040
.040
.050
.050
.050Q\ŒÁQ\ŒÁ
Q\ŒÁQ\ŒÁE\´„E\´„E\´„E\´„U\Á‰U\Á‰
U\Á‰U\Á‰Q\ˆQ\ˆQ\ˆQ\ˆO\Á‰O\Á‰T\´„T\´„
QQ\Á‰QQ\Á‰
U\´„U\´„
Q\‰U\´„
QE\´„T\ŒÁ
U\ŒÁU\ŒÁ
O\ŒÁO\ŒÁ
QQ\ŒÁQQ\ŒÁ
QE\ŒÁ
.74
.891.01.01.31.31.51.51.81.82.02.02.22.22.62.63.03.03.33.33.73.75.25.29.59.5
13.813.8
2121414160608282
162
.48
.68
.861.01.21.21.51.51.71.72.12.12.32.32.62.63.03.03.43.43.93.94.34.36.06.0
11.011.016.016.0
2424474770709595
188
.28
.43
.56
.801.01.21.41.41.71.72.02.02.42.42.72.73.03.03.53.54.04.04.54.55.05.07.07.0
12.912.918.718.7
282855558282
111111220
.33
.51
.67
.961.21.41.71.72.02.02.42.42.92.93.23.23.63.64.24.24.84.85.45.46.06.08.48.4
15.415.4
2222343466669898
133133263
.38
.58
.761.11.41.61.91.92.32.32.72.73.33.33.73.74.14.14.84.85.45.46.16.16.86.89.59.5
17.517.5
252538387575
111111151151299
.45
.70
.911.31.61.92.32.32.82.83.23.23.93.94.44.44.94.95.75.76.56.57.37.38.18.1
11.411.4
2121303046468989
133133180180357
.51
.791.01.51.82.22.62.63.13.13.73.74.44.45.05.05.55.56.46.47.47.48.38.39.29.2
12.912.9
242434345252
101101151151205205405
.61
.951.21.82.22.63.13.13.73.74.44.45.35.35.95.96.66.67.77.78.88.89.99.9
11.011.015.415.4
282841416262
121121180180245245484
.701.11.42.02.53.03.53.54.24.25.05.06.06.06.76.77.57.58.78.7
10.010.011.211.212.512.517.517.5
323247477070
137137204204277277549
OrificeDiam.Nom.Inches
Maxi-mumFree
PassageDiam.Inches
CAPACITY(gallons per minute)
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
80psi
5psi
10psi
80psi
C35
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
The new natural KYNAR FullJetspray nozzle provides chemicaland corrosion resistance in anultra-pure nozzle. The natural,
non-pigmented KYNAR materialcontains no colorants or fillings.Ideal for integrated circuit andPCB manufacturing, this fullcone spray nozzle is made ofnatural polyvinyldene fluoride(PVDF) thermoplastic.
KYNAR FullJet nozzles areavailable with pipe connectionsizes of !\°", !\›" and #\°" NPT orBSPT. They range in flow ratesfrom .25 gpm to 1.9 gpm at 40psi (.97 l/min to 7.4 l/min at 3bar), and handle temperatures to300°F (150°C) at 100 psi (7 bar).
The nozzle body has standardhex sizes and a flange for easyinstallation and removal using astandard socket wrench.
HH-KY
SPRAY NOZZLES
KYNAR® SERIES
ⓦ Integrated circuitmanufacturing
ⓦ PCB manufacturing
ⓦ Washing and rinsing
ⓦ Quenching and cooling
ⓦ Dust suppression
ⓦ Gas scrubbing
ⓦ Deaerating
DESIGN FEATURES
COMMON APPLICATIONS
DIMENSIONS & WEIGHTS
PERFORMANCE DATA
ORDERING INFORMATIONSTANDARD
SPRAY NOZZLE
1/8 HH - KY 1.3NozzleType
CapacitySize
MaterialCode
InletConn.Pipe Size
Nozzle Inlet Conn.
Capacity Size
Spray Angle
1/8
3/8
1/4
1.3
4
6
6
8
6
8
10
Nozzle TypeNPT (M) BSPT (M)
Q\ˆHH-KY
Q\‰HH-KY
E\ˆHH-KY
BQ\ˆHH-KY
BQ\‰HH-KY
BE\ˆHH-KY
Q\ˆ
Q\‰
E\ˆ
Nozzle Inlet Connection
AHex
NozzleInlet
Connection
Vane
L
BDia.
10 psi 20 psi 30 psi 40 psi 60 psi 80 psi 100 psi 10 psi 20 psi 80 psi
OrificeDiameterinches
Capacity in gallons per minute
.040
.073
.089
.089
.096
.089
.096
.109
.13
.40
.60
.60
.80
.60
.80
1.0
.18
.55
.83
.83
1.1
.83
1.1
1.4
.22
.66
.99
.99
1.3
.99
1.3
1.7
.25
.76
1.1
1.1
1.5
1.1
1.5
1.9
.30
.91
1.4
1.4
1.8
1.4
1.8
2.4
.34
1.0
1.6
1.6
2.1
1.6
2.1
2.7
.37
1.2
1.7
1.7
2.3
1.7
2.3
3.0
52°
52°
67°
67°
58°
67°
58°
58°
65°
65°
75°
75°
70°
75°
70°
70°
59°
59°
82°
82°
64°
82°
64°
64°
A Hex
B Diameter
LLength
NetWt.
E\ˆ"
Q\„"
Q\„"
T\ˆ"
E\‰"
E\‰"
U\ˆ"
1"
1Q\´„"
0.1 oz.
0.1 oz.
0.2 oz.
C36
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
HHSJthreaded/flats
1⁄4)-4) NPT or BSPT (M)
HHSJthreaded/hex
1⁄4)-2) NPT or BSPT (M)
HHSJthreaded/round
1⁄4)-4) NPT or BSPT (M)
ⓦ Flue gas scrubbing
ⓦ Gas cooling
ⓦ Washing & rinsing processes
ⓦ Fire supression & prevention
The Type HHSJ is a Full Conespray nozzle available for sprayangles ranging from 60° to 170°.These compact nozzles permitmaximum liquid throughput for agiven pipe size and the freepassage design minimizesclogging. The compact size canbe installed or retrofitted on mostpipe systems. Available in NPTor BSPT (M) threads.
Flow capacity at 40 psi (3 bar)ranges from 1.4 to 1050 gpm(5.5 to 4140 l/min).
Sizes 1⁄4) to 2) are available inbrass, cast 316 stainless steel,and TEFLON or PVC materials.Brass version is available withhex design. Stainless steel withflats. TEFLON and PVC nozzleswith rounded design. In thelarger 3) and 4) sizes, both brassand stainless steel are available
in flats design only. They canalso be produced from a widevariety of other materials forspecific applications.
COMPLETE NOZZLENUMBER
1/4 HHSJ-SS 120 07NozzleType
MaterialCode
SprayAngle
PipeSize
Pipe SizeNPT or
BSPT (M)
CapacitySize
60° 90° 120° 150° 170°
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
1/4
3/8
1/2
3/4
1
1-1/2
2
3
4
Material Material Codeno material code = Brass
SS = Cast 316 Stainless Steel
TEF = TEFLON
PVC = Polyvinyl Chloride
Adjustable Ball Fittings
Capac–ity
Size
**At higher pressures, Brass and Cast 316 Stainless Steel nozzles are required.
COMPACT, ONE PIECE, LARGE FLOW RATEFULL CONE SPRAY NOZZLES
SPRAY NOZZLES
DESIGN FEATURES
ACCESSORIES
ORDERING INFORMATION
PERFORMANCE DATA
COMMON APPLICATIONS
DIMENSIONS
QQQQ
OrificeDiam.
FreePassageDiam.
CAPACITY(gallons per minute)
10psi
20psi
40psi
100psi
400**psi
.71.32.0.7
1.32.03.04.05.38.2
12.016.4
213447648296
140178256336525
.991.82.8.991.82.84.25.77.5
11.617.0
2330486691
116136198252362475743
1.42.64.01.42.64.06.08.0
10.616.4
2433426894
128164192280356512672
1050
2.24.16.32.24.16.39.5
12.616.8
26385266
108149202259304443563810
10601660
4.48.2
12.64.48.2
12.619.0
25345276
104133215297405519607885
1125162021203320
07 3⁄32) 3⁄32)13 1⁄8) 1⁄8)20 5⁄32) 1⁄8)07 3⁄32) 3⁄32)13 1⁄8) 1⁄8)20 5⁄32) 1⁄8)30 3⁄16) 1⁄8)40 7⁄32) 1⁄8)53 1⁄4) 1⁄8)82 5⁄16) 1⁄8)
120 3⁄8) 3⁄16)164 7⁄16) 3⁄16)
210 1⁄2) 3⁄16)
340 5⁄8) 1⁄4)470 3⁄4) 1⁄4)640 7⁄8) 5⁄16)820 1) 5⁄16)960 11⁄8) 5⁄16)
1400 13⁄8) 7⁄16)1780 11⁄2) 7⁄16)
2560 13⁄4) 9⁄16)3360 2) 9⁄16)
5250 21⁄2) 5⁄8)
Nozzle Nozzle Spray AngleInlet Conn. Length
1/4) 21⁄8) 60°, 150° & 170°1/4) 17⁄8) 90° & 120°3/8) 23⁄8) 60° 150° & 170°3/8) 17⁄8) 90° & 120°1/2) 31⁄8) 60°, 150° & 170°1/2) 21⁄2) 90° & 120°3/4) 37⁄16) 60°, 150° & 170°3/4) 23⁄4) 90° & 120°1) 49⁄16) 60°, 150° & 170°1) 35⁄8) 90° & 120°
11/2) 63⁄4) 60°, 150° & 170°11/2) 43⁄8) 90° & 120°2) 67⁄8) 60° thru 170°3) 117⁄8) 60°3) 8) 90° & 120°4) 9) 60°, 90° & 120°
C37
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
FULL CONE FLANGE-TYPE NOZZLES
HFSJ2), 3) & 4) sizes
ⓦ Flue gas desulphurization
ⓦ Dust supression
ⓦ Gas cooling
Type HFSJ (full cone) flange-typenozzles provide good coveragefor a variety of applications fromflue gas desulphurization anddust suppression to gas cooling.They are available with reaction-bonded silicon carbide tips onFRP flanges and up to 4) sizeflange connections.
These larger capacity nozzlesare size efficient…for maximumthroughput for a given pipe sizeand the large free passageresists clogging.
Flow capacities at 10 psi (.7 bar)range from 140 to 525 gpm (530to 2020 l/min). These full conenozzles are available with 2), 3)and 4) flange mountings andspray angles from 60° to 170°.
They are designed with precisionimpact blade angles thatdistribute the spray droplets forexcellent coverage. The flange-type nozzles can be custom-sized for your installation andare available in severalabrasion-resistant materials.
COMPLETE NOZZLENUMBER
3 HFSJ-SILCRB 60 2560NozzleType
MaterialCode
SprayAngle
Capac-ity
Size
FlangeInlet
Conn.Size
ConnectionSize
CapacitySize
60° 90° 120° 150° 170°
ⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦ
ⓦⓦ
ⓦⓦ
2)Fläns*
3)Fläns*
4) Fläns*
Standard MaterialReaction-bonded Silicon Carbide withF.R.P. Flange.
Material CodeSILCRB = Reaction-bonded
Silicon Carbide
SPRAY NOZZLES
DESIGN FEATURES
ORDERING INFORMATION
PERFORMANCE DATA
COMMON APPLICATIONS
OrificeDiam.
FreePassageDiam.
CAPACITY(gallons per minute)
10psi
20psi
40psi
100psi
400psi
140178256336525
198252362475743
280356512672
1050
443563810
10601660
8851125162021203320
1400 13⁄8) 7⁄16)1780 11⁄2) 7⁄16)
2560 13⁄4) 9⁄16)3360 2) 9⁄16)
5250 21⁄2) 5⁄8)
C38
GE
NE
RA
LP
UR
PO
SE
FULL
CO
NE
Maximum free passage SpiralJetnozzles minimize the possibilityof plugging in high-flow pollutioncontrol applications. With asimple one-piece design, theinlet orifice is the smallestopening that liquid passesthrough. The outlet helix orificeis proportionately larger than theinlet opening. This virtuallyeliminates plugging and allowsfor maximum liquid throughput.
Maximum free passage SpiralJetnozzles are available in brass,316SS, and polypropylene.Additional materials such asTEFLON, silicon carbide,ceramic, and PVC are availableupon request.
Type HHSJX SpiralJet nozzlesare available with either 90° or120° spray angle with full-conespray patterns. The HHSJX
nozzle is available in threadedhex, threaded round, andthreaded flats. Maximumoperating pressure depends onmaterial, size and application.
EXTRA LARGE FREE PASSAGESPRAY NOZZLES
HHSJXthreaded/hex
3⁄8"-2" NPT or BSPT (M)
HHSJXthreaded/flats
3⁄8"-2" NPT or BSPT (M)
HHSJXthreaded/round
3⁄8"-2" NPT or BSPT (M)
ⓦ Flue gas scrubbing
ⓦ Gas cooling
ⓦ Washing & rinsing processes
ⓦ Fire suppression & prevention
COMPLETE NOZZLEASSEMBLY
3/8 HHSJX-SS 120 30NozzleType
Capac-ity
Size
SprayAngle
MaterialCode
PipeSize
Other Accessoriesⓦ Pressure Regulatorsⓦ Control Valvesⓦ Solenoid Valvesⓦ Swivel ConnectorsSEE SECTION G FORCOMPLETE INFORMATION.
Adjustable Ball Fittings
Split-Eyelet Connector
Pipe SizeNPT or
BSPT (M)
CapacitySize
90° & 120°90° 120°
PPPP
PP
P
PP
PPP
PP
PPPP
PP
P
PP
PPP
PP
3/8
1/2
3/4
1
1-1/2
2
30405382
120164
210
340470
640820960
14001780
Material Material Codeno material code = Brass
SS = Cast 316 Stainless Steel
PP = Polypropylene
ORDERING INFORMATION
DESIGN FEATURESCOMMON APPLICATIONS
ACCESSORIES
PERFORMANCE DATA
Additional materials upon request.QQQ
Nozzle LengthOrificeDiam.inches
FreePassageDiam.inches
Spray Angle at 10 psi CAPACITY(gallons per minute)
10psi
20psi
40psi
100psi
400psi
3.04.05.38.2
12.016.4
21
3447
648296
140178
4.25.77.511.6
17.023
30
4866
91116136
198252
6.08.010.616.4
2433
42
6894
128164192
280356
9.512.616.826
3852
66
108149
202259304
443563
19.0253452
76104
133
215297
405519607
8851125
E\ŒÁU\´„Q\‰T\ŒÁ
E\ˆU\ŒÁ
Q\„
T\ˆE\‰
U\ˆ1
1Q\ˆ
1E\ˆ1Q\„
E\ŒÁU\´„Q\‰T\ŒÁ
E\ˆU\ŒÁ
Q\„
T\ˆE\‰
U\ˆ1
1Q\ˆ
1E\ˆ1Q\„
2E\‰"
3E\ˆ"
4T\ˆ"
5Q\ˆ"
6E\‰"
11"
FLAT SPRAY
INDEXVeeJet®
Standard Type H-VV, H-VVL,H-U, U................. C40-C43
VeeJet®
KYNAR® Series HVV-KY, HU-KY.......... C44
FlatJet®
Narrow Angle–High Impact P......................... C45, C46
FloodJet®
Wide AngleFor Liquid, Air & Steam K................................. C47
WashJet®
High Pressure-Washing MEG/WEG, MEG-SSTCQCMEG, MEF23990, 24055......C48, C49
High Pressure-CoatingRotoClean® Attachmentsand Kits for 106A, 220A..........C50, C51RotoClean® Attachmentand Kits for 225.................................C52
SPRAY NOZZLES
WASHING COAL
Split-Eyelet Pressure Gauge Adjustable Pressure 124 Strainer Control Valves Other AccessoriesConnector Ball Fittings Relief Valves
C40
GE
NE
RA
LP
UR
PO
SE
FLAT
SP
RAY
STANDARD TYPE
H-VVsmall capacity
1⁄8"-1⁄4" NPT or BSPT (M)
H-VVLintegral strainer
1⁄8"-1⁄4" NPT or BSPT (M)
H-Umedium capacity
1⁄8"-3⁄4" NPT or BSPT (M)
Ularge capacity
1"- 2" NPT or BSPT (M)
ⓦ Cooling and quenching
ⓦ Product washing
ⓦ Water cooling
ⓦ Air and gas washers
ⓦ Scrubbers
ⓦ Liquor washers
ⓦ Dust control
ⓦ Fire protection
ⓦ Check Valves
ⓦ Swivel Connectors
SEE SECTION G FORCOMPLETE INFORMATION.
SPRAY NOZZLES
Standard VeeJet spray nozzlesfeature a high impact solidstream or flat spray pattern withspray angles of 0° to 110°.
They produce a uniform distrib-ution of small to medium-sizeddroplets.
Specially tapered spray patternedges provide even spray cover-age when several nozzles withoverlapping patterns are required.
The H-VV and H-VVL seriesVeeJet nozzles feature flow ratesbelow 1 gpm at 40 psi (3.9 litersper minute at 3 bar), and malepipe thread connections. They arealso available with female pipeconnections by using DT in placeof VV in the order number. H-VVLseries nozzles come equippedwith built-in strainers (not availablewith female pipe connections).
H-U and U series VeeJet spraynozzles feature flow rates of 1gpm (3.9 liters per minute) andgreater at 40 psi (3 bar), and malepipe thread connections.
!\°" and !\›" H-U series nozzles areavailable with female pipe connec-tions by using DU in place of U inthe order number. See page C43for materials.
ORDERING INFORMATION
JET STABILIZERS DESIGN FEATURES
COMMON APPLICATIONS
ACCESSORIES
DESIGN FEATURES
Jet Stabilizers increase sprayprojection distance and sprayimpact on flat spray nozzles.When nozzles are mounted intees, manifolds, or elbows,internal flow turbulence is createdwhen the liquid turns the cornerand enters the nozzle. Thisturbulence can significantly distortspray pattern uniformity. JetStabilizers minimize turbulenceand increase spray distance andimpact by concentrating the sprayinto a thinner, steadier pattern.
JETSTABILIZER
11370 - SS - 1/8X1/8Connection
SizeMaterial
CodeJet
StabilizerType
Jet StabilizerOrder No.
Inlet Conn. NPTor BSPT (M)
Conn. for NozzleNPT or BSPT (F)
11370–1⁄8 x 1⁄8 1⁄8 1⁄8 3⁄4 1⁄411370–1⁄4 x 1⁄4 1⁄4 1⁄4 15⁄16 1⁄211370–3⁄8 x 3⁄8 3⁄8 3⁄8 11⁄16 111370–1⁄2 x 1⁄2 1⁄2 1⁄2 11⁄4 13⁄411370–3⁄4 x 3⁄4 3⁄4 3⁄4 11⁄2 31⁄211370–1 x 1 1 1 113⁄16 61⁄411370–11⁄4 x 11⁄4 11⁄4 11⁄4 21⁄4 113⁄4
HeightInches
Net Weightoz.
C41
GE
NE
RA
LP
UR
PO
SE
FLAT
SP
RAY
PERFORMANCE DATASPRAY NOZZLES
Capa-citySize
VEEJET NOZZLESNOZZLE TYPE/INLET CONNECTION SPRAY ANGLE
H-VV H-VVL H-U U1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 3/4 1 1-1/4 2
SprayAngleat 40psi
Equiv.OrificeDiam.Inches
CAPACITY(gallons per minute)
5psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
200psi
300psi
.03
.05
.07
.11
.14
.18
.21
.28
.35
.53
.71
.03
.05
.07
.11
.14
.18
.21
.28
.35
.53
.711.11.41.82.12.53.55.3
.07
.11
.14
.18
.21
.28
.35
.53
.711.11.41.82.12.53.55.37.1
14.1
.05
.08
.11
.16
.27
.07
.09
.11
.14
.18
.21
.28
.35
.53
.711.11.41.82.12.53.55.37.1
.05
.07
.10
.15
.20
.25
.30
.40
.50
.751.0
.05
.07
.10
.15
.20
.25
.30
.40
.50
.751.01.52.02.53.03.55.07.5
.03
.05
.07
.10
.15
.20
.25
.30
.40
.50
.751.01.52.02.53.03.55.07.5
10.020.0.039.08.12.15.23.38
.03
.05
.07
.10
.13
.15
.20
.25
.30
.40
.50
.751.01.52.02.53.03.55.07.5
10.0
.07
.11
.14
.21
.28
.35
.42
.56
.711.11.4
.035.07.11.14.21.28.35.42.56.711.11.42.12.83.54.24.97.1
10.6.035.05.07.11.14.21.28.35.42.56.711.11.42.12.83.54.24.97.1
10.614.1
28.055.11.16.22.33.54
.012
.023.05.07.11.14.18.21.28.35.42.56.711.11.42.12.83.54.24.97.1
10.614.1
.09
.13
.17
.26
.35
.43
.52
.69
.861.31.7
.043.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.18.6
13.0.043.06.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.18.6
13.017.3
35.067.13.20.27.40.67
.015
.029.06.09.13.17.22.26.35.43.52.69.861.31.72.63.54.35.26.18.6
13.017.3
.10
.15
.20
.30
.40
.50
.60
.801.01.52.0
.050.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.0
10.015.0.050.067.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.0
10.015.020.0
40.077.154.231.308.462.770.017.033.067.10.15.20.25.30.40.50.60.801.01.52.03.04.05.06.07.0
10.015.020.0
.12
.18
.25
.37
.49
.61
.73
.981.21.82.5.06.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.6
12.218.4.06.08.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.6
12.218.4
2549.09.19.28.38.57.94
.021
.040.08.12.18.25.31.37.49.61.73.981.21.82.53.74.96.17.38.6
12.218.4
25
.14
.21
.28
.42
.57
.71
.851.11.42.12.8.07.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9
14.121.07.09.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9
14.1212857.11.22.33.44.651.1
.024
.047.09.14.21.28.35.42.57.71.851.11.42.12.84.25.77.18.59.9
14.12128
.16
.24
.32
.47
.63
.79
.951.31.62.43.2.08.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.115.8
24.08.11.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.115.8
243263.12.24.37.49.731.2
.027
.052.11.16.24.32.40.47.63.79.951.31.62.43.24.76.37.99.5
11.115.8
2432
.22
.34
.45
.67
.891.11.31.82.23.44.5.11.22.34.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7
2234.11.15.22.34.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7
22344490.17.34.52.691.01.7
.038.07.15.22.34.45.56.67.891.11.31.82.23.44.56.78.9
11.213.415.7
223444
.27
.41
.55
.821.11.41.62.22.74.15.5.14.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2
2741.14.18.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2
274155
110.21.42.63.841.32.1
.047.09.18.27.41.55.68.821.11.41.62.22.74.15.58.2
11.013.716.419.2
274155
500psi
20psi
40psi
80psi
200psi
.35
.53
.711.11.41.82.12.83.55.37.1.18.35.53.711.11.41.82.12.83.55.37.1
10.614.217.7
21253553.18.24.35.53.711.11.41.82.12.83.55.37.1
10.614.217.7
2125355371
142.27.54.821.11.62.7.06.12.24.35.53.71.881.11.41.82.12.83.55.37.1
10.614.217.7
2125355371
94°97°98°99°100°100°101°102°103°104°105°81°81°82°82°83°84°84°86°87°89°90°90°91°92°93°93°93°93°93°61°67°68°68°69°70°71°71°72°72°73°74°74°74°74°74°75°75°75°73°74°78°53°55°56°58°60°64°44°47°50°51°51°52°52°53°53°53°54°55°56°56°57°58°59°60°60°60°58°59°60°
110°110°110°110°110°110°110°110°110°110°110°95°95°95°95°95°95°95°95°95°95°95°95°95°95°95°95°95°95°95°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°80°73°73°73°73°73°73°65°65°65°65°65°65°65°65°65°65°65°65°65°65°65°65°65°65°65°65°65°65°65°
121°121°120°120°119°118°117°117°117°117°117°105°105°105°105°104°103°102°101°100°100°100°100°101°100°99°99°99°99°99°95°94°89°89°88°87°86°86°85°84°84°83°83°83°83°83°83°83°83°84°82°81°86°84°83°82°80°77°77°76°75°74°74°73°73°72°72°72°72°71°71°70°70°69°68°68°68°68°69°68°67°
124°124°123°123°122°122°122°121°119°118°118°113°113°113°113°111°108°107°106°105°105°105°105°105°105°103°103°103°102°102°101°99°92°92°91°90°89°89°88°87°87°86°86°86°86°85°85°86°86°86°85°83°92°88°87°86°84°82°86°83°81°80°80°79°79°78°76°76°75°74°74°73°73°72°72°71°71°71°70°70°69°
.026
.031
.036
.043
.052
.057
.062
.072T\Á‰E\´„U\Á‰
.018
.026
.031
.036
.043
.052
.057
.062
.072T\Á‰E\´„U\Á‰O\Á‰T\´„QQ\Á‰E\ŒÁQE\Á‰Q\‰QO\Á‰
.018
.021
.026
.031
.036
.043
.052
.057
.062
.072T\Á‰E\´„U\Á‰O\Á‰T\´„QQ\Á‰E\ŒÁQE\Á‰Q\‰QO\Á‰QQ\´„Q\„
.022
.032
.040
.045
.056
.072
.011
.015
.021
.026
.031
.036
.040
.043
.052
.057
.062
.072T\Á‰E\´„U\Á‰O\Á‰T\´„QQ\Á‰E\ŒÁQE\Á‰Q\‰QO\Á‰QQ\´„
11001 ⓦ ⓦ ⓦ ⓦ110015 ⓦ ⓦ ⓦ ⓦ11002 ⓦ ⓦ ⓦ ⓦ11003 ⓦ ⓦ ⓦ ⓦ11004 ⓦ ⓦ ⓦ ⓦ11005 ⓦ ⓦ ⓦ ⓦ110° 11006 ⓦ ⓦ ⓦ ⓦ11008 ⓦ ⓦ ⓦ ⓦ11010 ⓦ ⓦ11015 ⓦ ⓦ11020 ⓦ950050 ⓦ ⓦ9501 ⓦ ⓦ ⓦ ⓦ95015 ⓦ ⓦ9502 ⓦ ⓦ ⓦ ⓦ9503 ⓦ ⓦ ⓦ ⓦ9504 ⓦ ⓦ ⓦ ⓦ9505 ⓦ ⓦ ⓦ ⓦ9506 ⓦ ⓦ ⓦ ⓦ9508 ⓦ ⓦ ⓦ ⓦ
95° 9510 ⓦ ⓦ ⓦ9515 ⓦ ⓦ ⓦ9520 ⓦ ⓦ9530 ⓦ ⓦ ⓦ9540 ⓦ9550 ⓦ ⓦ9560 ⓦ ⓦ9570 ⓦ ⓦ ⓦ95100 ⓦ95150 ⓦ800050 ⓦ ⓦ ⓦ ⓦ800067 ⓦ ⓦ ⓦ ⓦ8001 ⓦ ⓦ ⓦ ⓦ80015 ⓦ ⓦ ⓦ ⓦ8002 ⓦ ⓦ ⓦ ⓦ8003 ⓦ ⓦ ⓦ ⓦ8004 ⓦ ⓦ ⓦ ⓦ8005 ⓦ ⓦ ⓦ ⓦ8006 ⓦ ⓦ ⓦ ⓦ8008 ⓦ ⓦ ⓦ ⓦ8010 ⓦ ⓦ ⓦ ⓦ80° 8015 ⓦ ⓦ ⓦ8020 ⓦ ⓦ ⓦ ⓦ8030 ⓦ ⓦ ⓦ ⓦ8040 ⓦ ⓦ ⓦ ⓦ8050 ⓦ ⓦ ⓦ8060 ⓦ ⓦ ⓦ8070 ⓦ ⓦ ⓦ80100 ⓦ ⓦ80150 ⓦ ⓦ80200 ⓦ ⓦ80400 ⓦ730077 ⓦ ⓦ ⓦ ⓦ730154 ⓦ ⓦ ⓦ ⓦ730231 ⓦ ⓦ73° 730308 ⓦ ⓦ ⓦ ⓦ730462 ⓦ ⓦ730770 ⓦ ⓦ650017 ⓦ ⓦ650033 ⓦ ⓦ650067 ⓦ ⓦ ⓦ ⓦ6501 ⓦ ⓦ ⓦ ⓦ65015 ⓦ ⓦ ⓦ ⓦ6502 ⓦ ⓦ ⓦ ⓦ65025 ⓦ ⓦ6503 ⓦ ⓦ ⓦ ⓦ6504 ⓦ ⓦ ⓦ ⓦ6505 ⓦ ⓦ ⓦ ⓦ
65° 6506 ⓦ ⓦ ⓦ ⓦ6508 ⓦ ⓦ ⓦ ⓦ6510 ⓦ ⓦ ⓦ6515 ⓦ ⓦ ⓦ ⓦ6520 ⓦ ⓦ ⓦ6530 ⓦ ⓦ6540 ⓦ ⓦ ⓦ6550 ⓦ ⓦ ⓦ ⓦ6560 ⓦ ⓦ ⓦ6570 ⓦ ⓦ ⓦ65100 ⓦ ⓦ65150 ⓦ65200 ⓦ ⓦ
C42
GE
NE
RA
LP
UR
PO
SE
FLAT
SP
RAY
PERFORMANCE DATA
5001 ⓦ ⓦ ⓦ ⓦ5002 ⓦ ⓦ ⓦ ⓦ5003 ⓦ ⓦ ⓦ ⓦ5004 ⓦ ⓦ ⓦ ⓦ5005 ⓦ ⓦ ⓦ ⓦ5006 ⓦ ⓦ ⓦ ⓦ5008 ⓦ ⓦ ⓦ ⓦ5010 ⓦ ⓦ ⓦ5015 ⓦ ⓦ ⓦ5020 ⓦ ⓦ ⓦ ⓦ50° 5030 ⓦ ⓦ ⓦ ⓦ5040 ⓦ ⓦ ⓦ5050 ⓦ ⓦ ⓦ5060 ⓦ ⓦ5070 ⓦ ⓦ ⓦ50100 ⓦ ⓦ50120 ⓦ50150 ⓦ ⓦ50200 ⓦ50400 ⓦ50500 ⓦ ⓦ50580 ⓦ50750 ⓦ501000 ⓦ501500 ⓦ502000 ⓦ4001 ⓦ ⓦ ⓦ ⓦ40015 ⓦ ⓦ ⓦ ⓦ4002 ⓦ ⓦ ⓦ ⓦ4003 ⓦ ⓦ ⓦ ⓦ4004 ⓦ ⓦ ⓦ ⓦ4005 ⓦ ⓦ ⓦ ⓦ4006 ⓦ ⓦ ⓦ ⓦ40° 4008 ⓦ ⓦ ⓦ ⓦ4010 ⓦ ⓦ ⓦ4015 ⓦ ⓦ ⓦ4020 ⓦ ⓦ ⓦ ⓦ4030 ⓦ ⓦ ⓦ4040 ⓦ ⓦ ⓦ4050 ⓦ ⓦ ⓦ4060 ⓦ ⓦ ⓦ4070 ⓦ ⓦ ⓦ40100 ⓦ ⓦ40150 ⓦ ⓦ40200 ⓦ2501 ⓦ ⓦ ⓦ ⓦ2502 ⓦ ⓦ ⓦ ⓦ2503 ⓦ ⓦ ⓦ ⓦ2504 ⓦ ⓦ ⓦ ⓦ2505 ⓦ ⓦ ⓦ ⓦ2506 ⓦ ⓦ ⓦ ⓦ2508 ⓦ ⓦ ⓦ ⓦ2510 ⓦ ⓦ2515 ⓦ ⓦ ⓦ2520 ⓦ ⓦ ⓦ25° 2530 ⓦ ⓦ ⓦ2540 ⓦ ⓦ2550 ⓦ ⓦ2560 ⓦ ⓦ2570 ⓦ ⓦ25100 ⓦ ⓦ25150 ⓦ ⓦ25200 ⓦ25500 ⓦ ⓦ25750 ⓦ251000 ⓦ1501 ⓦ ⓦ ⓦ ⓦ1502 ⓦ ⓦ1503 ⓦ ⓦ ⓦ ⓦ1504 ⓦ ⓦ ⓦ ⓦ1505 ⓦ ⓦ ⓦ ⓦ1506 ⓦ ⓦ ⓦ ⓦ
15° 1508 ⓦ ⓦ ⓦ ⓦ1510 ⓦ ⓦ1515 ⓦ ⓦ ⓦ1520 ⓦ ⓦ ⓦ1530 ⓦ ⓦ ⓦ1540 ⓦ ⓦ ⓦ1550 ⓦ ⓦ ⓦ
Capa-citySize
VEEJET NOZZLESNOZZLE TYPE/INLET CONNECTION SPRAY ANGLE
H-VV H-VVL H-U U1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 3/4 1 1-1/4 2
.026
.036
.043
.052
.057
.062
.072T\Á‰E\´„U\Á‰O\Á‰T\´„QQ\Á‰E\ŒÁQE\Á‰Q\‰QU\Á‰QO\Á‰QQ\´„Q\„EE\Á‰ET\Á‰T\ˆWE\´„TU\Á‰1Q\´„
.026
.031
.036
.043
.052
.057
.062
.072T\Á‰E\´„U\Á‰O\Á‰T\´„QQ\Á‰E\ŒÁQE\Á‰Q\‰QO\Á‰QQ\´„
.026
.036
.043
.052
.057
.062
.072T\Á‰E\´„U\Á‰O\Á‰T\´„QQ\Á‰E\ŒÁQE\Á‰Q\‰QO\Á‰QQ\´„EE\Á‰T\ˆRU\Á‰
.026
.036
.043
.052
.057
.062
.072T\Á‰E\´„U\Á‰O\Á‰T\´„QQ\Á‰
SprayAngleat 40psi
Equiv.OrificeDiam.Inches
CAPACITY(gallons per minute)
5psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
200psi
300psi
.11
.14
.18
.21
.28
.35
.53
.711.11.41.82.12.53.54.25.37.1
14.117.7
2127355371
.28
.35
.53
.711.11.41.82.12.53.55.37.1
1.11.41.82.12.53.55.37.1
17.72735
.05
.10
.15
.20
.25
.30
.40
.50
.751.01.52.02.53.03.55.06.07.5
10.0202529385075
100
.10
.15
.20
.25
.30
.40
.50
.751.01.52.02.53.03.55.07.5
10.0
.20
.25
.30
.40
.50
.751.01.52.02.53.03.55.07.5
10.0253850
.751.01.52.02.5
.07
.14
.21
.28
.35
.42
.56
.711.11.42.12.83.54.24.97.18.5
10.614.1
2835415371
106142.07.11.14.21.28.35.42.56.711.11.42.12.83.54.24.97.1
10.614.1.07.14.21.28.35.42.56.711.11.42.12.83.54.24.97.1
10.614.1
355371
.14
.21
.28
.35
.42
.56
.711.11.42.12.83.5
.09
.17
.26
.35
.43
.52
.69
.861.31.72.63.54.35.26.18.6
10.413.017.3
3543506587
130173.09.13.17.26.35.43.52.69.861.31.72.63.54.35.26.18.6
13.017.3.09.17.26.35.43.52.69.861.31.72.63.54.35.26.18.6
13.017.3
436587.09.17.26.35.43.52.69.861.31.72.63.54.3
.10
.20
.30
.40
.50
.60
.801.01.52.03.04.05.06.07.0
10.012.015.0
2040505875
100150200.10.15.20.30.40.50.60.801.01.52.03.04.05.06.07.0
10.015.020.0.10.20.30.40.50.60.801.01.52.03.04.05.06.07.0
10.015.020.0
5075
100.10.20.30.40.50.60.801.01.52.03.04.05.0
.12
.25
.37
.49
.61
.73
.981.21.82.53.74.96.17.38.6
12.214.718.4
2549617192
123184245.12.18.25.37.49.61.73.981.21.82.53.74.96.17.38.6
12.218.4
25.12.25.37.49.61.73.981.21.82.53.74.96.17.38.6
12.218.4
256192
123.12.25.37.49.61.73.981.21.82.53.74.96.1
.14
.28
.42
.57
.71
.851.11.42.12.84.25.77.18.59.9
14.117.0
2128577182
106142212283.14.21.28.42.57.71.851.11.42.12.84.25.77.18.59.9
14.12128.14.28.42.57.71.851.11.42.12.84.25.77.18.59.9
14.1212871
106142.14.28.42.57.71.851.11.42.12.84.25.77.1
.16
.32
.47
.63
.79
.951.31.62.43.24.76.37.99.5
11.115.819.0
2432637992
119158237316.16.24.32.47.63.79.951.31.62.43.24.76.37.99.5
11.115.8
2432.16.32.47.63.79.951.31.62.43.24.76.37.99.5
11.115.8
243279
119158.16.32.47.63.79.951.31.62.43.24.76.37.9
.22
.45
.67
.891.11.31.82.23.44.56.78.9
11.213.415.7
2227344490
112130168223335447.22.34.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7
223444.22.45.67.891.11.31.82.23.44.56.78.9
11.213.415.7
223444
112168223.22.45.67.891.11.31.82.23.44.56.78.9
11.2
.27
.55
.821.11.41.62.22.74.15.58.2
11.013.716.419.2
27334155
110137159206273411547.27.41.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2
274155.27.55.821.11.41.62.22.74.15.58.2
11.013.716.419.2
274155
137206273.27.55.821.11.41.62.22.74.15.58.2
11.013.7
500psi
20psi
40psi
80psi
200psi
.35
.711.11.41.82.12.83.55.37.1
10.614.217.7
212535425371
142177205266353530707.35.53.711.11.41.82.12.83.55.37.1
10.614.217.7
2125355371.35.711.11.41.82.12.83.55.37.1
10.614.217.7
2125355371
177266353.35.711.11.41.82.12.83.55.37.1
10.614.217.7
37°39°40°42°44°45°45°45°45°45°45°46°46°46°46°44°44°45°46°46°49°49°49°49°49°49°26°27°29°30°30°31°31°31°32°32°32°33°34°35°35°35°34°35°36°14°15°15°16°16°17°17°18°18°19°20°21°21°22°22°23°24°24°24°24°24°
6°6°7°7°8°9°
10°10°10°10°10°11°
50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°50°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°40°25°25°25°25°25°25°25°25°25°25°25°25°25°25°25°25°25°25°25°25°25°15°15°15°15°15°15°15°15°15°15°15°15°15°
59°57°56°56°56°56°55°55°55°55°55°54°54°54°54°52°53°52°52°52°51°51°51°51°51°51°52°52°51°50°50°49°49°47°45°45°45°45°45°45°45°45°43°43°42°34°33°33°32°32°31°31°31°31°31°30°29°29°29°29°28°28°26°26°26°26°24°22°22°21°21°21°20°19°19°19°19°18°18°
65°63°62°61°61°60°60°59°59°59°59°59°59°59°59°54°55°55°55°55°54°53°53°53°52°52°59°59°58°57°56°55°55°53°48°48°48°48°48°48°48°48°46°44°44°42°40°40°39°39°38°38°37°37°37°36°35°35°35°35°32°30°29°29°28°28°28°27°27°26°26°26°25°24°24°23°21°21°21°
C43
GE
NE
RA
LP
UR
PO
SE
FLAT
SP
RAY
SPRAY NOZZLES
PERFORMANCE DATA
ORDERING INFORMATION
DESIGN FEATURES
DIMENSIONS & WEIGHTS
1560 ⓦ ⓦ1570 ⓦ ⓦ15100 ⓦ ⓦ
15° 15120 ⓦ15150 ⓦ15200 ⓦ15250 ⓦ15500 ⓦ151000 ⓦ0003 ⓦ ⓦ0004 ⓦ ⓦ0005 ⓦ ⓦ0006 ⓦ ⓦ0008 ⓦ ⓦ0010 ⓦ ⓦ0015 ⓦ ⓦ0020 ⓦ ⓦ ⓦ0030 ⓦ ⓦ0040 ⓦ ⓦ0050 ⓦ0060 ⓦ0070 ⓦ ⓦ
0° 0080 ⓦ ⓦ00100 ⓦ00120 ⓦ00150 ⓦ00200 ⓦ00250 ⓦ00350 ⓦ00700 ⓦ001000 ⓦ001100 ⓦ001400 ⓦ001800 ⓦ002000 ⓦ003500 ⓦ
Capa-citySize
VEEJET NOZZLESNOZZLE TYPE/INLET CONNECTION SPRAY ANGLE
0°SOLID STREAM
H-VV H-VVL H-U U1/8 1/4 1/8 1/4 1/8 1/4 3/8 1/2 3/4 1 1-1/4 2
BRASS NONE ⓦ ⓦ ⓦ ⓦ ⓦMILD STEEL I ⓦ ⓦ ⓦ303 STAINLESS STEEL SS ⓦ ⓦ ⓦ ⓦ ⓦ316 STAINLESS STEEL 316 SS ⓦ ⓦPolyvinyl Chloride PVC ⓦ
MATERIAL MATERIALCODE
H-VV H-VVL H-U U 11370
VEEJET®JET
STABILIZERS
MATERIALSVEEJET
SPRAY NOZZLE
H 1/4 VV - SS 11010NozzleType
CapacitySize
MaterialCode
NozzleTypePrefix
(H only)
InletConnectionPipe Size
Based on largest/heaviest version of each type.
VeeJet nozzle strainers areavailable with either brass or 303stainless steel bodies and comewith 304 stainless steel screens.These strainers will fit in any H!\° VV or H!\› VV VeeJet nozzle.They provide an effective meansof straining out particles that aretoo large to pass through thenozzle orifice.
VEEJETNOZZLE STRAINER
MESH SELECTIONGUIDE
Equivalent RecommendedOrifice Screen
Diameter Mesh
UP THROUGH.018) (.46 mm) 200
.019) (.47 mm)THROUGH 100
.031) (.79 mm)
.032) (.80 mm)AND LARGER 50
FOR NOZZLE STRAINERSERIES ORDER NO.H 1\8 VV– 12686-*-**H 1\4 VV– 12687-*-**
*Material Codeno material code = BrassSS = 303 Stainless Steel
**Screen Mesh
E\ŒÁQE\Á‰Q\‰QU\Á‰QO\Á‰QQ\´„E\ˆEE\Á‰RU\Á‰
.041
.047
.053
.058
.067
.073
.092
.106O\Á‰T\´„QQ\Á‰E\ŒÁQE\Á‰QE\Á‰QT\Á‰Q\‰QO\Á‰WQ\Á‰E\ˆU\ŒÁEO\Á‰E\‰WT\´„U\ˆ1
1E\Á‰1E\ˆ
SprayAngleat 40psi
Equiv.OrificeDiam.Inches
CAPACITY(gallons per minute)
5psi
10psi
20psi
30psi
40psi
60psi
80psi
100psi
200psi
300psi
3.54.25.37.18.8
17.735.10.14.18.21.28.35.53.711.11.41.82.12.52.83.54.25.37.18.8
12.4253539506471
125
3.03.55.06.07.5
10.012.5
2550.15.20.25.30.40.50.751.01.52.02.53.03.54.05.06.07.5
10.012.517.5
3550557090
100175
4.24.97.18.5
10.614.117.7
3571.21.28.35.42.56.711.11.42.12.83.54.24.95.67.18.5
10.614.117.7
2550717899
127142247
5.26.18.6
10.413.017.3
224387.26.35.43.52.69.861.31.72.63.54.35.26.16.98.6
10.413.017.3
2230618795
121156173303
6.07.0
10.012.015.020.0
2550
100.30.40.50.60.801.01.52.03.04.05.06.07.08.0
10.012.015.020.0
253570
100110140180200350
7.38.6
12.214.718.4
253161
123.37.49.61.73.981.21.82.53.74.96.17.38.69.8
12.214.718.4
25314386
123135171220245428
8.59.9
14.117.0
21283571
142.42.57.71.851.11.42.12.84.25.77.18.59.9
11.314.117.0
2128355098
142156198254283494
9.511.115.819.0
24324079
158.47.63.79.951.31.62.43.24.76.37.99.5
11.112.615.819.0
24324055
111158174221285316553
13.415.7
2227344456
112223.67.891.11.31.82.23.44.56.79.0
11.213.415.717.9
222734445678
157223246313402447783
16.419.2
2733415568
137273.821.11.41.62.22.74.15.58.2
11.013.716.419.2
22273341556896
192273301383493547958
500psi
20psi
40psi
80psi
200psi
21253542537188
1773531.11.41.82.12.83.55.37.1
10.614.217.7
2125283542537188
124247353389495636706
1240
11°11°13°13°14°14°14°14°14°
15°15°15°15°15°15°15°15°15°
18°18°17°17°17°17°16°16°16°
21°21°18°18°18°18°17°17°17°
H-UNozzle Hex. Nozzle Net
No. Length WeightH1/8U Q\„" U\ˆ" Q\„ oz.H1/4U O\ŒÁ" 1" E\‰ oz.H3/8U QQ\ŒÁ" 1Q\‰" 1Q\„ oz.H1/2U U\ˆ" 1Q\„" 2Q\‰ oz.H3/4U 1Q\ŒÁ" 2" 5 oz.
H-VVNozzle Hex. Nozzle Net
No. Length WeightH1/8VV
Q\„"U\ˆ" Q\„ oz.
H1/8VVL 1QE\´„" E\‰ oz.H1/4VV
O\ŒÁ"WO\´„" E\‰ oz.
H1/4VVL 1Q\„" 1 oz.
UNozzle Diameter Nozzle Net
No. Length Weight1U 1T\ŒÁ" 2Q\„" 9 oz.1-1/4U 1QQ\ŒÁ" 3E\‰" 1Q\‰ lbs.2U 2E\ˆ" 5" 4Q\‰ lbs.
C44
GE
NE
RA
LP
UR
PO
SE
FLAT
SP
RAY
The new natural KYNAR VeeJetspray nozzle provides chemicaland corrosion resistance in anultra-pure material. The natural,non-pigmented KYNAR materialcontains no colorants or fillingswhich makes it especially well-
suited for integrated circuitmanufacturing. Also ideal forPCB manufacturing, this flatspray nozzle is made of naturalpolyvinyldene fluoride (PVDF)thermoplastic.
KYNAR VeeJet nozzles producea tapered edge flat spray patternand are available with pipe
connection sizes of !\°" and !\›"NPT or BSPT. They range in flowrates from .25 gpm to 2.0 gpm at40 psi (.99 l/min to 7.9 l/min at 3bar), and handle temperatures to300°F (150°C) at 100 psi (7 bar).
The nozzle body has standardhex sizes and a flange for easyinstallation and removal using astandard socket wrench.
Flats on the VeeJet nozzlefacilitate proper alignment ofspray pattern.
SPRAY NOZZLES
KYNAR® SERIES
HVV-KY HU-KY
PERFORMANCE DATA
DIMENSIONS & WEIGHTS ORDERING INFORMATION
DESIGN FEATURES
COMMON APPLICATIONSⓦ Integrated circuit
manufacturing
ⓦ PCB manufacturing
ⓦ Washing and rinsing
ⓦ Quenching and cooling
ⓦ Dust suppression
ⓦ Gas scrubbing
ⓦ Deaerating
STANDARD SPRAY NOZZLE
H 1/4 U - KY 8010NozzleType
NozzleTypePrefix
OrificeNo.
MaterialCode
InletConn.Pipe Size
Nozzle Inlet Conn.
Orifice Number
Spray Angle
1/8
1/4
65025650580028003800480068008
801080158020
Nozzle TypeNPT (M) BSPT (M)
HQ\ˆVV-KY
HQ\‰U-KY
HBQ\ˆVV-KY
HBQ\‰U-KY
Q\ˆ
Q\‰
Inlet Connection
AHex
CDia.
LB Flats
InletConnection
10 psi 20 psi 30 psi 40 psi 60 psi 80 psi 100 psi 20 psi 40 psi 80 psi
Equivalent Orifice Dia.
inches
Capacity in gallons per minute
.040
.057
.036
.043
.052
.062
.072
.078
.094
.109
.13
.25
.10
.15
.20
.30
.40
.50
.751.0
.18
.35
.14
.21
.28
.42
.56
.711.11.4
.22
.43
.17
.26
.35
.52
.69
.861.31.7
.25
.50
.20
.30
.40
.60
.80
1.01.52.0
.31
.61
.25
.37
.49
.73
.98
1.21.82.5
.35
.71
.28
.42
.57
.851.1
1.42.12.8
.40
.79
.32
.47
.63
.951.3
1.62.43.2
52°53°69°70°71°72°72°
73°74°74°
65°65°80°80°80°80°80°
80°80°80°
73°72°88°87°86°85°84°
84°83°83°
A Hex
B Flats
CDia.
LLength
NetWt.
E\ˆ"
Q\„"
Q\„"
T\ˆ"
T\ˆ"
E\‰"
U\ˆ"
1"
0.1 oz.
0.2 oz.
C45
GE
NE
RA
LP
UR
PO
SE
FLAT
SP
RAY
NARROW ANGLEHIGH IMPACT
P1⁄8"-3⁄4" NPT or BSPT (M)
ⓦ Washing crushed stone and gravel
ⓦ High impact washing
ⓦ Degreasing
ⓦ Fruit and vegetable washing
ⓦ Paper machine “deckle” spray
SPRAY NOZZLE
FlatJet spray nozzles feature avery high impact flat spraypattern with narrow spray angles.They produce a uniform spraydistribution of medium-sizeddroplets.The FlatJet spraypattern has sharply definededges.
P series FlatJet spray nozzlesoffer a one-piece design with amale pipe thread connection.Large unobstructed flow pas-sage minimizes clogging. Theprecision-machined deflectorplane produces a uniform, highimpact spray pattern.
PRODUCE SKIN REMOVAL
WASHING GRAVEL
DESIGN FEATURES
COMMON APPLICATIONS
ACCESSORIES
Split-Eyelet Pressure Gauge Adjustable Pressure 124 Strainer Control Valves Other AccessoriesConnector Ball Fittings Relief Valves
ⓦ Check Valves
ⓦ Swivel Connectors
SEE SECTION G FORCOMPLETE INFORMATION.
C46
GE
NE
RA
LP
UR
PO
SE
FLAT
SP
RAY
ORDERING INFORMATION
PERFORMANCE DATA
34°42°39°42°43°38°44°46°31°31°32°32°32°34°35°20°18°24°24°26°28°31°29°26°26°26°25°15°
6°8°9°
10°11°11°12°
50°50°50°50°50°50°50°50°40°40°40°40°40°40°40°35°35°35°35°35°35°35°35°35°35°35°35°25°15°15°15°15°15°15°15°15°15°
60°59°60°53°55°59°55°53°50°49°49°49°48°44°44°41°39°40°39°41°38°38°39°40°40°40°40°34°23°19°24°21°20°19°18°18°18°
ⓦ 5010ⓦ ⓦ 5025ⓦ ⓦ 504050° ⓦ 5060ⓦ 50100ⓦ 50125ⓦ 50160ⓦ 50200
ⓦ 4040ⓦ 4050ⓦ 406040° ⓦ 4070ⓦ 4080ⓦ 4090ⓦ 40100
ⓦ 3504ⓦ 3510ⓦ ⓦ 3520ⓦ 3525ⓦ 353035° ⓦ 3540ⓦ 3550ⓦ 3560ⓦ 3580ⓦ 35100ⓦ 35160ⓦ 3520025° ⓦ 2540
ⓦ 1510ⓦ 1520ⓦ 1530ⓦ 154015° ⓦ 1550ⓦ 1560ⓦ 1580ⓦ 15100ⓦ 15200
Nozzle InletConnection
NPT or BSPT (M)
1/8 1/4 3/8 1/2 3/4
CapacitySize
SPRAYANGLE
DIMENSIONS
BDeflec-
tionAngle
NetWeight
1 oz.3 oz.3 oz.5 oz.
11Q\„ oz.11 oz.11 oz.11 oz.5 oz.7 oz.8 oz.9 oz.9 oz.8 oz.9 oz.Q\„ oz.2 oz.2 oz.3 oz.3 oz.4 oz.5 oz.8 oz.9 oz.9 oz.
1Q\‰ lbs.1Q\‰ lbs.
4 oz.2 oz.2 oz.4 oz.8 oz.6 oz.
12 oz.12 oz.14 oz.1 lbs.
Material Material Codeno material code = BrassI = Mild SteelSS = 303 Stainless Steel316SS = 316 Stainless Steel
STANDARDSPRAY NOZZLE
3/8 P - SS 5060NozzleType
CapacitySize
MaterialCode
InletConnectionPipe Size
DIMENSIONS
ANGLE DEDISPERSION
QQQQ
CAPACITY(gallons per minute)
15psi
20psi
30psi
40psi
60psi
80psi
100psi
150psi
.611.52.53.76.17.69.8
12.22.53.13.74.34.95.56.1.25.611.21.51.82.53.13.74.96.19.8
12.22.5
1.82.53.13.74.96.1
12.2
.711.82.84.27.18.8
11.314.22.83.54.25.05.76.47.1.28.711.41.82.12.83.54.25.77.1
11.314.22.8.711.42.12.83.54.25.77.1
14.2
.872.23.55.28.7
10.813.917.03.54.35.26.16.97.88.7.35.871.72.22.63.54.35.26.98.7
13.917.03.5.871.72.63.54.35.26.98.7
17.0
1.02.54.06.0
10.012.516.0
204.05.06.07.08.09.0
10.0.401.02.02.53.04.05.06.08.0
10.016.0
204.01.02.03.04.05.06.08.0
10.020
1.23.14.97.3
12.215.319.6
244.96.17.38.69.8
11.012.2.491.22.43.13.74.96.17.39.8
12.219.6
244.91.22.43.74.96.17.39.8
12.224
1.43.55.78.5
14.117.7
23285.77.18.59.9
11.312.714.1.571.42.83.54.25.77.18.5
11.314.1
23285.71.42.84.25.77.18.5
11.314.1
28
1.63.96.39.5
15.819.7
25326.38.09.5
11.012.614.215.8.631.63.23.94.76.38.09.5
12.615.8
25326.31.63.24.76.38.09.5
12.615.8
32
1.94.87.7
11.619.4
2431397.79.7
11.613.515.517.419.4.771.93.94.85.87.79.7
11.615.519.4
31397.71.93.95.87.79.7
11.615.519.4
39
T\Á‰U\Á‰O\Á‰E\ŒÁQT\Á‰QU\Á‰QO\Á‰WQ\Á‰
O\Á‰T\´„QQ\Á‰QE\Á‰QE\Á‰U\´„QT\Á‰
E\Á‰T\Á‰U\Á‰U\Á‰Q\ˆO\Á‰T\´„QQ\Á‰QE\Á‰QT\Á‰QO\Á‰WQ\Á‰
O\Á‰
T\Á‰U\Á‰Q\ˆO\Á‰QQ\Á‰E\ŒÁQE\Á‰QT\Á‰WQ\Á‰
SprayAngleat 40psi
OrificeDiam.Nom.Inches
AInches
1U\´„1T\ˆ
1WU\´„2T\´„
2WU\´„2WU\´„2WU\´„2WU\´„
2E\ˆ2Q\„
2WU\´„2EQ\´„3Q\´„3Q\´„
3QE\´„
WO\´„1U\ŒÁ
1WQ\´„1QT\ŒÁ2Q\ŒÁ2O\´„2Q\„2U\ˆ
3E\ŒÁ3Q\„4Q\„
4QE\ŒÁ
2O\ŒÁ
1U\ˆ2Q\ˆ
2WU\´„3T\ˆ
3O\ŒÁ4QT\ŒÁ
5Q\ˆ5E\ˆ7Q\„
60°42°45°37°40°38°37°32°35°33°33°29°26°28°28°40°36°30°28°28°26°23°27°24°19°23°22°25°22°19°25°18°15°14°14°14°14°
T\ˆE\‰E\‰1
1Q\‰1Q\‰1Q\‰1Q\‰
U\ˆ111111
U\ŒÁT\ˆE\‰E\‰E\‰U\ˆU\ˆ111
1Q\‰1Q\‰
E\‰
T\ˆT\ˆE\‰U\ˆU\ˆ111
1Q\‰
CBar SizeInches
sq.15psi
40psi
100psi
K
C47
GE
NE
RA
LP
UR
PO
SE
FLAT
SP
RAY
WIDE ANGLEFOR LIQUID, AIR AND STEAM
ORDERING INFORMATION
DESIGN FEATURES COMMON APPLICATIONS
DIMENSIONS & WEIGHTS
AIR & STEAM
LIQUID
K1⁄8"-1" NPT or BSPT (M)
Capac-ity
Size
StandardMaterials Material Code
no material code = Brass
SS = 303 Stainless Steel
316SS = 316 Stainless Steel
PVC = Polyvinyl Chloride
ⓦ Spraying eliminator plates
ⓦ Cooling conveyor belts
ⓦ Film washing
ⓦ Water curtain
ⓦ Fire protection
SPRAY NOZZLE
FloodJet spray nozzles feature awide angle flat spray pattern withmedium impact. They produceuniform spray distributions ofmedium-sized droplets.
A round orifice and large,unobstructed flow passagesminimize clogging problems.
FloodJet nozzles are alsosuitable for use with air andsteam. All FloodJet nozzles offera precision-machined deflectorsurface which providesdependable, accurate control ofdeflection and spray angle.
The K series FloodJet nozzlesare precision-machined fromsolid bar stock and have a malepipe thread inlet connection.
SPRAY AGITATION
Based on largest/heaviest version of each type.
FLOODJETSPRAY NOZZLE
1/8 K - SS .50NozzleType
CapacitySize
MaterialCode
InletConnectionPipe Size
73°83°98°86°97°
114°101°115°128°98°
106°110°113°115°119°100°105°111°115°117°120°123°127°120°123°125°129°118°121°124°128°110°118°
83°89°
106°109°108°113°122°112°123°128°119°133°139°113°120°122°125°131°135°110°118°126°130°131°134°137°138°133°136°138°143°127°130°133°139°128°132°
117°122°125°128°125°129°133°126°132°142°134°145°153°123°131°133°136°144°148°121°128°136°140°140°142°146°149°140°145°148°150°135°137°139°145°135°138°
ⓦ .25ⓦ .50ⓦ .75ⓦ 1ⓦ 1.5ⓦ ⓦ 2ⓦ ⓦ 2.5ⓦ ⓦ 3ⓦ 4ⓦ ⓦ 5ⓦ ⓦ 7.5ⓦ ⓦ 10ⓦ ⓦ 12ⓦ ⓦ 15ⓦ ⓦ 18ⓦ ⓦ 20ⓦ 22ⓦ 24ⓦ 27ⓦ 30ⓦ 35ⓦ ⓦ 40ⓦ 45ⓦ 50ⓦ 60ⓦ 70ⓦ 80ⓦ 90ⓦ 100ⓦ 110ⓦ ⓦ 120ⓦ 140ⓦ 160ⓦ 180ⓦ 210ⓦ 300ⓦ 450
Nozzle Inlet Connection NPT or BSPT (M)
1/8 1/4 3/8 1/2 3/4 1
CapacitySize
SPRAYANGLE
75°DeflectionAngle
Hex.
PipeConnection
K
NozzleSize
1/8K 9/16" 17/16" 1 oz.1/4K 9/16" 113/32" 1 oz.3/8K 11/16" 13/4" 2 oz.1/2K 7/8" 2" 4 oz.3/4K 11/2" 29/16" 14 oz.1K 17/8" 35/8" 2 lbs.
Hex. Net Weight
OrificeDiam.Nom.Inches 10 20 40 50 10 20 40 50 10 50
psi psi psi psi psi psi psi psi psi psi
CAPACITY—in scfm(standard cubic feet
per minute)
CAPACITY—forSTEAM
(pounds per hour)
COVERAGEat 6"
Distancefrom Nozzle
.50 .024 .16 .22 .35 .41 .35 .49 .78 .92 2" 5"
.75 .028 .22 .31 .50 .59 .50 .70 1.1 1.3 2Q\„" 5Q\„"
1 .033 .34 .48 .75 .89 .76 1.1 1.7 2.0 3" 6"
1.5 .041 .54 .75 1.2 1.4 1.2 1.7 2.7 3.2 3Q\„" 6Q\„"
2 .046 .68 .95 1.5 1.8 1.5 2.1 3.4 4.0 4" 7Q\„"
2.5 .052 .94 1.3 2.1 2.5 2.1 2.9 4.7 5.6 4" 7Q\„"
3 .057 1.1 1.6 2.5 3.0 2.5 3.6 5.7 6.7 5" 8"
4 .065 1.4 2.0 3.0 3.8 3.1 4.5 6.8 8.6 5" 9"
5 .073 1.9 2.6 4.2 4.9 4.2 5.9 9.3 11.0 6" 10Q\„"
7.5 .091 2.8 4.0 6.3 7.5 6.4 8.9 14.2 16.8 6" 10Q\„"
10 .104 3.9 5.5 8.6 10.2 8.7 12.2 19.3 22.9 7" 11"
15 .129 6.4 9.0 14.3 16.8 14.3 20.2 31.9 37.7 7" 12"
20 .148 7.9 11.2 17.7 20.9 17.7 25.0 39.5 46.7 8Q\„" 14Q\„"
30 .180 11.4 16.0 25.4 30.0 25.5 35.7 56.9 67.2 8Q\„" 15Q\„"
CAPACITY(gallons per minute)
3psi
5psi
7psi
10psi
15psi
20psi
30psi
40psi
60psi
.27
.41
.55
.66
.82
.991.11.21.31.51.61.92.22.52.73.33.84.44.95.56.06.67.78.8
10.011.516.5
25
.18
.21
.28
.35
.53
.71
.851.11.31.41.61.71.92.12.52.83.23.54.25.05.66.47.17.88.59.9
11.312.714.8
2132
.12
.17
.21
.25
.33
.42
.63
.841.01.31.51.71.82.02.32.52.93.33.84.25.05.96.77.58.49.2
10.011.713.415.117.5
2538
.075.10.15.20.25.30.40.50.751.01.21.51.82.02.22.42.73.03.54.04.55.06.07.08.09.0
10.011.012.014.016.018.021.0
3045
.03
.06
.09
.12
.18
.24
.31
.37
.49
.61
.921.21.51.82.22.42.72.93.33.74.34.95.56.17.38.69.8
11.012.313.514.717.119.6
22263755
.035.07.11.14.21.28.35.42.57.711.11.41.72.12.52.83.13.43.84.25.05.76.47.08.59.9
11.312.714.115.617.019.8
2325304364
.04
.08
.13
.17
.26
.35
.43
.52
.69
.871.31.72.12.63.13.53.84.24.75.16.16.97.88.7
10.412.113.815.617.319.0
21242831365278
.05
.10
.15
.20
.30
.40
.50
.60
.801.01.52.02.43.03.64.04.44.85.46.07.08.09.0
10.012.014.016.018.0
202224283236426090
.06
.12
.18
.24
.37
.49
.61
.73
.981.21.82.52.93.74.44.95.45.96.67.38.69.8
11.012.314.717.219.6
202427293439445174
111
.016
.024
.028
.033
.041
.046
.052
.057
.065
.073
.091
.104
.116
.129
.141
.148
.156
.161
.173
.180
.196
.209
.221
.238
.256
.281
.297
.316
.332
.348
.368
.406
.437
.453
.484
.578
.703
OrificeDiam.Nom.Inches 7
psi20psi
60psi
QQQQ
NozzleLength
C48
FLAT
SP
RAY
MEG1⁄8) - 1⁄4) NPT or
BSPT (M)
MEF
1⁄4) NPT or BSPT (M)
23990Adjustable WashJetspray angles 0°-80°
24055Adjustable high/low
WashJet nozzlespray angles 0°-80°
MEG-SSTCtungsten carbide
orifice insert1⁄4) NPT or BSPT (M)
QCMEG1⁄4) Quick connect
spray nozzles
HIGH PRESSURE WASHING300 TO 4000* PSI (20 TO 275 BAR)
SPRAY NOZZLES
DESIGN FEATURES
ACCESSORIES COMMON APPLICATIONS
ⓦ High Pressure Automatic Guns
ⓦ Extensions
ⓦ Swivels
SEE SECTION E FOR COMPLETE INFORMATION.
WashJet highpressure spraynozzles feature ahigh impact solidstream or flatspray patternwith spray anglesof 0° to 65°.
WashJet nozzles produce auniform spray distribution ofmedium-sized droplets.TheWashJet nozzle orifice is precision-machined to accurately controlflow rates.The orifice is recessedto protect against damage.
WashJet nozzles feature aninternal guide vane whichstabilizes liquid turbulence toprovide maximum spray integrityand impact.
Milled flats on the WashJetnozzle body are parallel to theplane of the spray pattern,providing a quick visual referencefor spray alignment.
MEG NPT or BSPT (M) andWEG NPT or BSPT (F) series
WashJet nozzles featurespecially hardened stainlesssteel construction for longer wearlife and flow control accuracy.
MEG-TC WashJet spray nozzlesprovide the same performancefeatures as standard MEGnozzles with tungsten carbideorifice inserts for maximumerosion resistance.
QCMEG nozzles include colorcoded protective nozzle guards.The nozzles incorporate a 1⁄4)quick connect design. Sprayangles range from solid streamto a 40° flat spray.
MEF NPT or BSPT (M) FoamJetnozzle features hardenedstainless steel construction forlonger wear life and accurateflow control.
FoamJet nozzle is designed foruse in pressure washapplications.
At low pressures the FoamJetnozzles produce an aerated
foam in a 40° flat spray pattern.At high pressures, they producea high impact 40° flat spray like that of the standard MEGWashJet nozzle.
23990 Adjustable WashJetnozzle provides spray anglesfrom solid stream to an 80° flatspray pattern to 2500 psi (175bar). The model 23990 nozzlefeatures a hardened stainlesssteel orifice for wear-resistance,long life. The outer covering ismade of polypropylene for addi-tional protection. See PressureWash Bulletin No. 270 for more details.
24055 Adjustable high/lowWashJet provides two pressuresettings and adjustable sprayangles from solid stream to 80°flat spray pattern.
Pressure is adjusted by a slidingvalve. Spray angles are changedby rotating the outer cover. SeePressure Wash Bulletin No. 270for more details.
WASHING OFFLABELS
RINSINGEQUIPMENT
*For applications at higherpressures consult factory forrecommendations and perfor-mance data.
Hand Guns
Other Accessories
GE
NE
RA
LP
UR
PO
SE
C49
GE
NE
RA
LP
UR
PO
SE
FLAT
SP
RAY
NOZZLE TYPE and SPRAY ANGLE1/8 MEG 1/4 MEG 1/8 WEG 1/4 WEG 1/4 MEG-SSTC
*00° 15° 25° 40° 50° 65°ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦⓦⓦ ⓦ
ⓦ ⓦ ⓦ
ⓦ
ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦⓦⓦ
ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦⓦⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ
ⓦ
ⓦ ⓦ ⓦ ⓦ
ⓦ
ⓦ ⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦⓦⓦ ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ ⓦ
ⓦ ⓦ ⓦⓦ ⓦ ⓦ ⓦ
ⓦ
*00° 15° 25° 40° 50° 65°
*00° 15° 25° 40° 50° 65°
*00° 15° 25° 40° 50° 65°
*00° 15° 25° 40° 50° 65°
Capac-ity
Size
0203040450505506065070750808509095101111512125131415161820253035405060708090
FoamJet®
MEF
40°
QUICK CONNECT TYPEQCMEG
*00° 15° 25° 40°
ⓦ ⓦ ⓦ ⓦ 04ⓦ ⓦ ⓦ ⓦ 045
ⓦ ⓦ ⓦ ⓦ ⓦ 05ⓦ ⓦ ⓦ ⓦ 055ⓦ ⓦ ⓦ ⓦ 06ⓦ ⓦ ⓦ ⓦ 065
ⓦ ⓦ ⓦ ⓦ ⓦ 07ⓦ ⓦ ⓦ ⓦ 075
ⓦ ⓦ ⓦ ⓦ ⓦ 08ⓦ ⓦ ⓦ 09
ⓦ ⓦ ⓦ ⓦ ⓦ 10ⓦ ⓦ ⓦ ⓦ 12
*00° = Solid Stream
*00° = Solid Stream Tabulation is based on spraying water at temperature of 70°F (21°C).
23990 ADJUSTABLE WashJet® NOZZLE
CapacitySize
0203040505506065070750810
24055 HIGH-LOW ADJUSTABLE WashJet® NOZZLE
CapacitySize
LOW PRESSURESETTING
0203040505506065070750810
CapacitySize
STANDARDSPRAY NOZZLE
1/4 MEG- 15 04Inlet
Connec-tionPipeSize
NozzleType
SprayAngle
CapacitySize
PERFORMANCE DATA
ORDERING INFORMATION
CAPACITY(gallons per minute)
.55
.821.11.21.41.51.61.81.92.12.22.32.52.62.73.03.13.33.43.63.84.14.44.95.56.98.29.6
11.013.716.419.2
2225
.63
.951.31.41.61.71.92.12.22.42.52.72.93.03.23.53.63.84.04.14.44.75.15.76.37.99.5
11.112.615.8
19222528
.711.11.41.61.81.92.12.32.52.72.83.03.23.43.53.94.14.24.44.64.95.35.76.47.18.9
10.612.414.117.7
21252832
.771.21.61.71.92.12.32.52.72.93.13.33.53.73.94.34.54.64.85.05.45.86.27.07.79.7
11.613.615.519.4
23273135
.841.31.71.92.12.32.52.72.93.13.43.63.84.04.24.64.85.05.25.45.96.36.77.58.4
10.512.514.616.7
2125293338
.891.41.82.02.22.52.72.93.13.43.63.84.04.24.54.95.15.45.65.86.36.77.28.08.9
11.213.415.717.9
2227313640
1000psi
1500psi
2000psi
2500psi
3000psi
1.01.52.02.32.52.83.03.33.53.84.04.34.54.85.05.55.86.06.36.57.07.58.09.0
10.012.515.017.5
202530354045
1.21.82.52.83.13.43.74.04.34.64.95.25.55.86.16.77.07.37.78.08.69.29.8
11.012.315.318.4
21243137434955
1.42.12.83.23.53.94.24.64.95.35.76.06.46.77.17.88.18.58.89.29.9
10.611.312.714.117.7
2125283542495764
1.62.43.23.64.04.34.75.15.55.96.36.77.17.57.98.79.19.59.9
10.311.111.912.614.215.819.8
2428324047556371
1.72.63.53.94.34.85.25.66.16.56.97.47.88.28.79.5
10.010.410.811.312.113.013.915.617.3
222630354352616978
CAPACITY(gallons per minute)
Spray Angle at 40 psi
CAPACITY (gallons per minute)
300psi
500psi
700psi
800psi
1000psi
1500psi
2000psi
2500psi
.55
.821.11.41.51.61.81.92.12.22.7
.711.11.41.81.92.12.32.52.72.83.5
.841.31.72.12.32.52.72.93.13.44.2
.891.41.82.22.52.72.93.13.43.64.5
1.01.52.02.52.83.03.33.53.84.05.0
1.21.82.53.13.43.74.04.34.64.96.1
1.42.12.83.53.94.24.64.95.35.77.1
1.62.43.24.04.34.75.15.55.96.37.9
CAPACITY High Setting (gallons per minute)
500psi
600psi
700psi
800psi
1000psi
1500psi psi gpm
.711.11.41.81.92.12.32.52.72.83.5
.771.21.61.92.12.32.52.72.93.13.9
.841.31.72.12.32.52.72.93.13.44.2
.891.41.82.22.52.72.93.13.43.64.5
1.01.52.02.52.83.03.33.53.84.05.0
1.21.82.53.13.43.74.04.34.64.96.1
40100200300
2.13.34.75.7
1.11.21.41.51.61.81.92.12.22.52.73.3
1.31.41.61.71.92.12.22.42.52.93.23.8
1.41.61.81.92.12.32.52.72.83.23.54.2
1.61.71.92.12.32.52.72.93.13.53.94.6
1.71.92.12.32.52.72.93.13.43.84.25.0
1.82.02.22.52.72.93.13.43.64.04.55.4
2.02.32.52.83.03.33.53.84.04.55.06.0
2.52.83.13.43.74.04.34.64.95.56.17.3
2.83.23.53.94.24.64.95.35.76.47.18.5
3.23.64.04.34.75.15.55.96.37.17.99.5
3.53.94.34.85.25.66.16.56.97.88.710.4
3.74.24.75.15.66.16.57.07.58.49.411.2
4.04.55.05.56.06.57.07.58.09.010.012.0
300psi
400psi
500psi
600psi
700psi
800psi
1000psi
1500psi
2000psi
2500psi
3000psi
3500psi
4000psi
300psi
400psi
500psi
600psi
700psi
800psi
C50
RotoClean Connection Gasket No. ForNo. Thread Size
106A-2 220A-2 225-2 11⁄16-16 7894-NY < S.S. CO. 24 AUAGRACO
* 106A-3 3⁄4-16 19078-NY BALCRANK106A-6 220A-6 225-6 7⁄8-14 11918-NY GRACO106A-8 225-8 3⁄8 NPS 12552-NY NORDSON106A-9 225-9 3⁄8 NPS 10660-NY DEVILBISS
** 106A-10 220A-10 225-10 3⁄4-20 19079-NY BINKS 50106A-11 225-11 M18 x 1 Metric 7894-NY ATLAS COPCO106A-12 3⁄8 N.P.S. 7894-NY SPEE-FLO
106A-13 225-13 M18 x 1 Metric 7894-NY < DEICKE &KOPPERSCHMIDT
106A-14 225-14 1-14 9632-NY S.S. CO. 44 AUA106A-15 225-15 11⁄16-16 12552-NY BINKS 43106A-16 225-16 5⁄8-14 BSPP 11918-NY106A-17 220A-17 225-17 11⁄16-16 13358-NY WAGNER
*Use Gasket No. 7894-NY for 106A-3**Use Gasket No. 12552-NY for 106A-10
The RotoClean attachment issmall and lightweight and oper-ates at pressures up to 4000 psi(275 bar). Models are available tofit all leading brands of airlessspray guns.
FLAT
SP
RAY
FOR AIRLESS SPRAY PAINTING GUNS
106A 220A
For106A
For 220A
* Tabulated capaci-ties based on water.
** SPRAY PATTERNWIDTH IS BASEDON LIQUID WITH VISCOSITY of 20seconds #4 ZahnCup…spraying at110 bar. Coverageswill vary withviscosities andpressures.
***Available onspecial request.
RotoClean KITS
for 106A for 220A
Orifice CylinderInsert Kit Sub-Asb.
RotoClean KITS
for 106A for 220A
Orifice CylinderInsert Kit Sub-Asb.
ATTACHMENTS
The RotoClean attachment pro-vides a quick and easy methodof unclogging spray tips withoutremoving them from the spraygun in airless painting and highpressure spraying applications.
The RotoClean attaches to the spray gun and includes atungsten carbide orifice insertwhich can be rotated 180° by theRotoClean handle to face theopposite direction.This rotationallows obstruction to be blownout the larger opening in theback of the tip as liquid passesthrough the spray gun.
COMPLETE 220A ROTOCLEAN ASSEMBLYROTOCLEAN CYLINDER
NUMBER SUB-ASSEMBLY
AA 220A-2 + 18130-RC 2FCylinder
Sub-Assembly
COMPLETE 106A ROTOCLEAN ASSEMBLYROTOCLEAN ORIFICE
NUMBER INSERT KIT
AA 106A-2 + RC 2FOrifice
Insert Kit
INSERT KITS
PERFORMANCE DATA
ORDERING INFORMATION
DESIGN FEATURES
WG WG .013 .09 .12 .15 .18 16Q\„"WH WH .015 .12 .16 .20 .23 17"WI WI .016 .14 .20 .24 .28 18"WJ WJ .018 .18 .25 .30 .36 19"WK WK .021 .24 .33 .41 .47 21"WA WA .023 .28 .40 .49 .57 22"WL WL .026 .35 .50 .61 .72 23"WM WM .031 .53 .75 .91 1.1 25"WN WN .036 .71 1.0 1.2 1.4 26"WO .043 1.1 1.5 1.8 2.1 27"WP .052 1.4 2.0 2.5 2.8 28"WQ .057 1.8 2.5 3.1 3.5 28"WR .062 2.1 3.0 3.7 4.2 28"WS .067 2.5 3.5 4.3 5.0 28"WT .072 2.8 4.0 4.9 5.7 28"WU .076 3.2 4.5 5.5 6.4 28"WV .078 3.5 5.0 6.1 7.1 28"WX .089 4.3 6.0 7.4 8.5 28"
9F 9F .011 .06 .08 .10 .12 13"9G 9G .013 .09 .12 .15 .18 14"9H 9H .015 .12 .16 .20 .23 15"9I 9I .016 .14 .20 .24 .28 16"9J 9J .018 .18 .25 .30 .36 17"9K 9K .021 .24 .33 .41 .47 19"9A 9A .023 .28 .40 .49 .57 19"9L 9L .026 .35 .50 .61 .72 21"9M 9M .031 .53 .75 .91 1.1 21"9N 9N .036 .71 1.0 1.2 1.4 22"9O .043 1.1 1.5 1.8 2.1 22"9P .052 1.4 2.0 2.5 2.8 23"9Q .057 1.8 2.5 3.1 3.5 23"9R .062 2.1 3.0 3.7 4.2 23"
Equiv-alent
OrificeDiam.Inches
Approx.**Spray Pattern
Width (at 1 footdistance)
CAPACITY*(gallons per minute)
500 1000 1500 2000psi psi psi psi
9S .067 2.5 3.5 4.3 5.0 23"9T .072 2.8 4.0 4.9 5.7 23"9U .076 3.2 4.5 5.5 6.4 23"9V .078 3.5 5.0 6.1 7.1 23"9W .085 3.9 5.5 6.7 7.8 23"9X .089 4.3 6.0 7.4 8.5 23"9Z .099 5.3 7.5 9.2 10.6 23"
8E 8E .009 .039 .055 .067 .078 10Q\„"8F 8F .011 .06 .08 .10 .12 11Q\„"8G 8G .013 .09 .12 .15 .18 12Q\„"8H 8H .015 .12 .16 .20 .23 13"8I 8I .016 .14 .20 .24 .28 14"8J 8J .018 .18 .25 .30 .36 15"8K 8K .021 .24 .33 .41 .47 17"8A 8A .023 .28 .40 .49 .57 17"8L 8L .026 .35 .50 .61 .72 19"8M 8M .031 .53 .75 .91 1.1 19"8N 8N .036 .71 1.0 1.2 1.4 19"8O .043 1.1 1.5 1.8 2.1 19"8P .052 1.4 2.0 2.5 2.8 19"8Q .057 1.8 2.5 3.1 3.5 19"8R .062 2.1 3.0 3.7 4.2 19"8S .067 2.5 3.5 4.3 5.0 19"8T .072 2.8 4.0 4.9 5.7 19"8U .076 3.2 4.5 5.5 6.4 19"8V .078 3.5 5.0 6.1 7.1 19"8W .085 3.9 5.5 6.7 7.8 19"8X .089 4.3 6.0 7.4 8.5 19"*** .093 4.6 6.5 8.0 9.2 19"*** .096 4.9 7.0 8.6 9.9 19"8Z .099 5.3 7.5 9.2 10.6 19"
7G 7G .012 .08 .11 .14 .16 11Q\„"7I 7I .016 .14 .20 .24 .28 13"
Equiv-alent
OrificeDiam.Inches
Approx.**Spray Pattern
Width (at 1 footdistance)
CAPACITY*(gallons per minute)
500 1000 1500 2000psi psi psi psi
GE
NE
RA
LP
UR
PO
SE
C51
GE
NE
RA
LP
UR
PO
SE
FLAT
SP
RAY
PERFORMANCE DATA
RotoClean® ASSEMBLIES (CONT.)
RotoClean KITS
for 106A for 220A
Orifice CylinderInsert Kit Sub-Asb.
RotoClean KITS
for 106A for 220A
Orifice CylinderInsert Kit Sub-Asb.
* Tabulated capacities based on water.** SPRAY PATTERN WIDTH IS BASED ON LIQUID WITH VISCOSITY of 20 seconds #4
Zahn Cup …spraying at 110 bar. Coverages will vary with viscosities and pressures.*** Available on special request.
6D 6D .007 .028 .04 .049 .057 8Q\„"6E 6E .009 .039 .055 .067 .078 9Q\‰"6F 6F .011 .06 .08 .10 .12 10"6G 6G .013 .09 .12 .15 .18 10Q\„"6H 6H .015 .12 .16 .20 .23 11"6I 6I .016 .14 .20 .24 .28 12"*** *** .017 .16 .22 .27 .31 12Q\„"6J 6J .018 .18 .25 .30 .36 13"*** *** .019 .19 .28 .34 .39 13"6K 6K .021 .24 .33 .41 .47 15"6A 6A .023 .28 .40 .49 .57 15"6L 6L .026 .35 .50 .61 .72 16"6M 6M .031 .53 .75 .91 1.1 16"6N 6N .036 .71 1.0 1.2 1.4 16"6O .043 1.1 1.5 1.8 2.1 16"6P .052 1.4 2.0 2.5 2.8 16"6Q .057 1.8 2.5 3.1 3.5 16"6R .062 2.1 3.0 3.7 4.2 16"6S .067 2.5 3.5 4.3 5.0 16"6T .072 2.8 4.0 4.9 5.7 16"6U .076 3.2 4.5 5.5 6.4 16"6V .078 3.5 5.0 6.1 7.1 16"6W .085 3.9 5.5 6.7 7.8 16"6X .089 4.3 6.0 7.4 8.5 16"*** .093 4.6 6.5 8.0 9.2 16"*** .096 4.9 7.0 8.6 9.9 16"6Z .099 5.3 7.5 9.2 10.6 16"
5D 5D .007 .028 .04 .049 .057 7E\‰"5E 5E .009 .039 .055 .067 .078 8"5F 5F .011 .06 .08 .10 .12 8Q\„"5G 5G .013 .09 .12 .15 .18 9"5H 5H .015 .12 .16 .20 .23 10"5I 5I .016 .14 .20 .24 .28 10Q\„"*** *** .017 .16 .22 .27 .31 10Q\„"5J 5J .018 .18 .25 .30 .36 11"*** *** .019 .19 .28 .34 .39 11"5K 5K .021 .24 .33 .41 .47 12"5A 5A .023 .28 .40 .49 .57 13"5L 5L .026 .35 .50 .61 .72 14"5M 5M .031 .53 .75 .91 1.1 14"5N 5N .036 .71 1.0 1.2 1.4 14"5O .043 1.1 1.5 1.8 2.1 14"5P .052 1.4 2.0 2.5 2.8 14"5Q .057 1.8 2.5 3.1 3.5 14"5R .062 2.1 3.0 3.7 4.2 14"5S .067 2.5 3.5 4.3 5.0 14"5T .072 2.8 4.0 4.9 5.7 14"5V .078 3.5 5.0 6.1 7.1 14"5Z .099 5.3 7.5 9.2 10.6 14"
4B 4B .005 .014 .020 .025 .028 6Q\„"4C 4C .006 .021 .030 .037 .042 6Q\„"4D 4D .007 .028 .040 .049 .057 6Q\„"4E 4E .009 .039 .055 .067 .078 7"4F 4F .011 .06 .08 .10 .12 7Q\„"4G 4G .013 .09 .12 .15 .18 8"4H 4H .015 .12 .16 .20 .23 8Q\„"4I 4I .016 .14 .20 .24 .28 9"*** *** .017 .16 .22 .27 .31 9Q\„"4J 4J .018 .18 .25 .30 .36 10"*** *** .019 .19 .28 .34 .39 10"4K 4K .021 .24 .33 .41 .47 11"4A 4A .023 .28 .40 .49 .57 11"4L 4L .026 .35 .50 .61 .72 12"*** *** .029 .46 .65 .80 .92 12"4M 4M .031 .53 .75 .91 1.1 12"4N 4N .036 .71 1.0 1.2 1.4 12"4O .043 1.1 1.5 1.8 2.1 12"4P .052 1.4 2.0 2.5 2.8 12"4Q .057 1.8 2.5 3.1 3.5 12"4R .062 2.1 3.0 3.7 4.2 12"4S .067 2.5 3.5 4.3 5.0 12"4T .072 2.8 4.0 4.9 5.7 12"4U .076 3.2 4.5 5.5 6.4 12"4Z .099 5.3 7.5 9.2 10.6 12"
Equiv-alent
OrificeDiam.Inches
Approx.**Spray Pattern
Width (at 1 footdistance)
CAPACITY*(gallons per minute)
500 1000 1500 2000psi psi psi psi
3B 3B .005 .014 .020 .025 .028 5"3C 3C .006 .021 .030 .037 .042 5"3D 3D .007 .028 .040 .049 .057 5Q\„"3E 3E .009 .039 .055 .067 .078 5Q\„"3F 3F .011 .06 .08 .10 .12 6"3G 3G .013 .09 .12 .15 .18 6"3H 3H .015 .12 .16 .20 .23 7"3I 3I .016 .14 .20 .24 .28 7"3J 3J .018 .18 .25 .30 .36 7"*** *** .019 .19 .28 .34 .39 7"3K 3K .021 .24 .33 .41 .47 8"3A 3A .023 .28 .40 .49 .57 8Q\„"3L 3L .026 .35 .50 .61 .72 9"3M 3M .031 .53 .75 .91 1.1 9"3N 3N .036 .71 1.0 1.2 1.4 9"3O .043 1.1 1.5 1.8 2.1 9"3P .052 1.4 2.0 2.5 2.8 9"3R .062 2.1 3.0 3.7 4.2 9"3T .072 2.8 4.0 4.9 5.7 9"
2B 2B .005 .014 .020 .025 .028 4"2C 2C .006 .021 .030 .037 .042 4"2D 2D .007 .028 .040 .049 .057 4Q\„"2E 2E .009 .039 .055 .067 .078 4Q\„"2F 2F .011 .06 .08 .10 .12 5"2G 2G .013 .09 .12 .15 .18 5"2H 2H .015 .12 .16 .20 .23 5Q\„"2I 2I .016 .14 .20 .24 .28 6"*** *** .017 .16 .22 .27 .31 6"2J 2J .018 .18 .25 .30 .36 6"2K 2K .021 .24 .33 .41 .47 6Q\„"2A 2A .023 .28 .40 .49 .57 7"2L 2L .026 .35 .50 .61 .72 7"2M 2M .031 .53 .75 .91 1.1 7"2N 2N .036 .71 1.0 1.2 1.4 7"2O .043 1.1 1.5 1.8 2.1 7"2P .052 1.4 2.0 2.5 2.8 7"2Q .057 1.8 2.5 3.1 3.5 7"2R .062 2.1 3.0 3.7 4.2 7"2T .072 2.8 4.0 4.9 5.7 7"
1B 1B .005 .014 .020 .025 .028 3"1D 1D .007 .028 .040 .049 .057 3Q\„"1E 1E .009 .039 .055 .067 .078 3Q\„"1F 1F .011 .06 .08 .10 .12 4"1G 1G .013 .09 .12 .15 .18 4"1H 1H .015 .12 .16 .20 .23 4Q\„"1I 1I .016 .14 .20 .24 .28 5"1J 1J .018 .18 .25 .30 .36 5"1K 1K .021 .24 .33 .41 .47 5Q\„"1A 1A .023 .28 .40 .49 .57 5Q\„"1L 1L .026 .35 .50 .61 .72 6"1M 1M .031 .53 .75 .91 1.1 6"1N 1N .036 .71 1.0 1.2 1.4 6"
0B 0B .005 .014 .020 .025 .028 2Q\„"0D 0D .007 .028 .040 .049 .057 2Q\„"0E 0E .009 .039 .055 .067 .078 2Q\„"0F 0F .011 .06 .08 .10 .12 3"0G 0G .013 .09 .12 .15 .18 3"0H 0H .015 .12 .16 .20 .23 3Q\„"0I 0I .016 .14 .20 .24 .28 4"0J 0J .018 .18 .25 .30 .36 4"0K 0K .021 .24 .33 .41 .47 4"0L 0L .026 .35 .50 .61 .72 4"0M 0M .031 .53 .75 .91 1.1 4"0N 0N .036 .71 1.0 1.2 1.4 4"
Equiv-alent
OrificeDiam.Inches
Approx.**Spray Pattern
Width (at 1 footdistance)
CAPACITY*(gallons per minute)
500 1000 1500 2000psi psi psi psi
ReferenceFlat Spray TC Tip No.
Handle/Orifice
Insert Kit No. 26081-
611511411311211
813713613513413313213
815715615515415315215
918818718618518418318218
1021921821721621521421321221
1023923823723623523423323223
950017-TC800017-TC500017-TC400017-TC150017-TC
1100025-TC950025-TC800025-TC650025-TC500025-TC400025-TC150025-TC
1100033-TC950033-TC800033-TC650033-TC500033-TC250033-TC150033-TC
1100050-TC950050-TC800050-TC650050-TC500050-TC400050-TC250050-TC150050-TC
1100067-TC950067-TC800067-TC650067-TC500067-TC400067-TC250067-TC150067-TC100067-TC
1100080-TC950080-TC800080-TC650080-TC500080-TC400080-TC250080-TC150080-TC100080-TC
ReferenceFlat Spray TC Tip No.
Handle/Orifice
Insert Kit No. 26081-
1026926726626526426326226
1031931731631531431331231
1036936736636536436336236
9501-TC8001-TC6501-TC5001-TC4001-TC2501-TC1501-TC1001-TC
95015-TC80015-TC65015-TC50015-TC40015-TC25015-TC15015-TC10015-TC
9502-TC8002-TC6502-TC5002-TC4002-TC2502-TC1502-TC1002-TC
C52
GE
NE
RA
LP
UR
PO
SE
FLAT
SP
RAY
The RotoClean attachment forspray guns significantly reducesthe time to replace the spray tipand to unclog the orifice. Toreplace the tip, shut off the gunand rotate and remove thehandle/tip assembly. A newhandle/tip assembly is inserted;no tools are required.
The orifice is unclogged whenthe attachment’s handle isrotated a half turn and the spraygun’s trigger is squeezed. Thishalf turn reverses the flowdirection and clogged particlesare flushed out. With the handleturned back to its original position,spraying can be resumed.
A tungsten carbide diffuserbehind the orifice insert helpsdisperse the liquid stream duringclean-out.
Ideal for airless spray paintingguns, the 225 RotoClean attach-ment is constructed of stainlesssteel. The lugs, handle andgasket are made of nylon. Withinlet connection sizes to fit mostairless painting guns, the attach-ment’s overall length is 2&\⁄fl"(62 mm) and weighs just 3.75 oz.(106 g). 69 spray tip options areoffered and the unit handlespressures to 5000 psi (344 bar).
225 26081
PERFORMANCE DATA
DIMENSIONS
DESIGN FEATURES
ORDERING INFORMATION
ATTACHMENTS
FOR AIRLESS SPRAY PAINTING GUNS
*Tabulated capacities based on water.** Spray pattern width is based on liquid with viscosity of 20 seconds #4 Zahn Cup…
spraying at 1600 psi (110 bar). Coverages will vary with viscosities and pressures.
To order, specify 225 RotoClean attachment number, theinlet connection size, and the handle/orifice kit number.
Example: AA225-XX + 26081-XXXInlet Connection Size
See data sheet 225 (sheet 2)for size options.
Handle/OrificeInsert Kit
TC OrificeInsert
Handle/OrificeInsert Assemblywith Pre-alignedTungstenCarbide Insert
Connection Thread(See page C50)
Gasket
2"
2-7/16"
handle/orifice insert kit
500 psi
1000 psi
1500 psi
2000 psi
Capacity* – Gallons per Minute at Various PressuresOrifice
Dia. inches
Approx.**Spray
Pattern Width at 1Distance
13"11Q\„"8Q\„"7Q\„"5"
16Q\„"14"
12Q\„"10Q\„"
9"8"5"
17"15"13"11"10"7"
5Q\„"
19"17"15"13"11"10"7"5"
21"19"17"15"12"11"8"
6Q\„"5Q\„"
22"19"17"15"13"11"8Q\„"7"
5Q\„"
.011
.013
.015
.018
.021
.023
0.06 0.08 0.10 0.12
0.09 0.12 0.15 0.18
0.12 0.16 0.20 0.23
0.18 0.25 0.30 0.36
0.24 0.33 0.41 0.47
0.28 0.40 0.49 0.57
500 psi
1000 psi
1500 psi
2000 psi
Capacity* – Gallons per Minute at Various PressuresOrifice
Dia. inches
Approx.**Spray
Pattern Width at 1Distance
21"19"16"14"12"9"7"6"
21"19"16"14"12"9"7"6"
22"19"16"14"12"9"7"6"
.026
.031
.036
0.35 0.50 0.61 0.72
0.53 0.75 0.91 1.1
0.71 1.0 1.2 1.4
FINE SPRAY
INDEXFogJet®
Large Capacity/Wide Angle 7N, 7G.................C54
Hydraulic AtomizingFine Spray/Hollow Cone LN, LNN-W, LN-D,
N, NW, M............ C55
FogJet®
Large Capacity/Narrow Angle FF, F.................... C56
SPRAY NOZZLES
C54
GE
NE
RA
LP
UR
PO
SE
FIN
E S
PR
AY
The 7N series FogJet nozzleproduces a shower-like full conespray pattern of very fine droplets.
The nozzle assembly consists of a nozzle body and sevenremovable atomizing spray caps.Each cap has an internal corewhich is easily removed forcleaning or replacement.
The 7G series FogJet nozzleproduces a shower-like full conespray pattern. The 7G seriesnozzle provides large flow capac-ities with relatively small droplets.
The nozzle assembly consists ofa nozzle body and seven remov-able FullJet spray caps. Eachcap has an internal vane whichis easily removed and replaced.
InletNPT orBSPT
3/4
1
1oder1-1/2
1-1/2
1
7N
7G
NozzleType
CapacitySize
DIMENSIONS
*And Up
Nozzle No.Pipe
Conn.NPT orBSPT
ORDERING INFORMATION
DESIGN FEATURES
DIMENSIONS & WEIGHTS
7Natomizing spray caps1) NPT or BSPT (F)
7GFullJet spray caps
3⁄4)-11⁄2) NPT or BSPT (F)
LARGE CAPACITY/WIDE ANGLESMALL DROPLET SIZE/MULTIPLE ORIFICE/FULL CONE
Based on largest/heaviest version of each type.
STANDARDSPRAY NOZZLE
1-1/2 - 7G - SS 30Inlet
ConnectionPipe Size
NozzleType
MaterialCode
CapacitySize
SPRAY NOZZLES
Material Codes
no material code = Brass
SS = 303 Stainless Steel
316SS = 316 Stainless Steel
A C B
CAPACITY(gallons per minute)
20psi
40psi
60psi
80psi
100psi
125psi
150psi
AFeet
BFeet
CFeet
.60 3* 31⁄2 11⁄2 .11 .12 .141 3* 4 2 .12 .14 .16 .18 .21 .23
1.5 3* 41⁄2 21⁄2 .17 .21 .25 .28 .31 .342 3* 41⁄2 21⁄2 .23 .29 .33 .37 .41 .453 3* 51⁄2 31⁄2 .25 .35 .43 .50 .55 .62 .684 3* 51⁄2 31⁄2 .33 .47 .57 .66 .74 .83 .906 3* 6 4 .50 .70 .86 .98 1.1 1.2 1.48 3* 6 4 .66 .93 1.1 1.3 1.5 1.7 1.8
10 3* 7 41⁄2 .83 1.2 1.4 1.7 1.8 2.1 2.312 3* 8 41⁄2 1.0 1.4 1.7 2.0 2.2 2.5 2.714 3 8 41⁄2 1.2 1.6 2.0 2.3 2.6 2.9 3.2
16 3 8 5 1.3 1.9 2.3 2.6 3.0 3.3 3.67* 81⁄2 51⁄2
18 3 8 5 1.5 2.1 2.6 3.0 3.3 3.7 4.17* 9 6
22 3 91⁄2 51⁄2 1.8 2.6 3.2 3.6 4.1 4.5 5.07* 11 7
26 3 10 6 2.1 3.0 3.7 4.3 4.8 5.4 5.97* 12 8
3 5 31⁄41 5 61⁄2 41⁄4 .98 1.3 1.6 1.8 2.1 2.3 2.58 71⁄2 43⁄4
11 8 51⁄43 8 51⁄2
1.5 5 9 61⁄2 1.5 2.0 2.4 2.8 3.1 3.4 3.78 10 71⁄211 101⁄2 73⁄43 81⁄2 51⁄2
3 5 10 61⁄2 2.9 4.0 4.8 5.5 6.2 6.8 7.48 11 711 111⁄2 71⁄23 91⁄2 61⁄4
5 5 11 7 4.8 6.7 8.1 9.2 10.3 11.3 12.48 12 73⁄411 121⁄2 83 11 91⁄2
10 5 121⁄2 10 9.8 13.5 16.4 18.9 21.0 23 258 131⁄2 1111 14 123 12 10
12.5 5 131⁄4 11 12 17 20 23 25 28 308 14 1211 141⁄2 121⁄23 133⁄4 9
25 5 16 101⁄2 24 34 41 47 52 57 628 17 1111 171⁄2 111⁄23 133⁄4 9
30 5 16 101⁄2 29 40 48 55 62 68 748 17 1111 171⁄2 111⁄23 133⁄4 9
32 5 16 101⁄2 31 43 52 59 66 74 798 17 1111 171⁄2 111⁄23 133⁄4 9
40 5 16 101⁄2 39 53 64 74 83 92 1008 17 1111 171⁄2 111⁄23 14 91⁄2
45 5 161⁄2 11 44 60 72 82 91 100 1108 171⁄2 1211 18 121⁄23 141⁄2 101⁄2
50 5 17 12 48 67 81 92 103 113 1248 18 131⁄211 19 14
3/4-7G1 3⁄4 125⁄32 21⁄16 12 oz.thru 3/4-7G33/4-7G5 3⁄4 113⁄16 21⁄8 12 oz.1-7G10 1 23⁄16 211⁄16 11⁄2 lbs.thru 1-7G12.51-7G25 1 35⁄16 41⁄16 31⁄2 lbs.thru 1-7G401-1/2-7G25 11⁄2 3 4 33⁄4 lbs.thru 1-1/2-7G451-1/2-7G50 11⁄2 33⁄16 41⁄4 31⁄2 lbs.All 1-7N 1 23⁄32 21⁄2 11⁄2 lbs.
HInches
DInches
NetWeight
C55
GE
NE
RA
LP
UR
PO
SE
FIN
E S
PR
AY
Hydraulic Atomizing NOZZLESFINE ATOMIZING SPRAYS/HOLLOW CONE
Mtwo-piece design
1⁄4" NPT or BSPT (M)
LNintegral strainer
1⁄4" NPT or BSPT (F)
LN-Dintegral strainerwall-mounted
1⁄4" NPT or BSPT (F)
N-Wwide angle spray
1⁄4" NPT or BSPT (F)
LNN-Wintegral strainer/wide angle spray
1⁄4" NPT or BSPT (M)
N1⁄4" NPT or BSPT (F)
LN & LN-W
LNN & LNN-W
LND
LNND
N & N-W
NN & NN-W
M
Type LNFemaleConn.
Type LNNMaleConn.
1⁄4 LN.60 1⁄4 LNN.60 1⁄4 LND.60 1⁄4 LNND.60 1⁄4 N.60 1⁄4 NN.601⁄4 LN1 1⁄4 LNN1 1⁄4 LND1 1⁄4 LNND1 1⁄4 N1 1⁄4 NN1 1⁄4 M11⁄4 LN1.5 1⁄4 LNN1.5 1⁄4 LND1.5 1⁄4 LNND1.5 1⁄4 N1.5 1⁄4 NN1.5 1⁄4 M1.51⁄4 LN2 1⁄4 LNN2 1⁄4 LND2 1⁄4 LNND2 1⁄4 N2 1⁄4 NN2 1⁄4 M21⁄4 LN3 1⁄4 LNN3 1⁄4 LND3 1⁄4 LNND3 1⁄4 N3 1⁄4 NN3 1⁄4 M31⁄4 LN4 1⁄4 LNN4 1⁄4 LND4 1⁄4 LNND4 1⁄4 N4 1⁄4 NN4 1⁄4 M41⁄4 LN6 1⁄4 LNN6 1⁄4 LND6 1⁄4 LNND6 1⁄4 N6 1⁄4 NN6 1⁄4 M61⁄4 LN8 1⁄4 LNN8 1⁄4 LND8 1⁄4 LNND8 1⁄4 N8 1⁄4 NN8 1⁄4 M81⁄4 LN10 1⁄4 LNN10 1⁄4 LND10 1⁄4 LNND10 1⁄4 N10 1⁄4 NN10 1⁄4 M101⁄4 LN12 1⁄4 LNN12 1⁄4 LND12 1⁄4 LNND12 1⁄4 N12 1⁄4 NN12 1⁄4 M121⁄4 LN14 1⁄4 LNN14 1⁄4 LND14 1⁄4 LNND14 1⁄4 N14 1⁄4 NN14 1⁄4 M141⁄4 LN18 1⁄4 LNN18 1⁄4 LND18 1⁄4 LNND18 1⁄4 N18 1⁄4 NN18 1⁄4 M181⁄4 LN22 1⁄4 LNN22 1⁄4 LND22 1⁄4 LNND22 1⁄4 N22 1⁄4 NN22 1⁄4 M221⁄4 LN26 1⁄4 LNN26 1⁄4 LND26 1⁄4 LNND26 1⁄4 N26 1⁄4 NN26 1⁄4 M26
Type LNDFemaleConn.
Type LNNDMaleConn.
Type NFemaleConn.
Type NNMaleConn.
Type MMaleConn.
45°65°70°65°72°73°85°82°78°85°81°70°73°
35°62°70°75°70°81°79°89°84°82°88°84°72°74°
65°72°72°77°73°84°81°91°86°85°90°86°75°77°
CoreNo.
NOZZLE NO. SPRAY ANGLE
Material Codeno material code = BrassSS = 303 Stainless Steel316SS = 316 Stainless SteelPVC = Polyvinyl Chloride
Based on largest/heaviest version of each type.
ⓦ Evaporative cooling
ⓦ Moistening
ⓦ Humidifying
Fine spray atomizing nozzles usethe liquid pressure alone to pro-duce very finely atomized dropletsin a hollow cone spray patternwith uniform distribution, oftenachieving misting performance.
All parts are precision-machined.Orifice inserts, cores, andstrainers are easily removed forinspection or cleaning.
M series atomizing nozzlesfeature a !\›" NPT or BSPT (M)inlet connection and a remov-able core for easy cleaning orreplacement. ML series nozzlesare supplied with strainers.
N and NN series atomizingnozzles consist of a nozzle body,an orifice insert in a cap, and acore. LN and LNN series nozzlesare equipped with strainers.
LN-D and LNN-D series nozzlesoffer a !\›" NPT or BSPT (M)wall-mount design as well as abuilt-in strainer.
N-W and NN-W series nozzlesfeature the same construction as N series nozzles with an extrawide spray angle. LN-W andLNN-W series nozzles aresupplied with strainers.
Note: Core and orifice insertsare stainless steel.
ORDERING INFORMATION
DIMENSIONS & WEIGHTS
COMMON APPLICATIONS
DESIGN FEATURES
NOZZLE NO.TypeLN-WFemaleConn.
TypeLNN-WMaleConn.
TypeN-W
FemaleConn.
TypeNN-WMaleConn.
CoreNo.
SPRAY ANGLE
156°152°
165°157°155°
1⁄4 LN2W 1⁄4 LNN2W 1⁄4 N2W 1⁄4 NN2W1⁄4 LN3W 1⁄4 LNN3W 1⁄4 N3W 1⁄4 NN3W1⁄4 LN4W 1⁄4 LNN4W 1⁄4 N4W 1⁄4 NN4W1⁄4 LN8W 1⁄4 LNN8W 1⁄4 N8W 1⁄4 NN8W
Material Codeno material code = BrassSS = 303 Stainless Steel
Standard Materials
STANDARDSPRAY NOZZLE
1/4 LN - SS 8WNozzleType
CapacitySize
MaterialCode
InletConnectionPipe Size
Nozzle Body CapOverallHeight(Max.)
Standard MaterialsQ Q Q Q Q Q QQ Q Q Q Q Q QQ Q Q Q Q
Q Q
Q Q Q QQ Q Q Q
.016 206
.020 210
.020 216
.028 216
.028 220
.042 220
.042 225
.060 225
.064 420
.076 420
.076 421
.076 422
.076 625
.086 625
OrificeDiam.Nom.Inches
30psi
40psi
60psi
100psi
200psi
300psi
500psi
700psi
1000psi
1.31.72.63.55.26.98.6
10.412.115.619.1
23
1.01.52.03.04.06.08.0
10.012.014.018.0
2226
1.21.82.53.74.97.39.8
12.214.717.1
222732
.951.62.43.24.76.39.5
12.615.819.0
22293541
1.32.23.44.56.79.0
13.417.9
222731404958
1.62.74.15.58.2
11.016.5
22273338496071
2.13.55.37.1
10.614.2
2128354350647892
2.54.26.38.4
12.516.7
25344250597592
109
3.05.07.5
10.015.0
20304050607090
110130
40psi
80psi
300psi
CAPACITY (gallons per hour)
1QT\ŒÁ"
2Q\ˆ"
1U\ˆ"
2Q\´„"
1QT\ŒÁ"
1QE\´„"
WU\´„"
QE\ŒÁ" QQ\ŒÁ"hex. hex.QE\ŒÁ" QQ\ŒÁ"hex. hex.QE\ŒÁ" QQ\ŒÁ"dia. hex.QE\ŒÁ" QQ\ŒÁ"dia. hex.QQ\ŒÁ" QQ\ŒÁ"hex. hex.QQ\ŒÁ" QQ\ŒÁ"hex. hex.O\ŒÁ" —hex.
3Q\‰
3Q\‰
2E\‰
2E\‰
1Q\„
1Q\„
Q\„
OrificeDiam.Nom.Inches
CAPACITY(gallons per hour)
20psi
30psi
40psi
80psi
2.13.55.6
1.72.64.36.8
2.03.05.08.0
2.84.27.1
11.3
40psi
80psi
.039 210
.039 216
.060 220
.060 225
NetWeight
oz.
C56
GE
NE
RA
LP
UR
PO
SE
FIN
E S
PR
AY
LARGE CAPACITY/NARROW ANGLESMALL DROPLET SIZE/MULTIPLE ORIFICE/FULL CONE
ORDERING INFORMATION
DESIGN FEATURES PERFORMANCE DATA
Ftwo-piece with
hose thread adapter1"-111⁄2" /11⁄2" – 9 /11⁄2"-111⁄2"
Hose Thread (F)
FFone-piece
3⁄4" -11⁄4" NPT or BSPT (F)
SPRAY NOZZLES
The FF and F series FogJetnozzles throw a fogging spray ofsmall sized droplets. They pro-duce a dense full cone patternwith large flow rates.
FF series FogJets are one-piece solid bar stock nozzleswith a female pipe thread inletconnection.
F series FogJets are two-pieceassemblies with an adapterwhich provides a female hosethread connection.
STANDARDSPRAY NOZZLE
1 - 111⁄2 F - 18Hose
Thread(type Fonly)
CapacitySize
NozzleType
InletConnectionPipe Size
STANDARDSPRAY NOZZLE
3⁄4 FF - SS 4.8NozzleType
CapacitySize
MaterialCode
(type FFonly)
InletConnectionPipe Size
ⓦ 4.83/4 ⓦ 9ⓦ 12ⓦ 18
1 *111⁄2 ⓦ♦ 18
1 ⓦ 25ⓦ 35
1-1/4 ⓦ 50ⓦ 709 ⓦ** 35
*111⁄2 ⓦ** 351-1/2 9 ⓦ** 50
*111⁄2 ⓦ** 509 ⓦ** 70
*111⁄2 ⓦ** 70
DIMENSIONS AND WEIGHTS
OverallLength
Max.Diam.
NetWeight
HoseThread
NPT orBSPT
CONNECTION SIZE
Pitch of
HoseThread
NOZZLETYPE
F FF NPT(Hose) or BSPT
Capac-ity
size
StandardMaterials Material Code
no material code = BrassSS = 303 Stainless Steelno material code = Nickel-plated Brass for 1-11-1/2 F-18no material code = Nickel-plated Brass cap with Cast Iron plated body for 1-1/2-xx F-xx
Capac-ity
Size
Capac-ity
Size
*May also be used with corresponding tapered pipe thread connections.
H
A
C
B
D
♦**
3.46.48.5131318253550252535355050
4.89.012181825355070353550507070
5.911
14.7222231436186434361618686
6.812.7
17252535507199505071719999
7.614.2
192828405579
11055557979
110110
9.317.4
233535486897
13568689797
135135
CAPACITY(gallons per minute)
1" 1E\ˆ" 3 oz.
4O\´„" 1Q\„" 12 oz.1T\´„" 1WQ\´„" 5 oz.1T\´„" 1WQ\´„" 5 oz.
1U\´„" 2E\´„" 8 oz.
5QE\ŒÁ" 2Q\‰" 1E\‰ lbs.
20psi
40psi
60psi
80psi
100psi
150psi
SPRAY DIMENSIONS AND COVERAGES40 psi 100 psi
HeightAboveFloor
Ft.A
FeetB
FeetC
FeetA
FeetB
FeetC
Feet
4.8 3 17 7 13 25 5 209 3 23 8 17 31 5.5 24
12 3 25 8 18 33 5.5 2518 3 29 8 19 36 5.5 2625 3 32 8 24 42 5.5 3235 3 36 8 28 55 6 4550 3 37 8 28 60 6 5070 3 46 8 36 72 6 60
SPRAY COVERAGES “D” IN FEETAT VARIOUS PRESSURES
40psi
60psi
100psi
150psi
4.8, 3 2 2 2 29, 5 3 3 3 2Q\„
12 7 4 4 3Q\„ 310 5 4Q\„ 4 3Q\„
3 2 2 2 218, 5 3 3 3 2Q\„25 7 4 4 3Q\„ 3
10 5Q\„ 5 4Q\‰ 43 2Q\„ 2Q\„ 2Q\„ 235, 5 4 4 3Q\„ 350, 7 5 5 4Q\„ 470 10 6Q\„ 6 5Q\„ 5
HFeet
Air Atomizing NozzlesBasic Nozzle Installations and How to Order.... D2, D3Air Atomizing Nozzles1/8J & 1/4J (Basic Nozzle Parts & Assemblies)...... D4Air Atomizing Nozzle Body Assemblies1/8J & 1/4J - W/Strainer, Miniature, Back Connect,Extensions, Top Inlet, Steam Jacket, Thick Walls,Thin Walls, Screw Mount, Top Inlet, 20470Lube Gun, Swivel, Cluster Type, Twin Spray.......... D5Pressure Spray Set-Ups1/8J & 1/4J - Round Spray, Deflected FlatSpray, Wide Angle Round Spray,360° Circular Spray, Flat Spray.................. D6, D7, D8Siphon/Gravity-Fed Spray Set-Ups1/8J & 1/4J - Round Spray, Flat Spray.....................D9Pressure Spray Set-Ups (External Mix)1/8J & 1/4J - Flat Spray ....................................D10, 11Air Atomizing Nozzles1/8JJ (Basic Nozzle Parts & Assemblies)............... D12Pressure Spray Set-Ups1/8JJ - Round Spray, 360° Circular Spray,Wide-Angle Round Spray, Flat Spray............ D13, D14Siphon/Gravity-Fed Spray Set-Ups1/8JJ - Round Spray, Flat Spray............................. D15
Air Atomizing Nozzles1/2J (Basic Nozzle Parts & Assemblies)................ D16
Pressure Spray Set-Ups1/2J - Wide-Angle Round, Round & Flat Spray .... D17
Spray Set-Ups1/2J - Flat Spray (External Mix), 360° Circular Spray, Siphon Set-ups - Round Spray .................. D18
Air Atomizing Nozzles1J (Basic Nozzle Parts & Assemblies)................... D19
Pressure Spray Set-Ups1J - Wide-Angle Round, Round & Flat Spray........ D20
Spray Set-Ups1J - Flat Spray (External Mix),Siphon Set-up - Round Spray.................................D21
JAU Automatic Air ActuatedNozzles Assemblies.....................................D22, D23
Automatic Adjustable AutoJetNozzle Assembly...................................................D24
Automatic Air Actuated Nozzles Assemblies... D25
Humidification Nozzles.........................................D26
Humidification & Fluid LineAccessories................................................... D27-D28
Air AtomizingSpray nozzles
D
INDEX
section
SIPHON OR GRAVITY-FED LIQUID SET-UPSPRESSURE SET-UPS
LOW CAPACITYSERIES
LOW CAPACITYCOMPACT SERIES
MEDIUM CAPACITYSERIES
HIGH CAPACITYSERIES
Pages D27, D28
Air AtomizingNOZZLESD
2
AIR
AT
OM
IZIN
G
Pages D4-D21
AIR ATOMIZINGNOZZLES
Pages D22-D25
AUTOMATIC AIRATOMIZING NOZZLES
Page D26
HUMIDIFYINGNOZZLES
NOZZLEACCESSORIES
BASIC NOZZLE INSTALLATIONS
Pages D4 - D11 Pages D12 - D15 Pages D16 - D18 Pages D19 - D21
Q\ˆ" NPT or BSPT Q\‰" NPT or BSPT Q\ˆ" NPT or BSPT Q\„" NPT or BSPT 1" NPT or BSPT
1/8J 1/4J 1/8JJ 1/2J 1J
Each basic air atomizing nozzleseries is available with pressurespray set-up or siphon sprayset-up. Spray set-ups withineach series are interchangeable.They are available with internaland mix…in a wide variety ofspray patterns.
Spray Set-Up Spray Set-Up Spray Set-Up Spray Set-Up
The liquid is supplied to the nozzle underpressure. Air and liquid can be externally orinternally mixed to produce a completelyatomized spray.
The liquid is supplied by either a liquidsiphon or gravity feed. These set-ups aredesigned to draw liquid through the feed line into the air flow where it is atomized.
0.13 to 72 gph 0.13 to 25.7 gph 4.1 to 306 gph 24 to 1740 gph
AIR SHUT-OFFVALVE
AIR REGULATORAND GAUGE
1/4 JN AIRATOMIZING NOZZLE
AIRINLET
AIR FILTER
LIQUID REGULATORAND GAUGE
TWLIQUID STRAINER
LIQUID SHUT-OFFVALVE
LIQUIDINLET
AIR SHUT-OFFVALVE
AIR REGULATORAND GAUGE
1/4 JN AIRATOMIZING NOZZLE
AIRINLET
AIR FILTER
LIQUID CONTAINER
SIPHON TUBESIPHON HEIGHT
D3
AIR
AT
OM
IZIN
G
HOW TO ORDER MATERIAL CODE
For complete nozzle assembly…in any nozzle series
NOZZLE BODY ASB., RETAINER
& GASKET
1/4 JN - SS + SU11 - SS
SPRAY SET-UP
INLET CONN.PIPE SIZE
NOZZLE BODYASB. TYPE
MATERIAL CODE(BODY & RETAINER)
SPRAYSET-UP NO.
MATERIAL CODE(AIR & FLUID CAPS)
To order spray SET-UP ONLY specify: Spray Set-up No. SU11-SSTo order FLUID CAP ONLY specify: Fluid Cap No. 2050-SSTo order AIR CAP ONLY specify: Air Cap No. 67147-SSTo order spray NOZZLE WITHOUT SET-UP specify: 1/4 JN-SS Body Assembly
CHOICE OF SPRAY SET-UPS
INTERNAL MIX EXTERNAL MIX ATOMIZATIONCONTROL
no material code = Nickel-plated Brass
SS = 303 Stainless Steel
SSBR = Specifies Nickel-plated Brass Air Cap and303 Stainless SteelFluid Cap
316SS = 316 Stainless Steel
LUC‡ = Lucite
PVC‡ = Polyvinyl Chloride
‡Note: Not available for all spray set-ups listed,please confirm withSpraying Systems Co.
Each spray set-up provides aspecific spray pattern with aspecific capacity and spraycoverage range performance.Within each spray nozzle series,1/4J and 1/8J, 1/8JJ, 1/2J or 1J,all the spray set-ups are inter-changeable, thereby providingflexibility for different sprayperformances.
The liquid and gas are mixedinternally to produce a com-pletely atomized spray. Availablewith Round, Wide-Angle Round,360° Circular, Flat and DeflectedFlat Spray patterns.
The liquid atomization iscontrolled by varying the airpressure without changing flowrates. Effective for higherviscosity liquids and abrasivesuspensions.
Each spray set-up can beadjusted by air and liquidpressure changes to providefine drop size atomization orcoarse drop size atomiization.Basically, obtaining fineratomization is done by increasingthe air pressure and/or loweringthe liquid pressure, resulting in a high ratio of air flow rate toliquid flow rate.
Each spray set-up No. consistsof an Air Cap and Fluid Cap
Internal Mix(Pressure set-ups)
Round spray pattern
Internal Mix(Pressure set-ups)
Flat Spray
External Mix(Siphon set-ups)
Round spray pattern
External Mix(Pressure set-ups)
Flat Spray
AirCap
FluidCap
For explanation of numberingsystem for Air and Fluid Capssee Data Sheets 10616 and10616-1.
1 2 3 4 5 6
= + + + + + +
+
+
+
+
D4
AIR
AT
OM
IZIN
G
Air AtomizingNOZZLES
1/8J & 1/4J
Basic Nozzle Parts
Nozzle Assemblies
PRESSURE SPRAY SET-UPS:
Round Spray
Deflected Flat Spray
Wide Angle Round Spray
360° Circular Spray
Flat Spray
External Mix Flat Spray
SIPHON SPRAY SET-UPS:
Round Spray
Flat Spray
D4
D5
D6
D6
D7
D7
D8
D10, D11
D9
D9
1/8J
1/4J
For information on 9265-1/4J LUCITE Nozzles see Data Sheet 9265.For information on 1/4JR Hard Rubber Nozzles see Data Sheet 3564.
NOZZLESERIES
GENERAL INFORMATION PAGE
1. RETAINER RING – NO. 11582. AIR CAP3. FLUID CAP4. FLUID CAP GASKET– NO. 36125. NOZZLE BODY–NO. 11516. BACK SEAL GASKET – NO. 10439
MODEL 1/8JMODEL 1/4J
MODEL 1/8JNMODEL 1/4JN
MODEL 1/8JCOMODEL 1/4JCO
MODEL 11005-1/8JMODEL 11005-1/4J
PLUGNO. 1159
SHUT-OFF NEEDLEASSEMBLYNO. 12810
CLEAN-OUT NEEDLEASSEMBLYNO. 11829
SHUT-OFF/CLEAN-OUT NEEDLE ASSEMBLYNO. 11140
SPRAY SET-UP
Thin Wall Adapters add anadapter locknut and gasket tothe No. 3376 Thick WallAdapters to provide securemounting in thin walls. They areonly available for 1/8J and 1/4Jassemblies with a No. 6378locknut and No. 2804-3 gasket.
1/8J & 1/4J
Air AtomizingNOZZLE ASSEMBLIES D
5
AIR
AT
OM
IZIN
G
20470
W/STRAINER
MINIATURE
BACK CONNECT
EXTENSIONS
CLUSTER TYPE
SWIVELTOP INLET
STEAM JACKET
THICK WALLS
SCREW MOUNT
THIN WALLS
TOP INLET TWIN SPRAY
Data Sheets4922 &4922-1
Data Sheet 3378 Data Sheet 7545
Data Sheet 6552
Data Sheets 4921,6885 & 6185
Data Sheets 3378,7003 & 7323
Data Sheet6497
Data Sheets5356 & 6530
Data Sheet 17739Data Sheets 20470J, 20470JN,20470JMCO & 20470JN-1
Data Sheets4610 &6331
Data Sheet7690
Data Sheet8650
MODELS JAC and JACN featureair and liquid inlet connectionsentering the nozzle at 90° tospray projection axis. The JACNfeatures the addition of a shut-offneedle, as shown. Inlet connec-tions are available in !\°" (1/8JAC,1/8 JACN) and !\›" (1/4JAC, 1/4 JACN) NPT or BSPT (F).
MODEL1/4JF and 1/4JFN bothfeature built-in liquid strainers, butthe 1/4JFN has the addition of aliquid shut-off needle. Both areavailable with !\›" NPT or BSPT(F) air inlet and !\°" NPT or BSPT(F) liquid inlet pipe connections.
MODEL 6552-1/8JAC miniatureassembly body is only !\¤" (1.3 cm)thick with a 1%\‹¤" (2.9 cm) by 1!\›"(3.2 cm) rectangular face. Thetip of the nozzle projects from theface a maximum of 1#\⁄fl" (3 cm)depending upon the Spray Set-up used. Air and liquid inletsare !\°" NPT or BSPT (F) pipeconnections.
The MODEL 1/4JBCJ and the1/2JBCJ feature a steam jacketaround the nozzle body forspraying liquids that are tooviscous to spray at room temper-ature. The 1/2JBCJ has #\°" NPTor BSPT (F) pipe connections forthe steam inlet and outlet, and!\¤" NPT or BSPT (F) pipe connec-tions for the air and liquid inlets.All inlets and outlets on the1/4JBCJ are !\›" NPT or BSPT (F)pipe connections.
MODELS 1/4JDLN and 1/4JDL-CO feature a screw mount with(\‹¤" (7 mm) diameter mountingholes. Standard !\›" (6 mm)screws hold the body to the wallwith a gasket providing the seal.Air and liquid inlets are !\›" NPTor BSPT (F) pipe connections.The 1/4JDLN features a shut-offneedle and the 1/4JDL-COfeatures a clean-out needle.
The MODEL 8650 Multiple SprayAssembly features five SpraySet-ups located on the faces ofthe assembly (as shown) or fourset-ups located on the side faces.The assembly is supplied with!\›" NPT or BSPT (F) air andliquid inlet connections.
The MODEL 2J is a dual sprayassembly with opposing SpraySet-ups perpendicular to oppos-ing air and liquid inlets. Availablewith !\›" (1/4-2J) or !\¤" (1/2-2J)NPT or BSPT (F) inlet pipeconnections.
The 20470 Series hand held airatomizing spray guns featurelightweight aluminum construction
and a comfortable, easy to oper-ate, design. Extensions are avail-able in up to 36" (91 cm) lengths.
The MODEL 1/8-2JAC DualSpray Assembly features twoopposing Spray Set-ups with theair and liquid inlet connectionsperpendicular to the spray axis.The assembly has !\°" NPT orBSPT (F) inlet pipe connections.
The MODEL JBC features thecenter lines of the air and liquidinlet entering in the back of thenozzle and parallel to the sprayprojection axis. Inlet connectionsare available in !\°" (1/8JBC), !\›"(1/4JBC), and !\¤" (1/2JBC) NPTor BSPT (F) inlet pipe connections.
The MODEL 17310-1/8JJfeatures a Spray Set-up extensionattached to the nozzle assembly.Extensions are available in 3", 6",9". 12", and 18" lengths (8 cm, 15cm, 23 cm, 30 cm, 46 cm lengths).
Thick Wall Adapters replaceRetainer Rings on nozzle assem-blies and fit into threaded wallopenings, holding the nozzlesecurely in place. They are avail-able for 1/8J and 1/4J (No. 3376with #\›" NPT or BSPT (M) conn.),1/2J (No. 4886 with 1!\›" NPT orBSPT (M) conn.) and 1J (No.7508 with 1!\¤" NPT or BSPT (M)conn.) nozzle assemblies,including those with shut-off andclean-out attachments.
The MODEL 7545 Multiple SwivelSpray Assembly features eachSpray Set-up mounted on its ownswivel body. One or two bodiesmay be used and each can berotated 360° to the desired posi-tion. The swivel bodies are lockedin place by a stainless steel lock-screw that runs vertical throughthe assembly. This unusuallycompact spray assembly is avail-able with !\°" NPT or BSPT (F) airand liquid pipe connections.
1/8J & 1/4J
D6
AIR
AT
OM
IZIN
G
ROUND SPRAY AND DEFLECTEDFLAT SPRAY AIR CAPSAir Caps used in these spray set-upsproduce a narrow full cone round sprayand deflected flat spray patterns.
Note: The No. 1158 Retainer Ring and3612 Gasket must be ordered separately from the spray set-up,but are included in the standardnozzle assembly. SEE PAGE D3FOR ORDERING INFORMATION.
Air AtomizingPRESSURE SPRAY SET-UPS
ROUND SPRAY
SpraySet-up
No.
SU11
SU12A
SU12
SU22B
SU22
SU42
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap2050
+Air Cap67147
Fluid Cap2050
+Air Cap73160
Fluid Cap2850
+Air Cap73160
Fluid Cap40100
+Air Cap
1401110
Fluid Cap60100
+Air Cap
1401110
Fluid Cap100150
+Air Cap
1891125
SPRAY DIMENSIONS
SpraySet-up
No.
SU240E
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap28150
+Air Cap
189110-75°
DEFLECTED FLAT SPRAY
For the Round Spray pattern,angle “A” is maintained through-out distance “B”. Beyond “B”, thespray becomes turbulent and willproject out to distance “D”.
When using a Pressure-FedLiquid System, the liquid issupplied to the nozzle underpressure. The liquid and com-pressed air or gas are mixedinternally to produce a completelyatomized spray.
DeflectedFlat Spray
DESIGN FEATURES Air CapFluid Cap
3612 Gasket
1158 Retainer Ring
Spray Pattern
ROUNDSPRAYPATTERN
101214
101214
121620222426281620222426283012141618
1416
.66
.48
.36
.66
.54
.42
1.261.08.90.81.78.77.76
3.442.351.901.541.23.96.728.16.64.93.4
11.78.5
.55
.67
.78
.66
.77
.90
.73
.941.151.251.361.431.562.683.203.463.703.974.224.482.002.322.663.00
3.053.60
141822242628301820222426
2226303438404228323640444850202224262830322022242628
1.501.23.99.86.72.60.45
1.441.321.201.08.90
2.161.741.441.261.081.02.94
5.033.702.641.851.30.90.76
13.612.010.28.67.25.94.6
27.523.018.014.411.3
.40
.50
.63
.70
.76
.82
.93
.87
.981.061.161.26
1.051.261.471.671.871.962.043.714.174.655.135.636.106.362.552.853.153.453.754.054.353.043.493.954.404.85
242832363840422428323436384030343842465052404448556065703034384042444628303234363840
1.681.441.08.84.72.66.54
1.981.681.441.321.201.111.022.902.462.101.741.501.241.206.105.033.952.301.561.08.73
16.313.19.98.77.66.65.6
36.632.628.724.820.917.514.6
.56
.63
.82
.961.031.111.191.001.171.351.461.571.661.761.241.421.651.872.032.252.364.725.175.656.507.127.758.353.253.754.324.614.905.205.503.553.964.364.785.205.606.03
323640444850523034384244464836404448525660485565758085903842465052545632364044464850
1.861.621.321.08.85.72.66
2.402.161.921.621.501.381.324.323.853.552.802.462.161.867.755.953.551.951.401.00.72
19.516.513.610.89.68.67.6
49.442.235.128.024.521.318.4
.68
.80
.931.071.231.331.381.141.291.471.681.781.881.981.261.361.561.782.012.202.365.306.077.288.509.109.7010.33.744.204.715.305.585.856.143.314.104.905.666.056.456.86
505458626668704046525862667048525660646870657580859095
1005460657075808542465054586570
2.282.051.801.561.321.231.113.302.942.582.282.101.861.685.825.284.924.564.083.723.6010.78.677.656.655.644.633.6225.721.818.515.212.210.08.0
70.665.059.053.247.437.830.0
.981.071.191.361.521.581.661.361.541.832.092.262.462.671.501.651.731.882.082.252.346.747.738.258.809.4010.010.64.665.345.986.687.808.148.903.173.854.635.406.167.548.55
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
Airpsi
Liquidpsi
SprayAngle
ADeg.
Bin.
Dfeet
1224364462
1220344258
2234424860
2440557585
1426405070
1424344454
1020304060
1020304060
1020304060
1020304060
1020304060
1020304060
13°13°13°14°15°
12°13°13°13°15°
12°13°13°14°15°
18°20°20°21°21°
17°18°20°20°21°
19°20°21°21°22°
12"13"14"
15Q\„"17Q\„"
17"18"19"20"22"
19"20"21"22"
23Q\„"
26"30"32"36"38"
24"27"30"31"36"
35"39"41"42"46"
9'10'11'
12Q\„'14Q\„'
12'13'14'15'17'
13'14'15'16'
17Q\„'
16'20'22'26'30'
16'19'22'23'28'
20'23'25'26'30'
10 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)
20 psi 30 psi 40 psi 60 psi
68
1012
2.92.52.01.5
1.61.92.32.7
1416182022
3.93.53.12.82.3
2.62.83.13.53.8
2224263034
4.74.34.03.32.3
3.33.63.84.55.2
2632384446
5.84.83.82.82.3
3.64.45.36.26.6
3846546270
7.46.45.34.22.8
4.65.56.67.89.4
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
10 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)
20 psi 30 psi 40 psi 60 psi
15"9"
6"
1/8J & 1/4J
D7
AIR
AT
OM
IZIN
G
DESIGN FEATURESFor the Wide-Angle RoundSpray, dimensions “A”, “B”, and“C” are the pattern widths atdistances from the nozzle asshown. The total distance ofspray projection from the nozzleto the maximum dispersal pointis represented by “D”.
PRESSURE SPRAY SET-UPSLiquid is supplied to nozzle underpressure. Liquid and compressedair or gas are mixed internally toproduce a finely atomized spray.
WIDE-ANGLE ROUND SPRAY AND 360° CIRCULAR SPRAY AIR CAPSAir Caps used in these Spray Set-upsproduce a hollow cone type, wide-angle round spray and 360° circularspray patterns.
WIDE-ANGLEROUNDSPRAY PATTERN
Note: The No. 1158 Retainer Ring and3612 Gasket must be ordered separately from the Spray Set-up,but are included in the standardnozzle assembly. SEE PAGE D3FOR ORDERING INFORMATION.
Air AtomizingPRESSURE SPRAY SET-UPS
WIDE-ANGLE ROUND SPRAY
SpraySet-up
No.
SU16
SU26B
SU26
SU29
SU30
SU46
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap2050
+Air Cap
67-6-20-70°
Fluid Cap40100
+Air Cap
140-6-37-70°
Fluid Cap60100
+Air Cap
140-6-37-70°
Fluid Cap60100
+Air Cap
140-6-52-70°
Fluid Cap40100
+Air Cap
120-6-35-60°
Fluid Cap100150
+Air Cap
189-6-62-70°
SPRAY DIMENSIONS
SpraySet-up
No.
SU340C
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap60150
+Air Cap
189-6-62-160HC
360° CIRCULAR SPRAYSpray
Pattern
360°Circular Spray
Air CapFluid Cap
3612 Gasket
1158 Retainer Ring
8101214
1214
101214
18222628303234161820222426282426283032
1.411.14.79.45
1.85.55
6.33.62.0
9.47.76.05.24.43.73.0
3.242.612.081.621.301.04.826.75.24.03.02.0
.36
.43
.50
.60
1.782.20
1.141.542.00
3.03.6
4.134.44.75.0
5.251.431.591.751.902.062.202.355.55.96.36.87.2
14161820222426222426
20222426
303438424650602832364042444638424446485052
2.101.901.681.441.17.91.55
3.302.201.20
9.06.95.13.3
13.411.910.38.97.35.82.4
4.603.372.451.751.451.211.0
10.77.66.25.04.03.02.4
.42
.50
.56
.64
.71
.80
.902.302.673.05
1.602.002.402.80
4.154.655.15.66.1
6.657.951.962.272.552.853.003.143.287.48.38.79.19.59.9
10.3
22263034363840303234363840
303234363840
444855657075804246485055606548525660626570
2.362.021.611.15.91.68.43
5.104.253.352.501.60.70
11.29.37.45.43.62.3
15.313.811.37.86.14.53.3
5.274.0
3.453.032.111.471.0316.512.59.26.65.64.42.6
.56
.69
.831.001.071.161.252.542.853.183.503.854.30
2.042.442.803.203.603.98
5.455.9
6.758.08.6
9.259.852.672.963.113.263.633.984.368.89.6
10.411.311.712.313.3
303438424648503842444648505240424446485052607080859095
1005560657075808560657075808590
2.532.231.901.501.10.90.69
6.404.703.903.062.251.40.60
12.410.68.87.15.43.62.2
15.612.59.37.86.24.83.7
5.694.243.152.311.721.321.0518.613.710.07.45.54.02.5
.68
.81
.941.1
1.261.351.452.843.423.724.054.424.845.342.542.923.333.724.144.514.917.058.259.45
10.0510.711.311.93.303.684.064.444.825.205.5810.411.412.413.514.515.516.6
44485560657075545658606570755658606570758080859095
100
80859095
100
859095
100
2.952.722.301.921.501.07.65
8.768.107.446.765.103.501.8516.214.813.89.86.54.02.4
21.419.517.916.515.1
7.105.804.653.753.00
29.224.620.717.5
.81
.941.201.401.601.802.053.443.744.034.325.106.006.952.753.113.504.425.366.316.518.559.159.75
10.3510.95
4.504.885.275.656.03
13.714.715.816.9
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm Air
psiLiquidpsi
Ain.
Bin.
Cin.
Dfeet
1020344260
1224344660
1222344665
2842658590
2240507090
2846607590
1020304060
1020304060
1020304060
1020304060
1020304060
1020304060
5Q\„"6"
6Q\„"6Q\„"7Q\„"
7"7Q\„"7Q\„"8"
8Q\„"
7Q\„"8"8"8"8"
8"8"
8Q\„"9"
9Q\„"
6"6Q\„"6Q\„"7"
7Q\„"
9Q\„"10"11"
11Q\„"13"
7"7Q\„"8"8"9"
9Q\„"10"10"
10Q\„"11"
10"10Q\„"10Q\„"11"11"
10"10Q\„"11"
11Q\„"12Q\„"
7Q\„"8"8"
8Q\„"9Q\„"
13"13Q\„"14Q\„"15"
16Q\„"
9"9Q\„"10"
10Q\„"12"
12Q\„"13"13"
13Q\„"14Q\„"
14"14Q\„"14Q\„"15"
15Q\„"
13"13Q\„"14Q\„"15"16"
9"9Q\„"9Q\„"10"11"
18"18Q\„"20"21"23"
5'6'7'9'13'
6'8'
10Q\„'13Q\„'19Q\„'
7'10Q\„'13Q\„'16Q\„'22Q\„'
18'21'27'30'34'
9'15'18'24'31'
18'21'24'26'32'
10 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)
20 psi 30 psi 40 psi 60 psi
2022242628
4.02.82.01.51.1
2.452.7
2.973.3
3.62
3438424648
6.64.42.81.71.3
4.094.85.5
6.346.85
5052566070
7.16.24.43.21.3
6.386.757.558.41
11.75
6065708090
11.08.36.13.11.4
7.68.639.78
12.4415.4
859095
100
14.412.09.87.8
11.813.014.115.4
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
10 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)20 psi 30 psi 40 psi 60 psi
1/8J & 1/4J
D8
AIR
AT
OM
IZIN
G
FLAT SPRAY AIR CAPSAir Caps used in these spray set-upsproduce a flat spray pattern.
Note: The No. 1158 Retainer Ring and3612 Gasket must be ordered separately from the Spray Set-up,but are included in the standardnozzle assembly. SEE PAGE D3FOR ORDERING INFORMATION.
Air AtomizingPRESSURE SPRAY SET-UPS
For the Flat Spray pattern, dimen-sions “A”, “B”, and “C” are thepattern widths at distances fromthe nozzle as shown. The totaldistance of spray projection fromthe nozzle to the maximum disper-sal point is represented by “D”.
When using a Pressure-FedLiquid System, the liquid issupplied to the nozzle underpressure. The liquid and com-pressed air or gas are mixedinternally to produce a completelyatomized spray.
FLAT SPRAY
SpraySet-up
No.
SU13A
SU13
SUN13
SU14
SUN23
SU23B
SU23
SU43
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap2050
+Air Cap73328
Fluid Cap2850
+Air Cap73328
Fluid Cap2850
+Air Cap73335
Fluid Cap2850
+Air Cap73320
Fluid Cap60100
+Air Cap125340
Fluid Cap40100
+Air Cap125328
Fluid Cap60100
+Air Cap125328
Fluid Cap100150
+Air Cap189351
SPRAY DIMENSIONS
DESIGN FEATURESAir Cap
Fluid Cap
3612 Gasket
1158 Retainer Ring
FLAT SPRAY PATTERN
101214161820221214161820
14161820242832182022242628
14161820
1618202224
121416182022
1416
1.441.251.09.93.79.65.53
2.171.801.451.08.77
2.42.11.71.4.81.54.30
1.04.80.62.47.35.25
4.52.92.0.84
2.952.251.721.321.00
7.05.44.23.32.72.0
7.75.0
.84
.961.081.201.321.431.55.70.82.95
1.071.2
.891.051.141.261.541.761.961.051.151.251.351.451.55
.80
.971.171.42
1.922.102.302.502.70
1.151.351.571.691.972.20
3.173.83
18222630343840202428303234362226303438424830343638404244242628303234362830323436
222630323436382628
2.171.821.501.20.93.68.57
3.352.712.061.761.441.18.943.22.82.11.51.2.72.39
1.561.10.90.74.60.47.357.56.04.53.42.41.3.80
4.453.873.302.782.28
11.58.36.05.14.33.63.0
10.57.0
1.121.311.501.681.872.072.16.96
1.141.341.451.561.671.781.131.381.621.872.1
2.382.691.431.611.701.791.881.972.071.241.441.681.822.062.322.612.662.843.043.223.40
1.652.022.402.602.782.973.164.555.15
283236404448553034384246485034384246506070424446485055
34363840424650384042444648
343842464850523436384042
2.492.191.891.581.301.03.65
3.983.412.852.291.721.431.23.42.92.31.81.4.60.33
2.061.801.571.351.13.70
9.57.86.55.24.12.61.1
5.945.404.864.323.783.25
12.49.87.85.95.04.33.7
20.816.612.89.56.7
1.471.641.822.002.182.362.681.271.451.641.852.072.182.281.631.862.072.362.583.163.651.751.851.942.042.132.36
1.741.962.2
2.532.653.253.723.223.403.553.743.934.12
2.202.572.953.343.523.713.904.755.255.8
6.356.85
38424650606570384246506065704044485460708555606570
44464852566065465052545658604650545660657042444648505254
2.772.492.201.931.25.93.65
4.664.143.6
3.081.761.2.764.43.83.32.61.91.1.40
2.161.601.15.76
11.19.78.45.73.92.41.1
7.506.455.905.404.874.343.8413.710.98.77.86.44.63.3
29.425.120.816.713.110.07.3
1.842.012.192.372.813.023.251.491.651.852.052.582.843.091.771.992.222.552.983.534.272.152.382.622.85
2.22.462.693.3
3.844.365.043.663.974.154.324.504.704.902.753.143.513.704.064.535.005.155.6
6.056.6
7.157.758.3
556575859095
10065707580859095606570758090
10075808590
56606570809095657075808590
657580859095
100586065707580
3.412.832.261.691.401.13.884.8
4.213.633.052.481.981.575.04.43.93.43.02.32.0
3.202.662.191.75
19.816.713.59.74.81.8.70
9.708.607.506.405.304.25
18.312.610.68.76.95.54.5
44.741.031.422.515.08.7
2.432.853.263.673.884.094.292.382.622.863.103.353.603.852.532.733.003.253.574.124.652.662.903.133.36
2.562.973.5
4.335.737.4
8.384.805.205.606.006.486.96
3.564.474.955.405.856.306.766.056.427.458.7510.1
11.45
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm Air
psiLiquid
psiAin.
Bin.
Cin.
Dfeet
1630405085
1630425080
2034465475
2238466080
1630405270
2032425475
1632465685
1426384870
1020304060
1020304060
1020304060
1020304060
1020304060
1020304060
1020304060
1020304060
10"14"15"
18Q\„"22"
14"17"20"23"23"
4"5"5"6"8"
10"14"23"24"25"
4"4"5"6"8"
6"9"
10"12"13"
7"9"
10"12"13"
7"10"10"13"14"
14"19"21"24"29"
18"24"26"30"30"
5"6"7"9"
10"
13"20"29"29"30"
5"5"7"8"
10"
7"11"13"15"16"
9"12"13"15"16"
8"12"12"16"17"
18"26"30"34"37"
28"32"35"38"38"
7"8"9"
11"13"
18"27"36"37"38"
6"7"9"
11"14"
8"13"18"18"19"
12"16"17"19"20"
10"17"18"21"23"
8Q\„'10'
10Q\„'11'13'
7'8'
8Q\„'9'
10Q\„'
10'12'13'14'16'
6'6Q\„'6Q\„'
7'7Q\„'
8'10'11'12'13'
10'10Q\„'
11'11Q\„'
13'
11'11Q\„'
12'12Q\„'14Q\„'
11'12Q\„'
14'15'17'
10 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)
20 psi 30 psi 40 psi 60 psi
15"9"
6"
SU5
10203020304060203040
203040
8"8Q\„"9"
9"9Q\„"10Q\„"11"
7Q\„"8"
8Q\„"
6Q\„"7"8"
10Q\„"11Q\„"12"
12Q\„"13Q\„"14Q\„"15Q\„"
9"10"
10Q\„"
8Q\„"9"
10Q\„"
15"15"15"
15"16Q\„"18"19"
10Q\„"11"12"
10Q\„"11Q\„"13"
7'7'6'
9'9'10'9'
11'11'10'
11'11'11'
1/8J & 1/4J
D9
AIR
AT
OM
IZIN
G
DESIGN FEATURES
ROUND SPRAY AND FLAT SPRAY AIR CAPSAir Caps used in these Spray Set-upsproduce round spray and flat spray patterns.
Note: The No. 1158 Retainer Ring and3612 Gasket must be ordered separately from the Spray Set-up,but are included in the standardnozzle assembly. SEE PAGE D3FOR ORDERING INFORMATION.
Air AtomizingSIPHON/GRAVITY-FED SPRAY SET-UPS
For the Round and Flat Sprays,angle “A” is maintained through-out distance “B”. Beyond “B”, thespray becomes turbulent and willproject out to distance “D”.
When using a Siphon or Gravity-Fed Liquid System, the liquid issupplied by either a liquid siphonor gravity feed. These Set-upsare designed to draw liquidthrough the feed line into the airflow where it is atomized.
ROUND SPRAY
SU1A
SU1
SU2A
SU2
SU4
ATOMIZING AIR
Gravity Head Siphon Height
FLAT SPRAY
SpraySet-up
No.
SUF1
SUF2C
SUF3B
SUF4B
Spray Set-upConsists of Fluid andAir Cap
Combination
ATOMIZING AIR
Gravity Head Siphon Height
Air Cap
Fluid Cap
3612Gasket
1158 Retainer Ring
ROUNDSPRAY PATTERN
Fluid Cap 1650+
Air Cap 64
Fluid Cap 2050+
Air Cap 70
Fluid Cap 60100+
Air Cap 120
Fluid Cap 2850+
Air Cap 73420
Fluid Cap 40100+
Air Cap 122435
SpraySet-up
No.
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap 2050+
Air Cap 64
Fluid Cap 2850+
Air Cap 70
Fluid Cap 100150+
Air Cap 180
Fluid Cap 35100+
Air Cap 120432
Fluid Cap 40100+
Air Cap 122440
102040601020406010204060102040602040608030406080
.40
.59
.951.32.47.66
1.061.48.81
1.201.942.70.68
1.031.702.391.903.004.105.205.36.58.8
11.1
.39
.46
.54
.59
.63
.73
.87
.98
.67
.76
.89
.981.191.371.571.485.806.506.806.80
11.6
.35
.43
.50
.54
.55
.66
.81
.92
.61
.72
.86
.961.051.271.471.415.155.956.356.40
11.411.0
.30
.39
.47
.49
.46
.60
.76
.88
.53
.64
.82
.94
.911.131.321.304.205.105.605.80
10.610.3
.23
.34
.41
.44
.40
.54
.71
.83
.43
.56
.76
.91
.56
.881.151.083.104.304.905.207.27.88.38.3
.18
.31
.38
.41
.32
.48
.67
.79
.37
.50
.71
.87
.47
.771.051.022.653.704.204.506.06.87.47.5
.14
.28
.36
.39
.21
.40
.61
.73
.29
.44
.65
.81
.38
.68
.91
.901.903.003.453.854.65.36.26.4
.14
.28
.31
.21
.43
.57
.21
.46
.68
.46
.63
.74
.601.552.202.60
3.24.4
.19
.24
.07
.28
.40
.30
.56
.28
.52
.701.301.60
2.2
AirPress.
psi
AirCapacity
scfm 18" 12" 6" 4" 8" 12" 24" 36"
Airpsi
SprayAngle
Adegrees
Binches
Dfeet
102040601020406010204060102040602040608030406080
18°18°18°18°18°18°18°19°18°18°19°20°21°21°21°22°17°18°18°19°20°20°21°22°
11"11"12"14"
12"13"15"17"
12"13"15"17"
15"16"18"20"
18"20"21"23"
20"21"23"25"
6'6Q\„'7Q\„'8Q\„'
7'7Q\„'8Q\„'10'
8'9'11'13'
10'11'13'15'
12'14'16'18'
22'23'25'27'
LIQUID CAPACITY in gph (gallons per hour) SPRAY DIMENSIONSAt 8" Siphon Height
102030203040602030405020304050
.991.421.831.862.422.964.052.262.883.524.132.102.703.283.87
.35
.31
.181.01.88.76.44
1.351.26.98.58
2.012.001.821.10
.33
.30
.16
.95
.84
.73
.411.281.21.92.52
1.901.941.74.97
.30
.29
.15
.90
.81
.69
.371.201.14.87.44
1.711.811.63.85
.27
.26
.11
.77
.75
.65
.331.01.92.66
1.471.581.42.69
.25
.25
.09
.72
.71
.61
.30
.96
.87
.59
1.401.521.34
.22
.23
.67
.67
.58
.27
.92
.82
.52
1.321.451.22
.17
.19
.62
.63
.53
.78
.74
.44
1.171.341.03
.13
.16
.56
.57
.48
.62
.59
.921.11
AirPress.
psi
AirCapacity
scfm 18" 12" 6" 4" 8" 12" 24" 36"
Airpsi
Ain.
Bin.
Cin.
Dfeet
LIQUID CAPACITY in gph (gallons per hour) SPRAY DIMENSIONSAt 8" Siphon Height
SIPHONHEIGHT
HEAD
AIR
AIR
SPRAY DIMENSIONS
1/8J & 1/4J
Air AtomizingPRESSURE SPRAY SET-UPS(EXTERNAL MIX)
D10
AIR
AT
OM
IZIN
G
DESIGN FEATURES
EXTERNAL MIX AIR CAPSExternal Mix Air Caps used in these sprayset-ups produce a flat spray.
Note: The No. 1158 Retainer Ring and3612 Gasket must be ordered separately from the Spray Set-up,but are included in the standardnozzle assembly. SEE PAGE D3FOR ORDERING INFORMATION.
FLAT SPRAY (External Mix)
SpraySet-up
No.
SUE15B
SUE18B
SUE15A
SUE18A
SUE15
SUE18
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap1650
+Air Cap
67228-45°
Fluid Cap1650
+Air Cap
62240-60°
Fluid Cap2050
+Air Cap
67228-45°
Fluid Cap2050
+Air Cap
62240-60°
Fluid Cap2850
+Air Cap
67228-45°
Fluid Cap2850
+Air Cap
62240-60°
Atomization can be controlled byvarying the air pressure withoutchanging liquid flow rates withExternal Mix Set-Ups. For theFlat Spray, dimensions “A”, “B”,and “C” are the pattern widths atdistances from the nozzle asshown. The total distance ofspray projection from the nozzleto the maximum dispersal pointis represented by “D”.
When using a Pressure-FedLiquid System, the liquid issupplied to the nozzle underpressure. The liquid and com-pressed air or gas are mixedexternally to produce a completelyatomized spray.
Air Cap
Fluid Cap
3612 Gasket
1158 Retainer Ring
FLAT SPRAY PATTERN
35
1015202530
56
78
5101520253040
58
1015
10152025304050
67
810
.89
.931.11.41.61.92.1
.78
.88
.971.0
.931.11.41.61.92.12.6
.781.0
1.21.6
1.11.41.61.92.12.63.0
.88
.97
1.01.2
.80
.80
1.2
1.2
2.3
2.3
5101520253040
56
810
10152025304050
510
1520
15202530405060
68
910
.931.11.41.61.92.12.6
.78
.88
1.01.2
1.11.41.61.92.12.63.0
.781.2
1.61.9
1.41.61.92.12.63.03.6
.881.0
1.11.2
1.0
1.0
1.6
1.6
3.0
3.0
10152025304050
68
1012
15202530405060
810
2030
20253040506070
68
1012
1.11.41.61.92.12.63.0
.881.0
1.21.4
1.41.61.92.12.63.03.6
1.01.2
1.92.5
1.61.92.12.63.03.64.2
.881.0
1.21.4
1.4
1.4
2.2
2.2
4.2
4.2
20253040506080
810
1520
25304050607090
1020
3035
35405060708090
1012
1520
1.61.92.12.63.03.64.9
1.01.2
1.61.9
1.92.12.63.03.64.25.6
1.21.9
2.52.8
2.42.63.03.64.24.95.6
1.21.4
1.61.9
2.0
2.0
3.1
3.1
6.0
6.0
40506070758090
1015
2535
45506070759095
1520
3035
506070758090
100
2025
3035
2.63.03.64.24.54.95.6
1.21.6
2.22.8
2.93.03.64.24.55.65.8
1.61.9
2.52.8
3.03.64.24.54.95.66.2
1.92.2
2.52.8
2.8
2.8
4.4
4.4
8.4
8.4
AirPress.
psiscfm gph
AirPress.
psiscfm gph
AirPress.
psiscfm gph
AirPress.
psiscfm gph
AirPress.
psiscfm gph Air
psiLiquid
psiAin.
Bin.
Cin.
Dfeet
31520202540706881520152052025253050751015102035252510253035406075881015202530
335201020405102020203040335201020405102020203040335201020405102020203040
3Q\„"3Q\„"4"
4Q\„"4Q\„"5"6"
8"9"11"11"10"11"12"
3"3Q\„"4"5"5"5"6"
11"12"15"14"13"15"16"
5"5"5"
5Q\„"5Q\„"5Q\„"6Q\„"
14"14"15"16"17"16"16"
6"6"6"7"6"7"7"
11"12"14"13"12"14"15"
5Q\„"6"
6Q\„"7Q\„"7"
8Q\„"7Q\„"
13"15"18"17"16"18"19"
6Q\„"6Q\„"7"8"
7Q\„"8"8"
19"19"19"20"21"20"20"
9"9"9"10"9Q\„"11"9Q\„"
13"16"18"17"16"19"20"
8Q\„"8Q\„"9"
11Q\„"10"12"10"
16"19"23"22"20"23"26"
10"10"9Q\„"12Q\„"12"14"12"
24"25"25"26"26"27"27"
3'4'4'5'5'6'8'
4'6'6'8'9'
8Q\„'9'
3Q\„'5Q\„'6'7'6'8'10'
5'7'6'8'10'9'
9Q\„'
4'6'6'6'
7Q\„'10'13'
6'5'6'7'8'9'
9Q\„'
3 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)
5 psi 10 psi 20 psi 40 psi
15"9"
6"
1/8J & 1/4J
D11
AIR
AT
OM
IZIN
G
FLAT SPRAY (External Mix) —continued
SpraySet-up
No.
SUE25B
SUE28B
SUE25A
SUE28A
SUE28
SUE25
SUE45B
SUE45A
SUE45
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap35100
+Air Cap
134255-45°
Fluid Cap35100
+Air Cap
122281-60°
Fluid Cap40100
+Air Cap
134255-45°
Fluid Cap40100
+Air Cap
122281-60°
Fluid Cap60100
+Air Cap
122281-60°
Fluid Cap60100
+Air Cap
134255-45°
Fluid Cap60150
+Air Cap
200278-45°
Fluid Cap80150
+Air Cap
200278-45°
Fluid Cap100150
+Air Cap
200278-45°
SPRAY DIMENSIONS
10152025304050
810
1520
10152025304050
815
2025
1015
2025
15202530354050253035404550603035404550607040455055606570
3.03.64.14.95.56.98.0
3.23.6
4.65.5
3.03.64.14.95.56.98.0
3.24.6
5.56.5
3.64.6
5.56.5
3.64.14.95.56.36.98.08.39.2
10.511.612.513.415.79.2
10.511.612.513.415.718.411.612.513.414.515.717.018.4
3.6
3.6
4.8
4.8
9.9
9.9
10.0
17.4
27.9
15202530405060
1015
2530
20253035405060
1020
2530
1520
3035
25303540455060253035404550604045505560708050556065707580
3.64.14.95.56.98.09.4
3.64.6
6.57.4
4.14.95.56.36.98.09.4
3.65.5
6.57.4
4.65.5
7.48.3
4.95.56.36.97.58.09.48.39.2
10.511.612.513.415.711.612.513.414.515.718.421.213.414.515.717.018.420.021.2
4.7
4.7
6.1
6.1
12.7
12.7
12.9
22.5
36.0
20253035405060
2030
3540
25303540506070
1525
3540
2530
4045
354045506070803540455055607055606570758090657075808590
4.14.95.56.36.98.09.4
5.57.4
8.39.1
4.95.56.36.98.09.4
11.0
4.66.5
8.39.1
6.57.4
9.110.0
6.36.97.58.09.4
11.012.710.511.612.513.414.515.718.414.515.717.018.420.021.224.217.018.420.021.222.524.2
6.6
6.6
8.7
8.7
18.0
18.0
18.0
31.5
50.6
35405060708090
3040
5060
40455060708090
3545
5560
4550
7080
45505560708090556065707580907075808590
808590
6.36.98.09.4
11.012.714.5
7.49.1
10.912.6
6.97.58.09.4
11.012.714.5
8.310.0
11.712.6
10.010.9
14.316.0
7.58.08.79.4
11.012.714.514.515.717.018.420.021.224.218.420.021.222.524.2
21.222.524.2
9.4
9.4
12.3
12.3
25.5
25.5
25.5
44.7
72.0
45505560708090
4560
7580
50607075809095
5065
8595
7585
95100
556065708090
100
7.58.29.09.7
11.112.714.5
10.012.6
15.216.0
8.29.7
11.112.012.714.515.1
10.913.5
16.818.5
15.216.8
18.519.4
9.09.7
10.511.112.714.516.0
13.2
13.2
17.4
17.4
36.0
36.0
AirPress.
psiscfm gph
AirPress.
psiscfm gph
AirPress.
psiscfm gph
AirPress.
psiscfm gph
AirPress.
psiscfm gph Air
psiLiquid
psiAin.
Bin.
Cin.
Dfeet
102530353560702030304560556010253540406075152535456060703040456580559015304045506080254040505560703045557070758040556575808085
335
102020405
102020203040335
102020403
1020202030405
102020203040335
20102040335
10201520335
10201520335
10152020
5"5"6"6"
6Q\„"6Q\„"6Q\„"
13"13"14"15"15"16"15"
6"6"6"6"
6Q\„"6Q\„"7"
13"14"15"13"12"13"13"
16"18"19"17"15"19"16"
6"6"7"8"
7Q\„"8"7"
6"6"6"
6Q\„"6Q\„"6Q\„"6Q\„"
6Q\„"7"7"7"8"7"8"
7Q\„"8"8"
8Q\„"8Q\„"8Q\„"8Q\„"
7Q\„"7Q\„"7Q\„"8Q\„"9"9"
8Q\„"
15"16"18"19"19"20"20"
7Q\„"7Q\„"8Q\„"8Q\„"10"10"9"
15"19"18"17"17"17"17"
22"23"23"21"20"25"22"
8"8Q\„"9Q\„"11"
10Q\„"11"9Q\„"
8"8"8"
8Q\„"8Q\„"9"9"
9Q\„"9Q\„"10"10"10"10"10"
10"10"10"10Q\„"10Q\„"10Q\„"10Q\„"
10"10"11"11"14"
14Q\„"12Q\„"
19"22"23"26"25"27"28"
10Q\„"10Q\„"13"14"
14Q\„"14Q\„"14"
20"25"25"24"23"24"24"
30"32"31"30"26"33"31"
10"11Q\„"14"
15Q\„"15"
15Q\„"15"
11Q\„"12"12"
12Q\„"13Q\„"13"
13Q\„"
13Q\„"14"14"14"15"15"15"
14"14Q\„"14Q\„"15"16"16"16"
5Q\„'9'10'
11Q\„'12'14'16'
12Q\„'14'13'15'17'15'16'
7'10'11'
12Q\„'13'16'19'
11Q\„'10'
12Q\„'14'16'17'13'
12'13'14'16'19'14'19'
9'10'
11Q\„'12'13'14'
19Q\„'
10'11'13'14'15'
15Q\„'18'
11Q\„'14'16'18'18'19'20'
15'16'17'18'18'19'20'
3 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch) 5 psi 10 psi 20 psi 40 psi
D12
AIR
AT
OM
IZIN
G
Air AtomizingNOZZLES
1/8JJ
Basic Nozzle Parts
PRESSURE SPRAY SET-UPS:
Round Spray
360° Circular Spray
Wide Angle Round Spray
Flat Spray
SIPHON SPRAY SET-UPS:
Round Spray
Flat Spray
D12
D13
D13
D14
D14
D15
D15
1/8JJ
NOZZLESERIES
GENERAL INFORMATION PAGE
1 2 3 4 5
= + + + +
1 2 3 4 6
= + + + + +
SPRAY SET-UP
SPRAY SET-UP
SHUT-OFF NEEDLE ASSEMBLYNO. 14486
MODEL 1/8JJ
MODEL 1/8JJN
MODEL 1/8JJCO
1. RETAINER RING – NO. 125822. AIR CAP3. FLUID CAP4. O-RING – NO. 7717-2/0075. NOZZLE BODY – NO. 128916. NOZZLE BODY – NO. 14468
CLEAN-OUT NEEDLE ASSEMBLYNO. 14471
1/8JJ
Air AtomizingPRESSURE SPRAY SET-UPS D
13
AIR
AT
OM
IZIN
G
DESIGN FEATURES
ROUND SPRAY AIR CAPSAir Caps used in these Spray Set-upsproduce a full cone, round spray.
360° CIRCULAR SPRAY AIR CAPAir Cap used in Spray Set-up SUJ340Cproduces a 360° circular spray patterns.*
For the Round Spray pattern,angle “A” is maintained through-out distance “B”. Beyond “B”, thespray becomes turbulent and willproject out to distance “D”.
When using a Pressure-FedLiquid System, the liquid issupplied to the nozzle underpressure. The liquid and com-pressed air or gas are mixedinternally to produce a completelyatomized spray.
ROUND SPRAY
SpraySet-up
No.
SUJ11
SUJ12A
SUJ12
SUJ22B
SUJ22
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid CapJ2050
+Air CapJ67147
Fluid CapJ2050
+Air CapJ73160
Fluid CapJ2850
+Air CapJ73160
Fluid CapJ40100
+Air Cap
J1401110Fluid CapJ60100
+Air Cap
J1401110
SPRAY DIMENSIONS
SpraySet-up
No.
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid CapJ60100
+Air Cap
J150-6-62-160HC
360° CIRCULAR SPRAY
ROUNDSPRAYPATTERN
12582Retainer
RingAir Cap
Fluid Cap
7717-2/007O-ring
Note: The No. 12582 Retainer Ring and7717-2/007 O-ring must beordered separately from the sprayset-up, but are included in thestandard nozzle assembly. SEE PAGE D3 FOR ORDERINGINFORMATION.
*Use only with 1⁄8 JJAU automatic air atomizing nozzles (see page D22).
101214
101214
12162024281620222630121416
.66
.48
.36
.66
.54
.42
1.261.08.90.78.76
3.442.351.901.23.728.16.64.9
.55
.67
.78
.66
.77
.90
.73
.941.151.361.562.683.203.463.974.482.002.322.66
141822263018202226
222630384228323644502022242832
1.501.23.99.72.45
1.441.321.20.90
2.161.741.441.08.94
5.033.702.641.30.76
13.612.010.27.24.6
.40
.50
.63
.76
.93
.87
.981.061.26
1.051.261.471.872.043.714.174.655.636.362.552.853.153.754.35
24283238422428323640303438465240444860703034384246
1.681.441.08.72.54
1.981.681.441.201.022.902.462.101.501.206.105.033.951.56.73
16.313.19.97.65.6
.56
.63
.821.031.191.001.171.351.571.761.241.421.652.032.364.725.175.657.128.353.253.754.324.905.50
32364048523034384448364044526048556580903842465256
1.861.621.32.85.66
2.402.161.921.501.324.323.853.552.461.867.755.953.551.40.72
19.516.513.69.67.6
.68
.80
.931.231.381.141.291.471.781.981.261.361.562.012.365.306.077.289.10
10.343.744.204.715.586.14
50545866704046526270485256647065758090
1005460657585
2.282.051.801.321.113.302.942.582.101.685.825.284.924.083.60
10.708.677.655.643.6225.721.818.512.28.0
.981.071.191.521.661.361.541.832.262.671.501.651.732.082.346.747.738.259.40
10.604.665.345.987.808.90
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
Airpsi
Liquidpsi
SprayAngle
Adeg.
Bin.
Dfeet
12243644621220344258223442486024405575851426405070
10203040601020304060102030406010203040601020304060
13°13°13°14°15°12°13°13°13°15°12°13°13°14°15°18°20°20°21°21°17°18°20°20°21°
12"13"14"15Q\„"17Q\„"
17"18"19"20"22"
19"20"21"22"23Q\„"
26"30"32"36"38"
24"27"30"31"36"
9101112Q\„14Q\„
12131415171314151617Q\„
16202226301619222328
10 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)
20 psi 30 psi 40 psi 60 psi
2022242628
4.02.82.01.51.1
2.452.7
2.973.3
3.62
3438424648
6.64.42.81.71.3
4.094.85.5
6.346.85
5052566070
7.16.24.43.21.3
6.386.757.558.41
11.75
6065708090
11.08.36.13.11.4
7.68.639.78
12.4415.4
859095
100
14.412.09.87.8
11.813.014.115.4
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
10 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)
20 psi 30 psi 40 psi 60 psi
*SUJ340C
SpraySet-up
No.
1/8JJ
Air AtomizingPRESSURE SPRAY SET-UPSD
14
AIR
AT
OM
IZIN
G
For the Wide-Angle Round andFlat Sprays, dimensions “A”, “B”,and “C” are the pattern widths atdistances from the nozzle asshown. The total distance ofspray projection from the nozzleto the maximum dispersal pointis represented by “D”.
PRESSURE SPRAY SET-UPSLiquid is supplied to nozzle underpressure. Liquid and compressedair or gas are mixed internally toproduce a finely atomized spray.
WIDE ANGLE ROUND AND FLATSPRAY AIR CAPSAir Caps used in these spray set-upsproduce a hollow cone type, wide-angleround spray and flat spray patterns.
Note: The No. 12582 Retainer Ring and 7717-2/007 O-ring must be ordered separatelyfrom the Spray Set-up, but are included inthe standard nozzle assembly. SEE PAGED3 FOR ORDERING INFORMATION
WIDE-ANGLE ROUND SPRAY
SpraySet-up
No.
SUJ16
SUJ26B
SUJ26
SUJ29
SUJ30
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid CapJ2050
+Air Cap
J67-6-20-70°Fluid CapJ40100
+Air Cap
J140-6-37-70°Fluid CapJ60100
+Air Cap
J140-6-37-70°Fluid CapJ60100
+Air Cap
J140-6-52-70°
Fluid CapJ40100
+Air Cap
J120-6-35-60°
SPRAY DIMENSIONS
FLAT SPRAY
SUJ13A
SUJ13
SUJ14
SUJ23B
SUJ23
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid CapJ2050
+Air CapJ73328
Fluid CapJ2850
+Air CapJ73328
Fluid CapJ2850
+Air CapJ73320
Fluid CapJ40100
+Air Cap
J125328
Fluid CapJ60100
+Air Cap
J125328
SPRAY DIMENSIONS
DESIGN FEATURES
WIDE ANGLE ROUNDSPRAY PATTERN
12582Retainer
RingAir Cap
Fluid Cap
7717-2/007O-ring
8101214
1214
101214
18222630341618202428
1.411.14.79.45
1.85.55
6.33.62.0
9.47.76.04.43.0
3.242.612.081.30.82
.36
.43
.50
.60
1.782.20
1.141.542.00
3.03.6
4.134.7
5.251.431.591.752.062.35
1416182226222426
20222426
30343846602832364246
2.101.901.681.17.55
3.302.201.20
9.06.95.13.3
13.411.910.37.32.4
4.603.372.451.451.0
.42
.50
.56
.71
.902.302.673.05
1.602.002.402.80
4.154.655.16.1
7.951.962.272.553.003.28
222630364030323640
30323640
44485570804246485565
2.362.021.61.91.43
5.104.252.50.70
11.29.35.42.3
15.313.811.36.13.3
5.274.0
3.452.111.03
.56
.69
.831.071.252.542.853.504.30
2.042.443.203.98
5.455.9
6.758.6
9.852.672.963.113.634.36
30343846503842465052404246505260708090
1005560657585
2.532.231.901.10.69
6.404.703.061.40.60
12.410.67.13.62.2
15.612.59.36.23.7
5.694.243.151.721.05
.68
.81
.941.261.452.843.424.054.845.342.542.923.724.514.917.058.259.4510.711.93.303.684.064.825.58
444855657554566070755658657580808590
100
808590
100
2.952.722.301.50.65
8.768.106.763.501.8516.214.89.84.02.4
21.419.517.915.1
7.105.804.653.00
.81
.941.201.602.053.443.744.326.006.952.753.114.426.316.518.559.159.75
10.95
4.504.885.276.03
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm Air
psiLiquidpsi
Ain.
Bin.
Cin.
Dfeet
10203442601224344660122234466528426585902240507090
10203040601020304060102030406010203040601020304060
5Q\„"6"
6Q\„"6Q\„"7Q\„"
7"7Q\„"7Q\„"
8"8Q\„"
7Q\„"8"8"8"8"
8"8"
8Q\„"9"
9Q\„"
6"6Q\„"6Q\„"
7"7Q\„"
7"7Q\„"
8"8"9"
9Q\„"10"10"
10Q\„"11"
10"10Q\„"10Q\„"
11"11"
10"10Q\„"
11"11Q\„"12Q\„"
7Q\„"8"8"
8Q\„"9Q\„"
9"9Q\„"10"
10Q\„"12"
12Q\„"13"13"
13Q\„"14Q\„"
14"14Q\„"14Q\„"
15"15Q\„"
13"13Q\„"14Q\„"
15"16"
9"9Q\„"9Q\„"10"11"
5'6'7'9'
13'
6'8'
10Q\„'13Q\„'19Q\„'
7'10Q\„'13Q\„'16Q\„'22Q\„'
18'21'27'30'34'
9'15'18'24'31'
10 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)
20 psi 30 psi 40 psi 60 psi
101214182212141620
18202226
16182024
12141620
1.441.251.09.79.53
2.171.801.45.77
1.04.80.62.35
2.952.251.721.00
7.05.44.22.7
.84
.961.081.321.55.70.82.951.2
1.051.151.251.45
1.922.102.302.70
1.151.351.571.97
18222634402024283236303436404428303236
2226303438
2.171.821.50.93.57
3.352.712.061.44.94
1.561.10.90.60.35
4.453.873.302.28
11.58.36.04.33.0
1.121.311.501.872.16.96
1.141.341.561.781.431.611.701.882.072.662.843.043.40
1.652.022.402.783.16
2832364455303438465042444650
38404246
3438424852
2.492.191.891.30.65
3.983.412.851.721.2
2.061.801.571.13
5.945.404.863.78
12.49.87.85.03.7
1.471.641.822.182.681.271.451.642.072.281.751.851.942.13
3.223.403.553.93
2.202.572.953.523.90
38424660703842466070556065
46505256604650546070
2.772.492.201.25.65
4.664.143.6
1.76.76
2.161.601.15
7.506.455.904.873.8413.710.98.76.43.3
1.842.012.192.813.251.491.651.852.583.092.152.382.62
3.663.974.154.504.902.753.143.514.065.00
55657590
1006570758595758085
65707585
65758090
100
3.412.832.261.40.884.8
4.213.632.481.573.202.662.19
9.708.607.505.30
18.312.610.66.94.5
2.432.853.263.884.292.382.622.863.353.852.662.903.13
4.805.205.606.48
3.564.474.955.856.76
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm Air
psiLiquidpsi
Ain.
Bin.
Cin.
Dfeet
16304050851630425080223846608020324254751632465685
10203040601020304060102030406010203040601020304060
10"14"15"
18Q\„"22"
14"17"20"23"23"
10"14"23"24"25"
6"9"
10"12"13"
7"9"
10"12"13"
14"19"21"24"29"
18"24"26"30"30"
13"20"29"29"30"
7"11"13"15"16"
9"12"13"15"16"
18"26"30"34"37"
28"32"35"38"38"
18"27"36"37"38"
8"13"18"18"19"
12"16"17"19"20"
8Q\„'10'
10Q\„'11'13'
7'8'
8Q\„'9'
10Q\„'
6'6Q\„'6Q\„'
7'7Q\„'
10'10Q\„'
11'11Q\„'
13'
11'11Q\„'
12'12Q\„'14Q\„'
10 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)
20 psi 30 psi 40 psi 60 psi
15"9"
6"
SpraySet-up
No.
SUJ4
1/8JJ
Air AtomizingSIPHON/GRAVITY-FED SPRAY SET-UPS D
15
AIR
AT
OM
IZIN
G
DESIGN FEATURES
ROUND SPRAY AND FLAT SPRAY AIR CAPSAir Caps used in these Spray Set-upsproduce a full cone, round spray and flatspray patterns.
Note: The No. 12582 Retainer Ring and 7717-2/007 O-ring must beordered separately from the Spray Set-up, but are included inthe standard nozzle assembly. SEE PAGE D3 FOR ORDERINGINFORMATION.
For the Round Spray pattern,angle “A” is maintained through-out distance “B”. Beyond “B”, thespray becomes turbulent and willproject out to distance “D”.
When using a Siphon or Gravity-Fed Liquid System, the liquid issupplied by either a liquid siphonor gravity feed. These Set-upsare designed to draw liquidthrough the feed line into the airflow where it is atomized.
ROUND SPRAY
SpraySet-up
No.
SUJ1A
SUJ1
SUJ2A
SUJ2
SUJ3
SUJ4B
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap J1650+
Air Cap J64
Fluid Cap J2050+
Air Cap J64
Fluid Cap J2050+
Air Cap J70
Fluid Cap J2850+
Air Cap J70
Fluid Cap J2850+
Air Cap J64-5
Fluid Cap J60100+
Air Cap J120
Fluid Cap J40100+
Air Cap J120
ATOMIZING AIR
Gravity Head Siphon Height
FLAT SPRAY
SUJF1
SUJF2C
SUJF3B
SUJF4B
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap J2850+
Air Cap J73420
Fluid Cap J35100+
Air Cap J120432
Fluid Cap J40100+
Air Cap J122435
Fluid Cap J40100+
Air Cap J122440
ATOMIZING AIR
Gravity Head Siphon Height
For the Flat Spray pattern, dimen-sions “A”, “B”, and “C” are thepattern widths at distances fromthe nozzle as shown. The total
distance of spray projection fromthe nozzle to the maximum disper-sal point is represented by “D”.
ROUND SPRAY PATTERN
FLATSPRAY PATTERN
a
aa15"
9"6"
.39
.46
.54
.59
.63
.73
.87
.98
.67
.76
.89
.981.191.371.571.48
1.681.91
3.203.475.806.506.806.80
.35
.43
.50
.54
.55
.66
.81
.92
.61
.72
.86
.961.051.271.471.41
1.221.561.81
2.572.963.245.155.956.356.40
.30
.39
.47
.49
.46
.60
.76
.88
.53
.64
.82
.94
.911.131.321.30
1.051.451.72
2.372.803.054.205.105.605.80
.23
.34
.41
.44
.40
.54
.71
.83
.43
.56
.76
.91
.56
.881.151.08.59.89
1.341.641.401.902.302.573.104.304.905.20
.18
.31
.38
.41
.32
.48
.67
.79
.37
.50
.71
.87
.47
.771.051.02.49.78
1.221.54.97
1.502.022.322.653.704.204.50
.14
.28
.36
.39
.21
.40
.61
.73
.29
.44
.65
.81
.38
.68
.91
.90
.29
.631.101.44.59
1.201.702.051.903.003.453.85
.14
.28
.31
.21
.43
.57
.21
.46
.68
.46
.63
.74
.26
.701.02
.34
.761.16.60
1.552.202.60
.19
.24
.07
.28
.40
.30
.56
.28
.52
.30
.56
.26
.52
.701.301.60
10204060102040601020406010204060102040601020406020406080
.40
.59
.951.32.47.66
1.061.48.81
1.201.942.70.68
1.031.702.39.41.61.99
1.361.301.973.124.281.903.004.105.20
AirPress.
psi
AirCapacity
scfm 18" 12" 6" 4" 8" 12" 24" 36"
Airpsi
SprayAngle
Adegrees
Binches
Dfeet
10204060102040601020406010204060102040601020406020406080
18°18°18°18°18°18°18°19°18°18°19°20°21°21°21°22°18°18°18°19°17°17°18°19°17°18°18°19°
11"11"12"14"
12"13"15"17"
12"13"15"17"
15"16"18"20"
12"13"15"17"
18"19"21"23"
18"20"21"23"
6'6Q\„'7Q\„'8Q\„'
7'7Q\„'8Q\„'10'
8'9'
11'13'
10'11'13'15'
8'9'
11'13'
10'11'13'15'
12'14'16'18'
LIQUID CAPACITY in gph (gallons per hour) SPRAY DIMENSIONSAt 8" Siphon Height
102030203040602030405020304050
.991.421.831.862.422.964.052.262.883.524.132.102.703.283.87
.35
.31
.181.01.88.76.44
1.351.26.98.58
2.012.001.821.10
.33
.30
.16
.95
.84
.73
.411.281.21.92.52
1.901.941.74.97
.30
.29
.15
.90
.81
.69
.371.201.14.87.44
1.711.811.63.85
.27
.26
.11
.77
.75
.65
.331.01.92.66
1.471.581.42.69
.25
.25
.09
.72
.71
.61
.30
.96
.87
.59
1.401.521.34
.22
.23
.67
.67
.58
.27
.92
.82
.52
1.321.451.22
.17
.19
.62
.63
.53
.78
.74
.44
1.171.341.03
.13
.16
.56
.57
.48
.62
.59
.921.11
AirPress.
psi
AirCapacity
scfm 18" 12" 6" 4" 8" 12" 24" 36"
Airpsi
Ain.
Bin.
Cin.
Dfeet
10203020304060203040
203040
8"8Q\„"
9"
9"9Q\„"
10Q\„"11"
7Q\„"8"
8Q\„"
6Q\„"7"8"
10Q\„"11Q\„"
12"
12Q\„"13Q\„"14Q\„"15Q\„"
9"10"
10Q\„"
8Q\„"9"
10Q\„"
15"15"15"
15"16Q\„"
18"19"
10Q\„"11"12"
10Q\„"11Q\„"
13"
7'7'6'
9'9'
10'9'
11'11'10'
11'11'11'
LIQUID CAPACITY in gph (gallons per hour) SPRAY DIMENSIONSAt 8" Siphon Height
SIPHONHEIGHT
HEAD
AIR
AIR
1/2J
Air AtomizingNOZZLESD
16
AIR
AT
OM
IZIN
G
Basic Nozzle Parts
PRESSURE SPRAY SET-UPS:
Wide-Angle Round Spray
Round Spray
Flat Spray
External Mix Flat Spray
360° Circular Spray
SIPHON SPRAY SET-UPS:
Round Spray
D16
D17
D17
D17
D18
D18
D18
NOZZLESERIES
GENERAL INFORMATION PAGE
4
+ +
+
321 5
++= +
+
MODEL 1/2J SPRAY SET-UP
MODEL 1/2JN
MODEL 1/2JCO
CLEAN-OUT NEEDLE ASSEMBLYNO. 12819
SHUT-OFF NEEDLE ASSEMBLYNO. 12813
PLUGNO. 1706
1. RETAINER RING – NO. 17052. AIR CAP3. FLUID CAP4. FLUID CAP GASKET – NO. 84915. NOZZLE BODY – NO. 1701
1/2J
1/2J
Air AtomizingPRESSURE SPRAY SET-UPS D
17
AIR
AT
OM
IZIN
G
DESIGN FEATURESFor the Wide-Angle Round,Round and Flat Sprays,dimensions “A”, “B”, and “C” are the pattern widths atdistances from the nozzle asshown. The total distance ofspray projection from the nozzleto the maximum dispersal pointis represented by “D”.
PRESSURE SPRAY SET-UPSLiquid is supplied to nozzle underpressure. Liquid and compressedair or gas are mixed internally toproduce a finely atomized spray.
WIDE-ANGLE ROUND SPRAY AIR CAPSAir Caps used in these Spray Set-upsproduce a hollow cone type, wide-angleround spray pattern.
*Note: Ordered separately.WIDE-ANGLE ROUND, ROUND & FLAT SPRAY
SpraySet-up
No.
SU77WideAngleRound
SU78WideAngle Round
SU79WideAngle Round
SU89WideAngleRound
SU72 Round
SU82 Round
SU75 Flat
SU85 Flat
Spray Set-upConsists of Fluid andAir Cap
Combination
SprayPattern
Fluid Cap250375
+Air Cap
422-6-73-70°Fluid Cap250375
+Air Cap
422-6-94-70°
Fluid Cap250375
+Air Cap
469-6-125-70°
Fluid Cap251376
+Air Cap
469-6-130-70°
Fluid Cap250375
+Air Cap
4221250
Fluid Cap251376
+Air Cap
4691312
Fluid Cap250375
+Air Cap
4533102
Fluid Cap251376
+Air Cap
4693102
SPRAY DIMENSIONS
Air CapFluid Cap
8491 Gasket*
1705 Retainer Ring27"
18"9"
81012
101214
1012
18202224
1012
1012
27.015.08.4
34.221.612.0
35.426.4
9.06.75.44.1
35.426.4
35.426.4
6.58.29.8
11.413.014.7
11.113.4
12.413.714.715.7
11.113.4
11.113.4
18202224
2628303234
18202224
28323638404218202224
2830323436
18202224
42.029.420.214.4
46.237.228.421.616.2
10381.663.649.3
31.722.515.913.211.19.210381.663.649.3
3931.824.619.815.0
10381.663.649.3
7.08.8
10.512.2
20.222.023.725.327.0
15.417.619.822.6
14.917.019.320.421.522.615.417.619.822.6
22.424.025.927.529.1
15.417.619.822.6
2830
32343638404042444648502628303234363840
3844505458602628303234363840
4446485052
2628303234363840
33.019.8
47.036.025.218.613.862.652.843.833.625.218.015513511510084
69.556.445.7
58.037.724.719.516.014.515513511510084
69.556.445.7
44.137.231.227.020.6
15513511510084
69.556.445.7
8.410.8
11.012.814.716.618.627.529.631.633.635.637.517.720.022.525.127.530.032.635.3
17.320.824.827.530.231.817.720.022.525.127.530.032.635.3
31.533.535.136.938.7
17.720.022.525.127.530.032.635.3
4042
4648505254545658606265363840424446485052
485460667278363840424446485052
5860636570
363840424446485052
28.815.6
42.632.425.819.815.675.657.046.839.033.025.818016214713111610181.575.662.4
80.055.240.030.023.318.318016214713111610181.575.662.4
53.045.638.031.021.0
18016214713111610181.575.662.4
11.313.9
18.120.222.224.025.832.634.335.837.338.841.223.025.427.830.232.635.137.640.242.7
19.323.627.532.137.042.223.025.427.830.232.635.137.640.242.7
40.042.044.047.052.5
23.025.427.830.232.635.137.640.242.7
586062
707580
758085
545658606264666870727476
545658606264666870727476
545658606264666870727476
66.042.025.2
81.033.022.2
12710898.0
22219818618016615414213011910897.487.5
22219818618016615414213011910897.487.5
22219818618016615414213011910897.487.5
12.215.018.2
29.534.539.6
39.042.445.6
29.131.234.036.338.941.644.146.649.351.654.257.1
29.131.234.036.338.941.644.146.649.351.654.257.1
29.131.234.036.338.941.644.146.649.351.654.257.1
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm Air
psiLiquidpsi
Ain.
Bin.
Cin.
Dfeet
304060
10203650751230466080
1020324464
20365060
1020324464
2030405060701020324464
253555
5152535555
15253555
515253555
5152535
515253555
1015202535405
15253555
13Q\„"13Q\„"
14"
13"13Q\„"
13"13Q\„"
14"
14"13Q\„"
13"14"14"
13"13"11"11"11"
3Q\„"
4"6"5"4"4"
17"18"19"20"24"26"
20"34"34"36"36"
19"19"
19Q\„"
18Q\„"19"
18Q\„"19"19"
19Q\„"19"
18Q\„"19Q\„"19Q\„"
25"26"22"21"22"
6Q\„"
7"10"8"7"7"
28"29"30"31"36"39"
34"62"62"66"67"
26Q\„"26Q\„"
27"
25Q\„"26Q\„"25Q\„"26Q\„"
27"
27"26Q\„"
26"27"28"
36"36"32"29"31"
10"
9"13"10"10"10"
35"36"37"38"43"46"
47"83"82"85"89"
222428
20262124272624232830
1116202225
22242730
2321374147
1819212327291315171921
5 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)15 psi 25 psi 35 psi 55 psi
SUE75
SU380C
1/2J
Air AtomizingSPRAY SET-UPSD
18
AIR
AT
OM
IZIN
G
FLAT SPRAY, 360° CIRCULAR SPRAYAND ROUND SPRAY AIR CAPSExternal Mix Air Caps used in these SpraySet-ups produce a flat spray and 360°circular spray patterns and the Siphon AirCaps produce round spray pattern.
*Note: Ordered separately.
For the Flat and Round Sprays,dimensions “A”, “B”, and “C” arethe pattern widths at distancesfrom the nozzle as shown. Thetotal distance of spray projectionfrom the nozzle to the maximumdispersal point is represented by “D”.
When using a Pressure-FedLiquid System, the liquid is sup-plied to the nozzle under pressure.The liquid and compressed air orgas are mixed internally to producea completely atomized spray.
FLAT SPRAY (External Mix)
SpraySet-up
No.
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap250375
+Air Cap14356
SPRAY DIMENSIONS
SpraySet-up
No.
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap251376
+Air Cap
469-6-130-160HC
360° CIRCULAR SPRAY
SIPHON SET-UPS—ROUND SPRAY
SpraySet-up
No.
SU70
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap 250375
+Air Cap
437
ATOMIZING AIR
Gravity Head Siphon Height
liquid-siphoned or gravity-fed
Spray Pattern
360°Circular Spray
SEE PAGE D3 FOR ORDERINGINFORMATION.
SEE PAGE D3 FOR ORDERINGINFORMATION.
DESIGN FEATURESAir Cap
Fluid Cap
8491 Gasket*
1705 Retainer Ring*
FLAT SPRAY PATTERN
Air CapFluid Cap
8491 Gasket
1705 Retainer Ring
27"18"
9"
27"18"
9"
30354045
313438
41.5 138
4045505560
3841.5
4548
51.5180
455055606570
41.54548
51.55558
210
556070758085
4851.5
58626569
252
80859095
100
6569727578
306
AirPress.
psiscfm gph
AirPress.
psiscfm gph
AirPress.
psiscfm gph
AirPress.
psiscfm gph
AirPress.
psiscfm gph Air
psiLiquid
psiAin.
Bin.
Cin.
Dfeet
3550557090
357
1015
8Q\„"9"
9Q\„"9Q\„"10"
14Q\„"16Q\„"17Q\„"
18"19"
20Q\„"21Q\„"
23"24"26"
1922232529
3 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)
5 psi 7 psi 10 psi 15 psi
14161820
56.438.425.815.6
12.214.816.819.0
2426283032343638
10485.872.654.642.030.624.67.2
16.018.620.322.724.826.829.331.8
3638404244464850
11698.485.273.272.049.838.430.0
22.424.826.528.930.932.935.037.8
48505254565860626466
12211098.485.874.466.055.244.437.220.4
27.829.831.533.836.038.340.142.044.545.8
727476788082848690
12811610896.685.878.667.861.248.0
40.242.344.346.348.350.552.554.859.0
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
AirPress.
psigph scfm
10 psi
LIQUID CAPACITY in gph (gallons per hour) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)20 psi 30 psi 40 psi 60 psi
1020304050607080
12.718.524.029.234.840.146.151.0
79.881.983.284.6
67.670.572.174.576.2
58.862.863.566.067.6
10.722.832.438.843.045.448.049.8
13.924.831.235.238.341.443.2
13.822.727.630.533.936.0
9.513.816.5
AirPress.
psi
AirCapacity
scfm 18" 12" 6" 4" 8" 12" 24"
Airpsi
Ain.
Bin.
Cin.
Dfeet
20304050607080
3" 6" 8Q\„"
20222426293235
LIQUID CAPACITY in gph (gallons per hour) SPRAY DIMENSIONSAt 8" Siphon Height
SIPHONHEIGHT
HEAD
AIR
AIR
1J
Air AtomizingNOZZLES D
19
AIR
AT
OM
IZIN
G
Basic Nozzle Parts
PRESSURE SPRAY SET-UPS:
Wide-Angle Round Spray
Round Spray
Flat Spray
External Mix Flat Spray
SIPHON SPRAY SET-UPS:
Round Spray
D19
D20
D20
D20
D21
D21
NOZZLESERIES
GENERAL INFORMATION PAGE
3
+++=
21 4
+
MODEL 1J
1. RETAINER RING – NO. 5713 FOR STANDARD SET-UP, ANDNO. 12415 FOR EXTERNAL MIX SET-UP
2. AIR CAP3. FLUID CAP4. NOZZLE BODY – NO. 5710
PLUGNO. 5714
SHUT-OFF NEEDLE ASSEMBLYNO. 12814
SPRAY SET-UP
MODEL 1JN
1J
SU152
1J
Air AtomizingPRESSURE SPRAY SET-UPSALL PATTERNS
D20
AIR
AT
OM
IZIN
G
For the Wide-Angle Round,Round and Flat Sprays,dimensions “A”, “B”, and “C” are the pattern widths atdistances from the nozzle asshown. The total distance ofspray projection from the nozzleto the maximum dispersal pointis represented by “D”.
PRESSURE SPRAY SET-UPSLiquid is supplied to nozzle underpressure. Liquid and compressedair or gas are mixed internally toproduce a finely atomized spray.
WIDE-ANGLE ROUND, ROUND AND FLAT SPRAY AIR CAPSAir Caps used in these Spray Set-upsproduce a hollow cone type, wide-angleround spray, and flat spray patterns.
Note: The No. 5713 Retainer Ring mustbe ordered separately from theSpray Set-up, but is included in thestandard nozzle assembly. SEE PAGE D3 FOR ORDERING INFORMATION.
WIDE-ANGLE ROUND, ROUND & FLAT SPRAY
SpraySet-up
No.
SU159WideAngleRound
Round
SU172 Round
SU155 Flat
Spray Set-upConsists of Fluid andAir Cap
Combination
SprayPattern
Fluid Cap4371000
+Air Cap
1109-6-224-70°
Fluid Cap4371000
+Air Cap
11091547
Fluid Cap6251000
+Air Cap
11251625
Fluid Cap4371000
+Air Cap
11093187
SPRAY DIMENSIONS
DESIGN FEATURES
Air CapFluid Cap
5713 Retainer Ring
48"30"
12"
121416
121416
12141618
121416
3.22.41.7
3.22.41.7
5.924.403.452.75
3.22.41.7
435161
435161
48.582
128187
435161
222426283032
222426283032
202224262830222426283032
5.14.13.32.62.01.6
5.14.13.32.62.01.6
11.09.17.8
6.725.955.255.14.13.32.62.01.6
5262728594
104
5262728594
104
42.56080
1101431835262728594
104
3234363840424446
3234363840424446
3032343638403234363840424446
6.55.54.53.63.12.62.21.8
6.55.54.53.63.12.62.21.8
13.211.710.49.4
8.457.756.55.54.53.63.12.62.21.8
64758696
106116128136
64758696
106116128136
556985
10212515064758696
106116128136
42444648505254565860
42444648505254565860
40424446485042444648505254565860
7.76.75.74.94.23.63.12.72.32.0
7.76.75.74.94.23.63.12.72.32.0
15.113.812.611.610.79.77.76.75.74.94.23.63.12.72.32.0
7990
100110120132140150164176
7990
100110120132140150164176
667893
1091251457990
100110120132140150164176
60626466687072747680866062646668707274768086606570
6062646668707274768086
10.69.58.47.56.86.15.55.04.53.72.9
10.69.58.47.56.86.15.55.04.53.72.9
18.315.813.5
10.69.58.47.56.86.15.55.04.53.72.9
9910811813014215216617819021525599
10811813014215216617819021525579
107138
99108118130142152166178190215255
AirPress.
psigpm scfm
AirPress.
psigpm scfm
AirPress.
psigpm scfm
AirPress.
psigpm scfm
AirPress.
psigpm scfm Air
psiLiquidpsi
Ain.
Bin.
Cin.
Dfeet
142632384650606086
142632384650606086
1424364665
142632384650606086
102020303040406060
102020303040406060
1020304060
102020303040406060
19"21"17"21"16"20"17"22"15"
4"4"4"4"4"4"4"5"4"
6"6"6"6"6"
29"32"23"34"27"37"29"49"25"
37"40"33"41"33"44"40"47"31"
8"8"9"9"
10"9"
10"9"
10"
11"11"10"10"11"
60"64"50"72"52"72"59"88"63"
55"59"47"58"49"62"54"67"41"
12"13"13"13"14"14"15"13"15"
13"14"14"14"15"
84"92"70"96"70"
104"88"
126"92"
14'19'25'29'37'37'46'42'61'
30'36'41'45'53'54'63'59'83'
25'30'35'42'50'
21'23'26'27'30'30'33'31'39'
10 psi
LIQUID CAPACITY in gpm (gallons per minute) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)20 psi 30 psi 40 psi 60 psi
SpraySet-up
No.
SpraySet-up
No.
1J
Air AtomizingSPRAY SET-UPS D
21
AIR
AT
OM
IZIN
G
DESIGN FEATURES
FLAT SPRAY AND ROUNDSPRAY AIR CAPSExternal Mix Air Caps used in these Spray Set-ups produce a flat spray pattern and Siphon Air Caps produce around spray patterns.
Note: The No. 12415 Retainer Ring mustbe ordered separately from theSpray Set-up, but is included in the standard nozzle assembly. SEE PAGE D3 FOR ORDERINGINFORMATION.
For the Flat Spray, dimensions“A”, “B”, and “C” are the patternwidths at distances from thenozzle as shown. The total dis-tance of spray projection from thenozzle to the maximum dispersalpoint is represented by “D”.
When using a Pressure-FedLiquid System, the liquid is supplied to the nozzle underpressure. The liquid and com-pressed air or gas are mixedexternally to produce a completely atomized spray.
For the Round Spray, dimensions“A”, “B”, and “C” are the patternwidths at distances from thenozzle as shown. The total dis-tance of spray projection from thenozzle to the maximum dispersalpoint is represented by “D”.
When using a Siphon or Gravity-Fed Liquid System, the liquid issupplied by either a liquid siphonor gravity feed. These set-upsare designed to draw liquidthrough the feed line into the airflow where it is atomized.
FLAT SPRAY (External Mix)
SprayPattern
FlatSUE175B
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap625780
+Air Cap12116
SPRAY DIMENSIONS
SIPHON SET-UP—ROUND SPRAY
SU170
Spray Set-upConsists of Fluid andAir Cap
Combination
Fluid Cap 6251000
+Air Cap 1125
ATOMIZING AIR
Gravity Head Siphon Height
Air CapFluid Cap
12415Retainer Ring
FLATSPRAY PATTERN
48"30"
12"
202530405060
87101115140166191
13
253040506070
101115140166191216
17
304050607080
115140166191216242
20
405060708090
140166191216242268
23
5060708090
166191216242268
29
AirPress.
psiscfm gpm
AirPress.
psiscfm gpm
AirPress.
psiscfm gpm
AirPress.
psiscfm gpm
AirPress.
psiscfm gpm Air
psiLiquid
psiAin.
Bin.
Cin.
Dfeet
3040506070
357
1015
20"22"23"22"22"
36"37"39"38"39"
47"48"51"49"50"
2528303235
3 psi
LIQUID CAPACITY in gpm (gallons per minute) and AIR CAPACITY in scfm (standard cubic feet per minute)LIQUID PRESSURE in psi (pounds per square inch)5 psi 7 psi 10 psi 15 psi
202530406080
100
105120135165225285345
5.25.35.45.55.65.7
4.54.64.74.95.05.1
3.43.63.83.94.24.44.5
1.92.22.42.62.93.03.1
1.41.82.22.32.4
1.11.51.61.7
.4
.5
.6
AirPress
psi
AirCapacity
scfm 18" 12" 6" 4" 8" 12" 18"
Airpsi
Ainches
Binches
Cinches
Dfeet
30406080
100
5" 10" 15"
2935445464
LIQUID CAPACITY in gpm (gallons per minute) SPRAY DIMENSIONSAt 8" Siphon Height
Air AtomizingJAU AUTOMATIC AIR ACTUATED NOZZLE ASSEMBLIES
D22
AIR
AT
OM
IZIN
G
45°COMPACT
DESIGN FEATURES
COMMON APPLICATIONS
SINGLE AIR
The Automatic Air AtomizingNozzle is a compact, precisionnozzle. It is available in a widevariety of Spray Set-ups that give a complete selection of
capacities and spray patterns.Typical applications include dielubrication, spray injection, webspraying, moistening, andpattern lubrication.
The MODEL 1/8JJAU SprayNozzle is a compact automaticatomizing nozzle with theoperating features of the JAUSeries, and is specially designedfor use in small areas. Air andliquid inlets are !\°) NPT or BSPT(F) pipe connections. A minimumpressure of 30 psi (2 bar) for aircylinder operation and a maxi-mum liquid pressure of 125 psi(9 bar) are recommended. Writefor Data Sheet 14402.
The MODEL 16883-1/8JJAU is a compact automatic nozzlefeaturing a single inlet for bothatomizing and cylinder air. Thenozzle is designed to spray at a45° angle to the nozzle inlet axis.Write for Data Sheet 16992.
MODELS 1/4JAU and 10880-1/4JAU feature !\›) NPT or BSPT(F) air and liquid inlets and !\°)NPT or BSPT (F) air cylinderinlets. Write for Data Sheet 4547.
The MODEL 1/4JAU is used withsmaller capacity fluid caps, whilemodel 10880-1/4JAU is specifiedfor use with Spray Set-ups con-taining fluid cap 80150 or 100150.Write for Data Sheet 10880.
The 6218-1/4JAU features asingle air line used both for sprayatomization and for operation ofthe air cylinder. The single airline is regulated at the desired‘on-off’ cycle time causingsimultaneous flow of atomizingair and liquid. The nozzleoperates up to 180 cycles perminute and requires a minimumair pressure of 30 psi (2 bar).Write for Data Sheet 6218.
The JAU Series Automatic AirAtomizing Nozzle features aninternal air cylinder for controlled‘on-off’ operation up to 180 cyclesper minute. The ‘on-off’ cycleinterrupts only the liquid portionof the spray. (Liquid flow to thenozzle may be by siphon orgravity feed, or by pressure feed.)
All nozzle parts are manufacturedto precision, quality-controlledstandards for smooth operationand long service life. Nozzlesare made in a choice of nickel-plated brass or stainless steel, orcan be made in special materialsto your order. All nozzles featurea hard drawn stainless steelneedle, stainless steel fluid cap,and stainless steel return spring.
LUBRICANT APPLICATION MOISTURIZING CORRUGATEDPAPER BOARD
A Liquid StrainerB Pressure Regulator,
Non-Relieving Type, with GaugeC 1⁄4JAU Air Atomizing NozzleD Split-Eyelet ConnectorE Solenoid Valve—3-WayF Pressure Regulator with GaugeG Air FilterH Solenoid Valve—2-Way
LIQUID INLETNPT or BSPT, female
AIR INLETNPT or BSPT, female
1/8JJAU
AIR
G
G
AIR
H
F
E
D
C
B
A
Liquid
SHUT-OFF NEEDLEhard drawnstainless steel
RETURN STROKESPRING
stainless steel springfor instantaneous
shut-off.
AIR OPERATEDCYLINDER
for instantaneous retraction of shut-off
needle to start spraying.
STANDARD
D23
AIR
AT
OM
IZIN
G
STANDARDSHUT-OFF EXTENSION
ORDERING INFORMATION
ADJUSTABLE
The Model 19330-1/4 JAUPMAdjustable Spray Nozzle has the same features as the 1/4 JAUPM, but also features a regulating screw for preciseadjustment of the spray atomiza-tion. The included hex lock nutholds the spray atomizationregulating screw firmly in place.The adjustable model of the 1/4JAUPM offers the same choiceof Set-ups as the 1/4JAU SprayNozzle. The nozzle body isattached to the mounting plateby a single nut for easy removaland replacement. The rear of themounting plate contains all inletspermitting fast, easy servicing ofthe nozzle without disturbing airand liquid line connections. Writefor Data Sheet 19330.
The MODEL 1/4JAUPM SprayNozzle features the spray nozzlebody held to a mounting plate, inaddition to the same operatingfeatures and choice of set-upsas the 1/4JAU Spray Nozzle.The nozzle body is attached tothe mounting plate by a singlenut for easy removal or replace-ment. The rear of the mountingplate contains all inlets, permit-ting fast, easy servicing of thenozzle without disturbing air andliquid line connections. Write forData Sheet 4776.
The MODEL 1/4JAUPMCOSpray Nozzle combines thefeatures of both the nozzle bodyheld in a mounting plate and aclean-out needle extension.
The MODEL 6218-1/4JAUPMfeatures a single air line usedboth for spray atomization andfor operation of the air cylinderand in addition, has the nozzlebody held in a mounting plate bya single nut. All inlets are at therear of the mounting plate,providing quick and easy serviceof the nozzle without disturbingair and liquid line connections.Write for Data Sheet 18586.
The MODEL 17690-1/8JJAUnozzle features an extension toprovide forward positioning ofthe Spray Set-up as well as the same operating features asthe 1/8JJAU. Extensions aresupplied in 3", 6", 9", or 12" (8cm, 15 cm, 23 cm, or 30 cm)lengths with the needle shut-offat the fluid cap. Write for DataSheet 17740
The MODEL 6083-1/4JAUfeatures an auxiliary shut-offassembly in addition to the sameoperating features of the 6218-1/4JAU. The auxiliary shut-offassembly allows temporaryliquid shut-off of individualnozzles in a system. Write forData Sheet 6083.
PLATE MOUNTEDNOZZLE ASSEMBLIES
The MODEL 7310-1/4JAU SprayNozzle features a knurled headscrew control in addition to theoperating features of the 1/4JAU.The screw control permitsmanual nozzle shut-off withoutdisturbing the operation of othernozzles on a manifold. Write forData Sheet 7310.
The MODEL 1/4JAUCO featuresa 5359 clean-out needle extensionin addition to the same overalldesign and operating features asthe 1/4JAU Spray Nozzle. Thefluid orifice is cleaned out by theneedle extension with each ‘on-off’ cycle of the nozzle.
The MODEL 6123-1/4JAU SprayNozzle features an extension toprovide forward positioning ofthe nozzle spray set-up as wellas the same operating featuresas the 1/4JAU. Extensions aresupplied in either 6" (15 cm) or12" (30 cm) lengths. The nozzlediameter at the end of theextension is less than 1" (2.5 cm).Write for Data Sheet 6123.
Automatic Air Actuated NozzleAssemblies:Please telephone or write for orderingassistance.
pg.D22
pg. D27
pg. B3
COMPONENTS TO SIMPLIFY NOZZLE INSTALLATION
SUV67B-SSSUV67A-SSSUV67-SS
SUV113A-SSSUV113-SSSUV128-SSSUV152-SS
37459M-V67B37459M-V67A37459M-V67
37459M-V113A37459M-V11337459M-V12837459M-V152
Air AtomizingVARIABLE SPRAY AUTOMATIC NOZZLES
D24
AIR
AT
OM
IZIN
G
VAU
The VAU variable spray AutoJetnozzle provides independentcontrol of liquid, atomizing air,and fan air pressures for finetuning of flow rate, drop size,spray distribution and coverage.
The VAU nozzle was designedfor moisturizing and coatingprocesses that require precisespray distribution and coverage.
Its intricate design makes thenozzle ideal for spraying viscousliquids as well.
An independent air atomizingline can be adjusted to varyspray drop size without affectingliquid flow rates. An additionalinlet/outlet port allows for liquidrecirculation which effectivelymaintains the flow of viscous
liquids. A built-in orifice clean-outneedle can be actuated to virtu-ally eliminate nozzle plugging.
The VAU nozzle can utilize anyof seven different spray set-upsthat provide flow rates rangingfrom 0.74 gph (2.8 l/h) to 47 gph(179 l/h).
Atomizing air, fan air, and liquidflow rate settings can be set and
reset in seconds. Thus, settingscan be changed to suit onespray application and set back topreviously determined settingsfor a different application.
Automatic “on/off ” operation upto 180 cycles per minute.Minimum of 35 psi (2.4 bar) airpressure for operation of aircylinder.
independent control of flow rate and spray pattern
ⓦ Coating
ⓦ Moisturizing
ⓦ Spraying viscous liquids
ⓦ Recirculating systems
The widths (A, B, C) of the flat spray pattern are controlled by thecombination of fan air pressure and atomization air pressure. Theliquid flow rate is constant and not affected by the air pressures.
1/8VAU-SS nozzle with
Spray set-up
No. SUV128-SS
•consisting
of VF60100-SS
fluid cap &
VA1282125-60-SS air cap
A B C A B C A B C A B C A B C
Note: The data for Set-up SUV128-SS is typical of the performance information that is provided for each of the available Spray Set-ups.
Spray Set-up No. Data Sheet Number
PERFORMANCE DATA
DESIGN FEATURES
COMMON APPLICATIONS
ORDERING INFORMATIONSpecify Nozzle no. plus the Spray Set-up no.
Example:
1/8VAU-SS+SUV128-SSNozzle
No.Spray Set-up
No.
*At 0 bar fan air pressure, the spray forms a round spray pattern.
Fan Air
AtomizedLiquid
Fan Air
Flat SprayPattern
15"
9"
6"
Atom. air
press. (psi)
Waterpress.(psi)
10
20
30
40
31020310203102031020
Spray coverage (inches) @ indicated distance from nozzle… @ fan air pressure (psi)0 psi* 5 psi 10 psi 20 psi 40 psi
3--3--3
2.5-3
2.52.5
4--4--4
3.5-4
3.53.5
5--5--55-
5.555
4.5--33-
3.53-3
3.53
6--45-
4.54-
4.54.54
8--66-
6.55.5-66
6.5
7--55-44-
3.543
10--77-66-555
13--910-8
8.5-778
1211-98-67-666
1615-
1212-89-888
2022-
1816-
1115-
1110.511
-211714141312121110119
-2622181919141615121413
-3330262625212221172017
Liquid capacity (gph)
3 psi 20 psi
.741.12.23.64.91018
1.92.95.69.412.82647
10535-1/4J
10536-1/2J
10537-1J
STORAGE BIN FUMIGATION
Air AtomizingAUTOMATIC AIR ACTUATED NOZZLE ASSEMBLIES
D25
AIR
AT
OM
IZIN
G
10535-1/4J 10536-1/2J 10537-1J
DESIGN FEATURES
COMMON APPLICATIONS
ORDERING INFORMATION
PERFORMANCE DATA
1⁄4" inlet 1⁄2" inlet 1" inlet
The J series AutoJet AirAtomizing Nozzles mix air andliquid supplied at line pressuresup to 125 psi (9 bar) to producefine atomization. The self-contained air cylinder providescontrolled on-off operation at anydesired frequency up to 180cycles per minute. This AutoJetseries features a spray nozzlebody assembly that is completelyseparate from the air cylinderassembly for minimal mainte-nance and fast, easy, cleaning ofthe nozzle. The TEFLONpackings and gaskets in the
nozzle withstand continuous useat temperatures up to 400°F(205°C) and the air cylinderpacking is recommended fortemperatures up to 150°F (65°C).A wide range of capacities up to29 gallons per minute (110 l/min),and a choice of round, wideangle round, and flat spray patterns are available with eithersiphon or pressure Set-Ups.
The J series AutoJet nozzlebody assemblies are made in achoice of nickel-plated brass orcorrosion-resistant stainless
steel and are built to provide uniform distribution of the atom-ized spray with dependable drip-free cycling operation. (Any liquidthat flows may be sprayed withthese nozzles. For very viscousfluid, External Mix Flat SpraySet-Ups are recommended.)
Automatic Air Actuated NozzleAssemblies:Please telephone or write for orderingassistance.
Nozzle No.
*1J does not require fluid cap gasket. / **Also available with 1⁄8) NPT or BSPT connection.
Q\‰"
Q\„"
1)
1⁄8"
1⁄4"**
3⁄8"
TEFLON
Round, Wide AngleRound and Flat SpraysExternal Mix Flat SprayRound, Wide AngleRound and Flat SpraysRound Spray
P. D6-D11
P. D10, D11
P. D17, D18
P. D20, D21
Atomizing Airand Liquid Inlet
ConnectionsNPT or BSPT (F)
Type PatternsFor Spray Set-up
CapacitiesRefer to:
Available Spray Patterns and Capacities Dimensions Packing andFluid CapGasket*Material
MinimumOperatingPressure
Air CylinderInlet Conn.
FemaleNPT or BSPT
Write for Data Sheet 10535.
Write for Data Sheet 10536.
Write for Data Sheet 10537.
.13 GPH-72 GPH
4 GPH-306 GPH
24 GPH-1740 GPH
6Q\‰"
7Q\„"
11Q\„"
3Q\‰"
3Q\„"
5"
1 lb.-8 oz.
2 lbs.-14 oz.
9 lbs.-10 oz.
30 psi
Capacity Rangein gph
(gallons per hour)OverallLength
OverallHeight
NetWeight
A B C D
E
I
F G H
J
Air AtomizingD26
AIR
AT
OM
IZIN
G
3404SIPHON
PRESSURE FED
PERFORMANCE DATA
DESIGN FEATURES 61101/4JH
1/4JTA totally enclosed unit, except forhumidistat, supplied completelyassembled ready for connectionto air, water and electric lines.Cabinet assembly includes spraynozzles, air filter, air pressureregulator with gauge, solenoid-operated air valve, and watertank with float. Each nozzle is aspecial 1/4JHC Air AtomizingNozzle designed for use with thisunit. Choice of either No. SU1Aor No. SU2A Set-ups asdescribed in the table on thispage. Nozzle orifices should bea minimum of 12" (30 cm) belowceiling when installed. Eachnozzle may be directed to left orright for spray projection asdesired. Overall size of cabinet is14#\›" high x 13&\°" wide x 6"deep (38 cm high x 35 cm widex 15 cm deep). Net weightincluding humidistat is 28 lbs.(12.7 kg). For layout informationwrite for Data Sheet 3404.
The No. 6110 Humidifying Unitincludes all componentsrequired for an installationexcept the pipe and wiring. Thespray nozzles are assembled tothe float tank. The othercomponents include air filter, airpressure regulator with gauge,solenoid-operated air valve andhumidistat. The 1/4JH AirAtomizing Nozzles supplied withthis Unit are offered with choiceof either No. SU1A or No. SU2ASpray Set-up. See the table onthis page for capacities. Nozzle orifices should be a minimum of12" (30 cm) below ceiling wheninstalled. Each nozzle can bedirected to right or left as desired.Overall tank size including toppiping is 10" high x 12!\¤" wide x 5" deep (25 cm high x 32 cmwide x 13 cm deep). Net weightfor all equipment is 17 lbs. (7.7 kg). For layout informationwrite for Data Sheet 6110.
Spraying Systems Co. suppliescomplete equipment forhumidification systems exceptpiping and wiring. 1/4JH AirAtomizing Nozzles installed asshown provide automatic,efficient humidity control with lowinstallation and operating costs.Nozzles operate either withcompressed air drawing waterfrom the float box by siphonaction, or with water beingdelivered to the nozzle underpressure. 1/4JT has built-instrainers for air and water plus aball check valve in the water line.Suitable for use in systemswhere water is under pressure.Both systems finely atomizespray for rapid evaporation andefficient humidification.
AUTOMATIC SELF-CONTAINED AUTOMATIC
SpraySet-upNo.
SU1A
SU2A
ATOMIZING AIR
SIPHONHEIGHT
LIQUIDCAPACITY
in l/hSpraySet-up
Consists ofFluid and Air Cap
Combination
Fluid Cap1650
+Air Cap
64
Fluid Cap2050
+Air Cap
70
TYPICAL HUMIDIFYING SET-UPS FOR SIPHON NOZZLES
A Float Box with Float ValveB TW Liquid StrainerC Air Atomizing NozzleD Spray Pipe AssemblyE Pipe Hangers
F Air FilterG Pressure Regulator with GaugeH Solenoid ValveI Switching RelayJ Humidistat
ITEM DESCRIPTION
Write for Data Sheet 10188
Write for Data Sheet 2843
HUMIDIFICATION NOZZLES HUMIDIFICATION UNITS
AirPressure
psi
AirCapacity
scfm
2030405060
.59
.76
.951.131.32
2030405060
1.201.571.942.322.70
4" 8" 12"
.34
.39
.41
.42
.44
.31
.37
.38
.39
.41
.28
.35
.36
.37
.39.56.66.76.84.91
.50
.61
.71
.80
.87
.44
.55
.65
.74
.81
Split-Eyelet Connectors providea fast and economical way ofinstalling spray nozzles on amanifold. They provide leak-proof connections up to 250 psi(17 bar) for liquid and gas lines.The connector design reducescosts by eliminating cutting,threading and brazing operations.They are available in a choice of sizes to fit !\¤" to 1" pipe andequivalent size tubing. SeeSections B & G.
Air AtomizingHUMIDIFICATION AND FLUID LINE ACCESSORIES D
27
AIR
AT
OM
IZIN
G
For use in any tank…to shut-offinlet flow at a desired liquid level.Made of brass. The 3161 Valveis 12!\¤" (32 cm) long, has !\¤"NPT or BSPT male inlet connec-tion. The 3266 is 12" (30 cm)long and has a !\°" NPT or BSPTfemale inlet connection. Write forData Sheets 3367 and 11149.
Designed for use with UniJet Split-Eyelet and threaded con-nector bodies, these swivel unionssimplify installation and removalof air atomizing assemblies. Write for Data Sheet 22520.
Equipped with 3161 float valvewith !\¤" NPT or BSPT male inletconnection. Designed with three!\¤" NPT or BSPT female outletsfor connection of feed, drain andoverflow lines. Write for DataSheet 3119.
Will respond to humidity levels in the range of 20% to 80% RH.Maximum operating temperature125°F (52°C). 24V DC; 110V or240V AC. Overall Height 6"(15 cm).
Model 124 Liquid Strainers pro-tect nozzles from clogging andwear. They feature a largestainless steel screen with aglass-reinforced nylon bowl forcorrosion resistance and easymaintenance. They are availablein sizes ranging from #\›" to 2!\¤"and in a variety of materials. SeeSection G.
Liquid Pressure Regulators are arugged diaphragm type design.They can be used with primarysupply line pressures up to 400 psi (28 bar) and can regulatepressure between 5 and 125 psi(0.3 and 8.5 bar). See Section Gfor your specific needs.
3161, 3266float valves
11438-85humidistat
124liquid strainers
22140pressure tank
22520-2swivel union
SPLIT-EYELETconnectors
3119float box assembly
11438--liquid pressure regulators
pg. D22
The Model 22140 Pressure Tankis a high quality tank meeting therequirements of the ASME Boilerand Pressure Vessel Code andmeets OSHA safety regulations.It is constructed of lightweight304 stainless steel with brassfittings. The assembly includes apressure regulator with gauge,ASME coded pressure reliefvalve, air bleed valve, plug valvesfor air inlet and liquid outlet, andan EPR rubber lid seal. The airinlet and liquid outlet have !\›"NPT (F) connections. The maxi-mum working pressure is 140 psiat 100°F (9.5 bar at 38°C). Tanksare available in 1, 2, 5, and 10gallon (3.8, 7.6, 18.9, and 37.8liter capacities). Write for DataSheets 22140 and 36455.
Use on air, oil, gas or water.See Section G.
Air AtomizingHUMIDIFICATION AND FLUID LINE ACCESSORIESD
28
AIR
AT
OM
IZIN
G
Siphon injectors provide aneffective means of siphoning andmetering concentrated chemicalsinto water spray lines. Model23635 has #\°" female inlet and #\°"male outlet connections. Model23636 features #\°" male inlet andoutlet connections constructed ofbrass with stainless steel ball &spring and VITON O-ring. Writefor Data Sheet 23635.
Air Line Filters remove liquid andsolid contaminants from air linesto protect against excessive wearand corrosion. Manual andAutomatic Drain Filter modelsare available with a 50 micronfilter element. See Section G foryour specific needs.
Air Pressure Regulators areavailable in either relieving ornon-relieving designs. They canbe used with primary supply linepressures up to 300 psi (20 bar)and can regulate pressurebetween 5 and 125 psi (0.3 and8.5 bar). See Section G for yourspecific needs.
The Solenoid Valve seriesfeatures normally closed two-wayand three-way valves for “on-off”flow in air and liquid lines.
Two-Way, Two-Way High Flow,Three-Way Quick Exhaust, andThree-Way High Flow modelsare available for a range ofoperating requirements. SeeSection G for your specific needs.
For proper spacing between airand liquid lines. Sizes fit !\¤" pip-ing. Hanger is held by threadedrod and nuts (not included) forvertical adjustment. Made of castaluminum. 4" (10 cm) spacing…use with 2335-SE Spray PipeAssembly.
Consists of straight and formedtubing with fittings, globe valveand Split-eyelet Connectors. Notassembled. (1/4JH Nozzle to beordered separately.) Write forData Sheet 2335-SE.
Has built-in transformer whichsupplies low-voltage current forhumidistat circuit. 2-wire 24Vcontrol. 115V AC. Maximumtemperature 115°F (46°C).
11438-95switching relay
2335-SEspray pipe assembly
11438--solenoid valves
11438--air pressure regulators
26385, 26383pressure gauges
11438--air line filters
2202pipe hanger
23635 + 23636siphon injectors
section
Spray Guns
INDEXAutoJet® (Automatic Spray Guns)
Compact Style...................................................... E2Air Operation Medium Pressure............................E3Air Operation High Pressure................................ E4Electric Operation High Pressure
and Low Pressure............................................ E5
GunJet® Introduction............................................... E6Heavy Duty High Pressure.............................E7, E8Heavy Duty Low Pressure............................ E8, E10Medium Duty Low-Medium Pressure......... E10, E11Light Duty Low Pressure............................E11, E12GunJet Extensions.....................................E13, E14Swivel Connectors..............................................E15High Pressure Strainers..................................... E15Inlet and Outlet Adapters....................................E16
E
E2
SP
RA
Y G
UN
S
1/8JJAUH
AUTOMATIC SPRAY GUNS—AIR OPERATIONCOMPACT STYLE
DESIGN FEATURES
COMMON APPLICATIONS
ORDERING INFORMATION
Cycles/Min.: 180
Pressure: 125 psi (9 bar)
Capacity: 0.3 gpm (1.1 l/min)
1/8JJAUH180
125 psi (9 bar)
0.8 gpm (3 l/min)
1/4JAUH
The 1/8JJAUH is a miniaturizedair actuated automatic spray gun.
It can be used with any UniJetspray tip to provide preciseautomated control of intermittentspraying.
Available in a choice of nickel-plated brass or stainless steel.
Both the air and liquid inlets are!\°" NPT or BSPT (F).
A minimum of 30 psi (2 bar) airpressure is required for operation.Write for Data Sheet 19690.
The 1/4JAUH is a compact airactuated automatic spray gun.
It can be used with any UniJetspray tip to provide precise auto-mated control of intermittentspraying.
Available in a choice of nickel-plated brass or stainless steel.
The liquid inlet connection is !\›"NPT or BSPT (F). The aircylinder inlet connection is !\°"NPT or BSPT (F).
A minimum of 30 psi (2 bar) airpressure is required for operation.Write for Data Sheet 6125.
ⓦ Spray coating
ⓦ Moisturizing
ⓦ Die lubrication
ⓦ Chain lubrication
ⓦ Web spraying
MOISTENINGCOATING BAKERY PRODUCTS PRINTED MATERIAL
COMPLETE COMPACT AUTOJET SPRAY GUN ASSEMBLYAUTOJET ONLY SPRAY TIP
1/8 JJAUH - SS + 000050 - SSInlet Conn.Pipe Size
AutoJetNumber
Material Code
CapacitySize
Material Code
COMPLETE COMPACT AUTOJET SPRAY GUN ASSEMBLYAUTOJET ONLY SPRAY TIP
1/4 JAUH - SS + 8003 - SSInlet Conn.Pipe Size
AutoJetNumber
Material Code
CapacitySize
Material Code
LIQUID INLET1⁄8) NPT or BSPT
female
PLUG
SHUT-OFF NEEDLEhard drawn
stainless steel
RETURN STROKESPRING
stainless steel springfor instantaneous
shut-off.
AIR-OPERATEDCYLINDER
for instantaneousretraction of shut-off
needle to startspraying.
E3
SP
RA
Y G
UN
S
AUTOMATIC SPRAY GUNS—AIR OPERATIONMEDIUM PRESSURE
DESIGN FEATURES
COMMON APPLICATIONS
Cycles/Min.: 180
Pressure: 600 psi (40 bar)
Capacity: 5 gpm (19 l/min)
22AUH
Cycles/Min.: 180
Pressure: 250 psi (17 bar)
Capacity: 2.0 gpm (7.6 l/min)
22AUH-7676
Cycles/Min.: 180
Pressure: 600 psi (40 bar)
Capacity: 5 gpm (19 l/min)
22AUH-SS-11024
180
600 psi (40 bar)
5 gpm (19 l/min)
22AUH-SS
180
800 psi (55 bar)
2 gpm (7.6 l/min)
22AUH-SS-14799
Model 22AUH automatic airactuated spray nozzles providea controlled intermittent liquidspray using only liquid pressureas the force for atomization. Aninternal air cylinder automaticallyinterrupts the liquid flow at any
desired frequency up to 180cycles per minute.
A minimum air pressure of 45 psi (3 bar) is required for theair cylinder. The gun operates at liquid pressures up to 600 psi(40 bar).
Model 22AUH AutoJets featurea !\¤" (12.7 mm) diameter mount-ing hole and locking screw forquick installation and positioningon a mounting bar. They areconstructed of brass with nickel-plated external surfaces. Thevalve seat and packing are madeof TEFLON and the valve stemis made of stainless steel. Avariety of flat spray, hollow cone,
and full cone spray tips areavailable. Write for Data Sheets8605 and 18183.
Model 22AUH-SS AutoJets offer the same performancecharacteristics as the 22AUHand are constructed with an inletbody and cap assembly of stainless steel.
Model 22AUH-SS-11024 offersthe same spray performance asthe standard Model 22AUHAutoJet. Special constructionfeatures two liquid inlets whichallow continuous recirculation ofthe sprayed liquid between thenozzle and the liquid supply.Write for Data Sheet 11115.
Model 22AUH-SS-14799features an additional adjustingscrew which can limit the strokeof the shut-off needle to controlresponse time more precisely.Shortened response time isimportant for accurate spotplacement of the spray pattern.Write for Data Sheet 15343.
Model 22AUH-7676 offers thesame basic design, but isequipped with an extension in achoice of lengths. The stainlesssteel valve stem extends through-out the length of the extension
and the valve seat is directlybehind the spray tip, for instan-taneous, drip-free control. The22AUH-7676 operates at liquidpressures up to 250 psi (17 bar).Write for Data Sheet 8286.METAL COATING
STAINLESS STEELSPRING—closes valve
AIR CYLINDERopens valve
AIR INLETTO AIR CYLINDER
1⁄8) NPT or BSPT, female
LIQUID INLET1⁄4) NPS or BSPP (M)
LOCKING SCREW
STAINLESS STEELVALVE STEM
TEFLON VALVE SEAT
1⁄2) (12.7 mm)DIAMETER
MOUNTING HOLEINTERCHANGEABLEUNIJET TIP
22AUH
LOCKING SCREW
Cycles/Min.: 180
Pressure: 4000 psi (280 bar)
Capacity: 0.6 gpm (2.3 l/min)
Cycles/Min.: 180
Pressure: 4000 psi (280 bar)
Capacity: 0.6 gpm (2.3 l/min)
Cycles/Min.: 180
Pressure: 4000 psi (280 bar)
Capacity: 0.6 gpm (2.3 l/min)
180
3000 psi (210 bar)
0.6 gpm (2.3 l/min)
E4
SP
RA
Y G
UN
S
AUTOMATIC SPRAY GUNS—AIR OPERATIONHIGH PRESSURE
DESIGN FEATURES
ORDERING INFORMATION
24AUA
24AUA-8395
24AUA-8980
24AUA-20190
The 24AUA AutoJet produces afinely atomized intermittent liquidspray using only the liquid pres-sure as the force for atomization.An internal air cylinder automat-ically interrupts the liquid flow atany desired frequency up to 180cycles per minute.
A minimum air pressure of 75psi (5 bar) is required for the air
cylinder, and the gun operatesat liquid pressures up to 4000psi (280 bar).
Note:See pages B22, B23 for infor-mation on tungsten carbide highpressure flat spray tips andpages B24 for hollow cone tips.
Model 24AUA AutoJets featurea !\¤" (12.7 mm) diameter mount-ing hole and locking screw forquick installation and easypositioning on a mounting bar.The shut-off needle and valveseat are available in tungstencarbide or stainless steel. Thevalve seat is located directlybehind the spray tip for drip-freeshut-off. A rear knob locks theshut-off needle in place to preventaccidental discharge whilechanging spray tips. The liquidinlet connection is available inthe standard “down” position orone of seven other positions inintervals of 45°. Write for DataSheets 10751 and 13086.
Model 24AUA-20190 AutoJetsoffer the same basic features asthe standard 24AUA with analuminum support body and endcap which reduce the unit’s totalweight to just 1!\› lbs. (0.6 kg).Model 24AUA-20190 operates atliquid pressures up to 3000 psi(210 bar) and requires a minimumair pressure of 42 psi (3 bar) forthe air cylinder. Write for DataSheet 20190.
Model 24AUA-8395 features twoliquid inlets which allow contin-uous recirculation of the sprayedliquid between the nozzle andthe liquid supply. Other featuresremain the same.
Model 24AUA-8980 offers thesame basic design, but isequipped with an extension in achoice of lengths. The valve stemextends throughout the length ofthe extension and the valve seatis directly behind the spray tip forinstantaneous drip-free control.Write for Data Sheet 15577.
COMPLETE SPRAY GUN ASSEMBLYAUTOJET ONLY SPRAY TIP
AA24AUA-8980-8 + 8001- TCCapacity
SizeMaterial
CodeAutoJet Number Extension
Number orModel Number
(optional)
TUNGSTEN CARBIDENEEDLE SEAT
TUNGSTEN CARBIDENEEDLE STEM
1⁄2) (12.7 mm)DIAMETER
MOUNTING HOLE
STEEL SPRING—closes valve
AIR CYLINDER—opens valve
AIR INLET1⁄8) NPT or BSPT (F)
LIQUID INLET1⁄4) NPS or BSPP (M)
TUNGSTEN CARBIDESPRAY TIP
(See Note Below)
SAFETY LOCKKNOB
24AUA
Extension Extension NetOrder No. Length Weight
8980-8 8" 2Q\ˆ lbs.8980-12 12" 2Q\‰ lbs.8980-18 18" 2E\ˆ lbs.8980-24 24" 2O\ŒÁ lbs.8980-36 36" 2QE\ŒÁ lbs.
E5
SP
RA
Y G
UN
S
AUTOMATIC SPRAY GUNS—ELECTRIC OPERATIONHIGH PRESSURE LOW PRESSURE
Cycles/Min.: 1000
Pressure: 2000 psi (138 bar)
Capacity: 1.1 gpm (4.2 l/min)
26AUH1000
2000 psi (138 bar)
1.1 gpm (4.2 l/min)
26AUH-24200-21⁄22000
air – 125 psi (9 bar)
liquid – 100 psi (7 bar)
25.7 gph (88 l/h)
28JJAU
The 26AUH Electric AutoJethigh speed, high pressure,airless spray gun is for applica-tions requiring an intermittentspray. The liquid pressure aloneprovides an atomized spray. Thegun sprays up to 1000 cyclesper minute. A faster version isalso available which sprays upto 1500 cycles per minute.
The gun operates at liquidpressures to 2000 psi (140 bar).Maximum flow rates to 1.1 gpm(4.2 l/min). A 1⁄2) (12.7 mm) dia.mounting hole and locking screwallows quick installation and/orpositioning. A removable fluidmodule contains all fluid handlingparts and is replaced withoutdisturbing the mounting or electri-cal connections. Wetted partsare made of stainless steel ortungsten carbide for maximumcorrosion resistance. Write forData Sheets 26AUH and 26157-1.
The 26AUH-24200-21⁄2 containsthe same features as the 26AUHAutoJet with the added featureof a 21⁄2) (63.5 mm) extension for interior can coating. Fluidmodule replacement is possiblewithout disturbing the mountingor electrical connections.
Higher flow rates are achievedthrough the straight line liquidflow design. The gun is suppliedwith a mounting block that allowseasy installation. The gun spraysup to 1000 cycles per minute. Afaster version is also availablewhich sprays up to 1500 cyclesper minute. Write for Data Sheets26AUH-24200-2!\¤ and 26156.
Model 1200 timing control ispowered by 115 V or 230 V AC,50 or 60 Hertz, single phase,and is designed for use with 24DC electrically-operated sprayguns. It provides accuratecontrol of the “delay” and “on”times of the spray gun.
An external sensor initiates thecycle, while the user sets thedelay and duration times. Internal thumb wheel switchesindependently control “delay”and “on” times.
Electrical connections are madethrough screw terminal barrierstrips and all control circuitry ismounted on one printed circuitboard. Switches are provided for“Power” and “Auto/Off/Test.”Light emitting diodes indicatepower on, output to gun, andsensor input. Write for DataSheet 1200.
The 28JJAU Compact ElectricAutoJet is a high speed, electri-cally automated, intermittent airatomizing spray gun. The lowpressure gun is primarily usedfor can coating or similarapplications which require amore compact-size spray gun.
For minimum gun profile, allconnections are located at therear of the gun. The mountingand connections are notdisturbed by maintenance, asthe gun’s quick change fluidmodule allows for replacing wearparts with minimum downtime.
All fluid wetted parts are stainlesssteel, carbide, EPDM rubber, ornylon. The gun may be mountedin any position, using a flat bracketor 5⁄16) (7.9 mm) diameter rod.
In line or 45° spray direction fluidmodules are available. The gunsprays up to 2,000 cycles perminute. The gun uses standardJJ spray nozzle set-ups. Maxi-mum fluid orifice is .028) (.71 mm).Write for Data Sheet 28JJAU.
ACCESSORIES
DESIGN FEATURES
DESIGN FEATURES DESIGN FEATURES
ORDERING INFORMATION
AA 26AUH - 24200AutoJetNumber
ModelNumber
Model 22629Swivel Nut Branch Tee
The model 22629-SS swivel nutbranch tee may be used with the26AUH-24200 to provide liquidrecirculation. It is constructed ofstainless steel and has a maxi-mum operating pressure of 2000psi (138 bar).
Model 22629-SS features inletand outlet 1⁄2-20 J.I.C. maleconnections for 37° flared tubing.Write for Data Sheet 22629.
LIQUID INLET1⁄4) NPS OR
BSPP (M)
26AUH
TIP RETAINER
TUNGSTEN CARBIDESHUT-OFF BALL
1⁄2)/12.7mm DIAMETERMOUNTING HOLE
LOCKING SCREW
STAINLESS STEELRETURN SPRING
FLUIDMODULERETAINER
NUT
CONDUITCONNECTION
STAINLESS STEELSHUT-OFF PLUNGER COIL
ASSEMBLY
TUNGSTEN CARBIDESHUT-OFF SEAT
Model 1200Timing Control
E6
SP
RA
Y G
UN
S
INTRODUCTION
SPRAY GUNS
DESIGN FEATURESGunJet spray guns are availablein many different designs, fromhigh pressure models used incar washing to low pressuremodels used for washing produce.
A complete line of accessories is available to complement allGunJet spray gun models.
GunJets are available with achoice of extension lengths toimprove the efficiency of yourspraying operation.
Swivel connectors prevent hosetwisting when using spray guns,increasing hose life and reducingoperator fatigue.
Strainers are available forGunJets in a choice of screenmesh sizes and materials.
GunJets are designed for usewith UniJet spray tip assemblies,available in a wide selection ofspray patterns and flow capacities.
Adapters for GunJets convert thegun outlet from !!\⁄fl"-16 UniJetthread to a choice of outletconnection sizes, allowing theattachment of other accessories.
Standard one piece spray noz-zles such as VeeJet flat spraynozzles can be used withGunJets in conjunction withproper adapters.
Trigger valve type spray gunsare suitable for use at lowerpressures and smaller capacities.Trigger valve guns are alsoavailable with extensions andmost GunJet accessories.
SPRAY TIP OR
NOZZLEADAPTER
E16EXTENSION
E13-E14SWIVELE15SPRAY GUN
E7-E12
SEECATALOG
SECTION CFULL CONE,FLAT SPRAY
& FINE SPRAY
Pressure: 1500 psi (105 bar)
Capacity: 5 gpm (19 l/min)
Temperature: 200°F (93°C)
2500 psi (175 bar)
6 gpm (23 l/min)
300°F (150°C)
3000 psi (210 bar)
10 gpm (38 l/min)
300°F (150°C)
1500 psi (105 bar)
10 gpm (38 l/min)
300°F (150°C)
E7
SP
RA
Y G
UN
S
HEAVY DUTYHIGH PRESSURE
30 60 80
Length: 8) (20.32 cm)
Width: 11⁄8) (2.86 cm)
Height: 69⁄16) (16.67 cm)
Weight: 15 oz. (.43 kg)
83⁄4) (22.23 cm)
17⁄16) (3.65 cm)
61⁄2) (16.51 cm)
1 lb. (.45 kg)
83⁄8) (21.3 cm)
11⁄4) (3.18 cm)
73⁄4) (19.69 cm)
1.5 lbs. (.68 kg)
9) (22.86 cm)
15⁄8) (4.13 cm)
67⁄8) (17.46 cm)
2.25 lbs. (1.02 kg)
CW1500A
The Model 30 GunJet is a heavy-duty impact-resistant spray gunwith a sturdy nylon handle andtrigger guard. The 30 gun is ahigh pressure gun which remainsresponsive and easy to operateeven at maximum flow andpressure conditions. The lighttrigger pull provides positivecontrol. The heat-resistanthandle remains comfortableeven at high temperatures. Aspecial trigger lock feature locksin the “off” position to preventaccidental discharge and retractsflush into the handle when thegun is in use.
Model 30 GunJets operate atpressures up to 1500 psi (105bar) and provide flow rates up to 5 gpm (19 l/min). Liquidtemperatures up to 200°F (93°C)can be handled. The 30 gun has a 1⁄4) NPT or BSPT (F) inletconnection.
Model 30 spray guns feature aBuna-N stem seal, a TEFLONvalve seat, and a stainless shut-off needle. The valve body isforged brass. Model 30W is sup-plied with a special “weep” featurewhich helps prevent freezing.
11⁄16)-16 THD outlet. Use withUniJet spray tips. Write for DataSheet 19830.
The new CW1500A GunJetspray gun is specifically designedfor car wash applications.
Equipped with high-impact nylonhandles, a forged brass body,stainless steel working parts andVITON O-rings, the CW1500GunJet is able to withstand themost demanding environments.
It is capable of delivering flowrates up to 10 gpm (38 l/min),temperatures to 300°F (150°C),and pressures to 1500 psi (105bar). Inlet/outlet connections areavailable with !\›" and #\°" NPT orBSPT thread.
A bottom trigger pivot reduceshand fatigue and the gun’soverall weight is just 1.5 lbs (680 g). An optional weepfeature option prevents freezingin cold weather.
Interchangeable spray nozzlescan be connected to the outletorifice, providing different flowrates and enabling water savingadjustments.
The Model 60 GunJet is a heavy-duty impact-resistant spray gunwith a sturdy nylon handle andtrigger guard. The 60 gun is a high pressure gun which remainsresponsive and easy to operateeven at maximum flow andpressure conditions. The lighttrigger pull provides positivecontrol. The heat-resistant handleremains comfortable even at hightemperatures. A special triggerlock feature locks in the “off”position to prevent accidentaldischarge and retracts flush intothe handle when the gun is in use.
Model 60 GunJets operate atpressures up to 2500 psi (175bar) and provide flow rates up to6 gpm (23 l/min). Liquid temper-atures up to 300°F (150°C) canbe handled. The 60 gun has a3⁄8) NPT or BSPT (F) inletconnection.
Model 60 spray guns feature aVITON stem seal and a stainlesssteel shut-off needle. The valvebody is forged brass or stainlesssteel. Model 60W is supplied witha special “weep” feature whichhelps prevent freezing.
11⁄16)-16 THD outlet. Use withUniJet spray tips. Write for DataSheet 18208.
The Model 80 GunJet is aheavy-duty impact-resistantspray gun with a sturdy nylonhandle and trigger guard. The 80 gun is a high pressure gunwhich remains responsive andeasy to operate even atmaximum flow and pressureconditions. The light trigger pullprovides positive control. Theheat-resistant handle remainscomfortable even at hightemperatures. A special triggerlock feature locks in the “off”position to prevent accidentalgun discharge.
Model 80 GunJets operate atpressures up to 3000 psi (210bar) and provide flow rates up to 10 gpm (38 l/min). Liquidtemperatures up to 300°F (150°C)can be handled. The 80 gun has a 3⁄8) NPT or BSPT (F) inletconnection.
Model 80 spray guns feature a VITON stem seal and astainless steel shut-off needle.The valve body is forged brass.Model 80W is supplied with aspecial “weep” feature whichhelps prevent freezing.
11⁄16)-16 THD outlet. Use withUniJet spray tips. Alsoavailable with 1⁄4) or 3⁄8) NPT orBSPT (F) outlet. Write for DataSheet 17734.
SPRAY GUNS
AA 60 - 3/8GunJetNumber
Inlet size
DIMENSIONS & WEIGHTS
ORDERING INFORMATION
150 psi (10 bar)
5 gpm (19 l/min)
120°F (50°C)
250 psi (17 bar)
5 gpm (19 l/min)
200°F (93°C)
Pressure: 4000 psi (275 bar)
Capacity: 10 gpm (38 l/min)
Temperature: 300°F (150°C)
4000 psi (275 bar)
10 gpm (38 l/min)
300°F (150°C)
E8
SP
RA
Y G
UN
S
HEAVY DUTYLOW PRESSURE
HEAVY DUTYHIGH PRESSURE (CONT.)
SPRAY GUNS
30L-PP30L
The Model 30L-PP GunJetoffers the same basic design asthe 30L gun but is constructedof polypropylene for excellentcorrosion resistance. The lighttrigger pull provides positivecontrol. A special trigger lockfeature locks in the “off” positionto prevent accidental dischargeand retracts flush into thehandle when the gun is in use.
Model 30L-PP GunJets operateat pressures up to 150 psi (10bar) and provide flow rates up to5 gpm (19 l/min). Liquid tempera-tures up to 120°F (50°C) can behandled. 30L-PP has a 1⁄4) NPTor BSPT (F) inlet connection.
Use with UniJet spray tips.Write for Data Sheet 30L-PP.
The Model 30L GunJet is aheavy-duty, impact-resistantspray gun with a sturdy nylonhandle and trigger guard. The30L gun remains responsiveand easy to operate even atmaximum flow and pressureconditions. The light trigger pullprovides positive control. Theheat-resistant handle remainscomfortable even at hightemperatures. A special triggerlock feature locks in the “off”position to prevent accidentaldischarge and retracts flush intothe handle when the gun is in use.
Model 30L GunJets operate atpressures up to 250 psi (17 bar)and provide flow rates up to 5gpm (19 l/min). Liquid tempera-tures up to 200°F (93°C) can behandled. The 30L gun has a 1⁄4)NPT or BSPT (F) inlet connection.
Model 30L spray guns feature a Buna-N stem seal, a TEFLONvalve seat, and a stainless steelshut-off needle. The valve bodyis forged brass.
11⁄16)-16 THD outlet. Use withUniJet spray tips. Write for DataSheet 30L.
8) (20.32 cm)
11⁄8) (2.86 cm)
6 9⁄16) (16.67 cm)
15 oz. (.43 kg)
83⁄4) (22.23 cm)
11⁄4) (3.18 cm)
73⁄4) (19.69 cm)
24 oz. (.68 kg)
8 ) (20.32 cm)
11⁄8) (2.86 cm)
6 9⁄16) (16.67 cm)
9 oz. (.25 kg)
AA 30L - PPGunJetNumber
MaterialCode
DIMENSIONS & WEIGHTS
ORDERING INFORMATION
Length: 83⁄4) (22.23 cm)
Width: 11⁄4) (3.18 cm)
Height: 73⁄4) (19.69 cm)
Weight: 24 oz. (.68 kg)
PW4000A PW4000AS
The Model PW4000A GunJet isa durable high pressure spraygun that offers exceptionaloperator comfort and control,even at maximum flow andpressure conditions. Its uniquetrigger design reduces handfatigue by making trigger pulleasier with better leverage thanother similar guns. A trigger locklocks in the “off” position toprevent accidental gun discharge.
The PW4000A operates atpressures up to 4000 psi (275bar) and provides flow rates upto 10 gpm (38 l/min). Liquidtemperatures up to 300°F (150°C)can be handled. 1⁄4) and 3⁄8) NPTand BSPT inlet and outletconnections are available.
Model PW4000A GunJetfeatures durable impact-resistantnylon handles, VITON stemseals, and a forged brass valvebody with stainless steel workingparts. An optional “weep” featurehelps prevent freezing. Write forData Sheet PW4000A.
The PW4000AS GunJet spraygun combines high pressurespray capabilities with operatorcomfort and control. The gun’sbottom trigger pivot reduceshand fatigue and the inlet swiveleliminates hose twisting.
The PW4000AS operates atpressures up to 4000 psi (275bar), provides flow rates to 10 gpm (38 l/min) and handlestemperatures to 300°F (150°C).#\°" inlet and !\›" or #\°" outletavailable in NPT or BSPT connections. By changing spraynozzles, a range of flow rates can be used.
The PW4000AS GunJet spraygun features impact-resistantnylon handles, VITON O-ringsand a forged brass valve bodywith stainless steel workingparts. For safety, a trigger lockprevents accidental gundischarge when not in use. Anoptional “weep” feature helpsprevent freezing. Write for DataSheet PW4000AS.
250 psi (20 bar)
5 gpm (19 l/min)
200°F (93°C)
250 psi (17 bar)
10 gpm (38 l/min)
300°F (150°C)
Pressure: 75 psi (5.2 bar)
Capacity: 1 to 16 ml dosage range
Temperature: 200°F (93°C)
250 psi (17 bar)
16 gpm (60 l/min)
300°F (150°C)
83⁄16) (20.80 cm)
11⁄8) (2.86 cm)
6 9⁄16) (16.67 cm)
12 oz. (.34 kg)
E9
SP
RA
Y G
UN
S
SPRAY GUNS
The Model 30L-26323 GunJetspray gun offers the same basicdesign as the 30L gun butprovides a liquid outlet that usesSpraying Systems’ Quick UniJetcaps, seat gaskets andinterchangeable spray tips.
The gun is corrosion-resistant as wetted parts are made ofTEFLON and stainless steel,with VITON seals. The lighttrigger pull provides positivecontrol. A trigger lock preventsaccidental discharge as it canlock in the “off ” position. Whenthe gun is in use, the trigger lockretracts flush into the handle.
Model 30L-26323 GunJetoperates at pressures up to 250psi (17 bar) and provides flowrates to 5 gpm (19 l/min). Liquidtemperatures to 200°F (93°C).Liquid connections of 1⁄4) NPT orBSPT (F) are available. Write forData Sheet 26323.
HEAVY DUTYLOW PRESSURE (CONT.)
30L-26323
77⁄8) (20 cm)
11⁄8) (2.86 cm)
69⁄16) (16.67 cm)
13 oz. (0.37 kg)
AA 30 - 20940GunJetNumber
Special ModelNumber
(Optional)or
Inlet size
DIMENSIONS & WEIGHTS
ORDERING INFORMATION
30-2094023624-30L
The Model 23624-30L-1⁄4MeterJet
®Spray Gun is
designed to deliver a preciselymetered volume of spraysolution for low pressure spotapplications of chemicals. Theadjustable metering assemblyallows the applicator todischarge precise volumes from1 to 16 milliliters with a singlepull of the trigger. Release ofthe trigger automaticallyrecharges the unit for the nextdosage.
Model 23624-30L MeterJet SprayGun has a maximum operatingpressure of 75 psi (5.2 bar) andminimum pressure of 25 psi (1.7bar) to charge unit. Inlet con-nection available in 1⁄4) NPT orBSPT (F). The MeterJet SprayGun will accept all UniJet spraytips for many types of applications.
The Model 60-21580 GunJetoffers the same basic designand heavy-duty construction asthe 60 gun. The gun alsofeatures a variable spray patternwhich is adjustable from a finemist to a full cone and solidstream by pulling back on thetrigger. The gun operates atlower pressures to 250 psi (17 bar) with flow rates to 16 gpm(60 l/min). Liquid temperaturesup to 300°F (150°C). Inletconnection in 3⁄8) NPT or BSPT(F). Write for Data Sheet 21580.
The Model 30-20940 GunJetoffers the same basic design asthe 30L gun. Additionally, the gunfeatures a variable spray patternthat adjusts from a fine mist to afull cone and solid stream patternby pulling back on the trigger.The gun operates at pressuresup to 250 psi (17 bar) andprovides flow rates up to 10 gpm(38 l/min). Liquid temperaturesup to 300°F (150°C). Inletconnection in 1⁄4) NPT or BSPT(F). Write for Data Sheet 20940.
Length: 97⁄8) (25.08 cm)
Width: 25⁄16) (5.35 cm)
Height: 69⁄16) (16.67 cm)
Weight: 1.5 lbs. (.68 kg)
9) (22.86 cm)
17⁄16) (3.65 cm)
61⁄2) (16.51 cm)
1.2 lbs. (.55 kg)
60-21580
250 psi (17 bar)
5 gpm (19 l/min)
200°F (93°C)
200 psi (14 bar)
15 gpm (57 l/min)
200°F (93°C)
Pressure: 150 psi (10 bar)Capacity: 10 gpm (38 l/min)Temperature: 200°F (93°C)
1000 psi (70 bar)
5 gpm (19 l/min)
200°F (93°C)
6) (15.24 cm)
11⁄16) (2.70 cm)
71⁄4) (18.42 cm)
15 oz. (.43 kg)
E10
SP
RA
Y G
UN
SSPRAY GUNS
Designed for clean-up applica-tions, the CU150’s trigger andhandle are engineered for reducedoperator fatigue.
Changeable spray caps comewith 10 gpm and 16 gpm capac-ities (38 and 61 l/min). Detachablecolor bands identify flow rates—yellow (10 gpm, 38 l/min) or red(16 gpm, 61 l/min). The colorband also helps identify thespraying end, for safer operation.Spray adjusts from solid streamto a 50° hollow cone pattern.
The CU150 is available in brassor lightweight aluminum bodyconstruction…both, corrosion-resistant. A rubber outer cover,available in black or white, pro-tects against liquid temperaturesto 200°F (93°C). 1⁄2) NPT orBSPT (F) inlet connection. Writefor Data Sheet CU150.
Optional repair kits, replaceablerubber body covers, and swivelconnectors are available. Theswivel connectors come witheither hose shank or garden hoseconnection and provide a lock-ring that secures the trigger inthe solid stream spraying position.Write for Data Sheet 36467.
Optional swivel connector No.11990-19 is also available with !\¤"NPT or BSPT (MxF).
The 23L GunJet features astrong aluminum alloy handlewith a comfortable trigger grip. A trigger guard helps preventaccidental discharge. 23L gunsare specially designed so thatonly the inlet body, tip retainer,and orifice tip touch the liquidsprayed.
Model 23L GunJet spray gunsoperate at pressures up to 250psi (17 bar) and provide flow ratesup to 5 gpm (19 l/min). Liquidtemperatures to 200°F (93°C)can be tolerated. The gun has a!\›" NPS (M) inlet connection.Write for Data Sheet 16852.
Standard 23L GunJet sprayguns offer a nickel-plated inletbody and tip retainer, a TEFLONvalve seat and a stainless steelstem with brass guide. Model23L-SS features a stainless steelinlet body and tip retainer and isideal for spraying corrosive liquid.
!!\⁄fl"-16 THD outlet. Use withUniJet spray tips.
The 23H high pressure GunJetfeatures a strong aluminum alloyhandle with a comfortable triggergrip. A trigger guard helps preventaccidental discharge. 23H gunsare designed so that only theinlet body, tip retainer, and orificetip touch the sprayed liquid.
Model 23H GunJet spray gunsoperate at pressures from 250 to 1000 psi (17 to 70 bar) andprovide flow rates up to 5 gpm(19 l/min). Liquid temperaturesup to 200°F (93°C) can betolerated. The 23H gun has a !\›" NPS (M) inlet connection.Write for Data Sheet 16010.
Standard 23H GunJet spray gunsoffer a nickel-plated inlet bodyand tip retainer, a TEFLON valveseat and a stainless steel stemwith brass guide. Model 23H-SSfeatures a stainless steel inletbody and tip retainer and is idealfor spraying corrosive liquids.
!!\⁄fl"-16 THD outlet. Use withUniJet spray tips.
HEAVY DUTYLOW PRESSURE (CONT.)
MEDIUM DUTYLOW-MEDIUMPRESSURE
23L 43LDCU150 23H
Length: 61⁄2) (16.5 cm)
Width: 21⁄4) (5.7 cm)
Height: 61⁄2) (16.5 cm)
Weight: 36 oz. (1 kg), Brass
22 oz. (.62 kg), Aluminum
6) (15.24 cm)
11⁄16) (2.70 cm)
71⁄4) (18.42 cm)
1 lb. (.45 kg)
8) (20.32 cm)
13⁄8) (3.50 cm)
83⁄8) (21.27 cm)
1.5 lbs. (.68 kg)
AA 23L - SSGunJetNumber
MaterialCode
DIMENSIONS & WEIGHTS
ORDERING INFORMATION
The 43LD GunJet features astrong aluminum alloy handlewith a comfortable trigger grip.A trigger guard helps preventaccidental discharge. A specialtrigger lock feature locks the gunin any “on” position for easycontinuous operation.
Model 43LD GunJet spray gunsoperate at pressures up to 200psi (14 bar) and provide flowrates up to 15 gpm (57 l/min).Liquid temperatures up to 200°F(93°C) can be tolerated. The43LD gun has !\¤" NPT or BSPT(F) inlet connection.
Standard 43LD guns offer abrass inlet body and tip retainer,a nylon valve seat, and a stain-less steel stem with a brass guide.
!!\⁄fl"-16 THD outlet. Use withUniJet spray tips.
800 psi (56 bar)
15 gpm (57 l/min)
200°F (93°C)
800 psi (56 bar)
15 gpm (57 l/min)
200°F (93°C)
500 psi (35 bar)
5 gpm (19 l/min)
200 psi (14 bar)
15 gpm (57 l/min)
200°F (93°C)
9) (22.86 cm)
13⁄8) (3.50 cm)
83⁄8) (21.27 cm)
1.5 lbs. (.68 kg)
E11
SP
RA
Y G
UN
S
SPRAY GUNS
MEDIUM DUTYLOW-MEDIUM PRESSURE
AA 31GunJetNumber
DIMENSIONS & WEIGHTS
ORDERING INFORMATION
Length: 8) (20.32 cm)Width: 13⁄8) (3.50 cm)Height: 83⁄8) (21.27 cm)Weight: 1.5 lbs. (.68 kg)
The Model 31 GunJet features a durable brass-forged body anda comfortable palm-fitting handgrip. Instantaneous positivetrigger action provides immediatedrip-free shut-off. An optionaltrigger lock is available for easycontinuous spraying.
Model 31 GunJets operate atpressures up to 500 psi (35 bar)and provides flow rates up to 5 gpm (19 l/min). The 31 gunhas a 1⁄4) NPS (M) inlet connec-tion and weighs just 12 oz. (0.34 kg). A 1⁄4) NPT or BSPT (F)inlet connection is available byordering the 31-1/4F GunJet.
Model 31 GunJets offer a nickel-plated steel trigger and a stainlesssteel valve stem. The valve seatand packing are made of TEFLON.
11⁄16)-16 THD outlet. Use withUniJet spray tips. Write for DataSheet 9079.
LIGHT DUTYLOW PRESSURE
31
The 43LC GunJet features astrong aluminum alloy handlewith a comfortable trigger grip. A trigger guard helps preventaccidental discharge. A specialtrigger lock feature locks the gunin any “on” position for easycontinuous operation.
Model 43LC GunJet operates atpressures up to 200 psi (14 bar)and provides flow rates up to 15 gpm (57 l/min). Liquid temper-atures up to 200°F (93°C) can betolerated. The 43LC gun has !\¤"NPT or BSPT (F) inlet connection.
Standard 43LC GunJet sprayguns offer a brass inlet body andtip retainer, a nylon valve seat,and a stainless steel stem with abrass guide.
Model 43LC-1/2 has a !\¤" NPTor BSPT (F) outlet connection.
Model 43LC-3/4 has a #\›" NPTor BSPT (F) outlet connection.
43LC
The 43HD high pressure GunJetfeatures a strong aluminum alloyhandle with a comfortable triggergrip. A trigger guard helpsprevent accidental discharge. Aspecial trigger lock feature locksthe gun in any “on” position foreasy continuous operation.
Model 43HD GunJet operates atpressures from 200 to 800 psi(14 to 56 bar) and provides flowrates up to 15 gpm (57 l/min).Liquid temperatures up to 200°F(93°C) can be tolerated. The43HD gun has !\¤" NPT or BSPT(F) inlet connection.
Standard 43HD GunJet sprayguns offer a brass inlet body andtip retainer, a nylon valve seat,and a stainless steel stem with abrass guide.
!!\⁄fl"-16 THD outlet. Use withUniJet spray tips.
43HD
The 43HC high pressure GunJetfeatures a strong aluminum alloyhandle with a comfortable triggergrip. A trigger guard helpsprevent accidental discharge. Aspecial trigger lock feature locksthe gun in any “on” position foreasy continuous operation.
Model 43HC GunJet operates atpressures from 200 to 800 psi(14 to 56 bar) and provides flowrates up to 15 gpm (57 l/min).Liquid temperatures up to 200°F(93°C) can be tolerated. The43HC gun has !\¤" NPT or BSPT(F) inlet connection.
Standard 43HC GunJet sprayguns offer a brass inlet body andtip retainer, a nylon valve seat,and a stainless steel stem with abrass guide.
Model 43HC-1/2 has a !\¤" NPTor BSPT (F) outlet connection.
Model 43HC-3/4 has a #\›" NPTor BSPT (F) outlet connection.
43HC
51⁄2) (13.97 cm)
11⁄16) (2.70 cm)
31⁄4) (8.26 cm)
12 oz. (.34 kg)
9) (22.86 cm)
13⁄8) (3.50 cm)
83⁄8) (21.27 cm)
1.5 lbs. (.68 kg)
E12
SP
RA
Y G
UN
S
MeterJet®
Pressure: 75 psi (5.2 bar)
Capacity: 1 - 16 ml
TriggerJet®
150 psi (10 bar)
2 gpm (7.6 l/min)
Trigger Valve150 psi (10 bar)
7 gpm (27 l/min)
Trigger Valve250 psi (17 bar)
2 gpm (7.6 l/min)
ACCESSORIES
ACCESSORIES
61043623623-31-1⁄4F 22650-PP
Trigger Valve
Pressure: 250 psi (17 bar)
Capacity: 2 gpm (7.6 l/min)
Trigger Valve250 psi (17 bar)
2 gpm (7.6 l/min)
4688 6466
Trigger Valve
Pressure: 250 psi (17 bar)
Capacity: 2 gpm (7.6 l/min)
6590
The Model 23623-31-!\›FMeterJet gun assembly is aprecision liquid delivery devicewhich discharges accuratedosages within a range of 1 to 16milliliters with a single pull of theMeterJet trigger. Release of thetrigger automatically rechargesthe unit ready for the nextdosage. Maximum operatingpressure is 75 psi (5.2 bar).Minimum pressure needed tocharge unit is 25 psi (1.7 bar).The unit accepts all UniJet spraytips for many types of application.
Model 23623L-31-!\›F MeterJetoffers the same basic design asthe 23623-31-!\›F but has areduced minimum charging pressure of 20 psi (1.4 bar) forlow dosage applications. Both models are supplied with a !\›"NPT or BSPT (F) inlet connec-tion with a !\›" NPS (M) inletconnection optional. Write forData Sheet 23623.
The Model 22650-PP TriggerJethand-operated spray gun ismade of molded polypropylenefor excellent corrosion resistance.It is lightweight and designed forcomfort and ease of operation.The trigger lock permits lockingthe valve in the open position forcontinuous flow of liquid.
The Model 22650-PP TriggerJetcan be supplied with an optionalUniJet strainer assembly toprevent clogging of the orifice.The valve diaphragm is made ofdurable VITON. The TriggerJetoffers a choice of inlet connectionsto fit !\›" or #\°" hose I.D. or a !\›" NPT or BSPT (F) inletconnection. Maximum operatingpressure is 150 psi (10 bar).Write for Data Sheet 22650-1.
For TriggerJet Spray Gun
Several accessory items areavailable for the Model 22650-PPTriggerJet spray gun. Theseinclude extensions in 15"(381 mm) or 24" (610 mm)lengths (part no. 22665-PP), a 45°adapter (part no. 22673-PPB), a straight adapter (part no.22664-PPB), an adjustableConeJet® spray tip (part no.5500-PPB-X8) and UniJetstrainer (part no. 8079-50-PP).
Model 4754 features a rubbercovered handle with a #\›"garden hose thread connection.
Model 5820 features an internalstrainer in a choice of mesh sizesand a !\›" NPT or BSPT (F)connection.
Model 4727 features a rubbercovered handle with a !\›" NPS(M) hose inlet connection.
Model 4725 features a !\°" brasspipe handle. #\°" ID hose slipseasily over the pipe handle.
Trigger Valve Inlet Handles
The Model 36 trigger valve is acompact, general purpose, quick-acting on-off valve. The 36 valvecan be used with a choice of inlethandles for use as a light-dutyspray gun. It can be used in a widevariety of applications at pres-sures up to 150 psi (10 bar) andflow rates up to 7 gpm (27 l/min).
The Model 36 trigger valve spray gun features lightweightconstruction of brass or stainlesssteel for durability and corrosionresistance. The valve seat isnylon with a VITON packing. Thetrigger lock feature is ideal forapplications where continuousoperation is necessary. Write forData Sheet 17050.
Model 4688 trigger valve gunsoffer a !\›" NPT or BSPT (F) inletconnection and an !!\⁄fl"-16 outletconnection. A trigger lock featureallows easy continuous spraying.Write for Data Sheet 20876.
Model 6104 trigger valve gunsoffer !\›" NPT or BSPT (F) inletsand outlets. Continuous sprayingis easy with the locking trigger.
Model 6466 guns offer the samebasic design as the 4688 gun withan extra long trigger. No triggerlock is available on this gun.
Model 6590 guns have the samebasic design as the 6104 gunwith an extra long trigger andwithout the trigger lock.
Inlet handles are designed witha !\›" NPT or BSPT (M) connec-tion for use with trigger valvespray gun Models 36, 4688,6466, 6104, and 6590. Variousdesigns are available for use inmany applications.
Write for DataSheet 6104.
Write for DataSheet 6496.
Write for DataSheet 6590.
SPRAY GUNSLIGHT DUTYLOW PRESSURE (CONT.)
1⁄4) or 3⁄8) NPTor BSPT (F)inlet/outletconn.
AA 22650 - PPMaterial
CodeGunJetNumber
ORDERING INFORMATION
AA23L-7676-*AA23L-SS-7676-*-SSAA30L-22425-*AA31-12090-*
• • • • •• • • • •• • • • •• • • • •
•••
•
GunJet plus Extension
Order Number
Extension Length
8" 18" 24" 36" 48"(203mm) (457mm) (610mm) (914mm) (1219mm)
E13
SP
RA
Y G
UN
S
Model 9004-SS is a high pressurestainless steel extension assem-bly with !!\⁄fl"-16 UniJet threadinlet and outlet connections.
Model 11806 is a high pressureextension assembly with !!\⁄fl"-16UniJet thread inlet and outletconnections and a !\›" NPS (M)liquid recirculating connection. Itis available only in brass exceptfor the 8" model which is alsoavailable in stainless steel.
Model 15250 is a high pressureextension assembly with #\°"NPT or BSPT (M) inlet end !!\⁄fl"-16 UniJet thread outlet connec-tions. It is available in stainlesssteel and zinc-plated steel and issupplied with an adjustable handgrip for easy gun control.
Model 20400 is a high pressureextension assembly with a !\›"NPT or BSPT (M) inlet and a !\›"NPT or BSPT (M) or !\°" NPT orBSPT (F) outlet connection. It isavailable in stainless steel orzinc-plated steel.
Model 13781 is a high pressureextension usually supplied with a7890 cap with !!\⁄fl"-16 UniJetthread inlet connection and a13783 hollow cone spray tip.Cap and spray tip must beordered separately.
Model 9702S is a straight highpressure extension usuallysupplied with a 7890 cap with an!!\⁄fl"-16 UniJet thread inlet con-nection and a tungsten carbidespray tip. The extension body isconstructed of black oxide-coated steel. Cap and spray tipmust be ordered separately.
Model 9702A offers the samedesign as the 9702S extensionwith a tip that projects a spraypattern at a 90° angle to theextension body.
Model 9702C offers the samedesign as the 9702S extensionwith a curved extension body.
Model 15699 is a high pressureextension assembly with !!\⁄fl"-16UniJet thread inlet and outletconnections. It features brassconstruction and a rubberinsulated body.
Model 9527 is a high pressureextension assembly with !!\⁄fl"-16UniJet thread inlet and outletconnections and a curved body.It is constructed of brass with arubber insulated body.
Model CP12087 is a highpressure aluminum extensionwith !\›" NPT or BSPT (M) inletand outlet connections.
Model 12086 is a high pressureextension assembly with !!\⁄fl"-16UniJet thread inlet and outlet con-nections. It is constructed of brass.
Model 7715 is a medium pres-sure extension assembly with!!\⁄fl"-16 UniJet thread inlet andoutlet connections. It is availablein stainless steel and brass.
Model 14975 is a medium pres-sure extension assembly with an!!\⁄fl"-16 UniJet thread inlet and!\°" NPT or BSPT (M) outlet con-nection. Construction is of brass.
Model 6671 is a medium pres-sure extension assembly with acurved body and !!\⁄fl"-16 UniJetthread inlet and outlet connec-tions. Construction is of brass.
Model 4673 is a low pressurecurved extension assembly witha swivel nozzle body. Inlet andoutlet connections are !!\⁄fl"-16UniJet thread and the unit is brass.
Model 6960 is a low pressureextension assembly which featuresa siphon attachment with adjustableliquid flow. The assembly includesa spray tip and is constructed ofbrass. The inlet connection is !!\⁄fl"-16 UniJet thread.
Model 22665 is a mediumpressure extension assembly with!!\⁄fl"-16 (F) UniJet® thread inlet andoutlet connections. Extension tubemade of polyester, polypropyleneadapters and caps, with EPDMO-rings.
WITH FRONT SHUT-OFF EXTENSIONS
EXTENSIONS
SPRAY GUNS
Model 23L-7676 GunJets offerall the features of the standard23L GunJets with the addition of a brass or stainless steelextension in a variety of lengths.
The extension features a valveseat which is located directlybehind the spray tip for instanta-neous drip-free shut-off. Writefor Data Sheet 7676.
Model 31-12090 GunJets offerthe same features as thestandard 31 GunJets with anadditional extension in a choiceof lengths. The stainless steelvalve stem extends the full
length of the extension, locatingthe valve seat directly behind thespray tip for immediate andpositive shut-off. Write for DataSheet 12092.
Model 30L-22425 GunJets featurethe same basic design andperformance as standard 30LGunJets. In addition, 30L-22425GunJets feature a brass tubing
extension in a variety of lengths.Drip-free shut-off is provided bythe valve stem which extendsthe full length of the extension.Write for Data Sheet 30L-22425.
*extension length (in inches)
no material = Brass
SS = 303 Stainless Steel
IZP = Zinc-plated Steel
AL = Aluminum
I = Iron
7715 - 18 - SSExtensionNumber
MaterialCode
ExtensionLength
(in inches)
MATERIAL CODES
ORDERING INFORMATION
Extension Material
Brass Stainless Steel
E14
SP
RA
Y G
UN
SEXTENSIONS (CONT.)
22AU
H24
AUA
30 60 80 23 43LD
43-1
1767
-1 ⁄443
-117
67-3 ⁄8
43-1
2605
31 36-1 ⁄4
4688
6466
6104
6590
2265
0
8) / 20312) / 305 SS (acero)9004 18) / 457 280 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ24) / 610 inoxidable)
36) / 914
8) / 20312) / 305
11806 18) / 457 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ24) / 610
280
36) / 914
18) / 457 IZP ⓦ ⓦ15250 36) / 914 SS 210
18) / 457 IZP t t ⓦ ⓦ ⓦ ⓦ ⓦ20400-1⁄4M 36) / 914 SS 210
18) / 457 IZP t t ⓦ ⓦ ⓦ ⓦ ⓦ20400-1⁄8F 36) / 914 SS 210
10) / 25413781S 16) / 406 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
48) / 1219135
10) / 25424) / 610 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ9702S 48) / 1219 135
60) / 1524
10) / 25424) / 610 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ9702A 48) / 1219 135
60) / 1524
10) / 25424) / 610 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ9702C 48) / 1219 135
60) / 1524
8) / 20318) / 457
15699 24) / 610 70 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ36) / 91448) / 1219
8) / 20318) / 457
9527 24) / 610 70 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ36) / 91448) / 1219
8) / 20318) / 457 ⓦ ⓦ ⓦ ⓦCP12087 24) / 610 70
36) / 914
8) / 20318) / 457 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ12086 24) / 610 70
36) / 914
8) / 20312) / 305 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ18) / 457
7715 24) / 61030) / 762 SS36) / 914 8, 18, 35 ⓦ ⓦ ⓦ ⓦ48) / 1219 24, 36
8) / 20318) / 45724) / 610 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ6671 30) / 762 8
36) / 91448) / 1219
8) / 20318) / 45724) / 610
4673 30) / 762 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ36) / 914
8
48) / 121972) / 1828
6960 81⁄2 )/ 216 7 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ14975 18) / 457 17 ⓦ ⓦ ⓦ ⓦ ⓦ ⓦ
15) / 381 ⓦ22665 24) / 61010
ExtensionNo.
LengthAvailable
inches/mm
MaterialAvailable
MaximumPressure
psi(bar)
SPRAY GUNS
1 shown with 7890 cap & 13783 tip assembly t use with 14643-1⁄4-SSP stainless steel adapter2, 3, & 4 shown with 7890 cap & tungsten carbide orifice insert.
9004
11806
15250
20400-1⁄4M
20400-1⁄8F
13781S
9702S
9702A
9702C
15699
9527
CP12087
12086
7715
6671
4673
6960
14975
22665
1
2
3
4
Brass (all)SS (8) only)
Mild Steel
Mild Steel
Mild Steel
Mild Steel
Brass
Brass
Aluminum
Aluminumand
Brass
Brass (all) 250-Brass(17)
Brass (all)SS
(36)only)
Brass
Brass
Brass
Polypro-pylene
Model 9770 swivel strainers offerthe advantages of a swivelconnector with a built-in strainerassembly. They prevent hosetwisting in spray gun and other
similar applications. 9770 swivelstrainers feature stainless steelconstruction throughout and achoice of screen mesh sizes.They operate at pressures up to 4000 psi (275 bar). Internalsupports prevent screencollapse at high pressure. Writefor Data Sheet 9770.
Strainer Inlet Conn. Outlet Conn.No.* NPS (M) NPS (F)
9770-* Q\‰" Q\‰"
Strainer Inlet Conn. Outlet Conn.No.* NPS (M) NPS (F)
8510-* Q\‰" Q\‰"Model 8510 liquid strainers fitthe inlets of spray guns with !\›"NPS male connections. Theyfeature stainless steel construc-tion and a choice of screenmesh sizes. 8510 strainers
operate at pressures up to 4000psi (275 bar). An internal supportprevents screen collapse at high pressure. Write for DataSheet 8510.
E15
SP
RA
Y G
UN
S
SWIVEL CONNECTORS
HIGH PRESSURE STRAINERS
11990 15950
8510
9765
9770in-line design/choice of screens
1⁄4" NPS (M)swivel strainer/choice of screens
1⁄4" NPS (M)
ConnectionType
ConnectionType
FEMALEX
FEMALE
MALEX
MALE
MALEX
FEMALE
FEMALEX
HOSE SHANK
MALEX
HOSE SHANK
11990-7 Q\‰" (F) NPT Q\‰" (F) NPT11990-10 Q\‰" (F) NPT Q\‰" (F) NPS11990-14 E\ˆ" (F) NPT E\ˆ" (F) NPT11990-17 Q\„" (F) NPT Q\„" (F) NPT11990-20 E\ˆ" (F) NPT Q\‰" (F) NPS11990-8 Q\‰" (M) NPT Q\‰" (M) NPT11990-13 Q\‰" (M) NPT Q\‰" (M) NPS11990-15 E\ˆ" (M) NPT E\ˆ" (M) NPT11990-18 Q\„" (M) NPT Q\„" (M) NPT11990-6 Q\‰" (M) NPS Q\‰" (F) NPS11990-9 Q\‰" (M) NPT Q\‰" (F) NPT11990-12 Q\‰" (M) NPT Q\‰" (F) NPS11990-16 E\ˆ" (M) NPT E\ˆ" (F) NPT11990-19 Q\„" (M) NPT Q\„" (F) NPT11990-21 E\ˆ" (M) NPT Q\‰" (F) NPS
11990-60 Q\‰" (F) NPS11990-61 Q\‰" (F) NPS
11990-62 Q\‰" (M) NPT11990-63 Q\‰" (M) NPS11990-64 Q\‰" (M) NPT11990-65 Q\‰" (M) NPS
SwivelOrdering
No.
SwivelOrdering
No.
PRESSURERANGE
PRESSURERANGESCONNECTION
THREAD SIZES*(NPT/BSPT or NPS)
CONNECTIONS
(F) = Female Thread Conn. *NPT or BSPT = Tapered Pipe Thread(M) = Male Thread Conn. NPS = Straight Pipe Thread
✓
✓✓
✓✓✓✓
✓
✓✓
✓
✓
✓
✓
✓
✓✓
✓
✓
In-line swivel connectors aredesigned for use with GunJetspray guns. They attach to theinlet of spray guns to provide asmooth, leakproof, 360° swivelconnection. Swivel connectorsprolong hose life by eliminatingkinking and they reduce operatorfatigue as well.
11990 series swivels areconstructed of brass and areavailable with pipe thread or hoseshank connections in a variety ofsizes. They operate at pressuresup to 1000 psi (70 bar) andtemperatures up to 180°F (82°C).
9765 swivels are constructed ofstainless steel and feature a !\›"NPS (M) inlet with a !\›" NPS (F)outlet connection. 9765 swivelsoperate at pressures up to 4000psi (280 bar). Write for DataSheet 9765.
15950 swivel connectors areconstructed of brass or stainlesssteel and have a #\°" NPT or BSPT(M) inlet and a #\°" NPT or BSPT(F) outlet connection. They arerecommended for pressures upto 3000 psi (210 bar) andtemperatures up to 200°F (93°C).Write for Data Sheet 15950.
21550-90NP high pressureswivels are constructed of nickel-plated brass with Delrin bearingsand Buna-N O-ring, and featuresa choice of a !\›" NPT or BSPT(M) or #\°" NPT or BSPT (M)inlet, and a #\°" NPT or BSPT (F)outlet connection. They have amaximum temperature of 200°F(93°C) and a maximum pressureof 1500 psi (103 bar). Write forData Sheet 21550-90.
21550
21550-90NP
36466
36467
21550 series swivel connectorsare made of brass and offer avariety of pipe size connections.They operate at pressures up to1500 psi (105 bar) and temper-atures up to 200°F (93°C). Writefor Data Sheet 21550.
Model 36466 swivel featuresstandard 1#\⁄fl" long hose barbinlet connection and !\¤" NPT orBSPT (M) threaded outlet. Threesizes: Hose I.D. !\¤", %\°", or #\›".Model 36466L has 2&\⁄fl" long hosebarb to fit I.D. #\›" hose. Lock ringsecures trigger of CU150 gun infully engaged position.
Model 36467 swivel features !\¤"NPT (M) threaded outlet. Thread-ed inlet connection is #\›" gardenhose thread (F). Used withCU150 gun.
*Specify Mesh size required. (50, 100 or 200)
*Specify Mesh size required. (50, 100 or 200)
M x F F x F M x M
M xHoseShank
F xHoseShank
Thread Size*(NPT/BSPT
or NPS)
2Q\ŒÁ"2"2"2T\ŒÁ"1E\‰"
2Q\‰"2Q\‰"2T\ŒÁ"2E\‰"
2Q\ŒÁ"2E\ŒÁ"2Q\ˆ"2Q\‰"2T\ˆ"2"
Approx.OverallLength
ForHoseI.D. Up To
800 psiShankDia.
Up To800 psi
Up To1000 psi
.281" 2T\ˆ" Q\‰"
.406" 2E\‰" E\ˆ"
.281" 2T\ŒÁ"Q\‰"2E\ˆ"
.406" 2QT\´„"E\ˆ"2QU\´„"
Approx.OverallLength
Adapter Outlet Inlet Conn.
No. Conn. NPT or NPS (F) BSPT (F)
7599-1⁄4 1⁄4)7599-3⁄8
1⁄4) 3⁄8)
Adapter Outlet Conn. Inlet
No. NPT or Conn.BSPT (F) (F)
4676-1⁄8 1⁄8)4676-1⁄4 1⁄4)4676-3⁄8 3⁄8)4676-1⁄2 1⁄2)4676-3⁄4 3⁄4)
Adapter Outlet InletNo. Conn. Conn.
7029 1⁄2) NPT or BSPT (M)14269 1⁄4) NPS (F)13212-3⁄8 3⁄8) NPT or BSPT (M)13212-1⁄2 1⁄2) NPT or BSPT (M)
E16
SP
RA
Y G
UN
SINLET ADAPTERS OUTLET ADAPTERS
7029 4676
13212
10997
1557214269
146437599
Type 14643 adapters modify gun outlets from !!\⁄fl" -16 (M)thread connections to either !\°"or !\›" NPT or BSPT (F) outlets.They are constructed fromstainless steel or nickel-platedsteel and are designed for pres-sures up to 4000 psi (280 bar).Write for Data Sheet 14721.
Type 7599 adapters offer achoice of !\›" or #\°" NPT or BSPT(F) inlet connections with a !\›"NPS (F) outlet. Construction is of brass or stainless steel andthe stainless steel 7599 adapteroperates up to 2000 psi (140 bar).Write for Data Sheet 7599.
Type 13212 adapters featurebrass construction. They providea #\›" garden hose thread (F) inletconnection and a choice of #\°" or!\¤" NPT or BSPT (M) outletconnections. Write for DataSheet 13223.
Type 10997 adapters are usedwith guns having a 1" -14 (M)connection. The adapter outlet is either !\›" or #\°" NPT or BSPT(F). The 10997 adapter isstainless steel and designed foruse up to 3000 psi (210 bar).Write for Data Sheet 14721.
Type 7029 adapters provide a#\›" garden hose thread (F) inletand a !\¤" NPT or BSPT (M)outlet. Construction is of brass.Write for Data Sheet 7035.
Type 14269 adapters are madeof brass and provide a #\›" gardenhose thread (F) inlet with a !\›"NPS (F) outlet. Write for DataSheet 14353.
Adapters are available to modifyoutlet connections on AutoJetand GunJet spray guns for easyconnection with hoses, nozzles,extensions and other accessoriesof various sizes.
Type 4676 adapters convertspray gun outlets from standard!!\⁄fl"-16 thread connections to achoice of !\°", !\›", #\°", !\¤" or #\›"NPT or BSPT (F) outlet connec-tion. Type 4676 adapters areavailable in brass or stainlesssteel and operate at pressuresup to 2000 psi (140 bar) instainless steel. Write for DataSheet 10896
Type 15572 adapters secure thevalve seat in the inlet body of22AUH AutoJets and 23 and 31GunJets and permit the use ofstrainer assemblies directlybehind the spray tip. Femaleinlet and male outlet connectionsare both !!\⁄fl"-16 thread. Type15572 adapters are made ofbrass and operate at pressuresup to 800 psi (55 bar). Write forData Sheet 15578.
3⁄4)GardenHose
Thread(F)
11⁄16)-16UniJetThd.
INDEXMotor Driven Rotary Tank Washers...................F2, F3
Stationary Tank Washing Nozzles ...........................F4
Rotary (Fluid Driven) Tank Washing Nozzles....F5, F6
Foam Control, Self-Cleaning, Tube Cleaning,and Hot Melt Glue Tips .........................................F7
DescaleJet® High Impact NozzlesSelf-Aligning, One Piece and Dove Tail .........F8, F9
CasterJet®................................................................F9
SprayDry®
Fine Atomization Spray.......................................F10
AirJet® Fogger .......................................................F11
Adjustable Ball-Type NozzlesClip-Eyelet® TypeThreaded Type....................................................F12
WindJet® Blow-off Nozzles....................................F13
Self-Cleaning Manifold System......................F14, F15
Moisturizing/Coating Header .........................F16, F17
Flowback Nozzle Lances .......................................F18
F
Special PurposeSpray nozzles
section
405060
3.03.23.4
10.411.713.0
121110
ELECTRIC MOTOR
*Specify solid stream nozzle no. – such as 1⁄4MEG-0040
F2
SP
EC
IAL
PU
RP
OS
E
1⁄4 MEG-00101⁄4 MEG-00151⁄4 MEG-00201⁄4 MEG-00251⁄4 MEG-00301⁄4 MEG-00351⁄4 MEG-00401⁄4 MEG-00501⁄4 MEG-00601⁄4 MEG-00701⁄4 MEG-0080
NOTE: Flow rates tabulated above include pressure drop through unit.
Pressure drop through the unit in this area should be evaluated when sizingpumps. Consult a Spraying Systems Co. Rep. for specific information.
ACFrequency
Speedrpm
1 Complete*Cycle (min.)
Powerwatts
190E190A
MOTOR DRIVEN ROTARY TANK WASHERS
Air MotorOperates to 500 psi (35 bar)
Electric MotorOperates to 500 psi (35 bar)
DESIGN FEATURES
ACCESSORIES
PERFORMANCE DATA
ORDERING INFORMATIONAIR MOTOR
Approx.Speedrpm*
1 CompleteCycle (min.)**
* Assuming both exhaust filters are clean.** 35 revolutions are required for 1 complete cycle.
*35 revolutions are required for 1 complete cycle.
The 190 series tank washersfeature durable construction. Allwetted parts are of 316 stainlesssteel or TEFLON for maximumcorrosion resistance.
Model 22250 Adjustable Flangefor variable adjustment of sprayturret into tank. Write for DataSheet 22250.
22250
AIR MOTOR DATA
ELECTRIC MOTOR DATA (115VAC)
Max. recommended dia.coverage – 12( (3.7 m)
for high impact
Max. recommended dia.coverage – 12( (3.7 m)
for high impact
The 190 series tank washersfeature high impact cleaning andsignificant liquid savings com-pared to lower pressure tankwashing machines.
The spray turret on 190 tankwashers rotates in a sphericalpattern to clean all interior tanksurfaces with powerful solidstream jets. The spray turret issmall enough to fit through a 3)(76 mm) diameter tank opening,and the whole unit weighs lessthan 20 lbs. (9 kg), for easyportability as well as clean-in-place applications. 190 seriestank washers have 1) NPT orBSPT (F) liquid inlet connections.
Motors are located outside thetank away from dirt and harmfulcleaning solutions, and theyprovide controlled nozzle rotationindependent of liquid pressure.
The Model 190A features an airmotor and is ideal for applicationswhere spark hazards are present.The Model 190E is driven by anelectric motor and is ideal whereelectricity can be safely used.
Each model is available with a 3(, 4( or 6( (0.9 m, 1.2 m or 1.8 m)shaft, and an optional adjustableflange which allows the shaftlength to be adjusted to differentnozzle turret locations.
AirPressure at Motor psi
Rotary Tank Extension WeightWasher No. Length
AA190A-3* 3( 11 lbs.AA190A-4* 4( 121⁄2 lbs.AA190A-6* 6( 151⁄2 lbs.
Rotary Tank Extension WeightWasher No. Length
AA190E-3* 3( 14 lbs.AA190E-4* 4( 151⁄2 lbs.AA190E-6* 6( 181⁄2 lbs.
Air Consumption
scfm
TOTAL FLOW OF 2 NOZZLES (EQUAL CAPACITY)GALLONS PER MINUTE
NOZZLE LIQUID INLET PRESSURE (psi)NO. 100 200 300 400 500
3.1 4.4 5.4 6.3 7.04.7 6.6 8.1 9.4 10.56.2 8.8 10.8 12.4 13.97.7 10.9 13.3 15.4 17.29.1 12.9 15.8 18.2 20.410.5 14.8 18.1 20.9 23.511.8 16.7 20.4 23.6 26.414.2 20.1 24.6 28.4 31.816.4 23.2 28.4 32.8 36.718.3 25.9 31.7 36.6 41.019.9 28.2 34.5 40.0 44.5
Currentamps
50 HZ.60 HZ.
4.04.8
.6
.54034
98
F3
SP
EC
IAL
PU
RP
OS
E
AIR MOTOR DATA
*Assuming both exhaust filters are clean.**35 revolutions are required for 1
complete cycle.
AIR MOTOR DATA
*Assuming exhaust filter is clean.**61 revolutions are required for 1
complete cycle.
NOTE: Flow rates tabulated above include pressure drop through unit.
NOTE: Flow rates tabulated above include pressure drop through unit.
290A190AH
Model 22250 Adjustable Flangefor variable adjustment of sprayturret into tank.
The Model 290A tank washercan be job tailored to accomplishspecific requirements by (1)changing flow rates throughnozzle selection, (2) by adjustingliquid inlet pressure from 0-250psi (0-17 bar), and (3) by chang-ing air motor speed to regulatethe speed of the turret. In addition,the turret with its standard twosolid stream nozzle set-ups canbe fitted with four nozzles formore difficult cleaning applica-tions. Spray head will fit througha 7) (178 mm) diameter hole.
The Model 290A is available with3(, 4( or 6( (0.9 m, 1.2 m or 1.8m) extensions, and features astandard adjustable flange foraccurate positioning of the turretwithin the tank. Liquid inletconnection 2) NPT or BSPT (F).
All wetted parts feature 316stainless steel or TEFLON.Suitable for use with virtually any cleaning solution.
The 190AH is designed for highpressure applications…up to1000 psi (69 bar). The highvelocity impact of the solid streamspray is ideal for many cleaningand scouring applications thatcannot be accomplished withlighter duty cleaning units.
Like the 190A tank washer, the190AH features an external airdrive motor, located away fromdirt and corrosive cleaningsolutions. The spray turret fitsthrough a 3) (76 mm) diametertank opening and features 1) NPT or BSPT (F) liquid inletconnections.
Rotational speed of the nozzleturret is independent of thecleaning liquid pressure andflow. The nozzle turret accom-modates two 1⁄4 MEG WashJet®
nozzles that operate to amaximum recommended flowrate of 20 gpm (76 l/min). The190AH handles liquid temper-atures to 200°F (93°C). Allwetted parts are of 316 stainlesssteel or TEFLON for excellentcorrosion resistance.
Air MotorOperates to 1000 psi (69 bar)
Air Motor DriveMax. 250 psi (17 bar)
*Specify solid stream VeeJet nozzle no. – such as H3⁄4U-00100.
PERFORMANCE DATA PERFORMANCE DATA
DESIGN FEATURES
ACCESSORIES
DESIGN FEATURES
ORDERING INFORMATIONORDERING INFORMATION
*Specify solid stream nozzle no. – such as 1⁄4MEG-0040.
Max. recommended dia.coverage – 40( (12.2 m)
Max. recommended dia.coverage – 12( (3.7 m)
for very high impact
Air Air 1Pressure Approx. Consump- Completeat Motor Speed tion Cycle
psi rpm* scfm (min)**
40 3.0 10.4 1250 3.2 11.7 1160 3.4 13.0 10
Air Air 1Pressure Approx. Consump- Completeat Motor Speed tion Cycle
psi rpm* scfm (min)**
30 3.2 5 1960 4.4 9 1490 5.0 12 13
TOTAL FLOW OF 2 NOZZLES (EQUAL CAPACITY)GALLONS PER MINUTE
NOZZLE LIQUID INLET PRESSURE (psi)SIZE 100 200 300 400 500 600 700 800 900 1000
-0010 3.1 4.4 5.4 6.3 7.0 7.6 8.2 8.8 9.3 9.8-0015 4.7 6.6 8.1 9.4 10.5 11.5 12.4 13.3 14.1 14.9-0020 6.2 8.8 10.8 12.4 13.9 15.2 16.4 17.5 18.6 19.6-0025 7.7 10.9 13.3 15.4 17.2 18.8 20.3-0030 9.1 12.9 15.8 18.2 20.4-0035 10.5 14.8 18.1 20.9-0040 11.8 16.7 20.4-0050 14.2 20.1-0060 16.4-0070 18.3-0080 19.9
TOTAL FLOW OF 2 NOZZLES (EQUAL CAPACITY)GALLONS PER MINUTE
NOZZLE LIQUID INLET PRESSURE (psi)H3/4U 50 100 150 200 250
00100 22 32 39 45 5000250 55 78 96 111 12400350 77 108 133 153 17100500 107 151 185 214 23900700 144 204 250
Rotary Tank Extension WeightWasher No. Length
AA290A-3* 3( 43 lbs.AA290A-4* 4( 47 lbs.AA290A-6* 6( 56 lbs.
Rotary Tank Extension WeightWasher No. Length
AA190AH-3* 3( 11 lbs.AA190AH-4* 4( 121⁄2 lbs.AA190AH-6* 6( 151⁄2 lbs.
F4
SP
EC
IAL
PU
RP
OS
ESTATIONARY TANK WASHING NOZZLES
12900-16353 15498 3150
DESIGN FEATURES
DIMENSIONS & WEIGHTS
PERFORMANCE DATA
DESIGN FEATURES
PERFORMANCE DATA
Type 6353 and 12900 nozzleassemblies provide effectivewashing or rinsing of tanks ofmany sizes.
Both models feature 13 full conenozzles which spray all interiortank surfaces at pressures up to60 psi (4 bar). Nozzle headersare available in brass, mild steel,and stainless steel.
The type 6353 nozzle assemblyfeatures a large flow capacity forcleaning tanks up to 10' (3.1 m)in diameter. Flow rates can bevaried by using !\›" or #\°" full conenozzles. The 6353 fits throughtank openings 5" (130 mm) indiameter or more.
The type 12900-1 nozzle assem-bly offers an extra large flowcapacity for cleaning larger tanksup to 22' (6.7 m) in diameter.Flow rates can be varied by using!\¤", #\›" or 1" full cone nozzles.The 12900-1 can fit through tankopenings 9" (230 mm) in diameter.
For deep tanks, the type 12900-2is available with a 1!\¤" bottomoutlet connection for use with apipe extension and a 6353nozzle assembly.
The 15498 and 3150 keg anddrum washing nozzles arespecially designed for the efficientcleaning of smaller vessels.
Both models offer a choice of 15or 21 full cone spray tips whichspray all interior surfaces atpressures up to 150 psi (10 bar).
The type 15498 is designed topass through a standard kegbung, and to fit on automatic kegwashers. The maximum spray
head diameter is 1#\°" (35 mm)with a %\°" (16 mm) neck whichallows for drainage while washing.Stainless steel constructionprovides maximum corrosionresistance.
The type 3150 is available inbrass or stainless steel. Itfeatures a maximum spray headdiameter of 1%\°" (41 mm) with a#\›" (19 mm) neck to allowdrainage during washing.
Based on largest/heaviest version of each type.
PipeSize
NPT orBSPT
(F)
NozzleNo.
Pipe Conn.NPT or
BSPT (M)
Nozzle Order No.
15498-15-SS15498-21-SS3150-153150-21
NozzleHeaderOrderNo.
NozzleOrderNo.
With 13FullJetNozzlesOrderNo.
DIMENSIONS
KEG WASHING NOZZLES DRUM WASHING NOZZLES
“A” Diam.Cylindrical Tank
12900-2
11⁄2)PIPE
6353
ADiam. B
15498— 1) 1E\ˆ" 6Q\ˆ" T\ˆ" 1Q\ˆ lb.3150— 1) 1QQ\ŒÁ" 6O\ŒÁ" E\‰" 1Q\„ lb.
CDiam.
NetWeight
CAPACITY(gallons per minute)
10 psi
20 psi
30 psi
40 psi
60 psi
80 psi
100 psi
150 psi
—
5.27.0
—
7.39.8
—
8.711.7
—
9.913.3
5.57.7
12.116.2
6.38.7
13.818.5
7.09.6
15.320.6
8.511.719.025.6
12900-1-1⁄2 1⁄2HH-40 72 10' 86 11' 99 12' 109 13' 6QU\´„" 7Q\„"
3) 12900-1-3⁄4 3⁄4HH-7 148 12' 180 13' 205 15' 225 17' 6WU\´„" 8Q\‰"
12900-1-1 1HH-12 252 14' 306 16' 350 19' 385 22' 7U\´„" 9"
6353-1⁄4GG5 8.9 10.8 12.3 13.6 4' 4Q\„" 4Q\„"
11⁄2) 6353-1⁄4GG10 17.9 22 25 27 7' 4Q\„" 4Q\„"
6353-3⁄8GG22 39 48 55 60 10' 4E\‰" 5"
TOTAL gpm and Approx. Max. Tank Sizeat Pressure (psi)
20 psi
gpmTankDiam.“A”feet
TankDiam.“A”feet
TankDiam.“A”feet
TankDiam.“A”feet
TankDiam.“A”feetgpm gpm gpm Ht.
“B”Diam.“C”
30 psi 40 psi 50 psi
The Model 36640 mini tank wash-ing nozzle’s compact size fitsthrough 11⁄32) (26 mm) diameterand larger tank openings.
The nozzle can operate at lowerpressures and flow rates thantypical spinning nozzles and isideal for small container rinseapplications.
The mini rotating nozzle isequipped with 2 flat spray tipsthat provide cylindrical spraycoverage. The nozzle will spin inany mounted position. Stainlesssteel with hardened stainlesssteel bearings and races. Writefor Data Sheet 36640.
The 21400 and 18250 rotatingtype nozzles provide effectiveinternal scrubbing of small tanksand drums.
Both the 21400 and the 18250feature three high impact flatsprays mounted in a rotatingspray head which is driven by theflow of the cleaning liquid. Theseorifices are precisely positionedto provide complete orbitalcoverage of all interior surfaces.
Type 316SS with bearings andraces of hardened stainless steelfor maximum wear life, or 316SSfor maximum corrosionresistance. High impact scouringis achieved with spray pressuresup to 100 psi (7 bar).
The 21400 compact rotating typedrum cleaning nozzle fits throughopenings just 21⁄4) (60 mm) indiameter and weighs just 1 lb.(.45 kg), making it perfect fordrum and barrel washing. Lowcapacity flat spray tips are idealfor cleaning small vessels.
The 18250 rotating type tank anddrum cleaning nozzle fits throughholes just 27⁄32) (60 mm) in diam-eter and weighs 1.5 lbs. (.68 kg).Slightly larger orifice capacitiesare available for effective clean-ing of tanks, barrels, and drums.
F5
SP
EC
IAL
PU
RP
OS
E
ROTARY TANK WASHING NOZZLES
2140018250 23240-2, -3 36640
TANK & DRUMCLEANING NOZZLE
COMPACTDRUM CLEANING NOZZLE
COMPACTKEG WASHING NOZZLE
SMALL TANK WASHING NOZZLE
The compact 23240 nozzle willfit through a 11⁄32) (26 mm) diam-eter hole. Two flat spray orificesare positioned to produce theself-rotating force and provideside sprays. In Model 23240-3 atop orifice is added, resulting in a full spherical spray coverage.
Nozzle material is 316SS,bearings and races made ofhardened stainless steel formaximum wear life…or…type316 series stainless steel(optional) for maximum corrosionresistance.
WEIGHT 1⁄2 lb. (0.23 kg).Maximum operating pressure is200 psi (13.8 bar). Maximumtemperature is 350°F (177°C).Write for Data Sheet 23240.
Nozzle Order No.
21400-HSS10-316SS21400-HSS18-316SS18250-HSS21-316SS18250-HSS45-316SS
Nozzle Order No.
36640-1.7-SS
Nozzle Order No.
23240-2-HSS-5-316SS23240-2-HSS-8-316SS23240-3-HSS-5.7-316SS23240-3-HSS-7-316SS23240-3-HSS-10-316SS
3⁄4) NPT or BSPT (F) 3⁄4) NPT or BSPT (F) 1⁄2) NPT or BSPT (F) 1⁄4) NPT or BSPT (F)
DESIGN FEATURES
DESIGN FEATURES
DESIGN FEATURES
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
NozzleNo.
Pipe Conn.NPT or
BSPT (F)
DIA.
CAPACITY (gallons per minute)10 psi 20 psi 30 psi 40 psi 50 psi 60 psi
59
10.523
7.112.714.8
32
8.715.618.2
39
10182145
11.2202350
12.2222655
CAPACITY (gallons per minute)10 psi 20 psi 30 psi 40 psi 50 psi 60 psi
.8 1.2 1.5 1.7 1.9 2.2
CAPACITY (gallons per minute)20psi
40psi
60psi
80psi
100psi
120psi
150psi
200psi
3.55.74.04.97.1
5.08.05.77.0
10.0
6.19.87.08.6
12.2
7.111.38.19.9
14.1
7.912.69.0
11.115.8
8.713.99.9
12.117.3
9.715.511.013.619.4
11.217.912.715.722.0
Nozzle A B C Hex. NetNo. Weight
36640– 17⁄8) 1) 19⁄16) 7⁄8) 3 oz.23240– 31⁄2) 1) — — .5 lb.
A B
21400– 3⁄4) 5) 41⁄8) 121⁄32) 13⁄4) 1 lb.
18250– 3⁄4) 51⁄4) 45⁄16)23⁄16) 13⁄4) 1.5 lb.Diam.
C Hex. NetWeight
27500 (A thru E) 1⁄2-8-TEF27500 (A thru E) 3⁄4-18-TEF27500 (A thru E) 3⁄4-32-TEF27500 (A thru E) 3⁄4-46-TEF27500 (A thru E) 1-50-TEF27500 (A thru E) 1-70-TEF27500 (A thru E) 1-90-TEF27500 (A thru E) 2-100-TEF27500 (A thru E) 2-125-TEF27500 (A thru E) 2-150-TEF27500 (A thru E) 2-175-TEF27500 (A thru E) 2-200-TEF27500 (A thru E) 3-250-TEF27500 (A thru E) 3-300-TEF27500 (A thru E) 3-350-TEF
F6
SP
EC
IAL
PU
RP
OS
EROTARY TANK WASHING NOZZLES
27500 28500
PERFORMANCE DATA
DESIGN FEATURES DESIGN FEATURESDIMENSIONS
DIMENSIONS
The 27500 TEFLON® Rotarytank cleaning nozzle offers anew dimension of performanceand versatility in low pressurecleaning/rinsing applications.
It is constructed of FDA-approvedmaterial that is corrosion andchemical-resistant.
The two-piece nozzle features aspray head that is rotated by thepressurized flow of the spraysolution. There are no externalmotors or gears.
The compact nozzle produceseffective solid stream sprays,and can be operated at pressuresof 10-50 psi (.7-3 bar).
Five nozzle body sizes are avail-able with threaded inlets (NPT orBSPT) that will accept 1⁄2), 3⁄4), 1),2), and 3) supply pipes.
The multiple orifice configurationof the spray head providesexceptional coverage in any offive available spray patterns, 180°to 360°. (Refer to drawings).
The new 28500 tank washingnozzle is engineered for sanitaryapplications. The nozzle issecured to the inlet tubing bystainless steel pin connections.Nozzle edges are tapered. It isconstructed of FDA-approvedTEFLON material.
The nozzle bottom’s slanted con-figuration promotes self-drainingin the downward vertical position.
The 28500 nozzle accommodates3⁄4), 1), and 11⁄2) tube sizes. Flowrate capacity of the 3⁄4) size is 23 gpm (87 l/min); the 1) size, 33 gpm (125 l/min); and the 11⁄2)size, 53 gpm (201 l/min).
The nozzle provides completecoverage of the internal surfacesof the vessel being cleaned.Write for Data Sheet 28500.
A
180°
B
180°
C
270°
D
270°
E
360°
TYPE OF SPRAYCOVERAGE ANGLE
INLET CONN.NPT OR BSPT
1⁄2)3⁄4)
1)
2)
3)
Flow rates range from 4 gpm (15 l/min) to 341 gpm (1490 l/min).For complete flow rate informa-tion, refer to Data Sheet numbers27500-1⁄2M, 27500-3⁄4M, 27500-1M, 27500-2M, and27500-3M.
INLET X Y ZDIAM. DIA. LENGTH
3⁄4)
1)
11⁄2)
21⁄4)
23⁄4)
35⁄8)
25⁄8)
27⁄8)
35⁄8)
3⁄8)1⁄2)3⁄4)
XDIA.
YLENGTH
ZFLATS
115⁄16)
21⁄4)
23⁄4)
47⁄8)
67⁄8)
23⁄8)
25⁄8)
3)
43⁄8)
57⁄8)
11⁄8)
15⁄16)
15⁄8)
23⁄4)
37⁄8)
CAPACITY* – GALLONS PER MINUTE
NOZZLE NO. 10 20 30 40 50psi psi psi psi psi
4 5.7 6.9 8 8.99 12.7 15.6 18 20
16 23 28 32 3623 33 40 46 5125 35 43 50 5635 49 61 70 7845 64 78 90 10150 71 87 100 11263 88 108 125 14075 106 130 150 16888 124 152 175 196
100 141 173 200 224125 177 217 250 280150 212 260 300 335175 247 303 350 391
*Suggested optimum operating range 20 to 40 psi.
TEFLON TYPE®
10706-HSS .2110706-HSS .4310706-HSS .5410706-HSS .5710706-HSS 1.0410706-HSS 2.0810706-HSS 4.2
F7
SP
EC
IAL
PU
RP
OS
E
FOAM CONTROLNOZZLE
22561 20235
TUBE CLEANINGNOZZLES
HOT MELT GLUE TIPS26280 26281
SELF-CLEANINGNOZZLES
10706
20210DESIGN FEATURES DESIGN FEATURES DESIGN FEATURES
DESIGN FEATURES
PERFORMANCE DATA
The foam control nozzle is specif-ically designed for use on aerationtanks in waste treatment plants.
It provides a deflected flat spraypattern at low pressures. If clogging occurs, simply lift thecounterweight lever and allowthe solid stream flow to purgethe nozzle.
The foam control nozzle featuresrugged bronze construction witha neoprene rubber deflector anda 1⁄4) NPT or BSPT (M) inlet con-nection. Write for Data Sheet22561.
The 20235 series and 20210series nozzles are available infan or needle jet versions andare self-cleaning to maintaineffective shower performancewith minimal effort.
Reducing the line pressureretracts a purge piston to purgefibers and other suspendedsolids from the clogged nozzle.This feature makes themparticularly well-suited for usewith white water.
The 20235 series and 20210series nozzles are speciallydesigned to interchange withLodding self-cleaning showernozzles. They provide fast andeasy installation and alignment.Their longer length allows morepattern offset to eliminate sprayinterference and provides greaterresistance to piston binding. Bothmodels are constructed of 316stainless steel.
The 10706 series tube cleaningnozzle features very high impactcleaning from six solid streamsprays at operating pressures upto 5000 psi (350 bar). 10 degreebackward spray projection aidsin propelling the nozzle throughthe tube.
The 10706 series nozzle featureshardened stainless steel construc-tion. It has a 1⁄8) NPT or BSPT (F)inlet connection and a maximumoutside diameter of 1⁄2) (12.7 mm).
Hot melt glue tip models 26280and 26281 are designed to fitmost standard and hand-heldextrusion guns. These econom-ical glue tips each provide sevenorifice diameters to choose from.
The tips are constructed of brassfor reliable performance. Wear-resistant stainless steel orificesprovide long wear life.
The cap type model 26280 isdesigned for automatic produc-tion line applications. Model26281 is threaded and designedfor either automatic or handgunapplications.
For more information, write forBulletin 318.
Write for Data Sheets 20235 and20235-2.
Write for Data Sheets 20210 and20210-2.
* No. 10706-HSS .54 is supplied without front orifice.
Purge
22561 with Split-Eyelet connection
Purge
Spray
Spray
1⁄2)(12.7 mm)
Diam.
6 Holes EquallySpaced-“A” Diam.
“B” Diam.
5⁄16)(7.9 mm)
Diam.
11⁄32)(8.7 mm)
Flats
CAPACITYNozzle (gallons per minute)Order
300 500 1000 2000 5000No.psi psi psi psi psi
.58 .74 1.1 1.5 2.4 .015 .0151.2 1.5 2.2 3.0 4.8 .022 .0221.5 1.9 2.7 3.8 6.0 .025 *1.6 2.0 2.9 4.0 6.4 .025 .0252.9 3.7 5.2 7.4 11.6 .033 .0335.7 7.4 10.4 14.7 23 .047 .047
11.5 14.9 21 30 47 .067 .067
“A” Diam.
in inches
“B” Diam.
in inches
Spraying Systems offers severalbasic models of self-aligningDescaleJet nozzles withtungsten carbide orifice insertsfor high impact scale removal, inhot strip mill applications.
Models AA218AC and AA218C(the latter designed to accept ashut-off cap) are available withstandard no. 21331-1 vane-typehigh impact attachment or
optional no. 21331-2 vane-typehigh impact attachment withstrainer. Both nozzles feature 1"NPT or BSPT (M) adapter bodies.
Models AA117AC (#\›" NPT or BSPT (M)) and AA118AC (1" NPT or BSPT(M))DescaleJet nozzles offerAA128A and AA128B highimpact attachments or optionalAA127A and AA127B highimpact/strainer attachments.
DescaleJet nozzles have all thefeatures required in today’sdescaling operations.
● Stabilized spray pattern foruniform impact
● Tungsten carbide orifice forlong life
● Self-aligning tip for spraypattern accuracy
DescaleJet Pipe Conn. Orifice Used with Hi-Impact Attachment No. UsedNozzles NPT or Mat. with Self
and BSPT (M)127A 127B 127C 128A 128B 128C 13336 21331-1- 21331-2- Strainer Align.
Assemblies E\ˆ E\‰ 1 HSS TC Note (1) Note (2) 11441
117 Á Á Á** Á** Á** Á** Á117C Á Á Á** Á** Á** Á** Á117A Á Á Á** Á** Á** Á** Á117AC Á Á Á** Á** Á** Á** Á118 Á Á Á Á Á Á Á118C Á Á Á Á Á Á Á118A Á Á Á Á Á Á Á118AC Á Á Á Á Á Á Á218C Á Á Á Á Á218AC Á Á Á Á ÁH3⁄8UHSS-E Á Á Á* Á* Á* Á*3⁄4USSTC-E Á Á Á Á Á Á17585 Á Á Á Á***21127 Weld Conn. Á Á Á***
SP
EC
IAL
PU
RP
OS
E
HIGH IMPACTSELF-ALIGNING
SPRAY NOZZLES
ONE PIECE
DESIGN FEATURESDESIGN FEATURES DESIGN FEATURES
(Optional Set-up)(Standard Set-up)
Stainless steel adapter
No. 21330-2 highimpact attachment withstabilizer vane, strainer,and spray tip sub-assemblies
No. 21330-1 highimpact attachment withstabilizer vane andspray tip sub-assembly
Stainless steel retainer
DESCALEJET® NOZZLE ASSEMBLY
* When used with 3968SS adapter.** Cannot be removed unless nozzle body is
removed from header.*** Dove-tail alignment.
Note (1): See Data Sheet 21330-1 for listing of sizes.Note (2): Includes strainer. See Data Sheet 21330-2 for listing of sizes.
ORIFICE MATERIALSHSS = Hardened Stainless SteelTC = Tungsten Carbide
The threaded one-pieceDescaleJets offer quality perfor-mance in a basic body style.Every nozzle can be aligned onan individual basis when anorifice needs replacing.
Hardened stainless steel is thematerial for the H3/8U-HSS----Enozzle, as seen on Data Sheet6120. A tungsten carbide orifice isprovided in the 3/4U-SSTC----E,and may be examined on DataSheet 7870.
High impact attachments andstrainers are available.
DESCALEJET NOZZLES
Write for Data Sheet 117AC. Write for Data Sheet 118AC. Write for Data Sheet 218AC. Write for DataSheets 6120and 6120-1
Write for DataSheets 7870and 7870-1M.
TungstenCarbideOrificeInsert
Header
3⁄4) NPT orBSPT (M)
3⁄4) USSTC—EDescaleJet Nozzle
Stainless SteelBody and Tip Holder
Front View of Nozzle
Locating Groovesin No. 11394-SS
AdapterSpray Pattern
Parallel to Flatsin Spray TipAssembly
Angle Between Groovesand side of Hex. of Adapter
Spray Pattern
F8
AA118ACAA117AC AA218AC H3⁄8UHSS-E 3⁄4USSTC-E
3/8
1/2
3⁄8CJL-2.5-120-SS3⁄8CJL-3-120-SS3⁄8CJL-4-120-SS3⁄8CJL-5-120-SS3⁄8CJL-5-50-SS3⁄8CJL-6.5-110-SS3⁄8CJL-6.5-120-SS3⁄8CJL-8-60-SS3⁄8CJL-8-110-SS3⁄8CJL-8-120-SS1⁄2CJL-9-110-SS1⁄2CJL-9-120-SS1⁄2CJL-9-135-SS1⁄2CJL-10.5-110-SS1⁄2CJL-10.5-120-SS1⁄2CJL-12-120-SS1⁄2CJL-12-135-SS
1550E2530E2540E2550E2560E3230E3240E3250E3260E4050E4060E
F9
SP
EC
IAL
PU
RP
OS
E
DOVETAIL
SPRAY NOZZLE
2112321127
DESIGN FEATURES DESIGN FEATURES
19930
PERFORMANCE DATA
21125max. 3000 psi (210 bar) max. 1500 psi (100 bar)
● Interchangeable spray tipsslide in the groove with thespray pattern offset 15°
● Nozzle bodies available forfull or spot welding to pre-aligned setting in headers
● The spray tip is secured inposition with the cap
The self-aligning spray tips inthese assemblies are well-suitedto the rugged needs of industry.The dovetail groove providesaccurate, repeatable patternpositions in descaling, rollcooling, continuous casting andsimilar operations.
Tip materials are offered toaccommodate a wide range ofservice conditions and includetungsten carbide, hardenedstainless steel, stainless steeland brass.
High Pressure Assemblies:
17585 and 21127
Maximum operating pressureof 3000 psi (210 bar)
Medium Duty Assemblies:
18893, 21123, 21125 and 19155
Maximum operating pressureof 1500 psi (100 bar)
Developed to fulfill the exactingneeds of continuous casting, thepatented (Pat. No. 4,349,156)CasterJet nozzle delivers aprecise mixture of air and waterin a flat fan spray pattern. Thisfinely atomized spray provideshigh heat transfer rates for fastheat removal.
● Uniform water distribution
● Wide operating range
● Low air quantity demands
● Non-clogging design
● Self-aligning spray tips
The atomization is produced bya unique new design. Water isforced into the expansion cham-ber as a high velocity stream. Itshatters against a long-wearingtarget pin to give fine dropletswhile an air stream rushing pastthe pin creates further break-up.The resulting atomized spray isfound to be so effective at coolingthat significant reductions inwater volumes are possible.
All critical parts are interchange-able. Various length extensionscan be shaped to fit customerneeds. The non-clogging designuses smooth, clean passages.Metering orifices for both air andwater facilitate fine tuning flowrates even within the same air or water pressure system. Theunique features of the CasterJetprovide spray accuracy andefficiency in an easily maintainedproduct.
Nozzle*Size
NozzleInlet
Conn.NPT orBSPT
SpraySet-upOrderNo. Air Liquid
NOTE:Model No. 19920 uses Spray Set-ups E\ˆ CJL-6.5 thru 8
Model No. 19925 uses Spray Set-ups Q\„ CJL-9 thru 12
Model No. 19930 uses Spray Set-ups E\ˆ CJL-2.5 thru 5
* Additional nozzle sizes are also available. Write for Data Sheets 6120-1,7870-1M & 13234-1M.
Write for Data Sheet 21127. Write for DataSheet 21123.
Write for DataSheet 21125.
CAPACITY (gallons per minute)
COVERAGEin inches
AVERAGEIMPACT
per linear inchat 2000 psi
in lbs. per inch
1000psi
1500psi
2000psi
2500psi
3000psi 8" 12"
3Q\‰"
5"5"5"5"
6"6"6"6"
7Q\ˆ"7Q\ˆ"
4E\ˆ"
7Q\ˆ"7Q\ˆ"7Q\ˆ"7Q\ˆ"
8Q\‰"8Q\‰"8Q\‰"8Q\‰"
10"10"
spray height spray height
8" 12"
239
1215187
1012151012
1768
1012579
1079
2515202530152025302530
3118253137182531373137
3521283542212835423542
4024324047243240474047
4326354352263543524352
InletOrifice
Dia.
Liquid Pressure 100 psi
Air Pressure 45 psi
.106"
.109"
.135"
.150"
.150"
.185"
.185"
.189"
.189"
.189"
.232"
.232"
.232"
.236"
.236"
.250"
.250"
.102"
.109"
.130"
.144"
.144"
.163"
.163"
.177"
.177"
.177"
.191"
.191"
.191"
.216"
.216"
.224"
.224"
scfm gpm SprayAngle
7.59
121515
19.519.5
242424272727
31.531.5
3636
2.53.04.05.05.06.56.5
888
9.09.09.0
10.510.512.012.0
120°120°120°120°50°
110°120°60°
110°120°110°120°135°110°120°120°135°
Materials:CasterJet Length Body,Model No. Approx. Tubing and
Target Bolt
19920-78-BRSS 3E\´„"19925-200-BRSS 7U\ˆ" BRASS19930-78-BRSS 3E\´„" AND19930-100-BRSS 3QT\ŒÁ" STAINLESS19930-150-BRSS 5WO\´„" STEEL19930-200-BRSS 7U\ˆ"
SX1⁄4) 1) 15⁄8) 53⁄8) 1) 17⁄8) 5.51⁄4) 1) 17⁄8) 6
ST 3⁄8) 1) 21⁄8) 6.51⁄2) 11⁄4) 21⁄4) 101⁄4) 11⁄2) DIA. 21⁄2) 16
SB 3⁄8) 11⁄2) DIA. 21⁄2) 161⁄2) 11⁄2) DIA. 21⁄2) 16
Inlet PipeConn. NPTor BSPT (F)
F10
SP
EC
IAL
PU
RP
OS
E
FINE ATOMIZATION SPRAY
SPRAY NOZZLES
SX ST SB1⁄4), 3⁄8) NPT or BSPT (F) 1⁄4), 3⁄8), 1⁄2) NPT or BSPT (F)1⁄4), 3⁄8), 1⁄2) NPT or BSPT (F)
Spraying Systems Co. pioneeredthe development of specializednozzles for the spray dryingindustry in the early ’40’s. Todaywe continue to offer an expandedand updated choice of nozzletypes and materials of construction.
SprayDry nozzles are designedto provide good atomization withuniform spray distribution through-out their hollow cone pattern.
These durable, precision nozzlesare specifically designed forquick and easy assembly anddisassembly.
SX and ST SprayDry nozzlesprovide a wide capacity range of3.4 to 151 gph (12.8 to 572 l/h) at1000 psi (69 bar) and operate atup to 7000 psi (483 bar).
Their nozzle body, cap and corebodies are machined from solid303 stainless steel bar stock(316SS is also available).
Their orifice inserts and coresare available in a number ofmaterials to meet the needs ofany application.
These are: specially hardenedand treated stainless steel (A-type), chrome carbide, and a special carbide (Y-type).
Chrome carbide provides thebest corrosion resistance of thecarbides, and fair to good wearresistance.
Y-carbide provides both excellentcorrosion resistance and excel-lent wear resistance.
Type SB SprayDry nozzles arebased on the same basic designconfiguration as type ST and SXnozzles, except that the SBnozzles are larger and aredesigned to provide higher capac-ities. With water the SB nozzlesprovide a capacity range from 55 to 570 gph (208 to 2157 l/h) at 1000 psi (69 bar) pressure.Depending on specific orificeinsert core combinations, thespray angles at the orifice rangefrom 34° to 109°.
The orifice inserts and cores can be supplied in a choice ofspecially treated hardenedstainless steel, or Y-carbide.Nozzle body, cap, and core bodyare made of type 303 stainlesssteel. The maximum recommend-ed spraying pressure is 7000 psi(483 bar).
Recommended operating temper-ature is 300°F (150°C) with thestandard fiber gasket. Optionalgasket materials are available to allow operation at up to1000°F (540°C).
ⓦ Non-fat dry milk
ⓦ Whey
ⓦ Coffee
ⓦ Tea
ⓦ Vegetables
ⓦ ChemicalsFor complete performance dataon SprayDry nozzles write forBulletin 250A and Data SheetNo. 24070M.
DESIGN FEATURES
COMMON APPLICATIONS
PERFORMANCE DATA
DIMENSIONS & WEIGHTS
Nozzle Type
Overall Dimensions
Type STType SX
Type SB
Body
Gasket
Core
OrificeInsert
Cap
Body
Gasket
Core
OrificeInsert
Cap
Body
Gasket
Core
OrificeInsert
Cap
“A”Hex.
“B”Length
NetWeight
oz.
F11
SP
EC
IAL
PU
RP
OS
E
23412 QJ25655
ⓦ Plant propagation
ⓦ Humidification
ⓦ Evaporative cooling
ⓦ Insecticide spraying
FOGGER SPRAY NOZZLE
The Threaded-type air-assistedAirJet Fogger produces highquality, cost-efficient dry fog.Drops from the AirJet Foggercan average fifteen microns insize and less.
Drop size is adjustable to meetspecific industrial needs by
changing the ratio of compressedair to water.
Maintenance time is reducedbecause the built-in check valve,spray tip, and internal strainerare quickly serviced by hand,without tools. The nozzle canuse PVC pipe and low pressureair tubing.
The AirJet Fogger’s tip has a rel-atively large clog-reducing orifice.
The Split-Eyelet version providesa faster way of installing the nozzle onto the liquid supply pipe,as additional pipe fittings are notrequired. Pipe cutting, threading,and brazing are eliminated.
The Split-Eyelet version featuresa chemical-resistant, tight-fittingBuna-N seal to ensure leak-freeperformance.
For additional details on theAirJet Fogger, ask for Bulletin 310A.
Specify Model No.Example: 23412-1⁄4-20
QJ25655-3⁄4-20QJ25655-1⁄2-20QJ25655-1-20
ORDERING INFORMATION
COMMON APPLICATIONS
PERFORMANCE DATA
DESIGN FEATURES
* For applications with liquid pressures below 30 psi (2 bar),request end cap sub-assembly 21950-20-NYB.
Spray Tip(Brass)
Orifice
AcceleratingPassageway
Air Inlet
Body(Nylon)
Check ValveDiaphragm
(EPDM)
PressurizingPocket
Quick UniJet®
Cap (CELCON)
FluidImpingementSurface (Brass)
Liquid Inlet
Strainer(Stainless Steel)
End Cap(Nylon)
In each line, figures in plain face indicate water atomized in gph atpsi water pressure. Figures in bold face indicate atomizing air inscfm at psi air pressure.
20*
30
40
50
60
70
80
90
100
3.11.4
3.51.3
4.31.2
4.91.2
1.72.8
2.12.5
3.12.3
3.72.2
4.32.1
4.82.0
5.31.9
1.73.6
2.23.4
3.13.2
3.73.0
4.32.9
4.92.7
5.42.6
5.82.5
2.34.2
3.13.9
3.63.8
4.23.6
4.93.5
5.33.3
2.25.0
3.14.8
3.74.6
4.34.4
4.84.3
2.15.9
3.15.6
3.65.4
4.35.3
2.26.7
3.16.5
3.75.9
3.17.3
WaterPres.in psi
Air Pressure in psi
10 20 30 40 50 60 70 80
gphscfm
gph/scfm FOR NO. 23412-1/4-20AIRJET FOGGER (FLUID ORIFICE – .020) DIA.)
F12
SP
EC
IAL
PU
RP
OS
E
The versatile Clip-Eyelet nozzlesystem features easy, no-toolinstallation and removal. Theassembly is affixed to the headerby a spring-grade stainless steelclamp. It fits 1), 11⁄4),11⁄2) or 2)pipe with 9⁄16) (14.3 mm) holes.
The new 37235 adjustable ball-type nozzle combines athreaded pipe connection withan adjustable direction spray tipfor application versatility.
Both nozzles are constructed of polypropylene for excellentchemical and heat resistance upto 180°F (82°C).
The Clip-Eyelet nozzle canhandle pressures to 60 psi (4.1bar), the threaded-type 125 psi(8.6 bar).
For both nozzles, easy identi-fication ball-type, flat andhollowcone spray tips are color-coded by flow rate. The total angleof tip swivel adjustment varies
from 42° to 54°. Write for DataSheets 20570 and 37235.
This threaded ball-type acceptsa variety of nozzles with !\›", #\°"and !\¤" NPT or BSPT (M) threads.“No-tool” tip and threaded ballremoval is quick. The retainingcap unscrews by hand, the ball-tip or threaded ball isremoved from the nozzle body,and a new tip is inserted.
ⓦ Metal washing and finishing
ⓦ Other low pressure applications
PERFORMANCE DATA
COMMON APPLICATIONS
DESIGN FEATURES
ORDERING INFORMATIONClip-Eyelet with tipSpecify Clip-Eyelet no. + tip no.
Clip-Eyelet with threaded ballSpecify Clip-Eyelet no. + ball no.
Threaded Type with TipSpecify nozzle no. + spray tip no.
Threaded Type with Threaded ballSpecify nozzle no. + ball no.
Threaded Ball:1⁄4) outlet connection: CP20582-1/4-PPB3⁄8) outlet connection: CP20582-3/8-PPB1⁄2) outlet connection: CP20582-1/2-PPB
Optional Seal:To retrofit headers with 16.7 mm diameter hole:CP20579-BU SEAL (Buna-N)CP20579-VI SEAL (VITON)
HOLLOW CONE SPRAY TIPS
FLAT SPRAY TIPS
Clip-Eyelet Data Threaded Nozzle DataCOLOR CODE TO
CLIP-EYELET CLAMPNO. BODY CAP ON
20570-1-PP Med. Lt. 1)Gray Gray Pipe
20570-11⁄4-PP Med. Lt. 11⁄4)Gray Gray Pipe
20570-11⁄2-PPB Black Lt. 11⁄2)Gray Pipe
20570-2-PPB Black Lt. 2)Gray Pipe
RETAINING CAP
THREADEDBALL
SPRAYTIP
BODY
Adjustable ball-type nozzlesCOLOR-CODED
THREADED TYPETYPE
20570 37235
Pipe Inlet Adjustable Ball TypeConn. NPT Nozzle No. foror BSPT Threaded Version
Q\‰"* 37235-Q\‰-PPE\ˆ" 37235-E\ˆ-PPQ\„" 37235-Q\„-PP
*Not recommended for capacities over3 gpm (11 l/min) at 40 psi (3 bar).
Note: No. CT PLUG-PP Optional blank tip is used to replace CA- or CT- tip to shut-off spray nozzle.
MAX.TOTAL
ADJUSTMENT
RETAINING CAP
O-RINGBODY
COLOR CODEDBALL-TYPE SPRAY TIP
SPRAYTIP & VANE CAPACITY IN GALLONS PER MINUTE ANGLE
SUB-ASSEMBLY 5 10 15 20 30 40 60 7 20 60NO. psi psi psi psi psi psi psi psi psi psi
CA15-30.1-PP 1.6 2.3 2.8 3.2 3.9 4.5 5.4 46° 49° 51°
CA25-30.1-PP 2.0 2.8 3.4 3.9 4.7 5.4 6.6 45° 47° 50°
CA50-50.1-PP 3.5 5.0 6.1 7.0 8.6 9.9 12.1 38° 46° 48°
CA50-50.3-PP 3.5 5.0 6.1 7.0 8.5 9.8 11.9 75° 75° 76°
CLIP-EYELET TIP SIZES CAPACITY IN GALLONS PER MINUTESPRAY ANGLE AT 40 psi TIP 5 7 10 20 30 40 60
15° 25° 40° 50° 65° 80° COLOR psi psi psi psi psi psi psi
CT6510-PP CT8010-PP Beige .35 .42 .50 .71 .86 1.0 1.2
CT4020-PP CT5020-PP CT6520-PP Lt. .71 .84 1.0 1.4 1.7 2.0 2.5Blue
CT2530-PP CT4030-PP CT5030-PP CT6530-PP Orange 1.1 1.3 1.5 2.1 2.6 3.0 3.7
CT4040-PP CT5040-PP CT6540-PP CT8040-PP Green 1.4 1.7 2.0 2.8 3.5 4.0 4.9
CT1550-PP CT4050-PP CT5050-PP CT6550-PP CT8050-PP Yellow 1.8 2.1 2.5 3.5 4.3 5.0 6.1
CT2560-PP CT4060-PP CT5060-PP CT6560-PP CT8060-PP Blue 2.1 2.5 3.0 4.2 5.2 6.0 7.3
CT1570-PP CT2570-PP CT4070-PP CT5070-PP CT6570-PP CT8070-PP Red 2.5 2.9 3.5 4.9 6.1 7.0 8.6
CT15100-PP CT25100-PP CT40100-PP CT50100-PP CT65100-PP CT80100-PP Brown 3.5 4.2 5.0 7.1 8.6 10.0 12.2
F13
SP
EC
IAL
PU
RP
OS
E
BLOW-OFF NOZZLES
ⓦ Parts cleaning/drying
ⓦ Parts cooling
ⓦ Moving of materials
Model 727 WindJet blow-offnozzles deliver high impact, flatstreams of compressed air.Made of ABS plastic, RYTON, oraluminum, they're designed forcooling, drying and blow-offapplications in conveyor, CIPand hand-held set-ups. Side-by-side positioning provides aneffective air curtain. Maximum
operating pressure for each is100 psi (7 bar).
The air stream of the ABSversion is discharged throughsixteen orifices recessedbetween protective ribs. Thiskeeps dead-end pressure belowOSHA requirements for manualuse. Operating noise levels areunder OSHA standard 1910.95.
Handles up to 170°F (77°C) at100 psi (7 bar).
The 727-RY RYTON WindJetnozzle resists chemical corro-sion and temperatures to 300°F(149°C) at 40 psi (3 bar). It toomeets OSHA standards fornoise and dead-end pressure,and can be used in hand-held
applications.
Although not recommended forhand-held use, the Y727-ALaluminum WindJet nozzle offersexceptional durability in severecyclic applications. The alu-minum version operates at up to400°F (200°C) at 100 psi (7 bar).Write for Data Sheet Y727-AL.
WindJet nozzle used with trigger valve spray gun provides excellent handcontrol.
Specify: AA727-1/4-15(for ABS plastic)AA727-1/4-RY-15(for RYTON plastic)Y727-AL(for aluminum)
727-RY727-1⁄4 Y727-AL
WindJet nozzles, mounted side by side, produce an effective air curtain.
NozzleType
727
727-RY
Y727-AL
For 727 and 727-RY
Air Flow Rates
AIR
FL
OW
A I R P R E S S U R ENOTE: Actual air flow equivalent to Lechler 66-6001-3062
Convenientmounting hole3⁄16) (4.8 mm)
Diameter(For 727 and 727-RY)
1⁄4) NPT (M) or1⁄4) BSPT (M) Inlet
Connection
DESIGN FEATURES
PERFORMANCE DATA
DIMENSIONS
ORDERING INFORMATIONCOMMON APPLICATIONSA B C D
3O\ŒÁ"
3O\ŒÁ"
3QU\´„"
1U\ˆ"
1U\ˆ"
2"
1EO\Á‰"
1EO\Á‰"
–
Q\‰"
Q\‰"
Q\‰"
30 SCFM
20 SCFM
10 SCFM
60 PSI 100 PSI80 PSI40 PSI20 PSI0
40 SCFM
1132
1132
1132
1132 (l/min)
(l/min)
(l/min)
(1.4 bar) (2.8 bar) (4 bar) (5.5 bar) (7 bar)
(l/min)
F14
SP
EC
IAL
PU
RP
OS
E
Logical Answer toReduced Clogging ofRecirculated SystemsSpraying Systems Co. newstainless steel manifold systemself-cleans without having to shutdown your system. The unit issupplied with an internal rotatingbrush-type cleaning assemblythat is operated manually byturning an exterior handwheel.The header can also be equippedwith a motor assembly for auto-matic cleaning at preset intervals.
Designed forEfficiencyDuring the cleaning cycle, thebrushes scrub the interior wall of the manifold as well as thenozzle orifice…while continuingto spray. In a matter of seconds,accumulated debris is removedand discharged through theflush-out valve, restoring fullliquid flow to the system withoutcontaminating the sprayedsurface.
The staggered brush sections areinstalled at 120° intervals. Largeflow passages between brushsections minimize pressure losswhile the system operates. Inaddition, there is no brushinterference with the nozzle inletsthat would affect their performancewhen the flush-out valve is in thefull operating position.
Designed forAccuracyThe manifold is fitted with self-aligning disc-type spray nozzles,each secured into perfectalignment by a lock ring. A widerange of flow rates are availablein 0°, 30° and 60° spray angles.Nozzle spacing is determined bythe spray angle and distance tothe impact area. Each manifoldis custom designed to meet yourspecific requirements.
Self-CleaningManifold SystemTHREE VERSIONS AVAILABLE
AUTOMATICBRUSH VERSION
BRUSHLESSVERSION
MANUALBRUSH VERSION
DESIGN FEATURES
STOP NOZZLE PLUGGING
F15
SP
EC
IAL
PU
RP
OS
E
Designed for FlexibilityYou can custom order just theheader system with disc-typenozzles without a brush assemblyif you’re looking for a qualityheader replacement. And later,you can add the self-cleaningbrush-type assembly should theneed arise.
The brushless type manifold canalso be equipped with the model20235 and 20210 self-cleaningnozzles (see page F7).
Designed for RetrofittingThe new manifold system retrofitsmost existing header systems.For example, the flanged, multi-position flush-out valve is easilypositioned in 90° increments forconvenient hose connection. It isnot a welded housing.
Manifold diameters from 11⁄2) to6) are available in lengths asrequired, and will supportpressures to 750 psi (52 bar).Elbows, flanges, hose adapters,and a variety of mounting optionsare available in many sizes…and may be specified for the inletas well as the outlet connection.
Ask your local sales represen-tative for options.
PERFORMANCE DATA
ⓦ Paper making
ⓦ Pulpwood preparation
ⓦ Sludge dewatering
ⓦ Parts washing
ⓦ Other manifold operations where clogging is a problem
To order, contact your localSpraying Systems Co. sales office for assistance.
Minimum Water Pressure – 1.5 bar
Clogging-type particles are effectively flushed out of the system, as shown in thislab demonstration.
The automatic brush-typeheader timing control is housedin a 20"x20"x12" (50x50x30 cm)NEMA fiberglass control box.Controls consist of a lightedpush button (cycle start), andlighted pull button (cycle stop).The drive system is a three phase,230 volt AC, IP 65 reversiblemotor. Cleaning cycles can bepreset at intervals of 15 minutesto approximately 100 hours.
ORDERING INFORMATIONCOMMON APPLICATIONS
Spray Angle Nozzle Orifice CAPACITY in gallons per minuteat 60 psi (4 bar) Size No. Diam.
in. 40 psi 60 psi 100 psi 250 psi 750 psi
00004 0.016 0.04 0.05 0.06 0.10 0.1700007 0.024 0.07 0.09 0.11 0.18 0.3000009 0.028 0.09 0.11 0.14 0.23 0.390001 0.031 0.13 0.16 0.21 0.33 0.56
0° 0002 0.039 0.23 0.28 0.36 0.58 1.000003 0.047 0.33 0.40 0.52 0.83 1.430004 0.059 0.43 0.53 0.68 1.08 1.860008 0.079 0.79 0.97 1.25 1.98 3.420012 0.099 1.24 1.52 1.96 3.10 5.370020 0.118 1.98 2.43 3.13 4.95 8.573002 0.039 0.23 0.28 0.36 0.58 1.003003 0.047 0.33 0.40 0.52 0.83 1.433004 0.059 0.43 0.53 0.68 1.08 1.863006 0.071 0.61 0.75 0.96 1.53 2.64
30° 3008 0.079 0.79 0.97 1.25 1.98 3.423010 0.089 1.02 1.25 1.61 2.55 4.423012 0.099 1.24 1.52 1.96 3.10 5.373016 0.110 1.61 1.97 2.55 4.03 6.973020 0.118 1.98 2.43 3.13 4.95 8.576002 0.039 0.23 0.28 0.36 0.58 1.006003 0.047 0.33 0.40 0.52 0.83 1.436004 0.059 0.43 0.53 0.68 1.08 1.866006 0.071 0.61 0.75 0.96 1.53 2.646008 0.079 0.79 0.97 1.25 1.98 3.426010 0.089 1.02 1.25 1.61 2.55 4.426012 0.099 1.24 1.52 1.96 3.10 5.376016 0.110 1.61 1.97 2.55 4.03 6.97
60° 6020 0.118 1.98 2.43 3.13 4.95 8.576025 0.138 2.56 3.14 4.05 6.40 11.096031 0.157 3.14 3.85 4.96 7.85 13.606040 0.177 4.03 4.94 6.37 10.08 17.456049 0.197 4.91 6.01 7.76 12.28 21.266078 0.236 7.85 9.62 12.41 19.63 33.996099 0.276 9.88 12.10 15.62 24.70 42.78
60124 0.315 12.41 15.20 19.62 31.03 53.74
F16
SP
EC
IAL
PU
RP
OS
E
DESIGN FEATURES
Moisturizing/coating headerVARIABLE SPRAY ATOMIZATION AND DISTRIBUTION CONTROL
Note: VAU nozzles are available for otherapplications and can be orderedseparately. (See page D24)
Spraying Systems’ moisturizingheader can be fine-tuned foraccurate, uniform spraydistribution across the contactarea.
The pressures for the headeratomizing air, fan air, and liquidfeed lines are adjustedindependently of each other.This allows exceptional controlof the drop sizes and spraypattern.
The clean-out needle in theVAU nozzles is activated whenliquid flow is shut-off, virtuallyeliminating clogged orifices.This, and an additonalinlet/outlet port for recirculatingflow, make the header ideal forspraying viscous liquids as well.
A protective stainless steelcabinet houses the nozzles, airand liquid lines. Hinged coversprovide easy access to theinterior head assembly. Anoptional mounting assemblypermits rotation of the header foradditional access convenience.
Choose from seven set-upsThe VAU nozzles can be fittedwith any of seven different sprayset-ups, providing flow ratesfrom 0.74 gph (2.8 l/h) to 47 gph(179 l/h). All inlet connectionsare !\°" NPT or BSPT (F). Wettedparts are made of stainless steelwith a TEFLON packing cup andTEFLON-coated VITON Quadrings. Automatic “on/off”operation up to 180 cycles perminute. Minimum of 35 psi (2.4 bar) air pressure foroperation of air cylinder.
Hinged cover for easy accessMaintenance of the interiorheader assembly is quick andeasy. Air and liquid lines areeasily serviced, and the VAUAutoJet nozzles can be quicklyremoved for cleaning or replace-ment.
Engineered for durabilityand ease of maintenance
Fan Air
AtomizedLiquid
Fan Air
F17
SP
EC
IAL
PU
RP
OS
E
DESIGN FEATURESAvailable Spray Set-upsThe chart below gives the datasheet numbers for each of theseven available set-ups. Thesedata sheets are available throughyour local Spraying Systems Co.representative.
The widths (A, B, C) of the flatspray pattern are controlled bythe combination of fan airpressure and atomizing air
pressure. The liquid flow rate isconstant and not affected by theair pressures.
ORDERING INFORMATION
COMMON APPLICATIONSⓦ Coating
ⓦ Moisturizing
ⓦ Spraying viscous liquids
ⓦ Recirculating systems
Spray Set-up No. Data Sheet Number
SUV67B-SSSUV67A-SSSUV67-SS
SUV113A-SSSUV113-SSSUV128-SSSUV152-SS
37459M-V67B37459M-V67A37459M-V67
37459M-V113A37459M-V11337459M-V12837459M-V152
Simple interiordesign
Close-up view of the nozzle’sspray set-up orifices
For ordering information contact yourlocal sales engineering representative.
Liquid capacity (gph)
3 psi 20 psi
.741.12.23.64.91018
1.92.95.69.412.82647
F18
SP
EC
IAL
PU
RP
OS
E
Spraying Systems Co. flowbacklance design provides efficientcooling and conditioning of hotgases by delivering consistentlyfine atomization of liquids. Dropsize is maintained regardless ofchanges in flow rate requirements.This precise control of flowenhances evaporation andimproves system efficiency.
Flowback lances are available in single or multiple orifice spray
head configurations with standardbolt-on or quick release flange-mounted tube assemblies. Thelow cost two-piece nozzle designrequires no special tools allowingeasy removal for cleaning orreplacement.
The flowback nozzle produces a hollow cone spray pattern.Based on a constant inletpressure, the flowback designprovides consistently fine
atomization with infinitelyvariable flow adjustment throughthe 10 to 1 turn down ratio.
A valve on the return line orflowback side of the lance allowsmanual adjustment of the flowrate. Or, if required, by adding a process control package, amotorized valve positioner canbe utilized to offer a flexibleresponse to changes in flowrequirements.
For example, as the gas volumeincreases or decreases, the reg-ulating valve is used to adjustthe flow rate of the nozzle to meetthe changing process require-ments. The unused liquid can bereturned to the reservoir for reuseto help lower operating costs.
FlowbackNOZZLE LANCESFOR GAS CONDITIONING
MULTIPLE ORIFICE SINGLE ORIFICE
DESIGN FEATURES
Gas cooling for cement, steel,and aluminum plants. Aqueousammonia injection for pollutioncontrol or any place where fineatomization and precise fluidcontrol is required.
Contact your local SprayingSystems Co. office for order infor-mation regarding this product.Straight or 45° angle nozzle
lances are available with single ormultiple orifice heads…in lengthsrequired for custom installation.
Each lance can be equipped witha quick release flange andmounting/protective tube orspecial connections.
Lock-pin Mounting Flange
Bolt-on Mounting Flange
LANCE MOUNTING/PROTECTIVE TUBE
SINGLE ORIFICE/STRAIGHT LANCEWITH OPTIONAL GAUGES
MULTIPLE ORIFICE/45° ANGLED LANCE
SINGLE ORIFICE/45° ANGLED LANCEWITH OPTIONAL GAUGES
ORDERING INFORMATIONCOMMON APPLICATIONS
section
FluidlineAccessories
INDEXSplit-Eyelet Connectors ........................................G2
Adjustable Ball Fittings.........................................G3
ValvesCheck, Plug and Rollover ....................................G4Shut-Off ................................................................G5Throttling and Pressure Relief/Regulating...........G6Solenoid ...............................................................G7
Pressure Regulators and Gaugesfor Air and Liquid ...........................................G8, G9
Line Filters for Air .................................................G10
Liquid StrainersLow-Medium Pressure
Up to 6) Connection .............................G11, G12Low-Medium Pressure
Up to 21⁄2) Connection..................G13, G14, G15High Pressure
Up to 1) Connection ......................................G16
Swivel Connectors ..............................................G16
Quick Couplers ....................................................G16
Tank Mixing Eductor ...........................................G16
G
Pressure: 250 psi (17 bar)
Clamp size: 1⁄2) - 1"
Outlet Conn.: 1⁄8), 1⁄4) NPT or BSPT (F)
125 psi (9 bar)
11⁄4) - 2"1⁄8), 1⁄4), 3⁄8), 1⁄2) NPT or BSPT (F)
125 psi (9 bar)
21⁄2) - 4"1⁄4), 3⁄8), 1⁄2), 3⁄4),1" NPT or BSPT (F)
1000 psi (70 bar)1⁄2) - 1"
1⁄8), 1⁄4) NPT or BSPT (F)
forconnecting
gauges
for mountingnozzles
forconnecting
hoses
G2
FLU
IDLIN
E A
CC
ES
SO
RIE
S
7521 8370 15475 12521
Split-Eyelet connectors provide afast and economical way ofinstalling nozzles and otherfittings in piping systems. Simplydrill the specified diameter hole,slip the split eyelet connectoraround the pipe and tighten theclamp bolts to lock in place. Thisunique design reduces costs by
eliminating cutting, threading,and brazing operations. It canalso be used to reinstall nozzlesin thread stripped manifolds.
Connector bodies are machinedfrom bar stock with a choice ofoutlet connection sizes. Thedesign prevents body rotation
within the flange if nozzles mustbe removed or installed after theconnector is in place. The bodyinlet extends high into the pipe toretard entry of sediment andminimize clogging. The Buna-Nclamp gasket is resistant to mostmaterials, and provides a leak-proof seal.
Based on largest/heaviest version of each type.
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
ⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦⓦ
Split-EyeletConnector
No.
7521
12521
8370
15475
TO CLAMP ONOUTLET
CONNECTIONNPT or BSPT
CONST.MATERIALS B
Dia. ofHole to
be drilled
CBodyInletDia.
DIMENSIONS
PipeSize
Inches
Q\„
E\‰
1Q\„
E\‰
11Q\‰
1Q\„
22Q\„
34
Q\ˆ Q\‰
Q\ˆ Q\‰
Q\ˆ Q\‰
Q\ˆ Q\‰
Q\ˆ Q\‰
Q\ˆ Q\‰
Q\ˆ Q\‰ E\ˆ Q\„
Q\ˆ Q\‰ E\ˆ Q\„
Q\ˆ Q\‰ E\ˆ Q\„
Q\‰ E\ˆ Q\„ E\‰ 1Q\‰ E\ˆ Q\„ E\‰ 1Q\‰ E\ˆ Q\„ E\‰ 1
A* B* C*
*A — Zinc-plated steel clamps and bolts with brass connector body.*B — Stainless steel throughout.*C — Zinc-plated steel clamps and bolts with stainless steel connector body.
8370 A - 1-1/4 x 1/4Split-Eyelet
ConnectorType
MaterialCode
OutletConnection
Size NPT or
BSPT (F)
ClampSize
DESIGN FEATURES
COMMON APPLICATIONSDIMENSIONS & WEIGHTS
ORDERING INFORMATION
Split-EyeletCONNECTORS
Max.Pressure
psi
1U\ˆ"
250 3.5 2Q\ˆ" O\´„" E\ŒÁ" QQ\ŒÁ" .132Q\‰"
1U\ˆ"
1,000 7 2Q\ˆ" WQ\Á‰" E\ŒÁ" QQ\ŒÁ" .132Q\‰"
2E\‰"U\ŒÁ" or125 5.5-20 3E\ŒÁ" QQ\ŒÁ"O\ŒÁ"
WT\´„" .383QT\´„"
4WQ\´„"WE\´„"125 10-54 5E\ˆ" 1Q\‰" thru 1"
1Q\´„" 1.56U\ŒÁ"
**Capac-ity atMax.
pressuregpm
A D
NetWeight
lbs.Outside
Dia. Tubing
QE\ŒÁ", U\ˆ"1", 1Q\ŒÁ"
1Q\ˆ", 1Q\‰", 1E\ˆ"
QE\ŒÁ", U\ˆ"1", 1Q\ŒÁ"
1Q\ˆ", 1Q\‰", 1E\ˆ"
1O\ŒÁ", 1QQ\ŒÁ"
1E\‰", 2"
2Q\ˆ", 2E\ˆ"
2Q\„", 2U\ˆ"
3", 3Q\„"
4", 4Q\„"
Q\ˆ"
Q\‰"
E\ˆ"
Q\„"
E\‰"
1"
5.51015203354
21385776125204
**Capacity of 8370 and 15475varies with outlet conn.
CapacityOutletConn. gpm l/min
1⁄8M 1⁄8F 36275-1⁄8 x 1⁄8 Brass1⁄8M 1⁄8F 36275-1⁄8 x 1⁄8-SS St. Steel 13⁄8 31⁄32 2
1⁄4M 1⁄4F 36275-1⁄4 x 1⁄4 Brass1⁄4M 1⁄4F 36275-1⁄4 x 1⁄4-SS St. Steel 19⁄16 13⁄32
45°3
3⁄8M 3⁄8F 36275-3⁄8 x 3⁄8 Brass3⁄8M 3⁄8F 36275-3⁄8 x 3⁄8-SS St. Steel 125⁄32 13⁄8 5.5
1⁄2M 1⁄2F 36275-1⁄2 x 1⁄2 Brass1⁄2M 1⁄2F 36275-1⁄2 x 1⁄2-SS St. Steel 27⁄32 121⁄32 10
3⁄4M 3⁄4F 36275-3⁄4 x 3⁄4 Brass3⁄4M 3⁄4F 36275-3⁄4 x 3⁄4-SS St. Steel 213⁄32 129⁄32 17
AdjustableBALL FITTINGS
G3
FLU
IDLIN
E A
CC
ES
SO
RIE
S
CASTCAST36275male inlet, female outlet
1⁄8)- 3⁄4) NPT or BSPTmale inlet, female outlet1)- 11⁄2) NPT or BSPT
male inlet, male outlet11⁄4)- 21⁄2) NPT or BSPT
InletPipe
Conn.NPT orBSPT
OutletPipe
Conn.NPT orBSPT
AdjustableBall FittingOrdering
No.
TypeFlanges
TotalIncludedAngle of
Adjustment
DIMENSIONS
Adjustable ball fittings provideadjustable positioning of spraynozzles for more exact control of spray direction. They permitaccurate pipe alignment andconvenient nozzle positioningwithout disturbing pipeconnections. Adjustable ballfittings are available in a widerange of pipe connections. Theyfeature large internal passages
to minimize clogging and smoothfinished sealing surfaces toassure leakproof connections.
The machined-type ball fittingfeatures a lock ring that holdsthe nozzle in position whenjarred or subjected to vibration.The fitting has a relatively smalldiameter for applications requir-ing a compact size. Its maximum
pressure rating is 300 psi (21 bar).Nozzle removal for cleaning andreadjustment is quick and simple.
Cast-type fittings feature lockingscrews that hold the nozzle inposition when jarred or subjectedto vibration. They are rated forpressures up to 125 psi (9 bar).
1 x 1 - SSInlet
ConnectionSize
OutletConnection
Size
MaterialCode
DIMENSIONS & WEIGHTS
DESIGN FEATURES
COMMON APPLICATIONS
MATERIAL CODE ORDERING INFORMATION36275 Type
no material code = Brass
SS = 303 Stainless Steel
Cast Type
no material code = Brass
I = Cast Iron
SS = 303 Stainless Steel and Cast 316 Stainless Steel
45° TOTAL INCLUDED ANGLE OF
ADJUSTMENTIN ANY DIRECTION
INLET CONN.NPT (M) ORBSPT (M)
OUTLET CONN.NPT (F) ORBSPT (F)
OUTLETCONN.
CAST FLANGE
INLET CONN.
To positionspray nozzlepattern
For pipealignment
1M 1F 1 x 1 CAST 31⁄2 113⁄16 40° 411/4M 11/4F 11/4 x 11/4 female outlet 51⁄8 113⁄16 40° 43⁄411/2M 11/4F 11/2 x 11/4 type 51⁄4 113⁄16 40° 511/4M 11/4M 11/4 x 11/4M 51⁄8 113⁄16 40° 43⁄411/4M 11/2M 11/4 x 11/2M CAST 51⁄8 113⁄16 40° 43⁄411/2M 11/2M 11/2 x 11/2M male outlet 51⁄8 113⁄16 40° 5
2M 2M 2 x 2M type 81⁄4 31⁄8 40° 1821/2M 21/2M 21/2 x 21/2M 9 31⁄8 40° 191⁄2
NetWeight
lbs.
AOverallLengthinches
Binches
InletPipe
Conn.NPT orBSPT
OutletPipe
Conn.NPT orBSPT
AdjustableBall FittingOrdering
No.
Material
TotalIncludedAngle of
Adjustment
NetWeight
oz.
DIMENSIONSA
OverallLengthinches
Binches
Call for availability of reducing sizes.
45°
Valves
G4
FLU
IDLIN
E A
CC
ES
SO
RIE
S
CHECK
The versatile in-line plug valvefeatures a brass body with aone-piece CELCON plug/handle.Shut-off is quick and easy. Asimple 90° rotation of the leveractuates the on/off position. Thevalve can also be actuated byusing a hex allen wrench in thehex opening at the tip of thelever. Several models are avail-able to accommodate variousthread combinations…at maxi-mum operating pressure of 400psi (27 bar). Write for DataSheet 23220.
This useful accessory permitsquick switch-over between twonozzles. Liquid flow is dispersedfrom one outlet, with a standbynozzle in the second outlet. Toswitch nozzles, flow must be shut-off before the second or standbynozzle can be rotated 180° intothe liquid outlet portion. Ideal forsystems that need frequentcleaning, or where two differentspray patterns may be used in the system. Three inlet connectionsare available; a swivel connectionthat permits positioning of thespray direction or fixed !\›" male orfemale inlet connections. Write forData Sheet 23830-1.
DESIGN FEATURES
DESIGN FEATURES DESIGN FEATURES
ORDERING INFORMATIONORDERING INFORMATION ORDERING INFORMATION ORDERING INFORMATION
ROLLOVERPLUG
AB
10742A
BB
12328
23220 23830
SWIVELPART NO. INLET CONN.23830 QQ\ŒÁ" - 16 (F)
PART NO. INLET CONN.NPT or BSPT
23830-1⁄4 M Q\‰" (M)23830-1⁄4 F Q\‰" (F)
23220-1⁄4F x 1⁄4FPlugValve
23830-1⁄4M PartNo.
ball type1⁄8"-1⁄4" NPT or BSPT
Write for Data Sheet 15664.
ball type1⁄4" NPT or BSPT
Write for Data Sheet 3936.
diaphragm type1⁄4" NPT or BSPT
diaphragm type1⁄2"-3⁄4" NPT or BSPT
Check valves are installed withspray nozzles to provide positivedrip-free shut-off, and to maintainline pressure during on-and-offspraying cycles.
AB and BB series spring-loadedball type check valves are avail-able with brass or stainless steelbodies and a stainless steel balland spring. They operate atpressures up to 125 psi (9 bar)and feature a choice of 5, 10, or20 psi rated (0.35, 0.7 or 1.4 bar)springs. AB series check valvesare supplied with a !\°" or !\›" NPTor BSPT male inlet and femaleoutlet. BB series check valvesare supplied with a !\›" NPT orBSPT male inlet and male outlet.The maximum flow rate is 2 gpm
(8 l/min) for AB and .5 gpm (2l/min) for the BB.
10742A and 12328 seriesspring-loaded diaphragm typecheck valves offer the importantadvantage of line flows withoutpressure drop through the valve.They have an opening pressureof 7 psi (0.5 bar) and are notaffected by vibrations or otherexternal disturbances. 10742series brass check valves offer!\›" NPT or BSPT connectionsand flow rates to 2 gpm (8 l/min)while 12328 series valves offer!\¤" or #\›" NPT or BSPT connec-tions and flow rates to 15 gpm(57 l/min). Materials are nylonwith CELCON bonnet.
BALL TYPECHECK VALVES
1/8 AB - SS 20CheckValveType
SpringRating(psi)
MaterialCode
Inlet/OutletConnection
Size
DIAPHRAGMCHECK VALVE
12328 - 1/2 - ALInlet/OutletConnection
Size (Type 12328 only)
MaterialCode
DiaphragmCheck
Valve Type
Material Codes
no material code = Brass
AL = Aluminum
NY = Nylon (12328 only)
All outlet connections QQ\ŒÁ"-16 (M).
23220-1⁄4F x 1⁄4F23220-1⁄8F x 1⁄8F
23220-1⁄4M x T
23220-1⁄4F x T
23220-1⁄4M x 1⁄4F
23220-1⁄4F x 1⁄4M
23830(with swivel connection)
23830-1⁄4M(with male thread inlet)
23830-1⁄4F(with female thread inlet)
ValvesSHUT-OFF
G5
FLU
IDLIN
E A
CC
ES
SO
RIE
S
AA344M ball valves feature aheavy-duty reinforced nylonbody with a polypropylene balland TEFLON seals. They providea simple method of controllingliquid flows. The AA344M installsquickly and is designed for easymaintenance. Special 3-piece construction allowsremoval of the valve body with-out disturbing pipe connections.
Model AA344M-2 providespositive on-off control with a !\› turn of the handle. ModelAA344M-3 diverts flow to eitheroutlet and does not shut off.
AA344M ball valves operate atpressures up to 300 psi (21 bar).Their full-port design providesunrestricted flow with minimalpressure drop when wide open.Write for Data Sheets 344M-2and 344M-3.
AA343M-PP ball valves easilyinstall in systems. They aredesigned for ease of assembly
and disassembly and offer excel-lent corrosion resistance. Allwetted parts are glass-reinforcedpolypropylene, TEFLON,polypropylene or VITON.
AA343M-PP ball valves operateat pressures up to 150 psi (10 bar).MODEL AA343M-2-PP providescomplete shut-off to full flow withjust a quarter turn of the handle.Model AA343M-3-PP divertsflow to either outlet and offers noshut-off. Write for Data Sheets343M-2-PP and 343M-3-PP
The AA344M-PP manually operated ball valves have amaximum operating pressure of125 psi (8 bar). Their full-portdesign provides unrestricted flowwith minimal pressure dropwhen fully open.
The AA344M-PP valves offerexcellent corrosion resistanceand easy installation. Valve bodyremoval is simple because ofspecial 3-piece construction, with-out disturbing pipe connections.Write for Data Sheet 344M-2-PP.
Model AA344M-2-PP providespositive on-off control. ModelAA344M-3-PP offers no shut-offand diverts flow to either outlet.
The 346M-PP manually operatedball valves offer pipe connectionsof 1!\›" or 1!\¤" NPT or BSPT(female), and have a maximumpressure rating of 125 psi (8 bar).Their special 3-piece constructionmakes them easy to servicewithout disturbing pipe connec-tions. Their polypropylene con-struction offers excellent corrosionresistance and durability.
The AA346M-2-PP provides forshut-off to full flow with a !\› turnof the handle. The AA346-3-PPmodel does not shut off butdiverts the flow to either outlet.Write for Data Sheets 346M-2-PPand 346M-3-PP.
344M 20900344M-PP343M-PP 346M-PPon-off or flow
diverting ball type3⁄8"-1⁄2" NPT or BSPT (F)
on-off or flowdiverting ball type
3⁄4"-1" NPT or BSPT (F)
on-off or flowdiverting ball type
11⁄4"-11⁄2" NPT or BSPT (F)
on-off or flowdiverting ball type
3⁄4"-1" NPT or BSPT (F)
on-off ball type1⁄4" NPT or BSPT
Model No. Inlet & Outlet Conn. NPT or BSPT (F)
AA344M-2-3/4 E\‰"AA344M-2-1 1"AA344M-3-3/4 E\‰" AA344M-3-1 1"
Model No. Inlet & Outlet Conn.NPT or BSPT (F)
AA344M-PP-2-3/4 E\‰" AA344M-PP-3-3/4 E\‰" AA344M-PP-2-1 1"AA344M-PP-3-1 1"
Model No. Inlet & Outlet Conn.NPT or BSPT (F)
AA346M-PP-2-11⁄4 1Q\‰"AA346M-PP-3-11⁄4 1Q\‰" AA346M-PP-2-11⁄2 1Q\„"AA346M-PP-3-11⁄2 1Q\„"
Model No. Inlet & Outlet Conn.NPT or BSPT (F)
AA343M-PP-2-3/8 E\ˆ" AA343M-PP-3-3/8 E\ˆ" AA343M-PP-2-1/2 Q\„" AA343M-PP-3-1/2 Q\„"
Ball Valve No. Connections
20900-1⁄4M x T Q\‰" NPT (M) xQQ\ŒÁ" - 16 (M)
20900-1⁄4F x T Q\‰" NPT (F) xQQ\ŒÁ" - 16 (M)
Model 20900
20900 - 1/4 F x TBall
Valve TypeInlet
ConnectionType
DESIGN FEATURES
ORDERING INFORMATION
DESIGN FEATURES
ORDERING INFORMATIONFor 300 Series Valves
AA 344M - 2 - 3/4 Ball
Valve TypeNumber of
ConnectionsInlet/OutletConnection
Size
Type 20900 UniJet ball valvesprovide on-off control for individ-ual nozzles. They feature a !\›"NPT or BSPT (male or female)inlet connection. Outletconnections are !!\⁄fl"-16 malethread for use with UniJet tipretainers and adapters.
Brass body construction withstainless steel ball, pressures upto 400 psi (28 bar). Write forData Sheet 20900.
ValvesPRESSURE RELIEF/REGULATING VALVE
G6
FLU
IDLIN
E A
CC
ES
SO
RIE
S
THROTTLING
23520-PP 23120-PP 68158460 9840 110
DESIGN FEATURES DESIGN FEATURES PERFORMANCE DATAModel 23520-PP Throttling valveis for regulating flow in systemsequipped with centrifugal pumpswhere flow regulation is required.The Model 23520-PP offerscompact size and polypropyleneconstruction for excellent chemicalresistance. The adjusting capvaries flow through the valvewhile engagement of the lockring maintains the setting.
Model 23520-PP offers maximumpressure of 150 psi (10.4 bar),and !\¤) and #\›) NPT or BSPTconnections. Write For DataSheets 23520-!\¤ and 23520-#\›.
Model 23120-PP pressure reliefvalve is constructed of polypro-pylene with a nylon adjusting capfor excellent chemical resistance.The valve is adjustable by handto maintain control of line pressureat any pressure within the valveoperating range. The selectedpressure setting is firmly held inplace by the locknut.
The Model 23120-PP offers !\¤)or #\›) NPT or BSPT (M) inlet and (F) outlet connections. Thevalve can handle pressures upto 150 psi (10.4 bar). It comeswith a !\›) NPT or BSPT (F) portfor pressure gauge connection.Write for Data Sheet 23120.
These adjustable pressure reliefvalves accurately control sprayline pressures at desired settings.Liquid waste caused by exces-sive pressures is minimized asexcessive liquid is bypassed backto the liquid source or pump inlet.
Model 8460 pressure reliefvalves offer a diaphragm designin !\¤) or #\›) pipe sizes with oper-ating pressures to 300 psi (20bar). They have an aluminumhousing and a nylon inlet body.A FAIRPRENE diaphragm sealsoff all working parts from contactwith the liquid and providesresponsive, chatter-free operation.These valves also feature a portfor pressure gauge installation.Write for Data Sheet 8460-I.
Model 9840 diaphragm reliefvalves offer a design similar toModel 8460. Construction of theinlet body is of brass, aluminum,or ductile iron. Write for DataSheet 9840.
Model 6815 piston type pressurerelief valves are available in !\¤)or #\›) pipe sizes with operatingpressures to 1200 psi (85 bar). An extra large valve passage provides full flow through thevalve passage with minimumpressure loss. A free floating seatdesign improves overall speedand sensitivity of the valve action.Write for Data Sheet 6815.
Model 110 pressure relief valvesoffer a piston type design in achoice of pipe connection sizes,with operating pressures up to1000 psi (70 bar). An extra largevalve passage provides full flowwith minimum pressure loss. Aguide vane type seat stabilizesflow through the valve to reducechatter. The valve bonnet iseasily removed for servicewithout disturbing the fluid lineconnections. Write for DataSheets 11826, 13154, 14706,14706-2, and 19697.
Inlet & OverallRecommended Outlet Pipe Length Net
Valve No. Pressure Conn. NPT Material in inches WeightRange or BSPT (Approx.) (lbs.)
23520-1⁄2-PPUp to 150 psi
1⁄2 Nylon, 302 S.S. 37⁄8).14
23520-3⁄4-PP 3⁄4 Polypropylene 43⁄8)
23120-1⁄2-PPUp to 150 psi
1⁄2 Nylon, 302 S.S. 51⁄4) .3523120-3⁄4-PP 3⁄4 Polypropylene
8460-1⁄2-300Up to 300 psi
1⁄2 Nylon and 8) .98460-3⁄4-300 3⁄4 Aluminum
9840-1⁄2Up to 300 psi
1⁄2 Brass and81⁄2) 2
9840-3⁄4 3⁄4 Aluminum
9840-1⁄2-ALUp to 300 psi
1⁄2Aluminum 81⁄2) 1
9840-3⁄4-AL 3⁄49840-1⁄2-DI
Up to 300 psi1⁄2 Ductile Iron
81⁄2) 29840-3⁄4-DI 3⁄4 and Aluminum
6815-1⁄2-50 Up to 50 psi6815-1⁄2-300 Up to 300 psi Brass6815-1⁄2-700 300 to 700 psi 1⁄2 65⁄8) 11⁄4
6815-1⁄2-HSS-1200 700 to 1200 psiBrass and
Hardened S.S.
6815-3⁄4-50 Up to 50 psi6815-3⁄4-300 Up to 300 psi Brass6815-3⁄4-700 300 to 700 psi 3⁄4 65⁄8) 11⁄4
6815-3⁄4-HSS-1200 700 to 1200 psiBrass and
Hardened S.S.
6815-1⁄2-AL-50 Up to 50 psi6815-1⁄2-AL-300 Up to 300 psi 1⁄2 Aluminum 65⁄8) 1⁄26815-1⁄2-AL-700 300 to 700 psi6815-3⁄4-AL-50 Up to 50 psi6815-3⁄4-AL-300 Up to 300 psi 3⁄4 Aluminum 65⁄8) 1⁄26815-3⁄4-AL-700 300 to 700 psi
110-1⁄4-300 Up to 300 psi110-1⁄4-700 300 to 700 psi 1⁄4 Brass 4) .4110-1⁄4-1000 700 to 1000 psi110-3⁄8-300 Up to 300 psi110-3⁄8-700 300 to 700 psi 3⁄8 Brass 4) .4110-3⁄8-1000 700 to 1000 psi
110-1 1 71⁄4) 23⁄4110-11⁄4 Up to 150 psi 11⁄4 Brass 71⁄2) 3110-11⁄2 11⁄2 73⁄4) 4110-1-AL 1 71⁄4) 11⁄4110-11⁄4-AL Up to 150 psi 11⁄4 Aluminum 71⁄2) 11⁄2110-11⁄2-AL 11⁄2 73⁄4) 13⁄4110-1-DI 1 71⁄4) 21⁄2110-11⁄4-DI Up to 150 psi 11⁄4 Ductile 71⁄2) 23⁄4110-11⁄2-DI 11⁄2
Iron73⁄4) 31⁄2
* For maximum pressures for coils “C” and “D”, write for Data Sheet 11438-SOLENOID (1).** For use of Cv factor, write for Data Sheet 11438-SOLENOID (2).
ValvesSOLENOID
G7
FLU
IDLIN
E A
CC
ES
SO
RIE
S
PERFORMANCE DATA DIMENSIONS
STANDARD ASSEMBLY
DESIGN FEATURESSpraying Systems’ solenoidvalves are designed for automat-ically operated systems requiringon-off flow. They are normallyclosed and are designed to givedependable service in both airand liquid lines within thetemperature ranges of 40°F to165°F (5°C to 75°C).
Ten watt, class “F” coils are forcontinuous duty, and are UL andCSA approved. Ambient operatingtemperatures range from 15°F to122°F (-10°C to 50°C).
The coils are rated for dualfrequency operation suitable forinternational use. The coil isencapsulated in a moldingcompound to resist highhumidity and fungus growth.
The enclosure can be rotated 360°and is electrostatically powder-coated for durability. It includes a1⁄2) NPT connection.
The solenoid valve bodies areavailable in stainless steel orbrass as shown below. For highvelocity flow, a stainless steel
pilot orifice helps eliminatepremature leaking and increasesservice life. Kel-F or VITONseals are molded into stainlesssteel floating bottom plungers.The floating plungers automat-ically compensate for vibration,shock, wear, and deformation,providing a bubble-tight seal.Buna-N material is used withdiaphragm valves.
The solenoid valves can bemounted in any position and aredirect pipe mounted. Additionalbottom mounting is provided onmodels 11438-20, -21, and -22by two 10-24 tapped holes.
The valve action within thesemodels is either diaphragm, pilotoperated diaphragm, or directacting poppet.
For additional solenoid flow orcapacity information, request DataSheet 11438-SOLENOID (1), (2).
When ordering solenoid valvesplease specify which type of coilyou require. If number alone(example: 11438-20) is shown itcomes with 110-120 Volt, 50/60Hz coil. If other coil assembliesare required, include a letterafter the solenoid number
(example: 11438-20A). Thefollowing letters representdifferent coil assemblies.
A = 220-240 Volt, 50/60 HzB = 24 Volt, 60 HzC = 12 VDCD = 24 VDC
2-Way Valve 3-Way Valve
See charts below for specific model no.
See charts below for specific model no.
2-WAY 3-WAY
Type of
Valve
ModelNumber
Port Conn.
NPT (F)
BodyMaterial
SealMaterial
ValveAction
Max.Pressure
psi
OrificeSize
**CvFactor
Two Way
ThreeWay
11438-20
11438-21
11438-22
11438-23
11438-24
11438-25
11438-30
11438-31
1⁄4)
1⁄4)
3⁄8)
1⁄2)
3⁄4)
1)
1⁄4)
1⁄2)
StainlessSteel
Forgedor CastBrass
Forgedor CastBrass
VITON
Kel-F
Buna-N
VITON
Buna-N
DirectActingPoppet
Pilot-OperatedDiaph.
Poppet
Diaph.
60*
205*
150*
230
100
150
3⁄16)
1⁄8)
7⁄16)
5⁄8)
3⁄4)
1)
3⁄32)
1⁄2)
.50
.28
2.5
4.0
7.8
13
.25/.38
3.6
Type of Valve
ModelNumber W X Y Z
TwoWay
ThreeWay
11438-2011438-21
11438-22
11438-23
11438-2411438-25
11438-30
11438-31
15⁄8)
131⁄32)
221⁄32)
315⁄16)
19⁄16)
33⁄32)
229⁄32)
39⁄16)
413⁄32)
43⁄4)
33⁄4)
55⁄8)
115⁄16)
219⁄32)
313⁄32)
323⁄32)
23⁄4)
35⁄32)
11⁄32)
19⁄32)
17⁄32)
7⁄8)
11⁄8)
11⁄16)
Main GaugeRegulator Ports Ports BodyOrder Number NPT (F) NPT (F) Material
11438-45 1⁄4) 1⁄4) Zinc11438-45S 1⁄4) 1⁄8) 316 Stainless Steel11438-46 3⁄8) 1⁄4) Zinc11438-47 1⁄2) 1⁄4) Zinc11438-47S 1⁄2) 1⁄4) 316 Stainless Steel11438-48 3⁄4) 1⁄4) Aluminum11438-49 1) 1⁄4) Aluminum
Main GaugeRegulator Ports Ports BodyOrder Number NPT (F) NPT (F) Material
11438-35 1⁄4) 1⁄4) Zinc11438-36 3⁄8) 1⁄4) Zinc11438-37 1⁄2) 1⁄4) Zinc11438-38 3⁄4) 1⁄4) Aluminum11438-39 1) 1⁄4) Aluminum
Pressure RegulatorsFOR AIR
G8
FLU
IDLIN
E A
CC
ES
SO
RIE
S
DESIGN FEATURES
PERFORMANCE DATA
DIMENSIONS
ModelNo.
11438-3511438-3611438-4511438-4611438-3711438-4711438-3811438-3911438-4811438-4911438-45S11438-47S
DIMENSIONS
These air pressure regulatorsare diaphragm type regulatorswith a balanced valve design.They come in two styles:relieving and non-relieving. Therelieving style automaticallyrelieves excessive pressure in aregulated air line, and evenwhen the line is dead-ended itallows the regulated linepressure to be reduced with theregulator adjusting knob. The
non-relieving style requiressome other means of relief toreduce trapped pressure.
The materials of construction for the bodies and bonnets arediecast aluminum, zinc orstainless steel. The stainlesssteel versions meet NACEstandard MR-01-75 for corrosionresistance.
They can be used with supplyline pressures up to 300 psi (20
bar) and regulate pressure from5 to 125 psi (0.3 to 8.5 bar).
Design operating temperaturerange maximums are 0° to 175°F(-15° to 80°C) with dewpoint less than air temperature below35°F (2°C).
Gauges are supplied separately.
Note: Model 11438-45S has thesame flow limitations as a stan-dard !\°" NPT port regulating valve.
RELIEVING TYPE
NON-RELIEVING TYPE
11438-**** See charts below for
specific model no.
Non-Relieving TypeLiquid pressure
regulator with gauge
Strainer-liquid
Air filter
Air filter
Relieving TypeAir pressure regulator
with gauge
2-way valve for controlof atomizing air line
(optional)Atomizing air line
1⁄4) pipe
1⁄4) JAUSprayNozzle
Liquid line1⁄4) pipe
Cylinder air line1⁄8) pipe
3-way valve for aircylinder control
A B C D EDia.
3QQ\ŒÁ"
4E\ˆ"
4Q\„"
2E\ˆ"
6E\ŒÁ"
1U\ŒÁ"
1Q\„"
2E\ˆ"
E\ˆ"
1T\ˆ"
5Q\ˆ"
5U\ˆ"
6U\ˆ"
2E\‰"
7QE\ŒÁ"
23⁄4"
3Q\„"
4Q\‰"
1Q\„"
3Q\„"
2"
2Q\‰"
2Q\‰"
1Q\„"
2Q\‰"
The model 26385 pressuregauge offers stable, accurateneedle readings up to the ratedmaximum pressure. Elevenbottom inlet models are availablefrom maximum 60 psi to maxi-mum 3000 psi (4.2 to 207 bar).
The gauge features a patentedspring suspended movement,protected by a corrosion andimpact-resistant 2!\¤" diameterABS housing with polycarbonatewindow. All wetted parts are brass,with a combination brass/bronzeconnection and bourdon tube.
Features !\›" NPT (M) bottominlet. Grade B accuracy within ± 2% in the middle 50% of thescale, with 3% accuracy in thehigh and low ends of the scale.Includes dual scales in psi andbar.
Models 26383-1⁄8 - - and 26383-1⁄4 - - have the same basicmechanical design as model26385 but feature a center backconnection with NPT pipeconnections in !\°" or !\›" sizes.These gauges are housed in a2" diameter ABS case.
These liquid pressure regulatorsare non-relieving diaphragm typeregulators.
They are made with bodies ofbrass, brass-plated zinc, orstainless steel. The stainless steelversions meet NACE standardMR-01-75 for corrosion resistance.
Main GaugeRegulator Ports Ports BodyOrder Number NPT (F) NPT (F) Material
11438-250 1⁄4) 1⁄4) Brass11438-250S 1⁄4) 1⁄8) 316 Stainless Steel11438-251 3⁄8) 1⁄4) Brass11438-252 1⁄2) 1⁄4) Brass11438-252S 1⁄2) 1⁄4) 316 Stainless Steel11438-253 3⁄4) 1⁄8) Brass11438-254 1) 1⁄8) Brass
11438-25011438-25111438-25211438-25311438-25411438-250S11438-252S
26383-Q\ˆ-60 Q\ˆ" 0-60
26383-Q\‰-60 Q\‰" 0-60
26383-Q\ˆ-100 Q\ˆ" 0-100
26383-Q\‰-100 Q\‰" 0-100
26383-Q\ˆ-160 Q\ˆ" 0-160
26383-Q\‰-160 Q\‰" 0-160
ModelNo.
NPT(M)
Conn.
PressureRange psi
G9
FLU
IDLIN
E A
CC
ES
SO
RIE
S
Pressure RegulatorsFOR LIQUID
Pressure Gauges
26385
The regulators can be used withprimary supply line pressures up to 250 psi (15 bar) for Model11438-250S, 300 psi (20 bar) forModel 11438-252S, and 400 psi(28 bar) for the others. The regulated pressure range is 5 to 125 psi (0.3 to 8.5 bar).
Design operating temperaturerange maximums are 35°F to175°F (2° to 80°C) for the stain-less steel versions and 35°F to200°F (2° to 93°C) for the others.
Gauges are supplied separately.
ModelNo.
26383 11438-**
ModelNo.
DIMENSIONS
** See charts below for specific model no.
DESIGN FEATURES DESIGN FEATURESDESIGN FEATURES
DIMENSIONS
PERFORMANCE DATA
AutoJetSPRAY NOZZLE
Hanger Rod
3-WAYSOLENIODAIR VALVE
AIR PRESSUREREGULATORWITH GAUGE
AIRFILTER
AIRLINE
LIQUIDLINE
TW LINESTRAINER
LIQUID PRESSUREREGULATORWITH GAUGE
Center back connectionBottom connection
A B C D EDia.
41⁄4)
45⁄16)
77⁄8)
23⁄8)63⁄16)
11⁄2)
119⁄32)
15⁄8)
3⁄8)15⁄8)
53⁄4)
515⁄16)
91⁄2)
23⁄4)713⁄16)
23⁄4)
35⁄16)
5)
11⁄2)31⁄2)
25⁄16)
27⁄16)
47⁄8)
11⁄2)21⁄4)
26385-60 60 15 - 45
26385-100 100 25 - 75
26385-160 160 40 - 120
26385-200 200 50 - 150
26385-300 300 75 - 225
26385-400 400 100 - 300
26385-600 600 150 - 450
26385-1000 1000 250 - 750
26385-1500 1500 375 - 1125
26385-2000 2000 600 - 150026385-3000 3000 750 - 2250
Max.psi
OptimumOperating
Range (psi)
Line FiltersFOR AIR
G10
FLU
IDLIN
E A
CC
ES
SO
RIE
S
DESIGN FEATURES
DIMENSIONS
These Air Line Filters removeliquid and solid contaminantsfrom air lines to protect equipmentfrom corrosion and excessivewear. Models 11438-16, -17, -1,-2, and -3 have screw-on trans-parent polycarbonate plasticbowls with bowl guards forbreakage resistance. They shouldnot be used in systems wherethe air compressors arelubricated with fire-resistant
synthetics. Models 11438-19, -4,and -5 have screw-on metal bowlswith sight glasses making theliquid clearly visible. All bowlshave a 50 micron filter elementand are designed to operate at a maximum pressure of 150 psi(10 bar) and a maximumtemperature of 125°F (50°C).
The Manual Drain Air Filtermodel features a simple petcock
at the bottom of the bowl formanual drainage when needed,and requires that the filter beeasily accessible.
The Automatic Drain Air Filtermodel features a float-operatedmechanism at the bottom of thebowl that automatically expelsliquid when it is over a criticallevel. It is specially designed foruse in inaccessible locations.
ModelNo.
11438-16 Q\‰"11438-17 Q\„"11438-19 1"
AUTOMATIC DRAIN FILTER DIMENSIONS
NPTConn.
ModelNo.
11438-1 Q\‰"11438-2 E\ˆ"11438-3 Q\„"11438-4 E\‰"11438-5 1"
MAUNUAL DRAIN FILTER DIMENSIONSNPT
Conn.
11438-**** See charts below for
specific model no.
Approx. flow at100 psig with
5 psi press. dropthrough filter
50 scfm150 scfm445 scfm
A B C D EDia.
7"7"
11Q\ˆ"
QQ\ŒÁ"QQ\ŒÁ"1Q\ŒÁ"
6T\ŒÁ"6T\ŒÁ"10Q\ŒÁ"
3T\ˆ"3WO\´„"4E\‰"
3"3"
4O\ŒÁ"
Approx. flow at100 psig with
5 psi press. dropthrough filter
50 scfm50 scfm
150 scfm345 scfm445 scfm
A B C D EDia.
6T\ˆ"6T\ˆ"7E\ˆ"11Q\„"11Q\„"
QQ\ŒÁ"QQ\ŒÁ"QQ\ŒÁ"1Q\ŒÁ"1Q\ŒÁ"
5QT\ŒÁ"5QT\ŒÁ"6QQ\ŒÁ"10U\ŒÁ"10U\ŒÁ"
2E\‰"2E\‰"
3WO\´„"4E\‰"4E\‰"
2T\ŒÁ"2T\ŒÁ"
3"4O\ŒÁ"4O\ŒÁ"
Liquid StrainersLOW-MEDIUM PRESSUREUP TO 6"
G11
FLU
IDLIN
E A
CC
ES
SO
RIE
S
Model TW, TWC, and TWF liquidstrainers are designed for effec-tive strainer performance withminimal maintenance. They pro-tect against the wear and malfunc-tion of pumps, valves, and nozzlescaused by liquid-carried foreignmatter. They are quality built in avariety of materials and sizes tomeet most requirements. Theyfeature a large open screen areafor efficient liquid straining atpressures up to 125 psi (9 bar).Removable bottom pipe plugsprovide an easy method for flush cleaning.
Model TW liquid strainers areavailable with pipe connectionsfrom !\›" to 2!\¤". They feature aremovable bottom cap forcomplete withdrawal of the entirescreen assembly. The bottompipe plug can be replaced with adrain cock for quick flush cleaning.
Made in cast iron (TW) or brass(TWB), both with stainless steelscreens…and in all stainlesssteel (TWSS). Strainer bodycastings are Type 316 stainlesssteel while internal screen is aType 304 stainless steel.
Model TWC liquid strainers areavailable with pipe connectionsfrom 2!\¤" to 4". They aredesigned for handling large flowrates with minimal pressuredrop. TWC strainers offer achoice of wire mesh or perforatedmetal screens. A 1" plugged topoutlet is provided for pressuregauge installation. The bottompipe plug can be replaced with adrain cock for quick flush cleaning.
Model TWF liquid strainers offerflanged connections for use with3" to 6" pipe. They are ideal forhandling extra large flow rateswith minimal pressure drop.Flange mounting hole sizes andlocations meet American
Standard 125 specifications. A1" plugged top outlet is providedfor gauge installations on somesizes. Made in cast iron headwith galvanized steel body tube.
Model 16106 liquid strainers aresimilar in design to standard TWstrainers. Strainer bodies aremade of brass or stainless steelwith large stainless steel screens.A bottom pipe plug provides aneasy method for flush cleaning.16106 series strainers can oper-ate at pressures up to 200 psi(14 bar).
9830 series liquid strainers aresimilar in design to standard TWstrainers. Strainer bodies aremade of ductile iron for superiorcorrosion resistance. Largestainless steel screens efficientlystrain liquids at pressures up to300 psi (21 bar). A ribbed capwith gasket seal is easily removedby hand for screen access.
DESIGN FEATURES
TW TWC
16106 9830
TWFremovable bottom cap
1⁄4"-21⁄2" NPT or BSPT (F)bottom plug for flush cleaning
21⁄2"-4" NPT or BSPT (F)
bottom plug for flush cleaning11⁄2"-21⁄2" NPT or BSPT (F)
removable bottom cap/300 psi (21 bar)3⁄4"-1" NPT or BSPT (F)
bottom plug for flush cleaning3" - 6" flange connection
Page G9
Efficient Continuous Flow Assembly
For systems requiring contin-uous operation, install strainersin parallel. Use one side of linewhile other is being cleaned.
Page G5
Page G11
Page G2
Flush Line(optional)
Liquid StrainersLOW-MEDIUM PRESSURE (CONT.)UP TO 6"
G12
FLU
IDLIN
E A
CC
ES
SO
RIE
S
LiquidStrainerOrderNo.
PipeConn.NPT or BSPT
(F)
MeshSize
Size ofOpening
MeshSize
Size ofOpening
Material
*Mesh•Single
• • DoubleReinforced
SCREENOPEN AREA
TimesInletPipeArea
DIMENSIONS
*30 mesh and 40 x 200 Dutch Weave mesh also available for Type TW.**Flange connection
SCREEN MESH OPENINGS
DIMENSIONS & WEIGHTS
ORDERING INFORMATION
16106-2 TW-SS 100Strainer
TypeMaterial
CodeMeshSize
Inlet/Outlet
Connec-tionSize
StrainerPrefix
Number(9830,16106only)
3 TWC - 16PStrainer
TypeMeshSize
Inlet/Outlet
Connec-tionSize
TW, 9830, 16106
TWC
TWF
•16 1.3 12.41⁄4 TW Q\‰"
•50 SS 2.5 .8 7.4 2!\„" 2E\‰" 1Q\ˆ•80 .8 7.7•100 .8 7.4•16 2.9 15.4
3⁄8 TW E\ˆ"• • 50 SS 5.8 1.8 9.2 3Q\‰" 3Q\„" 2Q\‰• • 80 1.8 9.6
• •100 1.8 9.2•16 2.9 9.7
1⁄2 TW Q\„"• • 50 SS 5.8 1.8 5.8 3Q\‰" 3Q\„" 2• • 80 1.8 6.0
• •100 1.8 5.8•16 8.1 15.2
3⁄4 TW E\‰"• •50 SS 16 4.8 9.1 5Q\‰" 5T\ˆ" 5Q\ˆ• •80 5.0 9.4
• •100 4.8 9.1•16 8.1 9.4
1 TW 1"• •50 SS 16 4.8 5.6 5Q\‰" 5T\ˆ" 4E\‰• •80 5.0 5.8
• •100 4.8 5.6•16 15.5 10.4
11⁄4 TW 1Q\‰"• •50 SS 31 9.3 6.2 7Q\‰" 6E\‰" 13Q\„• •80 9.6 6.4
• •100 9.3 6.2•16 15.5 7.6
11⁄2 TW 1Q\„"• •50 SS 31 9.3 4.6 7Q\‰" 6E\‰" 13Q\ˆ• •80 9.6 4.7
• •100 9.3 4.6•16 28 8.3
2 TW 2"• •50 SS 55 16.7 5.0 9Q\‰" 8Q\„" 25• •80 17.3 5.2
• •100 16.7 5.0•16 28 5.8
21⁄2 TW 2Q\„"• •50 SS 55 16.7 3.5 9Q\‰" 8Q\„" 20Q\„• •80 17.3 3.6
• •100 16.7 3.5
• •50x40 SS 74 15.521⁄2 TWC 2Q\„" • •80x70 SS 183 62 12.9 10" 20Q\„" 69
Perf. Screen Brass 69 14.5• •50x40 SS 74 10.0
3 TWC 3" • •80x70 SS 183 62 8.3 10" 20Q\„" 64Perf. Screen Brass 69 9.4
• •50x40 Monel 129 10.14 TWC 4" • •80x70 Monel 318 108 8.5 12" 26Q\„" 107
Perf. Screen Brass 119 9.4for 3" • •50x40 SS 74 10.0
3 TWF pipe • •80x70 SS 183 62 8.3 11" 20Q\„" 75** Perf. Screen Brass 69 9.4
for 4" • •50x40 Monel 129 10.14 TWF pipe • •80x70 Monel 318 108 8.5 13" 26Q\„" 130
** Perf. Screen Brass 119 9.4for 6" • •50x40 Monel 278 9.6
6 TWF pipe • •80x70 Monel 685 231 8.0 17" 32" 275** Perf. Screen Brass 255 8.8
•16 10.5 19.89830-3⁄4TW E\‰" • •50 SS 21 6.3 11.8 5Q\‰" 7" 8E\‰
• •100 6.3 11.8• •16 10.5 12.2
9830-1TW 1" • •50 SS 21 6.3 7.3 5Q\‰" 7" 8Q\„• •100 6.3 7.3
16106-11⁄2TW-B 16 15.5 7.6
1Q\„"50 SS 31 9.3 4.6 7Q\‰" 6E\‰" 13Q\ˆ
16106-11⁄2TW-SS 80 9.6 4.7100 9.3 4.6
16106-2TW-B 16 28 8.3
2"50 SS 55 16.7 5.0 9Q\‰" 8Q\„" 25
16106-2TW-SS 80 17.3 5.2100 16.7 5.0
16106-21⁄2TW-B 16 28 5.8
2Q\„"50 SS 55 16.7 3.5 9Q\‰" 8Q\„" 20Q\„
16106-21⁄2TW-SS 80 17.3 3.6100 16.7 3.5
FullArea
SquareInches
A B
NetWeight(lbs)Square
Inches
16 .045" 100 .006"
30 .021"40 x 200 .003"Dutch Weave
50 .011" 16P Perforated .045" Diam.80 .007" Sheet
Liquid StrainersLOW-MEDIUM PRESSURETYPE 122
G13
FLU
IDLIN
E A
CC
ES
SO
RIE
S
122-PC122-PPpolypropylene bowl &head 150 psi/10 bar
1⁄2)-3⁄4) NPT or BSPT (F)
polycarbonate bowl &polypropylene head
150 psi/10 bar1⁄2)-3⁄4) NPT or BSPT (F)
Model 122 liquid strainers areideal for lower volume applica-tions at medium pressures.
The Model 122-PP features apolypropylene bowl and head forcorrosion and chemical resistance.
Both model strainers feature handremovable guide bowls. Variousscreen mesh sizes are available.
The Model 122 strainers have a maximum pressure rating of150 psi (10 bar). They are avail-able with 1⁄2) or 3⁄4) NPT or BSPT(F) pipe connections.
Model 122-PC features apolypropylene head with a “clear”and UV-resistant polycarbonatebowl for easy visual inspection ofthe internal screen.
Above: Exploded view of Model 122-PP Liquid Strainer
1. Strainer head, made ofpolypropylene.
2. Screen, stainless steel withpolypropylene frame. Variousmesh sizes available.
3. EPDM rubber O-ring.
4. Bowl, made of polypropylene.
AA122-1/2- PP-50Strainer
TypeMaterial
CodeMesh
ScreenSize
InletOutlet
Connec-tionSize
SCREEN MESH OPENINGS
Mesh Size Size of Opening
StrainerNo.
PipeConn.Female
NPT or
BSPT
StrainerHead
Material
SingleRein-forcedMesh
ScreenNo.
TimesInletPipeArea
SCREENS
OPEN AREA
DIMENSIONS
ORDERING INFORMATION
DESIGN FEATURES
DIMENSIONS & WEIGHTS
— 1
— 2
— 3
— 4
16305080100200
.045)
.021)
.011)
.007)
.006)
.003)
A B
NetWeight
lbs.
Approx.Flow Rate
with5 psi
PressureDrop
in gpm
FullArea
sq. in.Sq.inch
16 23174-1-304SS 3.89 13122-1⁄2-PP Polypropylene 30 23174-2-304SS 3.13 10.5
1⁄2 50 23174-3-304SS 2.31 7.7 1280 23174-4-304SS 2.40 8.0122-1⁄2-PC Polypropylene 100 23174-5-304SS 2.38 8.0
200 23174-7-304SS7.7
2.54 8.531⁄8) 35⁄8) 0.2
16 23174-1-304SS 3.89 7.3122-3⁄4-PP Polypropylene 30 23174-2-304SS 3.13 5.9
50 23174-3-304SS 2.31 4.3 163⁄4 80 23174-4-304SS 2.40 4.5122-3⁄4-PC Polypropylene 100 23174-5-304SS 2.38 4.5
200 23174-7-304SS 2.54 4.8
Liquid StrainersLOW-MEDIUM PRESSURETYPE 124
G14
FLU
IDLIN
E A
CC
ES
SO
RIE
S
124-I 124-AL 124ML-AL
124-NYB 124A-PP 124A-PP-PC 124A-SC-NYB
nylon bowl/aluminum headwith mounting holes
150 psi/10 bar3⁄4)-21⁄2) NPT or BSPT (F)
nylon bowl/aluminum head150 psi/10 bar
3⁄4)-21⁄2) NPT or BSPT (F)
nylon bowl/cast iron head150 psi/10 bar
3⁄4)-21⁄2) NPT or BSPT (F)
nylon bowl & head75 psi/5 bar (11⁄4),11⁄2))110 psi/8 bar (3⁄4),1))
3⁄4)-11⁄2) NPT or BSPT (F)
polypropylene bowl & head75 psi/5 bar
3⁄4)-1) NPT or BSPT (F)
polycarbonate bowl &polypropylene head
75 psi/5 bar3⁄4)-1) NPT or BSPT (F)
nylon bowl & head self-cleaning design
110 psi/8 bar3⁄4)-1) NPT or BSPT (F)
DESIGN FEATURESModel 124 liquid strainersfeature extra large stainless steelscreens for maximum flow rates.The larger screens also allow forless frequent cleaning andmaintenance.
Various material combinationsare available – including nylon,polypropylene, polycarbonate,cast iron, and aluminum. Each isresistant to certain chemicals.The aluminum version strainersare ideal for applications requir-ing a more lightweight unit.
Model 124A-PP-PC strainers withpolycarbonate bowls provide easyvisual inspection of the internalscreen and are UV-resistant.
The strainers will accommodatepipe sizes ranging from 3⁄4) to 21⁄2),and will operate at pressures from75 psi (5 bar) to 150 psi (10 bar).
Model 124ML-AL providesmounting holes that allow formounting to machinery or anangle iron.
Model 124A-SC-NYB offers aself-cleaning design. The strainerallows the filtered liquid to passthrough, while any liquid particlesare returned back to the liquidsupply through a return outlet.
The self-cleaning strainer isuseful in many applicationsincluding those where produc-tion processes leave little timefor strainer inspection.
Liquid StrainersLOW-MEDIUM PRESSURETYPE 124 (CONT.)
G15
FLU
IDLIN
E A
CC
ES
SO
RIE
S
StrainerNo.
PipeConn.Female
NPTor
BSPT
StrainerHead
Material
Mesh•Single
••DoubleRein-forced
ScreenNo.
TimesInletPipeArea
SCREENS
OPEN AREA
DIMENSIONS
*Screen No. **Mesh
12285-1 1612285-4 3012285-2 5012285-3 8012285-6 10012285-5 200
PERFORMANCE DATA
ORDERING INFORMATION
Above: Exploded view ofModel 124A-PC Liquid Strainer
1. Strainer head, variousmaterials available.
2. Screen, stainless steel withpolypropylene frame. Variousmesh sizes available.
3. EPDM rubber O-ring.
4. Clear polycarbonate bowl.
AA124A-1 SC-NYB-80Strainer
TypeMat.Code
MeshScreen
Size
InletOutletConn.Size
Add“SC”
If Self-Clean-
ing
Efficient Continuous Flow Assembly
For systems requiring contin-uous operation, install strainersin parallel. Use one side of linewhile other is being cleaned.
1 —
2 —
3 —
4 — SCREEN MESH OPENINGS
Mesh Size Size of Opening
Page G5
Page G2
Page G9
Page G15
124A-3⁄4-I Cast Iron 21⁄8
124A-3⁄4-AL Aluminum43⁄16) 6) 1
124ML-3⁄4-AL •16 16903-18.6 16.1
124A-3⁄4-NYB Nylon •30 16903-36.9 13.0 33⁄4) 63⁄4) 0.6 23
124A-3⁄4-PP 3⁄4" Polypropylene •50 16903-45.1 9.6
124A-3⁄4-PP-PC Polypropylene •80 16903-55.3 10.0 33⁄4)
63⁄4) 0.4
124A-3⁄4-NYB-PC Nylon
124A-3⁄4SC-NYB Nylon ** *17
8) 0.7
124A-1-I Cast Iron 21⁄8
124A-1-AL Aluminum43⁄16) 6) 1
124ML-1-AL •16 16903-18.6 9.9
124A-1-NYB Nylon •30 16903-36.9 8.0 33⁄4) 63⁄4) 0.6 34
124A-1-PP 1" Polypropylene •50 16903-45.1 5.9
124A-1-PP-PC Polypropylene •80 16903-55.3 6.2 33⁄4)
63⁄4) 0.4
124A-1-NYB-PC Nylon
124A-1SC-NYB Nylon ** * 8) 0.7
124-11⁄4-I Cast Iron •16 15941-1 20.8 13.9 43⁄4
124-11⁄4-AL 11⁄4" Aluminum •30 15941-2 16.7 11.2 53⁄8) 8) 21⁄2 60124ML-11⁄4-AL •50 15941-3 12.4 8.3
124-11⁄4-NYB Nylon •80 15941-4 12.9 8.6 51⁄8) 91⁄4) 11⁄4
124-11⁄2-I Cast Iron •16 15941-141
20.8 10.2 41⁄2
124-11⁄2-AL 11⁄2" Aluminum •30 15941-2 16.7 8.2 53⁄8) 8) 21⁄2 70124ML-11⁄2-AL •50 15941-3 12.4 6.1
124-11⁄2-NYB Nylon •80 15941-4 12.9 6.3 51⁄8) 91⁄4) 11⁄4
124-2-I Cast Iron •16 14634-1 46 13.7 143⁄4• •30 14634-2 37 11.0
124-2-AL 2" Aluminum • •50 14634-3 28 8.2 77⁄16) 101⁄2) 7 160124ML-2-AL • •80 14634-4 91 29 8.5124-21⁄2-I Cast Iron •16 14634-1 46 9.6 141⁄4
• •30 14634-2 37 7.7124-21⁄2-AL 21⁄2" Aluminum • •50 14634-3 28 5.7 77⁄16) 101⁄2)
7170
124ML-21⁄2-AL • •80 14634-4 29 6.0
A B
NetWeight
lbs.
Approx.Flow Rate
with5 psi
PressureDrop
in gpm
FullArea
sq. in.Sq.inch
16305080100200
.045)
.021)
.011)
.007)
.006)
.003)
cam type/316SS1" -3" NPT or BSPT (F)
Spraying Systems’ eductor nozzle increases circulationrates of small pumps by a 4:1
ratio. Capable of circulating largevolumes of liquid, the eductornozzle prevents settling, asagitation assures uniform mix-ture of chemical solutions. It’sconstructed of fiberglassreinforced polypropylene forexcellent chemical and heatresistance (194°F, 90°C). #\°" and#\›" NPT or BSPT connectionsare available.
G16
FLU
IDLIN
E A
CC
ES
SO
RIE
S
Model 19610 quick couplersprovide a fast and easy methodfor connecting and disconnect-
ing nozzles, headers or hoses.Two cam lock handlers with pullrings lock the coupler securely inplace without the use of tools.19610 couplers are constructedentirely of 316 stainless steelwith a VITON gasket. Theyoperate at pressures up to 250psi (17 bar) and are available ina variety of connection sizes.19610 couplers and adaptersare interchangeable with othermajor manufacturers. Write forData Sheet 19610.
HIGH PRESSURE STRAINERS15925
SWIVEL CONNECTORS50828310A 4386
2820
QUICK COUPLERS
TANK MIXING EDUCTOR
50 mesh screen (bottom plug for flush cleaning)3 ⁄4"-1" NPT or BSPT (F)
bottom plug for flush cleaning/choice of screens
1⁄4"- 1⁄2" NPT or BSPT (F)
in-line design/choice of screens1⁄4"- 1⁄2" NPT or BSPT (F)
19610
Y9270-PP
single 280° swivel1⁄8"- 1⁄4" NPT or BSPT (F)Write for Data Sheet 5082.
double 280° swivel1⁄8"- 1⁄4" NPT or BSPT (M)Write for Data Sheet 4386.
Swivel connectors allow exactpositioning of spray nozzles at anyangle within the swivel arc range.A slight turn of the locknut holdsthe swivel in place with no slipping.Swivel connectors feature singleor double swivel bodies and arc
ranges of 280° or 360°. They areavailable with NPT or BSPT inletand outlet connections of !\°" and!\›". These swivel connectorsoperate at pressures up to 125 psi (9 bar) except type10314 which operates up to 600 psi (42 bar).Model 15925 liquid strainers fea-
ture a black oxide-coated mildsteel body with a 50 mesh stain-less steel screen. 15925 strainersoperate at pressures up to 2000psi (138 bar). A removablebottom pipe plug provides aneasy method for flush cleaning.Write for Data Sheet 15996.
Model 8310A liquid strainersoffer stainless steel constructionthroughout with a choice ofscreen mesh sizes. 8310A strain-ers operate at pressures up to5000 psi (350 bar). A removablebottom pipe plug provides aneasy method for flush cleaning.Write for Data Sheet 8310A.
Model 2820 in-line strainersfeature a stainless steel bodywith a stainless steel or Monelscreen in a choice of mesh sizes.2820 strainers operate at pres-sures up to 5000 psi (350 bar).
Inlet and Outlet Conn. Stainer No.* NPT or BSPT (F)
15925-3⁄4 E\‰"
15925-1 1"
Inlet and Outlet Conn. Stainer No.* NPT or BSPT (F)
8310A-1⁄4-* Q\‰"8310A-3⁄8-* E\ˆ"8310A-1⁄2-* Q\„"
Stainer Inlet Conn. Outlet Conn.
No.* NPT or NPT orBSPT (F) BSPT (F)
2820-1⁄4-* Q\‰" Q\‰"2820-3⁄8-* E\ˆ" Q\‰"2820-1⁄2-* Q\„" Q\‰"
15925
8310A
2820
*With 50 Mesh Screen
*Specify Mesh size (16, 30, 50 or 100)
*Specify Mesh size (16, 30, 50 or 100)
Type
SingleSwivel
DoubleSwivel
SwivelConnectorOrder No.
InletPipe
Conn.(F)
NPT orBSPT
OutletPipe
Conn.(F)
NPT orBSPT
Material
DIMENSIONSSwivel
ArcRange
*Indicates Male Thread Conn.
DESIGN FEATURES
DESIGN FEATURES
ORDERING INFORMATION
ORDERING INFORMATION
ORDERING INFORMATION
5082-1⁄8 x 1⁄8 1⁄8)1⁄8)
5082-1⁄8 x 1⁄4 1⁄4)5082-1⁄4 x 1⁄8 1⁄4)
1⁄8) Brass 1E\‰" 2" 5 oz. 280°
5082-1⁄4 x 1⁄4 1⁄4)7618-1⁄8 x 1⁄8 1⁄8) 1⁄8) Brass 1E\‰" 1"
2Q\„ oz.7618-1⁄8 x 1⁄8-AL Alum. 1Q\„ oz.7620-1⁄8 x 1⁄4 1⁄8) 1⁄4) Brass 2Q\„ oz.7620-1⁄8 x 1⁄4-AL Alum. 2" 1Q\‰"
1Q\„ oz. 360°7620-1⁄4 x 1⁄4 1⁄4) 1⁄4) Brass 2Q\„ oz.7620-1⁄4 x 1⁄4-AL Alum. 1Q\„ oz.10314-1⁄8 x 1⁄4 1⁄8) 1⁄4) Brass 1U\ŒÁ" 1T\ˆ" 4 oz.11717-1⁄4 x 1⁄4 *1⁄4) *1⁄4) Brass 1E\‰" 2E\ˆ" 6 oz. 280°4203D-1⁄8 x 1⁄8 1⁄8)
1⁄8)4203C-1⁄8 x 1⁄4 1⁄4)4203A-1⁄4 x 1⁄8 1⁄4)
1⁄8)Brass 2Q\„" 2" 6 oz.
4203B-1⁄4 x 1⁄4 1⁄4)4386-1⁄8 x 1⁄4 1⁄8) *1⁄4) Brass 8 oz.
280°
4386-1⁄8 x 1⁄4-AL Alum. 6 oz.4386-1⁄4 x 1⁄4 1⁄4) *1⁄4) Brass
2Q\„" 2Q\‰"8 oz.
4386-1⁄4 x 1⁄4-AL Alum. 6 oz.7205-1⁄8 x 1⁄8 1⁄8) 1⁄8) Brass 3Q\„ oz.7205-1⁄8 x 1⁄8-AL Alum.
2Q\‰" 1"2 oz.
7450B-1⁄8 x 1⁄4 1⁄8) 1⁄4) Brass 3Q\„ oz.7450B-1⁄8 x 1⁄4-AL Alum. 2 oz.7450C-1⁄4 x 1⁄8 1⁄4) 1⁄8) Brass 3Q\„ oz.
360°
7450C-1⁄4 x 1⁄8-AL Alum.2E\‰" 1Q\‰"
2 oz.7450A-1⁄4 x 1⁄4 1⁄4) 1⁄4) Brass 3Q\„ oz.7450A-1⁄4 x 1⁄4-AL Alum. 2 oz.
OverallWidth
OverallHeight
NetWeight
Pipe Conn. Hex. Size Overall MaximumCoupler Assembly NPT or For Adapter Length PressureNo. BSPT (F) & Coupler (Approx.) psi (bar)
19610-1-316SS 1) 15⁄8) (42 mm) 31⁄4) (83 mm) 250 (17)19610-11⁄4-316SS 11⁄4) 2) (51 mm) 321⁄32) (93 mm) 250 (17)19610-11⁄2-316SS 11⁄2) 29⁄32) (58 mm) 37⁄16) (87 mm) 250 (17)19610-2-316SS 2) 23⁄4) (70 mm) 43⁄8) (112 mm) 250 (17)19610-21⁄2-316SS 21⁄2) 35⁄16) (85 mm) 43⁄4) (121 mm) 225 (15)19610-3-316SS 3) 4) (102 mm) 431⁄32) (127 mm) 200 (14)
Appendix
Trademark Property of:
Celcon® Hoechst Celanese Corporation
Delrin® E.I. DuPont de Nemours and Company
Duranickel® Inco Alloys International, Inc.
Everdur® BancBoston Financial Company
Fairprene® E.I. DuPont de Nemours and Company
Hastelloy® Haynes International, Inc.
Haveg® Ametek, Inc.
Illium® Stainless Foundry & Engineering, Inc.
Incoloy® The International Nickel Company, Inc.
Inconel® Inco Nickel Sales, Inc.
Kynar® Atochem North America, Inc.
Lucite® E.I. DuPont de Nemours and Company
Monel® The International Nickel Company, Inc.
Refrax® The Carborundum Company
Ryton® Phillips Petroleum Company
Stellite® Stoody Deloro Stellite, Inc.
Teflon® E.I. DuPont de Nemours and Company
Ultimet® Haynes International, Inc.
Viton® E.I. DuPont de Nemours and Company
Zircalloy® E.I. DuPont de Nemours and Company
TRADEMARK REGISTRATIONSAND OWNERSHIP
North AmericanSales Engineering Offices
Munro Associates, Inc.P.O. Box 577Hammond, Louisiana 70404504/542-9370Fax: 504/542-0282
Almaka Corporation200 Dickinson Drive, Suite 210Chadds Ford, Pennsylvania 19317610/459-5913 Fax: 610/459-8273
Al Buhl & Associates2000 Innerbelt Business Ctr. Dr.St. Louis, Missouri 63114314/423-1606 Fax: 314/423-6626
J. M. Cash Company, Inc.1736 Oxmoor Road, Suite 103Birmingham, Alabama 35209205/871-7367 Fax: 205/871-7389
J. C. Cox & Associates2825 N. Mayfair Road, Suite 102Milwaukee, Wisconsin 53222920/778-2311 Fax: 920/778-2332
J. F. England CompanyP.O. Box 7875Waco, Texas 76714254/772-9558 Fax: 254/772-5503
AB Associates, Inc.130 Nickerson Street, Suite 204Seattle, Washington 98109206/286-1868 Fax: 206/286-2135
Harriman & Associates, Inc.P.O. Box 348Auburn, Indiana 46706219/925-1711 Fax: 219/925-1090
Hengst Company, Inc.26941 Cabot Road, Suite 101Laguna Hills, California 92653714/367-9900 Fax: 714/367-9800After 4/18/98 area code will be 949
R. F. Johnson & AssociatesP.O. Box 2922Tampa, Florida 33601813/259-9400 Fax: 813/258-8306
Thomas G. Kilfoil Co., Inc.P.O. Box 399San Bruno, California 94066350/583-7242 Fax: 350/583-0375
R. J. Martin & Associates, Inc.10125 Crosstown Circle, Suite 200Eden Prairie, Minnesota 55344612/944-7202 Fax: 612/944-8292
R. C. Maxwell & Associates, Inc.P.O. Box 587Farmington, Michigan 48335248/473-1331 Fax: 248/473-8657
E. I. Pfaff Company3443 Edwards Rd., Suite DCincinnati, Ohio 45208513/871-9900 Fax: 513/871-9961
J. A. Shoemaker & Associates1607 Colonial ParkwayPalatine, Illinois 60067847/359-4710 Fax: 847/359-7961
Sowden Associates174 Route 101 #C21Bedford, New Hampshire 03110603/471-0505 Fax: 603/471-0999
Kenneth M. Swisher Assoc., Inc.855 Route 10, Suite 106Randolph, New Jersey 07869973/927-4424 Fax: 973/927-4420
John Weir & AssociatesP.O. Box 19444Charlotte, North Carolina 28219704/392-9448 Fax: 704/393-3553
HAWAIIThomas G. Kilfoil Co., Inc.P.O. Box 399San Bruno, California 94066350/583-7242 Fax: 350/583-0375
CANADAJohn Brooks Company Limited1260 Kamato RoadMississauga, Ontario, Canada L4W 1Y1905/624-4200 Fax: 905/624-6379
MEXICOSpraying Systems Mexico, S.A. de C.V.Acceso B #102Fracc. Ind. Benito JuarezAmpliacion JuricaQueretaro, Qro. 76120 Mexico524/218-4571 Fax: 524/218-2480
PUERTO RICOSpraying Systems Caribbean, Inc.P.O. Box 60Santa Isabel, Puerto Rico 00757787/845-3823 Fax: 787/845-3824
Regional sales offices ofSpraying Systems Co.products.
For technical/applicationassistance or ordering,please contact regionalsales office.
InternationalSales Engineering Offices
Exclusive distributors ofSpraying Systems Companyproducts.
CANADAALBERTABRITISH COLUMBIAMANITOBAONTARIOQUEBEC
EUROPE
ANDORRAAUSTRIABELGIUMDENMARKFINLANDFRANCEGERMANYGREECEICELANDITALYLIECHTENSTEINLUXEMBOURG
MONACONETHERLANDSNORWAYPORTUGALSAN MARINOSPAINSWEDENSWITZERLANDUNITED KINGDOM
ASIA-PACIFIC
CHINAHONG KONGINDIAINDONESIAJAPANKOREAMALAYSIAPHILIPPINESSINGAPORETAIWANTHAILAND
AFRICA ANDMIDDLE EAST
ALGERIABENINISRAELIVORY COASTJORDANLEBANONMADAGASCARMOROCCOSENEGALSOUTH AFRICASYRIATOGOTUNISIA
AUSTRALIAAND OCEANIA
AUSTRALIANEW CALEDONIANEW GUINEANEW ZEALANDTAHITI
CENTRAL ANDSOUTH AMERICA
ARGENTINABOLIVIABRAZILCHILECOLOMBIACOSTA RICADOMINICAN REPUBLICECUADOREL SALVADORFRENCH GUIANAGUADALUPEGUATEMALAHAITIHONDURASJAMAICAMARTINIQUEMEXICONICARAGUAPANAMAPUERTO RICOURUGUAYVENEZUELAVIRGIN ISLANDS
Spraying Systems Co. Overview ...........2-5Spray Characteristics.............................6, 7Engineering Discussions .....................8-12Nozzle Maintenance ...........................13, 14
QuickJet® Components.....................A2, A3
Hollow ConeQuick WhirlJet®
QA, QLA .....................................................A4QA-W, QLA-W............................................A5QAP............................................................A6QAP-W .......................................................A7
Full ConeQuick FullJet®
QG, QLG ....................................................A8QH, QLH.....................................................A9QH-W, QLH-W .........................................A10QH-SQ, QLH-SQ......................................A11QG15, QG30, QLG15, QLG30 ................A12QG-W, QLG-W.........................................A13ProMax®
QPH .................................................A14, A15H-KY.........................................................A16
Flat SprayQuick VeeJet®
QSU-KY, QSVV-KY..................................A17QSVV, QSU, QVV, QU, QLU............A18-A21
ProMax®
QPT..................................................A22, A23Quick FlatJet®
QLP ..........................................................A24Quick FloodJet®
QTK, QSTK ..............................................A25Quick WashJet®
QEG..........................................................A26
UniJet® System Components............B2-B5
Quick UniJet® System ........................B6, B7
Hollow ConeTX, T-W ......................................................B8D ........................................................B9, B10
Full ConeTG.............................................................B11TG-SQ ......................................................B12TG-W........................................................B13TH-W ........................................................B14D ..............................................................B15
Flat SprayTP .....................................................B16-B19TK .............................................................B20
High PressureEG ............................................................B21TC ....................................................B22, B23
Fine SprayTN, TNSSTC ............................................B2423825, HV ORIFICES, 11430,
BLOW-OFF NOZZLES.........................B2522624, 23945 ...........................................B26
Hollow ConeWhirlJet®
Small CapacityStandard AngleA, AX, B, BX.....................................C2, C3Wide AngleA-W, AX-W, B-W, BX-W .........................C4Extra Wide AngleE..............................................................C5
Medium-Large CapacityC, CX, D...........................................C6, C7
Large CapacityCRC, CF .................................................C8
9360 PolypropyleneAP, LAP, LBP...................................C9-C11
In-Line SeriesBD.........................................................C12
Miner NozzlesBDM......................................................C13
30° HollowJet®
G, H.......................................................C13
High Pressure SprayDry®
AA, BB, AAA, 104........................C14, C15
Offset TypeBA .........................................................C16
DeflectoJet®
8686......................................................C16
SpiralJet® Threaded TypeBSJ .......................................................C17
SpiralJet® Flanged TypeBFSJ .....................................................C18
Full ConeFullJet®
Standard Spray AngleG, GG, H, HH........................C20, C22, C23
Wall MountedGD, GGD, HD................ .................C21-C23
Angle TypeGA, GGA.........................................C21-C23
Square SprayG-SQ, GG-SQ, H-SQ, HH-SQ ......C24, C25
Oval SprayG-VL, GG-VL ..........................................C26
VanelessGANV, GGANV.......................................C27
DistriboJet®
R, RR, RF.............. .........................C28, C29
FullJet®
Narrow Angle -15°G15, GG15, H15.....................................C30
Narrow Angle -30°G30, GG30, HH30..................................C31
Wide AngleG-W, GG-W, H-W, HH-W...............C32-C34
Square Spray, WideH-WSQ, HH-WSQ .........................C33, C34
Angle TypeGA-W, GGA-W...............................C33, C34
FullJet®
KYNAR Series HH-KY..........................C35SpiralJet®
SpiralJet® ThreadedHHSJ.......................................................C36
SpiralJet® FlangedHFSJ .......................................................C37
SpiralJet® Extra Large Free PassageHHSJX..................................................C38
Flat SprayVeeJet®
Standard TypeH-VV, H-VVL, H-U, U....................C40-C43
VeeJet®
KYNAR Series HVV-KY, HU-KY...........C44FlatJet®
Narrow Angle–High ImpactP...................................................C45, C46
FloodJet®
Wide Angle, For Liquid, Air & SteamK............................................................C47
WashJet®
High Pressure-WashingMEG, MEG-SSTC, QCMEG, MEF23990, 24055...............................C48, C49
High Pressure-CoatingRotoClean® Attachments
106A, 220A .................................C50, C51RotoClean® Attachment
225........................................................C52
Fine SprayFogJet®
Large Capacity/Wide Angle7N, 7G.....................................................C54
Hydraulic AtomizingFine Spray/Hollow Cone
LN, LNN-W, LN-D, N, N-W, M................C55FogJet®
Large Capacity/Narrow AngleFF, F ........................................................C56
Basic Nozzle Installations ..........................D2How to Order, Material Code,Choice of Spray Set-Ups ...........................D3
1/8J & 1/4J (Basic Nozzle Parts & Assemblies) ...........D4Air Atomizing Nozzle Body AssembliesW/Strainer, Miniature, Back Connect,Extensions, Top Inlet, Steam Jacket,Thick Walls, Thin Walls, Screw Mount,Top Inlet, 20470 Lube Gun, Swivel, Cluster Type, Twin Spray...........................D5Pressure Spray Set-UpsRound Spray, Deflected Flat Spray ...........D6Wide Angle Round Spray,360° Circular Spray....................................D7Flat Spray...................................................D8Siphon/Gravity-Fed Spray Set-UpsRound Spray, Flat Spray............................D9Pressure Spray Set-Ups (External Mix)Flat Spray ........................................D10, D11
AIR ATOMIZING NOZZLES
GENERAL PURPOSE NOZZLES
UNIJET® SYSTEM
QUICKJET® SYSTEM
INTRODUCTION
Master IndexA small percentage of the items shown in this catalog may not be produced under an ISO registered system. For further information contact your sales representative.
Master Index
1/8JJ(Basic Nozzle Parts & Assemblies) .........D12
Pressure Spray Set-UpsRound Spray, 360° Circular Spray...........D13Wide Angle Round Spray, Flat Spray.......D14
Siphon/Gravity-Fed Spray Set-UpsRound Spray, Flat Spray..........................D15
1/2J(Basic Nozzle Parts & Assemblies) .........D16
Pressure Spray Set-UpsWide Angle Round, Round & Flat Spray .............................................D17
Spray Set-UpsFlat Spray (External Mix), 360° Circular Spray, Siphon Set-Ups - Round Spray ...............D18
1J(Basic Nozzle Parts & Assemblies) .........D19
Pressure Spray Set-UpsWide Angle Round, Round & Flat Spray .............................................D20
Spray Set-UpsFlat Spray (External Mix), Siphon Set-Up - Round Spray .................D21
JAU Automatic Air ActuatedNozzle AssembliesCompact, Standard, 45°, Single Air Line,Shut-Off, Extension .........................D22, D23
Plate Mounted Standard, Adjustable................................D23
Automatic Adjustable AutoJet®
VAU Nozzle Assembly .............................D24
Automatic Air Actuated Nozzle Assemblies10535-1/4J, 10536-1/2J, 10537-1J............D25
Humidification NozzlesSiphon 1/4JH, Pressure Fed 1/4JT .........D26
Compact Humidifying Units3404, 6110................................................D26
Humidification & Fluid Line AccessoriesFloat Valves, Pipe Hanger, SwitchingRelay, Split-Eyelet Connectors, Humidistat,Float Box Assembly, Spray Pipe Assembly,Siphon Injectors,Pressure Tank, AirPressure Regulators,Solenoid Valves, Liquid Strainers, Air Line Filters, LiquidPressure Regulators, Swivel Union, Pressure Gauges ............................D27, D28
AutoJet® (Automatic Spray Guns)Compact Style
1/8JJAUH, 1/4JAUH...............................E2
Air Operation Medium Pressure22AUH, 22AUH-SS, 22AUH-SS-11024,22AUH-SS-14799, 22AUH-7676 ............E3
Air Operation High Pressure24AUA, 24AUA-20190, 24AUA-8395,24AUA-8980 ...........................................E4
Electric Operation High Pressure26AUH, 26AUH-24200, 28JJAU .............E5
GunJet®
Introduction.................................................E6
Heavy Duty High Pressure30, CW1500A, 60, 80, PW4000A, PW4000AS........................E7, E8
Heavy Duty Low Pressure30L, 30L-PP, 23624-30L, 30-20940, 60-21580, 30L-26323, CU150............E8-E10
Medium Duty Low-Medium Pressure23L, 23H, 43LD, 43LC, 43HD, 43HC.....................................E10, E11
Light Duty Low Pressure31 .....................................................E11, E1223623-31-1/4F, 22650-PP, 36, 6104, 4688, 6466, 6590 .....................................E12
GunJet with Front Shut-Off Extensions, Extensions ................E13, E14
Swivel Connectors11990, 9765, 15950, 21550, 21550-90NP, 36466, 36467 .....................E15
High Pressure Strainers8510, 9770 ...............................................E15
Inlet Adapters7029, 14269, 13212, 7599.......................E16
Outlet Adapters4676, 15572, 14643, 10997.....................E16
Motor Driven Rotary Tank Washers190A, 190E.................................................F2190AH, 290A ..............................................F3
Tank Washing Nozzles6353, 12900-1, 15498, 3150 ......................F4
Rotary Tank Washing Nozzles18250, 21400, 23240-2, 23240-3, 36640 ..........................................F527500, 28500..............................................F6
Foam Control Nozzle22561..........................................................F7
Self-Cleaning Nozzles20235, 20210..............................................F7
Tube Cleaning Nozzles10706..........................................................F7
Hot Melt Glue Tips ....................................F7
DescaleJet®
Self-Aligning/High ImpactAA117AC, AA118AC, AA218AC ................F8
One PieceH3/8UHSS-E, 3/4USSTC-E .......................F8
Dove Tail21127, 21123, 21125 ..................................F9
CasterJet®
19930..........................................................F9
SprayDry®
Fine Atomization SpraySX, ST, SB................................................F10
AirJet® Fogger23412, QJ25655 .......................................F11
Adjustable Ball-Type NozzlesClip-Eyelet® Type,Threaded Type (37235)............................F12
WindJet®
727 Blow-off NozzlesABS, RYTON, Aluminum..........................F13
Self-Cleaning Manifold SystemAutomatic Brush, Manual Brush& Brushless Versions .......................F14, F15
Moisturizing/Coating Header............F16, F17
FlowbackNozzle LancesCluster & Single Orifice ............................F18
Split-EyeletConnectors7521, 8370, 15475, 12521.........................G2
AdjustableBall Fittings36275, Stamped, Cast ...............................G3
ValvesCheckAB, BB, 10742A, 12328.............................G4Plug23220 .........................................................G4Rollover23830 .........................................................G4Shut-Off344M, 343M-PP, 344M-PP, 346M-PP, 20900 ........................................G5Throttling23520-PP ...................................................G6Pressure Relief/Regulating23120-PP, 8460, 9840, 6815, 110 .............G6Solenoid2-way, 3-way ..............................................G7
Pressure Regulators For Air .......................................................G8
Pressure Gauges26385, 26383.............................................G9
Pressure Regulators For Liquid..................................................G9
Line FiltersFor Air .....................................................G10
Liquid StrainersLow-Medium PressureTW, TWC, TWF, 16106, 9830.........G11, G12122-PP, 122-PC .......................................G13124-I, 124-AL, 124ML-AL, 124-NYB,124A-PP, 124A-PP-PC,124A-SC-NYB.................................G14, G15High Pressure15925, 8310A, 2820 ................................G16Quick Couplers19610 .......................................................G16Swivel Connectors5082, 4386 ...............................................G16Tank Mixing Eductor ................................G16
FLUIDLINE ACCESSORIES
SPECIAL PURPOSE NOZZLES
SPRAY GUNS
Terms and Conditions of Sale
(1) MODIFICATION OF TERMS
SellerÕs acceptance of any order is expresslysubject to BuyerÕs assent to each and all ofthe terms and conditions set forth below andBuyerÕs assent to these terms and conditionsshall be conclusively presumed from BuyerÕsreceipt of this document without prompt writtenobjection thereto or from BuyerÕs acceptanceof all or any part of the goods ordered. Noaddition to or modification of said terms andconditions shall be binding upon Seller unlessspecifically agreed to by Seller in writing. IfBuyerÕs purchase order or other correspon-dence contains terms or conditions contraryto or in addition to the terms and conditionsset forth below, acceptance of any order bySeller shall not be construed as assent to suchcontrary or additional terms and conditions orconstitute a waiver by Seller of any of theterms and conditions.
(2) PRICE
Unless otherwise specified: (a) all prices, quo-tations, shipments and deliveries by Seller aref.o.b. SellerÕs plant; (b) all base prices togeth-er with related extras and deductions, are sub-ject to SellerÕs price in effect at the time ofshipment; and (c) all transportation and othercharges are for the account of Buyer, includ-ing all increase or decrease in such chargesprior to shipment. Payment of said price shallbe due at the remittance address shown onthe SellerÕs invoice 30 days after the date ofSellerÕs invoice. Interest will be charged at arate of 11-1/2% per month on all balancesoutstanding more than 30 days after the dateof the invoice.
(3) MINIMUM BILLING
The minimum billing by the Seller for any ordershall be $20.00.
(4) WARRANTIES
Seller warrants that its products will conform toand perform in accordance with the productsÕspecifications.Seller wirrants that the products do not infringeupon any copyright, patent, or trademark.THE FOREGOING WARRANTIES ARE INLIEU OF ALL OTHER WARRANTIES,EXPRESS OR IMPLIED, INCLUDING, BUTNOT LIMITED TO, THOSE CONCERNINGMERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE.
(5) LIMITATION ON LIABILITIES
Because of the difficulty of ascertaining andmeasuring damages hereunder, it is agreedthat, except for claims for bodily injury, SellerÕsliability to the Buyer or any third part, for anylosses or damages, whether direct or other-wise, arising out of the purchase of productfrom Seller by Buyer shall not exceed the totalamount billed and billable to the Buyer for theproduct hereunder. IN NO EVENT WILLSELLER BE LIABLE FOR ANY LOSS OFPROFITS OR OTHER SPECIAL OR CONSE-QUENTIAL DAMAGES, EVEN IF SELLERHAS BEEN ADVISED OF THE POSSIBILITYOF SUCH DAMAGES.
(6) QUALITY ASSURANCE
Seller shall have no obligation to ensure thatany goods purchased from Seller meet anyspecial Buyer quality assurance specificationsand/or other special Buyer requirementsunless such specifications and/or other require-ments are specifically set forth in BuyerÕs pur-chase order and expressly accepted by Seller.In the event that any such goods supplied bySeller in connection therewith, are applied toan end use without the appropriate specifica-tion and/or other requirement therefore havingbeen set forth in BuyerÕs purchase order andexpressly accepted by Seller, Buyer shallindemnify and hold Seller harmless againstany and all damages or claims for damagesmade by any person for any injury, fatal ornonfatal, to any person or for any damage tothe property of any person incident to or arisingout of such application.
(7) CLAIMS
Claims respecting the condition of goods, com-pliance with specifications or any other matteraffecting goods shipped to Buyer must bemade promptly and, unless otherwise agreedto in writing by Seller, in no event later thanone (1) year after receipt of the goods byBuyer. In no event shall any goods bereturned, reworked or scrapped by Buyer with-out the express written authorization of Seller.
(8) DEFAULT IN PAYMENT
If Buyer fails to make payments on any con-tract between Buyer and Seller in accordancewith SellerÕs terms, Seller, in addition to anyother remedies available to it, may at its option,(i) defer further shipments until such paymentsare made and satisfactory credit arrangementsare reestablished or (ii) cancel the unshippedbalance of any order.
(9) TECHNICAL ASSISTANCE
Unless otherwise expressly stated by Seller:(a) any technical advice provided by Seller withrespect to the use of goods furnished to Buyershall be without charge, (b) Seller assumes noobligation or liability for any such advice, or forany results occurring as a result of the appli-cation of such advice; and (c) Buyer shall havesole responsibility for selection and specifica-tion of the goods appropriate for the end use ofsuch goods.
(10) CANCELLATION OFSPECIAL ORDERS
Special Orders or goods specially manufac-tured for Buyer cannot be canceled or modifiedby Buyer, and releases cannot be held up byBuyer, after such goods are in process exceptwith the express written consent of Seller andsubject to conditions then to be agreed uponwhich shall include, without limitation, protec-tion of Seller against all loss.
(11) PATENTS
The Seller shall not be liable for any costs ordamages incurred by the Buyer as a result ofany suit or proceeding brought against Buyerso far as based on claims (a) that use of anyproduct, or any part thereof, furnished here-under, in combination with products not sup-plied by the Seller or (b) that a manufacturingor other process utilizing any product, or anypart thereof furnished hereunder, constituteeither direct or contributory infringement of anypatent of the United States.The Buyer shall hold the Seller harmlessagainst any expense or loss resulting frominfringement or patents or trademarks arisingfrom compliance with BuyerÕs designs or spec-ifications or instructions.
(12) COMPLETE AGREEMENT
The terms and conditions set forth herein,together with any other documents incorporat-ed herein by reference constitute the sole andentire agreement between Buyer and Sellerwith respect to any order superseding com-pletely any oral or written communications. Noadditions to or variations from such terms andconditions whether contained in BuyerÕs pur-chase order, any shipping release or else-where shall be binding upon Seller unlessexpressly agreed to in writing by Seller.
(13) GOVERNING LAW
All orders are accepted by Seller at its mailingaddress in Wheaton, Illinois, and shall be gov-erned by and interpreted in accordance withthe laws of the State of Illinois.
We recognize that at times it is necessary for our customers to returnproducts for a variety of reasonsÉthat returns are a normal part of anon-going business relationship. To make the process as straight-for-ward and fair as possible, our policy is based upon the following:
¥ An error on our part: WeÕll credit you for the product and shippingcosts, up to one year from ship date.
¥ An error on your part: Standard products can be returned for fullcredit, freight prepaid, also up to one year from date of shipment.There is the normal restocking charge of 20%.
Returns are subject to inspection.For quick handling and authorization of returns, contact your localsales office.
CUSTOMER RETURN POLICY
A small percentage of the items shown in this catalog may not be produced under an ISO registered system. For further information contact your sales representative.
Technical SupportSpraying Systems Co. produces literally thousands of sales and technical documents related to nozzle selection, spray performance and industrial applications. Specialized video programs are available featuring the use of spray nozzles inmany industrial applications, as well as educational programson nozzle performance and spray nozzle maintenance. See orcall your Spraying Systems’ representative for complete details.