Date post: | 02-Jan-2016 |
Category: |
Documents |
Upload: | ivan-cabrera |
View: | 443 times |
Download: | 3 times |
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
II
For quotations and product pricing go to www.eleusa.com
Introduction
III
Subject Page Number
At ELE International we have been serving the needs of major material producers, quality control laboratories, highereducation facilities and universities for around 50 years. Today, our unique combination of specialized constructionmaterials testing equipment and technical services is unrivalled around the world and includes equipment for thefollowing applications:
GeotechnicalEngineering
Soil mechanics Foundation design Sampling, analysis and
classification of soil Permeability Consolidation Triaxial – static Direct shear Site investigation and
in-situ tests
ConcreteTechnology
Construction strength and quality
Strength of concrete Fresh concrete Cement analysis Aggregate classification Mix design Non destructive testing Sample preparation
AsphaltTechnology
Design and testing of bituminous mixtures
Analysis of bituminous materials Binder content Pavement flexure Temperature and density
Introduction to ELE III to VISoil Testing 1 to 54Concrete 55 to 84Cement 85 to 94Aggregates 95 to 100Asphalt 101 to 113Gradation 114 to 123General 124 to 146Index & Numerical Index 147 to 156Conditions of Sale 157
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
The Company
IV
For quotations and product pricing go to www.eleusa.com
V
Construction Materials TestingEquipment
At ELE International we specialize in the design, manufacture and supply of technically advanced, high quality construction materials testing equipment.
As a world leading manufacturer, and part of the multi-national Danaher Corporation, we have the resources, skills and knowledge to support your business, providing the expertise you need for accurate, reliable and consistent testing of soils, concrete, cement, aggregates, asphalt and rock.
Our products are used by major material producers, quality control laboratories and in higher education and universities. In each case we offer unrivalled global customer service, with comprehensive technical and applications support.
Customer Service
With around 50 years experience as a major manufacturer, and with products and systems in over 150 countries around the world, we are able to offer a wealth of practical experience and technical knowledge to support your business.
We offer dedicated installation, calibration and training services, plus demonstration facilities and hot-line customer support, with our highly trained service engineering team ensuring that your ELE equipment is maintained in optimum condition.
In addition, our strategically located offices in North America, Europe, Asia and our global network of accredited distributors provide a prompt and effective response to all your enquiries.
Just as importantly, our large stock holdings and fast manufacturing processes, plus full after sales service, enable us to deliver products quickly to keep your operation running efficiently.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
Using the Catalog
VI
For quotations and product pricing go to www.eleusa.com
1
Soil Testing
2 Data Acquisition8 Triaxial17 Permeability22 Shear24 Consolidation28 Unconfined Compression29 Compaction32 CBR35 Density40 Moisture41 Grain Size Analysis44 Liquid Limit46 Plastic and Shrinkage Limit47 Classification50 Sampling54 Water Level
How to find the products you need
Finding and ordering the products you need is quick and easy.
The Catalog is divided into color coded sections, each of which covers key areas of construction materials testing. Each section is then sub-divided into product groups, with full product descriptions, specification, and ordering and spares information.
Finding a product
Select the relevant area of application from the main index.
Simply browse through the section to find the product you need. Alternatively, you can use the product name or product number indexes at the back of the Catalog.
How to orderTo order a product simply note the product Catalog number.
Then call our sales hot line or contact your nearest distributor, quoting the Catalog number and quantity required.
Please note that when ordering electrical products you need to quote the complete Catalog number including the final suffix, which denotes the correct electrical specification.
Catalog numbering systemEvery product has a unique Catalog number. The numbering system follows a common format:
E199 Product Group
E199-9999 Item Number
E199-9999/99 Accessory, spare or consumable
Electrical specifications are shown as follows:
E199-9999/01 220-240 V, 50 Hz, 1 ph as described
E199-9999/02 110-120 V, 60 Hz, 1 ph as described
E199-9999/06 220-240 V, 60 Hz, 1 ph as described
E199-9999/09 110-220 V, 50 Hz, 60 Hz or 50-60Hz, 1ph switchable as described
When ordering electrical equipment please specify the correct voltage and Catalog number to avoid any delay in delivery.
Spare partsWe maintain an extensive stock of spare parts to ensure that your ELE construction materials testing equipment is maintained in optimum condition.
Spare parts are not listed in this Catalog. Instead, to order simply contact either our service department or your nearest distributor, stating the product Catalog number, product serial number or other identifying mark, and approximate date of purchase.
For quotations and product pricing go to www.eleusa.com
57
Concrete - ASTM Compression Tester
ACCU-TEK™ 350 Digital SeriesASTM C-39;AASHTO T-22.
Automatic stress calculation and display.RS-232C communication port.Solid steel side member construction.Front and rear safety guards provided as standard.Meets ASTM and AASHTO specifi cations.Adaptable, using a wide range of accessories.Rapid-change platen mounting system.
For testing a wide range of concrete specimens, the ACCU-TEK™ 350 Digital Series compression tester provides the ruggedness of solid steel frame construction with the microprocessor technology of the ELE Advanced Digital Readout System. The compact single unit design consists of a heavy duty 350,000 lbf. (1,555 kN) capacity load frame, hydraulic pump and digital readout system.
The 11.5” (292 mm) wide day light opening of the frame provides accessibility and convenience for placing specimens. Front and rear safety guards are supplied as standard. The rapid-change platen system facilitates mounting accessories to the upper crosshead. A wide range of accessories is available for cylinder, cube, beam, and block specimen testing – from 2” (50 mm) cubes to 10” (254 mm) blocks.
Specifi cations
Capacity. 350,000 lbf. (1,555 kN).
Vertical Clearance.
19.75” (502 mm) without upper platen assembly.
HorizontalClearance.
11.5” (292 mm) between uprights.
Ram. 7.716” (196 mm) diameter; 2” (50 mm) stroke.
Pump. 1 h.p. (0.7 kw) electro-hydraulic pump mounted within reservoir with overload protection.
Controls. Pump-mounted pressure compensated fl ow control valve with 4-position control lever and adjustable fl ow valve. Pump on/off switch.
Lower Platen. 10” w. x 14” d. x 1” h. (254 x 355 x 25.4 mm).
Display System. Digital display with membrane keypad; pace deviation bargraph; automatic stress calculation; data storage for 500 tests; RS232C data output and printer ports.
Range. 3,500 to 350,000 lbf. (15.5 to 1,555 kN.)
Accuracy. Factory calibrated to within 1.0% of reading - from 1% to 100% of machine capacity.
Dimensions. 27” w. x 18” d. x 44” h. (686 x 457 x 1,118 mm).
Weight. Net 850 lbs. (385 kg).
Ordering InformationUpper platen assembly and frame stand not included; order separately.
EI36-0718/02. 110vAC, 60 Hz, 1ø.
EI36-0718/06. 220vAC, 60 Hz, 1ø.
EI36-0718/01. 220vAC, 50 Hz, 1ø.
AccessoriesEI37-5500. Platen Set for 6” x 12” (152 x 305 mm) Concrete Cylinders.
E137-5561. Pedestal for testing 4” x 8” Cylinders, requires 37-5500.
EI37-5504. Platen Set for 3” x 6” (76 x 152 mm) Concrete Cylinders.
EI37-5510. Platen Set for 2” (50 mm) Cube.
EI37-5512. Platen Set for 6” (152 mm) Cube.
EI37-5520. Platen Set for Blocks up to 10” (254mm).
EI37-5524. Flexure Attachment.
EI37-5575. Frame Stand.
EI37-4861/02. Portable Impact Tape Printer, Serial Interface. 110vAC, 50/60 Hz, 1ø.
Replacement Parts:4699-1315. Ram Seal
9806-0016. Accutek Oil
New and Updated Product DetailsAt ELE we have an ongoing programme of product research and development. This is designed to ensure that our equipment incorporates advances in construction materials testing technology and always meets the latest industry guidelines and legislation.The design or build of the products in this Catalog may therefore change from time to time, or be replaced with new models.To learn more about the launch of new products or the latest versions of products shown in this Catalog, please visit our web site at www.ele.com.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
2
Soil Testing - Data Acquisition
For quotations and product pricing go to www.eleusa.com
3
Soil Testing - Data Acquisition
ELE DataSystem
System comprises Software, ADU Datalogger, andTransducers.Options available for Triaxial, Consolidation, Direct/Residual Shear and CBR tests.Automates data logging, analysis, and reporting toASTM/AASHTO and British Standards.Accurate and repeatable test procedures.Multi-tasking; perform several tests concurrently.Easily expandible.Import and Export of sample data in AGS format
ELE DataSystem is a unique system designed to interface with laboratory testing equipment, thereby freeing the technician to perform other activities. It provides the geotechnical engineer with fully automated data collection and analysis capabilities for the laboratory.
The system has been tailored to suit the requirements of a wide range of customers including commercial testing labs, educational and governmental authorities. Contractors and consultants will quickly realize the productivity benefits of ELE DataSystem, while students in educational institutions will have the added benefit of direct involvement in the use of computer technology related to conventional materials testing methods.
Through ELE DataSystem and your computer, you will achieve not only professional testing procedures in accordance with industry standards but also cost effective benefits in productivity and reduced operator fatigue. Eliminate the need for overtime, night shifts and weekend shifts for data logging purposes; automated logging enables greater utilization of working hours, considerable time saving in the recording and calculation of test results, and automatic printing and plotting of test results for direct entry into a report.
ELE DataSystem equipment can be divided into three main groups including: ELE DataSystem Software — specially written software packages designed to record, analyse, and report test data guiding the user through testing procedures in accordance with ASTM/AASHTO or British Standards.
ELE Autonomous Data Acquisition Unit (ADU) — a sophisticated data acquisition unit with on-board intelligence and memory capability.
ELE DataSystem series Transducers — a complete range of transducers linking popular geotechnical soils testing devices to the ADU.
ELE DataSystem can be tailored to work on a wide variety of laboratory testing devices, including equipment not manufactured by us. Our highly trained technical service group is always available to help develop a system which best meets your requirements.
ELE DataSystem Software
Windows® compatible programs available for Triaxial,Consolidation, Direct/Residual Shear and CBR tests. Tests are run with step-by-step instructions selectablebetween ASTM/AASHTO and British standards. Automatic Report Generation in accordance withASTM /AASHTO and British standards Real-time graphical outputs both to screen and printeras required during test Tests can be performed using SI, imperial or metricunits. Test stages have built-in functions to aid on-the-flycalculation of set-up parameters where appropriate. Minimum data entry — machine and transducer dataheld on system disk. Comprehensive ‘Help’ screens Facility to enlarge on-screen transducer readingsduring test monitoring AGS (Association of Geotechnical andGeoenvironmental Specialists) file compatibility forelectronic exchange of data
With the growing demand for automated testing ELE offer DataSystem 7, a suite of geotechnical data acquisition, analysis, and reporting software.
DataSystem 7 is designed to record, analyze and report test data per ASTM, AASHTO, and British Standards for Quick-Undrained Triaxial, CU/CD Triaxial, Consolidation, Direct/Residual Shear and CBR tests. Available for Education purposes is “Permeability in a Triaxial Cell” that conforms to BS 1377.
The software runs on a personal computer connected to the ELE ADU data logger with transducers and has been designed and written for use by engineers and technicians.
Each package is user-friendly and guides the user through the test procedure in accordance with the selected Standard (ASTM/AASHTO or BS). Standard screen layouts present sample details, test stage, menu options and data entry.
The engineer has total control over those areas of analysis where an engineering judgement is required. The test techniques and methods follow generally accepted geotechnical engineering practice.
All test data and reports are automatically filed in a logical folder structure based on Job Number, Test Type & Sample Number. Files for each test are given a unique name, based on sample i.d., date and time. This system allows easy identification of historical test data and ensures that test data will never be accidentally over-written.
DS7 is compatible with XP Pro Operating System and MS Word up to and including Word 2003 version 12, Service Pack SP1.
The packages of software required are accessed by an activation code, supplied by ELE, allowing the customer to build up a suite of software on an ‘as required basis.
Each program is complete in its own right and can be integrated into the system at any time.
Please refer to the following page for a detailed listing of the packages available.
IBM or compatible systems and the ADU are required forsoftware operation.
Test Analysis Screen, Consolidation Square Root Plot.
Test Monitoring Screen showing CU/CD Triaxial test in progress.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
4
Soil Testing - Data Acquisition
For quotations and product pricing go to www.eleusa.com
5
Soil Testing - Data Acquisition
DS7 Quick Undrained Triaxial Software
Tests are run with step-by-step instructions selectablebetween ASTM/AASHTO and British standards. Automatic Report Generation in accordance withASTM/AASHTO and British standards. Real-time graphical outputs both to screen and printeras required during test. Compatible with Windows operating systems fromWindows 95 onwards. Options for single or multi-stage testing on onesample. Mohr circles produced for graphical analysis.
Options are available for a single test on one sample, standard three-sample procedure with linking of the results or for a multi-stage test on one sample. Load and strain are monitored through transducers.
Various printouts and graphical plots are available including basic sample data, moisture content, and density. The program tabulates shearing data and plots stress against strain. Mohr circles are produced for graphical analysis.
Ordering InformationEI27-1750.
DS7 CU/CD Effective Stress TriaxialSoftware
Tests are run with step-by-step instructions selectablebetween ASTM/AASHTO and British standards. Automatic Report Generation in accordance withASTM/AASHTO and British standards. Real-time graphical outputs both to screen and printeras required during test. Compatible with Windows operating systems fromWindows 95 onwards. Complete package for consolidated drained andconsolidated undrained triaxial tests.
Options are available for a single test on one sample, standard three-sample procedure with linking of the results or for a multi-stage test on one sample. Load and strain are monitored through transducers.
Various printouts and graphical plots are available including basic sample data, moisture content, and density. The program tabulates shearing data and plots stress against strain. Mohr circles are produced for graphical analysis.
Ordering InformationEI27-1760.
DS7 Permeability in a Triaxial CellSoftware
Comprehensive ‘Help’ screens included. Clear test information presented on screen display.
This program provides data for the determination of permeability of soil specimens using a triaxial cell and two volume change units. It is ideal for Educational purposes and is in accordance with BS 1377.
Ordering InformationEL27-1765.
DS7 One-Dimensional ConsolidationSoftware
Tests are run with step-by-step instructions selectablebetween ASTM/AASHTO and British standards. Automatic Report Generation in accordance withASTM /AASHTO and British standards. Real-time graphical outputs both to screen and printeras required during test. Tests can be performed using SI, imperial or metricunits.Automatic compensation for frame deformation.
DataSystem Consolidation Software provides all basic functions needed to record and analyze consolidation test data. Options are available for monitoring settlement on a log time or square-root time basis. Printouts and graphical plots are available for all stages including Mv and Cv moisture content, voids ratio plots, and initial sample conditions.
Ordering InformationEI27-1770.
DS7 7 Geotech Software General Module.
Ordering InformationEI27-1700.
DS7 Direct/Residual Shear Software
Tests are run with step-by-step instructions selectablebetween ASTM/AASHTO and British standards. Automatic Report Generation in accordance withASTM/AASHTO and British standards. Real-time graphical outputs both to screen and printeras required during test. Compatible with Windows operating systems fromWindows 95 onwards. Options for both quick undrained and drained sheartests. Single or Multiple stages Automatic compensation for frame deformation.
This unique package provides test options for quick undrained or drained shear tests with the user selectable option of residual testing. Individual test results can be linked together to produce the Coulomb Envelope. Printouts and plots are available for sample description and basic test data such as moisture content, etc. Real-time plots of settlement, shear versus displacement and vertical displacement during shearing is readily available via the computer screen or printer.
Ordering InformationEI27-1790.
DS7 CBR Penetration Software
Two tests can be combined under the summary reportfor top and base of sample test results. Tests are run with step-by-step instructions selectablebetween ASTM/AASHTO and British standards. Automatic Report Generation in accordance withASTM/AASHTO and British standards. Real-time graphical outputs both to screen and printeras required during test. Compatible with Windows operating systems fromWindows 95 onwards.
This program provides the classical data for the CBR test. Load and penetration are monitored simultaneously. The program tabulates the results and provides a graphical presentation report.
Ordering InformationEI27-1795.
Autonomous Data Acquisition Unit (ADU)
Up to 32 input/output channels. Up to 100 readings per second in normal multi-tasking mode. Standard RS-232C interface. Compatible with a complete range of transducers foralmost any test requirements.
The ADU is a sophisticated data acquisition unit which provides the link between your computer and the transducers connected to your test equipment.
With complete on-board intelligence and memory capabilities, the ADU takes control of the data acquisition process. The user is not required to do any programming. All test initiation functions and data transfer procedures are handled by the microcomputer and ADU software. With all real time activities controlled by the ADU, the microcomputer may be switched off or used for other purposes while testing is in progress.
Housed in a free standing case, the ADU is supplied complete with an 8-channel input module. The unit can easily be upgraded to a capacity of 32 channels through the optional 8-Channel Expansion Modules.
Specifications
Case. Free standing; houses power supply, analog to digital conversion module, 128k bytes of memory storage and an 8-channel analog input module with transducer energization.
Sockets. Standard 5-pin DIN type.
Input Range. ± 5 volts to ± 10 mV full scale.
Transducer
Supply.
10vDC.
Dimensions. 17-1/2” w. x 16” d. x 7” h. (445 x 406 x 178 mm).
Weight. Net 25 lbs. (11.3 kg).
Ordering InformationEI27-1495/02. 110-120vAC, 50/60 Hz, 1Ø.
EI27-1495/01. 220-240vAC, 50/60 Hz, 1Ø.
AccessoriesEI27-1502. 8-Channel Expansion Analog Input Module.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
6
Soil Testing - Data Acquisition
For quotations and product pricing go to www.eleusa.com
7
Soil Testing - Data Acquisition
S-Type Load Cells
Wide range of capacities to choose from. Rugged, sealed construction. Easily installs on load frames. Supplied complete with calibration certificate and5-pin DIN type connector for connection to the ADU.
ELE S-Type Load Cells provide an economical means of obtaining accurate load readings during unconfined compression, triaxial and CBR test applications. They are supplied complete with all mounting hardware, 5-pin DIN type connector and calibration certificate.
Specifications
Excitation. 10vDC.
Output. 3.0 mV/V minimum.
Non-Linearity.
0.03% full scale output.
Hysteresis. 0.02% full scale output.
BridgeResistance.
350 ohms nominal.
OverloadCapacity.
150%.
MountingHardware.
Includes all necessary hardware for mounting to the Tritest 50 and Versa-Loader load frames.
Ordering InformationEI27-1581. 500 lb. (2.2 kN) capacity. Net wt. 1 lb. (0.45 kg).
EI27-1583. 2,000 lb. (8.9 kN) capacity. Net wt. 1 lb. (0.45 kg).
EI27-1587. 10,000 lb. (44.4 kN) capacity. Net wt. 3 lbs. (1.3 kg).
Submersible Load Transducers
Submersible Load Transducers are used to accurately measure axial loads applied to the triaxial test specimen. Mounted in place of the standard triaxial cell loading pistons, these unique transducers measure loads directly on top of the specimen. This configuration totally eliminates any effect of piston friction on load readings. Transducers are supplied complete with a 5-pin DIN type connector and calibration certificate.
Ordering InformationEI27-1573. 1,100 lb. (5.0 kN) capacity.
AccessoriesEI27-1293 Distance Piece. Required when using Submersible Load Transducers installed on our triaxial cells.
Displacement Transducers
Ideally suited for use with ADU for accuratedisplacement measurements.Supplied standard with 5-pin DIN type connector. Models available for use in consolidation, shear, CBRand triaxial test applications. Supplied complete with mounting hardware forspecified products.
Displacement Transducers are used in consolidation, shear, CBR, and triaxial test applications for accurate displacement measurements. They are supplied complete with a 5-pin DIN type connector for direct hook-up to the ADU.
Specifications
Construction. Fully encapsulated electronics, sealed in a stainless steel case.
Excitation. 10vDC.
Connector. 5-Pin DIN type.
MountingBracket.
Included as standard.
Weight. Net 1 lb. (0.45 kg).
Ordering InformationEI27-1649. Consolidation Displacement Transducer. 0 to 0.4” (0 to 10 mm) range. For use on EI25-0402 series Consolidation Apparatus.
EI27-1689. Vertical Displacement Transducer. 0 to 0.3999” (0 to 9.999 mm) range. For use on Direct/Residual Shear Machines.
EI27-1697. Horizontal Displacement Transducer. 0 to 0.3999” (0 to 9.999 mm) range. For use on Direct/Residual Shear Machines.
EI27-1617. Axial Strain Transducer. 0 to 2.0” (0 to 50 mm) range. For use on Triaxial Cells.
EI27-1706. CBR Displacement Transducer. 0 to 2.0” (0 to 50 mm) range. For use on Tritest and Versa-Loader Series Load Frames.
Volume Change Transducer
250 psi (1,700 kPa) maximum working pressure. Reversing valves to increase capacity. Steel hinged case for wall mounting and accessto piping. Supplied complete with calibration certificate.
The Volume Change Transducer provides continuous measurements of volume change during the triaxial test. The assembly includes valves to reverse the flow through the unit, providing increased capacity.
Specifications
MaximumPressure.
250 psi (1,700 kPa).
Excitation. 10vDC.
Output. 1.25 Volts full range.
Capacity. 80 cc x 0.1 cc sensitivity.
Case. Steel; hinged for access to piping.
Connector. 5-Pin DIN type.
OverallDimensions.
9” w. x 7” d. x 14-1/2” h. (229 x 178 x 368 mm).
Weight. Net 10 lbs. (4.5 kg).
Ordering InformationEI27-1641.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
8
Soil Testing - Triaxial
For quotations and product pricing go to www.eleusa.com
9
Soil Testing - Triaxial
Tri-Flex 2/DataSystem Triaxial Test SetASTM D-2850, D-4767;AASHTO T-296, T-297.
The Tri-Flex 2/DataSystem Triaxial Test Set provides the geotechnical engineer with a comprehensive line of products satisfying the latest in triaxial testing techniques.
The set features the following:
The 11,200 lb. (50 kN) capacity Digital Tritest 50Load Frame featuring a microprocessor-controlledstepper motor drive system providing fully variablespeeds from 0.399999” (9.99999 mm) per minute toas low as 0.000001” (0.00001 mm) per minute. A Triaxial Cell complete with accessories for drainedand undrained testing of 2.8” or 70 mm diameterspecimens to confining pressures of up to 145 psi(1,000 kPa). The ADU Data Acquisition Unit with 8 channels, forautomated data acquisition and recording of testparameters. Complete set of Electronic Measurement Transducersfor load, displacement, pressure and volume change. DataSystem Triaxial Software for recording, analysisand report generation in English or Metric units. The Tri-Flex 2 Master Control Panel and De-airedWater Tank System for precise applications ofconfining, back and saturation pressures (Note: notshown above, see pages 14 and 15 for completespecifications).
Computer hardware and peripherals required for system operation; not included. Contact factory for system requirements.
Ordering InformationSet Includes:1 ADU 8-Channel Data Acquisition Unit (27-1495/0x).1 Axial Strain Transducer (27-1617).3 250psi (1700 kPa) Pressure Transducer. (27-1633).1 Volume Change Transducer (27-1641).1 1,100 lb. (5 kN) Submersible Load Transducer (27-1573).1 Quick Undrained Triaxial Software (27-1750).1 CU/CD Effective Stress Triaxial Software (27-1760).1 Tri-Flex 2 Master Control Panel (25-0696/0x or
25-0697/0x).1 Tri-Flex 2 Water De-airing Tank System (25-0698).1 Digital Tritest 50 Load Frame (25-3518/0x).
1 Triaxial Cell (25-4117).1 2.8” or 70 mm Base Pedestals (25-4178 or 25-4176).1 2.8” or 70 mm Specimen Caps (25-6630 or 25-6430).2 2.8” or 70 mm Drainage Lines (25-6430/10).1 2.8” or 70 mm Porous Stones. Pack of 2 (25-6721 or
25-6561).1 2.8” (70 mm) Sealing Rings. Pack of 10 (25-6641).1 2.8” (70 mm) Filter Paper Drains. Pack of 50 (25-6580).1 2.8” (70 mm) Filter Paper Discs. Pack of 100 (25-6585).2 2.8” (70 mm) Rubber Membranes. Pack of 10 (25-6441).1 2.8” (70 mm) O-ring Placing Tool (25-6470).1 2.8” (70 mm) Membrane Tester (25-6443).1 2.8” (70 mm) Two-Part Split Mold (25-6690).1 2.8” (70 mm) Suction Membrane Device (25-6480)1 2.8” (70 mm) Two-Way Split Former (25-6680 or 25-6500)
EI2020/02. 110vAC, 50/60Hz, 1ø. English.EI2020/01. 220vAC, 50/60Hz, 1ø. English.EI2021/02. 110vAC, 50/60Hz, 1ø. Metric.EI2021/01. 220vAC, 50/60Hz, 1ø. Metric.
Tri-Flex 2 One-Cell Triaxial Test SetASTM D-2850, D-4767;AASHTO T-296, T-297.
The Tri-Flex 2 One-Cell Triaxial Test Set is designed for triaxial testing of 2.8” or 70 mm diameter specimens.
Ordering InformationSet Includes:1 Tri-Flex 2 Master Control Panel (25-0696/0x or
25-0697/0x).1 Tri-Flex 2 Water De-airing Tank System (25-0698).1 Digital Tritest 50 Load Frame (25-3518/0x).1 Proving Ring, 1,000 lb. (4.5 kN) (78-0260).1 Strain Dial Indicator (88-4100 or 25-4210).1 Digital Pressure Gauge (27-1620).1 Triaxial Cell (25-4117).3 No-Volume Change Valves (25-4520).1 2.8” or 70 mm Base Pedestal (25-4178 or 25-4176).1 2.8” or 70 mm Specimen Cap (25-6630 or 25-6430).2 2.8” or 70 mm Drainage Lines (25-6430/10).1 2.8” or 70 mm Porous Stones. Pack of 2 (25-6721 or
25-6561).1 2.8” (70 mm) Sealing Rings. Pack of 10 (25-6641).1 2.8” (70 mm) Filter Paper Drains. Pack of 50 (25-6580).1 2.8” (70 mm) Filter Paper Discs. Pack of 100 (25-6585).2 2.8” (70 mm) Rubber Membranes. Pack of 10 (25-6441).1 2.8” (70 mm) O-ring Placing Tool (25-6470).1 2.8” (70 mm) Membrane Tester (25-6443).1 2.8” (70 mm) Two-Part Split Mold (25-6690).1 2.8” (70 mm) Suction Membrane Device (25-6480).1 2.8” (70 mm) Two-Way Split Former
(25-6680 or 25- 6500).EI2000/02. 110vAC, 50/60Hz, 1ø. English.EI2000/01. 220vAC, 50/60Hz, 1ø. English.EI2001/02. 110vAC, 50/60Hz, 1ø. Metric.EI2001/01. 220vAC, 50/60Hz, 1ø. Metric.
Pressure Transducer
De-airing block aids in removal of entrappedair in system. Supplied complete with calibration certificate.
The Pressure Transducers are used to measure the cell, pore and back pressures during triaxial testing. The assembly is supplied complete with a de-airing block, valve, 5-pin DIN plug connector and calibration certificate.
Specifications
Construction. Stainless Steel.
Excitation. 10vDC.
Thread. 1/4 BSP.
Ordering InformationEL27-1633. Pressure Transducer, 250 psi (1700 kPa).
Transducer Extension Cable
High quality insulated cable.
Wired with a 5-pin DIN type plug at one end and a 5-pin DIN type socket at the other, these extension cables are used to increase the length of any ADU transducer cable.
Ordering InformationEI27-1717. 10 ft. (3.05 m) long.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
10
Soil Testing - Triaxial
For quotations and product pricing go to www.eleusa.com
11
Soil Testing - Triaxial
Digital Tritest 50 Load FrameASTM D-2850, D-4767;AASHTO T-296, T-297.
Microprocessor controlled. 11,200 lbf. (50 kN) maximum load capacity. Fully variable loading speeds from 0.399999”(9.99999 mm) per minute to as low as 0.000001”(0.00001 mm) per minute. Large LCD screen display with touch-sensitive keypad. Rapid approach
The new Digital Tritest 50 provides the geotechnical testing laboratory with a modern and versatile triaxial load frame to meet current and future laboratory testing needs.
Benefiting from the latest in microprocessor technology, the Digital Tritest 50 is capable of applying test loads up to 11,200 lbf. (50 kN) at any test speed within the range of 0.399999” (9.99999 mm) per minute to as low as 0.000001” (0.00001 mm) per minute.
The Digital Tritest 50’s unique drive system performs with virtually no vibration as the test loads are applied, regardless of the testing speed selected.
All load frame functions including speed selection, loading and unloading, rapid approach and return, along with additional mode selections for setting datum points or remote computer operation are easily accomplished by the loader’s LCD display and keypad system .
Specifications
Capacity. 11,200 lbf. (50 kN).
SpeedRange.
English mode: 0.000001 to 0.399999 in/min.Metric mode: 0.00001 to 9.99999 mm/min.
RapidApproachSpeed.
2.0 in/min. (50 mm/min.).
Platen Travel. 3.9” (100 mm); limit switch protection.
VerticalClearance.
35.8” (910 mm) maximum; 12” (305 mm) minimum.
HorizontalClearance.
14.3” (364 mm).
SerialInterface.
RS232C; programmable baud rate and protocol.
OverallDimensions.
19.7” w. x 19.7” d. x 57.8” h. (500 x 500 x 1,470 mm).
Weight. Net 220 lbs. (100 kg); Shpg. 225 lbs. (102 kg).
Ordering InformationShown with triaxial cell, load and strain measurement accessories; not included, order separately.
EI25-3518/02. 110-120vAC, 50/60 Hz, 1ø, 300 Watts.
EI25-3518/01. 220-240vAC, 50/60 Hz, 1ø, 300 Watts.
AccessoriesEI88-4100. Axial Strain Dial Indicator. 1.0” range x 0.001” divisions.
EI25-4210. Axial Strain Dial Indicator. 25 mm range x 0.01 mm divisions.
EI78-0060. Proving Ring. 450 lb. (2 kN) capacity.
EI78-0160. Proving Ring. 650 lb. (3 kN) capacity.
EI78-0260. Proving Ring. 1,000 lb. (4.5 kN) capacity.
EI78-0460. Proving Ring. 2,250 lb. (10 kN) capacity.
EI78-0760. Proving Ring. 6,000 lb. (28 kN) capacity.
EI78-0860. Proving Ring. 11,200 lb. (50 kN) capacity.
EI27-1108/02. 2 Channel Digital Readout, less Transducers to be ordered separately. English units.
EI27-1109/02. 2 Channel Digital Readout, less Transducers to be ordered separately. Metric units.
See Data Acquisition section for electronic load and axial strain measurement options.
Versa-LoaderTM
ASTM D-2850;AASHTO T-296.
10,000 lbf. (45 kN) maximum load capacity. Accurate loading speeds from 0.08” (2.032 mm) to aslow as 0.001” (0.025 mm) per minute. Push-button Up-Down-Stop operation with overtravellimit switch protection. Highly versatile — can be used for Quick UndrainedTriaxial, Unconfined Compression and CBR testingwith proper accessories.
The Versa-LoaderTM fills the need for any laboratory, school or other testing facility that must have an accurate yet economical load frame capable of performing a wide range of test procedures.
The basic loader consists of a control box, motor, load screw, vertical tie rods and crosshead. Register symbols located on the hand adjustable locknuts assure that the crosshead is parallel with the platen. The unit is designed for load applications up to 10,000 lbf. (45 kN) at any speed within the range of 0.08” (2.032 mm) per minute down to as low as 0.001” (0.025 mm) per minute.
With its wide range of accessories, the Versa-LoaderTM
can be outfitted for Quick Undrained Triaxial, Unconfined Compression, CBR and Soil Cement testing in accordance with ASTM and AASHTO testing standards.
Specifications
Capacity. 10,000 lbf. (45 kN).
SpeedRange.
0.001” to 0.08” (0.025 to 2.032 mm) per minute.
Platen Travel. 2.5” (64 mm); limit switch protection.
VerticalClearance.
33” (838 mm) maximum.
HorizontalClearance.
10” (254 mm).
Controls. Push-button “Up-Down-Stop” with running and travel limit indicator lights; Speed control knob.
OverallDimensions.
13.5” w. x 23” d. x 51” h. (343 x 584 x 1,295 mm).
Weight. Net 185 lbs. (84 kg).
Ordering InformationShown with triaxial cell, load and strain measurement accessories; not included, order separately.separately.
EI25-3525/02. 110-120vAC, 50/60 Hz, 1ø.
EI25-3525/01. 220-240vAC, 50/60 Hz, 1ø.
AccessoriesEI27-1108/02. 2 Channel Digital Readout, less Transducers to be ordered separately. English units.
EI27-1109/02. 2 Channel Digital Readout, less Transducers to be ordered separately. Metric units.See Data Acquisition section for electronic load and axial strain measurement options.
See Unconfined Compression and CBR sections of catalog for the respective test accessories used with the Versa-Loader. TM
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
12
Soil Testing - Triaxial
For quotations and product pricing go to www.eleusa.com
13
Soil Testing - Triaxial
Triaxial CellASTM D-2850,D-4767;AASHTO T-296,T-297; BS-1377.
Working pressuresup to 250 psi(1,700 kPa). All aroundvisibility. AcceptsSubmersible LoadTransducer.
ELE Triaxial Cells are designed to meet the requirements of the modern soils laboratory. Three quick release tie rods are used to attach the cylinder and head assembly to the base.
Each cell has five base ports; two for top drainage backpressure, two for bottom drainage/pore pressure, and one for confining pressure. Two no-volume change valves and an anvil for strain indicator/transducers are supplied as standard.
Specifications
Max. Working Pressure. 250 psi (1,700 kPa).
Max. Piston Load. 10,100 lbf. (45 kN).
Max. Specimen Size. 2.8” (70 mm) diam. x 5.6” (140 mm) l.
Required Clearance. 17” (430 mm) vertical; 7.1” (180 mm) horizontal.
Weights. Net 16 lbs. (7.3 kg).
Ordering InformationShown with base pedestals; not included, order separately.EI25-4117. 3” (70 mm) Triaxial Cell.
AccessoriesEI25-4520. No-Volume Change Valve.
EI25-4200. Piston Restraint Clamp.
EI25-4170. 1.4” (35 mm) Base Pedestal.
EI25-4176. 70 mm Base Pedestal.
EI25-4178. 2.8” Base Pedestal.
EI25-4250. 1.4” (35mm) Specimen Cap.
EI25-6430. 70 mm Specimen Cap.
EI25-6630. 2.8” Specimen Cap.
EI25-5050/10. Drainage Line for 25-4250.
EI25-6430/10. Drainage Line for 25-6430.
Tri-Flex 2 Triaxial CellASTM D-2850, D-4767,D-5084;AASHTO T-296, T-297. T-296, T-297.
Working pressures up to150 psi (1,034 kPa). Low friction pistonassembly. All around visibility. Accepts a wide range ofplaten sizes.
The Tri-Flex 2 Triaxial Cell consists of an aluminum alloyaluminum alloy alloy head assembly with a piston assembly that features the use of linear bearings for virtually, friction-free movement.
Optional specimen caps and base pedestals, for specimens 1.4” (35 mm) to 4” (102 mm) in diameter can easily be tested.
Specifications
Max.WorkingPressure.
150 psi (1,034 kPa).
Max. PistonLoad.
10,100 lbf. (45 kN).
HeadAssembly.
Anodized aluminum with quick-disconnect fill/ventaluminum with quick-disconnect fill/vent with quick-disconnect fill/vent port and dial gauge support assembly.
PistonAssembly.
Sealed, with linear bearings and piston locking clamp.
BaseAssembly.
Stainless steel with four stainless steel no-volume change ball valves at inflow and outflow ports and one brass ball valve at the lateral port. All included tubing is of either stainless steel or TeflonTeflonconstruction.
Dimensions. Approx. 8” diam. x 18” h. (203 x 458 mm) excluding valves.
Weight. Net 25 lbs. (11.3 kg).
Ordering InformationEI25-4159. 4” Triaxial Cell, less accessories order separately.
Replacement PartsT-780. Spare Triaxial Cell Top for E125-4159
AccessoriesEI25-4159/10. 1.4” Acrylic Specimen Cap and Base Pedestal Set.
EI25-4159/11. 2.8” Acrylic Specimen Cap and Base Pedestal Set.
EI25-4159/12. 4.0” Acrylic Specimen Cap and Base Pedestal Set.
Triaxial Testing AccessoriesSpecimen Diameter Diameter
1.4” (35 mm) 70 mm 2.8” 100 mm 4.0”
Porous Stones(Pack of 2) EI25-4461 EI25-6561 EI25-6721 EI25-7661 EI25-7761
Sealing Rings(Pack of 10) EI25-4281 EI25-6461 EI25-6641 EI25-7631 EI25-7631
Filter PaperDrains (Packof 50)
EI25-4880 EI25-6580 EI25-6580 EI25-7670 EI25-7670
Filter PaperDiscs(Pack of 100)
- EI25-6585 EI25-6585 - -
MembraneTesters
EI25-4263 EI25-6443 EI25-6443 EI25-7623 EI25-7623
RubberMembranes(Pack of 10)
EI25-4261 EI25-6441 EI25-6441 EI25-7621 EI25-7621
Length: 5.9” (150 mm) 9.8” (250 mm) 9.8” (250 mm) 13” (330 mm) 13” (330 mm)
Thickness: 0.012” (0.3 mm) 0.016”(0.4 mm) 0.016” (0.4 mm) 0.02” (0.5 mm) 0.02” (0.5 mm)
Two-Way SplitFormers
EI25-4330 EI25-6500 EI25-6680 EI25-7650 -
Two-Part SplitMold
EI25-4320 - EI25-6690 - -
SuctionMembraneDevice
EI25-4300 EI25-6480 - EI25-7640 EI25-7640
O-Ring PlacingTools
EI25-4290 EI25-6470 EI25-6470 EI25-7610 EI25-7610
All porous stones have a high permeability to water in the order of 2 x 10-8 m/s and a very low air-entry value.porous stones have a high permeability to water in the order of 2 x 10-8 m/s and a very low air-entry value. stones have a high permeability to water in the order of 2 x 10-8 m/s and a very low air-entry value.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
14
Soil Testing - Triaxial
For quotations and product pricing go to www.eleusa.com
15
Soil Testing - Triaxial
Tri-Flex 2 Master Control Panel
Three independent channels of pressure control. Digital pressure display system to an accuracy of± 0.25% of reading within range. User-friendly burette system. Easy removal of burette/annulus assembly forcleaning. Bridging feature to set multiple burette pressures withone regulator. Quick disconnects for easy system setup. Easily expands for multi-cell test.
Straightforward in design, the Tri-Flex 2 Master Control Panel meets the demands for an accurate, yet simple-to-operate panel system for use in triaxial and permeability testing. The panel is easy to operate, with a limited number of controls and an easy-to-read digital pressure display system. Fast, easy connection and removal of additional system components allow quick system setup.
The operator has complete control of system pressure and flow measurements during specimen testing, with three independently-controlled pressure regulators – one for confining or cell pressure; one for lower or pore/head pressure; and one for upper or back/tail pressure. The bridging feature lets the operator quickly set the pressures of multiple burette systems with just one regulator.
Each burette/annulus assembly has a selector which opens or closes the access to the annulus. When opened, up to 400 ml of water is available to the operator for specimen saturation and other test stages without refilling the burette assembly. By a simple flip of a switch to activate the digital pressure display system, any of the regulated pressures can be displayed in digital form to an accuracy of ± 0.25% of reading within range.
The Tri-Flex 2 Master Control Panel is designed in full compliance with ASTM and AASHTO specifications for use in the application, monitoring and data recording of test conditions.
Specifications
MeasurementRange.
10-4 to 10-10 cm/sec.
MasterRegulator.
2 to 150 psi (14-1,034 kPa), dual scale.
Master PressureGauge.
2 to 160 psi (14-1,103 kPa), dual scale.
Master VacuumGauge.
0 to -30 inches of Hg (0-100 kPa), dual scale.
Digital PressureMeter.
English: 2 to 150 psi range; ± 0.1 psi; ± 0.25%accuracy full scale.Metric: 14 to 1,034 kPa range; ± 1 kPa; ± 0.25% accuracy full scale.
Burette PressureRegulators.
Three; 2 to 150 psi (14-1,034 kPa).
Burette/Annulus.
Three; 25/400 ml capacity with 0.1 ml burette graduations.
UtilitiesRequired.
Water, vacuum, air pressure, drain and AC power supply.
Dimensions. 21” w. x 36-3/4” h. x 7” d. (17” d. with legs);(533 x 933 x 178 mm).
Weight. Net 50 lbs. (22.7 kg).
Ordering InformationEI25-0696/02. English. 110vAC, 50/60 Hz, 1ø.
EI25-0696/01. English. 220vAC, 50/60 Hz, 1ø.
EI25-0697/02. Metric. 110vAC, 50/60 Hz, 1ø.
EI25-0697/01. Metric. 220vAC, 50/60 Hz, 1ø.
AccessoriesEI25-0698. Water De-Airing Tank System.
EI25-0699. Auxiliary Control Panel.
EI88-3110/02. Compressor Vacuum.
Tri-Flex 2 Auxiliary Control Panel
Increases testing capacity of the system. Provides six independent control pressure regulatorsfor complete flexibility while testing multiple samples. Simple flip switch displays pressure setting foreach regulator on the Master Control Panel digital“Pressure Meter” display. Bridging feature allows user to set pressure on two tosix burette channels using one regulator.
For greater productivity in the laboratory, Tri-Flex 2 Auxiliary Control Panels are designed to increase the Tri-Flex 2 System’s testing capacity without duplicating the major control functions and pressure displays of the Master Control Panel. The panels work with the Master Control Panel to provide the overall system with the capacity to test from three to five specimens at one time — each with its own independent pressure settings.
Specifications
MeasurementRange.
10-4 to 10-10 cm/sec.
Burette PressureRegulators.
Six; 2 to 150 psi (14-1,034 kPa).
Burette/Annulus. Six; 25/400 ml capacity with 0.1 ml burette graduations.
Utilities Required. Water, vacuum, air pressure and drain through connection to the Master Control Panel.
Dimensions. 27” w. x 36-3/4” h. x 7” d. (17” d. with legs); (686 x 933 x 178 mm).
Weight. Net 80 lbs. (36.3 kg).
Ordering InformationEI25-0699.
AccessoriesEI25-0698. Water De-Airing Tank System.
EI25-0699. Auxiliary Control Panel.
One Tri-Flex 2 Master Control Panel is required for system operation.
Tri-Flex 2 Water De-Airing Tank System
Economical means of creating de-aired water. Constructed of clear acrylic for easy viewing. Pressure relief valve for operator safety.
Designed for use with the Master Control Panel, the Water De-Airing Tank System allows the user to inexpensively prepare de-aired water for the system. The unit is supplied complete with all necessary connectors and tubing for easy addition to the Tri-Flex 2 Master Control Panel.
Specifications
Construction. Clear acrylic construction with stainless steel threaded clamping rods.
Seals. O-ring, top & bottom.
Relief Valve. Preset at 10 psi (69 kPa).
Capacity. 1.4 gals. (5.3 liters). liters).
Dimensions. 6” diam. x 16” (152.4 x 406.4 mm).
Weight. Net 7.5 lbs. (3.4 kg).
Ordering InformationEI25-0698.
Requires Master Control Panel for operation.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
16
Soil Testing - Triaxial
For quotations and product pricing go to www.eleusa.com
17
Soil Testing - Permeability
DigitalPressureGaugeASTM D-4767,D-5084;AASHTO T-296, T-297.
250 psi(1,700 kPa)capacityrange. LCD displaywith tare,reset andpeak holdfunctions. Swivelhandleassemblyfor easytransport and viewing angle adjustment. Supplied complete with de-airing block assembly andfittings for use on ELE/Soiltest triaxial or permeabilitytest cell.
The accurate monitoring and measurement of pore water pressures within a test specimen are necessary during effective stress triaxial tests, or for determining the level of saturation (“B” parameter) during the saturation stages of triaxial and permeability testing.
The Digital Pressure Gauge has been specifically designed to meet these accurate measurement requirements.
The readout features a bright LCD display that updates twice every second. Each system is supplied complete with a highly stable pressure gauge with de-airing block assembly for fast connection to any ELE/Soiltest triaxial or permeability test cell.
Specifications
Capacity. 250 psi (1,700 kPa).
Display. LCD.
Display Units. PSI, kPa, MPa.
Accuracy. Better than 1% of indicated pressure.
Read Rate. Two samples per second.
Power Supply. 3 volt battery, CR 2340 type.
Battery Life. 1400 hours continuous operation.
Dimensions. 2.30” w. x 1.25” d. x 3.75” h. (59 x 32 x 95 mm.
Weight. Net 1/4 lb. (125g).
Ordering InformationEI27-1620. For ELE Triaxial Cells.
EI27-1621. For Tri-Flex 2 Triaxial and Permeability Cells.
Digital Load and Displacement Readout
Easy to install on the Tritest 50 series load frame. Accurately displays both load and axial strain values.Available in either English or Metric display models.
Accurate monitoring and recording of load and axial displacement of the specimen are easily accomplished by means of the Digital Load and Displacement Readout.
Available in either English or Metric models, the series features a two channel digital readout unit
Specifications
Displays. Two, 4-digit red 14 segment LED displays.
Display Units. English models in lbf and inches; Metric models in kN and mm.
Read Rate. Three samples per second; automatic polarity.
Warm-Up Time. 30 minutes for rated accuracy.accuracy..
Operating Temp. 32ºF - 120ºF (0ºC - 50ºC).
Dimensions. 9.3” w. x 9.3” d. x 3.2” h. (236 x 236 x 81.3 mm).
Weight. Net 8 lbs. (3.6 kg).
Ordering InformationEI27-1108/02. Two channel Digital Readout, less transducers to be ordered separately. English units.
EI27-1109/02. Two channel Digital Readout, less transducers to be ordered separately. Metric unitsSee pages 6 and 7 for detail of load and displacement transducers.
Tri-Flex 2 One-CellPermeability Test SystemASTM D-2850, D-4767, D-5084;AASHTO T-296, T-297.
With the Tri-Flex 2 One-Cell Permeability Test System, efficient and accurate permeability testing of a wide range of construction materials can easily be conducted.
The complete one-cell system consists of the Tri-Flex 2 Master Control Panel with water de-airing system, one Tri-Flex 2 Permeability Test Cell complete with platens for testing either 2.8” or 70 mm diameter specimens, and a complete range of sample preparation tools.
Ordering Information1 Tri-Flex 2 Master Control Panel (25-0696/0x or
25-0697/0x).1 Tri-Flex 2 Water De-airing Tank System (25-0698).1 Tri-Flex 2 Permeability Test Cell (25-0690).1 2.8” or 70 mm Acrylic Cap and Base Set (25-0690/15 or
25-0690/10).1 2.8” or 70 mm Porous Stones, pack of 2 (25-6721 or
25-6561).1 2.8” or 70 mm Membrane Sealing Rings, pack of 10
(25-6641 or 25-6461).1 2.8” (70 mm) Membranes, pack of 10 (25-6441).1 2.8” (70 mm) O-ring Placing Tool (25-6470).1 2.8” (70 mm) Membrane Tester (25-6443).1 2.8” or 70 mm Suction Membrane Device (25-6480).
Permeability testing using DatasystemIdeal for educational purposes the items listed below used in conjunction with the Triflex 2 one cell permeability system enable automatic logging and reporting of results.
Ordering information27-1495/02. ADU.27-1633. Pressure transducer. 3 required.27-1641. Volume change transducer. 2 required.27-1765. Permeability Software.Software complies with BS 1377 only.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
18
Soil Testing - Permeability
For quotations and product pricing go to www.eleusa.com
19
Soil Testing - Permeability
Tri-Flex 2 Permeability Test CellASTM D-5084.
Corrosion resistant construction.Double drainage lines. Accepts a wide range of samples.
The Tri-Flex 2 Permeability Test Cell incorporates many new features that promote ease in specimen preparation and installation. The cell consists of an aluminum alloy head assembly and a stainless steel base for corrosion resistance and long service life. Stainless steel no-volume change type valves at all specimen inflow and outflow ports provide additional corrosion resistance and prevention of pressure changes during permeability test procedures.
Through the use of the cell’s optional Platen Sets, the Tri-Flex 2 Permeability Test Cell can accept specimens ranging in size from 1.4” (35 mm) to as large as 4” (102 mm) in diameter. Depending on test requirements, all Platen Sets are available in acrylic.
Specifications
Specimen Size. 1.4” (35 mm) to 4” (102 mm) diam. using optional Cap and Base Sets, not included.
Head Assembly. Anodized aluminum with quick-disconnect fill/vent port and three clamping rods.
Base Assembly. Stainless steel with four stainless steel no-volume change ball valves for inflow and outflow ports and one brass no-volume change ball valve for lateral port.
Cylinder. Clear acrylic.
Max. Pressure. 150 psi (1,034 kPa).
Tubing. Teflon and stainless steel.
Dimensions. Approx. 8” diam. x 15” h. (203 x 381 mm). Excluding valves.
Weight. Net 23 lbs. (10.4 kg).
Ordering InformationEI25-0690.
Permeability Cell Accessories
Cap & Base Sets: Acrylic
1.4” (35 mm) EI25-0690/13
2.416” EI25-0690/14
2.8” EI25-0690/15
70 mm EI25-0690/10
4.0” EI25-0690/17
Porous Stones (Pack of 2):
1.4” (35 mm) EI25-4461
2.416” EI25-5661
70 mm EI25-6561
2.8” EI25-6721
100 mm EI25-7661
4.0” EI25-7761
Sealing Rings (Pack of 10):
1.4” (35 mm) EI25-4281
2.416” EI25-5663
70 mm EI25-6461
2.8” EI25-6641
4.0” (100 mm) EI25-7631
Rubber Membranes (Pack of 10):
1.4” (35 mm) EI25-4261
2.416” EI25-5665
2.8” (70 mm) EI25-6441
4.0” (100 mm) EI25-7621
Guelph PermeameterASTM D-5126.
Lightweight and portable for easy transportation.Test time of two hours or less.Requires only 2.5 liters of water.
The Guelph Permeameter is a constant head permeameter that measures in-situ hydraulic conductivity. It is a simple to operate, portable unit that requires very little training to use. Only one person is needed to perform the test.
The method involves measuring the steady-state rate of water recharge into unsaturated soil from a cylindrical well hole, in which a constant head of water is maintained. Calculations are made to determine the hydraulic conductivity, soil sorptivity and soil matrix flux potential. Depending on the soil type, tests can take between 1/2 hour and 2 hours using only 2.5 liters of water.
Specifications
Permeameter. High impact polycarbonate, molded elastomers.
Auger. 2” (50.8 mm) diam.; machined steel.
Carrying Case. Die-cut foam for parts storage.
Test Time. 1/2 – 2 hours.
Test Depth. 15 to 75 cm (0.5 to 2.5 ft).
HydraulicConductivity Range.
10-4 to 10-8 m/sec (10-2 to 10-6 cm/sec).
Weight. Net 30 lbs. (13.6 kg).
Ordering InformationEI25-0650.
AccessoriesEI25-0655. Permeameter Extension Kit. 31-1/2” (800 mm) long. Increases test depth to 155 cm (5.16 ft).
Double Ring InfiltrometerASTM D-3385.
Determines infiltration rate of various soils. Heavy-duty aluminum rings for rust resistance andlong life.Graduated Mariotte tubes for inner and outer rings.
The Double-Ring Infiltrometer provides comparative information that is useful for determining erosion rates, leaching and drainage efficiencies, irrigation patterns, rainfall and evaluation of potential septic tank disposal fields.
The instrument consists of two concentric rings, driving cap, two graduated Mariotte tubes, square neoprene splash guards and complete instructions. The two rings are driven into the ground and filled with water. The outer ring acts as a barrier to encourage only vertical flow from the inner ring.
Specifications
Rings. Aluminum; two included, 12” i.d. x 20” h. (305 x 508 mm) and 24” i.d. x 20” h. (610x 508 mm).
Driving Cap. Aluminum; 1/2” (12.7 mm) thick; with centering pins.
Splash Guards. Neoprene; two included; 6” (152 mm) square.
Mariotte Tubes. Graduated; two included; 3,000 ml and 10,000 ml capacities.
Weight. Net 70 lbs. (31.7 kg); Shpg. 90 lbs.(40.8 kg).
Ordering InformationEI25-0660.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
20
Soil Testing - Permeability
For quotations and product pricing go to www.eleusa.com
21
Soil Testing - Permeability
Constant HeadSand/GravelPermeametersASTM D-2434.
Meets ASTM D-2434Test Specifications. Supplied complete withtubing and hardware. Accessory ManometerPanel and ConstantHead Tank Assemblies.
The Sand/Gravel Permeameter is used specifically for testing the permeability of granular soils. Manufactured in accordance with ASTM D-2434 test specifications, the permeameter is designed to provide accurate results when performing the constant head test method for the laminar flow of water through granular materials.
Each permeameter comes equipped with valves, porous stones and tubing for connection to a water source, vacuum, and manometer tubes. To prevent soil density changes during the test, a spring is incorporated in the top cap to apply 5 to 10 lbf. (2.2 to 4.5 kg) against the top porous stone.
Two manometer ports are grooved and screened on the inside of the chamber. The screens prevent material from migrating through the valves and tubing during testing. The acrylic chamber permits viewing of the sample during testing. The end caps and clamping ring are constructed of anodized aluminum for rust resistance and long service life.
Specifications
Construction. Anodized aluminum end caps and clamping ring acrylic chamber.
Manometer Ports. Two. Located on the acrylic chambers side wall. The distances between ports are equal to the diameter.
Clamping Rods. Three; quick release type.
Weights. Net 7-12 lbs. (3.2-5.4 kg).
Ordering InformationManometer Panel and Constant Head Tank System; not included, order separately.EI25-0562. 3.0” (76 mm) i.d.
AccessoriesEI25-0567. Wall Mounted Manometer Panel.
EI25-0568. Constant Head Tank System.
Manometer PanelASTM D-2434.
The Manometer Panel features two acrylic tubes and valving mounted on an aluminum rail with a 100 cm long dual-graduated scale. Each tube has its own valve, making it possible to run two independent permeability tests.
Specifications
Scale. 100 cm long with cm and mm graduations.
Rail. Aluminum construction with holes for wall mounting.
Flow Tubes. Acrylic; each with its own flow control valve.
Weights. Net 7 lbs. (3.2 kg).
Ordering InformationEI25-0567.
Constant Head Tank SystemASTM D-2434.
The system consists of an acrylic tank with regulating valve for flow control of water. A porous media is used at the bottom of the tank to filter out air bubbles.
The unit maintains a constant water head by utilizing an overflow port. It also allows for connection to a tap water or de-aired water source. A wall mounting support, consisting of two rails with adjustable height brackets and tubing for connection between the tank and permeameter is included.
Specifications
Tank. 1000 cc. capacity, Clear acrylic with regulating valve.
Other Components. Wall mount, tubing and saddle valve.
Weights. Net 8 lbs. (3.6 kg).
Ordering InformationEI25-0568.
CompactionPermeameters
Availablein either 4”(101.6 mm)or 6” (152.4mm) diametermodels. Sturdyconstruction fortesting all typesof materials. Overflowvalve assemblypermits easy airremoval beforetesting.
Compaction Permeameters are designed for performing either constant head or falling head permeability tests on undisturbed, remolded or compacted soils.
Specifications
Mold. Machined seamless steel tubing; plated.
Capacity. EI25-0618: 1/30 cu. ft.; 4” i.d. x 4.584” h. (101.6 x 116.4 mm).EI25-0619: 0.1145 cu. ft.; 6” i.d. x 7” h. (152.4 x 177.8 mm).
Collar. 2” h. (50.8 mm); machined seamless steel tubing; fits either end of mold; plated.
Top. Cast aluminum; with overflow valve assembly and water connection.
Base. Cast aluminum; with inlet/outlet fitting.
Porous Stone. EI25-0618: 4” diam. x 1/2” thick (101.6 x 12.7 mm).EI25-0619: 5-15/16” diam. x 1/2” thick (150.8 x 12.7 mm).50-70 permeability rating; 225 micron, average pore size.
Weights. EI25-0618: Net 12 lbs. (5.4 kg).EI25-0619: Net 24 lbs. (10.9 kg).
Ordering InformationEI25-0618. Compaction Permeameter, 4” (101.6 mm).
EI25-0619. Compaction Permeameter, 6” (152.4 mm).
AccessoriesEI25-0620. Constant and Falling Head Accessory Kit. Includes a burette and meter stick for falling head tests and a constant head funnel both mounted on a support stand.
Replacement partsT-324 Porous Stone for 25-0619
T-319 Porous Stone for 25-0618
CombinationPermeameterConstant orFalling Head
Plated steel chamber headassembly. Rust-resistant cast aluminumbase assembly. Includes accessories forconducting both constantand falling head permeabilitystudies.
The Combination Permeameter is designed for laboratory determinations of permeability of either fine-grained or coarse-grained soils. Generally, soils containing 10 percent or more particles passing a no. 200 sieve are tested using the falling head assembly. More granular soils, containing 90 percent or more particles retained on the no. 200 sieve, are tested using the constant head assembly.
In constant head permeability testing, a plastic funnel reservoir with overflow port is mounted on an upright attached to the chamber head. A maximum head of up to 55 cm is possible by placement of the reservoir on the upright.
Falling head permeability studies are possible using the graduated pipette falling head reservoir which has a volume of 100 cc. Maximum head is 100 cm. Clear plastic chamber accepts 2-1/2” (63.5 mm) diameter specimens, ranging from 2-1/2” (63.5 mm) to 5-1/2” (140 mm) long.
Specifications
SpecimenSize.
2-1/2” diam. x 2-1/2” l. max. (63.5 x 63.5 mm) when using lower chamber only; 2-1/2” diam. x 5-1/2” l. max. (63.5 x 140 mm) when using both lower and extension chambers.
Capacity. Clear lucite; 1/4” (6.3 mm) wall; two sections.
Base. Cast aluminum.
Top Seal. Plated steel with gaskets.
PorousStones.
Mounts at top and bottom; 2.47” diam. x 1/2” thick(62.7 x 12.7 mm); 105-120 permeability rating; 300 micron, average pore size.
ConstantHead.
Plastic; funnel reservoir; 55 cm maximum head.
FallingHead.
Graduated pipette; 100 cc x 0.2 cc; 100 cm. maximum head.
Weight. Net 11 lbs. (5 kg).
Ordering InformationEI25-0623.
Replacement partsT-308 Porous Stone 2.47” X .50”
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
22
Soil Testing - Shear
For quotations and product pricing go to www.eleusa.com
23
Soil Testing - Shear
Direct/Residual Shear ApparatusASTM D-3080;AASHTO T-236.
Microprocessor controlled drive system.Large on-board LCD screen display. Direct entry of shear speeds via touch sensitivekeypad.Rapid approach and return to start datum. Fully variable speed control from 0.000001” (0.00001mm) to 0.399999” (9.99999 mm) per minute.
The ELE Direct/Residual Shear Apparatus uses a microprocessor controlled, menu-driven drive system with keyboard entry for precise shear speed setting and control.
The use of a microprocessor controlled drive system and keyboard entry provides the unit with a wide range of features which include pause and speed reset during testing, RS232C interface for computer control, operator programming of speed and control functions, self-test diagnostics and many other features. A return to start datum provides a positive means of reversing the shear box when either preparing for a new test or continuing with residual testing procedures. Safety forward/ reverse travel limit switches are incorporated into the system as standard and are monitored through the electronics.
The electronics are housed in a modern styled shroud, which is adjustable for optimum viewing. The apparatus is enclosed in a durably constructed case and has been designed for bench mounting.
The apparatus is supplied complete with carriage, loading weight hanger and 10:1 lever ratio loading device.
Specifications
Sample Size. Accepts either 2.42”, 2.5” diam.; 60 mm square samples using accessory shear box assemblies, not included.
Speed range. Variable in either English or Metric units between 0.000001”(0.00001 mm) to 0.399999” (9.99999 mm) per minute.
Shear Force. 1,000 lbf. (4.5 kN) maximum.
Vertical Load. 2,200 lbf. (1,000 kN) using 10:1 lever ratio.
Dimensions. 44.7” l. x 12.6” w. x 49.6” h. (1,135 x 320x 1,260 mm).
Weight. Net 181 lbs. (82 kg).
Ordering InformationShear Box, dial indicators, transducers, proving ring or loading weights; not included, order separately.
EI26-2114/02. 110-120vAC, 50/60 Hz, 1ø.
EI26-2114/01. 220-240vAC, 50/60 Hz, 1ø.
AccessoriesSee following page for a complete listing of Shear Box Assemblies.
EI25-0440. Vertical Dial Indicator. Metric.
EI25-0445. Vertical Dial Indicator. English.
EI88-4110. Horizontal Dial Indicator. Metric.
EI88-4100. Horizontal Dial Indicator. English.
EI78-0060. Compression Proving Ring. 450 lb. (2 kN).
EI78-0160. Compression Proving Ring. 650 lb. (3 kN).
EI78-0260. Compression Proving Ring. 1,000 lb. (4.5 kN).
EI25-0535. Weight Set. Set of four 1 kg, five 4 kg and
four 16 kg weights.
EI25-0537. Weight Set. Set of four 1 kg, three 4 kg and
one 16 kg weights.
Shear Box AssembliesASTM D-3080;AASHTO T-236.
All ELE Shear Box Assemblies are designed to fit into the carriage of the EI26-2114 series Direct/Residual Shear Machines. They are supplied complete with two porous stones, one retaining stone and a loading pad. The four sizes offered comply with the relevant ASTM,AASHTO and BS standards. All assemblies can be used for quick shear tests or drained/residual shear test applications.
Ordering InformationEI26-2181. 60 x 60 mm Square Shear Box Assembly.
EI26-2213. 2.5” Diameter Shear Box Assembly.
EI26-2223. 2.42” Diameter Shear Box Assembly. (California Type)
AccessoriesEI26-2185. 60 x 60 mm Square Specimen Cutter.
EI26-2189. 60 x 60 mm Square Specimen Extrusion Tool.
EI26-2217. 2.5” Diameter Specimen Cutter.
EI26-2221. 2.5” Diameter Specimen Extrusion Tool.
Replacement PartsEI26-2181/10. 60 x 60 mm Square Porous Stone.
EI26-2213/10. 2.5” Diameter Porous Stone.
EI26-2223/10. 2.42” Diameter Porous Stone.
Direct/Residual Shear Test SetASTM D-3080;AASHTO T-236.
This test set includes all of the basic equipment required to perform direct/residual shear testing on either 2.5” diameter or 60 mm square soil specimens.
Ordering InformationSet includes:
1 Direct/Residual Shear Apparatus (26-2114/0x).1 2.5” diam. or 60 mm square Shear Box (26-2213 or
26-2181).1 2.5” diam. or 60 mm square Specimen Cutter (26-2217
or 26-2185).1 Vertical Dial Indicator (25-0445 or 25-0440).1 Horizontal Dial Indicator (88-4100 or 88-4110).1 Weight Set (25-0535).
EI2100/02. 110vAC, 50/60 Hz, 1ø. English.
EI2100/01. 220vAC, 50/60 Hz, 1ø. English.
EI2101/02. 110vAC, 50/60 Hz, 1ø. Metric.
EI2101/01. 220vAC, 50/60 Hz, 1ø. Metric.
DataSystem Direct/Residual Shear Test SetASTM D-3080;AASHTO T-236.
This test set includes equipment required to perform direct/residual shear testing on either 2.5” diameter or 60 mm square soil specimens with automated data logging, analysis, and reporting.
Ordering InformationSet includes:1 Direct/Residual Shear Apparatus (26-2114/0x).1 2.5” diam. or 60 mm square Shear Box (26-2213 or
26-2181).1 2.5” diam. or 60 mm square Specimen Cutter (26-2217
or 26-2185).1 ADU 8-Channel Data Acquisition Unit (27-1495/0x).1 Direct/Residual Shear Software (27-1790).1 Vertical Displacement Transducer (27-1689).1 Horizontal Displacement Transducer (27-1697).1 2,000 lb. (8.9 kN) S-Type Load Cell (27-1583).1 Weight Set (25-0535).
EI2102/02. 110vAC, 50/60 Hz, 1ø. English. 2.5” dia sample.
EI2102/01. 220vAC, 50/60 Hz, 1ø. English. 2.5” dia sample.
EI2103/02. 110vAC, 50/60 Hz, 1ø. Metric. 2.5” dia sample. 60mm Sample.
EI2103/01. 220vAC, 50/60 Hz, 1ø. 60mm Sample.Computer hardware and peripherals required for system operation; not included. Contact factory for system requirements.
See Data Acquisition section for specifications of electronic displacement and logging equipment.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
24
Soil Testing - Consolidation
For quotations and product pricing go to www.eleusa.com
25
Soil Testing - Consolidation
Table Top Consolidation ApparatusASTM D-2435, D-4546;AASHTO T-216.
Loading Pressures on 2.5” (63 mm) diameter samplesof up to 48 tons per sq. ft. (5,148 kPa) using 11:1beam ratio. Triple beam ratios of 9:1, 10:1 and 11:1 minimizeloading weight requirements. Rigid frame construction ensures accuracy,repeatability and reliability of test results. Integral beam support jack eliminates possible shockto sample during load application procedures. Compact, table top design for maximum spacesavings in the laboratory. Cast aluminum and plated steel construction for rustresistance and long life.
Consolidation tests are performed in the laboratory to determine the settlement characteristics of soil over a period of time. The data obtained from tests on a small sample in the laboratory can be used to predict the settlement of a foundation under a building, dam, bridge, or similar structure.
The Table Top Consolidation Apparatus is a compact machine designed to provide reliable, accurate and reproducible results. The apparatus features a rigid loading mechanism, capable of applying loads for long durations. Load pressures of up to 48 tons per sq. ft. (5,148 kPa) can be generated on 2.5” (63 mm) diameter samples.
Specifications
LoadCapacity.
48 tons/sq. ft. (5,148 kPa) on 2.5” (63 mm) diam. samples.
LoadingBeam.
Cast aluminum; counterbalanced; 9:1,10:1 and 11:1ratios.
Frame. Cast aluminum; integral beam support jack; plated steel and platform.
Dimensions. 8” w. x 28” d. x 20” h. (203 x 711 x 508 mm), excluding weight hanger.
Weight. Net 30 lbs. (13.6 kg); Shpg. 40 lbs. (18.1 kg).
Ordering InformationShown with consolidometer, dial indicator loading weights and floor mounting stand; not included, order separately.
EI25-0402.
AccessoriesEI25-0429. Floor Mounting Stand.
EI25-0479. 2.5” Fixed Ring Consolidometer. With cutting (specimen) ring.
EI25-0455. 50 mm Fixed Ring Consolidometer. With cutting (specimen) ring.
EI25-0530. 2.5” Floating Ring Consolidometer.
EI88-4070. Dial Indicator. 0.4” range x 0.0001” graduations.
EI88-4080. Dial Indicator. 10 mm range x 0.0025 mm graduations.
EI88-4120. Dial Indicator. 1.0” range x 0.001” graduations.
EI88-4130. Dial Indicator. 25 mm range x 0.010 mm graduations.
EI25-0535. Weight Set A. Includes: four 1 kg, five 4 kg, and four 16 kg weights.
EI25-0537. Weight Set B. Includes: four 1 kg, three 4 kg and one 16 kg weights.
EI25-0544. 16 Ton Weight Set. Includes: two 1/16 ton, one 1/8 ton, one 1/4 ton, one 1/2 ton, one 1 ton and seven 2 ton weights.
DataSystem Consolidation Test SetASTM D-2435, D-4546;AASHTO T-216.
The DataSystem Consolidation Test Set is designed for performing consolidation tests on soils to ASTM and AASTHO standards including options for automated data logging, analysis, and reporting.
Ordering InformationSet includes:1 Table Top Consolidation Apparatus (25-0402).1 Fixed Ring Consolidometer, 2.5” (25-0479).1 Weight Set (25-0535).1 Floor Mounting Stand (25-0429).1 ADU 8-Channel Data Acquisition Unit (27-1495/0x).1 Consolidation Displacement Transducer (27-1649).1 One Dimensional Consolidation Program (27-1770).
EI2230/02. 110vAC, 50/60Hz, 1ø.
EI2230/01. 220vAC, 50/60Hz, 1ø.Computer hardware and peripherals required for system operation; not included. Contact factory for system requirements.
See Data Acquisition section for specifications of electronic displacement and logging equipment.
Pneumatic Consolidation ApparatusASTM D-2435, D-4546;AASHTO T-216.
Instantaneous loading without impact. Complete flexibility in choice of loads. Relatively insensitive to shock or inertia forces. Compact size allows for table top operation withoutthe need for extraneous hanging weight assemblies.
Used worldwide for stress controlled consolidation testing, the Pneumatic Consolidation Apparatus is a pneumatic load frame designed to apply loads instantaneously and to maintain any set load, regardless of sample compression occurring within the loading interval. The unit is self contained with a built-in digital display with 0.25% accuracy.
Available in three load ranges, the load frame uses a dual-piston system for handling loads to 32 tsf while retaining sensitivity in the lower load ranges. A precision, low-bleed type of pressure regulator is used to set and maintain the load on the specimen.
Adjustable centering pads on the load platform aid in aligning the consolidometer and will accept any consolidometer up to a maximum diameter of 7.25” (184 mm). The top loading design eliminates time consuming weight calculations.
Specifications
Construction. Aluminum cabinet with enamel finish; 1” (25.4 mm) thick aluminum load platform plate; stainless steel vertical rods.
MaximumLoad.
32 tsf.
Req. AirPressure.
123 psi (848 kPa).
VerticalClearance.
8.25” (210 mm).
HorizontalClearance.
7.75” (197 mm).
Max. PistonTravel.
0.5” (12.7 mm).
Dimensions. 12” w. x 14.5” d. x 20.5” h. (305 x 368 x 521 mm).
Weight. Net 48 lbs. (21.8 kg).
Ordering InformationShown with consolidometer and dial indicator; not included, order separately.
EI25-0560. Pneumatic Consolidation Apparatus. 32 tsf capacity.
AccessoriesEI25-0479. Fixed Ring Consolidometer. For 2.5” diam. specimens.
EI25-0455. Fixed Ring Consolidometer. For 50 mm diam. specimens.
EI25-0530. Floating Ring Consolidometer. For 2.5” diam. specimens.
EI88-4070. Dial Indicator. 0.4” range x 0.0001” graduations.
EI88-4080. Dial Indicator. 10 mm range x 0.0025 mm graduations.
EI88-4120. Dial Indicator. 1.0” range x 0.001” graduations.
EI88-4130. Dial Indicator. 25 mm range x 0.010 mm graduations.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
26
Soil Testing - Consolidation
For quotations and product pricing go to www.eleusa.com
27
Soil Testing - Consolidation
Fixed Ring ConsolidometersASTM D-2435, D-4546;AASHTO T-216.
Specimen cutting ring for trimming directly fromsample tubes. Integral water reservoir for specimen inundation,when required.
All Fixed Ring Consolidometers are manufactured from corrosion resistant materials and incorporate an integral cutting ring for trimming specimens to size. The design also features an integral water reservoir for specimen inundation. All consolidometers are supplied complete with upper and lower porous stones, pressure pad and specimen cutting ring.
The following table shows typical loading of cells giving unit stress when used with the ELE Table Top Consolidation Apparatus.
Typical Loading:
Model No. EI25-0479 EI25-0455 EI25-0480
Application. ASTM High Pressure California
SpecimenDiameter.
2.5” 50 mm 2.416”
SpecimenArea.
4.909 in2 1963 mm2 4.585in2
Beam Ratio. 10:1 10:1 10:1
Load. 1.55 kg 1 kg 1.45 kg
Stress. 1,000 lbf/ft2 50 kPa 1000lbf/ft2
TypicalMaximumStress.
103,200 lbf/ft2 8 MPa 110,720lbf/ft2
Stress for 1 kg. 645 lbf/ft2 50 kPa 692lbf/ft2
Ordering InformationEI25-0479. Fixed Ring Consolidometer. For 2.5” diam. specimens.
EI25-0455. Fixed Ring Consolidometer. For 50 mm diam. specimens.EI25-048. Fixed Ring Consolidometer. For 2.416” diam. specimens.
AccessoriesEI25-0485. Calibration Disc for EI25-0479.
EI25-0461. Calibration Disc for EI25-0455.
Replacement PartsEI25-0482. Cutting Ring for EI25-0479.
EI25-0458. Cutting Ring for EI25-0455.
EI25-0479/13. Upper and Lower Porous Stones, 2.5”.
EI25-0480/13. Upper and Lower Porous Stones 2.416”.
Floating Ring Consolidometer
Floating type design eliminates friction between soilspecimen and ring. Rust-resistant construction for long service life.
The Floating Ring Consolidometer is designed to eliminate the friction that occurs between the soil specimen and ring in consolidation testing. The unit consists of a one-piece machined base, porous stones, and specimen ring. All metal parts are brass or phosphor bronze. The base is approximately 5” (127 mm) diameter by 3” (76 mm) high.
Specifications
Specimen Size. 2.5” diam. x 1” h. (63.5 x 25.4 mm).
Base. One-piece machined bronze; 5” diam. x 3” h. (127 x 76.2 mm).
Specimen Ring. Machined brass.
Porous Stones. 2-15/32” diam. x 1/2” thick (62.7 x 12.7 mm).
Weight. Net 13 lbs. (5.9 kg).
Ordering InformationEI25-0530.
Replacement PartsEI25-0533. Specimen Ring. For 2.5” (63 mm) diam. samples.
EI25-0530/10. Porous Stone. 2-15/32” diam. x 1/2” thick (62.7 x 12.7 mm).
Expansion Index Test ApparatusASTM D-4829; California UBC 29-2.
Completely self-contained and compact design. Accurate to 0.0001” (0.002 mm). Testing time of 24 hours or less on cured soilspecimens.
The Expansion Index Test Apparatus is a completely self-contained apparatus designed for use in determining the expansion index of soils. Using the new consolidation apparatus, contractors and laboratory technicians can conduct an expansion test on a cured soil specimen in 24 hours or less.
The apparatus is designed to control all of the variables that influence the expansive characteristics of a particular soil while still performing a practical test for general engineering use.
Specifications
Base and Collar. Cast aluminum construction; brass hold-down rods.
Specimen Ring. Stainless steel; 4” i.d. x 1” h. (101.6 x 25.4 mm).
Porous Stones. 4” diam. x 1/2” thick (101.4 x 12.7 mm).
Loading Weight. Brass; 12.6 lbs. (5.7 kg).
Dial Indicator. EI25-0380: 0.3” range x 0.0001” graduations.
Test Duration. 24 hours or less on cured sample.
Dimensions. 6” diam. x 11” h. (152 x 279 mm).
Weight. Net 18 lbs. (8.2 kg).
Ordering InformationEI25-0380. English.
Soil Volume Change Meter
Measures both shrinkage and swelling of soils.Ideal for measuring swelling of clay soils.Fast and easy to operate.
The Soil Volume Change Meter (PVC) is used to evaluate potentially dangerous swelling or shrinking conditions existing in some clay soils used in residential and commercial developments.
The device was originally developed by the Federal Housing Administration after considerable research to provide satisfactory background laboratory testing data, a summarization of mechanisms causing volume change in soils and the factors influencing these changes. PVC refers to the maximum possible volume change that a soil could undergo when subjected to changing moisture conditions.
Specifications
Mold Assembly. Includes porous stones and loading cap.
Proving Ring. 1,000 lb. (4.5 kN) capacity; dial indicator.
OtherComponents.
Loading pistons; compaction hammer.
Specimen Ring. 2-3/4” (70 mm) diam.
Water Required. 5 oz.
Charts. Convert readings to lbs./sq. ft. and then to PVC(Potential Volume Change) rating.
Dimensions. 7-1/4” diam. base x 15-1/2” h. (184 x 394 mm).
Weight. Net 25 lbs. (11.3 kg).
Ordering InformationEI25-0390.
Replacement parts9417-0001. Porous Stone (2.74” x 0.4”)
9417-0006. Porous Stone ( 3.0” x .5”).
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
28
Soil Testing - Unconfined Compression
6 For quotations and product pricing go to www.eleusa.com
29
Soil Testing - Compaction
Versa-LoaderTM
ASTM D-2166;AASHTO T-208.
10,000 lbf. (45 kN) maximum load capacity. Accurate loading speeds from 0.08” (2.032 mm) to aslow as 0.001” (0.025 mm) per minute. Push-button Up-Down-Stop operation with overtravellimit switch protection. Highly versatile — can be used for Quick UndrainedTriaxial, Unconfined Compression, CBR and SoilCement testing with proper accessories.
Please refer to page 11 for complete specifications on the Versa-LoaderTM series load frame.
Shown with unconfined compression test digital readout set; not included, order separately.
Ordering InformationEI25-3525/02. 110-220vAC, 50/60 Hz, 1ø.
E125-3525/01. 220-240vAC, 50/60 Hz, 1ø.
AccessoriesEI25-3997. Unconfined Compression Test Accessory Set, English. Includes: platens, 1.0” range dial indicator and 500 lb. capacity proving ring.
EI25-3998. Unconfined Compression Test Accessory Set, Metric. Includes: platens, 25 mm range dial indicator and 2.2 kN capacity proving ring.
EI27-1121/02. Unconfined Compression Test Digital Readout Set, English. 110vAC, 50/60 Hz,1ø. Includes: 2-channel digital readout, 500 lb. capacity S-type load cell, axial strain transducer with 2” range, platens and mounting hardware.
EI27-1121/01. Unconfined Compression Test Digital Readout Set, English. 220vAC, 50/60 Hz,1ø. Includes: 2-channel digital readout, 500 lb. capacity S-type load cell, axial strain transducer with 2” range, platens and mounting hardware.See Triaxial and CBR sections of the catalog for the respective test accessories used with the Versa-LoaderTM.
UnconfinedCompressionTester,Hand OperatedASTM D-2166;
AASHTO T-208.
Lightweightdesign forlaboratory andfield use. Suppliedcomplete andready to operate.
The unconfined compression test is an important method of determining shear strength of cohesive and semi-cohesive soils.
Test loads are applied to the specimen through a hand crank. The rate of strain can be regulated during the test by turning the hand crank at the desired rate. Loads are indicated on a proving ring and dial indicator assembly.
Specifications
Specimen Height. Up to 8” (203 mm).
Platens. 3” (76 mm) diam.; with concentric grooves for centering specimen.
Proving Ring. Plated steel; complete with dial indicator and calibration charts in English and Metric units.
Strain Indicator. English: 1.0” range x 0.001” graduations.Metric: 25 mm range x 0.01 mm graduations.
Hand Crank. Two-piece; aluminum.
Base. One-piece; cast aluminum.
Crosshead. High-strength aluminum.
Dimensions. 10-5/8” w. x 6-3/8” d. x 26-1/4” h. (270 x 162 x 667 mm).
Weight. Net 43 lbs. (19.5 kg).; Shpg. 58 lbs. (26.3 kg).
Ordering InformationEI25-3604. 1,500 lb. load capacity.
EI25-3650. Unconfined Compression Platens and Dial Gauge assembly.
AutomaticSoilCompactorASTM D-558,D-559, D-560,D-698, D-1557;AASHTO T-99,T-134, T-135,
T-136, T-180.
Pre-set blowpatternensures evencompaction. Solid statecontrols forreliabilityand ease ofmaintenance. Automaticcounterreset aftercompletion of blow pattern.
The ELE Compactor automatically compacts soil specimens, eliminating the laborious hand compaction method. The height and weight of the hammer is adjustable to suit test requirements.
An automatic blow pattern ensures optimum compaction for each layer of soil. The hammer itself travels across the mold and the table rotates the mold in equal steps on a base that is extremely stable. The number of blows per layer can be set at the beginning of the test by means of the simple digital counter system.
Specifications
Hammer. Circular faced, 2.0” (50.8 mm) diam. foot; adjustable to either 5.5 lb.(2.5 kg) or 10 lb. (4.5 kg) weight.
Drop. Adjustable to either 12” (305 mm) or 18” (457 mm)
Controls. Digital counter system, selector switch for either standard proctor test or modified proctor/CBR testing.
Dimensions. 10” w. x 17” d. x 55” h. (250 x 430 x 1,400 mm).
Weight. Net 419 lbs. (190 kg).
Ordering InformationEI24-9095/02. 110-120vAC, 50/60 Hz, 1ø.
EI24-9095/01. 220-240vAC, 50/60 Hz, 1ø.Soil compactor Includes 4” and 6” compaction Molds.
AccessoriesEI24-9095/12. Calibration Kit.
Replacement PartsEI24-9095/13. Lead Cylinders for EI24-9095/12. Pack of 100.
EI24-9097. Standard Compaction Mold. 1/30 cu.ft.; 4” i.d. x 4.584” h.
EI24-9098. Modified Compaction Mold. 1/13.33 cu.ft.; 6” i.d. x 4.584” h.
Basic Laboratory Compaction Set,MotorizedASTM D-698, D-1557;AASHTO T-99, T-180.
Ordering InformationSet Includes:1 Automatic Soil Compactor (24-9095/0x).1 Standard Compaction Mold (24-9097).1 Modified Compaction Mold (24-9098).1 Straightedge (24-9010).1 Mixing Trowel (88-7400).1 Mixing Spoon (88-7700).1 Spatula (88-7500).1 Trimming Knife (88-7910).1 Sample Ejector (23-4085).3 Mixing Pans (88-7150 Mixing Pan).1 Doz. Moisture Cans (88-7022A).1 Wash Bottle (88-6612).
EI2310/02. 110-120vAC, 50/60 Hz, 1ø.
Basic Laboratory Compaction Set,Hand-OperatedASTM D-698, D-1557;AASHTO T-99, T-180.
Ordering InformationSet Includes:1 Standard Compaction Mold (24-9097).1 Modified Compaction Mold (24-9098).1 Standard Compaction Hammer (24-9063).1 Modified Compaction Hammer (24-9070).1 Straightedge (24-9010).1 Mixing Trowel (88-7400).1 Mixing Spoon (88-7700).1 Spatula (88-7500).1 Trimming Knife (88-7910).1 Sample Ejector (23-4085).3 Mixing Pan (88-7150).1 Doz. Moisture Cans (88-7022A).1 Wash Bottle (88-6612).
EI2300E.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
30
Soil Testing - Compaction
For quotations and product pricing go to www.eleusa.com
31
Soil Testing - Compaction
Standard Compaction HammerASTM D-558, D-559, D-560, D-698;AASHTO T-99, T-134, T-135, T-136.
Specifications
Hammer. 2” diam. (50.8 mm); 5-1/2 lbs. (2.49 kg).
Drop. 12” (305 mm).
Guide Sleeve. Machined steel tubing with integrally spun end cap; air pressure release holes.
Weight. Net 9 lbs. (4.1 kg).
Ordering InformationEI24-9063.
Modified Compaction HammerASTM D-1557;AASHTO T-180.
Specifications
Hammer. 2” diam. (50.8 mm); 10 lbs. (4.5 kg).
Drop. 18” (457 mm).
GuideSleeve.
Machined steel tubing with integrally spun end cap; air pressure release holes.
Weight. Net 14 lbs. (6.3 kg).
Ordering InformationEI24-9070.
Standard Compaction MoldASTM D-558, D-559, D-560, D-698, D-1557;AASHTO T-99, T-134, T-135, T-136, T-180.
The Standard Compaction Mold consists of the 1/30 cu. ft. cylinder mold, collar and base plate.
Specifications
Mold Volume. 1/30 cu. ft.
Dimensions. 4” i.d. x 4.584” h. (101.6 x 116.4 mm).
Base Plate. 6” x 6” x 1/2” thick (152 x 152 x 13 mm).
Weight. Net 12 lbs. (5.4 kg).
Ordering InformationEI24-9097.
Split Compaction MoldASTM D-558, D-559, D-560, D-698, D-1557;
AASHTO T-99, T-134, T-135, T-136, T-180.
The Split Compaction Mold is similar in all details to model EI24-9061, except that it is split longitudinally with special clamps.
Specifications
Mold Volume. 1/30 cu. ft.
Mold Dimensions. 4” i.d. x 4.584” h. (101.6 x 116.4 mm).
Base Plate. 6” x 6” x 1/2” thick (152 x 152 x 13 mm).
Weight. Net 13 lbs. (5.9 kg).
Ordering InformationEI24-9062.
Modified Compaction MoldASTM D-698, D-1557;AASHTO T-99, T-180.
The Modified Compaction Mold is used in performing the ASTM test for Moisture-Density Relations of Soils.
Specifications
Mold Volume. 1/13.33 cu. ft.
Mold Dimensions. 6” i.d. x 4.584” h. (152.4 x 116.4 mm).
Base Plate. 8” x 8” (203 x 203 mm).
Weight. Net 18 lbs. (8.2 kg).
Ordering InformationEI24-9098.
StraightedgeASTM D-698, D-1557;AASHTO T-99.
The Straightedge is used for trimming a compacted specimen level with the top of the mold.
Specifications
Construction. Flat ground tool steel; beveled edge.beveled edge. edge.
Dimensions. 12” l. x 1-1/4” w. x 1/8” thick (305 x 32 x 3 mm).
Weight. Net 9 oz. (255 g).
Ordering InformationEI24-9010.
Sample Ejector
Fast sample extrusion from molds and sampling tubesup to 7” (178 mm) long.6,000 lbf. (26.7 kN) hand-operated hydraulic jack. Bench top design for use in both the laboratory andthe field. All metal construction treated for rust resistance andlong life.
Fast extrusion and ejection of soil samples from molds and short lengths of sample tubing are accomplished by the ELE Sample Ejector. Designed in a heavy duty bench style, the ejector has a pushing force of 6,000 lbf. (26.7 kN) which is developed through a hand operated hydraulic jack.
The unit is supplied complete with accessories for ejecting samples from 2” (50.8 mm) and 3” (76.2 mm) shelby tubes, 4” (101.6 mm) or 6” (152.4 mm) molds, up to 7” (178 mm) long.
Specifications
Capacity. 2” (50.8 mm) and 3” (76.2 mm) shelby tubes up to 7” l. (178 mm);4” (101.6 mm) and 6” (152.4 mm) molds.
PushingForce.
6,000 lbf. (26.7 kN).
Jack. Hydraulic; hand-operated; 7” (178 mm) stroke.
Construction. All metal; plated extrusion on housing and pump.
Dimensions. 10-1/2” w. x 8” d. x 22-1/2” h. (267 x 203 x 571 mm).
Weight. Net 64 lbs. (29 kg); Shpg. 75 lbs. (34 kg).
Ordering InformationEI23-4085.
AccessoriesEI23-4085/10. Ejector Head and Plate for 2.416” i.d. tubes.
Versa-LoaderTM
ASTM D-1883;AASHTO T-193.
10,000 lbf. (45 kN) maximum load
Accurate loading speeds from 0.08” 0.001” (0.025mm) per minute.
Push-button Up-Down-Stop operation switchprotection.
Highly versatile — can be used for Quick UndrainedTriaxial, Unconfined Compression and CBR testingwith proper
Please refer to page 11 for complete specifications on the Versa-LoaderTM series load frame.
Ordering InformationShown with CBR test digital readout set; not included, order separately.
EI25-3525/02. 110vAC, 50/60 Hz, 1ø.
AccessoriesEI24-9175. CBR Test Accessory Set English, includes lower platen, penetration piston assembly, dial indicator with 1.0” range 10,000 lb capacity proving ring and mounting hardware.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
32
Soil Testing - CBR
For quotations and product pricing go to www.eleusa.com
33
Soil Testing - CBR
CBR-Test 50 MachineAASHTO T-99, T-134, T-135, T-136, T-180.
Two speed machine (ASTM/AASHTO and BS).Rapid Platen Adjustment.Complete with penetration piston stabilizer bar.Compact, bench-top design.
Designed for performing laboratory CBR tests to ASTM, AASHTO and BS standards, the ELE CBR-Test 50 consists of a twin column frame and a motorized drive system. Two speeds are provided: 0.5” (1.27 mm) per minute for ASTM and AASHTO tests and 1.0 mm per minute for BS test applications.
Specifications
Capacity. 11,200 lbf. (50 kN).
Horizontal Clearance. 10” (255 mm).
Vertical Clearance. 31.5” (800 mm) maximum.
Platen. 5.24” (133 mm) diam.
Platen Travel. 4.13” (105 mm).
Dimensions. 15.75” w. x 21.65” d. x 48” h. (400 x 550x 1,220 mm).
Weight. Net 106 lbs. (48 kg).
Ordering InformationShown with proving ring, penetration piston assembly and penetration dial indicator; not included, order separately.
EI24-9150/02. 110-120vAC, 50/60 Hz, 1ø.
AccessoriesEI24-9179. CBR penetration piston assembly; for use on CBR-test.
EI78-0760. Proving Ring. 6,000 lb. (28 kN) capacity.
EI78-0860. Proving Ring. 11,200 lb. (50 kN) capacity.
EI88-4100. Penetration Dial Indicator. 1.0” range x 0.001” divisions.
EI88-4110. Penetration Dial Indicator. 25 mm range x 0.01 mm divisions.
EI88-4194. Dial Indicator Holder.See Data Acquisition section for electronic load and penetration measurement options.
CBR Loading Press, Hand Operated
Twin-column frame construction.10,115 lb. (45 kN) capacity loading jack.Stabilizer bar supplied as standard.
The CBR Loading Press is used to force the penetration piston into the compacted CBR specimen. The load is applied through a mechanical type jack.
Specifications
Jack. Mechanical; with quick release device for rapid adjustments.
Frame. Heavy-duty steel construction with two column uprights.
Dimensions. 14.5” w. x 10.25” d. x 46” h. (368 x 260 x 1,168 mm).
Weight. Net 145 lbs, (65.7 kg).
Ordering InformationShown with proving ring, penetration dial indicator and mold; not included, order separately.
EI24-9345.
AccessoriesEI78-0760. Proving Ring. 6,000 lb. (28 kN) capacity.
EI78-0860. Proving Ring. 11,200 lb. (50 kN) capacity.
EI88-4100. Penetration Dial Indicator. 1.0” range x 0.001” divisions.
EI88-4110. Penetration Dial Indicator. 25 mm range x 0.01 mm divisions.
Filter PaperASTM D-1883;AASHTO T-193.
Specifications
Grade. Coarse.
Size. 15 cm diam. (5.9”).
Weight. Net 8 oz. (227 g).
Ordering InformationEI24-9250. Box of 100.
Filter Screen
The Filter Screen is used by some laboratories as an alternative to our standard Filter Paper. The screen consists of a number 100 brass mesh cut to 5-15/16” (135 mm) in diameter.
Specifications
Mesh. Brass; number 100.
Size. 5-15/16” diam. (135 mm).
Weight. Net 1 oz. (28 g).
Ordering InformationEI24-9240.
Spacer Discs
Specifications
Construction. Steel; machined on all sides.
Finish. Plated.
Weights. EI24-9237: Net 15 lbs. (6.8 kg).EI24-9238: Net 16 lbs. (7.3 kg).
Ordering InformationEI24-9237. 5-7/8” diam. x 2” h. (47.6 x 50.8 mm).EI24-9238. 5-15/16” diam. x 2.416” h. (150.8 x 61.3 mm).
Surcharge Weights
Specifications
Construction. Machined steel.
Finish. Plated.
Ordering InformationEI24-9244. 5 lb. (2.27 kg) Slotted. 5-7/8” o.d. x 2-1/16” slot (149.2 x 52.4 mm).EI24-9245. 5 lb. (2.27 kg) Circular. 5-7/8” o.d. x 2-1/16” slot (149.2 x 52.4 mm).EI24-9246. 10 lb. (4.54 kg) Slotted. 8-1/2” o.d. (216 mm).EI24-9247. 10 lb. (4.54 kg) Circular. 10” o.d. (254 mm).EI24-9248. 20 lb. (9.07 kg) Slotted. 8-1/2” o.d. (216 mm).
Laboratory CBR, Hand-Operated
The hand-operated Laboratory CBR consists of a basic selection of items to perform CBR testing, where electrical power is not available.
Ordering InformationEI24-9345. CBR Loading Press x 1
EI78-0860. Proving Ring, 11,200 lb. x 1
EI88-4100. Penetration Dial Indicator x 1
EI24-9229. CBR Molds x 4
EI24-9238. Spacer Disc x 1
EI24-9240. Filter Screens x 4
EI24-9250. Box, Filter Paper x 1
EI24-9260. Swell Plates x 2
EI24-9262. Tripod Attachment x 1
EI88-4100. Dial Indicator x 1
EI24-9245. Surcharge Weights x 4
EI24-9244. Slotted Surcharge Weights x 4
EI24-9063. Compaction Hammer x 1
EI24-9010. Straightedge x 1
EI24-9236. Cutting Edge x 1
Field CBRASTM D-4429.
The Field CBR consists of the equipment required to perform CBR testing in accordance with ASTM and AASHTO specifications.
Ordering InformationEI24-9290. Field CBR Jack x 1
EI24-9300. Ball Seating Attachment x 1
EI78-0460. Proving Ring, 2,250 lb. (10 kN) cap. x 1
EI78-0760. Proving Ring, 6,000 lb. (28 kN) cap. x 1
EI24-9183. Field Penetration Piston x 1
EI24-9308. Extension Rod x 1
EI24-9188. Bracket and Adapter x 1
EI24-9312. Bridge Support x 1
EI88-4100 or 88-4110. Penetration Dial Indicator x 1
EI24-9247. Circular 10 lb. (4.54 kg) Surcharge Weight x 1
EI24-9246. Slotted 10 lb. (4.54 kg) Surcharge Weight x 1
EI24-9248. Slotted 20 lb. (9.07 kg) Surcharge Weight x 1
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
34
Soil Testing - CBR
For quotations and product pricing go to www.eleusa.com
35
Soil Testing - Density
CBR MoldASTM D-1883;AASHTO T-193.
Specifications
Mold 6” i.d. x 7” h. (152.4 x 177.8 mm).
Collar. 2” h. (50.8 mm); fits both ends of mold.
Base Plate. Perforated; fits both ends of mold.
Construction. A All steel; plated.
Weight. Net 20 lbs. (9 kg).
Ordering InformationEI24-9229.
Cutting Edge
Machined from seamless steel tubing, the Cutting Edge has an inside diameter of 6” (152.4 mm) and is approximately 1-1/2” (38 mm) high. A recess in the upper section makes it possible to mount the Cutting Edge at either end of the CBR Mold to facilitate the taking of undisturbed samples in the field.
Specifications
Dimensions. 6” i.d. x 1-1/2” h. (152.4 x 38 mm).
Construction. Machined seamless steel tubing; recessed for mounting on CBR Mold.
Finish. Plated.
Weight. Net 1-1/2 lbs. (0.7 kg).
Ordering InformationEI24-9236.
Swell PlateASTM D-1883;AASHTO T-193.
Specifications
Base Plate. 5-7/8” diam. (149.2 mm); perforated.
Contact Head. Adjustable; locks on stem with knurled nut.
Construction. All brass.
Weight. Net 2-1/2 lbs. (1.1 kg).
Ordering InformationEI24-9260.
Tripod AttachmentASTM D-1883;AASHTO T-193.
Specifications
Construction. Machined, one-piece cast aluminum.
Clamp. Integral part of assembly; holds dial indicator.
Extension Point. 2” l. (50.8 mm) included.
Weight. Net 1 lb. (0.4 kg).
Ordering InformationRequires dial indicator; not included, order separately.EI24-9262.
AccessoriesEI88-4100. Dial Indicator. 1.0” range x 0.001” divisions.
EI88-4110. Dial Indicator. 25 mm range x 0.01 mm divisions.
ASTM D-4253,
D-4254.
OrderingInformationSet Includes:1 Vibrating Table
(24-9112/0x).1 0.1 cu. ft. Relative
Density Mold Set (24-9114).
1 0.5 cu. ft. Relative Density Mold Set (24-9116).
1 Relative Density Gauge Set (24-9118).
EI2500/06. 220vAC, 60Hz, 1ø.
EI2500/01. 220vAC, 50Hz, 1ø.
Vibrating TablesASTM D-4253, D-4254.
Cushioned steel vibrating deck. Semi-noiseless electromagnetic vibrator. 3600 vpm operating frequency. Separate controller to vary vibrator amplitude.
Specifications
Table. Steel construction; 30” x 30” (762 x 762 mm) cushioned steel deck.
Actuator. Electromagnetic vibrator; semi-noiseless;over 100 lb. (45.3 kg) net wt.
Frequency. 3,600 vpm; variable amplitude separately controlled.
Table Capacity. 750 lbs. (340 kg).
DoubleAmplitudeRange.
EI24-9112/06: 0.002” to 0.015” (0.05 to 0.38 mm). EI24-9112/01: 0.002” to 0.019” (0.05 to 0.48 mm).
Dimensions. 30” w. x 30” d. x 21” h. (762 x 762 x 533 mm).
Weight. Net 555 lbs. (252 kg); Shpg. 605 lbs. (274 kg).
Ordering InformationEI24-9112/06. 220vAC, 60Hz, 1ø.
EI24-9112/01. 220vAC, 50Hz, 1ø.
0.1 Cu. Ft. Relative Density Mold SetASTM D-4253, D-4254.
Lightweight aluminum mold construction withcarrying handles.Detachable guide sleeve assembly.Includes surcharge weight and base plate assembly.
Specifications
Mold. Aluminum; 0.1 cu. ft. (2,830 cu. cm);6” i.d. x 6.112” inside ht. x 3/8” thick walls(152.4 x 155.2 x 9.5 mm); with handles and mounting brackets for dial indicator.
Guide Sleeve. For surcharge weight; removable; with clamp assembly.
SurchargeWeight.
56.5 lbs. (25 kg) including surcharge base plate; 5-15/16” diam. x 9” h. (150.8 x 228.6 mm); with handle.
SurchargeBase Plate.
5-15/16” diam. x 1/2” thick (150.8 x 2.7 mm);with alignment pins and removable handle.
Weight. Net 90 lbs. (41 kg).
Ordering InformationEI24-9114.
0.5 Cu. Ft. Relative Density Mold SetASTM D-4253, D-4254.
Lightweight aluminum mold construction withcarrying handles.Detachable guide sleeve assembly.Includes surcharge weight and base plate assembly.
Specifications
Mold. Aluminum; 0.5 cu. ft. (14,200 cu. cm); 11” i.d. x 9.092” inside ht. by 3/8” thick walls (279.4 x 230.9 x 9.5 mm); with handles and mounting brackets for dial indicator.
GuideSleeve.
For surcharge weight; removable; with clamp assembly.
SurchargeWeight.
190 lbs. (86.2 kg) including surcharge base plate;10-7/8” diam. x 6” h.(276.2 x 152.4 mm); with handle.
SurchargeBase Plate.
10-7/8” diam. x 1/2” thick (276.2 x 12.7 mm);with alignment pins and removable handle.
Weight. Net 245 lbs. (111 kg).
Ordering InformationEI24-9116.
Relative Density Gauge SetASTM D-4253, D-4254.
Includes plated metal calibration bar. Can be used on both 0.1 cu. ft. and 0.5 cu. ft.Relative Density Mold Sets.
Specifications
Dial Indicator. 2.0” range x 0.001” divisions.
Dial Holder. Machined steel; plated.
Calibration Bar. Plated steel; 3” w. x 12” l. x 1/8” thick (76 x 305 x 3.2 mm).
Weight. Net 7 lbs. (3.2 kg).
Ordering InformationEI24-9118. Includes Dial Indicator Holder and Calibration Bar.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
36
Soil Testing - Density
For quotations and product pricing go to www.eleusa.com
37
Soil Testing - Density
Volumeasure®
ASTM D-2167;AASHTO T-205.
Protective aluminum guard with carrying handle forconvenience at the job site. Dual-scale cylinders, graduated in both English andMetric units.1/20 cu. ft. (1,596 ml) capacity.
The Volumeasure® is a direct reading instrument used to determine the in-place density of compacted or firmly bonded soils and construction fill materials. Incorporating the liquid filled balloon principle, the Volumeasure® consists of a graduated cylinder, aluminum guard, base, pressure-vacuum actuator bulb, rubber balloons and a field density plate.
Ordering InformationEI29-4522. 1/20 cu. ft. (1,596 ml) capacity.
AccessoriesEI29-4524. Volumeasure® Pressure Gauge. For use in controlling the applied pressure during calibration and testing in accordance with ASTM and AASHTO standards.
Replacement PartsEI29-4522/10. Balloons. Pkg. of 12.
EI29-4522/11. Graduated Cylinder and Gasket Set. 1/20 cu. ft. (1,596 ml) capacity.
EI29-4522/13. Actuator Bulb Assembly.
Sand Density Cone, 12” (305 mm)
Can be used to determine the in-place density ofgravel and coarse-grained soils. Clear plastic top for easy visibility of sand level. Convenient jar handles for carrying apparatus tothe field.
With the 12” (305 mm) Sand Density Cone, it is possible to use the sand method to determine the in-place density of gravel and coarse-grained soils. The flange which fits on the lower cone permits use of the apparatus on holes up to 12”(305 mm) in diameter. Joining the upper and lower cones is a special valve assembly. The metal jar has carrying handles and a clear plastic top. The unit follows U.S. Army Corps of Engineers specifications.
Specifications
Lower Cone. Flanged; 12” (305 mm) opening.
Sand Jar. Metal; clear plastic top; with handles.
Finish. Painted.
Weight. Net 42 lbs. (19 kg).
Ordering InformationEI29-4350. Includes circular base plate.
AccessoriesEI29-4355. Density Sand. 50 lb. (22.7 kg) bag.
Specification see page 37.
Sand Density ConesASTM D-1556;AASHTO T-191.
Corrosion-resistant brass valve assembly. Spun metal upper and lower cones. Durable plastic sand jug reduces the chance ofpossible breakage in the field.
The Sand Density Cone provides a practical method of determining the in-place density of soil and related materials in base coarses, roadways, dams, embankments, levees and similar construction. The equipment consists of a double cone assembly and a one gallon (4,000 cu. cm) capacity sand jug.
Specifications
Top Cone. Threads into sand jug.
Bottom Cone. EI29-4292: Flanged to 4-1/2” (114 mm) diam.EI29-4302: Flanged to 6-1/2” (165 mm) diam.
Valve. Brass construction; controls sand flow into density hole.
Sand Jug. Plastic; 1 gal. (4,000 cu. cm) capacity.
Weight. EI29-4292: Net 2 lbs. (0.9 kg).EI29-4302: Net 3 lbs. (1.4 kg).
Ordering InformationShown with field density plate; not included, order separately.
EI29-4292. 4” (102 mm) Sand Density Cone.
EI29-4302. 6” (152 mm) Sand Density Cone method.
Replacement PartsEI29-4292/10. Plastic Sand Jug.
Field Density PlatesASTM D-1556;AASHTO T-191.
Used in conjunction with the Sand Density Cone, the Field Density Plate facilitates the removal of soil from the density hole. In preparing the density hole, the center opening of the plate can be used as a template to control the diameter of the hole. The plate itself is used as a shelf to prevent the loss of soil during the removal operation.
Ordering InformationEI29-4294. 4” For use with EI29-4292 Sand Density Cone.
EI29-4342. 6” For use with EI29-4302 Sand Density Cone.
Density SandASTM D-1556;AASHTO T-191.
Specifications
Density. Approx. 93 lbs./cu. ft. (1.49 g/cu. cm).
Particle Size. Maximum size less than 2 mm (no. 10 sieve), and less than 3% by weight passing 250 µm (no. 60 sieve).
Weight. Net 50 lbs. (22.7 kg).
Ordering InformationEI29-4355.
6” (152 mm) Sand Cone Density MethodASTM D-1556;AASHTO T-191.
Equipment necessary to perform density testing in the field, using the Sand Cone method.
Ordering InformationEI29-4302. Sand Density Cone x 1
EI29-4292/10. Replacement Sand Jug x 1
EI29-4342. Field Density Plate x 1
EI29-4355. Bags, Density Sand x 2
EI88-7700. Spoon x 1
EI88-7960. Steel Chisel x 1
EI88-7940. Rubber Mallet x 1
EI88-7300. Scoop x 1
EI88-7042. 2 Field Cans x 1
EI88-1600 or 88-1610. Field Scale x 1Drying oven required for density testing; not included, order separately.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
38
Soil Testing - Density
For quotations and product pricing go to www.eleusa.com
39
Soil Testing - Density
Portable Dynamic Cone Penetrometer/Auger Set
Handle and extensions of auger are lightweighttubing for portability. Steel constructed auger bucket and blades forabrasion resistance. 4” (102 mm) hole diameter hand auger head for easydropping of cuttings. Depth of 20’ (6.1 m) possible with 36” (914 mm)auger extensions. Quick connect couplings. Sliding drive hammer consists of 15 pound hammerdesigned for 20” (508 mm) free fall. Cone penetrometer point is attached to a 12” (305 mm)long rod. Four 30” (762 mm) E drill rods for extension betweencone and sliding drive hammer.ASTM Special Technical Publication #399 included.
The Portable Dynamic Penetrometer Set is designed to perform penetration testing for evaluation of soil consistency and density. It is ideal for field exploration and for verifying individual footing foundations during construction. The set comprises a hand auger assembly for advancing holes and the dynamic cone penetrometer for shallow in-situ testing.
The auger features a blade diameter of 4” (102 mm) which exceeds the bucket diameter of 3-1/4” (82.6 mm), easily allowing auger cuttings to shake free of the bucket. Both the bucket and blades are constructed of steel for abrasion resistance. Lightweight tubing for the cross handle and extensions to hand auger, up to 20’ (508 mm), make the auger assembly easy to carry.
Specifications
Auger Head. 3-1/4” (82.6 mm) bucket diam. 4” (102 mm) blade diam.
Tee Handle. 3/4” (19 mm) diam. rod; 36” (914 mm) long.
Extensions. Four 36” (914 mm) hand auger extensions.
Slide Hammer. 15 lb. circular disc with 20” (508 mm) free fall.
HammerExtensions.
Four 30” (762 mm) E Drill rods.
PenetrometerCone.
30°.
Weight. Net 78 lbs. (35.4 kg).
Ordering InformationModel EI29-5500 Portable Dynamic Cone/Auger Set Shown.
EI29-5500. Portable Dynamic Cone Penetrometer/Auger Set.
EI29-5505. Portable Dynamic Cone Penetrometer. Consists of sliding drive hammer assembly, cone penetrometer point attached to a 12” (305 mm) rod, four 30” (762 mm) “E” drill rod extensions.
AccessoriesEI29-5510. 3” (76.2 mm) Drive Tube Assembly. Consists of a drive head, 3” (76.2 mm) diam. x 10” (254 mm) long sample tube and plastic end cap.
EI29-5510/10. Sample Tube. 3” (76.2 mm) diam. x 10” (254 mm) long.
EI29-5510/11. Plastic End Cap. For 3” Sample Tube.
Replacement PartsEI29-5500/10. Sliding Drive Hammer Assembly.
EI29-5500/11. Cone Penetrometer Point with 12” (305 mm) rod.
EI29-5500/12. 30” (762 mm) long “E” Drill Rod Extensions.
EI23-1400/10. 3-1/4” ELE Auger Head with Connector Pin.
EI23-1400/11. Tee Handle with Connector Pin.
EI23-1400/12. Auger Extension with Connector Pin. 36”. (914 mm) long.
EI23-1400/13. Connector Pin.
EI29-5510. Drive Tube Assembly.
Density Drive SamplersASTM D-2937.
Designed to determine in-place density of soil, the Density Drive Sampler and Tubes are used to obtain a relatively undisturbed soil sample. The sampler consists of a rod, handle and anvil hammer with a shock spring to drive the thin-walled tube into the soil.
Specifications
Drive Head. EI29-5450: 3” (76.2 mm) diam.EI29-5455: 4” (101.6 mm) diam.
HammerAssembly.
Plated steel construction with internal shock spring.
TubeDimensions.
EI29-5450/10: 3” (76.2 mm) diam. x 2.75” (69.8 mm) l.EI29-5455/10: 4” (101.6 mm) diam. x 5” (127 mm) l.
Weights. EI29-5450: Net 22 lbs. (9.9 kg).EI29-5455: Net 23 lbs. (10.4 kg).
Density Tubes are not included with Drive Samplers; order separately.
Ordering InformationEI29-5450. Density Drive Sampler. With 3” (76.2 mm) drive head.
EI29-5455. Density Drive Sampler. With 4” (101.6 mm)drive head.
AccessoriesEI29-5450/10. Density Tube. 3” (76.2 mm). 0.01 cu. ft capacity.
EI29-5455/10. Density Tube. 4” (101.6 mm). 0.033 cu. ft capacity.
Probe Rod
Locates soft zones of soil in compacted areas.Easy to use.Lightweight.Durable.
Designed for on-site conditions, the Probe Rod meets the need for a simple device to locate soft zones of soil in and under compacted areas in sub-grades or footing excavations.
The T-shaped design and conical tip make this hand tool easy to use. It is lightweight for convenient transport and plated for durability.
Specifications
Handle. 8” (203 mm).
Probe Shaft. 36” (914 mm).
Diameter. 1/2” (12.7 mm).
Weight. Net: 3 lb. (1.36 kg).
Ordering InformationEI29-5460.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
40
Soil Testing - Moisture
For quotations and product pricing go to www.eleusa.com
41
Soil Testing - Grain Size Analysis
Rapid Moisture TestersASTM D-4944; AASHTO T-217.
Reliable and accurate moisture measurement in thefield.Direct-reading in percent moisture.Rapid results in minutes.Easy-to-use — includes simple step-by-stepinstructions.Electronic balance included as standard.
The rapid moisture testing kit’s available from ELE-Soiltest includes two models, both containing all items required and an electronic balance for weighing samples all included in heavy-duty case.
The durable case offers the highest level of protection. A foam insert secures the contents of the kit.
The SpeedyTM moisture tester determines the moisture content of a broad range of materials. A small sample of the material to be tested is weighed on the balance and then placed in the hand held vessel. A measure of calcium carbide reagent is then added and the vessel sealed. The reagent reacts with the free moisture in the sample to produce acetylene gas, resulting in an increase in pressure within the vessel.
Ordering InformationMoisture Tester Reagent is required for operation; not included, order separately.
EI23-7452. SpeedyTM Moisture Tester with Carrying Case and Electronic Balance. 20 g capacity; 0 - 20% Range.
Replacement PartsEI23-7452/12. Portable Electronic Balance 0-200 gram.
EI23-7702. SpeedyTM Moisture Tester Reagent. Carton of 12, 500 g cans. Meets ASTM D-4944 and AASHTO T-217specifications.
AccessoriesEI23-7600. SpeedyTM Calibration Kit. Includes master gauge, valves, integral air pump, tools, instruction manual and case.
The Rapid moisture tester provides fast and reliable moisture determination in construction materials and other compounds.
No need for time consuming laboratory tests thanks to the precise measuring system. The indicated reading on the pressure gauge corresponds to the actual residual moisture in CM% – no conversions necessary.
Calcium carbide reagent for the Rapid tester is supplied sealed in glass ampoules weighing 8 grams. For testing samples weighing 20 gram, three ampoules are required.
Similar to the SpeedyTM tester a sample of material is added together with the steel balls and the required number of ampoules added and the vessel sealed. Shaking the vessel breaks down the glass releasing the Calcium Carbide which then reacts with the free moisture in the sample to produce acetylene gas, resulting in an increase in pressure within the vessel. The % moisture content of the sample is then read directly from the calibrated pressure gauge.
Check calibration of the Rapid tester is straightforward using a sealed glass ampoule containing a standard amount of water (three supplied with each unit) which is added to the vessel, broken down by the steel balls and the resulting moisture is read on the gauge.
Ordering InformationMoisture Tester Reagent is required for operation; not included, order separately.
EI23-7550. Rapid Moisture Tester with Carrying Case and Electronic Balance. 20 g capacity; 0 - 20% Range.
Replacement PartsEI23-7550/10. Portable electronic balance 0-200g.
EI23-7550/11. Rapid Moisture Tester Reagent. Glass ampoules pack of 25.
EI23-7550/12. Rapid Moisture Tester Reagent. Glass ampoules pack of 100.
Hydrometer Jar BathASTM D-422;AASHTO T-88.
Automatic high temperature safety cut-off.Stainless steel interior and shelf for rust resistance andlong life.Removable shelf for easy clean-up.
Accurate hydrometer analysis of a soil specimen requires maintaining the sample in suspension at a constant temperature. The Hydrometer Jar Bath maintains the sample at 20°C ±0.2° (68°F) by circulating water around the hydrometer jars.
Specifications
Capacity. 8 hydrometer jars.
Construction. Stainless steel tank; enamel finish exterior.
Jar Support. Stainless steel grid.
TemperatureRange.
Ambient to 60°C (140°F).
Sensitivity. ±0.2°C at 20°C (68°F).
CirculatingSystem.
Drive pump with motor.
HeatingSystem.
Immersion type; 700 watt heater in stainless steelmixing chamber.
PlumbingPorts.
Overflow; Drain; Inflow and outflow for cooling system.
InsideDimensions.
25-3/4” w x 8” d x 16-1/2” h (654 x 203 x 419 mm)
OutsideDimensions.
34” w x 11” d x 29” h (837 x 279 x 737mm)
Weight. Net 80 lbs. (36 kg).
Ordering InformationEI24-4867/02. 110vAC, 50/60 Hz, 1ø.
EI24-4867/01. 220vAC, 50/60 Hz, 1ø.
Mechanical Analysis StirrerASTM D-422;AASHTO T-88.
Powerful 3-speed universal motor.Stainless steel front panel.Includes Mixing Paddle and Dispersion Cup.
This compact, bench-top stirrer is used for dispensing soil samples in water for hydrometer analysis in accordance with ASTM and AASHTO standards.
Specifications
Motor. Universal AC-DC; up to 75 cycles; 3-speed selectable.
Speeds at NoLoad.
Low: 13,000 rpm.Medium: 16,000 rpm.High: 18,000 rpm.
Housing. Die-cast aluminum; stainless steel front panel;baked enamel finish.
Controls. Rotary speed control switch; on-off switch.
MixingPaddle.
Disc-shaped; nickel-plated steel.
DispersionCup.
4 stationary baffles, permanently mounted; rounded bottom.
Dimensions. 7” w. x 6-1/2” d. x 20” h. (178 x 165 x 508 mm).
Weight. Net 15 lbs. (7 kg).
Ordering InformationIncludes Mixing Paddle and Dispersion Cup.
EI24-4132/02. 120vAC, 50/60 Hz, 1ø. 125 Watts.
EI24-4132/01. 220-240vAC, 50/60 Hz, 1ø. 125 Watts.
Replacement PartsEI24-4132/10. Soil Dispersion Cup. Capacity 32 oz. Net Wt. 1 lb. (454 g).
EI24-4132/11. Mixing Paddle. Net Wt. 1 oz. (28 g).
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
42
Soil Testing - Grain Size Analysis
For quotations and product pricing go to www.eleusa.com
43
Soil Testing - Grain Size Analysis
ASTM Soil HydrometersASTM D-422, E-100;AASHTO T-88.
The series Hydrometer gives consistently accurate readings and eliminates the error due to variable dilution. Molded, seamless construction ensures uniformity of volumetric displacement. With no variations between instruments, these hydrometers never need recalibration.
Specifications
Construction. Molded, seamless.
Scale. Bouyoucos; double scale.
Calibration. At 68°F.
Weight. Net 4 oz. (113 g).
Ordering InformationEI24-4640. -5 to 60 g colloids/liter. ASTM/AASHTO scale 152H.
EI24-4650. 0.995 to 1.038 specific gravity x 0.001 divisions ASTM/AASHTO scale 151H.
Sodium HexametaphosphateASTM D-422, E-100;AASHTO T-88.
Extensive laboratory research has shown that Sodium Hexametaphosphate is the most effective dispersing agent available. The compound is supplied in 1 lb. (0.45 kg) containers.
Ordering InformationEI24-4145. *Shelf Life 18 months
Replacement Parts4699-0881. Solid Rubber Stopper
Particle Size Analysis Test SetASTM D-422;AASHTO T-88.
The Particle Size Analysis Test Set is a basic set of equipment necessary to perform particle size analysis on soils.
Ordering InformationSet includes:1 Mechanical Analysis Stirrer (24-4132/02).1 Sodium Hexametaphosphate, 1 lb (24-4145).1 Hydrometer ASTM 152H (24-4640).1 Hydrometer ASTM 151H (24-4650).2 Hydrometer Jar, 1000ml (24-4700).1 Hydrometer Jar Bath (24-4867/02).1 8” Brass Sieve #4 Mesh (79-5020).1 8” Brass Sieve #10 Mesh (79-5070).1 8” Brass Sieve #20 Mesh (79-5120).1 8” Brass Sieve #40 Mesh (79-5160).1 8” Brass Sieve #60 Mesh (79-5190).1 8” Brass Sieve #140 Mesh (79-5240).1 8” Brass Sieve #200 Mesh (79-5260).1 8” Brass Cover Less Ring (79-5400).1 8” Brass Pan (79-5410).1 8” Brass Sieve 3/8 Mesh (79-5510).1 8” Brass Sieve 3/4 Mesh (79-5560).1 8” Brass Sieve 1 1/2” Mesh (79-5610).1 8” Brass Sieve 2” Mesh (79-5630).1 8” Brass Sieve 3” Mesh (79-5660).1 Sieve Brush (79-7220).1 Fine Sieve Brush (79-7225).1 Wire Sieve Brush (79-7230).1 Graduated Cylinder, 1000 ml (88-6012).1 Beaker, Glass 600 ml (88-6110).1 Evaporating Dish, 1285ml (88-6718).
EI2824/02. 110vAC, 50/60Hz, 1ø.
Hydrometer JarASTM D-422;AASHTO T-88.
Heavy beaded finish at top rim.
Calibrated to 1,000 ml at 20°C.
Designed in accordance with ASTM and AASHTO specifications, the jar has a heavy beaded finish on the top.
Specifications
Construction. Glass.
Graduation. 1,000 ml at 20°C.
Dimensions. 2-1/2” o.d. x 18” h. (64 x 457 mm);4-1/4” diam. (108 mm) base.
Weight. Net 1-1/2 lbs. (0.7 kg).
Ordering InformationEI24-4700. Hydrometer jar, 1000ml.
Replacement parts4699-0881. Solid Rubber Stopper
Sand Equivalent Test SetASTM D-2419;AASHTO T-176.
Meets ASTM and AASHTO specifications.Metal components plated for long life.Includes lightweight plastic carrying case.
The Sand Equivalent Test Set is designed to determine the relative proportion of detrimental fine dust or clay-like material in soils or fine aggregates. Widely used by highway and road laboratories, the test can easily be conducted in both the laboratory and in the field.
Specifications
StockSolution.
Mixture of calcium chloride and glycerin.
CarryingCase.
Plastic; holds all components.
Weight. Net 17 lbs. (7.7 kg).
Set Includes:
1 Solid Rubber Stopper.1 2-Hole Rubber Stopper.1 Pinch Clamp.1 Carrying Case.1 Weighted Foot Assembly.1 Funnel.1 Irrigation Tube.1 Siphon Tube.1 Blow Hose.1 Measuring Can 85ml +/- 5ml.1 Bottle Stock Solution.4 Sand Equivalent Cylinders.
EI24-4917.
Replacement PartsEI24-4917/10. Sand Equivalent Cylinder. Clear plastic; 1-1/4” diam. x 17” h. (32 x 432 mm); graduated to 15” x 0.1” (381 x 2.54 mm).
EI24-4936. Stock Solution. 8 oz. bottle.
EI24-4938. Stock Solution. 1 gallon container.
Sand Equivalent ShakerASTM D-2419;AASHTO T-176; CA-217, CA-229.
Solid state timer with 45 second, 10 minute andcontinuous run cycles.No belts to slip or replace.Eliminates errors found in hand shaking methods.Can be used in Durability Index Test applications.
The Sand Equivalent Shaker is designed to eliminate errors in manual shaking for sand equivalent tests. The unit provides a consistent and repeatable oscillation, eliminating variations from one operator to the next. The shaker can also be used for the Durability Index Test.
Specifications
Motor. 1.9 Amp synchronized; 1/12 hp.
CylinderHolder.
Spring-loaded.
ShakingMechanism.
8” (203 mm) stroke; 175 strokes/minute (+/- 2strokes).
TimingCircuit.
Built-in; 45 seconds, 10 minute and continuous run.
Dimensions. 19.5” w. x 14” d. x 17” h. (495 x 356 x 432 mm) with holder.
Weight. Net 50 lbs. (23 kg).
Ordering InformationEI24-4949/02. 110vAC, 50/60 Hz, 1ø.
AccessoriesEI24-4917/10. Sand Equivalent Cylinder.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
44
Soil Testing - Liquid Limit
For quotations and product pricing go to www.eleusa.com
45
Soil Testing - Liquid Limit
Motorized Liquid Limit DeviceASTM D-4318;AASHTO T-89.
Motorized for greater uniformity of test procedure.Mechanical counter automatically records number ofcup drops.Includes ten precision molded Plastic ASTM GroovingTools.Optional Grooving Tool available for testing toAASHTO standards.
The Motorized Liquid Limit Device eliminates many human variables in classification testing. It allows the operator to more closely duplicate test results on the same soil.
The unit incorporates a totally enclosed gear motor system which drives the liquid limit device and mechanical counter assembly.
Supplied complete with ASTM Grooving Tools, the Motorized Liquid Limit Device is ideal for use in any soils laboratory.
Specifications
Counter. Mechanical; records number of cup drops.
Cup. Spun brass; pin and slot mounting.
Base. Molded hard rubber.
Cam. Molded, self-lubricating plastic.
Dimensions. 8-1/2” w. x 15” d. x 7-1/2” h. (216 x 381 x 191 mm).
Weight. Net 14-1/2 lbs. (6.6 kg).
Ordering InformationEI24-0441/02. 110vAC, 60 Hz, 1ø.
AccessoriesEI24-0461. AASHTO Grooving Tool.
Replacement PartsEI24-0451. ASTM Plastic Grooving Tools. Pkg. of 10.
EI24-0435/10. Brass Cup. With mounting holes.
EI24-0435/12. ASTM Slider and Pin Cup Holder Assembly.
Hand-Operated Liquid Limit DevicesASTM D-4318;AASHTO T-89.
Precision molded base and cam components. Precision manufactured brass cup assembly.
Includes ten precision molded Plastic ASTM GroovingTools.Optional Grooving Tool available for testing toAASHTO standards.Optional model available with counter.
The Hand-Operated Liquid Limit Device is designed to determine the liquid limit of soils. The hard rubber base is formed in a mold to maintain the uniformity of hardness, size and density of all devices. Precision molded cam control parts and nylon bearings provide accurate cup drop and smooth operation.
Specifications
Cup. Spun brass; pin and slot mounting.
Base. Molded hard rubber.
Cam. Molded, self-lubricating plastic.
Counter. Records number of cup drops. (Model EI24-0437only).
GroovingTools.
ASTM type; plastic; pkg. of 10 (included).
Weight. Net 5-1/4 lbs. (3.6 kg).
Ordering InformationModel EI24-0437 shown.Optional Grooving Tool (EI24-0461) required to meet AASHTO specifications; not included, order separately.
EI24-0435. Liquid Limit Device.
EI24-0437. Liquid Limit Device with counter.
Replacement PartsEI24-0451. ASTM Plastic Grooving Tools. Pkg. of 10.
EI24-0435/10. Brass Cup. With mounting holes.
EI24-0435/12. ASTM Slider and Pin Cup Holder Assembly.
ASTM Liquid Limit SetASTM D-4318.
This standard set includes Liquid Limit Device without counter and along selection of accessories required for testing to ASTM standards.
Ordering InformationSet includes:
1 Liquid Limit Device with ASTM Grooving Tools (24-0435).1 Graduated Cylinder 100 ml (88-6007).1 Mixing Dish (88-6712).2 Doz. Moisture Content Cans (88-7002).1 Flexible Spatula (88-7500).
EI2800E.
ASTM Plastic Grooving ToolsASTM D-4318.
Inexpensive enough to be disposable.Plastic construction — won’t rust.Precision-molded to conform to ASTM standards.1 cm gage block located at end of handle.
The Plastic Grooving Tool is used to control the width of the soil groove in the liquid limit cup.
With traditional metal grooving tools, the cups get scratched; the costly metal tools get worn, giving inaccurate test results.
Specifications
Construction. Molded polycarbonate resin.
Gage Height. 1 cm.
Weight. Net 3 oz. (85 g).
Ordering InformationEI24-0451. Package of 10.
AASHTO Grooving ToolAASHTO T-89.
Rust resistant brass construction.1 cm gage block located at end of handle.
The AASHTO Grooving Tool is used to control the width of the soil groove in the liquid limit cup, in accordance with AASHTO specifications.
Specifications
Construction. Brass.
Gage Height. 1 cm.
Weight. Net 3 oz. (85 g).
Ordering InformationEI24-0461.
Cone Penetrometer
Reduces operator error.Can be used on a wide range of soils. Provides a direct measurement of penetration.
The cone penetrometer test is based on the relationship between moisture content and the penetration of a cone into the soil sample under controlled conditions.
Specifications
DialIndicator.
150 mm diameter graduated in 400 x 0.1 mm divisions. Indicator incorporates a friction/gear system.
Height. Adjustable using rapid integral clamping mechanism.
ConeRelease.
Manual.
Cone. 1 x 30°, 35 mm test cone included.
Base. Cast aluminum with adjustable leveling feet.
Weight. Net 13.25 lbs. (6 kg).
Ordering InformationModel EI24-0540 series shown with optional Test Cup; not included, order separately.
EI24-0540. Cone Penetrometer.
AccessoriesEI24-0546. Test Gauge. For checking the condition of the cone point.
EI24-0548. Penetration Test Cup. 55 mm diam. x 40 mm deep with rim parallel to the flat base.
Replacement PartsEI24-0544. Penetration Test Cone. Stainless steel; 35 mm long with smooth surface at an angle of 30°.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
46
Soil Testing - Plastic and Shrinkage Limit
For quotations and product pricing go to www.eleusa.com
47
Soil Testing - Classification
Plastic Limit SetASTM D-4318;AASHTO T-90.
The Plastic Limit Set consists of a selection of equipment required to perform the plastic limit test in accordance with ASTM and AASHTO specifications.
Ordering InformationSet includes: 1 Plastic Limit Plate (24-0810) 12” x 12” x 3/8”.1 25 ml Graduated Cylinder (88-6002A).1 Mixing Dish (88-6710).1 Doz. Aluminum Moisture Cans (88-7002).1 Flexible Spatula (88-7500).1 Rod Comparator (24-0811).EI2810E.
Rod ComparatorASTM D-4318;AASHTO T-90; BS-1377.
The Rod Comparator is a 3 mm diameter rod used in the Plastic Limit test as a reference standard to compare against the soil sample during testing.
Ordering InformationEI24-0811.
Shrinkage Prong Plate
The Shrinkage Prong Plate is used to immerse the soil pat in the mercury bath for accurate and reproducible determinations of the soil volume.
Specifications
Construction. Acrylic plastic with 3 metal prongs.
Dimensions. 3” square x 1/8” thick (76 x 3.2 mm).
Weight. Net 1 oz. (28 g).
Ordering InformationEI24-1500.
AccessoriesEI24-1550. Shrinkage Dish.
EI24-1600. Crystallizing Dish.
Shrinkage Limit SetASTM D-427;AASHTO T-92.
The Shrinkage Limit Set consists of a selection of items needed to perform shrinkage limit testing, per ASTM and AASHTO testing standards.
Ordering InformationSet includes:1 Monel Shrinkage Dish (24-1550).1 Crystallizing Dish (24-1600).1 Shrinkage Prong Plate (24-1500).1 25 ml Graduated Cylinder (88-6002A).1 Evaporating Dish (88-6714).EI2820E.Three pounds of mercury and other accessories required for shrinkage limit test; not included.
Proving Ring Penetrometer
Lightweight and compact for easy transport to the field.
The Proving Ring Penetrometer is a 30 degree cone penetrometer used to determine the bearing capacity of subgrades or to measure soil compaction.
Specifications
Proving Ring. 250 lb. (1.1 kN) capacity.
Dial Indicator. Brake type.
Shaft. 3/4” (19 mm) diam. x 18” l. (457 mm); graduated at 6” (152 mm) intervals.
Extension Rod. 3/4” (19 mm) diam. x 36” l. (914 mm); graduated at 6” (152 mm) intervals.
Cone. 30 degree; 1 sq. in.; replaceable.
Handle. Cast aluminum.
Weight. Net 12 lbs. (5.4 kg).
Ordering InformationEI29-3739.
C.O.E. Cone Penetrometer
Reads directly in pounds per square inch (psi). Manufactured in accordance with Corps of Engineersspecifications.
The C.O.E. Cone Penetrometer is the principal instrument used in evaluating soil trafficability. It consists of a 30 degree cone with a 1/2 sq. in. base area, proving ring, dial indicator, extension rod and a handle.
Specifications
Proving Ring. 150 lb. capacity; dial indicator calibrated direct in psi, 0 to 300 psi by 5 psi subdivisions.
Shaft. 5/8” (15.8 mm) diam. x 19” l. (483 mm).
Weight. Net 2 lbs. (0.9 kg).
Ordering InformationEI29-3741.
Proctor & Mortar Penetrometer SetASTM D-1558, C-403.
130 lb. capacity with 1 lb. subdivisions.
Includes 10 interchangeable needles as specified inASTM testing standards for Soils and Mortar.
Plated for rust resistance and long life.
Convenient carrying case with individualcompartments.
The Proctor Penetrometer is used for determining the penetration resistance of fine-grained soils and when selecting the appropriate needles becomes a Mortar Penetrometer set that is used for determining the rate of hardening of mortars sieved from concrete mixtures. The unit consists of a special calibrated spring dynamometer with a pressure-indicating scale on the stem of the handle. The pressure scale is calibrated to 130 lbs. by 1 lb. subdivisions. There is a major division located at each 10 lb. interval. A sliding ring on the stem indicates the maximum load obtained during the test.
Specifications
Penetrometer. Calibrated spring dynamometer.
Pressure Scale. 130 lbs. x 10 lbs. and 1 lb. subdivisions.
Test Reading. Indicated by sliding ring.
Needles. Includes: 1, 3/4, 1/2, 1/3, 1/4, 1/5, 1/10 1/20,1/30 and 1/40 sq. in. end area needles.
Carrying Case. Plastic with shelf; 18” w. x 6” d. x 4-3/4” h.(457 x 152 x 121 mm).
Weight. Net 7 lbs. (3.2 kg).
Ordering InformationEI29-3935. Includes penetrometer, ten needles and carrying case.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
48
Soil Testing - Classification
For quotations and product pricing go to www.eleusa.com
49
Soil Testing - Classification
Pocket Penetrometer
Direct-reading scale in tons/sq. ft. and kg/sq. cm.Ground and polished stainless steel loading piston.
Calibrated spring and penetrometer body plated forrust resistance and long life.Convenient belt-loop style carrying case.Optional Adapter Foot for testing very soft materials.
The Pocket Penetrometer was originally developed for use by field personnel in checking visual classification of soils. Data was compiled on several thousand unconfined compressive strength tests of silty clays and clayey soils against the penetrometer readings to develop the scale. A close relationship exists between the penetrometer’s scale reading and soil type.
Specifications
Range. 0.25 to 4.5 tons/sq. ft. (kg/sq. cm).
Scale Divisions. 0.25 tons/sq. ft. (kg/sq. cm).
Load Piston. 1/4” (6 mm) diam.; stainless steel.
Carrying Case. Canvas; belt-loop style.
Dimensions. 3/4” diam. x 6-3/8” l. (19 x 162 mm).
Weight. Net 7 oz. (198 g).
Ordering InformationShown with Adapter Foot; not included, order separately. EI29-3729.
AccessoriesEI29-3729/10. Adapter Foot. 1” (25.4 mm) diam. Increases piston area 16 times for testing on soft materials.The Pocket Penetrometer does not replace field and laboratory testing analysis.
Torvane Shear Device
Determines shear strength of cohesive soils in thelaboratory or in the field.Lightweight, rust resistant construction.Includes three interchangeable vanes.
The Torvane Shear Device enables the operator to rapidly determine the shear strengths of cohesive soils, in the laboratory or in the field.
The Torvane is simple to use and needs no extensive specimen preparation. All that is required is a flat sample area of at least 2” (50 mm) in diameter.
Specifications
Vane Driver. 1.6” (41 mm) diam. x 3.2” (81 mm) l. with vane attached.
Dial Scale. 1 kg/sq. cm (tons/sq. ft.) x 0.05 subdivisions.
Carrying Case. Plastic; 6” w. x 4” d. x 2” h. (152 x 102 x 51 mm).
Weight. Net 10.5 oz. (300 g).
Ordering InformationEI26-2261. Includes driver, three interchangeable vanes and carrying case.
Replacement PartsEI26-2261/10. Sensitive Vane. 0-0.2 kg/sq. cm (tons/sq. ft.).
EI26-2261/12. Standard Vane. 0-1.0 kg/sq. cm (tons/sq. ft.).
EI26-2261/14. High-Capacity Vane. 0-2.5 kg/sq. cm (tons/sq. ft.).
The Torvane Shear Device does not replace field and laboratory testing analysis.
Hand Vane Tester
Direct-reading scale with max-reading pointer. Provides quick and accurate shear strength values of
cohesive soils.Lightweight carrying case for easy transport to the field.
The Hand Vane Tester is an accurate and portable instrument used for the determination of in-situ shear strength of cohesive soils, either on-site or on undisturbed or remolded samples in the laboratory.
The instrument consists of a torque head with a direct-reading scale which is turned by hand. A non-return type pointer retains the test reading. A 19 mm (0.75”) diameter vane and 300 mm (11.8”) extension rod is supplied as standard.
Specifications
TorqueHead.
Direct-reading with maximum pointer; aluminum construction; graduated in kPa with conversion chart for lbs./sq. ft. and kg/sq. cm.
Vane. 19 mm (0.75”) diam. 0-120 kPa (2,506 lbs./sq. ft.) capacity.
Shaft. 3/4” (19 mm) diam. x 18” l. (457 mm); graduated at 6” (152 mm) intervals.
ExtensionRod.
13” w. x 10-1/2” d. x 3-1/2” h. (330 x 260 x 85 mm).
CarryingCase.
30 degree; 1 sq. in.; replaceable.
Weight. Net 5-1/2 lbs. (2.5 kg).
Ordering InformationEI26-3346. Includes 19 mm (0.75”) vane, extension rod and carrying case.
AccessoriesEI26-3346/10. 33 mm (1.29”) diam. Vane. For readings from 0 - 28 kPa (585 lbs./sq. ft.) and carrying case.
Soil Color Charts
9 constant hue charts displaying 322 colors.Chart sheld in convenient, pocket-sized loose-leaf binder.
Soil Color Charts are widely used by civil engineers, agronomists, soil scientists, geologists, and archaeologists. The set consists of 9 constant hue charts displaying 322 colors on a neutral gray chart stock.
Specifications
Colors. 322 constant hues on 9 charts; including colors for hydric and submerged soils.
Chart Stock Neutral gray.
Chart Size. 7-1/4” x 4-1/4” (184 x 108 mm).
Weight. Net 12 oz. (340 g).
Ordering InformationEI23-7100. Includes pocket-sized loose-leaf binder.
AccessoriesEI23-7120. Tropical Soil Charts. Special charts for reddish tropical soils which are recommended for regions such as South and Central America, Africa, India, Malaysia and similar tropical areas. Includes two charts that fit into EI23-7100 binder.Gley Soil Charts are now included as standard.
Sand Grading Chart
A unique chart useful to soils engineers, geologists, contractors, and soil scientists for uniform classification of sands.
Specifications
Sample Panels. Very coarse; coarse; medium; fine; very fine; silt.
Particle Shape Panels. Angular; sub-angular; sub-rounded and rounded.
Chart Size. 3-1/4” w. x 4” h. (83 x 102 mm).
Weight. Net 1 oz. (28 g).
Ordering InformationEI23-7130.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
50
Soil Testing - Sampling
For quotations and product pricing go to www.eleusa.com
51
Soil Testing - Sampling
Thin Wall Tube Samplers
This sampler is designed to take undisturbed samples in cohesive type soils and clays. The thin steel tube containing the sample may be removed from the sampler head and used as a container for transport to the lab.
Ordering Information
Model No. EI23-1352
O.D. 2”
I.D. 1-7/8”
Sampler Length 30”
Connection AW
Extra Tube EI23-1352/10
Standard Split Tube Samplers
This Split Tube Sampler is designed for taking soil samples at the bottom of a cleaned bore hole by the drive weight method. The split section is held together with a ball check head and hardened steel drive shoe.
Ordering Information
Model No. EI23-1346 EI23-1350
O.D. 2” 2”
I.D. 1-1/2” 1-1/2”
Sampler Length 18” 24”
Connection AW AW
Extra Tube EI23-1346/10 EI23-1350/10
Basket Retainers
Basket retainers have flexible fingers that open to admit loose, dry sand then close to form a tight lock.
Ordering InformationEI23-1356. For 2” Samplers.
Plastic Caps
These caps are used to seal the ends of thin wall tubes.
Ordering InformationEI23-1360. For 2” Thin Wall Sample Tubes.
Horizontal Sample Ejector
Ejects samples from thin wall tubes for laboratorytesting.Accepts a variety of tube sizes.Heavy-duty construction for long service life.
The Horizontal Sample Ejector is designed for the ejection of samples contained in thin wall tubes (Shelby Tubes). The ejector eliminates the necessity for cutting the tube samplers to recover a sample for examination and testing.
With the Horizontal Sample Ejector, specimens can be uniformly pushed from the sampling tubes until the desired length is reached. Equipped with spacers and interchangeable supports, the ejector can accommodate tube samplers varying in length from 4” to 24” (102 mm to 610 mm). The standard ejector is supplied with tube supports and grips for 2” and 3” (50.8 mm and 76.2 mm) diameter tubes.
Specifications
Capacity. 2” and 3” diam. (50.8 and 76.2 mm) x 4” to 24” l. (102 to 610 mm) tubes.
Base. I-Beam construction.
Gear Box. Thrust bearing; hand crank assembly drive.
Mounting. Table or bench.
Weight. Net 119 lbs. (54 kg); Shpg. 145 lbs. (66 kg).
Ordering InformationEI23-1370. Includes tube supports and grips for 2” o.d. (50.8 mm) and 3” o.d. (76.2 mm) tubes.
Sample Ejector
Fast sample extrusion from molds and sampling tubesup to 7” (178 mm) long.6,000 lbf. (26.7 kN) hand-operated hydraulic jack.Bench top design for use in both the laboratory andthe field.
Fast extrusion and ejection of soil samples from molds and short lengths of sample tubing, the ejector has a pushing force of 6,000 lbf. (26.7 kN) which is developed through a hand-operated hydraulic jack.
The unit is supplied complete with accessories for ejecting samples from 2” (50.8 mm) and 3” (76.2 mm) shelby tubes, 4” (101.6 mm) or 6” (152.4 mm) molds, up to 7” (178 mm) long.
Specifications
Pushing Force. 6,000 lbf. (26.7 kN).
Jack. Hydraulic; hand-operated; 7” (178 mm) stroke.
Construction. All metal; plated extrusion plates and piston discs; painted finish on housing and pump.
Dimensions. 10-1/2” w. x 8” d. x 22-1/2” h. (267 x 203 x 571 mm).
Weight. Net 64 lbs. (29 kg); Shpg. 75 lbs. (34 kg).
Ordering InformationEI23-4085.
AccessoriesEI23-4085/10. Ejector Head and adapter plate for 2.5” o.d. x 2.416” tubes.
Basic Auger Kit
Basic soil sampling tools in one field ready kit.Includes access augers, extensions, and core sampler.Accessories included in convenient carrying case.
The Basic Auger Kit has virtually everything you need in one place for obtaining soil samples. It includes all the tools necessary to get down to your required sampling depth with ease under a variety of soil conditions.
Three augers (one each regular, sand and mud), extensions, a core sampler, slide hammer, cross handle and accessories are conveniently packaged in a deluxe carrying case.
Specifications
Augers. Tungsten carbide coated high carbon bits.
Core Sampler. Standard type with slide hammer.
Extensions. Threaded (5/8” thread); 4 ft. (1.2 m) l; three included.
Components. Cross handle, cleaning brush, wrenches.
Weight. 60 lbs. (27 kg).
Ordering InformationEI23-1378. With 3-1/4” (82.5 mm) augers and 2” x 6” (50.8 x 152.4 mm) core sampler.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
52
Soil Testing - Sampling
For quotations and product pricing go to www.eleusa.com
53
Soil Testing - Sampling
Post Hole Augers (Iwan Type)
High strength carbon steel blades.Optional extension shafts for greater depthcapabilities.
Post Hole Augers are widely used for easy and rapid advancement of the sampling hole. High strength carbon steel blades are riveted to a tough malleable iron yoke. The augers are supplied complete with a high strength steel shaft and hardwood handle assembly.
Specifications
Blades. Carbon steel.
Shaft. 36” l. (914 mm).
Handle. Wood.
Weights. EI23-1391: Net 7 lbs. (3.2 kg).EI23-1392: Net 9 lbs. (4.1 kg).EI23-1393: Net 11 lbs. (5 kg).
Ordering InformationEI23-1391. 3” diam. (76 mm).
EI23-1392. 4” diam. (102 mm).
EI23-1393. 6” diam. (152 mm).
AccessoriesEI23-1397. Auger Extension 36” l. (914 mm). Net Wt. 3 lbs. (1.4 kg).
Replacement PartsEI23-1391/10. 3” (76 mm) Blade Head Assembly.
ELE Hand Auger
Heavy-gage, heat-treated bucket for long service life.Cupped blades for easy hole advancement.Easily assembled using quick connector pins.
The ELE Hand Auger system is ideally suited for augering shallow holes in fine grained soils. The cupped blade design allows for easy advancement into the soil with very little effort.
The complete auger system consists of one auger head, one tee handle, one auger extension and quick connector pins.
Specifications
Auger Head. 3-1/4” (82.5 mm). Heavy gage, heat treated carbon steel with cupped blades.
Tee Handle. 36” a Plated steel construction. l. (914 mm).
Extension. 36” (914 mm) long; plated steel construction.
Pins. Used to connect auger head to extension and tee handle.
Weight. Net 6 lbs. (2.7 kg).
Ordering InformationEI23-1400.
Replacement PartsEI23-1400/10. 3-1/4” (85.2 mm) Auger Head with connector pin.
EI23-1400/11. Tee Handle with connector pin.
EI23-1400/12. Auger Extension with connector pin. 36” (914 mm) long.
EI23-1400/13. Connector Pin.
Regular Augers
Extra long, open bail for emptying.5/8” (15.8 mm) threaded extension couplings.
Cutting edges are tungsten carbide hard-surfaced;heat treated before sharpening.Includes 36” (914 mm) extension and chrome crosshandle.
The Regular Auger is used for ordinary soil sampling and for accessing the sampling point when undisturbed samples will be taken with a core sampler. Specially designed bits guarantee easy penetration.
Ordering InformationEI23-1380. 3-1/4” diam. (82.5 mm).
AccessoriesEI23-1389. Auger Extension, 60” (1,524 mm).
Mud Augers
Extra long, open bail for emptying.5/8” (15.8 mm) threaded extension couplings.
Cutting edges are tungsten carbide hard-surfaced;heat treated before sharpening.Includes 36” (914 mm) extension and chrome crosshandle.
The Mud Auger features an open cylinder design facilitating easy removal of heavy, wet soil or clay samples. Bits are similar to the Regular Auger bits but are spaced farther apart.
Ordering InformationEI23-1382. 3-1/4” diam. (82.5 mm).
AccessoriesEI23-1389. Auger Extension, 60” (1,524 mm).
Sand Augers
Extra long, open bail for emptying.15.8 mm) threaded extension couplings.
Cutting edges are tungsten carbide hard-surfaced;heat treated before sharpening.Includes 36” (914 mm) extension and chrome crosshandle.
The Sand Auger was designed for use in extremely dry, sandy soils. Its bits are specially formed to retain sand samples.
Ordering InformationEI23-1384. 3-1/4” diam. (82.5 mm).
AccessoriesEI23-1389. Auger Extension, 60” (1,524 mm).
Dutch Augers
Extra long, open bail for emptying.5/8” (15.8 mm) threaded extension couplings.Cutting edges are heat treated before sharpening.
Includes 36” (914 mm) extension and chrome crosshandle.
The Dutch Auger is hand-forged from high-carbon spring steel and honed to a fine cutting edge. Its design makes it an excellent tool in heavily rooted, fibrous or swampy areas.
Ordering InformationEI23-1386. 3” diam. (76.2 mm).
AccessoriesEI23-1389. Auger Extension, 60” (1,524 mm).
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
54
Soil Testing - Sampling and Water Level
For quotations and product pricing go to www.eleusa.com
55
Concrete
Oakfield SoilSampling Kit
The Oakfield Soil Sampling Kit was developed for rapid sampling in all types of soils. The kit contains a sampling tube for soft loamy soils and an auger for sampling dense, hard or frozen soils.
Although developed for sampling of soils for agricultural purposes, the kit is a valuable tool in preliminary soils investigations of all types.
Specifications
Sampling Tube. 15/16” o.d. x 12-1/2” l. (24 x 318 mm).
Core Size. 3/4” diam. x 9” l. (19 x 229 mm).
Auger. 1-1/4” diam. x 8-1/2” l. (38 x 216 mm).
Extension Rods. Two included; 12” l. (305 mm).
Weight. Net 3 lbs. (1.4 kg).
Ordering InformationEI23-1410. Includes tube and auger samplers, two extension rods, handle and fiber board case.
Replacement PartsEI23-1410/10. Extension Rod.
EI23-1410/12. Sampling Tube.
Sample Bags
Sample Bags are constructed of a high count drill with sewed seams. These Sample Bags have a drawstring cord and are ideal for carrying and shipping samples from field to laboratory.
Ordering Information Unlined:EI23-1420. 10” x 18” (254 x 457 mm).EI23-1422. 17” x 32” (432 x 813 mm).
Water Level Indicators, English Scale
State-of-the-art electronic circuitry. Incorporates both visual and audible indication ofwater contact.
Water Level Indicators are portable instruments used for determining the water level in bore holes, wells, and other open underground structures. The units consist of a cable reel with electronic circuitry and alarm module; a multi-conductor cable with permanent marking at specified intervals; and a stainless steel/teflon sensing probe assembly which is segmented for flexibility. A convenient carrying handle is part of the frame.
Specifications
ElectronicModule.
Single frequency, high efficiency audio sounder; 1/4” (6.35mm) bright red LED visual indicator.
Probe. Stainless steel and Teflon construction; 3/8” o.d. x 1-1/2” l. (9.525 x 38.1 mm) body with 6-3/8” o.d. x 1” l. (9.5 mm x 25.4 mm) weights.
Cable. 24 gage, two conductor copper-coated steel wire; black numbers and red reference marks.
Weights. 100-150 ft.: Net 4 lbs 2 oz. (1.8 kg).300-500 ft.: Net 5 lbs. 6 oz. (2.4 kg).
Ordering InformationEI23-1750. 100 ft. depth capacity.
EI23-1751. 150 ft. depth capacity.
EI23-1752. 300 ft. depth capacity.
EI23-1753. 500 ft. depth capacity.
AccessoriesEI23-1754. Plastic Carrying Case.
Replacement PartsEI23-1755/10. Probe Assembly.
EI23-1752/10. 300 ft. Cable.With 1 ft. markings.
EI23-1753/10. 500 ft. Cable.With 1 ft. markings.
57 ASTM Compression Tester60 ASTM Compression Tester
Accessories66 Sample Preparation74 Non-Destructive Testing79 Air Content81 Consistency and Workability84 Density and Unit Weight
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
56
Concrete
For quotations and product pricing go to www.eleusa.com
57
Concrete - ASTM Compression Tester
ACCU-TEK™ 500 Digital SeriesASTM C-39;AASHTO T-22.
Selectable display in English and Metric units.Pace Deviation Bar Graph.Automatic stress calculation and display.Safety guards provided as standard.Safety overtravel and overload protection.Adaptable, using a wide range of accessories.Rapid-change platen mounting system.Meets ASTM and AASHTO specifications.
The ACCU-TEK™ 500 Digital Series compression tester meets the demands of extensive load capacity testing by combining microprocessor technology with rugged solid steel frame construction for testing high strength concrete. The space-saving single unit design consists of a heavy duty 500,000 lbf. (2,224 kN) capacity load frame, hydraulic pump and digital display system.
The large lower bearing block, combined with a bellows, eliminates hydraulic leaks by preventing dust and debris from entering the piston/cylinder seal area of the load frame. The 14” (355 mm) wide horizontal opening provides complete accessibility for loading specimens.
With the rapid-change platen system, the operator can quickly and easily mount a wide range of accessories to the upper crosshead for cylinder, cube, beam, and block specimen testing – from 2” (50 mm) cubes to 12” (305 mm) masonry blocks.
Specifications
Capacity. 500,000 lbf. (2,224 kN).
VerticalClearance.
19.62” (498 mm) without upper platen assembly.
HorizontalClearance.
14” (355 mm) between uprights.
Ram. 8.75” (222 mm) diameter; 2.5” (64 mm) stroke with overtravel limit switch protection.
Pump. 1 h.p. (0.7 kw) electro-hydraulic pump mounted within reservoir with overload protection.
HydraulicControls.
Pressure compensated flow control valve with 4-position control lever and adjustable flow valve. Pump Start/Stop Push-buttons.
Lower Platen. 12” w. x 16” d. x 2” h. (305 x 406 x 50 mm) with scribed concentric circles and lines.
Display System. Digital display with membrane keypad; pace deviation bargraph; automatic stress calculation; date storage for 500 tests; RS232Cdata output and printer ports.
Range. 5,000 to 500,000 lbf. (22.4 to 2,224 kN.).
Accuracy. Factory calibrated to within 1.0% of reading - from 1% to 100% of machine capacity.
Dimensions. 31.25” w. x 21” d. x 50.75” h. (794 x 533 x 1,289 mm).
Weight. Net 1,700 lbs. (771 kg).
Ordering InformationUpper platen assembly and frame stand not included; order separately.
EI36-3088/02. 110vAC, 60 Hz, 1ø.
EI36-3088/06. 220vAC, 60 Hz, 1ø.
EI36-3088/01. 220vAC, 50 Hz, 1ø.
AccessoriesEI37-5500. Platen Set for 6” x 12” (152 x 305 mm) Concrete Cylinders.
E137-5561. Pedestal for testing 4” x 8” Cylinders, requires 37-5500.
EI37-5504. Platen Set for 3” x 6”(76 x 152 mm) Concrete Cylinders.
EI37-5510. Platen Set for 2” (50 mm) Cube.
EI37-5518. Platen Set for Blocks up to 12” (300 mm).
EI37-5526. Flexural Attachment.
EI37-5575. Frame Stand.
EI37-4861/02. Portable Impact Tape Printer, Serial Interface.110vAC, 50/60 Hz, 1ø.
Replacement Parts:4699-1316. Ram Seal
9806-0016. Accutek Oil
ACCU-TEK™ 350 Digital SeriesASTM C-39;AASHTO T-22.
Automatic stress calculation and display.RS-232C communication port.Solid steel side member construction.Front and rear safety guards provided as standard.Meets ASTM and AASHTO specifications.Adaptable, using a wide range of accessories.Rapid-change platen mounting system.
For testing a wide range of concrete specimens, the ACCU-TEK™ 350 Digital Series compression tester provides the ruggedness of solid steel frame construction with the microprocessor technology of the ELE Advanced Digital Readout System. The compact single unit design consists of a heavy duty 350,000 lbf. (1,555 kN) capacity load frame, hydraulic pump and digital readout system.
The 11.5” (292 mm) wide day light opening of the frame provides accessibility and convenience for placing specimens. Front and rear safety guards are supplied as standard. The rapid-change platen system facilitates mounting accessories to the upper crosshead. A wide range of accessories is available for cylinder, cube, beam, and block specimen testing – from 2” (50 mm) cubes to 10” (254 mm) blocks.
Specifications
Capacity. 350,000 lbf. (1,555 kN).
VerticalClearance.
19.75” (502 mm) without upper platen assembly.
HorizontalClearance.
11.5” (292 mm) between uprights.
Ram. 7.716” (196 mm) diameter; 2” (50 mm) stroke.
Pump. 1 h.p. (0.7 kw) electro-hydraulic pump mounted within reservoir with overload protection.
Controls. Pump-mounted pressure compensated flow control valve with 4-position control lever and adjustable flow valve. Pump on/off switch.
Lower Platen. 10” w. x 14” d. x 1” h. (254 x 355 x 25.4 mm).
Display System. Digital display with membrane keypad; pace deviation bargraph; automatic stress calculation; data storage for 500 tests; RS232C data output and printer ports.
Range. 3,500 to 350,000 lbf. (15.5 to 1,555 kN.)
Accuracy. Factory calibrated to within 1.0% of reading - from 1% to 100% of machine capacity.
Dimensions. 27” w. x 18” d. x 44” h. (686 x 457 x 1,118 mm).
Weight. Net 850 lbs. (385 kg).
Ordering InformationUpper platen assembly and frame stand not included; order separately.
EI36-0718/02. 110vAC, 60 Hz, 1ø.
EI36-0718/06. 220vAC, 60 Hz, 1ø.
EI36-0718/01. 220vAC, 50 Hz, 1ø.
AccessoriesEI37-5500. Platen Set for 6” x 12” (152 x 305 mm) Concrete Cylinders.
E137-5561. Pedestal for testing 4” x 8” Cylinders, requires 37-5500.
EI37-5504. Platen Set for 3” x 6” (76 x 152 mm) Concrete Cylinders.
EI37-5510. Platen Set for 2” (50 mm) Cube.
EI37-5520. Platen Set for Blocks up to 10” (254mm).
EI37-5524. Flexure Attachment.
EI37-5575. Frame Stand.
EI37-4861/02. Portable Impact Tape Printer, Serial Interface. 110vAC, 50/60 Hz, 1ø.
Replacement Parts:4699-1315. Ram Seal
9806-0016. Accutek Oil
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
58
Concrete - ASTM Compression Tester
For quotations and product pricing go to www.eleusa.com
59
Concrete - ASTM Compression Tester
ACCU-TEK™ 250 Digital SeriesASTM C-39;AASHTO T-22.
Selectable display in English or Metric units.Automatic stress calculation and display.RS-232C communication port.Adjusts for capping compound or capping padmethod, by removing the platen spacer.Includes platens for testing standard 6” x 12” (152x 305 mm) cylinders, frame stand, and downloadsoftware with RS-232 cable.
The lightweight, portable ACCU-TEK™ 250 Digital Series compression tester offers economical, affordable quality testing on-site or in the lab. Each tester consists of a heavy duty load frame, hydraulic pump and digital readout system.
The compact single unit design offers a large surface area on the lower platen and a 9” (229 mm) wide horizontal opening between the steel uprights. All hydraulic pump operating controls are mounted on the front of the unit for easy access, and the built-in overload protection provides machine and operator safety. Supplied complete with standard platens, the ACCU-TEKTM 250 machines can test 6” x 12” (152 x 305 mm) cylinders, using either the capping compound or capping pad methods. Optional attachments make it easy to perform flexure, cube, block, and small cylinder testing.
Specifications
Capacity. 250,000 lbf. (1,112 kN).
Frame. Upper and lower steel plate sections with four steel uprights, threaded and welded into place; 14.75” w. x 12” d. x 37” h. (375 x 305 x 940 mm).
Ram. 6-1/8” (155 mm) diameter; 3” (76 mm) travel.
Upper Platen. Swivel seat type; 6-1/4” (159 mm) diameter.
Lower Platen. 7” (178 mm) diameter.
VerticalClearance.
12-1/2” (318 mm); or 14-1/2” (368 mm) with lower spacer removed.
HorizontalClearance.
9” (229 mm) between uprights.
Pump. 1 h.p. (0.7kw) electro-hydraulic pump mounted within reservoir with overload protection.
Controls. Pump-mounted pressure compensated flow control valve with 4-position control lever and adjustable flow valve. Pump On/Offswitch.
Display. Digital display with membrane keypad; pace deviation bargraph; automatic stress calculation; data storage for 500 tests; RS232Cdata output and printer ports.
Range. 2,500 to 250,000 lbf. (11.2 to 1,112 kN).
Accuracy. Factory calibrated to within 0.5% of reading - from 1% to 100% of machine capacity.
OverallDimensions.
25.5” w. x 12” d. x 45” h. (648 x 305 x 1,143 mm).
Weight. Net 535 lbs. (243 kg).
Ordering InformationEI36-0650/02. 110vAC, 60 Hz, 1ø.
EI36-0650/06. 220vAC, 60 Hz, 1ø.
EI36-0650/01. 220vAC, 50 Hz, 1ø.
AccessoriesEI37-5561. Pedestal for testing 4” x 8” Cylinders. For use with Upper Platen Assembly supplied with machine.
EI37-5508. Platen Set for 3” x 6” (76 x 152 mm) cylinders.
EI37-5514. Platen Set for 2” (50 mm) cubes.
EI37-5516. Platen Set for 6” (150 mm) cubes.
EI37-5522. Platen Set for 8” x 8” x 16” (203 x 203 x 406 mm) blocks.
EI37-5528. Flexure Attachment.
EI37-4861/02. Portable Impact Tape Printer, Serial Interface. 110vAC, 50/60 Hz, 1ø.
Replacement Parts:CT-992 Ram Seal Kit.
9806-0016 Accutek Oil.
ACCU-TEK™ 250 Economy SeriesASTM C-39;AASHTO T-22.
Digital Readout.Adjusts for capping compound or capping padmethod, by removing the platen spacer.Includes platens for testing standard 6” x 12”(152 x 305 mm) cylinders.Supplied with Safety Guard Doors as standard.
The lightweight, portable ACCU-TEK™ 250 Series compression testers offer economical, affordable quality testing on-site or in the lab.
The compact single unit design offers a large surface area on the lower platen and a 9” (229 mm) wide horizontal opening between the steel uprights. All hydraulic pump operating controls are mounted on the front of the unit for easy access, and the built-in overload protection provides machine and operator safety. Supplied complete with standard platens, the ACCU-TEKTM 250 machines can test 6” x 12” (152 x 305 mm) cylinders, using either the capping compound or capping pad methods.
The complete system meets ASTM C-39 and AASHTO T-22 specifications.
Specifications
Capacity. 250,000 lbf. (1,112 kN).
Frame. Upper and lower steel plate sections with four steel uprights, threaded and welded into place; 14.75” w. x 12” d. x 37” h. (375 x 305 x 940 mm).
Ram. 6-1/8” (155 mm) diameter; 3” (76 mm) travel.
Upper Platen. Swivel seat type; 6-1/4” (159 mm) diameter.
Lower Platen. 7” (178 mm) diameter.
VerticalClearance.
12-1/2” (318 mm); or 14-1/2” (368 mm) with lower spacer removed.
HorizontalClearance.
9” (229 mm) between uprights.
Pump. 1/2 h.p. (0.35kw) electro-hydraulic pump mounted within reservoir with overload protection.
Controls. Pump-mounted pressure compensated flow control valve with 4-position control lever and adjustable flow valve. Pump On/Offswitch.
Digital Readout. Digital readout with membrane keypad; pace deviation bargraph. Range. 2,500 to 250,000 lbf. (11.2 to 1,112 kN). Accuracy. Factory calibrated to within 0.5% of reading - from1% to 100% of machine capacity.
OverallDimensions.
25.5” w. x 12” d. x 45” h. (648 x 305 x 1,143 mm).
Weight. Net 535 lbs. (243 kg).
Ordering InformationEI36-0640/02. ACCU-TEK™ 250 Economy Digital Series. 110vAC, 60 Hz, 1ø.
EI36-0640/06. ACCU-TEK™ 250 Economy Digital Series. 220vAC, 60 Hz, 1ø.
EI36-0640/01. ACCU-TEK™ 250 Economy Digital Series. 220vAC, 50 Hz, 1ø.
AccessoriesEI37-5561. Pedestal for testing 4” x 8” cylinders. For use with Upper Platen Assembly supplied with machine.
EI37-5508. Platen Set for 3” x 6” (76 x 152 mm) cylinders.
EI37-5514. Platen Set for 2” (50 mm) cubes.
EI37-5516. Platen Set for 6” (150 mm) cubes.
EI37-5522. Platen Set for 8” x 8” x 16” (203 x 203 x 406 mm) blocks.
EI37-5528. Flexure Attachment.
EI37-5570. Frame Stand.
EI37-4855/35. ADR Software
EI37-4861/02. Portable Impact Tape Printer, Serial Interface
Replacement Parts:CT-992. Ram Seal Kit
9806-0016. Oil for Accutek
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
60
Concrete - ASTM Compression Accessories
For quotations and product pricing go to www.eleusa.com
61
Concrete - ASTM Compression Accessories
ADR Advanced Digital Readout
Menu-driven with simple data entry.Peak hold and auto stress calculation.RS232C output.Pace deviation bar graph for accurate load rateapplications.
The ADR Advanced Digital Readout incorporates the latest in microprocessor technology. Its advanced facilities for data acquisition, calculation and presentation provide a very effective upgrade path for your existing compression testing machines.
Procedures are easily executed on the touch-button data entry keypad with results viewed on the large, backlit LCD display.
Accurate load pacing is assured by means of the pace deviation bar graph incorporated into the display. The stress is calculated automatically at specimen failure and then displayed in engineering units.
Automatic storage for data for 500 tests is possible. Using the serial RS232C communication port, data can be sent to personal computers or printers for hard copy printout of the tests.
Specifications
Inputs. 2, via standard 5 pin DIN sockets.
Input Range. +/-20 mV to +/-2 V FS.
Transducer Excitation. 10 V @ 100 mA (total).
Measurement Units. Lbf, kN or kgf (selectable).
Accuracy. Better than +/- 1% over the calibrated range.
Display. 4 rows x 20 characters LCD.
Dimensions. 14.2” w. x 12.6” d. x 5.1” h. (360 x 320 x 130 mm).
Weight. Net 10 lbs. (4.5 kg).
Ordering InformationPressure transducer and software not included, see accessories below. On-site calibration is required after the transducer and ADR are connected to the compression tester.
EI37-4855/09. 110-220vAC, 50-60 Hz, 1ø.
AccessoriesEI37-4855/10. Pressure Transducer. 0-10,000 psi (0-68,947 kPa) range.
EI37-4855/35. ADR Data Acquisition Program.
EI37-4861/02. Portable Impact Tape Printer, Serial Interface. 110vAC, 50/60 Hz, 1ø.
ADR Acquisition Software
The ADR Acquisition Program allows the user to download data from the EI37-4855 series ADR Advanced Digital Readout.
Ordering InformationEI37-4855/35. Supplied on CD-Rom. Complete with RS232C cable.
Electric Pump Attachment
Converts manually operated compression testers inminutes.
Lightweight and portable for easy transport.Pressure compensated flow control valve.
The Electric Pump Attachment is used for converting manually operated compression testers into motorized units with variable loading control.
Specifications
Motor. 1 h.p. (0.7 kw).
Flow ControlValve.
Pressure compensated system; regulates variable flow and relieves excess delivery back into reservoir
Hydraulic Fluid/Delivery.
Variable; from 2 cu. in./min. to maximum pump capacity.
NormalOperatingPressure.
Swivel seat type; 6-1/4” (159 mm) diameter.
Weight. Net 80 lbs. (36 kg).
Ordering InformationEI37-5574/02. 110vAC, 60 Hz, 1ø.
EI37-5574/06. 220vAC, 60 Hz, 1ø.
Replacement Parts9806-0016. Oil, 1 gallon.
Frame Stands
Raises frame off floor to a more convenient height forspecimen loading.
The Frame Stand is used to raise any of our compression testers to a convenient height. Raising frames off the floor reduces the need for technicians to bend over during specimen placement.
Specifications
Construction. Steel; with shelf and mounting holes for frame and floor bolting. Mounting bolts included.
Dimensions. EI37-5570: 20-1/2” w. x 17-1/2” d. x 15” h.(520 x 444 x 381 mm).EI37-5575: 29” w. x 20” d. x 20” h.(736 x 508 x 508 mm).
Weight. EI37-5570: Net 85 lbs. (38.5 kg).EI37-5575: Net 200 lbs. (90.7 kg).
Ordering InformationEI37-5570. For Accu-tek 250 Series Compression Testers.
EI37-5575. For Accu-tek 350 and 500 Series Compression Testers.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
62
Concrete - ASTM Compression Accessories
For quotations and product pricing go to www.eleusa.com
63
Concrete - ASTM Compression Accessories
Rapid-Change Cylinder Platen SetsASTM C-39;AASHTO T-22.
Designed for easy mounting.Meet ASTM and AASHTO requirements.Precision ground and hardened.
These Cylinder Platen Sets are designed to be used on all of our ASTM Compression Testers that use the Rapid-Change mounting system.
Model EI37-5500 Platen Set shown mounted on ACCU-TEK™ 500 series load frame.
Ordering InformationEI37-5500. Platen Set for 6” x 12” (152 x 305 mm) Cylinders. Consists of one upper platen assembly (EI37-5550) and one spacer (EI37-5552).EI37-5561. Pedestal for testing 4” x 8” Cylinders, requires 37-5500.
EI37-5504. Platen Set for 3” x 6” (76 x 152 mm) Cylinders. Consists of one upper platen assembly (EI37-5556), two pedestal spacers (EI37-5558 & EI37-5560),and one pedestal (EI37-5562).
ACCU-TEK™ 250 SeriesCylinder Platen SetsASTM C-39;AASHTO T-22.
Easy installation.Precision ground and hardened.Two sizes available.Meet ASTM and AASHTO specifications.
The Cylinder Platen Set is used to test concrete cylinders in the ACCU-TEK™ 250 series compression tester. The set provides the convenience of having all components needed for the size of the cylinder being tested. All platens and spacers are precision ground and hardened. The accessory easily mounts into the load frame.
Specifications
Construction. Precision ground and hardened steel; plated for rust and corrosion resistance.
Weights. EI37-5506: Net 41 lbs. (18 kg).EI37-5508: Net 25 lbs. (11 kg).
Ordering InformationE137-5561. Pedestal for testing 4” x 8” Cylinders. For use with Upper Platen Assembly supplied with machine.
EI37-5508. Platen Set for 3” x 6” (76 x 152 mm) Cylinders. Consists of lower platen and two spacers.
Rapid-Change Cube Platen SetsASTM C-109.
Toe hitch design on upper platen assembly for easymounting.All necessary components included in set.Precision ground and hardened.
With all necessary components included, the Cube Platen Set simplifies testing 2” (50 mm) and 6” (152 mm) cubes on all ASTM Compression Testers using the Rapid-Change platen mounting system.
Ordering InformationModel EI37-5510 Platen Set shown mounted in ACCU-TEK™ 500 series load frame.
EI37-5510. Platen Set for 2” (50 mm) Cubes. Consists of one upper platen assembly (EI37-5556), one spacer (EI37-5564), one pedestal spacer (EI37-5560), and one pedestal (EI37-5562).
ACCU-TEK™ 250 Series Cube Platen SetsASTM C-109.
Designed for easy attachment.Precision ground and hardened.Available for 2” (50 mm) and 6” (150 mm) cubes.
The Cube Platen Sets are used for compressive strength testing of cubes on the ACCU-TEK™ 250 series concrete compression testers. The platens are designed to easily attach to the tester and are precision ground and hardened. They are manufactured in accordance with ASTM specifications.
Specifications
Construction. Precision ground and hardened steel; plated for rust and corrosion resistance.
Weight. EI37-5514: Net 23 lbs. (10 kg).EI37-5516. Net 53 lbs. (24 kg).
Ordering InformationModel EI37-5514 shown mounted on ACCU-TEK™ 250 series load frame.
EI37-5514. Platen Set for 2” (50 mm) Cubes. Consists of upper platen (EI37-5514/12). and lower platen (EI37-5514/10).
EI37-5516. Platen Set for 6” (150 mm) Cubes.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
64
Concrete - ASTM Compression Accessories
For quotations and product pricing go to www.eleusa.com
65
Concrete - ASTM Compression Accessories
Rapid-Change Block Platen SetsASTM C-140.
Rapid-change upper platen assembly which mounts tosystem by means of a holding stem.Contact surface which is hardened and precisionground to meet industry standards. Scribe marks on the lower bearing block forconvenient positioning of sample.
The Block Platen Set is used to apply a compressive force to masonry products up to 10” (254 mm) in size on the ACCU-TEK™ 350 series tester and up to 12” (300 mm) in size on the ACCU-TEK™ 500 series concrete compression testers. The accessory mounts on the frame by means of our rapid-change upper platen mounting system.
Ordering InformationModel EI37-5518 Platen Set shown mounted on ACCU-TEK™ 500 series load frame.
For use on ACCU-TEK™ 500 series:EI37-5518. Platen Set for Blocks up to 12” (300 mm). Consists of block platen assembly (EI37-5568) and spacer (EI37-5552).
For use on ACCU-TEK™ 350 series:
EI37-5520. Platen Set for Blocks up to 10” (254 mm). Consists of upper platen assembly only.
ACCU-TEK™ 250 Series Block Platen SetsASTM C-140.
Designed for easy mounting.Precision ground and hardened.Plated for rust resistance and long life.
The Block Platen Set is used for testing 8” x 8” x 16” (200 x 200 x 406 mm) blocks on the ACCU-TEK™ 250 series concrete compression tester. The set consists of an upper and lower platen which easily mount on the tester. The platens are precision ground and hardened.
Specifications
Construction. Precision ground and hardened steel; plated for rust and corrosion resistance.
Weight. Net 173 lbs. (78 kg).
Ordering InformationModel EI37-5522 shown mounted on ACCU-TEK™ 250 series load frame.
EI37-5522.
Rapid-Change Flexure AttachmentsASTM C-78, C-293;AASHTO T-97.
Adjustable loading block for testing various lengths ofspecimens.Center point or third point loading.Meets ASTM and AASHTO specifications.
These flexure attachments are designed for use on all ASTM Compression Testers using the Rapid-Change mounting system. They are used to apply center or third point loading methods to beams for the determination of the modulus of rupture. The upper loading head has drilled and tapped mounting holes for the adjustment of the bearing blocks from single to third point loading configurations.
The lower support channel has drilled and tapped mounting holes that allow for the adjustment for beams that range in length from 12” (305 mm) to 30” (760 mm). The bearing blocks are flexible so that the force applied to the beam will be vertical only and applied without eccentricity.
Specifications
Loading. Center point or third point.
Blocks. Flexible to keep axes normal to specimen surface at compression point.
Lower Head. Adjusts for sample lengths of 12” (305 mm) to 30” (760 mm).
Upper Head. Uses toe hitch design to mount to upper crosshead.
Ordering InformationModel EI37-5526 Flexure Attachment shown mounted on ACCU-TEK™ 500 series load frame.
EI37-5524. For use on ACCU-TEK™ 350 series compression testers.
EI37-5526. For use on ACCU-TEK™ 500 series compression testers.
ACCU-TEK™ 250 SeriesFlexure AttachmentsASTM C-78, C-293;AASHTO T-97.
Adjustable loading blocks for testing various lengthsof beams.Center point or third point loading.Meets ASTM and AASHTO specifications.
The Flexure Attachment for the ACCU-TEK™ 250 series compression tester is designed for rapid conversion of the compression tester into a beam testing machine. The Flexure Attachment can be set for either center or third point loading on various lengths of beams. The transverse blocks are flexible so that at all times during the flexure test their axes are normal to the surface of the specimen.
Specifications
Loading. Center point or third point.
Blocks. Flexible to keep axes normal to specimen surface at compression point.
Lower Head. Adjusts for beam lengths of 18”, 21”, 24”, 30” and 36” (457, 533, 610, 762 and 914 mm).
Upper Head. Fastens to upper platen by 4 spools.
Weight. Net 175 lbs. (79 kg).
Ordering InformationModel EI37-5528 shown mounted on ACCU-TEK™ 250 series load frame.
EI37-5528. For use on ACCU-TEK™ 250 series models, EI36-0650 and EI36-0655.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
66
Concrete - Sample Preparation
For quotations and product pricing go to www.eleusa.com
67
Concrete - Sample Preparation
Concrete CylinderCompressometer-ExtensometersASTM C-469.
Readability to 50 microinches (0.00124 mm).Measures both axial and diametrical deformation.Lightweight aluminum alloy frame construction.Stainless steel control rods with machined steelmounting points.Available in English or Metric models.
The Compressometer-Extensometer is designed in accordance with ASTM standards for the measurement of axial and diametrical deformation of molded 6” x 12” (152 x 305 mm) cylinders.
Specifications
Sample Size. 6” diam. x 12” l. (152 x 305 mm) cylinder.
Frame. Aluminum-magnesium alloy.
Contact Points. Steel.
Control Rods. Stainless steel.
Dial Indicators. Two included.
Readability. To 50 micro inches (0.00124 mm).
Weight. Net 15 lbs. (6.8 kg).
Ordering InformationEI37-5625. With English reading dial indicators.
EI37-5626. With Metric reading dial indicators.
Laboratory Concrete Mixer
3 cu. ft. (85 liter) mixing capacity.All steel yoke and drum yoke.
The Laboratory Concrete Mixer is designed for mixing trial batches for mix designs. The welded steel drum and integral ring gear are combined with an all-welded steel frame to deliver long, reliable service with smooth and quiet operation. A five position adjustable drum lock allows the drum to be set at the best possible mixing angle.
Specifications
Mixing Capacity. 3 cu. ft. (85 liters).
Drum Capacity. 5-1/2 cu. ft. (156 liters).
Drum Diameter. 26” (660 mm).
Motor. 1/3 h.p.
Dimensions. 41” l. x 26” w. x 55” h. (1041 x 660 x 1,397 mm).
Weight. Shpg. 300 lbs. (145 kg).
Ordering InformationElectric motor and hand tow kit included, but not shown. Assembly required on-site.
EI34-3592/02. 110vAC, 60 Hz, 1ø.
Vibrating Table
Speed 3,600 vpm.Heavy-duty design with steel framework and deck.Adjustable controller to vary vibrator amplitude.
The Vibrating Table is ideal for vibrating concrete beam forms, cylinder molds and manufactured concrete products. The table will handle loads up to 300 lbs. (136 kg). The high-speed (3,600 vpm) of these tables, coupled with a controlled low-amplitude that does not exceed 1/16” (1.58 mm) linear vibration, produces a gentle settling action. Through this action, the coefficient of friction of the material is reduced. As the material settles, the entrapped air is more readily removed.
Specifications
Capacity. Up to 300 lbs. (136 kg).
Deck. Cushioned steel; 20” w. x 20” d. (508 x 508 mm).
Vibrator. High-speed 3,600 vpm; electromagnetic.
Control Panel. Separate; includes operating switch, fuse, rectifying element and amplitude control dial.
Amplitude. Variable from 0 to 1/16” (1.58 mm) linear vibration.
Dimensions. 20” w. x 20” d. x 10” h. (508 x 508 x 254 mm).
Weight. Net 175 lbs. (79 kg); Shpg. 200 lbs. (91 kg).
Ordering InformationControl panel included, but not shown.
EI34-6222/02. 115vAC, 60 Hz, 1ø. 100 Watts.
Laboratory Vibrator
Flexible shaft for full vibrating flexibility and long life.
The Laboratory Vibrator is used in vibrating concrete test cylinders and beams in both the laboratory and in the field.
Specifications
Tip. 1-3/8” diam. x 14” l. (35 x 356 mm).
Shaft. 24” l. (610 mm).
Speed. 10,000 rpm.
Motor. Electric.
Weight. Net 14 lbs. (6.3 kg).
Ordering InformationEI34-6430/02. 110vAC or DC, 50/60 Hz, 1ø.
Pocket Tachometer
Pocket size instrument for checking speed in RPM orvibration in CPM.
Includes carrying case.
This Pocket Tachometer is recommended for use by engineers concerned with concrete construction operations. It is possible to check forms for the vibration which is being imparted by vibrators to make sure that the vibration is going to all parts of the form.
Specifications
Wire Reed. Steel.
Tuning Slide. Indicates speed.
Scale. Direct-reading; range from 2,000 to 21,000 x 1,000; CPM (vibrations) or RPM (speed).
Tolerance. ±5%.
Weight. Net 8 oz. (227 g).
Ordering InformationEI34-6432. Includes carrying case.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
68
Concrete - Sample Preparation
For quotations and product pricing go to www.eleusa.com
69
Concrete - Sample Preparation
Master Humidifier
The Master Humidifier produces 5 pounds (2 kg) of water vapor per hour. The unit is designed to develop about 95% humidity in 30 minutes in a 2,000 cubic-foot room with moderately insulated, non-absorbent walls and without appreciable air exchange.
Specifications
Evaporation Rate. 1/2 gal./hr.; incomplete evaporation after 95% humidity.
Output. 5 lbs. vapor/hr. (2 kg/hr.); up to 6 ft. (2 m) horizontally.
Coverage. 2,000 ft3 room with moderately insulated, non-absorbent walls, and without appreciable air exchange.
Motor. Sealed, ball-bearing type.
Water Reservoir. Heavy gage copper; lacquer finish.
Water Valve Float. Brass; adjustable.
Water Supply. Cold; connects through 1/8” (3.2 mm) male pipe thread.
Operating WaterPressure.
10-100 psig (0.7-7.03 kg/cm2).
Dimensions. 14-1/4” (369 mm) diam. x 10-1/2” (267 mm) h.
Weight. Net 19 lbs. (8.6 kg).
Ordering InformationEI34-6775/02. 110-120vAC, 60 Hz, 1ø. 90 Watts.
AccessoriesEI34-6777/02. Humidistat Controller. 110vAC, 60 Hz, 1ø.
Concrete Curing Tanks
Heavy-duty galvanized steel construction with zinccoating for long life.
Specifications
Construction. 20-gage sides with 20-gage bottom with zinc coating; rolled top for added stiffness; drain plug.
Dimensions. EI34-6763: 72” l. x 30” w. x 24” d. (1,829 x 762 x 610 mm).EI34-6764: 96” l. x 36” w. x 24” d. (2,438 x 914 x 610 mm).
Weights. EI34-6763: Net 90 lbs. (41 kg).EI34-6764: Net 130 lbs. (59 kg).
Ordering InformationShown with Curing Tank Heater; not included, order separately.
EI34-6763. 182 Gal. capacity.
EI34-6764. 300 Gal. capacity.
AccessoriesEI34-6768/02. Curing Tank Heater. 110vAC, 50/60 Hz, 1ø.
EI34-6765/01. Curing Tank Heater. 220vAC, 50/60 Hz, 1ø.
Curing Tank Heaters
Thermostatically controlled heating coils. Easily mounts on curing tank.
Specifications
Construction. Thermostatically controlled with solid state circuitry for warming up to 160°F (71°C); mounted on aluminum base; 22 1/2” (572mm) overall length. For use on tanks where the temperature does not fall below 55°F (13°C).
Weights. Net 5 lbs. (2.3 kg).
Ordering InformationEI34-6768/02. Curing Tank Heater. 110vAC, 50/60 Hz, 1ø. 1,000 Watts.
EI34-6765/01. Curing Tank Heater. 230vAC, 50/60 Hz, 1ø. 1,000 Watts.
Capping Compound Warming Pots
Space-saving, table-top design. Even heat distribution. Thermostatic controlled for accurate heating. Replaceable heating elements.
The Warming Pot is designed for use in any laboratory for melting and maintaining the temperature of capping compounds, paraffins and sealing waxes. All Warming Pots are equipped with a cover, pilot light, and adjustable thermostat. Mounted on an air cooled base, the pots incorporate fiberglass and air insulation to keep heat losses to a minimum.
Specifications
Capacity. 4 qt. (3.7 liters).
TemperatureRange.
150°F to 450°F (65°C to 250°C).
Control. Adjustable, automatic thermostat with pilot light.
Construction. Round aluminum pot with steel jacket; with cover.
Inside Dimensions. 8” diam. x 5-1/2” d. (203 x 140 mm).
OutsideDimensions.
9” diam. x 10” h. (229 x 254 mm).
Weights. Shpg. 13 lbs. (5.9 kg).
Ordering InformationEI34-6125/02. 4 Qt. (3.7 liter) capacity. 110vAC, 50/60 Hz, 1ø. 1,250 Watts.
EI34-6125/01. 4 Qt. (3.7 liter) capacity. 220vAC, 50/60 Hz, 1ø. 1,250 Watts.
AccessoriesEI81-0701. Capping Ladle. Stainless steel.
6” (152 mm) Cylinder CapperASTM C-617;AASHTO T-231.
Rust-resistant aluminum frame construction.
Specifications
Frame. Aluminum alloy with integral handle and sample placement guides.
Capping Plate. Hardened, ground steel; 9/16” (155 mm) thick; removable for regrinding; rotates for even wear.
Guide Ring. Tapers to 6-1/8” (155 mm) diam. clearance; removable.
Weight. Net 22 lbs. (10 kg).
Ordering InformationEI34-6093.
4” (102 mm) Cylinder Capper
Rust-resistant aluminum frame construction.
Specifications
Frame. Two-piece cast aluminum construction; adapts to optional capping plates.
Capping Plate. Two-piece construction; for 4” (102 mm) diam. specimens.
Overall Dimensions. 6” w. x 8” d. x 7” h. (152 x 203 x 178 mm).
Weight. Net 10 lbs. (4.5 kg).
Ordering InformationEI34-6095.
AccessoriesEI34-6095/10. 2” (51 mm) Capping Plate. One-piece construction.
EI34-6095/12. 3” (76 mm) Capping Plate. One-piece construction.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
70
Concrete - Sample Preparation
For quotations and product pricing go to www.eleusa.com
71
Concrete - Sample Preparation
Flake Capping CompoundASTM C-617.
Flake form for easy and convenient handling. Consistent from one box to the next. Plasticized for minimum odor and even load
distribution. Minimum compressive strength of 5,000 psi after 2
hours of cooling. Wide pouring range and highly reusable.
Supplied in flake form, this Capping Compound provides exceptionally easy and convenient handling and melting compared to powder, block or briquette compounds. Consistent from one box to the next, the compound is plasticized for minimum odor and even load distribution.
Specifications
Density. 137 lbs./cu. ft. (2,186 kg/cu. m.).
Tensile Strength. 605 psi (4.2 x 105 kg/sq m.) after 48 hrs.
CompressiveStrength.
5,000 psi (3.6 x 106 kg/sq m.) minimum, after 2 hrs.
Melting Range. 230°-240°F (110°-115°C).
Optimum PouringRange.
260°-290°F (126°-143°C).
Weight. Net 50 lbs. (22.7 kg); Shpg. 52 lbs. (23.6 kg).
Ordering InformationEI34-6100. 50 lb. (22.7 kg) box.
ASTM C617 specifies that Capping Compound is tested to determine compressive strength using 2” cubes. For details of suitable molding equipment and special cover plate see 39-0412 and 39-0412/10 in the Cement Section.
Cylinder Capping SetASTM C-31, C-192, C-617;AASHTO T-231, T-126.
To obtain reliable and consistent test results, the ends of all concrete cylinders should be capped before testing. The set consists of a complete selection of equipment for capping 6” (152 mm) diameter by 12” (305 mm) long concrete specimens.
Set includes:
1 6” (152 mm) Cylinder Capper (34-6093).
1 4 qt. Warming Pot (34-6125/0x).
1 Capping Ladle (81-0701).
1 Box. Flake Capping Compound (34-6100).
1 Cylinder Carrier (34-5300).
EI3000/02. 110vAC, 50/60 Hz, 1ø. 1,250 Watts.
EI3000/01. 220vAC, 50/60 Hz, 1ø. 1,250 Watts.
Concrete Capping Pads and RetainersASTM C-1231;AASHTO T-22.
Time saving and odorless. Available in a variety of sizes.
Unbonded capping systems are available as an alternative method for use in compression testing of cylindrical concrete specimens. The system is faster, cleaner and odorless as opposed to bonded capping methods.
Specifications
Capping Pads. Tough elastometric material; 60 durometer pads may be used on any strength concrete; however, the longevity is lowered when used on cylinders in excess of 5,500 psi. 70 durometer pads should be used only on cylinders where concrete is 4,500 psi or higher.
Retainers. Machined, high alloy steel.
Weights. Pads: Net 8 oz. (227 g) ea.Retainers:4” (102 mm) Net 4 lbs. (1.8 kg) ea.6” (152 mm) Net 8 lbs. (3.6 kg) ea.
Ordering InformationEI34-6132. 4” (102 mm) Retaining Caps. Set of 2.
EI34-6132/10. 4” (102 mm) Compression Pads. 60 durometer, set of 2.
EI34-6132/12. 4” (102 mm) Compression Pads. 70 durometer, set of 2.
EI34-6134. 6” (152 mm) Retaining Caps. Set of 2.
EI34-6134/10. 6” (152 mm) Compression Pads. 60 durometer, set of 2.
EI34-6134/12. 6” (152 mm) Compression Pads. 70 durometer, set of 2.Capping Pads with Retainers can be used only on compression testers with a vertical daylight opening of 14-1/2” (368 mm) between platens.
Heavy-Duty Cylinder MoldsASTM C-39, C-192;AASHTO T-23, T-126.
Heavy-duty reusable steel design. Quick acting clamps for easy removal of specimen. Meet ASTM and AASHTO specifications. Plated for rust resistance and long life.
Heavy-Duty Cylinder Molds are made of steel and have a wall thickness of 1/4” (6.3 mm). Two quick acting clamps are welded to the mold along the longitudinal split. When the clips are released, the mold springs move apart slightly to facilitate removal of the specimen.
The molds are supplied complete with base plates, which can be easily attached by means of two stud and clip assemblies.
Specifications
BaseAttachment.
2 forged steel stud-and-clip assemblies welded to mold.
Mold Closure. 2 forged steel clamps welded to mold along longitudinal split.
Wall Thickness. 1/4” (6.3 mm).
BaseDimensions.
EI34-5280: 8” x 8” x 1/4” thick (203 x 203 x 6.3 mm). EI34-5282: 6” x 6” x 1/4” thick (152 x 152 x 6.3 mm).
OptimumPouring Range.
260°-290°F (126°-143°C).
Weight. Net 50 lbs. (22.7 kg); Shpg. 52 lbs. (23.6 kg).
Ordering InformationEI34-5280. For 6” x 12” (152 x 305 mm) samples.
EI34-5282. For 4” x 8” (102 x 203 mm) samples.
Plastic Cylinder MoldsASTM C-39, C-192, C-470;AASHTO M-205.
Molded single unit for consistent dimensionaluniformity.
Test cylinder molds are virtually non-absorptive. Molded polypropylene construction for quick and easy
stripping. Strong, durable and weather resistant – eliminates
jobsite storage problems. Optional plastic lids and stripping tool available.
Single use, Plastic Cylinder Molds are used to form standard, 4” x 8” and 6” x 12” concrete cylinders used in compression test applications. Formed in a single unit out of polypropylene, the molds meet all of the requirements outlined in ASTM and AASHTO standards.
Specifications
Construction. Single unit molded polypropylene.
InnerDimensions.
EI34-5292: 4” diam. x 8” h. (102 x 203 mm).EI34-5294: 6” diam. x 12” h. (152 x 305 mm).
Weights. EI34-5292: Net 13 lbs. (5.9 kg).EI34-5294: Net 15 lbs. (6.8 kg).
Ordering InformationLids not included; order separately.
EI34-5292. 4” x 8” (102 x 203 mm). Carton of 36.
EI34-5294. 6” x 12” (152 x 305 mm). Carton of 20.
AccessoriesEI34-5292/10. Plastic Lids for 4” (102 mm) diam. molds. Carton of 50.
EI34-5294/10. Plastic Lids for 6” (152 mm) diam. molds. Carton of 50.
EI34-5295. Stripping Tool.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
72
Concrete - Sample Preparation
For quotations and product pricing go to www.eleusa.com
73
Concrete - Sample Preparation
Cube Molds
Specifications
Construction. Bolted sides and clamped base plate.
Finish. Painted.
Ordering InformationEI34-4520. 100 mm Cube Mold.
EI34-4570. 150 mm Cube Mold.
Heavy-Duty Beam FormsASTM C-31, C-78, C-192;AASHTO T-23, T-97, T-126.
Designed for easy specimen removal. Heavy-duty steel construction, plated for rust
resistance.
Heavy-Duty Beam Forms are used to mold concrete specimens for flexure testing in accordance with ASTM and AASHTO specifications.
Ordering InformationEI34-5055. Net 66 lbs. (30 kg).
Plastic Beam FormASTM C-31, C-78, C-192, C-293.
Reusable, lightweight and inexpensive. Will not rust and easy to maintain.
The new, durable, lightweight Plastic Beam Form is used to mold concrete test beams. Simple thumb screws are utilized for ease of stripping, cleaning and assembly.
Specifications
Construction. Copolymer plastic.
Weights. 10 lbs. (4.53 kg).
Ordering InformationEI34-5065. For 6” x 6” x 21” (152 x 152 x 533 mm) samples.
Heavy-Duty Cylinder Carrier
Easy-to-use clamping action. Reduces technician fatigue and back stress.
The Heavy-Duty Cylinder Carrier is used as a handle for lifting 6” (152 mm) diameter concrete specimens. Designed to transport specimens, it is also used in removing specimens from the curing tank.
Specifications
Construction. Steel.
Weight. Net 3 lbs. (1.3 kg).
Ordering InformationEI34-5300.
Concrete Micrometer
Lightweight construction with hardened steel spindles. No-glare satin chrome sleeve and thimble finish. 5-1/2” to 6-1/2” range with 6” position at center
point on sleeve.
The Concrete Micrometer is used to measure the diameters of concrete cylinders and the dimensions of cubes. The Micrometer is designed specifically for concrete specimen measurements and has a range from 5-1/2” to 6-1/2”.
Specifications
Spindles. Copolymer plastic.
Thimble andSleeve.
Satin chrome finish with black markings.
Readability. 0.001”.
Range. 5-1/2” to 6-1/2”, 6” position at sleeves center.
Weight. Net 2 lbs. (0.9 kg).
Ordering InformationEI34-5305.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
74
Concrete - Non-destructive testing
For quotations and product pricing go to www.eleusa.com
75
Concrete - Non-destructive testing
Concrete Test HammerASTM C-805.
Accurate results to within approx. 15% on 1,250 to8,500 psi concrete.
Calibration curves plot the hammer rebound numberversuscompressive strength.
Lightweight and portable. Carrying case and instructions included.
The Concrete Test Hammer is used as a control and test instrument for measuring the quality and strength of in-place concrete. This quick and inexpensive instrument is not intended as a substitute for control testing of concrete cylinders.
The Concrete Test Hammer is valuable for use in the field for trouble-shooting to determine when test cores are needed and where they should be drilled.
Specifications
Body. Includes indicator scale, calibration curves.
CalibrationCurves.
Rebound number vs. compressive strength.compressive strength. strength.
Rubbing Stone. Prepares test surface.
Accuracy. Within 15%.
Carrying Case. Plastic.
Weight. Net 3 lbs. (1.4 kg).
Ordering InformationEI35-1475. With English Calibration Curves.
EI35-1480. With Metric Calibration Curves.
AccessoriesEI35-1530. Calibration Anvil.
Spare/Replacement PartsEI35-1475/10. Rubbing Stone.
Resonant Frequency TesterASTM C-215, C-666.
Conforms to ASTM C-215 and C-666 specifications. Accurate non-destructive method for Young’s Modulusof Elasticity, Modulus of Rigidity, Poisson’s Ratio andDamping Constant parameters.
Accepts specimen sizes up to 6” x 6” x 28” (150 x 150x 712 mm) long. Semi-automatic feature facilitates the fastidentification of resonance.
The principal used in the Resonant Frequency Tester is based upon the determination of the fundamental resonant frequency of vibration of a specimen by a driving oscillator, sensed by an accelerometer and then amplified on a meter.
The system has a semi-automatic feature that eliminates cumbersome manual scanning. Frequencies are automatically scanned in one of four ranges and the maximum amplitude is registered. The unit automatically stops scanning at the beginning of the band containing the resonant frequency.
Ordering InformationEI35-2480/09. 120-240vAC, 50/60 Hz, 1ø.
Crack Detection Microscope
Specifically designed for measuring crack widths. 4 mm measuring range. Includes pocket size carrying case.
Cracks can appear in a structure for a variety of reasons including frost action, sulfate expansion, natural shrinkage, expansion or movement and corrosion of reinforcement.
The Crack Detection Microscope is specifically designed to measure the crack width in concrete. This high definition microscope operates via a battery powered, adjustable light source.
Specifications
Magnification. X 35.
Measuring Range. 4 mm.
Divisions. 0.02 mm.
Dimensions. 1.5” x 3.5” x 6” (40 x 90 x 150 mm) in case.
Weight. Net 19.4 oz. (550 g).
Ordering InformationEI35-2505.
Calibrated Crack Monitor
Inexpensive, simple yet accurate device for monitoringcrack movement.Weather resistant, water proof design permits use insalt water.Hot-stamped crosshairs and grid.
The Calibrated Crack Monitor is a simple, accurate device for monitoring the movement of cracks and joints in concrete, brick, or cement block structures.
The Calibrated Crack Monitor consists of two acrylic plates. One plate is white with a black grid calibrated in millimeters, and the overlapping transparent plate has red crosshairs centered over the zero lines of the grid.
After installation, the tape which holds the plates together is cut, allowing the two plates to move independently of each other. Any vertical or horizontal movement of the crack or joint will cause the crosshair to change position on the grid. A chart is supplied with each gauge for periodic recording of movement. The position of the crosshairs is copied onto a grid facsimile on the chart.
Specifications
Construction. 10 Hz to 100 kHz in 4 switched ranges.
Discrimination. 0.5 mm.
Max. CrackWidthMovement.
3/4” (20 mm); longitudinal.
Max. UpwardMovement.
3/8” (10 mm); transverse.
Coeff. ofThermalExpansion.
3.80 x 10-5 in/in/°F. (6.84 x 10-5 mm/mm/°C).
Dimensions. Grid: 1-1/2” x 3/4” (40 x 20 mm).Plates: 1-1/4” x 4” x 1/4” (32 x 102 x 6.3 mm) ea.Overall: 1-1/4” x 5-3/4” x 1/4” (32 x 146 x 6.3 mm).
Weight. Net 2 oz. (57 g).
Ordering InformationEI35-2510. Includes crack progress chart.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
76
Concrete - Non-destructive testing
For quotations and product pricing go to www.eleusa.com
77
Concrete - Non-destructive testing
Windsor HP Probe SystemASTM C-803.
Approved for tests on both fresh and mature concrete. Can measure concrete strength up to 17,000 psi
(110 MPa). Supplied complete with new electronic measuring
device.
The new Windsor HP Probe System is designed to evaluate the compressive strength of concrete in-place. The test is non-destructive and can be used on fresh or mature concrete with equal effectiveness.
The system features a new electronic measuring device for enhanced accuracy and efficiency. Three individual tests can be automatically averaged and displayed on the LCD in compliance with ASTM procedures. The data together with time and date of the test can be stored in the memory for subsequent uploading to a PC.
The silver probes can be used for high performance concrete with a strength up to 17,000 psi (110 MPa).
Specifications
SystemComponents.
Drive unit, electronic measuring device, templates, measuring caps, gauge plates and carrying case.
Weight. Net 18 lbs. (8.5 kg).
Probes(Optional).
Silver Kit: For tests on concrete with strengths up to 17,000 psi (110 MPa). Probes are made of high strength alloy, heat treated and annealed to Rockwell C 48.
Probe and Power Loads; not included, order separately.
Ordering InformationEI35-1450.
Accessories
EI35-1530. Silver Probe Kit. Includes 3 probes and power loads. Sufficient for one test only.
ASR DetectTM
Alkali Silica Reaction (ASR) Kit
Complete test can be performed on-site. Minimal technician training and no special equipment
required. Uses only two, environmentally safe dyes. Identifies ASR in concrete and differentiates ASR from
other causes of degradation.
One of the primary causes of premature concrete deterioration is alkali-silica reaction (ASR). ASR causes concrete to deteriorate when sodium and/or potassium from cement attacks silica rich components of aggregate, producing gels that expand and eventually crack the structure.
In use, two reagents are applied to the broken surface of a concrete core and the excess rinsed off. On contaminated concrete, the resulting stains reveal the presence of ASR. The stains also reveal the extent of the ASR in the concrete and indicate the stage of ASR progress. A yellow color indicates that degradation has begun and a pink color warns that degradation is advancing.
Specifications
Components. One 60 ml bottle of yellow reagent, one 60 ml bottle of pink reagent, one 250 ml bottle of distilled water, two dispensing pipettes, protective gloves, goggles, apron and carrying case.
Ordering InformationEI35-2170.ASR Detect is a Trademark of Los Alamos National Laboratory.
Vapor Emission Test KitASTM E-1907, F-1869.
Pre-installed gasket system eliminates need to handlesticky tape material.
Unique O-ring design seals dome to concreteinstantly and installs quickly.
Instructions provide simple 1-2-3 step approach. Precision dome reduces variability. Specifically metered calcium chloride ensures
consistent measurement up to 20 pounds.
Designed for measurement of concrete moisture, the Vapor Emission Test Kit consists of the equipment needed to conduct the anhydrous calcium chloride test. This test works by a change in weight of moisture-absorbing anhydrous calcium chloride and represents the amount of moisture transmitting out of a large concrete surface area.
A scientifically engineered dome and a packet containing the proper type and amount of calcium chloride reduce variability in results. A pre-installed gasket ensures accuracy and easy installation. A gram weight scale with gradations to 1/10 of a gram is required.
Specifications
Absorbant. Anhydrous calcium chloride.
Dome. Clear plastic with butyl rubber gasket.butyl rubber gasket. rubber gasket.
Weight. Net 5 oz. (120 g).
Ordering InformationEI35-3968. Pack of 12.
Accessories
EI78-7140. Triple Beam Scale. 2610 g capacity.
See General Section (Scales/Balances) for specifications
Concrete Permeability Test System(Porouscope)
Measures both air and water permeability at the sametime.
Permeability measurements at the surface as well aswithin the concrete mass can be determined.
The porosity of sealants and surface mortars can bechecked.
Permeability, an important parameter in assessing concrete durability, can be accurately measured by this unique field test system.
In air permeability test applications, the system measures the time it takes for air to flow into a known volume of a sealed, evacuated chamber in the concrete, while reducing the vacuum.
For water permeability testing, the device uses the same chamber, filled with water and measures the total time in seconds for a volume of 0.01 ml of water to escape.
Through the use of the Surface Chamber Kit, the system can be used to measure the surface porosity of the concrete.
Specifications
Power Supply. Standard 9V battery.
Weight. 12 lbs. (5.4 kg).
Ordering InformationEI35-4050.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
78
Concrete - Non-destructive testing
For quotations and product pricing go to www.eleusa.com
79
Concrete - Air Content
Corrosion Mapping SystemASTM C-876.
Ideally suited for use on bridge decks, concrete piersand docks, highway slabs and parking garages.
Complete system packaged in a convenient carryingcase for easy transport to the field.
Half cell potential measurements serve as an important means of determining the probability of corrosion activity on the structure reinforcing steel. These measurements, which are related to the electrochemical nature of corrosion, allow an accurate survey to be performed in a short period of time.
Data from these surveys can be plotted to provide an easy to interpret graphic picture of the structure. From these plots, probable corrosion areas and the total area of the structure subject to corrosion can be determined.
The Corrosion Mapping System consists of all the necessary items required to perform this test in accordance with ASTM C-876 Testing Standard.
Specifications
Half-Cell Type. Drive unit, electronic measuring device, templates, measuring caps, gauge plates and carrying case.
Measurement Spacing. Net 18 lbs. (8.5 kg).
Memory Capacity. 15,866 half-cell readings; 128 max. scans.
Power Supply. Battery powered. Charger 90/250vAC, 50/60Hz, 1ø, AC (auto selectable).
Operating Temperature. 0 to 40°C.
Dimensions. 9.5” x 5.3” x 11” (240 x 135 x 280 mm).
Weight. Net 64 lbs. (29 kg).
Probe and Power Loads; not included, order separately.
Ordering InformationEI35-2165.
Chloride Field Test System
On-site results within 5 minutes. Low cost per sample compared to laboratory testing. Covers a range of 0.002% to 2% chloride by weight. Digital display for direct reading of lbs/cu. yd. and
percentage of chloride by weight.
The Chloride Field T`est System is designed for on-site testing of chloride content in concrete. The system measures the electrochemical reaction of a drilled powder sample of concrete in an extraction liquid. A direct, temperature compensated reading of the percent of chlorides is automatically displayed.
The system consists of a hand-held digital meter with combination electrode, 12 jars of extraction liquid, 5 jars of colored calibration liquid, electrode wetting agent and carrying case.
Specifications
Meter. Battery powered, high impedance electronic meter with temperature compensation circuits and microprocessor for direct conversion to percent of chloride.
Electrode. Chloride combination type with externally mounted temperature sensor, cable and connectors.
Components. 12 jars (20 ml each) of extraction liquid, 5 jars of colored calibration liquid, 1 jar of wetting agent, spray bottle, collection pan and blower, clamping pliers, drill bit and anchors, scales and carrying case.
Weight. Net 10 lbs. (5 kg).
Ordering InformationEI35-2167.
Precision Air Entrainment Meter Type BASTM C-231;AASHTO T-152.
Shock-proof pressure gauge mounting.Lightweight aluminum construction.Heavy-duty plastic carrying case for easy transport.
The Precision Air Entrainment Meter offers the ultimate in an instrument for use in the testing and designing of concrete mixes.
The container is rigid and has a capacity of exactly 0.250 cubic foot, thus providing an accurate device for the performance of unit weight testing. For convenience, the tare weight in grams is stamped on the bottom. The meter’s exclusive multi-range feature accurately measures entrained air up to 22%.
Specifications
Capacity. 1/4 cu. ft. (0.007 m3).
Readings. Up to 22% entrained air.
Accuracy. ±1/4% full scale.
Aggregate Size. 2” (50.8 mm) maximum.
Container. With tare weight stamped on bottom; 2-piece clamping device for positive seal.
Water. 4 oz. required.
Initial Pressure. Approximately 10 strokes needed.
Pressure Gauge. In shockproof mounting.
Tamping Rod. Aluminum; 12” (305 mm) long.
Dimensions. 9-3/4” diam. x 13-1/4” h. (248 x 337 mm).
Weight. Net 15 lbs. (6.8 kg).
Ordering InformationEI34-3265. Includes tamping rod, straight edge, syringe, nomograph and carrying case.
AccessoriesEI34-0132. Graduated Tamping Rod.
Replacement PartsEI34-3265/10. Pump Assembly.
EI34-3265/12. Gauge Kit.
Press-Ur-Meter Type AASTM C-231;AASHTO T-152.
Direct-reading 3-1/2” (89 mm) diameter gauge.Built-in hand pump with instant release valve.Quick-operating lid clamps.
The Press-Ur-Meter is a 1/4 cu. ft. (0.007 m3) air meter used to quickly determine the percentage of entrained air in fresh concrete.
The meter is supplied complete with tamping rod, syringe, calibration vessel, straight edge and carrying case.
Specifications
Capacity. 1/4 cu. ft. (0.007 m3).
Aggregate Size. 2” (50.8 mm) maximum.
Pump. Built-in.
Gauge. Direct-reading; 3-1/2” (89 mm) diam.
Clamps. Quick-operating.
Overall Height. 20-1/2” (521 mm).
Weight. Net 35 lbs. (16 kg).
Ordering InformationEI34-3267. Includes straight edge, syringe, calibration vessel, tamping rod and carrying case.
Accessories
EI34-3267/10. Calibration container.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
80
Concrete - Air Content
For quotations and product pricing go to www.eleusa.com
81
Concrete - Consistency and Workability
VolumetairASTM C-173.
Ultra lightweight — weighs one third the weightof brass units and half the weight of the aluminummodels.No threads to strip — uses expansion type plug top.Top and bottom of meter are held securely togetherby means of a stainless steel V-clamp.Leak-proof O-ring seal design.
The Volumetair is designed for use in the rolling method of measuring entrained air in any concrete. Ultra lightweight, accurate, and easy-to-use, the unit is supplied complete with the meter, funnel, syringe, tamper, calibration cup, mallet, strike-off bar and plastic carrying case.
The PVC and fiberglass construction not only makes the unit lightweight; it also allows the user to use water for clean-up or dipping in muratic acid for periodic cleaning.
Specifications
Sight Tube. 0 to 9%.
Base Volume. 134 cu.ft. (2,200 ml).
Diameter. 7.25” (184 mm) at middle.
Height. 24.25” (616 mm).
Weight. Net 6 lbs. (2.7 kg).
Ordering InformationEI34-3272.
Concrete Air Indicator KitAASHTO T-199.
Included with the Air Indicator is a cleaning brush and plastic squeeze bottle for the alcohol.
Ordering InformationEI34-3280.
Concrete Air IndicatorAASHTO T-199.
The ELE Air Indicator is easy to use. To operate, the small measuring cup is filled with the cement mortar. Placing the finger over the small end, fill with alcohol to the indicating line on the large end of the glass vial. Insert the cup at the large end. After agitation, the number of spaces on the scale that the liquid drops represents the percentage of air in one cubic foot of concrete mix.
Specifications
Test Fluid. Isopropyl alcohol.
Stopper. With integral measuring cup for concrete sample.
Vial. Glass; with indicating lines.
Dimensions. 1-1/8” diam. x 6-1/4” l. (159 x 28 mm).
Weight. Net 8 oz. (227 g).
Ordering InformationEI38-3280/10.
Portable Slump Test SetASTM C-143, C-192;AASHTO T-23, T-119, T-126.
Designed for easy transporting to the test site. Includes our graduated tamping rod for accurate
slump determinations.
The popular Portable Slump Test Set is preferred by many field technicians for its portability and ease in transporting to the test site.
Ordering InformationSet includes:
1 Metal Slump Cone (34-0108).
1 Slump Cone Base (34-0150).
1 Graduated Tamping Rod (34-0132).
EI3010E.
AccessoriesEI34-0180. Slump Cone Funnel.
Slump Test SetASTM C-143, C-192;AASHTO T-23, T-119, T-126.
Large cement pan provides greater surface area andease in cleanup.
Ideal set for educational training and inlaboratory use.
Includes cleaning brush and mixing trowel.
The Slump Test Set is designed for technicians who prefer to use the large cement pan during slump testing.
Ordering InformationSet includes:
1 Metal Slump Cone (34-0108).
1 Graduated Tamping Rod (34-0132).
1 Cement Pan (34-0152).
1 Cement Brush (39-0425).
1 Mixing Trowel (88-7400).
EI3020E.
AccessoriesEI34-0180. Slump Cone Funnel.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
82
Concrete - Consistency and Workability
For quotations and product pricing go to www.eleusa.com
83
Concrete - Consistency and Workability
Slump ConesASTM C-143, C-192;AASHTO T-23, T-119, T-126.
Available in either steel or plastic construction.Metal cones plated for rust resistance and long life. ELE Slump Cones feature a heavy-duty, spun steeldesign and are available in English and Metricdimensioned models.
ELE Slump Cones are available in either a heavy-duty, spun steel design or in lightweight plastic. Both versions are available in English and Metric dimensioned models.
Specifications
Construction. Metal Cones: Seamless, heavy-gage spun steel; 0.45” (1.1 mm) min. thickness.
Finish. Metal Cones: Plated for rust and corrosion resistance.
Dimensions. English: 4” top diam. x 8” bottom diam. (without foot pieces) x 12” h. Metric: 100 mm top diam. x 200 mm bottom diam. (without foot pieces) x 300 mm h.
Weights. Metal Cones: Net 4.7 lbs. (2.1 kg).
Ordering InformationEI34-0108. Metal Slump Cone. English.
EI34-0110. Metal Slump Cone. Metric.
AccessoriesEI34-0132. Graduated Tamping Rod.
EI34-0150. Slump Cone Base.
EI34-0152. Cement Pan.
EI34-0180. Slump Cone Funnel.
Slump Cone BaseASTM C-143, C-192;AASHTO T-23, T-119, T-126.
Heavy-duty cast aluminum construction.Designed for easy transport to the job-site.
The cast aluminum construction of the Slump Cone Base provides a hard and level working surface for slump testing on the job site. The octagonal base has cast-in cleats on the underside to help dig into the ground surface. Two clamps slide over the foot grips of a standard slump cone and hold it securely while filling and rodding.
Specifications
Construction. Cast aluminum with cast-in cleats on underside.
Clamps. Cast aluminum; swivel mounting.
Handle. Cast aluminum; swivel type.
Dimensions. 15” w. x 15” l. (381 x 381 mm) without handle.
Weight. Net 12 lbs. (5.4 kg).
Ordering InformationEI34-0150.
Tamping RodsASTM C-31, C-124, C-138, C-143, C-157, C-192, C-232,
C-234; AASHTO T-23,T-119,T-120,T-121,T-126,T-158, T159,T-160.
Tamping Rods are used with the Slump Cone, molds and other devices to eliminate air voids in fresh concrete.
Specifications
Dimensions. EI34-0132: 5/8” (16 mm) diam. x 24” (610 mm)long; with one hemispherical end.EI34-0134: 3/8” (10 mm) diam. x 12” (305 mm)long; with one hemispherical end.
Ordering InformationEI34-0132. 5/8” (16 mm) diameter. Graduated. 6” x 1/4”, starting from flat end.
EI34-0134. 3/8” (10 mm) diameter. Ungraduated.
Kelly Ball ApparatusCTM-533.
Particularly suited for on-site checks. Graduated handle for depth measurement. Stirrup to guide handle and serve as reference point.
The Kelly Ball Apparatus measures the workability of concrete by the depth of penetration test. This simple field test determines the depth to which the apparatus will sink under its own weight into fresh concrete. It is particularly suited to the quick checking of fresh concrete delivered to site in skips, wheelbarrows, etc.
The apparatus consists of a 30 lb. (14 kg) cylindrical weight, stirrup and a handle graduated in increments of 1/4” (6.35 mm).
Specifications
Construction. Solid machined steel; rust-resistant finish.
Handle. 5” x 1/4” graduations; threads into weight.
Weight. Net 35 lbs. (16 kg); Shpg. 40 lbs. (18 kg).
Ordering InformationEI34-0952.
K-Slump Tester
Simple and economical to use. Reduces testing time. No special calibration required. Plated for rust resistance and long life..
The K-Slump Tester was developed to determine the slump and workability of fresh concrete. The device can be used for in-place measurements and for measurements inside of test molds and forms. The device is used as an indicator to correlate to the standard slump test.
In operation, the K-Slump Tester is wetted and inserted into the concrete for 40 seconds. The K-Slump reading is then taken on the scale to the height that the concrete has penetrated the tester. The tester is then removed from the concrete vertically and the workability reading is taken on the scale as the height of concrete retained in the tester. After the readings, the unit is easily cleaned with water.
Specifications
Construction. Material: Nickel Plated Steel. Calibrated 3/4” (19mm) diam. hollow tube; pointed insertion end; round disc controls depth of penetration.
Openings. Two groups through which concrete enters.
Test Time. 60 seconds.
Weight. Net 1 lb. (445 g).
Ordering InformationEI34-0580.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
84
Concrete - Density and Unit Weight
6 For quotations and product pricing go to www.eleusa.com
85
Cement
ELE Buoyancy Balance (22 kg).
22 kg x 0.1 g capacity balance system. Quickly and accurately determines concrete density. Heavy-duty support frame construction.
The density of hardened concrete specimens such as cylinders and cubes can be quickly and accurately determined using the ELE Buoyancy Balance.
The system consists of a heavy-duty support frame, incorporating a water tank mounted on a platform. A mechanical lifting device is used to raise the water tank and immerse the specimen suspended below the balance system.
The electronic balance supplied with the system can also be used for standard weighing applications in the laboratory.
Specifications
Frame. Heavy-duty steel frame construction with mechanical lifting device and suspension hook.
Water Tank. 15” w. x 9.5” d. x 11” h. (380 x 240 x 280 mm).
Balance. Electronic; 22 kg capacity x 0.1 g.
Weight. Net 93 lbs. (42.1 kg).
Ordering InformationShown with optional Cradle; not included, order separately.
EI34-8100/02. 110-120vAC, 50/60 Hz, 1ø.
AccessoriesEI34-8105. Cradle. For supporting cube and cylinder specimens.
Unit Weight MeasuresASTM C-29.
Unit Weight Measures are designed in accordance with ASTM specifications.
Ordering InformationEI34-2850. 1/10 cu. ft. capacity.
EI34-2852. 1/3 cu. ft. capacity.
EI34-2854. 1/2 cu. ft. capacity.
EI34-2856. 1 cu. ft. capacity.
Yield BucketsASTM C-138;AASHTO T-121.
Yield Buckets are made of heavy-duty steel and are used for weight over volume determinations of concrete samples.
Ordering InformationEI34-2860. 1/10 cu. ft. capacity.
EI34-2862. 1/2 cu. ft. capacity.
86 Compression Tester87 Sample Preparation90 Fineness91 Setting Time93 Flow94 Soundness and Expansion
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
86
Cement - Compression Tester
For quotations and product pricing go to www.eleusa.com
87
Cement - Sample Preparation
ACCU-TEK™ Digital SeriesASTM C-109, C-39;AASHTO T-22.
Selectable display in English or Metric units. Automatic stress calculation and display.
Data storage and transfer capabilities for 500 tests. Optional platens for testing standard 2” (50.8mm) cubes,
frame stand, and download software with RS-232 cable.The ACCU-TEK™ Digital Series compression tester offers economical, affordable quality testing on-site or in the lab. Each tester consists of a heavy duty capacity load frame, hydraulic pump and digital readout system.
When calibrated to 60,000lbf capacity this machine is ideal for testing Cement Mortar and Grout samples. The optional 2” Cube Platen set enables Cement Mortar sample to be tested in accordance with ASTM C109.
The machine will also test 2” Capping Compound Cubes as specified in ASTM C617. For suitable molding equipment see EI39-0412 and EI39-0412/10.
Supplied complete with attachments to perform tests on 2” (50 mm) cube samples.
The complete system meets ASTM C-109, C-39 and AASHTO T-22 specifications covering the design and accuracy of hydraulic testing machines.
Specifications
Capacity. 60,000 lbf (267kN) or 250,000 lbf (1112kN).
Frame. Upper and lower steel plate sections with four steel uprights, threaded and welded into place; 14.75” w. x 12” d. x 37” h. (375 x 305 x 940 mm).
Ram. 6-1/8” (155 mm) diameter; 3” (76 mm) travel.
Upper Platen. Swivel seat type; 6-1/4” (159 mm) diameter.
Lower Platen. 7” (178 mm) diameter.
VerticalClearance.
12-1/2” (318 mm); or 14-1/2” (368 mm) with lower spacer removed.
HorizontalClearance.
9” (229 mm) between uprights.Pump. 1 h.p. (0.7kw) electro-hydraulic pump mounted within reservoir with overload protection.
Controls. Pump-mounted pressure compensated flow control valve with 4-position control lever and adjustable flow valve. Pump On/Off switch.
Display. Digital display with membrane keypad; pace deviation bargraph; automatic stress calculation; data storage for 500 tests; RS232C data output and printer ports.
Accuracy. Factory calibrated to within 0.5% of reading - from 1%to 100% of machine capacity.
Dimensions. 25.5” w. x 12” d. x 45” h. (648 x 305 x 1,143 mm).
Weight. Net 535 lbs. (243 kg).
Ordering InformationEI36-0650/02. 110vAC 60Hz 1ø.
EI36-0650/06. 220vAC 60Hz 1ø.
EI36-0650/01. 220vAC 50Hz 1ø.
AccessoriesEI37-5514. Platen set for 2” (50 mm) cubes.
Compression Testing of 2” Cubes Test SetASTM C-109.
The Compression Testing of 2” Cubes Test Set is designed for testing 2” cement cubes.
Ordering InformationEI36-0650/02. ACCU-TEK Compression Machine x 1
EI39-0412. Cement Cube Mold, 3-Unit x 2
EI39-0412/10. Cover Plate For Cement x 2
EI39-0420. Hard Rubber Tamper For x 1
EI88-6106. Beaker, Glass 250ml x 1
EI88-6010. Graduated Cylinder, 500ml x 1
EI88-7410. Trowel x 1
EI37-5514. Platen Set for 2” (50 mm) cubes
Mortar Mixer, 5 Qt. (4.73 Liter)ASTM C-305;AASHTO T-162.
5 qt. (4.73 liter) capacity.Three-speed selective transmission.
Stainless steel mixing bowl and beater for rust resistance and easy cleaning.Supplied complete with clearance adjustment bracket per ASTM requirements.
This special 5 quart (4.73 liter) Mortar Mixer is used for mixing cement pastes and mortars in accordance with ASTM and AASHTO specifications. The table mounted unit has a planetary mixing action so that the stainless steel beater reaches every part of the batch, rotating on its axis opposite to the direction in which it moves around the bowl. This gives a thorough blending and mixing of all of the ingredients resulting in a consistent and predictable result in the finished mix.
Specifications
Capacity. 5 qts. (0.167 ft, 4.73 liters).
Motor. 1/6 h.p.; 124 Watts.
Speeds. Low, intermediate, and high; 139, 285 and 591 rpm.
Mixing. Planetary action.
Bowl. Stainless steel; with clearance adjustment bracket.
Beater. Flat-type; stainless steel.
Dimensions. 10-3/8” x 12-1/4” x 17” h. (263 x 311 x 432 mm).
Weight. Net 37 lbs. (16.8 kg); Shpg. 55 lbs. (25 kg).
Ordering InformationEI39-0075/02. 115vAC, 60 Hz, 1ø.
Replacement PartsEI39-0075/10. Stainless Steel Bowl.
EI39-0075/12. Stainless Steel Beater.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
88
Cement - Sample Preparation
For quotations and product pricing go to www.eleusa.com
89
Cement - Sample Preparation
Cement Cube Mold (ASTM)ASTM C-87, C-109, C-141, C-579, C-593;AASHTO T-106.
Manufactured in strict conformance to ASTM andAASHTO specifications.Three-gang design for multiple sample preparation.Wide flange design for mold stability.Precision machined forged bronze construction.
Designed and manufactured in strict conformance to ASTM standards, the Cement Cube Mold is used to form 2” (50.8 mm) cube samples.
The main feature in the design is the wide flange construction of the top and base, which simplifies the striking off of excess amounts of cement when the cubes are being prepared.
Another important feature is the use of mechanical screw clamps to connect the two halves of the mold so they can be drawn tightly together.
Specifications
Sample Size. Up to three 2” (50.8 mm) cubes.
Construction. Forged bronze; three-gang with wide-flanged top and base; machined and ground finish.
Mold Closure. Mechanical; “T” bolt screw clamps held in place by snap rings.
Base Plate. Machined forged bronze with knurled hold-down screws.
Weight. Net 12 lbs. (5.4 kg).
Ordering InformationEI39-0412.
AccessoriesEI39-0412/10. Cover Plate, used with 39-0412 Mould to prepare 2” cubes to determine strength of Capping Compound in accordance with ASTM C617.
EI39-0420. Hard Rubber Tamper. 1/2” x 1” x 6” l. (12.7 x 25.4 x 152.4 mm).
2” (50.8 mm) Cube Test System
Complete, low cost system for making and testing 2”(50.8 mm) cubes.Removable polypropylene water tight disposableliners.No cleaning of mold required, just insert new liner.Reproducible, accurate results.
The 2” (50mm) Cube Test System consists of a brass three gang mold with liners for specimen preparation and a new unbonded capping system for use during compression testing.
Compression testing of the specimens is performed using the provided capping system. Testing without the use of the cap system will result in erroneous low compressive strengths.
Specifications
Mold Frame. Brass; three gang.
Liners. Water tight polypropylene with tabs.
Tamping Rod. Polypropylene.
Retainer Caps. Stainless steel.
Compression Pads. Polyurethane; 1/4” (6.3 mm) thick.
Weight. Net 7 lbs. (3.2 kg).
Ordering InformationEI39-0414. Includes stainless steel three gang mold, 27 liners, tamping rod, 2 retainer caps, 4 compression pads and utility knife.
Replacement PartsEI39-0414/10. Plastic Disposable Liners. Box of 198.
EI39-0414/12. Compression Pads. Set of 4.Testing without the use of the “unbonded” cap system will result in erroneous low compressive strengths.
Cement Cube Mold (Economy)
Economical three-gang design.Manufactured from corrosion-resistant materials.Includes top and compaction tamper.
The Economy Cube Mold is designed to form 2” (50.8 mm) cube samples for compressive strength testing. The mold is supplied complete with a top and compaction tamper.
Specifications
Construction. Ultra-high density molecular weight polyethylene; three gang; up to three 2” (50.8 mm) samples.
Top. Polyethylene with plastic guide rails.
Tamper. Polyethylene.
Weight. Net 2 lbs. (0.9 kg).
Ordering InformationEI39-0416.
Hard Rubber TamperASTM C-109, C-157, C-185, C-227, C-243; AASHTO T-71, T-106, T-137.
Meets ASTM and AASHTO specifications.Hard rubber design prevents damage to mold duringcompaction.
The Hard Rubber Tamper is used for preparing mortar specimens for compressive strength testing. The tamper’s cross section is approximately 0.5” by 1” and is 6” long.
Specifications
Construction. Hard rubber.
Dimensions. 1/2” x 1” x 6” (12.7 x 25.4 x 152 mm) l.
Weight. Net 4 oz. (113 g).
Ordering InformationEI39-0420.
Cement Mold Brush
Brass bristles prevent damage to molds.Tapered wooden handle.
The Cement Mold Brush is ideally suited for cleaning cement from molds, slump cones and other devices after use.
Specifications
Handle. Wooden.
Bristles. Stiff brass wire; 5/8” w. x 5” l. (15.8 x 127 mm).
Overall Length. 10” (254 mm).
Weight. Net 8 oz. (227 g).
Ordering InformationEI39-0425.
Test Sand (#20-30)ASTM C-91, C-185, C-359, C-778;AASHTO T-132.
Standardizes mortar for tensile strength testing. Specially graded to meet industry standards. Supplied in 50 lb. (22.6 kg) heavy-duty bags.
Supplied in 50 lb. (22.6 kg) bags, this sand is specially graded to pass a No. 20 sieve and be retained on a No. 30 sieve within the tolerances specified by ASTM and AASHTO standards.
Specifications
Specific Gravity. 2.65.
Bulk Density. 97.14 PCF (1.556 gm/cc).
Grading. Passes No. 20 sieve; retained on No. 30 sieve.
Weight. Net 50 lbs. (22.6 kg).
Ordering InformationEI39-0430.
Cube Test SandASTM C-109, C-349, C-359, C-379, C-778;AASHTO T-106.
Specially graded to meet industry standards. Supplied in 50 lb. (22.6 kg) heavy-duty bags.
This specially graded sand is used in the preparation of mortar for strength testing.
Specifications
SpecificGravity.
2.65.
Bulk Density. 93.45 PCF (1.497 gm/cc).
Grading. No. 16 sieve retains 0%. No. 30 sieve retains 2%.No. 40 sieve retains 30%. No. 50 sieve retains 75%.No. 100 sieve retains 98%.
Weight. Net 50 lbs. (22.6 kg).
Ordering InformationEI39-0435.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
90
Cement - Fineness
For quotations and product pricing go to www.eleusa.com
91
Cement - Setting Time
Blaine Fineness ApparatusASTM C-204;AASHTO T-153.
The Blaine Fineness Apparatus is used in measuring the fineness of Portland cement in accordance with ASTM and AASHTO standards. The fineness is measured in terms of the specific area of cement expressed as total surface area in square centimeters per gram.
The apparatus consists of a U-tube glass manometer, a ground joint with stainless steel test cell, a stop cock and a rubber bulb.
Specifications
Cell. Stainless steel; 12.70 ±0.10 mm i.d.
Disk. 0.9 ±0.1 mm thick with 30-40 one mm diam. holes.
Plunger. Stainless steel.
Manometer. U-tube glass with ground joint, stop cock and rubber bulb assembly.
Filter Paper. 12.70 mm diam.
Fluid. Pure Mineral Oil.
Weight. Net 6 lbs. (2.8 kg).
Ordering InformationEI38-1000.
AccessoriesEI38-0640. Standard Reference Material. For calibration of EI38-1000.
Replacement PartsEI38-0652. Filter Paper. 12.70 mm diam. Box of 500.
EI38-1000/10. Manometer U-Tube.
EI38-1000/15. Blaine Air Permeability Cell. Stainless Steel with Disc and Plunger.
EI38-0620. Pure Mineral Oil, 1 litre bottle.
Le Chatelier FlaskASTM C-128; C-188, E-694;AASHTO T-133.
High quality, chemical-resistant glass construction.Graduation markings in accordance with industrystandards.
The Le Chatelier Specific Gravity Flask is used for determining the apparent specific gravity of sand, stone, hydraulic cement and slag screenings.
Designed in accordance with industry standards, the flask is supplied complete with a glass stopper.
Specifications
Graduations. Zero mark represents 250 ml, the capacity of the large bulb; neck graduations from 0-1 ml in 0.1 ml divisions with two extra 0.1ml graduations above the 1.0 and below the 0 marks; bulb portion of neck holds 17 ml; top portion of neck graduated from 18-24ml in 0.1 ml divisions; 24 ml capacity.
Stopper. Ground glass.
Weight. Net 8 oz. (227 g).
Ordering InformationEI38-1200.
Vicat ApparatusASTM C-91, C-187, C-191;AASHTO T-129, T-131.
Rigid frame construction for accurate readings.Reversible plunger with removable needle.Includes needle and hard rubber mold.
The Vicat Apparatus is designed for determining the normal consistency, standard consistency and time of setting of cement and lime in accordance with ASTM and AASHTO specifications.
The apparatus consists of a frame bearing a movable plunger of 300 grams weight. The Plunger is 10 mm diameter at one end and is fitted with a removable 1 mm diameter needle at the other end. The plunger is reversible and carries an indicator which moves over the scale graduated in millimeters.
The apparatus is supplied complete with plunger, needle and hard rubber mold.
Specifications
Plunger. Reversible; 10 mm diam. at one end and 1 mm diam. needle at other end; combined weight 300 grams.
Needle. Steel; mounted in plunger; 1 mm diam. x 50 mm long.
Scale. Graduated in millimeters.
Mold. Hard rubber; 70 mm base diam. x 60 mm top diam. x 40 mm h.
Weight. Net 4 lbs. (1.8 kg).
Ordering InformationEI38-2012. Includes Vicat needle and mold.
Replacement PartsEI38-2620. ASTM Vicat Needle.
EI38-2660. ASTM Vicat Mold and Glass Plate.
Cement Setting Time Test SetASTM C-91, C-187, C-191;AASHTO T-129, T-131.
The Cement Setting Time Test Set is a basic set for testing the setting time of cement test specimens.
Ordering InformationSet includes:
1 Vicat Apparatus, Complete (38-2012).1 Harvard Trip Balance (78-7090).1 2100 g. Weight Set (78-7110).1 Scoop and Counter Weight (78-7130).
EI3806E.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
92
Cement - Setting Time
For quotations and product pricing go to www.eleusa.com
93
Cement - Setting Time and Flow
Acme Laboratory PenetrometerASTM C-403;AASHTO T-197.
Hydraulically operated with 200 lbf. (890 N) capacitygauge.Can be used in either the laboratory or field.Includes six stainless steel proctor needles.
The ASTM penetrometer resistance test of concrete is a procedure used to measure the rate of hardening of mortars sieved from concrete mixtures. The test is used to determine the effects of variables such as temperature, cement, mix design, additions and ad-mixtures upon hardening characteristics of concrete.
The Acme Laboratory Penetrometer is designed for highly accurate laboratory or field studies. This hydraulically operated apparatus is designed to develop uniformity in complete time-rate-penetration resistance studies of concrete mortar. The unit is supplied complete with six penetration needles.
Specifications
Capacity. 200 lbf. (890 N).
Operation. Hydraulic.
Needles. 6 included; 1/40, 1/20, 1/10, 1/4, 1/2 and 1 sq. in. end areas; stored in wooden block holder.
Weight. Shpg. 60 lbs. (27 kg).
Ordering InformationEI38-2670. Includes one package of data sheets.
Proctor & Mortar Penetrometer SetASTM D-1558, C-403.
130 lb. capacity with 1 lb. subdivisions.Includes 10 interchangeable needles as specified inASTM testing standards for Soils and Mortar.Plated for rust resistance and long life.Convenient carrying case with individualcompartments.
The Proctor Penetrometer is used for determining the penetration resistance of fine-grained soils and when selecting the appropriate needles becomes a Mortar Penetrometer set that is used for determining the rate of hardening of mortars sieved from concrete mixtures. The unit consists of a special calibrated spring dynamometer with a pressure-indicating scale on the stem of the handle. The pressure scale is calibrated to 130 lbs. by 1 lb. subdivisions. There is a major division located at each 10 lb. interval. A sliding ring on the stem indicates the maximum load obtained during the test.
Specifications
Penetrometer. Calibrated spring dynamometer.
Pressure Scale. 130 lbs. x 10 lbs. and 1 lb. subdivisions.
Test Reading. Indicated by sliding ring.
Needles. Includes: 1, 3/4, 1/2, 1/3, 1/4, 1/5, 1/10 1/20 1/30and 1/40sq. in. end area needles.
Carrying Case. Plastic with shelf; 18” w. x 6” d. x 4-3/4” h. (457 x 152 x 121 mm).
Weight. Net 7lbs. (3.2kg).
Ordering InformationEI29-3935. Includes penetrometer, ten needles and carrying case.
Concrete Mortar Penetrometer
Direct-reading scale from 0 to 700 psi.Indicator sleeve holds reading until released.Lightweight, pocket-size design.Includes convenient belt-loop style, canvas carryingcase.
The Concrete Mortar Penetrometer is used for field and laboratory evaluations of the initial set of concrete mortars.
The test involves forcing the penetrometer’s shaft into the mortar to a depth of 1” (25.4 mm) at constant rate and time intervals. The resistance in psi is shown on the penetrometer’s direct-reading scale.
Specifications
Shaft Needle. Steel; 1/20 sq. in. surface area.
Range. 0 to 700 psi.
Scale. Direct-reading; indicator sleeve holds reading until released.
Dimensions. 3/4” (19 mm) diam. x 7” (178 mm) long.
Carrying Case. Canvas, with belt-loop.
Weight. Net 8 oz. (227 g).
Ordering InformationEI38-2695.
10” (254 mm) Flow TableASTM C-87, C-109, C-185, C-230, C-243, C-348; AASHTO T-71, T-106, T-137.
Cast-bronze table for corrosion resistance and long life.Heavy-duty frame construction.Supplied complete with bronze flow mold.
The Flow Table is designed in accordance with ASTM and AASHTO specifications for use in determining the flow of hydraulic cement mortars and cement pastes.
In operation the test specimen is molded on the table to a specified volume and shape. With the mold removed, the table is dropped a specified number of times. Upon completion of test, the flow, (or increase in average diameter) is measured.
Specifications
Table. Cast-bronze; 10” (254 mm) diam.; combined weight with shaft, 9 lbs. ±0.1 lb. (4.1 ±0.05 kg).
Frame. Heavy-duty construction with cam; produces a 1/2” (12.7 mm) table drop.
Overall Dimensions. 10” (254 mm) diam. x approx. 10” (254 mm) h.
Flow Mold. Machined bronze; 2-3/4” (69.8 mm) top i.d. x 4” (101.6 mm) base i.d. x 2” (50.8 mm) h.
Weights. Net 22 lbs. (10 kg).
Ordering InformationIncludes Flow Mold.
EI38-6002. Hand-operated.
AccessoriesEI38-6080. Flow Caliper.
Replacement PartsEI38-6040. Flow Mold.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
94
Cement - Soundness and Expansion
For quotations and product pricing go to www.eleusa.com
95
Aggregates
Test Bar MoldsASTM C-141, C-151, C-157, C-227, C-490, C-531;AASHTO T-107.
Forms 10” (254 mm) gauge length specimens.Available in a variety of types and sizes.Plated for rust resistance and long life.
Test Bar Molds are designed to form specimens in accordance with ASTM and AASHTO specifications, for use in the Cement Autoclave.
Specifications
Construction. Plated steel.
Gauge Length. 10” (254 mm) between inner ends of embedded contact points.
Weights. EI34-8544: Net 20 lbs. (9.1 kg).EI34-8545: Net 22 lbs. (10 kg).
Ordering InformationEI34-8544. Two-Gang Mold. 1” x 1” x 10” (25.4 x 25.4 x 254 mm) gauge length.
EI34-8545. Single Mold. 4” x 4” x 10” (101.6 x 101.6 x 254 mm) gauge length.
AccessoriesEI34-8548. Contact Points-1/4”(6.3mm) diam. x 3/4”(19mm) long. Pack of 100.
LengthComparatorASTM C-151, C-157, C-227, C-490, C-531;AASHTO T-107, T-160.
Double-post frameconstruction forstability.Sturdy metalbase platform.Precisionmachined Invarsteel referencebar.Available ineither Englishor Metricmodels.
The Length Comparator is a device used for measuring the length changes of cement paste, mortar and concrete specimens, in accordance with ASTM and AASHTO specifications.
The precision unit consists of a sensitive dial indicator mounted on a sturdy, dual post construction frame. The movable and stationary anvils are shaped to receive the reference pins which are cast into the ends of the test specimen bars.
The Length Comparator is supplied complete with an Invar steel reference bar.
Specifications
Frame. Metal, double-post construction; rust resistant finish.
Anvils. One movable and one stationary; shaped to receive contact points in sample bars.
Dial Indicator. English: 0.3000” x 0.0001” divisions (EI34-8504).
Metric: 8.000 mm x 0.002 mm divisions (EI34-8505).
Digital: English or Metric (EI88-4210).
ReferenceBar.
Invar metal.
Dimensions. 7-1/2” w. x 7-3/4” d. x 17-3/4” h. (190 x 197 x 451 mm).
Weight. Net 13 lb (5.9 kg)
Ordering InformationDigital model shown.
EI34-8504. English.
EI34-8505. Metric.
EI88-4210. Digital Indicator.
96 Density and Specific Gravity98 Elongation and Chemical Tests99 Abrasion Resistance100 Rock Mechanics
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
96
Aggregates - Density and Specific Gravity
For quotations and product pricing go to www.eleusa.com
97
Aggregates - Density and Specific Gravity
ELE Buoyancy Balance (8,000 g)ASTM C-127;AASHTO T-85.
The ELE 8,000 gram capacity Buoyancy Balance system is designed for use in determining the particle density (specific gravity) of aggregates between 63 mm and 5 mm.
The system consists of a heavy-duty support frame that incorporates a water tank mounted on a platform. A mechanical lifting device is used to raise the water tank and immerse the specimen suspended below the balance.
Specifications
Capacity. 8,000 g.
Construction. Heavy-duty support frame with water tank and mechanical lifting device. A suspension hook is included.
Balance. Electronic; 6,000 g capacity x 0.1 g.
Weight. Net 92 lbs. (41.7 kg).
Ordering InformationShown with Density Basket; not included, order separately.
EI42-1000/02. 110-120vAC, 50/60 Hz, 1ø.
AccessoriesEI42-1003. Density Basket. ASTM C-127;AASHTO T-85. 8” diam. x 8” high, #8 stainless steel mesh.
Density of Coarse Aggregates Test SetASTM C-127;AASHTO T-85.
Ordering InformationSet Includes:1 Buoyancy Balance, 8000 g (42-1000/02).1 ASTM C-127 Density Basket (42-1003).1 8” Brass Sieve #4 Mesh (79-5020).1 Pan, Galvanized (88-7150).
EI4204/02. 110vAC, 50/60Hz, 1ø.
Density BasketASTM C-127;AASHTO T-85.
The Density Basket is used as a container for aggregates being weighed in water.
Specifications
Construction. Reinforced No. 8 wire mesh.
Handle. Bail-type.
Dimensions. 8” diam. x 8” h. (203 x 203 mm).
Weight. Net 6 lbs. (2.7 kg).
Ordering InformationEI42-1003.
SandAbsorptionCone andTamperASTM C-128;AASHTO T-84.
Precision spunbrass mold.Steel tamperplated for rust resistance and long life.
The Sand Absorption Cone and Tamper are used for checking the surface moisture conditions of sand.
Specifications
Mold. Brass; 40 mm top diam. x 90 mm base diam. x 75 mm h.
Tamper. Steel; 1” diam. working face x 6-5/8” l. (25.4 x 168 mm); 12 oz.(340 g) weight.
Weight. Net 1 lb. (453 g).
Ordering InformationEI42-1725.EI42-1700. Sand Absorption Cone.EI42-1720. Sand Absorption Tamper.
Pycnometer Top and JarASTM C-128;AASHTO T-84.
Precision spun top, plated for rust resistance andlong life.
The Pycnometer Top and Jar assembly is used in the determination of specific gravity of sand or fine gravel.
Specifications
Jar. 1 quart (0.9 liter) capacity.
Top. Spun; 3/8” (9.5 mm) hole.
Gasket. Rubber; 2-1/4” (57.2 mm) i.d.; 2-7/8” (73 mm) o.d.
Weight. Net 1 lb. (453 g).
Ordering InformationEI24-2885.
Chapman FlaskASTM C-70;AASHTO T-142.
Heavy-duty design for stability.Easy-to-read graduation marks.
The Chapman Flask is used in accordance with standard methods of testing for approximate apparent specific gravity of fine aggregate, approximate percentage of voids in inundated fine aggregates and surface moisture in fine aggregates.
Specifications
Graduations. 200 ml between bulbs; 375 to 450 ml in 1ml divisions above second bulb.
Capacity. 450 ml.
Weight. Net 1 lb. (453 g).
Ordering InformationEI23-8104.
Unit Weight MeasuresASTM C-29.
Unit Weight Measures are designed in accordance with ASTM specifications for use in the determination of weight over volume of concrete and aggregate samples.
Specifications
Construction. Cast aluminum; machined inside; with handles.
Top Rim. Machined smooth; parallel with bottom.
Inner Dimensions. EI34-2850: 6” (152 mm) i.d. x 6.1” (154.9 mm) inside h.EI34-2852: 8” (203 mm) i.d. x 11.5”(292.1 mm) inside h.EI34-2854. 10” (254 mm) i.d. x 11”(279 mm) inside h.EI34-2856: 14” (355 mm) i.d. x 11.2”(284.4 mm) inside h.
Weights. EI34-2850: Net 6-1/2 lbs. (2.9 kg).EI34-2852: Net 15-1/4 lbs. (6.9 kg).EI34-2854: Net 19 lbs. (8.6 kg).EI34-2856: Net 26-1/2 lbs. (12 kg).
Ordering InformationEI34-2850. 1/10 cu. ft. capacity.EI34-2852. 1/3 cu. ft. capacity.EI34-2854. 1/2 cu. ft. capacity.EI34-2856. 1 cu. ft. capacity.
Yield BucketsASTM C-138;AASHTO T-121.
Yield Buckets are made of heavy-duty steel and are used for weight over volume determinations of concrete samples. Designed to withstand rough handling in the field, the buckets are water tight and incorporate a heavy-duty bail type handle.
Specifications
Construction. Heavy-duty steel; welded connecting edges; water tight.
Handle. Bail-type with welded lugs.
Dimensions. EI34-2860: 6” (152 mm) i.d. x 6.1” (154.9 mm) inside h.EI34-2862: 10” (254 mm) i.d. x 11”(279 mm) inside h.
Weights. EI34-2860: Net 6 lbs. (2.7 kg).EI34-2862: Net 20 lbs. (9.0 kg).
Ordering InformationEI34-2860. 1/10 cu. ft. capacity.EI34-2862. 1/2 cu. ft. capacity.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
98
Aggregates - Elongation and Chemical Tests
For quotations and product pricing go to www.eleusa.com
99
Aggregates - Abrasion Resistance
Proportional Caliper DeviceASTM D-4791.
In some construction applications, the use of flat or elongated particles of aggregates can interfere with consolidation and cause problems during placement.
The Proportional Caliper Device is used to determine the percentages of flat or elongated particles in coarse aggregates. It consists of a steel base plate with two fixed posts and a pivot mounted swing arm. The axis position can be changed to achieve the desired ratio of opening dimensions.
Specifications
Mold. Steel, plated for corrosion resistance.
Pivot Ratios. Stamped on plate. 2=1:2, 3=1:3, 4=1:4and 5=1:5
Weight. Net 7 lbs. (3.2 kg).
Ordering InformationEI42-0405.
Sodium Hydroxide SolutionASTM C-40;AASHTO T-21.
Pre-mixed working solution - ready to use.Prepared in accordance with ASTM and AASHTOspecifications.
Supplied in one pint bottles, this pre-mixed working solution is used in the organic impurities test method for cement mortar or concrete.
Specifications
Solution. 3% sodium hydroxide; 97% water; one pint plastic bottle.
Weight. Net 1-1/2 lbs. (0.6 kg).
Ordering InformationEI42-3050.
Organic Impurities TestASTM C-40;AASHTO T-21.
Meets ASTM and AASHTO specifications.Includes all items necessary to perform test.
The Organic Impurities Test is used to determine the presence of injurious organic compounds in sand to be used in cement mortar or concrete. The test serves as a warning that further tests of the sands are necessary before they are approved for use.
Ordering InformationEI42-3000A. Round graduated bottleEI42-3040. Color standard chartEI42-3050. Sodium hydroxide 3%
Color Standard ChartASTM C-40;AASHTO T-21.
The Color Standard Chart consists of five permanent glass color standards mounted on a pocket size plate.
Specifications
Color Standards. Five, on non-fading glass.
Dimensions. 3” w. x 2-7/8” d. x 4” h. (76 x 73 x 102 mm).
Weight. Net 4 oz. (113 g).
Ordering InformationEI42-3040.
Graduated Impurities Test BottleASTM C-40;AASHTO T-21.
Specifications
Construction. Glass; 16 oz. (473 ml) capacity; graduated.
Cap. Plastic; screw-on.
Weight. Net 4 oz. (113 g).
Ordering InformationEI42-3000A.
Los Angeles Abrasion MachineASTM C-131, C-535;AASHTO T-96.
Heavy steel cylinder and base frame.Safety Stop button.Full length opening with dust-proof cover plate.Adjustable shelf positions for ASTM/AASHTO and ENmethods.Includes steel tray for specimen unloading.
Designed to determine the resistance of aggregates to abrasion, the Los Angeles Abrasion Machine consists of a closed hollow cylindrical steel drum rotating around its horizontal axis on ball bearing units mounted on a sturdy base framework. The drum is driven at a speed of between 30-33 rpm via an enclosed drive system.
The controls located on the side are placed at a convenient height and consist of prominent Start and Stop buttons along with a subtracting revolution counter system. The steel tray for sample removal is located on the frame under the drum.
Specifications
Capacity. 5,000 g each of aggregate and charge.
Drum speed. 30-33 rpm.
Frame. Welded structural steel.
Counter. Adjustable; automatic shut-off; push-button reset and adjustment.
Controls Magnetic motor starter with overload protection and integral On-Off switches.
Dimensions 38.6” w. x 36.2” d. x 38.6” h. (980 x 920x 980 mm).
Weight. Net 882 lbs. (400 kg).
Ordering InformationAbrasion Charges required for operation; not included, order separately.
EI42-5305/02. 110-120vAC, 60 Hz, 1ø.
AccessoriesEI42-5300/10. Abrasion Charges, ASTM/AASHTO.
Aggregate Abrasion TestASTM C-131, C-535;AASHTO T-96.
The items listed below are required to carry out the test.
Ordering InformationEI42-5305/02. Los Angeles Abrasion Machine x 1EI42-5300/10. Abrasion Charges, ASTM x 1EI78-7600. Heavy-Duty Solution Balance x 1EI79-5000. 8” Brass Sieve 1/4” Mesh x 1EI79-5020. 8” Brass Sieve #4 Mesh x 1EI79-5060. 8” Brass Sieve #8 Mesh x 1EI79-5080. 8” Brass Sieve #12 Mesh x 1EI79-5400. 8” Brass Cover Less Ring x 1EI79-5410. 8” Brass Pan x 1EI79-5510. 8” Brass Sieve 3/8” Mesh x 1EI79-5530. 8” Brass Sieve 1/2” Mesh x 1EI79-5560. 8” Brass Sieve 3/4” Mesh x 1EI79-5610. 8” Brass Sieve 1 1/2” Mesh x 1EI79-6150. 12” Brass Cover x 1EI79-6160. 12” Brass Pan x 1EI79-6280. 12” Brass Sieve 1” Mesh x 1EI79-6330. 12” Brass Sieve 2” Mesh x 1EI79-6350. 12” Brass Sieve 2 1/2” Mesh x 1EI79-6360. 12” Brass Sieve 3” Mesh x 1EI88-0130/02. Portable Electric Bench Oven x 1
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
100
Aggregates - Rock Mechanics
For quotations and product pricing go to www.eleusa.com
101
Asphalt
Rock Classification Hammer
Lightweight and portable, with carrying case.Includes rubbing stone for surface preparation.
This lightweight and portable impact hammer is used for rock classification tests.
The hammer is similar to a device used for many years for strength classification tests of mass concrete. Cylindrical cores, usually NW size, are held in a horizontal position and the hammer mechanism impacted against the core to obtain rebound readings. A series of readings is taken along the length of the core to get the average rebound number.
Specifications
Plunger. Applies pressure for hammer rebound.
Body. Aluminum; with indicator scale.
Rubbing Stone. Prepares test surface.
Accuracy. Within 15%.
Weight. Net 3 lbs. (1.4 kg).
Ordering InformationShown with Rock Cradle; not included, order separately.
EI77-0470.
AccessoriesEI77-0480. NW Rock Cradle.
NW Rock Cradle
The Rock Cradle is used to hold cores in place during rock classification test procedures. The cradle incorporates a guide for positioning the hammer to allow for a series of readings along the length of the core.
Specifications
Construction. All metal; treated for rust resistance.
Core Size. NW size specimens.
Weight. Net 20 lbs. (9.1 kg).
Ordering InformationEI77-0480.
Digital Point Load TesterASTM D-5731.
The strength of rock can be quickly determined in the field on core or irregular lump samples by using the Digital Point Load Tester. The frame, loading jack and digital readout are supplied as an integral unit mounted on the base of the carrying case. Loading pressures up to 13,000 lbf. (55 kN) can be applied to specimens as large as 4” (101.6 mm) in diameter. A scale mounted on the frame provides specimen diameter information for use in point load index calculations.
Specifications
Capacity. 13,000 lbf. (55 kN).
Specimen Size. 4” (101.6 mm) maximum.
Load Range. 0-13,000 lbf. (55 kN) x 0.2 lbf. (0.001 kN).
Weight. Net 55 lbs. (25 kg).
Ordering InformationEI77-0115. Includes carrying case and safety goggles.
102 Marshall Stability107 Hveem Stability109 Pavement Testing110 Specific Gravity112 Extraction113 Penetration
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
102
Asphalt - Marshall Stability
For quotations and product pricing go to www.eleusa.com
103
Asphalt - Marshall Stability
Marshall Stability TesterAASHTO T-245.
Compact size takes up little counter space in the lab.Push-button operation controls movement of loadscrew. Indicator lights show when unit is running andwhen test limit or maximum travel is reached.Standard unit equipped with 6,000 lb. (27 kN)capacity proving ring.
The Marshall Stability Tester quickly and accurately measures the resistance to plastic flow of bituminous mixtures, in accordance with AASHTO T-245 testing standards.
With operator convenience in mind, the machine features push-button operation with indicator lights to show when the unit is in operation and when the platen has reached its limit or point of maximum travel.
Specifications
Frame Capacity. 10,000 lbf. (44.5 kN) maximum.
Proving Ring. 6,000 lbf. (27 kN) capacity.
Controls. Push-button up/down/stop with running and limit indicator lights.
Motor. 3/4 h.p., reversible.
Speed. 2” (50.8 mm) per minute.
Travel. 2.5” (64 mm) maximum.
Clearances. 10” (254 mm) between uprights, 7-1/2” (191mm) between platen and load piston.
Overall Dimensions. 14” w. x 23” d. x 40” h. (356 x 584 x 1,016 mm).
Housing. 14” w. x 23” d. x 11” h. (356 x 584 x 279 mm).
Weight. Net 185 lbs. (84 kg); Shpg. 200 lbs. (91 kg).
Ordering InformationEI45-6832/02. 110vAC, 60 Hz, 1ø.
AccessoriesEI45-6892. Asphalt Flow Indicator with Brake. English.
EI45-6894. Asphalt Flow Indicator with Brake. Metric.
EI45-6855. 4” (101 mm) Marshall Breaking Head.
EI78-0860. Proving Ring, 11,200 lbf. (50 kN) Capacity.
Basic 4” Marshall Stability Test Set withManual CompactionAASHTO T-245.
Ordering InformationSet includes:
1 Marshall Stability Tester (45-6832/02).
1 4” Breaking Head (45-6855).
1 Flow Indicator (45-6892).
1 Stability Compaction Hammer (45-6460).
1 Compaction Mold Holder (45-6414).
1 Compaction Pedestal (45-6416).
2 4” Compaction Molds (45-6310).
1 Asphalt Sample Ejector (45-6480).
1 4” Filter Paper Discs (45-6462).
1 Water Bath (45-6475/02).
EI5002/02. 110vAC, 60Hz, 1ø.
Marshall Stability Breaking HeadAASHTO T-245.
Manufactured to AASHTO standards.Bronze bearings for free sliding fit.Plated steel construction for easy cleaning and rustresistance.
The Marshall Stability Breaking Head is made of plated steel to AASHTO specifications. Bronze bearings in the upper part assure a free sliding fit on the steel posts. The plating achieves a smooth surface for easy cleaning.
Specifications
Design. Split-type.
Finish. Plated for easy cleaning and rust resistance.
Dimensions. 4” (101.6 mm) i.d.
Base. 6” (152.4 mm) diam.
Weight. Net 20 lbs. (9 kg).
Ordering InformationEI45-6855. 4” (101.6 mm) Marshall Breaking Head.
AccessoriesEI45-6892. Asphalt Flow Indicator with Brake. English.
EI45-6894. Asphalt Flow Indicator with Brake. Metric.
Asphalt Flow Indicator with Brake
Brake-type indicator retains peak reading untilreleased. Cast aluminum holder securely holds indicator inproper position. Available in either English or Metric models.
The Flow Indicator is designed to sit on the post of the stability mold during the Marshall test. A built-in brake on the indicator retains the peak reading of the needle. The cast aluminum holder securely holds the dial indicator in position during the test.
Specifications
Holder. Cast aluminum.
Dial Indicator. Special type with brake.
Range. EI45-6892: 1.00” x 0.01” divisions. EI45-6894: 25.4 mm x 0.254 mm divisions.
Weight. Net 8 oz. (227 g).
Odering InformationEI45-6892. English.
EI45-6894. Metric.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
104
Asphalt - Marshall Stability
For quotations and product pricing go to www.eleusa.com
105
Asphalt - Marshall Stability
Asphalt Sample Ejector
Fast sample extrusion from 4” (101 mm) asphaltcompaction molds.
6,000 lbf. (26.7 kN) capacity hand-operatedhydraulic jack.
Bench-top design for use in both the laboratory andthe field.All metal construction treated for rust resistance andlong life.
The Asphalt Sample Ejector is specifically designed to eject 4” (101 mm) diameter asphalt specimens from compaction molds. Springs incorporated in the unit provide fast ram retraction when the return valve is opened.
Specifications
Capacity. 4” (101.6 mm) l.
Pushing Force. 6,000 lbf. (26.7 kN).
Jack. Hydraulic; hand-operated; 7” (178 mm) stroke; spring return.
Construction. All metal; plated extrusion plates and piston discs; painted finish on housing and pump.
Dimensions. 10-3/8” w. x 8” d. x 23-3/8” h. (264 x 203 x 594 mm).
Weight. Net 51 lbs. (23 kg).
Ordering InformationEI45-6480.
Asphalt Compaction MoldAASHTO T-245.
Base and collar interchangeable at either end ofmold.Larger collar inner diameter for use as support duringsample ejection.
The Compaction Mold for preparation of stability test specimens consists of a base plate, forming mold and collar. The forming mold is machined from seamless steel tubing. Either end of the forming mold will fit the collar and the base. The collar has a larger inside diameter so that it can be used as a support in ejecting specimens.
Specifications
Construction. Machined seamless steel forming mold; base and collar.
Finish. Plated for rust resistance.
Dimensions. 4” (101.6 mm) i.d. x 3” (76.2 mm) internal h. with base.
Weights. Net 8 lbs. (3.6 kg).
Ordering InformationEI45-6310. 4” (101.6 mm) Asphalt Compaction Mold.
Filter Paper DiscsASTM D-1561;AASHTO T-245, T-246.
Filter Paper Discs are installed between the asphalt mixture and the mold to prevent sticking during the compaction process.
Specifications
Weight. Net 4 oz. (113g).
Ordering InformationEI45-6462. 10 cm (3.93”) diam. Pkg. of 100.
StabilityCompactionHammerAASHTO T-245.
Heavy-duty,cast aluminumhandle.Plated for rustresistance andlong life.
The Compaction Hammer is used to dynamically compact the bituminous specimen in the compaction mold.
Specifications
Tamping Face. 3-7/8” (98 mm) diam.
Hammer. 10 lb. (4.54 kg).
Drop. 18” (457 mm).
Construction. Machined steel; cast aluminum handle.
Weight. Net 17 lbs. (7.7 kg).
Ordering InformationEI45-6460.
Compaction Mold HolderAASHTO T-245.
Holds all sections of compaction mold together duringthe compaction process.Easily installed on the EI45-6416 CompactionPedestal.Cast aluminum construction for rust resistance.
The Mold Holder easily bolts to the top surface of the EI45-6416 Compaction Pedestal, securely holding the compaction mold during the Marshall compaction process.
Specifications
Construction. Lightweight cast aluminum.
Components. Upper and lower sections; tension springs.
Weight. Net 4 lbs. (1.8 kg).
Ordering InformationEI45-6414.
Compaction PedestalAASHTO T-245.
Laminated maple construction provides solid base forcompaction mold.Plated steel top plate and angle brackets for rustresistance.Optional Mold Holder to secure mold to pedestal.
The Compaction Pedestal is used with the Compaction Mold and Mold Holder during the compaction process. The unit consists of a laminated hardwood post capped with a steel plate. Angle brackets fastened to the base allow bolting to a concrete slab or floor.
Specifications
Top Plate. Plated steel; 12” x 12” x 1” thick (305 x 305 x 25.4 mm).
Base. Laminated hardwood.
Installation. 4 angle brackets for mounting to concrete slab.
Dimensions. 8” w. x 8” d. x 18” h. (203 x 203 x 457 mm).
Weight. Net 85 lbs. (38 kg).
Ordering InformationEI45-6416.
AccessoriesEI45-6414. Compaction Mold Holder.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
106
Asphalt - Marshall Stability
For quotations and product pricing go to www.eleusa.com
107
Asphalt - Hveem Stability
Circulating Water BathAASHTO T-245.
Built-in magnetic circulating system.Stainless steel interior.Includes bath cover.Meets ASTM and AASHTO requirements.
The Circulating Water Bath incorporates a thermostatically controlled heater system and a magnetic circulator. The circulator assures that the water temperature is consistent throughout the bath.
The bath is supplied complete with a shelf support that holds the specimen 2” (50.8 mm) above the bottom to ensure proper circulation around the samples.
Specifications
Capacity. Up to twelve 4” (101.6 mm) diam. Marshall specimens.
Heaters. Thermostatically controlled.
Circulator. Magnetic type.
Range. Ambient to 150°F (65.5°C); accurate to within +/- 1°F (+/- 1°C).
Construction. Insulated stainless steel tank with painted steel exterior.
Weight. Net 47 lbs. (21.4 kg).
Ordering InformationEI45-6471/02. 110vAC, 60 Hz, 1ø.
Economy Water Bath
Low cost, economy bath for basic heating uses.Grid type false bottom for specimen support.
This economical Water Bath can be used for heating specimens of bituminous materials for stability and other tests. The bath has a capacity of eight standard Marshall test specimens. The grid type false bottom permits water circulation beneath the test specimen.
Specifications
Control. Setting dial.
Capacity. 8 standard Marshall specimens.
False Bottom. Grid-type.
Finish. Baked enamel.
Weight. Net 30 lbs. (13.6 kg).
Ordering InformationEI45-6475/02. 115vAC, 50/60 Hz, 1ø. 1,320 Watts.
Hveem StabilometerASTM D-1560, D-2844;AASHTO T-190, T-246; CA-301, CA-366.
Precision pump assembly. Large pressure gauge with 1/4% accuracy. Aluminum-Magnesium shell assembly for lightweight
use and corrosion resistance. Adjustable stage supplied as standard. Includes two followers and accessories for use in
asphalt and soils testing per industry standards.
The Hveem Stabilometer is a triaxial testing device used to determine the stability of bituminous paving mixtures, soils and other plastic or semi-plastic materials.
The device was originally developed by the California Division of Highways to measure the combined effects of frequent traffic loads, repeated over a long period of time, on a given bituminous mix. Test results are used to determine the maximum amount of bituminous binder which can be used without causing instability.
The Stabilometer is designed to test 4” (101.6 mm) diameter specimens in accordance with ASTM Testing Standards D-1560 and D-2844;AASHTO tests T-190 and T-246; and California Test Methods 301 and 366.
Specifications
Specimen Size. 4” (101.6 mm) diam.
Gauge. 200 psi capacity; 1/4% accuracy.
Loading. Diaphragm/piston pump.
Shell. Aluminum-Magnesium; adjustable stage.
Pressure Fluid. 1 qt. hydraulic fluid (included).
Dial Indicator. 1.0” displacement x 0.001” divisions.
Followers. Two included; one 3.985” ± 0.005” diam. x 5-1/2”; one 3.95” ± 0.005” diam. x 5” h.
Weight. Net 50 lbs. (23 kg).
Ordering InformationEI45-7500. ASTM Type. Includes displacement dial indicator, diaphragm tester with polyurethane dummy specimen, two followers, rubber bulb, extra O-rings, 1 qt. of oil, wrench, assembly tool and instructions.
EI45-7505. California Type. Modified version with fixed stage, dual scale gauge (psi/kPa).
EI45-7510. Texas Type. Modified version with gauge shut-off valve.
AccessoriesEI45-7520. Hveem Diaphragm Replacement Tool. Used to replace diaphragms in Hveem stabilometer. Pre-stressing Type.
Replacement PartsEI45-7500/10. Hveem Test Block. Polyurethane dummy specimen.
EI45-7500/12. Diaphragms. Specially molded for use in Hveem Stabilometer. Shipped 14” (356 mm) long and can be used to make two replacement diaphragms.
EI88-4100. Dial Indicator. 1.0” x 0.001” divisions.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
108
Asphalt - Hveem Stability
For quotations and product pricing go to www.eleusa.com
109
Asphalt - Pavement Testing
Expansion Pressure DeviceASTM D-2844;AASHTO T-190; CA-301.
Stainless steel mold for corrosion resistance. Rust-resistant brass perforated plate assembly and
turntable. Available as complete set, or as individual
components.
The Expansion Pressure Device is especially made to test the swell and shrinkage of bituminous soils, untreated soil, soil-cement and aggregate.
The unit is supplied as one set including Expansion Pressure Frame with turntable and plate, Dial Indicator and Holder assembly, Calibration Device and Hveem Test Mold. The dial indicator has 0.0001 inch divisions. The spring steel bar of the cross beam is calibrated to read 0.0021 inch of vertical deflection for 8 pounds and 0.0084 inch of deflection for 32 pounds.
Specifications
Frame Stand. Includes adjustable turntable, height gauge and head
Height Gauge. Scribed; sliding.
Head. Adjustable, drilled; includes deflection bar and dial indicator adjustment screw.
Plate. Perforated brass; circular, with perpendicular stem.
Dial Indicator Holder. Triangular, drilled; with dial indicator support and 3 feet.
Dial Indicator. 0.2” (7.6 mm) range x 0.0001” (0.002 mm) divisions.
Mold. Hveem type; stainless steel; 4” diam. x 5” h. (101.6 x 127 mm).
Calibrating Device. Lever-type.
Overall Dimensions. 12” w. x 12” d. x 16” h. (305 x 305 x 406 mm).
Weight. Net 33-1/2 lbs. (15.2 kg).
Ordering InformationEI45-7580.
Replacement PartsEI45-7580/10. Expansion Pressure Frame with Turntable, Stem and Plate. Net Wt. 19 lbs. (8.6 kg).
EI45-7580/12. Dial Indicator and Holder Assembly. Net Wt. 1-1/2 lbs. (680 g).
EI45-7580/14. Lever Type Calibration Device. Net Wt. 10 lbs. (4.5 kg).
EI45-7505/10. Hveem Test Mold.
Benkelman BeamAASHTO T-256.
Lightweight aluminum construction for easy portabilityand use at any test location.
Unique telescopic design for quick set up and storageduring transport to the field.
Direct-reading dial indicators eliminate need for con-versions or calculations during measurements.
Dial indicator vibrator system for accurate pavementmeasurements.
The Benkelman Beam measures the deflection of a flexible pavement under moving wheel loads in accordance with AASHTO test T-256.
The unit is designed for maximum operator convenience and accuracy. The unit is made from lightweight aluminum and features a telescoping design to reduce weight and storage space. The direct-reading dial indicator eliminates the need for any conversion or field calculations and the vibrator system assures accurate pavement measurements.
Specifications
Main Body. 55” (1,397 mm) long, black finish aluminum.
Probe Beam. Aluminum, 8 ft. (2.4 m) long, telescopes into case for storage.
Probe Fulcrum. Ball pivot bearing, gives lever ratio of 2:1.
Vibrator System. Operating switch mounted on top of instrument section (requires 4 “D” size batteries).
Dial Indicators. Compensated for direct reading (not included).
Leveling Wheel. Adjusts beams to proper elevation.
Open Length. 12 ft. (3.7 m) l.
Weight. Net 35 lbs. (15.9 kg).
Ordering InformationDial Indicator not included; order separately.EI47-1460.
AccessoriesEI47-1460/12. Vertical Dial Indicator. 1” range x 0.002” divisions.
EI47-1460/14. Vertical Dial Indicator. 25 mm range x 0.02 mm divisions.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
110
Asphalt - Specific Gravity
For quotations and product pricing go to www.eleusa.com
111
Asphalt - Specific Gravity
Vacuum Pycnometer (6,000 Gram)ASTM D-2041 (Type F);AASHTO T-209, T-283.
Large capacity design to minimize segregation effects.Lightweight poly carbonate construction.Transparent top for visual observations.
The Vacuum Pycnometer is a large capacity unit designed for use in determining the maximum specific gravity of bituminous paving mixtures.
The Pycnometer has a total volume of approximately 10 liters and will conveniently handle samples of 6,000 grams to minimize segregation effects. The unit is constructed of lightweight poly carbonate, with the upper half being transparent for visual observations of the effects of the vacuum.
Specifications
Capacity. Approximately 10 liters; 6,000 g (13.2 lbs.) sample weight.
Construction. Lightweight poly carbonate with transparent upper half.
Gauge. 2” (50.8 mm) diam., 30” x 0.5” Hg.
Aspirator. Plastic; 3/8” pipe thread (included).
Connections. Water inlet valve; quick disconnect for vacuum gauge and hose.
Dimensions. 10-3/4” (273 mm) o.d. x 16” (406 mm) h.
Weight. Net 8 lbs. (3.6 kg).
Ordering InformationEI45-9300.
AccessoriesEI45-9301. Filtering Kit. Functions as water trap for vacuum pump.
EI45-9301/14. 1/4” O.D. Plastic tubing
Vacuum Pycnometer (2,000 Gram)ASTM D-2041 (Type E);AASHTO T-209, T-283.
Transparent lid for observation of sample.Supplied with volumetric lid and vacuum hose.Manufactured from strong, lightweight aluminum.
This smaller Vacuum Pycnometer is used in the Rice Test to determine the specific gravity of bituminous paving mixtures with maximum aggregate size up to 3/4” (19.1 mm). This 4.5 liter size will handle a 2,000 gram sample. The transparent lid on the pycnometer allows the operator to observe the bubble release from the asphalt sample during the test. A second volumetric lid, tapered with a capillary bore, is provided so the unit can be used as a volumeter for determining specific gravity of compacted bituminous mixtures. Vacuum is achieved by using the accessory aspirator or laboratory vacuum pump.
Specifications
Capacity. 2,000 g.
Construction. Aluminum.
Dimensions. 7.5” i.d. x 6” d. (190 x 15 mm).
Weight. Net 15 lbs. (6.8 kg).
Ordering InformationEI45-9310.
AccessoriesEI45-9311. Aspirator Type Filter Pump.
Specific Gravity (Rice) Test – Type EASTM D-2041 (Type E);AASHTO T-209, T-283.
Ordering InformationEI45-9310. Vacuum Pycnometer, 2000 g x 1
EI45-9311. Filter Pump, Aspirator Type x 1
EI45-9330. Residual Pressure manometer, non toxic x 1
EI88-6230. Plastic Filtering Flask, 500 ml x 1
EI45-9301. Filtering Kit x 1
EI88-1094/02. High Capacity Electronic Balance, 15 kg x 1
EI45-9315/02. Rice Test Vibrator x 1
Specific Gravity (Rice) Test – Type FASTM D-2041 (Type F);AASHTO T-209, T-283.
Ordering InformationEI45-9300. Vacuum Pycnometer, 6000 g x 1
EI45-9330. Residual Pressure manometer, non toxic x 1
EI45-9301. Filtering Kit x 1
EI 88-1094/02. High Capacity Electronic Balance; 15 kg x 1
EI88-3100/02. Standard Vacuum Pump x 1
EI45-9315/02. Rice Test Vibrator x 1
EI45-9315/12. 6000 g Pycnometer Attachment x 1
Digital Residual Pressure ManometerNon-toxicASTM EHS-9300
The digital residual pressure manometer is an accurate and non-toxic alternative to Mercury manometers used in the Rice test.
Ordering InformationEI45-9330.
Rice Test Vibrator
The Rice Test Vibrator is used with the EI45-9310, 2000g Vacuum Pycnometer. Adjustable clamps hold the pycnometer securely to the base during vibration. With accessories, the unit can be used on the 6,000g Vacuum Pycnometer.
Specifications
Motor. 1/20 h.p.; 3000 vpm; 1.6 amp.
Dimensions. 19-1/2” (495 mm) h.; 12” (30 mm) base diameter.
Weight. Net 12 lbs. (5.4 kg).
Ordering InformationEI45-9315/02. 115vAC, 50/60 Hz, 1ø.
EI45-9315/01. 220vAC, 50/60 Hz, 1ø.
EI 45-9315/14. Drierite desiccant 1lb.
AccessoriesEI45-9315/10. 6,000 Vacuum Pycnometer Attachment.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
112
Asphalt - Extraction
For quotations and product pricing go to www.eleusa.com
113
Asphalt - Penetration
Asphalt Centrifuge ExtractorsASTM D-2172;AASHTO T-164.
Available in 1,500 and 3,000 gram capacities.Corrosion-resistance aluminum construction.Centrifuge speed in 0-3,600 rpm range.Predrilled holes for mounting.Manual braking mechanism.
The Asphalt Centrifuge Extractor is used to determine bitumen percentage in asphalt paving mixtures by extracting bitumen, using specified solvents. Available in 1,500 and 3,000 gram capacities.
The housing, removable bowl, cover and nut are constructed of cast aluminum to resist corrosion. The cover is designed with latches for security during the test and with handles for easy lifting and carrying. Holes are pre drilled in the base for mounting to a workbench. A conveniently located dial controls the centrifuge speed in 0-3,600 rpm range. The operator can quickly stop centrifuge rotation with a manual braking mechanism. The unit is supplied with 10 filter discs.
Specifications
Control. Variable speed, 0-3,600 rpm; brake for fast stopping.
Motor. 1/6 h.p.
Cover. Aluminum; removable, with integral cup for adding solvent.
Housing. Aluminum; removable, sealed.
Bowl. Aluminum; removable.
Filter Discs. 10 included.
Dimensions. 1,500 g models: 17” w. x 17” d. x 18” h. (432 x 432 x 457 mm).3,000 g models: 18” w. x 18” d. x 19” h. (457 x 457 x 483 mm).
Weight. Net 70 lbs. (32 kg).
Ordering InformationEI45-3820/02. 1,500 g Centrifuge Extractor, 120vAC, 60 Hz, 1ø.
EI45-3825/02. 3,000 g Centrifuge Extractor, 120vAC, 60 Hz, 1ø.
AccessoriesEI45-3845. Biodegradable Solvent. 5 gal. can.
Replacement PartsEI45-3840. Filter Discs. For use on 1,500 g extractors, 10” (254 mm) diam. Pack of 100.
EI45-3842. Filter Discs. For use on 3,000 g extractors, 12-1/4” (311 mm) diam. Pack of 100.
Bitumen Extraction TestASTM D-2172;AASHTO T-164.
The Bitumen Extraction Test is designed for the extraction of bitumen from bituminous mixtures using Method A of ASTM D-2172.
Ordering InformationEI45-3820/02. Centrifuge Extractor x 1
EI88-0500/02. Hot Plate, 39 Square Inch Top x 1
EI88-6012. Graduated Cylinder, 1000 ml x 2
EI88-6700. Desiccator Cabinet x 1
EI88-6712. Evaporating Dish, 250 ml x 1
EI88-7150. Pan, Galvanized x 1
Asphalt PenetrometerASTM D-5;AASHTO T-49.
Large, easy-to-read penetration dial with 400 ml by0.1 mm divisions.
The Asphalt Penetrometer is used for measuring the consistency of bituminous samples.
Specifications
Dial Indicator. 6” 9150 mm) diam.; 400 mm x 0.1 mm.
Plunger Weight. 47.5 g.
Needle. ASTM Style (non-certified); one included.
Plunger Release. Manual mechanism.
Weights. Net 13.25 lbs. (6 kg).
Ordering InformationModel shown with sample container; not included, order separately.
EI46-5290. Standard Asphalt Penetrometer.
AccessoriesEI46-5297. ASTM Style (NIST Certified) Penetration Needle.
EI46-5800. Transfer Dish.
Replacement PartsEI46-5290/10. ASTM Style (Non-Certified) Penetration Needle.
Bitumen Penetration TestASTM D-5;AASHTO T-49.
The Bitumen Penetration Test is designed for penetration testing of bitumen specimens.
Ordering InformationEI46-5290. Asphalt Penetrometer x 1
EI46-5290/10. Penetration Needle x 3
EI46-5800. Asphalt Transfer Dish x 1
EI88-4340. Digital Stopwatch x 1
EI88-7022A. Tin Sample Box, 3 oz, Pack of 12 x 1
EI88-7026. Tin Sample Box, 6 oz, Pack of 12 x 1
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
114
Gradation
For quotations and product pricing go to www.eleusa.com
115
Gradation - Shakers
115 Shakers118 Sieves121 Sample Splitters
AggregateScreen Shakers
Screen size rangefrom 4” to No.200.
Grades bulksamples up to 1cu. ft. (0.03 m3)in minutes.
Independentlyremovable screentrays.
Accommodatesup to six screentrays withDustpan placed instationary positionin bottom of the cabinet
The Aggregate Screen Shaker is designed for sizing test samples of crushed stone, sand, gravel, slag, coal, ores, and other similar materials. The shaker will receive and grade up to 1 cu.ft. (0.03 m3) of bulk materials in one operation.
The unit is designed primarily for sizing in the range of 4” down to a #4 screen size, and with smaller amounts of finer materials down to a #200.
The standard series shaker utilizes a manually-operated, threaded clamping rod arrangement to hold the screen trays during operation. The other series features a hydraulic pump clamping system for quick clamping and release of trays in just a few motions.
Both versions are supplied complete with five coarse series screen trays and a dustpan tray.
Specifications
Capacity. 1 cu. ft. (0.03 m3).
Motor. Capacitor-type; 1/3 h.p. with overload protection.
Tray Dimensions. Screen Area: 14-3/4” x 22-3/4” (375 x 578 mm).Overall: 18” x 26” (457 x 660 mm).
Trays. Steel wire cloth; five included: 2”, 1-1/2”, 1”, 3/4”, 1/2” plus dustpan tray.
OverallDimensions.
23” w. x 31” d. x 43” h. (584 x 787 x 1,092 mm).
Weight. Shpg. 500 lbs. (227 kg).
Ordering InformationEI80-0405 series with hydraulic clamping system shown.
EI80-0400/02. With Manually-Operated Clamping. 115vAC, 60 Hz, 1ø.
EI80-0400/01. With Manually-Operated Clamping. 230vAC, 50 Hz, 1ø.
EI80-0405/02. With Hydraulically-Operated Clamping. 115vAC, 60 Hz, 1ø.
EI80-0405/01. With Hydraulically Operated Clamping. 230vAC, 50 Hz, 1ø.
TraySize ornumber
Mesh Opening Coarse SeriesSteel Wire Cloth
Model No.
Medium &Fine SeriesBrass Wire
ClothStandard
(mm)Alternative
(in.)
4” 100.00 4.000 EI80-0400/10 -3-1/2” 90.00 3.500 EI80-0400/12 -
3” 75.00 3.000 EI80-0400/14 -2-1/2” 63.00 2.500 EI80-0400/16 -
2” 50.00 2.000 EI80-0400/18* -1-3/4” 45.00 1.750 EI80-0400/20 -1-1/2” 38.10 1.500 EI80-0400/22* -1-1/4” 31.50 1.250 EI80-0400/24 -
1” 25.00 1.000 EI80-0400/26* -7/8” 22.40 0.875 EI80-0400/28 -3/4” 19.00 0.750 EI80-0400/30* -5/8” 16.00 0.625 EI80-0400/32 -1/2” 12.50 0.500 EI80-0400/34* -7/16” 11.20 0.438 EI80-0400/36 -3/8” 9.50 0.375 EI80-0400/38 -5/16” 8.00 0.312 EI80-0400/40 -1/4” 6.30 0.250 EI80-0400/42 -
#3-1/2 5.60 0.223 EI80-0400/44 -#4 4.75 0.187 EI80-0400/46 -#5 4.00 0.157 - EI80-0400/48
#6 3.35 0.132 - EI80-0400/50
#7 2.80 0.111 - EI80-0400/52#8 2.36 0.0937 - EI80-0400/54#10 2.00 0.0787 - EI80-0400/56#12 1.70 0.0661 - EI80-0400/58#14 1.40 0.0555 - EI80-0400/60#16 1.18 0.0469 - EI80-0400/62#18 1.00 0.0394 - EI80-0400/64#20 850 µm 0.0331 - EI80-0400/66#25 710 µm 0.0278 - EI80-0400/68#30 600 µm 0.0234 - EI80-0400/70#35 500 µm 0.0197 - EI80-0400/72#40 425 µm 0.0165 - EI80-0400/74#45 355 µm 0.0139 - EI80-0400/76#50 300 µm 0.0117 - EI80-0400/78#60 250 µm 0.0098 - EI80-0400/80#70 212 µm 0.0083 - EI80-0400/82#80 180 µm 0.0070 - EI80-0400/84
#100 150 µm 0.0059 - EI80-0400/86
#200 75 µm 0.0029 - EI80-0400/88
Dustpan Tray - EI80-0400/90
Trays with an asterisk are supplied with Aggregate Screen Shakers as standard. If different trays are desired, advise factory at time of order.
Gradation - Shakers
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
116
Gradation - Shakers
For quotations and product pricing go to www.eleusa.com
117
ELE RotasiftTM Laboratory Sifter
Quiet and highly efficient with rotational sifting andtapping action.
Sieves are simply laid in place with no clampingrequired.
Door safety switch prevents opening door while sifteris in operation.
Accepts 8” (203 mm) and 12” (305 mm) standard testsieves.
Built-in 30 minute timer.
The ELE RotasiftTM Laboratory Sifter is designed to accept up to ten 8” (203 mm) diameter by 2” (50.8 mm) high or six 12” (305 mm) by 3” (76.2 mm) high standard test sieves and cover.
In addition to all of the features found in competitive models, the ELE RotasiftTM incorporates an internal switch in the door for operator safety. This feature prevents the user from opening the unit while in operation.
Specifications
Capacity. Ten 8” (203 mm) or six 12” (305 mm) diameter sieves plus cover.
Timer. Built-in 30 minute.
Motor. 1/3 h.p.
Dimensions. 19.9” w. x 30.7” d. x 59” h. (505 x 780 x 1,500 mm). Width and depth dimensions are the base dimensions of the frame.
Weight. Net 175 lbs. (79.4 kg).
Ordering InformationEI80-0417/02. 110vAC, 60 Hz, 1ø.
Sieve Shakers
Ideally suited for either laboratory or field use. Inexpensive, yet efficient design for accurate
separation of materials. Accepts up to 7 full height, 8” (203 mm) diameter
sieves, plus pan and cover. Supplied complete with belt guard.
These Sieve Shakers utilize a horizontal and vertical motion along with a tapping action. Spring loaded tie rods allow vertical motion. The shaker imparts a tap to the sieves at each change in direction as the sieve holders move from side to side. In addition, during each tap an upward jolt takes place. Proper separation of all materials takes place with the tapping action, allowing the materials to move quickly through the sieve meshes. Sample testing time is greatly reduced. This combination of shaking actions assures an accurate sieving or grading test on large quantities of material. The shakers have a capacity of 7 U.S. Standard, 8” (203 mm) diameter sieves with pan and cover.
Specifications
Capacity. 7 sieves, 8” (203 mm) diam., plus pan and cover.
Guard. Steel construction; supplied as standard on motorized versions.
Motor. 1/4 h.p.; belt driven.
Dimensions. EI80-0445: 23” w. x 13” d. x 33” h. (584 x 330x 838 mm).
Weight. EI80-0445: Net 63 lbs. (28.6 kg).
Ordering InformationEI80-0445/02. Motorized. 110vAC, 60 Hz, 1ø.
EI80-0445/06. Motorized. 220vAC, 60 Hz, 1ø.
Ro-Tap® Sieve Shakers
Totally enclosed, vertically-mounted motor. Built-in 30 minute digital timer.
Ro-Tap® Sieve Shakers are designed to accurately reproduce the circular and tapping motion of hand-sieving, but with a uniform, mechanical action to assure dependable and comparable test results.
Specifications
Capacity. 6 full-height sieves, 8” (203 mm) diam., plus panand cover.
Motor. 1/4 h.p.
Timer. Built-in; 30 minute digital timer.
Support Plate. Adjustable.
Dimensions. 28” w. x 21” d. x 25” h. (711 x 533 x 635 mm).
Weights. Net 165 lbs. (75 kg); Shpg. 185 lbs. (84 kg).
Shown with sieves; not included, order separately.
Ordering InformationEI80-0420/02. For 8” (203 mm) Diam. Sieves. 110vAC, 60 Hz, 1ø.
EI80-0420/01. For 8” (203 mm) Diam. Sieves. 220vAC, 50 Hz, 1ø.
Gradation - Sieves
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
118
Gradation - Sieves
For quotations and product pricing go to www.eleusa.com
119
Sieve Analysis Test
Ordering InformationSieves are used for a wide range of tests on Construction Materials including Soils and Aggregates.
Particle size distribution enables material to be classified and it’s suitability the proposed design.
Grading of Aggregates is important in determining their compliance with the specification requirements and the control of aggregates used in various types of mixtures.
A typical set of sieves as specified in ASTM C136 would include 1 each of sieves highlighted in the Sieve table and the accessories listed.
EI79-7225. Fine Sieve Brush x 1.
EI79-7230. Wire Sieve Brush x 1.
U.S. Standard Testing Sieves Table
SieveSize or
NumberFine Series
Sieve Opening 8”(203 mm)Diameter
12”(305 mm)DiameterStandard (mm) Alternative (in.)
1/4” 6.3 mm 0.250 EI79-5000 EI79-5800No. 3-1/2 5.6 mm 0.223 EI79-5010 EI79-5810
No. 4 4.75 mm 0.187 EI79-5020* EI79-5820No. 5 4.00 mm 0.157 EI79-5030 EI79-5830No. 6 3.35 mm 0.132 EI79-5040 EI79-5840No. 7 2.36 mm 0.0937 EI79-5060 EI79-5860No. 8 2.36 mm 0.0937 EI79-5060* EI79-5860No. 10 2.00 mm 0.0787 EI79-5070 EI79-5870No. 12 1.70 mm 0.0661 EI79-5080 EI79-5880No. 14 1.40 mm 0.0555 EI79-5090 EI79-5890No. 16 1.18 mm 0.0469 EI79-5100* EI79-5900No. 18 1.00 mm 0.0394 EI79-5110 EI79-5910No. 20 850 µm 0.331 EI79-5120 EI79-5920No. 25 710 µm 0.0278 EI79-5130 EI79-5930No. 30 600 µm 0.0234 EI79-5140* EI79-5940No. 35 500 µm 0.0197 EI79-5150 EI79-5950No. 40 425 µm 0.0165 EI79-5160 EI79-5960No. 45 355 µm 0.0139 EI79-5170 EI79-5970No. 50 300 µm 0.0117 EI79-5180* EI79-5980No. 60 250 µm 0.0098 EI79-5190 EI79-5990No. 70 212 µm 0.0083 EI79-5200 EI79-6000No. 80 180 µm 0.0070 EI79-5210 EI79-6010No. 100 150 µm 0.0059 EI79-5220* EI79-6020No. 120 125 µm 0.0049 EI79-5230 EI79-6030No. 140 106 µm 0.0041 EI79-5240 EI79-6040No. 170 90 µm 0.0035 EI79-5250 EI79-6050No. 200 75 µm 0.0029 EI79-5260* EI79-6060No. 230 63 µm 0.0025 EI79-5270 EI79-6070No. 270 53 µm 0.0021 EI79-5280 EI79-6080No. 325 45 µm 0.0017 EI79-5290 EI79-6090No.400 38 µm 0.0015 EI79-5300 EI79-6100Coarse Series5/16” 8.0 mm 0.312 EI79-5500 EI79-62003/8” 9.5 mm 0.375 EI79-5510* EI79-62107/16” 11.2 mm 0.438 EI79-5520 EI79-62201/2” 12.5 mm 0.500 EI79-5530* EI79-62305/8” 16.0 mm 0.625 EI79-5550 EI79-62503/4” 19.0 mm 0.750 EI79-5560* EI79-62607/8” 22.4 mm 0.875 EI79-5570 EI79-62701” 25.0 mm 1.00 EI79-5580 EI79-6280*
1-1/4” 31.5 mm 1.25 EI79-5600 EI79-63001-1/2” 38.1 mm 1.50 EI79-5610 EI79-6310*1-3/4” 45 mm 1.75 EI79-5620 EI79-6320
2” 50 mm 2.00 EI79-5630 EI79-63302-1/2” 63 mm 2.50 EI79-5650 EI79-6350*
3” 75 mm 3.00 EI79-5660 EI79-6360*3-1/2” 90 mm 3.50 EI79-5670 EI79-6370*
4” 100 mm 4.00 EI79-5680 EI79-6380*
Pan EI79-5410* EI79-6160*
Pan with extended rim EI79-5415 EI79-6165
Cover without ring EI79-5400* EI79-6150*
Cover w/recessed center ringcenter ring ring EI79-5405
U.S. Standard Testing SievesASTM E-11.
Unique epoxy fillet design ensures smooth anduninterrupted flow of material through sievingmedium.
Constructed using the finest quality mesh. Certificate of conformity to ASTM standards supplied
with every sieve.
ELE Testing Sieves are built to last longer. Our unique epoxy fillet design assures a uniform tautness and leaves no gap between the mesh and frame to trap material. Manufactured in one piece with no seams, they are solder-sealed to eliminate crevices and to make the sieve opening precise. This not only makes them more comfortable to handle since there are no raw edges, but also provides a smooth uninterrupted flow of material through the aperture with minimal loss.
Every ELE Sieve is meticulously checked and undergoes rigorous inspection at each stage of manufacture to ensure that the product meets ASTM standards. The certificate of examination that accompanies every sieve is more than just a formal statement of accuracy and performance on which you can depend; it is an assurance of outstanding quality, reliability, and strict adherence to testing standards.
Specifications
Frames. 8” (203 mm) Diam.: Full height; 2” (51 mm) depth to mesh.12” (305 mm) Diam.: Full height; 3-1/4” (82.5 mm) depth to mesh.
Construction. Polished and lacquered brass with S.S. mesh.
Nameplates. Show standard, alternate and Tyler Screen Scale equivalent designations.
Weights. 8” (203 mm) Diam.: Net 1 lb. (453 g).12” (305 mm) Diam.: Net 4 lbs. (1.8 kg).
Gradation - Sieves
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
120
For quotations and product pricing go to www.eleusa.com
121
Gradation - Sample Splitters
Large Capacity Sample Splitter
Adjustable chute widths. Lever-actuated, clamshell type hopper. Chute attachment for direct loading of one half of
final sample into container or bag.
The Large Capacity Sample Splitter is designed for samples too large in volume for convenient handling. This heavy-gage welded steel splitter divides samples so that half is representative of the original sample. It handles any material from sand sizes up to 4” (102 mm). The lever-actuated hopper holds up to 1 cu. ft. (0.028 m3) of material.
The universal chute section design consists of a set of aluminum bars that pivot on a rod at their lower ends. The top ends of the bars are flipped to alternate sides to form the desired chute width. Each chute bar is 1/2” (13 mm) wide so that adjustment is provided for any increment of 1/2” which will divide into the total 24” (610 mm) chute width an even number of times. Chute widths of 1/2”, 1”, 1-1/2”, 2”, 3”, 4”, or 6” may be selected by proper positioning of the bars.
Specifications
Capacity. 1 cu. ft. (0.028 m3); for sand sizes up to 4” (102 mm).
Hopper. Lever-actuated, clamshell design.
Chute Bars. 48 aluminum bars, 1/2” (13 mm) width.
Chute Area. 24” (610 mm) overall width.
ChuteOpenings.
Adjustable; 1/2”, 1”, 1-1/2”, 2”, 3”, 4”, or 6”.
Frame. Welded, heavy-gage steel.
ChuteAttachment.
Replaces pan to allow sample collection in bag;28-1/4” l. x 7”w. x 5-1/2” h. (718 x 178 x 140 mm).
MaterialPans.
Two included; 25-3/4” l. x 9” w. x 6-1/2” h.(654 x 229 x 165 mm).
OverallDimensions.
29” l. x 19” w. x 39” h. (737 x 483 x 999 mm).
Weight. Shpg. 142 lbs. (64 kg).
Ordering InformationIncludes two pans and chute attachment.
EI23-3425.
AccessoriesEI23-1420. Sample Bag. 10” x 18” (254 x 457 mm).
EI23-1422. Sample Bag. 17” x 32” (432 x 813 mm).
Replacement PartsEI23-3425/10. Material Catch Pan.
Wet Washing SievesASTM E-11.
Stainless mesh standard on all 8” (203 mm) diametermodels.
Optional models available with stainless steel back-upmesh.
Wet Washing Sieves are designed for wet testing of soils, cement, and other fine materials.
In the wet washing process, fines are washed through the sieve without loss of any portion of the sample. In most applications, the water is sprayed into the sieve for a set time and under a specified pressure. After the fines have been washed through, the residue which remains in the sieve is dried in the sieve prior to the weighing operation.
Specifications
Frame. Brass
Mesh. No. 200; brass on EI79-7010, stainless steel on EI79-7015,EI79-7025 series.
Weights. EI79-7010: Net 2 lbs. (0.9 kg).EI79-7015: Net 3 lbs. (1.4 kg).EI79-7025: Net 6 lbs. (2.7 kg).
Ordering InformationEI79-7010. 3” diam. x 3-1/2” h. x 3” depth to mesh (76 x 89 x 76 mm).
EI79-7015. 8” diam. x 4-1/2” h. x 4” depth to mesh (203 x 114 x 102 mm).
EI79-7020. Same as EI79-7015 with No. 26 back-up mesh.
EI79-7025. 8” diam. x 8-1/2” h. x 8” depth to mesh (203 x 216 x 203 mm).
EI79-7030. Same as EI79-7025 with No. 26 back-up mesh.
Wet Washing Spray AttachmentASTM C-115, C-430.
Machined brass nozzle construction. 30 psi (207 kPa) pressure gauge. Standard pipe fittings for mounting on a laboratory
water line system.
The Wet Washing Spray Attachment is used to control the water pressure and spraying flow during wet washing procedures. The unit consists of a machined brass spray nozzle, valve and pressure gauge.
Specifications
Spray Nozzle. Machined brass.
Gauge. 30 psi (207 kPa) capacity.
Fittings. Standard pipe.
Weight. Net 11 lbs. (5 kg).
Ordering InformationEI79-7040.
Sieve Brushes
To avoid damage, Sieve Brushes are recommended for use in cleaning the wire cloth and frame of the test sieve.
Specifications
Construction. EI79-7220: Stiff bristles with wood handle;1-1/4” diam. x 5-3/4” l. (32 x 146 mm).EI79-7225: Fine hair bristles with wood handle;1” w. x 10-1/2” l. (25 x 267 mm).EI79-7230: Wire bristles with wire loop handle.1-1/4” w. x 5-1/2” l. (32 x 140 mm).
Weight. Net 1 oz. (28 g).
ModelsEI79-7220. For fine sieves.
EI79-7225. For fine sieves.
EI79-7230. For coarse sieves.
Gradation - Sample Splitters
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
122
Gradation - Sample Splitters
For quotations and product pricing go to www.eleusa.com
123
Precision Sample Splitters
Stainless steel and aluminum alloy construction forrust resistance and long life.
Convenient cut-off gate control. Includes two sample pans.
This line of splitters has been developed to meet the requirements of reducing small size samples in the field or laboratory. Constructed of stainless steel and aluminum alloys, these splitters incorporate a cut-off gate which stops the flow of materials from the hopper.
The Precision Sample Splitter is ideally suited for use in fine powdered or pulverized materials which frequently tend to segregate.
Specifications
Splitter Blades. Stainless steel.
Cut-Off Gate. Lever operated.
HopperDimensions.
EI23-3360: 2-1/16 x 3-3/4” (52 x 95 mm).EI23-3370: 6-5/8” x 8-15/16” (168 x 227 mm).EI23-3380: 6-7/8” x 7-15/16” (175 x 202 mm).
Weights. EI23-3360: Net 2-1/2 lbs. (1.1 kg).EI23-3370: Net 7-1/2 lbs. (3.4 kg).EI23-3380: Net 11 lbs. (5 kg).
Ordering InformationIncludes two sample pans.
EI23-3360. 14 chutes, 1/8” (3.18 mm) blade width.
EI23-3370. 32 chutes, 1/4” (6 mm) blade width.
EI23-3380. 16 chutes, 1/2” (13 mm) blade width.
Aggregate Scoop Pan
Stainless steel construction. Tapered design for easy control material flow.
The aggregate scoop pan has a tapered design to simplify the control of granular materials into splitters, shakers or sieve sets.
Specifications
Construction. 18 gauge stainless steel; one fixed and one bail handle.
Dimensions. 27-3/8” x 12-1/4: x 3-15/16: d. (695 x 311 x 100 mm).
Weight. Net 8 lbs. (3.6 kg).
Ordering InformationEI23-3390.
Sample Splitters (Riffles)ASTM C-136, C-702, D-271, D-421, D-492;AASHTO T-27,T-87, T-248.
Short, steep channels for rapid flow and easycleaning.
Stainless steel hopper for rust resistance and long life. Includes three pans, scoop and cleaning brush.
The ELE Sample Splitters are designed for dividing or halving dry materials such as soils, sands, cement, gravel, powdered ores, coal, and similar material. The materials poured into the hopper are divided into two equal portions by a series of chutes which discharge alternatively in opposite directions into two separate pans.
Each Sample Splitter includes a stainless steel hopper supported on a painted steel frame, three containers, a flat-type scoop and a cleaning brush.
Specifications
Chutes. Stainless steel.
Hopper. Stainless steel.
Frame. Painted steel.
HopperDimensions.
EI23-3052: 6” x 9-3/4” (152 x 248 mm).EI23-3102: 7” x 13” (173 x 330 mm).EI23-3152: 9-5/8” x 19-1/4” (244 x 489 mm).EI23-3302: 9-3/4” x 19-1/4” (248 x 489 mm).EI23-3352: 9-5/8” x 23-1/2” (244 x 597 mm).
Weights. EI23-3052: Net 9 lbs. (4.1 kg).EI23-3102: Net 22 lbs. (10 kg).EI23-3152: Net 23 lbs. (10.4 kg).EI23-3302: Net 37 lbs. (16.8 kg).EI23-3352: Net 39 lbs. (17.7 kg).
Ordering InformationIncludes three sample pans, scoop and brush.
EI23-3052. 14 chutes, 1/2” (13 mm) chute width.
EI23-3102. 14 chutes, 3/4” (19 mm) chute width.
EI23-3152. 16 chutes, 1” (25 mm) chute width.
EI23-3302. 8 chutes, 2” (51 mm) chute width.
EI23-3352. 8 chutes, 2-1/2” (64 mm) chute width.
Replacement Parts3311-0015. Scoop pan for 23-3052.
4699-1805. Scoop pan for 23-3152 and 25-3302.
EI88-7810. Table brush.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
124
General
For quotations and product pricing go to www.eleusa.com
125
General - Muffle Furnace and Ovens
Standard Muffle Furnace
Percentage input controller for temperature stability of+/- 2% over entire range. Ceramic fiber insulation for faster heatup andreduced energy consumption. Built-in dual scale pyrometer with 0 to 1,200°C (32°Fto 2,200°F) range.Maximum operating temperature of 1,038°C(1,900°F).Heavy-duty welded steel case construction withenamel finish.
This simple, economical furnace is designed for bench or table top use and requires no special wiring. A percentage input controller is used to provide temperature stability of +/- 2% over the entire heating range.
Specifications
Temperature Range. 270°C to 1,038°C (518°F to 1,900°F).
Heating Time. To 871°C (1,600°F) in approximately 40 minutes.
Input Control. Selects from 5 to 100% of full rated input.
Heating Elements. Embedded on three sides.
Door. Swing-down type with safety switch.
Inner Dimensions. 5” w. x 6” d. x 4-1/4” h. (127 x 152 x 108 mm).
Overall Dimensions. 10” w. x 11” d. x 14-1/2” h. (254 x 279 x 368 mm).
Weight. Net 22 lbs. (10 kg); Shpg. 26 lbs. (12 kg).
Ordering InformationEI88-0110/02. 120vAC, 50/60 Hz. 1ø. 12.5 Amps. 1,500 Watts.
Bench Ovens
7 cu. ft. (198 liter) capacity.Available with either calibrated dial-type or digital PIDmicroprocessor temperature control.Fan forced-air circulation.
These portable Bench Ovens feature a large workspace and excellent portability. They can be moved to the job site or stacked one on the other to conserve space. The ovens have a chamber capacity of 7 cu. ft. (198 liters) and are supplied complete with two shelves.
The EI88-0140 series oven features a precise digital PID microprocessor temperature controller that will hold set temperatures accurately within one degree and improve chamber uniformity. The control incorporates a large, easy-to-read dual LED display, showing both set and process temperatures in either Fahrenheit or Centigrade.
Specifications
Capacity. 7 cu.ft. (198 liters).
Chamber Size. 25.5” w. x 24” d. x 20” h. (648 x 610 x 508 mm).
TemperatureRange.
EI88-0130: 51.7°C to 225°C (125°F. to 437°F). EI88-0140: 51.7°C to 232°C (125°F. to 450°F).
Thermostat. EI88-0130: Hydraulic.EI88-0140: Digital PID microprocessor temperature control.
Shelves. Two included.
OverallDimensions.
33” w. x 36.75” d. x 24” h. (838 x 933 x 610 mm).
Weight. 170 lbs. (77.6 kg).
Ordering InformationModel EI88-0140 series with digital PID shown.
EI88-0130/02. With hydraulic thermostat. 115vAC, 50/60 Hz, 1ø.
EI88-0140/02. With digital PID controller. 115vAC, 50/60 Hz, 1ø.
125 Muffle Furnaces126 Ovens127 Hot Plates128 Scales and Balances (Electronic)129 Scales and Balances (Mechanical)132 pH Meters133 Mixers134 Vacuum Pumps135 Proving Rings136 Dial Indicators137 Thermometers139 Timers140 Labware
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
126
General - Ovens
For quotations and product pricing go to www.eleusa.com
127
General - Hotplates
Hot Plate (39 Square Inch)
Specifications
Temperature Range. 100°C to 700°F (38°C to 371°C).
Top Plate. Cast Aluminum; 6-1/4” x 6-1/4”(159 x 159 mm).
Stability. ±1.1°C from 93° to 371°C
Thermostatic Control. Demand type; with cycle indicator light.
Case. Stainless steel.
Overall Dimensions. 6-5/8” w. x 7-5/8” d. x 4-3/8” h. (168 x 194 x 111 mm).
Weight. Net 4-1/2 lbs. (2 kg).
Ordering InformationEI88-0500/02. 120vAC, 50/60 Hz, 1ø. 750 Watts.
Hot Plate (288 Square Inch)
Specifications
Temperature Range. 100°F to 700°F (38°C to 371°C).
Thermostatic Control. Demand-type; holds heating surface to ±3°C at 371°C; with indicator light.
Top Plate. Cast aluminum; 24” w. x 12” d. (610 x 305 mm).
Case. Stainless steel.
Overall Dimensions. 24” w. x 13” d. x 6-1/8” h. (610 x 330 x 156 mm).
Weight. Net 35 lbs. (15.8 kg).
Ordering InformationCord and plug are not supplied due to high wattage consumption requirements.
EI88-0530/02. 120vAC, 50/60 Hz, 1ø. 3,200 Watts.
Forced Convected Ovens
Forced circulating airflow from top-mounted fan.Microprocessor based digital temperature controllerwith LED display.Manual reset hi-limit.Stainless steel interior.Easily installed.
Where fast processing and versatility are critical, the Forced Convected Oven is the most economical method of processing densely-loaded samples in testing, sterilizing, preheating, drying, aging, or curing applications. The unique oven design positions the fan to circulate air after it is heated to allow more uniform heat distribution. Temperatures are maintained automatically with a digital temperature controller. Time to recover temperatures after door openings is minimal. Constructed for uniform heating capabilities, reduced heat loss and energy savings, the oven features a stainless steel interior for easy cleaning.
Specifications
Chamber Size. EI88-0151: 24” w. x 14” d. x 22” h. (61 x 36 x 56 cm); 4.3 ft3 (122 liters).EI88-0156: 30” w. x 18” d. x 22” h. (76 x 46 x 56 cm); 6.9 ft3 (196 liters).
Overall Size. EI88-0151: 30” w. x 20.5” d. x 36.5” h. (77 x 53 x 93 cm).EI88-0156: 36” w. x 24.5” d. x 36.5” h. (92 x 63 x 93 cm).
Operating Range. EI88-0151: 35°C - 204°C (95°F - 400°F).EI88-0156: 35°C - 204°C (95°F - 400°F).
Weights. EI88-0151: 195 lbs. (88 kg).EI88-0156: 245 lbs. (112 kg).
Ordering InformationOvens not to be used with flammable solvents, combustible materials or enclosed containers.
EI88-0151/02. 120vAC, 60 Hz, 15 amps.
EI88-0151/01. 240vAC, 50/60 Hz, 1ø, 7.5 amps.
EI88-0156/02. 120vAC, 60 Hz, 21.6 amps.
Double Wall Laboratory Ovens
Sturdy, double wall welded steel construction.Thermostatically controlled.All components UL/CSA approved.Includes two plated shelves.
Designed for general laboratory tasks, Double Wall Laboratory Ovens are ideal for drying, baking, annealing, conditioning, sterilizing, evaporating, dehydrating and other general laboratory work. Available in a variety of sizes, this series of ovens is fully equipped with a thermometer and adjustable shelves. The double wall welded steel construction, baked enamel exterior, and corrosion resistant interior make this a sturdy, all-purpose laboratory oven.
Specifications
Capacity. EI88-0200: 0.7 cu. ft. (19.8 liter).EI88-0210: 2.0 cu. ft. (56.6 liter).EI88-0220: 3.0 cu. ft. (85 liter).
Chamber Size. EI88-0200: 12” w. x 10” d. x 10” h. (305 x 254 x 254 mm).EI88-0210: 18” w. x 12” d. x 16” h. (457 x 305 x 406 mm).EI88-0220: 18” w. x 14” d. x 21” h. (457 x 356 x 533 mm).
Temperature Range. 225°C (437°F) maximum.
Shelves. Two included.
Thermometer. One included.
Overall Dimensions. EI88-0200: 14” w. x 12” d. x 17” h. (356 x 305 x 432 mm).EI88-0210: 20” w. x 14” d. x 25” h. (508 x 356 x 635 mm).EI88-0220: 20” w. x 16” d. x 30” h. (508 x 406 x 762 mm).
Weights. EI88-0200: 41 lbs. (18.6 kg).EI88-0210: 70 lbs. (31.8 kg).EI88-0220: 90 lbs. (40.8 kg).
Ordering InformationEI88-0200/02. 115vAC, 50/60 Hz, 1ø.
EI88-0210/02. 115vAC, 50/60 Hz, 1ø.
EI88-0220/02. 115vAC, 50/60 Hz, 1ø.
EI88-0220/01. 230vAC, 50/60 Hz, 1ø.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
128
General - Scales and Balances (Electronic)
For quotations and product pricing go to www.eleusa.com
129
General - Scales and Balances (Electronic)
Champ II Series Bench Scales
AC and DC power supply.Auto shut-off.Large LCD display.RS232 standard.
Specifications
Capacity. 60 lb. x 0.01 lb. or 30 kg x 0.005 kg.
Platform Size. 12” x 14” (30.5 x 35.5 cm).
Power. 9 vDC/500 mA AC adaptor (included) or six “C” batteries (not included).
Weights. Net 24 lbs. (11 kg).
Ordering InformationEI88-1302/02. 60 lb./30 kg capacity. 120vAC, 50/60 Hz.
ES Series Low Profile Bench Scales
Low Profile, compact design.AC and DC power supply.Easy two-button operation.
Specifications
Capacity. EI88-1424: 110 lb. x 0.05 lb. or 50 kg x 0.02 kg.EI88-1428: 220 lb. x 0.1 lb. or 100 kg x 0.05 kg.
Platform Size. EI88-1424: 12.2” x 10.8” (31 x 27 cm).EI88-1428: 20.5” x 15.7” (52 x 40 cm).
Power. 9 vDC/AC adapter (included) or six “AA” batteries (not included).
Weights. EI88-1424: Net 6.6 lbs. (3 kg).EI88-1428: Net 33 lbs. (15 kg).
Ordering InformationEI88-1424/02. 110 lb./50 kg. capacity. 120vAC, 50/60 Hz.
EI88-1428/02. 220 lb./100 kg. capacity. 120vAC, 50/60 Hz.
Ohaus Series Electronic Balances
ELE offers a range of Electronic balances to satisfy many weighing requirements specified in ASTM and AASHTO standards. The range offered has been carefully selected in relation to the weighing capacity and readability to meet a wide range of specifications.
Ordering Information
Model NoMaximumCapacity Readability
Repeatability(Std. Dev.) Linearity
InternalCalibration
Pan size(in/cm):
DimensionsWxHxD(in/cm):
ShippingWt.
(lb/kg):
88-1024/02 310g 0.001g 0.001g +/-0.002g NO 4.7 / 128.7” x 7.5” x 11.8”
/ 22 x 19 x 30(with draft shield)
13.7 / 6.6
88-1034/02 810g 0.01g 0.01g +/-0.02g NO5.8 x 6.3 / 14.9 x 16.2
7.5 x 2.8 x 10 / 19.3 x 7.2
x 25.43.3 / 1.5
88-1044/02 2100g 0.01g 0.01g +/-0.02g NO6.6 X 7.1 / 16.8 X 18
8.7 x 7.5 x 11.8 / 22 x 19
x 3012.6 / 5.7
88-1054/02 3100g 0.01g 0.01g +/-0.02g NO 7.9 / 187.7 x 3.6 x 12.6 in / 19.6 x 9.2 x
32 cm
11.8 lb / 5.4 kg
88-1074/02 6,000g 0.1g 0.15g +/-0.4g NO7.9 x 9.5 in /
200 x 240 cm
10.5 x 13.2 x 4 in / 26.5 x 33.5
x 10 cm
12 lb / 5.1kg
88-1084/02 8100g 0.1g 0.1g +/-0.2g NO5.8 x 6.3 / 14.9 x 16.2
7.5 x 2.8 x 10 / 19.3 x 7.2
x 25.49.5 / 4.3
88-1094/02 15000g 0.05g 0.1g +/-0.15g NO9.5 x 13.8 in / 240 x 350 cm
14.2 x 14.6 x 4.5in / 36 x 37x 11.5 cm
24 lb / 10.6 kg
88-1104/02 35000g 0.1g NO9.5 x 13.8 in / 240 x 350 cm
14.2 x 14.6 x 4.5in / 36 x 37x 11.5 cm
24 lb / 10.6 kg
Units incorporate the latest weighing technology and are designed to provide consistent performance over long periods of time.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
130
General - Scales and Balances (Mechanical)
For quotations and product pricing go to www.eleusa.com
131
General - Scales and Balances (Mechanical)
Heavy-Duty Solution Balance
20 kilogram capacity.Magnetic damping.Covered, self-aligning bearings.Stainless steel platform.Convenient, built-in weights.
Specifications
Capacity. 20 kg.
Readability. 1 g.
Beams. 1,000 x 100 g; 100 x 1 g; two sliding weights.
Tare. 2,270 g.
Platform. Stainless steel plate; 11” (279 mm) diam.
Damping. Magnetic.
Attachment Weights. Slotted ratio type; one 1,000 g; two 2,000 g; one 5,000 g; one 10,000 g (included).
Overall Dimensions. 34” w. x 11” d. x 11” h. (864 x 279 x 279 mm).
Weight. Net 44 lbs. (19.9 kg).
Ordering InformationEI78-7600.
Triple Beam Scales
Tiered notched beams.Magnetic damping.Sturdy, rugged die cast construction.
Specifications
Capacity. 2,610 g.
Readability. 0.1 g.
Platform. Stainless steel plate; 6” (152 mm) diam. except for scale with scoop models.
Damping. Magnetic.
Attachment Weights. One 500 g; two 1,000 g (included).
Dimensions. 18” w. x 6” d. x 7” h. (457 x 152 x 178 mm).
Weights. Net 8 to 10 lbs. (3.6 to 4.5 kg).
Ordering InformationModel EI78-7140 Triple Beam Scale shown.
EI78-7140. Triple Beam Scale.
EI78-7142. Triple Beam Scale with Undivided Tare Beam. Tares up to 225 g.
Portable Bench Beam Scales
All steel housing with floating platform for lastingaccuracy.Self-aligning hardened steel bearings with frictionpoints.Mirrored balance indicators for fast, accurate andconvenient viewing.Built-in platform and beam mechanisms preventdamage during transport.Built-in carrying handle.
Specifications
Capacity. EI88-1500: 131 lbs.EI88-1520: 301 lbs.
Beams. EI88-1500: 125 lb x 5 lb; 5 lb x 1 oz; 1 lb x 0.1 lb.EI88-1520: 295 lb x 5 lb; 5 lb x 1 oz; 1 lb x 0.1 lb.
Tare. On fourth bar.
Platform. 131 lb and 52 kg models: 17” w. x 12” d. (432 x 305 mm).301 lb and 150 kg models: 21.75” w. x 16.25” d. (552 x 413 mm).
Locking Device. Lever type.
Carrying Handle. Built-in.
Weights. EI88-1500: Net 23 lbs. (10.4 kg).EI88-1520: Net 38 lbs. (17.2 kg).
Ordering InformationModel EI88-1520 series shown.
EI88-1500. 131 lbs. capacity.
EI88-1520. 301 lbs. capacity.
Multi-Purpose Field Scales
Available in either pound or kilogram models.Rugged single beam design for field use.Convenient, built-in weights.Cast-in handle in base.Large, metal platform pan.
Specifications
Capacity. EI88-1600: 36 lbs.EI88-1610: 16 kg.
Readability. EI88-1600: 0.01 lb.EI88-1610: 5 g.
Poise. Sliding.
Beam. 1 x 0.01 lb. and 500 g and 5 g; metric 500 x 5 g.
Platform. 10” (254 mm) diam.
Handle. Cast-in base.
Attachment Weights. Slotted ratio type; for full capacity.
Overall Dimensions. 22-1/4” w. x 9-3/4” d. x 10-1/8” h. (565 x 248 x 257 mm).
Weight. Net 23 lbs. (10.4 kg).
Ordering InformationEI88-1600. 36 lb. capacity.
EI88-1610. 16 kg capacity.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
132
General - PH Meters
For quotations and product pricing go to www.eleusa.com
133
General - Mixers
Buffer pH Solutions
Buffer pH Solutions are prepared using analytical grade chemicals in closely monitored laboratories. They are standardized with a pH meter that is calibrated to NBS/NIST primary standard buffer solutions. Every bottle has a lot number, expiration date, and pH/°C chart.
Ordering InformationEI88-2050. Buffer pH 4.01. 230ml Bottle.
EI88-2052. Buffer pH 7.01. 230ml Bottle.
EI88-2054. Buffer pH 9.18. 230ml Bottle.
EI88-2056. Buffer pH 10.06. 230ml Bottle.
Soil Test Solution
The Soil Test Solution prepares soil for pH measurement. In order for pH to affect it, soil must be moistened. This solution allows the chemical reaction in the soil to facilitate measurement of pH.
Ordering InformationEI88-2060. 230ml Bottle.
Standard Bench Mixers
15 quart (14.2 liter) bowl capacity.Space-saving, bench-top design.Unique 2-piece swing open safety guards.Continuously variable transmission delivers morepower to beater head shaft and allows the user tochange speeds while the mixer is running.
Specifications
Capacity. 15 qt. (14.2 liter) bowl. Actual sample capacity is lower and varies based on consistency and material type being mixed.
Motor. 1/3 hp.
Controls. Momentary contact STOP and START buttons and contactor.
Speeds. 4-locked in speeds of 125, 180, 240 and 300 rpm; plus any in-between speed.
Dimensions. 13-3/4” w. x 25-3/8” d. x 28-1/4” h. (349 x 644 x 717 mm).
Weight. Net 146 lbs. (66 kg); Shpg. 170 lbs. (77 kg).
Ordering InformationSupplied complete with stainless steel bowl, batter beater, wire whip and safety guards.
EI88-3000/02. 115vAC, 60Hz, 1ø.
MicrocomputerpH Meter
0.1 mV resolution,necessary forion selectiveelectrodes.Automaticallyrecognizes pH4.01, 7.01 and10.01 buffers.Simple 2 pointautomaticcalibration.3 meters in one: pH, mV and temperature are allmeasured accurately.
The Microcomputer pH Meter is able to perform pH, ORP, ISE and temperature measurements with high accuracy and fast response. The mV measurements automatically switch from 0.1 to 1 mV resolution when the reading reaches 400 mV. Temperature effects are compensated for automatically or manually on the control panel. The meter is supplied complete with a plastic body, double junction, gel pH electrode, and temperature probe.
Specifications
Range. pH: 0.00 to 14.000 pH.mV: 0.0 to ± 399.9 mV (ISE); 0.0 to ± 1999 mV (ORP).Temp: 0.0 to 100.0°C
Resolution. pH: 0.01 pH.mV: 0.1 mV.Temp: 0.1° C
Accuracy. pH: ± 0.01 pH.mV: ± 0.2 mV.Temp: ± 0.4° C
Calibration. Automatic with 3 memorized standard buffers.Temp. Comp. Automatic or Manual from 0°C to 100°C (32°F to 212°F).
Electrode. pH electrode: 120 mm l. x 12 mm diam. (.04” x 0.48”).
Temperature Probe. Interchangeable; 140 mm (5.51”) l.
Input Impedance. 1012 ohms.
Battery Type/Life. 1 x 9 volt (alkaline battery); 100 hours of continuous use.
Environment. 32° F. to 122° F. (0°C to 50°C); 95% RH.
Dimensions. 7.3 x 3.2 x 1.8” (185 x 82 x 45 mm).
Weight. 10 oz. (280 g) instrument alone; 1.2 lbs. (520 g.) Complete with pH electrode and temperature probe.
Ordering InformationEI88-2000.
Replacement Parts88-2000/10. Spare pH electrode.
Lightweight pH Tester
Two point fast and accurate calibration.Secure single action ON/OFF switch.Supplied with a rugged epoxy pH electrode.Usable with virtually any pH electrode.
The Lightweight pH Tester is specially designed to supply you with fast and accurate readings on a large liquid crystal display. Simply immerse the probe into your sample and read the pH value. The electrode can be changed and any pH electrode of different shape or size can be used. The tester is also suitable for checking electrodes in pipes and tanks and various other industrial applications.
Specifications
Range. 0.00 to 14.00 pH.
Resolution. 0.01 pH.
Accuracy. ± 0.2 pH.
Calibration. Two point through offset and slope trimmers.
Environment. 0°C to 50°C (32°F to 122°F); 95% RH.
Battery Type. 2 x 1.4 Volts.
Battery Life. 3,000 hours of continuous use.
Dimensions. 66 x 50 x 25 mm (2.6” x 2.0” x 1”).
Weight. Net 63g (2.2 oz.).
Ordering InformationEI88-2010.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
134
General - Vacuum Pumps
For quotations and product pricing go to www.eleusa.com
135
General - Proving Rings
Proving Rings
Repeatability within 0.2% of indicated load.Accuracy within +/-1% of indicated load.Factory calibrated.
ELE Proving Rings are available in the range of 450 lbf (2 kN) to 11,200 lbf. (50 kN). The repeatability of all Proving Rings is within 0.2% of the indicated load and the accuracy is +/-1% of the indicated load over the upper 80% of the working range at the calibration loads. The change of ‘no load’ reading during calibration is less than 0.1% of the deflection under full load.
All ELE Proving Rings are calibrated in kN and supplied with a calibration chart for conversion for lbf. and kgf.
Replacement PartsEI78-5461. Spare Dial Indicator for Load Rings.
When fitting replacement dial indicator the load ring should be re-calibrated.
Additional Proving Rings
All parts polished and plated for rust-resistance.Supplied complete with dial indicator and calibrationchart.
Ordering InformationPR-60. Proving Ring 0-6000lbs (2722kg), 8.459”h.
PR-100. Proving Ring 0-10,000lbs (4536kg), 9.025”h.
Ordering Information
ModelNumber
CapacityTypical Design
Sensitivity OverallHeight
Approx.Weight
lbf kN kgf Lbf/div
kN/div
Kgf/div
EI78-0060 450 2.0 200 0.30 1.3 0.13 9.76” (248 mm) 7 lbs. (3.2 kg)
EI78-0160 1,000 3.0 300 0.43 2.0 0.20 9.76” (248 mm) 7.3 lbs.(3.3 kg)
EI78-0260 1,000 4.5 450 0.66 3.0 0.30 9.76” (248 mm) 7.7 lbs.(3.5 kg)
EI78-0460 2,250 10.0 1,000 1.73 7.7 0.77 9.76” (248 mm) 10.1 lbs.(4.6 kg)
EI78-0760 6,000 28.0 2,800 5.45 25.5 2.54 9.76” (248 mm) 11.9 lbs.(5.4 kg)
EI78-0860 11,2000 50.0 5,000 10.18 45.5 4.54 9.76” (248 mm) 17.4 lbs.(7.9 kg)
Standard Vacuum Pump
Leak proof system.Exhaust dome and baffle prevent oil spray.Compact design.
The Standard Vacuum Pump is a compact, high-vacuum mechanical pump for all general laboratory applications. The unit consists of two series-connected eccentric pumps joined into a single unit. It attains an ultimate pressure of 0.3 microns of Hg in a leakproof system and has a free air displacement of 3 gallons (10 liters) a minute at its normal speed of 350 rpm. The improved exhaust dome and baffle prevent oil spray. A 1/3 h.p. motor mounted on a common base with the pump drives it through a V-belt.
Specifications
Pump. Two series-connected eccentric pumps; base-mounted.
Delivery. 0.3 microns of Hg; ultimate pressure in leakproof system; 3 gal/min. (10 liter/min) free air displacement at 350 rpm.
Motor. 1/3 h.p.;V-belt drive; base-mounted.
Intake Port. 13/32” (10 mm) o.d.; takes 1/4” (6 mm) bore tubing.
Overall Dimensions. 18-1/2” w. x 10” d. x 10-3/4” h. (469 x 254 x 273 mm).
Weight. Net 46 lbs. (21 kg).
Ordering InformationEI88-3100/02. 115vAC, 60 Hz, 1ø.
AccessoriesEI88-3115. High Vacuum Grease. 5.3 oz. (150 g) tube.
High Vacuum Pump
Gas ballast to purge moisture from vacuum system.Trap reduces risk of oil being sucked back into system.
Specifications
Free Air Displ. 85 liters per minute (3 cu. ft. per minute).
Ultimate Vacuum. 29.95 inches of mercury.
Motor/Pump. 1/3 hp; speed 1725 rpm.
Operating Temp. 30°F to 170°F (0°C to 78°C).
Intake Port. 1/4” o.d. for 1/4” tubing.
Dimensions. 11-1/4” h. x 15-1/2” l. x 6-1/2” w. (29 x 39 x 16 cm).
Weight. Net 28 lbs. (12.7 kg).
Ordering InformationEI88-3110/02. 115vAC, 50/60 Hz, 1ø.
AccessoriesEI88-3115. High Vacuum Grease. 5.3 oz. (150 g) tube.
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
136
General - Dial Indicators
For quotations and product pricing go to www.eleusa.com
137
General - Thermometers
Pistol-Grip Infrared Thermometers
Point and shoot with instant results.LCD backlit display.Selectable display in F° and C°.Maximum temperature display.Optional model with laser sighting light.
Specifications
Range. -25° to 750°F and –32°F to 400°C.
Accuracy. At 77°F (25°C) accuracy is +/- 1% of reading or +/- 2°F (+/- 1°C).From 0 to 77°F (-18 to 25°C) +/- 3°F (+/- 2°C).From -15 to 0°F (-26 to -18°C) +/- 4°F (+/- 2.5°C).From -25 to -15°F (-32 to -26°C) +/- 5°F (+/- 3°C), whichever is greater.
Repeatability. +/- 1% of reading or +/- 2°F (+/- 1°C), whichever is greater.
Response Time. 500 mSec.
Spectral Response. 7-18 micrometers.
Display Resolution. Tenth degree reading up to 199.9°.
Emissivity Value. Pre-set 0.95.
Power. 9-volt alkaline or NiCad battery.
Dimensions. 5.4” x 1.6” x 7.7” (137 x 41 x 196 mm).
Weight. 9.5 oz. (270 g).
Ordering InformationEI88-4400. Infrared Thermometer.
Digital Thermometer
Sealed membrane switches.Easy to use.Automatic range change.
This Digital Thermometer features sealed membrane switches for high durability and easy usage. Due to the design of the switches, this thermometer is more immune to moisture, dirt, or damage from dropping. At the push of a button turn the instrument on or off, or switch the reading between °F and °C. This economical, reliable digital thermometer has automatic range-change.
Specifications
Range. -40°F to 1000°F, switchable to -40°C to 535°C.
Accuracy. ±2°F/+/-1°C. NIST traceability certificate supplied.
Resolution. 0.1° at temperatures less than 200° (F or C); 1° at temperatures above 200° (F or C).
Battery. 3 AAA 1.5V batteries; 4500 hours life.
Display. LCD digits 1/2” (12.7 mm) tall.
Housing. Rugged ABS Housing with protective rubber boot; with probe holder and back wire belt clip.
Weight. Net 12 oz. (336 g).
Ordering InformationShown with optional probes; not included, order separately.
EI88-4420.
AccessoriesEI88-4420/12. Heavy-Duty Needle Probe. 205°C (401°F) max. temperature.
EI88-4420/14. Surface Temperature Probe. 650°C (1202°F) max. temperature.
Mechanical Dial Indicators
Low friction for long wear and highly accurate repeatreadings.Exceptionally low contact pressure for fast response inboth directions.
Specifications
ContactPoint.
Immediate response, up or down; tip movement magnified to indicator hand with minimal friction; 3/16” (5 mm) radius x 1/4” (6 mm) l.
Dials. With continuous graduations and revolution counters.
ClockwiseDials.
Measure movement towards dial case; pointer at zero with stem extended.
Counter-ClockwiseDials.
Measure movement away from dial case; pointer at zero with stem retracted.
Weight. Net 12 oz. (340 g).
AccessoriesEI88-4150. 1/4” (6 mm) Extension Point.
EI88-4152. 1/2” (13 mm) Extension Point.
EI88-4154. 1” (25 mm) Extension Point.
EI88-4156. 3” (76 mm) Extension Point.
Ordering InformationModel No Range Divisions Movement Face Diam.
EI88-4000 0.2” 0.0001” Clockwise 2-1/4”
EI88-4010 5 mm 0.002 mm Clockwise 57 mm
* EI88-4020 0.2” 0.0001” Clockwise 2-1/4”
EI88-4040 0.3” 0.0001” Clockwise 2-1/4”
EI88-4060 8 mm 0.002 mm Clockwise 57 mm
EI88-4070 0.4” 0.0001” Counter-clockwise 3-5/8”
EI88-4080 10 mm 0.0025 mm Counter-clockwise 92 mm
EI88-4120 1.0” 0.001” Counter-clockwise 2-1/4”
EI88-4100 1.0” 0.001” Clockwise 2-1/4”
**EI88-4160 2.0” 0.001” Clockwise 2-3/4”
EI88-4110 25 mm 0.01 mm Clockwise 57 mm
EI88-4130 25 mm 0.1 mm Counter-clockwise 57 mm
EI88-4210
*With brake. **With 2 revolution counters.
Electronic Digital Indicator
Ordering InformationEI88-4210. 0.600”/15 mm range.
General - Thermometers
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
138
For quotations and product pricing go to www.eleusa.com
139
General - Thermometers and Timers
Digital Pocket Thermometers
Versatile, wide temperature range.Easy reading LCD with 1/10° resolution.
Specifications
Range. -58° to +392°F or -50° to 200°C.
Resolution. 0.1°F or 0. 1°C.
Weight. 5 oz. (142 g).
Ordering InformationEI88-4434. Fahrenheit scale and Celsius scale.
Dual-Scale, Maximum-MinimumThermometer
Compact and lightweight.Shows Fahrenheit and Celsius scales simultaneously.Registers both high and low readings from last setting.Push-button reset.
Specifications
Ranges. -40° to +120°F and -40° to +55°C max.; -128° to +40°F and -54° to +40°C min.
Dimensions. 8-3/4” x 2-3/4” (222 x 70 mm).
Weight. Net 6 oz. (168 g).
Ordering InformationEI88-4610.
Universal TimeSwitches
8” (203 mm)diameter dial withlarge numerals forelapsed time and aninner circle of smallnumerals for use asstop clock.Automatically turnselectrical instrumentson and off atpreselected time periods.Automatic buzzer with volume control knob.Heavy-duty internal switch, and two three-wireoutlets.
Specifications
Load Capacity. Up to 750 watts (6 amps).
Time Range. 60 mins. x 1 sec.
Dial Face. 8” (203 mm) diam.
Outlets. One makes or breaks circuit after selected time interval; other automatically breaks circuit at preset interval.
Controls. On/off switch; outlet switch; volume knob for buzzer.
Construction. Steel case with handles.
Overall Dimensions. 8-1/2” w. x 2-1/4” d. x 8-1/2” h. (216 x 57 x 216 mm).
Weight. Net 3 lbs. (1.5 kg).
Ordering InformationEI88-4310/02. 60 minute range. 115vAC, 60 Hz, 1ø.
Digital Stopwatch
Specifications
Operation. Start-stop and lap split-reset push-buttons.
Time Range. Display up to 9 hours, 59 minutes, 59.99 seconds in 0.01 second increments.
Weight. 4 oz. (227 g).
Ordering InformationEI88-4340.
Dial Thermometers
Extremely accurate, dual-scale design.Corrosion-resistant, stainless steel stem.
Specifications
Construction. Dual-scale; 1/8” (3 mm) diam. stainless steel stem with bimetallic element; adjustable zero; plastic face.
Accuracy. ±1% when over 2” (51 mm) of stem immersed.
Dimensions. 1-3/4” (44 mm) dial diam. x 8” (203 mm) long stem.
Weight. Net 3 oz. (85 g).
Ordering InformationEI88-4450. 25° to 125°F x 2.0° and 0° to 50°C x 0.5°.
EI88-4452. 0° to 220°F x 2.0° and -10° to 100°C x 1.0°.
EI88-4454. 50° to 300°F x 2.0° and 10° to 150°C x 0.5°.
EI88-4456. 50° to 500°F x 5.0° and 0° to 250°C x 2.0°.
Pocket Dial Thermometers
Convenient pocket size design.Corrosion-resistant stainless steel stem and dial case.Supplied complete with pocket case and clip.Available in Fahrenheit or Celsius models.
Specifications
Construction. Stainless steel stem and dial case; pocket case and clip.
Overall Dimensions. 1” (25.4 mm) diam. x 5-1/2” (140 mm) l.
Weight. Net 8 oz. (227 g).
Ordering InformationEI88-4460. -40° to 160°F x 2.0°.
EI88-4462. 25° to 125°F x 1.0°.
EI88-4464. 0° to 220°F x 2.0°.
EI88-4466. 50° to 500°F x 5.0°.
EI88-4468. 0° to 250°C x 2.0°.
Glass Laboratory Thermometers
Easily read back glass.Comply with National Bureau of Standards.Monograph 150.
Specifications
Weight. Net 3 oz. (85 g).
Ordering InformationAll scaled for total immersion; packed in individual tubes.
EI88-4480NT. -20° to 110°C x 1.0°; 12” (305 mm) l.
EI88-4490. -30° to 120°F x 1.0°; 12” (305 mm) l.
EI88-4494. 0° to 300°F x 2.0°; 12” (305 mm) l.
EI88-4498. 20° to 500°F x 2.0°; 16” (406 mm) l.
Armored Thermometers
Armored thermometer point.Supplied complete with pocket case and clip.Ideally suited for use in concrete and asphalt.
Specifications
Construction. Glass; with armored point; pocket case and clip.
Weight. Net 2 oz. (56 g).
Ordering InformationEI88-4474. For asphalt. 100° to 450°F x 5.0°; 6” (152 mm).
General - Labware
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
140
General - Labware
For quotations and product pricing go to www.eleusa.com
141
Plastic Dispensing Bottles
Specifications
Material. Conventional polyethylene; non-toxic, non-contaminating; withstands nearly all chemicals at room temperature for 24 hrs.
TemperatureTolerances.
176°F (80°C) maximum; -148°F (-100°C) brittleness.
Weight. Net 2 oz. (56 g).
Ordering InformationEI88-6610. 8 oz. (250 ml) capacity.
EI88-6612. 16 oz. (500 ml) capacity.
Graduated Beakers
Ordering InformationEI88-6104. 100 ml capacity.
EI88-6106. 250 ml capacity.
EI88-6108. 400 ml capacity.
EI88-6110. 600 ml capacity.
EI88-6112. 1 liter capacity.
Glass Volumetric Flasks
Ordering InformationEI88-6200. 250 ml; with stopper.
EI88-6202. 500 ml; with stopper.
Glass Specific GravityBottleASTM D-854;AASHTO T-100.
Ground-in perforatedstoppers.Matching serial numbers onbottle and stopper.Meets ASTM specifications.
Ordering InformationGuy Lussac type with perforated stoppers.
EI88-6304. 100 ml.
Tall Non-Vacuum, Desiccator Cabinet
Molded of co-polyester plastic, this Desiccator Cabinet offers a clear view of contents. A hygrometer dial in the door allows for easy monitoring of relative humidity. The unit includes three sets of shelf rails and three clear shelves with small vent holes.
Specifications
Construction. Molded co-polyester plastic with dual hinged gasketed door and two locking latches.
Shelves. Clear with small vent holes; three included.
Door Opening. 8.9” x 16.4” h (41.7 x 22.5 cm).
OverallDimensions.
13.4” x 16.3” x 20.4” h. (34.1 x 41.4 x 51.8 cm).
Ordering InformationEI88-6700. Includes dial hygrometer.
EI45-9315/14. Drierite desiccant 1lb.
Glass Graduated Cylinders
Two sets of numerals, one reading from bottom totop, the other top to bottom.Individually packed one per carton.
Specifications
Numbering. Double; with zero at top and bottom.
Packing. 1 cylinder/carton.
Ordering InformationEI88-6002A. 25 ml capacity x 0.2 ml divisions. Net Wt. 2 oz. (56 g).
EI88-6007. 100 ml capacity x 1 ml divisions. Net Wt. 4 oz. (113 g).
EI88-6010. 500 ml capacity x 5 ml divisions. Net Wt. 13 oz. (364 g).
EI88-6012. 1 liter capacity x 10 ml divisions. Net Wt. 1 lb. 6 oz. (616 g).
Plastic Graduated Cylinders
Large, black base to resist tipping.Non-wetting, deliver all they contain.Generous pour spout.Compatible with virtually any chemical for typicalbrief use.Shatterproof cylinders.
Specifications
Construction. Polypropylene with octagonal base; non-toxic, non-contaminating; withstands nearly all chemicals at room temperature for 24hrs; some solvents can cause softening or swelling; keep from direct sunlight to prevent opaquing; autoclavable.
Water Absorption. Less than 0.02%.
Specific Gravity. 0.90.
TemperatureTolerances.
266°F (135°C) maximum; 32°F (0°C) brittleness.
Ordering InformationEI88-6024. 100 ml capacity x 1.0 ml divisions. Net Wt. 2-1/2 oz. (70 g).
EI88-6028. 500 ml capacity x 5.0 ml divisions. Net Wt. 7 oz. (196 g).
EI88-6030. 1 liter capacity x 10.0 ml divisions. Net Wt. 12 oz. (340 g).
General - Labware
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
142
General - Labware
For quotations and product pricing go to www.eleusa.com
143
Aluminum Moisture Boxes
The Aluminum Moisture Box is ideally suited for temporarily preserving moisture in samples to be weighed and dried for moisture determination. By using the Moisture Boxes, the user eliminates changing tare weights caused by rusting containers.
Specifications
Construction. Heavy-gage aluminum.
Lid. Fits onto bottom as well as top of box.
Ordering InformationEI88-7004. 2-1/2” diam. x 1-3/4” h. (64 x 44 mm). Carton of 12.
EI88-7008. 3-1/2” diam. x 2” h. (90 x 51 mm). Carton of 12.
Tin Sample Boxes
Specifications
Construction. Drawn tin.
Lid. Fits on bottom as well as top of box.
Ordering InformationEI88-7022A. 3 oz. (85 g) capacity; 2-1/8” diam. x 1-3/8” h. (54 x 35 mm). Carton of 12.
EI88-7026. 6 oz. (142 g) capacity; 2-3/4” diam. x 1-7/8” h. (70 x 48 mm). Carton of 12.
EI88-7028. 8 oz. (227 g) capacity; 3-1/8” diam. x 2” h. (82 x 51 mm). Carton of 12.
Sample Cans
Specifications
CylindricalCans.
Tinned metal; lacquered inside; friction-closing cover.
Ordering InformationEI88-7040. 1 qt. capacity; 4-1/8” diam. x 4-7/8” (105 x 124 mm).
EI88-7042. 4 qt. capacity; 6-5/8” diam. x 7-1/2”(168 x 190 mm).
Evaporating Dishes
These Evaporating Dishes are the porcelain type with pour out. Model EI88-6712 is glazed both inside and outside, with the exceptions of the rim. 88-6718 is glazed inside and partly outside.
Specifications
Construction. Porcelain; with lip.
Ordering InformationEI88-6712. 115 mm diam.; 250 ml capacity.
EI88-6718. 215 mm diam.; 1,285 ml capacity.
Mortars and Pestles
Specifications
Material. Porcelain.
Weight. Net 6 lbs. (2.7 kg).
Ordering InformationEI88-6802. 225 ml capacity. 5-1/8” (130 mm) diam. x 2-3/4” (70 mm) h. 7” (178 mm) long pestle.
EI88-6804. 650 ml capacity. 7-1/4” (184 mm) diam. x 3-3/4” (95 mm) h. 9” (229 mm) long pestle.
Soil Mortar and Pestle
Heavy porcelain mortar, glazed on outside.Rubber-tipped, wooden handle pestle.
The heavy porcelain Soil Mortar is used with the rubber-tipped, Soil Pestle for breaking down lumpy material prior to testing. The rubber tip on the pestle prevents the breaking down of individual particles.
Specifications
Mortar. Porcelain; glazed outside; 5” diam. x 2-1/2” h. (127 x 64 mm).
Pestle. Rubber tip with wood handle; 8” (203 mm) long.
Weights. EI88-6810: Net 4 lbs. (1.8 kg).EI88-6812: Net 8 oz. (227 g).
Ordering InformationEI88-6810. Soil Mortar.
EI88-6812. Soil Pestle.
General - Labware
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
144
General - Labware
For quotations and product pricing go to www.eleusa.com
145
Round Bottom Scoops
Specifications
Dimensions. EI88-7300: 3-1/4” x 5” x 2”(82 x 127 x 51 mm).EI88-7302: 5” x 8” x 3”(127 x 203 x 76 mm).
Ordering InformationEI88-7300. 1/2 qt. capacity. Aluminum.
EI88-7302. 2 qt. capacity. Aluminum.
Plastic Flat Bottom Scoops
Specifications
BowlDimensions.
EI88-7310: 6-3/4” x 5-1/4” x 3-1/4” (171 x 133 x 83 mm).EI88-7312: 8-1/4” x 6” x 5” (210 x 152 x 127 mm).
Ordering InformationEI88-7310. 1 qt. capacity.
EI88-7312. 2 qt. capacity.
Trowel
Specifications
Handles. Wood.
Blades. Steel plated; triangular.
Ordering InformationEI88-7400. 2-1/2” w. x 4-1/2” l. (63.5 x 114 mm) blade.
Spatulas
Specifications
Handle. Wood.
Blade. Stainless steel.
Weight. Net 2 oz. (56 g).
Ordering InformationEI88-7500. 4” l. x 11/16” w. (102 x 19 mm) blade.
EI88-7520. 10” l. x 1-1/4” w. (254 x 32 mm) blade.
Wire Saw
Specifications
Frame. Narrow type; one-piece metal with adjustable threaded screws, plated for rust resistance; supplied with wires only; 16” (406 mm) l. overall.
Cutting Section. 9” (229 mm) l.
Spare Wires. Six included.
Weight. Net 4 oz. (113 g).
Ordering InformationEI88-7600. Narrow.
Sampling Spoon
Specifications
Construction. Heavy-gage stainless steel.
Length. Approx. 12” (305 mm).
Weight. Net 4 oz. (113 g).
Ordering InformationEI88-7700.
Mixing Pans and Bowls
Ordering Information
Rectangular:EI88-7100. Tin; 8-1/2” x 4-1/2” x 2-3/4” (216 x 114 x 70 mm).
EI88-7110. Aluminum; 9” x 13” x 2” (229 x 330 x 51 mm).
EI88-7120. Stainless; 21” x 13” x 2” (525 x 330 x 51 mm).
EI88-7130. Stainless; 11” x 9” x 3” (279 x 229 x 76 mm).
Square:EI88-7140. Tin; 7-3/4” x 7-3/4” x 2” (197 x 197 x 51 mm).
EI88-7150. Galvanized sheet metal; 18” x 18” x 3” (450 x 450 x 76 mm).
EI34-0152. Galvanized sheet metal; with handles; 24” x 24” x 3” (600 x 600 x 76 mm).
Round:EI88-7180. Stainless; 9” diam. x 4” (229 x 102 mm).
Plastic Funnel
Specifications
Materials. Conventional polyethylene; non-toxic, non-contaminating; withstands nearly all chemicals at room temperature for 24 hrs.
TemperatureTolerances.
176°F (80°C) maximum; -148°F (-100°C) brittleness.
Ordering InformationEI88-7202. 4” (102 mm) top diam.; 3” (76 mm) stem.
General - Labware
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
146
For quotations and product pricing go to www.eleusa.com
Index
147
Brushes
Specifications
Construction. EII88-7810: Black horsehair reinforced with nylon; 8” (203 mm) brush face; Wood handle.EI88-7820: Ten wire points/hole, 0.017 x 0.059flat wire; 7- 3/4” x 2-5/8” (196 x 66 mm) hardwood block.
Ordering InformationEI88-7810. Table Brush.
EI88-7820. Wire Brush.
Preparation Knife
Specifications
Handle. Wood.
Blade. Thin steel; sharpened on one edge.
Ordering InformationEI88-7910. 10” (254 mm) l. overall; 6” (152 mm) l. blade.
Gloves
Ordering InformationEI88-7920. Hi-Temp. Neoprene coated; quilted cotton lining; 12” (305 mm) long; men’s size. One pair.
Rubber Mallet
Specifications
Head. Rubber; 2” (50.8 mm).
Handle. Hardwood; 10” (254 mm) long.
Weight. Net 1 lb. 6 oz. (616 g).
Ordering InformationEI88-7940.
Chisel
Specifications
Construction. One-piece hardened steel; 1” (25.4 mm) w. blade.
Weight. Net 2 lbs. (0.9 kg).
Ordering InformationEI88-7960.
Vernier Calipers
Dual-scale design.Hardened, stainless steel construction.
Specifications
Construction. Hardened stainless steel.
Vernier Readings. 0 to 0.025” x 0.001” divisions; and 0 to 1 mm x 0.05 mm divisions.
Scales. 0 to 7.3” x 0.1 x 0.025” divisions; and 0 to 17 cm x 1 mm divisions.
Weight. Net 12 oz. (340 g).
Ordering InformationEI88-8050.
AASHTO Grooving Tool
Accutek Oil
ACCU-TEK™ 250 Digital Series
ACCU-TEK™ 250 Economy Series
ACCU-TEK™ 350 Digital Series
ACCU-TEK™ 500 Digital Series
Acme Laboratory Penetrometer
Acrylic Specimen Cap and Base
Actuator Bulb Assembly
Adapter Foot
ADR Acquisition Software
ADR Advanced Digital Readout
Aggregate Abrasion Test
Aggregate Scoop Pan
Aggregate Screen Shakers
Air Entrainment Meter
Aluminum Moisture Boxes
Armored Thermometers
Asphalt Centrifuge Extractors
Asphalt Flow Indicators
Asphalt Penetrometer
Asphalt Sample Ejector
Aspirator Type Filter Pump
ASR DetectTM Alkali Silica Reaction Kit
ASTM Liquid Limit Set
ASTM Plastic Grooving Tools
ASTM Slider and Pin Cup Holder Assembly
ASTM Soil Hydrometers
ASTM Vicat Mold and Glass Plate
ASTM Vicat Needle
Auger Extension
Auger Extension with Connector Pin
Auger Head with Connector Pin
Automatic Soil Compactors
Autonomous Data Acquisition Unit (ADU)
Auxiliary Control Panel
Axial Strain Dial Indicator
Axial Strain Transducer
Ball Seating Attachment
Balloons
Base Pedestal
Basic Auger Kit
Basic Laboratory Compaction Set, Hand Operated
Basic Laboratory Compaction Set, Motorized
Basket Retainers
Bench Ovens
Benkelman Beam
Biodegradable Solvent
Blade Head Assembly
Blaine Air Permeability Cell
Blaine Fineness Apparatus
Block Platen Sets
Bracket and Adapter
Brass Cup
Brass Sieve
Bridge Support
Buffer pH Solutions
C.O.E. Cone Penetrometer
Cable
Calibrated Crack Monitor
Calibration Anvil, Concrete Test Hammer
Calibration container
Calibration Discs, Consolidation
Calibration Kit
Cap & Base Sets
Capping Compound Warming Pots
Capping Ladle
Capping Plates
CBR Displacement Transducer
CBR Loading Press, Hand Operated
CBR Mold
CBR Penetration Piston Assembly
CBR Penetration Software
CBR Test Accessory Set
CBR-Test 50 Machine
Cement Compression Tester
Cement Cube Molds
Cement Mold Brush
Cement Setting Time Test Set
Champ II Series Bench Scales
Chapman Flask
Chisel
Chloride Field Test System
Circulating Water Bath
Color Standard Chart
Combination Permeameter Constant or Falling Head
Compaction Mold Holder
Compaction Molds
Compaction Pedestal
Compaction Permeameter
Compression Pads
Concrete Air Entrainment Meter
Concrete Air Indicator
Concrete Air Indicator Kit
Concrete Capping Pads and Retainers
Concrete Compression Testers
Concrete Curing Tanks
Concrete Cylinder Compressometer-Extensometers
Concrete Micrometer
Concrete Mortar Penetrometer
Concrete Permeability Test System
Concrete Test Hammers
Cone Penetrometer, Liquid Limit
Connector Pin
Consolidation Frames
Consolidation Displacement Transducer
Constant and Falling Head Accessory Kit
Constant Head Sand/Gravel Permeameters
Constant Head Tank System, Permeability
Contact Points
Corrosion Mapping System
Cover Plate, 2” Cement Mold
Cover w/recessed center ring
Cover without ring
Crack Detection Microscope
Cradle, for Buoyancy Balance
Crystallizing Dish
Cube Molds, Concrete
Cube Test Sand
Cube Test System, Cement
Curing Tank Heaters
Cutting Edge, CBR Mold
Cutting Rings, Consolidometers
Cylinder Cappers, Concrete
Cylinder Capping Sets
DataSystem Consolidation Test Sets
DataSystem Direct/Residual Shear Test Sets
Density Basket
Density Drive Samplers
Density of Coarse Aggregates Test Set
Density Sand
Density Tubes
Desiccator Cabinet
Dial Indicator
Dial Indicator and Holder Assembly
Dial Indicator Holder
Dial Thermometers
Diaphragms
Digital Pocket Thermometers
Digital Point Load Tester, Rock
Digital Pressure Gauge, Triaxial Systems
Digital Readout, Triaxial Systems
Digital Stopwatch
Digital Thermometer
Digital Tritest 50 Load Frame
Direct/Residual Shear Apparatuss
Direct/Residual Shear Test Sets
Double Ring Infiltrometer
Double Wall Laboratory Ovens
Drainage Lines, Triaxial Systems
44
56
58
59
57
56
92
12
36
48
60
60
99
123
115
79
143
138
112
102,103
113
102,104
110,111
76
45
44
44
42
91
91
52,53
38
38
29
5
14,15
10
7
33
36
12
51
29
29
50
125
109
112
53
90
90
56,57,58
33
44
96,99,119
33
133
47
54
75
74
79
26
29
18
69
69
69
7
32
34
32
5
31
32
86
88
89
91
129
97
146
78
106
98
21
102,105
102,104
102,105
21
88
79
80
80
70
56-59
68
66
73
93
77
74
45
38
24,25
7
21
20
20
94
78
88
119
99,119
75
84
46
72
89
88
68
34
26
69
70
24
23
96
39
96
36
39
112,141
10,22,107,136
108
32
138
107
139
100
16
10,11,16
113,139
137
10
22
23
19
126
12
A
B
C
D
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
Index
148
For quotations and product pricing go to www.eleusa.com
Index
149
Drierite Desiccant
Drill Rod Extensions
Drive Tube Assembly
Direct/Residual Shear Software
Dustpan Tray
Dutch Augers
Effective Stress Triaxial Software
Ejector Head and Adapter Plate
Ejector Head and Plate
ELE Buoyancy Balances
ELE Digital Compression
ELE Hand Auger
ELE RotasiftTM Laboratory Sifter
Electric Pump Attachments
Electronic Balances
Electronic Digital Indicator
ES Series Low Profile Bench Scales
Evaporating Dishes
Expansion Analog Input Module
Expansion Index Test Apparatus
Expansion Pressure Device
Expansion Pressure Frame
Extension Points
Extension Rods
Field CBR Jack
Field Density Plates
Field Penetration Piston
Filter Discs
Filter Papers
Filter Paper Discs
Filter Paper Drains
Filter Screen
Filtering Kit
Fine Sieve Brushs
Fixed Ring Consolidometers
Flake Capping Compound
Flexural Attachments, Concrete Compression Testers
Floating Ring Consolidometer
Floor Mounting Stand
Flow Caliper
Flow Mold
Flow Table
Forced Convected Ovens
Frame Stands
Gauge Kit, Air Entrainment Meter
Geotech Software General Module
Glass Graduated Cylinders
Glass Laboratory Thermometers
Glass Specific Gravity Bottle
Glass Volumetric Flasks
Gloves
Graduated Beakers
Graduated Cylinders
Graduated Cylinder and Gasket Set
Graduated Impurities Test Bottle
Graduated Tamping Rod
Guelph Permeameter
Hand Vane Tester
Hand-Operated Liquid Limit Devices
Hard Rubber Tamper
Harvard Trip Balance
Heavy-Duty Beam Forms
Heavy-Duty Cylinder Carrier
Heavy-Duty Cylinder Molds, Concrete
Heavy-Duty Needle Probe
Heavy-Duty Solution Balance
High Vacuum Grease
High Vacuum Pump
High-Capacity Vane
Horizontal Displacement Transducer, Direct Shear Machine
Horizontal Sample Ejector
Hot Plates
Humidistat Controller
Hveem Diaphragm Replacement Tool
Hveem Stabilometers
Hveem Test Block
Hveem Test Mold
Hydrometer Jar
Hydrometer Jar Baths
Kelly Ball Apparatus
K-Slump Tester
Laboratory Concrete Mixer
Laboratory Vibrator, Concrete
Large Capacity Sample Splitter
Le Chatelier Flask
Lead Cylinders, Calibration Soil Compactor
Length Comparators
Lever Type Calibration Device
Lightweight pH Tester
Liquid Limit Device with counter
Los Angeles Abrasion Machine
Manometer Panel, Permeability Systems
Manometer U-Tube, Blaine
Marshall Breaking Head
Marshall Stability Test Set
Master Humidifier
Material Catch Pan
Maximum-Minimum Thermometer
Mechanical Analysis Stirrers
Mechanical Dial Indicators
Membrane Testers, Triaxial
Microcomputer pH Meter
Mixing Paddle
Mixing Pans and Bowls
Modified Compaction Molds, Soil
Mortar Mixer
Mortars and Pestles
Motorized Liquid Limit Device
Mud Augers
Multi-Purpose Field Scales
Sand Absorption Cone and Tamper
No-Volume Change Valve, Triaxial Systems
NW Rock Cradle
Oakfield Soil Sampling Kit
One-Dimensional Consolidation Software
O-Ring Placing Tools, Triaxial Systems
Pans
Pan with extended rims
Particle Size Analysis Test Set
Pedestal for testing, Concrete Compression Testers
Penetration Needles
Penetration Test Cone
Penetration Test Cup
Permeability in a Triaxial Cell Software
Permeameter Extension Kit, Guelph Permeameter
Pistol-Grip Infrared Thermometers
Piston Restraint Clamp, Triaxial Cells
Plastic Beam Form, Concrete
Plastic Caps
Plastic Carrying Case, Water Level Indicator
Plastic Cylinder Molds, Concrete
Plastic Dispensing Bottles
Plastic Disposable Liners
Plastic End Caps
Plastic Filtering Flask
Plastic Flat Bottom Scoops
Plastic Funnel
Plastic Graduated Cylinders
Plastic Lids
Plastic Limit Set
Plastic Sand Jug
Plastic Tubing
Platen Sets, Concrete Compression Testers
Pneumatic Consolidation Apparatus
Pocket Dial Thermometers
Pocket Penetrometer, Soil
Pocket Tachometer
Porous Stones
Porous Stones, Direct Shear
Portable Bench Beam Scales
Portable Dynamic Cone Penetrometer
Portable Dynamic Cone Penetrometer/Auger Set
Portable Electric Bench Oven
Portable Electronic Balances
Portable Impact Tape Printers, Concrete Compression Testers
Portable Slump Test Set
Post Hole Augers
Precision Air Entrainment Meter
Precision Sample Splitters
Preparation Knife
Pressure Transducers
Press-Ur-Meter
Probe Assembly
Probe Rod
Proctor Penetrometer Sets
Proportional Caliper Device
Proving Rings
Proving Ring Penetrometer
Pump Assembly, Air Entrainment Meter
Pure Mineral Oil, Blaine Apparatus
Pycnometer Attachment
Pycnometer Top and Jar
Quick Undrained Triaxial Software
Ram Seals, Concrete Compression Testers
Ram Seal Kit
Rapid Moisture Tester
Rapid Moisture Tester Reagents
Regular Augers
Relative Density Gauge Set
Relative Density Set
Relative Density Mold Sets
Residual Pressure Manometer, Rice Test
Resonant Frequency Tester, Concrete
Rice Test Vibrators
Rock Classification Hammer
Rod Comparator
Ro-Tap® Sieve Shakers
Round Bottom Scoops
Rubber Mallet
Rubber Membranes, Triaxial
Rubbing Stone, Replacement, Concrete Test Hammer
Sample Bags
Sample Cans
Sample Ejectors
Sample Splitters
Sample Tube
Sampling Spoon
Sampling Tube
Sand Absorption Cone
Sand Absorption Tamper
Sand Augers
Sand Density Cones
Sand Equivalent Cylinder
Sand Equivalent Shaker
Sand Equivalent Test Set
Sand Grading Chart
Scoop and Counter Weight
Scoop Pans
Screen Trays
Sealing Rings
Sensitive Vane
Shear Box Assemblies
Shrinkage Dish
Shrinkage Limit Set
Shrinkage Prong Plate
Sieve Brushes
Sieve Shakers
Sieves, ASTM
Silver Probe Kit
Sliding Drive Hammer Assembly
Slump Cone Base
Slump Cone Funnel
Slump Cones
Slump Test Set
Sodium Hexametaphosphate
Sodium Hydroxide Solution
Soil Color Charts
Soil Dispersion Cup
Soil Mortar and Pestles
Soil Test Solution
Soil Volume Change Meter
Solid Rubber Stopper
Spacer Discs
Spare Dial Indicator
Spare pH electrode
Spare Triaxial Cell Top
Spatulas
Specimen Cap
Specimen Cutter, Direct Shear
Specimen Extrusion Tool, Direct Shear
Specimen Ring, Floating Ring Consolidometer
SpeedyTM Calibration Kit
SpeedyTM Moisture Tester
SpeedyTM Moisture Tester Reagent
Split Compaction Mold, Soil
Square Specimen Cutter, Direct Shear
Square Specimen Extrusion Tool, Direct Shear
Stability Compaction Hammer, Asphalt
Stainless Steel Beater
Stainless Steel Bowl
Standard Bench Mixers
Standard Compaction Hammer
Standard Compaction Mold
Standard Muffle Furnace
Standard Reference Material, Cement
Standard Split Tube Samplers
Standard Vacuum Pump
Standard Vane
Stock Solutions
Straightedge
Stripping Tool
S-Type Load Cells
Submersible Load Transducers
Suction Membrane Device, Triaxial
Surcharge Weights, CBR
Surface Temperature Probe
Swell Plate, CBR
Table Brush
Table Top Consolidation Apparatus
Tamping Rods, Slump Test
Tee Handle with Connector Pin, Hand Augers
Test Bar Molds, Cement
Test Gauge
Test Sand
Thin Wall Tube Samplers
Tin Sample Boxes
Torvane Shear Device
Transducer Extension Cable
Transfer Dish
Triaxial Cell
Triaxial Load Frames
Tri-Flex 2 Master Control Panel
Tri-Flex 2 One-Cell Triaxial Test Set
Tri-Flex 2 Permeability Test Cell
Tri-Flex 2 Triaxial Cell
Tri-Flex 2/DataSystem Triaxial Test Set
Triple Beam Scales
Tripod Attachment
140
71
46
37
110
56,58
25
138
48
67
13,18,21,26,27
23
130
38
38
99,125
40
56,60
81
53
79
123
146
8,60
79
54
39
47,92
98
10,102,135
47
79
90
111
97
4
56,57
58
40
40
52
35
35
35
111
74
111
100
46
117
145
146
13,18
74
54,121
143
31,51
122
38
145
54
96
96
52
36,37
43
43
43
49
91
122
115
13,18
48
23
46
46
46
120
116
99,119
76
38
82
81
82
81
42
98
49
41
142
133
27
42
33
135
132
12
145
12
23
23
26
40
40
40
30
23
23
102,105
87
87
133
30
29,30
125
90
50
111,134
48
43
30
71
6
6
13
33
137
34
122,146
24
82
38
94
45
89
50
113,143
48
8
113
12
10,11
14
9
18
12
9
131
34
111,141
38
38
5
115
52
4
51
31
84,96
59
53
116
61
128
94,136
129
112,142
5
27
108
108
136
33,54
33
37
33
112
33,90
13,102,104
13
33
110,111
119,120
24,26
70
56,57,58
24
24
93
93
93
126
56,57,59,61
79
4
140
138
141
141
146
141
112,140
36
98
79
19
49
44
88,89
91
72
73
71
137
99,131
134
14,134
48
7
50
127
68
107
107
107
107,108
42
41
83
83
66
67
121
90
29
94
108
132
44
99
20
90
102,103
102
68
121
139
41
24,136
13
132
41
82,144
29,30
87
142
44
52
130
96
12
100
54
4
13
96,112,144
119
42
56,57,58,59,62
113
45
4
45
19
137
12
72
50
54
71
141
88
38
111
145
144
E
F
G
H
K
L
M
N
O
P
Q
T
R
S
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
Index
150
For quotations and product pricing go to www.eleusa.com
Numerical Index
151
Tropical Soil Charts
Trowel
Two-Part Split Mold, Triaxial
Two-Way Split Formers, Triaxial
Unconfined Compression Platens and Dial Gauge Assembly
Unconfined Compression Test Accessory Sets
Unconfined Compression Test Digital Readout Sets
Unconfined Compression Tester, Hand Operated
Unit Weight Measures
Universal Time Switches
Vacuum Pycnometers, Rice Test
Vacuum Pycnometer Attachment
Vane
Vapor Emission Test Kit, Concrete
Vernier Calipers
Versa-Loader, Multi-Purpose Machine
Vertical Dial Indicators
Vertical Displacement Transducer, Direct Shear
Vibrating Table
Vicat Apparatus, Cement Setting Time
Volume Change Transducer, Triaxial Systems
Volumeasure®
Volumeasure® Pressure Gauge
Volumetair
Water Bath
Water De-Airing Tank System, Triaxial
Water Level Indicators
Weight Sets
Wet Washing Sieves
Windsor HP Probe System
Wire Brush
Wire Saw
Yield Buckets
2000/01
2000/02
2001/01
2001/02
2020/01
2020/02
2021/01
2021/02
2100/01
2100/02
2101/01
2101/02
2102/01
2102/02
2103/01
2103/02
2230/01
2230/02
2300E
2310/02
23-1346
23-1346/10
23-1350
23-1350/10
23-1352
23-1352/10
23-1356
23-1360
23-1370
23-1378
23-1380
23-1382
23-1384
23-1386
23-1389
23-1391
23-1391/10
23-1392
23-1393
23-1397
23-1400
23-1400/10
23-1400/11
23-1400/12
23-1400/13
23-1410
23-1410/10
23-1410/12
23-1420
23-1422
23-1750
23-1751
23-1752
23-1752/10
23-1753
23-1753/10
23-1754
23-1755/10
23-3052
23-3102
23-3152
23-3302
23-3352
23-3360
23-3370
23-3380
23-3390
23-3425
23-3425/10
23-4085
23-4085/10
23-7100
23-7120
23-7130
23-7452
23-7452/12
23-7550
23-7550/10
23-7550/11
23-7550/12
23-7600
23-7702
23-8104
24-0435
24-0435/10
24-0435/12
24-0437
24-0441/02
24-0451
24-0461
24-0540
24-0544
24-0546
24-0548
24-0811
24-1500
24-1550
24-1600
24-2885
24-4132/01
24-4132/02
24-4132/10
24-4132/11
24-4145
24-4640
24-4650
24-4700
24-4867/01
24-4867/02
24-4917
24-4917/10
24-4936
24-4938
24-4949/02
24-9010
24-9062
24-9063
24-9070
24-9095/01
24-9095/02
24-9095/12
24-9095/13
24-9097
24-9098
24-9112/01
24-9112/06
24-9114
24-9116
24-9118
24-9150/02
24-9175
24-9179
24-9183
24-9188
24-9229
24-9236
24-9237
24-9238
24-9240
24-9244
24-9245
24-9246
24-9247
24-9248
24-9250
24-9260
24-9262
24-9290
24-9300
24-9308
24-9312
24-9345
2500/01
2500/06
25-0380
25-0390
25-0402
25-0429
25-0440
25-0445
25-0455
25-0458
25-0461
25-0479
25-0479/13
49
145
13
13
28
28
28
28
84,97
139
110,111
111
49
77
146
11
22,109
7
35,67
91
7
36
36
80
102,106
14,15
54
22,24,91
120
76
146
145
84,97
9
9
9
9
9
9
9
9
23
23
23
23
23
23
23
23
24
24
29
29
50
50
50
50
50
50
50
50
50
51
52
52
52
52
52
53
53
53
53
53
53
38
38
38
38
54
54
54
54,121
54,121
54
54
54
54
54
54
54
54
122
122
122
122
122
123
123
123
123
121
121
31
31
49
49
49
40
40
40
40
40
40
40
40
97
44
44
44
44
44
44
44
45
45
45
45
46
46
46
46
97
41
41
41
41
42
42
42
42
41
41
43
43
43
43
43
30
30
30
30
29
29
29
29
29,30
29,30
35
35
35
35
35
32
31
32
33
33
34
34
33
33
33
33
33
33
33
33
33
34
34
33
33
33
33
32
35
35
27
27
24
24
22
22
24
26
26
24
26
V
W
Y
U
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
Numerical Index
152
For quotations and product pricing go to www.eleusa.com
Numerical Index
153
25-0480
25-0480/13
25-0482
25-0485
25-0530
25-0530/10
25-0533
25-0535
25-0537
25-0544
25-0560
25-0562
25-0567
25-0568
25-0618
25-0619
25-0620
25-0623
25-0650
25-0655
25-0660
25-0690
25-0690/10
25-0690/13
25-0690/14
25-0690/15
25-0690/17
25-0696/01
25-0696/02
25-0697/01
25-0697/02
25-0698
25-0699
25-3518/01
25-3518/02
25-3525/01
25-3525/02
25-3604
25-3650
25-3997
25-3998
25-4117
25-4159
25-4159/10
25-4159/11
25-4159/12
25-4170
25-4176
25-4178
25-4200
25-4210
25-4250
25-4261
25-4263
25-4281
25-4290
25-4300
25-4320
25-4330
25-4461
25-4520
25-4880
25-5050/10
25-5661
25-5663
25-5665
25-6430
25-6430/10
25-6441
25-6443
25-6461
25-6470
25-6480
25-6500
25-6561
25-6580
25-6585
25-6630
25-6641
25-6680
25-6690
25-6721
25-7610
25-7621
25-7623
25-7631
25-7640
25-7650
25-7661
25-7670
25-7761
26-2114/01
26-2114/02
26-2181
26-2181/10
26-2185
26-2189
26-2197
26-2213
26-2213/10
26-2217
26-2221
26-2223
26-2223/10
26-2261
26-2261/10
26-2261/12
26-2261/14
26-3346
26-3346/10
27-1108/02
27-1109/02
27-1121/01
27-1121/02
27-1495/01
27-1495/02
27-1502
27-1573
27-1581
27-1583
27-1587
27-1617
27-1620
27-1621
27-1633
27-1641
27-1649
27-1689
27-1697
27-1700
27-1706
27-1717
27-1750
27-1760
27-1765
27-1770
27-1790
27-1795
2800E
2810E
2820E
2824/02
29-3729
29-3729/10
29-3739
29-3741
29-3935
29-4292
29-4292/10
29-4294
29-4302
29-4342
29-4350
29-4355
29-4522
29-4522/10
29-4522/11
29-4522/13
29-4524
29-5450
29-5450/10
29-5455
29-5455/10
29-5460
29-5500
29-5500/10
29-5500/11
29-5500/12
29-5505
29-5510
29-5510/10
29-5510/11
3000/01
3000/02
3010E
3020E
3311-0015
34-0108
34-0110
34-0132
34-0134
34-0150
34-0152
34-0180
34-0580
34-0952
34-2850
34-2852
34-2854
34-2856
34-2860
34-2862
34-3265
34-3265/10
34-3265/12
34-3267
34-3267/10
34-3272
34-3280
34-3280/10
34-3592/02
34-4520
34-4570
34-5055
34-5065
34-5280
34-5282
34-5292
34-5292/10
34-5294
34-5294/10
34-5295
34-5300
34-5305
34-6093
34-6095
34-6095/10
34-6095/12
34-6100
34-6125/01
34-6125/02
34-6132
34-6132/10
34-6132/12
34-6134
34-6134/10
34-6134/12
34-6222/02
34-6430/02
34-6432
34-6763
34-6764
34-6765/01
34-6768/02
34-6775/02
34-6777/02
34-8100/02
34-8105
34-8504
34-8505
34-8507
34-8544
34-8545
34-8548
35-1450
35-1452
35-1475
35-1475/10
35-1480
35-1530
35-2165
35-2167
35-2170
35-2480/09
35-2505
35-2510
35-3968
35-4050
36-0640/01
36-0640/02
36-0640/06
36-0650/01
36-0650/02
36-0650/06
36-0718/01
36-0718/02
36-0718/06
36-3088/01
36-3088/02
36-3088/06
37-4855/09
37-4855/10
37-4855/35
37-4861/02
37-5500
37-5504
37-5508
37-5510
37-5512
37-5514
37-5516
37-5518
37-5520
37-5522
37-5524
37-5526
37-5528
37-5561
37-5570
37-5574/02
37-5574/06
37-5575
37-5625
37-5626
38-0620
38-0640
38-0652
3806E
38-1000
38-1000/10
38-1000/15
38-1200
38-2012
38-2620
38-2660
38-2670
38-2695
38-6002
38-6040
38-6080
39-0075/02
39-0075/10
39-0075/12
39-0412
39-0412/10
39-0414
39-0414/10
39-0414/12
39-0416
39-0420
39-0425
39-0430
39-0435
4204/02
42-0405
42-1000/02
42-1003
42-1700
42-1720
42-1725
26
26
26
26
24
26
26
22
22
24
25
20
20
20
21
21
21
21
19
19
19
18
18
18
18
18
18
14
14
14
14
14,15
14,15
10
10
11
11
28
28
28
28
12
12
12
12
12
12
12
12
12
10
12
13
13
13
13
13
13
13
13
12
13
12
18
18
18
12
12
13
13
13
13
13
13
13
13
13
12
13
13
13
13
13
13
13
13
13
13
13
13
13
22
22
23
23
23
23
23
23
23
23
23
23
23
48
48
48
48
49
49
10,11,16
10,11,16
28
28
5
5
5
6
6
6
6
7
16
16
8
7
7
7
7
4
7
8
4
4
4
4
5
5
45
46
46
42
48
48
47
47
47,92
37
37
37
37
37
36
36
36
36
36
36
36
39
39
39
39
39
38
38
38
38
38
38
38
38
70
70
81
81
122
82
82
79
82
82
82,144
81
83
83
84,97
84,97
84,97
84,97
84,97
84,97
79
79
79
79
79
80
80
80
66
72
72
72
72
71
71
71
71
71
71
71
73
73
69
69
69
69
70
69
69
70
70
70
70
70
70
67
67
67
68
68
68
68
68
68
84
84
94
94
94
94
94
94
76
76
74
74
74
74
78
78
76
74
75
75
77
77
59
59
59
58
58
58
57
57
57
56
56
56
60
60
59
56
56
56
58
56
56
58
58
56
57
58
57
56
58
56,57,58,59,62
59,61
61
61
56,57,61
66
66
90
90
90
91
90
90
90
90
91
91
91
92
93
93
93
93
87
87
87
88
88
88
88
88
89
88,89
89
89
89
96
98
96
96
96
96
96
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
Numerical Index
154
For quotations and product pricing go to www.eleusa.com
Numerical Index
155
42-3000A
42-3040
42-3050
42-5300/10
42-5305/02
45-3820/02
45-3825/02
45-3840
45-3842
45-3845
45-6310
45-6414
45-6416
45-6460
45-6462
45-6471/02
45-6475/02
45-6480
45-6832/02
45-6855
45-6892
45-6894
45-7500
45-7500/10
45-7500/12
45-7505
45-7505/10
45-7510
45-7520
45-7580
45-7580/10
45-7580/12
45-7580/14
45-9300
45-9301
45-9301/14
45-9310
45-9311
45-9315/01
45-9315/02
45-9315/10
45-9315/12
45-9315/14
45-9330
46-5290
46-5290/10
46-5297
46-5800
4699-0881
4699-1315
4699-1316
4699-1805
47-1460
47-1460/12
47-1460/14
5002/02
77-0115
77-0470
77-0480
78-0060
78-0160
78-0260
78-0460
78-0760
78-0860
78-5461
78-7090
78-7110
78-7130
78-7140
78-7142
78-7600
79-5000
79-5010
79-5020
79-5030
79-5040
79-5050
79-5060
79-5070
79-5080
79-5090
79-5100
79-5110
79-5120
79-5130
79-5140
79-5150
79-5160
79-5170
79-5180
79-5190
79-5200
79-5210
79-5220
79-5230
79-5240
79-5250
79-5260
79-5270
79-5280
79-5290
79-5300
79-5400
79-5405
79-5410
79-5415
79-5500
79-5510
79-5520
79-5530
79-5550
79-5560
79-5570
79-5580
79-5600
79-5610
79-5620
79-5630
79-5650
79-5660
79-5670
79-5680
79-5800
79-5810
79-5820
79-5830
79-5840
79-5850
79-5860
79-5870
79-5880
79-5890
79-5900
79-5910
79-5920
79-5930
79-5940
79-5950
79-5960
79-5970
79-5980
79-5990
79-6000
79-6010
79-6020
79-6030
79-6040
79-6050
79-6060
79-6070
79-6080
79-6090
79-6100
79-6150
79-6160
79-6165
79-6200
79-6210
79-6220
79-6230
79-6250
79-6260
79-6270
79-6280
79-6300
79-6310
79-6320
79-6330
79-6350
79-6360
79-6370
79-6380
79-7010
79-7015
79-7020
79-7025
79-7030
79-7040
79-7220
79-7225
79-7230
80-0400/01
80-0400/02
80-0400/10
80-0400/12
80-0400/14
80-0400/16
80-0400/18
80-0400/20
80-0400/22
80-0400/24
80-0400/26
80-0400/28
80-0400/30
80-0400/32
80-0400/34
80-0400/36
80-0400/38
80-0400/40
80-0400/42
80-0400/44
80-0400/46
80-0400/48
80-0400/50
80-0400/52
80-0400/54
80-0400/56
80-0400/58
80-0400/60
80-0400/62
80-0400/64
80-0400/66
80-0400/68
80-0400/70
80-0400/72
80-0400/74
80-0400/76
80-0400/78
80-0400/80
80-0400/82
80-0400/84
80-0400/86
80-0400/88
80-0400/90
80-0405/01
80-0405/02
80-0417/02
80-0420/01
80-0420/02
80-0445/02
80-0445/06
81-0701
88-0110/02
88-0130/02
88-0140/02
88-0151/01
88-0151/02
88-0156/02
88-0200/02
88-0210/02
88-0220/01
88-0220/02
88-0500/02
88-0530/02
88-1024/02
88-1034/02
88-1044/02
88-1054/02
88-1074/02
88-1084/02
88-1094/02
88-1104/02
88-1302/02
88-1424/02
88-1428/02
88-1500
88-1520
88-1600
88-1610
88-2000
88-2000/10
88-2010
88-2050
88-2052
88-2054
88-2056
88-2060
88-3000/02
88-3100/02
88-3110/02
88-3115
88-4000
88-4010
88-4020
88-4040
88-4060
88-4070
88-4080
88-4100
88-4110
88-4120
88-4130
88-4150
88-4152
88-4154
88-4156
88-4160
88-4194
88-4210
88-4310/02
88-4340
88-4400
88-4420
88-4420/12
88-4420/14
88-4434
88-4450
88-4452
88-4454
88-4456
88-4460
88-4462
88-4464
88-4466
88-4468
88-4474
88-4480NT
88-4490
88-4494
88-4498
88-4610
88-6002A
88-6007
88-6010
88-6012
88-6024
88-6028
88-6030
88-6104
88-6106
88-6108
88-6110
88-6112
88-6200
88-6202
88-6230
88-6304
88-6610
88-6612
98
98
98
99
99
112
112
112
112
112
102,104
102,105
102,105
102,105
102,104
106
102,106
102,104
102
102,103
102,103
102,103
107
107
107
107
107,108
107
107
108
108
108
108
110,111
110,111
110
110,111
110,111
111
111
111
111
111,141
111
113
113
113
113
42
57
56
122
109
109
109
102
100
100
100
10,135
10,135
10,135
10,135
10,135
10,102,135
135
91
91
91
131
131
99,131
99,119
119
96,99,119
119
119
119
99,119
119
99,119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
99,119
119
99,119
119
119
99,119
119
99,119
119
99,119
119
119
119
99,119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
119
99,119
99,119
119
119
119
119
119
119
119
119
99,119
119
119
119
99,119
99,119
99,119
119
119
120
120
120
120
120
120
120
119,120
119,120
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
115
116
117
117
116
116
69
125
99,125
125
126
126
126
126
126
126
126
127
127
128
128
128
128
128
128
128
128
129
129
129
130
130
130
130
132
132
132
133
133
133
133
133
133
111,134
14,134
134
136
136
136
136
136
24,136
24,136
22,107,136
10,22,136
24,136
24,136
136
136
136
136
136
32
94,136
139
113,139
137
137
137
137
139
138
138
138
138
138
138
138
138
138
138
138
138
138
138
139
140
140
140
112,140
140
140
140
141
141
141
141
141
141
141
111
141
141
141
Tel: 1-800-323-1242 Fax: 1-970-663-9781 Email: [email protected]
Numerical Index
156
For quotations and product pricing go to www.eleusa.com
Terms and Conditions of Sale
157
In accordance with the usage of trade, if you do not object to the following terms and conditions within a reasonable time Seller may presume you have accepted all of these terms and conditions. Any objection must (1) be in writing, (2) list specifically each term or condition with which you disagree, (3) indicate why you disagree with the term or condition. Seller will not accept your standard agreement, contract, or your boilerplate terms or conditions as a valid objection unless your objection to Seller’s Terms and Conditions has been clearly indicated as required above.
COMPLETE AGREEMENT: All proposals, negotiations, representations, and quotations, if any, regarding this transaction and made prior to the date of this document are merged herein.
PRICES: All prices indicated in this document or quoted in another document or proposed in another document or at another time, shall be adjusted to Seller’s prices in effect at the time of shipment unless expressly otherwise agreed upon in writing.
If transportation charges from point of origin of the shipment to a designated point are included in these prices:
(a) any changes in such transportation charges shall be the Buyer’s responsibility, and
(b) except as otherwise stated inSeller’s quotation, Seller shall not be responsible for switching, spotting, handling, storage, demurrage or any other transportation or accessorial service, nor for any charges incurred therefor, unless such charges are included in the applicable freight rate from shipping point to the designated point.
CANCELLATION: Buyer may cancel orders subject to fair charges for expenses incurred, handling, inspection, restocking, freight and invoicing charges as applicable. Cancelled orders must be returned to Seller within 30 days at Buyer’s expense.
TAXES: Any taxes which Seller may be required to pay or collect, under any existing or future law, upon or with respect to the sale, purchase, delivery, storage, processing, use or consumption of any of the material covered hereby, including taxes upon or measured by the receipts from the sale thereof, shall be paid for by Buyer. Seller will collect and pay taxes when required to do so unless Buyer furnishes a valid resale/exemption certificate to Seller relieving Seller of the requirement to collect and pay such taxes. If the certificate furnished to Seller is held invalid Buyer agrees to pay the taxes (plus interest) not collected as a result of relying on Buyer’s invalid certificate.
DELAY: Seller shall be excused for any delay in performance or delivery due to acts of God, war, riot, embargoes, acts of civil or military authorities, fire, floods, accidents, quarantine restrictions, factory conditions, strikes, labor disputes, delays in transportation, shortage of transport vehicles, labor or materials, or any circumstance or cause beyond the control of Seller in the reasonable conduct of its business. Seller further reserves the right, in its full discretion, to allocate inventories and current production and to substitute suitable materials when, in its opinion, circumstances warrant such allocation or substitution.
DELIVERY: Delivery of goods to the first carrier shall constitute delivery to Buyer. Buyer shall bear all risk of loss or damage in transit. Buyer shall be responsible to file claims with any carrier for damage occurring during shipment. Seller reserves the right to make delivery in installments and backorder goods unless Buyer expressly states otherwise in Buyer’s purchase order. All such installments and backorders shall be separately invoiced and paid for when due, without regard to subsequent deliveries. Delay in delivery of an installment or backorder shall not relieve Buyer of its obligation to accept remaining deliveries.
INSPECTION: Buyer may inspect, or provide for inspection at the point of receipt of shipment. Buyer shall inspect goods immediately. All claims for alleged defects in goods are waived unless Seller is notified of the claim within 30 days after receipt of shipment. No claim shall be effective if made after the goods have been altered or used. Buyer shall afford Seller prompt and reasonable opportunity to inspect all goods to which any claim is made. No material shall be returned without Seller’s express consent, a return authorization and return instructions.
WARRANTIES: Seller warrants to the original Buyer that the goods furnished under this Agreement will conform to the express written warrantypertaining to the specific goods purchased. Warranties are not extended to consumable items such as, without limitation, batteries, mercury cells, light bulbs. EXCEPT AS EXPRESSLY SET FORTH IN THE PRECEDING SENTENCE, SELLER MAKES NO WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO ANY GOODS FURNISHED HEREUNDER.SELLER EXPRESSLY DISCLAIMS ANY WARRANTIES IMPLIED BY LAW, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
REMEDIES: If Seller breaches any warranty provided to the Buyer, and if the Buyer notifies Seller of such breach within 30 days following the end of the warranty period applicable thereto, Seller shall, at its option, either replace or repair the nonconforming goods or refund all amounts paid by the Buyer to Seller for such goods. THIS IS THE EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY. The sole purpose of this remedy is to provide the Buyer with the repair or replacement of goods or, at Seller’s option, to refund the price paid by the Buyer hereunder. This remedy shall not be deemed to have failed of its essential purpose so long as Seller is willing to take one of those actions.
DAMAGES: IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER FOR BREACH OF ANY WARRANTY, FOR BREACH OR REPUDIATION OF ANY OTHER TERM OR CONDITION OF THIS AGREEMENT, FOR NEGLIGENCE, ON THE BASIS OF STRICT LIABILITY, OR OTHERWISE.
PERMISSIBLE VARIATIONS, STANDARDS AND TOLERANCES: Except as expressly specified by Buyer and expressly agreed to in writing by Seller, all material shall be produced in accordance with Seller’s standard practices. All material, including that produced to meet an exact specification, shall be subject to tolerances and variations consistent with usages of the trade and regular practices concerning: dimension, weight, packaging, composition and mechanical properties, normal variations in surface, internal conditions and quality, deviations from tolerances and variations consistent with practical testing and inspection methods and practices concerning over and under-count of goods.
PATENTS: Seller shall indemnify the Buyer against any judgment for damages and costs which may be rendered against the Buyer in any suit brought on account of the alleged infringement of any United States patent by any product supplied by Seller hereunder, unless made in accordance with materials, designs or specifications furnished or designated by the Buyer, in which case the Buyer shall indemnify Seller against any judgment for damages and costs which may be rendered against Seller in any suit brought on account of the alleged infringement of any United States patent by such product or by such materials. Prompt written notice shall be given to the party from whom indemnity is sought of the bringing of the suit and an opportunity shall be given such party to settle or defend it as that party may see fit and that every reasonable assistance in settling or defending shall be rendered to the indemnifying party by the party seeking indemnification.Neither Seller nor the Buyer shall in any event be liable to the other for special, indirect, incidental or consequential damages arising out of or resulting from infringement of patents.
INSTALLATION: Installation and service of Seller instruments are covered under separate agreement.
LIMITATIONS ON USAGE: The Buyer shall not use any goods delivered hereunder for any purpose other than that identified in Seller’s catalogs and literature as the intended use of such goods.Unless Seller has otherwise advised the Buyer in writing, in no event shall any goods delivered hereunder be used in drugs, food additives, food or cosmetics, whether for humans or animals. In no event shall goods stipulated by Seller as intended for research and development use be used in a manufacturing process or in manufactured products. Any warranty granted by Seller to the Buyer shall be deemed void if any goods covered by such warranty are used for any purpose not permitted hereunder. In addition, the Buyer shall indemnify Seller and hold Seller harmless from and against any and all claims, damages, losses costs, expenses and other liability of whatever nature that Seller suffers or incurs by reason of any such unintended use.
PAYMENT AND CREDIT: Payment is due thirty (30) days from the date of invoice. Buyer agrees to pay taxes appearing on the invoice or furnish Seller with a valid resale/exemption certificate no later than the time of payment.Seller reserves the right to deny credit to Buyer. Seller reserves the right to determine the suitability of the method of payment where payment is other than cash, certified check or money order. Seller reserves the right to revoke credit previously extended to Buyer because of Buyer’s failure to pay for goods when due or of any other reason deemed good and sufficient by Seller, and in such event all subsequent shipments shall be paid for in advance oron delivery. Past due balances shall be subject to interest charges at the maximum rate permitted by law.
COMPLIANCE WITH LAWS: Seller and Buyer agree to comply with all laws applicable to the goods sold hereunder.
APPLICABLE LAW: The laws of the State of Colorado shall govern this agreement and its provisions.
88-6700
88-6712
88-6718
88-6802
88-6804
88-6810
88-6812
88-7004
88-7008
88-7022A
88-7026
88-7028
88-7040
88-7042
88-7100
88-7110
88-7120
88-7130
88-7140
88-7150
88-7180
88-7202
88-7300
88-7302
88-7310
88-7312
88-7400
88-7500
88-7520
88-7600
88-7700
88-7810
88-7820
88-7910
88-7920
88-7940
88-7960
88-8050
9417-0001
9417-0006
9806-0016
CT-992
PR-100
PR-60
T-308
T-319
T-324
T-780
112,141
112,142
142
142
142
142
142
143
143
113,143
113,143
113,143
143
143
144
144
144
144
144
96,112,144
144
144
145
145
145
145
145
145
145
145
145
122,146
146
146
146
146
146
146
27
27
56
58
135
135
21
21
21
12